5 Port Pilot Operated Solenoid Valve Rubber Seal. Specifications Fluid Operating pressure range. 2 position single/3 position 2 position double
|
|
|
- Angela Barbra Harper
- 9 years ago
- Views:
Transcription
1 For details about certified products conforming to international standards, visit us at 5 Port Pilot Operated Solenoid Valve Rubber Seal Series VF3000 Compact and lightweight: 26.4 mm width Compact yet provides a large flow capacity: Sonic conductance C: 3.1 dm 3 /(s bar) {4/2 5/3 (A/B EA/EB)} Low power consumption: 1.8 W (DC) VF3230 (DIN terminal) VF3230 (Grommet) VF3330 (M plug connector) VF3230 (L plug connector) VF3540 (Conduit terminal) VF3122 (Grommet with bracket) Body ported VF3130 (Grommet) VF3130 (M plug connector) VF3130 (L plug connector) VF3240 (DIN terminal) Specifications Fluid Operating pressure range Ambient and fluid temperature (1) 2 position single/double Response time 3 position Max. operating 2 position single/double frequency 3 position Lubrication Mounting orientation Shock/Vibration resistance (2) Enclosure Pilot valve EXH Option 2 position single/3 position 2 position double Air 0.15 to 0.9 MPa 0.1 to 0.9 MPa 10 to 50 C (No freezing. Refer to page ) 20 ms or less (at the pressure of 0.5 MPa) 40 ms or less (at the pressure of 0.5 MPa) 10 Hz 3 Hz Not required Non-locking push, Locking slotted, Locking knob Unrestricted 300/50 m/s 2 Dustproof Individual exhaust, Common exhaust for main valve and pilot valve Note 1) Based on dynamic performance test, JIS B (Coil temperature: 20 C, at rated voltage, without surge suppressor) Note 2) Impact resistance: No malfunction occurred when it is tested with a drop tester in the axial direction and at the right angles to the main valve and armature in both energized and de-energized states every once for each condition. (Values at the initial period) Vibration resistance: No malfunction occurred in a one-sweep test between 45 and 2000 Hz. Test was performed at both energized and de-energized states in the axial direction and at the right angles to the main valve and armature. (Values at the initial period) Electrical entry AC 50/60 Hz Coil rated voltage (V) DC Allowable voltage fluctuation Note) Inrush Apparent power AC Holding Power consumption Note) DC AC Light/Surge voltage suppressor DC Option Note) At rated voltage Description Bracket Silencer Part no. DXT A AN Grommet, Grommet terminal, Conduit terminal DIN terminal, L plug connector, M plug connector 100, 200, 12, 24, 48, 110, 220, , 6, 12, 48, 100, to +10% of rated voltage 5.6 VA (50 Hz), 5.0 VA (60 Hz) 3.4 VA (50 Hz), 2.3 VA (60 Hz) 1.8 W, 2 W (With indicator light) ZNR (Varistor), Neon bulb (LED 100 V or less) ZNR (Varistor), LED (Neon bulb100 V or more) Applicable valve model For VF3122 only R 1 8 VK VZ VF VFR VP4 VZS VFS VS4 VQ7 EVS VFN JIS Symbol Single VF3130 Closed center VF3330 Exhaust center VF3430 Pressure center VF3530 VF3140 (Grommet terminal) VF3140 (Grommet) Double VF3230 VF3240 (L plug connector) VF3240 (M plug connector) Base Mounted (With sub-plate)
2 Series VF3000 Flow Characteristics/Weight Body ported (3) Base mounted Flow characteristics Model (1) (2) Type of actuation Port size 1 4/2 (P A/B) 4/2 5/3 (A/B EA/EB) C C b Cv [dm 3 b Cv /(s bar)] [dm 3 /(s bar)] VF F 2 position single 2 position single position double /8 VF position closed center VF F 3 position exhaust center 3 position pressure center 2 position single 2 position single [1.4] [0.44] [0.39] [2.5] [0.28] [0.62] position double /4 VF position closed center VF VF position exhaust center 3 position pressure center 2 position single 2 position double 3 position closed center 3 position exhaust center 3 position pressure center 2 position single 2 position double 3 position closed center 3 position exhaust center 3 position pressure center 1/4 3/ [1.4] [1.1] [1.3] [0.50] [0.45] [0.48] [0.40] [0.32] [0.38] 3.1 [2.7] [2.1] [2.3] [0.29] [0.26] [0.28] [0.66] [0.50] [0.55] 0.52 Note 1) For common exhaust type for main and pilot valve, model number will be VVF3 43, VF3 43 Note 2) In the case of body ported, exhaust port is only Rc 1/8. Note 3) With sub-plate Note 4) Weight stands for grommet type. Note 5) [ ]: Denotes normal position. How to Order Pilot Valve Assembly SF4 1 DZ 50 (A) (B) (C) (A) Coil rated voltage VAC, 50/60 Hz VAC, 50/60 Hz to 120 VAC, 50/60 Hz VAC, 50/60 Hz 5 24 VDC 6 12 VDC VAC, 50/60 Hz 9 Other Option Interchangeable with the previous model, DXT154-A-. (C) Nil B C Non-locking push type Locking type B Locking type C (B) Electrical entry, Light/Surge voltage suppressor Symbol Electrical entry Light/Surge voltage suppressor G Lead wire length GS 300 mm With surge voltage suppressor Grommet H Lead wire length HS 600 mm With surge voltage suppressor E Grommet terminal EZ T TZ D DZ DO DOZ L LZ LN LNZ LO LOZ M MZ MN MNZ MO MOZ DIN terminal L plug connector M plug connector Conduit terminal With connector Without connector With lead wire Without lead wire Without connector With lead wire Without lead wire Without connector (4) Weight (kg) Manifold Model Note) Manifold type Type EXH A, B (CYL) port VF VF3 40- B mount Type 30 Type 40 Common Common Valve Base VF3 50- Type 50 Individual Base VF Type 60, 61 Common Valve S mount VF Type 70, 71 Individual Valve Note) For common exhaust type for main and pilot valve, model number will be VF3 33, VF3 43, VF
![4 0.31 0.64 1.8 0.37 0.46 VF3122- --F 3 position exhaust center 3 position pressure center 2 position single 2 position single 2.6 3.0 [1.4] 4.0 4.0 0.37 0.42 [0.44] 0.36 0.36 0.70 0.83 [0.39] 1.0 1.](/docs-images/46/21689112/images/page_2.jpg "0 3.0 [2.5] 2.4 3.1 3.1 0.32 [0.28] 0.27 0.32 0.32 0.76 [0.62] 0.59 0.75 0.75 2 position double 4.0 0.36 1.0 3.1 0.32 0.75 1/4 VF3 30- - 3 position closed center 2.4 0.45 0.68 1.9 0.37 0.")
