FDH Series Compact Finger Slides
|
|
- Kenneth McDaniel
- 7 years ago
- Views:
Transcription
1 FDH Series Compact Finger Slides Catalog #FDH- Prices effective September 1, 11 Cylinder block- Clear anodized aluminum Top Toolplate and Front Toolbar Clear anodized aluminum Tapped mounting holes ( for strokes 5 thru mm.) ( for strokes thru mm) mm keyhole sensor mounting slots (2 each side) Tapped mounting holes () Carriage bearing Extend Port Tapped thru mounting hole (3 places) C bored for SHCS - both sides Extend Port 1 each side Retract Port 1 each side Retract Port Repairable, built-in air cylinder Rear tapped mtg. holes () Stainless steel rod coupler nuts (2) Available in 3 s, 1 & mm Standard s 5,, 15,,,,,, mm Magnetic piston is standard feature for position sensing Now get directly interchangeable, universal mount, compact pneumatic slides! Check list of Competitive Advantages of FDH Series Finger Slides Longer strokes for all models. New round profi le sensors feature surge suppression, polarity protection, LED indicator, and extremely fast switching speeds. Rubber bumpers provide cushioned stop. Specifi cations and prices subject to change without notice or incurring obligation Check list of Standard Features Four mm keyhole sensor mounting slots, two on each side. Clear anodized toolbar and toolplate. Stainless steel coupler nuts. Versatile load attachment Tapped holes on top toolplate: on strokes 5 thru mm. on strokes thru mm. Tapped holes on front toolbar (). Easy, convenient slide mounting Side thru holes with C bores in body. Side tapped mounting holes. Bottom tapped mounting holes. Rear tapped mounting holes. Toolbars are slightly narrower than body, allowing side mounting with clearance between toolbar and mounting surface. Ports accessed on either side and rear. Fabco-Air, Inc. 371 N.E. 9th Avenue Gainesville, FL Telephone (352) Fax (352) service@fabco-air.com Web Site
2 FDH Series Finger Slides How to Order Model Number Code FDH x Series 1) Specify FDH 2) Specify the bore 3) Specify the stroke Size (mm) 1 Lengths (mm) / List Prices 5 15 $18.7 $192. $19.9 $1. $7. $211.5 $221.7 $1.9 $ Seal Kits / Prices Part No. Price FDH-SK $. FDH1-SK 2.8 FDH-SK 3.35 Note: Order sensors separately from page 3. Specifications Cap Screws attach Top Toolplate to Carriage Bearing Top Toolplate Bearing track mounting slot Front Toolbar Bearing track Set screw plugs supplied for unused ports () Carriage bearing Specifications Size (mm) 1 Bearing Track Width (mm) Minimum Operating Pressure psi psi psi.7 bar.7 bar.7 bar Maximum Operating Pressure psi psi psi 9. bar 9. bar 9. bar Temperature Range - C to 7 C (1 F to 158 F) Max. Recommended Speed mm/sec. dependent on load values shown on pages & 7 Lubrication Cylinder & Bearing: Factory Pre-lubed / Regular Lubrication Recommended Cushion Rubber Bumpers both ends Cylinder seals Buna-N Theoretical Force Output Guide (Piston) Diameter (mm) 1 Rod Diameter (mm) 8 Extend Piston Area (in 2 ) Retract Piston Area (in 2 )..2.1 Weights (lbs) Model (mm) 5 15 FDH FDH FDH Specifi cations subject and prices to change subject without to change notice without or incurring notice obligation or incurring obligation Page
3 Magnetically Actuated Sensors Two mm keyhole slots each side for mounting sensors Round Profile Sensors feature surge suppression, polarity protection, LED indicator, and extremely fast switching speeds. They slide into mating mm keyhole slots on either side of the cylinder block and are easily positioned and locked in place with a set screw. They are offered in two styles: a quick connect style with a inch pigtail and male connector, or a prewired style with a 9 foot lead. Female Cordsets are available in 3 pin confi gurations in 1, 2 and 5 meter lengths. 3-pin, quick connect style sensor shown Order sensors and cordsets separately from the tables below. Sensor Dimensions (mm unless noted) LED Indicator in. 8mm Male Quick Connect 13. to center of Sensing Area for Reed Style 7. to center of Sensing Area for Electronic Style Prewired sensor shown with 9 ft. lead 3 pin cordset shown with sensor pigtail ø3.8.5 Reed Style 5.8 Electronic Style LED Indicator 9 ft. All sensors feature surge supression, polarity protection, LED indicator, and extremely fast switching speeds. 8mm Female Cordsets for Quick Connect Sensors Cordset Description 1 meter, 3-pin 2 meters, 3-Pin 5 meters, 3-Pin Part No. CFC-1M CFC-2M CFC-5M List Prices $ Magnetic Sensors Electrical Characteristics Sensor Type Function Switching Power Reed Switch for PLC s w/led (current limiting) Electronic LED and Sourcing Electronic LED and SInking SPST Normally Open PNP Normally Open NPN Normally Open Switching Voltage 5-1V AC/DC / Hz - VDC - VDC Switching Current. Amp max.5 Amp min..2 Amp max..2 Amp max. Watts max. Watts max. Watts max. Switching Speed.5 ms operate.1 ms release 1.5μs operate.5μs release 1.5μs operate.5μs release Voltage Drop 2.5 Volts 1.5 Volts 1.5 Volts Part Numbers and Prices Prewired 9 ft. Price Quick Connect Price Part No. Part No. 9C9--2 9C9--2 $. Requires 3 pin cordset $27. 9C C Requires 3 pin cordset 33. 9C C Requires 3 pin 33. cordset Page 3 Specifi cations Specifi and cations prices subject to change without notice or incurring obligation
