SENSORS. Fiber Optic Sensors - S70. Advanced fiber optic amplifiers for high speed and low contrast applications

Transcription

1 Fiber Optic Sensors - S7 Advanced fiber optic amplifiers for high speed and low contrast applications DIN rail mountable models with dual digital displays speed models: 2 μs...5 ms Super high speed models: μs...ms Teach-in setting via +/SET/- push-button/switch, remote input or IO-Link 2 m cable or M8 4-pole connection SENSORS APPLICATIONS -Processing and Packaging machinery -Electronics assembling -Pharmaceutical industry S7 Response time Super high speed: μs (S7...E2) speed: 2 μs (S7...E), 5 μs (S7...E2) : 5 μs (S7...E2) : 5 μs (S7...E), 25 μs (S7...E2) range: 5 μs (S7...E2) range: 2 ms (S7...E), ms (S7...E2) Extra long range: 5 ms (S7...E) Vdc 3 V, 8 3 V (IO-Link mod.) Power supply Vac Vac/dc PNP NPN Output NPN/PNP relay other IO-Link cable Connection connector pig-tail Approximate dimensions x79x3.5 Housing material ABS and polycarbonate Mechanical protection IP5, NEMA

2 Fiber Optic Sensors - S7 TECHNICAL DATA Power supply Ripple Consumption (output current excluded) Light emission Setting Indicators Output Output current Saturation voltage Response time Switching frequency 3 Vdc (reverse polarity protection) 8 3 Vdc (IO-Link mod. S7 PZ) % max. 4 ma max. red 66 nm (mod. S7 E) red 635 nm (mod. S7 E2) +/SET/- push-button, LIGHT/DARK switch, RUN/PRG/ADJ mode switch yellow OUTPUT LED red SIGNAL LEVEL 4-digit display green THRESHOLD 4-digit display PNP or NPN PNP and push-pull (IO-Link mod. S7 PZ) ma max.,5 V max. (mod. S7 N) 2 V max. (mod. S7 P/PZ) S7 E: 2 µs ( Speed), 5 µs (), 2 ms ( Range), 5 ms (Extra Range) S7 E2: µs (Super Speed), 5 µs ( Speed), 5 µs (), 25 µs (), 5 µs ( Range), ms ( Range) S7 E: 2,5 khz ( Speed), khz (), 25 Hz ( Range), Hz (Extra Range) S7 E2: 5 khz (Super Speed), 33 khz ( Speed), khz (), 2 khz (), khz ( Range), 5 Hz ( Range) Connection 2 m cable, M8 4-pole connector Dielectric strength 5 Vac, min between electronics and housing Insulating resistance >2 MΩ, 5 Vdc between electronics and housing Electrical protection class 2 Mechanical protection IP5, NEMA Ambient light rejection according to EN Vibrations,5 mm amplitude, 55 Hz frequency, for every axis (EN ) Shock resistance ms (3 G) 6 shock for every axis (EN ) Housing material ABS Operating temperature - 55 C Storage temperature C Weight 69 g max. cable vers., 2 g max. conn. vers. DIMENSIONS cable CONNECTOR mm

