STEVENAGE SKILLS CENTRE PART-TIME AND SHORT COURSES

STEVENAGE SKILLS CENTRE PART-TIME AND SHORT COURSES March - July 2013 Competency Development Up-Skilling & Re-Training Industry Standard Professional Development ELECTRICAL RENEWABLE ENGINEERING CONSTRUCTION HEALTH AND SAFETY

Accreditation bodies we work with The Stevenage Skills Centre The Stevenage Skills Centre offers high quality training in a modern environment. Our facilities consist of five purpose built units offering courses in welding, electrical, renewable, Green Deal, motor mechanics, engineering, plumbing, insulation, valeting, plastering and painting. Our courses are full and part-time, evening and weekend. We work with the main awarding bodies such as City and Guilds, ABBE, IMI and EAL to offer accredited qualifications. 01 02

North Hertfordshire College Welcome... North Hertfordshire College (NHC) is an entrepreneurial college, where the ethos, values and culture of students, tutors and leaders is distinctively geared towards the task of wealth creation, business formation and growth and employment outcomes. Students include those aged 16 18 studying full time as well as adults studying management and professional courses and evening leisure courses. North Hertfordshire College is one of five founder members of the Gazelle Colleges Group. The aim of the Gazelle Colleges Group is to work towards the transformation of the groups colleges through enterprise and entrepreneurship. Gazelle aims to provide an opportunity to engage with established entrepreneurs, young entrepreneurs and innovators, and to bring that experience into the heart of Further Education. Welcome to North Hertfordshire College s part-time and short course guide for programmes offered within the engineering and construction sectors. This guide will offer you further information on the wide variety of training delivered by the college. We pride ourselves in serving the needs of not only the 16-18 year old community, but also that of employers. It is vital that businesses can access the training and support required to develop employees and open up new opportunities within their industry. The Stevenage Skills Centre has been designed to offer the best possible learning environment with a great mix of study areas and practical workshops. Our fully accredited industry qualifications are delivered by our own specialist trainers and assessors. North Hertfordshire College is an Investors in People employer and prides itself in sourcing the right people to support our learners in their career development. We look forward to welcoming you to the College and supporting you on your professional journey. Keith Turner Assistant Principal For more information how we can support you or your business, please contact our Head of Commercial Operations: Laurent Lemaitre LaurentLemaitre@nhc.ac.uk 01462 424327 03 04

Contents Five reasons to study at the Stevenage Skills Centre 01. Accreditation bodies we work with 02. The Stevenage Skills Centre 03. About North Hertfordshire College 04. Welcome 05. Contents 06. Five reasons to study at the Stevenage Skills Centre 07. Electrical courses 11. Renewable energy courses 15. Engineering courses 19. Valeting courses 21. Health and Safety courses 25. Bespoke training, funding and group bookings 26. Payment and funding options 27. Apprenticeships 29. How to find us - Stevenage Skills Centre 30. How to find us - Goldsmith Centre 01. Our engineering and construction programmes are designed for smaller group sizes ensuring a personal learning experience. 03. We offer flexible delivery options with a mix of day and evening courses. 02. NHC has been awarded with the Investors in People Gold Award. We pride ourselves in providing outstanding teaching and lecturing staff. Our trainers are all highly skilled with many years of experience within their specialist trade. 04. Our focus is always on offering a hands-on and practical experience, so skills learnt can immediately be transferred to the workplace. 05. The Stevenage Skills Centre is easily accessible, within two minutes of the train station by foot. From Stevenage train station there are quick and easy connections to London (20-25mins), Cambridge (30-35mins) and Peterborough (30-40mins). We are also only a short distance from the A1M and parking is available on site. 05 06

