3/2, 5/2, 5/3 Way 3/2 Way, Mini, KCV Series 3 3/2 Way, Mini, Gang Mount Components, KCV Series 5 3/2 Way, Solenoid Spring, CKV200 Series 7 3/2 Way, Solenoid Solenoid, CKV300 Series 9 5/2 & 5/3 Way, Solenoid Spring, DKV200 Series 11 5/2 & 5/3 Way, Solenoid Solenoid, DKV300 Series 13 5/2 & 5/3 Way, Solenoid Spring Solenoid, DKV0 Series 15 5/2 Way, Namur Solenoid Spring, DKM Series 17 5/2 Way, Namur Solenoid Solenoid, DKM Series 17 Solenoid Coils 19 Solenoid Valve Manifolds 21 General Purpose Solenoid Valves Pilot Operated 23 Valve Timer 25 Direct Acting 27 ISO K Sub-based Valves Solenoid 29 Installation & Application Data Before installing, be sure the valve hasn t been damaged in transit. Use clean lubricated air filtered to µm. Be aware of the flow direction and port size. Please note whether the installation conditions meet the technical requirements (such as voltage, actuation frequency, working pressure and temperature) before installing the valve. Notice the flow direction of air during installation; P is the air input, A (B) is the outlet port, and R (S) is the exhaust port. Avoid freezing temperature and vibration. Before use ensure fittings and tubes are clean. Use PTFE tape correctly when connecting fittings. To stop the ingress of dust use silencers in the exhaust ports. After installation use the manual override to test the valve first. 1
2
3/2 Way, Mini, KCV Series Specification Model KCV1-M5 KCV1-06 Fluid Air (to be filtered by µm filter element) Acting Direct Port M5 1/8 Orifice Ø 1.2mm Valve Type 3/2 Operating Pressure 0-0.8MPa (0-114psi) Proof Pressure 1.5MPa (215psi) Temperature -20 to +70ºC Material of Body Aluminium Alloy Lubrication Not Required Coil Specification Item Specification Standard voltage 24V DC 110V 50/60Hz 220V 50/60Hz Scope of voltage AC : ± 15% DC : ± 10% Power consumption AC : 3.5VA DC : 3.0W Protection IP65 (DIN050) Temperature classification B Class Electriacal entry Terminal Activating time 0.05 sec Symbol Ordering Code K C V 1 0 6 A Model Port Size Voltage KCV1 : Solenoid Valve 3/2 Way M5 : M5 B : 24V DC 06 : 1/8 C : 110V 50/60Hz A : 220V 50/60Hz Flow Chart Product Features 1 Direct acting. 2 Sub-based mounted. 3 Manual override. 4 Several standard voltages are available. 5 Several valves can be gang mounted together with the use of coupling screws and O-rings, saving space on installations. 6 Can be used as a stand alone valve. 7 Comes complete with Solenoid Coil & DIN Connector. Operating Pressure MPa Inlet pressure P1 Flow : L/min 3
3/2 Way, Mini, KCV Series Dimensions 76 2xø3.3( Thru. hole) 2xø5. 3( Counter sink) 63. 4 8 M5 3xM5 0. 8 06 3x1/ 8 A 62 13 23 15 2xM4 0. 7 dp: 6 25 18 P 3. 5 16 5. 5 30 06 10. 5 M5 12.5 Inner Structure No. Item 1 Connector 2 Gasket 3 Coil Nut 4 Coil Nut 5 Armature 6 O-ring 7 Return Spring 8 Body 4
3/2 Way, Mini, Gang Mount Components, KCV Series Ordering Code KCV1-P31 KCV1-P30 KCV1-P32 Long Coupling Screws & O-ring Short Coupling Screws & Fixing Nuts Base Plate & Fixing Screws Series Connection Dimensions 3 Gang Mounted Valves Base Plate 76 23 69=( 3 2 3) 8 1. 5 23 6 x M4x0.7dp6 15 15 15 25 30 7 8 Base Plate 2 xø4.5 25 34. 5 43 How to Connect KCV1-P31 KCV1-P31 5 KCV1-P30 KCV1-P32 KCV1-P32
6