3 5 Port Pilot Operated Solenoid Valve Rubber Seal How to Order Series VF3000 Body option 0 Standard 3 Common exhaust type for main and pilot valve Option Port size R1, R2, Rc 1 8 Thread type Nil F N T Rc G NPT NPTF Body ported single solenoid with bracket Body ported For type 30 manifold Base mounted For type 40 manifold For type 50 manifold For type 60, 61 70, 71 manifold Type of actuation 1 Single solenoid 2 Double solenoid 3 Closed center 4 Exhaust center 5 Pressure center 6 7 Body type For type 60 and 61 manifolds For type 70 and 71 manifolds VF G F VF G VF G VF G VF G Body option 0 Standard Common exhaust type for main and pilot valve Note) 3 Option Note) VF3 63 only Rated voltage VAC, 50/60 Hz 200 VAC, 50/60 Hz 110 V to 120 VAC, 50/60 Hz 220 VAC, 50/60 Hz 24 VDC 12 VDC 240 VAC, 50/60 Hz Other Option L, M plug connector: Max. 220 VAC Light/Surge voltage suppressor Nil Electrical entry G H E T D DO L LN LO M MN MO Z S Nil B C With surge voltage suppressor Grommet (Lead wire: 300 mm) Grommet (Lead wire: 600 mm) Grommet terminal Conduit terminal DIN terminal Non-locking push type Locking type B Locking type C Indicator light is not available for grommet type. W/surge voltage suppressor is available for grommet type only. L plug connector M plug connector With connector Without connector With lead wire Without lead wire Without connector With lead wire Without lead wire Without connector Option F With bracket Not installed when delivered. Port size Sub-plate Nil Port size (A, B port) R port of VF is Rc. VK VZ VF VFR VP4 VZS VFS VS4 VQ7 EVS VFN
4 Series VF3000 Construction Single solenoid Double solenoid 3 position closed center Component Parts No. q w e r t y u Description Body Adapter plate End cover Pilot body Pilot cover Piston Spool valve Material Aluminum die-casted Resin (1) Aluminum die-casted Resin Resin Resin (2) Aluminum, NBR No. i With Bracket/Body Ported: 2 Position Single Solenoid Grommet: VF3122- G- Note Platinum silver Black (3) Black 01 F Replacement Parts o Description Part no. Note Sub-plate DXT P 3 8 DXT P 1 4 Aluminum die-casted Pilot valve assembly SF Refer to How to Order on page Note 1) 3 position: Zinc die-casted Note 2) 3 position: Aluminum Note 3) 3 position: Metallic paint Sub-plate Part No. DXT P Thread type Nil Rc F G N NPT T NPTF () (EXH port) (SUP., CYL port)
5 5 Port Pilot Operated Solenoid Valve Rubber Seal Series VF3000 Body Ported: 2 Position Single Solenoid Grommet: VF3130- G- 01 Grommet terminal: VF3130- E- 01 () 2-Rc 1/8 (R1, R2 port) Conduit terminal: VF3130- T- 01 DIN terminal: VF3130- D- VF3130- Y- : Y: D: 121 ø2.3 to ø2.8 VK VZ VF VFR VP4 VZS VFS VS4 VQ7 EVS VFN ø6 to ø8 Y: ø4.5 to ø7 D: ø6 to ø8 : :
6 Series VF3000 Body Ported: 2 Position Single Solenoid L plug connector: VF3130- L - 01 Light window () 3-Rc 1/8, 1/4 () (R1, R2 port) M plug connector: VF3130- M - 01 Light window () 3-Rc 1/8, 1/4 () (R1, R2 port)
7 5 Port Pilot Operated Solenoid Valve Rubber Seal Series VF3000 Body Ported: 2 Position Double solenoid, 3 Position Closed Center/Exhaust Center/Pressure Center Grommet: VF3 30- G- 01 Grommet terminal: VF3 30- E (3 position: 155.5) 73 (3 position: 93.5) (3 position: 179) 62 (3 position: 73) () (R1, R2 port) Conduit terminal: VF3 30- T- 01 DIN terminal: VF3 30- D- VF3 30- Y- ø2.3 to ø (3 position: 93.5) : (3 position: 180.5) VK VZ VF VFR VP4 VZS VFS VS4 VQ7 EVS VFN 181 (3 position: 201.5) Y: 180 (3 position: 200) D: 181 (3 position: 201) 73 (3 position: 93.5) ø6 to ø8 73 (3 position: 93.5) Y: ø4.5 to ø7 D: ø6 to ø (3 position: 179) (3 position: 179) : :
