JIC CONTINUOUS HINGE BOXES
|
|
|
- Duane Walters
- 10 years ago
- Views:
Transcription
1 JIC CONTINUOUS HINGE BOXES Austin JIC Continuous Hinge (JH) boxes are Underwriters Laboratories Listed and are designed for use as electrical junction boxes, terminal wiring boxes, and instruments housing. They provide a degree of protection against dust, dirt, spraying of water, oil, and noncorrosive liquids. Construction: Fabricated in accordance with UL specifications from 14 gauge steel. Continuously welded seams ground smooth. Neoprene gasket attached to cover with oil resistant adhesive. Cover held in place by continuous hinge on one side and stainless steel external screw clamps on opposite side. External mounting feet. that are 6x4x3 and over have stand-offs provided for mounting optional panel or terminal kit. Finish: Austin JIC Continuous Hinge boxes are provided standard with an ANSI 61 gray polyester powder coating. Optional panel are painted white. 1 CLAMP USED WHEN "A" IS LESS THAN 8" DIA. Options: Special materials. Special finishes. PANEL (Optional) B-1.13 A-1.13 A+1.50 A+.75 A.38 C+.44 C.50 Custom box size or construction. Hasp for padlocking. B+1.18 SECTION - B-2.00 B FRONT VIEW WITH NO COVER AND CLAMPS REMOVED INDUSTR STANDARDS UL 50 Type 12 & 13 UL 508 Type 12 & 13 NEMA Type 12 & 13 CUL Type 12 & 13 Austin Electrical adkinville, NC 27055
2 JIC CONTINUOUS HINGE BOXES Austin Electrical adkinville, NC
3 JIC LIFT-OFF HINGE BOXES Austin JIC Lift-Off Hinge (JL) boxes are Underwriters Laboratories Listed and are designed for use as electrical junction boxes, terminal wiring boxes, and instruments housing. They provide a degree of protection against dust, dirt, spraying of water, oil, and noncorrosive liquids. Construction: Fabricated in accordance with UL specifications from 14 gauge steel. Continuously welded seams ground smooth. Neoprene gasket attached to cover with oil resistant adhesive. Cover held in place by stainless steel external screw clamps. Chain holds cover to box when cover is removed. that are 6x4x3 and over have stand-offs provided for mounting optional panel. External mounting feet. DIA. Finish: PANEL (Optional) B-1.13 A A A+.75 A+1.50 Austin JIC Lift-Off Hinge boxes are provided standard with an ANSI 61 gray polyester powder coating. Optional panels are painted white. B+.50 B-2.00 B Options: COVER ATTACHED TO BOX B SMALL CHAIN (NOT SHOWN). WHEN "B" = 8 OR MORE, 2 CLAMPS ARE USED AT THIS END FRONT VIEW WITH NO COVER AND CLAMPS REMOVED Special materials. Special finishes. C+.44 C.50 Custom box size or construction. SECTION - INDUSTR STANDARDS UL 50 Type 12 & 13 UL 508 Type 12 & 13 NEMA Type 12 & 13 CUL Type 12 & 13 Austin Electrical adkinville, NC 27055
4 JIC LIFT-OFF HINGE BOXES Catalog Enclosure Weight Panel Catalog Number Size (AxBxC) Number AB-443JL 4x4x3 2 NA AB-643JL 6x4x3 3 AB-64JP AB-863.5JL 8x6x3 1/2 5 AB-86JP AB-444JL 4x4x4 5 NA AB-644JL 6x4x4 2 AB-64JP AB-664JL 6x6x4 3 AB-66JP AB-1084JL 10x8x4 8 AB-108JP AB-12105JL 12x10x5 12 AB-1210JP AB-14126JL 14x12x6 16 AB-1412JP AB-16146JL 16x14x6 21 AB-1614JP Austin Electrical adkinville, NC
5 JIC SCREW COVER BOXES Austin JIC Screw Cover (JS) boxes are Underwriters Laboratories Listed and are designed for use as electrical junction boxes, terminal wiring boxes, and instruments housing. They are designed for indoor or outdoor use primarily to provide a degree of protection against windblown dust and rain, splashing water, hose directed water and damage from external ice formation. Construction: Fabricated in accordance with UL specifications from 14 gauge steel. Neoprene gasket attached to cover with oil resistant adhesive. Cover attached with captivated screws threaded into sealed wells. Continuously welded seams ground smooth. External mounting feet. that are 6x4x3 and over are provided with stand-offs for mounting optional panel. Finish: PANEL (Optional) DIA. B-1.13 A-1.13 A+1.50 A+.75 Austin JIC Screw Cover boxes are provided standard with an ANSI 61 gray polyester powder coating. Optional panels are painted white. A B+.50 B-2.00 FRONT VIEW WITH COVER REMOVED B Options: Special materials. Special finishes. C+.44 C Custom box size or construction..50 SECTION - INDUSTR STANDARDS UL 50 UL 508 NEMA CUL Austin Electrical adkinville, NC 27055
6 JIC SCREW COVER BOXES Catalog Enclosure Weight Panel Catalog Number Size (AxBxC) Number AB-443JS 4x4x3 2 NA AB-643JS 6x4x3 3 AB-64JP AB-863.5JS 8x6x3 1/2 5 AB-86JP AB444JS 4x4x4 2 NA AB-644JS 6x4x4 3 AB-64JP AB-664JS 6x6x4 4 AB-66JP AB-884JS 8x8x4 7 AB-88JP AB-1084JS 10x8x4 8 AB-108JP AB-10104JS 10x10x4 9 AB-1010JP AB-12105JS 12x10x5 11 AB-1210JP AB-866JS 8x6x6 7 AB-86JP AB-1086JS 10x8x6 10 AB-108JP AB-10106JS 10x10x6 11 AB-1010JP AB-12126JS 12x12x6 15 AB-1212JP AB-14126JS 14x12x6 16 AB-1412JP AB-16146JS 16x14x6 20 AB-1614JP Austin Electrical adkinville, NC
