+ Incremental interface

Size: px
Start display at page:

Download "+ Incremental interface"

Transcription

1 i IEH58-INC-1-GB-1 04/12 Revision Incremental interface + Type with hollow through shaft + Modular product line + Extensive parameter setting possibilities + Special parameters upon request + Short lead times + Further interfaces available + Modular construction for mechanical customizations Characteristics Supply voltage VDC, optional 5 VDC ±5% Current consumption without load... < 65 ma, < 80 ma at 5 VDC Number of pulses/revolution 1) , >1.024: 2.048, 4.096, Version with push-pull - Output level VDC, supply voltage - Output current ma - Output frequency khz, ±15 - Supply voltage V DC Version with line driver - Output level... 5 VDC, RS422 - Output current ma - Output frequency khz, ±15 - Supply voltage V DC, optional 5 VDC Incremental signals... A+, A, B+, B Zero pulse... Ref+, Ref Programmable parameters - Number of pulses - Phase position: A / B, Zero pulse(s) - Zero pulse: Pulse length, Number of pulses - Enable/Disable Preset function, Set Ref+, Ref Preset... electronic adjustment of the reference signals Ref+, Ref Logic level... "0 < + 2 VDC, "1 = Supply voltage Mechanically permissible speed min -1 Shaft load... Own mass Bearing life time * revolutions at - Speed min -1 - Operating temperature C Shaft diameter in mm... 8H7, 10H7, 12H7 Permissible angular acceleration rad/s 2 Moment of inertia... typically 2.5 * 10-6 kg m 2 Start-up torque at 20 C... typically 3.7 Ncm Mass kg 0-5 kg 1) programmable parameter Subject to change TR-Electronic GmbH Eglishalde Trossingen Tel info@tr-electronic.de

2 Incremental-Encoder IEH 58 IEH58-INC-1-GB-1 04/12 Revision Environmental conditions Vibration, DIN EN : m/s 2, sine Hz Shock, DIN EN : m/s 2, half-sine 11ms EMC - Immunity to disturbance, DIN EN : Transient emissions, DIN EN : 2007 Working temperature... 0 C +60 C, optional -20 C +70 C Storage temperature C +80 C, dry Relative humidity, DIN EN : %, non condensing Protection class, DIN EN 60529: )... IP 54 2) valid with screwed on mating connector and / or screwed together cable gland Dimension drawing (For project planning please request customized dimensional drawing!) Subject to change TR-Electronic GmbH Eglishalde Trossingen Tel info@tr-electronic.de

3 Inkrementalgeber IEH58:2*10000 INC_PP DMS 14H7 KRF Order No.:IEH58: / Technical data NO. OF PULSES PROG. ABTASTUNGSART_GFR (E) <=10000 INTERFACE INCREMENTAL NO. OF CHANNELS K1-K2 NEG ZERO-PULSE K0 NEG SUPPLY VOLTAGE 4,5V..32V OUTPUT LEVEL HTL PROTECTION Class IP65 TEMPERATURE RANGE C SHAFT TYPE 14H7 HOLLOW SHAFT CONNECTOR TYPE CONTACT 12P CONNECTOR-POSITION CONNECTOR RADIAL ON HOUSING PINOUT NO. ST10296 MATING PLUG NO CLAMPING RING ON FLANGE MOMENT SUPPORT SPRING DRAWING NO. 04-IEH58:2-M0002 VERSIONNO 000

4

5 Pin assignment Pin assignment number: Index: Connector name: 12-pol CONTACT Pin-count: 12 Page: 1/1 Pin Designation Description Level Driver NC Colour 1 CH_A_OUT Channel A 4,5...32V Push Pull white 2 /CH_A_OUT Channel A inverted 4,5...32V Push Pull brown 3 Direction IN Change of counting direction Supply Voltage 0 green 4 CH_B_OUT Channel B 4,5...32V Push Pull yellow 5 /CH_B_OUT Channel B inverted 4,5...32V Push Pull gray 6 Preset1_IN Preset value 1 Supply Voltage 0 pink 7 CH_I_OUT Channel Reference 4,5...32V Push Pull blue 8 /CH_I_OUT Channel Reference inverted 4,5...32V Push Pull red 9 Ser.Program+_IN/OUT Ser. programming interface RS485 RS 485 RS 485 black 10 Ser.Program-_IN/OUT Ser. programming interface RS485 RS 485 RS 485 violet 11 Supply Voltage IN Supply voltage V gray/pink 12 Ground IN Ground 0V red/blue WARNING 'De-energize the system before carrying out wiring work or opening and closing electrical connections! Short-circuits, voltage peaks, etc. can cause operating failures and uncontrolled operating states, as well as serious personal injuries and damage to property. Verdrahtungsarbeiten, Öffnen und Schließen von elektrischen Verbindungen nur im spannungslosen Zustand durchführen! Kurzschlüsse, Spannungsspitzen etc. können zur Fehlfunktion und unkontrollierten Zuständen der Anlage bzw. zu erheblichen Personen- und Sachschäden führen. '

6 Inkrementalgeber IEH58:2*10000 INC_PP DMS 12H7 KRF Order No.:IEH58: / Technical data NO. OF PULSES PROG. ABTASTUNGSART_GFR (E) <=10000 INTERFACE INCREMENTAL NO. OF CHANNELS K1-K2 NEG ZERO-PULSE K0 NEG SUPPLY VOLTAGE 4,5V..32V OUTPUT LEVEL HTL PROTECTION Class IP65 TEMPERATURE RANGE C SHAFT TYPE 12H7 HOLLOW SHAFT CONNECTOR TYPE CONTACT 12P CONNECTOR-POSITION CONNECTOR RADIAL ON HOUSING PINOUT NO. ST10296 MATING PLUG NO CLAMPING RING ON FLANGE MOMENT SUPPORT SPRING DRAWING NO. 04-IEH58:2-M0003 VERSIONNO 000

7

8 Pin assignment Pin assignment number: Index: Connector name: 12-pol CONTACT Pin-count: 12 Page: 1/1 Pin Designation Description Level Driver NC Colour 1 CH_A_OUT Channel A 4,5...32V Push Pull white 2 /CH_A_OUT Channel A inverted 4,5...32V Push Pull brown 3 Direction IN Change of counting direction Supply Voltage 0 green 4 CH_B_OUT Channel B 4,5...32V Push Pull yellow 5 /CH_B_OUT Channel B inverted 4,5...32V Push Pull gray 6 Preset1_IN Preset value 1 Supply Voltage 0 pink 7 CH_I_OUT Channel Reference 4,5...32V Push Pull blue 8 /CH_I_OUT Channel Reference inverted 4,5...32V Push Pull red 9 Ser.Program+_IN/OUT Ser. programming interface RS485 RS 485 RS 485 black 10 Ser.Program-_IN/OUT Ser. programming interface RS485 RS 485 RS 485 violet 11 Supply Voltage IN Supply voltage V gray/pink 12 Ground IN Ground 0V red/blue WARNING 'De-energize the system before carrying out wiring work or opening and closing electrical connections! Short-circuits, voltage peaks, etc. can cause operating failures and uncontrolled operating states, as well as serious personal injuries and damage to property. Verdrahtungsarbeiten, Öffnen und Schließen von elektrischen Verbindungen nur im spannungslosen Zustand durchführen! Kurzschlüsse, Spannungsspitzen etc. können zur Fehlfunktion und unkontrollierten Zuständen der Anlage bzw. zu erheblichen Personen- und Sachschäden führen. '

