Table of Contents MicroAir Series...-9 Technical and Operating Data.... How to Order.... Valve on ndividual Base... 5 Manifold Assemblies... 6 End Plate Kits... 7 Blank Station Plate Kit.... 7 Blocking Disc Kit... 7 Base Assemblies.... 7 Flexiblok Manifold Kits... 7 Speed Control Kit... 7 Solenoid Capsule Assemblies.... 7 Plug Connector... 7 Service Kits and Parts....8-9 Numatics 009 ev. /09
MicroAir Series (B) single solenoid position -way (B) (B)(A) 5 (EB)(P)(EA) (A) double solenoid position -way open center (B)(A) (A) double solenoid position -way (B) (B)(A) 5 (EB)(P)(EA) (A) double solenoid position -way closed center (B) (B)(A) (A) 5 Ported, and position, -way, Spool & Sleeve Cv: 0. Direct solenoid actuated Plug-in solenoid with plug-in connector and LED Unlubricated or lubricated service ntegral speed control available Multi-purpose 5 (EB)(P)(EA) 5 (EB)(P)(EA) double solenoid, spring centered position -way pressure center 5 Technical Data VALVE DATA ENGLSH METC Cv /8 = 0. 0- = 0. /8 = 0. M5 = 0. Flow capacity Operating Pressure ange 6 SCFM 6 SCFM 8N/m 8N/m Upstream pressure to atmosphere @80 PSG 6 bar upstream/5 bar downstream 8 HG. Vacuum to 50 PSG Vacuum to 0 Bar Temperature ange (ambient) -0 F to +5 F - C to +6 C Operating Data ALL SOLENODS AE CONTNUOUS DUTY ATED VDC VDC Power (Watts) Holding Current (Amps).8 0.6.8 0.08 ESPONSE TME N SECONDS ENEGZE DE-ENEGZE ENEGZE DE-ENEGZE -Position, Single, Spring eturn 0.0 0.08 0.0 0.08 -Position, Double, Detented 0.0 N/A 0.0 N/A -Position, Spring Centered 0.0 0.08 0.0 0.08
MicroAir Series How to Order Valves M0 SA 6 M 0 000 6 Valve Series & Port Size M0*= 0- M = /8 *Valve unit only. Valve Type SA = Single Direct Solenoid, Spring eturn w/flush Non-Locking Manual Override SS = Double Direct Solenoid w/flush Non-Locking Manual Override 00 = Manifold Block w/o Valve Function = Position -Way (5/) 5 = Position -Way (5/), Open Center, Dual Pressure 6 = Position -Way (5/), Blocked Center 7 = Position -Way Pressure Center 0 = Manifold Block w/o Valve P = Manifold Block w/ Blank Station Plate Voltage 60 = VDC 6 = VDC Options 000 = No options Port Type 0 = NPTF or UNF Pressure Ports or Valve Unit w/o Mounting G = SO8/-G Pressure Ports M = M5 Wiring Option M = Plug-n, w/ Light, VDC Mounting 00 =Valve Unit, w/o Mounting 0 =Valve Unit, Speed Control, w/o Mounting = Manifold Block, Side Cylinder Ports = Manifold Block, Side Cylinder Ports, Speed Control = Base, ndividual Exhaust, Side Cylinder Ports 6 = Base, ndividual Exhaust, Side Cylinder Ports, Speed Control Manifold Assembly AK 0 5 E 0000 N STD Electrical/Electronics Type & Location 0 =Standard Valve Line 5 = MicroAir Series Number of Valve Stations