7 JIC NEMA 4 CONTINUOUS HINGE BOXES Austin JIC Continuous Hinge NEMA 4 (JFH) boxes are Underwriters Laboratories Listed and are designed for use as electrical junction boxes, terminal wiring boxes, and instruments housing. They are designed for indoor or outdoor use primarily to provide a degree of protection against windblown dust and rain, splashing water, hose directed water and damage from external ice formation. Construction: Fabricated in accordance with UL specifications from 14 gauge steel. Neoprene gasket attached to cover with oil resistant adhesive. Stainless steel external screw clamps on three sides. Stainless steel continuous hinge. Continuously welded seams ground smooth. External mounting feet. that are 6x4x3 and over are provided with stand-offs for mounting optional panel. DIA. Finish: PANEL (Optional) A-1.13 B A A+.75 A+1.50 Austin JIC Continuous Hinge NEMA 4 boxes are provided standard with an ANSI 61 gray polyester powder coating. Optional panels are painted white. B-2.00 B FRONT VIEW WITH NO COVER AND CLAMPS REMOVED C+.44 C Options:.50 Special materials. B+1.18 SECTION Special finishes. Custom box size or construction. 6x4 6x6 4x4 8x6 8x8 10x8 10x10 12x10 12x12 14x12 16x14 Hasp for padlocking. C L INDUSTR STANDARDS UL 50 UL 508 NEMA CUL Austin Electrical adkinville, NC 27055
8 JIC NEMA 4 CONTINUOUS HINGE BOXES Catalog Enclosure Weight Panel Catalog Number Size (AxBxC) Number AB-443JFH 4x4x3 2 NA AB-643JFH 6x4x3 3 AB-64JP AB-863.5JFH 8x6x3 1/2 6 AB-86JP AB-664JFH 6x6x4 4 AB-66JP AB-1084JFH 10x8x4 9 AB-108JP AB-12105JFH 12x10x5 13 AB-1210JP AB-10106JFH 10x10x6 11 AB-1010JP AB-12126JFH 12x12x6 15 AB-1212JP AB-14126JFH 14x12x6 17 AB-1412JP AB-16146JFH 16x14x6 20 AB-1614JP Austin Electrical adkinville, NC
9 JIC NEMA 4 CLAMP COVER BOXES Austin JIC Clamp Cover NEMA 4 (JFC) boxes are Underwriters Laboratories Listed and are designed for use as electrical junction boxes, terminal wiring boxes, and instruments housing. They are designed for indoor and outdoor use primarily to provide a degree of protection against windblown dust and rain, splashing water, hose directed water and damage from external ice formation. Construction: Fabricated in accordance with UL specifications from 14 gauge steel. Continuously welded and ground smooth. Cover held in place by stainless steel external screw clamps all four sides. Neoprene gasket attached to cover with oil resistant adhesive. External mounting feet. that are 6x4x3 and over have stand-offs provided for mounting optional panel. DIA. Finish: PANEL (Optional) B-1.13 A-1.13 A+1.50 A+.75 A.38 Austin JIC Clamp Cover NEMA 4 boxes are provided standard with an ANSI 61 gray polyester powder coating. Optional panels are painted white. B-2.00 B FRONT VIEW WITH NO COVER AND CLAMPS REMOVED C+.44 C.50 Options: Special materials. B+2.00 SECTION Special finishes. Custom box size or construction. 6x4 6x6 4x4 8x6 8x8 10x8 10x10 12x10 12x12 14x12 16x14 C L INDUSTR STANDARDS UL 50 UL 508 NEMA CUL Austin Electrical adkinville, NC 27055
10 JIC NEMA 4 CLAMP COVER BOXES Catalog Enclosure Weight Panel Catalog Number Size (AxBxC) Number AB-443JFC 4x4x3 2 NA AB-643JFC 6x4x3 3 AB-64JP AB-863.5JFC 8x6x3 1/2 6 AB-86JP AB-664JFC 6x6x4 4 AB-66JP AB-1084JFC 10x8x4 9 AB-108JP AB-12105JFC 12x10x5 12 AB-1210JP AB-14126JFC 14x12x6 17 AB-1412JP AB-16146JFC 16x14x6 21 AB-1614JP Austin Electrical adkinville, NC
11 JIC NEMA 4X CONTINUOUS HINGE BOXES Austin JIC Continuous Hinge NEMA 4X (JHFX) boxes are Underwriters Laboratories Listed and are designed for housing electrical components in highly corrosive environments. They are designed for indoor or outdoor use primarily to provide a degree of protection against corrosion, windblown dust and rain, splashing water, hose directed water and damage from external ice formation. Construction: Fabricated in accordance with UL specifications from 14 gauge Type 304 stainless steel. Continuously welded seams ground smooth. Stainless steel external screw clamps. Stainless steel continuous hinge. Neoprene gasket attached to cover with oil resistant adhesive. External mounting feet. that are 6x4x3 and over have stainless steel stand-offs provided for mounting optional panel. DIA. Finish: PANEL (Optional) B-1.13 A-1.13 A+1.50 A+.75 A.38 Austin JIC Continuous Hinge NEMA 4X boxes are provided standard in Type 304 stainless steel. Optional panels are painted white or stainless steel panels are unpainted. B-2.00 B FRONT VIEW WITH NO COVER AND CLAMPS REMOVED C+.44 C Options:.50 B+1.18 Type 316 Stainless Steel. SECTION Custom box size or construction. 6x4 6x6 4x4 8x6 8x8 10x8 10x10 12x10 12x12 14x12 16x14 Hasp for padlocking. C L INDUSTR STANDARDS UL 50 Types 4, 4X, 12 & 13 UL 508 Types 4, 4X, 12 & 13 NEMA Types 4, 4X, 12 & 13 CUL Types 4, 4X, 12 & 13 Austin Electrical adkinville, NC 27055
12 JIC NEMA 4X CONTINUOUS HINGE BOXES Catalog Enclosure Weight Panel Catalog Number Size (AxBxC) Number AB-863.5JHFX 8x6x3 1/2 6 AB-86JP AB-664JHFX 6x6x4 5 AB-66JP AB-884JHFX 8x8x4 7 AB-88JP AB-1084JHFX 10x8x4 9 AB-108JP AB-12105JHFX 12x10x5 13 AB-1210JP AB-14126JHFX 14x12x6 17 AB-1412JP AB-16146JHFX 16x14x6 20 AB-1614JP Austin Electrical adkinville, NC
