Flare Fittings. The World Standard. SAE 45 Flared Fittings... D4. Inverted Flared Fittings... D14. Access Valves... D18
|
|
- Denis Wilkinson
- 8 years ago
- Views:
Transcription
1 Flare Fittings SAE 45 Flared Fittings... 4 Inverted Flared Fittings Access Valves The World Standard
2 Flare Fittings Flare to ale PT 48F ale Connector 481FH ale Connector AVU1 ale Connector 149F/249F ale Elbow 2491FH ale Elbow AVE1 ale Elbow 145F Branch Tee 2591FH 45 ale Elbow 2451FH Branch Tee 256F Adapter Tee Page 8 Page 16 Page 20 Page 9 Page 16 Page 20 AVT1 Branch Tee Flare to Flar lare 151F Run Tee ; ; 42F Union 2511FH Run Tee 421FH Union AVT3 Run Tee AVU2 Union 159F/259F 45 ale Elbow Page 9 Page 16 Page 20 Page 11 Page 17 Page 20 Page F Union Tee 2441FH Union Tee Flare to Femal emale e P PT Flare to etri etric Straigh traight t Threa hread AVT3F1 Run Tee Page 17 Page 12 Page 7 Page 15 Page 19 Page 9 AVTS4 Swivel Run Tee AVT2 Union Tee 46F Female Connector 48F-I ale Connector Swivels AVTS6 Swivel Branch Tee 155F Union Elbow ; ; 461FH Female Connector 149F-I ale Elbow 14FSV Swivel ut Connector Adapters 2551FH Union Elbow AVUR3 Female Connector 159F-I 45 ale Elbow US5 Flare Adapter 1F Refrigerant rum 660FH Flare Union 150F Female Elbow Flare to Straigh traight t Threa hread 166FSV Swivel Elbow 661FH Reducer 147F Cross 2501FH Female Elbow AVU1F1 ale Connector AVCS4 Cross 664FH Female Flare to Pipe AVC1 Cross Page 16 Page 20 Page 11 Page 17 Page 12 Page 9 Page 20 ; ; ; Page 8 Page 15 Page 21 Page 10 Page 17 AVT1F1 Branch Tee Page 8 Page 10 Page 11 Page 20 Page 22 AVUS4 Swivel Connector Page 23 Page 6 Page 6 Page 12 Page 21 Page 21 88AC Refrigerant Adapter Page 21 Page 22 Page 5 Page 13 Page 13 Page 23 2 Parker Brass Products ivision Otsego, ichigan
3 Flare Fittings 880AC Refrigerant Adapter 881AC Refrigerant Adapter Bulkheads AVU2BH Bulkhead Union AVUS3BH Solder Union Flare to Solde older 43F Connector AVUSE Extended Copper Tube 14FSX Short Forged ut Page 23 Page 23 Page 19 Page 19 Page 7 AVTS Solder Tee 14FS Forged Reducing ut AVTS Extended Solder Tee 41F ong ut AVUS3 3 Way Solder 41FS/41FX Short ut AVUS Solder Connector 411F Inverted Flare ut Auxiliary 411FS Inverted Flare ut Steel 14F ong Forged ut Page 19 Page 19 Page 19 Page 21 Page 21 Page 5 411FF Inverted Flare Piloted ut 639F Seal Plug Page 5 Page 6 Page 6 Page 6 Page 15 Page 15 Page F Cap ut 640QSF Seal Cap 640QSFC Seal Cap w/chain 640QSFCR Cap w/ Core Remover 2GF Flare Gasket 3GF Seal Bonnet Page 12 Page 12 Page 22 Page 22 Page 22 Page 5 Page 5 CR Core Remover VC Valve Core Page 22 Page 22 3 Parker Brass Products ivision Otsego, ichigan
4 SAE 45 Flared Fittings Advantages This economical fitting resists mechanical pullout. Can be assembled and disassembled repeatedly. anufactured from CA 360, CA 345 or CA 377 brass. Specifications isted with Underwriter s aboratories for flammable liquid, marine, refrigeration and gas applications. eets functional requirements of SAE J512 and J513, ASA and S (ilitary Standards). Refer to list of U listed fittings on page 8 for specific configurations. Applications Use with copper, brass, aluminum and welded steel hydraulic tubing that can be flared. anufactured especially for hard-to-hold liquids and gases. Working Pressure Ranges Temperature and type of tubing used are important factors. However, the following table is a good guide for proper selection. Temperature 73 F with copper tubing: Temperature Ranges From -65 to +250 F. PSI TUBE TUBE O.. (I.) WA (I.) / / / / / / / / /8.035 Order By part number and name. SAE 45 flared bodies and nuts are separate items. Both numbers must be indicated when ordered. omenclature Part numbers are constructed from symbols that identify the style and size of the fitting. The first series of numbers and letters identifies the style and type fitting. The second series of numbers describes the size. Example: Forging (1) Extrusion (2) Flare to external pipe, 90 elbow Flare fitting 3/8" (6/16) tube O.. size 1/4" (4/16) pipe size 1 49 F 6 4 Sizes Tube sizes are determined by the numbers of sixteenths of an inch in the tube O.. Special Fittings Fitting configurations and/or sizes other than those shown in the catalog can be furnished. It is suggested that a print or sketch be submitted with the inquiry. Special U stamped fittings are available. Please consult price list. Pricing Only items priced in current supplementary price list P3501 are carried in stock. Price and delivery for non-stock items furnished on request for specified quantity. Vibration Short nut may be used when vibration is minimal. The long nut offers additional vibration capacity. Assembly Instructions 1. Cut tubing squarely and clean tube end thoroughly to remove burrs. 2. Place nut onto tube. Place threaded end of nut toward end of tube. 3. Flare tube end with flaring tool to provide 45 flare. 4. Clamp tube flare between nut and nose of fitting body by screwing nut on finger-tight. Tighten with a wrench an additional 1/4 turn for a metal-to-metal seal. Flare fittings are easy to disassemble and may be reassembled repeatedly, for a leak-proof connection. 4 Parker Brass Products ivision Otsego, ichigan
5 45 Flare Fittings Refrigerant rum a Aapter 1F Ref. SAE TUBE PIPE C FOW O.. THREA HEX IA. 1F-4-8 1/4 1/2 1-1/ F /4 3/4 1-1/ F /8 3/4 1-1/ F /2 3/4 1-1/ Gasket Furnished with each 1F adapter Copper Flare Gasket 2GF Ref. SAE TUBE SIZE A 2GF-3 3/ GF-4 1/4.37 2GF-5 5/ GF-6 3/8.56 2GF-8 1/2.67 2GF-10 5/8.78 2GF-12 3/4.97 A Seal Bonnet 3GF Ref. SAE TUBE SIZE A 3GF-3 3/ GF-4 1/4.37 3GF-5 5/ GF-6 3/8.56 3GF-8 1/2.67 3GF-10 5/8.78 3GF-12 3/ A ong Forged ut 14F Ref. SAE TUBE STRAIGHT C SIZE THREA HEX 14F-4 1/4 7/ / F-6 3/8 5/ / F-8 1/2 3/ / F-10 5/8 7/ / Short Forged ut 14FSX Ref. SAE TUBE STRAIGHT C SIZE THREA HEX 14FSX-4 1/4 7/ / FSX-5 5/16 1/ / FSX-6 3/8 5/ / FSX-8 1/2 3/ / FSX-10 5/8 7/ / FSX-12 3/4 1-1/ / Parker Brass Products ivision Otsego, ichigan
