CONTENTS. my HOmE - CATALOGUE

CONTENTS my HOmE CATALOGUE Automation......................... 480 Burglar alarm........................ 500 Temperature control................... 514 Energy management................... 518 Sound system....................... 520 Video door entry and video surveillance system.. 528 Integration and control................. 539 Structured cabling system for the home sector.. 547 Devices and common accessories.......... 551 Flatwall........................... 556 my HOmE - CATALOGUE 479

MY HOME - CATALOGUE AUTOmATIOn Controls H4651M2 L4651M2 AM5831M2 special control H4651M2 special control, 2 modules, flush mounted and lowered, suitable for all standard and special functions. To be completed with 1 or 2-module - one or two function - key covers - AXOLUTE - 4 blue/red bicolour LEDs L4651M2 as above - LIVING, LIGHT and LIGHT TECH - 2 green/red bicolour LEDs AM5831M2 as above - MÀTIX - 2 green/red bicolour LEDs H4652/2 L4652/2 AM5832/2 H4652/3 L4652/3 AM5832/3 controls for single And double loads H4652/2 lowered control which can drive a single actuator for single or double loads or two actuators for single loads or independent double loads - to be completed with 1 2-module key cover for controls with one or two functions or 2 1-module key covers with one or two functions - AXOLUTE L4652/2 as above - LIVING, LIGHT and LIGHT TECH - 2 green/red bicolour LEDs AM5832/2 as above - MÀTIX - 2 green/red bicolour LEDs H4652/3 control which can drive three actuators for single or independent double loads to be completed with 3 1-module key covers for controls with one or two functions - AXOLUTE L4652/3 as above - LIVING, LIGHT, LIGHT TECH AM5832/3 as above - MÀTIX NOTE: the control keys are supplied with the device as standard. upper pushbutton lower pushbutton LED Control key 480 Key cover 1 function 1 module Key cover 2 functions 1 module Key cover 1 function 2 modules Key cover 2 functions 2 modules NOTE: for the selection of the keys cover see the following pages.

Controls soft touch control HD4653M2 HD4653M3 HD4657M3 HC4653/2 HC4653/3 HD4657M4 HS4653/2 HS4653/3 HD4653M2 HC4653/2 HS4653/2 HD4653M3 HC4653/3 HS4653/3 2 module touch control to actuate/set one actuator or one scenario stored in the item F420 scenario module, adjustable LED intensity 3 module touch control to actuate/set one actuator or one scenario stored in the item F420 scenario module, adjustable LED intensity digital glass controls MY HOME control for the control of single or group loads (e.g. lights and rolling shutters), sound system, scenarios, basic audio door entry functions (e.g. gate opening). The configuration can be performed in two separate ways: physical configuration (connecting the physical configurators to their sockets), or virtual configuration (the control can be configured remotely). It s fitted with capacitive soft touch keys that can be identified using adjustable intensity LEDs. my HOmE - CATALOGUE WHITE GLASS HD4657M3 6-key control size 3 modules HD4657M4 8-key control size 4 modules WHICE HC4657M3 HC4657M4 HC4657M3 HC4657M4 6-key control size 3 modules 8-key control size 4 modules NIGHTER HS4657M3 6-key control size 3 modules HS4657M4 8-key control size 4 modules HS4657M3 HS4657M4 NOTE: for WHITE glass controls contact your local BTicino sales representative to check availability. Nighter and Whice control installation Box Support Control 503E H4703 HD4657M3 HC4657M3 HS4657M3 504E H4704 HD4657M4 HC4657M4 HS4657M4 Support Control Box 481

MY HOME - CATALOGUE AUTOmATIOn Controls KnoB control HD4563 HC4563 HS4563 HD4563 HC4563 HS4563 N4563 Knob control for enhanced adjustment of the dimmer (level from 1-99%, soft-start switching ON, etc.). Central pushbutton for switching ON/OFF. AXOLUTE. as above - LIGHT NT4563 as above - LIGHT TECH L4563 as above - LIVING N4563 NT4563 L4563 HD4680 HC4680 HS4680 scenario control HD4680 HC4680 HS4680 N4680 NT4680 L4680 scenario control that can be customised to control 4 independent automation, temperature control or sound system room situations stored in the F420 scenario module - AXOLUTE as above - LIGHT as above - LIGHT TECH as above - LIVING N4680 NT4680 L4680 scenario module F420 device to save 16 scenarios for automation, sound system, temperature control and video door entry applications - 2 DIN modules F420 scenario programmer MH200N device to run scenarios programmed with the TiMH200N software. The scenario can be matched to times, date, manual activations, events managed on AUX channels or generated in the automation, temperature control and burglar alarm systems. The device can operate as a gateway for the use of the MHVisual and Virtual Configurator software programs. Size 6 DIN modules. MH200N 482

Controls HD4607 HC4607 HS4607 N4607 NT4607 L4607 HD4607Z4 HC4607/4 HS4607/4 controls protected with code HD4607 HC4607 HS4607 which allows you to store up to thirty transponders (badges) for activating protected controls - 2 modules - AXOLUTE N4607 as above - LIGHT NT4607 as above - LIGHT TECH L4607 as above - LIVING AM5787 as above - MÀTIX HD4607Z4 HC4607/4 HS4607/4 Scenario control protected with transponder - allows you to store up to thirty transponders (badges) for controlling 4 protected scenarios - 2 modules - AXOLUTE N4607/4 as above - LIGHT NT4607/4 as above - LIGHT TECH L4607/4 as above - LIVING AM5787/4 as above - MÀTIX NOTE: s belonging to the Burglar alarm catalogue with Automation functions, cannot be certified according to standard CEI EN 50428. my HOmE - CATALOGUE N4607/4 NT4607/4 L4607/4 3530S 3540 transponder 3530S portable badge when brought close to the transponder reader it activates it allowing the transfer of the signal generated on the BUS does not require batteries for power can be automatically coded by means of the transponder reader 3540 as above - key-ring Warnign: only transponder readers with production batch 03W18 or higher can read items 3530S (slim badge) and 3540 (key-rings). The older readers only work with item 3530 (badge). NOTE: s belonging to the Burglar alarm catalogue with Automation functions, cannot be certified according to standard CEI EN 50428. 483

MY HOME - CATALOGUE AUTOmATIOn Infrared controls Active infrared receivers HD4654 HC4654 HS4654 HD4654 HC4654 HS4654 N4654N remote control receiver used with a 3529 remote control - up to 16 activations or scenarios stored in item F420 - AXOLUTE as above - LIGHT NT4654N as above - LIGHT TECH L4654N as above - LIVING AM5834 as above - MÀTIX N4654N NT4654N L4654N 3529 HD4610 HC4610 HS4610 HD4610 HC4610 HS4610 N4611 NT4611 L4611 HD4611 HC4611 HS4611 ir remote control 3529 device used to control receivers (up to 16 in the same room) - possibility of selecting up to 16 channels directly - powered by two 1.5 V AAA batteries. passive infrared detectors HD4610 HC4610 HS4610 N4610 NT4610 L4610 HD4611 HC4611 HS4611 N4611 NT4611 L4611 AM5790 AM5791 volumetric presence detector with passive infrared rays alarm signal LED with memory capacity 8 metres, angular opening 105, 14 beams divided on three levels auxiliary prealarm channel can be activated - AXOLUTE as above - LIGHT as above - LIGHT TECH as above - LIVING volumetric presence detector with passive infrared rays alarm signal LED with memory capacity 8 metres, angular opening can be divided from 105 to 0 swivel lens on 2 axes, 14 beams divided on three levels auxiliary prealarm channel can be activated- AXOLUTE as above - LIGHT as above - LIGHT TECH as above - LIVING volumetric presence detector with passive infrared rays with adjustment load range(3-9 metres) - alarm signal LED with memory - angular opening 105, 14 beams divided on three levels - auxiliary prealarm channel can be activated volumetric presence detector with passive infrared rays - alarm signal LED with memory - angular opening can be divided from 105 to 0, lens adjustable on 2 axes, 14 beams divided on three levels - auxiliary prealarm channel can be activated NOTE: s belonging to the Burglar alarm catalogue with Automation functions, cannot be certified according to standard CEI EN 50428 AM5790 AM5791 ir passive mini-detectors 484 N4640 N4640 volumetric presence detector with passive infrared rays alarm signal LED with memory capacity 8 metres, angular opening 105, 14 beams divided on three levels auxiliary prealarm channel can be activated - wall mounted, inclined and at an angle NOTE: s belonging to the Burglar alarm catalogue with Automation functions, cannot be certified according to standard CEI EN 50428

Probes BMSE1001 BMSE2001 BMSE2002 BMSE2003 lighting/movement sensors BMSE1001 Passive infrared BUS sensor, for the detection of movement and light intensity, ceiling mounted installation, protection index IP20, screw connection, 6 m (28 m 2 ) diameter coverage when installed at a 2.5 m height, maximum installation height 4 m, 27 Vdc power supply from BUS, absorption 10 ma, virtual or physical configuration adjustment. BMSE2001 Passive infrared BUS sensor, for the detection of movement and light intensity, wall or ceiling mounted installation, protection index IP42, clamp and RJ45 connection, coverage 2 m wide by 30,12 m (24 m 2 ) field depth when installed at a 2.5 m height, maximum installation height 6 m, 27 Vdc power supply from BUS, absorption 12 ma, adjustment using one-two-way remote control (BMSO4003 and BMSO4001), physical or virtual configuration. BMSE2002 Passive infrared BUS sensor, for the detection of movement and light intensity, wall or ceiling mounted installation, protection index IP42, clamp and RJ45 connection, coverage 11 m wide by 90,14 m (120 m 2 ) field depth when installed at a 2.5 m height, maximum installation height 6 m, 27 Vdc power supply from BUS, absorption 12 ma, adjustment using one-two-way remote control (BMSO4003 and BMSO4001), physical or virtual configuration. BMSE2003 Passive infrared BUS sensor, for the detection of movement and light intensity, wall or ceiling mounted installation, protection index IP42, clamp and RJ45 connection, coverage 2 m wide by 30, 9+9 m (36 m 2 ) field depth when installed at a 2.5 m height, maximum installation height 6 m, 27 Vdc power supply from BUS, absorption 12 ma, adjustment using one-two-way remote control (BMSO4003 and BMSO4001), physical or virtual configuration. BMSE2004 Passive infrared BUS sensor, for the detection of movement and light intensity, wall or ceiling mounted installation, protection index IP42, clamp and RJ45 connection, coverage 10 m wide by 140, 27 m (210 m 2 ) field depth when installed at a 2.5 m height, maximum installation height 6 m, 27 Vdc power supply from BUS, absorption 12 ma, adjustment using one-two-way remote control (BMSO4003 and BMSO4001), physical or virtual configuration. BMSE2005 Passive and infrared double technology BUS sensor, for the detection of movement and light intensity, wall or mounted ceiling installation, protection index IP42, clamp and RJ45 connection, coverage 14 m wide by 180, 7 m (77 m 2 ) field depth when installed at a 2.5 m height, maximum installation height 6 m, 27 Vdc power supply from BUS, absorption 12 ma, adjustment using one-two-way remote control(bmso4003 and BMSO4001), physical or virtual configuration. NOTE: for more information on remote controls BMSO4003 and BMSO4001 refer to the Lighting Management Catalogue. my HOmE - CATALOGUE BMSE2004 BMSE2005 485

MY HOME - CATALOGUE AUTOmATIOn Actuators/Dimmer H4671/1 H4671/2 H4678 L4671/1 L4671/2 L4678 AM5851/1 AM5851/2 flush mounted ActuAtors And dimmer H4671/1 actuator with 1 relay with control key for single loads; 6A resistive or incandescence lamps, 2 A cosϕ 0.5 for ferromagnetic transformers and 150 W fluorescent lamps to be completed with 2-module key covers for single or double function - AXOLUTE L4671/1 as above - LIVING, LIGHT, LIGHT TECH AM5851/1 as above - MÀTIX H4671/2 actuator with 2 interlocked relays with control key for double 500 W loads for reducer motors to be completed with 2-module key covers for double function L4671/2 as above - LIVING, LIGHT, LIGHT TECH AM5851/2 as above - MÀTIX H4678 dimmer actuator for incandescence lamps and ferromagnetic transformers - 60 to 300 VA 230 Vac - to be completed with 2-module key covers for single or double function - AXOLUTE L4678 as above LIVING, LIGHT, LIGHT TECH 3475 3476 BAsic module ActuAtors 3475 actuator with 1 relay for single loads; 2A resistive or incandescence lamps and 2A cosϕ 0.5 for ferromagnetic transformers suitable for installation in ceiling light cups or in Flush mounted boxes behind control devices 3476 actuator with 1 relay for single loads; 2A resistive or incandescence lamps, 2A cosϕ 0.5 for ferromagnetic transformers accepts a traditional pushbutton with NO contact in input NOTE: the control keys are supplied with the device as standard. upper pushbutton lower pushbutton LED Control key 486 Key cover 1 function 2 modules Key cover 2 functions 2 modules

Actuators/Dimmer F411/1N F411/2 F411/4 F411/1NC F411/2NC BMSW1001 BMSW1003 BMSW1002 ActuAtors for centralisations F411/1N actuator with 1 two-way relay - for single loads: 16A resistive, 10A for incandescent lamps, 4A cosϕ 0.5 for ferromagnetic transformers and 4A for fluorescent lamps F411/2 actuator with 2 independent relays - for single and double loads: 10A resistive and 6A incandescent lamps, 500W for motor reducers, 2A cosϕ 0.5 for ferromagnetic transformers and 250W for fluorescent lamps - logical relay interlock via configuration F411/4 actuator with 4 independent relays - for single, double or combined loads: 6A resistive, 2A incandescent lamps, 500W for motor reducers, 2A cosϕ 0.5 for ferromagnetic transformers and 70W for fluorescent lamps - logical relay interlock via configuration F411/1NC actuator with 1 NC 2-way relay for single loads, 16 A for resistive loads, 10 A for incandescent lamps, and 4 A for fluorescent lamps. When the device is switched on, the contact is always closed (ON status), and it opens when an OFF command is sent. In this way, if there is no power input from the BUS, the device will remain in the ON status, keeping the load ON F411/2NC actuator with 2 NC independent relays for single loads, 6 A for resistive loads and incandescent lamps, and 0.65 A for fluorescent lamps. When the device is switched on, the contact is always closed (ON status), and it opens when an OFF command is sent. In this way, if there is no power input from the BUS, the device will remain in the ON status, keeping the load ON. BMSW1001 ON/OFF actuator, 1 output with maximum load 16 A at 230 Vac, clamp and RJ45 connection, protection index IP20, 4 DIN modules, power supply 100/240 Vac @ 50/60 Hz, direct load control pushbutton - zero-crossing function. BMSW1002 ON/OFF actuator, 2 outputs with maximum load 16 A at 230 Vac, clamp and RJ45 connection, protection index IP20, 4 DIN modules, power supply 100/240 Vac @ 50/60 Hz, direct load control pushbuttons - zero-crossing function BMSW1003 ON/OFF actuator, 4 outputs with maximum load 16 A at 230 Vac, clamp and RJ45 connection, protection index IP20, 6 DIN modules, power supply 100/240 Vac @ 50/60 Hz, direct load control pushbuttons - zero-crossing function my HOmE - CATALOGUE dimmer F413N dimmer with 1 output for the powering of fluorescent lamps or LED sources with 1 to 10 V input for single loads of up to 2.5 A at 230 Vac - screw type connection - power supply 27 Vdc - absorption 30 ma - up to 10 ballasts maximum can be connected (clamps 1-2) - with direct load control pushbutton 2-module DIN rail mounted version 1/10V dimmer, 1 output with maximum load 4.3 A at 230 Vac, clamp and RJ45 connection, protection index IP20, 6 DIN modules, power supply 100/240 Vac @ 50/60 Hz, direct load control pushbutton 1 output dimmer for the powering of incandescent and halogen lamps with ferromagnetic transformer - power supply 27 Vdc - absorption 90 ma - with direct load control pushbutton DIN rail mounted version 4 modules 1 output dimmer for the powering of halogen lamps with electronic transformers power supply 27 Vdc - absorption 22 ma - with direct load control pushbutton DIN rail mounted version 4 modules F413N BMDI1001 BMDI1001 F414 F415 F414 F415 487

