Single sub-base valve

Transcription

1 solenoid valves Mini-valves 10 mm Electrical connection... Mounting... Port sizes... Rated temperature... Fluid... Working pressure... Nominal flow... Pneumatic connections Voltage... Power... NC poppet mini solenoid valves, 10 mm width, with manual override Telephone type (included) Single or manifold sub-base Single sub-base includes M3x0,5 connections for tube int. Ø 2,7. Manifold subbase is M5x0,8 (not included) C ( F) Filtered compressed air ( psi) 19 l/min (diameter Ø 0,8 mm) M3 x 0,5 (with single sub-base) M5 x 0,8 (with manifold sub-base) 24 V DC 1,2 watt Single sub-base valve NC mini-solenoid /-- - valve 10 mm width Manifold sub-base valve Valves qty

2 solenoid valves Mini-valves 15 mm Electrical connection... Mounting... Rated temperature... Fluid... Working pressure... Nominal flow... Port size... Voltage... Power... LED indicator... NC poppet mini solenoid valves, 15 mm width, with manual override DIN C socket plug (included) Single or manifold sub-base C ( F) Filtered compressed air ( psi) 16 l/min (diameter Ø 0,8 mm) M5 x 0,8 24 V DC (consult for other voltages) 1 watt Option 2 Single sub-base valve NC mini-solenoid /-- - valve 15 mm width LED indicator Manifold sub-base valve Valves qty

3 solenoid valves 203 series - M5 Mounting... Rated temperature... Medium temperature... Fluid... Working pressure... Nominal flow... Frequency... Materials... NC poppet solenoid valves, 22 mm width, with manual override Single or manifold assembly C ( F) C ( F) Filtered compressed air - Inert gases ( psi) 40 l/min (0,04 Cv) max. 24 Hz (at 6 ) Zinc alloy housing, epoxi resin encapsulated solenoid coil, stainless steel and brass armature tube Valves are provided with a M5x0,8 plug. If intended to be used in manifold, remove this plug. If intended to be used for single application, place an appropriate thread seal. normally /-- - closed solenoid valve Additional code Manifold kit Voltage V 50Hz - 240V 60Hz V 50Hz - 120V 60Hz V 50Hz - 48V 60Hz V 50Hz - 24V 60Hz V 50Hz - 12V 60Hz V 60Hz V 60Hz V DC V DC V DC V DC V DC To specify solenoid voltage, dashes must be replaced by values in the table. i.e.: a valve / with voltage 220V 50Hz, should be ordered as / 101 Valves qty When ordering a manifold, ask also the necessary quantity of valves

4 2/2 and solenoid valves 213 series - 1/8" Mounting... Electrical connection... Rated temperature... Medium temperature... Fluid... Working pressure... Nominal flow... Frequency... Materials... Special version... 2/2 and poppet solenoid valves, 32 mm width, with manual override Single mounting with side or bottom connections; manifold mounting DIN A socket plug (included) C ( ºF) ºC ( ºF) Filtered compressed air - Inert gases 0...2, ( psi) ( psi) ( psi) 78 l/min(*) 115 l/min 40 l/min (0,08 Cv) (0,12 Cv) (0,04 Cv) 23 Hz (1,5 ) 17 Hz (6 ) 13 Hz (10 ) Zinc alloy housing, epoxi resin encapsulated solenoid coil, stainless steel and brass armature tube Hydraulic or pneumatic use up to 30 (435 psi). 2 (*) With p=2,5, p=0,5 Desciption Ports position 0...2, Side /2 normally Bottom /--- closed solenoid valve Manifold Side /2 normally Bottom open solenoid valve Side normally Bottom closed solenoid valve Manifold Side normally Bottom open solenoid valve Hydraulic use solenoid valves Connectio n HD type HP type 2/2 normally Side closed solenoid valve Bottom hydraulic use Manifold Special version for hydraulic oil at pressure Nominal Ø1mm. Nominal flow 2,8 l/min. HP type is supplied from port 2 and exhausted by port 1. HD type is supplied from port 1 and exhausted by port 2. Additional code Voltage V 50Hz - 240V 60Hz V 50Hz - 120V 60Hz V 50Hz - 48V 60Hz V 50Hz V 50Hz V 60Hz V 60Hz V 60Hz V 60Hz V DC V DC V DC V DC V DC To specify solenoid voltage, dashes must be replaced by values in the table. i.e.: a valve / with voltage 220V 50Hz, should be ordered as /