Electrical Electrical Introduction Our electrical courses have been designed to meet the demands of those working in this growing sector. These courses can help you enhance your knowledge and understanding in an ever-changing working environment or provide you with the platform to enter this sector for the first-time. Whether you are looking for a qualification in 17th Edition Wiring Regulations or PAT testing, our portfolio of courses have been designed with the needs of the job market in mind. 07 C&G 2365 Electrical Installation Level 2 The City & Guilds 2365 at Level 2 is now the recognised route into the electrical installation industry (from 2012) and will cover underpinning knowledge necessary to work as an electrician. Who is this course for? This course is suited to those people looking to move into the electrical industry or people who require a recognised qualification. The course contains delivery around both the theoretical and practical aspects of the job role of an electrician, forming the underpinning skills and knowledge for access onto the level 3 programme. City and Guilds 2365 - Diploma in Electrical Installations Level 2 (Buildings and Structures) Tues and Thurs 6pm to 9pm 46 weeks Start date 23rd April 1350 Inspection and Testing of Electrical Equipment (PAT) This course has been designed to learn how to PAT test electrical equipment and certify it as being safe to use. We will take you through the practical and formalised recording processes. Who is this course for? PAT testing can be taught to a wide range of people including maintenance staff or landlords. Some basic electrical knowledge is useful but not essential. City and Guilds 2377-22 In-Service Inspection and Testing of Electrical Equipment Day course - Wednesday and Thursday 9am to 5pm. There may be an additional day for those not working in the industry. Evening course - Tuesday evenings from 6pm to 9pm for 5 weeks. Possibly additional week for those not from the industry. Start Date 17th April (day course) 7th May (evening course) 395 17th Edition Wiring Regulations This qualification ensures you are up to date with the latest industry regulation on wiring and the safe use and operation of electrical equipment and systems. It covers the 17th edition of the IEE Wiring Regulations, which came into force in June 2008. These regulations are recognised by the British Standards Institute as a British Standard (BS7671). Electricians who install or maintain electrical systems, in either the industrial, commercial or domestic sectors. Level 3 Award in the Requirements for Electrical Installations BS 7671: 2008 (2382-12) Wednesday 6pm to 9pm - 10 weeks 13th March 395 We are also running this course as a combined suite (2382-12,2393,2392-10) starting on the 24th April. 08

Electrical Electrical Combined Electrical Course (City & Guilds 2382-12,2393,2392-10) 17th Edition Wiring Regulations plus Fundamental Inspection, Testing and Initial Verification and Building Regulations for Electrical Installations in Dwellings Fundamental Inspection, Testing and Initial Verification This course will enable those carrying out work in domestic installations to verify their own work as required by Part P of the Buildings Regulations. Candidates who have a basic knowledge and understanding of electrical science principles and experience of electrical installation, working either within the electrical contracting industry or similar trade. Level 2 Certificate in Fundamental Inspection, Testing and Initial Verification (City & Guilds 2392-10). Building Regulations for Electrical Installations in Dwellings This qualification is designed to provide practising electricians, already operating in the domestic environment, an upgrade to their existing knowledge to incorporate an understanding of how electrical installations in dwellings must comply with all relevant Building Regulations. This course is for qualified and experienced electricians who want to upgrade their knowledge and qualifications to encompass the Part P building regulations and be able to register with a governing body and work as a domestic Part P installer. Building Regulations for Electrical Installations in Dwellings (City & Guilds 2393) Wednesday and Thursday 6pm to 9pm 9 weeks plus exam Start Dates 24th April Combined Course 880 Combined Electrical Course (City & Guilds 2394,2395) 2394 Initial and Fundamental Inspection and Testing. plus 2395 Periodic Inspection and Testing Initial and Fundamental Inspection and Testing This qualification helps you to develop the knowledge and practical skills needed to professionally design and install, or inspect and test electrical installations. Undertaking this course enables you to understand the principles, practices and legislation for the initial verification of electrical installations with regulations and requirements. This award is ideal for qualified electricians wishing to update their knowledge of electrical installation techniques. City & Guilds 2394 Level 3 Award in the Initial and Fundamental Inspection and Testing Periodic Inspection and Testing The 2395 covers practical inspection and testing work on a variety of assessment rigs. The course covers the knowledge required to succeed in the examinations and acquire the competence to undertake the periodic inspection and testing of electrical installations. This qualification has been developed for practising electricians who have not carried out inspection and testing since qualifying or who require some upskilling. City & Guilds 2395 Level 3 Award in the Requirements for Periodic Inspection and Testing Tuesday and Thursday 6pm to 9pm 8 weeks plus practical exam Start Date 23rd April Combined Course 750 09 09 10

