3 Port Solenoid Valve

Transcription

1 ubber Seal ort Solenoid Valve Series SYJ00/00/700 [Option] SYJ VQZ V VG Improved pilot valve ilot valve cover is stronger using stainless steel. Mounting thread is also reinforced from size M1.7 to M. V Cover (stainless steel) Flow Characteristics Series SYJ00 SYJ00 SYJ700 Flow characteristics C [dm /(s bar)] b Cv

2 ubber Seal ort Solenoid Valve Series SYJ00/00/700 Variations Series ort size Sonic conductance C [dm /(s bar)] Type of actuation Voltage Electrical entry Option Light/surge voltage suppressor Manual override SYJ00 M x 0. Effective area 0.9 mm ( ) Grommet Body ported.17 SYJ00 0. ( ) L plug connector Base mounted.1 SYJ700. SYJ00.17 SYJ00.1 SYJ700. ( ) 0. ( ) 1. ( ) N.C. N.O. For DC VDC 1 VDC VDC VDC VDC For C 0 0 VC 0 Hz 0 1 VC 0 Hz 0 0 VC 0 Hz 0 VC 0 Hz M plug connector DIN terminal (SYJ00, 700 only) M connector For DC With surge voltage suppressor With light/surge voltage suppressor Note) For C With light/surge voltage suppressor Nonlocking push type ushturn locking slotted type ushturn locking lever type, 1/.7 ( ). Note) ll C voltage models have builtin surge voltage suppressor. 170

3 Series SYJ00/00/700 Manifold Variations port size Valve series port location, ports size M M With onetouch fitting pplicable tubing O.D. ø ø ø N N7 N9 Body ported Base mounted SYJ00.17 SYJ00.19 SYJ700.1 SYJ00.17 SYJ00.19 SYJ700.1 Top Top Top Side Bottom Side Bottom Side 1/ 1/ 1/ Note 1) Note ) Note 1) Note 1) Note 1) Note 1) Only for internal pilot Note ) Only for external pilot Base mounted Base mounted Base mounted Body ported Body ported Body ported Series SYJ00 Series SYJ00 Series SYJ700 SYJ VQZ V VG V 171

4 ubber Seal ort ilot Solenoid Valve Series SYJ00 Specifications JIS Symbol Body ported Base mounted Fluid Operating pressure range (Ma) Internal pilot ir 0.1 to 0.7 mbient and fluid temperature ( C) Note 1) esponse time ms (at 0. Ma) Max. operating frequency (Hz) Manual override (Manual operation) ilot exhaust method to 0 (No freezing. ) 1 or less Nonlocking push type, pushturn locking slotted type, pushturn locking lever type Individual exhaust for the pilot valve, common exhaust for the pilot and main valve Lubrication Mounting orientation Shock/Vibration resistance (m/s Note ) ) Enclosure Not required Unrestricted /0 Dust proof ( M connector conforms to I.) Based on IEC09 Note 1) Based on dynamic performance test, JIS B (Coil temperature: C, at rated voltage, without surge voltage suppressor.) Note ) Impact resistance: No malfunction occurred when it is tested in the axial direction and at the right angles to the main valve and armature in both energized and deenergized states every once for each condition. (Value in the initial state) Vibration resistance: No malfunction occurred in one sweep test between and 00 Hz. Test was performed at both energized and deenergized states in the axial direction and at the right angles to the main valve and armature. (Value in the initial state) Solenoid Specifications Internal pilot SYJ1 SYJ () 1 ()() External pilot SYJ1 SYJ () 1 ()() () 1 () () () 1 () () Made to Order (For details, refer to pages 1 to 1.) Electrical entry Coil rated voltage (V) ower consumption (W) pparent power (V) DC C DC C 0 /0 Hz llowable voltage fluctuation Standard With power saving circuit 0 V 1 V [11 V] 0 V V [0 V] Surge voltage suppressor Indicator light Grommet (G), (H), L plug connector (L), M plug connector (M), M connector (W), 1,,, 0, 1, 0, ±% of rated voltage 0. (With light: 0.) 0.1 (With light only) 0.7 (With light: 0.1) 0. (With light: 0.9) [0.9 (With light: 0.97)] 1.1 (With light: 1.) 1.0 (With light: 1.) [1. (With light: 1.)] Diode (varistor when nonpolar types) LED In common between 1 VC and 11 VC, and between VC and 0 VC. For 11 VC and 0 VC, the allowable voltage is 1% to % of rated voltage. S, Z and T type (with power saving circuit) should be used within the following allowable voltage fluctuation range due to a voltage drop caused by the internal circuit. S and Z type: VDC: 7% to % 1 VDC: % to % T type: VDC: % to % 1 VDC: % to % 17

5 ubber Seal ort ilot Solenoid Valve Series SYJ00 Flow Characteristics/Mass Valve model Body ported Base mounted (with subplate) SYJ1 SYJ SYJ1 SYJ Flow characteristics Type of ort 1 ( ) ( ) actuation size C [dm /(s bar)] b Cv C [dm /(s bar)] b Cv N.C. M x 0. N.O. N.C. N.O Note) Value for DC. dd 1 g for C. ( ): Without subplate Effective area (mm ) 0.9 Grommet () Mass (g) Note) L/M plug connector () M connector 7 (7) External ilot SYJ00 ilot valve pressure is supplied separately from the main valve pressure through the use of a separate supply port. It can be used in the vacuum (up to 0 ka) or low pressure line with 0.1 Ma or less. Specifications pplicable model Operating pressure range Ma Base mounted (SYJ1, SYJ) Main pressure 0 ka to 0.7 External pilot pressure 0.1 to 0.7 Mark, port port (External pilot) port Note 1) For manifold base, refer to page 17. Note ) External pilot type body ported valves (SYJ ) can only be used on the manifold. SYJ VQZ V VG V 17