3 Fiber Optic Sensors - S7 MAIN FEATURES The S7 is a high performance fiber optic amplifier with dual digital displays showing both signal level and threshold simultaneously. This advanced series ensures simple set-up and programming via displays and switches, push-button, remote input or IO-Link interface. Two S7 amplifiers can operate in close proximity to avoid interference thanks to a cross-talk algorithm. There is a temperature compensation feature to allow the side-by-side mounting of multiple fiber amplifiers. S7 is a compact and DIN rail mountable fiber optic amplifier with best in class response speed and repeatability. Two versions with different selectable response times are available: S7-E and S7-E2. All models work with any 2.2 mm fiber optic cable and the operating distance is determined by the optic fiber and accessory lens used and the response speed selected in the specific model. SETTINGS AND INDICATORS DF-G - Expert Dual Display Fiber Amplifier Manual The RUN/PRG/ADJ Mode Switch puts the sensor in RUN, PRG (Program), or ADJ (Adjust) mode. RUN mode allows the sensor to operate Overview normally and prevents unintentional programming changes via the +/SET/- button. PRG mode allows the sensor to be programmed The DF-G is through an easy-to-use, the display DIN-rail-mountable driven programming fiber optic menu. sensor. ADJ mode It provides allows high-performance the user to perform sensing TEACH in low-contrast and SET methods applications. and Manual The sensor s Adjust. compact housing has dual digital displays (Red/Green) and a bright output LED for easy programming and status monitoring LO/DO during Switch operation. is used The sensor to select features Light a Operate single discrete or Dark output, Operate either mode. NPN or PNP, by model. The The DF-G features increased temperature compensation compared with previous fiber optic sensors. An accessory clamp is available to secure a bank of connected sensors together on a DIN rail Top (see Panel Accessories Interface on page 28). Output LED 2 LO/DO Switch 3 RUN/PRG/ADJ Mode Switch 4 Lever Action Fiber Clamp 5 Red Signal Level Figure. DF-G Model Features 6 Green Threshold 7 +/SET/- Rocker Button As an alternative the sensor can be programmed remotely and the remote input may be used to perform TEACH and SET methods (not available on IO-Link models). Mounting Instructions CONNECTIONS Mount on a DIN Rail. Hook the DIN rail clip on the bottom of the DF-G over the edge of the DIN rail (). M8 CONNECTOR 2. Push the DF-G up on the DIN rail (). 3. Pivot the DF-G onto the DIN rail, pressing until it snaps into place (2). CABLE IO-Link Sensors With Mount IO-Link to interface, the Accessory S7-5-E-PZ Bracket can achieve point-to-point communication, allowing for remote configuration and monitoring capabilities. Designed to facilitate communication between sensors and actuators from different manufacturers and higher-level systems, the fieldbusindependent. Position IO-Link the serial DF-G communication in the SA-DIN-BRACKET. protocol offers a uniform standard that applies to all manufacturers. 2. Insert the supplied M3 screws. 3. Tighten the screws.

4 Fiber Optic Sensors - S7 S7-E DF-G Expert Dual Dual Display Fiber Fiber Amplifier Speed DF-G Expert Range Dual Display Extra Fiber Amplifier Range Response Time 2 µs 5 µs 2 ms 5 ms Repeatability 66 µs µs µs µs 8. Excess Gain Curves 8. Excess Gain Curves Mode PIT6U PIT6U Mode.25 mm (. in).25 mm (. in) Diameter Fibers.25 mm (. in) Diameter Fibers PBT6U PBT6U EXCESS GAIN X X X EXCESS GAIN X X X... DISTANCE... DISTANCE Through beam with.2 mm internal fiber.5 optic.5 mm diameter mm (.2 (.2 in) in) Diffuse Diameter proximity with.2 mm internal fiber optic diameter Fibers.5 mm (.2 in) Diameter Fibers PIT26U PBT26U PIT26U PBT26U EXCESS GAIN X X X... DISTANCE GAIN X X X Through beam with.5 mm internal fiber optic diameter Diffuse proximity with.5 mm internal fiber optic diameter

5 X Fiber Optic Sensors - S7 S7-E Repeatability DF-G Expert 66 µs µs µs µs Dual Display Fiber Amplifier. DF-G Expert Dual Display Fiber Amplifier DETECTION ANSPRECHKENNLINIEN DIAGRAM EXCESS GAIN EXCESS GAIN PIT46U PIT66U PIT46U Speed Range Extra Range Response Time 2 µs 5 µs 2 ms 5 ms.2 mm (.4 in) Diameter Fibers.52 mm (.6 in) Diameter Fibers.2 mm (.4 in) Diameter Fibers X X X PBT46U PBT66U PBT46U. DISTANCE Through beam with mm internal fiber optic diameter Diffuse proximity with mm internal fiber optic diameter.52 mm (.6 in) Diameter Fibers PIT66U PIT66U X X 28 EXCESS GAIN GAIN EXCESS GAIN.52 mm (.6 in) Diameter Fibers X X X X. PBT66U PBT66U X X.. DISTANCE Through beam with.5 mm internal fiber optic diameter Diffuse proximity with.5 mm internal fiber optic diameter

