ISO /2 (VDMA 24563) ISO 02 (18 mm) - ISO 01 (26 mm) Valves
|
|
|
- Daniella Hensley
- 8 years ago
- Views:
Transcription
1 BD ISO 0/ (VDM ) ISO 0 ( mm) ISO 0 ( mm) Valves BDE = solenoid valves ISO 0/ with integrated connection including V DC coils and connector BDB = solenoid valves ISO 0/ with external connection with M connector including V DC coils and connector BD = valves and solenoid valves ISO 0/ (without coils and connectors to be ordered separately) TC TX Serial communication system available for BDE series Modular subbase ISOVDM Subbase with increased capacity TECHNICL CHRCTERISTICS mbient temperature Fluid temperature Fluid Commutation system Ways/Positions 0 0 C max 0 C 0 μm filtered and not dehumidified air, lubricated or not spool //, /, / control = max control = 0 max indirect electro,, pneumo mm =, mm = Nominal Ø (mm) Nominal flow rate (Nl/min) for valves and solenoid valves side mm Subbase in diecast aluminium according to standard Fittings: / / // Ø Ø Nominal flow rate (Nl/min) for valves and solenoid valves side Subbase in diecast aluminium according to standard Fittings: Ø (b) Ø Ø (a) = manifold subbase valve places and end plates with side connections in aluminium and fixing plate for fittings standard supplied with subbase. (b) = manifold subbase valve place and end plates with side connections in aluminium and fixing plate for fittings standard supplied with subbase. (c) = the external Ø of the G / fitting for tube Ø mm must not exceed 0 mm Body valve Cover Seals Subbase ctuators Spool Electropilot Voltage Power consumption Protection degree Manual override / / // Ø CONSTRUCTIVE CHRCTERISTICS ELECTRIC CHRCTERISTICS VDMISO Ø Ø VDMISO Ø (c) Ø Ø Oversize Oversize Ø Ø (c) Ø acetalic resin zamak nitrile rubber diecast alluminium technopolymer aluminium DD series (U0) V DC (± 0%), V DC upon request W IP with button with tool position Flow rate characteristics >> Valves and solenoid valves side mm / Oversize subbase for Ø mm tube Qn (Nl/min) Qn (Nl/min) >> Valves and solenoid valves side mm / Increased subbase for Ø mm tube 0 P = Working pressure P = Supply pressure Qn = Nominal flow rate P () P () P () P () Standardized valves _
2 BD ISO 0/ valves ISO 0 specifications They establish the dimensions of the bearing surface and the minimum distance between two valve places, guaranteeing the interchangeability and possibility to include any valve providing it complies with above specifications. >> Dimensioning of the bearing surface according to ISO 0/ specification with integrated connector Y = Min. distance between two interface axes of the same dimension mounting on the same manifolds U = Position bore, depth V mm mm,, B, D,, E 0 F G G G K,, L min. L min.,, LTE min. 0,, P 0, T M M U,, V W min. X, X,, Y 0 PIN connector Flying female connector Left supply plate G/ Subbase valve places for solenoid valve mm Plate for separating pressures Solenoid valve side mm Fittings according to UNIVER design Closing plate Fixing plate for fittings standard supplied with subbase 0 Intermediate supply plate G/ Interface for connecting valves side / mm Solenoid valve side mm Clamping fork for fittings Subbase valve place for solenoid valve mm Right supply plate G/ _0
3 BD ISO 0/ valves Codification key B D _ D Series Size Type BDE = solenoid valves with integrated connection V DC (including coil and connector) BDB = solenoid valves with integrated connection V DC, with M connector (including coil and connector) = side mm = side mm = / = / c.c. = / o.c. = / p.c. = // NCNC = // NCNO = // NONO Coil voltage = 0 = pneumo = V DC (standard) = = V DC (upon request) = = not Options D = externally servoassisted electropilot B D D Series Size Type BD = valves and solenoid valves (without coil and connectors to be ordered separately) = side mm = side mm = / = / c.c. = / o.c. = / p.c. = // NCNC = // NCNO = // NONO = = only DC = DC and C 0 = pneumo = = not = = only direct current = direct and alternating current = non only direct current = non direct and alternating current Options D = externally servoassisted electropilot Standardized valves >> Coils U0 side mm DD00 DD0 DD00 DD0 DD0 DD00 DD00 Nominal voltage DC v C v 0 0 Frequency HZ 0/0 0/0 0/0 0/0 Power consumption CCW C V rating start rating start,,,,,,,,,,,, LED connector M0/M0 V DC 0/0 Hz It can rotate by 0 on the coil IP cable connection PG o.c. = open centres c.c. = closed centres p.c. = pressurized centre _
4 BDE Solenoid valves with integrated connection Single impulse mm 0, En. Deen. / pneumo BDE0 Manual override /, BDE Double impulse mm 0, En. Deen. Manual override / 0, BDE / c.c., BDE / o.c., BDE / p.c., BDE / NC / NC BDE / NC / NO BDE / NO / NO BDE o.c. = open centres c.c. = closed centres p.c. = pressurized centres _