MY HOME - CATALOGUE AUTOmATIOn Actuators/Dimmer F416U1 Bus system - dimmer F416U1 All Load dimmer, 1 output with maximum load 4.3 A at 230 Vac, clamp and RJ45 connection, protection index IP20, 6 DIN modules, power supply 100/240 Vac @ 50/60 Hz, direct load control pushbutton F417U2 All Load dimmer, 2 output with maximum load 1.7 A at 230 Vac, clamp and RJ45 connection, protection index IP20, 6 DIN modules, power supply 100/240 Vac @ 50/60 Hz, direct load control pushbutton F429 DALI dimmer, 8 independent outputs for the connection of up to 16 DALI reactors for each output power supply 230 Vac @ 50/60 Hz; 110 240 Vdc - absorption 5 ma - with direct load control pushbutton DIN rail mounted version - 6 modules F417U2 F429 3477 F428 contact interface 3477 Basic module control interface with 2 independent contacts to control 2 actuators for single-function loads or to control 1 actuator for doublefunction loads (rolling shutters) accepts in input two traditional switches or pushbuttons with NO and NC contact or a traditional twoway switch or interlocked pushbuttons F428 as above - 2 DIN modules memory module F425 module to save the actuator status to reset the light automation system when there is a black-out 2 shallow DIN modules F425 Kit - control AutomAtion MHKIT10N Automatic kit in LIVING, LIGHT and LIGHT TECH series for the automation of 5 shutters or motor-driven curtains 488 MHKIT10N

AXOLUTE key-covers with silk-screen printing - 1 function Key-covers with silk-screen printing with 1 function symbol HD4915AA HD4915M2AA HD4915AB HD4915AC HD4915M2AB HD4915M2AC HD4915AD HD4915BA HD4915M2AD HD4915M2BA HD4915BB HD4915M2BB HD4915BC HD4915M2BC HC4915AA HC4915/2AA HS4915AA HC4915AB HC4915AC HS4915AB HS4915AC HC4915/2AB HC4915/2AC HS4915/2AB HS4915/2AC HC4915AD HC4915BA HS4915AD HS4915BA HC4915/2AD HC4915/2BA HS4915/2AD HS4915/2BA HC4915BB HC4915/2BB HC4915BC HC4915/2BC HS4915/2AA HS4915BB HS4915/2BB HS4915BC HS4915/2BC Symbol description 1 module 2 modules HD4915AA HD4915M2AA OFF HC4915AA HC4915/2AA HS4915AA HS4915/2AA HD4915AB HD4915M2AB ON HC4915AB HC4915/2AB HS4915AB HS4915/2AB HD4915AC HD4915M2AC GEN HC4915AC HC4915/2AC HS4915AC HS4915/2AC HD4915AD HD4915M2AD Dimmer HC4915AD HC4915/2AD HS4915AD HS4915/2AD HD4915BA HD4915M2BA Light HC4915BA HC4915/2BA HS4915BA HS4915/2BA HD4915BB HD4915M2BB Bell HC4915BB HC4915/2BB HS4915BB HS4915/2BB HD4915BC HD4915M2BC Exhaust fan HC4915BC HC4915/2BC HS4915BC HS4915/2BC HD4915BD HD4915M2BD Key HC4915BD HC4915/2BD HS4915BD HS4915/2BD HD4915BE HD4915M2BE Treble clef HC4915BE HC4915/2BE HS4915BE HS4915/2BE HD4915BF HD4915M2BF Nurse HC4915BF HC4915/2BF HS4915BF HS4915/2BF HD4915BG HD4915M2BG Room HC4915BG HC4915/2BG HS4915BG HS4915/2BG HD4915BH HD4915M2BH ALARM HC4915BH HC4915/2BH HS4915BH HS4915/2BH my HOmE - CATALOGUE HD4915BD HD4915M2BD HD4915BE HD4915M2BE HC4915BD HC4915BE HS4915BD HS4915BE HC4915/2BD HC4915/2BE HS4915/2BD HS4915/2BE HD4915BF HD4915M2BF HD4915BG HD4915M2BG HC4915BF HC4915BG HS4915BF HS4915BG HC4915/2BF HC4915/2BG HS4915/2BF HS4915/2BG HD4915BH HD4915M2BH HC4915BH HC4915/2BH HS4915BH HS4915/2BH 489

MY HOME - CATALOGUE AUTOmATIOn AXOLUTE key-covers with silk-screen printing - 2 functions Key-covers with silk-screen printing with 2 function symbol HD4911AF HD4911M2AF HC4911AF HC4911/2AF HS4911AF HS4911/2AF HD4911AG HD4911AH HC4911AG HC4911AH HS4911AG HS4911AH HD4911M2AG HD4911M2AH HC4911/2AG HC4911/2AH HS4911/2AG HS4911/2AH HD4911AI HD4911M2AI HD4911BA HD4911M2BA HC4911AI HC4911/2AI HC4911BA HC4911/2BA HS4911AI HS4911/2AI HS4911BA HS4911/2BA Symbol description 1 module 2 modules HD4911AF HD4911M2AF ON OFF GEN HC4911AF HC4911/2AF HS4911AF HS4911/2AF HD4911AG HD4911M2AG ON OFF HC4911AG HC4911/2AG HS4911AG HS4911/2AG HD4911AH HD4911M2AH UP DOWN HC4911AH HC4911/2AH HS4911AH HS4911/2AH HD4911AI HD4911M2AI ON OFF adjustment HC4911AI HC4911/2AI HS4911AI HS4911/2AI HD4911BA HD4911M2BA Light HC4911BA HC4911/2BA HS4911BA HS4911/2BA HD4911BC HD4911M2BC Exhaust fan HC4911BC HC4911/2BC HS4911BC HS4911/2BC HD4911BE HD4911M2BE Treble clef HC4911BE HC4911/2BE HS4911BE HS4911/2BE HD4911BC HD4911BE HD4911M2BC HD4911M2BE HC4911BC HC4911BE HS4911BC HS4911BE HC4911/2BC HC4911/2BE HS4911/2BC HS4911/2BE 490

AXOLUTE key-covers without silk-screen printing - 1 and 2 functions Key-covers without silk-screen printing 2 functions HD4911 HD4911M2 HC4911 HC4911/2 HS4911 HS4911/2 HD4911 HD4911M2 1 function Key cover without silk-screen printing - 1 mod. HC4911 HS4911 Key cover without silk-screen printing - 2 mod. HC4911/2 HS4911/2 Key-covers without silk-screen printing my HOmE - CATALOGUE HD4915 HC4915 HS4915 HD4915 Key cover without silk-screen printing - 1 mod. HC4915 HS4915 HD4915M2 Key cover without silk-screen printing - 2 mod. HC4915/2 HS4915/2 HD4915M2 HC4915/2 HS4915/2 491

MY HOME - CATALOGUE AUTOmATIOn LIVInG, LIGHT, LIGHT TECH and màtix key-covers with silk-screen printing LIVING LIGHT LIGHT TECH MÀTIX Overview of the silk-screen printing Key-covers with silk-screen printing - 2 function - 1 module LIGHT LIGHT TECH LIVING N4911AFM NT4911AFM L4911AF ON OFF GEN N4911AGM NT4911AGM L4911AG ON OFF N4911AHM NT4911AHM L4911AH UP DOWN Silk-screen printing description N4911AIM NT4911AIM L4911AI ON OFF adjustment N4915BAM NT4915BAM L4911BA light symbol N4915BCM NT4915BCM L4911BC exhaust fan symbol N4915BEM NT4915BEM L4911BE treble clef symbol N4911BFM NT4911BFM L4911BF sound system functions...af...afm...ag...agm...ah...ahm...ai...aim MÀTIX Silk-screen printing description AM5911AF ON OFF GEN AM5911AG ON OFF AM5911AH UP DOWN...BA...BAM...BC...BCM...BE...BEM...BF...BFM AM5911AI AM5911BF ON OFF adjustment sound system functions Key-covers with silk-screen printing - 2 functions - 2 modules LIGHT LIGHT TECH LIVING N4911/2AFM NT4911/2AFM L4911/2AF ON OFF GEN N4911/2AGM NT4911/2AGM L4911/2AG ON OFF N4911/2AHM NT4911/2AHM L4911/2AH UP DOWN Silk-screen printing description N4911/2AIM NT4911/2AIM L4911/2AI ON OFF adjustment N4915/2BAM NT4915/2BAM L4911/2BA light symbol N4915/2BCM NT4915/2BCM L4911/2BC exhaust fan symbol N4915/2BEM NT4915/2BEM L4911/2BE treble clef symbol MÀTIX AM5911/2AF AM5911/2AG AM5911/2AH AM5911/2AI Silk-screen printing description ON OFF GEN ON OFF UP DOWN ON OFF adjustment 492

LIVInG, LIGHT, LIGHT TECH and màtix key-covers with silk-screen printing Living Light LIGHT Tech Overview of the silk-screen printing...aa...aam...ab...abm...ac...acm...ad...adm...ba...bam Key-covers with silk-screen printing - 1 functon - 1 module Silk-screen printing description LIGHT LIGHT TECH LIVING N4915AAM NT4915AAM L4915AA OFF N4915ABM NT4915ABM L4915AB ON N4915ACM NT4915ACM L4915AC GEN N4915ADM NT4915ADM L4915AD dimmer symbol N4915BAM NT4915BAM L4915BA light symbol N4915BBM NT4915BBM L4915BB bell symbol N4915BCM NT4915BCM L4915BC exhaust fan symbol N4915BDM NT4915BDM L4915BD key symbol N4915BEM NT4915BEM L4915BE treble clef symbol N4915BFM NT4915BFM L4915BF nurse symbol N4915BGM NT4915BGM L4915BG room service symbol N4915BHM NT4915BHM L4915BH ALARM my HOmE - CATALOGUE...BB...BBM...BG...BGM 4911TDM...BC...BCM...BD...BDM...BE...BEM...BF...BFM...BH...BHM Key-covers with silk-screen printing - 1 function - 2 modules Silk-screen printing description LIGHT LIGHT TECH LIVING N4915/2AAM NT4915/2AAM L4915/2AA OFF N4915/2ABM NT4915/2ABM L4915/2AB ON N4915/2ACM NT4915/2ACM L4915/2AC GEN N4915/2ADM NT4915/2ADM L4915/2AD dimmer symbol N4915/2BAM NT4915/2BAM L4915/2BA light symbol N4915/2BBM NT4915/2BBM L4915/2BB bell symbol N4915/2BCM NT4915/2BCM L4915/2BC exhaust fan symbol N4915/2BDM NT4915/2BDM L4915/2BD key symbol N4915/2BEM NT4915/2BEM L4915/2BE treble clef symbol N4915/2BFM NT4915/2BFM L4915/2BF nurse symbol N4915/2BGM NT4915/2BGM L4915/2BG room service symbol N4915/2BH M NT4915/2BH M L4915/2BH ALARM home AutomAtion hinge 4911TDM new 3-module LIVING-LIGHT support NOTE ON USE OF HINGE ITEM 4911TDM hinge item 4911TDM control control key 2 modules control key 1 module key cover 1 module key cover 2 modules 493

MY HOME - CATALOGUE AUTOmATIOn LIVInG, LIGHT, LIGHT TECH and màtix key-covers with silk-screen printing Overview of the silk-screen printing...aa...ab...ac...ad...ba...bb Key-covers with silk-screen printing - 1 function - 1 module MÀTIX AM5915AA AM5915AB AM5915AC AM5915AD AM5915BA AM5915BB AM5915BC AM5915BD AM5915BE AM5915BF AM5915BH Silk-screen printing description OFF ON GEN dimmer symbol light symbol bell symbol exhaust fan symbol key symbol treble clef symbol nurse symbol ALARM...BC...BD...BE Key-covers with silk-screen printing - 1 function - 2 modules Silk-screen printing description MÀTIX AM5915/2AA OFF AM5915/2AB ON...BF...BH AM5915/2AC GEN AM5915/2AD dimmer symbol AM5915/2BA light symbol AM5915/2BB bell symbol AM5915/2BC exhaust fan symbol AM5915/2BD key symbol AM5915/2BE treble clef symbol AM5915/2BF nurse symbol AM5915/2BH ALARM 494

LIVInG, LIGHT, LIGHT TECH and màtix key-covers without silk-screen printing Key-covers without silk-screen printing - 2 functions - 1 module LIGHT LIGHT TECH LIVING KRISTALL MÀTIX N4915M NT4915M L4911 N4932 AM5911 N4915M N4915/2M NT4915M L4911 NT4915/2M N4932 AM5911 L4911/2 Key-covers without silk-screen printing - 2 functions - 2 modules LIGHT LIGHT TECH LIVING KRISTALL MÀTIX N4915M/2M NT4915M/2M L4911/2 N4932/2 AM5911/2 my HOmE - CATALOGUE N4932/2 AM5911/2 N4915 NT4915 L4915 N4932 Key-covers without silk-screen printing - 1 function - 1 module LIGHT LIGHT TECH LIVING KRISTALL MÀTIX N4915M NT4915M L4915 N4932 AM5911 Key-covers without silk-screen printing - 1 function - 2 modules LIGHT LIGHT TECH LIVING KRISTALL MÀTIX N4915M/2M NT4915M/2M L4915/2 N4932/2 AM5911/2 N4915/2M NT4915/2M L4915/2 N4932/2 personalised labels for KristAll Key covers N4932C L4932C personalised label for Kristall transparent key-covers - item N4932-1 module N4932C L4932C N4932C/2 L4932C/2 N4932C/2 L4932C/2 personalised label for Kristall transparent key-covers - item N4932/2-2 modules 495

MY HOME - CATALOGUE AUTOmATIOn radio devices HA4572 radio control devices with BAttery HA4572 HB4572 L4572 H4572PI L4572PI flat radio control to be completed with 1-module AXOLUTE key cover item HC/HS4919 and 2-module rectangular cover plate powered by a 3V CR2032 lithium battery (supplied) - surface mounted installation with double-sided adhesive tape or screws and screw anchors as above to be completed with elliptic cover plate flat radio control to be completed with 1-module LIVING, LIGHT or LIGHT TECH key cover item L/N/NT4919 and 2-module standard cover plate powered by a 3V CR2032 lithium battery (supplied) - surface mounted installation with double-sided adhesive tape or screws and screw anchors Flush mounted radio control to be completed with 1 module AXOLUTE key cover item HC/HS4919 powered by a 3V CR2032 lithium battery (supplied) 2 modules as above - to be completed with 1-module key covers LIVING, LIGHT or LIGHT TECH item L/N/NT4919 HB4572 L4572 H4572PI Key-covers for radio controls with BAttery HD4919* HC4919* HS4919* N4919 NT4919 L4919 Key-covers for radio controls item HA4572, HB4572, H4572PI, L4572, L4572PI as above - LIGHT as above - LIGHT as above - LIVING * For the availability, contact the BTicino sales staff HD4919 HC4919 HS4919 L4919 N4919 NT4919 496

radio devices HA4572SB radio control devices without BAttery HA4572SB flat radio control to be completed with 1-module AXOLUTE key cover item HC/HS4919SB and 2-module rectangular cover plate no batteries required - surface mounted installation with double-sided adhesive tape or screws and screw anchors used in MY HOME applications with special interface item HC/HS4575SB HB4572SB as above to be completed with elliptic cover plate L4572SB flat radio control to be completed with 1-module LIVING, LIGHT or LIGHT TECH key cover item L/N/NT4919SB and 2-module standard cover plate no batteries required - surface mounted installation with doublesided adhesive tape or screws and screw anchors used in MY HOME applications with special interface item L/N/NT4575SB my HOmE - CATALOGUE HB4572SB HB4572SB Key-covers for radio controls without BAttery HD4919SB* HC4919SB* HS4919SB* key-covers for radio controls item HA4572SB, HB4572SB, L4572SB HD4919SB HC4919SB HS4919SB N4919SB as above - LIGHT NT4919SB as above - LIGHT L4919SB as above - LIVING * For the availability, contact the BTicino sales staff N4919SB NT4919SB L4919SB radio remote control 3527 radio remote control with 6 customisable pushbuttons with graphic labels - ergonomic grip and set up for used by disabled people (designed in collaboration with the INAIL Prosthesis Center) powered by 2 non-rechargeable 1.5 V AA alkaline batteries (supplied) 3528 radio remote control with 4 pushbuttons - power supply with 3 V battery type CR2032 (supplied) 3527 3528 497