6 45 Flare Fittings Short Forged Reducing uts 14FS TUBE STRAIGHT C SIZE THREA HEX 14FS-6-4 3/8 to 1/4 5/ / FS-8-6 1/2 to 3/8 3/ / FS /8 to 1/2 7/ / Swivel ut Valve Connector 14FSV Ref. SAE TUBE STRAIGHT C SIZE THREA HEX 14FSV-4 1/4 7/ / FSV-6 3/8 5/ / FSV-8 1/2 3/ / FSV-10 5/8 7/ / Flare Adapter US5 TUBE STRAIGHT C SIZE THREA HEX US5-4 1/4 7/ / US5-6 3/8 5/ / US5-8 1/2 3/ / US5-10 5/8 7/ / C Hex ong ut 41F Ref. SAE TUBE STRAIGHT C SIZE THREA HEX 41F-2 1/8 5/ / F-3 3/16 3/8-24 7/ F-4 1/4 7/ / F-5 5/16 1/2-20 5/ F-6 3/8 5/8-18 3/ F-8 1/2 3/4-16 7/ F-10 5/8 7/ / F-12 3/4 1-1/ / Short ut 41FS / Shorter ut 41FX Ref. SAE TUBE STRAIGHT C SIZE THREA HEX 41FS-2 1/8 5/ / FS-3 3/16 3/8-24 7/ FS-4 1/4 7/ / FS-5 5/16 1/2-20 5/ FS-6 3/8 5/8-18 3/ FX-6 3/8 5/8-18 3/ FS-7 7/16 11/ / FS-8 1/2 3/4-16 7/ FX-8 1/2 3/4-16 7/ FS-10 5/8 7/ / FX-10 5/8 7/ / FS-12 3/4 1-1/ / FS-14 7/8 1-1/ / Parker Brass Products ivision Otsego, ichigan
7 45 Flare Fittings Reducing uts 41FS TUBE STRAIGHT C SIZE THREA HEX 41FS-6-4 3/8 to 1/4 5/8-18 3/ FS-8-6 1/2 to 3/8 3/4-16 7/ FS /8 to 1/2 7/ / Union 42F Ref. SAE *Thread Protectors TUBE STRAIGHT C SIZE THREA HEX 42F-2 1/8 5/ / F-3 3/16 3/8-24 3/ F-4 1/4 7/ / F-5 5/16 1/2-20 1/ F-6 3/8 5/8-18 5/ F-8 1/2 3/4-16 3/ F-10 5/8 7/8-14 7/ F-12* 3/4 1-1/ / F-14* 7/8 1-1/ / Union Reducers 42F Ref. SAE TUBE 2 TUBE 1 STRAIGHT 2 STRAIGHT C FOW FOW SIZE SIZE THREA THREA HEX IA. 1 IA. 2 42F-6-4 1/4 3/8 7/ /8-18 5/ F-6-5 5/16 3/8 1/2-20 5/8-18 5/ F-8-4 1/4 1/2 7/ /4-16 3/ F-8-6 3/8 1/2 5/8-18 3/4-16 3/ F /8 5/8 5/8-18 7/8-14 7/ F /2 5/8 3/4-16 7/8-14 7/ Flare to Solder 43F Ref. SAE TUBE SOER STRAIGHT C FOW SIZE O THREA HEX IA. 43F-4-4 1/4 1/4 7/ / F-4-5 1/4 5/16 7/ / F-4-6 1/4 3/8 7/ / F-6-4 3/8 1/4 5/8-18 5/ F-6-5 3/8 5/16 5/8-18 5/ F-6-6 3/8 3/8 5/8-18 5/ F-6-8 3/8 1/2 5/8-18 5/ F /8 5/8 5/8-18 3/ F-8-6 1/2 3/8 3/4-16 3/ F-8-8 1/2 1/2 3/4-16 3/ F /2 5/8 3/4-16 3/ F /8 1/2 7/8-14 7/ F /8 5/8 7/8-14 7/ F /8 3/4 7/8-14 7/ F /8 7/8 7/ F /4 3/4 1-1/ / F /4 7/8 1-1/ / Parker Brass Products ivision Otsego, ichigan
8 45 Flare Fittings Female Connector 46F Ref. SAE TUBE PIPE STRAIGHT C FOW SIZE THREA THREA HEX IA. 46F-2-2 1/8 1/8 5/ / F-3-2 3/16 1/8 3/8-24 9/ F-4-2 1/4 1/8 7/ / F-4-4 1/4 1/4 7/ / F-4-6 1/4 3/8 7/ / F-5-2 5/16 1/8 1/2-20 9/ F-5-4 5/16 1/4 1/ / F-6-2 3/8 1/8 5/8-18 5/ F-6-4 3/8 1/4 5/ / F-6-6 3/8 3/8 5/ / F-6-8 3/8 1/2 5/ F-8-4 1/2 1/4 3/4-16 3/ F-8-6 1/2 3/8 3/ / F-8-8 1/2 1/2 3/ F /2 3/4 3/ / F /8 3/8 7/8-14 7/ F /8 1/2 7/ F /8 3/4 7/ / ale Connector 48F Ref. SAE *Thread Protectors TUBE PIPE STRAIGHT C FOW SIZE THREA THREA HEX IA. 48F-2-2 1/8 1/8 5/ / F-3-2 3/16 1/8 3/8-24 7/ F-3-4 3/16 1/4 3/8-24 9/ F-4-2 1/4 1/8 7/ / F-4-4 1/4 1/4 7/ / F-4-6 1/4 3/8 7/ / F-4-8 1/4 1/2 7/ / F-5-2 5/16 1/8 1/2-20 1/ F-5-4 5/16 1/4 1/2-20 9/ F-5-6 5/16 3/8 1/ / F-6-2 3/8 1/8 5/8-18 5/ F-6-4 3/8 1/4 5/8-18 5/ F-6-6 3/8 3/8 5/ / F-6-8 3/8 1/2 5/8-18 7/ F /8 3/4 5/ / F-8-4 1/2 1/4 3/4-16 3/ F-8-6 1/2 3/8 3/4-16 3/ F-8-8 1/2 1/2 3/4-16 7/ F /2 3/4 3/ / F /8 1/4 7/8-14 7/ F /8 3/8 7/8-14 7/ F /8 1/2 7/8-14 7/ F /8 3/4 7/ / F-12-8* 3/4 1/2 1-1/ / F-12-12* 3/4 3/4 1-1/ / F-14-12* 7/8 3/4 1-1/ / Flare to etric Adaptor 48F-X-IX TUBE ETRIC UBER SIZE THREA HEX 48F-8-II6 1/2 16 X 1.5 7/ F-10-I27 5/8 27 x / F-12-I27 3/4 27 x / ote: Viton o-ring is standard Hex Viton O-Ring 8 Parker Brass Products ivision Otsego, ichigan
9 45 Flare Fittings Union Tee 144F-244F Ref. SAE TUBE STRAIGHT FOW SIZE THREA IA. 144F-3 3/16 3/ F-4 1/4 7/ F-4 1/4 7/ F-5 5/16 1/ F-6 3/8 5/ F-8 1/2 3/ F-10 5/8 7/ F 244F Union Tee 144F-244F combination sizes 1 TUBE 2 TUBE 3 TUBE FOW SIZE SIZE SIZE 1 IA. 144F /8 3/8 1/ F /2 1/2 3/ ale Branch Tee 145F Ref. SAE TUBE PIPE STRAIGHT FOW SIZE THREA THREA IA. 145F-2-2 1/8 1/8 5/ F-4-2 1/4 1/8 7/ F-4-4 1/4 1/4 7/ F-5-4 5/16 1/4 1/ F-6-4 3/8 1/4 5/ F-6-6 3/8 3/8 5/ F-6-8 3/8 1/2 5/ F-8-6 1/2 3/8 3/ F-8-8 1/2 1/2 3/ F /8 1/2 7/ Cross 147F Ref. SAE TUBE STRAIGHT FOW SIZE THREA IA. 147F-6 3/8 5/ ale Elbow 149F-249F Ref. SAE *Thread Protectors TUBE PIPE STRAIGHT FOW SIZE THREA THREA IA. 149F-2-2 1/8 1/8 5/ F-3-2 3/16 1/8 3/ F-3-2 3/16 1/8 3/ F-4-2 1/4 1/8 7/ F-4-2 1/4 1/8 7/ F-4-4 1/4 1/4 7/ F-4-4 1/4 1/4 7/ F-4-6 1/4 3/8 7/ F-4-6 1/4 3/8 7/ Continued next page 149F 9 Parker Brass Products ivision Otsego, ichigan
10 45 Flare Fittings ale Elbow 149F-249F Continued from previous page Ref. SAE *Thread Protectors TUBE PIPE STRAIGHT FOW SIZE THREA THREA IA. 149F-5-2 5/16 1/8 1/ F-5-2 5/16 1/8 1/ F-5-4 5/16 1/4 1/ F-5-4 5/16 1/4 1/ F-5-6 5/16 3/8 1/ F-6-2 3/8 1/8 5/ F-6-2 3/8 1/8 5/ F-6-4 3/8 1/4 5/ F-6-4 3/8 1/4 5/ F-6-6 3/8 3/8 5/ F-6-6 3/8 3/8 5/ F-6-8 3/8 1/2 5/ F-6-8 3/8 1/2 5/ F /8 3/4 5/ F-8-4 1/2 1/4 3/ F-8-6 1/2 3/8 3/ F-8-6 1/2 3/8 3/ F-8-8 1/2 1/2 3/ F-8-8 1/2 1/2 3/ F /2 3/4 3/ F /8 3/8 7/ F /8 1/2 7/ F /8 1/2 7/ F /8 3/4 7/ F-12-8* 3/4 1/2 1-1/ F-12-12* 3/4 3/4 1-1/ F /8 3/4 1-1/ F 249F Flare Elbow to etric Adaptor 149F-X-IX TUBE ETRIC UBER SIZE THREA HEX F-10-I27 5/8 27 x 2.0 7/ ote: Viton o-ring is standard Hex Viton O-Ring Female Elbow 150F Ref. SAE TUBE PIPE STRAIGHT FOW TYPE SIZE THREA THREA IA. TYPE 150F-4-2 1/4 1/8 7/ A 150F-4-4 1/4 1/4 7/ A 150F-5-4 5/16 1/4 1/ A 150F-6-2 3/8 1/8 5/ B 150F-6-4 3/8 1/4 5/ A 150F-6-6 3//8 3/8 5/ A 150F-6-8 3/8 1/2 5/ A 150F-8-6 1/2 3/8 3/ A 150F-8-8 1/2 1/2 3/ A 150F /2 3/4 3/ A 150F /8 1/2 7/ A 150F /8 3/4 7/ A ; ; ; Type A Type B 10 Parker Brass Products ivision Otsego, ichigan
11 45 Flare Fittings ale Run Tee 151F Ref. SAE TUBE PIPE STRAIGHT FOW SIZE THREA THREA IA. 151F-4-2 1/4 1/8 7/ F-4-4 1/4 1/4 7/ F-5-4 5/16 1/4 1/ F-6-4 3/8 1/4 5/ F-6-6 3/8 3/8 5/ F-6-8 3/8 1/2 5/ F-8-6 1/2 3/8 3/ F-8-8 1/2 1/2 3/ F /8 1/2 7/ ; ; Union Elbow 155F Ref. SAE *Thread Protectors TUBE STRAIGHT FOW SIZE THREA IA. 155F-2 1/8 5/ F-3 3/16 3/ F-4 1/4 7/ F-5 5/16 1/ F-6 3/8 5/ F-8 1/2 3/ F-10 5/8 7/ F-12* 3/4 1-1/ ; ; 45 Elbow 159F-259F Ref. SAE *Thread Protectors TUBE PIPE STRAIGHT FOW SIZE THREA THREA IA. 159F 159F-4-2 1/4 1/8 7/ F-4-2 1/4 1/8 7/ F-4-4 1/4 1/4 7/ F-4-4 1/4 1/4 7/ F-5-2 5/16 1/8 1/ F-5-4 5/16 1/4 1/ F-6-2 3/8 1/8 5/ F-6-4 3/8 1/4 5/ F-6-4 3/8 1/4 5/ F-6-6 3/8 3/8 5/ F-6-6 3/8 3/8 5/ F-8-4 1/2 1/4 3/ F-8-6 1/2 3/8 3/ F-8-6 1/2 3/8 3/ F-8-8 1/2 1/2 3/ F-8-8 1/2 1/2 3/ F /8 3/8 7/ F /8 3/8 7/ F /8 1/2 7/ F /8 1/2 7/ F-12-8* 3/4 1/2 1-1/ F 45 Flare Elbow to etric Adaptor 159F-X-IX TUBE ETRIC UBER SIZE THREA HEX 1 159F-8-II6 1/2 16 X / F-10-I27 5/8 27 x / ote: Viton o-ring is standard Hex 1 Viton O-Ring 11 Parker Brass Products ivision Otsego, ichigan
