Retrofit HID High Bay Fixtures to Long Life High Efficiency LED

Transcription

1 Retrofit HID High Bay Fixtures to Long Life High Efficiency LED 2013 DyoCore Call us today for sales and pricing information: Toll Free: It is no hidden secret that LED bulbs use dramatically less wattage than conventional light bulbs. This is more apparent in the commercial market due to the extensively wasteful and high wattage bulbs currently being used. Most businesses simply limit the usage of lighting or even turn them off to conserve energy costs. With good intentions of saving energy this solution sacrifices safety and often work performance due to poor lighting. Lighting is a significant necessity when it comes to the work environment and LEDs allow you to maximize safety, work performance, reduce wasted energy, and save thousands of dollars. Where Fluorescent and HID High Bay Lighting Fails Until recently there have been few choices available when it came to commercial lighting. The most common choice has been Fluorescent bulbs that are highly wasteful energy wise and low on performance. These bulbs flickered, required warm up to turn on, produced significant heat, and often burned out within 2 to 3 years. Recent federal code changes even make some of these bulbs illegal to use. HID bulbs became a common replacement in warehouse spaces due to lower cost and reduction of fixtures but still wasted a tremendous amount of energy and produced even more heat. These HID bulbs last less time than their counter part fluorescents making them a maintenance nightmare. There is no place in today s market for these types of bulbs. Until today s LEDs were developed, retrofitting an entire business appeared to be a daunting and expensive task with little real energy savings. LED Retrofits Outperform DyoCore specializes in LED upgrade retrofit solutions that immediately provide tangible and valuable results! High quality, high efficiency LEDs are now readily available in virtually any style making an upgrade as simple as replacing a light bulb. Low wattage LEDs have up to a 10x longer life span than most conventional bulbs, produce 98% less heat, provide a significantly better quality of light, and save the average business tens to hundreds of thousands of dollars during their lifespan of use. DyoCore upgrades standard high bay and low bay fixtures with any type of reflectors, turning them into energy efficient, long-lasting, high efficiency LEDs, without the cost or hassle of purchasing new fixtures.

2 High Quality Brand Name Components DyoCore resources brand name High quality made LED products that have been thoroughly tested by nationally recognized testing laboratories (NRTL) that are certified by the Department of Energy (DOE), the Environmental Protection Agency (EPA), and OSHA to test for compliance with ENERGY STAR (ES), DesignLights Consortium, IESNA, UL/cUL, CE, IEC, IEEE, FCC and other agency standards. Savings Made Easy With Simple LED Retrofits High Bay LEDs replace Metal Halide (MH) and High Pressure sodium (HPS) fixtures from 50 Watts to 400 Watts with up to 80% energy savings and a 1 to 2 year ROIs. High Bays are easily upgraded to LED by a simple replacement of the bulb and removal of the in-line ballast (for an additional energy savings of 10%). LED upgrades equal an energy and maintenance savings of hundreds per fixture. DyoCore Energy Efficient LED Retrofits & Services: Manufacturing Warehouse Commercial Industrial Office Retail Parking Garages Churches Municipalities Retirement Communities Federal Facilities State Facilities Schools & Universities Hospitals Banks Auto Dealerships Distribution Facilities Hotels & Resorts Airports Gas Stations Gyms & Workout Facilities Tube LED Retrofits Metal Halide & HID Replacements Outdoor Mast and surface LED Retrofits Lighting Controls & Sensors Emergency & Fire LED Fixtures & Lighting Wall Packs & Flood Lighting Conversions Lighting Audits Recycling Programs And MORE!

3 Outdoor LED Systems It takes an immense amount of light to light the night and with lighting such as halogen, metal halide, sodium, and fluorescent this requires a significant amount of expensive and wasteful watts of energy. This cost is multiplied by the fact that most outdoor lighting runs 10 to 14 hours every night 24/7. When LEDs are used for an outdoor lighting retrofit they not only provide one of the fastest returns in cost, LEDs provide a substantially better quality of uniform bright clear light while saving tens of thousands in maintenance and energy costs. LED Refrigerated Display Lighting Until LEDs it took special temperature sensitive high wattage fluorescent tubes to light up refrigerated display cabinets. LEDs provide bright clear clean light while saving up to 50% or more in reduced wattage. Additionally, LEDs operate in a wider range of extreme temperatures while lasting up to 10x longer than fluorescent reducing maintenance and operating costs. LED Signs No more dimly lit signs and burnt out letters! Long life, bright LEDs are the perfect solution for all outdoor and indoor signage. LEDs provide exceptional performance in channel letter, border lighting, and box sign applications. Enjoy significant energy & maintenance savings, simplified low voltage installation, a more uniform quality of light, and substantially higher brightness. Workspace LED Lighting LEDs offer unlimited design possibilities with a large range of benefits that include function and aesthetics, easier installation, less frequent maintenance, lower heat emissions, immediate start up, no noise, and consistent performance. A better quality of light maximizes workplace performance in a variety of applications and environments. High Bay LED Lighting Very few equipment upgrades in a business provide a more significant return in investment than the retrofit of common high wattage poor quality high bay lighting to low wattage LEDs. Most high bay lighting wattage can be reduced up to 80% or more in wasted energy while significantly improving the amount of light, quality of light, and virtually eliminating the very expensive maintenance and replacement costs saved during the long life of new high efficiency LEDs.