3/2 Way, CKV200 Series Specification Model CKV210-06 CKV220-06 CKV210-08 CKV220-08 Fluid Air(to be filtered by µm filter element) Acting Internal Piloted Port 1/8" 1/4" Orifice 14.0mm 2 (Cv=0.78) 16.0mm 2 (Cv=0.89) Valve Type 3/2 Lubrication Not required Operating Pressure 0.15 0.8MPa(21 114psi) Proof Pressure 1.5MPa(215psi) Temperature -20 to +70 C Material of Body Aluminum Alloy G threads as standard. PT & NPT threads are available on request. If using lubricants the practice must remain constant for the life of the valve. Lubricants like ISO VG32 or the equivalent are recommended Symbol Normally Open Normally Closed Ordering Code CKV 2 10 08 NO Model CKV2 : 200 Series Solenoid Valve (3/2 way) Port size 06 : 1/8" 08 : 1/4" Valve type 10 : Single solenoid 20 : Double solenoid Acting type NC : Normally closed NO : Normally opened Thread type P : PT T : NPT BLANK : BSPP 1 Remark: 2 position double control solenoid valves have no differences between normally opened & normally closed, thus this code is blank. Product Features 1 Pilot-oriented mode is internally piloted. 2 Sliding spool has tight tolerances. 3 Double control solenoid valves have memory function. 4 Internal orifice adopts special processing technology giving low friction and long service life. 5 Lubrication is not necessary but once oil is introduced to the valve it must be continued. 6 Valves have manual override. 7 Several standard voltages are available. Flow Chart Model CKV210-08-NO Operating Pressure (M Pa) Flow L/min 7
3/2 Way, CKV200 Series Dimensions CKV210 Item CKV210-06 CKV210-08 A 27.7 28.7 B 0 1.5 C 22 22.5 D 16.7 16.45 CKV220 Item CK V220-06 CKV220-08 A 81.4 82.4 B 0 1.5 C 22 22.5 D 70.4 70.15 A B 22 17 12.7 30 2-ø3.2 Manual override 15.2 25 66.7 3 2xø4.2 8.2 35 Inner structure 109 D C C D A B 2-ø3.2 66.4 30 2xø4.2 Manual override 66.7 3 8.2 25 162.8 69 CKV210-06 : 3 x 1/8" CKV210-08 : 3 x 1/4" CKV220-06 : 3 x 1/8" CKV220-08 : 3 x 1/4" Inner Structure 17 22 35 8 No. Item No. Item No. Item 1 Fixed Plate 8 O-ring 15 Piston 2 Manual Override 9 Body 16 Pilot Screw 3 Override Spring 10 Spool Spring 17 O-ring 4 Piston O-ring 11 End Cover Gasket 18 Armature 5 Pilot Body 12 End Cover 19 Coil 6 Spool Packing 13 Screw 20 Coil Nut 7 Spool 14 Wearing Ring 21 Connector
3/2 Way, CKV300 Series Specification Model CKV310-10 CKV320-10 Fluid Acting Air (to be filtered by µm filter element) Internal Piloted Port 3/8" Orifice 30.0mm 2 (Cv=1.67) Valve Type 3/2 Symbol Normally Open Normally Closed Lubrication Operating Pressure Proof Pressure Temperature Material of Body Not required 0.15 0.8MPa(21 114psi) 1.5MPa(215psi) -20 to +70 C Aluminum Alloy G threads as standard. PT & NPT threads are available on request. If using lubricants the practice must remain constant for the life of the valve. Lubricants like ISO VG32 or the equivalent are recommended. Ordering Code CKV3 10 10 NO Model CKV : Solenoid Valve (3/2 way) 300 Series Port size 10 : 3/8" Valve type 10 : Single solenoid 20 : Double solenoid Acting type NC : Normally closed NO : Normally opened Thread type P : PT T : NPT BLANK : BSPP Product Features 1. Pilot-oriented mode is internally piloted. 2. Sliding spool has tight tolerances. 3. Double control solenoid valves have memory function. 4. Internal orifice adopts special processing technology giving low friction and long service life. 5. Lubrication is not necessary but once oil is introduced to the valve it must be continued. 6. Valves have manual override. 7. Several standard voltages are available. 1 Remark: 2 position double control solenoid valves have no differences between normally opened and normally closed state, thus this code is blank. Flow Chart Operating Pressure (MPa) Model CKV310-10-NO Flow L/min 9