12 45 Flare Fittings 90 Swivel Elbow 166FSV TUBE STRAIGHT C FOW SIZE THREA HEX IA. 166FSV-4-4 1/4 7/ / FSV-6-6 3/8 5/ / FSV-8-8 1/2 3/ / FSV /8 7/ / FSV /4 1-1/ / Adapter Tee 256F TUBE PIPE STRAIGHT FOW SIZE THREA THREA 1 IA. 256F-4-2 1/4 1/8 7/ Flared Seal Plug 639F Ref. SAE TUBE STRAIGHT C SIZE THREA HEX 639F-4 1/4 7/ / F-5 5/16 1/2-20 1/ F-6 3/8 5/8-18 5/ F-8 1/2 3/4-16 3/ F-10 5/8 7/8-14 7/ Cap ut 640F Ref. SAE TUBE STRAIGHT C SIZE THREA HEX 640F-3* 3/16 3/8-24 1/ F-4* 1/4 7/ / F-5* 5/16 1/2-20 5/ F-6* 3/8 5/8-18 3/ F-8* 1/2 3/4-16 7/ F-10* 5/8 7/ /16.97 *Should be used with 2GF copper gasket. Flared Union Female Flare to Female Flare 660FH Ref. SAE TUBE STRAIGHT C FOW SIZE THREA HEX IA. 660FH-4* 1/4 7/ / FH-6* 3/8 5/ / FH-8* 1/2 3/ / FH-10* 5/8 7/ / *Should be used with 2GF copper gasket. 12 Parker Brass Products ivision Otsego, ichigan
13 45 Flare Fittings Reducer ale Flare to Female Flare 661FH Ref. SAE TUBE 2 TUBE 1 STRAIGHT 2 STRAIGHT C FOW SIZE SIZE THREA THREA HEX IA. 661FH-4-6* 1/4 3/8 7/ / / FH-4-8* 1/4 1/2 7/ / / FH-6-4* 3/8 1/4 5/8-18 7/ / FH-6-8* 3/8 1/2 5/8-18 3/ / FH-8-6* 1/2 3/8 3/4-16 5/ / FH-8-10* 1/2 5/8 3/4-16 7/ / FH-10-8* 5/8 1/2 7/8-14 3/ / FH-10-12* 5/8 3/4 7/ / / FH-12-10* 3/4 5/8 1-1/ / / *Should be used with 2GF copper gasket. Female Flare to ale Pipe Thread 664FH Ref. SAE TUBE PIPE STRAIGHT C FOW SIZE THREA THREA HEX IA. 664FH-4-2* 1/4 1/8 7/ / FH-4-4* 1/4 1/4 7/ / FH-6-4* 3/8 1/4 5/ / FH-8-6* 1/2 3/8 3/ / *Should be used with 2GF copper flare gasket Parker Brass Products ivision Otsego, ichigan
14 Inverted Flared Fittings Advantages Built to resist mechanical pullout. This economical fitting can be assembled and disassembled repeatedly. Readily available in a broad selection of styles to fill your specific needs. anufactured from CA 360 or CA 345 brass. Specifications isted with Underwriter s aboratories for flammable liquid and gas. eets functional requirements of SAE, J512, ASA and S (ilitary Standards). Refer to list of U listed fittings on page 6 for specific configurations. Applications Use with copper, brass, aluminum and welded steel hydraulic tubing that can be flared. anufactured especially for hard-to-hold liquids and gases. Working Pressure Ranges Temperature and type of tubing used are important factors. However, the following table is a good guide for proper selection. Temperature 73 F with copper tubing: PSI TUBE TUBE O.. (I.) WA (I.) / / / / / / / /4.035 Order By part number and name. Bodies and nuts are separate items and individual part numbers must be indicated when ordered. omenclature Part numbers are constructed from symbols that identify the style and size of the fitting. The first series of numbers and letters identifies the style and type fitting. The second series of numbers describes the size. Example: 48 1F 1FH 4 2 Half Union Inverted Flared (ight uty) Inverted Flared (Heavy uty) 1/4 (4/16) tube O.. 1/8 (2/16) pipe thread Sizes Tube sizes are determined by the numbers of sixteenths of an inch in the tube O.. Special Fittings Fitting configurations and/or sizes other than those shown in the catalog can be furnished. It is suggested that a print or sketch be submitted with the inquiry. Special U stamped fittings are available. Please consult price list. Pricing Only items priced in current supplementary price list P3501 are carried in stock. Price and delivery for non-stock items furnished on request for specified quantity. Temperature Ranges From -65 to +250 F. Vibration Will withstand minimal vibration movements. Assembly Instructions 1. Cut tubing squarely and clean tube end thoroughly to remove burrs. 2. Place nut onto tube. Place threaded end of nut toward end of tube. 3. On thin wall copper, welded or brazed tubing, use double flare to prevent pinch-off or cracked flares. 4. Clamp tube flare between nut and flare seat of body by screwing nut on finger-tight. Tighten with a wrench an additional 1/4 turn for a metal-to-metal seal. ote: The seat dimensions are predicated on practical threading limitations and use of these fittings with double flared tubing. 14 Parker Brass Products ivision Otsego, ichigan
15 Inverted Flare Fittings ut 411F Ref. SAE TUBE STRAIGHT C SIZE THREA HEX 411F-2 1/8 5/ / F-3 3/16 3/8-24 3/ F-4 1/4 7/ / F-5 5/16 1/2-20 1/ F-6 3/8 5/8-18 5/ F-8 1/2 3/4-18 3/ Steel ut Zinc Chromate 411FS Ref. SAE TUBE STRAIGHT C SIZE THREA HEX 411FS-3 3/16 3/8-24 3/ FS-4 1/4 7/ / FS-5 5/16 1/2-20 1/ FS-6 3/8 5/8-18 5/ FS-8 1/2 3/4-18 3/ FS-10 5/8 7/8-18 7/ FS-12 3/4 1-1/ / FS-14 7/8 1-3/ / Piloted ut 411FF for Single Flared Tubing Ref. SAE TUBE STRAIGHT C SIZE THREA HEX 411FF-2 1/8 5/ / FF-3 3/16 3/8-24 3/ FF-4 1/4 7/ / FF-5 5/16 1/2-20 1/ FF-6 3/8 5/8-18 5/ FF-8 1/2 3/4-18 3/ Union 421FH Ref. SAE TUBE STRAIGHT C SIZE THREA HEX 421FH-2 1/8 5/ / FH-3 3/16 3/ / FH-4 1/4 7/ / FH-5 5/16 1/ / FH-6 3/8 5/8-18 3/ FH-8 1/2 3/ / Female Connector 461FH Ref. SAE TUBE PIPE STRAIGHT C FOW SIZE THREA THREA HEX IA. 461FH-3-2 3/16 1/8 3/8-24 1/ FH-4-2 1/4 1/8 7/ / FH-5-2 5/16 1/8 1/ / FH-6-4 3/8 1/4 5/8-18 3/ FH-8-6 1/2 3/8 3/ / Parker Brass Products ivision Otsego, ichigan
16 Inverted Flare Fittings ale Connector 481FH Ref. SAE TUBE PIPE STRAIGHT C FOW SIZE THREA THREA HEX IA. 481FH-2-2 1/8 1/8 5/ / FH-3-2 3/16 1/8 3/ / FH-4-2 1/4 1/8 7/ / FH-4-4 1/4 1/4 7/ / FH-5-2 5/16 1/8 1/ / FH-5-4 5/16 1/4 1/ / FH-6-2 3/8 1/8 5/8-18 3/ FH-6-4 3/8 1/4 5/8-18 3/ FH-6-6 3/8 3/8 5/8-18 3/ FH-8-4 1/2 1/4 3/ / FH-8-6 1/2 3/8 3/ / FH-8-8 1/2 1/2 3/ / FH /8 1/2 7/ / FH /4 3/4 1-1/ / FH /8 3/4 1-3/ / Union Tee 2441FH Ref. SAE TUBE STRAIGHT FOW SIZE THREA IA. 2441FH-3 3/16 3/ FH-4 1/4 7/ FH-5 5/16 1/ FH-6 3/8 5/ FH-8 1/2 3/ ale Branch Tee 2451FH Ref. SAE TUBE PIPE STRAIGHT FOW SIZE THREA THREA IA. 2451FH-4-2 1/4 1/8 7/ FH-6-4 3/8 1/4 5/ ale Elbow 2491FH 2491F Ref. SAE TUBE PIPE STRAIGHT FOW SIZE THREA THREA IA. 2491FH-2-2 1/8 1/8 5/ FH-3-2 3/16 1/8 3/ FH-4-2 1/4 1/8 7/ FH-4-4 1/4 1/4 7/ FH-5-2 5/16 1/8 1/ FH-5-4 5/16 1/4 1/ FH-6-2 3/8 1/8 5/ F-6-4 3/8 1/4 5/ FH-6-4 3/8 1/4 5/ FH-6-6 3/8 3/8 5/ FH-8-4 1/2 1/4 3/ F /2 3/8 3/ FH-8-6 1/2 3/8 3/ FH-8-8 1/2 1/2 3/ FH /8 3/8 7/ FH /8 1/2 7/ FH /8 3/4 1-3/ ight uty Series 16 Parker Brass Products ivision Otsego, ichigan