4 Common styles of LED bulbs available for Retrofit Diffused bulbs In this style LED bulb, clusters of LEDs are covered by a dimpled lens which spreads the light out over a wider area. Available in standard Edison bases, these bulbs have many uses, such as area lighting for rooms, porches, reading lamps, accent lamps, hallways and low-light applications where lights remain on for extended periods. Dimmable Globe LED bulbs Designed for bathroom vanities or anywhere a globe bulb is required, these bulbs produce light equivalent to a 40-watt incandescent bulb, yet only consume 10 watts of power. Dimmable from 100% to 10%, these bulbs have a 200 degree beam angle to cast light in a wide area. Track Lighting Available in pin base or standard (Edison) base, LEDs are ideal for track lighting. LEDs do not contribute to heat buildup in a room because no matter how long they remain on, they do not get hot to the touch. Also, because they are 90% more efficient than incandescent lasting 20x longer and last 10 times longer than CFLs. Flood Reflector LEDs for Recessed Cans and Track lights, screw-in base LEDs are now available for standard recessed lighting pots and housings. They range from 7 to 19watts, with beam widths from (spot) to (Bee). They are 90% more efficient than incandescent and about 95% more than Halogen while lasting 10 times longer than their counterparts. Flame Tip, Candelabra Base LEDs Designed to replace incandescent candelabra bulbs, these flame tip LEDs deliver the equivalent light of watt incandescent while only drawing 3 to 4 watts of electricity and produce about 98% less heat while lasting up to 20x longer than incandescent candle bulbs. Additionally LED bulbs are substantially more durable than fragile decorative glass incandescent bulbs. LED Tube Lights Designed to replace fluorescent tube bulbs, these LED tubes typically between 9 and 22 watts replace traditional 25 to 40 watt fluorescent tubes. Other benefits include no flicker, no wasted ballast energy, instant on and 98% less heat. Because fluorescent lights are often installed in high ceilings in commercial sites, there are additional savings because the frequency of changing bulbs is greatly reduced. High Bay Down-light LEDs Designed to replace Metal Halite, Sodium and Fluorescent bulbs, these high efficiency LEDs deliver the equivalent light of 150 to 350 watt counterparts while only drawing 40 to 90 watts of electricity in addition to reducing the wasteful wattage of ballasts. Savings are compounded due to the high cost of older style bulb maintenance and constant replacement from burnout whereas LEDs will last 10x longer or more.

5 Direction Down and Street Lighting LEDs Designed to replace Metal Halite, Sodium and Fluorescent bulbs, these directional high efficiency LEDs deliver the equivalent light of 150 to 350 watt counterparts while only drawing 40 to 90 watts of electricity and reduces the wasteful wattage & maintenance of unnecessary ballasts. These LEDs are also directional allowing you to focus lighting where needed. Additional savings when eliminating the high cost of older style bulb maintenance and constant replacement from burnout. These LEDs boast from 50,000 to 100,000 hours of life. Flat Panel, Fluorescent Fixture Replacement LEDs Designed to replace drop ceiling Fluorescent Fixtures, these high efficiency LEDs panels deliver substantially better quality, cleaner and brighter light while drawing 50% to 70% less watts of electricity and reduces the wasteful wattage & maintenance of unnecessary ballasts. Flat panels come in a range of sizes making them simple to retrofit into any drop ceiling configuration and have a life expectancy of 50,000 hours. Corn LEDs Designed to replace a large variety of common found lighting requiring of dispersed light. High efficiency LED Corn Bulbs deliver substantially better quality, cleaner, brighter and more consistent light while utilizing 70% or less wattage than their counterparts. Corn Bulbs come in a range of sizes from 3 watts to 90 watts making them simple to retrofit into any fixture and have a life expectancy of 50,000 hours.