3/2 Way, CKV300 Series Dimensions CKV310 32.5 08:0 10:2 20 27 15 35 2x ø4.3 Manual override 2x ø4.3 17.5 30 69.2 2.4 10.5 120 20.5 24 CKV310-08 3 x 1/4" CKV310-10 3 x 3/8" 2x ø4.3 2.4 69.2 CKV320-08 3 x 1/4" CKV320-10 3 x 3/8" CKV320 87.4 70 35 2x ø4.3 10.5 Manual override 72.4 30 174.8 24 75.4 08:0 10:2 20 27 Inner Structure 10 No. Item No. Item No. Item 1 Fixed Plate 8 O-ring 15 Piston 2 Manual Override 9 Body 16 Pilot Screw 3 Ov erride Spring 10 Spool Spring 17 O-ring 4 Piston O-ring 11 End Cover Gasket 18 Armature 5 Pilot Body 12 End Cover 19 Coil 6 Spool Packing 13 Screw 20 Coil Nut 7 Spool 14 Wearing Ri ng 21 Connector
5/2 & 5/3 Way, DKV200 Series Specification Model DKV210-06 DKV220-06 DKV230C-06 DKV230E-06 DKV230P-06 DKV210-08 DKV220-08 DKV230C-08 DKV230E-08 DKV230P-08 Fluid Acting Air (to be filtered by µm filter element) Internal Piloted Port 1/8" Inlet & Outlet 1/4" Exhaust 1/8" Orifice 14.0mm 2 (Cv=0.78) 12.0mm 2 (Cv=0.67) 16.0mm 2 (Cv=0.89) 12.0mm 2 (Cv=0.67) Valve Type 5/2 5/3 5/2 5/3 Operating Pressure 0.15 0.8MPa(21 114p si) Proof Pressure Temperature Material of Body Lubrication 1.5MPa(215psi) -20 to +70 C Aluminum Alloy Not required Max. frequency 5 cycle/sec 3 cycle/sec 5 cycle/sec 3 cycle/sec Weight DKV210-06 220g DKV220-06 320g 360g DKV210-08 220g DKV220-08 320g 360g G threads as standard. PT & NPT threads are available on request. If using lubricants the practice must remain constant for the life of the valve. Lubricants like ISO VG32 or the equivalent are recommended. Ordering Code DKV 2 10 08 Symbol Solenoid Spring Solenoid Solenoid Model DKV : Solenoid valve (5/2 & 5/3 way) Code 2 : 200 Series Valve type Port size 06 : 1/8" 08 : 1/4" Thread type P : PT T : NPT BLANK : BSPP 10 : Solenoid Spring 5/2 way 20 : Solenoid Solenoid 5/2 way 30C : Solenoid Spring Solenoid 5/3 way Fully Sealed 30E : Solenoid Spring Solenoid 5/3 way Supply Sealed 30P : Solenoid Spring Solenoid 5/3 way Centre Open Pressurised Supply Sealed Centre Open Pressurised Fully Sealed Please refer to Pages 21 & 22 for manifold specification and ordering information. Flow Charts Operating P ressure ( MPa ) Operating Pressure ( MPa ) Model : DKV210-06 Flow : L/min Model : DKV210-08 Flow : L /min Product Features 1 Pilot-oriented mode has optional internal or external pilots. 2 Sliding spool has tight tolerances. 3 Three position valves have three different central functions. 4 Double control solenoid valves have memory function. 5 Internal orifice adopts special processing technology giving low friction and long service life. 6 Lubrication is not necessary but once oil is introduced to the valve it must be continued. 7 Manifold bases are available for 5/2 valves to save installation space. 8 Valves have manual override for test purposes. 9 Several standard voltages are available. 11
5/2 & 5/3 Way, DKV200 Series Dimensions DKV210 66.7 Inner Structure 36 13.7 17 22 31.7 117 21.7 20 2x ø4.3 10.5 35 Model A B C D E DKV210-06 1/8" 1/8" 18 22.7 0 DKV210-08 1/8" 1/4" 21 21.2 3 36 67.4 x DKV220 x 85.4 2x ø4.3 171 75.4 20 3 Manual override 62.2 66.7 3 Manual override 61 3 x 12.7 38 x 66.4 38 E 2x ø3.2 D C 2x ø3.2 D C 10 17 22 10.5 35 E Model A B C D E DKV220-06 1/8" 1/8" 18 76.4 0 DKV220-08 1/8" 1/4" 21 74.9 3 DKV230 66.7 No. Item No. Item No. Item 1 Connector 9 Wearing Ring 17 Override Spring 2 Coil Nut 10 End Cover 18 Manual Override 3 Coil 11 Fixed Screw 19 Spring Holder 4 Armature 12 Spool Spring 20 Return Spring 5 Fixed Plate 13 End Cover Gasket 21 Side Cover 12 67.4 36 85.4 x 2x ø4.3 190 75.4 20 3 Manual override 80 3 x 66.4 38 D C 2x ø3.2 4V230(Grommet) 6 Piston 14 Spool O-ring 22 Spring Holder 7 Pilot Kit 15 Spool 8 Body 16 Piston O-ring 17 22 10.5 35 E Model A B C D E DKV230-06 1/8" 1/8" 18 76.4 0 DKV230-08 1/8" 1/4" 21 74.9 3