17 Inverted Flare Fittings Female Elbow 2501FH Ref. SAE TUBE PIPE STRAIGHT FOW SIZE THREA THREA IA. 2501FH-3-2 3/16 1/8 3/ FH-4-2 1/4 1/8 7/ FH-5-2 5/16 1/8 1/ FH-6-4 3/8 1/4 5/ ale Run Tee 2511FH Ref. SAE TUBE PIPE STRAIGHT FOW SIZE THREA THREA 1 IA. 2511FH-3-2 3/16 1/8 3/ FH-5-2 5/16 1/8 1/ FH-6-4 3/8 1/4 5/ Female Branch Tee 2521FH Ref. SAE TUBE PIPE STRAIGHT FOW SIZE THREA THREA IA. 2521FH-5-2 5/16 1/8 1/ FH-6-4 3/8 1/4 5/ Union Elbow 2551FH Ref. SAE TUBE STRAIGHT FOW SIZE THREA IA. 2551FH-4 1/4 7/ Elbow 2591FH Ref. SAE TUBE PIPE STRAIGHT C FOW SIZE THREA THREA HEX IA. 2591FH-3-2 3/16 1/8 3/ / FH-4-2 1/4 1/8 7/ / FH-5-2 5/16 1/8 1/2-20 5/ FH-5-4 5/16 1/4 1/2-20 5/ FH-6-4 3/8 1/4 5/ / FH-8-6 1/2 3/8 3/4-18 7/ FH /8 1/2 7/ / Parker Brass Products ivision Otsego, ichigan
18 Access Valves Advantages Access Valves are designed to offer convenient low cost access ports for Refrigeration service. All Access Valves feature 1/4" SAE male flare access ports and are furnished with a finger tight quick seal cap. For greater flexibility, all Tees and Crosses are machined to receive an access core in all 1/4" SAE flare ends. This allows for 2 or more access connections in one fitting plus greater flexibility in the positioning of the valves. All Access Valves with pipe connections have internal OS solder cups so that these valves may be installed in either of 2 ways. Applications Access Valves may be installed in any position on either high or low side for quick testing, pressure checking, purging or charging. Valve Bodies Straight Access Valve bodies are manufactured from brass rod CA360 or CA345. Shaped Access Valve bodies are manufactured from brass forge rod CA377. All Access Valve bodies are machined in accordance with ARI standard 720. Valve Core Parker valve cores meet ARI standard 720 and are designed for use with all florocarbon refrigerants such as R-12,R-22 and R-502, R-134a and are resistant to oils, alkalies and dilute mineral acids. Working Pressure and Temperature Ranges Up to 500 PSI -20 F to +220 F omenclature Part numbers are constructed from symbols that identify the style and size of the valve. The first series of letters identifies the style and type valve. The second series of numbers describes the size. Example: X AV T1 2 Packaged Access Valve ale Branch Tee 1/8" (2/16) Pipe Thread Sizes Tube sized are determined by the number of sixteenths of an inch in the tube O.. Special Fittings Fitting configurations and/or sizes other than those shown in the catalog can be furnished. It is suggested that a print or sketch be submitted with the inquiry. Pricing Only items priced in current supplementary price list P3501 are carried in stock. Price and delivery for non-stock items furnished on request for specified quantity. Order By part number and name. 18 Parker Brass Products ivision Otsego, ichigan
19 Access Valves Extended Copper Tube AVUSE AVUSE-2 1/8 O.. Tube AVUSE-3 3/16 O.. Tube AVUSE-4 1/4 O.. Tube AVUSE-5 5/16 O.. Tube AVUSE-6 3/8 O.. Tube AVUSE-8 1/2 O.. Tube AVUSE-9 1/8 O.. Tube; Additional steps on body for 3/16, 1/4, 5/16, 3/8 O.. Tube. 3/16, 1/4, or 5/16 Solder Fitting/Swaged Tube. AVUSE-11 3/16 O.. Tube; Additional steps on body for 1/4 or 3/8 Solder Fittings/Swaged Tubes 5/16 O.. Tube. Solder Tee AVTS AVTS-4 AVTS-5 AVTS-6 AVTS-8 1/4 O.. Tube or 3/8 Solder Fitting/Swaged Tube 5/16 O.. Tube or 3/8 Solder Fitting/Swaged Tube 3/8 O.. Tube or 1/2 Solder Fitting/Swaged Tube 1/2 O.. Tube or 5/8 Solder Fitting/Swaged Tube Extended Solder Tee AVTS AVTS-4 AVTS-5 AVTS-6 1/4 O.. Tube/Solder 3/16,1/4 & 5/16 Tube 5/16 O.. Tube/Solder 1/4, 5/16 & 3/8 Tube 3/8 O.. Tube/Solder 5/16, 3/8 & 7/16 Tube Full Union AVU2 AVU2-4 1/4 O.. Flare Tube With Forged Flare ut Bulkhead Union AVU2BH AVU2BH-4 1/4" Bulkhead Access X 1/4" SAE With Forged ut Bulkhead Solder Union AVUS3BH AVUS3BH-4 1/4" Bulkhead Access X 3 Way OS 19 Parker Brass Products ivision Otsego, ichigan
20 Access Valves Forged Union Tee AVT2 AVT2-4 1/4" Access All Ends With 2 Forged Flare uts and One Core and Cap Forged Branch Tee AVT1 AVT1-2 1/8" ale Pipe or 1/4" O.. Solder on Branch x 1/4" Access Both Ends With One Core and Cap AVT1-4 1/4" ale Pipe or 5/16" O.. Solder on Branch x 1/4" Access Both Ends With One Core and Cap ale Connector AVU1 AVU1-2 AVU1-4 1/8" ale Pipe or 1/4" O.. Solder 1/4" ale Pipe or 5/16" O.. Solder Access Valve Assembly AVUIFI AVUIFI-4 7/16-20 SAE Straight thread O-Ring Port ote: Standard o-ring is neoprene. Consult Brass Products ivision for optional o-rings Forged ale Elbow AVE1 AVE1-2 1/8" ale Pipe or 1/4" O.. Solder Forged ale Run Tee AVT3 AVT3-2 AVT3-4 1/8" ale Pipe or 1/4" O.. Solder on Run x 1/4" Access on Run and Branch With One Core and Cap 1/4" ale Pipe or 5/16" O.. Solder on Run x 1/4" Access on Run and Branch With One Core and Cap Forged ale Cross AVC1 AVC1-2 AVC1-4 1/8" ale Pipe or 1/4" O.. Solder x 1/4" Access on all Flare Ends With One Core and Cap 1/4" ale Pipe or 5/16" O.. Solder x 1/4" Access on all Flare Ends With One Core and Cap 20 Parker Brass Products ivision Otsego, ichigan
21 Access Valves Swivel Cross AVCS4-4 AVCS4-4 1/4" Forged Female Flare Swivel With epressor x 1/4" Access on all Flare Ends with One Core and Cap Female Connector AVUR3 AVUR3-4 1/4" Female Flare with Copper Gasket 3 Way Solder Connector AVUS3 AVUS3-40 For 3/16" O.. Tube or 1/4" and 3/8" Solder Fitting/Swaged Tube 9 Way Solder Connector AVUS3 AVUS3-49 For 3/16", 1/4", 5/16", 3/8" or 1/2" O.. Tube. Also Fits 3/16",1/4" and 5/16" Solder Fitting/Swaged Tube or 1/8" Hole ay Be Punched in arger Size Tube Straight Solder Connector AVUS AVUS-42 AVUS-43 AVUS-44 AVUS-45 AVUS-46 1/8" O.. Tube or 1/4" Solder Fitting/Swaged Tube 3/16" O.. Tube or 1/4" Solder Fitting/Swaged Tube 1/4" O.. Tube or 3/8" Solder Fitting/Swaged Tube 5/16" O..Tube or 1/2" Solder Fitting/Swaged Tube 3/8" O.. Tube or 1/2" Solder Fitting/Swaged Tube Swivel Connector AVUS4 AVUS4-4 1/4" Forged Female Flare Swivel ut with epressor Forged Female Run Swivel Tee AVTS4 AVTS4-4 1/4" Female Flare Swivel x 1/4" Access on Both Run and Branch AVTS4-4 1/4" Female Flare Swivel on Run with epressor x 1/4" Access on Both Run and Branch 21 Parker Brass Products ivision Otsego, ichigan
