zamak nitrile rubber selfestinguishing technopolymer aluminum B10 24 V DC (± 10%) holding 0,32 W, pick-up 5,5 W (25 ms) IP65 button with tool

Transcription

1 P0 0mm COMPCT valves - threaded body and for sub-base mounting - Low standard power consumption (0,W): low power consumption electropilot B0 (standard version with LED) - Quick response times - High flow rate: the development of the traditional UNIVER spool technology permits high flow rate values - Compact design: the valve body (0mm) allows reduced overall dimensions - Complete solution - Threaded body (P0F) and body for sub-base (P0B) in the following versions: / - / - // - External and multipolar al connections - TC serial transmission system - Maximum application flexibility - Modular sub-base (single and double) for a high versatility in the composition of the valve manifolds - Simplified installation - Easy installation of tubes and fittings thanks to connections being all on the same side TECHNICL CHRCTERISTICS mbient temperature Fluid temperature Fluid Commutation system Ways/Positions Connections Nominal flow rate (Nl/min) CONSTRUCTIVE CHRCTERISTICS - 0 C max 0 C filtered air 0 μm not dehumidified, lubricated or not spool //, /, / control = max control = max 0 indirect electro-,, pneumo,, P0F: M, M P0B: M, M, tube Ø / = 0 / = 0 // = Valve body Seals Sub-base and actuators Spool zamak nitrile rubber selfestinguishing technopolymer aluminum ELECTRIC CHRCTERISTICS Electropilot Voltage Power consumption Protection degree Manual override B0 V DC (± 0%) holding 0, W, pick-up, W ( ms) IP button with tool CODIFICTION KEY P 0 F D Series Type P0F = threaded valve P0B = valve for base 0 = pneumo = = = elettric = / = / c.c. = / o.c. = / p.c. = /-NC = /-NO = /-NO Voltage = V DC = = Variant D = external servo-assistance of the pilot on valve body (P0 = M) COMPCT valves o.c. = open centres c.c. = closed centres p.c. = pressurized centres _

2 P0F 0 mm COMPCT, M threaded connections Single impulse Weight (Kg): 0,0 / pneumo, P0F0 Manual override /, 0 P0F - = Use = = Double impulse Weight (Kg): 0,0 / 0, 0 0 P0F Manual override / c.c. / o.c.,, P0F P0F - = Use = = / p.c., P0F, P0F, P0F, P0F o.c. = open centres c.c. = closed centres p.c. = pressurized centres _

3 P0F 0 mm COMPCT, M threaded connections Single impulse Weight (Kg): 0,0 / / pneumo, 0, 0 P0F0 P0F - = Use = = Double impulse Weight (Kg): 0,0 / / c.c. 0, 0, 0 P0F P0F - = Use = = / o.c., 0 P0F / p.c., 0 P0F, 0 P0F, 0 P0F COMPCT valves, 0 P0F o.c. = open centres c.c. = closed centres p.c. = pressurized centres _

4 P0SF 0 mm COMPCT, M threaded connections Integrated connection B End plate Sub-base place Sub-base place Modular tie-rods Valve Multipolar female connector Bus connection card Multipole connection module = Supply port - = Use - = Exhaust = = N = Number of valve places Manual override B Tightening torque G/ = max Nm TIM0 P0SF00 P0SF0 P0SF0 P0SF P0SF00 connection module poles male type D-sub weight: 0,0 Kg sub-base place weight: 0,0 Kg sub-base place -- closed weight: 0,0 Kg sub-base places weight: 0,0 Kg sub-base places -- closed weight: 0,0 Kg supply plate G/ left for TIM module weight: 0,0 Kg P0SF0 P0SF0 P0SF0 P0SF0 P0SS**M P0SS**M supply plate G/ right weight: 0,0 Kg supply pressure separator plate weight: 0,00 Kg covering plate for unused valve place weight: 0,00 Kg intermediate supply plate for threaded version weight: 0,00 Kg bus connection card, side ** = 0, 0, 0, 0, places weight: 0,00 Kg bus connection card, side ** = 0, 0, 0, 0, places weight: 0,00 Kg P0STR0 P0STR0 P0STR0 valve place (package00 pcs.) weight: 0,00 Kg valve places (package00 pcs.) weight: 0,00 Kg valve places (package00 pcs.) weight: 0,00 Kg Z-SN00 00 nuts M for tie-rods Z-VN00 00 screws for tie-rods _