5/2 & 5/3 Way, DKV300 Series Specification Model Fluid Acting DKV310-10 DKV320-10 Air (to be filtered by µm filter element) Internal Piloted Port Inlet & Outlet 3/8" Ex haust 1/4" Orific e 30.0mm 2 (C v=1. 68) DKV330C-10 DKV 330E-10 DKV 330P-10 18.0mm 2 (Cv=1.00) Valve Type 5/2 5/3 Operating Pressure Proof Pressure 0.15 0.8MPa (21 114psi) 1.5MPa (215psi) Temperature -20 to +7 0 C Material of Body Lubrication Aluminum Alloy Not required Max. frequency 4 cycle/sec 3 cycle/sec Weight DKV310-10 DKV320-10 310g 0g 450g Ordering Code DKV 3 10 10 Symbol Solenoid Spring Solenoid Solenoid Model DKV : Solenoid Valve (5/2 & 5/3 way) Code 3 : 300 Series Valve type Port size 10 : 3/8" 10 : Solenoid Spring 5/2 way 20 : Solenoid Solenoid 5/2 way 30C : Solenoid Spring Solenoid 5/3 way Fully Sealed Thread type P : PT T : NPT BLANK : BSPP 30E : Solenoid Spring Solenoid 5/3 way Supply Sealed 30P : Solenoid Spring Solenoid 5/3 way Centre Open Pressurised Fully Sealed Centre Open Pressurised Supply Sealed Please refer to Pages 21 & 22 for manifold specification and ordering information. Flow Chart Operating Pressure ( MPa ) Operating Pressure ( MPa ) Model : DKV310-08 Flow L/min Model : DKV310-10 Flow L/min Product Features 1 Pilot-oriented mode has optional internal or external pilots. 2 Sliding spool has tight tolerances. 3 Three position valves have three different central functions. 4 Double control solenoid valves have memory function. 5 Internal orifice adopts special processing technology giving low friction and long service life. 6 Lubrication is not necessary but once oil is introduced to the valve it must be continued. 7 Manifold bases are available for 5/2 valves to save installation space. 8 Valves have manual override for test purposes. 9 Several standard voltages are available. 13
5/2 & 5/3 Way, DKV300 Series Dimensions DKV310 69.2 Inner Structure 17.5 45 20 27 2xA 2x ø4.3 28 24 13.5 2.4 Manual override 80 135 x 2x ø4.3 10 Model A B C D E DKV310-10 1/4" 3/8" 24 28 4 DKV320 69.2 72.4 45 2xA 94.9 2 x ø4.3 82.9 24 2.4 Manual override 80 190 x 2x ø4.3 20 27 13.5 Model A B C D E DKV320-10 1/4" 3/8" 24 82.9 4 No. Item No. Item No. Item 1 Connector 9 Wearing Ring 17 Override Spring DKV330 69.2 2 Coil Nut 10 End Cover 18 Manual Override 3 Coil 11 Fixed Screw 19 Spring Holder 4 Armature 12 Spool Spring 20 Return Spring 5 Fixed Plate 13 End Cover Gasket 21 Side Cover 6 Piston 14 Spool O-ring 22 Spring Holder 7 Pilot Kit 15 Spool 8 Body 16 Piston O-ring 14 72.4 45 94.9 2 x A 82.9 24 2x ø4.3 2.4 Manual override 99 x 209 69.9 50 2x ø4.3 D C 20 27 13.5 Model A B C D E DKV330-10 1/4" 3/8" 24 82.9 4