5 2/2 and solenoid valves 213 series - 1/8" NC solenoid valve side connection NC solenoid valve bottom connection NO solenoid valve side connection NO solenoid valve bottom connection Manifold mounting solenoid valve Manifold kit Valves qty. Manifold kit bottom connection Manifold kit side connection Manifold mounting with bottom connection for air supply When ordering a manifold, ask also the necessary quantity of valves. Manifolds are only possible with NC valves. Manifold mounting with side connection for air supply Accessories Pressure separator Separating seal Manual override Upper threaded connection

6 and directional control valves SB 0 series - 1/8" Mounting... Port sizes... Rated temperature... Medium temperature... Fluid... Working pressure... Nominal flow... Frequency... Materials... and spool valves, or operated, with manual override Single mounting; manifold or manifold plate mounting Working: G 1/8 - Pilot: M5x0, C ( ºF) ºC ( ºF) Filtered compressed air (lubrication recommended) - Inert gases See table for each model 420 l/min (0,42 Cv) 24 Hz (with at 6 ) Zinc alloy housing, stainless steel spool, NBR seals 2 Working pressure Spare kit 1, , 2, , 0, , , , , , , , , , To specify solenoid voltage, dashes must be replaced by values in the table. i.e.: a valve / with voltage 220V 50Hz, should be ordered as / 101 Additional code / Ñ- Voltage V 50Hz - 240V 60Hz V 50Hz - 120V 60Hz V 50Hz - 48V 60Hz V 50Hz - 24V 60Hz V 50Hz - 12V 60Hz V 60Hz V 60Hz V DC V DC V DC V DC V DC

7 and directional control valves SB 0 series - 1/8" Pneumatic actuated valve Single solenoid actuated valve Double solenoid actuated valve Manifold options When ordering a manifold, ask also the necessary quantity of valves. Valves qty. Manifold Valves qty. Manifold plate

8 and directional control valves SB 0 series, surface mounting - 1/8" Mounting... Port sizes... Rated temperature... Medium temperature... Fluid... Working pressure... Nominal flow... Frequency... Materials... and spool valves, or operated, with manual override Surface mounted directly or by means an appropiate adaptor plate. Mounting seals and screws are included Working: G 1/8 - Pilot: M5x0, C ( ºF) ºC ( ºF) Filtered compressed air (lubrication recommended) - Inert gases See table for each model 420 l/min (0,42 Cv) 24 Hz (with at 6 ) Zinc alloy housing, stainless steel spool, NBR seals 2 Working pressure Spare kit 1, , 2, , 0, , , , , , , , , , To specify solenoid voltage, dashes must be replaced by values in the table. i.e.: a valve / with voltage 220V 50Hz, should be ordered as / 101 Additional code Voltage V 50Hz - 240V 60Hz V 50Hz - 120V 60Hz V 50Hz - 48V 60Hz V 50Hz - 24V 60Hz V 50Hz - 12V 60Hz V 60Hz V 60Hz V DC V DC V DC V DC V DC

9 and directional control valves SB 0 series, surface mounting - 1/8" Pneumatic actuated valve Single solenoid actuated valve Double solenoid actuated valve

10 , and 2x directional control valves VM15 series - 1/8 Ways / Positions... Mounting... Port sizes... Rated temperature... Medium temperature... Fluid... Working pressure... Nominal flow... Frequency... Materials... Spool valves, or operated, with manual override - - 2x valves in the same housing Inline Working: G 1/8 - Pilot: M3x0,5 - Pilot air exhaust: M3x0, C ( F) C ( F) Filtered compressed air (lubrication recommended) - Inert gases See table for each model 850 l/min (0,85 Cv) ( and version) 24 Hz (with at 6 ) Aluminum housing, stainless steel spool, NBR seals 2 Working pressure Spare kit To obtain the maximum flow available in these valves, it is recommended to use G1/8 push-in fittings with enlarged nominal diameter (see page ). 2, , , , , , , , , , To specify solenoid voltage, dashes must be replaced by values in the table. i.e.: a valve / with voltage 220V 50Hz, should be ordered as / 901 Additional code Voltage /230V - 50/60Hz V - 50/60Hz V - 50/60Hz V - 50/60Hz V DC V DC

11 , and 2x directional control valves VM15 series - 1/8 2 x Valves Working pressure Spare kit 2 x NC s 2, x NO 2, s 2 x NO + NC 2, s 2 x NC 2, s 2 x NO 2, s 2 x NO + NC 2, s Pneumatic actuated valve Single solenoid actuated valve Double solenoid actuated valve Pneumatic connection Any connector from chapter 7 can be used. Although, to obtain the maximum flow available in VM15 valves, it is recommended to use G1/8 push-in fittings with enlarged nominal diameter shown below. Type Threa d Tube outer diameter Recto M3x0, Codo M3x0, R ecto G 1/8"

