Industrial Luminaires

Transcription

1 Industrial Luminaires 1/2

2

3 Contents HIGH BAY LUMINAIRES Page Horizontal 6xx Crane 6xx Floodlight 6xx Special luminaires Regular 6xx Standard 6xx Basic 6xx LOW BAY LUMINAIRES Profile -250 W 9xx Profile 250 W 6xx Profile W 6xx Profile -70 W 6xx Hood luminaire + Ballast box Profile 54 W / 80 W 9xx1 41 for T5 Fluorescent FLUORESCENT LUMINAIRES Fluorescent T5 9xx1 41 Fluor. with Battery 9xx Fluorescent T8 9xx xx1 Fluor. with Battery 6xx1.800 Spotlight 6xx Installation kits

4 Contents 4 CONTENTS Alphabetically Basic Ballast Box for Hood Luminaire Calculation of Economy Crane Filter... 7 Floodlight Floodlight for Sand Blasting Fluorescent 2x36W, 2x58W... 42, 43 Fluorescent with Battery Fluorescent 2x54W, 2x80W Function of Luminaire... 6 Hood Horizontal... 9 Horizontal for Sand Blasting Horizontal with Instant Ignition Installation Kits Profile W, 250W Profile 250W Profile W Profile -70W Regular Spot Standard Track mounting system CONTENTS Acc. to Type Nr Suspension Chains Wall Bracket Ballast Box 9x125W Wall Bracket, Wall Bracket, 0 /25 / Pole Bracket, 0 /25 / Ceiling Bracket, 15 /30 / Suspension rod Fixing device for wire Beam and Wall bracket, Profile 80W Q Spot 80W Q Profile 125W Q Hood 125W Q Regular 250W Q Horizontal 250W Q Standard 250W Q Basic 250W Q Floodlight 250W Q Regular W Q Horizontal W Q Standard W Q Basic W Q Floodlight W Q Profile 70W ST Spot 70W ST Profile W ST/MT Profile 150W ST/MT Profile 250W ST/MT Regular 250W ST/MT Horizontal 250W ST/MT Horizontal 250W S/M for Sand Blasting Horizontal with Instant Ignition 250W SD Standard 250W ST/MT Basic 250W ST/MT Floodlight 250W ST/MT Floodlight 250W S/M for Sand Blasting Crane 250W SD with Instant Ignition Crane 250W SD Regular W ST/MT Horizontal W ST/MT Horizontal W S/M for Sand Blasting Horizontal with Instant Ignition W SD Standard W ST/MT Basic W ST/MT Floodlight W ST Floodlight W S/M for Sand Blasting Crane W SD with Instant Ignition Crane W SD Horizontal 0W ST/MT Floodlight 0W ST/MT Profile W MT Spot W MT Profile 150W MT Horiz. with Instant Ignition 250W MD Crane 250W MD Crane W MD Fluorescent 2x36W Fluorescent 2x36W with Battery Fluorescent 2x58W Fluorescent 2x58W with Battery Profile 250W Q Profile 250W ST/MT Profile W ST/MT Fluorescent 2x36W Fluorescent 2x58W Fluorescent 2x54W Fluorescent with Battery 2x54W Fluorescent 2x80W... 41

5 INDUSTRIAL LUMINAIRES When economy and quality come first I-Valo was founded in 1971, and it has been expanding ever since. I-Valo is an innovative company in the electrical branch, and in 0 it became a limited company in the Lexel Group. Our first luminaires were engineered in cooperation with major industrial companies. The aim was to develop luminaires that endure the most severe industrial conditions. The result was the i-valo Horizontal, a luminaire that has been successfully used in various branches of industry. Long experience and continuous product development enable I-Valo to offer today a wide range of industrial luminaires and solutions to the customers. Besides luminaires, I-Valo also makes customer-specific lighting and cost calculations. I-Valo Ltd. Valaisintehdas FIN Iittala FINLAND Tel: Fax: I-Valo QUALITY GUARANTEED BY ISO 9001 and ISO 11 Certificates. Production Enviroment 5