4 FDH Series Finger Slides Construction Quick Reference to Components No. Description Material 1 Hex socket head cap screw stainless steel 2 Hex socket head cap screw stainless steel 3 Top toolplate anodized aluminum Bearing track precision bearing guide element 5 Carriage bearing recirculating ball bearing Piston rod stainless steel 7 Retainer ring plated carbon spring steel 8 Rod coupler nuts stainless steel 9 Front toolbar anodized aluminum Tapped mounting holes w/counterbore for thru bolt 11 Rod end cap anodized aluminum 12 Plug stainless steel No. Description Material 13 Cap seal Buna-N 1 Cushion/Bumper Urethane 15 Magnet for position sensors plated neodymium 1 Piston seal Buna-N 17 Piston aluminum 18 Magnet retainer 19 End cap anodized aluminum Retract port 21 Extend port 22 Cylinder block anodized aluminum Tapped mounting holes 2 Rod seal Buna-N Specifi cations subject to change without notice or incurring obligation Page -1-
5 Construction and Dimensions 5 thru mm strokes LL Q Tapped mounting holes (K3) M N T Tapped mtg. hole (3) Clearance for TC SHCS w/c'bore K K1 K2 WW Guide rail width R Port () M5 X.8 B R1 J Y2 Z 3 Y H Y1 Z 2 Y3 U R2 F GG Y Z 1 A S Thru tapped mtg. hole () G D + C + Z Tapped mtg. hole () Note: Ports (M5x.8) at Y dim. are plugged and sealed with set screws which can be removed and installed in the end ports. Z 1 Ref. SS V2 V V1 + W Tapped mtg. hole () mm 1mm mm A 32 B C D F G H J 27 3 K M N Q by depth M x.7-7 M x.7-7 M5 x R R R S M x.7 M x.7 M5 x.8 SS mm 1mm mm T M5 x.8 M5 X.8 M X 1. TC M M M5 U V V V W by depth M x.7 - M x.7 - M5 x.8-8 WW Y Y Y2 31 Y Y Z by depth M x.7 - M x.7 - M5 x.8-5 Z Z Z mm 1 mm mm 5 15 GG K1 K2 K3 LL GG K1 K2 K3 LL GG 7 7 K1 K2 K3 LL Page 5 Specifi cations subject to change without notice or incurring obligation
6 Page Specifi cations subject to change without notice or incurring obligation Vertical Mounting FDH Series Finger Slides Load Overhung Load Distance -- 1 Speed mm/sec Overhung Load Distance in mm Maximum Safe Load in kg for mm stroke and shorter Horizontal Mounting Lh Load Lv Lh Load Lv 1 Speed mm/sec LV Distance in mm Distance Lh in mm Maximum Safe Load in kg for mm stroke and shorter
7 Safe Loading Data Pitch, Yaw, Roll Moments A Yaw Moment ft-lbs = N-m x.738 Safe Dynamic Carriage Loading A of Carriage Slide stroke fully extended Pitch Moment of Carriage Roll Moment of Carriage A A / Range (5-mm strokes) 1 (5-mm strokes) (5-mm strokes) Pitch Moment (N-m) Yaw Moment (N-m) Roll Moment (N-m) Slide stroke fully extended Approximate deflection of finger slide at A as a result of moment loads FDH FDH1 FDH Pitch moment (N-m) Pitch moment (N-m) Pitch moment (N-m) FDH.3.,.2 15,.15, 5,.1 15,.5 5,, 15, 5, Yaw moment (N-m) FDH ,.8 15,. 5, Yaw moment (N-m) FDH..2,, 15,.15 15, 5, 5, Yaw moment (N-m) FDH Roll moment (N-m) FDH Roll moment (N-m) FDH Roll moment (N-m) -5- Page 7 Specifi cations subject to change without notice or incurring obligation
8 Fabco-Air Product Catalog Library NEW PRODUCTS Check out these new product lines today! Cylinders, Valves and Accessories Catalog #CV9 Pancake II Air Cylinders Catalog Pan2-2 Square Pancake II Air Cylinders Catalog # SqPan2 ISO 31 Cylinders Catalog # FAQR-9 TwinRod, Non-Rotating Air Cylinders - Catalog # FDF-9 and Catalog # FDXS-9 High hclosing Force Angular Grippers Catalog # FKHC- Multi-Power Air Presses Catalog # FP1 Linear Slides - Families Pneumatic Grippers, Catalog # LS-3 Parallel Jaw and Angular Motion Catalog # GR-8 ISO 32 Cylinders Catalog # FAE-9 Rotary Actuators, Pneumatic Catalog # FRA.C-9 Angular Grippers Catalog # FKA-9 NFPA Interchangeable Air Cylinders Catalog # NF- Global Series Metric Air Cylinders - Catalog # GC-15 Stopper Cylinders Catalog # ST-SC Toggle Type Angular Grippers- Catalog # FKHT- Air Table Slides Catalog # FGXS- Wide & Narrow Parallel Grippers - Catalogs # FKHZ- & FKHQ- Modular Air Preparation System - FRLs Catalog # FRL- Stainless Steel Body Air Cylinders Catalog # SSB-3 Swing Clamps Catalog # SC-DB Guided Motion Air Cylinders Catalog # FGM- Pneumatic & Hydraulic Swing Clamps Catalog # FML.H Wide Opening Parallel Grippers Catalog # FKHL- Fabco-Air, Inc. 371 N.E. 9th Avenue Gainesville, FL Telephone (352) Fax (352) service@fabco-air.com Web Site -5-
IMPORTANT DOCUMENTATION DO NOT DISCARD!