5 BDE Solenoid valves with integrated connection Single impulse mm 0,0 En Deen. / pneumo 0 BDE0 Manual override /, 0 0 BDE Double impulse mm 0, En. Deen. / / c.c. / o.c. / p.c. 0,,,, BDE BDE BDE BDE Manual override Standardized valves / NC / NC 0 BDE / NC / NO 0 BDE / NO / NO 0 BDE o.c. = open centres c.c. = closed centres p.c. = pressurized centres _
6 BDB Solenoid valves with M connector Single impulse mm 0, En. Deen. Manual override / pneumo BDB0 /, BDB Double impulse mm 0, Manual override / / c.c. / o.c. / p.c. 0,,,, En. Deen. BDB BDB BDB BDB ELECTRIC FETURES Central connector Mx IP protection degree V DC voltage, W nominal power DD0** series coil (without faston) ED 00% LED indicator vailable upon request other voltages max V DC / NC / NC BDB L R VDR VDR R L () () LTO LTO () / NC / NO BDB / NO / NO BDB o.c. = open centres c.c. = closed centres p.c. = pressurize centres _
7 BDB Solenoid valves with M connector Single impulse mm 0,0 En. Deen. Manual override / molla pneumo 0 BDB0 / molla, 0 0 BDB Double impulse mm 0, Manual override / / c.c. / o.c.,,, En. Deen. BDB BDB BDB ELECTRIC FETURES Central connector Mx IP protection degree V DC voltage, W nominal power DD0** series coil (without faston) ED 00% LED indicator / p.c., BDB vailable upon request other voltages max V DC / NC / NC 0 BDB L R VDR VDR R L () () LTO LTO () / NC / NO 0 BDB / NO / NO 0 BDB o.c. = open centres c.c. = closed centres p.c. = pressurize centres
8 BD ISO 0/ valves and solenoid valves Single impulse mm 0,0 En. Deen. Manual override / pneumo BD0 /, BD Double impulse mm 0, En. Deen. Manual override / 0, BD / c.c., BD / o.c., BD / p.c., BD / NC / NC BD / NC / NO BD / NO / NO BD o.c. = open centres c.c. = closed centres p.c. = pressurized centres BD solenoid valves are supplied without coils and connectors _
9 BD ISO 0/ valves and solenoid valves Single impulse mm 0, En. Deen. Manual override / pneumo 0 BD0 /, 0 0 BD Double impulse mm 0, En. Deen. Manual override / / c.c. / o.c. / p.c.,,,, BD BD BD BD Standardized valves / NC / NC 0 BD / NC / NO 0 BD / NO / NO 0 BD o.c. = open centres c.c. = closed centres p.c. = pressurized centres BD solenoid valves are supplied without coils and connectors _
10 BD ISO 0/ valves and solenoid valves Single/double impulse mm 0,0/0,0 En. Deen. / pneumo, 0 0 BD0 /, 0 BD / 0, 0 BD / c.c., 0 BD / o.c., 0 BD / p.c., 0 BD / NC / NC, 0 BD / NC / NO, 0 BD / NO / NO, 0 BD o.c. = open centres c.c. = closed centres p.c. = pressurized centres _
11 BD ISO 0/ valves and solenoid valves Single/double impulse mm 0,/0,0 En. Deen. / pneumo, 0 BD0 /, 0 BD /, BD / c.c., 0 BD / o.c., 0 BD / p.c., 0 BD / NC / NC, 0 BD / NC / NO, 0 BD / NO / NO o.c. = open centres c.c. = closed centres p.c. = pressurized centres, 0 BD Standardized valves _
12 BDE Manifold subbases Integrated connection side mm B D C 0 Flying female connector Male connector Left supply plate G/ Fixing plate for fittings Straight fittings Plate for separating pressures Integrated connection Intermediate supply plate G/ Solenoid vale side mm Closing plate Subbase valve places Right supply plate G/ 0 Valve thickness B Subbase places valve C Closing plate for unused valve place BDF D Intermediate supply plate = Supply port = Use = Exhaust = = N = Number of valve places BDF00 BDF BDF0 BDF0TIM BDF0 BDF BDF0 left supply plate G/ with integrated connection weight: 0, Kg BDF0 (b) right supply plate G/ weight: 0, Kg intermediate supply plate G/ with integrated connection weight: 0, Kg BDF0 multiway connection module, poles male type D side mm weight: 0, Kg BDF0 (a) (b) (b) BDF0 (a) (b) plate for separating supply pressures weight: 0,00 Kg BDF00 plate for closing unused valve place weight: 0,0 Kg GZR00 interface for connecting valves side mm with integrated connection weight: 0, Kg GZRV000/0/0 sub base places according to VDMISO specifications flow rate 0 Nl/min G/ connections weight: 0, Kg _0 sub base places according to VDMISO specifications flow rate 0 Nl/min for fittings Ø mm weight: 0, Kg sub base places with increased capacity 00 Nl/min G/ connections weight: 0, Kg (a) = subbase including fixing plates for fittings (fittings excluded) sub base places with increased capacity 00 Nl/min for fittings Ø mm weight: 0, Kg single subbase place with increased capacity G/ connections weight: 0, Kg (b) = part no. codification: 0 = integrated screw plug weight: 0,0 Kg fittings according to UNIVER design (package 0 pcs.) GZRV000 Ø mm GZRV000 Ø mm GZRV000 Ø mm weight: 0,0 Kg each.