MY HOME - CATALOGUE AUTOmATIOn radio devices H4574 L4574 H4573/2 L4573/2 flush mounted radio ActuAtors H4574 radio actuator with two-way switch power: 230 Vac with control key with one exchange relay for single loads: from 0.2 to 2A resistive and for incandescent lamps, 0.2 to 2 A cosϕ 0.5 for ferromagnetic transformers and from 0.05 to 0.3A for fluorescent lamps and electronic transformers 2 flush mounted modules - to be completed with 2-module key cover for single or double function AXOLUTE series L4574 as above LIVING, LIGHT, LIGHT TECH H4573/2 rolling shutter radio actuator power: 230 Vac with control key and two interlocked relays for double loads 500 W for motor reducers can also be used with one relay for single loads: 2A resistive and for incandescent lamps, 2A cosϕ 0.5 for ferromagnetic transformers 2 flush mounted modules - to be completed with 2-module key covers for single or double function - AXOLUTE L4573/2 as above LIVING, LIGHT, LIGHT TECH 3470 basic radio actuator power: 230 Va.c with one relay for single loads: 2A resistive and for incandescent lamps, 2A cosϕ 0.5 for ferromagnetic transformers suitable for installation in ceiling light cups or in flush mounted boxes 3470 din module radio ActuAtors F470/1 radio actuator with 1 relay - power: 230 Vac for single loads: 10A resistive, 6A for incandescent lamps, 2A cosϕ 0.5 for ferromagnetic transformers and 2A for fluorescent lamps and electronic transformers 2 DIN modules F470/2 actuator with 2 relays - power: 230 Vac for single and double loads: 6A resistive, 2A for incandescent lamps, 2A cosϕ 0.5 for ferromagnetic transformers, 0.3A for fluorescent lamps and electronic transformers 500 W for motor reducers 2 DIN modules F470/1 F470/2 radio light point set MHKIT30N kit including one radio control, an actuator with two-way switch and 3 key-covers for LIVING, LIGHT and LIGHT TECH series 498

radio devices front view 3526 mobile radio ActuAtors 3526 wander actuator with German standard socket and universal plug (German standard, 10 A, 16 A) - power supply: 230 Vac- with one relay for single loads: 16A resistive, 10A for incandescent lamps, 4A cosϕ 0.5 for ferromagnetic transformers and 4A for fluorescent lamps and electronic transformers 3526/10 mobile actuator with 10 A plug and German standard plug/10 A - power supply: 230 Vac- with one relay for single loads: 10A resistive and for incandescent lamps, 4A cosϕ 0.5 for ferromagnetic transformers and 4A for fluorescent lamps and electronic transformers 3526/16 mobile actuator with 16 A plug and universal plug (German standard, 10 A, 16 A) - power supply: 230 Vac- with one relay for single loads: 16 A resistive, 10 A for incandescent lamps, 4 A cosϕ 0.5 for ferromagnetic transformers and 4 A for fluorescent lamps and electronic transformers my HOmE - CATALOGUE 3526/10 3526/16 HD4575 HD4575SB HD4576 HC4575 HC4575SB HC4576 HS4575 HS4575SB HS4576 radio receiving interfaces HD4575 HC4575 HS4575 N4575N NT4575N L4575N radio receiving interface - power supply 27 Vdc from the BUS - 2 modules AXOLUTE as above - LIGHT as above - LIGHT TECH as above - LIVING HD4575SB HC4575SB HS4575SB radio receiving interface for flat radio control item HA/HB4572SB power supply 27 Vdc from the BUS 2 modules - AXOLUTE light finish N4575N N4575SB N4576N NT4575N NT4575SB NT4576N L4575N L4575SB L4576N N4575SB NT4575SB L4575SB radio receiving interface for flat radio control item L4572SB - power supply 27 Vdc from the BUS - 2 modules - LIVING, LIGHT, LIGHT TECH radio transmitting interfaces HD4576 HC4576 HS4576 N4576N radio transmitting interface - power supply 27V d.c. from the BUS - 2 modules AXOLUTE light finish as above - LIGHT NT4576N as above - LIGHT TECH L4576N as above - LIVING 499

MY HOME - CATALOGUE BUrGLAr ALArm Certification of the devices IN ORDER TO MAKE THIS CATALOGUE AS COMPLETE AS POSSIBLE, HERE IS A LIST OF IMQ LEVEL 2 APPROVED DEVICES, IN ACCORDANCE WITH CEI 79-2 STANDARD. central units 3485 Polyx PSTN central unit 3486 PSTN/GSM central unit Accessories 3530S trasponder 3540 trasponder L4630 tamper 3484 GSM antenna tamper detectors L/N/NT/HC/HD/ HS4610 L/N/NT/HC/HD/ HS4611 L/N/NT/HC/HD/ HS4612 F482 IR detector IR detector contact interface contact interface control devices L/N/NT/HC/HD/ HS4607 L/N/NT/HC/HD/ HS4607/4 L/N/NT/HC/HD/ HS4606 L/N/NT/HC/HD/ HS4608 trasponder reader transponder zones activator keypad display keypad sirens 4070 indoor siren N/NT/HC/HD/ HS4070 4072A/L indoor siren outdoor siren power supplies E47ADCN power supply E46ADCN power supply 500

management and control devices 3485 3486 central unit with communicator 3485 POLYX ALARM central unit with system self-learning function and display of the configuration on the screen. Controlled using the transponder and the keypad. Managing up to 72 sensors and 8 zones. Possibility to set up to 16 scenarios. Fitted with PSTN telephone communicator for forwarding of alarms. Programmed using the TiSecurity POLYX application. Wall mounted using the metal bracket supplied as standard. Battery powered, using battery item 3506, supplied as standard. 3486 central unit with system self-learning function and display of the configuration on the screen. Controlled using the IR remote control, the transponder and the keypad. Managing up to 72 sensors and 8 zones. Possibility to set up to 16 scenarios. Fitted with integrated PSTN and GSM telephone communicator, for forwarding of alarms. Programmed using the TiSecurity application. Wall mounted using the metal bracket supplied as standard, or flush mounted in MULTIBOX units. Battery powered, using battery item 3507/6. 3483 coaxial extension cable for the central unit aerial item 3486 - L = 3.5 metres 3484 GSM antenna protection tamper use to ensure level 2 of CEI 79-2 standard. my HOmE - CATALOGUE 3485B L4601 N4601 NT4601 central unit 3485B HC4601 HD4601 HS4601 N4601 NT4601 L4601 central unit with system self-learning function and display of the configuration on the screen. Controlled using the transponder and the keypad. Managing up to 36 sensors and 4 zones. Possibility to set up to 4 scenarios. Fitted with alarm notification actuator, and clamp for the connection of NC contacts for the protection of doors and windows. Wall mounted using the metal bracket supplied as standard, or flush mounted, inside item 506E boxes. Battery powered, using battery item 3506, supplied as standard - wall mounted installation as above - AXOLUTE - flush mounted installation - battery powered, using battery item L4380/B supplied as standard as above - LIGHT as above - LIGHT TECH as above - LIVING HD4601 HC4601 HS4601 501

MY HOME - CATALOGUE BUrGLAr ALArm management and control devices Zone ActivAtor 1-4 HD4607Z4 HC4607/4 HS4607/4 HD4607Z4 HC4607/4 HS4607/4 receiver for the arming and disarming of the system using the badge transponder, item 3530S and item 3540 - pushbuttons to control 4 zones - signals the state of the zones and the system by LEDs - can disable the light and sound signals - 2 modules - AXOLUTE. N4607/4 as above - LIGHT NT4607/4 as above - LIGHT TECH L4607/4 as above - LIVING AM5787/4 as above - MÀTIX N4607/4 NT4607/4 L4607/4 AM5787/4 expander Zones 5-8 HD4603Z8 HC4603/8 HS4603/8 HD4603Z8 HC4603/8 HS4603/8 Module to extend the zones which can be divided pushbuttons to control zones 5 8 LEDs signal the status of the zones can disable the light signals - It can be coupled to the 1-4 zones divider, for extending the system to up to 8 zones - 2 modules - AXOLUTE N4603/8 as above - LIGHT NT4603/8 as above - LIGHT TECH L4603/8 as above - LIVING AM5783/8 as above - MÀTIX N4603/8 NT4603/8 L4603/8 AM5783/8 502

management and control devices display KeypAd connector HD4608 N4608 HC4608 NT4608 HS4608 L4608 HD4608 HC4608 HS4608 N4608 NT4608 L4608 Device fitted with display for arming or disarming the system using a numeric key, set and saved on the burglar alarm central unit, item 3485/B, item 3486 and HC/HS4601, or with transponder badge. If used with the flush mounted central unit, item L/N/NT4600/4, the code or the transponder badge used are those saved in the central unit during the programming of the keypad and badge connection devices. It can be used to display all information, as well as to manage some functions of the central unit (division, etc.). Installed inside a flush mounted box item 506E with front cover plate. Battery powered, using battery item L4380/B supplied as standard - 2 modules - AXOLUTE. as above - LIGHT as above - LIGHT TECH as above - LIVING my HOmE - CATALOGUE KeypAd connector HD4606 HC4606 HS4606 HD4606 HC4606 HS4606 Device for arming or disarming the system using a numeric key, set and saved on the burglar alarm central unit item 3485/B, item 3486 and item L/N/NT/HD4601/HC/HS4601. If used with the flush mounted central unit, item L/N/NT4600/4, the code used is the one saved on the central unit during the programming procedure - 2 modules - AXOLUTE. N4606 as above - LIGHT NT4606 as above - LIGHT TECH L4606 as above - LIVING AM5786 as above - MÀTIX N4606 NT4606 L4606 AM5786 503

MY HOME - CATALOGUE BUrGLAr ALArm management and control devices HD4607 HC4607 HS4607 N4607 NT4607 L4607 transponder ActivAtor HD4607 HC4607 HS4607 N4607 NT4607 L4607 AM5787 for arming and disarming the system using the transponder (badge) saved in the display central unit. If used with the flush mounted central unit, item L/N/NT4600/4, the transponder used is the one saved on the central unit during the programming procedure LED system status signalling auxiliary channel available for actuations - 2 modules - AXOLUTE as above - LIGHT as above - LIGHT TECH as above - LIVING as above - MÀTIX AM5787 3530S 3540 transponder 3530S thin portable badge 3540 key-ring portable badge remote control 348220 dual pushbutton radio remote control for arming or disarming the system, with built-in transponder. Maximum distance 50 m without obstructions. Powered by a 3 V CR2032 type battery. To be used with radio receiver, item HD/HC/HS4618 and item L/N/NT4618 348220 504

Control devices, guarantee and kits KeylocK disconnector HD4605 HC4605 HS4605 Module to switch the system off and block it by means of a mechanical key - signals the system status by LEDs fitted with keyhole cover key with 10,000 combinations - 2 modules - AXOLUTE HD4605 N4605 HC4605 NT4605 HS4605 L4605 N4605 NT4605 L4605 AM5785 as above - LIGHT as above - LIGHT TECH as above - LIVING as above - MÀTIX my HOmE - CATALOGUE AM5785 3549 extended 4 plus guarantee 3549 BTicino 4 PLUS Guarantee package extended program guarantee which offers the installer the following advantages: free start up by the BTicino Technical After-Sales Service Centre - after-sales assistance supplied by BTicino Technical After-Sales Service Centres - operations under guarantee free in the first 2 years and with fixed contribution for the next 2 years - extension of 4 years guarantee on the burglar alarm system - operations not under guarantee with fixed contribution at advantageous conditions - activation of the My Home Web service (at the customer request). BurglAr AlArm Kit MHKIT85N expandable burglar alarm kit consisting of: - 1 central unit - item 3485B; - 2 IR detectors - item N4640; - 1 power supply - item E46ADCN; - 1 outdoor siren - item 4072L; - 1 magnetic contact item 3511; - various configurators. MHKIT85N 505

MY HOME - CATALOGUE BUrGLAr ALArm Volumetric detectors passive infrared detectors HD4610 HC4610 HS4610 HD4610 HC4610 HS4610 N4610 volumetric presence detector with passive infrared rays with adjustable sensitivity level (3 to 9 metres) - alarm signal LED with memory - angular opening 105, 14 bands divided over 3 levels auxiliary prealarm channel can be activated - 2 modules - AXOLUTE. as above - LIGHT NT4610 as above - LIGHT TECH L4610 as above - LIVING AM5790 as above - MÀTIX L4610 N4610 NT4610 AM5790 HD4611 HC4611 HS4611 HD4611 HC4611 HS4611 N4611 NT4611 L4611 AM5791 volumetric presence detector as above angular opening can be divided from 105 to 0 swivel lens on 2 axes - AXOLUTE - 2 modules as above - LIGHT as above - LIGHT TECH as above - LIVING as above - MÀTIX N4611 N4611B NT4611 NT4611B L4611 L4611B AM5791 AM5791B N4611B volumetric presence detector with passive infrared rays with fixed sensitivity level (6 metres) - alarm signal LED with memory - angular opening 105, 14 bands divided over 3 levels burglar alarm functions only - LIGHT. NT4611B as above - LIGHT TECH L4611B as above - LIVING AM5791B as above - MÀTIX ir passive mini-detectors N4640 N4640B N4640 volumetric presence detector with passive infrared rays with adjustable sensitivity (3 to 9 metres) - alarm signal LED with memory - angular opening 105, 14 bands divided over 3 levels - 3 level sensitivity adjustment using the configuration procedure - auxiliary prealarm channel can be activated - wall mounted, inclined and at an angle N4640B detector as above - preset sensitivity level (6 metres) - burglar alarm functions only double technology detectors HD4613 HC4613 HS4613 HD4613 HC4613 HS4613 N4613 dual-technology volumetric presence detector made up of two sensors: one infrared to detect hot bodies (IR) and one with microwaves to detect movement (MW). The alarm is only triggered when both detection technologies activate - 2 modules - AXOLUTE as above - LIGHT NT4613 as above - LIGHT TECH L4613 as above - LIVING 506 N4613 NT4613 L4613

Contact interface and perimeter protection devices contact interface module HD4612 HD4612V12 N4612 N4612/12 HC4612 HC4612/12 NT4612 NT4612/12 HS4612 HS4612/12 L4612 L4612/12 HD4612 HC4612 HS4612 N4612 NT4612 L4612 AM5792 NC electromagnetic contact interface module possibility of connecting the balanced and unbalanced contact protection line alarm indication LED with operation memory - auxiliary prealarm channel can be activated - 2 modules - AXOLUTE. as above - LIGHT as above - LIGHT TECH as above - LIVING as above - MÀTIX As above - to manage 2 independent NC electromagnetic contact lines No. of modules 3480 base F482 2 DIN NOTE: The device item 3480 is also preset for the management of the technical alarms function in general. my HOmE - CATALOGUE AM5792 3480 F482 HD4612V12 Interface module for the rolling shutter protection cable detector can HC4612/12 HS4612/12 be applied to NC/NO and window-breaking detectors (item 3516) - 2 modules - AXOLUTE N4612/12 as above - LIGHT NT4612/12 as above - LIGHT TECH L4612/12 as above - LIVING 3510 3513 3511 3510M 3510PB 3512 magnetic contacts 3510 NC electromagnetic contact interface detectors and protection line version for flush mounted. 3510M detector as above brass, high mechanical resistance - used for nonferromagnetic window and door frames with a low section profile. 3510PB detector as above brass, high mechanical resistance - used for all types of window and door frames and armored doors. 3511 detector as above version for visible mounting 3512 detector as above die-cast aluminum for swing door or sliding door installations. For floor installations. 3513 detector as above version for visible mounting for metal surfaces. rolling shutters detector 3514 detector to protect rolling shutters or similar winding shutters. 3514 3516 glass-breaking detector 3516 piezoelectric window-breaking detector. Installation by means of double-sided adhesive tape supplied. Protection of windows with 3 metre maximum diagonal opening 507

MY HOME - CATALOGUE BUrGLAr ALArm Ir barriers, signalling and technical alarm devices ir BArriers Active infrared barriers, to protect windows and doors. The device is made up of 2 columns, one acts as TRANSMITTER (TX), the other as RECEIVER (RX). When several IR beams are broken the alarm is immediately triggered. 3518-3519 3518/150 3518/50 Bands 3518 barrier for windows - 4 1 metre 3519 barrier for doors - 8 2 metres 3518/50 barrier for window - 2 0.5 metres 3518/150 barrier for window - 1.5 metres 6 relay ActuAtor module HD4614 HC4614 HS4614 HD4614 HC4614 HS4614 N4614 actuator module with multiple configuration with output via relay C-NO-NC contacts, 24 V 0.4A cosϕ 0.4 to be used to repeat the alarm, activate an external device, repeat the system status and signal that the battery is flat - 2 modules - AXOLUTE. as above - LIGHT NT4614 as above - LIGHT TECH L4614 as above - LIVING AM5794 as above - MÀTIX N4614 NT4614 L4614 AM5794 AuX channel interface HD4615 HC4615 HS4615 HD4615 HC4615 HS4615 N4615 interface module for NO or NC auxiliary contacts input availability 5 12 Vac/dc optoinsulated to be used for various functions including request for assistance for old people, anti-panic and similar technical alarms - 2 modules - AXOLUTE as above - LIGHT NT4615 as above - LIGHT TECH L4615 as above - LIVING AM5795 as above - MÀTIX N4615 NT4615 L4615 508 AM5795