8 Series VF3000 Body Ported: 2 Position Double Solenoid, 3 Position Closed Center/Exhaust Center/Pressure Center L plug connector: VF3 30- L (3 position: 181) 150 (3 position: 170.5) 73 (3 position: 93.5) Light window () 3-Rc 1/8, 1/ (3 position: 179) 62 (3 position: 73) () (R1, R2 port) M plug connector: VF3 30- M (3 position: 204.5) 73 (3 position: 93.5) Light window () 3-Rc 1/8, 1/ (3 position: 179) 62 (3 position: 73) () (R1, R2 port)
9 5 Port Pilot Operated Solenoid Valve Rubber Seal Series VF3000 Base Mounted (With sub-plate): 2 Position Single Solenoid Grommet: VF3140- G- 03 Grommet terminal: VF3140- E- 03 ø2.3 to ø2.8 Conduit terminal: VF3140- T- 03 DIN terminal: VF3140- D- VF3140- Y- : VK VZ VF VFR VP4 VZS VFS VS4 VQ7 EVS VFN ø6 to ø8 Y: ø4.5 to ø7 D: ø6 to ø8 : :
10 Series VF3000 Base Mounted (With sub-plate): 2 Position Single Solenoid L plug connector: VF3140- L - 03 Light window () Light window () M plug connector: VF3140- M - 03 Light window () Light/Surge voltage suppressor
11 5 Port Pilot Operated Solenoid Valve Rubber Seal Series VF3000 Base Mounted (With sub-plate): 2 Position Double Solenoid, 3 Position Closed Center/Exhaust Center/Pressure Center Grommet: VF3 40- G- 03 Grommet terminal: VF3 40- E- 03 Manual override VK 135 (3 position: 155.5) (3 position: 179) 160 (3 position: 180.5) Conduit terminal: VF3 40- T- 03 DIN terminal: VF3 40- D- VF3 40- Y- : Y: 180 (3 position: 200) D: 181 (3 position: 201) ø2.3 to ø2.8 VZ VF VFR VP4 VZS VFS VS4 VQ7 EVS VFN 181 (3 position: 201.5) ø6 to ø8 Y: ø4.5 to ø7 D: ø6 to ø8 :
12 Series VF3000 Base Mounted (With sub-plate): 2 Position Double Solenoid, 3 Position Closed Center/Exhaust Center/Pressure Center L plug connector: VF3 40- L - 03 Light window () 150 (3 position: 170.5) (3 position: 181) M plug connector: VF3 40- M - 03 Light window () 184 (3 position: 204.5)
Inrush Apparent power (VA) Flow Characteristics/Weight. Port size Rc. Valve model VS3115-01 VS3115-02 VS3110-02 VS3110-03 VS3114-00.
Port Direct Operated Solenoid Valve Series VS5/0 Metal Seal Multiple pressure supply is possible with balanced spool sleeve. Any given port can accept high or low pressure supply without affecting the
3 Port Solenoid Valve
Port Solenoid Valve Series V00 Rubber Seal Power consumption 0. W (with power saving circuit) VV0 VV00 V00 -V F VS temperature rises: C (with power saving circuit) Sonic conductance Series Standard Large
5 Port Pilot Operated Solenoid Valve Metal Seal, Body Ported. Flow characteristics 1 4/2 (P A/B) 4/2 5/3 (A/B R1/R2)
For details about certified products conforming to international standards, visit us at www.smcworld.com. 5 Port Pilot Operated Solenoid Valve Metal Seal, Body Ported Model position position Type of actuation
3 Port Solenoid Valve
ubber Seal ort Solenoid Valve Series SYJ00/00/700 [Option] SYJ VQZ V VG Improved pilot valve ilot valve cover is stronger using stainless steel. Mounting thread is also reinforced from size M1.7 to M.
