Operating Instructins Page 1/6 HS2/Bx Bster fr 1/2/4 Valves Operating Instructins Fast Switching f 1..4 Magnet Valves Simple Supply with 24 VDC Munts n 35 mm DIN Rail Lw Cst Device Cnnectins n Spring Frce Clamps Status Indicatin with LED Variants: HS2/B2 N. 79-0000-0006-01 fr 2 Valve Magnets HS2/B3 N. 79-0000-0006-02 fr 4 Valve Magnets Cnnectins / plugs: See technical data. Hartmann+Lämmle GmbH+C.KG Schuckertstraße 15 D-71277 Rutesheim Tel.: +49-7152-992-3 Fax: +49-7152-992-400 e-mail: hl@hl-hydraulic.cm Reserved t change Hartmann+Lämmle GmbH+C.KG Schuckertstraße 15 D-71277 Rutesheim fn: +49-7152-992-3 fax: -400 inf@hl-hydraulic.cm
Operating Instructins Page 2/6 Cntents 1. General Infrmatin... 2 2. Revisins... 3 3. Delivery... 3 4. Accessries... 3 5. Overview... 3 6. Setup... 3 7. Pwer Supply and Fusing... 3 8. Operatin... 4 8.1 Cnnectins... 5 9. Technical Data... 6 10. Dimensins... 6 1. General Infrmatin The intended applicatin f the device is described in this dcument and must be bserved. Cntact manufacturer / supplier fr different applicatins. Installatin, cnfiguratin and peratin f the device must be under supervisin f a skilled electrician. Natinal regulatins must be bserved fr: - Preventin f accidents - Safety and installatin f mechanical and electrical systems - Electrmagnetic cmpliance Please nte the technical data f the device, envirnmental requirements and requirements fr pwer supply. ESD rules must be cmplied with when handling the device. The device ist t be regarded as a cmpnent in terms f EMC regulatins. Cmpliance with EMC regulatins must be reached fr the machine f which the device is a cmpnent. Use apprpriate measures fr shielding / filtering. The prcess f develpment and verificatin fr sftware and firmware (sw/fw) is carried ut with the necessary care and understanding. Hwever, sw/fw can nt be guaranteed t be errr free. H+L reserves the right t change and crrect the affected prducts at ist wn judgement. Hartmann+Lämmle GmbH+C.KG Schuckertstraße 15 D-71277 Rutesheim fn: +49-7152-992-3 fax: -400 inf@hl-hydraulic.cm
Operating Instructins Page 3/6 2. Revisins 21.06.02/Bra first issue Picture, 4.,9. 3. Delivery Delivery cntains the device HS2 withut further accessries. 4. Accessries Fr devices with spring frce clamps (HS2/B2), there is n necessary (plugs) accessries. Fr device HS2/B3 (fur utputs) the necessary plugs are nt included: Fr X1: Typ: MSTB2,5/8-ST-5,08 Phenix Nr.: 17 57 07 7 1 piece Fr X2: Typ: MSTB2,5/9-ST-5,08 Phenix Nr.: 17 57 08 0 1 piece Manufacturer: Phenix Cntact, Tel.: 05235/3-00 www.phenixcntact.cm Available n request:: Item: Plug Set HS2/F1 IdN.: 79-0041-0008-00 Cntents: 1 * MSTB2,5/8-ST-5,08 1 * MSTB2,5/9-ST-5,08 1 * MSTB2,5/10-ST-5,08 5. Overview The device HS2 is used fr faster switching f hydraulic valves with electrmagnetic peratin. HS2 is ptimized ft the NG4 line f valves frm H+L. By applying a shrt puls f high vltage, the switching n time f a typical valve will be brught dwn frm 17 ms t apprx. 7 ms. The ptimized de-energizing f the magnet will als bring the switching ff time dwn t 10 ms (typical numbers). 6. Setup Cnnecttins t HS2 may nly be made / discnnected while pwer is ff. After pwer-n the device is ready - there are n sftware parameters r hardware ptins t be set. In case f a rtary mde switch being n bard, it will be factry set t 0 - this is the standard mde f peratin. Chse ther mdes f peratin nly after cnsultatin with H+L. 7. Pwer Supply and Fusing Nte the specificatins fr the pwer supply in the technical data. Nte: using a DC pwer supply with hard cntrl characteristic (electrnic current limiter) can result in errneus vltage drps due t peak current limiting. Using a DC pwer supply with sft cntrl characteristic is preferred. Hartmann+Lämmle GmbH+C.KG Schuckertstraße 15 D-71277 Rutesheim fn: +49-7152-992-3 fax: -400 inf@hl-hydraulic.cm