Technical alarm devices HD4511V12 HC4511/12 HS4511/12 N4511/12 NT4511/12 L4511/12 AM5731/12 natural gas detectors HD4511V12 HC4511/12 HS4511/12 NATURAL GAS detector with visual and sound (85dB) alarm signalling - internal self-diagnosis - ready for accepting and controlling signal repeaters - powered using a 12 V ac/dc transformer item HD/HC/ HS/L/N/NT4541 or item F91/12E - 2 modules - AXOLUTE N4511/12 as above - LIGHT NT4511/12 as above - LIGHT TECH L4511/12 as above - LIVING AM5731/12 as above - MÀTIX my HOmE - CATALOGUE gpl gas detectors HD4512V12 HC4512/12 HS4512/12 HD4512V12 HC4512/12 HS4512/12 LPG GAS detector with visual and sound (85dB) alarm signalling - internal self-diagnosis - capable of operating with signal repeaters - powered using a 12 V ac/dc transformer item HD/HC/HS/L/N/NT4541 or item F91/12E - 2 modules - AXOLUTE N4512/12 as above - LIGHT NT4512/12 as above - LIGHT TECH L4512/12 as above - LIVING AM5732/12 as above - MÀTIX N4512/12 NT4512/12 L4512/12 AM5732/12 509

MY HOME - CATALOGUE BUrGLAr ALArm Devices for radio expansion radio receiver for mixed wire-radio system HD4618 HC4618 HS4618 HD4618 HC4618 HS4618 N4618 Radio receiver module to be used as interface between the wire burglar alarm and the radio sensors to make combined wire-radio systems - can also be used for remote assistance functions together with remote control item 3448 and radio detectors. as above - LIGHT NT4618 as above - LIGHT TECH L4618 as above - LIVING N4618 NT4618 L4618 passive infrared radio detector 3440 passive infrared rays volumetric presence detector - alarm notification LED 12-metre range, 90 angular opening, 17 bands over 4 floors possibility of pulse counter function activation - powered by 1 AA 3.6 V battery, included 3440 3442 3444 magnetic And window-breaking radio detector 3442 magnetic opening detector for doors and windows can be connected with extra magnetic wire contacts (s 3510, 3511 and 3513) supplied with 1 battery 3.6V type 1/2 AA not supplied. 3444 piezoelectric detector to check windows - protection of windows with 3-metre maximum diagonal opening - powered by one 1/2 AA 3.6 V battery, included cable radio detector for rolling shutters 3445 detector to protect rolling shutters or similar winding shutters, made of a rope sensor and radio transmitter - can also manage an opening magnet (supplied) to check the perimeter - powered by one 3.6 V 1/2 AA battery, included 3445 remote control for remote AssistAnce 3448 radio remote control to send remote assistance signals it can be programmed automatically using the item HD/HC/HS/L/N/NT4618 radio receiver - powered by 3V CR2032 type battery supplied as standard - battery life 2 years 510 3448

Devices for radio expansion radio flood detectors HA4619 HB4619 HA4619 HB4619 L4619 Detector with sensor, for detecting flooding caused by any type of liquids supplied with 3V CR2032 alkaline battery as standard. To be fitted with front cover plate and key covers items HC4919 and HS4919-2 modules - AXOLUTE, square as above - AXOLUTE, round as above - LIVING/LIGHT/LIGHT TECH - for key cover, item L/N/NT4919 my HOmE - CATALOGUE L4619 pair of Key covers HD4919 HC4919 HS4919 For flood detector, item HA4619, item HB4619 - AXOLUTE HD4919 HC4919 HS4919 N4919 NT4919 as above, for detector item L4619 - LIGHT as above, for detector item L4619 - LIGHT TECH L4919 as above, for detector item L4619 - LIVING N4919 NT4919 L4919 flood sensor 3482 water detection sensor - to be used together with the contact interface item 3480, in technical alarm mode. 3482 511

MY HOME - CATALOGUE BUrGLAr ALArm Signalling devices and accessories 4072L 4072A 3505/12 outdoor siren with system BAttery 4072L outdoor siren which contains the self-supply battery for the whole system sound signalling can be set from 0 to 10 minutes by means of the central unit to be fitted with 12 V 12Ah battery item 3505/12 sound intensity 105 db(a) at 3 metres light signaller with xenon lamp antifoam grid protected against being pulled off and opened to be used with power supply item E46ADCN or item E48+E48A2. BAttery for outdoor siren item 4072l 3505/12 battery 12 V 12Ah optional outdoor siren 4072A self-supplied outdoor siren sound signalling can be set from 0 to 10 minutes by means of the central unit (1 or 4-zone) to be fitted with 12 V 7Ah battery sound intensity 105 db(a) at 3 metres light signaller with xenon lamp anti-foam grid protected against being pulled off and opened to be used with power supply item E47ADCN or item E48+E48A1. NOTE: The package of outdoor sirens does not include the configurators. These can be purchased separately with the procedure indicated on the Catalogue Accessories page. indoor siren HD4070 HC4070 HS4070 Self-supplied indoor siren can be installed in box 506E - to be fitted with 6 V 0.5Ah battery item 3507/6 - sound intensity 90 db at 3 metres - protected against pulling off and tampering - AXOLUTE N4070 as above - LIGHT - MÀTIX HD4070 HC4070 HS4070 NT4070 as above - LIGHT TECH 4070 as above - LIVING N4070 NT4070 4070 BAtteries 3507/6 6V 0.5Ah battery for indoor siren 3506 batteria 7.2V battery for central unis, item 3485/B L4380/B spare 6 V battery for central units, items HD/HC/HS/L/N/NT4601, and activator item HD/HC/HS/L/N/NT4608 3507/6 3506 L4380/B L4630 tamper L4630 anti-tamper device for the protection of burglar-alarm devices reference notches for adaptation to any type of flush mounted box 512

Ir remote control managed devices 4 Zone central unit N4600/4 NT4600/4 HD4603Z4 HC4603/4 L4600/4 HS4603/4 N4600/4 central unit for the miniaturised system switches the system on and off, controls 4 zones, programs up to 30 remote controls, performs the system test and manages the alarms with signals and memory can set the alarm times and the operation delay of zone 1-3 modules - LIGHT NT4600/4 as above - LIGHT TECH L4600/4 as above - LIVING Zone ActivAtor 1-4 HD4603Z4 HC4603/4 HS4603/4 receiver to switch the system on and off by means of the IR remote control item 4050 - pushbuttons to control 4 zones - signals the status of the zones and the system by LEDs - can disable the light and sound signals. Use only with central unit item 3486 and item L/N/NT4600/4-2 modules - AXOLUTE. my HOmE - CATALOGUE N4603/4 as above - LIGHT NT4603/4 as above - LIGHT TECH L4603/4 as above - LIVING N4603/4 NT4603/4 L4603/4 ActivAtor HD4604 HC4604 HS4604 HD4604 HC4604 HS4604 receiver for the arming/disarming of the system using the remote control, item 4050 - LED system status notification - possibility of disabling visual and sound notifications - possibility of setting the activation of fixed system zones - auxiliary channel available for activation on access controls (electrical door locks). Use only with central unit item 3486 and item L/N/NT4600/4-2 modules - AXOLUTE. N4604 as above - LIGHT NT4604 as above - LIGHT TECH L4604 as above - LIVING N4604 NT4604 L4604 4050 remote control 4050 portable infrared-ray remote control to switch the system on and off - can be automatically coded by means of the central unit - power supply by means of two 3 Volt lithium batteries supplied type CR1616 - life 50,000 operations 513

MY HOME - CATALOGUE TEmPErATUrE COnTrOL Control devices 4 Zone central unit HD4695 HC4695 HS4695 HD4695 HC4695 HS4695 N4695 central unit to manage a temperature control system with max. 4 zones - the TiThermo Basic software, used for programming from PC, is also included in the package - 3 flush mounted module - AXOLUTE as above - LIGHT NT4695 as above - LIGHT TECH L4695 as above - LIVING AM5875 as above - MÀTIX N4695 NT4695 L4695 AM5875 99 Zone central unit 3550 central unit to manage the temperature control system with max. 99 zones - the TiThermo software, used for programming from PC, is also included in the package - wall mounted enclosure BAttery 3507/6 6 V 0.5Ah battery for temperature central unit 3550 3507/6 HD4685 HC4685 HS4685 L4685 N4685 NT4685 local display And temperature probe HD4685 HC4685 HC4685 N4685 NT4685 L4685 1.2 OLED touch screen for the management of one of the following functions: sound system, temperature control and scenarios - AXOLUTE as above - LIGHT as above - LIGHT TECH as above - LIVING 3457 outdoor probe for Local Display 3457 514

Temperature probes HD4693 HD4692 HC4693 HC4692 HS4693 N4693 NT4693 L4693 HS4692 probes HD4693 HC4693 HS4693 N4693 NT4693 L4693 room temperature control probe for heating and cooling systems - temperature adjustment range 3-40 C - 2 modules - AXOLUTE as above - LIGHT as above - LIGTH TECH as above - LIVING KnoB probes HD4692 HC4692 HS4692 N4692 NT4692 L4692 AM5872 room temperature control probe for heating and cooling systems with knob for ± 3 C manual local adjustment of the temperature, compared with the centrally set temperature and for the selection of the OFF and antifreeze modes - AXOLUTE as above - LIGHT as above - LIGTH TECH as above - LIVING as above - MÀTIX my HOmE - CATALOGUE N4692 NT4692 L4692 AM5872 KnoB probes for fan coil HD4692FAN HC4692FAN HS4692FAN HD4692FAN room temperature control probe for heating and cooling systems with HC4692FAN knob for ± 3 C manual local adjustment of the temperature, compared HS4692FAN with the centrally set temperature and for the selection of the OFF and antifreeze modes with selection of the manual/automatic fan-coil speed and idrorelax system - AXOLUTE N4692FAN as above - LIGHT NT4692FAN as above - LIGTH TECH L4692FAN as above - LIVING N4692FAN NT4692FAN L4692FAN 515

MY HOME - CATALOGUE TEmPErATUrE COnTrOL Temperature probes and interfaces radio temperature probe 3455 radio probe to measure the external temperature - use with radio receiving interface item HD/HC/HS4577 - power supply with solar cells or battery - wall mounted enclosure IP65 3455 radio receiving interfaces for probe HD4577 HC4577 HS4577 HD4577 HC4577 HS4577 N4577 radio receiving interface for temperature radio probe item 3455 - power supply 27 Vdc from BUS - 2 modules - AXOLUTE as above - LIGHT NT4577 as above - LIGHT Tech NT4577 as above - LIVING N4577 NT4577 L4577 516

Actuators and interfaces F430/2 F430/4 ActuAtors F430/2 actuator with 2 independent relays for single and double loads: 6A resistive, 3A motorised valves and pumps logical interlock of the relays by means of confi guration 2 DIN modules F430/4 actuator with 4 independent relays - for single, double or combined loads: 4A resistive, 1A motorised valve, pumps and fan-coil logical interlock of the relays by means of confi guration 2 DIN modules contact interface module 3480 interface module for electromagnetic door or window contacts to switch OFF the zone involved - basic enclosure F482 as above - 2 module DIN enclosures my HOmE - CATALOGUE 3480 F482 magnetic contacts 3510 3510M 3510PB 3510 NC electromagnetic contact interface detectors and protection line version for flush mounted 3510M detector as above version in brass with high mechanical resistance for mounting in door frames in non-ferromagnetic material and with low-section trim 3511 3512 3513 3510PB detector as above version in brass with high mechanical resistance for mounting in all types of door frames and in reinforced doors 3511 detector as above version for visible mounting 3512 detector as above die-cast aluminum for swing door or sliding door installations. For floor installations. 3513 detector as above - version for visible mounting for metal surfaces scs-scs gateway F422 interface between systems based on SCS BUS even if dedicated to different functions - 2 shallow DIN modules F422 3456 Air conditioning unit interface 3456 air conditioning unit interface with IR transmitter. Device used for learning and reproducing the IR signals of air conditioning units remote controls. It can be controlled using Touch Screen and Multimedia Touch Screen. Basic mechanism, to facilitate installation behind the air conditioning unit. IR cable length 2 m, 27 V BUS power supply. 517

MY HOME - CATALOGUE Energy management Load management and display Bus meter with memory 3-inputs for toroids F520 Device for the measurement of electric power on three lines, by connecting three toroids to the appropriate inputs. The data collected and processed can be viewed on the Touch Screens. Version for fastening on DIN rail - 1 module. The device is supplied with 1 toroid. Power supply from 27 V BUS. F520 3523 Additional toroid 3523 Additional toroid for bus meter with 3 inputs for toroids item F520, and actuator with current sensor, item F522, for the measurement of the earth leakage current. Cable length 400 mm. The toroid has no direction of installation. 3522 Pulse counter interface 3522 Device for the detection of data from meters (water, gas, etc.) with pulse output. The measured values can be displayed on the Touch Screen. Basic module version, for hidden installation. Power supply from 27 V BUS. F521 Central unit for load management F521 Central unit for the management and control of the actuators of the load management system, to prevent the risk of trips of the electric meter. The central unit manages up to 63 loads maximum, with a power of 1.5 to 18 kw, and a tolerance of up to +/- 20%. The data measured can be displayed on the Touch Screens. Version for fastening on DIN rail - 1 module. The device is supplied with 1 toroid. Power supply from 27 V BUS. 3508BUS 3508U2 3508U3 Removable clamps 3508BUS 3508U2 3508U3 Removable bus clamp width 3.81 mm Removable clamp 2 poles Removable clamp 3 poles 518

Load management ActuAtor din module 16 A with current sensor F522 F522 Actuator with integrated current sensor for the measurement of the consumptions of the controlled load. 1 relay for single load, resistive, 16 A, or 10 A for incandescent lamps and 4 A for fluorescent lamps or ferromagnetic transformers. Zero crossing bistable relay intended for the load control Automation and/ or Management functions. Version for installation on 1 DIN rail module with forcing key. Earth leakage current diagnostic by connecting the additional toroid, item 3523. Power supply from 27 V BUS. my HOmE - CATALOGUE BAse din module ActuAtor 16 A F523 Actuator with relay for single loads: 16 A resistive or 10 A for incandescent lamps and 4 A for fluorescent lamps or ferromagnetic transformers Zero crossing bistable relay intended for the load control Automation and/or Management functions. Version for installation on 1 DIN rail module with forcing key. Power supply from 27 V BUS. F523 AXolute ActuAtor HC4672N HS4672N HD4672N HC4672N HS4672N HD4672N Actuator with 1 relay for single loads: 16 A resistive or 10 A for incandescent lamps and 4 A for fluorescent lamps or ferromagnetic transformers intended for the load control Automation and/or Management functions. Pushbutton to force the load. Power supply from 27 V BUS. L4672N N4672N NT4672N living light light tech ActuAtor L4672N N4672N NT4672N Actuator with 1 relay for single loads: 16 A resistive or 10 A for incandescent lamps and 4 A for fluorescent lamps or ferromagnetic transformers intended for the load control Automation and/or Management functions. Pushbutton to force the load. Power supply from 27 V BUS. 519

