IR Receiver Modules for Remote Control Systems

Size: px

Start display at page:

Download "IR Receiver Modules for Remote Control Systems"

Tabitha Farmer
7 years ago
Views:

1 IR Receiver Modules for Remoe Conrol Sysems FEATURES Very low supply curren Phoo deecor and preamplifier in one package Inernal filer for PCM frequency Improved shielding agains EMI Supply volage: 2.5 V o 5.5 V Improved immuniy agains ambien ligh Insensiive o supply volage ripple and noise Maerial caegorizaion: For definiions of compliance please see MECHNICAL DATA Pinning for : = OUT, 2 = GND, 3 = V S DESCRIPTION These producs are miniaurized receivers for infrared remoe conrol sysems. A PIN diode and a preamplifier are assembled on a lead frame, he epoxy package acs as an IR filer. The demodulaed oupu signal can be direcly decoded by a microprocessor. The is compaible wih all common IR remoe conrol daa formas and can suppress almos all spurious pulses from energy saving fluorescen lamps. This componen has no been qualified according o auomoive specificaions. PARTS TABLE CARRIER FREQUENCY STANDARD APPLICATIONS (AGC2) 38 khz BLOCK DIAGRAM APPLICATION CIRCUIT Inpu AGC Demo- dulaor Band pass 3 kω 3 77_5 Transmier wih TSALxxxx IR receiver Circui V S OUT GND R C V O µc + V S GND PIN Conrol circui 2 R and C are recommended for proecion agains EOS. Componens should be in he range of 33 Ω < R < kω, C >. µf. Rev.., 9-Mar-3 Documen Number: 75x ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

2 ABSOLUTE MAXIMUM RATINGS PARAMETER TEST CONDITION SYMBOL VALUE UNIT Supply volage V S -.3 o + 6 V Supply curren I S 3 ma Oupu volage V O -.3 o (V S +.3) V Oupu curren I O 5 ma Juncion emperaure T j C Sorage emperaure range T sg - 25 o + 85 C Operaing emperaure range T amb - 25 o + 85 C Power consumpion T amb 85 C P o mw Soldering emperaure s, mm from case T sd 26 C Noe Sresses beyond hose lised under Absolue Maximum Raings may cause permanen damage o he device. This is a sress raing only and funcional operaion of he device a hese or any oher condiions beyond hose indicaed in he operaional secions of his specificaion is no implied. Exposure o absolue maximum raing condiions for exended periods may affec he device reliabiliy. ELECTRICAL AND OPTICAL CHARACTERISTICS (T amb = 25 C, unless oherwise specified) PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT E v =, V S = 3.3 V I SD ma Supply curren E v = 4 klx, sunligh I SH.45 ma Supply volage V S V Transmission disance Oupu volage low Minimum irradiance Maximum irradiance Direciviy E v =, es signal see fig., IR diode TSAL62, I F = 5 ma I OSL =.5 ma, =.7 mw/m 2, es signal see fig. Pulse widh olerance: pi - 5/f < po < pi + 6/f, es signal see fig. pi - 5/f < po < pi + 6/f, es signal see fig. Angle of half ransmission disance d 45 m V OSL mv min..8.5 mw/m 2 max. 3 W/m 2 /2 ± 45 deg TYPICAL CHARACTERISTICS (T amb = 25 C, unless oherwise specified) V O V OH Opical Tes Signal (IR diode TSAL62, I F =.4 A, 3 pulses, f = f, = ms) pi * T * pi /f is recommended for opimal funcion Oupu Signal 6 ) 7/f < d < 5/f V OL 2) pi - 5/f < po < pi + 6/f po - Oupu Pulse Widh (ms) Oupu Pulse Widh Inpu Burs Lengh λ = 95 nm, Opical Tes Signal, Fig. d ) po 2) Irradiance (mw/m²) Fig. - Oupu Acive Low Fig. 2 - Pulse Lengh and Sensiiviy in Dark Ambien Rev.., 9-Mar-3 2 Documen Number: 75x ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