Renewable Energy Renewable Energy Introduction Alongside our partners, Group Horizon, we are pleased to be able to offer a wide variety of courses covering subjects from Green Deal to Electric Vehicles, and Solar Photovoltaics (PV) to Energy Efficiency. Renewable energy is becoming an increasingly important element of the construction and engineering sectors. Our courses offer existing workers the chance to up-skill and take advantage of the opportunities in this emerging sector as well as providing new career paths. Our state-of-the-art equipment allows us to offer a hands-on experience to fully prepare you for working with these technologies. Our renewable energy courses are fully accredited and industry recognised programmes, meeting the needs of the Microgeneration Certification Scheme (MCS) and Green Deal PAS2030. Electric Vehicle Charging Point Installation This qualification aims to provide expert guidance to those wishing to gain knowledge and understanding of electric vehicle charging equipment installation. Who is this course for? Level 3 qualified electricians who are installing or going to install electric vehicle charging point equipment. City and Guilds 2919 Electric Vehicle Charging Points Installers. Examination is by on-line and practical exam. 2 days 9am to 5pm Pre-course preparation. 18th March, 22nd April, 30th May - 335 + VAT Understanding Sustainable Energy Efficiency This course covers a variety of subjects relevant to rolling out energy efficiency measures across the built environment of the UK. Those who work or want to work in the energy services sector, usually in a support services role such as installation, sales or customer advice. City and Guilds 6068 Understanding Sustainable Energy Efficiency. Assessment is a series of written test papers. Some pre-course study is issued. Background information on energy efficiency on web links to assist in preparation of the course. 3 days 9am to 5pm. Assessment is online via a multiple choice test. 29th April and 28th May - 375 + VAT 11 12

Renewable Energy Renewable Energy Green Deal Domestic Advice Domestic Energy Assessor Award in Environmental Technology (Renewable Energy Foundation Course) Award in Installation of Small Scale Solar Photovoltaic Systems This course will enable you to give consumers advice on all aspects of the Green Deal including how to undertake energy inspections and provide information to customers on financing of the Green Deal. This qualification will enable you to demonstrate the requirements expected by the Department for Energy & Climate Change (DECC) and to apply for membership of a certification scheme. Those wishing to become Green Deal Advisors and are already qualified as Domestic Energy Assessors (DEAs). Those without this initial requirement can also complete this additional qualification as part of a longer learning programme. ABBE Level 3 Diploma Green Deal Domestic Advice This qualification will enable you to conduct and undertake energy assessments and inspections. Additionally, you will be able to explain Energy Performance Certificates relating to domestic property. This qualification is for those who wanting a career as a Domestic Energy Assessor (DEA) and become registered on an accredited scheme. In addition, it allows progression to the ABBE Level 3 Diploma Green Deal Domestic Advice course for those who wanting to become Green Deal Domestic Advisors. ABBE Level 3 Certificate in Domestic Energy Assessment Pre-course preparation This course will give you the foundation knowledge from which you can base your renewable energy career. It will provide you with a breadth of knowledge enabling you to move on to complete qualifications in a range of renewable energy technologies. Plumbers, electricians or practicing domestic installers. However, if you are simply looking for a strong grounding in this industry and its principle technologies, then this course could be ideal. 2399-01 Award in Environmental Technology (Renewable Energy Course) 1 day 9am to 5pm 20th May This course is made up of two units; 2399-11 and 2399-12. 2399-11 focuses on technical expertise in fitting solar PV equipment. 2399-12 focuses on technical maintenance and inspection of solar PV equipment. Those who wish to install and commission solar PV systems. City and Guilds 2399-13. Level 3 Award in the Installation of Small Scale Solar Photovoltaic Systems. 4 days 9am to 5pm 21st May Pre-course preparation Background information and government issued documents to be read with some self assessment study questions to be completed before start date course. 3 days 9am - 5pm 30th April, 21st May and 24th July 3 days 9am to 5pm plus portfolio work 25th March, 16th April and 11th June - 895 + VAT Combined DEA and Green Deal Domestic Advice: 1895 + VAT COMBINED COURSE - 195 + VAT MCS/PAS2030 Seminar - 695 + VAT Understanding the Microgeneration Certification Scheme (MCS) and the PAS 2030 process. MCS isi a mark of quality and demonstrates compliance to industry standards. It highlights to consumers that companies are able to consistently install or manufacture to the highest quality every time. PAS 2030 process is the standard against which installation companies wishing to participate in the Green Deal will be certified. - 1195 + VAT Dates 30th April or 19th June 75 + VAT 13 14