6 Series SYJ00 port (For manifold type, ) Type of actuation 1 Normally closed Normally open How to Order ated voltage DC V S VDC 1 VDC VDC VDC VDC C ( 0 /0 Hz) 1 0 VC 0 VC 1 VC [11 VC] VC [0 VC] Body ported SYJ 1 M M CE compliant CE compliant For type W, DC voltage is only available. Note) CE compliant: For DC only. Note) CE compliant: For DC only. Light/surge voltage suppressor Without light/surge voltage suppressor S With surge voltage suppressor Z With light/surge voltage suppressor With surge voltage suppressor (Nonpolar type) U With light/surge voltage suppressor (Nonpolar type) For C voltage valves there is no S option. It is already builtin to the rectifier circuit. For type, U, DC voltage is only available. ower saving circuit is only available in the "Z" type. Bracket : Without bracket F : With bracket Bracket [Option] Bracket is mounted. Brackets cannot be retrofitted. External pilot type is not available. Base mounted port For subplate style, manifold type 1, S1,, S,, S Body option : Individual pilot exhaust type port, E port M: Common exhaust for the pilot and main valve SYJ 1 M Coil specifications Standard With power saving circuit T (, 1 VDC only) ower saving circuit is not available in the case of W type. Electrical entry ort size, 1,,, VDC/0, 1, 0, VC, 1,,, VDC Grommet L plug connector M plug connector M connector G: Lead wire length 00 mm L: With lead wire (Length 00 mm) M: With lead wire (Length 00 mm) : Without subplate (With gasket and screws) MN: Without lead wire M: M port With subplate WO: Without connector cable CE complaint Q CE complaint Note) CE compliant: For DC only. Manual override : Nonlocking push type port, E port ilot valve exhaust is centralized to main valve. H: Lead wire length 00 mm LN: Without lead wire LO: Without connector MO: Without connector W : With connector cable Note 1) D: ushturn locking slotted type : External pilot type 17 SYJ is only for manifold use. Note) When placing an order for body ported solenoid valve as a single unit, mounting screws for manifold and gasket are not attached. Order them separately, if necessary. (For details, refer to page 179.) LN, MN type: with sockets. efer to page 1 for the lead wire length of L and M plug connectors. efer to page 1 for the connector assembly with cover for L and M plug connectors. For connector cable of M connector, refer to page 19. M connector conforming to IEC097 is also available. efer to page 1 for details. Note 1) Enter the cable length symbols in. lease be sure to fill in the blank referring to page 19. E: ushturn locking lever type

7 ubber Seal ort ilot Solenoid Valve Series SYJ00 Construction e q t N.C. r () 1 ()() e N.O. q t () 1 () () r () () u u 1 () () w 1 () () w y y Component arts No. 1 Description Body iston plate End cover iston Spool valve assembly Material Zinc diecasted esin esin esin luminum, HNB Note White White White eplacement arts No. 7 Description Subplate Note) ilot valve art no. SYJ0091(Q) V111(T) Note) dd suffix Q for the CEcompliant product. Note Zinc diecasted How to Order ilot Valve ssembly V111 G Coil specifications Standard With power T saving circuit (, 1 VDC only) ower saving circuit is not available in the case of W type. ated voltage VDC 1 VDC V VDC S VDC VDC 1 0 VC 0/0 Hz 0 VC 0/0 Hz 1 VC 0/0 Hz [11 VC 0/0 Hz] VC 0/0 Hz [0 VC 0/0 Hz] For type W, DC voltage is only available. CEcompliant: For DC only. For C voltage valves there is no S option. It is already builtin to the rectifier circuit. For and U, DC voltage is only available. ower saving circuit is only available in the Z type. Electrical entry G H L LN LO M MN MO WO W Light/surge voltage suppressor S Z U Without light/surge voltage suppressor With surge voltage suppressor With light/surge voltage suppressor With surge voltage suppressor (Nonpolar type) With light/surge voltage suppressor (Nonpolar type) Grommet, 00 mm lead wire Grommet, 00 mm lead wire L plug connector M plug connector M connector With lead wire Without lead wire Without connector With lead wire Without lead wire Without connector Without connector cable With connector cable Note 1) For connector cable of M connector, refer to page 19. Note 1) Enter the cable length symbols in. lease be sure to fill in the blank referring to page 19. SYJ VQZ V VG V Since V111 is CEcompliant as standard, the suffix "Q is not necessary. 17

8 Series SYJ00 Body orted [ ] for C Grommet (G), (H): SYJ G H M With bracket: SYJ G H MF x ø1. (For manifold mounting) [0.] G: pprox. 00 H: pprox. 00 x ø Manual override M x 0. ( port) [] []. [0.] M x 0. (, port) (Bracket) ø1. (E port) L plug connector (L): SYJ L M M plug connector (M): SYJ M M M connector (WO): SYJ WO M. [0.7] pprox. 00 [] 1. pprox [0.9] [.1] 7. M x () 1. () 1. () efer to page 19 for dimensions with connector cable. 17

9 ubber Seal ort ilot Solenoid Valve Series SYJ00 Base Mounted (With Subplate) [ ] for C Grommet (G), (H): SYJ G H M ( port) 1 11 x ø. Manual override. 17. G: pprox. 00 H: pprox. 00. [0.] [.].. ( port) 17. (, port). 7. L plug connector (L): SYJ L M M plug connector (M): SYJ M M M connector (WO): SYJ WO M 1. [.].1 pprox. 00. [9.] pprox. 00. M x 1 SYJ VQZ V. [0.7].7.7 [0.9] VG V efer to page 19 for dimensions with connector cable. 177

10 Series SYJ00 Manifold Specifications Manifold Specifications For internal pilot Model For external pilot Manifold type (SU), (EH) Valve stations port Location orting specifications Direction, port ort size port port Note) Note) Only for external pilot Type Type Type 1, S1 Type, S Type, S Single base/b mount Common SU/Common EH to stations Valve Base Top Side 1 / M x 0. M x 0. 1 / C (Onetouch fitting ø) Flow Characteristics Body ported for internal pilot Base mounted for internal pilot Body ported for external pilot Base mounted for external pilot Manifold Type SSYJ SYJ Type SSYJ 1 S1 SYJ Type SSYJM SYJ Type SSYJC Type SSYJSM SYJ Type SSYJSC Type SSYJ SYJ Type SSYJM Type SSYJC Type SSYJSM Type SSYJSC SYJ SYJ 1(), () ort ort size Note) Value at manifold base mounted, position single acting () ort M x 0. M x 0. C C M x 0. C C 1 ( ) C [dm b /(s bar)] Flow characteristics Cv C [dm /(s bar)] ( ) b Cv Effective area (mm ) How to Order Manifold (Example) Instruct by specifying the valves and blanking plate assembly to be mounted on the manifold along with the manifold base model no. (Example) SSYJ set (manifold base) SYJ1LZM... sets (valve) SYJ set (blanking plate assembly) SSYJ0C... 1 set (manifold base) SYJ1G... sets (valve) SYJ set (blanking plate assembly) The asterisk denotes the symbol for assembly. refix it to the part nos. of the solenoid valve, etc. 17

11 ubber Seal ort ilot Solenoid Valve Series SYJ00 Combinations of Solenoid Valve, Manifold Gasket and Manifold Base Blanking late ssembly Body ported (Type SYJ ()(Q)) ound head combination screw SY0 (M1.7 x 17, Matt nickel plated) Base mounted (Type SYJ ()(Q)) ound head combination screw SY0 (M1.7 x 17, Matt nickel plated) art no.: SYJ007(Q) ound head combination screw Blanking plate Manifold gasket pplicable base SSYJ(Q) SSYJ(Q) Manifold gasket SYJ00 Manifold base Manifold gasket SYJ001 pplicable base Subplate SSYJ1(Q) SSYJS1(Q) SSYJ(Q) SSYJS(Q) SSYJ(Q) SSYJS(Q) Manifold base pplicable base Subplate SSYJ(Q) SSYJ(Q) SSYJ1(Q) SSYJS1(Q) SSYJ(Q) SSYJS(Q) SSYJ(Q) SSYJS(Q) Manifold base Note) dd suffix Q for the CEcompliant product. Caution Mounting screw tightening torques M1.7: 0.1 N m Use caution to the assembly orientation for solenoid valves, gasket and optional parts. SYJ VQZ V VG V 179

