LIQUIDTIGHT FITTINGS

ooper rouse-hinds LIQUITIGHT FITTINGS LiQuik Series no disassembly required! Liquidator Series Low Profile Series Zinc ie ast Series Non-Metallic Liquidtight Series

LIQUITIGHT FITTINGS LiQuik Series Liquidator Series Low Profi le Series Zinc ie ast Series Non-Metallic Series lass I, ivision 2 lass II, ivisions 1 & 2 lass III, ivisions 1 & 2 ooper rouse-hinds liquidtight product line offers high-quality, high-performance fi ttings. esigned to the toughest standards and integrating the latest technology, not only do you get a reliable and durable product, you also get one that reduces installation time and cost. Our versatile lines of liquidtight fi ttings are designed for a wide range of applications. hoose from our Liquidator, LiQuik, Zinc ie ast, Non-Metallic or Low Profi le liquidtight fi ttings. Whatever your needs are, you can be assured that our liquidtight fi ttings will stand up to the most demanding, wet or corrosive environments. pplications Typical applications for liquidtight conduit and liquidtight fi ttings include the wiring of machine tools, motors, transformers, food processing equipment, robotics, air conditioning units, illuminated store front signs and billboards, etc. The fl exible metallic conduit and fi ttings protect conductors from mechanical damage due to vibration and movement, and seal out cutting oils, coolants, water, dust, etc. pplications such as these can be found in, but are not limited to, industries such as: machine tool manufacturers electric power generating plants waste treatment facilities paint manufacturing facilities automobile manufacturing facilities aerospace industries ertifi cations & ompliances UL Listed liquidtight fl exible metal conduit fi ttings are suitable for use in the following hazardous locations under NE, lass I, ivision 2; lass II, ivision 1 and 2; and lass III, ivision 1 and 2, and are suitable for grounding in sizes through 1-1/4" under NE. UL Standards: 514, 467 cul Standard: 22.2 No. 18F Liquidtight Fittings Selection hart breweries food processing plants dairies pulp and paper mills petroleum refi neries chemical and petrochemical plants Liquidtight fittings come in a wide range of sizes in straight, 45 and 90 styles. They are available in steel, aluminum, zinc die cast or non-metallic with or without insulated throats and aluminum or copper grounding lugs. Features & enefi ts Product Features UL Listed, cul ertifi ed. Provides protection in wet locations. vailable in various confi gurations in various trade sizes and materials. Hex surfaces on gland nut and body. Thermoplastic elastomer sealing gasket effectively seals out water, oil, dust and dirt. Lock nut bites into box. upped long grounding ferrule is distortion-free. User enefi ts ssurance of safe and reliable performance. End user peace of mind. Meets NE and UL requirements for use in wet locations. Reduces downtime and replacement costs. omplete selection of styles and sizes. Easy selection from one source, saves time and money. Easy wrenching. Fast, easy installation results in labor savings. Eliminates leakage, potential