12 , and 2x directional control valves VM15-B series - 1/8 Ways / Positions... Mounting... Port sizes... Rated temperature... Medium temperature... Fluid... Working pressure... Nominal flow... Frequency... Materials... Spool valves, or operated, with manual override - - 2x valves in the same housing Manifold mounting: plate mounting, multi-pin station or field bus station Working: G 1/8 - Pilot: M3x0,5 - Pilot air exhaust: M3x0, C ( F) C ( F) Filtered compressed air (lubrication recommended) - Inert gases See table for each model 850 l/min (0,85 Cv) ( and version) 24 Hz (with at 6 ) Aluminum housing, stainless steel spool, NBR seals 2 Working pressure Spare kit To obtain the maximum flow available in these valves, it is recommended to use G1/8 push-in fittings with enlarged nominal diameter (see page ). 2, , , , , , , , , , To specify solenoid voltage, dashes must be replaced by values in the table. i.e.: a valve / with voltage 220V 50Hz, should be ordered as / 901 Additional code Voltage /230V - 50/60Hz V - 50/60Hz V - 50/60Hz V - 50/60Hz V DC V DC

13 , and 2x directional control valves VM15-B series - 1/8 Valves Working pressure Spare kit 2 x NC s 2, x NO 2, s 2 x NO + NC 2, s 2 x NC 2, s 2 x NO 2, s 2 x NO + NC 2, s Manifold plate mounting When ordering a manifold, ask also the necessary quantity of valves. Valves qty. Manifold plate Accessories Blanking plate Pressure separator Plane mounting bracket (A) DIN Rail mounting

14 , and 2x directional control valves VM15-B series - 1/8 multi-pin station Electrical connection... Voltage... Indicators... Degree of protection... Port sizes... Available valves... Ambient temperature... Multi-pin solenoid valve station SUB-D 25 connector plug for Ø10mm multiwire cable, 0,20 mm 2 section 24 V DC LED and protection circuit for each solenoid IP65 acc. IEC 529 (with the socket adjusted) Supply: G 3/8 - Working: G 1/8 - Pilot: M3x0,5 - Pilot air exhaust: M3x0,5 (includes 2xG3/8 exhaust silencers and 3xG3/8 plugs) Any valve shown in page and C ( F) 2 Note: the multi-pin stations are delivered totally mounted, connected and tested. Ask for assistance from a MICRO consultant or ask for the coding software aid. Multi-pin station base 4 positions 6 positions 8 positions 10 positions 12 positions Simgle solenoid valve Double solenoid valve Connector wiring A: Plane mounting bracket B: Manual override Accesories Blanking plate (valve) Pressure separator Blanking plate (electrical) SUB-D 25 terminal Terminal with 5 m cable Terminal with 10 m cable Plane mounting bracket (A) DIN Rail mounting Pin C able colour P os. Solen. unctio n 1 Red 14 V1 2 Orang e 12 3 Light green 14 V2 4 Yellow 12 5 Violet 14 V3 6 Light pink 12 7 Light broun 14 V4 8 White 12 9 Grey 14 V5 10 Dark blue Dark broun Vcc V6 12 Dark green Skay-blue 14 V7 14 Dark + Yellow Dark broun + Yellow 14 V8 16 Green Yellowish Light green + Yellow 14 V9 18 Black Dark pink 14 V10 20 Light broun + Yellow Grey + Black V Light blue - - ree 23 Grey + Yellow V Vcc 24 Blue + Yellow V 25 White Yellowish V

15 , and 2x directional control valves VM15-B series - 1/8 AS-i field bus station Electrical connection... Electrical supply... Quiescent current... Switching threshold of inputs... Indicators... Degree of protection... Port sizes... Available valves... Ambient temperature... Pneumatic valve station with AS-i protocol interface AS-i yellow flat cable (option AS-i black cable for external power supply) Inputs: M8 connector AS-i power supply via yellow flat cable 20 ma (with input=0, output=0) 1,5 ma (low level) - 5 ma (high level) LED and protection circuit for each solenoid IP65 acc. IEC 529 Supply: G 3/8 - Working: G 1/8 - Pilot: M3x0,5 - Pilot air exhaust: M3x0,5 (includes 2xG3/8 exhaust silencers and 3xG3/8 plugs) Any valve shown in page and C ( F) AS-I station bases Inputs and Outputs Without external power supply With external power supply Single solenoid Double solenoid (*) Single solenoid Single solenoid Double solenoid Single solenoid 4I / 4O I / 4O I / 4O I / 8O I / 8O I / 8O (*) Only 2 valves are mounted, 2 blanking plates included. Single solenoid valves 4I / 4O Double solenoid valves 4I / 4O A: Plane Mounting bracket B: Manual override

