1300 Industrial Road, Unit #19 San Carlos, CA 94070 FREE CALL 1-866-695-5862 US & Canada info@lumascape.com IP68 IK10 The is a premium ingrade luminaire with outstanding performance. The housing is totally sealed, as proven by independent lab tests rating the housing for submersion up to 33' (10 m). The glass surface is safe to touch when fitted with HumanTouch. Re-lamping and re-sealing on site is simple and robust. The choice of lamps and accessories makes the suitable for most uplighting applications. Specifications Lamp Source 39 W, 70 W MH T6 (G12) 39 W, 70 W MH R111 (GX8.5) 39 W, 70 W MH PAR 30 (E26 medium) 18 W CFL (GX24-q2) 26 W, 32 W CFL (GX24-q3) 42 W CFL (GX24-q4) 75 W max HAL R111 (G53) 75 W max PAR 20-38 (E26 medium) Approved Use Suitable for wet locations Suitable for use in poured concrete IP Rating IP68 Construction 316 marine grade stainless Installation Types Concrete pour, drive-over & general use applications Direct Burial Landscapes, planters & special applications (consult factory) Drive-over Static Load Rating Impact Rating Standard Inclusions Ambient Operating Temperature Accessories Order separately Photometrics Glass Temperature 149 F ( 65 C) With OptiClear lens and pre-installation blockout (LS640-K or LS640-K-SP) 8 140 lb (3 700 kg) with OptiClear lens and pre-installation blockout (Load applied to center of glass across a 2" diameter area) IK10 with OptiClear lens Teflon coated cover screws MicroAntiLeach wire entry HID -20 F to 122 F (-30 C to 40 C) CFL 0 F to 122 F (-18 C to 40 C) LS640-K/LS640-K-SP Pre-installation blockout Refer to www.lumascape.com HumanTouch compliant models 39 W, 70 W MH T6 18-42 W CFL Metal Halide with PureOptics reflector and round flush cover Metal Halide with PureOptics reflector and square flush cover Any luminaire can become hot - take care with appropriate use and placement
Why Use LS640-K? The LS640-K acts as a blockout, and is intended for installation before the luminaire, however it has other special functions. To simplify the installation, every LS640-K is supplied complete with a 4-way, ¾" PVC junction box, inside which the installer can make all necessary connections, and allows the completion of all wiring even before the luminaire arrives on site. This method also ensures the luminaire itself is not damaged during concreting or other site works. Note: The junction box remains serviceable after installation. To complete the installation, Lumascape provides an IP68 connector, enabling a tool-free final connection from the luminaire to the branch circuit. In addition, this connector is readily detachable, allowing for off-site maintenance. Why Use LS640-K-SP? The LS640-K-SP pre-installation kit (order separately) is ideal for use in applications where maximum flexibility for the type and location of branch circuit connections are required or where exact site conditions may be unknown. The LS640-K-SP is also for use with applications requiring dimmable fluorescent lighting scheme. For use with the LS640-K-SP, Lumascape provides the complete with 6.5' of factory-installed hookup wire and a ½ NPT adapter or an S00W cord (both options include a MicroAntiLeach seal). This provides the installer with greater flexibility to determine the type and location of the branch circuit connection. This option is also 100% hard-wired, and does not feature the IP68 detachable couplings for off-site maintenance. All aspects of the luminaire itself are still field serviceable. Connection Type '85' for LS640-K Ø10.33 (262 mm) Lens Options OptiClear Glass Glass of very high optical purity and load strength. Suitable for walk-over and drive-over applications. 