0.35 0.9. 3 Port Solenoid Valve. Series VQZ100/200/300. Compact, High Flow. Power consumption: 0.35 W/0.9 W SYJ VQZ VP VG VP3
Port Solenoid Valve 00/00/00 Metal Seal Rubber Seal 0. 0.9 (Standard) (High pressure type, High speed response type) Power consumption: 0. W/0.9 W Compact, High Flow Body ported Base mounted 00 00 00 00
1.8 w 101.2. 3 Port Solenoid Valve Direct Operated Poppet Type. New. Series VT307 CAT.ES11-107A. Power consumption
Port Solenoid Valve Direct Operated Poppet Type Power consumption Vacuum applications New [Option] RoHS 4 Standard wtype (Existing product: 4.8 W) 0. kpa Energy-saving type.8 w (Existing product: W) A
NAMUR Mount Hygienic Valve
NF097-D NMUR Mount Hygienic Valve For Wash Down pplications Series VFN Features Engineered Plastic PPS Body (Polyphenylene Sulfide) provides high temperature and chemical/corrosion resistance for use in
5.0 MPa Pilot Operated 2/3 Port Solenoid Valve & Check Valve
5.0 Ma ilot Operated /3 ort Solenoid Valve & Check Valve Series VCH VCH4/4: ort VCH40: 3 ort VCHC40: Check Valve ilot Operated ort Solenoid Valve [Option] Series VCH40 Stable responsiveness Response time
5 Port Solenoid Valve
Metal Seal ort Solenoid Valve Series VQ7-6/7-8 Rubber Seal ISO Standard Size /Size VQ7-8/Single unit.6 VQ7-8/Manifold. Conforms to ISO standard /I Interface conforms to ISO standard Size (VQ7-6) and Size
Process Valve. 2 Port Valve For Compressed Air and Air-hydro Circuit Control
Process Valve Series VN Port Valve For Compressed ir and ir-hydro Circuit Control Exclusively for air pressure system and air-hydro circuit control Universal Port Valve [Option] Cylinder actuation by external
Electrically operated valves Series M-05, 3/2-, 5/2- and 5/3-way G1/8 650 and 750 Nl/min (0.661 and 0.762 Cv)
Electrically operated valves Series M-05, 3/2-, 5/2- and 5/3-way G1/8 650 and 750 Nl/min (0.661 and 0.762 Cv) Order code Series and function M-05-310-HN-442 Standard coil HN at ports 2 + 4 HN at ports
Single sub-base valve
solenoid valves Mini-valves 10 mm Electrical connection... Mounting... Port sizes... Rated temperature... Fluid... Working pressure... Nominal flow... Pneumatic connections Voltage... Power... NC poppet
Precision Regulator. Series IR1000/2000/3000 ARJ AMR ARM ARP IR IRV VEX1 SRH SRP SRF ARX20 VCHR ITV IC PVQ VER VEA VY2 AP100.
Precision Regulator Series // Basic Type Air Operated Type Series Model Regulating pressure range Page Series Series Series Series Series.5 to MPa. to MPa. to.8 MPa /8 55.5 to MPa. to MPa /4 55. to.8 MPa.
Cartridge Valves. Solenoid Valves. Vickers. Screw-in Cartridge Valves. Maximum Pressure 210 bar (3000 psi) Maximum Flow 227 l/min (60 USgpm)
Vickers Cartridge Valves Solenoid Valves Screw-in Cartridge Valves Maximum Pressure bar ( psi) Maximum Flow 7 l/min (6 USgpm) Rev /99 77 Introduction For over seventy years, Vickers has provided its customers
4/2-Way Pneumatic Solenoid Valve
4/2-Way Pneumatic Solenoid Valve Robust servo assisted piston valve Service friendly manual override Single or block assembly Explosion-proof versions Type 5413 cam be combined with Type 2508 Cable plug
3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics
3/2-, 5/2-5/3-way Solenoid Valves for process pneumatics Type 6518 stard High flow-rate capacity Reduced power consumption Single or manifold mounting stard Type 6518/6519 can be combined with... Stard-,
3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve
3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve Type 6518 Type 6519 Type 6518/6519 can be combined with... Single or block mounting Suitable for outdoor and chemical atmospheres Suitable for
3 WAY (3/2) POPPET VALVES FOR AIR AND VACUUM SERVICE SOLENOID OR AIR ACTUATED BROCHURE N-223
3 WAY (3/2) POPPET VALVES FOR AIR AND VACUUM SERVICE SOLENOID OR AIR ACTUATED BROCHURE N-223 HERION S HIGH PERFORMANCE POPPET VALVES For those applications requiring high Cv, fast response times, large
type V46, solenoid or pneumatic operated
SPECIFICATION general type of construction spool valve operator solenoid or pneumatic operated or by manual override. Manual override is equipped with a monostable function (push) and a bistable function
UM/22000 5/2 or 5/3 Solenoid and air pilot actuated soft spool valves
U/ / or / > > Sub-base mounted, 99- s,, or > > Steel reinforced main seals > > Low power coils (,W) > > Wide range of sub-bases and accessories > > 6 bar and bar NOO solenoid pilots with locking or non-locking
Specifications. Model Flow type Pressure type. Air Maximum operating pressure. 1.0 MPa Ambient and fluid temperature. 3% F.S.
