Augmented Reality and Automotive Glazing Innovative Trends Lightweight Technologies Automotive Design and Auto Glass

Transcription

1 REGISTER BY 4 SEPTEMBER AND SAVE th International CTI Conference 3 4 November 2015 Sofitel Berlin Kurfürstendamm Augmented Reality and Automotive Glazing Innovative Trends Lightweight Technologies Automotive Design and Auto Glass

2 2 CONFERENCE DAY 1 Tuesday, 3 November 2015 CHAIRMEN Wolfgang Erner, Technology Manager Europe, Pilkington Automotive Gerald-Alexander Beese, Head of Strategic Project Management, KTI Reception with business breakfast Welcome address by CTI and opening by chairmen Follow up: DESIGNING THE ULTIMATE SUPERCAR Car Design Aspects and Automotive Glazing Meeting the expectations of supplier, OEM, designer and customer teamwork Technology and materials challenges for car designers Super car concept: material and glass possibilities Evolving Considerations for PC Glazing Technology Relevant automotive trends Performance benefits Regulatory progress Dr Matteo Terragni, Automotive Glazing Segment Manager, SABIC Polycarbonate Solving Future Design Requirements Current trends in car design Performance of different glazing materials Changing regulations Philipp Möller, Key Account Manager, Bayer Material Science AG David Hilton, Auto Designer, Motorcity Europe Ltd Discussion Coffee break in the Exhibition Area How do we move about tomorrow? What are the major changing factors? What are the main players of tomorrow and why? How will it affect our lives? Frank M. Rinderknecht, Founder and CEO, Rinspeed AG Novel Wet Coating Technologies for Glass Overview of glass coating technologies Existing applications of wet chemistry coating in automotive applications Novel functionalities Potential automotive applications New Lightweight Glazing Design for Automotive Glazing Applications Lightweight design continues to be focus topic for Automotive industry Automotive glazing offers additional opportunities to reduce vehicle weight above the belt line A new lightweight glazing concept will be reviewed using Corning Gorilla Glass in a hybrid laminate construction Shirley Sergeant, Group Portfolio Manager, NSG Group Mike Greenall, Global Automotive R&D Program Director, NSG Group New PLEXIGLAS Molding Compound for Automotive Glazing Target applications and market expectation Challenges of development and final properties Key benefits at system level Thomas Leonhard, Global Sales Director, Corning Incorporated Sven Augustin, Head of Market Team, Evonik Industries AG Introduction of Exhibitors & Sponsors Lunch break in the Exhibition Area

3 3 CONFERENCE DAY 2 Wednesday, 4 November PANEL DISCUSSION The responsibility of the OEM for the System D-FMEA Gap- and Flushness-Chart Reference points and tolerance chain to car body Common material choice and space optimization Equal quality AGR=OES, exchange and calibration DISCUSSION LEADER: Chairman Wolfgang Erner, Pilkington Automotive INVITED FOR DISCUSSION: Representatives from Volkswagen, Ford, Vallo & Vogler, Pöppelmann Reception N-Glaze / Surface Technologies to Enhance Glazing Components System provider for surface technologies Broad variety for application technique N-Glaze security for special vehicle N-Glaze application examples for automotive Michael Jung, Member of the Board (COO), Nanogate AG Discussion & Remarks for Day End of the first Conference Day D-Surface Inspection and Measurement for Automotive Glazing Performance of modern inspection solutions Reliable results for the process optimization Quantifiable results for objective quality graduations 6.00 CTI invites you for a drink in the Exhibition Area and an Evening Event in the heart of Berlin in a relaxed atmosphere. Take this great opportunity to deepen your conversations and to enhance your network. Jens Kayser, Senior Key Account Manager Glass, ISRA VISION ADAS Influence on replacement Costs of Windshields Facts about glass claims for German insurance companies Development of costs Challenges for professional and efficient repairs Gerald-Alexander Beese, Head of Strategic Project Management, KTI GmbH & Co. KG - Kraftfahrzeugtechnisches Institut Discussion Lunch break in the Exhibition Area Antenna Integration in Glass: Because everybody needs them but nobody wants to see them! Connected car trends & implications on antenna system Glass as a key automotive part to embed antenna One supplier, one responsibility for a faster and more efficient development What s next? MEDIA PARTNERS Antoine Luijkx, Product Strategy Manager, AGC Automotive Europe

4 4 ADVISORY BOARD Solution through new PVB Interlayer Films with thinner Glass for Weight Reduction Interlayer film which retain required qualities for vehicle glazing even though thinner glass is used Test results for acoustic property and mechanical property with thinner glass Additional beneficial functions (shatter proof, UV-protection and cabin heat reduction) Daizo Ii, Chief Engineer, SEKISUI S-LEC Stress Measurement in Automotive Glazing Scattered light method for internal stress Polariscope SCALP Automatic measurement of complicated stress fields Stress anisotropy Dr Johan Anton, CEO, GlasStress Ltd. Steven Antaya, Vice President Marketing, Antaya Technologies Eric Biribuze, Product Line Manager, Corning Inc Volker Carneiro, Technical Lead Fixed Glass Systems, General Motors Europe Wolfgang Erner, Technology Manager Europe, Pilkington Group Thomas D Hagen, former Glass & Moldings GSSL Leader, General Motors Company Hagen Rakus, Technical Specialist Automotive Glazing, Volkswagen AG Dr Matteo Terragni, Automotive Glazing Segment Manager, SABIC PVB interlayers for Head-up Display applications Eastman Introduction HUD Principle HUD market overview and growth drivers Existing and future technologies and challenges Eastman HUD interlayer solutions Ingo Kramer, Senior Applications Development Manager, Eastman Chemical Company Discussion and Closing Remarks Refreshment break in the Exhibition Area End of the Conference»Clear Recommendation!«Volker Carneiro, GM Europe»Great opportunity to see aspects of auto glass related technology, and good background for OEM glass designers / engineers!«peterson, Honda R&D Americas, Inc.»A good overview of technology!«fowler, PMA Tools Inc.