MY HOME - CATALOGUE SOUnD SySTEm Audio/video mixers, sound sources Audio/video mixers 346830 video adapter for basic Sound system only one sound source can be installed 2 DIN modules F441 audio/video node to mix audio signals (Max 4 sources) towards 4 outputs 6 DIN modules complete with depth compensator for DIN rail 346830 F441 F441M multi-channel matrix with cross connecting, mixing and switching functions for the distribution of both the stereo sound source signal and for audio/video signals of the 2 wire door entry/video system 8 inputs (first 4 for 2 wire door entry/video system, next for stereo sound sources) and 8 outputs 10 DIN modules complete with depth compensator for DIN rail F441M sound sources F500N FM radio tuner with RDS Storing of up 15 radio stations, display of RDS messages and tuned frequency. Possibility of using the built-in wire antenna, or an external antenna connected using a coaxial cable with MCX-F adapter (supplied). Size 4 DIN modules: including depth compensator for DIN rail. L4561N device to control stereo sources with infrared remote control programmable using the PC - the source can be managed by the amplifiers or the special controls 4 DIN modules complete with RCA/RCA cable and cable with jack to connect the IR transmitter F500N L4561N HD4560 HC4560 HS4560 Flush mounted RCA input - 2 AXOLUTE modules - to control a HS4560 stereo source N4560 as above - LIGHT NT4560 as above - LIGHT TECH L4560 as above - LIVING HD4560 HC4560 HS4560 AM5740 as above - MÀTIX 3495 source insulator to adapt an audio signal from external sound sources, to preserve the SELV features of the BUS. To be used when the sound source is not powered by batteries. 4 female RCA terminals, split between IN (for the connection of the external sound source) and OUT (to be connected to the RCA input item HD/HC/HS/L/N/NT4560 - AM5740) N4560 NT4560 L4560 AM5740 3495 520

Amplifiers and control devices Amplifiers F502 4 DIN module stereo amplifier terminal for connection of SCS bus system and stereo loudspeakers 100-240 Vac power supply F502 H4562 L4562 F503 H4562 L4562 the stereo amplifier, item F503, ensures accurate reproduction of the sound signal, both from the SCS/BUS and, in alternative, from the AUX input (MP3 or CD player, etc.). The wide range of adjustments of high and low tones available, the 10 preset equalisation levels, as well as the additional 10 levels that can be customised by the customer, the virtual surround, to name a few, ensure pleasurable listening in each room, following the taste of the user. Each parameter can be displayed on the OLED graphic display. All the adjustments are performed using the key of the amplifier or remotely suing the Touch Screen devices Flush mounted amplifier two modules to be completed with AXOLUTE series key covers - connection of SCS bus system and stereo loudspeakers functions of: switching stereo loudspeakers ON/OFF, volume control, source cycle function and changing radio station or CD track flush mounted amplifier as above two modules to be completed with LIVING, LIGHT and LIGHT TECH pushbutton covers my HOmE - CATALOGUE F503 AM5742 flush mounted amplifier as above - to be completed with MÀTIX pushbutton covers controls H4651M2 special control to manage amplifiers to be completed with AXOLUTE pushbutton covers to switch on/off, control volume, change source and change programmed radio stations 2 modules H4651M2 L4651M2 L4651M2 as above - to be completed with LIVING, LIGHT and LIGHT/TECH pushbutton covers AM5831M2 as above - to be completed with MÀTIX pushbutton covers KnoB control HD4563 HC4563 HS4563 AXOLUTE Flush mounted device with knob to manage switching ON/ OFF, volume control and changing programmed radio station or CD track size 2 modules HD4563 HC4563 HS4563 N4563 NT4563 as above - LIGHT as above - LIGHT TECH L4563 as above - LIVING N4563 NT4563 L4563 521

MY HOME - CATALOGUE SOUnD SySTEm Control devices soft touch control HD4653M2 - HD4653M3 HC4653/2 - HC4653/3 HS4653/2 - HS4653/3 HD4653M2 HC4653/2 HS4653/2 HD4653M3 HC4653/3 HS4653/3 2-module touch control to switch stereo loudspeakers ON/OFF and adjust the volume 2-module touch control to switch stereo loudspeakers ON/OFF and adjust the volume vetro white HD4657M3 whice HC4657M3 nighter HD4657M4 HC4657M4 digital glass controls MY HOME control for the control of single or group loads (e.g. lights and rolling shutters), sound system, scenarios, basic audio door entry functions (e.g. gate opening). The configuration can be performed in two separate ways: physical configuration (connecting the physical configurators to their sockets), or virtual configuration (the control can be configured remotely). It is fitted with capacitive soft touch keys that can be identified using adjustable intensity LEDs. WHITE GLASS HD4657M3 6-key control size 3 modules HD4657M4 8-key control size 4 modules WHICE HC4657M3 6-key control size 3 modules HC4657M4 8-key control size 4 modules NIGHTER HS4657M3 6-key control size 3 modules HS4657M4 8-key control size 4 modules NOTE: for WHITE glass controls contact your local BTicino sales representative to check availability. HS4657M3 HS4657M4 522

Controls and radio interface, Ir controls HA4572SB L4572SB HB4572SB 3527 radio controls HA4572SB radio control with standalone power supply (no battery required) used in the MY HOME Sound system with interface item HD/HC/HS4575SB management of all the control functions: switching ON/OFF, volume control, source cycle and changing radio station or CD track surface installation with double-sided adhesive tape or screws and dowels to be completed with AXOLUTE key covers and two-module rectangular cover plate HB4572SB control as above to be completed with AXOLUTE key covers and twomodule elliptical cover plate L4572SB control as above to be used with interface item L/N/NT4575SB - to be completed with LIVING, LIGHT and LIGHT TECH key covers and twomodule cover plate 3527 remote control with 6 customizable pushbuttons with graphic labels. Set up for used by disabled people power supply with two 1.5 Volt AAA batteries - used in MY HOME Sound systems with interface item HD/ HC/HS4575 - L/N/NT4575N - management of all the control functions: switching ON/OFF, volume control, source cycle and change radio station or CD track my HOmE - CATALOGUE HD4575 HD4575SB N4575N N4575SB HC4575 HC4575SB NT4575N NT4575SB HS4575 HS4575SB L4575N L4575SB radio receiving interfaces HD4575 AXOLUTE interface for remote control item 3527-2 modules HC4575 HS4575 N4575N as above - LIGHT NT4575N as above - LIGHT TECH L4575N as above - LIVING HD4575SB AXOLUTE for control item HA/HB4572SB - size 2 modules HC4575SB HS4575SB N4575SB LIVING interface for radio control item L4572SB size 2 modules NT4575SB as above - LIGHT TECH L4575SB as above - LIVING HD4654 HC4654 HS4654 Active infrared receivers HD4564 HC4654 HS4654 N4654N NT4654N L4654N AM5834 AXOLUTE receiver for the remote control by means of remote control - up to 16 actuations or scenarios saved in the scenario module item F420 as above - LIGHT as above - LIGHT TECH as above - LIVING as above - MÀTIX N4654N NT4654N L4654N 3529 remote controls 3529 device for receiver control (up to 16 receivers within the same room) - possibility to select up to 16 channels directly - powered by two 1.5 V AAA batteries. 523

MY HOME - CATALOGUE SOUnD SySTEm Loudspeakers HD4565 HC4565 HS4565 flush mounted loudspeakers HD4565 HC4565 HS4565 N4565 NT4565 L4565 H4570 16 Ω flush mounted loudspeaker for 506E and PB526 boxes power 12 W AXOLUTE 16 Ω flush mounted loudspeaker for 506E and PB526 boxes power 12 W LIGHT 16 Ω flush mounted loudspeaker for 506E and PB526 boxes power 12 W LIGHT TECH 16 Ω flush mounted loudspeaker for 506E and PB526 boxes power 12 W LIVING 8 Ω flush mounted loudspeaker for MULTIBOX 4 module boxes item 16104 2-way power 100 W - AXOLUTE N4565 NT4565 L4565 H4570 wall mounted loudspeakers L4567 wall mounted ultra-flat 8 Ω loudspeaker D = 35 mm power 40 W 2 way - white L4569 external 8 Ω loudspeaker IPx4 with fastening brackets to adjust the tilt power 140 W 2 way black L4567 L4569 524

Loudspeakers, connectors and line terminators L4568 L4566 L4566/10 ceiling mounted loudspeakers L4566 8 Ω ceiling mounted loudspeaker L=240 mm 2-way power 100 W white L4566/10 8 Ω ceiling mounted and plasterboard loudspeaker L=100 mm power 20 W white L4568 8 Ω loudspeaker with the same dimensions as a ceiling mounted panel (60x60 cm) for installation in the ceiling power 50 W - white my HOmE - CATALOGUE 349418 349414 349415 connectors for interfacing the Bus cable to sound system devices 349418 349414 349415 AXOLUTE 8-contact connector to connect item F500, F500COAX, item L4561N and item 3465 to the BUS (PIN 5 and 6 to be wired) 336982 as above - LIGHT 336984 as above - LIGHT TECH 336983 as above - LIVING 336985 as above - MÀTIX 336982 336984 336983 336985 3499 line terminator 3499 line terminator to be installed on the used outputs of the audio/video node 525

MY HOME - CATALOGUE SOUnD SySTEm Key covers AXolute lightable Key covers 1 module Pushbutton covers with silk-screen printing for flush mounted amplifiers or for special controls HC4911AF HD4911AF HS4911AF HC4911AI HD4911AI HS4911AI HC4911BE HD4911BE HS4911BE HC4911BF HD4911BF HS4911BF AXolute WHITE TECH ANTHRACITE HD4911AF HC4911AF HS4911AF ON-OFF-GEN HD4911AI HC4911AI HS4911AI ON-OFF-adjustment HD4911BE HC4911BE HS4911BE Treble clef symbol HD4911BF HC4911BF HS4911BF Sound system functions light - light tech - living L4911AF N4911AFM NT4911AFM L4911AI N4911AIM NT4911AIM L4911BE N4915BEM NT4915BEM L4911BF N4911BF NT4911BF light - light tech - living LIGHT LIGHT TECH LIVING N4911AFM NT4911AFM L4911AF ON-OFF-GEN N4911AIM NT4911AIM L4911AI ON-OFF-adjustment N4915BEM NT4915BEM L4911BE Treble clef symbol N4911BFM NT4911BFM L4911BF Sound system functions màtix AM5911AF AM5911AI AM5911BE AM5911BF màtix AM5911AF AM5911AI AM5911BE AM5911BF ON-OFF-GEN ON-OFF-adjustment Treble clef symbol Sound system functions Key-covers for radio controls AXolute Pushbutton covers for radio controls item HA/HB4572SB HD4919SB HC4919SB HS4919SB WHITE TECH ANTHRACITE HD4919SB HC4919SB HS4919SB light - light tech - living Pushbutton covers for radio controls item L4572SB N4919SB NT4919SB L4919SB LIGHT LIGHT TECH LIVING N4919SB NT4919SB L4919SB 526

Integration and expansion devices 346841 346851 346850 integration And expansion devices 346841 floor distribution block to be used together with the audio/video node item F441 and the DIN rail amplifiers item F502 for the complete saturation of an audio/video node output 346851 system expansion module to make large systems in which a maximum of 140 loudspeakers can be installed 4 DIN modules 346850 apartment interface for the connection to the apartment block riser of an independent video door entry system combined with the MY HOME applications (Sound system, Automation etc ) 4 DIN modules my HOmE - CATALOGUE 527

MY HOME - CATALOGUE VIDEO DOOr EnTry SySTEm AnD CCTV AXOLUTE Outdoor pushbutton panel flush mounted BoX with tearing protection 339313 3 module flush mounted steel box with tearing protection. The SFERA 3 module flush mounted box, item 331130, may also be used in alternative 339313 349140 electronic module 349140 outdoor AXOLUTE electronic module for 2-wire video door entry system. It s fitted with capacitive soft touch control backlit keypad, motorised colour camera (which swivelling operation can be controlled from the preset handsets), colour display with home page that can be fully customised by the installer, and transponder reader for the release of the door lock, which may also be activated using a numeric code for residents. Module to be finished with flush mounted box, item 339313, and surround plate, item 339213 (steel), or 339223 (brass). TiAxoluteOutdoor and TiContacts programming software, residents address book creation, and configuration supplied. By locally installing a permanent cable with RJ45 socket (T568B type cross connection), it is possible to update the residents address book and the configuration, without removing the pushbutton panel. The device meets the following characteristics: Protection index IP54, protection index against mechanical impact IK07 surround plate + frame 339213 3-module surround plate + frame in steel finish. Anti-tamper assembly/ disassembly safety key supplied 339223 brass finish 3 module plate+frame. Anti-tamper assembly/disassembly safety key supplied 339213 339223 transponder Keys And programmer 348200 black transponder key 348200 348201 348202 348203 348201 red transponder key 348202 green transponder key 348203 blue transponder key 348204 orange transponder key 348205 grey transponder key 528 348204 348205 348206 348402 348206 yellow transponder key 348402 table-top transponder key programmer

SFErA outdoor pushbutton panels flush mounted BoX + chassis rainshield (optional) wall mounted enclosure with rainshield electronic modules 331110 1 module 331411 1 module only Allmetal finish 331311 1 module only Allmetal finish 342170 (audio) 342560 (audio + camera) my HOmE - CATALOGUE 342510 (b/w camera) 342550 (colour camera) 331120 2 modules 331421 2 modules only Allmetal finish 331321 2 modules only Allmetal finish 342170 (audio) 342510 (b/w camera) 342550 (colour camera) 342170 (audio) 331130 3 modules 331441 3 modules only Allmetal finish 331331 3 modules only Allmetal finish 342200 (nameplate) 529

MY HOME - CATALOGUE VIDEO DOOr EnTry SySTEm AnD CCTV SFErA outdoor pushbutton panels modular front covers surround plate for modular front covers monobloc front covers 332111 Allmetal 332121 Allmetal 332112 White 332122 White 332113 Alugray 332123 Alugray 331211 Allmetal 331212 White 331213 Alugray 333114 Allsteel 333124 Allsteel 342471 Allmetal 342481 Allmetal 342472 White 342482 White 342473 Alugray 342483 Alugray 333115 Allbrass 333125 Allbrass 332511 Allmetal 332512 White 332513 Alugray 333814 Allsteel 333824 Allsteel 332111 Allmetal 332112 White 332113 Alugray 332121 Allmetal 332122 White 332123 Alugray 331221 Allmetal 331222 White 331223 Alugray 333815 Allbrass 333825 Allbrass 332511 Allmetal 332512 White 332513 Alugray 332111 Allmetal 332121 Allmetal 332112 White 332122 White 332113 Alugray 332123 Alugray 530 332201 Allmetal 332202 White 332203 Alugray 331231 Allmetal 331232 White 331233 Alugray

LInEA 2000 metal outdoor pushbutton panels wall mounted pushbutton panels 342991 343001 342992 343002 342991 zamak 2-WIRE video door entry pushbutton panel with colour camera and 1 call key. The camera can be swivelled on 2 axes. operating status signalling LED for: communication active, door lock release, call sent / system busy. Blue LED backlit name plate. Protection index against mechanical impact IK07. Wall mounted installation 342992 zamak 2-WIRE video door entry pushbutton panel with colour camera and 2 call keys. The camera can be swivelled on 2 axes. operating status signalling LED for: communication active, door lock release, call sent / system busy. Blue LED backlit name plate. Protection index against mechanical impact IK07. Wall mounted installation flush mounted pushbutton panels 343001 zamak 2-WIRE video door entry pushbutton panel with colour camera and 1 call key. The camera can be swivelled on 2 axes. operating status signalling LED for: communication active, door lock release, call sent / system busy. Blue LED backlit name plate. Protection index against mechanical impact IK10. Wall mounted installation 343002 zamak 2-WIRE video door entry pushbutton panel with colour camera and 2 call keys. The camera can be swivelled on 2 axes. operating status signalling LED for: communication active, door lock release, call sent / system busy. Blue LED backlit name plate. Protection index against mechanical impact IK10. Flush mounted installation my HOmE - CATALOGUE gate opening relay module 346250 346250 gate opening relay module to be used with LINE 2000 METAL pushbutton panels. It can be used to release door locks (NOT managed through the BUS) from the entrance panel Colour camera White LEDs for night lighting Conversation active signalling LED Call sent/system busy signalling LED Name plate White LEDs for night lighting Door lock release LED Call sending pushbutton 531