9 Inkrementalgeber IEH58:2*10000 INC_PP DMS 10H7 KRF Order No.:IEH58: / Technical data NO. OF PULSES PROG. ABTASTUNGSART_GFR (E) <=10000 INTERFACE INCREMENTAL NO. OF CHANNELS K1-K2 NEG ZERO-PULSE K0 NEG SUPPLY VOLTAGE 4,5V..32V OUTPUT LEVEL HTL PROTECTION Class IP65 TEMPERATURE RANGE C SHAFT TYPE 10H7 HOLLOW SHAFT CONNECTOR TYPE CONTACT 12P CONNECTOR-POSITION CONNECTOR RADIAL ON HOUSING PINOUT NO. ST10296 MATING PLUG NO CLAMPING RING ON FLANGE MOMENT SUPPORT SPRING DRAWING NO. 04-IEH58:2-M0004 VERSIONNO 000

10

11 Pin assignment Pin assignment number: Index: Connector name: 12-pol CONTACT Pin-count: 12 Page: 1/1 Pin Designation Description Level Driver NC Colour 1 CH_A_OUT Channel A 4,5...32V Push Pull white 2 /CH_A_OUT Channel A inverted 4,5...32V Push Pull brown 3 Direction IN Change of counting direction Supply Voltage 0 green 4 CH_B_OUT Channel B 4,5...32V Push Pull yellow 5 /CH_B_OUT Channel B inverted 4,5...32V Push Pull gray 6 Preset1_IN Preset value 1 Supply Voltage 0 pink 7 CH_I_OUT Channel Reference 4,5...32V Push Pull blue 8 /CH_I_OUT Channel Reference inverted 4,5...32V Push Pull red 9 Ser.Program+_IN/OUT Ser. programming interface RS485 RS 485 RS 485 black 10 Ser.Program-_IN/OUT Ser. programming interface RS485 RS 485 RS 485 violet 11 Supply Voltage IN Supply voltage V gray/pink 12 Ground IN Ground 0V red/blue WARNING 'De-energize the system before carrying out wiring work or opening and closing electrical connections! Short-circuits, voltage peaks, etc. can cause operating failures and uncontrolled operating states, as well as serious personal injuries and damage to property. Verdrahtungsarbeiten, Öffnen und Schließen von elektrischen Verbindungen nur im spannungslosen Zustand durchführen! Kurzschlüsse, Spannungsspitzen etc. können zur Fehlfunktion und unkontrollierten Zuständen der Anlage bzw. zu erheblichen Personen- und Sachschäden führen. '

12 Inkrementalgeber IEH58:2*10000 INC_PP DMS 12H7 KRF Order No.:IEH58: / Technical data NO. OF PULSES PROG. ABTASTUNGSART_GFR (E) <=10000 INTERFACE INCREMENTAL NO. OF CHANNELS K1-K2 NEG ZERO-PULSE K0 NEG SUPPLY VOLTAGE 4,5V..32V OUTPUT LEVEL HTL PROTECTION Class IP65 TEMPERATURE RANGE C SHAFT TYPE 12H7 HOLLOW SHAFT CONNECTOR-POSITION PG RADIAL cable length (m) 2,000 M PINOUT NO. ST10297 MATING PLUG NO CLAMPING RING ON FLANGE MOMENT SUPPORT SPRING DRAWING NO. 04-IEH58:2-M0005 VERSIONNO 000

13

14 Pin assignment Pin assignment number: Index: Connector name: with cable outlet Pin-count: 12 Page: 1/1 Pin Designation Description Level Driver NC Colour 1 CH_A_OUT Channel A 4,5...32V Push Pull white 2 /CH_A_OUT Channel A inverted 4,5...32V Push Pull brown 3 Direction IN Change of counting direction Supply Voltage 0 green 4 CH_B_OUT Channel B 4,5...32V Push Pull yellow 5 /CH_B_OUT Channel B inverted 4,5...32V Push Pull gray 6 Preset1_IN Preset value 1 Supply Voltage 0 pink 7 CH_I_OUT Channel Reference 4,5...32V Push Pull blue 8 /CH_I_OUT Channel Reference inverted 4,5...32V Push Pull red 9 Ser.Program+_IN/OUT Ser. programming interface RS485 RS 485 RS 485 black 10 Ser.Program-_IN/OUT Ser. programming interface RS485 RS 485 RS 485 violet 11 Supply Voltage IN Supply voltage 4,5...32V gray/pink 12 Ground IN Ground 0V red/blue WARNING 'De-energize the system before carrying out wiring work or opening and closing electrical connections! Short-circuits, voltage peaks, etc. can cause operating failures and uncontrolled operating states, as well as serious personal injuries and damage to property. Verdrahtungsarbeiten, Öffnen und Schließen von elektrischen Verbindungen nur im spannungslosen Zustand durchführen! Kurzschlüsse, Spannungsspitzen etc. können zur Fehlfunktion und unkontrollierten Zuständen der Anlage bzw. zu erheblichen Personen- und Sachschäden führen. '

15 Inkrementalgeber IEH58:2*10000 INC_PP DMS 14H7 KRF Order No.:IEH58: / Technical data NO. OF PULSES PROG. ABTASTUNGSART_GFR (E) <=10000 INTERFACE INCREMENTAL NO. OF CHANNELS K1-K2 NEG ZERO-PULSE K0 NEG SUPPLY VOLTAGE 4,5V..32V OUTPUT LEVEL HTL PROTECTION Class IP65 TEMPERATURE RANGE C SHAFT TYPE 14H7 HOLLOW SHAFT CONNECTOR-POSITION PG RADIAL cable length (m) 2,000 M PINOUT NO. ST10297 MATING PLUG NO CLAMPING RING ON FLANGE MOMENT SUPPORT SPRING DRAWING NO. 04-IEH58:2-M0007 VERSIONNO 000