5/2 & 5/3 Way, DKV0 Series Specification Model DKV410-15 DKV420-15 DKV430C-15 DKV430E-15 DKV430P-15 Fluid Air (to be filtered by µm filter element) Acting Internal Piloted Port 1/2" Orifice 50.0mm 2 (Cv=2.79) 30.0mm 2 (Cv=1. 68) Valve Type 5/2 5/3 Operating Pressure 0.15 0.8MPa (21 114psi) Proof Pressure 1.5MPa (215psi) Temperature -20 to +7 0 C Material of Body Aluminum Alloy Lubrication Not required Max. frequency 3 cycle/sec Weight 590g 720g 770g Symbol Solenoid Spring Ordering Code DKV 4 10 15 Solenoid Solenoid Model 4V : Solenoid Valve (5/2 & 5/3 way) Code 4 : 0 Series Valve type Port size 15 : 1/2" 10 : Solenoid Spring 5/2 way Thread type P : PT T : NPT BLANK : BSPP 20 : Solenoid Solenoid 5/2 way 30C : Solenoid Spring Solenoid 5/3 way Fully Sealed 30E : Solenoid Spring Solenoid 5/3 way Supply Sealed 30P : Solenoid Spring Solenoid 5/3 way Centre Open Pressurised Fully Sealed Supply Sealed Please refer to Pages 21 & 22 for manifold specification and ordering information. Product Features 1 Pilot-oriented mode has optional internal or external pilots. 2 Sliding spool has tight tolerances. 3 Three position valves have three different central functions. 4 Double control solenoid valves have memory function. 5 Internal orifice adopts special processing technology giving low friction and long service life. 6 Lubrication is not necessary but once oil is introduced to the valve it must be continued. 7 Manifold bases are available for 5/2 valves to save installation space. 8 Valves have manual override for test purposes. 9 Several standard voltages are available. Flow Chart Operating Pressure ( MPa ) Centre Open Pressurised Model : DKV410-15 Model : DKV410-15 Flow L/min 15
5/2 & 5/3 Way, DKV0 Series Dimensions DKV410 74.2 Inner Structure 63 25.5 57 5x 1/2" 168.4 43 28 2 x ø5.5 2.8 Manual override 113.8 72 21 4 2 x ø4.3 39 36 10 27 34 17.5 50 DKV420 74.2 5x 1/2" 2 x ø5.5 2.8 2 x ø4.3 63 79.9 111.4 222.8 28 97.4 Manual override 113 72 75.4 4 93.4 36 27 34 DKV430 17.5 50 74.2 No. Item No. Item No. Item 1 Connector 9 Wearing Ring 17 Override Spring 2 Coil Nut 10 Bottom Cover 18 Manual Override 3 Coil 11 Fixed Screw 19 Spring Holder 4 Armature 12 Spool Spring 20 Return Spring 5 Fixed Plate 13 End Cover Gasket 21 Side Cover 6 Piston 14 Spool O-ring 22 Spring Holder 7 Pilot Kit 15 Spool 8 Body 16 Piston O-ring 5x 1/2" 2 x ø5.5 2.8 30(Ter 2 x ø4.3 16 63 79.9 mina 111.4 243.8 28 97.4 Manual override 134 72 75.4 4 93.4 36 27 34 17.5 50
5/2 Way, Namur, DKM Series Specification Model DKM310-08 DKM320-08 DKM310-10 DKM320-10 Fluid Ai r (to be filtered by µm filter element Acting Internal Piloted Port 1/4" Inlet 3/8" Exhaust 1/4" Orifice 25.0mm 2 (Cv=1.) 30.0mm 2 (Cv=1.68) Valve Type 5/2 Operating Pressure 0.15 0.8MPa (21 114psi) Proof Pressure 1.5MPa (215psi) Temperature -20 to +70 C Material of Body Aluminum Alloy Lubrication Not required Max. frequency 4 cycle / sec Weight DKM310 310g DKM320 0g Ordering Code DKM 3 10 10 Symbol Solenoid Spring Code 3 : 300 Series Model DKM : Solenoid Valve (5/2 way NAMUR type) Valve type Port size 08 : 1/4" 10 : 3/8" 10 : Solenoid Spring 5/2 way 20 : Solenoid Solenoid 5/2 way Thread type P : PT T : NPT BLANK : BSPP Solenoid/Solenoid Please refer to Pages 21 & 22 for manifold specification and ordering information. Flow Chart Operating Pressure ( MPa ) Operating Pressure ( MPa ) Model : DKM310-08 Flow L/min Model : DKM320-10 Flow L/min Product Features 1 Internal pilot. 2 Sliding spool has tight tolerances. 3 Double control solenoid valves have memory function. 4 Internal orifice adopts special processing technology giving low friction and long service life. 5 Lubrication is not necessary but once oil is introduced to the valve it must be continue. 6 Valves can be mounted directly onto Namur actuators. 7 Valves have manual override. 8 Several standard voltages are available. 17