Engineering Engineering Introduction Our engineering and welding programmes are designed to fit your exact professional development requirements whether that be brazing and soldering, or AutoCad. Our courses are accredited to industry recognised standards allowing you to progress your career or take advantage of one of the many skilled job opportunities available within these disciplines. Our welding, cutting and brazing/soldering provision has been developed in partnership with the Weldabilty SIf Foundation to offer successful progression from traineeships through to apprenticeships and to becoming professional welders in industry, recognised by the Welding Institute. Introduction to Welding This programme covers four single-unit qualifications each focusing on a particular process, with an overall qualification in introductory welding skills. People entering the profession or existing welders looking to gain an accredited qualification supported by the Welding Institute. EAL Level 1 Award in Introductory Welding Skills Wednesday 6pm to 9pm for 10 weeks Thursday 6pm to 9pm for 10 weeks 17th April and 9th May 450 Discipline specific welding There are a variety of courses offered. Learners can select from the qualifications below most suited to their career development needs. People looking to gain discipline specific welding skills. EAL Level 1 Award in Introductory Tungsten Inert Gas Welding Skills or EAL Level 1 Award in Introductory Metal Inert Gas Welding Skills or EAL Level 1 Award in Introductory Manual Metal Arc Welding Skills or EAL Level 1 Award in Introductory Oxy - Acetylene Welding Skills or EAL Level 1 Award in Introductory Brazing and Soldering Skills or EAL Level 1 Award in Thermal and Plasma Cutting Skills Wednesday 6pm to 9pm for 10 weeks Thursday 6pm to 9pm for 10 weeks 10th April and 9th May 450 (each course) 15 16

Engineering Engineering Intermediate AutoCad Advanced AutoCad Introduction to SolidWorks 3D Design This course takes students with little or no knowledge of computer aided design, and gives them a good basic knowledge of 2D CAD. The course has wide applications and is largely practical, delivered as a mixture of demonstration, instruction and workshop. This course is highly suited for people who want to use AutoCAD professionally or those who would like to achieve a recognised qualification to further their career development. City & Guilds 7579 Level 2 Award Computer Aided Design and Manufacturing Tuesday and Thursday 6pm to 9pm 9 weeks TBC 600 This course will teach the learner to become familiar with the necessary techniques required to produce and edit drawings of medium complexity and prepare the drawings for output to hard copy. This course is highly suited for people who want to use advanced AutoCAD professionally or those looking to build their existing qualifications in AutoCad for career development. City & Guilds 7579 Level 3 Award Computer Aided Design and Manufacturing Tuesday and Thursday 6pm to 9pm 9 weeks TBC 600 This introductory course provides a foundation in SolidWorks 3D design solutions, tools and techniques using our state-of-the art-facilities. This course is aimed at people wanting to gain an understanding of 3D design. N/A - Introductory programme Monday 6pm to 9pm 6 weeks 29th April 300 17 18

Valeting Valeting Introduction Car Valeting (Intermediate) Car Valeting (Advanced) Car Valeting Smart Repair Through our partner Shine Valeting Centre, an NHC learning company, we are very aware of the needs and requirements of those already working in or looking to set up a business within the world of valeting. Our programmes offer a hands-on learning experience where individuals can train within modern facilities using state-of-the-art equipment. are offered at different levels to suit all needs and backgrounds providing a good grounding for a career in this sector. Shine NHC Valeting Centre This course covers the principles of valeting, including health and safety issues and associated practices relating to the valeting of cars. Those looking to begin a career in valeting or gain a formal qualification in this field. IMIAL Level 1 Certificate in Valeting Principles 1 day per week for 10 weeks Rolling programme (on going start dates) 730 This Level 2 qualification covers technical needs for today s motor vehicle industry with reference to vehicle valeting. It provides essential skills and knowledge for the vehicle valeting industry which will enable you to work on a wide range of vehicles in all types of garages, dealerships and specialist body and paint businesses. Those looking to up skill or enter this industry. IMIAL Level 2 Diploma in vehicle valeting principles 1 day per week for 12 weeks Rolling programme (on going start dates) 1230 This course will help you work on all aspects of a vehicle. You will be able to repair burns and damage to fabric, plastic and leather. The course also covers windscreen and alloy wheel repairs. Those looking to advance and build on skills already learnt or those looking to develop a career in this sector. ABC Level 2 Award in Motor Vehicle Studies (Smart Repair) 2 evenings per week for 31 weeks ( Monday and Wednesday from 6-9pm) or 1 day per week for 31 weeks (Monday 9-5pm) 22nd April 1230 19 20

Health and Safety First Aid Health and Safety First Aid Introduction Health and safety is an ever-increasing part of any business s training and development needs. Our courses offer employers the support required to ensure staff act safely and responsibly at all times and comply to required legislation. We offer quality accredited programmes with business needs in mind, covering topics such as IOSH, NEBOSH and First Aid. NEBOSH General Certificate This programme is designed to enable learners to gain a long-established, leading national award in health and safety management. Those who lack the knowledge and skills required to effectively manage health and safety in the workplace. This certificate is necessary for safety officers and those with positions involving responsibility for health and safety as their main job role. NEBOSH General Certificate 12 Days 1500 IOSH Managing Safely The course consists of eight learning modules; managing safety, reactive monitoring, risk assessment and risk control, health and safety legislation, common hazards, active monitoring, safety management systems, hazards plus assessment. People with some health and safety responsibilities but who are not experts in this field. IOSH Managing Safely 4 days 525 21 22