12 Series SYJ00 Manifold for Internal ilot Type Type Type 1 port M x 0. Type port, C Type port M x 0. port port port port port M x 0. port, C port port How to Order SSYJ 0 Stations How to Order Valve mounting direction ilot valve is opposite the port side. ilot valve is on the S port side. How to Order Type S Valve mounting direction ilot valve is on the ilot valve is opposite port side. the port side. ilot valve is on the S port side. port port port port 0 How to Order : stations : stations M C N F Bracket Without bracket With bracket SSYJ 1 0 M Stations 0 stations SSYJ 0 M How to Order Stations 0 stations : : stations port size ø onetouch fitting ø/" onetouch fitting SSYJ 0 0 : Stations stations : stations CE complaint Q CE complaint CE complaint Q CE complaint, port thread type c F G N NT T NTF, port thread type c 00F G 00N NT 00T NTF SSYJ 0 M : : stations, port thread type c F G N NT T NTF pplicable solenoid valve SYJ1 M(Q) SYJ1M M(Q) SYJ M(Q) SYJM M(Q) pplicable blanking plate assembly efer to page 179. Note) For more than stations, supply air to both sides of port and exhaust air from both sides of port. pplicable solenoid valve SYJ1 (Q) SYJ1M (Q) SYJ (Q) SYJM (Q) pplicable blanking plate assembly efer to page 179. Note) For more than stations, supply air to both sides of port and exhaust air from both sides of port. ilot valve pressure is supplied separately from the main valve pressure through the use of a separate supply port. It can be used in the vacuum (up to 0 ka) or low pressure line with 0.1 Ma or less. Type port M x 0. Type (External pilot type) port,c port (External pilot) Type 1 Type port (External pilot) port port Type S1 ilot valve is on the port side. ( ) ( ) Manifold for External ilot Type port port Type S ilot valve is on the ( ) port side and is of the external pilot type. port,c pplicable solenoid valve SYJ1 (Q) SYJ1M (Q) SYJ (Q) SYJM (Q) pplicable blanking plate assembly efer to page 179. CE complaint Q CE complaint Note) For more than stations, supply/exhaust air to/from both sides of port and port. pplicable solenoid valve SYJ1 M(Q) SYJ M(Q) pplicable blanking plate assembly efer to page 179. CE complaint Q CE complaint Note) For more than stations, supply/exhaust air to/from both sides of port and port. Valve mounting direction Stations ilot valve is opposite 0 stations the port side. : : S ilot valve is on the port side. stations port port size (External pilot) M port C N ø onetouch fitting ø/" onetouch fitting port Note) CE compliant: For DC only. pplicable solenoid valve SYJ1 (Q) SYJ (Q) pplicable blanking plate assembly efer to page 179. CE complaint Q CE complaint Note) For more than stations, supply/exhaust air to/from both sides of port and port. [Option]

13 ubber Seal ort ilot Solenoid Valve Series SYJ00 Type Manifold: Top orted/ssyj Stations 00 (F) [ ] for C Grommet (G). () (.) (17.) M x 0. (Bracket mounting screw) (1.7) x ø. 1. M x 0. ( port) (itch) =. 1.. [0.] x ø. (, port) Manual override pprox. 00 (Lead wire length) (Station n) (Station 1) [.].1 L plug connector (L) M plug connector (M) M connector (WO). [0.7] [0.9] SYJ VQZ V pprox. 00 (Lead wire length). [9.] M x 1. VG V pprox. 00 (Lead wire length).1 1. [.] efer to page 19 for dimensions with connector cable. Station n

14 Series SYJ00 Type 1 Manifold: Side orted/ssyj1 Stations M [ ] for C Grommet (G).1 Type S1 Manifold: Side orted (ilot valve is on the port side) / SSYJS1 Stations M. pprox. 00 (Lead wire length).. [1]. 11 x ø. (For mounting). [1]. 11 Manual override x ø. 1 (, port) pprox. 00 (Lead wire length) (itch) =. (Station n) (Station 1) Manual override (itch) =.. (Station 1) (Station n) 1. [.] [.] 1 M x 0. ( port) (itch) = (itch) =. M x 0. ( port) L plug connector (L) M plug connector (M) M connector (WO) pprox. 00 (Lead wire length) 1. [.].1 pprox. 00 (Lead wire length). [9.]..7 [0.9].9 [1.1] efer to page 19 for dimensions with connector cable. Station n 1 Station Station. 17.

15 ubber Seal ort ilot Solenoid Valve Series SYJ00 Type Manifold: Side orted/ssyj Stations M, C N [ ] for C Grommet (G) For M For C (Builtin onetouch fitting) N.1 1 pprox [.1] 0.7. [.] (itch) =.. (Station 1) (Station n) (itch) =. Manual override x ø. ( port) (, port) (, port). [.] 1. (.) (Station 1) (Station n) (itch) =. Onetouch fitting ( port) pplicable tubing O.D.: ø, ø/" L plug connector (L) M plug connector (M) M connector (WO) pprox. 00. [.].1 pprox [.].. [] [.] 1.9. efer to page 19 for dimensions with connector cable. Type S Manifold: Side orted (ilot valve is on the port side) / SSYJS Stations M, C N Grommet (G) For M For C (Builtin onetouch fitting) N (, port) 1 SYJ VQZ.9 [.1] 0.7 pprox. 00 (Station n) (itch) =. 1. (Station 1). x ø. (.) (Station n) (Station 1) (Light/surge voltage suppressor) 1. V VG V Station n Station [.].1 ( port) 7 (itch) = Onetouch fitting (, B port) pplicable tubing O.D.: ø, ø/" (itch) = Station 0.. 1

16 Series SYJ00 Type Manifold: Top orted (External ilot Type)/SSYJ Stations 00 [ ] for C Grommet (G).9 [.1] ( port) 0.7 L 17. x ø. M x 0. ( port) (, port) pprox. 00 (Lead wire length) (itch) =. 1. Manual override (Station n) (Station 1) [.] L plug connector (L) M plug connector (M) M connector (WO) pprox. 00 (Lead wire length). [] [.].1. [.] pprox. 00 (Lead wire length) 9. [.] M x 1. efer to page 19 for dimensions with connector cable. Station n L 1 Station Station...

