G H I J K G DIMMING. QS no dimming 1 0. (10%) 3-wire hot dim EcoSystem (10%) digital dim U 0 Mark 7 (1% HO 5% HE) 0-10 V M 0 Mark 10 (1%) hot dim N 0

Transcription

1 TUBO 150 T5 Date Project Type Quantity Contact/phone Product Description 6" diameter surface mounted or suspended extruded aluminum profile, powder coated white. Endcaps made of solid aluminum, available in different finishes Enhanced glare control through snap on opal cover for uniform illumination and increased light transmission at 69 lm/w and a total light fixture efficiency of η = 93% T5 lamps with various voltage, dimming and emergency options available. 3 ft. T5 inset equipped with either 21W HE or 39W HO ballasts 4 ft. T5 inset equipped with either 28W HE or 54W HO ballasts 5 ft. T5 inset equipped with either 35W HE or 80W HO ballasts N O A B C D E F G H I J K Order Options A RANGE Tubo 150 T5 N B INSTALLATION linear 1 C MOUNTING QS surface / ceiling 3 QS 78" cable suspension 4 white junction box cover angular cable 8 suspension white junction box cover (max. 45º) 10 Business Day QuickShip items D TYPE E F 1 lamp T5 offset 2 cross section LAMP QS HE standard output 1 0 HO high output 2 0 VOLTAGE 120V (Mark 7 10) V (Mark 7 10) 6 QS 120 / 277 V UNV 7 347V (non dim only) 9 G DIMMING QS no dimming 1 0 Hi-lume 3D (1%) 3-wire hot dim H 0 Hi-lume 3D (1%) digital dim D 0 EcoSystem H-Series S 0 (1%) digital dim EcoSystem H-Series T 0 (10%) 3-wire hot dim EcoSystem (10%) digital dim U 0 Mark 7 (1% HO 5% HE) 0-10 V M 0 Mark 10 (1%) hot dim N 0 H EMERGENCY QS no emergency 0 emergency circuit C quantity of 90 min. EM pack # EM battery pack only for non-dim fixtures > 3' for dimmable fixtures, consult factory I J SHIELDING opal COLOR gray 7 6 QS white 7 7 black 7 8 K DIMENSION 34 1/2" 3' QS 46 1/2" 4' " 5' /2" 3'+3' " 4'+3' QS 88" 4'+4' custom length x x x 0 For custom lengths from 23" to max. 500" see our light system configurator at systems.xalusa.com O Fixture detail Finish 76 gray 77 white 78 black XAL INC TEL: (212) FAX: (212) WWW. 01/2015

2 TUBO 150 T5 PHOTOMETRY HP opal cover 4ft e LED CANDELA DISTRIB e 2 LED CANDELA DISTRIBUTION MINIMAL 40 e opal cd/klm C0/C180 η=66.3% C90/C270 MINIMAL 40 e 2 opal cd/klm C0/C180 η=66.3% C90/C270 ZONAL LUMEN SUMMARY LUMENS PER ZONE e LED HP opal e 2 LED HP opal e LED HP opal e 2 LED HP opal XAL INC TEL: (212) FAX: (212) WWW. 01/2015

3 TUBO 150 T5 Drawing SURFACE L 35 1/8" 47 1/8" L/2-1 3/8" L 58 5/8" 65 1/8" 76 5/8" (L - 7 5/16") x 1/3 + (L - 7 5/16") x 1/3 L 88 5/8" SUSPENDED J-BOX (BY OTHERS) MAX. 78 3/4" L 35 1/8" TO 88 5/8" MAX. 78 3/4" MAX. 78 3/4" L 35 1/8" TO 88 5/8" L 35 1/8" TO 88 5/8" OFFSET 4 9/16" XAL INC TEL: (212) FAX: (212) WWW. 01/2015

4 TUBO 150 T5 T5 light inset no dimming Mark 10 (10%) line voltage dimming neutral (white) ground (green) phase (black) use phase for Mark 10 Hi-lume 3D (1%) 3-wire hot dim EcoSystem (10%) 3-wire hot dim Hi-lume 3D (1%) digital dim EcoSystem H-Series (1%) digital dim EcoSystem (10%) digital dim Mark 7 (1% HO 5% HE) 0-10V dim T5 light inset with emergency circuit no dimming Mark 10 (10%) line voltage dimming neutral (white) ground (green) phase (black) use phase for Mark 10 Hi-lume 3D (1%) 3-wire hot dim EcoSystem (10%) 3-wire hot dim Hi-lume 3D (1%) digital dim EcoSystem H-Series (1%) digital dim EcoSystem (10%) digital dim Mark 7 (1% HO 5% HE) 0-10V dim XAL INC TEL: (212) FAX: (212) WWW. 01/2015

