Safe Health Guarder User Manual

Transcription

1 Safe Health Guarder User Manual

2 Contents Tips: Please read through this user manual before installation so as to operate properly. Please keep well of the user manual for further reference. For properly operation, please get around understanding of this manual. Foreword Features 1. Content of Package 1.1 Kit A 1.2 Kit B Kit C Kit D Preparation before using 3.Adding users on App 4.Introduction of APP Introduction of Control Panel and sensors Control Panel: Front Control Panel:Back Insert SIM card Turn ON System Download App and Installation Adding users Adding Master Adding sub-users Emergency Call Interface Main Interface Control Panel Management Interface Setting Interface Changing Languages Modifying Time Adding Wireless Sensors Setting SMS and phone call numbers Modifying Master Password for Control Panel Modifying Installation Place Changing More Settings Setup Home Stay Zone Change Zone Name How To Distinguish Detector Status How To Check Alarm Message Handling APP Alarm Message and Precautions Phone Call Alarm Handling

3 5.Introduction of Sensors 5.1 PIR Motion Sensors Door/Window Sensor Remote Controllers Medical Panic Button Emergency Panic Button Water Leakage Detector Smoke Detector Gas Leakage Detector IP Camera Control Alarm Panel though APP 6.1 Control Alarm Panel ARM/DISARM/STAY ARM How to Add IP Camera and How to Control Installation Precautions Foreword Dear users: Thanks for selecting Vcare WiFi GSM securiy system. The system adapts WiFi and GSM dual network to transmit alarm message. It pushes the alarm message to users' smart phone App when alarming. Meanwhile, it s able to send SMS and make phone calls. By using dual network, it is more stable, safer and faster. Also users could remotely control the alarm panel and open IP camera monitoring on site. For more conveniently using, please following the steps on this user manual. Please feel free to contact us if you had met any questions or problems while using, we are much please to be on your service. Features Adapting WiFi & GSM network, enable to be controlled by ios and Android APP. Support 1 master user,99 sub-users. Adding sensors by scanning QR code. Support 4 HD IP cameras, live video communication. 24 hours monitoring temperature and humidity, enable to preset alarm value. Auto detect WiFi & GSM signal status. 24 hours detecting doors/windows closed or not. Low battery alert for sensors, auto detect whether sensors connected alarm panel or not. Monitoring AC power, failure or recovery status. All the operation logs can be checked on Vcare App. One-key SOS alarm on App, auto record 6 seconds video and push the location map to inform family members. Siren prompt and SMS prompt when arm/disarm by remote controller. Setup siren alert time(0~254 seconds for optional). Delay alarm/arm/disarm functions(0~60 seconds for optional). Six languages and voice prompt(english,russian,german,spanish,french and Chinese). Support 99 normal sensors, 20 remote controls,8 fire alarm sensors,8 panic buttons,8 emergency buttons,4 water leakage detectors,2 wired zones. Support wireless strobe siren and 2 routes home appliance control switch. GSM Mode: When WiFi network failure,auto switch to GSM network. 3 SMS alarm numbers and 3 alarm call numbers. Support two-way communication, arm or disarm on phone keypad. Recorded voice for 10 seconds. 1