PART NO.: 6441-263C SERIES GRT 3 JAW PARALLEL GRIPPERS INFORMATION SHEET IMPORTANT DOCUMENTATION DO NOT DISCARD! Use this information sheet to assist with gripper installation and setup. File with maintenance
More informationSensors. Sensors. All Cylinders. Specifications. Features: Features Type REED HALL EFFECT NPN or PNP. Ø8mm - 125mm
Specifications Features Type REED HALL EFFECT NPN or PNP Applicable Series Configurations Construction Materials Body Mounting Bracket Cable Characteristics Operating Temperature Accuracy All Cylinders
More informationPneumatic Grippers Parallel and Angular Grippers. Catalog 1900-2/US
Pneumatic Grippers Parallel and Angular Grippers Catalog 19-2/US Catalog 19-2/US OContents GPR Series Rotary vane driven design GPR GPCR Series P5G-HPM(C) Series P5G-HP Series GPT Series P5G-AP Series
More informationLinear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors
20000 Linear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 823 Notes 824 Technical
More informationHOW TO ORDER SAFETY PRODUCTS/SAFETY CONTROL SYSTEMS ELECTRICAL SAFETY CONTROLS
HOW TO ORDER SAFETY PRODUCTS/SAFETY CONTROL SYSTEMS PNEUMATIC SAFETY CONTROLS BASIC CONTROLS SC3000 - SELF CONTAINED 2 HAND CONTROL - STAND ALONE MODEL SC3300 - SELF CONTAINED 2 HAND CONTROL - PRESS READY
More informationDPE Parallel Gripper- Electric Gripper Series
1.8 DPE Parallel Gripper- Electric Gripper Series Electrically Actuated 24 VDC, 4-wire input: power, ground, open & closed signals. 100% duty cycle for high throughput. Light Switch Simplicity Plug and
More informationExtruded Body Cylinders, ISO 6431, ISO 15552 compliant Series 62
1 ISO / VDMA Cylinders NORTH AMERICAN CYLINDER & ACTUATOR CATALOG > Release 8.5 Extruded Body Cylinders, ISO 6431, ISO 15552 compliant Series 62 Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80,
More informationCylinders Series 40. Double acting, cushioned, magnetic ø160-200 - 250 (DIN/ISO 6431)
Cylinders Series 40 Double acting, cushioned, magnetic ø60-200 - 250 (DIN/ISO 643)»»» DIN/ISO 643 VDMA 24562 Rolled stainless steel rod Adjustable cushioning The cylinders Series 40 with diameters 60,
More informationLINEAR MOTION CONTROL
LINEAR MOTION CONTROL Technical Data Sheet Static Locks RLSS Series Nexen s new generation of linear holding/locking devices take rod locking technology to the next level. With superior performance, these
More informationSMA Aluminum Cylinders
SMA Aluminum Cylinders PNEUMATIC TO 200 PSI HYDRAULIC 250 TO 400 PSI Non shock /8,, 2, 3 BORE SPACE SAVING AND CONVENTIONAL DESIGNS REPAIRABLE Very high quality Pancake type cylinders with all of the engineering
More informationProximity Switches RS (Reed Switch)
Proximity Switches RS (Reed Switch) General Pneumatic systems can often be combined with electric control circuits. The position of the piston in the cylinder can then be sensed by means of a proximity
More informationMini slide, Series MSN narrow version Ø 6-16 mm double-acting with magnetic piston cushioning: elastic with integrated ball rail guide
Piston rod cylinder uide cylinders ini slide, Series SN 1 Ambient temperature min./max. +0 C / +60 C edium Compressed air ax. particle size 5 µm Oil content of compressed air 0 mg/m³ - 1 mg/m³ Pressure
More information240% 19% reduced. Compact Slide. New. New. Improved by up to. With new high rigidity linear guide. 369g. Series MXH CAT.ES20-218A.