3 V O V OH V OL Opical Tes Signal 6 µs 6 µs = 6 ms Oupu Signal, (see fig. 4) on off min. - Threshold Irradiance (mw/m²) Correlaion wih Ambien Ligh Sources: W/m² =.4 klx (Sd. illum. A, T = 2855 K) W/m² = 8.2 klx (Dayligh, T = 59 K) Wavelengh of Ambien Illuminaion: λ = 95 nm.. - Ambien DC Irradiance (W/m²) Fig. 3 - Oupu Funcion Fig. 6 - Sensiiviy in Brigh Ambien T on, T off - Oupu Pulse Widh (ms) λ = 95 nm, Opical Tes Signal, Fig. 3 T on T off. - Irradiance (mw/m²) min. - Threshold Irradiance (mw/m 2 ) f = f f = 3 khz f = khz f = Hz ΔV S RMS - AC Volage on DC Supply Volage (mv) Fig. 4 - Oupu Pulse Diagram Fig. 7 - Sensiiviy vs. Supply Volage Disurbances min. / - Rel. Responsiviy f = f ± 5 % Δ f(3 db) = f / f/f - Relaive Frequency Max. Envelope Duy Cycle f = 38 khz, = 2 mw/m² Burs Lengh (number of cycles/burs) Fig. 5 - Frequency Dependence of Responsiviy Fig. 8 - Max. Envelope Duy Cycle vs. Burs Lengh Rev.., 9-Mar-3 3 Documen Number: 75x ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

4 min. - Threshold Irradiance (mw/m 2 ) T amb - Ambien Temperaure ( C) Fig. 9 - Sensiiviy vs. Ambien Temperaure p2 d rel - Relaive Transmission Disance Fig. - Horizonal Direciviy S (λ) rel - Relaive Specral Sensiiviy λ- Wavelengh (nm) min. - Sensiiviy (mw/m 2 ) V S - Supply Volage (V) Fig. - Relaive Specral Sensiiviy vs. Wavelengh Fig. 2 - Sensiiviy vs. Supply Volage Rev.., 9-Mar-3 4 Documen Number: 75x ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

5 SUITABLE DATA FORMAT These producs are designed o suppress spurious oupu pulses due o noise or disurbance signals. Daa and disurbance signals can be disinguished by he devices according o carrier frequency, burs lengh and envelope duy cycle. The daa signal should be close o he band-pass cener frequency (e.g. 38 khz) and fulfill he condiions in he able below. When a daa signal is applied o he IR receiver in he presence of a disurbance signal, he sensiiviy of he receiver is reduced o insure ha no spurious pulses are presen a he oupu. Some examples of disurbance signals which are suppressed are: DC ligh (e.g. from ungsen bulb or sunligh) Coninuous signals a any frequency Srongly or weakly modulaed noise from fluorescen lamps wih elecronic ballass (see figure 4 or figure 5) IR Signal Time (ms) Fig. 3 - IR Signal from Fluorescen Lamp wih Low Modulaion IR Signal Time (ms) Fig. 4 - IR Signal from Fluorescen Lamp wih High Modulaion Minimum burs lengh cycles/burs Afer each burs of lengh a minimum gap ime is required of o 7 cycles cycles For burss greaer han a minimum gap ime in he daa sream is needed of 7 cycles > 4 x burs lengh Maximum number of coninuous shor burss/second 8 Recommended for NEC code Recommended for RC5/RC6 code Recommended for Sony code Recommended for Thomson 56 khz code Recommended for Misubishi code (38 khz, preburs 8 ms, 6 bi) Recommended for Sharp code Suppression of inerference from fluorescen lamps Mos common disurbance signals are suppressed Rev.., 9-Mar-3 5 Documen Number: 75x ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

6 PACKAGE DIMENSIONS in millimeers (5.55) ± max max..7 max nom nom marking area No indicaed olerances ±.2 Drawing-No.: Issue: 9; R 2.5 echnical drawings according o DIN specificaions Rev.., 9-Mar-3 6 Documen Number: 75x ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

IR Receiver Modules for Remote Control Systems

IR Receiver Modules for Remote Control Systems TSOP382.., TSOP384.. IR Receiver Modules for MECHANICAL DATA Pinning: = OUT, 2 =, 3 = V S 926 FEATURES Very low supply curren Phoo deecor and preamplifier in one package Inernal filer for PCM frequency