Incremental 30-45 hollow shaft Rugged mechanical design Unbreakable disc Integrated diagnostic system Wide voltage range DC 5-30 V Isolated shaft NUMBER OF PULSES 1024 / 2048 / 2500 / 4096 / 5000 / 10000 Other number of pulses on request GENERAL INFORMATION The central element of the RI80-E is the latest Hengstler OptoAsic technology, which offers the following key benefits: Highest EMC iunity Outstanding reliability by reduced number of components and integrated diagnostics system Aging compensation by integrated LED light regulation Integrated monitoring of pollution, disk damage, LED lifetime, temperature A robust and generously dimensioned mechanical design ensures long maintenance free operation. The RI80-E is ideally suited for applications like: Geared Elevators Asynchronous Motors Industrial Machinery TECHNICAL DATA mechanical Housing diameter Shaft diameter Flange (Mounting of housing) Mounting of shaft Protection class shaft input (EN 60529) Protection class housing (EN 60529) Axial endplay of mounting shaft (hubshaft) Radial runout of mating shaft (hubshaft) Max. speed 100 30 / 45 (Through hollow shaft) Tether Keyway, Set screw IP50 or IP64 IP50 or IP64 ± 0.5 ± 0.05 IP50: max. 3600 rpm IP64: max. 1500 rpm Operating temperature -25 C... +85 C Storage temperature -40 C... +70 C Material shaft Aluminum, ceramic coating Material housing Aluminum / glass fiber-reinforced plastic Weight 670 g Connection Sub-D connector Cable, radial E-mail: info@hengstler.com Internet: www.hengstler.com 1
TECHNICAL DATA electrical General design as per DIN EN 61010-1, protection class III, contamination level 2, overvoltage class II Supply voltage 1 DC 5 V ±10 % or DC 5-30 V Max. current w/o load 60 ma (DC 5 V), 60 ma (DC 10 V), 35 ma (DC 24 V) Max. pulse frequency RS422: 600 khz Push-pull: 200 khz Standard output versions Pulse width error Number of pulses Alarm output Pulse shape Pulse duty factor 1:1 1 Pole protection with supply voltage DC 5-30 V RS422 (R): A, B, N, A, B, N, Alarm, Sense Push-pull (K): A, B, N, Alarm Push-pull complementary (I): A, B, N, A, B, N, Alarm ± max. 25 electrical 1024, 2048, 2500, 4096, 5000, 10 000, (other number of pulses on request) NPN-O.C., max. 5 ma Square wave ELECTRICAL CONNECTIONS Cable TPE Color RS422 + Alarm + Sense (R) Push-pull (K) Push-pull Complement. (I) brown Channel A Channel A Channel A green Channel A Channel A gray Channel B Channel B Channel B pink Channel B Channel B red Channel N Channel N Channel N black Channel N Channel N violet Alarm Alarm Alarm white Sense GND Sense GND blue Sense V cc Sense V cc brown/green DC 5-30 V DC 5-30 V DC 5-30 V white/green GND GND GND screen 1 screen 1 screen 1 screen 1 1 connected with encoder housing E-mail: info@hengstler.com Internet: www.hengstler.com 2
ELECTRICAL CONNECTIONS Sub-D connector,15 pole/ 9 pole Pin Signal 15 pole Signal 9 pole 1 B GND 2 B +Ub 3 A A 4 A B 5 GND N 6 +Ub A 7 n.c. B 8 screen N 9 N 10 N 11 n.c. 12 n.c. 13 n.c. 14 n.c. 15 n.c. DIMENSIONED DRAWINGS Set screw <1> M4 (depth 6) <2> M4 (2 x 90 ) Dimensions in E-mail: info@hengstler.com Internet: www.hengstler.com 3
DIMENSIONED DRAWINGS (continued) Keyway <1> Connector SUB-D 15 pole <2> M4 (depth 6) Dimensions in E-mail: info@hengstler.com Internet: www.hengstler.com 4
ORDERING INFORMATION Type Number of pulses 2 Spring tether Supply voltage Protection Shaft Output 1 Connection RI80-E 1024 2048 2500 4096 10000 5000 A DC 5 V B DC 5-30 V O Without tether A Spring tether single B Spring tether double C RI76 compatible (A) 0 IP40 1 IP50 4 IP64 G30 Set screw / 30 G38 Set screw / 38 G40 Set screw / 40 G45 Set screw / 45 K30 Keyway / 30 1" isololated on request R RS422 +Alarm +Sense K HTL I HTL complementary F E-I TPE cable, radial M23 connector (Conin) at 1 m TPE cable, cw E-D M23 connector (Conin) at 1 m TPE cable, ccw 3 Sub-D connector, 9 pole 4 Sub-D connector, 15 pole 1 Output code "K" and "I": Driver type DL, see < www.ichaus.de > 2 Other number of pulses on request ORDERING INFORMATION Selection of cable length Versions with cable outlet (connection A, B, E or F) are available with various lengths of cable. To order your desired cable length, please add the respective code to the end of your ordering code. Further cable lengths on request. Code Cable length without code 1.5 m -D0 3 m -F0 5 m -K0 10 m -P0 15 m -U0 20 m -V0 25 m E-mail: info@hengstler.com Internet: www.hengstler.com 5
Accessories CONNECTING CABLES Connecting cables with plug (socket) on one end Ordering code C/D/-I, 3 m C/D/-I, 5 m C/D/-I, 10 m C/D/-I, 15 m C/D/-I, 20 m C/D/-I, 25 m C/D/-I, 30 m C/D/-I, 40 m C/D/-I, 50 m G/H/-D/-H, 3 m G/H/-D/-H, 5 m G/H/-D/-H, 10 m G/H/-D/-H, 15 m G/H/-D/-H, 20 m G/H/-D/-H, 25 m G/H/-D/-H, 30 m G/H/-D/-H, 40 m 1 522 348 1 522 349 1 522 350 1 522 454 1 522 456 1 522 457 1 522 464 1 522 643 1 522 793 1 522 394 1 522 395 1 522 396 1 522 447 1 522 461 1 522 462 1 522 463 1 522 463 CONNECTING CABLES Cable not made up with connectors Ordering code TPE cable, 12-core + screen 3 280 112 + length E-mail: info@hengstler.com Internet: www.hengstler.com 6