16

17 Pin assignment Pin assignment number: Index: Connector name: with cable outlet Pin-count: 12 Page: 1/1 Pin Designation Description Level Driver NC Colour 1 CH_A_OUT Channel A 4,5...32V Push Pull white 2 /CH_A_OUT Channel A inverted 4,5...32V Push Pull brown 3 Direction IN Change of counting direction Supply Voltage 0 green 4 CH_B_OUT Channel B 4,5...32V Push Pull yellow 5 /CH_B_OUT Channel B inverted 4,5...32V Push Pull gray 6 Preset1_IN Preset value 1 Supply Voltage 0 pink 7 CH_I_OUT Channel Reference 4,5...32V Push Pull blue 8 /CH_I_OUT Channel Reference inverted 4,5...32V Push Pull red 9 Ser.Program+_IN/OUT Ser. programming interface RS485 RS 485 RS 485 black 10 Ser.Program-_IN/OUT Ser. programming interface RS485 RS 485 RS 485 violet 11 Supply Voltage IN Supply voltage 4,5...32V gray/pink 12 Ground IN Ground 0V red/blue WARNING 'De-energize the system before carrying out wiring work or opening and closing electrical connections! Short-circuits, voltage peaks, etc. can cause operating failures and uncontrolled operating states, as well as serious personal injuries and damage to property. Verdrahtungsarbeiten, Öffnen und Schließen von elektrischen Verbindungen nur im spannungslosen Zustand durchführen! Kurzschlüsse, Spannungsspitzen etc. können zur Fehlfunktion und unkontrollierten Zuständen der Anlage bzw. zu erheblichen Personen- und Sachschäden führen. '

18 Inkrementalgeber IEH58:2*10000 INC_PP DMS 15H7 KRF Order No.:IEH58: / Technical data NO. OF PULSES PROG. ABTASTUNGSART_GFR (E) <=10000 INTERFACE INCREMENTAL NO. OF CHANNELS K1-K2 NEG ZERO-PULSE K0 NEG SUPPLY VOLTAGE 4,5V..32V OUTPUT LEVEL HTL PROTECTION Class IP65 TEMPERATURE RANGE C SHAFT TYPE 15H7 HOLLOW SHAFT CONNECTOR-POSITION PG RADIAL cable length (m) 2,000 M PINOUT NO. ST10297 MATING PLUG NO CLAMPING RING ON FLANGE MOMENT SUPPORT SPRING DRAWING NO. 04-IEH58:2-M0008 VERSIONNO 000

19

20 Pin assignment Pin assignment number: Index: Connector name: with cable outlet Pin-count: 12 Page: 1/1 Pin Designation Description Level Driver NC Colour 1 CH_A_OUT Channel A 4,5...32V Push Pull white 2 /CH_A_OUT Channel A inverted 4,5...32V Push Pull brown 3 Direction IN Change of counting direction Supply Voltage 0 green 4 CH_B_OUT Channel B 4,5...32V Push Pull yellow 5 /CH_B_OUT Channel B inverted 4,5...32V Push Pull gray 6 Preset1_IN Preset value 1 Supply Voltage 0 pink 7 CH_I_OUT Channel Reference 4,5...32V Push Pull blue 8 /CH_I_OUT Channel Reference inverted 4,5...32V Push Pull red 9 Ser.Program+_IN/OUT Ser. programming interface RS485 RS 485 RS 485 black 10 Ser.Program-_IN/OUT Ser. programming interface RS485 RS 485 RS 485 violet 11 Supply Voltage IN Supply voltage 4,5...32V gray/pink 12 Ground IN Ground 0V red/blue WARNING 'De-energize the system before carrying out wiring work or opening and closing electrical connections! Short-circuits, voltage peaks, etc. can cause operating failures and uncontrolled operating states, as well as serious personal injuries and damage to property. Verdrahtungsarbeiten, Öffnen und Schließen von elektrischen Verbindungen nur im spannungslosen Zustand durchführen! Kurzschlüsse, Spannungsspitzen etc. können zur Fehlfunktion und unkontrollierten Zuständen der Anlage bzw. zu erheblichen Personen- und Sachschäden führen. '

IP40 or IP64 (EN 60529) Protection class housing. IP50 (IP65 optional) (EN 60529) Minimum length of mountig

IP40 or IP64 (EN 60529) Protection class housing. IP50 (IP65 optional) (EN 60529) Minimum length of mountig Through hollow shaft Ø 5 bis 4 mm Outside diameter only 76 mm Easy installation by means of clamping ring front or rear Operating temperature up to 00 C Applications: motors, printing machines, lifts NUMBER

More information

TECHNICAL DATASHEET Incremental Encoder RI 58-D / RI 58TD

TECHNICAL DATASHEET Incremental Encoder RI 58-D / RI 58TD Direct mounting without coupling Flexible hollow shaft design up to diameter 4 mm Through hollow shaft or as end shaft (blind shaft) Easy installation by means of clamping shaft or blind shaft Short overall

More information

How To Power A Schen

How To Power A Schen Automation / Mini Type SCH32F Hollow Shaft Encoder - Ø 32 mm Hollow Bore: Ø 6 mm to Ø 3/8 inch Resolution up to 5000 ppr IP 65 (IP 50 for IDC connector option) Electrical Specifications Code: Resolution:

More information

Material: Weight: Bearing Life: Shaft Speed: Starting Torque: Mass Moment of Inertia: Shaft Loads:

Material: Weight: Bearing Life: Shaft Speed: Starting Torque: Mass Moment of Inertia: Shaft Loads: Automation / Mini Type SCH32F Hollow Shaft Encoder - Ø 32 mm Hollow Bore: Ø 6 mm to Ø 3/8 inch Resolution up to 5000 ppr IP 65 (IP 50 for IDC connector option) Electrical Specifications Code: Resolution:

More information

TECHNICAL DATASHEET Incremental Encoder RI 58-H

TECHNICAL DATASHEET Incremental Encoder RI 58-H Through hollow shaft High accuracy by means of integrated flexible coupling Safe shaft mounting Applications: textile machines, motors, drives, copiers NUMBER OF PULSES 1 / 2 / 3 / 4 / 5 / 10 / 15 / 20

More information

TECHNICAL DATASHEET Incremental Encoder RI 80-E

TECHNICAL DATASHEET Incremental Encoder RI 80-E Incremental 30-45 hollow shaft Rugged mechanical design Unbreakable disc Integrated diagnostic system Wide voltage range DC 5-30 V Isolated shaft NUMBER OF PULSES 1024 / 2048 / 2500 / 4096 / 5000 / 10000

More information

Housing diameter Shaft diameter 1. Flange (Mounting of housing) Protection class shaft input (EN 60529) Protection class housing (EN 60529)

Housing diameter Shaft diameter 1. Flange (Mounting of housing) Protection class shaft input (EN 60529) Protection class housing (EN 60529) Direct mounting without coupling Flexible hollow shaft design up to diameter 4 mm Through hollow shaft or as end shaft (blind shaft) Easy installation by means of clamping shaft or blind shaft Short overall

More information

Technical data. General specifications. Signal voltage 15... 30 V DC Signal duration. 1 s Input 2. Signal voltage. 1 s Analog output.