22 Access Valves Forged Female Branch Tee AVTS6 AVTS6-4 1/4" Female Flare Swivel x 1/4" Access on Both Ends AVTS6-4 1/4" Female Flare Swivel on Branch with epressor x 1/ 4" Access on Both Ends Quick Seal Caps 640QSF 640QSF-4 640QSF-6 1/4" SAE Seal Cap with Seal Gasket 3/8" SAE Seal Cap with Seal Gasket Quick Seal Caps 640QSFC 640QSFC-4 1/4" SAE Seal Cap with Chain and Ring Assembly Seal Gasket Quick Seal Cap with Core Remover 640QSFCR 640QSFCR-4 1/4" SAE Seal Cap Core Remover with internal Seal Gasket Core Remover CR CR-001 Standard Core Remover Valve Cores VC VC-001 Replacement Valve Cores For all 1/4" Access Valves Forged ale Straight Thread O-Ring Port ale Branch Tee AVT1F1 AVTIFI-4 1/4" forged male straight thread o-ring port male branch tee 22 Parker Brass Products ivision Otsego, ichigan
23 Access Valves Forged ale Straight Thread O-Ring Port ale Run Tee AVT3F1 AVT3FI-4 1/4" forged male straight thread o-ring port male run tee Refrigerant adapter 88AC 88AC-8-2 1/8" male pipe to SAE J2197 Acme threaded male connector Refrigerant adapter 880AC 880AC-8-4 1/4" female SAE flare to SAE J2197 Acme threaded male connector Refrigerant adapter 881AC 881AC-8-4 1/4" SAE male flare to SAE J2197 Acme threaded female connector 23 Parker Brass Products ivision Otsego, ichigan
24 Access Valves otes 24 Parker Brass Products ivision Otsego, ichigan
Industrial: Flare Fittings
Industria: Fare Fittings SAE 45 Fare Resists echanica Pu-out eets SAE Functiona Requirements Resists Vibration U isted Inverted Fare Stee ut option Economica U isted Access Vaves Finger Tight Quick Sea
More informationHose Clamps & Fittings
All Stainless Steel Marine or Underground Hose Clamps 5/16 HEX HEAD SCREW 60000 SERIES Highly corrosion resistant Use for marine or underground applications Stainless Steel Band, Housing Plated Steel Screw
More information37 JIC Flare (Nuts) 304C (070112) 306 (070118) 318 (070110) Pg. 22-75-160 Bulkhead Locknut (Use with #2700) Pg. 23 Tube Nut (Use with #319)
37 JIC Flare (Nuts) Components Assembled The 37 JIC (Joint Industrial Council) Flare is a reliable, straight thread, single-flare design that is used world-wide. It is popular in many applications and
More informationGAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES
GAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES CONTINENTAL INDUSTRIES ABOUT US THE ULTIMATE CONNECTION Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and is today
More informationCajon VCR Fittings. Flanges, Fittings, & Components. Cajon & Swagelok Fittings. Cajon VCR Fittings. Nuts, Caps, & Plugs. Socket Weld Glands
Cajon VCR Fittings Cajon VCR Fittings Make excellent low-pressure gas connections Ideal for lecture bottle gas cylinders, standard helium checks, and general gas plumbing Withstand bakeout to 58º C (with
More informationGEET Fuel Processor Plans
GEET Fuel Processor Plans This is a greatly simplified Proof of Concept version of the GEET Fuel Processor that just about anyone can build from parts from a local Hardware store in a weekend for very
More informationTransport & Automotive CATALOGUE. March 2011. Customer Service Phone: 1800 777 299 Fax: 1800 065 321 Email:sales@tubefit.com.au. www.tubefit.com.
Transport & Automotive CATALOGUE Customer Service Phone: 1800 777 299 Fax: 1800 065 321 Email:sales@tubefit.com.au March 2011 www.tubefit.com.au Page 1 4 6 9 12 14 16 17 19 20 22 23 24 26 28 29 31 33 Index
More informationAir Conditioning & Refrigeration Master Catalog. Catalog CIC-2003-1/USA April 2003
Air Conditioning & Refrigeration Master Catalog Catalog CIC-2003-1/USA April 2003 Table of Contents Table of Contents Service Valves Frontseating Valves... page 115 RB01 Series Ball Valves... page 117
More informationASSEMBLY INSTRUCTIONS ACCORDING TO SAE J1453 FOR FLARED TUBES. 5. Clean properly with appropriate products the part of the tube to be flared.
ASSEMBLY INSTRUCTIONS ACCORDING TO SAE J1453 FOR FLARED TUBES 1. Before to start to flare the tube check for the correct parameters of all the tools to be used and substitute 2. Cut the tube at a 90 angle
More informationDouble-Headed Screw 1. 3/4" FIP x 3/4" MIP x 1/4" hole 2. 3/4" Fip x 3/4" MIP. Feed Water Connector 1. 1/2" FIP x 1/2" MIP x 1/4" OD 2. 3.
Picture Item No. Description RO- 0010 Brass Water Feed 1. 3/4" FIP with 1/4" hole 2. Using on R.O. tank RO- O020 Double-Headed Screw 1. 3/4" FIP x 3/4" MIP x 1/4" hole 2. 3/4" Fip x 3/4" MIP RO- 0030 Brass
More informationPipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).
Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)
More informationTY-FLO Needle Valves
Design/Features Hard (Vee) or Delrin Soft Seat/Tip Orifice sizes from.17 to.438 in. Flow Coefficients (C V ) from.37 to.7 Straight or angle flow patterns Optional panel mount Handle options available Non-wetted
More informationFUEL SYSTEMS OUR PARTS PUT YOU IN THE PASSING LANE. Protect your fuel system. velvac.com
OUR PARTS PUT YOU IN THE PASSING LANE FUEL SYSTEMS Protect your fuel system. Velvac offers a wide range of locking fuel caps and anti-siphon tubes to keep unlawful occurances at bay. With OEM approved
More information3. SEISCO PARTS & SERVICE REMOVAL AND REPAIR GUIDE
4 3. SEISCO PARTS & SERVICE REMOVAL AND REPAIR GUIDE A. Changing the Control Board B. Replacing a Heating Element C. Thermistor Replacement D. High Limit Switch Replacement E. Level Detector Replacement
More informationPipe Valves, Fittings and Nipples Pressures to 15,200 psi
Pipe Valves, Fittings and Nipples MAXIMATOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality and reliability, backed by
More informationVALVES FOR REFRIGERATING SYSTEMS
VALVES FOR REFRIGERATING SYSTEMS FROM QUALITY OUR NATURAL DEVELOPMENT Achieved the goal of fi fty years working in the industry of Refrigeration and Air Conditioning, Castel Quality Range of Products is
More informationSERIES ASM NEOPRENE/EPMD FLANGED SINGLE SPHERE CONNECTOR CONNECTORS. Pressures to 225 PSIG (15.51 barg) Temperatures to 230ºF (110ºC)
APPLICATIONS Process Industry Weak Acids Alkalies Compressed Air Pulp & Paper MODELS ASM - Flanged Connection OPTIONS Control Rods Oil & Gas Water & Waste Pump suction & discharge Sea water Chemical lines
More informationSERVICE PARTS LIST AND ASSEMBLY INSTRUCTIONS
T-352PL Manual SERVICE PARTS LIST AND ASSEMBLY INSTRUCTIONS for FlexCLIK Hose & Fittings T-352PL REV. 11/2012 2012 Mobile Climate Control TABLE OF CONTENTS 1 INTRODUCTION... ii 2 ORDERING INSTRUCTIONS...