4 1. Package list 1.1 Kit A 1.3 Kit C SOS Alarm panel*1 PIR detector*1 Door sensor*1 Remote controller*2 Medical button*1 SOS Others: Alarm panel*1 Door sensor*1 Medical button*1 PIR detector*1 Remote controller*2 Emergency Panic button*1 Power adapter*1,alarm panel mounting bracket*1,pir mounting bracket*1 door sensor double-sided adhesive*1,user manual*1. Notice: The version is dual network WiFi and GSM. 1.2 Kit B HD IP Camera *1 Smoke Detector*1 Gas Leakage Detector*1 Water Leakage Detector*1 Others: Power adapter*2 Alarm panel mounting bracket*1 PIR mounting bracket*1 IP Camera mounting bracket*1 Door sensor double-sided adhesive*1 Alarm panel*1 PIR detector*1 Door sensor*1 SOS Remote controller*2 Medical button*1 Net cable*1 User manual*1 1 Notice:This kit is WIFI & GSM network version. SOS HD IP Camera *1 SOS Button*1 Alarm panel*1 PIR detector*1 Door sensor*1 Remote controller*2 Medical button*1 Other accessories: Power adapter*2, panel mounting bracket*1, PIR sensor mounting bracket*1, IP camera mounting bracket*1 Door sensor double-sided adhesive*1 Net cable*1 User manual*1 Others: Power adapter*1 Alarm panel mounting bracket*1 PIR mounting bracket*1 Door sensor double-sided adhesive*1 User manual*1 Notice:This kit is GSM network version. Notice:This kit is WIFI & GSM network version. 2 3

5 2.Preparation before using 2.1 Alarm Panel and Sensors Control Panel:Front 2.2 Insert SIM Card This system is WiFi & GSM intelligent security system, Once alarm occurs, the host will push alarm message to the users via WiFi. If the WiFi network failure, the alarm panel will automatically switch to the GSM network,sending SMS and making calls to alert users for alarm. Hence, we recommended you to insert SIM card inside. 1.Select the appropriate SIM card. 2.SIM card is inserted into the host's SIM port. Alarm Indicator(Red) Wifi Signal(Blue) Arm Indicator(Red) Control Panel:Back Record MIC Tamper Switch Accessories wireless signal indicator GSM signal indicator Power Indicator Record button Listen in MIC Siren(80db) SIM Socket Wired Zone terminal Temperature and humidity sensor probe terminal WiFi Configuration Button 2.3 Plug Power & Turn ON System 1.Plug power adapter output into main panel power socket. 2. Push power switch from OFF to ON to turn on system. Power Port Power Port Power Switch Speaker Power Switch 4 5

6 3. Adding Users Via APP 5. Make sure the WiFi network with which you want to connect Vcare Smart Home Security System and the Wifi network your current mobile 3.1 APP Download and Installation phone connecting are in the same WiFi router, if Scan the following two-dimensional code (QR code), Download APP according to your true,please click "Yes" mobile system (IOS or Android System) and install it. 6. If not, please click the settings", then choose the correct WiFi network, reconnect WiFi network to make sure they are in the same Wifi router, then click "Yes" 4. Click "Admin User" 7. Input WiFi password. 8. Press the "Wifi Setting" button on the QR Code back of the Vcare Smart Home Security System. 9. After heard "beep" sound from the host, click Settings configuration on 3.2 Add Users APP, you can see the progress bar of the configuration. Add Vcare App to your mobile, it allows 1 master user, 99 sub users First, Add 1 user as master user, please follow the following steps. 1. Click to open installed Vcare APP on your mobile 3. On the main interface, click "Devices" 2.After welcome interface, entry the emergency call 10. Input Vcare's "6 Digit Password", and 11. Make a personalized name as you then click OK (Note: Default password is like for Vcare and click Finish. 12. Well Done. "123456"). interface, click the interface on the right, get into the main interface. 6 7

7 3.2.2 Add sub users, please refer to the following pictures step by step. (Note: It can add up to 99 sub 4. Introduction of APP Interface Features. users, the sub-user can not set the parameters of the host, but the other functions are same as admin 4.1 Emergency Call Interface user.) Weather forecast. Daily update the real-time weather. SOS emergency call function, quite suitable for the elderly and children. When he/she feel not well or get lost, click on the "SOS" button, Vcare APP wil immediately record a small video, and push GPS location info to all members of this Vcare. 3 latest message scrolling listed. 2. Click "Members". 1.Click Admin User into 3.Click "Invite" Management interface. 4.2 Main Interface Weather forecast. Daily update the real-time weather. All the added Vcare devices will be listed in a good order. Each device will display name, using time, ambient temperature and humidity and installation address. Check all the event records of the host. Also displays the current arm/disarm status and whether there are contents unreviewed. 5. Open your family member s phone, 6. After entering adding users family members you want to add then enter the main interface, click interface, click on the "Users". them in Vcare. "Devices" 4. Send invite code by SMS to the You can also click on the settings icon for settings. 4.3 Admin Management Interface 7. Input received invitation code. 8. Input your phone number. 9. Input your user name, for example Jason Return to previous interface Enter into setting interface WiFi connecting status Temperature / humidity data 10. Click "Acception". host arm/disarm status GSM network status 11. Complete, Click "Finish". 8 Anyone at home (Y/N) Validity period Backup battery status Power connecting status 9