5 SURFACE LED T5 L 35 1/8" 47 1/8" WARNING: For your safety read and understand these instructions completely before starting installation. Disconnect power supply before installing, servicing or checking. Retain these instructions for ordinary and special maintenance and servicing purposes. L/2-1 3/8" Please do not touch the LEDs! Wear ESD protective clothing SUSPENDED LED L 58 5/8" 65 1/8" 69 5/8" 76 5/8" 81 1/8" (L - 7 5/16") x 1/3 + (L - 7 5/16") x 1/3 IMPORTANT: This XAL fixture is intended for installation in accordance with the National Electrical Code and local regulations. To assure full compliance with local codes and regulations, check with your local electrical inspector before installation. These codes should be carefully studied before starting work. L 88 5/8" 93 1/8" Mounting hardware supplied by others. J-BOX (BY OTHERS) MAX. 78 3/4" T5 L 35 1/8" TO 93 1/8" MAX. 78 3/4" MAX. 78 3/4" L 35 1/8" TO 93 1/8" L 35 1/8" TO 93 1/8" LED ARRAY OFFSET 4 9/16" ACCESSORY TUBO 150 Angular cable suspension (max. 45 ) TYPE anti-slip protection (per cover) FIXTURE LENGTH CALCULATION L total = L channel + 5/8 CODE T5 LAMP MAX. 78 3/4

6 LED LAMP MAX. 78 3/4 1 SURFACE VERSION Pull on 2 the side and remove cover 3 Optional T5 VERSION Connect power input and grounding bracket to inset 9

7 Testing the current: Max. 0,5 ohm resistance! Insert Bulbs The bulbs and light fittings become hot. Please turn off the power and allow the system to cool down before replacing the lamps or adjusting the lights LED VERSION Connect power input and grounding bracket to inset 18 Please do not touch the LEDs! The electrostatic discharge could damage them. Wear ESD protective clothing Testing the current: Max. 0,5 ohm resistance! 21 22

8 23 24 Optional 25 SUSPENDED VERSION Insert bracket into junction box Junction box supplied by others 26 Screw bracket to junction box 27 Thread lamp cable up 28 through cover plate Thread lamp cable through bracket Lamp cable Cover plate Bracket Lamp cable Screw on strain relief 31 Cover plate clicks onto bracket via springs 32 Springs Bracket Cover plate 33 Junction box (supplied by others) Strain relief Power feed Bracket Cover plate Lamp cable Make sure all components are grounded! 34 MOUNTING THE SUSPENSION 35 36a Optional Maximum load: 18 lbs per rope

9 36b Different views of the suspension T5 VERSION Connect power input and grounding bracket to inset Pull out the fixture sides and put on cover Insert Bulbs The bulbs and light fittings become hot. Please turn off the power and allow the system to cool down before replacing the lamps or adjusting the lights LED VERSION Connect power input and grounding bracket to inset

10 49 Please do not touch the LEDs! The electrostatic 50 discharge could damage them. Wear ESD protective clothing. 51 Testing the current: Max. 0,5 ohm resistance! 52 Pull out the fixture sides and put on cover FOR LENGHTS LONGER THAN

11 63 64 OPTIONAL ANGLE SUPSENSION SET When mounting at an angle of up to 45, please consult factory for information on antislip protection and longer suspension cables. 65 Anti-slip protection 0 to max. 45 L L x 2 Installation and commissioning may only be performed by authorized and qualified personnel, taking into consideration this Installation Instructions and any standards and regulations applicable to the respective area of application. The electrical, mechanical and thermal suitability of the lamp for the intended area of application must be ensured and the secure fastening of the lamp after its installation must be controlled. Turn off supply voltage before replacing any illuminants as well as before performing any other works on the lamp (e.g. cleaning) and wait until lamp and illuminant have completely cooled off. Please refer to the installation notes of the illuminant manufacturer when inserting, replacing and operating illuminants. Use a soft, damp cloth to clean the lamp. To clean plastic components and reflectors, a standard ph neutral, alcohol-free, nonabrasive cleaning agent may also be used. Keep these installation instructions in a safe place as reference for any future maintenance works. Never cover the lamp with heat-insulated covers or similar materials. The lamp is not suitable for outdoor use. Recessed profiles should only be installed by instructed professionals (for plasterboard works). In order to ensure the performance of T5 fluorescents, see lamp manufacturer manual for required run time. Please do not touch the LEDs! The electrostatic discharge could damage damage them. Wear ESD protective clothing. IP20 Covered Suitable for installation on ordinary combustible material! We reserve the right to change our products at any time. Current information is available at