A = E = 5 = 9 B = F = 6 J = 0 C = G = 7 K = D = H = 8 L = Options STD = Standard Port Type N = NPTF Pressure Ports G = SO8/-G Pressure Ports End Plate Port Type 0 = /8 for #0- UNF or M5 Manifold Blocks = /8 for /8 Manifold Blocks Note: All Manifold Blocks in a Manifold Assembly must have the same port size. Example Order: List in order left to right facing cylinder ports Station Station Blocking Plug: AK05B00000NSTD M0SAM00006 M0SSM00006 9-66 (install in P gallery) ASSEMBLED
Valve on ndividual Base, 0- UNF-B MicroAir Series A B C C DAMETE MOUNTNG HOLE () E F D G C H Q 5 N O P 0- UNF-B K J SNGLE Dimensions top dimensions = inches and bottom dimensions (in parenthesis) = millimeters M L DOUBLE SOLENOD -POSTON DOUBLE SOLENOD -POSTON A B C D E F G H J K L M N O P Q.0 (0.5) 0.60 (5.) 0.0 (5.).00 (5.) 0.50 (.7) 0.8 (9.7) 0.76 (9.) 0.65 (6.5) 0.0 (0.).0 (5.).7 (69.).0 (0.).5 (05.) 0.6 (.) 0. (7.9) 0.60 (5.). (.0) Valve on ndividual Base, /8 NPTF B A DAMETE MOUNTNG HOLE () 0.0 E F D G C H Q 5 P O N /8 NPTF O (G) TAP POTS (5) K J SNGLE Dimensions top dimensions = inches and bottom dimensions (in parenthesis) = millimeters M L DOUBLE SOLENOD -POSTON DOUBLE SOLENOD -POSTON A B C D E F G H J K L M N O P Q.75 (.5) 0.88 (.) 0.8 (7.).00 (5.) 0.50 (.7) 0.0 (0.) 0.80 (0.).00 (5.) 0.56 (.).0 (5.).88 (7.).0 (0.).5 (05.) 0.8 (7.) 0.75 (9.).0 (6.).66 (.) 5
MicroAir Series 0- Manifold Assembly A -POSTON B POSTON D C E G F DAMETE MOUNTNG HOLES () 0- =.5 NCHES (.8mm) H J SLOW L K /5 S T U V W M O N P 0- UNF POTS (/8 NPTF) TYPCAL Q O /8 NPTF Manifold Assembly A -POSTON B POSTON F F G DAMETE MOUNTNG HOLES () /8 = 0.0 NCHES (5.mm) H SLOW U Dimensions top dimensions = inches bottom dimensions (in parenthesis) = millimeters POT SZE K J L N N M /8 NPTF /8 NPTF A B C D E F G H J K L M N O P /5 Q S T 0-. (05.).0 (0.).0 (5.).6 (7.) 0.7 (8.0) 0.8 (.) 0.6 (.7) 0.80 (0.).6 (.7).8 (7.) 0. (5.) 0.67 (7.0) 0.0 (7.6) 0.09 (.) /8. (05.).0 (0.).0 (5.). (6.) 0.7 (8.0) 0.7 (.9) 0.88 (.).75 (.5).89 (7.) 0.9 (7.) 0.95 (.) 0. (7.9) 0. (7.9) 0.6 (6.0) POT SZE O P Q S T U V W 0-0.6 (6.0) 0. (7.9) 0.09 (.) 0.5 (.) 0. (.) 0.6 (5.5) 0.88 (.).78 (5.).99 (50.5) /8 0.09 (.) 0.05 (.) 0.5 (.7) 0.9 (.9).5 (.8).6 (5.9).7 (60.) 6
MicroAir Series End Plate Kits #0- UNF-B 9-6 /8 NPTF 9-6 M5 9-6 G /8 9-65 EQ D PAT NAME 0- UNF-B Seal 6-07 ight End Plate 0- Left end Plate Screws 0-5 7-56 PAT /8 NPTF G /8 6-07 6-07 0-6 0-8 0-7 0-9 7-56 7-56 G M5 6-07 0-6 0-7 7-56 Blank Station Plate Kit 9-57 Blocking Disc Kit 9-66 () Screw 7-58 Gasket -08 Base Assemblies Flexiblok Manifold Kits Seal # 6-07 Stud # 7-58 5 5 #0- UNF-B /8 NPTF /8 NPTF / G /8 BASE TYPE #0- UNF-B Side Ports /8 NPTF Side Ports M5 Side Ports