8 Door Sensor Door/Window Open /Closed Door/Window Closed Door/Window Sensor disconnect Somebody IN PIR Detector Disconnected PIR Detector Low Battery Smoke Alert Smoke Detector Disconnected Low Battery Alert PIR Motion Sensor Detector Door Sensor Low Battery Click into members management interface Click into Emergency Call Interface Click into alarm records interface Delete All unread alarm records 4.4 Setting Interface Smoke Detector Modify Languages Modify Time Water Leakage Detector Adding Detectors Water Leakage Water leakage Alert Detector Disconnected Setting mobile phone number for SMS and phone call Low Battery Alert Modify Admin Password Modify Installation Place Gas Detector More Settings Gas Leakage Alert Gas Detector Disconnected Emergency Panic Button Emergency Panic Emergency Call Alert Button Disconnected Modify languages: Support Chinese, English, Russian, French, German, Spanish. After Medical Call Button modified, pushing message will use that language; (Note: Command according to APP prompts) Medical Call Alert Medical Call Button Disconnected 4.4.2Modify System Time: Recommend users reset time for new host. (Note: Command according to APP prompts) More Detectors Adding Wireless Accessories: You can add all kinds of intrusion detectors and emergency Detectors Alert Detectors Disconnected Detectors Low Battery detectors, for details refer to the following description. Patrol Hawk Eye Add remote controllers, up to 20pcs Add emergency panic buttons, up to 8pcs Add door/window detectors, PIR sensors, up to 99pcs. Smart Control Add gas/smoke detector, up to 8pcs Add medical call buttons, up to 8pcs. Add water leakage detector, up to 4pcs. Add intercom, up to 4pcs. Intercom How to add sensors, please follow the following examples. Health Monitoring 1. Click "Wireless sensors" 2. Adding wireless sensors interface into adding sensors interface 10 11

9 Example: Add and delete door/window sensor Modify admin management password.(note: please refer to step 4.4. Command according to App prompts) Modify Installation place. (Note: please refer to step 4.4. Command according to App prompts) More settings Items Function WiFi network breakdown alert If wifi network breakdown, host will push alert message GSM network breakdown alert If GSM network breakdown, App will push alert message 1.Click into adding interface 2. Click the corresponding number to set 3. Scan QR code on the back of the sensors. Door/window not closed alert When in armed status, if door/window not closed, App will push alert message Click to delete all detectors Click here to delete sensors one by one Accessories low battery alert Power breakdown alarm Arm/disarm SMS alert If accessories in low battery, APP will push alert message. If power breakdown or out of power, App will push alert message. When arm or disarm the panel, whether need SMS alert Input personalise name for easily recognition Siren prompt when arm/disarm by remote controllers When arm or disarm by remote controllers, whether need siren prompt. 6.All the accessories are added by scan QR code, simple and easy. Internal siren volume Delay Arm Time Internal siren volume can be adjusted, High/Medium/Low for optional. Delay arm time could be chose from 00~99 seconds, default is 30seconds. 4. Click confirm, App will automatically recognize the door sensor 5. Adding successfully Delay Alarm Time Delay Disarm Time Delay alarm time could be chose from 00~99 seconds, default is 00seconds. Delay disarm time could be chose from 00~99 seconds, default is 00seconds Set phone number for SMS message and phone call. (Note: this function are special for GSM edition. While wifi network not working, it will automatically interchange to GSM network) Siren Alert Time Timing Arm Siren alert time could be chose from silent/00~254s/keep alerting.default is 90s. Timing arm time could be set. Three set time for choice Timing Disarm Delay disarm time could be chose from 00~99 seconds, default is 30seconds. Timing Stay Arm Timing stay arm (home mode) time could be set. Three set time for choice NC/NO Alarm for Wired Zones Wired zone alarm mode:nc or NO. Default is NC. GSM Network Alarm GSM Alarm function could be chose from Closed/Open/Auto Change. Temperature Alarm Temperature alarm can be set from Closed or 000~120degrees. Default is 85degrees. 1. Click into SMS and phone call numbers setting interface. 2. Click to set numbers. Could set 3 SMS and 2 phone call numbers. 3. After setting phone numbers, click confirm to finish settings. Someone at Home Alert Could set somebody at home alert, default is closed