17 ubber Seal ort ilot Solenoid Valve Series SYJ00 Type Manifold: Side orted (External ilot Type)/SSYJ Stations M,.1 C N [ ] for C Grommet (G) For M For C (Builtin onetouch fitting) N pprox. 00 Manual override [.1] 0.7 ( port). [.] 1. (itch) =. (Station 1) (Station n) x ø.. (, port) (, port). [.] 1. (.). 11. (Station 1) (Station n) (itch) =..1 ( port) (itch) = Onetouch fitting ( port) pplicable tubing O.D.: ø, ø/" L plug connector (L) M plug connector (M) M connector (WO) pprox. 00. [.].1 pprox [.] M x 1. [.] 0.7. [] (itch) = efer to page 19 for dimensions with connector cable. Type S Manifold: Side orted (ilot valve is on the port side) / SSYJS Stations M, Grommet (G) For M Station n Station [.1] pprox. 00. [.] ( port) (Station n) ( port) (itch) = (Station 1) 1.. Manual override x ø For.1 1 (.) C N.1 C (Builtin onetouch fitting) N. [.] (, port) Onetouch fitting ( port) pplicable tubing O.D.: ø, ø/" (Station n) (Station 1) (itch) = Station.. 1 SYJ VQZ V VG V

18 ubber Seal ort ilot Solenoid Valve Series SYJ00 Specifications Body ported Base mounted Fluid Operating pressure range (Ma) Internal pilot ir 0.1 to 0.7 mbient and fluid temperature ( C) Note 1) esponse time ms (at 0. Ma) Max. operating frequency (Hz) Manual override (Manual operation) ilot exhaust method to 0 (No freezing.) or less Nonlocking push type, pushturn locking slotted type, pushturn locking lever type Individual exhaust for the pilot valve, common exhaust for the pilot and main valve Lubrication Mounting orientation Shock/Vibration resistance (m/s Note ) ) Enclosure Not required Unrestricted /0 Dust proof ( DIN terminal, M connector conforms to I.) Based on IEC09 Note 1) Based on dynamic performance test, JIS B (Coil temperature: C, at rated voltage, without surge voltage suppressor.) Note ) Impact resistance: No malfunction occurred when it is tested in the axial direction and at the right angles to the main valve and armature in both energized and deenergized states every once for each condition. (Value in the initial state) Vibration resistance: No malfunction occurred in one sweep test between and 00 Hz. Test was performed at both energized and deenergized states in the axial direction and at the right angles to the main valve and armature. (Value in the initial state) Solenoid Specifications JIS Symbol Internal pilot SYJ1 SYJ () 1 () () External pilot SYJ1 SYJ () () 1 () () Order Made Made to Order () 1 () () 1 () () (For details, refer to pages 1 to 1.) Electrical entry Coil rated voltage (V) ower consumption (W) pparent power (V) DC C DC C 0 /0 Hz llowable voltage fluctuation Standard With power saving circuit 0 V 1 V [11 V] 0 V V [0 V] Surge voltage suppressor Indicator light Grommet (G), (H), L plug connector (L), M plug connector (M), DIN terminal (D), (Y), M connector (W) G, H, L, M, W D, Y, 1,,,, 1 0, 1, 0, ±% of rated voltage 0. (With light: 0. (DIN terminal with light: 0.)) 0.7 (With light: 0.1) 0. (With light: 0.9) [0.9 (With light: 0.97)] 1.1 (With light: 1.) 1.0 (With light: 1.) [1. (With light: 1.)] 0.1 (With light only) 0.7 (With light: 0.7) 0. (With light: 0.97) [0.9 (With light: 1.07)] 1.1 (With light: 1.0) 1.7 (With light: 1.) [1.9 (With light: 1.0)] Diode (DIN terminal, varistor when nonpolar types) LED (Neon light when C with DIN terminal) In common between 1 VC and 11 VC, and between VC and 0 VC. For 11 VC and 0 VC, the allowable voltage is 1% to % of rated voltage. S, Z and T type (with power saving circuit) should be used within the following allowable voltage fluctuation range due to a voltage drop caused by the internal circuit. S and Z type: VDC: 7% to % 1 VDC: % to % T type: VDC: % to % 1 VDC: % to % 1

19 ubber Seal ort ilot Solenoid Valve Series SYJ00 Flow Characteristics/Mass Valve model Body ported Base mounted (with subplate) SYJ1 SYJ SYJ1 SYJ Flow characteristics Type of ort 1 ( ) ( ) actuation size Grommet C [dm /(s bar)] b Cv C [dm /(s bar)] b Cv N.C N.O N.C N.O () Note) Value for DC. dd g for C. ( ): Without subplate. Mass (g) Note) L/M plug connector 7 1 (7) DIN terminal () M connector 1 (1) External ilot SYJ00 ilot valve pressure is supplied separately from the main valve pressure through the use of a separate supply port. It can be used in the vacuum (up to 0 ka) or low pressure line with 0.1 Ma or less. Specifications pplicable model Operating pressure range Ma Base mounted (SYJ1, SYJ) Main pressure External pilot pressure 0 ka to to 0.7, port port (External pilot) port Note 1) For manifold base, refer to page 19. Note ) External pilot type body ported valves (SYJ ) can only be used on the manifold. For body ported models with the external pilot option, please refer to page 1. SYJ VQZ V VG V 17

20 Series SYJ00 port (For manifold type, 1) ated voltage DC V S VDC 1 VDC VDC VDC VDC DC specifications of type D, Y, DO and YO is only available with 1 and VDC. C ( 0 /0 Hz) 1 0 VC 0 VC 1 VC [11 VC] VC [0 VC] For type W, DC voltage is only available. Note) Ctype models that are CE compliant have DIN terminals only. Type of actuation 1 Normally closed Normally open How to Order Light/surge voltage suppressor Electrical entry for G, H, L, M and W Without light/surge voltage suppressor S With surge voltage suppressor Z With light/surge voltage suppressor With surge voltage suppressor (Nonpolar type) U With light/surge voltage suppressor (Nonpolar type) For C voltage valves there is no S option. It is already builtin to the rectifier circuit. For type and U, DC voltage is only available. ower saving circuit is only available in the Z type. Bracket : Without bracket F : With bracket Note) Ctype models that are CE compliant have DIN terminals only. Electrical entry for D, Y S Z Without light/surge voltage suppressor With surge voltage suppressor (Nonpolar type) With light/surge voltage suppressor (Nonpolar type) DOZ and YOZ are not available. For C voltage valves there is no S option. It is already builtin to the rectifier circuit. Bracket is not mounted. External pilot type is compatible with the MadetoOrder specifications (). Made to Order Body ported external pilot (efer to page 1.) [Option] Body ported SYJ 1 M M Base mounted port For subplate style, manifold type 0, 0, 1, 1 Body option : Individual pilot exhaust type port, E port M: Common exhaust for the pilot and main valve SYJ 1 M 01 Coil specifications Standard With power saving circuit T (, 1 VDC only) ower saving circuit is not available in the case of D, Y, DO, YO or W type. Electrical entry Grommet G: Lead wire length 00 mm Manual override : Nonlocking push type D: ushturn locking slotted type, 1,,, VDC/0, 1, 0, VC ort size : Without subplate E: ushturn locking lever type L plug connector M plug connector L: With lead wire (Length 00 mm) M: With lead wire (Length 00 mm) MN: Without lead wire (With gasket and screws), 1 VDC/ 0, 1, 0, VC DIN terminal D: With connector 01: port With subplate Q Y: With connector Thread type c F G N NT T NTF CE complaint CE complaint Note) Ctype models that are CE compliant have DIN terminals only., 1,,, VDC M connector WO: Without connector cable port, E port H: Lead wire length 00 mm LN: Without lead wire LO: Without connector MO: Without connector DO: Without connector YO: Without connector W : With connector cable Note 1) : External pilot type 1 SYJ is only for manifold use. CE compliant DC C Note) When placing an order for body ported solenoid valve as a single unit, mounting screws for manifold and gasket are not attached. Order them separately, if necessary. (For details, refer to page 19.) LN, MN type: with sockets. efer to page 1 for the lead wire length of L and M plug connectors. efer to page 1 for the connector assembly with cover for L and M plug connectors. DIN terminal type "Y" which conforms to EN170C (former DIN0C) is also available. For details, refer to page 17. For connector cable of M connector, refer to page 19. M connector conforming to IEC097 is also available. efer to page 1 for details. Note 1) Enter the cable length symbols in. lease be sure to fill in the blank referring to page 19.

21 ubber Seal ort ilot Solenoid Valve Series SYJ00 Construction N.C. () ey q () t wr N.O. () ey q () t w r 1 () () 1 () () i i 1 () () 1 () () u u Component arts No. 1 Description Body iston plate End cover iston Spool valve assembly Spool spring Material luminum diecast esin luminum diecast esin Stainless steel Note White White White eplacement arts No. 7 Description Subplate Note) ilot valve Bracket assembly art no. SYJ0091(Q) V111(T) SYJ0001 Note) dd suffix Q for the CEcompliant product. Note luminum diecast How to Order ilot Valve ssembly V111 G V11 D Coil specifications Standard With power saving circuit T (, 1 VDC only) ower saving circuit is not available in the case of W type. ated voltage VDC 1 VDC V VDC S VDC VDC 1 0 VC 0/0 Hz 0 VC 0/0 Hz 1 VC 0/0 Hz [11 VC 0/0 Hz] VC 0/0 Hz [0 VC 0/0 Hz] For type W, DC voltage is only available. CEcompliant: For DC only. Electrical entry Grommet, 00 mm lead wire Grommet, 00 mm lead wire G H L LN LO M MN MO WO W Light/surge voltage suppressor Without light/surge voltage suppressor S With surge voltage suppressor Z With light/surge voltage suppressor With surge voltage suppressor (Nonpolar type) U With light/surge voltage suppressor (Nonpolar type) For C voltage valves there is no S option. It is already builtin to the rectifier circuit. For and U, DC voltage is only available. ower saving circuit is only available in the "Z" type. L plug connector M plug connector M connector With lead wire Without lead wire Without connector With lead wire Without lead wire Without connector Without connector cable With connector cable Note 1) For connector cable of M connector, refer to page 19. Note 1) Enter the cable length symbols in. lease be sure to fill in the blank referring to page 19. Light/surge voltage suppressor Without light/surge voltage suppressor S With surge voltage suppressor (Nonpolar type) Z With light/surge voltage suppressor (Nonpolar type) DOZ and YOZ are not available. For C voltage valves there is no S option. It is already builtin to the rectifier circuit. Electrical entry D DIN terminal With connector DO (Type D) Without connector Y DIN terminal With connector YO (Type Y) Without connector Do not replace V111 (G, H, L, M, W) to V11 (DIN terminal) and vice versa when replacing pilot valve assembly only. ated voltage VDC 1 VDC 1 0 VC 0/0 Hz 0 VC 0/0 Hz 1 VC 0/0 Hz [11 VC 0/0 Hz] VC 0/0 Hz [0 VC 0/0 Hz] DC specifications of type D and DO is only available with 1 and VDC. ower saving circuit is not available in the case of D or DO type. SYJ VQZ V VG V Since V111 and V11 are CEcompliant as standard, the suffix "Q is not necessary. 19

22 Series SYJ00 Body orted [ ] for C Grommet (G), (H): SYJ G H M With bracket: SYJ G H MF ( port).. [7.]. 1. G: pprox. 00 H: pprox. 00 x ø [.1] 7 L plug connector (L): SYJ L M (F) M plug connector (M): SYJ M M (F) DIN terminal (D,Y): M SYJ D Y M (F) connector (WO): SYJ WO M (F) 1.7 pplicable cable O.D. ø. to ø g Manual override. x ø. (For manifold mounting) x ø [.1]. [7.] (, port) (Bracket) ø1. (E port) pprox [.1] Max. M x 1 pprox [.]. [7.7].7 [7.9] efer to page 19 for dimensions with connector cable. 190

23 ubber Seal ort ilot Solenoid Valve Series SYJ00 Base Mounted (With Subplate) [ ] for C Grommet (G), (H): SYJ G H 01 ( port) 1. Manual override x ø. G: pprox. 00 H: pprox [7.] [.]. ( port) (, port) L plug connector (L): SYJ L 01 M plug connector (M): SYJ M 01 DIN terminal (D, Y): SYJ D Y 01 M connector (WO): SYJ WO [.]. pprox. 00. [7.7] [7.7] pprox. 00 (Lead wire length) [7.9] pplicable cable O.D. ø. to ø7 Max. 7. g M x 1. SYJ VQZ V VG V efer to page 19 for dimensions with connector cable. 191

24 Series SYJ00 Manifold Specifications Manifold Specifications For internal pilot Model For external pilot Manifold type (SU), (EH) Valve stations port Location orting specifications Direction, port ort size port Type Type 1 Valve Top 1 / Type 0 Type 0 Single base/b mount Common SU, common EH to stations Base Bottom 1 / 1 / Type 1 Type 1 Side 1 /, 1 /, C (Onetouch fitting for ø),,c (Onetouch fitting for ø) port Note) Note) Only for external pilot Flow Characteristics Body ported for internal pilot Base mounted for internal pilot Body ported for external pilot Base mounted for external pilot Manifold Type SSYJ Type SSYJ0M Type SSYJ001 Type SSYJ1M Type SSYJ1 Type SSYJ1C Type SSYJ1C Type SSYJ1 Type SSYJ0M Type SSYJ001 Type SSYJ1M Type SSYJ1 Type SSYJ1C Type SSYJ1C SYJ SYJ SYJ SYJ 1(), () port ort size Note) Value at manifold base mounted, position single operating () port C [dm /(s bar)] C C C C ( ) b Flow characteristics Cv C [dm /(s bar)] ( ) b Cv How to Order Manifold (Example) Instruct by specifying the valves and blanking plate assembly to be mounted on the manifold along with the manifold base model no. (Example) SSYJ set (manifold base) SSYJC... 1 set (manifold base) SYJ1LZM... sets (valve) SYJ1G... sets (valve) SYJ set (blanking plate assembly) SYJ set (blanking plate assembly) The asterisk denotes the symbol for assembly. refix it to the part nos. of the solenoid valve, etc. 19