Electro-Pneumatic Proportional Valve Series /VEP Electro-pneumatic proportional valve: Flow type () Controls the flow rate steplessly according to current. (It is a / port valve that has an electrical
Valves. Sub-Base Mounted Valves to ISO 5599/2
Valves Sub-Base Mounted Valves to ISO 5599/2 General Information ISO 1, ISO 2 and ISO 3 valve series incorporate the famous Numatics lapped spool and sleeve for ultimate service life. Due to the great
-10 +45 C 50 μm filtered air, with or without lubrication spool 10 bar G/18 G1/4 6,5 8,5 890
CL/CM UNIVERSAL Valves G1/8 - CHARACTERISTICS -10 +45 C 50 μm filtered air, with or without lubrication spool 10 bar G/18 6,5 8,5 890 1480 die-cast zamak (G1/8), aluminium () NBR aluminium AA series/u1-u,5
% ^ ) 0.55 W Low Power Solenoid Valves Aluminum, Brass, or Stainless Steel Bodies 1/4" to 1" NPT. 2/2 3/2 4/2 5/2 5/3 SERIES Low Power
.55 W Solenoid Valves Aluminum, Brass, or Stainless Steel Bodies /" to " NPT / 3/ / 5/ 5/3 Features Molded one-piece solenoid with highly efficient solenoid cartridge and.55 W low wattage coil Standard
Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv)
Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv) Order code Series and function 1) Plug socket see page 5.042. MN-06-310-HN-442 Standard coil 1) 441 = 12 V DC, 4.2 W 442 = 24 V DC,
On-off valves MS-EM/EE, MS series, NPT
On-off valves MS-EM/EE, MS series, NPT On-off valves MS9-EM, MS series, NPT Peripherals overview 5 3 4 aa -H- Note Additional accessories: Module connector for combinations with size MS6, MS9 or size MS12
97300 NAMUR series, 3/2 & 5/2 Indirect solenoid actuated spool valve
9700 NAMUR series, / & / > > Port size: G/, / NPT, NAMUR Interface > > Crossover-free switching > > Main application: Single and double acting actuators > > / way valve usable as / way valve > > Manual
Assisted lift operated 2/2-way solenoid valves Type EV250B
MAKING MODERN LIVING POSSIBLE Data sheet Assisted lift operated 2/2-way solenoid valves Type EV250B EV250B with assisted lift can operate from zero and up to 10 bar differential pressure. This 2/2-way
Electro-pneumatic control valves
Electropneumatic control valves 7 Miniature solenoid valves for alternating current Conform to the Low Voltage Directive or mounting on subbase or footprint in accordance with CNOMO recoendation E 066120N
RPE3-04. Functional Description HA 4014 10/2010. Directional Control Valves Solenoid Operated. Replaces HA 4014 12/2007
Directional Control Valves Solenoid Operated RPE3-04 Size D 04 (02) 320 bar (4600 PSI) 30 L/min(8.0 GPM) HA 4014 10/2010 Replaces HA 4014 12/2007 4/3-, 4/2- way directional control valves with solenoid
SPOOL & SLEEVE VALVES solenoid air operated monostable / bistable function threaded ports G 1/8-G 1/4
SPOO & SV VAVS monostable / bistable function threaded ports -G 1/ 5/-5/3 Series 1 FATURS Reliability: steel spool & sleeve technology with long service life Robust valve design, particularly recommended
3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve
3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve Type 6518 Type 6519 Type 6518/6519 can be combined with... Single or block mounting Suitable for outdoor and chemical atmospheres Suitable for
size 3 15 4200 size 4 19 6600
BE/BE ISO 99/ Valves - Compliance with ISO 99/ international standards - Full range: - - - size - Two different internal commutation system: mixed and spool, appreciated for decades thanks to their maximum
Sensors. Sensors. All Cylinders. Specifications. Features: Features Type REED HALL EFFECT NPN or PNP. Ø8mm - 125mm
Specifications Features Type REED HALL EFFECT NPN or PNP Applicable Series Configurations Construction Materials Body Mounting Bracket Cable Characteristics Operating Temperature Accuracy All Cylinders
Fluid. Flu. Fluid Fluid. uid Power d Power P. Fluid Power P. Fluid Power. Fluid Power Power. d Power. Directional Cetop Valves DCV 03.
Catalogue Directional Cetop Valves DCV 03 Power Flu uid Power d Power P wer Power Power Power Power Power d Power Power Power ower Power Power wer Power Power P Power Power Powe d Power Power Power Power
Check Valves. Pilot Operated Check Valves. Vickers. PCGV-6/8, 10 Series; PCG5V-6/8, 20 Series. Typical Section. Features and Benefits
Vickers Check Valves Pilot Operated Check Valves PCGV-6/8, 10 Series; PCG5V-6/8, 20 Series Typical Section Typical PCG5V model with internally drained pilot piston internal leakage through the closed pilot
G1/4 Q8. Standard with biased position
Contents Version Actuation Page Characteristics Dimensions x / Way Valves pneumatic 6,7, 0 9 electric 6,7 9, 9 / Way Valves pneumatic 6,7, 0 electric 6,7, 0 / Way Valves pneumatic 6,7,, 6, 7 electric 6,7,,
Valve systems Base plates, according to standard ISO 5599-1. Brochure
ISO 5599-1 Brochure 2 ISO 5599-1 Single subbase Single subbase, thread connections on the side standard: ISO 5599-1 Frame size: ISO 1 - ISO 4 compressed air connection output: G 1/4 - G 1 Reversed pressure
3/2-way Solenoid Valve, direct-acting, NC or NO
3/2-way Solenoid Valve, direct-acting, NC or NO Electrical connection cable plug, Form A With or without manual override as standard Threaded port and sub-base s Impulse optional Type 6014 can be combined
UM/22000 5/2 & 5/3 valves, solenoid and pilot actuated ISO 5599-1, ISO size 1, 2, 3 & 4 Sub-base mounted
U/ / & / valves, solenoid and pilot actuated ISO 99-, ISO size,, & Sub-base mounted Steel reinforced main seals 6 bar and bar NOO solenoid pilots with locking or non-locking manual override Low power coils
Pressure Relief. Pressure Relief and Sequence Valves CG2V-6/8, 10 Series; CG5V-6/8, 20 Series. Vickers. Features and Benefits.