10 4.4.8 Set stay arm zones Check Alarm Records Note: All new added sensors are in stay arm zone. The following step can cancel stay arm zone function. 2 Red Icon: Unread Alarm Records Grey Icon: NO Alarm Records As pictures shows: There are two unread water leakage alarm message. 2 2 Click here could check all hosts alarm records 4 1. Click into related sensors management 2. In pop up window, push switch interface, click stay arm icon. to OFF status and confirm. 3. After settings, the sensors are not in stay arm status now. When panel in stay arm status, the sensors will not trigger to alarm Modify Zone Name 1. Click related host to get into users 2.Click related icons to check alarm messages. management interface. Click Delete Alarm to delete all the red bubbles APP Alarm Handling and Some Notices 1. Intrusion detectors (Door Sensor/ PIR motion sensor/ More detectors) only could be triggered to alarm when host is in ARM status. Other types detectors (SOS emergency panic button / medical call button / fire detector) can directly trigger to alarm without host in ARM status.. 2. In Stay ARM status, the switch of intrusion detectors needs to turn on so that could be triggered to alarm.(default for newly added detectors are stay arm detectors, user can modify the zone types, details please refer Step ). 3. If sensors had been triggered to alarm, there will be a red spot on sensors pictures in the sensors management interface. Other types such as (operating record/power failure/ temper switch) alarm message will appear in Alarm Records, with a red spot there. After checked, the red spot will disappear. Or click Delete Alarm Message to delete all red spot. 4.Different type of Alarm, APP will push different alarm music to inform users. 1. Click into sensors management 2. In pop up window, input new name, interface, chose zone name. for example, Front Door Alarm 3. Modified successfully. 5. If turn on when GSM network breakdown, APP push message alert function, when the host detect there is GSM network, APP will push message to alert all the users. 6.If turn on When Wifi network breakdown, auto change to GSM network function, when there is wifi network, Check Sensors/Detectors Status Host will send SMS to the preset 3 SMS numbers inform about it. 7. When those sensors such as door/window sensor, PIR detector, Gas detector, water detector, gas detector are disconnected with alarm host, APP will push alert message (without SMS alert message), and in sensors Gate Detector 001 Front Door Alarm Detector 003 management interface the sensors color will be in grey. Detector 004 Door sensor disconnected Door Open 8.When those sensors such as door/window sensor, PIR detector, Gas detector, water detector, gas detector are in low battery, the APP will push low battery alert message every two hours. ( This function could be turn off), also in sensors management interface there will be low battery icon listed. 9. Door sensor closed/open status could be checked and if door had not been closed when host armed, APP will Door Closed 1. Click into sensors management Door Sensor Low Battery push alert message, also in sensors management interface there will be door open/closed status icon listed. 2.Door sensor management interface interface, chose zone name