6 Fiber Optic Sensors - S7 S7-E Speed Range DF-G DF-G Expert Expert Dual Extra Range Dual Display Display Fiber Fiber Amplifier Amplifier Response Time 2 µs 5 µs 2 ms 5 ms Repeatability 66 µs µs µs DF-G DF-G Expert Expert Dual µs Dual Display Display Fiber Fiber Amplifier Amplifier Beam Patterns Beam Beam Patterns Mode X X Diffuse Mode mm mm (. (. in) in) Diameter Fibers Fibers Opposed Mode Diffuse Mode PIT6U PIT6U Detection area PBT6U PBT6U mm mm (. (. in) in) Diameter Diameter Fibers Fibers 4 X X X X Through beam with.2 DISTANCE mm DISTANCE internal fiber.5 optic.5 mm diameter mm (.2 (.2 in) in) Diameter Diffuse Fibers proximity DISTANCE Fibers with.2 mm internal fiber optic diameter X X X X X X PIT6U PIT6U PIT26U PIT26U PIT26U PIT26U.5.5 mm mm (.2 (.2 in) in) Diameter Diameter Fibers Fibers Detection area X X X X PBT6U PBT6U PBT26U PBT26U PBT26U PBT26U DISTANCE DISTANCE Through beam with.5 mm internal fiber optic diameter Diffuse proximity with.5 mm internal fiber optic diameter

7 Fiber Optic Sensors - S7 S7-E Speed Range Extra Range Response Time 2 µs 5 µs 2 ms 5 ms Repeatability 66 µs µs µs µs DF-G DF-G Expert Expert Dual Dual Display Display Fiber Fiber Amplifier Amplifier DF-G Expert Dual Display Fiber Amplifier DF-G Expert Dual Display Opposed Fiber Opposed Mode Amplifier Mode ANSPRECHKENNLINIEN BEAM WIDTH BEAM BEAM WIDTH WIDTH Opposed PIT46U Mode PIT46U PIT46U 4 4 PIT46U X X X X BEAM BEAM WIDTH WIDTH 8 8 Diffuse Diffuse Mode Mode Diffuse PBT46U Mode PBT46U X X X X Through beam with mm DISTANCE internal fiber optic.52 diameter.52 mm mm (.6 (.6 in) in) Diameter Diffuse Diameter Fibers proximity with mm internal fiber optic diameter Fibers 6 PIT66U PIT66U 6 X 5 X X X DISTANCE DISTANCE mm mm (.4 (.4 in) in) Diameter Diameter Fibers Fibers.2 mm Detection (.4 in) area Diameter Fibers.2 mm (.4 in) Diameter Fibers BEAM BEAM WIDTH WIDTH X X X X PBT46U PBT46U PIT66U PIT66U PBT66U.52 mm (.6 in) Diameter Fibers PBT66U.52 mm (.6 in) Diameter Fibers Detection area PBT66U PBT66U DISTANCE DISTANCE Through beam with.5 mm internal fiber optic diameter Diffuse proximity with.5 mm internal fiber optic diameter