Vickers Pressure Relief Pressure Relief and Sequence Valves CG2V-6/8, 1 Series; CG5V-6/8, 2 Series Typical Section CG2V-6*W-1 relief valve Basic Characteristics Maximum pressure.......... 35 bar (5 psi)
Direct Operated Regulator for 6.0 MPa (Relieving Type) How to Order. Body size 30 40
Direct Operated Regulator for (Relieving Type) Series Service life: 0 million cycles Using NSF-H-certified grease on the guide ring (sliding) part. Improved durability under a high environment with a polyurethane
4 Posiflow Proportional Solenoid Valves
4 Posiflow Solenoid Brass or Stainless Steel Bodies 1/4" to 1/2" NPT 2/2 Features Flow rates adjustable between 0% and 100% of rating Flow rate can also be regulated by a range of electrical inputs (sensors,
SOLENOID VALVES AND PNEUMATIC VALVES
2 A S E R I E S Catalogue 2005-2006 Directly operated solenoid valves Series A 2/2 way, 3/2 way monostable, bistable (with magnetic memory) Ports M5,, cartridge ø4 The Series A solenoid valves are of the
Electro-Pneumatic Bus Door Control Mechanism
Electro-Pneumatic Bus Door Control Mechanism Application and Feature 1. Pneumatic Door Mechanism actuates the open/close movements of bus door through two double acting cylinders and two linkages with
Line-Mounted Valves L Series
Spare Part Kit for Valve Series B1LSAD3 Line-Mounted L Series Accessories Spare Part Kits All Series Valve Series B1LSAD3 40.1609 Incl. O-rings, gaskets, spring or muffl er Spare Part Kit for Valve Series
2.12. page 223 2.12. Products for Explosion hazardous Environment
2.12 page 223 2.12 Products for Explosion hazardous Environment Non-electric valves for explosion 2.12.1 page 224 hazardous environment The following manually and mechanically actuated valves are available
2 WAY (2/2) AND 3 WAY (3/2) BRASS AND STAINLESS STEEL SOLENOID VALVES
2 WAY (2/2) AND 3 WAY (3/2) BRASS AND STAINLESS STEEL SOLENOID VALVES DIRECT ACTING Brochure N-289 SPECIFICATIONS Port Size: 1/8 and1/4 Solenoid Valve for air, oil, water and other fluids Flow Direction:
3/2-way pneumatic cartridge solenoid valve
3/2-way pneumatic cartridge solenoid valve Compact design with 11 mm width per station Orifices from 0.5 mm (9 bar) to 1.2 mm (1.5 bar) High durability and reliability Low power consumption, as well as
Denotes New Winner s Circle Product Line. Catalog HY15-3502/US SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI HIGH FLOW VALVE FAMILY
Catalog HY-5/US Contents SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. /GPM BAR/PSI HIGH FLOW VALVE FAMILY See individual catalog pages for exact specifications. WAY SPOOL TYPE GS *... X / C9-.. Position,
Solenoid Operated Directional Valves
INDUSTRIAL FLUID POWER COMPONENTS AND SYSTEMS SERIES 35 Solenoid Operated Directional Valves SF-2C-115A-35 S-1AY-12D-35 SD-2C-12D-35 Features High Flow/ High Pressure: Up to 40 gpm / 5000 psi working pressure*.
zamak nitrile rubber self-extinguishing technopolymer aluminum
PS COMBOBOX valves - Valves with compact design: valve body with integrated sub-base - High flexibility: > possibility of choosing fitting dimension (--) according to users needs > manifolds from up to
Solenoid Operated Directional Valves
INDUSTRIAL FLUID POWER COMPONENTS AND SYSTEMS SERIES 35 Solenoid Operated Directional Valves SD-2B-115A-35 SDS-2H-12D-35 S-2B-115A-35 Features High Flow/ High Pressure: Up to 25 gpm / 5000 psi working
http://www.daikinpmc.com/en/ For latest information, PDF catalogs and operation manuals Features MPa {kgf/cm 2 } 100 17.5 {175}
Solenoid Valve Features 2 For DC power supply 3 For C power supply These models realize high-pressure large-flow-rate control at 35 MPa {35 kgf/cm 2 } and 1 L/min (2) or 16 L/min (3). They are best suited
System 8. ü www.nassmagnet.com ( +49 511 6746-0. System 8
System 8 ü www.nassmagnet.com ( +9 11 7-0 System 8 The name System 8 stands for a modular system of solenoid coils, armature systems, solenoid operators and solenoid valves. The diameter of the armatures
2/2 and 3/2 Way Size 6 Seat Valves
2/2 and 3/2 Way Size 6 Seat Valves Directly operated Interface and subplate dimensions according to DIN 24340 and ISO Line connection port size G 3/8" Cartridge design PN [p max. ] = 315 bar 7501856.06.12.08
Chapter 6: Check Valves
Contents Chapter : Check Valves Series Description Size Mounting Page Parker Standard DIN / ISO 1/8 1/4 3/8 1/2 3/4 1 0 10 1 25 32 Shuttle valves SSR -2 Check valves, direct operated RK / R CS SPZE SPV
Proportional pressure regulators VPPE
Proportional pressure regulators VPPE Proportional pressure regulators VPPE Product range overview Function Version Pneumatic connection Proportional pressure regulator Nominal size for pressurisation/
Cable Plug acc. to DIN EN 175301-803, Form A
Cable Plug acc. to DIN EN 175301-803, Form A Complete program Contact form 18 mm Also available with LED indicator Optional 4-pin version for pressure switch or impulse valves respectively Versions with
PA5. Series. Quick-Connect Cables with Connectors. Simplifies sensor wiring. Wide variety of connectors attached to cables.