5/2 Way, Namur, DKM Series Dimensions DKM310 Manualoverride 2 x ø5.2 69.2 2.4 135 4M31008 x 1/4" 4M31010 x 3/8" 1/4" Manualoverride 2 x ø5.2 DKM320 69.2 2.4 4M31008 x 1/4" 4M31010 x 3/8" 1/4" 29.3 21.5 2 x ø19.2 dp : 1.7 32 28 24 27 45 17.5 21.5 2 x ø19.2 dp : 1.7 24 190 83 95 45 72.4 32 Inner Structure 18 No. Item No. Item 1 Connector 10 End Cover 2 Coil Nut 11 Fixed Screw 3 Coil 12 Spool Spring 4 Armature 13 End Cover Gasket 5 Fixed Plate 14 Spool O-ring 6 Piston 15 Spool 7 Pilot Kit 16 Piston O-ring 8 Body 17 Override Spring 9 Wearing Ring 18 Manual Override
Solenoid Coils Specification Standard voltage AC220V AC110V AC24V DC24V DC12V Scope of voltage AC ±15% DC ±10% Power consumption AC 2. 5VA DC 2.5W AC 3.5VA DC 3.0W Protection IP65 DIN050 Temperature classification B Class Electrical entry Terminal Activating time 0.05 sec Ordering Code K-12DC 12V DC K24DC 24V DC K-24AC 24V 50/60Hz K-110AC K-220AC 110V 50/60Hz 220V 50/60Hz 1 to positive pole 2 to negative pole Coil terminal with DC specification has polar indicator lights, thus when wiring, please notice positive and negative poles, 1 shall be connected to positive pole, 2 to negative pole. If the poles are connected incorrectly, the indicator lights will not light up but the valve will still actuate. 19
20
Solenoid Valve Manifolds Specification Model A00KM B00KM C00KM D00KM Fluid Air (to be filtered by µm filter element) Temperature -20 to +70ºC To Suit 200 Series 200 Series 300 Series 0 Series Ordering Code For Manifold A 0 0 1 F Model A00M : 1/8 BSP B00KM : 1/4 BSP C00KM : 3/8 BSP D00KM : 1/2 BSP Number of Stations 1F : 1 2F : 2 16F : 16 A00M and B00KM series both have a maximum of 16 stations; C00KM series have a maximum of 12 stations; D00KM series have a maximum of 8 stations. Product Features 1 Use with direction 5/2 and 5/3 valves of the same series to save space and costs. 2 Easy fault finding with common air intake and exhaust unified wiring. 3 Flexible system can be expanded easily. Ordering Code For Blanking Plate A 0 0 K M B Model A00KM : A Series : 1/8 BSP B00KM : B Series : 1/4 BSP C00KM : C Series : 3/8 BSP D00KM : D Series : 1/2 BSP A00M series have a maximum of 16 stations; B00KM series have a maximum of 16 stations; C00KM series have a maximum of 12 stations; D00KM series have a maximum of 8 stations. 21
Solenoid Valve Manifolds Dimensions øe Blanking plate L Model A B C D E F G H I J 2F 3F 4F 5F 6F 7F 8F 9F 10F B00KM 61 50.7 21 4.5 22.4 23 6 12 31.7 46 69 92 115 138 161 184 207 230 253 C00KM 75 64.8 26 4.5 27.3 27 6 13.5 54 82 110 138 166 194 222 250 278 306 D00KM 104 94.5 32 5.5 34.3 31.5 7 14.5 57 63 98 133 168 203 238 273 308 - - Model L P 11F 12F 13F 14F 15F 16F 1F 2F 3F 4F 5F 6F 7F 8F 9F 10F 11F 12F 13F 14F 15F 16F B00KM 276 299 322 345 368 391 34 57 80 103 126 149 172 195 218 241 264 287 310 333 356 379 C00KM 334 362 - - - - 42 70 98 126 154 182 210 238 266 294 322 350 - - - - D00KM - - - - - - 49 84 119 154 189 224 259 294 - - - - - - - - øe Model K K 1 M1 M 1 Q R S T U V W X Y 5F 6F 7F 8F 9F 10F B00KM 170 92 189 111 1/4 43 32 30.5 14.5 9 93 26 35 138 161 184 207 230 253 C00KM 188.8 111 208 130 3/8 53 48 37.5 13.5 11 99.5 30 166 194 222 250 278 306 Blanking plate D00KM 221.8 142 243 163 1/2 68 67 52 18.5 18 112.5 38 50 203 238 273 308 - - L Model / Item A B C E F G H I J 1F 2F 3F 4F 5F 6F 7F 8F 9F 10F 11F 12F A00M 58 43.2 20 4.5 18.3 19 5 10 28.2 38 57 76 95 114 133 152 171 190 209 228 247 B00KM 61 50.7 21 4.5 22.4 23 6 12 31.7 46 69 92 115 