Compact Slide New ø, ø, ø, ø RoHS Allowable moment Improved by up to 2% With new high rigidity linear guide Allowable moment improvement illustrated below Allowable moment (N m). F Pitch moment Mp Yaw
More informationT-Series Precision Linear Actuators Installation and Service Manual DW110353GB-1018 - EDITION 5. www.thomsonlinear.com
T-Series Precision Linear Actuators Installation and Service Manual DW110353GB-1018 - EDITION 5 www.thomsonlinear.com Version History Edition Number Edition Date Reason for Revision 1 2004 First edition
More informationRotary actuators Rotary wing drives Series RAK. Brochure
Brochure 2 Rotary wing drives, angle of rotation: 30-270 Rotary wing drive, double-acting axis geometry: single 4 Rotary wing drives, angle of rotation: 90-270 Rotary wing drive, double-acting axis geometry:
More informationLaserlyte-Flex Alignment System
Laserlyte-Flex Alignment System LaserLyte-Flex The LaserLyte-Flex Alignment System is a unique, interchangeable, low cost plug and play laser system. Designed specifically for aligning and positioning
More informationPREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS
SYSTEM COMPONENTS PREASSEMBLED ELEMENTS FOR FIFTING AND SLIDING DOORS s r ood gn i d i l s dna gn i t f i f r o f s t neme l e de l bme s s ae r P PREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS These
More informationLinear drives DGC Key features
Linear drives DGC Linear drives DGC Key features General information Compact fitting length relative to stroke Loads and devices can be directly mounted on the slide Three types of cushioning available:
More informationLinear Systems. Main Catalog
Linear Systems Main Catalog MOVITEC Linear Systems The Italian company Impex Tecniche Lineari designs and manufactures a wide range of products under the brand name MOVITEC: Electromechanical and pneumatic
More informationR310EN 2225 (2011.04) The Drive & Control Company
Ball Rail Systems Resist NRII R310EN 5 (011.04) he Drive & Control Company R310EN 5 (011.04) Ball Rail Systems Resist NR II Bosch Rexroth AG 3 Ball Rail Systems Resist NRII General Product Description
More informationProfile rail guides LLR
Profile rail guides LLR Content The SKF brand now stands for more than ever before, and means more to you as a valued customer. While SKF maintains its leadership as the hallmark of quality bearings throughout
More informationUnited Kingdom Sweden Germany Switzerland USA, Canada and Mexico China Japan France Linear Units Y07 GB Asia Pacific Italy EU-200502-03 03JUL
Linear Units Linear Units Table of Contents Introduction... 5 Introduction... 5 How to Choose a Unit...6-7 Technical Introduction...8 - Linear Units with Ball Screw Drive and Ball Guide... 3 Introduction...
More information3 WAY (3/2) POPPET VALVES FOR AIR AND VACUUM SERVICE SOLENOID OR AIR ACTUATED BROCHURE N-223
3 WAY (3/2) POPPET VALVES FOR AIR AND VACUUM SERVICE SOLENOID OR AIR ACTUATED BROCHURE N-223 HERION S HIGH PERFORMANCE POPPET VALVES For those applications requiring high Cv, fast response times, large
More informationCatalog # SQ-PAN2. Square Pancake II Air Cylinders
atalog # SQ-PAN2 Prices effective September 1, 2011 Square Pancake II Air ylinders Square Pancake II ylinders Product Index Standard Series SS, SSR, SSX, SW, ST ow it works.....................................
More information550658 D. PARAMETER SPECIFICATION Measured Variable: Displacement
T E M P O S O N I C S L S E R I E S LH 550658 D P r o d u c t S p e c i f i c a t i o n s Temposonics L Series position sensors are available with analog outputs (voltage or current) or digital outputs
More informationCompact cylinder Double acting single rod type. SSD SSD-L (with switch) Double acting Compressed air 1.0. 1.6-10 to 60 (no freezing) Rc1/8 Rc1/4 Rc3/8
* U S 4 Specifications escriptions Bore size mm Actuation Working fluid ax. working pressure Pa in. working pressure Pa Withstanding pressure Pa Ambient temperature Port size Stroke length Rubber cushioned
More informationProportional pressure regulators VPPE
Proportional pressure regulators VPPE Proportional pressure regulators VPPE Product range overview Function Version Pneumatic connection Proportional pressure regulator Nominal size for pressurisation/
More informationOriginal & T Series 8 Bores, 1/2" 4"
Original & T Series 8 Bores, /2" 4" Section Index Page Features & Benefi ts....2 General, Standard Specifi cations....2 Construction Details....3,.4 How a Pancake is built Information....5,.6 How a Pancake
More informationSET-UP AND INSTALLATION FOR LEAD SCREW CARTRIDGE ASSEMBLY
SET-UP AND INSTALLATION FOR LEAD SCREW CARTRIDGE ASSEMBLY 82-13-1 O-Ring (Rear) The Lead Screw Assembly is shipped separately. Note: Install Electrical and Pneumatic Circuitry. Be Sure electrical and pneumatic
More informationCylinders DIN ISO 6431 and VDMA 24 562
Double acting Standard executions Version Shape of barrel Symbol Type MAGNETIC STANDARD AMA AMT 1 For the magnetic reed switches type ASV see from page 1.110.1. For coupling cylinders/reed swiches/brackets
More informationAPPLIED PNEUMATICS AND HYDRAULICS H TUTORIAL HYDRAULIC AND PNEUMATIC CYLINDERS. This work covers part of outcome 2 of the standard Edexcel module.