Technical data. General specifications. Signal voltage 15... 30 V DC Signal duration. 1 s Input 2. Signal voltage. 1 s Analog output. Model Number Features Very small housing High climatic resistance 4 Bit multiturn Analog output Surge and reverse polarity protection Description This absolute rotary encoder with internal magnetic sampling

More information

TECHNICAL DATASHEET Incremental Encoder RI 58-O / RI 58-T

TECHNICAL DATASHEET Incremental Encoder RI 58-O / RI 58-T Universal industry standard encoder Up to 40 000 steps with 0 000 pulses High signal accuracy Protection class up to IP67 Flexible due to many flange and configuration variants Suitable for high shock

More information

Material: Weight: Bearing Life: Shaft Loads: Operating Temp.: Storage Temp.: Shock: Vibration: Bump: Humidity: Enclosure Rating: Cable: Cable Glands:

Material: Weight: Bearing Life: Shaft Loads: Operating Temp.: Storage Temp.: Shock: Vibration: Bump: Humidity: Enclosure Rating: Cable: Cable Glands: Oil & Gas / Heavy Industry EX-Proof Stainless Steel Shaft Encoder - Ø 68 mm Shaft - Ø 10 mm to Ø 5/8 inch Resolution up to 10,000 ppr IP 66 (IP 67 option) ATEX certified EX-Proof IECEx certified EX-Proof

More information

Contactless Encoder RI360P0-QR24M0-INCRX2-H1181

Contactless Encoder RI360P0-QR24M0-INCRX2-H1181 Compact, rugged housing Many mounting possibilities Status displayed via LED Immune to electromagnetic interference 1024 pulses per revolution (default) 360, 512, 1000, 1024, 2048, 2500, 3600, 4096, parametr.

More information

Description. Dimensions. Features. www.pwb-encoders.com. precision works better

Description. Dimensions. Features. www.pwb-encoders.com. precision works better Description The MEC22 is a high resolution optical hollow shaft encoder that can be fixed quickly and easily on different sizes of motor shafts. The encoder provides two square wave outputs in quadrature

More information

Series 7500 Torque Sensor

Series 7500 Torque Sensor Properties PTO (Power Take-Off) shaft with integrated torque and angle measurement Non-contact measurement system, high robustness Plug & Play solution, no additional electronics required Performance Measurement

More information

QR12 (1.22 ) Diameter Optical Encoder

QR12 (1.22 ) Diameter Optical Encoder Improving the Quality of Life through the Power in Light QPhase QR12 (1.22 ) Diameter Optical Encoder Design Features: Low profile assembled height of Bearing design simplifies encoder attachment Resolutions

More information

RoHS. Shock / vibration resistant. Magnetic field proof. Many variants

RoHS. Shock / vibration resistant. Magnetic field proof. Many variants Sendix 5000 / 500 (Shaft / Hollow shaft) Push-Pull / RS4 ue to their sturdy bearing construction in Safety-ock esign, the Sendix 5000 and 500 offer high resistance against vibration and installation errors.

More information

Series 6000 Torque measured metal bellow coupling

Series 6000 Torque measured metal bellow coupling Properties Free of float metal bellow coupling with integrated torque measurement Non-contact measurement system, high robustness High torsional stiffness Limited torque of inertia Performance Measurement

More information

ABSOLUTE ROTARY ENCODER ETHERNET/IP

ABSOLUTE ROTARY ENCODER ETHERNET/IP Main Features - Compact and heavy duty industrial model - Interface: EtherNet/IP - Conformance tested by ODVA - Housing: 58 mm - Full shaft: 6 or 10 mm / hollow shaft15 mm - Resolution: max. 30 Bit = 1,073,741,824

More information

Product Information. Gateway For Connecting EnDat Encoders to PROFIBUS-DP

Product Information. Gateway For Connecting EnDat Encoders to PROFIBUS-DP Product Information Gateway For Connecting EnDat Encoders to PROFIBUS-DP April 2012 PROFIBUS Gateway For Connecting EnDat Encoders Encoders with EnDat interface for connection via gateway All absolute

More information

SV 210 Signal Splitter and Incremental Converter for Sine-Cosine Encoders

SV 210 Signal Splitter and Incremental Converter for Sine-Cosine Encoders control motion interface motrona GmbH Zwischen den Wegen 32 78239 Rielasingen - Germany Tel. +49 (0)7731-9332-0 Fax +49 (0)7731-9332-30 info@motrona.com www.motrona.com SV 210 Signal Splitter and Incremental

More information

6 mm (Synchronus flange) 10 mm (Clamp flange) 10 / 12 mm (Plug shaft) axial 40 N, radial 60 N (10, 12 mm Shaft) Operating speed 10 000 min -1

6 mm (Synchronus flange) 10 mm (Clamp flange) 10 / 12 mm (Plug shaft) axial 40 N, radial 60 N (10, 12 mm Shaft) Operating speed 10 000 min -1 Absolut Encoder BC 58 Singleturn / Multiturn short cicurit-proof Parallel, SSI, Profibus DP, Interbus (K2) (K3) DeviceNet, CAN, CANopen, Mechanical Specifications: (Synchronus flange) (Clamp flange) 10

More information

3-PHASE STEPPING MOTOR. VRDM 39x. Document: 100000116 Edition: d013, 2005.02

3-PHASE STEPPING MOTOR. VRDM 39x. Document: 100000116 Edition: d013, 2005.02 -PHASE STEPPING MOTOR VRDM 9x Edition: d, 5. Features common to all motor types Test voltage to DIN EN 64 part Insulation class F Run-out and perpendicularity to DIN 4955 N Paint: black RAL 95 Security

More information

LENORD. +BAUER... automates motion. PowerDRIVE-Positioning GEL 6109 Compact positioning drive for installation situations with limited space

LENORD. +BAUER... automates motion. PowerDRIVE-Positioning GEL 6109 Compact positioning drive for installation situations with limited space PowerDRIVE-Positioning GEL 6109 Compact positioning drive for installation situations with limited space LENORD +BAUER... automates motion. Technical information Version 2014-09 General The PowerDRIVE-Positioning

More information

Encoder WDGI 58H. www.wachendorff-automation.com/wdgi58h

Encoder WDGI 58H. www.wachendorff-automation.com/wdgi58h Encoder WDGI H www.wachendorffautomation.com/wdgih Wachendorff utomation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and customer versions

More information

Cable Plug acc. to DIN EN 175301-803, Form A

Cable Plug acc. to DIN EN 175301-803, Form A Cable Plug acc. to DIN EN 175301-803, Form A Complete program Contact form 18 mm Also available with LED indicator Optional 4-pin version for pressure switch or impulse valves respectively Versions with

More information

Absolute Rotary Encoder E6CP

Absolute Rotary Encoder E6CP Absolute Rotary Encoder Absolute Rotary Encoders with Gray Code Output Gray code output decreases output errors Lightweight plastic housing Used with Omron s H8PS Cam Positioner, this encoder detects the

More information

T-SERIES INDUSTRIAL INCLINOMETER ANALOG INTERFACE

T-SERIES INDUSTRIAL INCLINOMETER ANALOG INTERFACE T-SERIES INDUSTRIAL INCLINOMETER ANALOG INTERFACE T-Series industrial inclinometers are compact high performance sensors used to determine inclination in roll and pitch axes with excellent precision and

More information

PD30ETB20xxIS. Photoelectrics, Background Suppression reflective with IR light. Main features. Description

PD30ETB20xxIS. Photoelectrics, Background Suppression reflective with IR light. Main features. Description Photoelectrics, Background Suppression reflective with IR light Main features Description The PD30ET... stainless steel sensors are built with high-quality materials and designed for harsh environments.