138 161 184 207 230 253 276 299 C00KM 75 64.8 26 4.5 27.3 27 6 13.5 54 82 110 138 166 194 222 250 278 306 334 362 D00KM 104 94.5 32 5.5 34.3 31.5 7 14.5 57 63 98 133 168 203 238 273 308 22 Model / Item L 13F 14F 15F 16F 1F 2F 3F 4F 5F 6F 7F 8F 9F 10F 11F 12F 13F 14F 15F 16F A00M 266 285 304 323 28 47 66 85 104 123 142 161 180 199 218 237 256 275 294 313 B00KM 322 345 368 391 34 57 80 103 126 149 172 195 218 241 264 287 310 333 356 379 C00KM 42 70 98 126 154 182 210 238 266 294 322 350 D00KM 49 84 119 154 189 224 259 294 Model / Item K K1 M (Pilot) M1 (Sol) Q R S T U V W X Y A00M 139.4 81 96 154.5 1/4 30 29 14 9 79 25 27 B00KM 170 92 111 189 1/4 43 32 30.5 14.5 9 93 26 35 C00KM 188.8 111 130 208 3/8 56 48 37.5 13.5 11 99.5 30 D00KM 221.8 142 163 243 1/2 68 67 52 18.5 18 112.5 38 50 P
Pilot Operated, General Purpose Solenoid Valves Specification Model K225-03 K225-04 K225-06 K225-08 K225-12 K225-14 K225-20 Fluid Operation Type Material of Seal Air, Water & Oil Pilot Normally Open & Normally Closed NBR Orifice mm 13 13 25 25 38 38 50 Flow Rate l/pm 55 63 100 160 370 0 5 Port Size 3/8 1/2 3/4 1 1.1/4 1.1/2 2 Fluid Viscosity 50 CST Max Pressure 0.05 to 0.98MPa (7-142psi) Symbols Normally Closed Normally Open Working Pressure Temperature 0.15MPa -5 to +80 C Ordering Code K 2 2 5 0 3 230AC NO Code Port Size Voltage Operation Two position, two way, brass, pilot operated solenoid 03 : 3/8 04 : 1/2 06 : 3/4 08 : 1 12 : 1.1/4 14 : 1.1/2 20 : 2 230AC : 230/50V AC 110AC : 110/50V AC 24AC : 24/50V AC 24DC : 24V DC 12DC : 12V DC NO : Normally Open NC : Normally Closed Product Features 1 2/2 operation. 2 Sizes 3/8 to 2 BSPP. 3 Available in both Normally Open and Normally Closed functions. 4 Valve Timer optional. 5 Spare coils available in: 230/50V AC 110/50V AC 24/50V AC 24V DC 12V DC 23
Pilot Operated, General Purpose Solenoid Valves Flow Charts K225-03 K225-04 Operating Pressure (Mpa) Operating Pressure (Mpa) Flow L/min Flow L/min K225-06 K225-08 Operating Pressure (Mpa) Operating Pressure (Mpa) Flow L/min Flow L/min Dimensions Model Port A mm B mm C mm K225-03 3/8 66.5 106.5 48.0 K225-04 1/2 66.5 106.5 48.0 K225-06 3/4 72.0 113.0 58.0 K225-08 1 96.0 121.0 70.0 K225-12 1.1/4 128.0 145.5 96.0 K225-14 1.1/2 128.0 145.5 96.0 K225-20 2 161.0 160.5 112.0 24
Valve Timer For use with General Purpose Pilot Operated Valves K225 Specification / Ordering Code Model Voltage Range Protection Class KVT 24 to 2V IP65 Product Features 1 Suitable for use with Pilot Operated General Purpose Solenoid Valves K225. 2 Also Suitable for DIN 43650B Socket Type Coil. 3 Can be used with both Normally Open & Normally Closed. 25
26
Direct Acting, General Purpose Solenoid Valves Specification Model K2W025-06 K2W025-08 K2W0-10 K2WH012-06 K2WH012-08 K2WH020-10 Fluid Operation Type Material of Seal Air, Water & Oil Direct Acting Normally Closed NBR Orifice mm 2.5 2.5 4 1.2 1.2 2 Flow Rate l/pm 3. 3. 6.00 0.70 0.70 1.70 Port Size 1/8 1/4 3/8 1/8 1/4 3/8 Fluid Viscosity 20 CST Max Pressure 0.00 to 0.98MPa (0-142psi) 0.00 to 3.MPa (0-497psi) Working Pressure 0.00 to 0.68MPa (0-99psi) 0.00 to 1.96MPa (0-284psi) Temperature -5 to +80 C Symbol Normally Closed Ordering Code K 2 W H 025 06 230AC Code Pressure Orifice mm Port Size Voltage Two position, two way, brass, direct acting solenoid Blank : Standard H : High Pressure 012 : 1.2 020 : 2.0 230AC : 230/50V AC 110AC : 110/50V AC 025 : 2.5 24AC : 24/50 V AC 0 : 4.0 24DC : 24V DC 12DC : 12V DC Flow Charts Air 06 : 1/8 08 : 1/4 10 : 3/8 Water Product Features 1 2/2 operation. 2 Sizes 1/8 to 3/8 BSPP. 3 Available in Normally Closed function. 4 Spare coils available in: 230/50V AC 110/50V AC 24/50V AC 24V DC 12V DC Flow L/min Operating Pressure (Mpa) Operating Pressure (Mpa) Flow L/min 27