APPLIED PNEUMATICS AND HYDRAULICS H TUTORIAL HYDRAULIC AND PNEUMATIC CYLINDERS This work covers part of outcome 2 of the standard Edexcel module. The material needed for outcome 2 is very extensive so
More informationMPPM1606 MPPM2508 MPPM3210
MPPM 2-jaw parallel self-centering electric gripper Plug & play user friendly gripper. No electricity consumption when gripper is engaged. No programming required. Gripper retention guaranteed in event
More informationRM/55401/M, Roundline cylinder Magnetic piston, double acting
RM/550/M, Roundline cylinder > > Ø... 00 mm > > Clean line design > > ow friction, long life seals > > Standard magnetic piston for full control system versatility Technical features Medium: Compressed
More informationChar-Lynn Hydraulic Motor. Repair Information. 10 000 Series. October, 1997
Char-Lynn Hydraulic Motor October, 1997 Repair Information Geroler Motor Two Speed 001 27 Retainer inside bore of valve plate bearingless motors only 4 15 16 3 6 35 Parts Drawing 25 2 2 1 19 17 36 40 47
More informationSECTION G2: CABLE PROCESSOR MODULE MAINTENANCE
SECTION G2: CABLE PROCESSOR MODULE MAINTENANCE Cable Processor Module overview WARNING! When tipping the Cable Processor Module back, (after removing the toggle arm pin), use extreme caution not to drop
More informationMPLM1630 MPLM2535 MPLM3240
MPLM Self-centering 2-jaw electric parallel gripper with long stroke Plug & play user friendly gripper. No electricity consumption when gripper is engaged. No programming required. Gripper retention guaranteed
More informationUnit 24: Applications of Pneumatics and Hydraulics
Unit 24: Applications of Pneumatics and Hydraulics Unit code: J/601/1496 QCF level: 4 Credit value: 15 OUTCOME 2 TUTORIAL 2 HYDRAULIC AND PNEUMATIC CYLINDERS The material needed for outcome 2 is very extensive
More informationExperience In Motion. Valtek Spring Cylinder Linear Actuators
Experience In Motion Valtek Spring Cylinder Linear Actuators Valtek Spring Cylinder Linear Actuator Flowserve spring cylinder linear actuators are powerful, compact, high-performance pneumatic actuators
More informationRODLESS BAND CYLINDERS WITH CARRIER BRACKET-TYPE STB SERIES 446
RODESS AND CYINDERS WITH CARRIER RACKET-TYPE ST SERIES 446 OPERATING PRINCIPE Set in motion with pneumatic energy, the piston moves in an extruded alumunium tube containing a slot running the length of
More informationDirect Operated Regulator for 6.0 MPa (Relieving Type) How to Order. Body size 30 40
Direct Operated Regulator for (Relieving Type) Series Service life: 0 million cycles Using NSF-H-certified grease on the guide ring (sliding) part. Improved durability under a high environment with a polyurethane
More informationElectro-Pneumatic Bus Door Control Mechanism
Electro-Pneumatic Bus Door Control Mechanism Application and Feature 1. Pneumatic Door Mechanism actuates the open/close movements of bus door through two double acting cylinders and two linkages with
More information3 Port Solenoid Valve
Port Solenoid Valve Series V00 Rubber Seal Power consumption 0. W (with power saving circuit) VV0 VV00 V00 -V F VS temperature rises: C (with power saving circuit) Sonic conductance Series Standard Large
More informationCartridge Valves. Solenoid Valves. Vickers. Screw-in Cartridge Valves. Maximum Pressure 210 bar (3000 psi) Maximum Flow 227 l/min (60 USgpm)
Vickers Cartridge Valves Solenoid Valves Screw-in Cartridge Valves Maximum Pressure bar ( psi) Maximum Flow 7 l/min (6 USgpm) Rev /99 77 Introduction For over seventy years, Vickers has provided its customers
More informationMagnetic proximity switches
Magnetic proximity switches Magnetic proximity switches Overview Page 38 Functional principle and installation Page 39 Cylindrical designs Page 41 Rectangular designs Page 42 37 Kurzübersicht Magnetoresistive
More informationNorbro Series 40R Pneumatic Actuator Double Acting or Spring Return
Pneumatic Actuator Double Acting or Spring Return Since the mid-sixties the Norbro name has been recognised as the leading quarter turn actuator for industry. As proof of this, Norbro pneumatic actuators
More informationPosition Transducers with Restoring Spring 10, 25, 50, 75, 100 mm TR, TRS Series
Position Transducers with Restoring Spring 10, 25, 50, 75, 100 mm TR, TRS Series Special features long life 100 x 10 6 movements outstanding linearity up to ±0.075% choice of plug or cable connection DIN
More informationTable of Contents. Overview 1. Pump Disassembly 2. Control Disassembly / Reassembly 7. Pump Reassembly 13. Adjustment Procedures DR Control 19
Table of Contents Overview 1 Pump Disassembly 2 Control Disassembly / Reassembly 7 Pump Reassembly 13 Adjustment Procedures DR Control 19 Adjustment Procedures DRG Control 20 Adjustment Procedures DFR
More informationFluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TS
Fluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TS up to size 381; to PN 0.5; to T = 80 C 1. Description 1.1. General FSA fluid level gauges, FSK fluid level sensors and TS temperature
More informationPRESSURE REDUCING CONTROL VALVE
Schematics Throttles to reduce high upstream pressure to constant lower downstream pressure Low Flow By-Pass controls at low flows 4 PRESSURE REDUCING CONTROL VALVE with LOW FLOW BY-PASS FEATURE Main Line
More informationINSTALLATION AND OPERATING INSTRUCTIONS For Model GL1 Gate Locks
Securitron Magnalock Corp. www.securitron.com ASSA ABLOY, the global leader Tel 800.624.5625 techsupport@securitron.com in door opening solutions INSTALLATION AND OPERATING INSTRUCTIONS For Model GL1 Gate
More informationITT Industrial Products
ITT Industrial Products Providing custom industrial solutions to meet customers application needs globally. ITT Control Technologies GmbH under the ITT Enidine brand provides quality energy absorption
More informationRPE3-04. Functional Description HA 4014 10/2010. Directional Control Valves Solenoid Operated. Replaces HA 4014 12/2007
Directional Control Valves Solenoid Operated RPE3-04 Size D 04 (02) 320 bar (4600 PSI) 30 L/min(8.0 GPM) HA 4014 10/2010 Replaces HA 4014 12/2007 4/3-, 4/2- way directional control valves with solenoid
More informationSITEMA PowerStroke. Technical Information TI-P11. 1 Function. 2 Applications. Mould Closing Devices series FSK. Contents
English translation of German original Technical Information TI-P11 SITEMA PowerStroke Mould Closing Devices series FS drive system for powerful forces on a short stroke hydraulic actuation closing force
More informationWelcome to the World of Fluid Automation...