More information

maxon sensor maxon sensor

maxon sensor maxon sensor Sensor Spindle drive Gearhead E Motor (BLD Motor) D Motor X Drives (configurable) Motor control obust encoders, D tachometers, and resolvers with high accuracy and high signal resolution. Due to resonance,

More information

ABB Drives. User s Manual HTL Encoder Interface FEN-31

ABB Drives. User s Manual HTL Encoder Interface FEN-31 ABB Drives User s Manual HTL Encoder Interface FEN-31 HTL Encoder Interface FEN-31 User s Manual 3AUA0000031044 Rev B EN EFFECTIVE: 2010-04-06 2010 ABB Oy. All Rights Reserved. 5 Safety instructions

More information

Magnetic field sensor for pneumatic cylinders BIM-INT-Y1X-H1141

Magnetic field sensor for pneumatic cylinders BIM-INT-Y1X-H1141 ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 as per IEC 61508 Rectangular, height 6mm Plastic, PA12 Magnetic-inductive sensor DC 2-wire, nom. 8.2 VDC Output acc. to DIN EN 60947-5-6

More information

Adjustment functions for both span and shift have been incorporated

Adjustment functions for both span and shift have been incorporated SENSORS FOR SERIES LED Type Wafer Alignment Sensor FX-0-F FT-F9 FD-F7 EX-F70/F60 M SH-7 FD-L4 M-DW The use of a safe LED light beam now allows for high precision detection with a resolution of 0!m (.8

More information

Temperature sensor with integrated transmitter for industrial applications, MBT 3560

Temperature sensor with integrated transmitter for industrial applications, MBT 3560 Temperature sensor with integrated transmitter for industrial applications, MBT 3560 Technical brochure Features Designed for use in harsh industrial enviroments where reliable, robust and accurate equipment

More information

Sense it! Connect it! Bus it! Solve it! EncoderS

Sense it! Connect it! Bus it! Solve it! EncoderS Sense it! Connect it! Bus it! Solve it! EncoderS Incremental encoders Incremental encoders use electrical pulses to measure rotation speed or position. The dual-channel incremental encoders of the Ri series,

More information

I.T. 6430. BSV-N series 25 ELECTROMECHANICAL TURRETS 09-08 TECHNICAL INFORMATION ISSUED

I.T. 6430. BSV-N series 25 ELECTROMECHANICAL TURRETS 09-08 TECHNICAL INFORMATION ISSUED series 25 ELECTROMECHANICAL TURRETS TECHNICAL INFORMATION I.T. 643 GB The data given in the I.T. are subject to technical modifications without notice. ISSUED 9-8 WORKING PRINCIPLE Water-proof housing

More information

How To Control A Power Supply With A Mini Transmitter And Switch (Power Supply)

How To Control A Power Supply With A Mini Transmitter And Switch (Power Supply) transmitter (2 wire) / switch for continuous or On/Off Control Indication, monitoring, transmitting and continuous or On/Off control in one device Output signal 4...20 ma, 2-wire for continuous control

More information

ABSOLUTE OPTICAL ROTARY ENCODER MULTITURN BIT PARALLEL

ABSOLUTE OPTICAL ROTARY ENCODER MULTITURN BIT PARALLEL Main Features - Compact and Heavy-Duty Industrial Model - Interface: Bit Parallel, Push Pull, Short Circuit Proof - Input: Preset (optional) and Latch - Housing: 58 mm - Shaft: 6 or 10 mm Hollow- 15 mm

More information

Encoder WDG 58B. www.wachendorff-automation.com/wdg58b

Encoder WDG 58B. www.wachendorff-automation.com/wdg58b Encoder WDG www.wachendorffautomation.com/wdgb Wachendorff utomation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and customer versions Maximum

More information

Analogue Input, 4-fold, MDRC AE/S 4.1, GH Q605 0054 R0001

Analogue Input, 4-fold, MDRC AE/S 4.1, GH Q605 0054 R0001 Analogue Input, -fold, MDRC, GH Q605 005 R0001 The analogue input is a DIN rail mounted device for insertion in the distribution board. It is connected to the EIB via the bus connecting terminal supplied.

More information

TM7BDM8B expansion block - TM7 - IP67-8 DI/DO - 24V DC - 0.5 A - M8 connector

TM7BDM8B expansion block - TM7 - IP67-8 DI/DO - 24V DC - 0.5 A - M8 connector Product datasheet Characteristics TM7BDM8B expansion block - TM7 - IP67-8 DI/DO - 24V DC - 0.5 A - M8 connector Main Range of product Product or component type Range compatibility Enclosure material Bus

More information

Pressure transmitter For general industrial applications Model A-10

Pressure transmitter For general industrial applications Model A-10 Electronic pressure measurement Pressure transmitter For general industrial applications Model A-10 WIKA data sheet PE 81.60 for further approvals see page 9 Applications Machine building Shipbuilding

More information

Incremental rotary encoders IE58+FS

Incremental rotary encoders IE58+FS Incremental rotary encoders IE58+FS www.tr-electronic.com Incremental Rotary Encoders - Resolution Factory Set Incremental rotary encoders I_58+FS - Housing 58 mm Safety-oriented incremental rotary encoder

More information

www.kem-kueppers.com info@kem-kueppers.com Certified according to DIN EN ISO 9001 Technical Datasheet TRICOR Series Mass Flow Meters

www.kem-kueppers.com info@kem-kueppers.com Certified according to DIN EN ISO 9001 Technical Datasheet TRICOR Series Mass Flow Meters www.kem-kueppers.com info@kem-kueppers.com Certified according to DIN EN ISO 9001 Technical Datasheet TRICOR Series Mass Flow Meters Description The Tricor Mass Flow Meters measure simultaneously mass

More information

Conductive Level Switch FK 2 Technical Data:

Conductive Level Switch FK 2 Technical Data: Level switch for conductive liquids Optional electrode length adjustment Hygienic installation in accordance with EHEDG Wetted parts compatible with FDA requirements Potted electronic Not influenced by

More information

Switch Actuator, 8-fold, 10 A, MDRC AT/S 8.10.1, GH Q631 0075 R0111

Switch Actuator, 8-fold, 10 A, MDRC AT/S 8.10.1, GH Q631 0075 R0111 , GH Q631 0075 R0111 The 8-fold switch actuator is a DIN rail mounted device for insertion in the distribution board. It is connected to the EIB via a bus terminal. In the event of bus voltage failure,

More information

Inductive sensor NI10-M18-Y1X-H1141

Inductive sensor NI10-M18-Y1X-H1141 ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 as per IEC 61508 Threaded barrel, M18 x 1 Chrome-plated brass DC 2-wire, nom. 8.2 VDC Output acc. to DIN EN 60947-5-6 (NA- MUR) M12