MY HOME - CATALOGUE VIDEO DOOr EnTry SySTEm AnD CCTV AXOLUTE video handsets 349320 nighter video station 349320 2-WIRE speaker phone video handset for wall mounted installation. With 8 colour LCD display, backlit capacitive keypad with soft touch controls and PC customisable OSD navigation icon menu for the management of the following MY HOME applications: video door entry system, temperature control, sound system, automation (scenarios) and anti-intrusion. In systems integrated with the sound system, the VIDEO STATION behaves as an amplifier, enabling playback of all audio/video sources connected to the system. Keys available: navigation, auto-switch on, door lock release, staircase lights, mute, speaker phone/ pager connection, and call exclusion. LED signalling for: call exclusion, door status, and connection. Firmware update/programming USB port. It can be integrated with MY HOME, also in combination with the Multimedia interface, item 3465 - (in this case, allow for a local video door entry system power supply). Suitable for wall mounted installation using the special bracket (supplied as standard). It can be configured using physical configurators or the TiNighterandWhiceStation programming and configuration software (supplied as standard) 349321 whice video station 349321 2-WIRE speaker phone video handset for wall mounted installation. With 8 colour LCD display, backlit capacitive keypad with soft touch controls and PC customisable OSD navigation icon menu for the management of the following MY HOME applications: video door entry system, temperature control, sound system, automation (scenarios) and anti-intrusion. In systems integrated with the sound system, the VIDEO STATION behaves as an amplifier, enabling playback of all audio/video sources connected to the system. Keys included: navigation, auto-switch on, door lock release, staircase lights, mute, speaker phone/ pager connection, and call exclusion. LED signalling for: call exclusion, door status, and connection. Firmware update/programming USB port. It can be integrated with MY HOME, also in combination with the Multimedia interface, item 3465 - (in this case, allow for a local video door entry system power supply). Suitable for wall mounted installation using the special bracket (supplied as standard). It can be configured using physical configurators or the TiNighterandWhiceStation programming and configuration software (supplied as standard) 349310 349210 349211 video station 349310 2-WIRE speaker phone video handset for wall mounted installation. With 5.6 colour LCD display with PC customisable OSD navigation icon menu for the management of the following MY HOME applications: video door entry system, temperature control, sound system, automation (scenarios) and anti-intrusion. In systems integrated with the sound system, the VIDEO STATION behaves as an amplifier, enabling playback of all audio/video sources connected to the system. Keys included: navigation, auto-switch on, door lock release, mute function, speaker phone/ pager connection, and call exclusion. LED signalling for: call exclusion, door status, and connection. Firmware update/programming USB port. Suitable for wall mounted installation using the special bracket (supplied as standard). It can be configured using physical configurators or the TiAxoluteStation programming and configuration software (supplied as standard). 349210 surround plate in satin-finished aluminium 349211 Kristall glass finishing surround plate 349212 Teak surround plate 532 349212

AXOLUTE ETÈrIS video handset 349340 349243 349241 349242 video display etèris 349340 2-WIRE speaker phone video handset for wall mounted installation. With 2.5 colour LCD display with PC customisable OSD navigation icon menu for the management of the following MY HOME applications: video door entry system, temperature control, sound system, automation (scenarios) and anti-intrusion. Keys included: navigation, auto-switch on, door lock release, speaker phone connection. LED signalling for: call exclusion, bells, door status, and connection. Firmware update/ programming USB port. Flush mounted installation using the specific boxes, item 528W (masonry) and item PB528W (plasterboard). To be completed using the front covers and the finishing cover plates, items HW4826HC, HW4826HS, HW4826HD. It can be configured using physical configurators or the TiAxoluteDisplay programming and configuration software (supplied as standard) 349243 white finish front cover plate 349241 Tech finish front cover plate 349242 Anthracite finish front cover plate my HOmE - CATALOGUE installation diagram HW4826HC 528 W (128.5x128.5x58 mm) 349243 349340 349241 HW4826HS PB528 W (116.5x116.5x58 mm) 349242 HW4826HD 533

MY HOME - CATALOGUE VIDEO DOOr EnTry SySTEm AnD CCTV AXOLUTE VIDEO DISPLAy video handsets 349313 349311 video display 349313 2-WIRE speaker phone video handset for flush mounted installation. With 2.5 colour LCD display with PC customisable OSD navigation icon menu for the management of the following MY HOME applications: video door entry system, temperature control, sound system, automation (scenarios) and anti-intrusion. Keys included: navigation, auto-switch on, door lock release, speaker phone connection. LED signalling for: call exclusion, door status, and connection. Firmware update/programming USB port. suitable for flush mounted installation using item 506 boxes. To be completed with finishing plate (all those suitable for item 506E of the AXOLUTE series). It can be configured using physical configurators or the TiAxoluteDisplay programming and configuration software (supplied as standard). 349311 as item 349313 - Tech 349312 as item 349313 - Anthracite 349312 video display table-top BAse 349319 AXOLUTE Video Display video handset table-top base. It can be connected to the system using the cable item 336813 and an 8 pole socket (item 349413, item 349414, item 349415). To be completed with the rectangular front cover plates for item 506E of the AXOLUTE civil series 349319 349413 349414 349415 table-top installation 8 pole plug 349413 Axolute 8 pole plug for table-top connection of the AXOLUTE Video Display video handsets. White 349414 Axolute 8 pole plug for table-top connection of the AXOLUTE Video Display video handsets. Tech 349415 Axolute 8 pole plug for table-top connection of the AXOLUTE Video Display video handsets. Anthracite 534

POLyX audio and video handset 344163 polyx memory display 344163 wall mounted installation 2-WIRE speaker phone video handset with audio and video memory. With 3.5 colour LCD display with PC customisable OSD navigation icon menu for the management of the following MY HOME applications: video door entry system, temperature control, sound system, scenarios and anti-intrusion. With video door entry system answering machine with call memory function. LED signalling for: call exclusion, door status, connection with entrance panel, and answering machine status. Suitable for wall mounted installation using the special bracket (supplied as standard). Configuration using the physical configurators or the TiPolyxMemoryDisplay software supplied as standard with the product polyx Audio 344082 wall mounted speaker phone handset. Performs all the traditional video door entry system functions. It does not provide management of MY HOME applications. It can be configured using physical configurators my HOmE - CATALOGUE 344082 Key for enabling/disabling the audio/video answering machine with signalling LED Door lock release key with signalling LED Icon menu navigation keys Communication key with signalling LED EP/ camera cycling activation key 535

MY HOME - CATALOGUE VIDEO DOOr EnTry SySTEm AnD CCTV DIn modular devices 346830 F441M F441 video mixer 346830 2 DIN modules video adapter. For connecting 3 BUS to the system. It is therefore possible to install systems with 2 video entrance panels and 1 riser, as well as systems with one video entrance panel and 2 risers. The device must be used with system power supply item 346000 F441 6 DIN modules audio/video node preset with 4 input clamps and 4 output clamps. It can be used for connecting up to 4 source device posts (entrance panels or cameras) on the input and up to 4 2-wire video risers on the output. The device must be used with system power supply item 346000. It must be used in alternative to the audio/video adapter, item 346830 F441M 10 DIN modules audio video matrix. Preset for the connection of video door entry system entrance panels, cameras and sound system sources on the input, and entrance panels and amplifiers on the output. Four inputs are for entrance panels/cameras, and 4 for sound system sources. It enables to create multichannel sound system. The device must be used with system power supply item 346000. Within the systems, it replaces the video adapter, item 346830, and the audio/video node, item F441. 346850 346851 system interface 346850 apartment interface in 4 DIN modular housing. It can be used to interface to a 2-wire riser a dedicated apartment video door entry system with local video monitoring system, sound system, and MY HOME applications control. The device must be configured using physical configurators 346851 system expansion interface with modular 4 DIN housing. It enables doubling of the length of the entrance panel - handset line, to create independent audio risers, and to expand the range or functions of the apartment system. The device must be configured using physical configurators 536

DIn actuators and system accessories 346200 346230 346260 346841 347400 346833 din ActuAtors 346200 relay actuator with 4 DIN modular housing. it can be used for switching the lights on, opening the gates, repeating calls on bells (MOD=SLA), or for controlling other devices using the video handsets. The device must be configured using physical configurators 346230 door lock relay actuator with 2 DIN modular housing. For the power supply and activation of an electrical door lock. The device must be configured using physical configurators 346260 timed door lock relay actuator with 4 DIN modular housing. It can be used for switching the lights on, opening gates, or manage electromagnetic door locks, timed door opening, and door lock status (with NC contact). The device must be configured using physical configurators BAsic housing devices 346841 4-output floor shunt Automatically adapts the video signal, allowing star type distribution 346833 call to the floor interface. By connecting traditional pushbuttons, the following functions will be possible: general call to the floor, addressed call to the floor, staircase lights on, and door lock release (specific actuator needed). The device must be configured using physical configurators 347400 interface for the conversion of the coaxial signal into a 2-WIRE BUS signal It can be used to connect to the BUS of the video door entry system a camera with coaxial video output powered at 12 Vdc, with maximum absorption 150 ma and 1 Vpp video output (75 Ω) my HOmE - CATALOGUE 336904 3501K system cable 336904 specific cable for video door system applications with 2 twisted conductors. It can be installed in underground piping, in accordance with CEI 20-13 e CEI 20-14 standards. It ensures the best performance in video systems (higher distance between EP and Handset when compared with other cables). 200 m coil configurators (10 piece pack) 3501/0 configurator 0 3501/1 configurator 1 3501/2 configurator 2 3501/3 configurator 3 3501/4 configurator 4 3501/5 configurator 5 3501/6 configurator 6 3501/7 configurator 7 3501/8 configurator 8 3501/9 configurator 9 configurator Kit 3501K configurator kit consisting of: - 10 pieces for each type of configurator from 0 to 9-2 blue removable 8-clamp connectors - 2 green removable 2-clamp connectors - 1 configurator connection tool - 1 plastic screwdriver 537

MY HOME - CATALOGUE VIDEO DOOr EnTry SySTEm AnD CCTV 2-wIrE cameras 391658 391659 391657 indoor cameras 391658 flush mounted colour camera in LIGHT finish. 3.7 mm fixed optics, 1/3 CCD, 380 horizontal lines resolution. With microphone. The device must be configured using physical configurators 391659 as item 391658 - LIGHT TECH 391657 as item 391658 - LIVING 391663 as item 391658 - White AXOLUTE 391661 as item 391658 - AXOLUTE TECH 391662 as item 391658 - Anthracite AXOLUTE 391663 391661 391662 outdoor camera 391670 compact colour camera with IP 65 housing, fixed 6 mm optics, 1/3 CCD, 330 horizontal lines resolution. The device must be configured using physical configurators 391670 538

InTEGrATIOn AnD COnTrOL System integration device scs-scs gateway F422 interface between systems based on SCS BUS even if dedicated to different functions - 2 shallow DIN modules F422 gateways for different systems F426 F427 SCS/EIB gateway - for the control of EIB systems using MY HOME systems SCS/KNX gateway - for exchange of information between the Automation system and the standard KNX system my HOmE - CATALOGUE F426 F427 scs/dali gateway F429 DALI dimmer, 8 independent outputs with maximum load of 16 ballasts at 230 Vac, clamp connection, protection index IP20, 6 DIN modules, power supply 27 Vdc from bus, absorption 5 ma, direct load control pushbutton F429 539

MY HOME - CATALOGUE InTEGrATIOn AnD COnTrOL Local control devices local display HD4685 HC4685 HS4685 1.2 OLED touch screen for the management of one of the following functions: sound system, temperature control and scenarios - AXOLUTE HD4685 HC4685 HS4685 N4685 NT4685 as above - LIGHT as above - LIGHT TECH L4685 as above - LIVING N4685 NT4685 L4685 touch screen H4684 3.5 colour Touch Screen for the management of the lighting, automation, burglar alarm, temperature control, sound system, scenario and energy management functions - AXOLUTE HW4684 as above - AXOLUTE ETÈRIS L4684 as above - LIVING, LIGHT and LIGHT TECH AM5864 as above - MÀTIX H4684 - L4684 AM5864 etèris touch screen HW4684 as above - AXOLUTE Etèris monobloc. Only installable on boxes item 528W (masorny wall) and item PB528W (plasterboard) HW4684 ip touch screen AdApter 3496 accessory to be used with TOUCH SCREEN - it can be used for playing audio tracks stored on the PC, or on the server, as well as any IP radio content (e.g. radio), through the loudspeakers of the 2-WIRE sound system - to be installed on the back of TOUCH SCREEN units 540

Local control devices multimedia touch screen HD4690 HS4690 HC4690 HD4690 HC4690 HS4690 10 Touch Screen with 16/9 LCD screen for the management of the following functions: - Lighting, automation, burglar alarm. Temperature control, sound system, scenarios and energy management - Video door entry system and cctv - Management of external sources (USB and SDCard) or IP (radio IP, RSS, Webcam) multimedia contents. Wall mounted installation. Presetting with cable collection 506E flush mounted box. To be completed with the appropriate surround plate surround plates for multimedia touch screen HA4690XC surround plate in satin-finished aluminium HA4690VBB white surround plate HA4690LTK Teak surround plate HA4690VNB Nighter surround plate HA4690VSW Whice surround plate my HOmE - CATALOGUE surround plate range HA4690VBB HA4690VSW HA4690XC HA4690VNB HA4690LTK 541

MY HOME - CATALOGUE InTEGrATIOn AnD COnTrOL Local control devices multimedia interface 3465 interface for managing all MY HOME system applications and multimedia contents using any television or monitor (PAL) screen, and through the Nighter or Whice Video Stations 3465 video touch screen H4687 flush mounted panel PC with 15 Touch Screen display for the control of the MY HOME system using the MHVisual software H4687 software mhvisual MHVISUAL control & management software for the lighting, automation, burglar alarm, temperature control, sound system, scenarios, energy management and video monitoring system functions MHVISUAL 336983 336982 336984 336985 multimedia interface connectors 349418 white finish AXOLUTE connector with 8 contacts for the connection between the BUS cable and the multimedia interface 349414 as above - AXOLUTE light finish 349415 as above - AXOLUTE dark finish 336983 as above - LIVING 336982 as above - LIGHT 336984 as above - LIGHT TECH 336985 as above - MÀTIX 542

Local control devices video station 349310 349210 349211 349212 349310 speaker phone video handset for wall mounted installation. 5.6 LCD colour display with icon menu. It can be integrated with the MY HOME system and has an icon navigation menu that can be customised using the PC, capable of managing the following applications: video door entry system, temperature control, sound system, scenarios, and alarms. Keys included: navigation, auto-switch on, door lock release, staircase lights, mute, speaker phone and pager connection. Signalling LEDs for: call exclusion, door lock status control, office function, connection. Configuration using physical configurators and the menu. Programming USB and RS232 port. Suitable for wall mounted installation using a special bracket supplied. Configuration and customisation software supplied. To be completed with dedicated surround plate in glass, wood, and aluminium 349210 surround plate in satin-finished aluminium 349211 Kristall glass finishing surround plate 349212 Teak surround plate my HOmE - CATALOGUE video station nighter And whice 349320 349320 speaker phone video handset, NIGHTER series for wall installation. With 8 colour LCD display, backlit capacitive keypad with soft touch controls and PC customisable navigation menu for the management of the following MY HOME applications: video door entry system, temperature control, sound system, automation (scenarios) and anti-intrusion. In systems integrated with the sound system, the device behaves as an amplifier, enabling playback of all audio/video sources connected to the system. Keys included: navigation, auto-switch on, door lock release, staircase lights, mute, speaker phone/ pager connection, and call exclusion. Notification for: call exclusion, door status, and connection. It can be integrated with MY HOME also when used with the multimedia interface, item 3465. Suitable for wall mounted installation using the special bracket (supplied as standard). Programming and configuration TiNighterandWhiceStation software (supplied) 349321 speaker phone handset as above - WHICE 349321 543

MY HOME - CATALOGUE InTEGrATIOn AnD COnTrOL Local control devices 349313 349311 video display 349313 flush mounted and table-top installation speaker phone handset in white finish. 2.5 LCD colour display and icon menu. It can be integrated with the MY HOME system and has an icon navigation menu that can be customised using the PC, capable of managing the following applications: video door entry system, temperature control, sound system, scenarios and alarms. Keys included: navigation, auto-switch on, door lock release, speaker phone and pager connection. Signalling LEDs for: call exclusion, door lock status control, office function, connection. Configuration using physical configurators, the menu, and the software supplied. Programming USB port. Suitable for flush mounted installation using item 506 boxes. To be completed with finishing plate (all those suitable for item 506E of the AXOLUTE series) 349311 as item 349313 - Tech 349312 as item 349312 - ANTHRACITE 349312 349340 etèris video display 349340 Monobloc Etèris Video Display. Only installable in item 528W (masonry) and item PB528W (plasterboard) boxes and with cover plates items HW4826HC, HW4826HS, HW4826HD. The functions are the same as the other Video Displays already in the Catalogue: items 349311, 349312, 349313 349243 white front cover for Video Display Etèris, item 349340 349241 tech front cover as above 349242 anthracite front cover as above 349243 349241 349242 polyx memory display 344163 wall mounted video speaker phone handset with 3.5 colour monitor and icon menu. With audio and video call answering machine. For the control of MY HOME applications; with PC customisable navigation menu for the management of the video door entry system, temperature control, sound system, scenarios and alarms. Suitable for wall mounted installation using a special bracket supplied. Configuration using physical configurators, the menu, and the software supplied. Programming USB port 344163 544