19.45 (494 mm) OptiClear glass with slip reduction glazing process. Suitable for walk-over and drive-over applications. IP68 Connector & Junction Box The luminaire is fitted with an IP68 connector, which attaches directly to the cord supplied with LS640-K, without the use of any tools. The cord is 1.8' (0.56 m) in length, and is factory assembled with a 4-way, ¾" junction box Remains field serviceable after installation. Borosilicate Glass Ideal for limited access locations. Not recommended for high traffic pedestrian areas. Connection Type '84' for LS640-K-SP Connection Type '82' for LS640-K-SP Options for Flush covers for pre-installation use special seals and support bushes to ensure static loads up to 8 140 lb (3 700 kg) are properly supported. In order to achieve this driveover rating, OptiClear or must be used. 6.5' SOOW Cord For connection to the branch circuit via junction box (by others) or other approved method. c/w 6.5' SOOW Cord (16/3) ½" NPT Adapter The luminaire is factory-fitted with 6.5' hookup wire. Ensure terminations can be made within this length. For other length options, consult factory. Round Flush SS316: Polished SS316:
Lamp Lens Connection Type Optical System Housing Depth Wire Entry Location Input Voltage 21 Q LAMP Wattage Base OPTICAL SYSTEM Reflector Beam MH T6 39 W G12 223 39 W G12 226 70 W G12 221 70 W G12 225 MH PAR 30 39 W E26 med. 223 39 W E26 med. 226 70 W E26 med. 221 70 W E26 med. 225 PAR 20-38 75 W max E26 med. 120 V only 252 CFL 18 W GX24-q2 266 Adjustable PureOptics Narrow 10 AV 1 Medium 18 AW 1 Flood 48 AX 1 Wide flood 60 AY 1 Adjustable Aluminum Narrow 10 XV 2 Fixed Asymmetric aluminum wallwash Medium 28 XW 2 Flood 70 XX 2 Wide flood 140 XY 2 Very narrow XQ 4 Wide XT 4 Ultra wide XP 4 26 W, 32 W GX24-q3 262 42 W GX24-q4 265 Adjustable PAR 20 / 30 AR 3 Fixed PAR 38 AS 3 MH R111 39 W GX8.5 226 70 W GX8.5 225 HAL R111 75 W max G53 291 Electronic Ballast Adjustable Aluminum Flood 140 XL 2 Fixed Aluminum Asymmetric flood XN 4 Adjustable AJ 3 LENS OptiClear Borosilicate Glass Suitable for drive-over Not suitable for drive-over Very high optical purity and load strength OptiClear with slip reduction glazing process Ideal for limited access locations A G X HOUSING DEPTH 19.45" (494 mm) 21 WIRE ENTRY LOCATION Bottom Q COVER Material Finish Round Flush CONNECTION TYPE Polished M N INPUT VOLTAGE 120 V, 60 Hz 04 0-10 V dimmable ballast, 120-277 V, 50/60 Hz 09-DIM 277 V, 60 Hz, or 120-277 V, 50/60 Hz (Electronic Ballasts only) 09 CFL only. Not suitable for filament lamp options. NOTE: Other voltage options available - consult factory IP68 Connector & Juction Box 85 (3) 6.5' SOOW Cord 84 ½" NPT Adapter 82 LS640-K required - order separately LS640K-SP required - order separately (3) Not suitable for use with dimmable ballasts 1 2 3 4 These numbers refer to the compatible accessories tables.
Direct Burial Why Use Direct Burial? Direct burial installation is ideal for landscaping areas or for special applications where depth is restricted. This type of installation also allows for maximum heat dissipation. The 316 grade Steel construction of the luminaire performs flawlessly in alkaline and acidic soil types, and is also rated for use in concrete pour applications. Note: This installation type has no option for a pre-installation blockout. Lumascape provides the complete with 6.5' of factory installed hookup wire and ½" NPT adapter, supplied complete with MicroAntiLeach seal. This provides the installer with greater flexibility to determine the nature of the branch circuit connection. This connection is also 100% hardwired. All aspects of the luminaire itself remains field servicable. Consult factory for application advice prior to using this configuration. Connection type '82' for 'Direct Burial' housing ½" NPT Adapter The luminaire is factory-fitted with 6.5' hookup wire. Ensure terminations can be made within this length. For other length options, consult factory. Lens