More information

Datasheet of the Easy Servo Motor ES-M Series

Datasheet of the Easy Servo Motor ES-M Series Datasheet of the Easy Servo Motor ES-M Series Stepper Motor with Encoder, 0.9-8 Nm Version 1.3 http://www.leadshine.com Descriptions Leadshine s ES-M series easy servo motors, or stepper motors with encoders,

More information

Ferrostat Speed Sensor Series DSF Explosion Proof Versions EEx

Ferrostat Speed Sensor Series DSF Explosion Proof Versions EEx Ferrostat Speed Sensor Series DSF Explosion Proof Versions EEx DSF..10.**.HV Ex ATEX Operating Instructions 374E-64368 Valid from lot nr. 0103 General Function Use in potentially explosive environment

More information

-Encoder with end or hollow shaft ø10-15 mm. hollow shaft ø12 mm -Resolution max. 32 ppr. -Resolution max. 1024 ppr -Magnetic sensing

-Encoder with end or hollow shaft ø10-15 mm. hollow shaft ø12 mm -Resolution max. 32 ppr. -Resolution max. 1024 ppr -Magnetic sensing Incremental encoders Compact configurations Shaft ø4 mm and ø5 mm End shaft ø8-16 mm Hollow shaft ø6-15 mm Optical and magnetic sensing Resolution max. 2048 pulses Rotation speed max. 12000 rpm Protection

More information

Telephone- and leased line modem for industrial applications TD-36

Telephone- and leased line modem for industrial applications TD-36 Telephone- and leased line modem for industrial applications TD-36 Modem for industrial PSTN- and leased line applications The TD-36 is an analogue V.34 PSTN modem as well as an industrial 2-wire leased

More information

APPENDIX A PIN-OUT OF RJ12 / RJ45 CONNECTORS. RJ12 connectors

APPENDIX A PIN-OUT OF RJ12 / RJ45 CONNECTORS. RJ12 connectors APPENDIX APPENDIX A PIN-OUT OF RJ12 / RJ45 CONNECTORS RJ12 connectors Pin # 1 Signal Name Not Used 2 +TR Description + Data Line 3 +R Remote OFF Required or Remote OFF control 4 -TR 5 Not Used 6 RTN -

More information

HSP GmbH Zum Handwerkerhof 2 90530 Wendelstein Tel. 09129 / 2852-0 Fax: 09129 / 2852-11 Web: www.hsshsp.de EMAIL: HSP@hsshsp.de NTG-3000.

HSP GmbH Zum Handwerkerhof 2 90530 Wendelstein Tel. 09129 / 2852-0 Fax: 09129 / 2852-11 Web: www.hsshsp.de EMAIL: HSP@hsshsp.de NTG-3000. NTG-3000 Transducer Data Sheet Document Version 2.8 Page 1 of 10 Versions / Revisions: Document Creation Author Description version date 2.0 2012-07-25 P. Compensis First official version 2.1 2012-08-24

More information

Datasheet of the Easy Servo Motor ES-MH Series

Datasheet of the Easy Servo Motor ES-MH Series Datasheet of the Easy Servo Motor ES-MH Series High Voltage Stepper Motor with Encoder, 8-20 Nm Version 1.4 http://www.leadshine.com Descriptions Leadshine s ES-MH series easy servo motors, or stepping

More information

Programmable set for Ethernet Modbus/TCP in IP67 TI-BL67-PG-EN-2

Programmable set for Ethernet Modbus/TCP in IP67 TI-BL67-PG-EN-2 Type code Ident no. 1545065 Number of channels 2 Dimensions (W x L x H) 108 x 145 x 77.5 mm CoDeSys-programmable acc. to IEC 61131-3 Cable max. 50 m between interface and read/write head 10/100 Mbps Male

More information

Digital input modules

Digital input modules 8 172 TX-I/O Digital input modules TXM1.8D TXM1.16D Two fully compatible versions: TXM1.8D: 8 inputs, each with a three-color LED (green, yellow or red) TXM1.16D: As TXM1.8X, but 16 inputs, each with a

More information

www.sebury.com.cn Digital Keypad Use s Manual

www.sebury.com.cn Digital Keypad Use s Manual K3 K4 www.sebury.com.cn Digital Keypad Use s Manual Contents Introduction Introduction Specifications Intramural Interface Circuit 3 Mounting 3 Wiring 5 Power UP 7 Engineer Programming Mode 7 The K3/K4

More information

OPERATING MANUAL. Table of contents. 2 Phase Stepping Motor Driver 2M542. Rev. A. Introduction page 2. Specifications page 2 Timing chart page 3

OPERATING MANUAL. Table of contents. 2 Phase Stepping Motor Driver 2M542. Rev. A. Introduction page 2. Specifications page 2 Timing chart page 3 2 Phase Stepping Motor Driver 2M542 OPEATING MANUAL Table of contents Introduction page 2 Specifications page 2 Timing chart page 3 Setting page 4 Current set page 4 educe current function page 4 Micro

More information

Preset Counter signo 721

Preset Counter signo 721 Most simple handling Impressive, clearly readable display in 48x48 mm Input frequency up to 60 khz Easy installation due to pluggable terminals TECHNICAL DATA GENERAL Display Height of digits Supply voltage

More information

Cross-beam scanning system to detect slim objects. 100 mm 3.937 in

Cross-beam scanning system to detect slim objects. 100 mm 3.937 in 891 Object Area Sensor General terms and conditions... F-17 Related Information Glossary of terms... P.1359~ Sensor selection guide...p.831~ General precautions... P.1405 PHOTO PHOTO Conforming to EMC

More information

IMR 6000/10../20../30

IMR 6000/10../20../30 IMR 6000/10../20../30 System frame Component of the MMS 6000 Machine Monitoring System Applications: Slots for adaptation of the signal processing periphery (monitors, logic cards and interface cards)

More information

Technical data. General specifications. Indicators/operating means. 30 Hz Multiplex operation 30 Hz / n, n = number of sensors, n 5

Technical data. General specifications. Indicators/operating means. 30 Hz Multiplex operation 30 Hz / n, n = number of sensors, n 5 Model Number Single head system Features Parameterization interface for the application-specific adjustment of the sensor setting via the service program ULTRA 000 programmable switch outputs Hysteresis

More information

www.kem-kueppers.com info@kem-kueppers.com Certified according to DIN EN ISO 9001 Technical Datasheet C-Flow Coriolis Mass Flow Meter

www.kem-kueppers.com info@kem-kueppers.com Certified according to DIN EN ISO 9001 Technical Datasheet C-Flow Coriolis Mass Flow Meter www.kem-kueppers.com info@kem-kueppers.com Certified according to DIN EN ISO 9001 Technical Datasheet C-Flow Coriolis Mass Flow Meter Description The coriolis mass flow meters measure simultaneously mass