13 BDE Manifold subbases Integrated connection side mm B D C 0 Flying female connector Male connector Left supply plate G/ Clamping fork for fittings Straight fittings Plate for separating pressures Integrated connection Intermediate supply plate G/ Solenoid vale side mm Closing plate Subbase valve place Right supply plate G/ BDF00 BDF BDF0 BDF0TIM 0 BDF0 Valve thickness B Subbase place valve C Closing plate for unused valve place BDF D Intermediate supply plate = Supply port = Use = Exhaust = = N = Number of valve place BDF Standardized valves left supply plate G/ with integrated connection weight: 0, Kg right supply plate G/ weight: 0, Kg intermediate supply plate G/ with integrated connection weight: 0, Kg multiway connection module, poles male type D side mm weight: 0, Kg plate for separating supply pressures weight: 0,00 Kg plate for closing unused valve place weight: 0,0 Kg BDF0/0 (b) BDF0 (a) (b) BDF0/0(b) BDF0//(a) (b) BDF00 GZRVV00/0/0 sub base place according to VDMISO specification flow rate 0 Nl/min G/ connections BDF0 weight: 0, Kg G/ connections BDF0 weight: 0, Kg sub base place according to VDMISO specification flow rate 0 Nl/min for fittings Ø 0 mm BDF0 weight: 0, Kg (a) = subbase including fixing plates for fittings (fittings excluded) sub base place with increased capacity flow rate 00 Nl/min G/ connections BDF0 weight: 0, Kg G/ connections BDF0 weight: 0, Kg sub base place with increased capacity flow rate 00 Nl/min for fittings Ø 0 mm BDF0 weight: 0, Kg (b) = part no. codification: 0 = integrated single subbase place with increased capacity G/ connections weight: 0, Kg fittings according to UNIVER design (package 0 pcs.) GZRVV00 Ø mm GZRVV00 Ø mm GZRVV00 Ø 0mm weight: 0,0 Kg each. _
14 BD BDB Manifold subbases Electric connection with external connector side mm B D C Valve thickness B Subbase places valve C Closing plate for unused valve place BDF D Intermediate supply plate Left supply plate G/ Solenoid valve Straight fittings Plate for separating pressures Fixing plate for fittings Intermediate supply plate G/ Closing plate Subbase valve places Right supply plate G/ = Supply port = Use = Exhaust = = N = Number of valve places BDF0 BDF BDF BDF0 BDF BDF BDF00 left supply plate G/ weight: 0, Kg right supply plate G/ weight: 0, Kg intermediate supply plate G/ without integrated connection weight: 0, Kg plate for separating pressures weight: 0,00 Kg plate for closing unused valve place weight: 0,0 Kg interface for connecting valves side mm with integrated connection weight: 0, Kg GZRV000// single subbase place with increased capacity G/ connections weight: 0, Kg BDF0// (b) BDF0// (a) (b) BDF0// (b) BDF0// (a) (b) GZR00 DD0/.. sub base places according to VDMISO specifications flow rate 0 Nl/min G/ connections BDF0 BDF BDF weight: 0, Kg sub base places according to VDMISO specifications flow rate 0 Nl/min for fittings Ø mm BDF0 BDF BDF weight: 0, Kg sub base places with increased capacity 00 Nl/min attacchi G/ BDF0 BDF BDF weight: 0, Kg sub base places with increased capacity flow rate 00 Nl/min for fittings Ø mm BDF0 BDF BDF weight: 0, Kg screw plug weight: 0,0 Kg fittings according to UNIVER design (package 0 pcs.) GZRV000 Ø mm GZRV000 Ø mm GZRV000 Ø mm weight: 0,0 Kg cad. U0 coil side mm (for technical features refer to section ccessories>coils ) weight: 0,0 Kg (a) = subbase including fixing plates for fittings (fittings excluded) (b) = part no. codification: 0 = integrated = non integrated =only _
15 BD BDB Manifold subbases Electric connection with external connector side mm B C D Valve thickness B Subbase places valve C Closing plate for unused valve place BDF D Intermediate supply plate Left supply plate G/ Solenoi valve Straight fittings Plate for separating pressures Fixing plate for fittings Intermediate supply plate G/ Closing plate Subbase valve place Right supply plate G/ BDF0 BDF BDF BDF0 BDF = Supply port = Use = Exhaust = = N = Number of valve places BDF00 left supply plate G/ weight: 0, Kg right supply plate G/ weight: 0, Kg left supply plate G/ without integrated connection weight: 0, Kg plate for separating supply pressures weight: 0,00 Kg plate for closing unused valve place weight: 0,0 Kg single subbase place with increased capacity G/ connections weight: 0, Kg Standardized valves BDF0/.. (b) BDF0// (a) (b) BDF/.. (b) BDF0// (a) (b) GZRVV00//0 DD0/.. sub base place according to VDMISO specification flow rate 0 Nl/min G/ connect. G/ connect. BDF0 BDF0 BDF BDF BDF BDF sub base place according to VDMISO specification flow rate 0 Nl/min for fittings Ø 0 mm BDF0 BDF BDF weight: 0, Kg sub base place with increased capacity 00 Nl/min G/ connect. G/ connect. BDF0 BDF0 BDF BDF BDF BDF weight: 0, Kg weight: 0, Kg sub base place with increased capacity 00 Nl/min for fittings Ø 0 mm BDF0 BDF BDF weight: 0, Kg fittings according to UNIVER design (package 0 pcs.) GZRVV00 Ø mm GZRVV00 Ø mm GZRVV00 Ø 0mm weight: 0,0 Kg cad. U0 coil side mm (for technical features refer to section ccessories>coils ) weight: 0,0 Kg (a) = subbase including fixing plates for fittings (fittings excluded) (b) = part no. codification: 0 = integrated = non integrated = only _