16 , and 2x directional control valves VM15-B series - 1/8 AS-i field bus station Single solenoid valves 8I / 4O 2 Single solenoid valves 8I / 8O A: Plane Mounting bracket B: Manual override

17 , and 2x directional control valves VM15-B series - 1/8 AS-i field bus station Double solenoid valves 8I / 8O Single solenoid valves 16I / 8O A: Plane Mounting bracket B: Manual override Accesories Blanking plate Pressure separator Plane mounting bracket (A) DIN Rail mounting Note: the field-bus stations are delivered totally mounted, connected and tested. Ask for assistance from a MICRO consultant for coding

18 and directional control valves SB 1 series - 1/4 Mounting... Port sizes... Rated temperature... Medium temperature... Fluid... Working pressure... Nominal flow... Frequency (at 6 )... Materials... and spool valves, or operated, with manual override Single mounting; manifold or manifold plate mounting Working: G 1/4 - Pilot: M5x0, C ( F) C ( F) Filtered compressed air (lubrication recommended) - Inert gases See table for each model 1000 l/min (1,016 Cv) 18 Hz () 16 Hz () Zinc alloy housing, aluminum spool, NBR seals 2 Working pressure Spare kit 1, , , , , , , , , , , , To specify solenoid voltage, dashes must be replaced by values in the table. i.e.: a valve / with voltage 220V 50Hz, should be ordered as / 101 Additional code Voltage V 50Hz - 240V 60Hz V 50Hz - 120V 60Hz V 50Hz - 48V 60Hz V 50Hz - 24V 60Hz V 50Hz - 12V 60Hz V 60Hz V 60Hz V DC V DC V DC V DC V DC

19 and directional control valves SB 1 series - 1/4 Pneumatic actuated valve Single solenoid actuated valve Double solenoid actuated valve Manifold Valves qty When ordering a manifold, ask also the necessary quantity of valves. Manifold plate Valves qty When ordering a manifold, ask also the necessary quantity of valves

20 , and directional control valves SB 1 series - 1/4 NAMUR mounting Mounting... Port sizes... Rated temperature... Medium temperature... Fluid... Working pressure... Nominal flow... Frequency (at 6 )... Materials..., and spool valves, or operated, with manual override NAMUR pattern surface mounting Working: G 1/4 - Pilot: M5x0, C ( F) C ( F) Filtered compressed air (lubrication recommended) - Inert gases See table for each model 1000 l/min (1,016 Cv) 18 Hz () 16 Hz () Zinc alloy housing, aluminum spool, NBR seals 2 Two M5x35 fixing screws, one M5x10 positioning screw and two O rings are included. Version includes an adapter plate. Working pressure Spare kit 1, , , , , , , , , , , , To specify solenoid voltage, dashes must be replaced by values in the table. i.e.: a valve / with voltage 220V 50Hz, should be ordered as / 101 For explosion-proof solenoids, see chapter 5. Additional code Voltage V 50Hz - 240V 60Hz V 50Hz - 120V 60Hz V 50Hz - 48V 60Hz V 50Hz - 24V 60Hz V 50Hz - 12V 60Hz V 60Hz V 60Hz V DC V DC V DC V DC V DC

21 , and directional control valves SB 1 series - 1/4 NAMUR mounting valves Working pressure Spare kit 1, , 2, , 0, , , , Pneumatic actuated valve ( and ) Single solenoid actuated valve ( and ) Double solenoid actuated valve ( and )

22 and directional control valves CH1 NG series - 1/4 Port sizes... Electric operator... Rated temperature... Medium temperature... Fluid... Working pressure... Nominal flow ()... Nominal flow ()... Materials... and spool valves, or operated Working: G 1/4 - Pilot: M5x0,8 Electric operator with manual override (option CNOMO standard) C ( F) C ( F) Filtered compressed air (lubrication recommended) - Inert gases See table for each model 1650 l/min (1,6 Cv) 1000 l/min (1,0 Cv) Zinc alloy housing, hard anodized aluminum spool, NBR seals 2 Working pressure Operators spare kits Pneumati c ( 1) "NG" versions (1) Electrical (1) To specify solenoid voltage, dashes must be replaced by values in the table. i.e.: a valve / with voltage 220V 50Hz, should be ordered as / 101 Additional code Voltage V 50Hz - 240V 60Hz V 50Hz - 120V 60Hz V 50Hz - 48V 60Hz V 50Hz - 24V 60Hz V 50Hz - 12V 60Hz V 60Hz V 60Hz V DC V DC V DC V DC V DC