Quick-Connect Cables with Connectors PA Simplifies sensor wiring. Wide variety of connectors attached to cables. Series No wiring or staking work needed Shorter replacement time in unlikely event of sensor
ISO 15407-1/2 (VDMA 24563) ISO 02 (18 mm) - ISO 01 (26 mm) Valves
BD ISO 0/ (VDM ) ISO 0 ( mm) ISO 0 ( mm) Valves BDE = solenoid valves ISO 0/ with integrated connection including V DC coils and connector BDB = solenoid valves ISO 0/ with external connection with M connector
STC 3S012-020-A Series Solenoid Valves
STC 3S012-020-A Series Solenoid Valves 3S012-020-A Series Solenoid Valve Specifications Valve Model 3S012-1/8-A 3S012-1/4-A 3S020-1/8-A 3S020-1/4-A Port Size (NPT) 1/8 1/4 1/8 1/4 Valve Type Action 3 Way,
Capacitive Prox E2K-X
Capacitive Prox Threaded, Cylindrical Sensor Detects Metallic and Non-metallic Objects Permits non-contact detection of metallic and non-metallic objects such as glass, wood, water, oil and plastic Allows
Outdoor 33.6W Dual Port Passive Power-over-Ethernet Midspan For External Security Cameras and Wireless Access Points
Outdoor 33.6W Dual Port Passive Power-over-Ethernet Midspan For External Security Cameras and Wireless Access Points Features SELV Compliant No Detection Passive Injector Gigabit Compatible Full Protection
zamak nitrile rubber self-extinguishing technopolymes aluminum
G 0 mm - G / Valves and solenoid valves - G/ threaded valve body with traditional Univer spool system - Version with integrated connection and esternal connection - Compact design - High flow rate - Versions
Control block VOFA with safety function
Key features Innovative Versatile Reliable Easy to assemble Can be used for safe reversing of a hazardous movement (5/2-way solenoid valve) Can be used for safe venting (3/2-way solenoid valve function,
Centro-Matic Automatic Lubrication Systems System Controls
Selecting the right controls for your automated lubrication system is one of the last steps in the design process. Several different models may be chosen to control power-operated pumps, depending on the
E4E PILOT OPERATED DIRECTIONAL CONTROL VALVE WITH ELECTRIC PROPORTIONAL CONTROL SERIES 51
83 300/100 ED E4E PILOT OPERATED DIRECTIONAL CONTROL VALVE WITH ELECTRIC PROPORTIONAL CONTROL SUBPLATE MOUNTING CETOP P05 p max 250 bar Q max (see specification table) MOUNTING INTERFACE OPERATING PRINCIPLE
33.6W Power over Ethernet Waterproof Adapter PoE Plus Single Port Injector for Outdoor Application
33.6W Power over Ethernet Waterproof Adapter PoE Plus Single Port Injector for Outdoor Application Features Compliant with the IEEE802.3at Standard -40 to +60 C Temperature Range Diagnostic LEDs Full Protection
Pressure Switch for gas and air
Switch for gas and air GAO-A4 GMH-A4 GML-A4 UL Listed UL 353 File # MH 16628 CSA Certified CSA C22.2 No. LR 53222 Certification file # 201527 FM Approved Class 3510, 3530 File # J.I. 1Y919.AF Commonwealth
Solenoid valves Type EVU
Data sheet Solenoid valves EVU EVU solenoid valves are designed to fit into compact refrigeration systems. Available in direct and pilot operated versions, they can be applied in liquid, suction, and hot
Vacuum Module: Series ZX Vacuum Ejector System/External Vacuum Supply System
Module: Series ZX Ejector System/External Supply System ZX ZR ZM Suitable for handling electronic components and precision components up to 100g Modular Design Customized application function through selection
Coil Classification: Class F standard, Class H available Class B standard on V9xx models
Direct Acting & Pilot Operated Valves 1/8" - 1/2" General Description: Direct Acting and Pilot Operated valves are used in applications for actuation of double acting cylinders and piloting of larger control
Solenoid Valve Type 3962
Solenoid Valve Type 362 x d, x em or without explosion protection, for controlling pneumatic actuators General The Type 362 Solenoid Valve ensures a high level of operational reliability for controlling
Water Separator. Main Line Filter. Mist Separator. Micro Mist Separator 150C 250C 350C 450C AMG 550C 2C 4C 8C 11C AFF 22C 37B 75B 150C 250C 350C 450C
Water droplet removal Water Separator Water droplet separation rate: % Model Flow capacity l/min (ANR) Max. flow capacity at 0.7 MPa inlet pressure 300 750 1,500 AMG 2,0 AMG to AMG/ Large dust particle
Compact cylinder Double acting single rod type. SSD SSD-L (with switch) Double acting Compressed air 1.0. 1.6-10 to 60 (no freezing) Rc1/8 Rc1/4 Rc3/8
* U S 4 Specifications escriptions Bore size mm Actuation Working fluid ax. working pressure Pa in. working pressure Pa Withstanding pressure Pa Ambient temperature Port size Stroke length Rubber cushioned
Solenoid Valve Island Type 3965
Solenoid Valve Island Type 365 for the control of pneumatic actuators General The Type 365 Solenoid Valve Island is a compact solution for the centralized control of pneumatic actuators in chemical and
BERMAD Waterworks. Quick Active Check Valve. 700 Series. Model 740Q. Features and Benefits. Major Additional Features
Booster Pump Control Valve Quick Active Check Valve Isolates system from the effects of pump starts and stops for: Solitary single speed pumps Battery of single speed pumps (add & switch) Battery of variable
Example of use: Fuse for a solenoid valve. If the fuse is defective, no information is sent to the electronic component.