Scenario management devices scenario programmer MH200N 346020 MH200N device for the execution of scenarios programmed using TiMH200N. The scenario may be combined with times and dates, manual activations, events managed through AUX channels, or generated by the Automation, temperature control and burglar alarm systems. The device can operate as a gateway for the use of the MHVisual and Virtual Configurator software. Size 6 DIN modules. 346020 additional mini power supply (2 DIN) for the powering of the MH200N scenario programmer scenario module F420 device for saving 16 scenarios for automation, sound system, temperature control, and video door entry system applications - 2 DIN modules my HOmE - CATALOGUE F420 remote control devices Audio/video web server F453AV audio/video web server for the remote control of the system using web pages or the MY HOME portal. The device can operate as a gateway for the use of the MHVisual and Virtual Configurator software F453 Web server for the remote control of the system using web pages or the MY HOME portal. The device can operate as a gateway for the use of the MHVisual and Virtual Configurator software F453AV 346020 mini power supply for F453AV and F453 web server - 2 DIN modules F453 346020 central unit with communicator 3485 POLYX ALARM central unit with system self-learning function, and display of the configuration on the screen. Managing up to 72 sensors and 8 zones, and possibility to set up to 16 user scenarios. Fitted with PSTM telephone communicator for alarm forwarding. Wall mounted installation. Battery powered, using item 3506 battery, supplied as standard 3486 central unit as above, fitted with integrated PSTN and GSM telephone communicator for alarm forwarding. Wall mounted or flush mounted installation in Multibox boxes. Use with battery item 3507/6. 3485 3486 545

MY HOME - CATALOGUE InTEGrATIOn AnD COnTrOL remote control devices pstn telephone ActuAtor F461/2 telephone actuator, 2 independent relays, with exchange contact, 230 Vac power supply - 3 DIN modules F461/2 F462 gsm telephone ActuAtor F462 GSM telephone actuator for enabling/disabling of loads via SMS. It provides interaction with BTicino timer thermostats and the possibility of managing 2 alarm inputs - 4 DIN modules C9450 Adsl modem router C9455 C9450 MH300 MH301 HUB-Switch to be used with item MH300 for expanding the LAN network. 10-35 Vdc power supply 6 DIN modules external HUB-Switch to be used with item MH300 for expanding the LAN network. 230 Vac power supply Anchoring magnet. ADSL Wi-Fi Modem-Router. To be used for connecting the Web Servers to the ADSL line. It enables wireless connection to the Web Server, and the creation of a LAN Wi-Fi network. Power supply and management software supplied Wi-Fi Access Point. To be used in systems with existing ADSL modem router, to create a LAN Wi-Fi network. When used as a repeater, it enables creating Wi-Fi networks on several floors of the home. Power supply supplied C9455 MH300 MH301 546

STrUCTUrED CABLInG SySTEm FOr THE HOmE SECTOr Signal management devices F444U4 F558 F551 F555 digital signal devices F444U4 ADSL modem router with 4 RJ45 ports - for fitting on DIN 35 rail. 10 35 Vdc power supply Width 10 DIN35 modules. F551 10/100 Mbs switch - 5 ports for the distribution of 1 LAN line to 4 lines. Several Switches can be added to setup more lines. telephone signal devices F558 XDSL filter with 3 way telphone distribution frame for the separation of the ADSL data line from the telephone line. Possibility of connection with 8 output telephone distribution frame, item F555, to increase the number of lines. F555 8 output telephone distribution frame to distribute 1 telephone line to 8 different sockets, or 2 telephone lines to 4 sockets. Possibility of connection to several distribution frames to increase the number of lines. my HOmE - CATALOGUE F442 television signal devices F442 F553 Modulation device for the display of the 2 wire video door entry system entrance panel call directly on TV. Installation in conjunction with the TV/SAT item F553 distribution frame. 10 35 Vdc power supply. Width: 6 DIN 35 modules. Presetting of an antenna F type input connector and an output (F type) for the television, and a 2 clamp connector for the 2 wire BUS. Universal TV/SAT distribution frame (5 2400 MHz) for the distribution of the signal to 6 separate TV jacks. F type connection clamps. F553 547

MY HOME - CATALOGUE STrUCTUrED CABLInG SySTEm FOr THE HOmE SECTOr Data connectors and accessories F550C6 L4665L20 L4665L40 F552 L4664 Accessories F550C6 Cat. 6 module for the patching of the wiring inside the star centre cabinet. Reversible connectors for the connection of cables to the user sockets from the top or from the floor. F552 9 V, 1.6 A power supply for the power supply of the switch, item F551. L4665L20 FLAT type patch cord with RJ45 connectors - category 6 - PVC cable sheath - with built in SNAGGLE - in accordance with EN 50173-1 and EIA/ TIA 568 A/B standards. Length: 20 cm L4665L40 Patch cord - as above Length: 40 cm L4664 Telephone cable, with RJ45 and RJ11 connectors, for the connection of devices with RJ11 connector to devices with RJ45 connector. Length: 200 cm 32... cat. 6 cables Category 6 U/UTP unshielded cable with 24 AwG (0.51) solid copper conductors, with polyolefin insulation, 4 pair of twisted conductors with internal partition - performance 500 mhz - in accordance with ISO/IEC 11801 and 2.0, En 50173-1 and EIA/TIA 568 B2.10 standards- blue. U/UTP Sheat Length Packaging 32754 LSZH 305 m coil 32871 LSZH 1000 m coil 32872 PVC 1000 m coil rj45 connectors used with the civil series HD4279C6A HC4279C6A HS4279C6A RJ45 connectors fitted with metal shield, identification plate, and dust cover. - 1 module - AXOLUTE N4279C6A as above - LIGHT HD4279C6A HC4279C6A HS4279C6A NT4279C6A L4279C6A as above - LIGHT TECH as above - LIVING N4279C6A NT4279C6A L4279C6A 548

TV connectors television signal devices HD4202 D N4202D HC4202D NT4202D HS4202D L4202D HD4202D HC4202D HS4202D N4202D NT4202D L4202D f type tv connector direct (shunted) coaxial sockets for single-user aerial system, including remotely powered and centralised systems, and single use and centralised satellite systems with feed-through current and signal for channel selection shielded connection clamps with captive screws Diam. 9.5 mm diam. - male connector - 1 module - 1 modulo - AXOLUTE as above - LIGHT as above - LIGHT TECH as above - LIVING my HOmE - CATALOGUE HD4269F HC4269F HS4269F F type TV coaxial connector impedance 75 Ohm screw connection - 1 module - AXOLUTE N4269F as above - LIGHT HD4269F HC4269F HS4269F NT4269F L4269F as above - LIGHT TECH as above - LIVING N4269F NT4269F L4269F tv + rd + sat JAcK connector HD4210D HC4210D HS4210D HD4210D HC4210D HS4210D Direct (shunted) coaxial sockets for single-user TV aerial systems, including remotely powered and centralised shunted systems, and single use and centralised shunted satellite systems with feedthrough current and signal for channel selection, and radio systems Male 9.5 mm diam. TV connector 9.5 mm diam. female radio and SAT connector for installation inside square box, item 503E, item 504E, item 506L N4210D NT4210D L4210D as above - LIGHT as above - LIGHT TECH as above - LIVING N4210D NT4210D L4210D 549

MY HOME - CATALOGUE STrUCTUrED CABLInG SySTEm FOr THE HOmE SECTOr TV connectors, multifunction sockets and accessories tv connector + shielded de-mixed sat HD4214D HC4214D HS4214D HD4214D HC4214D HS4214D N4214D direct (shunted) coaxial sockets for single-user HS4214D TV aerial systems, including remotely powered and centralised shunted systems, single use and centralised shunted satellite systems with feedthrough current and signal for channel selection Male 9.5 mm diam. TV connector F type SAT connector - 1 module - AXOLUTE as above - LIGHT NT4214D as above - LIGHT TECH L4214D as above - LIVING N4214D NT4214D L4214D tv plugs And sockets S2133 mobile TV jack and plug 9.5 mm diam. white for TV + SAT and L/N/NT4206D sockets S2133 S2157 S2157 mixer/de-mixer for TV+SAT systems with 3 connectors multipurpose connectors N4270 UTP cat. 5 with 4 pairs (22 26 AWG), 110IDC type. Connection for telephone, PC, 2 wire automation and door entry system. Width: 1 module - LIGHT NT4270 as above - LIGHT TECH N4270 NT4270 L4270 L4270 as above - LIVING patch cords Type Length (cm) L4668D/60 L4668D/30 RJ45-RJ45 30 L4668D/60 RJ45-RJ45 60 L4668T/30 RJ11-RJ11 30 L4668T/60 RJ11-RJ11 60 L4668TV/30 TV-TV 30 L4668TV/60 TV-TV 60 L4668BUS/35 BUS-BUS 35 L4668BUS/60 BUS-BUS 60 L4668TV/60 L4668BUS/35 various Accessories F400A DIN rail adapter for 3 multifunction connector 550 F400A L4668CM L4668CM cat. 5, 4 pair UTP unshielded cable, length 305 m, for use with multifunction connectors

DEVICES AnD COmmOn ACCESSOrIES Power supplies E46ADCN E47ADCN E47/12 power supplies E46ADCN power supply - 230 Vac input - 27 Vdc SELV output - maximum current absorbed: 450mA - Version for installation on DIN rail, size 8 modules, for flush mounted or wall mounted switchboards E47ADCN power supply as above - version for installation on DIN rail, size 8 modules, for wall mounted enclosures, item F115/8A for the connection of 1 back-up battery 12 V 7/12/24Ah E47/12 power supply - size 8 DIN modules, for wall mounted enclosures, item F115/8A - for the connection of 1 12 V 6.5 to 24 Ah battery for the powering of 12 V devices (IR barriers, etc) E49 mini power supply for automation system and temperature control - 230 Vac input - 27 Vdc output - maximum current absorbed: 600 ma - size 2 DIN modules. 346000 8 DIN modules system power supply - power supply: 230 Vac @ 50-60 Hz. Maximum current absorbed: 1.2 A. Electronically protected (without fuse) from short-circuit and overload. Double insulation SELV device 346020 mini additional power supply - 2 DIN modules for the power supply of video handsets, Web Server, and scenario programmer. Power supply: 230 Vac @ 50-60 Hz. Maximum current absorbed: 600 ma. Protected by built-in fuse (non-replaceable). Double insulation SELV device 346030 mini power supply 2 DIN modules for video door entry systems and basic sound systems with only one installable sound source. my HOmE - CATALOGUE E49 346000 346020 346030 For the selection of the power supply, depending on the system to install, refer to the following table. System Power supply E46ADCN E47ADCN E47/12 E49 346000 346030 Automation Burglar alarm (1) (2) (3) Energy management/cons. display Temperature control Sound system (4) Video door entry system NOTE (1): for systems with outdoor siren 4072L (2): for systems with outdoor siren 4072A (3): for systems with back-up battery 12 V 6.5-24 Ah 551

MY HOME - CATALOGUE DEVICES AnD COmmOn ACCESSOrIES Cables and various accessories L4669 L4669/500 L4669HF System 336904 L4669S Cable L4669HF L4669S 336904 L4669/500 Automation (1) Burglar alarm (1) Energy management/cons. display Temperature control Sound system Video door entry system NOTE (1): for systems with underground cable lines connection cables L4669 sheathed pair made up of 2 flexible conductors with braided and unshielded sheath - insulation 300/500 V - complies with standards CEI 46-5 and CEI 20-20 - Coil length: 100 metres L4669/500 as above - in 500 m coil L4669HF as above - low toxicity cable without halogens - ideal for applications in rooms where a higher degree of fire hazard safety is critical - Coil length: 200 m L4669S red SCS sheathed pair made up of 2 flexible conductors with braided and unshielded sheath for burglar alarm system - insulation 300/500V - complies with standards CEI 46-5 and CEI 20-20 - Coil length: 100 metres 336904 specific cable for 2 twisted conductors. It can be installed in underground piping, in accordance with CEI 20-13 and CEI 20-14 standards. It ensures the best performance in video systems (longer distance between EP and Handset when compared with other cables) - insulation 450/750 V. 200 metres coil 335919 3559 various Accessories 3515 spare plug-in terminals 335919 PC connection cable for the programming of the automation, burglar alarm, temperature control and sound system devices RS232 port version 3559 cable as above - for USB port 3515 F496/PR F496/MF home AutomAtion panel Accessories F496/PR shallow section for DIN 35 F496/MF clips for fastening on DIN 35 (10 pieces) F496/PF fastening plate on DIN 35 F496/FF fastening clamps (10 pieces) 552 F496/PF F496/FF

Configurators 3501/0 3501/1 3501/2 3501/3 3501/4 3501/5 3501/6 3501/7 3501/8 3501/9 3501/GEN 3501/GR 3501/AMB 3501/AUX 3501/ON 3501OFF 3501/OI 3501/PUL 3501/SLA 3501/CEN 3501/T 3501/TM configurators - one-type 10-piece set 3501/0 configurator 0 3501/1 configurator 1 3501/2 configurator 2 3501/3 configurator 3 3501/4 configurator 4 3501/5 configurator 5 3501/6 configurator 6 3501/7 configurator 7 3501/8 configurator 8 3501/9 configurator 9 3501/GEN configurator GEN 3501/GR configurator GR 3501/AMB configurator AMB 3501/AUX configurator AUX 3501/ON configurator ON 3501/OFF configurator OFF 3501/OI configurator OI 3501/PUL configurator PUL 3501/SLA configurator SLA 3501/CEN configurator CEN 3501/T configurator 3501/TM configurator M my HOmE - CATALOGUE configurator Kit 3501K Configurator kit from No. 0 to No. 9 3501K/1 Configurator kit AUX, GEN, GR, AMB,ON, OFF, O/I, PUL, SLA, CEN,, M 3501K 3501K/1 virtual configuration Kit 3503N kit for the configuration of the automation system using a hand-held PC and the VIRTUAL CONFIGURATOR software, supplied as standard, using the CD and the Secure Digit (SD) memory card 3503 553

MY HOME - CATALOGUE DEVICES AnD COmmOn ACCESSOrIES Device holding boxes F115/8A 502LPA F115/8B 502NPA wall mounted BoXes for power supply And BAttery - BurglAr AlArm system F115/8A F115/8B AngulAr BoX wall mounted DIN enclosure for the installation of the power supply item E47ADCN enclosure for 12V 7Ah battery, for the self-supply of the burglar alarm system with power supply item E47ADCN - self-protection contact against opening attempts surface mounted BoXes for modular devices 502LPA reduced depth wall mounted box - fitted with anti-tamper device - 2 modules - complete with support - LIVING 502NPA as above - LIGHT - LIGHT TECH with LB cover plate 502PA surface box for corner installation - fitted with anti-tamper device - 2 modules - complete with frame and white cover plate (LB) 502PA desk device-holder BoX 504LIV* desk device-holder box - 4 modules, LIVING, with support * also recommended for the installation of radio devices 504LIV 150432 150433 desk device-holder BoXes 150432 desk mounted device-holder box with civil series finishes. It can be desk mounted without screws, with the possibility of installing up to 4 boxes side by side. Alternatively, screws may be used for the installation side by side of an unlimited number of boxes. 4 LIVING modules 150433 as above 4 LIGHT modules 150434 as above 4 LIGHT TECH modules 150431 as above 4 MÀTIX modules 150434 150431 AdApters F80AL adapter for the installation of 2 LIVING or LIGHT modules on DIN 35 rail F400A as above - 3 modules 554 F80AL F400A