8 Fiber Optic Sensors - S7 S7-E2 DF-G2 Speed Expert Dual Display Fiber Amplifier Super DF-G2 DF-G2 Speed Speed Expert Expert Speed Speed Range Range Dual Dual Display Display Fiber Fiber Amplifier Response Time µs 5 Amplifier µs 5 µs 25 µs 5 µs ms 7. Excess Gain Curves Repeatability 5 µs 5 µs 2 µs 5 µs 8 µs 65 µs 7. Excess Gain Curves Table :.25 mm (. in) Diameter Fibers Table Table : : mm mm (. (. Opposed in) in) Diameter Mode Fibers Fibers Opposed Mode EXCESS GAIN Super Super Super Super.... Figure DISTANCE 2. PIT6U EXCESS GAIN Diffuse Mode Super Super Super Super.... Figure DISTANCE 3. PBT6U Figure Figure PIT6U PIT6U Figure Figure PBT6U PBT6U Through beam with.2 mm internal fiber optic diameter Diffuse proximity with.2 mm internal fiber optic diameter Table 2:.5 mm (.2 in) Diameter Fibers Table Table 2: 2:.5.5 mm mm (.2 (.2 Opposed in) in) Diameter Mode Fibers Fibers Opposed Mode Diffuse Mode EXCESS GAIN Super Super Super Super.... DISTANCE Figure 4. PIT26U Through beam with.5 mm internal fiber optic diameter EXCESS GAIN Super Super Super Super.... DISTANCE Figure 5. PBT26U Diffuse proximity with.5 mm internal fiber optic diameter Figure Figure PIT26U PIT26U Figure Figure PBT26U PBT26U

9 Super Fiber Optic Sensors - S7 Super S7-E2. Super Speed Speed Range Range Response Time µs 5 µs 5 µs 25 µs 5 µs ms Repeatability 5 µs 5 µs 2 µs DF-G2 Speed 5 µs Expert Dual 8 Display µs Fiber Amplifier 65 µs Figure 6. PIT46U Figure 7. PBT46U Table 3:.2 mm (.4 in) Diameter Fibers ANSPRECHKENNLINIEN Table 3: 4:.2.52 mm (.4 (.6 in) Diameter Fibers DF-G2 Speed Expert Dual Display Fiber Amplifier EXCESS GAIN Super Super EXCESS GAIN Super Super Super Figure 6. PIT46U Figure PIT46U PIT66U Through beam with mm internal fiber optic diameter Table 4:.52 mm (.6 in) Diameter Fibers.. Figure 7. PBT46U Figure PBT46U PBT66U Diffuse proximity with mm internal fiber optic diameter Table 4:.52 mm (.6 in) Diameter Fibers EXCESS GAIN Super Super EXCESS GAIN Super Super Figure 8. PIT66U Through beam with.5 mm DISTANCE internal fiber optic diameter Figure 8. PIT66U 27.. Figure DISTANCE 9. PBT66U Diffuse proximity with.5 mm internal fiber optic diameter Figure 9. PBT66U

10 Fiber Optic Sensors - S7 S7-E2 DF-G2 Speed Expert Dual Display Fiber Amplifier Super Speed Speed Range Range DF-G2 DF-G2 Response Speed Time Speed Expert Expert Dual Dual µsdisplay Display Fiber Fiber Amplifier 5 µs Amplifier 5 µs 25 µs 5 µs ms Repeatability 5 µs 5 µs 2 µs 5 µs 8 µs 65 µs 7.2 Beam Patterns Table 5:.25 mm (. in) Diameter Fibers Beam Patterns Table 5:.25 mm (. Opposed Table 5:.25 mm (. in) in) Diameter Mode Fibers Fibers Opposed Mode Diffuse Mode Detection area Figure Figure PIT6U PIT6U DISTANCE Super Super Super Super Figure Figure PBT6U PBT6U DISTANCE Super Super Super Super Figure Figure PIT6U PIT6U Through beam with.2 mm internal fiber optic diameter Table 6:.5 mm (.2 in) Diameter Fibers Figure Figure PBT6U PBT6U Diffuse proximity with.2 mm internal fiber optic diameter Table 6:.5 mm (.2 Opposed Table 6:.5 mm (.2 in) in) Diameter Mode Fibers Fibers Detection area Opposed Mode Super Super Super Super Figure Figure 22. PIT26U DISTANCE DISTANCE 22. PIT26U Through beam with.5 mm internal fiber optic diameter BEAM WIDTH Diffuse Mode Super Super Super Super Figure Figure PBT26U PBT26U Diffuse proximity with DISTANCE.5 mm internal fiber optic diameter Figure Figure PIT26U PIT26U Figure Figure PBT26U PBT26U