16 BD Connection modules and flying connectors table of connections Electric connection M0 TSCFNS000 TSCFNS000 TSCFNS000 TSCFNS000 TSCFND000 TSCFND000 TSCFND000 mm connector BDF0 TIM famale connector poles type Dsub no cable M x fixing screws BDF0 TIM famale connector poles type Dsub cable 0 m M x fixing screws male/famale flying connector sub D (upon request) prewired for coils with cable Ø mm (0 m lenght) suitable for mobile laying M x fixing screws multiway connection module poles male type D side mm multiway connection module poles male type D side mm >>Colour identification according to standard DIN 00 Female connector DSUB poles for connection coils PIN No. side Valve N Colour Coil white brown green yellow grey pink blue red black violet greypink redblue whitegreen greenbrown whiteyellow yellowbrown whitegrey greybrown whitepink pinkbrown whiteblue brownblue whitered brownred brownblack shield whiteblack 0 0 common low _
zamak nitrile rubber selfestinguishing technopolymer aluminum B10 24 V DC (± 10%) holding 0,32 W, pick-up 5,5 W (25 ms) IP65 button with tool
P0 0mm COMPCT valves - threaded body and for sub-base mounting - Low standard power consumption (0,W): low power consumption electropilot B0 (standard version with LED) - Quick response times - High flow
zamak nitrile rubber self-extinguishing technopolymes aluminum
G 0 mm - G / Valves and solenoid valves - G/ threaded valve body with traditional Univer spool system - Version with integrated connection and esternal connection - Compact design - High flow rate - Versions
zamak nitrile rubber self-extinguishing technopolymer aluminum
PS COMBOBOX valves - Valves with compact design: valve body with integrated sub-base - High flexibility: > possibility of choosing fitting dimension (--) according to users needs > manifolds from up to
size 3 15 4200 size 4 19 6600
BE/BE ISO 99/ Valves - Compliance with ISO 99/ international standards - Full range: - - - size - Two different internal commutation system: mixed and spool, appreciated for decades thanks to their maximum
-10 +45 C 50 μm filtered air, with or without lubrication spool 10 bar G/18 G1/4 6,5 8,5 890
CL/CM UNIVERSAL Valves G1/8 - CHARACTERISTICS -10 +45 C 50 μm filtered air, with or without lubrication spool 10 bar G/18 6,5 8,5 890 1480 die-cast zamak (G1/8), aluminium () NBR aluminium AA series/u1-u,5
Single sub-base valve
solenoid valves Mini-valves 10 mm Electrical connection... Mounting... Port sizes... Rated temperature... Fluid... Working pressure... Nominal flow... Pneumatic connections Voltage... Power... NC poppet
indirect electro-pneumatic, pneumatic, manual, mechanical pneumatic spring, mechanical spring G1/8 6,5 890
L-M UNVRSL istributors / - / - UNVRSL Modular System: possibility to create a lot of different valves with a short number of basis elements - ontrol: manual, mechanical,, electric - Traditional UNVR spool
Electro-pneumatic control valves
Electropneumatic control valves 7 Miniature solenoid valves for alternating current Conform to the Low Voltage Directive or mounting on subbase or footprint in accordance with CNOMO recoendation E 066120N
G1/4 Q8. Standard with biased position
Contents Version Actuation Page Characteristics Dimensions x / Way Valves pneumatic 6,7, 0 9 electric 6,7 9, 9 / Way Valves pneumatic 6,7, 0 electric 6,7, 0 / Way Valves pneumatic 6,7,, 6, 7 electric 6,7,,
TECHNICAL DATASHEET Incremental Encoder RI 58-D / RI 58TD
Direct mounting without coupling Flexible hollow shaft design up to diameter 4 mm Through hollow shaft or as end shaft (blind shaft) Easy installation by means of clamping shaft or blind shaft Short overall
type V46, solenoid or pneumatic operated
SPECIFICATION general type of construction spool valve operator solenoid or pneumatic operated or by manual override. Manual override is equipped with a monostable function (push) and a bistable function
Housing diameter Shaft diameter 1. Flange (Mounting of housing) Protection class shaft input (EN 60529) Protection class housing (EN 60529)
Direct mounting without coupling Flexible hollow shaft design up to diameter 4 mm Through hollow shaft or as end shaft (blind shaft) Easy installation by means of clamping shaft or blind shaft Short overall
6 mm (Synchronus flange) 10 mm (Clamp flange) 10 / 12 mm (Plug shaft) axial 40 N, radial 60 N (10, 12 mm Shaft) Operating speed 10 000 min -1
Absolut Encoder BC 58 Singleturn / Multiturn short cicurit-proof Parallel, SSI, Profibus DP, Interbus (K2) (K3) DeviceNet, CAN, CANopen, Mechanical Specifications: (Synchronus flange) (Clamp flange) 10
SOLENOID VALVES AND PNEUMATIC VALVES
2 A S E R I E S Catalogue 2005-2006 Directly operated solenoid valves Series A 2/2 way, 3/2 way monostable, bistable (with magnetic memory) Ports M5,, cartridge ø4 The Series A solenoid valves are of the
Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv)
Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv) Order code Series and function 1) Plug socket see page 5.042. MN-06-310-HN-442 Standard coil 1) 441 = 12 V DC, 4.2 W 442 = 24 V DC,
Line-Mounted Valves L Series
Spare Part Kit for Valve Series B1LSAD3 Line-Mounted L Series Accessories Spare Part Kits All Series Valve Series B1LSAD3 40.1609 Incl. O-rings, gaskets, spring or muffl er Spare Part Kit for Valve Series
4/2-Way Pneumatic Solenoid Valve
4/2-Way Pneumatic Solenoid Valve Robust servo assisted piston valve Service friendly manual override Single or block assembly Explosion-proof versions Type 5413 cam be combined with Type 2508 Cable plug
VP23, 3-way proportional pressure control valves Seat valve with μp-driven pressure control
VP, -way proportional pressure control valves > > Port size: G/... G/ > > All-digital control electronics > > Variable pressure control > > Optional actuation via fieldbus (separate datasheet on request)
Proportional pressure regulators VPPE
Proportional pressure regulators VPPE Proportional pressure regulators VPPE Product range overview Function Version Pneumatic connection Proportional pressure regulator Nominal size for pressurisation/