CONTENTS my HOmE Flatwall catalogue my HOmE - CATALOGUE 555

MY HOME - CATALOGUE FLATwALL Base, device-holder supports and accessories wall BAse module 3750 Base module for masonry walls consisting of: lower module back, telescopic module back, upper end cap, bracket with adjustable feet, duct fastener plate and masonry mesh 3751 module as above for plasterboard walls 3750 3751 device-holder supports And Accessories 3787 3801 3788 3802 3789 3787 device-holder support h30 cm, max. 36 DIN mod. 3788 device-holder support for free fixing of non DIN devices, or for fixing cables when used as a riser 3789 device-holder support h60 cm, max. 72 DIN mod. 3801 bracket for the installation of 1 or 2 MY HOME 506E modular devices 3802 bracket for the installation of 3 MY HOME 506E modular devices 3805 pair of brackets for non modular central units 3790 kit including a pair of trunkings and DIN rails for item 3788 3756 horizontal partition (optional) 3803 extension module. To be used as joining piece when crossing floors. Its use is compulsory in the riser solution 3804 vertical partition h 300 cm to separate cables in the riser solution. 3805 3790 3756 3803 3804 556

Finishing elements panels 3794 3791 3795 3792 3796 3793 3794 front cover panel h 120 cm for 1 506E modular device 3795 front cover panel h 120 cm for 2 506E modular devices 3796 front cover panel h 120 cm for 3 506E modular devices 3791 front cover panel h 30 cm for 1 506E modular device 3792 front cover panel h 30 cm for 2 506E modular devices 3793 front cover panel h 30 cm for 3 506E modular devices 3797* glass DIN switchboard h 30 cm 3798* metal sheet DIN switchboard h 30 cm 3799* plastic DIN switchboard h 30 cm 3757 front cover panel h 30 cm 3759 front cover panel h 60 cm 3785 front cover panel h 90 cm 3786 front cover panel h 120 cm 3771 upper and lower end caps 3761** front cover panel for non modular central units * Use white blanking modules, item F215FP, to close any free compartments ** Use white blanking modules, item 16133, to close any free compartments my HOmE - CATALOGUE 3797 3798 3799 3757 3759 3785 3786 3771 3761 profiles 3817 3818 3821 3822 3821 side finishing profiles h 270 cm 3822 side finishing profiles h 240 cm 3817 surround plate for AXOLUTE items 3818 surround plate for LIVING items 557

MY HOME - CATALOGUE FLATwALL Assembly guide: switchboard type solution Base setup: back Device-holder supports and accessories Supports for my HOmE devices Installable devices Installable devices Touch Screen item H4684 item L4684 3803 Extension module (compulsory for the riser solution) 3802 Bracket for the installation of 3 MY HOME 506E modular devices Burglar alarm central unit item HD/HC/HS4601 item HD/HC/HS4608 item L/N/NT4601 item L/N/NT4608 3787 Device-holder support h 30 cm, max. 36 DIN mod. 3756 Horizontal partition (optional) 3801 Bracket for the installation of 1 or 2 MY HOME 506E modular devices Video Display item 349311 (light) item 349312 (dark) Support for 506E item H4726 (AXOLUTE) 3789 Device-holder support h 60 cm, max. din 72 mod. Power supplies and other MY HOME DIN module devices DIN protection devices 3788 Device-holder support for free installation of non DIN modules 3790 Kit including a pair of trunkings and DIN rails for item 3778 (optional) 3750 Flush mounted back 3751 Flush mounted back for plasterboard (without masonry mesh) 3787 Device-holder support h 30 cm, max. 36 DIN mod. 3805 Brackets for non modular central unit support 3550 Temperature control central unit 3486 GSM burglar alarm central unit 558

Finishing elements: panels, end caps and surround plates *** Finishing elements: side surround plates 3794 Front cover panel h 120 cm for one 506E modular device 3795 Front cover panel h 120 cm for two 506E modular devices 3796 Front cover panel h 120 cm for three 506E modular devices 3817 Surround plates for AXOLUTE items my HOmE - CATALOGUE 3818 Surround plates for LIVING items 3791 Front cover panel as above h 30 cm 3792 Front cover panel as above h 30 cm 3793 Front cover panel as above h 30 cm 3797** DIN switchboard h 30 cm, glass 3798** DIN switchboard h 30 cm, metal sheet 3799** DIN switchboard h 30 cm, plastic Side surround plates 3821 h 270 cm 3822 h 240 cm 3757 Front cover panel h 30 cm 3759 Front cover panel h 60 cm 3785 Front cover panel h 90 cm 3786 Front cover panel h 120 cm 3771 Upper and lower end caps (to be fitted last) 3761 Front cover panel for non modular central units * * Use white blanking modules, item 16133, to close any free compartments ** Use white blanking modules, item E215FP1N, to close any internal free compartments *** Panels and upper and lower end caps must always be installed after the side surround plates (item 3821 or 3822) 559

MY HOME - CATALOGUE FLATwALL Assembly guide: electric distribution board solution Base setup: back Device-holder supports and accessories Installable devices 3803 Extension module (compulsory for the riser solution) 3787 Device-holder support h 30 cm, max. 36 DIN mod. 3756 Horizontal partition (optional) Power supplies and other MY HOME DIN module devices 3789 Device-holder support h 60 cm, max. DIN 72 MOD. 3788 Device-holder support for free installation of non DIN modules 3790 Kit including a pair of trunkings and DIN rails for item 3778 (optional) 3750 Flush mounted back 560 3751 Flush mounted back for plasterboard (without masonry mesh)

Finishing elements: panels and end caps *** Finishing elements: side surround plates my HOmE - CATALOGUE 3759 Front cover panel h 60 cm 3785 Front cover panel h 90 cm 3786 Front cover panel h 120 cm 3771 Upper and lower end caps (to be fitted last) Side surround plates 3821 h 270 cm 3822 h 240 cm *** Panels and upper and lower end caps must always be installed after the side surround plates (item 3821 or 3822). 561

MY HOME - CATALOGUE FLATwALL Assembly guide: floor riser solution Base setup: back Brackets and accessories 3803 Extension module (compulsory for the riser solution) 3788 Device-holder support for cable fixing 3804 Vertical partition h 300 cm 3790 Kit including a pair of trunkings and DIN rails for item 3778 (optional) 3750 Flush mounted back Floor slab 562 3751 Flush mounted back for plasterboard (without masonry mesh) Extension module Example of installation of the extension module, item 3803

Finishing elements: panels and end caps *** Finishing elements: side surround plates my HOmE - CATALOGUE 3759 Front cover panel h 60 cm 3785 Front cover panel h 90 cm 3786 Front cover panel h 120 cm 3771 Upper and lower end caps Side surround plates 3821 h 270 cm 3822 h 240 cm *** Panels and upper and lower end caps must always be installed after the side surround plates (item 3821 or 3822). 563

MY HOME - CATALOGUE Flatwall Examples of composition Composition with switchboard for protection devices h 270 cm Back modularity View of the whole unit MATERIAL LIST Quantity 3750 Flush mounted back 1 3789 Device-holder support h 60 cm 4 3786 Front cover panel h 120 cm 1 3785 Front cover panel h 90 cm 1 3797 DIN switchboard glass h 30 cm 1 3821 Pair of side surround plates h 270 cm 1 3771 Upper and lower end caps 1 Composition with switchboard for protection devices h 240 cm Back modularity View of the whole unit MATERIAL LIST Quantity 3750 Flush mounted back 1 3789 Device-holder support h 60 cm 3 3787 Device-holder support h 30 cm 1 3785 Front cover panel h 90 cm 2 3797 DIN switchboard metal sheet h 30 cm 1 3822 Pair of side surround plates h 240 cm 1 3771 Upper and lower end caps 1 564

Composition with switchboard for protection devices and my HOmE devices 3 + 3 modules, h 270 cm Back modularity View of the whole unit material list Quantity 3750 Flush mounted back 1 3789 Device-holder support h 60 cm 4 3801 Bracket for the installation of 1 or 2 MY HOME devices 1 3785 Front cover panel h 90 cm 1 3795 Front cover panel h 120 cm for 2 1 506E modular device 3797 DIN switchboard glass h 30 cm 1 3821 Pair of side surround plates h 270 cm 1 3771 Upper and lower end caps 1 3817 AXOLUTE surround plate 2 my HOmE - CATALOGUE Composition for riser column h 270 cm Back modularity View of the whole unit material list Quantity 3750 Flush mounted back 1 3788 Device-holder support for cable fixing 4 3786 Front cover panel h 120 cm 2 3821 Pair of side surround plates h 270 cm 1 3771 Upper and lower end caps 1 3803 Extension module 1 565

MY HOME - CATALOGUE FLATwALL Examples of composition design customisation Composition with switchboard for protection devices and non modular my HOmE devices - 270 cm Back modularity View of the whole unit material list Quantity 3750 Flush mounted back 1 3789 Device-holder support h 60 cm 3 3787 Device-holder support h 30cm 2 3805 Brackets for non modular central unit support 1 3761 Front cover panel for non modular central units 1 3785 Front cover panel h 90 cm 2 3797 DIN switchboard glass h 30 cm 1 3821 Pair of side surround plates h 270 cm 1 3771 Upper and lower end caps 1 design customisation To ensure maximum design integration with the room where it is installed, my HOmE FLATwALL front cover panels, supplied in their original white colour, may also be painted using the same paint as the walls. 566

Examples of front compositions for non modular central units and switchboard GSm burglar alarm central unit item 3486 and temperature control central unit item 3550 material list Quantity 3805 Pair of brackets for non modular central units 1 3761 Front cover panel for non modular central units 1 OK 1 OK 2 3 4 5 6 71 82 93 4 50 6 7 8 9 0 GSm burglar alarm central unit item 3486 material list Quantity 3805 Pair of brackets for non modular central units 1 3761 Front cover panel for non modular central units 1 16133 White blanking modules for closing a free compartment 2 my HOmE - CATALOGUE Switchboard for electrical protection devices material list Quantity 3797 DIN switchboard glass h 30 cm 1 F215FP White blanking modules for closing *** any free compartments *** Use 1 blanking module for each free DIN module 567

MY HOME - GLOSSARY Extended descriptions and operating modes of Automation devices with virtual configuration Extended configuration devices have 2 configuration levels: Functions Operating modes The functions identify what the device must do, while the operating modes identify how the device must operate to perform the preselected function. Below is a technical glossary explaining the terms used, to identify the functions and the modes. glossary OF FUNCTIONS SensorS Local lighting/presence detector Manages the presence of people and the lighting level. To be set when the sensor is not managed by the central unit. Local lighting sensor Manages the lighting level only. To be set when the sensor is not managed by the central unit. Local presence sensor Manages the presence of people only. To be set when the sensor is not managed by the central unit. Central lighting/presence detector Manages the presence of people and the lighting level. To be set when the sensor is managed by the central unit. Central lighting sensor Manages the lighting level only. To be set when the sensor is managed by the central unit. Central presence sensor Manages the presence of people only. To be set when the sensor is managed by the central unit. IR PLUS SCENARIO CONTROL Manages the recalling of scenarios set on the IR remote controls, item BMGE1001 and item BMGE1003. Actuators/Dimmers Light actuator ON/OFF management of the load connected. Dimmer Management of the load dimmer adjustment. Rolling shutter actuator Function for the management of the rolling shutter up/down movement. Curtain actuator Function for the management of the shutter opening/closure. Controls Double light control Management of the lighting system. Double rolling shutter control Function for the management of the rolling shutter up/down movement. Double CEN control Recalling of scenarios saved in the central unit item BMNE500. Addresses from 1 to 175. Double CEN PLUS control Like the CEN double control but with addresses extended from 1 to 2047. Double AUX control Management of auxiliary channels. Double disable control Mode for disabling the control functions. Double scenario control It cannot be managed using the Lighting Management system. Double PLUS scenario control Recalling of advanced scenarios stored in the devices (actuators, dimmers, room controllers). It does not use any address. It cannot be managed using the Lighting Management system. Double video door entry system control It cannot be managed using the Lighting Management system. Double sound system control It cannot be managed using the Lighting Management system. 568

operating mode glossary sensors Type of addressing In point-point mode the sensor manages a single load. Indicate the address of the load by entering the values in the menu on the right. In Group mode, it is possible to select the management of several loads belonging to different addresses. Main group It identifies a main group of sensors/ actuators/dimmers/room controllers to be managed. Reference address It indicates the address of the actuator/ dimmer of which the sensor must follow the status. Sensor group It identifies the secondary groups to which sensors/actuators/dimmers/ room controllers belong to, in addition to the main one to manage. Main group control Enabling/disabling of the main group management. Detection mode It identifies the technology to use for the detection (PIr/US). Load control In case of groups with several sensors, the master sensor is activated, which manages the load directly. The other sensors must be disabled, as they operate in Slave mode. PIR sensitivity This is used to set the number of beams emitted by the sensor during the detection process. US sensitivity This is used to set the number of waves emitted by the sensor during the detection process. Reference light Entering of the lux value that the sensor must maintain in the room. Hours/Minutes/Seconds The switch off time delay from the time a presence was detected. Control cycle Always closed. Initial presence It s used to set the detection mode of the initial presence. Re-trigger This functions switches the light back on in case of unwanted switching off due to a presence not being detected. Daylight factor It expresses the ration between the lighting produced by natural light on a plane inside the room, and the level of lighting produced on the plane itself from the unobstructed sky (max 255). Lighting adjustment To be set depending on the type of load management, On/OFF or Dimmer. Operating mode It identifies how the lighting system managed by the relevant sensor must operate. Preserve the presence It s used to set the presence preservation mode for the management of the lighting system. Alarm It identifies how the sensor can detect the imminent switching OFF of the lighting system. ActuAtors/dimmers Master standard mode On/OFF load management. Possibility of setting a time delay (240 sec. maximum) for the delayed switching OFF of the SLAVE actuator (if the case). Slave The device receives a control sent by the actuator with the same address identified as master. Master PUL Pulse mode On/OFF load management. It does not take into account room and General controls. Possibility of setting a time delay (240 sec. maximum) for the delayed switching OFF of the SLAVE actuator (if the case). Slave and PUL The device receives a control sent by the actuator with the same address identified as master. Pulse mode operation. Local pushbutton mode This functions offers the possibility of managing a load using the device pushbutton (cyclical On/OFF, On/OFF, Pushbutton, Timed On); when used for the management of rolling shutters, the following modes can be set: bistable and monostable. STOP time This function enables setting the final time after which the actuator is automatically disabled when in rolling shutter or curtain mode. Delay between the doors In curtain mode, this function enables setting a time delay (60 sec. maximum) before the rabbeted window starts opening or closing. controls Cyclical standard For point-point controls, in non-tilting mode, a short pressure of the control is used to performs the On/OFF function, while an extended pressure is used for the adjustment function For group, room, and general controls, it only performs the OFF function. ON timed The load managed switches OFF after a preset time, to be set in the corresponding item. Cyclical with adjustment The same as the cyclical standard, but the adjustment is possible for all controls, point-point, group, room, and general. my HOmE - GLOSSAry 569

MY HOME - GLOSSARY Extended descriptions and operating modes of Automation devices with virtual configuration OPERATING MODE GLOSSARY O/I with adjustment The same as standard I/O, but the adjustments are also possible with group, room and general controls. Cyclical without adjustment It only performs ON/OFF, for all point-point, group, room, and general controls. O/I without adjustment For controls, in tilting mode, it performs the ON functions when the upper key is pressed, and the OFF function when the lower key is pressed. Standard O/I For point-point controls, in tilting mode, when the upper key is pressed, with a short pressure it performs the ON function, and with an extended pressure the adjustment function; when the lower key is pressed, with a short pressure it performs the OFF function, and with an extended pressure the adjustment function. For group, room, and general controls it only performs the ON/OFF function. OFF The device only sends OFF controls to the load. ON The device only sends ON controls to the load. PULL The device operates as a pushbutton. Flashing The device sends a flashing command to the load. The time indicates the flashing speed. Extended cyclical standard adjustment As for cyclical standard mode, but the soft start/stop, dimming, and switching on level can also be set. Extended standard O/I adjustment As for standard I/O mode, but the soft start/stop, dimming, and switching on level can also be set. Extended cyclical adjustment As for cyclical mode with adjustment, but the soft start/stop time, dimming time, and switching on level can also be set. Extended adjustment with O/I As for I/O mode with adjustment, but the soft start/stop time, dimming time, and switching on level can also be set. Extended non-cyclical adjustment As for cyclical mode without adjustment, but the soft start/stop time, dimming time, and switching on level can also be set. Extended adjustment without O/I As for I/O mode without adjustment, but the soft start/stop time, dimming time, and switching on level can also be set. Monostable control In rolling shutter mode the duration of the command corresponds to the time the key is pressed. Bistable Control In rolling shutter mode, with the simple pressure of the control, the motor connected stays ON until the end of the stroke. Dimmer level It defines the percentage value of the power on the load. 570