More information

How To Use A Flowmeter

How To Use A Flowmeter INLINE flowmeter for continuous flow measurement Economic integration in pipe systems without any additional piping 3-wire frequency pulse version to directly interface with PLC s (both PNP and NPN) Connection

More information

MILE Encoder for EC 90 flat

MILE Encoder for EC 90 flat MILE Encoders Edition October 2014 MILE Encoder for EC 90 flat Encoders Document ID: 1 495 818-06 ag Brünigstrasse 220 P.O.Box 263 CH-6072 Sachseln Phone +41 41 666 15 00 Fax +41 41 666 16 50 www.maxonmotor.com

More information

maxon motor maxon motor control EPOS Positioning Controller Cable Starting Set Edition June 2006 part number 302287 Positioning Controller

maxon motor maxon motor control EPOS Positioning Controller Cable Starting Set Edition June 2006 part number 302287 Positioning Controller control EPOS Positioning Controller Cable Starting Set Edition June 2006 24/1 part number 302287 Positioning Controller Documentation Cable Starting Set 1 Table of contents 1 Table of contents... 2 2 Table

More information

Electronic timer CT-AHD.12 OFF-delayed with 1 c/o (SPDT) contact

Electronic timer CT-AHD.12 OFF-delayed with 1 c/o (SPDT) contact Data sheet Electronic timer CT-AHD.12 OFF-delayed with 1 c/o (SPDT) contact The CT-AHD.12 is an electronic time relay with OFF-delay. It is from the CT-D range. With their MDRC profile and a width of only

More information

DSD 70 Dual Channel Hall Effect Speed Sensor for Railway Applications, compliant with EN 50155

DSD 70 Dual Channel Hall Effect Speed Sensor for Railway Applications, compliant with EN 50155 DSD 70 Dual Channel Hall Effect Speed Sensor for Railway Applications, compliant with EN 50155 Technical information Version: 07.14 General Function The speed sensors family DSD.70 are suitable for generating

More information

Laser diffuse reflection light scanner with background suppression. Dimensioned drawing

Laser diffuse reflection light scanner with background suppression. Dimensioned drawing Specifications and description HRTL 3B Laser diffuse reflection light scanner with background suppression Dimensioned drawing We reserve the right to make changes DS_HRTL3B_en.fm en 01-2010/12 50114049

More information

RISH CON - Hz. Salient Features : Application : Product Features: FREQUENCY TRANSDUCER

RISH CON - Hz. Salient Features : Application : Product Features: FREQUENCY TRANSDUCER Application : The RISH CON - Hz transducer is used for frequency measurement. The output signal is proportional to measured frequency and is either load independent DC Current or load independent DC Voltage.

More information

ZC-24DO CANopen I/O Module: 24 Digital Outputs

ZC-24DO CANopen I/O Module: 24 Digital Outputs Z-PC Line EN ZC-24DO CANopen I/O Module: 24 Digital Outputs Installation Manual Contents: - General Specifications - Technical Specifications - Installation Rules - Electrical connections - DIP-switches

More information

AUTOMATICOS S.L OPTICAL ENCODERS

AUTOMATICOS S.L OPTICAL ENCODERS OPTICAL ENCODERS FACTORY AND OFFICES Prolongación c/ Sant Francesc s/n 17400 Breda (Girona) España Tel.: (00 34) 972 160 017 Fax: (00 34) 972 160 230 E-mail: info@hohner.es Web: www.hohner.es TO FRANCE

More information

OEM Pressure Transmitters for heavy-duty applications, Type MBS 1200 and MBS 1250

OEM Pressure Transmitters for heavy-duty applications, Type MBS 1200 and MBS 1250 MAKING MODERN LIVING POSSIBLE Data sheet OEM Pressure Transmitters for heavy-duty applications, Type MBS 1200 and MBS 1250 The compact OEM pressure transmitter programme is designed for use in severe hydraulic

More information

38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 - 16 A

38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 - 16 A 38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 - 16 A 38 SERIES Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit EMR Electromechanical

More information

SYSTEM DESCRIPTION Termination Boards

SYSTEM DESCRIPTION Termination Boards PROCESS AUTOMATION SYSTEM DESCRIPTION Termination Boards Non-IS Termination Boards for Yokogawa CENTUM C3 and ProSafe RS ISO9001 With regard to the supply of products, the current issue of the following

More information

Encoders. the incremental encoders format such as relective optical technology, transmissive optical technology

Encoders. the incremental encoders format such as relective optical technology, transmissive optical technology the incremental encoders format such as relective optical technology, transmissive optical technology back devices, brakes and gearboxes at no extra cost to you. USA: +1 267 933 2105 Europe: +33 20928751

More information

Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv)

Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv) Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv) Order code Series and function 1) Plug socket see page 5.042. MN-06-310-HN-442 Standard coil 1) 441 = 12 V DC, 4.2 W 442 = 24 V DC,

More information

LED red (-): Measuring value < lower tolerance threshold LED red (+): Measuring value > upper tolerance threshold. Page 1/6

LED red (-): Measuring value < lower tolerance threshold LED red (+): Measuring value > upper tolerance threshold. Page 1/6 L-LAS Series L-LAS-LT-165-CL - Line laser 1 mw, laser class 2 - Visible laser line (red light 670 nm), typ. 2 mm x 3 mm - Reference distance approx. 165 mm - Measuring range typ. 65... 265 mm - Resolution

More information

Description ELGO PNO 1 SSI/ Profibus - Converter

Description ELGO PNO 1 SSI/ Profibus - Converter Description ELGO PNO 1 SSI/ Profibus - Converter GSD- file is provided on cd-rom or disk also for not ELGO products applicable Profibus - interface after IEC61158/IEC61784 SSI interface 24Bit binär codiert

More information

- 1 - Eddy Current. Eddy current distance and displacement transducer

- 1 - Eddy Current. Eddy current distance and displacement transducer - 1 - Eddy Current Eddy current distance and displacement transducer S eries TX Measurement ranges 0,5...10 mm ne or dual-channel device utputs: 10V, 5V, ±5V, (0)4...20 ma, CAN Linearity ±0,25% of FS High

More information

ABB Drives. User s Manual. Pulse Encoder Interface Module RTAC-01

ABB Drives. User s Manual. Pulse Encoder Interface Module RTAC-01 ABB Drives User s Manual Pulse Encoder Interface Module RTAC-0 Pulse Encoder Interface Module RTAC-0 User s Manual 3AFE 64486853 REV A EN EFFECTIVE:.5.00 00 ABB Oy. All Rights Reserved. Safety instructions

More information

ISO 15407-1/2 (VDMA 24563) ISO 02 (18 mm) - ISO 01 (26 mm) Valves

ISO 15407-1/2 (VDMA 24563) ISO 02 (18 mm) - ISO 01 (26 mm) Valves BD ISO 0/ (VDM ) ISO 0 ( mm) ISO 0 ( mm) Valves BDE = solenoid valves ISO 0/ with integrated connection including V DC coils and connector BDB = solenoid valves ISO 0/ with external connection with M connector

More information

COMPALARM AP GENERAL MAIN FEATURES

COMPALARM AP GENERAL MAIN FEATURES GENERAL The COMPALARM AP is a point alarm system, with as many normally closed input contacts. It givesthe possibility of selecting the alarm sequence according with 0 x 0 mm cells, fitted with ultra bright

More information

Description. Specifications and Ordering Information 330400 and 330425 Accelerometer Acceleration Transducers

Description. Specifications and Ordering Information 330400 and 330425 Accelerometer Acceleration Transducers Specifications and Ordering Information 330400 and 330425 Accelerometer Acceleration Transducers R Description These accelerometers are intended for critical machinery applications where casing acceleration

More information

How To Use The Vacon 0 Machinery

How To Use The Vacon 0 Machinery vacon 0 machinery how would you like your ac drive today? easy adaptation for customer requirements The Vacon 0 Machinery is an extremely compact AC drive for machine builders in the power range from 0.25

More information

D.C. Motors. Products and specifications subject to change without notice.