downtime and replacement costs. Provides a reliable ground and safety of personnel and equipment. Won t vibrate loose. Provides excellent pullout strength, prevents conduit popout and provides grounding for safety of personnel and equipment. Family Material /Range onfigurations Typical pplications Liquidator Liquidator luminum LT-S LTK Low Profi le LTQ LiQuik LT Zinc ie ast LTNM Non-Metallic Malleable Iron opper-free luminum Steel/Malleable Iron * 90 LT-S available in only 6" Straight, 45, 90 Tough, industrial, corrosive for STNR PPLITIONS 4" Straight & 90 * Tough, industrial, corrosive applications where LUMINUM MTERIL PREFERRE Straight, 45, 90 Tough, industrial, corrosive applications with SPE RESTRITIONS Malleable Iron Straight Tough, industrial, corrosive applications needing NO ISSSEMLY INSTLLTIONS Zinc ie ast 4" Straight & 90 Tough, industrial, corrosive applications where ZIN IE ST MTERIL PREFERRE Nylon Straight & 90 Tough, industrial, corrosive for use with NON-METLLI TYPE LIQUITIGHT ONUIT 2 For More etails See page 4 & 5 See page 4 & 5 See page 8 See page 3 See page 6 See page 7

LIQUIK LIQUITIGHT FITTINGS No disassembly required! The ooper rouse-hinds LiQuik liquidtight fi ttings are quick and easy to install in just 2 steps, offering huge labor saving potential. vailable in trade sizes straight insulated or non-insulated. Traditional ssembly Installation 1. Slide nut over conduit. 4. Slide the conduit assembly inside body. New LiQuik ssembly Installation In Just 2 Steps: 1. Slide conduit inside the fully assembled connector. 2. Slide compression ring over conduit. 5. Slide compression nut and ring toward the connector. 3. Thread ferrule inside the conduit. 6. Tighten the nut. 2. Turn the connector assembly or the conduit until the ferrule threads engage the spirals in the conduit. The pins in the ferrule are locked inside the holes in the connector body, preventing the ferrule from turning. Tighten the nut against the connector. Ordering & imensional Information one! LiQuik Liquidtight Fittings malleable iron, straight, non-insulated atalog Number Trade KO imensions LTQ38 LTQ50 LTQ75 LTQ100 LTQ125 LTQ150 LTQ200 1 1 1 1 5/8" 1 5/8" 11/16" 1 1 13/16" 2 1/4" 2 7/16" LiQuik Liquidtight Fittings malleable iron, straight, insulated atalog Number LTQ38 LTQ50 LTQ75 LTQ100 LTQ125 LTQ150 LTQ200 Trade 1 KO 1 imensions 1 1 5/8" 1 11/16" 13/16" 13/16" 1 1 13/16" 2 1/4" 2 7/16" 3

LIQUITOR LIQUITIGHT FITTINGS Throat vailable (Malleable Iron Only) luminum or Malleable Iron luminum or Steel Lock Nut Polyethylene Split Sealing Ring Steel Grounding Ferrule Malleable Iron or luminum Gland Nut Ordering Information Thermoplastic Elastomer Sealing Gasket Straight onnectors Malleable Iron luminum onduit Non- Non- with luminum with luminum with opper Lug Non- luminum Non- with luminum 1 2 3 4" 5" 6" LT38 LT50 LT75 LT100 LT125 LT150 LT200 LT250 LT300 LT350 LT400 LT500 LT600 LT38 LT50 LT75 LT100 LT125 LT150 LT200 LT250 LT300 LT350 LT400 LT500 LT600 LT38G LT50G LT75G LT100G LT125G LT150G LT200G LT250G LT300G LT350G LT400G LT500G LT600G LT38G LT50G LT75G LT100G LT125G LT150G LT200G LT250G