13 JIC NEMA 4X CLAMP COVER BOXES Austin JIC Clamp Cover NEMA 4X (JFCX) boxes are Underwriters Laboratories Listed and are designed for housing electrical components in highly corrosive environments. They are designed for indoor or outdoor use primarily to provide a degree of protection against corrosion, windblown dust and rain, splashing water, hose directed water and damage from external ice formation. Construction: Fabricated in accordance with UL specifications from 14 gauge Type 304 stainless steel. Continuously welded seams and ground smooth. Neoprene gasket attached to cover with oil resistant adhesive. Cover held in place by stainless steel external screw clamps. External mounting feet. that are 6x4x3 and over have stainless steel stand-offs provided for mounting optional panel. DIA. Finish: PANEL (Optional) B-1.13 A-1.13 A+1.50 A+.75 A.38 Austin JIC Clamp Cover NEMA 4X boxes are provided standard in Type 304 stainless steel. Optional panels are painted white or stainless steel panels are unpainted. B-2.00 B FRONT VIEW WITH NO COVER AND CLAMPS REMOVED C+.44 C.50 Options: B+2.00 Type 316 Stainless Steel. SECTION Custom box size or construction. 6x4 6x6 4x4 8x6 8x8 10x8 10x10 12x10 12x12 14x12 16x14 C L INDUSTR STANDARDS UL 50 Types 4, 4X, 12 & 13 UL 508 Types 4, 4X, 12 & 13 NEMA Types 4, 4X, 12 & 13 CUL Types 4, 4X, 12 & 13 Austin Electrical adkinville, NC 27055
14 JIC NEMA 4X CLAMP COVER BOXES Catalog Enclosure Weight Panel Catalog Number Size (AxBxC) Number AB-863.5JFCX 8x6x3 1/2 6 AB-86JP AB-664JFCX 6x6x4 5 AB-66JP AB-884JFCX 8x8x4 7 AB-88JP AB-1084JFCX 10x8x4 9 AB-108JP AB-12105JFCX 12x10x5 13 AB-1210JP AB-12126JFCX 12x12x6 15 AB-1212JP AB-14126JFCX 14x12x6 17 AB-1412JP AB-16146JFCX 16x14x6 20 AB-1614JP Austin Electrical adkinville, NC
15 JIC ALUMINUM CONTINUOUS HINGE BOXES Austin JIC Continuous Hinge aluminum (JHA) boxes are Underwriters Laboratories Listed and are designed for use as electrical junction boxes, terminal wiring boxes, and instruments housing. They provide a degree of protection against dust, dirt, spraying of water, oil, and noncorrosive liquids. Construction: Fabricated in accordance with UL specifications from code gauge Type 5052 H-32 aluminum. Cover held in place by external screw clamps and aluminum continuous hinge. External mounting feet. that are 6x4x3 and over have aluminum stand-offs provided for mounting optional panel. Continuously welded seams ground smooth. Neoprene gasket attached to cover with oil resistant adhesive. Finish: PANEL (Optional) A-1.13 DIA. B-1.13 A+.75 A+1.50 Austin JIC continuous hinge aluminum boxes are provided standard in Type 5052 H-32 aluminum. Optional aluminum panels are unpainted and optional steel panels are painted white..38 A 1 CLAMP USED WHEN "A" IS LESS THAN 8" B-2.00 B FRONT VIEW WITH NO COVER AND CLAMPS REMOVED Options: Custom box size or construction. Hasp for padlocking. C+.44 C.50 B+1.18 SECTION - INDUSTR STANDARDS UL 50 Type 12 & 13 UL 508 Type 12 & 13 NEMA Type 12 & 13 CUL Type 12 & 13 Austin Electrical adkinville, NC 27055
16 JIC ALUMINUM CONTINUOUS HINGE BOXES Catalog Enclosure Weight Panel Catalog Number Size (AxBxC) Number AB-643JHA 6X4X3 3 AB-64JP AB-863.5JHA 8x6x3 1/2 2 AB-86JP AB-664JHA 6x6x4 2 AB-66JP AB-1084JHA 10x8x4 3 AB-108JP AB-12105JHA 12x10x5 5 AB-1210JP AB-14126JHA 14x12x6 7 AB-1412JP AB-16146JHA 16x14x6 9 AB-1614JP Austin Electrical adkinville, NC
17 JIC NEMA 4X ALUMINUM CLAMP COVER BOXES Austin JIC Clamp Cover NEMA 4X aluminum (JCA) boxes are Underwriters Laboratories Listed and are designed for use as electrical junction boxes, terminal wiring boxes, and instruments housing. They are designed for indoor or outdoor use primarily to provide a degree of protection against windblown dust and rain, splashing water, hose directed water, and damage from external ice formation. Construction: Fabricated in accordance with UL specifications from code gauge Type 5052 H-32 aluminum. Cover is held in place by external screw clamps on all four sides. Continuously welded seams ground smooth. Neoprene gasket attached to cover with oil resistant adhesive. External mounting feet. that are 6x4x3 and over have aluminum stand-offs provided for mounting optional panel. DIA. Finish: PANEL (Optional) B-1.13 A-1.13 A+1.50 A+.75 A.38 Austin JIC Clamp Cover NEMA 4X aluminum boxes are provided standard in Type 5052 H-32 aluminum. Optional aluminum panels are unpainted and optional steel panels are painted white. B-2.00 B FRONT VIEW WITH NO COVER AND CLAMPS REMOVED C+.44 C.50 Options: B+2.00 SECTION - Custom box size or construction x4 6x6 4x4 8x6 8x8 10x8 10x10 12x10 12x12 14x12 16x14 C L INDUSTR STANDARDS UL 50 Types 4, 4X, 12 & 13 UL 508 Types 4, 4X, 12 & 13 NEMA Types 4, 4X, 12 & 13 CUL Types 4, 4X, 12 & 13 Austin Electrical adkinville, NC 27055
18 JIC NEMA 4X ALUMINUM CLAMP COVER BOXES Catalog Enclosure Weight Panel Catalog Number Size (AxBxC) Number AB-863.5JCA 8x6x3 1/2 2 AB-86JP AB-664JCA 6x6x4 2 AB-66JP AB-1084JCA 10x8x4 3 AB-108JP AB-12106JCA 12x10x6 5 AB-1210JP AB-14126JCA 14x12x6 7 AB-1412JP AB-16146JCA 16x14x6 9 AB-1614JP Austin Electrical adkinville, NC
19 SMALL OILTIGHT ENCLOSURES Austin small oiltight (STE) enclosures are Underwriters Laboratories Listed and are designed for use as electrical junction boxes, terminal wiring boxes, and instruments housing. They provide a degree of protection against dust, dirt, spraying of water, oil, and noncorrosive liquids. Construction: Fabricated from 14 gauge steel. Door attached by continuous hinge and captivated screws threaded into sealed wells. Neoprene gasket attached to door with oil resistant adhesive. External mounting feet. Stand-offs provided for mounting optional panel. Continuously welded seams ground smooth. Finish: DIA. Austin small oiltight enclosures are provided standard with an ANSI 61 gray polyester powder coating. Optional panels are painted white. B-1.13 A+1.50 A-1.13 A A 1.00 B-2.00 B FRONT VIEW WITH NO COVER AND NO HINGE Options: Special materials. Special finishes. C+.44 C.50 Custom box size or construction. Hasp for padlocking. SECTION - INDUSTR STANDARDS UL 50 Type 12 & 13 UL 508 Type 12 & 13 NEMA Type 12 & 13 CUL Type 12 & 13 Austin Electrical adkinville, NC 27055