6 INDUSTRIAL LIGHTING The original luminaire with filter and dust rim 1. DUST PROTECTION 1.1 Filtering technique The i-valo industrial luminaires have an enclosed construction equipped with a unique, patented filtering system. When switched on or off, and during power failures, pressure balancing of i-valo luminaires is arranged through a filter, not through the packing as in conventional enclosed luminaires. All components inside the luminaire, e.g. the reflector, the light source, and the front glass, are completely protected against dust and corrosive gases. 1.2 Dust rim All i-valo High-bay luminaires are equipped with a dust rim that creates an "air cushion" and prevents dust from gathering on the outer surface of the glass. 2. CORROSION RESISTANCE The external metal parts of the luminaire are of aluminium, on most types coated with Epoxy powder to prevent corrosion in conditions harmful to bare aluminium. 3. INSTALLATION AND MAINTENANCE All luminaires are supplied complete with a fixing bracket to facilitate mounting. The need for maintenance is reduced to a minimum. We also offer a wide range of installation kits that make maintenance and lamp changes easy. 4. FUNCTION OF THE LUMINAIRE SWITCHED ON SWITCHED OFF Dust rim Dust rim Filter Filter When switched on, the lamp warms up the air inside the luminaire, and the warm air flows out through the filter drying and cleaning it at the same time. When switched off, air flows back into the luminaire through the filter that removes impurities and gases from the air. In both cases the air cushion directs air past the front glass and prevents dust from gathering on the glass. 6

7 Filtering system 1. PRESSURE BALANCING FILTER i-valo Standard luminaires are equipped with a pressure balancing filter that removes dust and impurities larger than 10µm. The pressure balancing filter reduces contamination and blackening. 2. DUST FILTER i-valo Low Bay and Regular luminaires are equipped with dust filters that remove dust and impurities larger than 0,01µm. The table below shows the capacity of the dust filter. 3. DOUBLE-EFFECT FILTER i-valo Horizontal luminaires are equipped with a double-effect filter incorporating dust and charcoal elements. The doubleeffect filter also removes corrosive gases. Pressure balancing filter Dust filter Double-effect filter Filtering ability of the dust filter Pass through the filter Removed by the filter 0,001 µm 0,01 µm 0,1 µm 1,0 µm 10 µm µm 0 µm Aerosols Normal impurities of open air Pigments Resin smoke Limestone dust Alcali lye vapour Sulphuric acid vapour NH 4 Cl-vapour Cement dust Soot black Oil smoke Metallurgial dust Flying ashes Foundry dust Metallurgial vapour Smoke from steel furnace Vapour and dust of cupola furnace Tobacco smoke Fog Dense fog Gas molecules Viruses Bacteria Pollen Rain 7

8 8

9 Horizontal 250 W / W / 0 W IP 64 F F F Protection class I t a 70/60/25 C Specification For heights: m 250/W m 0W Material: Aluminium and tempered safety glass Voltage: 230V 50Hz Power factor: cos 0,9 Lamp holder: E40 Mains current, nom. 250W 1,4A W 2,2A 0W 5,6A Start-up: 250W 2,3A W 3,6A 0W 7,3A Range of ambient temperature, t a 250W -30 C C W -30 C C 0W -30 C C Features Closed construction, air-pressure tested Pressure balancing through double filter With Epoxy powder coating (RAL 7040) Mains Entry Wiring box for -o- 5 x 2,5 mm 2 Option: 1,5 m cable and plug Note: Metal Halide luminaires are equipped with High Pressure Sodium ballast, please check suitability of lamp. 9

10 Type QE-250W-E40 QE-W-E40 S/M-250W-E40 S/M-W-E40 ST/MT-0W-E40 ILCOS Q Q S S/M S Weight 13,5 kg 14,0 kg 14,5 kg 16,0 kg 31,5 kg Light distribution V 2 V 2 V 1, 2, 2.5, 3 V 1, 2, 2.5, 3 V 1, 2 Auxiliary lamp facility Q = Mercury Vapour S = High Pressure Sodium M = Metal Halide Light Distribution V1 = narrow beam V2 = medium V2.5 = wide-medium V3 = wide 250/ W W 401 Safety lighting 6xx3. With 250W Halogen lamp, E27 With two wiring boxes for -o- 5 x 2,5 mm 2 Instant lighting 6xx3.800 with wiring box 6xx3.700 with cable and plug For instant lighting during run-up period of main discharge lamp With 250W Halogen lamp, E27 With start-up switch Ø Ø Light Distribution Curves C 0 C 45 C 90 C 90 C /V2 6137/V2 = 72% 6143/V2 6147/V2 = 74% 6233/V2 6237/V2 = 77% QE-250 W QE- W ST-250 W 10

11 = 79% /V2 6237/V2 0 cd/klm MT-250 W /V2 6267/V2 = 80% 800 ST/MT-0 W /V1 6267/V1 = 82% ST/MT-0 W = 85% /V2,5 6247/V2, ST- W 6243/V3 6247/V3 = 83% ST- W /V1 = 64% ST-250 W = 80% /V2,5 6237/V2, ST-250 W = 64% 6243/V1 ST- W /V2 = 80% ST- W

12 12 = 84% 6243/V3 MT- W = 79% 6233/V3 6237/V3 MT/ST-250 W = 77% 6243/V1 6247/V1 MT- W /V2 = 84% MT- W = 82% /V2,5 6243/V2, MT- 250/ W

13 Crane luminaire 250 W / W IP 64 Protection class I t a 70/60/25 C F Specification For heights: m Material: Aluminium and tempered safety glass Voltage: 230V 50Hz Power factor: cos 0,9 Lampholder: FC 2 with or without Instant Ignition Mains current, nom. 250W 1,4A W 2,2A Start-up: 250W 2,3A W 3,6A Range of ambient temperature, t a 250W -30 C C W -30 C C Instant Ignition -30 C C Features Closed construction, air-pressure tested Pressure balancing through double filter with shield With Epoxy powder coating (RAL 7040) Bracket with shock absorbers Instant Ignition of warm lamp with special starter Mains Entry 1,5 m cable and plug 13

14 Note Crane luminaires are supplied with double-ended lamps. This reduces the risk that possible vibration loosens the lamp from the socket. If Metal Halide lamps are used, instant ignition is not recommended, because the starter is sensitive to vibration. Install the luminaire transversally to the drive direction of the crane. Crane luminaires without Instant Ignition Type SD-250W-FC2 SD-W-FC2 MD-250W-FC2 MD-W-FC2 SD = High Pressure Sodium*) MD = Metal Halide*) *) double-ended lamps ILCOS SD SD MD MD Crane luminaires with Instant Ignition Type SD-250W-FC2 SD-W-FC2 ILCOS SD SD Weight 20,0 kg 21,0 kg 20,0 kg 21,0 kg Weight 21,0 kg 23,0 kg Light Distribution V 2 V 2 V 2 V 2 Light Distribution V 2 V 2 Light Distribution Curves Ø Ø 11 M C C 45 C 90 C 90 C Ø 510 Ø = 71% SD- W 14

15 Floodlight Specification W / W / 0 W 6267 For heights: m 250/W m 0W Material: Aluminium and tempered safety glass Voltage: 230V 50Hz Power factor: cos 0,9 Lamp holder: E40 Mains current, nom. 250W 1,4A W 2,2A 0W 5,6A Start-up: 250W 2,3A W 3,6A 0W 7,3A Range of ambient temperature, t a 250W -30 C C W -30 C C 0W -30 C C Features Closed construction, air-pressure tested Pressure balancing through double filter with shield With Epoxy powder coating (RAL 7040) Mains Entry 1,5 m cable and plug IP 64 Protection class I t a 70/60/25 C F 15

16 Type QE-250W-E40 QE-W-E40 S/M-250W-E40 S/M-W-E40 ST/MT-0W-E40 ILCOS Q Q S S S/M Weight 18,5 kg 19,0 kg 19,5 kg 21,0 kg 32,0 kg Light Distribution V 2 V 2 V 1, 2, 2.5, 3 V 1, 2, 2.5, 3 V 1, 2 Note: Metal Halide luminaires are equipped with High Pressure Sodium ballast, please check suitability of lamp. Q = Mercury Vapour S = High Pressure Natrium M = Metal Halide Light Distribution (LD), see page 11 V1 = narrow beam V2 = medium V2.5 = wide-medium V3 = wide 250/ W 0 W Ø Ø Ø 14 16

17 Horizontal with Instant Ignition 250/ W The body is similiar to Horizontal. Voltage can be turned off by means of a swich outside the luminaire. The luminaire is supplied with a double-ended lamp. With Metal Halide, please note that the starter is sensitive to vibration. 500 Ø 11 x Type ILCOS Weight LD LD = Light Distribution SD- 250W-FC2 SD- W-FC2 MD- 250W-FC2 MD- W-FC2 S S M M V2 = medium 16,0 kg 17,0 kg 16,0 kg 17,0 kg V 2 V 2 V 2 V Ø 510 LD see p.14 Horizontal for Sand Blasting Areas 250/ W The body is similiar to Horizontal. The luminaire is supplied with a 10mm thick tempered safety glass. The glass is protected by a wire mesh, and the dust rim is deeper. The double filter opening is shielded with a plate. 500 Ø 11 x 20 Type ILCOS Weight LD S/M- 250W-E40 S/M- W-E40 S S 16,0 kg 17,0 kg V 2 V 2 Ø 435 LD = Light Distribution V2 = medium 750 Floodlight for Sand Blasting Areas 250/ W 450 The luminaires are similiar to Floodlight. They are supplied with a 10 mm thick tempered safety glass. The glass is protected by a wire mesh, and the dust rim is deeper. The double filter opening is shielded with a plate. Ø Type ILCOS Weight LD S/M- 250W-E40 S/M- W-E40 S S 16,0 kg 17,0 kg V2 V2 Ø 14 (4 Pcs) LD = Light Distribution V2 = medium

18 18

19 Regular 250 W / W IP 64 Protection class I t a 55/45 C F F F 16 Specification For heights: m Material: Aluminium and tempered safety glass Voltage: 230V 50Hz Power factor: cos 0,9 Lamp holder: E40 Mains current, nom. 250W 1,4A W 2,2A Start-up: 250W 2,3A W 3,6A Range of ambient temperature, t a 250W -30 C C W -30 C C Features Closed construction, air-pressure tested Pressure balancing through dust filter Fixed dust rim Ballast box and fixing bracket with Epoxy powder coating (RAL 7040). Reflector outer surface of uncoated aluminium. Inner surface of vacuum metallized aluminium. Mains Entry Wiring box for -o- 5 x 2,5 mm 2 Option: 1,5 m cable and plug Note: Metal Halide luminaires are equipped with High Pressure Sodium ballast, please check suitability of lamp. 19

20 Type ILCOS Weight Light distribution QE-250W-E40 QE-W-E40 S/M-250W-E40 S/M-W-E40 Q Q S S 13,5 kg 14,0 kg 14,5 kg 16,0 kg V 2, 3 V 2 V 2, 3 V 1, 2, 3 QE = Mercury Vapour S = High Pressure Sodium M = Metal Halide Light distribution (LD) V1 = narrow beam V2 = medium V3 = wide Auxiliary lamp facility Safety lighting 6xx2. With 250W Halogen lamp, E27 With two wiring boxes for -o- 5 x 2,5 mm 2 Instant lighting 6xx2.800 with wiring box 6xx2.700 with 1.5 m cable and plug For instant lighting during run-up period of main discharge lamp With 250W Halogen lamp, E27 With start-up switch Ø 20

21 Light Distribution Curves C 0 C 45 C 90 C 90 C /V2 = 78% 6132/V3 = 77% 6142/V2 = 76% QE-250 W QE-250 W QE- W 6232/V2 = 78% 6232/V3 = 78% 6242/V1 = 81% ST-250 W ST-250 W ST- W 21

22 800 = 83% 6242/V ST- W = 84% 6242/V3 ST- W = 77% 6242/V3 500 cd/klm MT- W = 81% 6232/V MT-250 W = 78% 6232/V3 500 cd/klm MT-250 W = 74% 6242/V1 500 cd/klm MT- W = 83,5% 6242/V2 cd/klm MT- W

23 Standard 250 W / W IP 64 Protection class I t a 30 C F Specification Features Mains Entry For heights: m Material: Aluminium and tempered safety glass Voltage: 230V 50Hz Power factor: cos 0,9 Lamp holder: E40 Mains current, nom. 250W 1,4A W 2,2A Start-up: 250W 2,3A W 3,6A Range of ambient temperature, t a 250W -30 C C W -30 C C Closed construction, air-pressure tested Supplied with pressure balancing filter Ballast box and fixing bracket with Epoxy powder coating (RAL 7040). Reflector outer surface of uncoated aluminium. Inner surface of vacuum metallized aluminium. Two rubber grommets for -o- 5 x 2,5 mm 2 Option 1,5 m cable and plug Note: Metal Halide luminaires are equipped with High Pressure Sodium ballast, please check suitability of lamp. 23

24 Type ILCOS Weight Light distribution QE-250W-E40 QE-W-E40 S/M-250W-E40 S/M-W-E40 Q Q S S 13,5 kg 14,0 kg 14,5 kg 16,0 kg V 2 V 2 V 2, 3 V 2, 3 QE = Mercury Vapour S = High Pressure Sodium M = Metal Halide Light distribution (LD) V2 = medium V3 = wide Auxiliary lamp facility Instant lighting 6xx5.800 with with two rubber grommets 6xx5.700 with 1.5m cable and plug For instant lighting during run-up period of main discharge lamp With 250W Halogen lamp, E27 With start-up switch 500 Ø 11x Ø

25 Light Distribution Curves C 0 C 45 C 90 C 90 C /V2 6145/V2 = 72% 6235/V2 6245/V2 = 79% 6235/V3 6245/V3 = 75% QE-250/ W ST-250/ W ST-250/ W 6235/V2 6245/V2 = 87% 6235/V3 6245/V3 = 86% MT-250/ W MT-250/ W 25

26

27 Basic 250 W / W IP 23 Protection class I t a 35 C F Specification For heights: m Material: Aluminium Voltage: 230V 50Hz Power factor: cos 0,9 Lamp holder: E40 Mains current, nom. 250W 1,4A W 2,2A Start-up: 250W 2,3A W 3,6A Range of ambient temperature, t a 250W -30 C C W -30 C C Features Open construction Reflector outer surface of uncoated aluminium. Inner surface of vacuum metallized aluminium. Mains Entry Two rubber grommets for -o- 5 x 2,5 mm 2 Option: 1,5 m cable and plug Note: Metal Halide luminaires are equipped with High Pressure Sodium ballast, please check suitability of lamp. 27

28 Type QE-250W-E40 QE-W-E40 S/M-250W-E40 S/M-W-E40 QE = Mercury Vapour S = High Pressure Sodium M = Metal Halide ILCOS Q Q S S Weight 13,5 kg 14,0 kg 14,5 kg 16,0 kg 417 Light distribution V 2 V 2 V 2, 3 V 2, Ø 11x20 Auxiliary lamp facility Instant lighting 6xx6.800 with two rubber grommets 6xx6.700 with 1.5m cable and plug For instant lighting during run-up period of main discharge lamp With 250W Halogen lamp, E27 With start-up switch Light distribution V2 = medium V3 = wide Ø Light Distribution Curves 6136/V2 6146/V2 = 77% 6236/V2 6246/V2 = 84% C 0 C 45 C 90 C 90 C QE-250/ W ST-250/ W 6236/V3 6246/V3 = 83% 6236/V2 6246/V2 = 92% 6236/V3 6246/V3 = 93% ST-250/ W MT-250/ W MT-250/ W 28

29 Profile 250 W / W IP 64 Protection class I t a 40/35 C 16 F Specification For heights: m Material: Aluminium and tempered safety glass Voltage: 230V 50Hz Power factor: cos 0,9 Lamp holder: E40 Mains current, nom. QE 250W 1,3A ST/MT 250W 1,4A ST/MT W 2,2A Start-up: QE 250W 2,2A ST/MT 250W 2,3A ST/MT W 3,6A Range of ambient temperature, t a C C C C C C Features Closed construction, air-pressure tested Pressure balancing through dust filter With Epoxy powder coating (RAL 7040) Note: Metal Halide luminaires are equipped with High Pressure Sodium ballast, please check suitability of lamp. Mains Entry With 2 Pg16 cable entries at one end for -o- 5 x 2,5 mm 2 Option: 1,5 m cable and plug Auxiliary lamp facility Safety lighting 9xx1. With W Halogen lamp, E27 With 4 Pg16 cable entries at one end for -o- 5 x 2,5 mm 2 Instant lighting 9xx1.800 with 2 Pg16 cable entries at one end for -o- 5 x 2,5 mm 2 9xx1.700 with 1,5m cable and plug For instant lighting during run-up period of main discharge lamp With W Halogen lamp, E 27 With start-up switch 29

30 Type QE 250W E40 ST/MT 250W E40 ST/MT W E40 ILCOS Q S S Weight 10,0 kg 11,0 kg 12,5 kg Light distribution V 3 V 3 V 3 Licht Source Q = Mercury Vapour S = High Pressure Natrium M = Metal Halide Light distribution V2 = medium V3 = wide Light Distribution Curves C 0 C 45 C 90 C 90 C = 71% 9241/ 9231 = 82% QE-250 W cd/klm ST/MT-250/ W 10 cd/klm

31 6231 Profile 250 W F F F IP 64 Protection class I t a 35 C Specification For heights: m Material: Aluminium and tempered safety glass Voltage: 230V 50Hz Power factor: cos 0,9 Lamp holder: E40 Mains current, nom. 1,4A Start-up: 2,3A Range of ambient temperature, t a -30 C C Features Closed construction, air-pressure tested Pressure balancing through dust filter With Epoxy powder coating (RAL 7040) Mains Entry With 2 Pg16 cable entries at one end for -o- 5 x 2,5 mm 2 Option: 1,5 m cable and plug Note: Metal Halide luminaires are equipped with High Pressure Sodium ballast, please check suitability of lamp. Type 6231 ST/MT 250W E40 ILCOS S Weight 10,0 kg Light distribution V 2, 3 S = High Pressure Sodium M = Metal Halide Light distribution V2 = medium V3 = wide 31

32 6231 Auxiliary lamp facility Safety lighting 6xx1. With W Halogen lamp, E27 With 4 Pg16 cable entries at one end for -o- 5 x 2,5 mm 2 Instant lighting 6xx1.800 with 2 Pg16 cable entries at one end for -o- 5 x 2,5 mm 2 6xx1.700 with 1,5m cable and plug For instant lighting during run-up period of main discharge lamp With W Halogen lamp, E 27 With start-up switch Light Distribution Curves /V3 = 76,6% C C 45 C C 90 C cd/klm ST-250 W 6231/V2 = 79,3% /V3 = 74% cd/klm cd/klm MT/ST-250 W MT-250 W 32

33 Profile 80 W / W / 125 W / 150 W IP 64 Protection class I t a 35/40 C F Specification For heights: m Material: Aluminium and tempered safety glass Voltage: 230V 50Hz Power factor: cos 0,9 Lamp holder: QE 80W/125W E27 ST 150W E40 ME /150W E27 Mains current, nom. Q 80W 0,45A Q 125W 0,7A MT/ST 150W 0,85A MT/ST W 0,6A Start-up: Q 80W 0,65A Q 125W 1,1A MT/ST 150W 1,2A MT/ST W 1,0A Range of ambient temperature, t a 6111/ 6121/ 6311: -30 C C 6221/ 6321: -30 C C Features Closed construction, air-pressure tested Pressure balancing through dust filter With Epoxy powder coating (RAL 7040) Mains Entry With 2 Pg16 cable entries at one end for -o- 5 x 2,5 mm 2 Option: 1,5 m cable and plug Type ILCOS Weight Light distribution QE 80W E27 QE 125W E27 ST/MT 150W E40 ME/MC W E27 ME/MC 150W E27 Q Q S M M 6,0 kg 6,5 kg 8,0 kg 7,5 kg 8,0 kg V 3 V 3 V 2, 3 V 3 V 3 33

34 Auxiliary lamp facility Safety lighting 6xx1. With W Halogen lamp, E27 With 4 Pg16 cable entries at one end for -o- 5 x 2,5 mm 2 Instant lighting 6xx1.800 with 2 Pg16 cable entries at one end for -o- 5 x 2,5 mm 2 6xx1.700 with 1,5m cable and plug For instant lighting during run-up period of main discharge lamp With W Halogen lamp, E 27 With start-up switch Light Distribution Curves C 0 C 45 C 90 C 90 C , 6121 = 64% 6221/V3 = 76,6% cd/klm cd/klm QE-80/125 W ST/MT-150 W 6221/V2 = 79,3% 6311, 6321/V3 = 74% cd/klm cd/klm MC-/150 W ST/MT-150 W

35 Profile 70 W / W IP 64 Protection class I t a 40 C F Specification For heights: 3...8m Material: Aluminium and polycarbonate cover Voltage: 230V 50Hz Power factor: cos 0,9 Lamp holder: ST 70W E27 ST W E40 Mains current, nom. ST 70W 0,45A ST W 0,6A Start-up: ST 70W 0,6A ST W 1,0A Range of ambient temperature, t a -30 C C Features Closed construction, air-pressure tested Pressure balancing through dust filter With Epoxy powder coating (RAL 7040) Type ST 70W E27 ST W E40 S = High Pressure Sodium ILCOS S S Mains Entry With 2 Pg16 cable entries at one end for -o- 5 x 2,5 mm 2 Option: 1,5m cable and plug Weight 6,0 kg 6,0 kg Light distribution V 2, 3, 5 V 2, 3, 5 Light distribution V2 = medium V3 = wide V5 = asymmetric 35

36 Auxiliary lamp facility Safety lighting 6xx1. With W Halogen lamp, E27 With 4 Pg16 cable entries at one end for -o- 5 x 2,5 mm 2 Instant lighting 6xx1.800 with 2 Pg16 cable entries at one end for -o- 5 x 2,5 mm 2 6xx1.700 with 1,5m cable and plug For instant lighting during run-up period of main discharge lamp With W Halogen lamp, E 27 With start-up switch Light Distribution Curves , 6211/V3 = 75,5% C 0 C 45 C C C cd/klm , 6211/V2 = 79,3% 30 ST-70/ W , 6211/V5 = 69% cd/klm cd/klm ST-70/ W ST-70/ W

37 6126 Hood luminaire 125 W IP 65 Protection class I t a C F Specification Material: Aluminium and tempered safety glass Reflector: anodised aluminium Packings: heat resistant silicone Range of ambient temperature, t a -30 C...+ C Lamp holder: E27 Light source: QE = Mercury Vapour Features Closed construction, air-pressure tested With Epoxy powder coating (RAL 7040) Two Pg16 cable entries at one end for -o- 5 x 2,5 mm 2 Ballast installed separately Application Hood of paper machine Areas with high temperature and humidity Ballast box 6059 Can be used for 9 hood luminaires, more information on page 39. Type ILCOS Weight Light distribution 6126 QE 125W E27 Q 3,5 kg V 3 = wide 37

38 Installation kits Ceiling and wall bracket 6066 for mounting luminaires at an angle. Light Distribution Curve C 0 C 45 C 90 C 90 C /V3 = 64% cd/klm QE-125 W 38

39 Ballast box for 9 hood luminaires 9 x 125 W 6059 IP 65 Protection class I t a 25 C With RCC-breaker Specification Material: Aluminium Power factor: cos 0,9 Wiring box: -o- 5 x 2,5 mm 2 (or -o- 5 x 1,5 mm 2 for 3 luminaires) Weight: 25,5 kg Features With Epoxy powder coating (RAL 7040) Wiring diagram Supplied with recidual current circuit breaker Recidual Current Circuit Breaker 30 ma Connection of Luminaires with silicone cables 5 x 1,5 S Ballast N 5 x 1,5 S 1 L1 L2 L3 N 2 L1 L2 L3 N 3 L1 L2 L3 N V / 230V 50 Hz L1 L2 L3 N PE L1 L2 L3 N 30 yf x 3 L1 L2 L3 PE PE PE N N N N N 5 x 1,5 S 4 L1 L2 L3 N 5 x 1,5 S 7 L1 L2 L3 N 5 L1 L2 L3 N 8 L1 L2 L3 N 6 L1 L2 L3 N 9 L1 L2 L3 N 39

40 40

41 Profile Luminaire for T5 Fluorescent Lamps 2x54W / 2x80W IP 64 Protection class I t a 45 C 16 F Specification Features Mains Entry For heights: 3...8m Material: Aluminium and tempered safety glass Voltage: 230V Hz/DC Power factor: cos 0,95 Lamp holder: G5 Mains current: 2 x 54W approx. 0,6A 2 x 80W approx. 0,8A Range of ambient temperature,t a -15 C C Light sources: Osram FQ 54W (T5) Ø 16 Osram FQ 80W (T5) Ø 16 Type FD-2 x 54W-G5 FD-2 x 80W-G5 ILCOS FD FD Closed construction, air-pressure tested Pressure balancing through dust filter With Epoxy powder coating (RAL 7040) 2 x 80W fitting with two electronic ballasts, 2 x 54W fitting with one electronic ballast, not dimmable Weight 12 kg 14 kg Light distribution V3 = wide V3 = wide Two Pg16 cable entries at one end for -o- 5 x 2,5 mm 2 Option: 1,5m cable and plug Light Distribution Curve FD - 80W - G5 x / = 80% (25 ) Type A B C C B A 41

42 Luminaire for T8 Fluorescent Lamps 2x36W / 2x58W IP 64 Protection class I t a 40 C 16 F Specification For heights: 2...5m Material: Zinc plated steel, polycarbonate cover Voltage: 230V 50Hz Power factor: cos 0,9 Lamp holder: G13 Mains current: 2 x 36W 0,5A 2 x 58W 0,7A Range of ambient temperature,t a -15 C C Light sources: T8 Ø 26 Features Body of zinc plated steel Supplied with pressure balancing filter With Epoxy powder coating (RAL 7040) Equipped with low-loss electromagnetic ballasts On request with electronic ballast, not dimmable, t a 30 C On request with through wiring facility 5 x 2,5 mm 2 Mains Entry Two Pg16 cable entries at one end for -o- 5 x 2,5 mm 2 Option: 1,5m cable and plug Light Distribution Curve 9430, 9440 = 62% Type ILCOS Weight Light distribution FD-2 x 36W-G13 FD-2 x 58W-G13 FD FD 7,5 kg 8,0 kg V 3 = wide V 3 = wide 160 FD - 58W - G13 x 2 C Type A B C B A

43 Luminaire for T8 Fluorescent Lamps 2x36W / 2x58W IP 64 Protection class I t a 50 C F Specification For heights: 2...5m Material: Aluminium body with polycarbonate cover Voltage: 230V 50Hz Power factor: cos 0,9 Lamp holder: G13 Mains current: 2 x 36W 0,5A 2 x 58W 0,7A Range of ambient temperature, t a -15 C C Light sources: T8 Ø 26 Features Body of extruded aluminium profile Pressure balancing through dust filter With Epoxy powder coating (RAL 7040) Mains Entry Two Pg16 cable entries at one end for -o- 5 x 2,5 mm 2 Option: 1,5m cable and plug On request with electronic ballast, not dimmable, t a 35 C Light Distribution Curves FD - 58 W x = 60% = 64% Type ILCOS Weight Light distribution Liit FD-2 x 36W-G13 FD-2 x 58W-G13 FD FD 11,0 kg 11,0 kg V 3 = wide V 3 = wide FD - 36 W x 2 Type A B C C B A 43

44 Luminaire with Battery for Emergency Lighting 2x36W / 2x58W IP 64 Protection class I t a 25 C F Specification For heights: 2...5m Material: Aluminium body with polycarbonate cover Voltage: 230V 50Hz Power factor: cos 0,9 Lamp holder: G13 Mains current: 2 x 36W 0,7A 2 x 58W 0,8A Range of ambient temperature, t a -0 C C Features Closed construction, air-pressure tested Pressure balancing through dust filter With Epoxy powder coating (RAL 7040) Supplied with built-in battery, charger and control unit On request with electronic ballast Emergency Lighting In case of power failure, control unit switches on battery Operating time: 1 hour Lamp marked for this purpose serves as emergency lighting Battery not connected until upon installation Type ILCOS Weight Light distribution FD-2 x 36W-G13 FD-2 x 58W-G13 FD-2 x 54W-G5 FD FD FD 11,0 kg 13,0 kg 12,0 kg V 3 = wide V 3 = wide V 3 = wide C B 350 Type A B C 44 A