5 SPONSORING & EXHIBITION SPONSOR OF LANYARDS Evonik Performance Materials GmbH The segment's global activities focus on the development and production of polymer materials and intermediates, mainly for the rubber and plastics industries. Evonik Performance Materials is a worldwide manufacturer of PMMA products sold under the PLEXIGLAS trademark on the European, Asian, African and Australian continents and under the trademark ACRYLITE in the Americas. For the automotive industry a wide range of products for different applications (e.g. glazing) are available. Evonik Performance Materials GmbH Kirschenallee, Darmstadt EXHIBITORS Antaya is a global supplier of pre-soldered, pre-fluxed connectors and controlled soldering equipment for the automotive glass industry. Connectors are supplied with both leaded and lead-free solder. Antaya Technologies has the only drop-in lead-free soldering solution for the automotive glass industry proven to meet global automotive standards including SAE USCAR 40 and AK 2.1 (ACEA standard). Over 10 million lead free connectors have been installed in vehicles worldwide since Antaya Technologies 72 Fenner St., / Cranston RI, USA With 2014 sales of EUR 11.7 billion, Bayer MaterialScience is among the world s largest polymer companies. Business activities are focused on the manufacture of high-tech polymer materials and the development of innovative solutions for products used in many areas of daily life. The main segments served are the automotive, electrical and electronics, construction and sports and leisure industries. Bayer MaterialScience has 30 production sites around the globe and employed approximately 14,200 people at the end of Bayer MaterialScience is a Bayer Group company. Bayer MaterialScience AG Leverkusen Eastman is a global specialty chemical company that produces a broad range of products found in items people use every day. With a portfolio of specialty businesses, Eastman works with customers to deliver innovative products and solutions while maintaining a commitment to safety and sustainability. Its market-driven approaches take advantage of world-class technology platforms and leading positions in attractive end-markets such as transportation, building & construction, and consumables. Eastman Nanogate is a leading international integrated systems provider for high-performance surfaces. The Group enables the programming and integration of additional properties such as non-stick, scratchproof and anti-corrosive into materials and surfaces. True to its slogan 'A world of new surfaces', Nanogate opens up for companies the diverse possibilities of multifunctional surfaces based on new materials. Within the automotive industry especially various N-Glaze plastic components as well as multi-functional coating systems are used. Nanogate AG Zum Schacht 3, Göttelborn Sekisui is a leading worldwide company with over 40 years of experience in glass interlayer technology. Our success is based on delivering the 3 S's - Service, Speed and product Superiority. This is made possible by our excellent production facilities, technical support teams and a network that enables us to meet all our customers' needs. Sekisui S-Lec BV Metaalweg 5, 6045 JB Roermond MOELLER-WEDEL OPTICAL is a leading manufacturer of high-precision optical test equipment. MOELLER-WEDEL OPTICAL will present the Secondary Image Angle Measuring Instrument for the testing of windshields. Amongst others MOELLER-WEDEL OPTICAL also offers visual and electronic autocollimators for e.g. wedge angle measurement, collimators, telescopes and interferometers. MÖLLER-WEDEL OPTICAL GmbH Rosengarten 10, Wedel

6 Ihr persönlicher Anmeldecode INFOLINE +49 (0) We will be happy to answer your questions about the conference program, sponsoring and exhibition: CUSTOMER SERVICE & REGISTRATION Elisabeth Janik Phone: +49 (0) CONTENT & CONCEPTION Elisa Ansar, Conference Producer Phone: +49 (0) SPONSORING & EXHIBITION Şenel Çelik, Sales Manager Phone: +49 (0) th International CTI Conference 3 4 November 2015 Sofitel Berlin Kurfürstendamm REGISTER BY 4 SEPTEMBER AND SAVE 200 REGISTER ONLINE NOW! registration@car-training-institute.com Phone: +49 (0) CONFERENCE VENUE AND ACCOMMODATION Sofitel Berlin Kurfürstendamm Augsburger Straße 41, Berlin, Germany Phone: +49 (0) The conference hotel reserves a limited allocation of rooms available at a reduced price. Please arrange room reservations directly with the hotel quoting the reference CTI Conference. PRICE Conference 3 and 4 November 2015 EARLY BIRD PRICE up to 4 September 2015 EARLY BIRD PRICE up to 2 October 2015 A substitute may attend in your place at no additional cost. The fee covers catering, access and full conference documents. The conference documents are available two weeks after the conference at the price of 495 excl. VAT Please find CTI s eligibility requirements online at: REGULAR PRICE from 3 October ,899 * 1,999 * 2,099 * * excl. VAT per person [P M012] At the first evening of the conference, the Sofitel Berlin Kurfürstendamm invites you to a welcome drink. DATA PROTECTION CTI is a division of EUROFORUM Deutschland SE. We use the data collected in connection with your order and use of our services and products within the applicable legal limits for the purpose of performing our services, and to provide you with information by post and about further offers by us, companies of our Group or cooperation partners, which are similar to the services of which you availed yourself previously. If, during the use of the data, it is transmitted to countries lacking an adequate level of data protection, we will create sufficient guarantees to protect the data. Furthermore, we will use your data if you have given us your consent to do so. You may object to the use of your data for advertising purposes or to being contacted by or fax at any time by contacting EUROFORUM Deutschland SE, Postfach , Düsseldorf, Germany. Our customer services (Phone: +49 (0) ) shall be pleased to accept requests for changes.