20 SMALL OILTIGHT ENCLOSURES Catalog Enclosure Weight Panel Catalog Number Size (AxBxC) Number AB-664STE 6x6x4 4 AB-66JP AB-864STE 8x6x4 5 AB-86JP AB-884STE 8x8x4 6 AB-88JP AB-1084STE 10x8x4 7 AB-108JP AB-10104STE 10x10x4 8 AB-1010JP AB-12104STE 12x10x4 10 AB-1210JP AB-866STE 8x6x6 7 AB-86JP AB-886STE 8x8x6 8 AB-88JP AB-1086STE 10x8x6 9 AB-108JP AB-10106STE 10x10x6 10 AB-1010JP AB-12106STE 12x10x6 12 AB-1210JP AB-12126STE 12x12x6 14 AB-1212JP AB-14126STE 14x12x6 16 AB-1412JP Austin Electrical adkinville, NC
21 LARGE OILTIGHT ENCLOSURES Austin large oiltight (JXL) enclosures are Underwriters Laboratories Listed and are designed to house electrical controls, instruments, and terminals. They provide a degree of protection against dust, dirt, spraying of water, oil, and noncorrosive liquids. Construction: Fabricated in accordance with UL specifications from code gauge steel. Continuously welded seams ground smooth. Door attached by continuous hinge and captivated screws threaded into sealed wells. Neoprene gasket attached to door with oil resistant adhesive. Standard plastic self-adhesive print pocket. Standard collar studs provided for mounting optional panel. External mounting feet. Finish: OMIT CENTER SCREW IF "A" IS LESS THAN 31" Austin large oiltight enclosures are provided standard with an ANSI 61 gray polyester powder coating. Optional panels are painted white..43 DIA..63 PANEL (Optional) Options: B-3.00 A-3.00 A B+.56 Special materials. Special finishes. OMIT CENTER STUDS IF "A" IS LESS THAN 31" C+.50 C 1.00 Custom box size or construction. SECTION - B-6.00 B FRONT VIEW WITH NO COVER AND NO HINGE INDUSTR STANDARDS UL 50 Type 12 & 13 UL 508 Type 12 & 13 NEMA Type 12 & 13 CUL Type 12 & 13 Austin Electrical adkinville, NC 27055
22 LARGE OILTIGHT ENCLOSURES Catalog Enclosure Weight Panel Catalog Catalog Enclosure Weight Panel Catalog Number Size (AxBxC) Number Number Size (AxBxC) Number AB-20167JXL 20x16x7 31 AB-2016TP AB-30249JXL 30x24x9 66 AB-3024TP AB-20207JXL 20x20x7 36 AB-2020TP AB-36249JXL 36x24x9 76 AB-3624TP AB-24207JXL 24x20x7 41 AB-2420TP AB-36309JXL 36x30x9 90 AB-3630TP AB-24247JXL 24x24x7 48 AB-2424TP AB-42309JXL 42x30x9 102 AB-4230TP AB-30207JXL 30x20x7 49 AB-3020TP AB-42369JXL 42x36x9 121 AB-4236TP AB-30247JXL 30x24x7 58 AB-3024TP AB-36247JXL 36x24x7 66 AB-3624TP AB JXL 24x24x11 57 AB-2424TP AB JXL 36x24x11 80 AB-3624TP AB-20169JXL 20x16x9 35 AB-2016TP AB JXL 48x36x AB-4836TP AB-20209JXL 20x20x9 36 AB-2020TP AB-24209JXL 24x20x9 47 AB-2420TP AB-24249JXL 24x24x9 52 AB-2424TP AB JXL 30x24x13 72 AB-3024TP AB-30209JXL 30x20x9 54 AB-3020TP AB JXL 36x30x AB-3630TP Austin Electrical adkinville, NC
Type 1, 3, & 3R Enclosures
Junction oxes Type 1 Screw over....................................................................... 50-53 Junction oxes Type 1 Hinge over........................................................................
TABLE OF CONTENTS. Section 1 Type 1 & 3R Enclosures pg. 2-19. Section 2 Type 4 & 12 Enclosures pg. 20-47
TLE OF CONTENTS Section 1 Type 1 & 3R pg. 2-19 Type 1 & 3R Section 2 Type 4 & 12 pg. 20-47 Section 3 Flange Mounted Disconnect pg. 48-89 Section 4 Type 4, 12 & 13 Oiltight pg. 90-111 Section 5 Pushbutton
Section H Index. www.hubbell-wiegmann.com Data Subject To Change Without Notice OPERATOR INTERFACE
Section H Index H1 W1 Series NEMA 12 onsoles...h2 W9 Series NEMA 12 onsoles...h4 W10 Series NEMA 12 onsoles...h6 W12 Series NEMA 12 onsoles...h8 W14 Series NEMA 12 onsoles...h10 W- Series NEMA 12 onsolets...h12
Application Guide Selection of Type Enclosures
Application Guide Selection of Type Enclosures. ASCO Power Technologies Enclosure Application Guide June 2009 Pub. 3212 1 Mission Statement The purpose of this document is to educate the reader with regard
Scepter PVC Molded Junction Boxes
Scepter PVC Molded Junction Boxes TM ELECTRICAL SYSTEMS PVC MOLDED JUNCTION BOXES 4" to 12" Fully Certified: NEMA, UL & CSA We build tough products for tough environments Standing Still is Not an Option.
Low Voltage Transformers Sealed, General Purpose, Dry Type
Low Voltage Transformers Sealed, General Purpose, Dry Type Catalog 7400CT9601R4/08 08 Class 7400 CONTENTS Description..............................................Page Introduction.................................................
Metallic and Non-Metallic Air Conditioning Disconnects. A Complete Family of. Disconnects with Exclusive Time Saving Features
Metallic and Non-Metallic Air Conditioning Disconnects A Complete Family of Disconnects with Exclusive Time Saving Features Enclosed Molded Case Disconnect Switch Not-Fusible The preferred molded case
PROLINE Go l d Se r i e s. Desk Consoles and Accessories
Modular Enclosure Systems Application PROLINE Gold Series desk consoles are ergonomically designed for use in either a sitting or standing position. Single-access consoles have a front door and solid back.
