THE ADVANTAGES ARE YOURS The new switches/discrepancy switches "R0-DR0" have special characteristics that make them very different from the normal switches on the market. Listed below are some of the many advantages they provide. * Contact system with self-cleaning action on both sides of contact, suitable for being used in highly aggressive environments, with presence of high percentage of saline dust and corrosive agents DoublebridgeRotorcontactKnifetypeFixedcontacts with self-cleaning effect. * * High resistance to shock and vibration, due to the clip and blade contact design. * * Terminals with protection IP0 according to IEC 0 with two entries. * * Easy access to the screws of each terminal even when the switch is wired. * IP0 terminal screw with two entries. * High mechanical strength, shaft and main structure in zinc plated steel, suitable for tropical climates. *
* Terminals screws at for ease of access. * * Last generation polymer with high mechanical strength and excellent electrical characteristics. Self-extinguishing ULV0. * Terminaleasytoaccessfromtherearofthesw itch thanks to the inclined screw. * Wide range of accessories available. * * Captive plus/minus terminal screws M.. * * Terminals supplied opened for fast and easy installation. * * Double choice of location of the cables. Possibility of wiring horizontally or vertically on a single model of switch. Horizontal Wiring * * Numbered plastic cover, customizable and replaceable in case of failure without removing the wires to the switch. * Vertical Wiring
* Geometric body insulation allows economizing space allowing close mounting of switches. * Doubleaccesstoterminalsallowsclose mounting of switches. * A wide range of realizable switching schemes * * Same parts used for base or panel mounting (upside down mounting). * * Up to packets of contacts assembled in a single switch. * * Version tandemswitch -- series switches operated by a single handle. * * / positions switch with the possibility of an internal common (avoids external bridges). * Same parts used for base or panel mounting (upside down mou ting).
Series R0 CONTROL SWITCH : Model : R0 Stay Put Positions R0 Spring Return Positions (Max 0 packets) It can have from to positions fixed or with automatic return. It may be supplied with frontplate size mm (Q) or mm (Q) Series R0 KEY OPERATED SWITCH Frontplate (Q) 0 0 : Ø. Ø. Ø 0 MA PACKETS 0 Ø0 Model : R0 Stay Put Positions R Spring Return Positions (Max packets) Key Operated rotary switch. Available with keys equal to each other and up to 00 different combinations. Frontplate (CQ) 0 0
: Series R0 KEY LOCK CONTROL SWITCH 0 Ø. Ø Ø. 0 Frontplate (Q). Model : R0 Stay Put Positions R Spring Return Positions (Max 0 packets) Key Lock rotary switch. Available with keys, that can be both equals or different one from the other (up to 00 different numbers). MASTER KEY System is also available. 0 0 0 MA PACKETS : Series R0 CONTROL SWITCH WITH PADLOCKABLE FACILITY Ø 0 Ø. Ø Ø. 0. Model : RL Stay Put Positions RL Spring Return Positions (Max 0 packets) Frontplate (Q) Switch with padlockable system. Pulling the pin positioned below the handle, the switch can be locked in the desidered position by inserting the padlock. 0 0 MA PACKETS
Series DR0 CONTROL DISCREPANCY SWITCH : Model : DR0 Turn - Push to turn Discrepancy switch for indicating and control HV Circuit Breakers or Disconnector Switches status. Frontplate (MQ) Ø0 0 Ø0 Round Frontplate (MT) 0 0 0 Series DR0 CONTROL DISCREPANCY SWITCH WITH OPALINE HANDLE : Model : DR0 Turn - Push to turn Discrepancy switch with opaline handle. Light Provided by means of a LED lamp bayonet type BAs. Frontplate (MQ) Ø0 0 Ø0 Round Frontplate (MT) 0 0 0 0
: Series DR0 CONTROL DISCREPANCY SWITCH HOLE MOUNTING Ø. Ø0 Model : DR0 Turn - Push to turn Ø. Frontplate (MQ) Round Frontplate (MT) Discrepancy switch. New fitting system facilitated by the holes. Escutcheon plates available in different colours. 0 0 0 0 : Series R0 CONTROL SWITCH WITH PISTOL GRIP HANDLE Ø. 0 Frontplate (Q) Ø Model : R0P Stay Put Positions R0P Spring Return Positions (Max 0 packets) Switch with pistol knob. It may have from to positions fixed or with automatic return. It can be supplied with frontplate mm (Q) or mm (Q). 0 0 0 MA PACKETS
Series R0 CONTROL SWITCH WITH OVAL HANDLE : Ø. 0 Model : R0V Stay Put Positions R0V Spring Return Positions (Max 0 packets) Switchwithovalhandle. Itmayhavefromtopositionsfixedorwithautomaticreturn. Specialdesignoftheknobmakesoperationsmoothevenforswitcheswithlarge number of contacts. Frontplate (Q) Ø 0 0 0 MA PACKETS Series R0 BASE MOUNTING CONTROL SWITCH M0. Model : R Stay Put Positions R Spring Return Positions (Max 0 packets) Switch suitable for fitting at the bottom of the panel. Access to screw from the front of the switch. Frontplate (Q) Drilling 0 0 0 0 0 0 MA PACKETS
: Series R0 CIRCUIT BREAKER CONTROL SWITCH Ø. 0 Ø Model : R Circuit Breaker Control Switch Frontplate (Q) Designed for the Circuit Breaker control. It consists of two main groups of contacts and a dragging joint.the group dragged contacts is used as an alarm or indication. Available also with frontplate xmm with TRIP INDICATOR (SQ). =Main Switch 0 0 + =Dragged Switch 0 Series R0 TANDEM DRIVE MECHANISME (TANDEM SWITCH) 0 0 00 : 0 Frontplate (Q) Ø0. 0 n holes Ø. Model : TR0 Stay Put Positions This device is used to connect several switches so that they can be operated simultaneously, thanks to this system a large number of contacts can be obtained in a minimal space. 0+0 + + + + + + + + + 0+0 0 0 0 MA * PACKETS
Series R0 AUILIARY SWITCH M0. Ø Ø. Model : R Stay Put Positions Auxiliary switches are specially designed for use in the auxiliary circuit breakers or disconnector. Drilling Series R0 KEY LOCK CONTROL SWITCH WITH OVAL HANDLE 00 0 0 MA PACKETS : 0 Ø. Ø Ø. 0 Model : R0V Stay Put Positions RV Spring Return Positions (Max 0 packets) Switch with oval handle and key lock. It may have from to positions fixed or with automatic return. Available with keys, that can be both equals or different one from the other (up to different numbers).master KEY System is also available. Frontplate (Q). 0 0 0 MA PACKETS 0
FORM FOR SPECIAL DIAGRAM DATE: : N ORDER: N 0 0 0 FIRM: : MR: : 0 TEL: FA: Q.TY: ': DELIVERY DATE: : Key removable in pos. Closed without current breaking PACKETS Removable Key in Positions Positions TERMINALS ENGRAVINGS Spring return Closed contacts Model: Accessories: Make-before-break contacts Maintained action contact Pistol knob Push Button Interlock. Gilded Contacts OvalHandle Master Key Escutcheon xmm Different numbering of key Electromagnetical Interlock Description CODE: ( it will given by COMELETRIC ) Note: