Fluxa Area floodlights for high pressure discharge lamps and LEDs

Transcription

1 Fluxa Area floodlights for high pressure discharge lamps and s Fluxa is a series of area floodlights with symmetrical or wide beam reflectors. There are 4 sizes for high pressure discharge lamps or with s, in various wattages and beam distributions. Fluxa is available with two different mounting systems; either with mounting bracket or Fluxa G for pole mounting. Fluxa Mini G lends itself well to being used in combination with larger Fluxa models. Three sizes are available with energy efficient s and precise optical lenses for uniform illumination with high lux levels. 214 Fluxa ADMINISTRATION & LAGER Torbenfeldvej Vallensbæk Strand Tel.: Fax.: Mail: info@deluxdk.com SHOWROOM House of Dreams Vallensbækvej Vallensbæk

2 Fluxa A Kategorie Fluxa A, wide beam integral temperature monitoring device, protection class I, IP65 windage area AW 0.11 m 2 die cast aluminium housing, polyester powder coated, all exterior steel parts are stainless steel, tempered safety glass, silicon gasket, closure with 4 stainless steel screws, hinged front frame, powder coated aluminium mounting bracket with tilt scale: 4 holes Ø 8.m, spacing 70 mm (120 mm), 2 drilled holes Ø m, spacing mm, 1 centre hole Ø 22 mm, tilt range 210, M20 cable gland, integral converter Fluxa A, wide beam, dimmable C C black 46 x 1.2 W neutral white 7.5 kg white silver grey 10 1 m Fluxa A, wide beam, dimmable 50% C C black 46 x 1.2 W neutral white 7.5 kg white silver grey 10 1 m Fluxa A D 24 m 27 m 32 m Eav 9 Lx 7 Lx 5 Lx Emin/Eav Fluxa A s, replacement modules available

3 Fluxa B Fluxa B, wide beam integral temperature monitoring device, protection class I, IP54 windage area AW 0.17 m 2 cast aluminium housing, polyester powder coated, all exterior steel parts are stainless steel, tempered safety glass, silicon gasket, closure wtih 2 stainless steel screws, hinged front frame, powder coated aluminium mounting bracket with tilt scale: 4 drilled holes Ø 8.m, spacing 70 mm (120 mm), 2 drilled holes Ø m, spacing mm, 1 centre hole Ø 22 mm, tilt range 210, M20 cable gland, integral converter ,5 8,5 Fluxa B 250, W, wide HIT-DE beam, dimmable Part number* Colour Lamp Lampholder Weight Half Main beam angle γ γ black HIT-DE 250 W Fc kg C C silver black grey 52 x 1.6 W neutral white 12.2 kg silver grey 400 Fluxa B 250, W, wide HST-DE beam, dimmable 50% Part number* Colour Lamp Lampholder Weight Half Main beam angle γ γ black HST-DE 250 W Fc kg C C silver black grey 52 x 1.6 W neutral white 12.2 kg silver grey 400 Fluxa B D 24 m 28 m 32 m Eav 14 Lx 11 Lx 8 Lx Emin/Eav Fluxa B s, replacement modules available

4 Accessories Fluxa A, B and C Accessories for Fluxa A black Corner fixing bracket B, aluminium, white polyester powder coated, silver grey for mounting floodlights on corners Accessories for Fluxa A, B black Universal pole clamp, aluminium, white polyester powder coated, stainless steel bolts, silver grey for mounting on poles Ø 40-1m black Crossbar, for pole D1= 76 mm, white for two luminaires, silver grey hot dip galvanized steel, polyester powder coated unpainted Crossbar, for pole D1= 76 mm, for two luminaires, hot dip galvanized steel black Crossbar, for pole D1= 89 mm, white for two luminaires, silver grey hot dip galvanized steel, polyester powder coated unpainted Crossbar, for pole D1= 89 mm, for two luminaires, hot dip galvanized steel Accessories for Fluxa A, B, C black Wall plate B, aluminium, white silver grey polyester powder coated, for additional support on unstable surfaces Accessories only for Fluxa A black Louvre, stainless steel, to reduce lateral glare, white silver grey for mounting on front of floodlight Ballasts for Fluxa C 1000 W, IP65 Part number Power factor Description LPF Ballast for HIT- and HST-lamps 1000 W HPF Ballast for HIT-lamps 1000 W HPF Ballast for HST-lamps 1000 W 54 2 Accessories for Fluxa B/Fluxa BG/Fluxa B - with arm Part number Description Glare shield 322 x 8m, continuously adjustable 45mm, to reduce glare from light reflected backwards Accessories for Fluxa C/Fluxa C - with arm Part number Description Glare shield 418 x 8m, adjustable 3m, to prevent glare from light reflected backwards Accessories for Fluxa A, Fluxa AG, Fluxa A - with arm, asymmetrical beam Part number Description Glare shield 285 x 8m, continuously adjustable 45mm, to reduce glare from light reflected backwards Accessories for Fluxa A/Fluxa AG/Fluxa A - with arm, wide beam Part number Description Glare control shield, to prevent glare from direct light from lamp Fluxa A, B and C

5 Fluxa AG, wide beam integral temperature monitoring device, protection class I, IP65 windage area AW 0.11 m 2 die cast aluminium housing, polyester powder coated, all exteriorsteel parts are stainless steel, tempered safety glass, silicon gasket, closure with 4 stainless steel screws, hinged front frame, adjustable bracket assembly: 2 drilled holes Ø 8.m, spacing 64 mm, 2 drilled holes Ø 8.m, spacing 56 mm, tilt range 15, M20 cable gland, integral converter , Fluxa AG m Fluxa AG, wide beam, dimmable C C black 46 x 1.2 W neutral white 7.5 kg white silver grey 10 1 m Fluxa AG, wide beam, dimmable 50% C C black 46 x 1.2 W neutral white 7.5 kg white silver grey Accessories for Fluxa AG (see page 231) Fluxa AG D 24 m 27 m 32 m Eav 9 Lx 7 Lx 5 Lx Emin/Eav s, replacement modules available Fluxa AG 229

6 Fluxa BG, wide beam integral temperature monitoring device, protection class I, IP54 windage area AW 0.19 m 2 die cast aluminium housing, polyester powder coated, all exterior steel parts are stainless steel, tempered safety glass, silicon gasket, closure with 4 stainless steel screws, hinged front frame, adjustable bracket assembly: 2 drilled holes Ø 8.m, spacing 64 mm, 2 drilled holes Ø 8.m, spacing 56 mm, tilt range 15, M20 cable gland, integral converter ,5 Fluxa BG 600 Fluxa BG, wide beam, dimmable C C black 52 x 1.6 W neutral white 1 kg silver grey Fluxa BG, wide beam, dimmable 50% C C black 52 x 1.6 W neutral white 1 kg silver grey Accessories for Fluxa AG and BG black Pole top fitter for pole Ø 60 mm white for one luminaire silver grey black Pole top fitter for pole Ø 76 mm white for one luminaire silver grey black Pole top fitter for pole Ø 60 mm white for two luminaires silver grey black Pole top fitter for pole Ø 76 mm white for two luminaires silver grey Part number Colour Lamp black Wall plate G*, for one luminaire Fluxa AG, BG, aluminium, white polyester powder coated, for additional support on unstable surfaces silver grey * Without the wall plate, stable installation is only possible on hard surfaces, e.g. metal. For installation on all normal surfaces, e.g. masonry, brick walls etc., the wall plate should be used. Fluxa BG D 24 m 28 m 32 m Eav 14 Lx 11 Lx 8 Lx Emin/Eav s, replacement modules available Fluxa BG 231

7 Fluxa A - with arm ,5 Fluxa A - with arm, wide beam integral temperature monitoring device Protection class I, IP65 Windage area AW 0,11 m 2 die cast aluminium housing, polyester powder coated, all exterior steel parts are stainless steel, tempered safety glass, silicon gasket, closure with 4 stainless steel screws, hinged front frame, 230 mm arm, 2 drilled holes ø 10.5, spacing mm, M20 cable gland, integral converter Fluxa A - with arm, wide beam, dimmable C C black 46 x 1.2 W neutral white 8.0 kg white silver grey Fluxa A - with arm, wide beam, dimmable 50% C C black 46 x 1.2 W neutral white 8.0 kg white silver grey m 1 m Fluxa A - with arm D 24 m 27 m 32 m Eav 9 Lx 7 Lx 5 Lx Emin/Eav Fluxa A - with arm s, replacement modules available

8 Fluxa B - with arm ,5 Fluxa B - with arm, wide beam integral temperature monitoring device protection class I, IP54 windage area AW 0,19 m 2 cast aluminium housing, polyester powder coated, all exterior steel parts are stainless steel, tempered safety glass, silicon gasket, closure with 2 stainless steel screws, hinged front frame, arm 230 mm, 2 drilled holes Ø 10.m, spacing mm, M20 cable gland, integral converter Fluxa B - with arm, wide beam, dimmable C C black 52 x 1.6 W neutral white 1 kg silver grey 400 Fluxa B - with arm, wide beam, dimmable 50% Part number Colour Weight Half beam angle γ C C black 52 x 1.6 W neutral white 1 kg silver grey Accessories for Fluxa B - with arm and C with arm black Wall plate C*, for one luminaire Fluxa BA, CA, aluminium, silver grey polyester powder coated, for additional support on unstable surfaces * Without the wall plate, stable installation is only possible on hard surfaces, e.g. metal. For installation on all normal surfaces, e.g. masonry, brick walls etc., the wall plate should be used. Fluxa B - Ausleger D 24 m 28 m 32 m Eav 14 Lx 11 Lx 8 Lx Emin/Eav Fluxa B - with arm s, replacement modules available