LT300G LT350G LT400G LT500G LT600G LT38G LT50G LT75G LT100G LT125G LT150G LT200G LT250G LT300G LT350G LT400G 250MM-#6 250MM-#6 LT38-S LT50-S LT75-S LT100-S LT125-S LT150-S LT200-S LT250-S LT300-S LT350-S LT400-S LT38G-S LT50G-S LT75G-S LT100G-S LT125G-S LT150G-S LT200G-S LT250G-S LT300G-S LT350G-S LT400G-S 45 ngle onnectors Malleable Iron luminum onduit Non- Non- with luminum with luminum with opper Lug Non- luminum 1 2 3 4" LT3845 LT5045 LT7545 LT10045 LT12545 LT15045 LT20045 LT25045 LT30045 LT35045 LT40045 LT3845 LT5045 LT7545 LT10045 LT12545 LT15045 LT20045 LT25045 LT30045 LT35045 LT40045 LT3845G LT5045G LT7545G LT10045G LT12545G LT15045G LT20045G LT25045G LT30045G LT35045G LT40045G LT3845G LT5045G LT7545G LT10045G LT12545G LT15045G LT20045G LT25045G LT30045G LT35045G LT40045G LT3845G LT5045G LT7545G LT10045G LT12545G LT15045G LT20045G LT25045G LT30045G LT35045G LT40045G 90 ngle onnectors Malleable Iron luminum onduit Non- Non- with luminum with luminum with opper Lug Non- luminum Non- with luminum 1 2 3 4" LT3890 LT5090 LT7590 LT10090 LT12590 LT15090 LT20090 LT25090 LT30090 LT35090 LT40090 LT3890 LT5090 LT7590 LT10090 LT12590 LT15090 LT20090 LT25090 LT30090 LT35090 LT40090 LT3890G LT5090G LT7590G LT10090G LT12590G LT15090G LT20090G LT25090G LT30090G LT35090G LT40090G LT3890G LT5090G LT7590G LT10090G LT12590G LT15090G LT20090G LT25090G LT30090G LT35090G LT40090G LT3890G LT5090G LT7590G LT10090G LT12590G LT15090G LT20090G LT25090G LT30090G LT35090G LT40090G LT3890-S LT5090-S LT7590-S LT10090-S LT12590-S LT15090-S LT20090-S LT3890G-S LT5090G-S LT7590G-S LT10090G-S LT12590G-S LT15090G-S LT20090G-S 4

LIQUITOR LIQUITIGHT FITTINGS imensions (in inches) F H G E H Straight 45 90 Non- Malleable Iron imensions onduit/npt E F G H 1 5/16" 1 5/8" 1 15/16" 1 1 5/8" 1 1 1 5/8" 1 2 3/16" 1 5/8" 1 13/16" 2 5/16" 2 1/8" 2 1 13/16" 1 11/16" 2 1/4" 2 2 1/4" 2 13/16" 2 3/16" 1 1 5/8" 2 7/16" 3 11/16" 2 2 7/16" 1 3 3/16" 2 3 11/16" 2 13/16" 2 2 3/16" 4" 8 5/16" 8 3/16" 7 5/16" 4 7/16" 2 4 3/16" 9 13/16" 9 7 5/8" 5 3 2 5/8" 1 3/16" 5 1/4" 11 3/16" 1 9 5/8" 5 15/16" 1 4" 2 5 1 12 11 1/16" 8 5/16" 1 5" 3 1/8" 6 1/16" 1 11/16" 6" 3 1 7 1 11/16" E Straight 90 Non- luminum imensions onduit/npt E 1 3/16" 19/3 1 1 5/16" 19/3 1 1 1 5/16" 19/3 1 1 11/16" 1 13/16" 1 1 13/16" 1 13/16" 2 1/4" 2 7/16" 2 5/3 1 1 13/16" 13/16" 2 2 13/16" 2 7/16" 1 7/8" 3 3/16" 2 7/8" 2 2 1/4" 1 1/16" 3 2 7/16" 4 3 2 7/8" 1 3/16" 5 1/8" 4" 2 15/16" 5 5/8" 5

ZIN IE ST LIQUITIGHT ONUIT FITTINGS ooper rouse-hinds Zinc ie ast liquidtight conduit fi ttings are used for the wiring of machine tools, motors, transformers, food processing equipment, robotics, air conditioning units, illuminated store front signs and billboards, etc. The fl exible metallic conduit and fi ttings protect conductors from mechanical damage due to vibration and movement, and seals out cutting oils, coolants, water, dust, etc. ertifi cations & ompliances UL Listed UL File No. E-19189 Ordering & imensional Information pplications & Features pplications To terminate and seal liquidtight fl exible metal conduit to oiltight, liquidtight, or raintight box or