ASCO SERIES 185 Power Transfer Switches
ASCO SERIES 185 Power Transfer Switches 4-hour protection no matter when trouble strikes ASCO Series 185 Power Transfer Switches An Automatic Transfer Switch helps prevent... Your business or home from
CABINET OPTIONS AND DESIGNATORS
CABINET OPTIONS AND DESIGNATORS Hinges: ~Stainless steel lift off Nuts and Bolts: ~ Stainless steel Hardware: ~ Handles and Corbin locks are stainless steel or zinc plated Windows: ~ Lexan Backboards:
IP Rating Chart. 910 East Orangefair Lane Anaheim, CA 92801 USA. www.anaheimautomation.com 714-992-6990 714-992-0471, Fax
IP, NEMA and UL Rating Codes The International Protection Rating, sometimes referred to as an Ingress Protection rating, is a set of codes used to define specific levels of protection. These codes consist
BERTHOLD ELECTRIC GENERATOR CONNECTION CABINET
BERTHOLD ELECTRIC GENERATOR CONNECTION CABINET Berthold Electric Company s Generator Connection Cabinet provides a quick and convenient station to connect a portable generator to a facility s main service
Stainless Steel and Mild Steel Enclosures. Stainless Steel and Mild Steel Enclosures
SX 8 The SX range comprises 14 sizes of enclosure manufactured in either stainless steel or mild steel. 11 sizes are available in depths of 140 or 200mm and 8 sizes are available in depths of 140, 200
www.hammondmfg.com General Accessories Hardware
Heavy Duty Door Clamping Junction Box Padlock Kit Quick Release Clamp Replacement hardware for use on all 1418 and 1447 Series enclosures. Formed heavy gauge stainless steel clamp with stainless steel
Scepter PVC Molded Junction Boxes
Scepter PVC Molded Junction Boxes ELECTRICAL SYSTEMS PVC MOLDED JUNCTION BOXES 4" to 12" We build tough products for tough environments Standing Still is Not an Option. We re proud to introduce the NEW
STB Series Enclosures
STB Series Enclosures Features/Applications: The STB series of sheet steel enclosures are designed to meet the requirement for distribution and lighting junction boxes. Available in 14 sizes with standard
ARTS AND CRAFTS 10.1.0. 5410 (open) 5412 (doors) H : 84" Tote Tray Storage. Damp Storage. Tote Tray Storage. Notebook Board Storage, Doors
Drawing Board Storage, Open Drawing Board Storage, Doors Drawing Board Storage Notebook Storage, Open 1670 D : 23.25" holds 32 drawing boards 1 shelf, adjustable on 1¼" increments maximum board height
Cable & Wire Management
able & ire Management able & ire Management Lay-In ireway Type 1 Screw over... 8-14 Lay-In ireway Type 1 Quick-onnect inge over... 15-20 Lay-In ireway Type 3R EnviroShield... 21-24 Lay-In ireway Type 12...
Cluster Box Units. (CBU s) 3300 Series CBU Door Sizes. Fully Integrated Parcel Lockers CLUSTER BOX UNITS FRONT LOADING. continued on pages 7-11
Cluster Box Units (CBU s) continued on pages 7-11 CLUSTER BOX UNITS FRONT LOADING Made of heavy duty aluminum and stainless steel hardware, Salsbury 3300 series U.S.P.S. approved Cluster Box Units (CBU
Mini Power-Zone Unit Substation Product Description. Product Description. Features. Typical Applications
Product Description Product Description The Mini Power-Zone Unit Substation from Schneider Electric is a miniaturized version of our Power-Zone Unit Substation. Included are: Circuit Breaker Sealed Step-Down
PAINT BOOTH LIGHTING
PAINT BOOTH LIGHTING PAINT BOOTH LIGHTING Lighting is comprised of many components that need to be considered when selecting the appropriate fixtures and lamps to accomplish a specific task. Selecting
TERMINATION ENCLOSURE OPTIONS
TERMINATION ENCLOSURE OPTIONS Add suffix: R - Reverse Stagger the Bus Bars (to run cable in from the top) CU - Copper NEMA Mount Bus Bars C - Plastisol Covers for Bus Bars DF - Dead Fronts T - Tin Plated
Locks, Latches, Inserts, & Handles Flush Locks Illustration Sheet and Catalog Number. Type 1 Enclosure Flush Lock. New Flush lock
Locks, Latches, Inserts, & Handles Flush Locks Illustration Sheet and Type 1 Panel Enclosure Flush Lock Type 1 Enclosure Flush Lock T1EFL New Flush lock.886 dia. (22) Hole Pattern Detail Flush Locks are
PAGE/PARTY. Solutions. GAI-Tronics Page/Party. communication systems. provide paging and. party-line capabilities... two important plant
GAI-TRONICS A Hubbell Company PAGE/PARTY Solutions GAI-Tronics Page/Party communication systems provide paging and party-line capabilities... two important plant communication functions in one durable,
Enclosing innovations. Enclosure catalog. Version 4.1 US
Enclosing innovations Enclosure catalog Version 4.1 US Contents Fibox Enclosing innovations 2 Fibox web services 3 Enclosure selection guide 4 Customizing services 5 Fibox quality; NEMA/UL classifications
CHAPTER7. Base with Cutout for Sloped Front... 591 Support Bracket... 591 Bases for Sloped Front... 592 Wall-Mount Kit... 592
63.422.22 63.422.2600 HMI - Human-Machine Interface CHAPTER Human Machine Interface Chapter Contents HMI Product Selection Guide Overview HMI Product Selection Guide... 548 INLINE HMI System and Accessories
4. Combi valves. 7. Fire hydrants. 8. Check valves. 9. Air valves
1. General company and product information 2. Flanged gate valves for water 3. Other gate valves for water 4. Combi valves 5. Service connection valves for water 6. Valves and fittings for gas 7. Fire
NEMA Enclosure Types
The purpose of this document is to provide general information on the definitions of NEMA Enclosure Types to architects, engineers, installers, inspectors and other interested parties. [For more detailed
FAIRFIELD INDUSTRIES INC.