Operating Instructins Page 4/6 8. Operatin The fur magnets will be cnnected t the utputs Q[0..3]. They will be cntrlled by the inputs D[3..0]. Cntrl f the fur channels 0..3 is independent frm each ther. Please nte: the required delay between tw switch-n events must be at least 25 ms t result in the full speedup f switching. Cntrl: PLC / CNC Pwer Supply: 24 VDC D3 D2 D1 D0 24V 0V HS2/Bx Q3 Q2 Q1 Q0 1..4 * Magnet 24 V / 1,5 A The HS2 implements n lgical prcessing r flw cntrl. The cntrl signals D[0..3] frm the PLC/CNC will be amplified transparently. 8.1 Mde f Operatin The Mde f peratin will be selected n the rtary cding switch. A change f this setting becmes effective after pwer-n. Mde Functin 0 Fr H+L NG4 valves 1.. F reserved Hartmann+Lämmle GmbH+C.KG Schuckertstraße 15 D-71277 Rutesheim fn: +49-7152-992-3 fax: -400 inf@hl-hydraulic.cm
Operating Instructins Page 5/6 9. Cnnectins Cnnectrs X1 and X2 are either spring frce clamps fr wires f max. 1mm² (HS2/B2) r cnnectrs f the type Phenix COMBICON 5.08 mm (HS2/B3). Cnnectr X1 Pin N. Signal Functin X1-1 PE Earth X1-2 0V 0 V Supply X1-3 24V 24 V Supply LED: GN X1-4 0V 0 V return fr Q[1,0] X1-5 Q0 Output: Magnet Q0 LED: YE X1-6 Q1 Output: Magnet Q1 LED: YE X1-7 D0 Cntrl input: fr magnet Q0 LED: YE X1-8 D1 Cntrl input: fr magnet Q1 LED: YE Cnnectr X2 (ptinal) Pin N. Signal Functin X2-1 0V 0 V return fr Q[2,3] X2-2 Q2 Output: Magnet Q2 LED: YE X2-3 Q3 Output: Magnet Q3 LED: YE X2-4 Q4 Q4 (res.) LED: YE X2-5 Q5 Q4 (res.) LED: YE X2-6 D2 Steuereingang: für Magnet Q2 LED: YE X2-7 D3 Steuereingang: für Magnet Q3 LED: YE X2-8 D4 D4 (res.) LED: YE X2-9 D5 D5 (res.) LED: YE The utputs are high-side switching. The lad will be driven against 0V. Hartmann+Lämmle GmbH+C.KG Schuckertstraße 15 D-71277 Rutesheim fn: +49-7152-992-3 fax: -400 inf@hl-hydraulic.cm
Operating Instructins Page 6/6 10. Technical Data Ident.-N. 79-0000-0006-01 HS2/B2 with tw utputs 79-0000-0006-02 HS2/B3 with fur utputs Dimensins Prtectin Pwer cnsumptin Strage envirnment Operating envirnment Pwer supply Fuse Cnnectrs 112 mm * 96 mm * 60 mm Munts n 35 mm DIN rail IP 00, device has metal cver against carse cntacts 150 VA, depending n cnnected lad and cycle timing -25 C..+70 C humidity: 5%..95% nt cndesing 5 C..+50 C humidity: 5%..95% nt cndesing 21..28VDC, including max. 2 Vss ripple Pwer-n current peak: max. 10 A / 10 ms External: 10 A, slw HS2/B1: spring frce clamps, max. wire diameter 1 mm² HS2/B2: COMBICON RM 5,08 mm plug 24 V lgic inputs 24V/10 ma, lw = 0..5 V, high = 15 V.. Vb 24 V lgic utputs 24V/50A Valve utputs Cycle time 24V / 1,5 A, with bster max. 100 V Clamping vltage: apprx. -50V <= 0,2 ms 11. Dimensins 112,0 60,0 96,0 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 9 X1 X2 X1 X2 Reserved t change. Hartmann+Lämmle GmbH+C.KG Schuckertstraße 15 D-71277 Rutesheim fn: +49-7152-992-3 fax: -400 inf@hl-hydraulic.cm