enclosure. onnectors can be used with tapered thread female entry or unthreaded knockout using the provided sealing washer and lock nut. Features Furnished with lock nut and sealing ring. Liquidtight, raintight, oiltight. Suitable for wet locations. Straight onnector Non- Zinc ie ast at. # Unit Qty. Standard Pkg. LT38 1.07.96.62.47 25 250 LT50 1.07 1.08.62.47 25 250 LT75 1.07 1.33.82.47 15 150 LT100 1.34 1.56 1.02.57 8 80 LT125 1.51 1.94 1.36.71 5 50 LT150 1 1.52 2.19 1.60.71 4 40 LT200 1.54 2.66 2.07.71 2 20 LT250 2 2.20 3.28 2.51 1.06 1 10 LT300 2.22 3.80 3.13 1.06 1 10 LT350 3 2.36 4.28 3.58 1.06 1 6 LT400 4" 2.44 4.78 4.05 1.06 1 6 Straight onnector Zinc ie ast at. # Unit Qty. Standard Pkg. LT38 1.44.96.62.47 25 250 LT50 1.44 1.08.62.47 25 250 LT75 1.56 1.33.82.47 15 150 LT100 2.01 1.56 1.02.57 8 80 LT125 2.18 1.94 1.36.71 5 50 LT150 1 2.19 2.19 1.60.71 4 40 LT200 2.21 2.66 2.07.71 2 20 LT250 2 2.89 3.28 2.51 1.06 1 10 LT300 2.93 3.80 3.13 1.06 1 10 LT350 3 3.07 4.28 3.58 1.06 1 6 LT400 4" 3.15 4.78 4.05 1.06 1 6 90 ngle onnectors Non- Zinc ie ast at. # Unit Qty. Standard Pkg. LT3890.62.81.92 1.22 25 250 LT5090.62.91 1.02 1.22 25 250 LT7590.80 1.15 1.27 1.36 15 150 LT10090 1.02 1.38 1.48 1.73 8 80 LT12590 1.36 1.77 1.93 2.11 5 50 LT15090 1 1.61 2.01 2.17 2.43 4 40 LT20090 2.08 2.58 2.68 2.93 2 20 LT25090 2 2.51 3.15 3.21 3.62 1 10 LT30090 3.13 3.67 3.74 4.28 1 10 LT35090 3 3.58 4.17 4.23 4.84 1 6 LT40090 4" 4.06 4.74 4.75 5.37 1 6 90 ngle onnectors Zinc ie ast at. # Unit Qty. Standard Pkg. LT3890.62.81.92 1.22 25 250 LT5090.62.91 1.02 1.22 25 250 LT7590.80 1.15 1.27 1.36 15 150 LT10090 1.02 1.38 1.48 1.73 8 80 LT12590 1.36 1.77 1.93 2.11 5 50 LT15090 1 1.61 2.01 2.17 2.43 4 40 LT20090 2.08 2.58 2.68 2.93 2 20 LT25090 2 2.51 3.15 3.21 3.62 1 10 LT30090 3.13 3.67 3.74 4.28 1 10 LT35090 3 3.58 4.17 4.23 4.84 1 6 LT40090 4" 4.06 4.74 4.75 5.37 1 6 6

NON-METLLI LIQUITIGHT ONUIT FITTINGS ooper rouse-hinds Non-Metallic liquidtight conduit fi ttings are for use with non-metallic Type liquidtight conduit and fl exible non-metallic tubing to terminate and seal conduit to a liquidtight, oiltight, or raintight box or enclosure. They are used in applications such as wiring motors, transformers, processing equipment, pumps, etc. The non-metallic liquidtight connectors are made of nylon construction that is corrosion resistant and UV Rated for long outdoor life. They are furnished with a zinc die cast lock nut and sealing ring that seals out water and other corrosive liquids. They feature a no-spin ferrule that allows for easy installation (no disassembly required). The fi ttings are available in two styles, straight and 90 in trade sizes. Features & enefi ts Liquidtight, raintight, oiltight. Furnished with lock nut and sealing ring. orrosion resistant. Suitable for wet locations. No-spin ferrule. No disassembly required for installation. 