D.C. Motors. Products and specifications subject to change without notice. D.C. Motors Order/Technical Support - Tel: (8) 677-5 / FAX: (8) 677-865 / www.crouzet-usa.com / DC Motors Selection guide Gearbox Speed Torque max (Nm).5. Type of Gearbox 8 8 8. Power usable (w) Torque

More information

Temposonics Magnetostrictive, Absolute, Non-contact Linear-Position Sensors

Temposonics Magnetostrictive, Absolute, Non-contact Linear-Position Sensors Temposonics Magnetostrictive, Absolute, Non-contact Linear-Position Sensors E-Series Model ER Analog and Start/Stop Outputs SENSORS Document Part Number: 550996 Revision E Data Sheet Model ER position

More information

Tubular Analog model resolution: 0,5 mm (SLOW mode), 1 mm (FAST mode) Right angle Repeatibility: 0,7 mm Vdc

Tubular Analog model resolution: 0,5 mm (SLOW mode), 1 mm (FAST mode) Right angle Repeatibility: 0,7 mm Vdc Ultrasonic sensors for high precision detection of clear and transparent objects Clear object detection, inspection on transparent or highly reflective film and liquid level measurement Standard M18 tubular

More information

Set for PROFINET IO in IP20 TI-BL20-EN-PN-4

Set for PROFINET IO in IP20 TI-BL20-EN-PN-4 Cable max. 50 m between interface and read/write head Connection of up to 4 read/write heads via BL ident extension cables Mixed operation of HF and UHF read/ write heads Connectors /S2500 Type code Ident

More information

38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 A

38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 A 38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 A Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit EMR Electromechanical Relays

More information

Duct Humidity Transmitter

Duct Humidity Transmitter SDC-H Duct Humidity Transmitter Features Replaceable sensor element Humidity measurement for air ducts Minimum and maximum value memory 0 0V, 0 0mA or 0V, 4 0mA measuring signals selectable with jumpers

More information

DCP Fan Controller. Version 01/2009. The engineer s choice

DCP Fan Controller. Version 01/2009. The engineer s choice Version 01/2009 The engineer s choice Index Page 1. Introduction... 3 2. Technical specification... 4 3. Connection diagrams... 9 4. Configuration... 10 5. Compatible ebm-papst Fan List... 11 2 1. Introduction

More information

DMP 331. Industrial Pressure Transmitter for Low Pressure. Stainless Steel Sensor

DMP 331. Industrial Pressure Transmitter for Low Pressure. Stainless Steel Sensor DMP Industrial Pressure Transmitter for Low Pressure Stainless Steel Sensor accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 / 0. % FSO from 0... 00 mbar up to 0... 40 bar Output signals

More information

Harmonic Drive acutator P r e c i s i o n G e a r i n g & M o t i o n C o n t r o l

Harmonic Drive acutator P r e c i s i o n G e a r i n g & M o t i o n C o n t r o l D C S e r v o S y s t e m s RH Mini Series Total Motion Control Harmonic Drive acutator P r e c i s i o n G e a r i n g & M o t i o n C o n t r o l Precision Gearing & Motion Control DC SERVO ACTUATORS

More information

Multifunction devices

Multifunction devices devices devices devices, electronic Type Page LED multifunction displays pulse, frequency, time (DC) Codix 524 240 pulse, frequency, time (AC+DC) Codix 544 243 LCD multifunction preset counters 1 or 2

More information

3500/25 Enhanced Keyphasor*Module

3500/25 Enhanced Keyphasor*Module 3500/25 Enhanced Keyphasor*Module Bently Nevada* Asset Condition Monitoring Description The 3500/25 Enhanced Keyphasor Module is a half-height, two-channel module used to provide Keyphasor signals to the

More information

Incremental Rotary Encoder E6B2

Incremental Rotary Encoder E6B2 Incremental Rotary Encoder General-Purpose Rotary Encoder Withstands arge Shaft oads Wide variety of supply voltages and output forms Easy-to-adjust zero index (phase Z) with origin indicating function

More information

DRS61: Incremental encoders, number of lines and zero pulse width freely programmable DRS60: Incremental Encoders with Zero-Pulse-Teach

DRS61: Incremental encoders, number of lines and zero pulse width freely programmable DRS60: Incremental Encoders with Zero-Pulse-Teach RS: Incremental encoders, number of lines and zero pulse width freely programmable RS: Incremental Encoders with Zero-Pulse-Teach Further highlights of this generation of encoders: Simple zero-pulse-teach

More information

0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N

0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N 55 Series - General purpose relays 7-10 A Features 55.12 55.13 55.14 Printed circuit mount, general purpose 2, 3 & 4 Pole relays 55.12-2 Pole 10 A 55.13-3 Pole 10 A 55.14-4 Pole 7 A AC coils & DC coils

More information

HIPERDRIVE HRA71 and HIPER- DRIVE -HUB: Integrated positioning system with absolute distance measurement for format adjustment

HIPERDRIVE HRA71 and HIPER- DRIVE -HUB: Integrated positioning system with absolute distance measurement for format adjustment HIPERDRIVE HRA7 and HIPER- DRIVE -HUB: Integrated positioning system with absolute distance measurement for format adjustment Convincing benefits: Highly integrated system Low cabling requirements: VDC

More information

RM17TE 183...528 V AC. Main. Product or component type. Product specific application. Relay monitored parameters 250 V DC 5 A DC

RM17TE 183...528 V AC. Main. Product or component type. Product specific application. Relay monitored parameters 250 V DC 5 A DC Characteristics multifunction control relay RM17-TE - range 183..528 V AC Complementary Reset time Maximum switching voltage Minimum switching current Maximum switching current [Us] rated supply voltage

More information

I STAR COMPUTER CO., LTD

I STAR COMPUTER CO., LTD I STAR COMPUTER CO., LTD Mini Redundant Power Supply 300W+300W for IPC-Computer Model No. TC-300R8 Table of content 1. Introduction...1 2. Specification 2.1 Input Voltage...1 2.2 DC Output...1 2.3 PS-ON

More information