FAIRFIELD INDUSTRIES INC. v NEW PRICE SCHEDULE 4/1/201 SUPERSEDES 4/1/11 SPILL CONTAINMENT And STREET ACCESS MANHOLES for UNDERGROUND And ABOVEGROUND TANKS SPILL CONTAINMENT MANHOLES MONITOR WELL SERIES
SURGE PROTECTIVE DEVICES (SPDs) LOW VOLTAGE AC EXTERNAL SIDEMOUNT SURGE PROTECTION FOR ELECTRICAL DISTRIBUTION SYSTEMS SECTION 16671B SECTION 16671B
SURGE PROTECTIVE DEVICES (SPDs) EXTERNAL SIDEMOUNT UNITS LOW VOLTAGE AC SURGE PROTECTION FOR ELECTRICAL DISTRIBUTION PART 1 GENERAL 01 02 03 SCOPE The Contractor shall furnish and install the Surge Protective
Cable Runways & Accessories
SB17U SB13AL SB17 SB17T SB117 SB17HRB SB2107 SB2101A SB17VRB SB2110A SB2129 SB2129SD SB130 SB2221 SB126 SB2118 SB119 SB2105 113 Cooper B-Line manufactures a wide variety of high quality cable pathway products
MCC Ratings. Voltage Rating
MCC Ratings In addition to the various ratings of individual components used in motor control centers, the overall ratings of the motor control center must also be considered. Voltage Rating Motor control
Generator DoCKInG StatIonS
Generator DOCKING STATIONS TRYSTAR Portable Power Cable Cam to cam cable extensions 2000V, 100A-400A rated to NEC table 400.5 (B) All portable power cable sold is highly flexible and UL & C-UL or CSA Listed
GUE, GUB Junction Boxes
E GUE, GUB Junction Boxes Cl. I, Div. & 2, Groups B, C, D Cl. II, Div., Groups E, F, G Cl. II, Div. 2, Groups F, G Cl. III NEMA 4*, BCD, 9EFG Ex d IIC T6, IP66 Ex d IIC, IP66, ATEX certified Explosionproof
Lighting Packages. 230 VAC Fluorescent Enclosure Light:
Spec-00581 H763.422.2211 763.422.2600 Electrical Lighting Packages Electrical Lighting Packages PANELITE Enclosure Lights Overview FEATURES Slim profile allows light to be tucked up out of the way for
Conduit Fittings & Accessories Directional Drilling Conduit Utility Duct Telephone Duct Residential Boxes
CANTEX INC. 301 Commerce Ste 2700 Fort Worth, Texas 76102 817-215-7000 Fax: 817-215-7001 Conduit Fittings & Accessories Directional Drilling Conduit Utility Duct Telephone Duct Residential Boxes YOUR FULL
Watertight Luminaire, surface, 1x18W / 2x18W / 2x24W / 1x36W / 2x36W / 2x54W
Watertight Luminaire, surface, 1x18W / x18w / x4w / 1x36W / x36w / x54w IP67 00 cd/klm 18W 36W 30V/ 50/60Hz 1x18W 5105 0005..-xxx.8 x18w 5105 0001..-xxx 3.8 x4w 5105 0045..-xxx 3.0 x54w 5105 0044..-xxx
SECTION 23 00 01 HEATING, VENTILATION AND AIR CONDITIONING EQUIPMENT
SECTION 23 00 01 HEATING, VENTILATION AND AIR CONDITIONING EQUIPMENT PART 1 - GENERAL 1.1 DESCRIPTION A. The Work specified in this Section consists of designing, furnishing and installing factory-assembled
Morrison Bros. Co. General Product Specifications
Morrison Bros. Co. General Product Specifications Tank Mounted Spillbox The spill containment device is manufactured to contain spills and drips that may occur at the fill point on aboveground storage
Quick Connect Boxes Inside Gloveboxes
ULC Series Junction Boxes Quick Connect Boxes Inside Gloveboxes The ULC quick connect junction boxes are the essential elements to optimize the cabling inside gloveboxes. Large range Designed for nuclear
Plugs and Receptacles
Plugs and Receptacles Industrial Heavy Duty Interlocked Application and Selection Applications: Where extra protection is a requirement; interlocked units provide dead front receptacles; connection cannot
All work must conform to the National Electric Code, latest edition, and all other applicable codes and regulations.
DIVISION 16 ELECTRICAL SECTION 16100 - ELECTRICAL PART 1 - GENERAL SCOPE All electrical work as shown on the drawings and as necessary to provide a complete electrical system. Include primary service,
Learning Module 13: Panelboards and Switchboards. 101 Basic Series
Learning Module 13: Panelboards and Switchboards 101 Basic Series What You Will Learn We ll step through each of these topics in detail: Introduction 4 Definitions 4 Similarities Between Panelboards and
Mini Power-Zone Unit Substation
Catalog 7440CT0901 2009 Class 7440 CONTENTS Description............................................. Page Product Description...........................................2 General Information...........................................3
FITTINGS: CAST DEVICE BOXES. Applications. Illustrated Features
and FD Cast Hub Device Boxes UNILETS for use with Threaded Rigid Conduit and IMC. All Device Boxes have Ridge Top Construction. Furnished with Internal Ground Screw. Fittings FITTINGS: CAST DEVICE BOXES
EDS / EFS Series Control Stations
EDS / EFS Series Fully Assembled EFS and EDS Factory Sealed Devices NEMA, 7B*CD, 9EFG Applications: Factory sealed enclosures are installed in a rigid metallic conduit system for surface mounting adjacent
STANDARD SPECIFICATIONS SECTION 05500 METAL FABRICATIONS
STANDARD SPECIFICATIONS SECTION 05500 METAL FABRICATIONS PART 1 GENERAL 1.1 DESCRIPTION A. Section includes requirements for providing metal fabricated items like castings, gratings, hatchways, ladders,
Accents & Accessories
Accents & Accessories Commercial Grade Industrial Grade Residential Grade Pool Fences Custom & Estate Gates Elite Fence Products was established in 1986 and is family owned and operated. Elite manufactures
Vigilant LED High Bay for Indoor and Outdoor Industrial Applications
for Indoor and Outdoor Industrial Applications for Indoor and Outdoor Industrial Applications About Dialight Dialight (LSE: DIA.L) is leading the energy efficient LED lighting revolution around the world
Temperature Controlled Enclosures
7 Indoors or Outdoors - We ve Got You Covered! Temperature Controlled Enclosures Protect your electronics and control their environment! FC Series - NEMA 3R outdoor enclosures with UL Listed fans, filters,
ROOF DRAINS TABLE OF CONTENTS
Pictorial Index Product Recommendations Roof Drain Selection Factors Sizing Placement Material & Characteristics Pipe Connection Commonly Specified Options Typical Installations TABLE OF CONTENTS ROOF
Myers Hubs. The broadest, most complete offering for terminating Rigid/IMC to a box or enclosure
Myers Hubs The broadest, most complete offering for terminating Rigid/IMC to a box or enclosure Myers Hubs The Original! Often imitated, never duplicated! Available in a wide range of sizes, materials
