User Guide for eduroam 獲 以 下 認 證 : Certificado pela: Certified by: 澳 門 望 廈 山 Colina de Mong-Há, Macau 電 話 : (853) 8598 3120 Tel: (853) 8598 3120 傳 真 : (853) 8598 3151 Fax: (853) 8598 3151 www.ift.edu.mo www.ift.edu.mo
Table of Content 1. For Android... 3 2. For ios... 4 3. For Windows Phone... 6 4. For Mac OS... 9 5. For Windows 7... 11 5.1 Create a Wi-Fi Profile... 11 5.2 Connection to eduroam... 18 6. For Windows 8 / 8.1 (Method 1)... 20 7. For Windows 8 / 8.1 (Method 2)... 22 7.1 Add a Wi-Fi Profile... 22 7.2 Connection to eduroam... 26 2
1. For Android Step 1. Turn on Wi-Fi at Settings. Step 2. Click eduroam and then select PEAP and MSCHAPV2. Type in your username and password and then click Connect. a: Enter your username in the following format: <network id>@ift.edu.mo (or fully qualified domain name (FQDN) accounts) b: Enter your password 3
2. For ios Step 1. Go to Settings and turn on your Wi-Fi. Step 2. From the Choose a Network, select eduroam. 4
Step 3. Input your Username and Password and click Join. a: Enter your username in the following format: <network id>@ift.edu.mo (or fully qualified domain name (FQDN) accounts) b: Enter your password Step 4. Click Trust to install IFT-CPPM certificate. Step 5. Now eduroam is successfully connected. 5
3. For Windows Phone Step 1. Go to the Application Window. Step 2. Go to Settings and click Wi-Fi. 6
Step 3. Select eduroam. Step 4. Enter your Username & Password and click done. a: Enter your username in the following format: <network id>@ift.edu.mo (or fully qualified domain name (FQDN) accounts) b: Enter your password 7
Step 5. Click accept to install certificate and connecting. Step 6. Now eduroam is successfully connected. 8
4. For Mac OS Step 1. Click the Wi-Fi button Turn Wi-Fi On at the top right corner. Step 2. From the Wi-Fi: Looking for Networks, select eduroam. 9
Step 3. Input your Username (format: <network id>@ift.edu.mo (or fully qualified domain name (FQDN) accounts)) and Password and click Join. Step 4. Click Continue to install NPS2012@ift.edu.mo or other certificates. Step 5. Now eduroam is successfully connected. 10
5. For Windows 7 5.1 Create a Wi-Fi Profile Step 1. Click on Windows 7 Start Menu and then click Control Panel. Step 2. Double click on Network and Sharing Center. 11
Step 3. Click on Manage wireless networks. Step 4. Click Add button. Step 5. Click on Manually create a network profile. 12
Step 6. In Network name (SSID), type the eduroam (Note: Network name / SSID is case-sensitive.) - In Security type, select the WPA2-Enterprise. - In Encryption type, select AES. - Uncheck the Start this connection automatically. - Click Next. Step 7. Click on Change connection settings. 13
Step 8. Click on the Security tab. Step 9. Uncheck the Remember my credentials for this connection each time I m logged on. 14
Step 10. Click the Settings button. Step 11. Uncheck the Validate server certificate and click the Configure button. 15
Step 12. In EAP MSCHAPv2 Properties windows, uncheck the Automatically use my Windows login name and password (and domain if any). Click OK button. Step 13. In Protected EAP Properties windows. Click OK button. 16
Step 14. In Wireless Network Properties windows, click Advanced settings. Step 15. In 802.1X settings tab: - Check the Specify authentication mode checkbox. - In specify authentication mode, select User authentication. - Click OK button. 17
Step 16. In Wireless Network Properties, click OK button. 5.2 Connection to eduroam Step 1. Double Click on the wireless connection icon as shown in the diagram to view the status of the wireless access. 18
Step 2. When you are within range of the wireless Access Point and your wireless network radio enabled, Windows will display a connecting message to the network. Step 3. When the network is connected, the below screen will appear. Enter your username (format: <network id>@ift.edu.mo (or fully qualified domain name (FQDN) Accounts)) and password to login to the wireless network. Step 4. If the authentication process is successful, you will see the below screen. Step 5. Now eduroam is successfully connected and you can open any browser to visit web page. 19
6. For Windows 8 / 8.1 (Method 1) Step 1. Click the Wi-Fi button at the bottom right corner. Step 2. From the Wi-Fi, select eduoram and click Connect. 20
Step 3. Input your Username (format: <network id>@ift.edu.mo (or fully qualified domain name (FQDN) Accounts) and Password and click OK. Step 4. Click Connect to continue connecting. Step 5. Now eduroam is successfully connected. 21
7. For Windows 8 / 8.1 (Method 2) 7.1 Add a Wi-Fi Profile Step 1. At the Metro Screen, press the windows key + x to go to the Control Panel. Step 2. In the Control Panel window, click on Network and Internet. 22
Step 3. In Network and Internet window, click on Set up a new connection or network. Step 4. Next, click on Manually connect to a wireless network. Step 5. When prompted to enter the wireless network information: - Enter the eduroam Network name / SSID. (Note: SSID is case-sensitive.) - Select WPA2-Enterprise as the Security type. Encryption type will be defaulted to AES. - Enable the Start this connection automatically checkbox. - Enable the Connect even if the network is not broadcasting checkbox. - Click the Next button. 23
Step 6. In the next window, click on Change connection settings. Step 7. In the pop-up window, Wireless Network Properties: - Ensure the checkboxes for Connect automatically when this network is in range and Connect even if the network is not broadcasting its name (SSID) are checked. - Click on the Security tab. 24
Step 8. Under the Security options: - Ensure Security type is set to WPA2-Enterprise. - Ensure Encryption type is set to AES. - Select Microsoft: Protected EAP (PEAP) for network authentication method. Uncheck the Remember my credentials for this connection each time I m logged on checkbox. - Click on Settings button. Step 9. In the Protected EAP Properties page: - Uncheck Validate server certificate. - Uncheck Enable Fast Reconnect. - Select Secured password (EAP-MSCHAP v2) for authentication method. - Click on the Configure button. - Uncheck the Automatically use my Windows login name and password. - Click on OK button. 25
Step 10. Under the Security options: - Click on the Advanced settings option from the followings: - Ensure the checkbox for Enable single sign on for this network is checked. 7.2 Connection to eduroam Step 1. Double Click on the wireless connection icon as shown in the diagram to view the status of the wireless access. Step 2. When you are within range of the wireless Access Point and your wireless network radio enabled, Windows will display a connecting message to the network. 26
Step 3. When the network is connected, the below screen will appear. Enter your username (format: <network id>@ift.edu.mo (or fully qualified domain name (FQDN) Accounts)) and password to login to the wireless network. Step 4. If the authentication process is successful, you will see the below screen. Step 5. Now eduroam is successfully connected. Last Updated: 2015/8/4 27