Options OptiClear Glass Glass of very high optical purity and load strength. Suitable for walk-over and drive-over applications. OptiClear glass with slip reduction glazing process. Suitable for walk-over and drive-over applications. Borosilicate Glass Ideal for limited access locations. Not recommended for high traffic pedestrian areas. Options for Direct Burial Use recessed cover for installation in soil, grass, pavers and other uneven surfaces where no cover overhang is desired. Use flush covers for installation in fine finished surfaces such as granite and marble. They can also be used in some suspended applications. The flush cover will conceal gaps between the luminaire and the surrounding surface. Recessed SS316: Polished SS316: Round Flush SS316: Polished SS316: Square Flush SS316: Ø10.08 (256 mm) OD 10.08 (256 mm) Ø9.43 (239 mm) Housing OD Ø9.43 (239 mm) Housing OD 0.12 (3 mm) Ø9.43 (239 mm) Housing OD 0.12 (3 mm) 0.98 (25 mm) 13.95 (354 mm) 0.98 (25 mm) 13.95 (354 mm) 0.98 (25 mm) 13.95 (354 mm)
Direct Burial Lamp Lens Connection Type Optical System Housing Depth Wire Entry Location Input Voltage 82 25 LAMP Wattage Base MH T6 39 W G12 223 39 W G12 226 70 W G12 221 70 W G12 225 MH PAR 30 39 W E26 med. 223 39 W E26 med. 226 70 W E26 med. 221 70 W E26 med. 225 PAR 20-38 75 W max E26 med. 120 V only 252 CFL 18 W GX24-q2 266 26 W, 32 W GX24-q3 262 42 W GX24-q4 265 MH R111 39 W GX8.5 226 70 W GX8.5 225 HAL R111 75 W max G53 291 Electronic Ballast OPTICAL SYSTEM Reflector Beam Adjustable PureOptics Narrow 10 AV 1 Medium 18 AW 1 Flood 48 AX 1 Wide flood 60 AY 1 Adjustable Aluminum Narrow 10 XV 2 Fixed Asymmetric aluminum wallwash Medium 28 XW 2 Flood 70 XX 2 Wide flood 140 XY 2 Very narrow XQ 4 Wide XT 4 Ultra wide XP 4 Adjustable PAR 20 / 30 AR 3 Fixed PAR 38 AS 3 Adjustable Aluminum Flood 140 XL 2 Fixed Aluminum Asymmetric Flood XN 4 Adjustable AJ 3 LENS OptiClear Borosilicate Glass Very high optical purity and load strength OptiClear with slip reduction glazing process Ideal for limited access locations COVER Material Finish Recessed Round Flush Square Flush A G X Polished Polished CONNECTION TYPE ½" NPT Adapter 82 B H D I V HOUSING DEPTH 13.95" (354 mm) 25 WIRE ENTRY LOCATION Side Bottom INPUT VOLTAGE N Q 120 V, 60 Hz 04 0-10 V dimmable ballast, 120-277 V, 50/60 Hz 09-DIM 277 V, 60 Hz, or 120-277 V, 50/60 Hz (Electronic Ballasts only) 09 CFL only. Not suitable for filament lamp options. NOTE: Other voltage options available - consult factory 1 2 3 4 These numbers refer to the compatible accessories tables.
TM TM Accessories 1 T6 Metal Halide Adjustable PureOptics Reflector AV / AW / AX / AY 2 T6 Metal Halide and Compact Fluorescent Adjustable XL / XV / XW / XX / XY LS6013 Slatted louver LS688 Wall wash lens LS6012 LS6012 LS6013 Slatted louver LS686 - R / G / B / Y Dichroic color filter LS685 LS6011 LS6014 Cylindrical louver AND / AND / LS689 R / G / B / Y Dichroic color filters LS690 Prismatic lens LS6029 LS649-2 LS692 AV / AW / AX /AY PureOptics Reflector XL XV / XW / XX / XY AV / AW / AX /AY Adjustable PureOptics Reflector XL Adjustable XV / XW / XX / XY Adjustable
TM TM Accessories 3 R111 and PAR30, Halogen and Metal Halide Adjustable R111 & PAR AJ / AR 4 T6 Metal Halide and Compact Fluorescent Fixed XQ / XT / XP / XN LS6013 Slatted louver LS688 Wall wash lens LS6012 LS688 Wall wash lens included as standard LS691 Prismatic lens LS6017 accessory ring required - order separately LS686 - R / G / B / Y Dichroic color filter LS6017 accessory ring required - order separately LS691 Prismatic lens LS686 - R / G / B / Y Dichroic color filter LS685 AND / LS693 HumanTouch Use only with AR optical system LS685 AJ R111 Lamp AR PAR Lamp XQ / XT / XP XN standard 10 o 10 o AJ Adjustable R111 Lamp AR Adjustable PAR Lamp XQ / XT / XP Fixed XN Fixed