Directional Control Valves Fieldbus Electronics and I/O Poppet valves Stainless Steel FRL Series Line Mounted Valves Miniature Valves Directional Control Valves Accessories ISO Valves Welcome to the World
More informationTECHNICAL INFORMATION
TECHNICAL INFORMATION Models No. 2012NB Description 304mm (12") Automatic Thickness Planer CONCEPTION AND MAIN APPLICATIONS * Compact and light weight (27 Kg./59 lbs) automatic thickness planer for easier
More informationOperating Instructions Parts List Manual Scissor Lift Pallet Truck
Operating Instructions Parts List Manual Scissor Lift Pallet Truck Note: Operator MUST read and understand this operating instructions before use this Hand Scissor Lift. Thank you for using this hand scissors
More informationFisher 1052 Size 20 Diaphragm Rotary Actuator with F and G Mounting Adaptation
Instruction Manual 1052 Size 20 Actuator (F & G) Fisher 1052 Size 20 Diaphragm Rotary Actuator with F and G Mounting Adaptation Contents Introduction... 1 Scope of manual... 1 Description... 1 Specifications...
More informationMustang Series PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE. M115-2 (Globe) M1115-2 (Angle) Schematic. Standard Components
Schematic Throttles to reduce high upstream pressure to constant lower downstream pressure Throttles to maintain minimum upstream pressure PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE
More informationISO/VDMA Actuators. Engineering GREAT Solutions
ISO/VDMA Actuators Engineering GREAT Solutions 02 ISO/VDMA Actuators Contents 03 Introduction 04 ISO/VDMA Actuators 06 The ISO/VDMA Range 08 Industrial Options 10 Cleanline Options 12 IVAC innovation to
More informationElectric Lifting Cylinder TV / KV 5 XE Load up to 6.500 N
S+R S+R automation systems GmbH Electric Lifting Cylinder TV / KV 5 XE Load up to 6.500 N Lifting Moving Positioning Design and functuion An electric lifting cylinder is an electro-mechanical drive unit.
More informationTyco PremiAir Pneumatic Actuators
A comprehensive range of pneumatic actuators, conforming to EN ISO 5211, providing compact, reliable and economical powered operation for all types of quarter turn valves. Features Mounting to valve either
More informationPipe Cutting and Beveling Clamshells
Pipe Cutting and Beveling Clamshells Who We Are One Company, Total Support, Complete Solutions For more than a century, Hydratight has provided world-class bolted joint solutions and continues to set international
More informationAutomated Lubrication Systems Parts & Accessories
Automated Lubrication Systems Parts & Accessories (Truck and Trailer) Groeneveld USA, Inc. 2150 S. Central Expy. Suite 200 McKinney, TX 75070 Tel: 800.586.7283 Fax: 330.225.5213 Groeneveld USA, Inc. 2150
More informationSingle sub-base valve
solenoid valves Mini-valves 10 mm Electrical connection... Mounting... Port sizes... Rated temperature... Fluid... Working pressure... Nominal flow... Pneumatic connections Voltage... Power... NC poppet
More informationTaps up to M20 [3/4"] Multiple tap applications Taps up to 150 strokes per minute Taps millions of parts with little maintenance
www.danly.com TRUSTED SOLUTIONS AND INNOVATION Max Control TM Servo-Drive In-Die Tapping Units Taps up to M20 [3/4"] Multiple tap applications Taps up to 150 strokes per minute Taps millions of parts with
More informationVolkswagen Jetta, Golf, GTI 1999, 2000 Brake System 47 Brakes - Hydraulic Components (Page GR-47)
47 Brakes - Hydraulic Components (Page GR-47) FS III front brake calipers, servicing Front brake caliper piston, removing and installing FN 3 front brake calipers, servicing Front caliper piston, removing
More informationAIR-AIR PRESSURE MULTIPLIER (BOOSTER)
AIR-AIR PRESSURE MULTIPLIER (BOOSTER) The air-air pressure multiplier, or booster, is an automatic device that compresses air to give an outlet pressure that is double the inlet pressure. It is normally
More informationPiston rod cylinder Tie rod cylinder Series 167. Brochure
Brochure 2 Tie rod cylinder ISO 6431, Ports: G 1/8 - G 1/2 double-acting with magnetic piston cushioning: pneumatically, adjustable Piston rod: external thread 5 Tie rod cylinder ISO 6431, -53 double-acting
More informationTypical Aluminum GFM Mass Flow Meter
MASS FLOW METERS Design Features n Rigid metallic construction. n Maximum pressure of 1000 psig (70 bars). n Leak integrity 1 x 10-9 of helium. n NIST traceable certification. n Built-in tiltable LCD readout.