90 has smooth, gradual radius bend to prevent abrasion of conductors. Materials ody and sealing ring: Nylon. Lock nut: Zinc die cast. ertifi cations & ompliances UL Listed cul Listed LT75NM LT50NM LT5090NM Ordering & imensional Information Straight onnector Nylon atalog No. Trade Unit Qty. Std Pkg. Weight Lbs. Per 100 imensions LT50NM 25 250 6.55.85.56 LT75NM 10 150 8.72 1.08.72 LT100NM 5 80 10.94 1.30.94 90 ngle onnector Nylon atalog No. Trade Unit Qty. Std Pkg. Weight Lbs. Per 100 imensions LT5090NM 25 150 7.55.85.56 LT7590NM 10 100 9.72 1.08.72 LT10090NM 5 50 13.94 1.30.94 ross Reference Information Trade T& atalog Number rlington atalog Number ridgeport atalog Number 7 Regal atalog Number EGS atalog Number H atalog Number LT-501 NMLT50 430-NMLT 3801 4Q-50P LT50NM LT-502 NMLT75 431-NMLT 3802 4Q-75P LT75NM LT-503 NMLT100 432-NMLT 3803 4Q-100P LT100NM LT-591 NMLT9050 470-NMLT 3841 4Q-950P LT5090NM LT-592 NMLT9075 471-NMLT 3842 4Q-975P LT7590NM LT-593 NMLT90100 473-NMLT 3843 4Q-9100P LT10090NM

LOW PROFILE LIQUITIGHT FITTINGS The Low Profi le liquidtight fi ttings are designed specifi cally for applications that require close side-by-side mounting of multiple liquidtight fi ttings in tight spaces. Standard Materials ody steel (straight fi ttings), malleable iron (angle fi ttings) Gland nut steel Ordering & imensional Information Ferrule steel Gland nut sealing ring nylon Sealing gasket polypropylene Straight onnectors Steel Standard Finishes Steel zinc electroplate Malleable iron zinc electroplate Nylon natural Polypropylene natural 1 1 2 2 HU HU onduit 1 Non- LTK38 LTK50 LTK75 LTK100 LTK125 LTK150 LTK200 LTK38 LTK50 LTK75 LTK100 LTK125 LTK150 LTK200 Over Round orner 1 1 3/3 1 3/16" 1 2 5/3 2 2 7/8" Hex 2 1 1/3 1 1 11/16" 2 1/16" 2 9/3 2 25/3 1 3/16" 1 11/3 1 5/8" 1 27/3 2 1/8" Thread Length 19/3 19/3 19/3 21/3 43/64" 23/3 23/3 45 ngle onnectors Malleable Iron 1 1 2 2 onduit Non- Over Round orner 1 Hex 2 Thread Length HU HU 45 45 1 LTK3845 LTK5045 LTK7545 LTK10045 LTK12545 LTK15045 LTK20045 LTK3845 LTK5045 LTK7545 LTK10045 LTK12545 LTK15045 LTK20045 1 3/3 1 3/16" 1 2 5/3 2 2 7/8" 1 1/3 1 1/3 1 1 11/16" 2 1/16" 2 9/3 2 25/3 1 7/3 1 5/16" 1 1 21/3 1 23/3 2 9/3 1 1/3 1 1/3 1 11/3 1 15/3 1 5/8" 19/3 19/3 13/3 21/3 11/16" 23/3 23/3 90 ngle onnectors Malleable Iron HU HU 1 2 1 2 90 90 onduit 1 Non- LTK3890 LTK5090 LTK7590 LTK10090 LTK12590 LTK15090 LTK20090 LTK3890 LTK5090 LTK7590 LTK10090 LTK12590 LTK15090 LTK20090 Over Round orner 1 1 3/3 1 3/16" 1 2 5/3 2 2 7/8" Hex 2 1 1/3 1 1 11/16" 2 1/16" 2 9/3 2 25/3 1 19/3 1 21/3 1 25/3 2 3/16" 2 2 5/8" 3 1/16" 1 17/3 1 27/3 1 15/16" 2 3/3 2 13/3 Thread Length 21/3 11/16" 23/3 23/3 For more information: ontact an authorized ooper rouse-hinds istributor, Sales Office or ustomer Service epartment: istributed by: In the U.S.: ooper rouse-hinds P.O. ox 4999 Syracuse, NY 13221 Toll Free: 866-764-5454 (315) 477-5531 FX: (315) 477-5179 crouse.customerctr@crouse-hinds.com In anada: ooper rouse-hinds anada Toll Free: 800-265-0502 (905) 507-4187 FX: (905) 568-7048 For office locations outside of North merica or for additional product information, visit our website at: www.crouse-hinds.com Mexico Latin merica/aribbean Germany ustralia sia ubai India Solutions.Worldwide. TM rouse-hinds is a registered trademark of ooper Industries, Inc. 4862-1106 2006 ooper Industries, Inc. Printed in U.S.