INDUSTRIAL AUTOMATION CONNECTOR SYSTEMS
INDUSTRIAL AUTOMATION CONNECTOR SYSTEMS CONNECTING TOMORROW'S TECHNOLOGY, TODAY. 2 BRAD HARRISON AND MPM CONNECTOR SYSTEMS Brad Harrison originally started manufacturing moulded connectors in 1946 for
97300 NAMUR series, 3/2 & 5/2 Indirect solenoid actuated spool valve
9700 NAMUR series, / & / > > Port size: G/, / NPT, NAMUR Interface > > Crossover-free switching > > Main application: Single and double acting actuators > > / way valve usable as / way valve > > Manual
Cable Plug acc. to DIN EN 175301-803, Form A
Cable Plug acc. to DIN EN 175301-803, Form A Complete program Contact form 18 mm Also available with LED indicator Optional 4-pin version for pressure switch or impulse valves respectively Versions with
Electrically operated valves Series M-05, 3/2-, 5/2- and 5/3-way G1/8 650 and 750 Nl/min (0.661 and 0.762 Cv)
Electrically operated valves Series M-05, 3/2-, 5/2- and 5/3-way G1/8 650 and 750 Nl/min (0.661 and 0.762 Cv) Order code Series and function M-05-310-HN-442 Standard coil HN at ports 2 + 4 HN at ports
TECHNICAL DATASHEET Incremental Encoder RI 58-O / RI 58-T
Universal industry standard encoder Up to 40 000 steps with 0 000 pulses High signal accuracy Protection class up to IP67 Flexible due to many flange and configuration variants Suitable for high shock
3/2-way Solenoid Valve, direct-acting, NC or NO
3/2-way Solenoid Valve, direct-acting, NC or NO Electrical connection cable plug, Form A With or without manual override as standard Threaded port and sub-base s Impulse optional Type 6014 can be combined
maxon motor maxon motor control EPOS Positioning Controller Cable Starting Set Edition June 2006 part number 302287 Positioning Controller
control EPOS Positioning Controller Cable Starting Set Edition June 2006 24/1 part number 302287 Positioning Controller Documentation Cable Starting Set 1 Table of contents 1 Table of contents... 2 2 Table
Assisted lift operated 2/2-way solenoid valves Type EV250B
MAKING MODERN LIVING POSSIBLE Data sheet Assisted lift operated 2/2-way solenoid valves Type EV250B EV250B with assisted lift can operate from zero and up to 10 bar differential pressure. This 2/2-way
SOLENOID VALVES 3-4 WAY
SOLENOID VLVES - WY IE/C// CT: FP/VCR Page: 7 SHEET: / SOLENOID VLVES - - WY CV SOLENOID VLVES -WY/-POSITION /- UNF.7 5.7 The electric valve is a -way -position directional electrically controlled Slight
LED red (-): Measuring value < lower tolerance threshold LED red (+): Measuring value > upper tolerance threshold. Page 1/6
L-LAS Series L-LAS-LT-165-CL - Line laser 1 mw, laser class 2 - Visible laser line (red light 670 nm), typ. 2 mm x 3 mm - Reference distance approx. 165 mm - Measuring range typ. 65... 265 mm - Resolution
On-off valves MS-EM/EE, MS series, NPT
On-off valves MS-EM/EE, MS series, NPT On-off valves MS9-EM, MS series, NPT Peripherals overview 5 3 4 aa -H- Note Additional accessories: Module connector for combinations with size MS6, MS9 or size MS12
HSP GmbH Zum Handwerkerhof 2 90530 Wendelstein Tel. 09129 / 2852-0 Fax: 09129 / 2852-11 Web: www.hsshsp.de EMAIL: HSP@hsshsp.de NTG-3000.
NTG-3000 Transducer Data Sheet Document Version 2.8 Page 1 of 10 Versions / Revisions: Document Creation Author Description version date 2.0 2012-07-25 P. Compensis First official version 2.1 2012-08-24
5 Port Pilot Operated Solenoid Valve Rubber Seal. Specifications Fluid Operating pressure range. 2 position single/3 position 2 position double
For details about certified products conforming to international standards, visit us at www.smcworld.com. 5 Port Pilot Operated Solenoid Valve Rubber Seal Series VF3000 Compact and lightweight: 26.4 mm
Fluid. Flu. Fluid Fluid. uid Power d Power P. Fluid Power P. Fluid Power. Fluid Power Power. d Power. Directional Cetop Valves DCV 03.
Catalogue Directional Cetop Valves DCV 03 Power Flu uid Power d Power P wer Power Power Power Power Power d Power Power Power ower Power Power wer Power Power P Power Power Powe d Power Power Power Power
TECHNICAL DATASHEET Incremental Encoder RI 80-E
Incremental 30-45 hollow shaft Rugged mechanical design Unbreakable disc Integrated diagnostic system Wide voltage range DC 5-30 V Isolated shaft NUMBER OF PULSES 1024 / 2048 / 2500 / 4096 / 5000 / 10000
3/2-way Mini Solenoid Valve
3/2way Mini Solenoid Valve Directacting 0... bar DN mm... DN mm,,, subbase, banjobolt connection 21mm coil spacing when mounted on manifold Type can be combined with... Type 20 Type 207 Type able plug
ABSOLUTE OPTICAL ROTARY ENCODER MULTITURN BIT PARALLEL
Main Features - Compact and Heavy-Duty Industrial Model - Interface: Bit Parallel, Push Pull, Short Circuit Proof - Input: Preset (optional) and Latch - Housing: 58 mm - Shaft: 6 or 10 mm Hollow- 15 mm
2/8.10.01. These vacuum switches are used in measuring ranges between -1 and 0 bar.
CATALOGUE > Release 8.5 > Electronic vacuum switches Series SWM Electronic miniature vacuum switches Series SWM These vacuum switches are used in measuring ranges between -1 and 0 bar. Small dimension
UM/22000 5/2 or 5/3 Solenoid and air pilot actuated soft spool valves
U/ / or / > > Sub-base mounted, 99- s,, or > > Steel reinforced main seals > > Low power coils (,W) > > Wide range of sub-bases and accessories > > 6 bar and bar NOO solenoid pilots with locking or non-locking
Instructions for use Valve terminal RE-26. Version: 1006 Art.-Nr.: 54-RE-26-GB
Instructions for use Valve terminal RE-26 Version: 1006 Art.-Nr.: 54-RE-26-GB 1 Symbols.................................................... 3 1.1 Warning notes...........................................