More informationStainless Steel Single and Dual Circulation Kits
Instruction Sheet P/N 160780 01 Stainless Steel Single and Dual Circulation Kits Introduction The single and dual high-pressure circulation kits allow you to vary and control the circulation rate of coating
More informationMACHINES RECOVERY SYSTEMS SUPEREVAC CHARGING HOSES VACUUM AND HOSE ADAPTERS, VALVES AND PARTS CHARGING SYSTEMS GAUGES INSTRUMENTS ELECTRONIC
RECOVERY SUPEREVAC 29 RECOVERY 1/4" 4-IN-1 BALL VALVE TOOL For vacuum, charge, cores and recovery 18997 18975 18971 18978 18979 Remove and replace Schrader cores without losing charge. Extra 1/4" side
More informationGYROLOK to Tube Union
GYROLOK HOKE manufactured GYROLOK tube fittings have been carefully designed and manufactured to provide a wide range of outstanding leak-tight application capabilities. GYROLOK to Tube Union MANUFACTURED
More informationHose and Tube Fittings Series 1-3
Embracing Challenge Hose and Tube Fittings Series 1-3 out of plastics PP, PVDF, PTFE Series 1 Special Features Corrosion resistant Gas tight Easy to handle Different connection threads Application Hose
More informationCopper Meter Resetters
Copper Meter Resetters To Set 5/8", 5/8" x 3/4", 3/4", 1", 1 1 2" & 2" Water Meters 11/12 Table of Contents Page Page Meter Resetters 5/8", 5/8" x 3/4", 3/4", & 1" Horizontal Inlet and Outlet Series 710
More informationVe-Lock manufactures Needle Valves from Solid bar stock Materials & all parts details are as below:
Needle Valves : - Needle valves have a slender, tapered point at the end of the valve stem that is lowered through the seat to restrict or block flow. Fluid flowing through the Needle valve turns 90 degrees
More informationRated Burst Pressure 200 Series: 2.5 : 1 H200 Series: 4 : 1
200 Series 0 to 3000 psig heck Valves H200 Series 0 to 6000 psig heck Valves Features & enefits Quick opening/positive closing Provides a wide range of adaptability Large flow capacity The patented sealing
More informationCopper and Copper Alloy Tube, Pipe and Fittings
Copper and Copper Alloy Tube, Pipe and Fittings COPPER and COPPER ALLOY TUBE and PIPE Seamless Copper Pipe: Copper pipe is almost pure copper manufactured to the requirements of ASTM B 42 - Standard Specification
More informationFittings, Tubing & Nipples
s, Tubing & Nipples P Series Pipe s s to 15,000 psi (1034 bar) Since 1945 Parker utoclave Engineers has designed and built premium quality valves, fittings and tubing. This commitment to engineering and
More informationPRODUCT CATALOGUE. burnettandhillman.co.uk &HYDRAULIC ADAPTORS. Burnett & Hillman Havyat Road, Wrington, Bristol BS40 5AE United Kingdom
burnettandhillman.co.uk 2014 HYDRAULIC ADAPTORS Burnett Hillman Havyat Road, Wrington, Bristol BS40 5AE United Kingdom PRODUCT CATALOGUE T: +44 (0)1934 862596 F: +44 (0)1934 862616 E: sales@burnettandhillman.co.uk
More information8D.1 BALL ANGLE METER VALVES - 3/4" & 1" P-24258 B-24258 E-24259 B-24259 B-24266 B-24267
BALL ANGLE METER VALVES - 3/4" & " 8D. B-24258 MUELLER 300 Ball Angle Meter Valve MUELLER 0 Conductive Compression Connection for CTS O.D.* tubing x meter swivel nut** adding -3 suffix to catalog number.
More informationHYDRAULIC PIPING STANDARD HANDBOOK. Revision 1
HYDRAULIC PIPING STANDARD HANDBOOK Revision 1 Preface We aim to fill a gap in technical literature. At this moment there are no hydraulic piping standards available which cover different pressure classes
More information800-348-8467 www.fittingsunlimited.com
Thread and Port Identification Guide 800-348-8467 www.fittingsunlimited.com INDEX Index... 1 Explanation of Symbols... 2 How to Measure Threads... 3-4 Metric vs English Threads... 5 North American Connections
More informationAMERICAN Mechanical Joint Pipe For Water, Sewage or Other Liquids
AMERICAN Mechanical Joint Pipe For Water, Sewage or Other Liquids The AMERICAN Mechanical Joint was developed by the American Cast Iron Pipe Company and first marketed in 1929. Since that time, millions
More informationHigh Pressure Equipment High Pressure Valves, Fittings and Tubing
igh quipment igh Valves, ittings and Tubing 0,000, 40,000 and psi service igh quipment Company has developed a line of igh products to assure safe and easy plumbing for 0,000, 40,000 and psi. These needle
More informationComplete Systems & Parts Automatic Oiler & Grease Bank
MADE IN THE USA Complete Systems & Parts Automatic Oiler & Grease Bank www.gosuburban.com 2 Lubrication Systems Lubrication Systems, a division of Suburban Manufacturing, manufactures a complete line of
More informationMueller B-101 and A-3 Drilling and Tapping Machines
TM TM Mueller and Drilling and Tapping Machines A guide to selecting Mueller Equipment Mueller TM TM and Drilling and Tapping Machines When it comes to line stopping and drilling and tapping technology
More informationWorking with Copper Tubing
This sample chapter is for review purposes only. opyright The Goodheart-Willcox o., Inc. ll rights reserved. Objectives fter studying this chapter, you will be able to: Identify types and sizes of copper
More informationCOPPER METER SETTERS 6-08. A.Y. McDONALD MFG. CO. WATER SERVICE PRODUCTS. TO SET 5/8", 5/8" X 3/4", 3/4", 1", 1 1/2", and 2" Water Meters
COPPER METER SETTERS TO SET 5/8", 5/8" X 3/4", 3/4", 1", 1 1/2", and 2" Water Meters A.Y. McDONALD MFG. CO. WATER SERVICE PRODUCTS 608 A.Y. M c Donald Mfg. Co. is pleased to present its extensive line
More informationTrouble shooting guide
guide DPR/PSR Leak Insuffi ciently tightened, shallow bite Tighten the nut according to correct number of turns, direct assembly only for maintanance/repair, use of recommended pre-assembly machines Mark
More informationBRAZE PERMANENT FITTING
BRAZE PERMANENT FITTING DESIGN CONCEPT: Airdrome Precision Components, was a licensee of Douglas Aircraft Co. (prior to become Boeing Co.) for manufacturing Cres fittings commencing with DC-10 aircraft,
More informationWorking Pressure - Hose Ends
Working Pressure - Hose Ends The maximum dynamic working pressure of a hose assembly is the lesser of the rated working pressure of the hose and the end connection used. HIGH SPECIALTY HOSE ACCESSORRIES
More informationIndustrial Pipe Fittings and Adapters The Fitting Authority
Industrial Pipe Fittings and Adapters The Fitting Authority Visual Index CR Male Pipe Elbow FF Pipe Nipple FFF Long Pipe Nipple RRS Male Pipe Tee DD Female Pipe Elbow Industrial Pipe Fittings DD45 Female
More informationInstallation, Operation and Maintenance Manual for Pilot Operated Valves
Installation, Operation and Maintenance Manual for Pilot Operated Valves Models 1400, 1420, 1430, 1460 IOM1400.0 January 2, 2014 REV A 12393 REF. ID 98136 IOM1400.0 REV. A 12541 TABLE OF CONTENTS DESCRIPTION
More informationHOW TO ORDER SAFETY PRODUCTS/SAFETY CONTROL SYSTEMS ELECTRICAL SAFETY CONTROLS
HOW TO ORDER SAFETY PRODUCTS/SAFETY CONTROL SYSTEMS PNEUMATIC SAFETY CONTROLS BASIC CONTROLS SC3000 - SELF CONTAINED 2 HAND CONTROL - STAND ALONE MODEL SC3300 - SELF CONTAINED 2 HAND CONTROL - PRESS READY
More informationDESIGN STANDARDS SECTION 23 60 00
PART 1 - GENERAL 1.01 Work included: A. Piping, tubing and fittings. B. Piping specialties. C. Special duty valves. D. Refrigerants. E. Chillers. F. Refrigerant monitors. 1.02 General requirements: A.