More informationFluid. Flu. Fluid Fluid. uid Power d Power P. Fluid Power P. Fluid Power. Fluid Power Power. d Power. Directional Cetop Valves DCV 03.
Catalogue Directional Cetop Valves DCV 03 Power Flu uid Power d Power P wer Power Power Power Power Power d Power Power Power ower Power Power wer Power Power P Power Power Powe d Power Power Power Power
More informationRotary Actuators, NAMUR interface VDI/VDE 3845 & ISO 5211 (ATEX certified) Series ARP
NORTH AMERICAN CYLINDER & ACTUATOR CATALOG > Release 8. Rotary Actuators and Grippers Rotary Actuators, NAMUR interface VDI/VDE 384 & ISO 211 (ATEX certified) Series ARP Model: Rack & Pinion - Rotational
More information3/2-way Solenoid Valve, direct-acting, NC or NO
3/2-way Solenoid Valve, direct-acting, NC or NO Electrical connection cable plug, Form A With or without manual override as standard Threaded port and sub-base s Impulse optional Type 6014 can be combined
More informationMODEL 565E - 22 TON AIR/HYDRAULIC AXLE JACK
1 565AKHU HYDRAULIC 1.22 O-RING - 2 REQUIRED UNIT 1.23 O-RING COMPLETE 1.24 TEFLON O-RING 2 REQUIRED 1.3 EXTENSION SCREW 1.3A SPRING PIN 1.4 SPRING SUPPORT 1.5 SCREW BUSHING 1.6 Y SHAPE SEAL RING 1.7 HEAD
More informationUnited Kingdom Sweden Germany Switzerland USA, Canada and Mexico China Japan France Linear Units Y07 GB Asia Pacific Italy EU-200502-03 03JUL
Linear Units Danaher Motion - Helping you build a better machine, faster Danaher Corporation combined over 30 industry-leading brands such as Kollmorgen, Thomson, Dover, Pacific Scientific, Portescap,
More informationCHIPPING HAMMERS. 9949 Tabor Place, Santa Fe Springs, California, CA 90670, U.S.A.
CHIPG HAMMERS Website: www.apt-tools.com e-mail: info@apt-tools.com TDS-1056 Rev A CHIPG HAMMERS TOOL MAINTENANCE & REPAIR INFORMATION FIELD OPERATION: Before use: 1. On 650 Series tools, tighten the handle
More informationC O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S
C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S January 2009 Issue 6 Valu Guide Brackets The Ultimate in Adjustability and Cost Savings Valu Guide brackets are part of a family
More informationSITEMA PowerStroke. Technical Information TI-P12. 1 Function. 2 Applications. Mould Closing Devices series FSKP. Contents
SITEMA PowerStroke FSP ocking, actuating and releasing by pneumatic pressure English translation of German original Technical Information TI-P1 SITEMA PowerStroke Mould Closing Devices series FSP drive
More informationCross-beam scanning system to detect slim objects. 100 mm 3.937 in
891 Object Area Sensor General terms and conditions... F-17 Related Information Glossary of terms... P.1359~ Sensor selection guide...p.831~ General precautions... P.1405 PHOTO PHOTO Conforming to EMC
More informationTurbine Flow Sensor Series VTR
Turbine Flow Sensor Series VTR SIKA Turbine Flow Sensor Series VTR Extra robust, impressively precise SIKA s VTR turbine flow sensor allows you to determine precisely, dependably and easily the flow rates
More informationMagnetic and Hydraulic-Magnetic Circuit Breaker 8340-G2...