Midwest Industrial Tanks
FOR AGRICULTURE AND INDUSTRY Midwest Industrial Tanks Fuel & Oil Storage Solutions Midwest Industrial Tanks Is Your Source For All Of Your Fuel Storage And Fuel Transportation Needs. Our Satisfied Customers
Rental Services Temporary Cooling - Flexible Water Hose
Engineering Bulletin Rental Services Temporary Cooling - Flexible Water Hose September 2006 CHS-PRB007-EN Warnings and Cautions Warnings and Cautions. Notice that warnings and cautions appear at appropriate
CLICKBOND FASTENER OVERVIEW:
Infastech Pty Ltd A.B.N. 98 000 482 986 A.C.N. 000 482 986 891 Wellington Road, Rowville, Victoria, 3178 Telephone: (03) 9765 6400 Fax (03) 9765 6444 CLICKBOND FASTENER OVERVIEW: The CLICKBOND fastening
DENVER MODEL 30 X 30 SPECIFICATIONS
DENVER MODEL 30 X 30 SPECIFICATIONS Dimensions: Roof Dimensions 30-0 x 30-0 (4) Columns (Center to Center) 25-6½ x 25-6½ Minimum Clearance 8-0 Roof Height @ Peak Dependent on Col. Ht. Hip Roof 4:12 pitch
How To Use A Ds340 (Dsp)
Ideal for monitoring dust levels in the exhaust gas of industrial combustion or air filtration processes. Innovative Dynamic Detection Principle (DDP) measurement technique Immune to gradual reductions
CONTROL PANEL INSTALLATION INSTRUCTIONS. Single Phase Simplex Page 2-7. 3-Phase Simplex Page 8-13
CONTROL PANEL INSTALLATION INSTRUCTIONS Single Phase Simplex Page 2-7 3-Phase Simplex Page 8-13 Single Phase Simplex SXL21=3, SXL24=3, SXH21=3, and SXH24=3 Manufactured by SJE-Rhombus Installation Instructions
EMI Shielding Tapes Product Selection Guide. Trusted. Performance. from the. Tape Experts
EMI Shielding Tapes Product Selection Guide Trusted Performance from the Tape Experts 3M EMI Shielding Tapes A wide variety of tapes for EMI shielding and grounding Copper, aluminum, and tin-plated copper
Rugged Industrial Telephones
Rugged Industrial Telephones GAI-TRONICS A Hubbell Company GAI-Tronics, a Hubbell Company, has been the leading manufacturer in the industrial communications industry for over 65 years. Oil rigs, power
ELECTRICAL GUIDELINES FOR SINGLE-FAMILY HOME OWNERS:
ELECTRICAL GUIDELINES FOR SINGLE-FAMILY HOME OWNERS: Chapter 12 of the Burlington Code of ordinances allows owner occupants of single family homes to do their own wiring if they choose. If you choose to
TP-C2 Motor Operator CLEAVELAND / PRICE INC. Bulletin DB-111B12
Bulletin DB-111B12 TP-C2 Motor Operator CLEAVELAND / PRICE INC. 14000 Rt. 993, Trafford, PA 15085 (724) 864-4177 FAX (724) 864-9040 Email: [email protected] Cleaveland/Price Type TP-C2 Motor Operator
PERFORMANCE TEST REPORT. Rendered to: BAMCO INC. PRODUCT TYPE: ACM Wall Panel Systems
PERFORMANCE TEST REPORT Rendered to: BAMCO INC. PRODUCT TYPE: ACM Wall Panel Systems Summary of Results Title Test Specimen #1 Test Specimen #2 Air Infiltration
Linkeo 19" freestanding cabinets
87045 LIMOGES Cedex France Telephone: (+33) 05 55 06 87 87 - Fax: (+33) 05 55 06 88 88 Linkeo 19" freestanding cabinets Page 1. General characteristics....1 2. Range....2 3. Technical characteristics...3
Screen Enclosure Protect your Screen against: rain, temperature, vandalism damage and theft
Screen Enclosure Protect your Screen against: rain, temperature, vandalism damage and theft When should I use a LCD enclosure? Designed to tolerate outdoor wet and wash down environments an LCD enclosure
A D D E N D U M # 3 QUESTIONS FROM BIDDERS: DATE: November 5, 2012. All Bidders. Jenne dos Santos, CBI Consulting Inc. City of Chelsea, MA
Page 1 of 10, Addendum No. 3 Temporary Garage Structure City of Chelsea, MA November 5, 2012 CBI Job No.: 12055-A A D D E N D U M # 3 DATE: November 5, 2012 TO: FROM: PROJECT: All Bidders Jenne dos Santos,
Aluminium Standard. Technical Data. Included in delivery
luminium Standard UL / cul Robust aluminium enclosure for mechanical engineering and automation technology Fixing options for s and mounting plates Usable in wide temperature area Technical ata aterial:
SPECIFICATIONS FOR BOON EDAM TOMSED MODEL TUT-65TMB
SPECIFICATIONS FOR BOON EDAM TOMSED MODEL TUT-65TMB PRODUCT DESCRIPTION: BOON EDAM TOMSED MODEL TUT-65TMB STAINLESS STEEL BARCODE SCANNING ELECTRONIC REGISTERING TURNSTILE SCOPE OF OPERATION: A. The TUT-65TMB
Scraper Passage Indicator. Electrical Indicator. Features
IV Scraper Passage Indicator Bulletin No: 5110.001.03 Date: June 2008 Cross Indexing No: n/a Supersedes: 5110.001.02 (1/06) Flag Indicator Electrical Indicator Options Description TDW s IV Scraper Passage
SECTION 15140 - PIPE HANGERS AND SUPPORTS
Part I - GENERAL 1.01 SECTION INCLUDES A. The work covered under this section consists of the furnishing of all necessary labor, supervision, materials, equipment, and services to completely execute the
Surgelogic Surge Protective Device (SPD)
Surgelogic Surge Protective Device () EB, EM, and HW Series atalog 1310T0202R05/09 2009 lass 1310 OTETS Description............................................. Page Product Description...........................................2
Screw Plug Immersion Heaters
Immersion Heaters Overview Immersion Heaters consist of hairpin bent tubular elements brazed or welded into a screw plug and provided with terminal enclosures for electrical connections. Immersion Heaters
How To Fit A Portman Door Leaf
Portman Sliding Door Gear Timber/Frames Doors Frameless Glass Doors Top track Portman top tracks are suitable for door leaves of up to 80kg as standard Material is 6063T6 aluminium alloy anodised to 15
P.A.L. S SPECIFICATIONS
PART 1- GENERAL 1.1 SCOPE To furnish all labor, materials and equipment necessary or required to complete the installation of the lift as indicated on the Drawings and Specifications. This specification
SEM Model 23/5 GREEN VALUE KIT Medium / Heavy Duty Disintegrator & Briquettor System
SEM Model 23/5 GREEN VALUE KIT Medium / Heavy Duty Disintegrator & Briquettor System SEM GREEN VALUE KIT bundles your disintegration needs with our ECO-Friendly briquetting system, making the most GREEN
Pump Specifications 250 Series Submersible Sump / Effluent Pump 2 Solids handling
Pump Specifications 250 Series Submersible Sump / Effluent Pump 2 Solids handling 250_P1 R10/7/2015 Copyright 2015 Liberty Pumps Inc. All rights reserved. Specifications subject to change without notice.