More informationPARTS LIST T30 MODEL 2545 TWO STAGE INDUSTRIAL AIR COMPRESSOR
Ingersoll-Rand Company 800-B Beaty Street P. O. Box 1803 Davidson, NC 28036 1-800-AIR-SERV (1-800-247-7378) www.air.ingersoll-rand.com PARTS LIST T30 MODEL 2545 TWO STAGE INDUSTRIAL AIR COMPRESSOR Ingersoll-Rand
More informationSelf Purging Liquid Trap (SPLT ) User s Manual
Self Purging Liquid Trap (SPLT ) User s Manual High pressure liquids and gases are potentially hazardous. Energy stored in these liquids and gases can be released unexpectedly and with extreme force. High
More informationParts Manual. TWIN 2 & 3 Parts & Accessories F210846R01. Your efficiency is our Challenge!
Parts Manual TWIN 2 & 3 Parts & Accessories F210846R01 Your efficiency is our Challenge! All rights reserved. No part of this manual may be copied and/or published by means of printing, photocopying, microfilm
More informationDRAFT 1 PIPE & PORT 4-28-06
JI Fittings DRAFT PIPE & PORT 4-8-06 The Fitting Authority 4300 Catalog JI Fittings F3T4 BPT / 30 Flare PNMT4 FNMT4 Cap V3T4 BPT / 30 Flare C3T4 BPT / 30 Flare 30 Flare F3P4 BPT / 60 Cone P4 Union G3P4
More informationYELLOW JACKET Hose Adapters, Valves, and Parts right to the last detail
YELLOW JACKET Hose Adapters, Valves, and Parts right to the last detail NEW Valve core tool page 35 EXPANDED LINE Quick couplers page 36 33 1/4" 4-IN-1 BALL VALVE TOOL for vacuum, charge, cores and recovery
More informationChief S21M PARTS MANUAL. 2005 Chief Automotive Technologies
Chief SM 00 Chief Automotive Technologies Chief s Limited One-Year Warranty & Liability CHIEF'S LIMITED ONE-YEAR WARRANTY & LIABILITY Chief Automotive Technologies, Inc. warrants for one year from date
More informationTelescoping Post Indicator Wall Post KENNEDY VALVE ISO 9000 ISO 14001
Telescoping Post Indicator Wall Post KENNEDY VALVE ISO 9000 ISO 14001 Telescoping Post Indicator 2945 A 1" SQUARE STEM 9" MAX. = 10" MIN. = 7" FIELD ADJUSTMENT INSTRUCTIONS 1. Remove the top section from
More informationApplication Feature Valve Nominal Liquid Capacity R-22 (in tons)*
EMERSON CLIMATE TECHNOLOGIES-Solenoid Valves & Coils Quick Select Guide Applications Application Feature Valve Nominal Liquid Capacity R-22 (in tons)* Nominal Liquid Capacity R-410A (in tons)* Liquid Line
More informationINSTRUCTIONS AND PARTS LIST FOR MODEL 70H & 75H HAND-OPERATED HYDRAULIC PRESS
INSTRUCTIONS AND PARTS LIST FOR MODEL 70H & 75H HAND-OPERATED HYDRAULIC PRESS SETTING UP THE PRESS FOR OPERATION For shipping convenience, the gauge, pump handle, hoist crank, screw nose and base angles
More informationDARTMOUTH COLLEGE DESIGN January 3, 2012 & CONSTRUCTION GUIDELINES
SECTION 15062 STEAM AND CONDENSATE PIPING PART 1 DESIGN DIRECTIVES 1.1 QUALITY ASSURANCE A. Comply with the provisions of the following: 1.2 DESIGN CRITERIA 1. ASME B 31.9 Building Services Piping : for
More informationNewloc Acetal. Plastic Push-to-Connect Fittings. Fluid Transfer Specialists
Newloc Acetal Plastic Push-to-Connect Fittings Fluid Transfer Specialists Newloc Acetal Extremely easy to install no tools necessary Certified by the National Sanitation Foundation (NSF-1 and NSF-1) Instant
More informationChar-Lynn Hydraulic Motor. Repair Information. 10 000 Series. October, 1997
Char-Lynn Hydraulic Motor October, 1997 Repair Information Geroler Motor Two Speed 001 27 Retainer inside bore of valve plate bearingless motors only 4 15 16 3 6 35 Parts Drawing 25 2 2 1 19 17 36 40 47
More informationFITTINGS 5-01. 82A series Aluminium (light weight) compression fittings Ø 6... 42 mm tube size, BSPP and BSPT thread
FITTINS 82 series luminium (light weight) compression fittings Ø 6... 42 mm tube size, SPP and SPT thread 82 series rass compression fittings Ø 6... 42 mm tube size, SPP and SPT thread 83 series luminium
More informationThese features have made Lo Torc valves the choice of high pressure plug value users, worldwide:
LO TORC Plug Valve The high value, dependable performance, and low maintenance requirements of Halliburton Lo Torc valves can help reduce overall operating costs and help cut downtime. These features have
More informationFixtures - Parts - Accessories to shampoo bowls
Page 1??? - For what brand of bowl do you need parts??? Find out by looking on the bottom of the bowl, between the front and strainer, where molded in the bottom is the brand and model number. For example,
More informationTAMPERS. 9949 Tabor Place, Santa Fe Springs, California, CA 90670, U.S.A.
TAMPERS Website: www.apt-tools.com e-mail: info@apt-tools.com TDS-1064 Rev A S TOOL MAINTENANCE & REPAIR INFORMATION FIELD OPERATION: Before use: 1. Check the tamping butt lock screw, it must be tightened
More informationMÁQUINAS AGRÍCOLAS JACTO S.A. EDITION
AJ English version EDITION - 06/007 CODE - 9790 Parts catalog MÁQUINAS AGRÍCOLAS JACTO S.A. Rua Dr. Luiz Miranda, 650 7580-000 - Pompéia - SP - Brasil Tel.: +55 4 3405-00 - Fax: +55 4 345 306 E-mail: export@jacto.com.br
More informationREPAIR AND MAINTENANCE MANUAL
REPAIR AND MAINTENANCE MANUAL Professional Pest Control Application Equipment Prime Line Sprayers B&G Equipment Company 135 Region South Drive, Jackson, GA 30233 800.544.8811 Phone 678.688.5601 Fax 678.688.5633
More informationNITROUS TRANSFER PUMP INSTRUCTIONS
NITROUS TRANSFER PUMP INSTRUCTIONS SAFETY TIPS Never directly inhale nitrous oxide. When inhaled in large quantities, nitrous oxide can cause respiratory ailments or in extreme cases, death by suffocation.
More informationBETTIS CONVERSION INSTRUCTIONS TO CONVERT HD SERIES ACTUATORS TO HD-M3, HD-SR-M3 HD-M3HW OR HD-SR-M3HW SERIES PNEUMATIC ACTUATORS
BETTIS CONVERSION INSTRUCTIONS TO CONVERT HD SERIES ACTUATORS TO HD-M3, HD-SR-M3 HD-M3HW OR HD-SR-M3HW SERIES PNEUMATIC ACTUATORS PART NUMBER: 132581 REVISION: A RELEASE DATE: 24 March 2000 Page 1 of 10
More informationThe One Stop Shop for Automotive Tubes and Hoses
BQAP-1013 INNOVATIVE SOLUTIONS FOR AUTOMOTIVE TUBES AND HOSES The One Stop Shop for Automotive Tubes and Hoses AUTOMOTIVE PLUMBING Catalog $2.00 USA Lab Tested - Tuff! www.brakequip.com Table of Contents
More informationMikrotherm. Manual radiator valves. To be precise.
Manual radiator valves To be precise. Description HEIMEIER Mikrotherm manual radiator valves made of corrosion-resistant gunmetal, with white plastic hand wheel cap, tight-packed with protection film.
More informationOPERATING and MAINTENANCE MANUAL SERIES 2700A CONTROL VALVE CONTENTS. INTRODUCTION...1 Scope...1 Description...1 Valve Identification...
OPERATING and MAINTENANCE MANUAL SERIES 2700A CONTROL VALVE CONTENTS INTRODUCTION...1 Scope...1 Description...1 Valve Identification...2 1.0 VALVE INSTALLATION...2 2.0 VALVE MAINTENANCE...3 Actuator Disassembly...3
More informationSeries 30000 Hose Reels
Operating Instructions and Parts List for Series 30000 Hose Reels - MANUAL DRIVEN - - POWER DRIVEN - SAFETY PRECAUTIONS Personal injury and/or equipment damage may result if proper safety precautions are
More informationTable of Contents. Overview 1. Pump Disassembly 2. Control Disassembly / Reassembly 7. Pump Reassembly 13. Adjustment Procedures DR Control 19
Table of Contents Overview 1 Pump Disassembly 2 Control Disassembly / Reassembly 7 Pump Reassembly 13 Adjustment Procedures DR Control 19 Adjustment Procedures DRG Control 20 Adjustment Procedures DFR
More informationSubmersion/Insertion Toroidal Sensor
Instruction Sheet PN 51A-228/rev.P December 2010 Model 228 Submersion/Insertion Toroidal Sensor For additional information, please visit our website at www.emersonprocess.com/raihome/liquid/. CAUTION SENSOR/PROCESS
More informationTemperature Adaptor. Vacuum Tree
Temperature Adaptor Temperature Adaptor Temperature Adaptor B0N Ford XY on 6 cyl B02N Ford XF on 6 cyl B0N Ford XE-XF 6 cyl B0N Ford 20 Eng. Tree of 2 BN Ford 20 Eng. Tree of BP Ford 20 Eng. Tree of Water
More informationUniversal Installation and Maintenance Instructions Double Wall Spill Containment Bucket (5 and 15 gal)
Universal Installation and Maintenance Instructions Double Wall Spill Containment Bucket (5 and 15 gal) IMPORTANT: It is imperative that the user read these warnings and use of the assembly instructions
More informationInstallation Instructions
Installation Instructions S50-310 (Semi-Circular) S50-311 (Circular) Accu-Zone Infrared Control Conversion Kit for Terrazzo & Stainless Steel Classic Washfountains (Non-sectional) Table of Contents Pre-Installation
More informationHome. News. Products. Contact Us. Treated Swagelok Fittings--for better inertness!