11 Phone Call Alarm Handling 5.3 Remote Controllers 1. When turn on GSM network (with GSM sim card insert), once alarm, APP will push alarm message also alarm host will send SMS and make phone call to preset mobile numbers. If turn off GSM network, once alarm only APP push alarm message. If chose auto change to GSM network, only when wifi netowok failure, alarm host will send SMS and make phone call to preset phone numbers. 2.When using GSM network, alarm host will send SMS first and then make phone call to preset Signal Indicator Disarm Arm Stay Arm Usage: 1.Press each button, the alarm host will give related response. mobile numbers. If someone answer it, the call will stop, play the record and read the alarm message also get into listen in status. At this time, if press 1 on mobile keypad, host will be in armed status, Panic Button SOS press 2", host in disarmed status, press 3" to start siren, press 4 closed siren prompt. If the call is 5. Accessories 5.4 SOS Emergency Call Button 5.1 PIR Motion Sensor Lanyard Alarm Indicator Lens Installation: 1.Open shell, remove insulation pads. 2.Mounting on the wall, with height at 2.20meters. 3.In case of false alarm, avoid close to vents. Usage: 1.Push lanyard to trigger alarm. 2.Press button to trigger alarm. Buckle Button 5.5 Panic Button 5.2 Door/Window Sensor Alarm Indicator Installation: 1. Open shell, remove insulation pads. 2.Paste on window/door 3.Magnet move away from subject 2cm will trigger to alarm. Button Usage: 1.Fixed installation or place it where you can touch. 2.Press button to trigger alarm. Object Magnet 16 17

12 5.6 Water leakage detector 5.9 HD IP Camera Photosensitive sensors wall wall WiFi antenna HD Camera IR Light Testing button buzzer Alarm indicator Sensor ground installation ground LAN Socket Siren Socket WPS button Power socket MIC Socket TF card socket Usage: 1. Open shell, remove insulation pads. 2.when installed, metal area should close to ground 5.7 Smoke detector Installation: 1.For detailed steps, please refer to the user manual.. 2.Mounting on wall or ceiling or place on the stable is OK. 3.Supporup to 32G TF card. Testing button Alarm indicator Usage: 1.Open back shell, install battery 2.Install on ceiling. 3.Install it where fire easily take place 6. APP Interface Buzzer 6.1 Arm/Disarm/Stay Arm 5.8 Gas leakage detector ARM: When host armed, once sensors had been triggered will alarm. Power line Stay Arm: When host stay armed, only those sensors set in stay armed had been triggered, host will alarm. Usage: 1.Mounting on the wall, plug in power adapter. 2.Install it where gas leakage easily take place. buzzer Disarmed: When disarmed, the intruder type sensors will not alarm, only panic and smoke detector had been triggered, host will alarm. Power indicator 1. Click Arm Status, get into 2. Arm/Disarm management Start Siren: Press this button to start siren. Alarm indicator Arm/Disarm management interface. interface. Stop siren: Press this button, the siren will Breakdown indicator Testing button stop alarming

13 6.2 How to add IP camera and how to command 7. Cautions 1. Click into host management 2. In IP camera management interface, click Patrol Hawk Eye get interface, click to add new IP camera. into IP camera management interface. Default password : admin 3. In pop up window, click "Scan QR code)" 1.Keep away from water. 2.Install host in hidden place with good Wifi and GSM singal. 3.Turn Off host when insert/take out the SIM card. 4.Connect power adapter well and keep good heat dissipation. 5.Enter into normal running status about 12 seconds later. 6.Check all the detectors batteries in time and charges them when power is low. 7.Donot install alarm host close to the objects with strong interference, such as TV, computer etc. 8.Regularly check the SIM card in the alarm host( Check GSM signal, balance, etc.) 9.Inspect the alarm systems operation regularly. 10. Design for indoor use rather than outdoor. 4. Scan QR code on the back of IP camera 5. Automatically get number for camera, input password and name then confirm. 6. Adding successfully. Can add up to 4pcs IP camera. Click IP camera icon get into monitoring online. Note: Move to different directions to monitor. Horizontal 355degrees,vertical 90degrees. Shot pictures Watch shot pictures Silent Listen in Two way communication. 7. Monitoring interface 20 21