REGTRONIC OPERATING INSTRUCTIONS
REGTRONIC OPERATING INSTRUCTIONS 1.FEATURES Electrical connection: M12 8-pin connector Preset pressure range 0.05-10 bar with possible full scale regulation. 10 100 mbar adjustable deadband Supply pressure:
SPOOL & SLEEVE VALVES solenoid air operated monostable / bistable function threaded ports G 1/8-G 1/4
SPOO & SV VAVS monostable / bistable function threaded ports -G 1/ 5/-5/3 Series 1 FATURS Reliability: steel spool & sleeve technology with long service life Robust valve design, particularly recommended
3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve
3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve Type 6518 Type 6519 Type 6518/6519 can be combined with... Single or block mounting Suitable for outdoor and chemical atmospheres Suitable for
RPE3-04. Functional Description HA 4014 10/2010. Directional Control Valves Solenoid Operated. Replaces HA 4014 12/2007
Directional Control Valves Solenoid Operated RPE3-04 Size D 04 (02) 320 bar (4600 PSI) 30 L/min(8.0 GPM) HA 4014 10/2010 Replaces HA 4014 12/2007 4/3-, 4/2- way directional control valves with solenoid
TECHNICAL DATASHEET Incremental Encoder RI 58-H
Through hollow shaft High accuracy by means of integrated flexible coupling Safe shaft mounting Applications: textile machines, motors, drives, copiers NUMBER OF PULSES 1 / 2 / 3 / 4 / 5 / 10 / 15 / 20
L-LAS-TB-CL serie. laser light curtains for inline measuring tasks
L-LAS-TB-CL serie laser light curtains for inline measuring tasks Maximum distance 2.000 mm Measurement range 6 up to 98 mm Resolution up to 4 µm up to 1,5 khz scan rate 0-10 V or 4-20 ma analogue output
3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics
3/2-, 5/2-5/3-way Solenoid Valves for process pneumatics Type 6518 stard High flow-rate capacity Reduced power consumption Single or manifold mounting stard Type 6518/6519 can be combined with... Stard-,
+ Incremental interface
i IEH58-INC-1-GB-1 04/12 Revision 01 010101-00589999-9999 + Incremental interface + Type with hollow through shaft + Modular product line + Extensive parameter setting possibilities + Special parameters
IP40 or IP64 (EN 60529) Protection class housing. IP50 (IP65 optional) (EN 60529) Minimum length of mountig
Through hollow shaft Ø 5 bis 4 mm Outside diameter only 76 mm Easy installation by means of clamping ring front or rear Operating temperature up to 00 C Applications: motors, printing machines, lifts NUMBER
3/2 Solenoid Cartridge Valve, Size 6
/ Solenoid Cartridge Valve, Size 6 Q max = l/min, p max = 5 bar Bidirectional seat-valve shut-off, direct acting Guided valve spool and poppet Two spool variants are available Available in two mounting
E4E PILOT OPERATED DIRECTIONAL CONTROL VALVE WITH ELECTRIC PROPORTIONAL CONTROL SERIES 51
83 300/100 ED E4E PILOT OPERATED DIRECTIONAL CONTROL VALVE WITH ELECTRIC PROPORTIONAL CONTROL SUBPLATE MOUNTING CETOP P05 p max 250 bar Q max (see specification table) MOUNTING INTERFACE OPERATING PRINCIPLE
Combi switchbox with integrated 3/2 way pilot valve
H Combi switchbox with integrated 3/2 way pilot valve Construction The GEMÜ combi switchbox with integrated 3/2 way pilot valve for pneumatically operated quarter turn actuators has a micro-processor controlled
Valves. Sub-Base Mounted Valves to ISO 5599/2
Valves Sub-Base Mounted Valves to ISO 5599/2 General Information ISO 1, ISO 2 and ISO 3 valve series incorporate the famous Numatics lapped spool and sleeve for ultimate service life. Due to the great
3 Port Solenoid Valve
ubber Seal ort Solenoid Valve Series SYJ00/00/700 [Option] SYJ VQZ V VG Improved pilot valve ilot valve cover is stronger using stainless steel. Mounting thread is also reinforced from size M1.7 to M.
400 Series Buccaneer BUCCANEER POWER. bulgin
bulgin BUCCANEER FOR POWER Contact Retainer Sealing Gasket O Ring Contacts Locking Ring Retaining Nut Panel Body Contacts Contact Carrier O Ring Main Body Cable Gland Collet Gland Nut Sealed to IP68 when
3/2- and 2/2-way cartridge valve type BVE
3/2- and 2/2-way cartridge valve type BVE for any flow direction, zero leakage, all ports pressure resistant Flow Q max = 70 lpm Perm. pressure p max = 400 bar Additional valves with same function: ' Type
Fluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TS
Fluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TS up to size 381; to PN 0.5; to T = 80 C 1. Description 1.1. General FSA fluid level gauges, FSK fluid level sensors and TS temperature
Accessories. Problem solutions from a single source. Our wide range of accessory modules completes the encoder programme.
Accessories Problem solutions from a single source. Our wide range of accessory modules completes the encoder programme. With these modules, we offer you an optimum means of meeting your application demands.