New GC Accessories New GC Accessories New GC Accessories Fittings: Swagelok : Home Brass & Stainless Steel News Also available: Products Silco Fittings : Siltek & Sulfinert Also available: Info & Support
More information3 WAY (3/2) POPPET VALVES FOR AIR AND VACUUM SERVICE SOLENOID OR AIR ACTUATED BROCHURE N-223
3 WAY (3/2) POPPET VALVES FOR AIR AND VACUUM SERVICE SOLENOID OR AIR ACTUATED BROCHURE N-223 HERION S HIGH PERFORMANCE POPPET VALVES For those applications requiring high Cv, fast response times, large
More informationSporlan V-Series Ruby Seat Solenoid Valves
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Sporlan V-Series Ruby Seat Solenoid Valves RACE Catalogue 30-10-8 UK,
More informationwith installation dynafact boost GAUGE this manual is for use with systems 64050-64054
owners manual with installation instructions dynafact boost GAUGE this manual is for use with systems 64050-64054 GENERAL INSTALLATION PRACTICES This manual is an installation guide for all 1. Banks DynaFact
More informationEUROPEAN OEM SERVICE STAUFF. STAUFF - Line - Local solutions for individual customers worldwide
EUROPEAN OEM SERVICE STAUFF STAUFF - Line - Local solutions for individual customers worldwide STAUFF - Line - Experienced staff and precision machinery enable the manufacture of high-quality hydraulic
More informationMODEL 565E - 22 TON AIR/HYDRAULIC AXLE JACK
1 565AKHU HYDRAULIC 1.22 O-RING - 2 REQUIRED UNIT 1.23 O-RING COMPLETE 1.24 TEFLON O-RING 2 REQUIRED 1.3 EXTENSION SCREW 1.3A SPRING PIN 1.4 SPRING SUPPORT 1.5 SCREW BUSHING 1.6 Y SHAPE SEAL RING 1.7 HEAD
More informationINSTALLATION INSTRUCTIONS MK-8704
INSTALLATION INSTRUCTIONS MK-8704 EXPOSED MACKINTOSH THERMOSTATIC MIXING VALVE WITH RISER KIT, HANDSET, LEVER DIVERTER, 8 ROSE AND ADJUSTABLE RISER PIPE BRACKET. Dimensions in Inches (& Millimetres) 1
More informationV46 Pressure-Actuated Water-Regulating Valve
V46 Pressure-Actuated Water-Regulating Valve Product Bulletin Code No. LIT-125687 Issued August 9, 2010 Supersedes October 1, 1995 The V46 pressure-actuated modulating valves come in two types of control
More informationDive Rite 200 & 300 Bar Isolator Manifold Service Manual
Dive Rite 200 & 300 Bar Isolator Manifold Service Manual Principal Photography and Text by Pete Nawrocky Copyright 2003 Lamartek Inc. D/B/A Dive Rite 0 Warning This manual is only to be used as a guide
More informationRound Housing with Side Ports
Power Steering Steering Control Unit (SCU) Parts and Repair Information 5 Series Steering Control Units 001 Square Housing with Side Ports Round Housing with Side Ports T E L RP Round Housing with End
More informationLimit Switches/ Receptacle Assembly... For Nuclear Environments
180-302/402 Series Inside ontainment reas TM Limit Switches/ Receptacle ssembly... or Nuclear nvironments eatures: Qualified to I s 344-1975, 323-1974, and 382-1972. Manufactured to a quality assurance
More informationTYPE E Main Valve Sizes 3 /8 through 12
SD 3001F PRINTED IN U.S.A. SD 3001F/0707 A B TYPE E MAIN VALVE C D E TYPE E Main Valve Sizes 3 /8 through 12 The Spence Type E Main Valve is of normally closed, single seat design featuring packless construction,
More informationrelief valves 500 Series Adjustable Popoff & Inline Relief Valves 0.5 to 150 psig (10 bar)
Adjustable Popoff & Inline Relief Valves 0.5 to 150 psig (10 bar) How it Works Closed Resilient seal design prevents leakage. Sealing efficiency increase with increased pressure up to cracking pressure.
More informationInstallation Instructions 4508 4508S
SYMPHONY Spread Lavatory Faucet with Speed Connect Drain Congratulations on purchasing your American Standard faucet with Speed Connect drain, a feature found only on American Standard faucets. Speed Connect
More informationHYDRAULIC TABLE CART 500-LB.
HYDRAULIC TABLE CART 500-LB. OWNER S MANUAL WARNING: Read carefully and understand all MACHINE ADJUSTMENT AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic
More informationhttp://waterheatertimer.org/troubleshoot-rheem-tankless-water-heater.html
http://waterheatertimer.org/troubleshoot-rheem-tankless-water-heater.html TECHNICAL SERVICE DEPARTMENT Removal, Cleaning, & Reinstallation of the Burner Assembly For models 74 & GT199 Required tools -
More informationSeries M Applicable Tubing: ø2 Connection Thread: M3, M5
iniature Fittings Series pplicable Tubing: ø2 onnection Thread:, RoHS ade to Order (Refer to page for details.) pplicable O.D. x I.D.: ø2 x ø.2 onnection thread: / One-touch fitting size: ø.2 / ø Tubing
More informationVOYAGER 570G. 744A Sprayer Control
VOYAGER 570G 744A Sprayer Control U S E R M A N U A L U S E R M A N U A L Table of Contents CHAPTER 1 - INTRODUCTION...1 SYSTEM CONFIGURATIONS...1 KIT CONTENTS...3 CONTROL HOUSING ASSEMBLY...5 CHAPTER
More informationOcean Engineering Technical Data Sheet Stuffing Tubes
Ocean Engineering Technical Data Sheet Stuffing Tubes Stuffing tubes are devices used to allow a wire or cable to pass through a wall or bulkhead and protect components from the outside environment. Many
More informationMorrison Bros. Co. General Product Specifications
Morrison Bros. Co. General Product Specifications Tank Mounted Spillbox The spill containment device is manufactured to contain spills and drips that may occur at the fill point on aboveground storage
More informationBNC, N, TNC Connectors
BNC, N, TNC Connectors ONLINE CATALOG AEP BNC, N, and TNC series connectors are specifically designed for use with miniature flexible and semi-rigid cable. They are available with goldplated or nickel-plated
More informationHow To Make A Power Supply From A Water Pump To A Water Pipe
EFIGEATION VALVE AND COMPONENT CATALOG Copyright 2008 www.refsales.com COMPANY POFILE efrigeration ales inc now in its third generation as a family owned business It was founded in 1968 and has been a
More informationInstaller s Guide 18-AH39D1-13
18-AH39D1-13 Cased Aluminum "Convertible" Coils 4TXCA018BC3HC** 4TXCA024BC3HC** 4TXCB025BC3HC** 4TXCB026BC3HC** 4TXCB031BC3HC** 4TXCB032BC3HC** ALL phases of this installation must comply with NATIONAL,
More informationInstallation Instructions 6028.801
DAZZLE Installation Instructions 08.80 Spread Lavatory Faucet with Speed Connect Drain* Congratulations on purchasing your American Standard faucet with Speed Connect drain, a feature found only on American
More informationA New Improved Range of Push-fit Fittings for Cold Water Services
A New Improved Range of Push-fit Fittings for Cold Water Services A new improved range of Push-fit Fittings for Cold Water Services, with Stainless Steel Teeth to grip the pipe Push-fit Fittings for Cold
More informationHydraulic Compressor Module
Down Force Circuit 3/8 PTC Ports Hydraulic Compressor Module (Top 2 Shown With Plugs) Lift Force Circuit Tank Drain (Pull Cord) 10 Gallon Air Tank Down Pressure Gauge Lift Pressure Gauge 3/8 Quick-Connect
More informationUni-Quick Duct System. Moveable. Uni-Quick. Duct System. DUST COLLECTION and MATERIAL HANDLING APPLICATIONS a McGill AirFlow product
United McGill products Uni-Quick TM An enterprise of United McGill Corporation Family owned and operated since 1951 Moveable Duct System DUST COLLECTION and MATERIAL HANDLING APPLICATIONS a McGill AirFlow
More information