G /8 Side Ports #0- UNF-B / M5 PAT 0-6 0-6 0-65 0-65 MANFOLD TYPE PAT #0- UNF-B Cylinder Ports 9-58 /8 NPTF Cylinder Ports M5 Cylinder Ports 9-59 9-60 G /8 Cylinder Ports 9-6 Solenoid Capsule Assemblies Speed Control Kit 9-66 VALVE FUNCTON / END VDC VDC -position / 6-0 6-0 -position 6-58 6-59 -position 6-0 6-0 Plug Connector LEAD LENGTH With " Leads With 8" Leads With 0" Leads Wire Gauge PAT 0-0-76 0-86 AWG Housing 0-8 Terminal 0-85 ncludes gasket #-05 and screw assembly #7-580. Adds 0." (5. mm) to height. Plug connector is not included with solenoid assemblies or valve models. Must order separately. 7
Service Kits and Parts Kit No. M-K* (For Models M0SA, M0SS) MicroAir Series Parts List DET. EQ D PAT NAME PAT Valve Body (not sold separately) Sleeve Assembly w/seals 09-8 * 6 Seals 6-5 * 6 7 8 9 * 0 * Bumper -7 * Spring 5-98 * Nameplate Spacer Solenoid Capsule Assembly Screw Spring Cover Seal Gasket Screw -868 6-0 See p. 7 7-576 0-08 6-6 -05 7-575 Kit No. M-K* (For Models M0SS, MSS) Parts List DET. EQ D PAT NAME PAT Valve Body (not sold separately) Sleeve Assembly w/seals 09-8 * 6 5 * 6 7 * 8 * Bumper -7 9 * Gasket -05 0 Seals Nameplate Detented Assembly Solenoid Capsule Assembly Seal Screw 6- -868 0- See p. 7 7-6 7-575 *ndicates parts included in service kit. Spool and sleeve assemblies are precision matched set; assemblies include (6) #6- seals: spools are not interchangeable. 8
Service Kits and Parts Kit No. M-K* (For Models M0SS5, MSS5) MicroAir Series Parts List DET. EQ D PAT NAME PAT Valve Body (not sold separately) Sleeve Assembly w/seals 09-8 * 6 Seals 6-5 * 6 7 * 8 9 * Nameplate Bumper Solenoid Capsule () Seal Adaptor Spring etainer -868-7 See p. 7 6-6 9-55 6-07 0 * Spacer 6-05 * Spring 5-0 * Spring etainer 6-06 * Gasket -05 5 Screw 7-575 Solenoid Capsule () See p. 7 Kit No. M-K* (For Models M0SS6, MSS6) Parts List DET. EQ D PAT NAME PAT Valve Body (not sold separately) Sleeve Assembly w/seals 09-85 * 6 Seals 6-5 * 6 7 * 8 9 * Nameplate Bumper Solenoid Capsule () Seal Adaptor Spring etainer -868-7 See p. 7 6-6 9-55 6-07 0 * Spacer 6-05 * Spring 5-0 * Spring etainer 6-06 * Gasket -05 5 Screw 7-575 Solenoid Capsule () See p. 7 *ndicates parts included in service kit. Spool and sleeve assemblies are precision matched set; assemblies include (6) #6- seals: spools are not interchangeable. 9
WOLD HEADQUATES USA Numatics, ncorporated 680 Dylan Drive Novi, Michigan 877 P: -888-Numatics -888-686-8 Canada Numatics, Ltd P: 59-5-777 Mexico Numatics de Mexico S.A. de C.V. P: 5--8-676 For a comprehensive listing of all Numatics production and distribution facilities worldwide, visit: www.numatics.com Numatics nc. 008 LT-GCatalog.0 0M-TG-/08