23 and directional control valves CH1 NG series - 1/4 Pneumatic actuated valve Single solenoid actuated valve Double solenoid actuated valve

24 and directional control valves CH1 NG series - 1/4 Manifold Valves qty Blanking plate When ordering a manifold, ask also the necessary quantity of valves. Blanking plate is used for spare valve positions. Manifold plate Valves qty Blanking plate When ordering a manifold, ask also the necessary quantity of valves. Blanking plate is used for spare valve positions

25 , and directional control valves CH1 NG series - 1/4 NAMUR mounting Mounting... Port sizes... Electric operator... Rated temperature... Medium temperature... Fluid... Working pressure... Nominal flow ()... Nominal flow ()... Materials..., and spool valves, or operated NAMUR pattern surface mounting Working: G 1/4 - Pilot: M5x0,8 Electric operator with manual override (option CNOMO standard) C ( F) C ( F) Filtered compressed air (lubrication recommended) - Inert gases See table for each model 1650 l/min (1,6 Cv) 1000 l/min (1,0 Cv) Zinc alloy housing, hard anodized aluminum spool, NBR seals Two M5x35 fixing screws, one M5x10 positioning screw and two O rings are included. Version includes an adapter plate. Working pressure Operators spare kits Pneumati c ( 1) "NG" versions (1) Electrical (1) To specify solenoid voltage, dashes must be replaced by values in the table. i.e.: a valve / with voltage 220V 50Hz, should be ordered as / 101 For explosion-proof or low consumption solenoids, see chapter 5. Additional code Voltage V 50Hz - 240V 60Hz V 50Hz - 120V 60Hz V 50Hz - 48V 60Hz V 50Hz - 24V 60Hz V 50Hz - 12V 60Hz V 60Hz V 60Hz V DC V DC V DC V DC V DC

26 , and directional control valves CH1 NG series - 1/4 NAMUR mounting valves Working pressure Spare kit 1, , 2, , 0, , , , Pneumatic actuated valve ( and ) Single solenoid actuated valve ( and ) Double solenoid actuated valve ( and )

27 directional control valves CH1 NG series - 1/4 Port sizes... Rated temperature... Medium temperature... Fluid... Working pressure... Nominal flow... Materials... spool valves, or operated Working: G 1/4 - Pilot: M5x0, C ( F) C ( F) Filtered compressed air (lubrication recommended) - Inert gases See table for each model 1650 l/min (1,6 Cv) Zinc alloy housing, hard anodized aluminum spool, NBR seals Working pressure , , Spare kits for Pneumati c Electro-pneumatic To specify solenoid voltage, dashes must be replaced by values in the table. i.e.: a valve / with voltage 220V 50Hz, should be ordered as / 101 For explosion-proof or low consumption solenoids, see chapter 5. Additional code Voltage V 50Hz - 240V 60Hz V 50Hz - 120V 60Hz V 50Hz - 48V 60Hz V 50Hz - 24V 60Hz V 50Hz - 12V 60Hz V 60Hz V 60Hz V DC V DC V DC V DC V DC

28 directional control valves CH1 NG series - 1/4 Pneumatic actuated valve 2 Single solenoid actuated valve Double solenoid actuated valve

29 and directional control valves CH 3 series - 1/2 Port sizes... Electric operator... Rated temperature... Medium temperature... Fluid... Working pressure... Nominal flow ()... Nominal flow ()... Materials... and spool valves, or operated Working: G1/2 - Pilot: G1/8 CNOMO standard electric operator with manual override C ( F) C ( F) Filtered compressed air (lubrication recommended) - Inert gases See table for each model 4200 l/min (4,2 Cv) 4000 l/min (4,0 Cv) Zinc alloy housing, hard anodized aluminum spool, NBR seals Working pressure Spare kit Operators spare kits Pneumati c Electrical To specify solenoid voltage, dashes must be replaced by values in the table. i.e.: a valve / with voltage 220V 50Hz, should be ordered as / 101 Additional code Voltage V 50Hz - 240V 60Hz V 50Hz - 120V 60Hz V 50Hz - 48V 60Hz V 50Hz - 24V 60Hz V 50Hz - 12V 60Hz V 60Hz V 60Hz V DC V DC V DC V DC V DC

30 and directional control valves CH 3 series - 1/2 Single solenoid actuated valve Double solenoid actuated valve 2 Pneumatic actuated valve Manifold Valves qty Blanking plate When ordering a manifold, ask also the necessary quantity of valves. Blanking plate is used for spare valve positions