Overview Switch and button modules The dimensions of the switch and button modules are adapted to the electronic components in the integral housing. The modules are equipped with the universal clip-on
Directional seated valves type VP 1
Directional seated valves type VP 1 zero leakage, intended for general hydraulic applications and grease lubing systems Flow Q max Operation pressure p max = 15 lpm = 400 bar Individual valve Individual
Table of Contents. MicroAir Series...3-9
Table of Contents MicroAir Series...-9 Technical and Operating Data.... How to Order.... Valve on ndividual Base... 5 Manifold Assemblies... 6 End Plate Kits... 7 Blank Station Plate Kit.... 7 Blocking
3/2- and 2/2-way cartridge valve type BVE
3/2- and 2/2-way cartridge valve type BVE for any flow direction, zero leakage, all ports pressure resistant Flow Q max = 70 lpm Perm. pressure p max = 400 bar Additional valves with same function: ' Type
3/2-way Mini Solenoid Valve
3/2way Mini Solenoid Valve Directacting 0... bar DN mm... DN mm,,, subbase, banjobolt connection 21mm coil spacing when mounted on manifold Type can be combined with... Type 20 Type 207 Type able plug
Series 427. 1/16 DIN Multi-Mode Bar Graph Display Timer TIMERS PRODUCT HIGHLIGHTS
Series 427 1/16 DIN Multi-Mode Bar Graph Display Timer PRODUCT HIGHLIGHTS Digital Setting with 0.1% Accuracy Unique LED Bargraph Indicates Time Cycle in 20% Increments 8 Field Selectable Modes of Operation
zamak nitrile rubber selfestinguishing technopolymer aluminum B10 24 V DC (± 10%) holding 0,32 W, pick-up 5,5 W (25 ms) IP65 button with tool
P0 0mm COMPCT valves - threaded body and for sub-base mounting - Low standard power consumption (0,W): low power consumption electropilot B0 (standard version with LED) - Quick response times - High flow
Proximity Switches RS (Reed Switch)
Proximity Switches RS (Reed Switch) General Pneumatic systems can often be combined with electric control circuits. The position of the piston in the cylinder can then be sensed by means of a proximity
DIRECTIONAL CONTROL VALVES
Series 35 High Flow High Pressure Directional Valves D05SD DIN Type D05S Electrical Box Type D03SD DIN Type D03S Electrical Box Type D03SL Lead Wire Type (D05SL Lead Wire Type Also available) FEATURES
SOLENOID VALVES 3-4 WAY
SOLENOID VLVES - WY IE/C// CT: FP/VCR Page: 7 SHEET: / SOLENOID VLVES - - WY CV SOLENOID VLVES -WY/-POSITION /- UNF.7 5.7 The electric valve is a -way -position directional electrically controlled Slight
Unit 24: Applications of Pneumatics and Hydraulics
Unit 24: Applications of Pneumatics and Hydraulics Unit code: J/601/1496 QCF level: 4 Credit value: 15 OUTCOME 2 TUTORIAL 4 DIRECTIONAL CONTROL VALVES The material needed for outcome 2 is very extensive
Position Transducers with Restoring Spring 10, 25, 50, 75, 100 mm TR, TRS Series
Position Transducers with Restoring Spring 10, 25, 50, 75, 100 mm TR, TRS Series Special features long life 100 x 10 6 movements outstanding linearity up to ±0.075% choice of plug or cable connection DIN
PILOT OPERATED PRESSURE RELIEF VALVE - Series VR4V
PILOT OPERTED PRESSURE RELIEF VLVE - Series VR4V The Veljan Pressure Relief Valve series VR4V are pilot operated and wk Internal Dra on the prciple of hydraulic balancg. These valves are used to limit
Number of poles 1-pole 2-pole Minimum Enclosure Contact. G2R-1AZ G2R-1Z DC Fully sealed G2R-1AZ4 G2R-1Z4 G2R-1A-E G2R-1-E
PCB Power elay The Best Seller eneral purpose power elays of single-pole0 A and double-pole A. Safety-oriented design with dielectric strength of,000 V between coil and contacts, and surge resistance of
Series VM. Mechanical Valves VM200. VM1000 Side ported 11 x 36 x 16 Bottom ported 11 x 28 x 25
Mechanical Valves Series VM Model Dimensions (mm) VM1000 Side ported 11 x 36 x 16 Bottom ported 11 x 28 x 25 VM100 Side ported 17 x 44 x 25 Bottom ported 17 x 44 x 30 VM200 25 x 40 x 52 One way roller
Safe switching and monitoring Solenoid Interlocks
Safe switching and monitoring Solenoid Interlocks Solenoid locking switches are used on sliding, hinged and removable guard doors that must be closed and locked for operator safety. It is a two part system
Pressure Relief. Pressure Relief Valves. Vickers
Vickers Pressure Relief Pressure Relief Valves Remote Controls, Relief and Sequence Valves, and Single and Multiple Pressure Solenoid and Air Operated Relief Valves 511./EN/1297/A Introduction Remote Controls
Control- and feedback head for integrated mounting on Robolux valves Type 2036
Control- and feedback head for integrated mounting on Robolux valves Type 203 Type 885 Type 88 can be combined with Compact stainless steel design Contactless valve position registration Coloured illuminated
XE70 SERIES VC SERIES BALANCED HYDRONIC VALVES 2-WAY AND 3-WAY
XE70 SERIES VC SERIES BALANCED HYDRONIC VALVES 2-WAY AND 3-WAY PRODUCT SPECIFICATION SHEET switched off. This results in energy savings during mild weather. Normal control will resume when T3 fails to
3/2 Solenoid Cartridge Valve, Size 6
/ Solenoid Cartridge Valve, Size 6 Q max = l/min, p max = 5 bar Bidirectional seat-valve shut-off, direct acting Guided valve spool and poppet Two spool variants are available Available in two mounting