2011 DC Electropumps Bull. Rotation Ø 15 6,45 3,5 5,7
Ø 5 ±. DC Electropumps Bull,5 Rotation,5 5,7 Email: sales@hydronit.com Fax B... Electro pumps Bull series MODEL CODE EPB,5 DC /S5 K, V** Electro Pump Bull series Gear pump displacement (cc/rev (see tables
0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N
55 Series - General purpose relays 7-10 A Features 55.12 55.13 55.14 Printed circuit mount, general purpose 2, 3 & 4 Pole relays 55.12-2 Pole 10 A 55.13-3 Pole 10 A 55.14-4 Pole 7 A AC coils & DC coils
3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve
3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve Type 6518 Type 6519 Type 6518/6519 can be combined with... Single or block mounting Suitable for outdoor and chemical atmospheres Suitable for
System 8. ü www.nassmagnet.com ( +49 511 6746-0. System 8
System 8 ü www.nassmagnet.com ( +9 11 7-0 System 8 The name System 8 stands for a modular system of solenoid coils, armature systems, solenoid operators and solenoid valves. The diameter of the armatures
Series 7500 Torque Sensor
Properties PTO (Power Take-Off) shaft with integrated torque and angle measurement Non-contact measurement system, high robustness Plug & Play solution, no additional electronics required Performance Measurement
2 WAY (2/2) AND 3 WAY (3/2) BRASS AND STAINLESS STEEL SOLENOID VALVES
2 WAY (2/2) AND 3 WAY (3/2) BRASS AND STAINLESS STEEL SOLENOID VALVES DIRECT ACTING Brochure N-289 SPECIFICATIONS Port Size: 1/8 and1/4 Solenoid Valve for air, oil, water and other fluids Flow Direction:
Coils - Connectors. Coils Connectors. Summary. RE 18325-90/03.16 Replaces: RE 18325-90/07.15. Description
1/22 Replaces: RE 18325-90/07.15 Coils Connectors Summary Description Page Description Page Coils Coil S8-356 - CLASS H - 20 W 2-3 Coil S8-356 - CLASS H - 17 W 4 Coil S8-356 - CLASS H - 17 W - LISTED UL
I.T. 6430. BSV-N series 25 ELECTROMECHANICAL TURRETS 09-08 TECHNICAL INFORMATION ISSUED
series 25 ELECTROMECHANICAL TURRETS TECHNICAL INFORMATION I.T. 643 GB The data given in the I.T. are subject to technical modifications without notice. ISSUED 9-8 WORKING PRINCIPLE Water-proof housing
3 Port Solenoid Valve
Port Solenoid Valve Series V00 Rubber Seal Power consumption 0. W (with power saving circuit) VV0 VV00 V00 -V F VS temperature rises: C (with power saving circuit) Sonic conductance Series Standard Large
Valve systems Base plates, according to standard ISO 5599-1. Brochure
ISO 5599-1 Brochure 2 ISO 5599-1 Single subbase Single subbase, thread connections on the side standard: ISO 5599-1 Frame size: ISO 1 - ISO 4 compressed air connection output: G 1/4 - G 1 Reversed pressure
How To Control A Power Supply With A Mini Transmitter And Switch (Power Supply)
transmitter (2 wire) / switch for continuous or On/Off Control Indication, monitoring, transmitting and continuous or On/Off control in one device Output signal 4...20 ma, 2-wire for continuous control
Product Information. Gateway For Connecting EnDat Encoders to PROFIBUS-DP
Product Information Gateway For Connecting EnDat Encoders to PROFIBUS-DP April 2012 PROFIBUS Gateway For Connecting EnDat Encoders Encoders with EnDat interface for connection via gateway All absolute
Contactless Encoder RI360P0-QR24M0-INCRX2-H1181
Compact, rugged housing Many mounting possibilities Status displayed via LED Immune to electromagnetic interference 1024 pulses per revolution (default) 360, 512, 1000, 1024, 2048, 2500, 3600, 4096, parametr.
ABLOY DA60 SWING DOOR OPERATOR Installation and commissioning manual Abloy Oy An ASSA ABLOY Group company APPROVALS / STANDARDS Low Voltage directive 7//EEC as amended by the directive 9/68/EEC EMC directive
0.35 0.9. 3 Port Solenoid Valve. Series VQZ100/200/300. Compact, High Flow. Power consumption: 0.35 W/0.9 W SYJ VQZ VP VG VP3
Port Solenoid Valve 00/00/00 Metal Seal Rubber Seal 0. 0.9 (Standard) (High pressure type, High speed response type) Power consumption: 0. W/0.9 W Compact, High Flow Body ported Base mounted 00 00 00 00
Proportional relief valves type AGMZO-TERS, AERS two stage, with integral or remote pressure transducer, ISO 6264 size 10, 20 and 32
www.atos.com Table F040-1/E Proportional relief valves type AGMZO-TERS, AERS two stage, with integral or remote pressure transducer, ISO 6264 size 10, 20 and 32 AGMZO are two stage poppet type proportional
2.12. page 223 2.12. Products for Explosion hazardous Environment
2.12 page 223 2.12 Products for Explosion hazardous Environment Non-electric valves for explosion 2.12.1 page 224 hazardous environment The following manually and mechanically actuated valves are available
10 mm Solenoid Valves. 0,6 W Power Consumption. 10,5 mm wide. 230 l/min air-flow. Service friendly design. High quality solenoid system
10 mm Solenoid Valves 0,6 W Power Consumption 230 l/min air-flow 10,5 mm wide Service friendly design High quality solenoid system Table of Contents page 2 page 5/2 way in-line valves 3 MMD 510 301 24DC
Inrush Apparent power (VA) Flow Characteristics/Weight. Port size Rc. Valve model VS3115-01 VS3115-02 VS3110-02 VS3110-03 VS3114-00.