25 ubber Seal ort ilot Solenoid Valve Series SYJ00 Combinations of Solenoid Valve, Manifold Gasket and Manifold Base Blanking late ssembly Body ported (Type SYJ ()(Q)) Base mounted (Type SYJ ()(Q)) art no.: SYJ00(Q) ound head combination screw M. x, Matt nickel plated ound head combination screw M. x, Matt nickel plated ound head combination screw Blanking plate Manifold gasket Manifold gasket SYJ00 Manifold gasket SYJ00 pplicable base Subplate Type SSYJ0(Q) Type SSYJ1(Q) Type SSYJ0(Q) Type SSYJ1(Q) art no.: SYJ001(Q) Manifold base pplicable base Type SSYJ1(Q) Type SSYJ(Q) Manifold base pplicable base Subplate Type SSYJ0(Q) Type SSYJ1(Q) Type SSYJ0(Q) Type SSYJ1(Q) Manifold base ound head combination screw Blanking plate Manifold gasket pplicable base Type SSYJ(Q) Type SSYJ1(Q) Caution Mounting screw tightening torques M.: 0. N m Use caution to the assembly orientation for solenoid valves (blanking plate) and manifold gasket. Note) dd suffix Q for the CEcompliant product. SYJ VQZ V VG V 19

26 Series SYJ00 Manifold for Internal ilot Type Type Type 0 Type 1 Type 1 Type 0 port port port port port port, port port port,, C, C Stations 0 : Stations 0 : 0 : Manifold for External ilot Type How to Order SSYJ 0 Stations : Stations SSYJ 0 0 M Stations : Stations SSYJ 1 0 C Stations Stations : Stations port size M 01 C ø onetouch fitting C ø onetouch fitting N ø/" onetouch fitting N7 ø1/" onetouch fitting SSYJ 1 0 Stations 0 : port size M 01, port thread type 00F 00N 00T Stations : Stations SSYJ Stations 0 : c G NT NTF Stations : Stations F Bracket Without bracket With bracket, port thread type 00F 00N 00T, port thread type F N T c G NT NTF, port thread type c G NT NTF port size M 01 F N T c G NT NTF, port thread type F N T c G NT NTF pplicable solenoid valve SYJ1 M(Q) SYJ1M M(Q) SYJ M(Q) SYJM M(Q) pplicable blanking plate assembly efer to page 19. Note) For more than stations, supply air to both sides of port and exhaust air from both sides of port. How to Order pplicable solenoid valve SYJ1 (Q) SYJ1M (Q) SYJ (Q) SYJM (Q) pplicable blanking plate assembly efer to page 19. Note) For more than 9 stations, supply air to both sides of port and exhaust air from both sides of port. How to Order pplicable solenoid valve SYJ1 (Q) SYJ1M (Q) SYJ (Q) SYJM (Q) pplicable blanking plate assembly efer to page 19. Note) For more than 9 stations, supply air to both sides of port and exhaust air from both sides of port. ilot valve pressure is supplied separately from the main valve pressure through the use of a separate supply port. It can be used in the vacuum (up to 0 ka) or low pressure line with 0.1 Ma or less. port port port port, port (External pilot) port port How to Order pplicable solenoid valve SYJ1 M(Q) SYJ M(Q) pplicable blanking plate assembly efer to page 19. Note) For more than 9 stations, supply/exhaust air to/from both sides of and port. How to Order port (External pilot) port port Q Note) Ctype models that are CE compliant have DIN terminals only. CE complaint Q CE complaint CE complaint Q CE complaint CE complaint Q CE complaint CE complaint CE complaint [Option] pplicable solenoid valve SYJ1 (Q) SYJ (Q) pplicable blanking plate assembly efer to page 19. CE complaint Q CE complaint Type 1 port,, C, C port (External pilot) port port SSYJ 1 0 M 0 : Note) For more than 9 stations, supply/exhaust air to/from both sides of and port. How to Order Stations Stations : Stations port size M 01 C ø onetouch fitting C ø onetouch fitting N ø/" onetouch fitting N7 ø1/" onetouch fitting, port thread type F N T c G NT NTF Q pplicable solenoid valve SYJ1 (Q) SYJ (Q) pplicable blanking plate assembly efer to page 19. CE complaint CE complaint Note) For more than 9 stations, supply/exhaust air to/from both sides of and port. 19

27 ubber Seal ort ilot Solenoid Valve Series SYJ00 Type Manifold: Top orted/ssyj Stations 00 (F) [ ] for C Grommet (G) () () (1.) L x ø (.) 1. [0.] pprox. 00 (Lead wire length) Manual override.1 [.] (DIN.) x ø. ( port) (itch) =1 (, port). (Station 1) (Station n) 1. L M x 0. (Bracket mounting screw) L plug connector (L) M plug connector (M) DIN terminal (D, Y) M connector (WO) pprox. 00. [0.]. pprox [1.7] pplicable cable O.D. ø. to ø7 Max. g M x SYJ VQZ [.]. [.] V VG V efer to page 19 for dimensions with connector cable. Station n L L Station Station

28 Series SYJ00 Type 0 Manifold: Top orted/ssyj0 Stations M, 01 [ ] for C Grommet (G) For M 7.1 [9.] (DIN.) (itch) = x ø. (, port) For Manual override 7.1 [9.] (DIN.) (itch) =17 x ø. pprox. 00 (Lead wire length) (Station n) (Station 1) Manual override. pprox. 00 (Lead wire length) (Station n) (Station 1)..1 [1.1] ( port) (itch) = ( port) (itch) =1 1 L plug connector (L) M plug connector (M) DIN terminal (D, Y) M connector (WO) [9.] 7. [9.]. 7.1 g pprox [1.1] pprox. 00. [7.] Max pplicable cable O.D. ø. to ø7 M x efer to page 19 for dimensions with connector cable. ort size M 19 Station n Station Station

29 ubber Seal ort ilot Solenoid Valve Series SYJ00 Type 1 Manifold: Side orted/ssyj1 Stations C, N C, N7 [ ] for C Grommet (G) 7.1 [9.] (DIN.) (itch) = x ø. Manual override (, port) (.9) pprox. 00 (Lead wire length). (Station n) (Station 1).1 [1.1].7. Onetouch fitting ( port) pplicable tubing O.D.: ø, ø/" (itch) = L plug connector (L) M plug connector (M) DIN terminal (D, Y) M connector (WO) [9.] 7. [9.] pprox [1.1] pprox. 00. [7.] g7 Max pplicable cable O.D. ø. to ø7 M x SYJ VQZ V VG V efer to page 19 for dimensions with connector cable. ort size Onetouch fitting Station n Station Station 9 197

30 Series SYJ00 Type 1 Manifold: Side orted/ssyj1 Stations M, 01 [ ] for C Grommet (G) For M (itch) =1 1 For (itch) = [9.] (DIN.) 1. x ø. 7.1 [9.] (DIN.) 1. x ø. Manual override Manual override pprox. 00 (Lead wire length). pprox. 00 (Lead wire length). (Station n) (Station 1) (Station n) (Station 1).1 [1.1].7..1 [1.1].7. ( port) (itch) =1 1.. ( port) (itch) = ort size M Station n Station Station

31 ubber Seal ort ilot Solenoid Valve Series SYJ00 Type 1 Manifold: Top orted (External ilot Type)/SSYJ1 Stations 00 [ ] for C Grommet (G) ( port).. L [9.] (DIN.) pprox. 00 (Lead wire length) 17 (itch) =1 1. x ø. ( port) Manual override.. (, port) (Station n) (Station 1).1 [1.1].7. L plug connector (L) M plug connector (M) DIN terminal (D, Y) M connector (WO) [9.] pprox [1.1] 7. [9.]. pprox. 00. [7.] 7.1 g7 Max pplicable cable O.D. ø. to ø M x SYJ VQZ V VG V efer to page 19 for dimensions with connector cable. Station n L Station Station

32 Series SYJ00 Type 0 Manifold: Bottom orted (External ilot Type)/SSYJ0 Stations M, 01 [ ] for C Grommet (G) For M 7.1 [9.] ( port) (DIN.) pprox. 00 (Lead wire length). L 7. (itch) = x ø. (For mounting) Manual override (Station n) (Station 1) (, port) For 7.1 [9.] ( port) (DIN.) pprox. 00 (Lead wire length). L 7. (itch) = x ø. (For mounting) Manual override (Station n) (Station 1).1 [1.1] ( port) (itch) = ( port) (itch) =1 1 L plug connector (L) M plug connector (M) DIN terminal (D, Y) M connector (WO) [9.] 7. [9.]. 7.1 g pprox [1.1] pprox. 00. [7.] Max pplicable cable O.D. ø. to ø7 M x efer to page 19 for dimensions with connector cable. ort size M 0 Station n L L Station Station

33 ubber Seal ort ilot Solenoid Valve Series SYJ00 Type 1 Manifold: Side orted (External ilot Type)/SSYJ1 Stations C, N C, N7 [ ] for C Grommet (G) 7.1 [9.] ( port) (DIN.). L x ø pprox. 00 (Lead wire length) (itch) =1 1 Manual override. (, port) (.9) (Station n) (Station 1).1 [1.1].7. Onetouch fitting ( port) pplicable tubing O.D.: ø, ø/" ø, ø1/" (itch) = L plug connector (L) M plug connector (M) DIN terminal (D, Y) M connector (WO) [9.] pprox [1.1] 7. [9.]. pprox. 00. [7.] 7.1 g7 Max pplicable cable O.D. ø. to ø M x efer to page 19 for dimensions with connector cable. SYJ VQZ V VG V ort size Onetouch fitting Station n L Station Station 7 1 1

34 Series SYJ00 Type 1 Manifold: Side orted (External ilot Type)/SSYJ1 Stations M, 01 [ ] for C For M For ( port) L 7. ( port) L [9.] (DIN.).. 1. x ø. 7.1 [9.] (DIN.).. 1. x ø. pprox. 00 (Lead wire length) (Station n) (itch) =1 (Station 1) Manual override. pprox. 00 (Lead wire length) (Station n) (itch) =17 (Station 1) Manual override..1 [1.1].7..1 [1.1].7. ( port) (itch) = ( port) (itch) = ort size M Station n L L Station Station

35 SYJ VQZ V VG V

36 ubber Seal ort ilot Solenoid Valve Series SYJ700 Specifications JIS Symbol Internal pilot SYJ71 SYJ7 () 1 ()() External pilot SYJ71 SYJ7 () 1 ()() Body ported Base mounted () 1 () () () 1 () () Made to Order (For details, refer to pages 1 to 1.) Fluid Operating pressure range (Ma) Internal pilot ir 0.1 to 0.7 mbient and fluid temperature ( C) Note 1) esponse time ms (at 0. Ma) Max. operating frequency (Hz) Manual override (Manual operation) ilot exhaust method to 0 (No freezing.) 0 or less Nonlocking push type, pushturn locking slotted type, pushturn locking lever type Individual exhaust for the pilot valve, common exhaust for the pilot and main valve Lubrication Mounting orientation Shock/Vibration resistance (m/s Note ) ) Enclosure Not required Unrestricted /0 Dust proof ( DIN terminal, M connector: I) Based on IEC09 Note 1) Based on dynamic performance test, JIS B (Coil temperature: C, at rated voltage, without surge voltage suppressor.) Note ) Impact resistance: No malfunction occurred when it is tested in the axial direction and at the right angles to the main valve and armature in both energized and deenergized states every once for each condition. (Value in the initial state) Vibration resistance: No malfunction occurred in one sweep test between and 00 Hz. Test was performed at both energized and deenergized states in the axial direction and at the right angles to the main valve and armature. (Value in the initial state) Solenoid Specifications Electrical entry Coil rated voltage (V) ower consumption (W) pparent power (V) DC C DC C 0 /0 Hz llowable voltage fluctuation Standard With power saving circuit 0 V 1 V [11 V] 0 V V [0 V] Surge voltage suppressor Indicator light Grommet (G), (H), L plug connector (L), M plug connector (M), DIN terminal (D), (Y), M connector (W) G, H, L, M, W D, Y, 1,,,, 1 0, 1, 0, ±% of rated voltage 0. (With light: 0. (DIN terminal with light: 0.)) 0.7 (With light: 0.1) 0. (With light: 0.9) [0.9 (With light: 0.97)] 1.1 (With light: 1.) 1.0 (With light: 1.) [1. (With light: 1.)] 0.1 (With light only) 0.7 (With light: 0.7) 0. (With light: 0.97) [0.9 (With light: 1.07)] 1.1 (With light: 1.0) 1.7 (With light: 1.) [1.9 (With light: 1.0)] Diode (DIN terminal, varistor when nonpolar types) LED (Neon light when C with DIN terminal) In common between 1 VC and 11 VC, and between VC and 0 VC. For 11 VC and 0 VC, the allowable voltage is 1% to % of rated voltage. S, Z and T type (with power saving circuit) should be used within the following allowable voltage fluctuation range due to a voltage drop caused by the internal circuit. S and Z type: VDC: 7% to % 1 VDC: % to % T type: VDC: % to % 1 VDC: % to %

37 ubber Seal ort ilot Solenoid Valve Series SYJ700 Flow Characteristics/Mass Valve model Body ported Base mounted (with subplate) SYJ71 SYJ7 SYJ71 SYJ7 SYJ71 SYJ7 Flow characteristics Type of ort 1 ( ) ( ) actuation size Grommet C [dm /(s bar)] b Cv C [dm /(s bar)] b Cv N.C N.O. N.C. N.O. N.C. N.O. 1/ Note) Value for DC. dd g for C. ( ): Without subplate (7) Mass (g) Note) L/M plug connector 7 1 (7) DIN terminal 97 M connector 0 17 (97) (0) External ilot SYJ700 ilot valve pressure is supplied separately from the main valve pressure through the use of a separate supply port. It can be used in the vacuum (up to 0 ka) or low pressure line with 0.1 Ma or less. Specifications pplicable model Operating pressure range Ma Base mounted (SYJ71, SYJ7) Main pressure External pilot pressure 0 ka to to 0.7, port, 1/ port (External pilot) port, 1/ Note 1) For manifold base, refer to page 1. Note ) External pilot type body ported valves (SYJ7 ) can only be used on the manifold. For body ported models with the external pilot option, please refer to page 1. SYJ VQZ V VG V

38 Series SYJ700 Type of actuation 1 port Normally closed Normally open (For manifold type, 1) ated voltage DC V S VDC 1 VDC VDC VDC VDC DC specifications of type D, Y, DO and YO is only available with 1 and VDC. C ( 0 /0 Hz) 1 0 VC 0 VC 1 VC [11 VC] VC [0 VC] For type W, DC voltage is only available. Note) Ctype models that are CE compliant have DIN terminals only. How to Order Light/surge voltage suppressor Electrical entry for G, H, L, M and W Without light/surge voltage suppressor S With surge voltage suppressor Z With light/surge voltage suppressor With surge voltage suppressor (Nonpolar type) U With light/surge voltage suppressor (Nonpolar type) For C voltage valves there is no S option. It is already builtin to the rectifier circuit. For type and U, DC voltage is only available. ower saving circuit is only available in the "Z" type. Thread type c F G N NT T NTF Bracket : Without bracket F : With bracket Note) Ctype models that are CE compliant have DIN terminals only. Electrical entry for D, Y S Z Without light/surge voltage suppressor With surge voltage suppressor (Nonpolar type) With light/surge voltage suppressor (Nonpolar type) DOZ and YOZ are not available. For C voltage valves there is no S option. It is already builtin to the rectifier circuit. Bracket is not mounted. External pilot type is compatible with the MadetoOrder specifications (). Made to Order [Option] Body ported external pilot (efer to page 1.) Body ported Base mounted port For subplate style, mainfold type 0, 1, 1,, SYJ7 1 M 01 SYJ7 1 M 01 Coil specifications Standard With power saving circuit T (, 1 VDC only) ower saving circuit is not available in the case of D, Y, DO, YO or W type. D: ushturn locking slotted type Manual override : Nonlocking push type E: ushturn locking lever type ort size : Without subplate Thread type F N T c G NT NTF 01: port With subplate CE complaint Q CE complaint Note) Ctype models that are CE compliant have DIN terminals only. 0: 1/ port With subplate (With gasket and screws) Body option : Individual pilot exhaust type Electrical entry Grommet, 1,,, VDC/0, 1, 0, VC L plug connector G: Lead wire L: With lead wire length 00 mm (Length 00 mm) M plug connector M: With lead wire MN: Without lead D: With connector (Length 00 mm) wire, 1 VDC/ 0, 1, 0, VC DIN terminal Y: With connector, 1,,, VDC M connector WO: Without connector cable port, E port M: Common exhaust for the pilot and main valve H: Lead wire LN: Without length 00 mm lead wire LO: Without connector MO: Without connector DO: Without connector YO: Without connector W : With connector cable Note 1) port, E port : External pilot type SYJ7 is only for manifold use. CE DC compliant C Note) When placing an order for body ported solenoid valve as a single unit, mounting screws for manifold and gasket are not attached. Order them separately, if necessary. (For details, refer to page 111.) LN, MN type: with sockets. efer to page 1 for the lead wire length of L and M plug connectors. efer to page 1 for the connector assembly with cover for L and M plug connectors. DIN terminal type "Y" which conforms to EN170C (former DINC) is also available. For details, refer to page 17. For connector cable of M connector, refer to page 19. M connector conforming to IEC097 is also available. efer to page 1 for details. Note 1) Enter the cable length symbols in. lease be sure to fill in the blank referring to page 19.

39 ubber Seal ort ilot Solenoid Valve Series SYJ700 Construction N.C. () ey q t () r w N.O. () ey q t () r w 1 () () i 1 () () i 1 () () 1 () () u u Component arts No. 1 Description Body iston plate End cover iston Spool valve assembly Spool spring Material luminum diecasted esin luminum diecasted esin Stainless steel Note White White White eplacement arts No. Description art no. 7 Subplate Note) SYJ70091(Q) SYJ7009(Q) 1/ ilot valve V111(T) Bracket assembly SYJ Note) dd suffix Q for the CEcompliant product. Note luminum diecasted How to Order ilot Valve ssembly V111 G V11 D Coil specifications Standard With power saving circuit T (, 1 VDC only) ower saving circuit is not available in the case of W type. V S 1 ated voltage VDC 1 VDC VDC VDC VDC 0 VC 0/0 Hz 0 VC 0/0 Hz 1 VC 0/0 Hz [11 VC 0/0 Hz] VC 0/0 Hz [0 VC 0/0 Hz] For type W, DC voltage is only available. CEcompliant: For DC only. G H L LN LO M MN MO WO W Light/surge voltage suppressor S Z U Without light/surge voltage suppressor With surge voltage suppressor With light/surge voltage suppressor With surge voltage suppressor (Nonpolar type) With light/surge voltage suppressor (Nonpolar type) For C voltage valves there is no S option. It is already builtin to the rectifier circuit. For and U, DC voltage is only available. ower saving circuit is only available in the "Z" type. Electrical entry Grommet, 00 mm lead wire Grommet, 00 mm lead wire L plug connector M plug connector M connector With lead wire Without lead wire Without connector With lead wire Without lead wire Without connector Without connector cable With connector cable Note 1) For connector cable of M connector, refer to page 19. Note 1) Enter the cable length symbols in. lease be sure to fill in the blank referring to page 19. ated voltage VDC 1 VDC 1 0 VC 0/0 Hz 0 VC 0/0 Hz 1 VC 0/0 Hz [11 VC 0/0 Hz] VC 0/0 Hz [0 VC 0/0 Hz] DC specifications of type D and DO is only available with 1 and VDC. ower saving circuit is not available in the case of D, Y, DO and YO type. Light/surge voltage suppressor Without light/surge voltage suppressor With surge voltage suppressor S (Nonpolar type) With light/surge voltage suppressor Z (Nonpolar type) DOZ and YOZ are not available. For C voltage valves there is no S option. It is already builtin to the rectifier circuit. Electrical entry D DIN terminal With connector DO (Type D) Without connector Y DIN terminal With connector YO (Type Y) Without connector Do not replace V111 (G, H, L, M, W) to V11 (DIN terminal) and vice versa when replacing pilot valve assembly only. SYJ VQZ V VG V Note) Since V111 and V11 are CEcompliant as standard, the suffix "Q is not necessary. 7