Magnetic and Hydraulic-Magnetic Circuit Breaker 840-G2... Description Single, two and three pole magnetic circuit breakers with trip-free mechanism and push/pull on/off manual actuation. A choice of fast
More informationPneumatic. PXC Limit Switches. Authorised Distributor TTS Valve Technologies Sdn Bhd
Pneumatic PXC Limit Switches Limit Switches Series PXC High durability Very good repeat accuracy Design for process duty cycle Push-in or threaded connection Versatile and easily maintained Wide range
More informationPneumatic Cylinders. Composite, round line repairable and disposable, and NFPA square interchangeable
Composite, round line repairable and disposable, and NFPA square interchangeable Table of Contents Series 01 Micro-Air Cylinders 1/2, 3/4, & 1-1/8 Bore Sizes...9 Application Information, Features, Capabilities...9
More informationRexroth Linear Motion Technology
2 Bosch Rexroth Corp. Linear Motion and Assembly Technologies Ball Rail Systems R310A 2202 (2007.05) Rexroth Linear Motion Technology Ball Rail Systems Roller Rail Systems Linear Bushings and Shafts Standard
More informationFAG Hydraulic nuts. Technical Product Information
FAG Hydraulic nuts Technical Product Information Contents Application 2 Design 2 Design variants 3 Pressure generators, connectors 4 Dimension tables for FAG hydraulic nuts (metric) 6 Dimension tables
More informationWheel and Torque Specifications
Wheel and Torque Specifications Wheel and tire information Tires Goodyear Marathon 15 tires ST 225/75R 15 load range D 65 PSI Goodyear Marathon 14 tires ST 215/75R 14 load range C 50 PSI Michelin 16 tires
More informationMODEL T200-F18 MODEL T125-F18 Finish Nailers
P MODEL T200-F18 MODEL T125-F18 Finish Nailers IMPORTANT! DO NOT DESTROY It is the customer s responsibility to have all operators and service personnel read and understand this manual. OPERATING MANUAL
More informationI BEAM TRACK INSTALLATION
PDQ 0/700 FESTOON SYSTEM INSTALLATION AND MAINTENANCE INSTRUCTIONS INTRODUCTION The PDQ Festoon System was designed to run on one of three sizes of I-beams: S x., S8 x 8. and S x.. System trolleys must
More informationZ Type. F Type. S Type. Electric Grippers. Series LEH. 3-finger type is added! Can hold round work pieces.
Electric Grippers Easy setting 2 Data can be set with only 2 items: position and force. Data Axis 1 Step No. Posn 12. mm Force % Teaching box screen Drop prevention function is provided. (Self-lock mechanism
More informationSTAR Linear Bushings and Shafts Supplement RE 83 117/2001-08. Linear Motion and Assembly Technologies
STAR Linear Bushings and Shafts Supplement RE 83 117/2001-08 Linear Motion and Assembly Technologies STAR Linear Motion Technology Ball Rail Systems Standard Ball Rail Systems Ball Rail Systems with Aluminum
More informationColor Mark Sensor with Red or Green LED E3S-VS
Color Mark Sensor with Red or Green LED Rugged IP67 Color Mark Sensor 1 ms response time Detects a wide variety of color marks PNP or NPN output ls Light-on/ Dark-on operation, wire selectable Vertical
More informationTemposonics Magnetostrictive, Absolute, Non-contact Linear-Position Sensors
Temposonics Magnetostrictive, Absolute, Non-contact Linear-Position Sensors E-Series Model ER Analog and Start/Stop Outputs SENSORS Document Part Number: 550996 Revision E Data Sheet Model ER position
More informationTS93 EMR T/PT/TDE. Surface applied door closer
TS EMR T/PT/TDE Surface applied door closer Installation instructions: Pull side track mount door closer with smoke detector (EMR T) Push side track mount door closer with smoke detector (EMR PT) Double
More informationPiston Accumulators. SK Series. Accumulator Catalog. Piston Types. Description. Sealing Systems. End Cap. O-ring. Sealing System. Piston.
SK Series Piston Types TYPE 2 pplication: Low-friction design for higher piston speeds, slow movements without stick-slip effect and high number of actuations (millions). ctual cycles achieved will vary
More informationFixturing systems Fixturing systems for measurement technology
Fixturing systems Fixturing systems for measurement technology Innovations and new additions to range Sets Spannfix Eco complete set The set contains different supports, extension elements and stop units.
More informationNumber Wheeler P/N Description Set Rex P/N Notes 1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8)
1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8) 4 5 600130 Spring Washer (8mm) 4 6 600344 Roll Pin (M6x30) 4 7 600129 Socket Hd Cap Screw (M8x25) 4 8
More informationCentro-Matic Automatic Lubrication Systems System Controls
Selecting the right controls for your automated lubrication system is one of the last steps in the design process. Several different models may be chosen to control power-operated pumps, depending on the
More informationElectro-pneumatic control valves
Electropneumatic control valves 7 Miniature solenoid valves for alternating current Conform to the Low Voltage Directive or mounting on subbase or footprint in accordance with CNOMO recoendation E 066120N
More informationValve systems Base plates, according to standard ISO 5599-1. Brochure
ISO 5599-1 Brochure 2 ISO 5599-1 Single subbase Single subbase, thread connections on the side standard: ISO 5599-1 Frame size: ISO 1 - ISO 4 compressed air connection output: G 1/4 - G 1 Reversed pressure
More informationPVH131/141 Variable Displacement Piston Pump - 11 Design
Service Data Vickers Piston Pumps PVH131/141 Variable Displacement Piston Pump - 11 Design Revised 05/01/97 M-2209-S Maximum Adjustable Stop S Option 913341 Locknut Torque 25-50 N.m. (18-37 lb. ft.) Torque
More informationMÁQUINAS AGRÍCOLAS JACTO S.A. EDITION
AJ English version EDITION - 06/007 CODE - 9790 Parts catalog MÁQUINAS AGRÍCOLAS JACTO S.A. Rua Dr. Luiz Miranda, 650 7580-000 - Pompéia - SP - Brasil Tel.: +55 4 3405-00 - Fax: +55 4 345 306 E-mail: export@jacto.com.br
More information