11 Fiber Optic Sensors - S7 S7-E2 Super Speed Speed Range Range Response Time µs 5 µs 5 µs 25 µs 5 µs ms Repeatability 5 µs 5 µs 2 µs DF-G2 Speed 5 µs Expert Dual 8 Display µs Fiber Amplifier 65 µs Table 7:.2 mm (.4 in) Diameter Fibers ANSPRECHKENNLINIEN Table 7: 7:.2 mm (.4 in) in) Diameter Fibers DF-G2 Speed Expert Dual Dual Display Fiber Fiber Amplifier BEAM WIDTH Detection area Figure 24. PIT46U 2 Super Super Super BEAM WIDTH Figure PBT46U Super Super Super Figure Figure PIT46U Through beam with mm internal PIT46U fiber optic diameter Table 8:.52 mm (.6 in) Diameter Fibers Figure Figure PBT46U Diffuse proximity with mm internal PBT46Ufiber optic diameter Table 8: 8:.52 mm (.6 in) in) Diameter Fibers Detection area BEAM WIDTH Super Super Super Figure 26. PIT66U Through beam with.5 DISTANCE mm internal fiber optic diameter Figure Figure PIT66U PIT66U BEAM WIDTH Super Super Super Figure 27. PBT66U 6 Diffuse proximity with DISTANCE.5 mm internal fiber optic diameter Figure Figure PBT66U PBT66U

12 Fiber Optic Sensors - S7 ND ORDeR INFORMATION MODEL SELECTION AND ORDER INFORMATION Ion output display setting emission code n e npn OPTIC FUNCTION yes push-button RESPONSE TIME white Led CONNECTION OUTPUT MODEL ORDER No. e PnP yes push-button white Led NPN S7-2-E-N 9556 e npn yes push-button 2 m Cable red Led 9555 PNP S7-2-E-P 9556 e PnP yes push-button 2 µs 5 ms red Led 9555 NPN S7-5-E-N e npn Optic fiber no push-button red Led PNP S7-5-E-P e PnP no push-button red Led M8 Connector PNP, push-pull IO-Link S7-5-E-PZ connector npn yes push-button white Led 9555 NPN S7-5-E2-N connector PnP yes µs ms push-button white Led 9555 PNP S7-5-E2-P connector npn yes push-button red Led connector PnP yes push-button red Led ACCESSORIES connector npn no push-button red Led connector PnP no push-button red Led le PnP no MODEL trimmer red Led DESCRIPTION ORDER No. le npn no CRD-5 trimmer red Led DIN rail mounting bracket 95ACC279 connector PnP no trimmer red Led connector npn no trimmer red Led CRD-5 ST-55 CRD-5 mm ION AND ORDeR INFORMATION CABLES description code n pc L shaped fixing bracket 95acc28 pc TYPE din rail fixing bracket DESCRIPTION 95acc279 LENGTH MODEL ORDER No. sors of the General Catalogue 3 m CS-B-2-G-3 95A m CS-B-2-G-5 95A pole, grey, P.V.C. 7 m CS-B-2-G-7 95A2544 Axial M8 Connector m CS-B-2-G- 95A m CS-B-2-R-2 95A pole, P.U.R. 5 m CS-B-2-R-5 95A m CS-B2-2-G-3 95A m CS-B2-2-G-5 95A pole, grey, P.V.C. 7 m CS-B2-2-G-7 95A2547 Radial M8 Connector m CS-B2-2-G- 95A2553 UNI EN ISO9 2 m CS-B2-2-R-2 95A pole, P.U.R. 5 m CS-B2-2-R-5 95A2565 inuously improve and renew its products; for this reason the technical data and contents of this catalogue may undergo correct installation and use, the company can guarantee only the data indicated in the instruction manual supplied with the Rev., 7/24 UNI EN ISO9 The company endeavours to continuously improve and renew its products; for this reason the technical data and contents of this catalogue may undergo variations without prior notice. For correct installation and use, the company can guarantee only the data indicated in the instruction manual supplied with the products.