Health and Safety First Aid Health and Safety First Aid IOSH Directing Safely Health and Safety for Lone Workers HSE First Aid at Work Requalification in First Aid This programme aims to provide directors or owners of companies with an understanding of the moral, legal and business case for proactive health and safety management, and to give guidance on effective risk management. This course is intended for people with strategic responsibility for determining and implementing effective health and safety management within an organisation. IOSH Managing Safely This course enables you, the lone worker, to stay up to date with your clients working practices. Learn how to carry out your own risk assessment, be sure you are covered to work on somebody else s site, find out about permits to work (PPE, security and compliance issues) and keep records to protect you and your employer. Personnel working on remote sites 2-3 hours This course is designed to help delegates to understand basic first aid and acquire knowledge on medical conditions. Delegates will learn how to act safely and promptly when practising first aid at work. Those interested in increasing their understanding of first aid in the work place. HSE First Aid at Work 3 days To keep up to date with changes in process in giving first aid. For individuals already holding a current or expired First Aid at Work qualification. Requalification in First Aid 2 days 185 1 day 265 195 23 24

Bespoke Training, Funding and Group Bookings Payment and Funding Options Bespoke Training This booklet showcases only those programmes which we are currently running to meet demand. North Hertfordshire College works with many organisations to deliver bespoke training to suit the needs of the employer. If you have a training need which is not covered in this booklet then please contact us to discuss. Fully Funded Training Our goal is to support eligible individuals, employers and organisations. We are passionate about making a difference to individuals, their companies and the local community. We are able to offer full-funded programmes for staff aged 19 or over who have less than 5 A-C GCSEs or equivalent to help boost their performance. Group Bookings The prices in this booklet are based on individual learners enrolling. If you have a group of people that you wish you enrol on our programmes, we can tailor our provision to meet your needs. This can include onsite delivery of our programmes anywhere in the UK. Electrical, Engineering, Welding & Valeting Payment can be made; In person at the Stevenage Skills Centre. We accept all major credit (except American Express) and debit cards. Through an invoice raised by North Hertfordshire College for the course(s). Payment to be received either in advance of the start date or on the day of enrolment. The exception is for those learners enrolled on the C&G 2365 Level 2 Electrical Installation programmes lasting 46 weeks where the following payment terms can apply; 30% of fee payable prior to start date. Balance payable in equal instalments over 6 months. Renewable Our renewable provision is in partnership with Group Horizon. An invoice will be issued, which will include VAT. Payment must be made in advance of the programme starting. Health and Safety Our health and safety courses are run through the Goldsmith Centre. Payment terms will be advised at the time of booking a course. 25 26

Apprenticeships Apprenticeships Goldsmith Apprenticeship Academy Apprenticeships are good for business; they not only give a viable and cost-effective recruitment solution, they will also help you: Build a pipeline of talent to support the future growth of your business. Ensure key professional and trade skills are not lost in your company and wider industry. Bring a fresh perspective to the way you work and communicate with customers. North Hertfordshire College s Goldsmith Apprenticeship Academy offers a wide range of Apprenticeships at intermediate, advanced and higher levels including construction, engineering and motor vehicle. Our Apprenticeships have been designed with the help of employers to offer a structured programme of training and development which takes the apprentice through the essential skills which are needed to add value to your business. If you employ less than 1000 employees you may be able to access the Apprenticeship Grant for Employers, a 1500* grant available to employers who recruit a 16 to 24 year old into their business as an apprentice. In addition, if you are an employer in the construction sector you may also be eligible for CITB Training Grants contact us for more details. If you are an employer looking to recruit an apprentice or an individual interested in becoming an apprentice please contact one of our specialist advisers at the Goldsmith Apprenticeship Academy on 0800 6889022. *subject to eligibility please contact us for details 27 28

How to find us - Stevenage Skills Centre How to find us - Goldsmith Centre Where to find us Stevenage Skills Centre, Fulton Close, Stevenage, Hertfordshire, SG1 2AF Where to find us Stevenage 500 ft Fairlands Way - A1155 Goldsmith Centre, Broadway, Letchworth Garden City, Hertfordshire, SG6 3GB Goldsmith Centre LETCHWORTH GARDEN CITY Lytton Way - A602 Argyle Way Fulton Close The Goldsmith Centre is in the centre of Letchworth Garden City, with free onsite parking. Gunnels Wood Rd - A1072 Stevenage Leisure Park Six Hills Way - A1070 29 30