Amphenol C 091 A/B/D. Circular Connectors. Amphenol-Tuchel Electronics GmbH
Amphenol C 091 A/B/D Circular Connectors Amphenol-Tuchel Electronics GmbH C 091 A Main Features Metal threaded coupling acc. to IEC. Number of contacts are 2 to 8, 12 and 14. Internal metal strain relief
Direct Gas Fired [Make-Up Air / Displacement Ventilation / Space Heating] System
![Direct Gas Fired [Make-Up Air / Displacement Ventilation / Space Heating] System](/thumbs/27/11831324.jpg "Direct Gas Fired [Make-Up Air / Displacement Ventilation / Space Heating] System")
Section 15622 AA-Series (rev. 04/16/15) Direct Gas Fired [Make-Up Air / Displacement Ventilation / Space Heating] System Note: Optional items and/or items requiring a choice, are shown between brackets
A. Shop Drawing submittals shall include, but not be limited to, the following:
SECTION 26 05 53 IDENTIFICATION FOR ELECTRICAL SYSTEMS PART 1 - GENERAL 1.1 RELATED DOCUMENTS: A. The Conditions of the Contract and applicable requirements of Divisions 0 and 1 and Section 26 00 01, Electrical
Dialight. Vigilant LED High Bay - UL for Indoor and Outdoor Industrial Applications
Dialight Vigilant LED High Bay - UL for Indoor and Outdoor Industrial Applications Vigilant LED High Bay - UL for Indoor and Outdoor Industrial Applications Case Study: Rockline Case Study (Manufacturing)
ELECTRICAL SERVICE REQUIREMENTS FOR MOBILE HOME DEVELOPMENTS
Prepared by: ABB1 ELECTRICAL SERVICE REQUIREMENTS FOR MOBILE HOME DEVELOPMENTS 052521 Asset Type: Electric Metering Function: Construction Issued by: Quoc Hoang (QxH1) Date: 07-01-16 Rev. #06: This document
EDS / EFS Series Control Stations
EDS / EFS Series Control Stations Fully Assembled EFS and EDS Factory Sealed Devices Cl. I, Div. & 2, Groups B*, C, D Cl. II, Div., Groups E, F, G NEMA, 7B*CD, 9EFG Applications: Factory sealed enclosures
FFI. Advances in Medium and Low Voltage Power Distribution ESS Metron Expo and Technical Seminars. Presented By: Greg Pelster & Robert Schmid
Advances in Medium and Low Voltage Power Distribution ESS Metron Expo and Technical Seminars Presented By: Greg Pelster & Robert Schmid FFI Ferrie, Franzmann Industries LOW VOLTAGE SWITCHGEAR & LOW VOLTAGE
TRUCK BOXES - UNDERBODY BOXES
TRUCK BOXES - UNDERBODY BOXES BLACK, STAINLESS STEEL T-HANDLE LATCH 14-gauge steel box, 12-gauge steel door (12-gauge steel box, 12-gauge steel door on 66" toolboxes). Recessed/beveled door. Rain channel
FAIRFIELD INDUSTRIES INC.
FAIRFIELD INDUSTRIES INC. v NEW SCHEDULE 4/1/2011 SUPERSEDES 6/9/08 SPILL CONTAINMENT and STREET ACCESS MANHOLES for UNDERGROUND and ABOVEGROUND TANKS SPILL CONTAINMENT MANHOLES HEAVY DUTY STREET MANHOLES
Sample - No Commercial Use
COMPLETE REVISION October 2010 Electrical PIP ELSSG01 Design and Fabrication of Low-Voltage Metal-Enclosed AC Power Circuit Breaker Switchgear PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort
Invue ECM/EMM EPIC MEDIUM 42-150W
DESCRIPTION The EPIC Collection delivers custom luminaire flexibility with the quality and availability expectations of standard specification grade product. Offered in two housing sizes and hundreds of
DuroSite LED End-to-End Linear Fixture - NSF. for Indoor and Outdoor Industrial Applications
DuroSite LED End-to-End Linear Fixture - NSF for Indoor and Outdoor Industrial Applications On when it matters most. Products and solutions that protect your business 2 www.dialight.com MDEXLINE2ENSFX001_A
Power Outlet Panels. Product Guide
Product Guide Construction and Recreational Vehicle (RV) Power Outlet Panels Vehicle Power (RV) Power Outlet Panels Power Outlet Panels Construction and RV Power Outlet Panels Product Description...1 Application
SECTION 23 81 03 - PACKAGED ROOFTOP AIR CONDITIONING UNITS NON-CUSTOM
SECTION 23 81 03 - PACKAGED ROOFTOP AIR CONDITIONING UNITS NON-CUSTOM PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Packaged rooftop air conditioning unit (5 tons and smaller). 2. Roof curb. 1.2
DuroSite Series LED High Bay for Indoor and Outdoor Industrial Applications. Patent Pending
Patent Pending DuroSite Series LED High Bay for Indoor and Outdoor Industrial Applications DuroSite Series LED High Bay Features & Benefits L70 rated for >100,000 hours @ 25 C ambient 5 year full performance
POINT OBSTRUCTION LIGHTS POL EX LED v5 HAZARDOUS LOCATION
Compliances: Class I, Division 2, Groups A B C D, T5 at -40 deg C to +55 deg C* Class I, Zone 2, Groups IIA IIB+H2 IIC, T5 at -40 deg C to +55 deg C* Certified FAA L-810 by Intertek Testing Service (ETL)
Explosion-Proof Electric Unit Heaters
Type FX4 FX4 Explosion-Proof Electric Air Heaters FX4 heaters are UL listed and/or CSA certified for use in hazardous locations. They are designed for dry indoor industrial applications such as oil refineries,
Static Electricity. A Health and Safety Guideline for Your Workplace. What Are Some Sources of Static Electricity? What is Static Electricity?
A Health and Safety Guideline for Your Workplace What is static electricity? What causes it? How is it hazardous? And, most importantly, how can it be controlled? All of these questions will be answered
Catalog. Vynckier Enclosure Systems. full ENCLOSURE SYSTEMS INC. Table of Contents
Table of Contents 2 Vynckier Enclosure 2013 Systems full Catalog Technical Information 4 VJ Series Enclosures 10 Opaque Cover Enclosures (VJ) 12 Raised Cover Enclosures (RVJ) 14 Clearview Cover Enclosures
SUGGESTED SPECIFICATION for Series 185 Service Entrance Rated Automatic Transfer Switches
SUGGESTED SPECIFICATION for Series 185 Service Entrance Rated Automatic Transfer Switches PART 1 GENERAL 1.01 Scope Optional Standby Power Generator Systems A. Furnish and install automatic transfer switches