Direct Acting, General Purpose Solenoid Valves Dimensions Model Port (K) A mm B mm C mm D mm K2W025-06 1/8 66.0 30.3 75.0 41.5 K2W025-08 1/4 66.0 30.3 75.0 41.5 K2W0-10 3/8 74.0 32.2 85.5 53.0 K2WH012-06 1/8 66.0 30.3 75.0.5 K2WH012-08 1/4 66.0 30.3 75.0.5 K2WH020-10 3/8 74.0 32.2 85.5 53.0 28
ISO K Sub-based Valves Solenoid Specification Model 200 Series 300 Series 0 Series 600 Series Fluid Acting Lubrication 1 Operating Pressure Internal Pilot External Pilot Control Pressure (External Pilot) Proof Pressure Air (to be filtered by µm filter element) Internal pilot or external pilot Not required 0.2-1.0 Mpa (29-145psi) 0-1.0 Mpa (0-145psi) 0.2-1.0 Mpa (29-145psi) 1.5 Mpa (215psi) Temperature -20 70ºC Port Size (Manifold) 1/4 3/8 1/2 3/4 Port Size (End Plate) 3/8 1/2 3/4 1 Voltage Range AC: ± 15% DC: ± 10% Power Consumption AC: 3.5VA DC: 3.0W Activating Time 10\20 Series 33\41ms 42\55ms 50\68ms 55\85ms (0.5MPa) Open\Close 30 C\E\P Series 38\50ms 52\62ms 52\68ms 55\85ms Insulation Class B Protection IP65 Installation Size ISO5599-1 standard 1 Note: once lubricated air is used, continue with same medium to optimise valve life span. Lubricants like ISO VG32 or equivalent are recommended. Product Features 1 Succinct appearance and compact conformation. 2 The installation size conforms to the ISO 5599/1 standard. 3 Special seals improve flow rate and enhance lifetime of product. 4 The installation direction of the pilot O-ring can be adjusted to change the acting type to internal pilot, external pilot or air control. 5 The valve(s) should be installed together with the KELM single or parallel type manifolds. 6 Easy to install various connection and installation methods for manifolds. 7 The manifold has an exhaust dampener no need to connect to separate silencer. Symbols 5/2 Solenoid/Spring 5/2 Solenoid/Solenoid 5/3 Solenoid/Solenoid, Fully Sealed Mid Position APB 5/3 Solenoid/Solenoid, Supply Sealed Mid Position COE 5/3 Solenoid/Solenoid, Centre Open Pressurised Mid Position COP Ordering Code K 5 S V 4 30 I C Model Code Valve Type Pilot Type Voltage K5SV:ISO standard solenoid valve 2 : 200 series 3 : 300 series 10 : Solenoid Spring 5/2 way 20 : Solenoid Solenoid 5/2 way I : Internal Pilot E : External Pilot A : AC220V B : DC24V 4 : 0 series 6 : 600 series 30C : Solenoid Spring Solenoid 5/3 way Fully Sealed 30E : Solenoid Spring Solenoid 5/3 way Supply Sealed 30P : Solenoid Spring Solenoid 5/3 way Centre Open Pressurised C : AC110V E : AC24V F : DC12V 29
ISO K Sub-based Valves Solenoid Flow Charts 200 Series 300 Series 0 Series 600 Series Inner Structure 30
ISO K Sub-based Valves Solenoid Dimensions 200 Series All sizes are in millimetres unless stated otherwise. Dimensions 300 Series All sizes are in millimetres unless stated otherwise. Single Solenoid Single Solenoid Double Solenoid Double Solenoid 5/3 Double Solenoid 5/3 Double Solenoid 31
ISO K Sub-based Valves Solenoid Dimensions 0 Series All sizes are in millimetres unless stated otherwise. Dimensions 600 Series All sizes are in millimetres unless stated otherwise. Single Solenoid Single Solenoid Double Solenoid Double Solenoid 5/3 Double Solenoid 32