Port Direct Operated Solenoid Valve Series VS5/0 Metal Seal Multiple pressure supply is possible with balanced spool sleeve. Any given port can accept high or low pressure supply without affecting the
Field bus connections Link structure CMS link structure CMS, B-design. Brochure
link structure CMS, B-design Brochure 2 link structure CMS, B-design Bus coupler with driver Optional field bus connection with I/O function (CMS), B-design Bus coupler with driver Field bus protocol:
Sensors. Sensors. All Cylinders. Specifications. Features: Features Type REED HALL EFFECT NPN or PNP. Ø8mm - 125mm
Specifications Features Type REED HALL EFFECT NPN or PNP Applicable Series Configurations Construction Materials Body Mounting Bracket Cable Characteristics Operating Temperature Accuracy All Cylinders
D660 Series Servo-Proportional Control Valves with Integrated Electronics ISO 4401 Size 05 to 10
D660 Series Servo-Proportional Control Valves with Integrated Electronics ISO 4401 Size 05 to 10 OVERVIEW D660 Section Page MOOG SERVO-PROPORTIONAL CONTROL VALVES Overview 2 3 Technical Data 4 5 Electronics
Solenoid/pneumatic valves, Tiger Classic
Solenoid/pneumatic valves, Tiger Classic Electrically or pneumatically actuated valves With internal or external pilot air Sturdy and reliable Specified types in accordance with ATEX directive for potentially
Standard Specifications Model. How to Order. Mist spray unit. Recommended Equipment. Mixing valve
Mist Spray Unit Series MU/ Intermittent spray to cutting and press gear chains, etc. Standard Specifications MU MU Inlet air Oil tank set range. MPa. to. MPa Oil tank capacity (cm ) Total capacity: Effective
Coils - Connectors. Coils Connectors. Summary. RE 18325-90/12.10 1/10 Replaces: RE 18325-90/02.10. Description
RE 18325-90/12.10 1/10 Replaces: RE 18325-90/02.10 Coils Connectors Summary Description Page Description Page Coils Coil S8-356 - CLASS H - 20 W 2-3 Coil S8-356 - CLASS H - 17 W 4 Coil S5 - CLASS H 5 Coil
UM/22000 5/2 & 5/3 valves, solenoid and pilot actuated ISO 5599-1, ISO size 1, 2, 3 & 4 Sub-base mounted
U/ / & / valves, solenoid and pilot actuated ISO 99-, ISO size,, & Sub-base mounted Steel reinforced main seals 6 bar and bar NOO solenoid pilots with locking or non-locking manual override Low power coils
Control block VOFA with safety function
Key features Innovative Versatile Reliable Easy to assemble Can be used for safe reversing of a hazardous movement (5/2-way solenoid valve) Can be used for safe venting (3/2-way solenoid valve function,
RY2 miniature industrial relays
6 RY2 Relays of general application For plug-in sockets, 35 mm rail mount acc. to PN-EN 60715 or on panel mounting Flat insert connectors - faston x 0,5 mm Recognitions, certifications, directives: RoHS,
Solenoid Valve Island Type 3965
Solenoid Valve Island Type 365 for the control of pneumatic actuators General The Type 365 Solenoid Valve Island is a compact solution for the centralized control of pneumatic actuators in chemical and
S GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR
MAIN FEATURES The pneumatic S GATE knife gate valve is intended for the automatic shut off of pipes of the heavy fluids like slurries and powders. The main fields of application are the water treatment,
Magnetic and Hydraulic-Magnetic Circuit Breaker 8340-G2...
Magnetic and Hydraulic-Magnetic Circuit Breaker 840-G2... Description Single, two and three pole magnetic circuit breakers with trip-free mechanism and push/pull on/off manual actuation. A choice of fast
How To Use A Flowmeter
INLINE flowmeter for continuous flow measurement Economic integration in pipe systems without any additional piping 3-wire frequency pulse version to directly interface with PLC s (both PNP and NPN) Connection
Gold Eagle HV Gold Eagle HV Cable Kit (EtherCAT and CAN)
Gold Eagle HV Gold Eagle HV Cable Kit (EtherCAT and CAN) January 2014 (Ver. 1.000) Notice This guide is delivered subject to the following conditions and restrictions: This guide contains proprietary information
DMP 331. Industrial Pressure Transmitter for Low Pressure. Stainless Steel Sensor
DMP Industrial Pressure Transmitter for Low Pressure Stainless Steel Sensor accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 / 0. % FSO from 0... 00 mbar up to 0... 40 bar Output signals
DATA SHEET SERVO LK SMS FX8PLUS SIGNAL
Application LAPP servo cables according to Siemens * (see footnote) Standard FX8008 PLUS SIGNAL are a new generation of very highly flexible screened signal (encoder and resolver)- cables (P/Ns 00277101
Electro-Pneumatic Bus Door Control Mechanism
Electro-Pneumatic Bus Door Control Mechanism Application and Feature 1. Pneumatic Door Mechanism actuates the open/close movements of bus door through two double acting cylinders and two linkages with
Electro-hydraulic pressure switches type DG
Electro-hydraulic pressure switches type DG Pressure p max = 700 bar See also: For electronic pressure switches type DG 5 E see D 5440 E Analogous pressure transducer type DT 1 see D 5440 T Analogous pressure
Filter Fan Unit SILENT. Type SILENT AC Type SILENT EC
Technical Concept Filter Fan Unit SILENT Type SILENT AC Type SILENT EC Filter Fan Unit SILENT Technical Concept Product Description Filter Fan Units (FFUs) from M+W Products are designed to provide clean
Electric Rotary Actuator - On/Off or programmable control actuator
Electric Rotary Actuator - On/Off or programmable control actuator Direct mounting on quarter-turn valves Manual override standard Corrosion resistant Adjustable limit switches Multi-voltage version Type
Pressure and flow control system
Pressure and flow control system RE 30030/04.09 1/32 Replaces: RE 30024/11.03 RE 30027/06.04 RE 30030/01.04 Type SYDFE1, SYDFEE, SYDFEC, SYDFEn Size 18 to 140 Component series 2X Maximum operating pressure
Series 6000 Torque measured metal bellow coupling
Properties Free of float metal bellow coupling with integrated torque measurement Non-contact measurement system, high robustness High torsional stiffness Limited torque of inertia Performance Measurement
Water Separator. Main Line Filter. Mist Separator. Micro Mist Separator 150C 250C 350C 450C AMG 550C 2C 4C 8C 11C AFF 22C 37B 75B 150C 250C 350C 450C
Water droplet removal Water Separator Water droplet separation rate: % Model Flow capacity l/min (ANR) Max. flow capacity at 0.7 MPa inlet pressure 300 750 1,500 AMG 2,0 AMG to AMG/ Large dust particle
Mureva Assembly surface mounted wiring devices
1.0 Waterproof Assembly surface Switches P124543 P124547 External dimensions : 72 x 72 x 47 mm.. Assembly surface rockers become illuminated using bulbs and indicators in option. They can carry a label