Hills wireless security alarm DIY range

Transcription

1 Hills wireless security alarm DIY range EASY TO INSTALL DIY system PEACE OF MIND Receive SMS/calls when alarm is armed INTERACTIVE Arm and disarm by SMS or via smartphone app Control your alarm via smart phone app and receive SMS notifications Control your alarm via smart phone app and receive sms notifications 2G/3G alarm panel kit motion pet immune motion door & window motion Remote control RFID tag TRUSTED TECHNOLOGY

2 security alarm DIY starter kit Hills wireless security alarm DIY starter kit is a self-monitoring alarm system that works on a 3G/2G mobile network. Key features include easy DIY installation and setup, as the s wirelessly communicate to the panel. Arm, disarm and configure the panel by SMS or via smart phone App. The energy efficient s operate on batteries for up to 1 year and the panel has a secure built-in siren and backup lithium batteries which last up to 8 hours. Plus you can add up to 50 s to your panel to secure your home. THREE EASY STEPS TO INSTALL Insert SIM card into the alarm panel and install alarm panel in desired location* Register s with alarm panel and install s in desired location Download App and setup your personal alarm settings *SIM card not included Item code: S6317A DC 12V/500 ma (2 x 800mAh backup batteries included) 2G & 3G frequency: 2G 850/900/1800/1900MHz 3G 850/2100MHz 433 MHz (±75 KHz) Control your alarm via smart phone app and receive SMS notifications Colour: Alarm panel, motion, door/window White Remote control, RFID tag Black Installation requirements: Mounting bracket and screws provided. Batteries included, SIM card not included 1x 2G/3G alarm panel User friendly interface. *SIM card not included 1x motion Detects movements in your home. *Batteries included 1x door/window Detects when door or window is open. *Batteries included 2x Remote control Arm, disarm and trigger the alarm. *Batteries included 2x RFID tag Disarming your alarm has never been easier. 2x Security warning stickers Security warning stickers to deter intruders. SECURE Built-in siren and backup lithium battery (up to 8 hours in standby mode). FLEXIBLE Create different zones with different s. Supports up to 50 additional wireless accessories. CONTROL Stores up to 5 phone numbers to SMS/call for all alarm events and notifications. EASY TO INSTALL DIY alarm panel and accessories are easy to set up and use. PEACE OF MIND Receive SMS/Call when alarm is armed or disarmed via keypad, remote control or RFID tag. INTERACTIVE Arm and disarm alarm by SMS or phone call or via smartphone app.

3 Hills DIY wireless security App To make using your Hills wireless security alarm even easier, remote access control of your alarm and configuration of its settings may be performed from your smartphone using the Hills DIY Security App. This App is available from the App Stores below. To install the App, use your device to search for Hills DIY Security App and tap GET. Enter your store password when prompted and the App will be installed to your home screen. Once the App is installed, tap the App icon to start the App. You will be guided through registering an account for yourself and connecting to your alarm system. Once your App is installed, you can use it to arm and disarm your alarm remotely and change your alarm settings, such as naming your zones and RFID tags, setting delay times and the siren volume and ringing time.

4 motion The Hills wireless motion is a high performance wireless PIR motion detector. It features a digital dual-core fuzzy logic infrared control chip and intelligent analysis, which identifies interference signals from movements. With automatic temperature compensation and anti-air turbulence technology, it easily adapts to environmental changes. The detector also has the advantages of energy saving, reliability and easy installation. Hills wireless motion comes in a single pack and four packs. Item codes: 1 Pack: S6318A 4 Pack: S6319A Detection Scope DC 3V, AA 1.5V LR6 Battery x 2 pcs (batteries included) Transmitting distance: 80m (in open area) 110 0m 2m 0m 2m 4m 6m 8m 433MHz (± 75KHz) Ground Side view Detection scope: 8m/110º Operational condition temperature: -10 C ~ 55ºC Top View Side View 2m Relative humidity: 80% (non-condensing) Ground Easy to install Energy efficient

5 pet immune motion The Hills wireless pet immune motion is a high performance, wireless pet immunity PIR motion, suitable for pets less than 25kgs. It features a digital dual-core fuzzy logic infrared control chip, and intelligent analysis which effectively identifies interference signals from movements and reduces false alarms. With automatic temperature compensation and anti-air turbulence technology, it easily adapts to environmental changes. The also has the added advantages of energy saving, reliability and easy installation. Item code: 1 Pack: S6322A DC 3V, AA 1.5V LR6 Battery x 2 pcs (batteries included) Transmitting distance: 80m (in open area) 433MHz (± 75KHz) Detection scope: 8m/110º Pet immunity: 25 kgs Operational condition temperature: -10 C ~ 55ºC Relative humidity: 80% (non-condensing) Pet immune Easy to install Energy efficient

6 door & window The Hills wireless door & window can be installed on doors, windows, or any other objects that open and close. The transmits a signal to the alarm panel when a magnet mounted near the is moved away. The tamper protection ensures that any attempt to move the contact will result in alarm activation. Hills wireless door & window comes in a single pack and two packs. Item codes: 1 Pack: S6320A 2 Pack: S6321A DC 12V, A23 Battery x 1 (batteries included) Transmitting distance: 80m (in open area) 433MHz (± 75KHz) Housing material: ABS plastic Operational condition temperature: -10ºC ~ 55ºC Relative humidity: 80% (non-condensing) Easy to install Energy efficient