5 P0SF 0 mm COMPCT, M threaded connections Electric connection with external connector B End plate Sub-base place Sub-base place Modular tie-rods Valve Single connection = Supply port - = Use - = Exhaust = = N = Number of valve places Manual override B Tightening torque G/ = max Nm P0SF00 P0SF0 P0SF00 P0SF0 P0SF P0SF0 sub-base place weight: 0,0 Kg sub-base place -- closed weight: 0,0 Kg sub-base places weight: 0,0 Kg sub-base places -- closed weight: 0,0 supply place G/ right/left weight: 0,0 Kg supply pressure separator plate weight: 0,00 Kg P0SF0 P0SF0 P0STR0 P0STR0 P0STR0 covering plate for unused valve place weight: 0,00 Kg Z-SN00 00 nuts for tie-rods intermediate supply plate for threaded version weight: 0,00 Kg valve place (package00 pcs.) weight: 0,00 Kg valve places (package00 pcs.) weight: 0,00 Kg valve places (package00 pcs.) weight: 0,00 Kg COMPCT valves Z-VN00 00 screws for tie-rods _

6 P0B 0 mm Compact for sub-base mounting Single impulse Weight (Kg): 0,0 / pneumo, P0B0 Manual override /, 0 P0B = = Double impulse Weight (Kg): 0,0 / 0, 0 0 P0B Manual override / c.c., P0B = = / o.c., P0B / p.c., P0B, P0B, P0B, P0B o.c. = open centres c.c. = closed centres p.c. = pressurized centres _

7 P0B 0 mm Compact for sub-base mounting Single impulse Weight (Kg): 0,0 / pneumo, P0B0 = = /, P0B Double impulse Weight (Kg): 0,0 / 0, P0B = = / c.c., P0B / o.c., P0B / p.c., P0B, P0B, P0B COMPCT valves, P0B o.c. = open centres c.c. = closed centres p.c. = pressurized centres _

8 P0SB 0 mm Compact for sub-base mounting Integrated connection B End plate Sub-base place Sub-base places Modular tie-rods Valve Multipolar female connector Bus connection card Multipole connection module = Supply port - = Use - = Exhaust = = N = Number of valve places Manual override B Tightening torque G/ - M= max Nm M = Nm TIM0 P0SB00/0 P0SB0/ P0SB0/ P0SB/ P0SB0 P0SB connection module poles male type D-sub weight: 0,0 Kg sub-base place side outlets M, M weight: 0,0 Kg sub-base place side outlets M, M -- closed weight: 0,0 Kg sub-base places side outlets M, M weight: 0,0 Kg sub-base places side outlets M, M -- closed weight: 0,0 Kg sub-base place side outlets with quick couplings pipe weight: 0,0 Kg sub-base place side outlets with quick couplings pipe -- closed weight: 0,0 Kg P0SB0 P0SB P0SB00 P0SB0 P0SB0 P0SB0 P0SB0 sub-base places side outlets with quick couplings pipe weight: 0,0 Kg sub-base place side outlets with quick couplings pipe -- closed weight: 0,0 Kg supply plate G/ left for TIM module weight: 0,0 Kg supply plate G/ right weight: 0,0 Kg supply pressure separator plate weight: 0,00 Kg covering plate for unused valve place weight: 0,00 Kg intermediate supply plate for sub-base weight: 0,00 Kg P0SS**M P0SS**M P0STR0 P0STR0 P0STR0 bus connection card, side ** = 0, 0, 0, 0, places weight: 0,00 Kg bus connection card,side ** = 0, 0, 0, 0, places weight: 0,00 Kg valve place (package00 pcs.) weight: 0,00 Kg valve places (package00 pcs.) weight: 0,00 Kg valve places (package00 pcs.) weight: 0,00 Kg Z-SN00 00 nuts for tie-rods Z-VN00 00 screws for tie-rods _0

9 P0 Flying connectors/chart for the connections D-U000 D-U000 TSCFNS000 TSCFNS000 TSCFNS000 TSCFNS000 TSCFND000 TSCFND000 TSCFND000 single connector with cable - m female connector poles type D-sub no cable M x fixing screws female connector poles type sub-d cable --0 m M x fixing screws flying male/female connector sub D (upon request) prewired for coils with cable Ø mm (--0 m lenght) suitable for mobile laying M x fixing screws Colour identification according to standard DIN 00 Female D-SUB poles for connection coils PIN No. Colour Coil side ValveN 0 white brown green yellow grey pink blue red nero black grey-pink red-blue white-green brown-green white-yellow yellow-brown white-grey grey-brown white-pink pink-brown white-blue brown-blue white-red brown-red brown-black shield white-black 0 common low COMPCT valves _

10 _