45 Spotlight 70 W / 80 W / W Specification Material: Aluminium and tempered safety glass Voltage: 230V 50Hz Power factor: cos 0,9 Lamp holder: E27 Light sources: QE, S or ME Range of ambient temperature, t a -30 C C Features Enclosed construction With Epoxy powder coating (RAL 7040) Light source easy to replace Beam easy to direct as desired with joint allowing rotation and adjustment in two directions Mains Entry Two Pg16 cable entries at one end for -o- 5 x 2,5 mm 2 Option: 1,5 m cable and plug Installation Type ILCOS Weight Light distribution Mounting through lugs on ballast box QE-80W-E27 S-70W-E27 M-W-E27 Q S M 5,5 kg 6,0 kg 6,5 kg V 1 V 1 V 1 Light Distribution Different photometrics will be achieved by the use of clear or coated lamps. Q = Mercury Vapour S = High Pressure Natrium M = Metal Halide Light Distribution V1 = narrow beam IP 65 Protection class I t a 25 C F 45

46 Light Distribution Curves /V1 = 66% C 0 C 45 C 90 - C C QE-80 W 1 1 cd/0lm /V1 = 72% 6207/V1 = 65% - - Ø SC-70 W cd/0lm SE-70 W 1 cd/0lm /V1 = 69% 6317/V1 = 67% cd/0lm cd/0lm MC- W ME- W 46

47 Installation Kits 6020 Suspension chains standard length 2 x 4 m other lengths on request hot galvanized steel Ø 2 mm hooks Ø 5 mm of acid proof steel Suspension rod standard length 1 meter other lengths on request hot galvanized steel 4x30 mm ,6 0 Ø 6,7 Wire 6079 Wire bracket 1 pair galvanized steel 6076 Ceiling/Wall bracket mounting angle 15 / 30 / 45 galvanized steel Ø Ø Wall bracket / Beam bracket horizontal installation galvanized steel 6091 Wall bracket / Beam bracket mounting angle 25 galvanized steel 47

48 Installation Kits Ø 11 Ø Wall bracket mounting angle 0 / 25 / 45 galvanized steel, with Epoxy powder coating 6063 Pole bracket for Ø 60 mm mounting angle 0 / 25 / 45 galvanized steel, with Epoxy powder coating Ø Ø 11 Ø Wall bracket mounting angle 45 or horizontal mounting mounting with two brackets aluminium, with Epoxy powder coating 6040 Wall bracket mounting angle steplessly adjustable aluminium, chain of hot galvanized steel Ø 2mm Track mounting system The track mounting system is designed to facilitate servicing of high-bay luminaires in factories where the use of scaffolding, lifting equipment, etc. is difficult. Luminaires are mounted on tracks that are installed on a running rail. For servicing and lamp change, the luminaires are easy to move to a servicing position and then back to the original place. 48

49 INDUSTRIAL LUMINAIRES When economy and quality come first In many branches of industry, dust and dirt will slowly but permanently deteriorate the illuminating capacity of lighting. Reasons: high ambient temperature steam and moisture dust and other impurities corrosive gases Consequences: increased number of errors decreased working efficiency increased risk of accidents To constantly service and clean, or to add more luminaires in order to maintain the required lighting standard is not an economical solution! Over the average economical life of a luminaire, service expenses are much less than the energy cost that is almost three quarters of the total expenses. TOTAL EXPENSES Example of the division of lighting costs in process industry over a period of 10 years Investments 16% Energy 73% Light sources 6% Capital 3% Maintenance 2% 49

50 INDUSTRIAL LUMINAIRES When economy and quality come first In order to reduce energy consumption and cut operating costs, many suggestions and techniques have been introduced and practised. How much energy a lighting system will save, can only be evaluated in comparison to other systems with the same lighting capacity. Annual costs 100 EUR i-valo conventional lighting Energy costs Cost of service and lamp changing Lamps and spare parts The graph above compares a filtered i-valo luminaire with a conventional one. Due to their constant cleanness, fewer i-valo luminaires are needed to produce the same lighting capacity after one maintenance-free year. This means savings in energy, capital, maintenance and running costs. 50

51

52 I-Valo Ltd. FIN Iittala FINLAND Telefon Telefax