SIRCOVER. Manual changeover switches from 125 to 3200 A. Changeover switches. Function. Advantages. The solution for.

Transcription

1 The solution for Changeover switches svr_099_b_1_cat > Manufacturing industry. > Power distribution Strong points svr_059_a_1_cat > complete range. > Easy connections. > Stable positions. > mproved on load switching. Specific features C -0- > On load switching C-33. Function Bypass 125 are manual multipolar changeover switches with positive break indication. The family includes three ranges: C for dead time switching (-0-), for overlapping contact switching (-+-), and Bypass. This version is a combination of three interlocked switches enabling use with poles or poles. They provide switching, source inversion and changeover under load for two low voltage power circuits, as well as their safety isolation by double breaking per pole. Conformity to standards > EC > EC pprovals and certifications (1) (1) Product reference on request. Enclosed solution dvantages complete product range Three versions of the are available to ensure compatibility with the maximum number of applications: C (-0-) with improved on load switching characteristics and isolation position, with overlapping contacts (-+-) and a Bypass version. Easy connections copper bar connection kit is available for 2000 to 3200 ratings. t enables various types of connection: Flat or edgewise connection with top or bottom bridging. Stable positions s have three stable positions which are not affected by voltage drops or vibrations, thus protecting your load against network interference. mproved on load switching Thanks to its C-23 and C-33 characteristics, which are tested in accordance with standards EC and EC , the C enables secure and reliable switching on all types of load, without the need for pre-breaking upstream. > vailable enclosed from 125 to General Catalogue

2 What you need to know C (-0-) switches have 3 stable positions, and are available as 3 or 4 pole devices. They are available enclosed in a steel or polyester enclosure from 125 to with overlapping contacts (-+-) are 3 or 4 pole devices available from 125 to They are available in a steel enclosure from 125 to With 3 stable positions (-0-), Bypass are a combination of three interlocked switches enabling the use with 3+6 poles or 4+8 poles from 125 to ll ratings are available in a steel enclosure. ll can be utilised with a direct front or external operation handle. acces_226_c_2_cat svr_136_a_1_x_cat Copper bar connection kits enable the connection between the two power terminals of the same pole (fig.1 & fig.2) and the bridging of the poles on the top or bottom side of the switch (fig.3), for ratings 2000, 2500 and Fig. 1 Fig.2 Fig. 3 acces_229_b_2_cat acces_231_a_1_cat Top or bottom flat connection Edgewise connection Top or bottom Top or bottom bridging connection General Catalogue

3 References C -0- No. of poles Switch body Direct handle External handle Shaft for external handle Bridging bars uxiliary contact Terminal shrouds Terminal screens C C C C C C (3)(4) (3)(4) C C C C C C 4040 J2 type Blue Red S2 type Black P Black P (1) 200 mm mm (1) (3)(4) (3)(4) C C C C st /2 nd contact NO/NC (2) (3)(4) (3)(4) (5) (5) C C C C C C C C C C 4180 J3 type Blue Red S4 type Black P mm mm (1) (5) (5) (5) (5) C C C C C C 4320 S5 type Black S5 type Black P mm mm (1) 450 mm (6) 1 st contact NO/NC included included (1) Standard. (2) 2 pieces supplied, one for position and one for position. (3) To fully shroud front, rear, top and bottom 4 references required. (4) To shroud front switch top and bottom 2 references required. (5) 2 pieces supplied, one for top side and another for bottom side. (6) See "Copper bar connection kits" page General Catalogue

4 - + - No. of poles Switch body Direct handle External handle Shaft for external handle Bridging bar uxiliary contact Terminal shrouds Terminal screens (1) (1) (1) (1) (4)(5) (4)(5) (1) 200 mm S2 type Black (2) Black P (2) 320 mm (1) (2) (1) (1) (4)(5) (4)(5) (1) (1) (1) (1) 1 st /2 nd contact NO/NC (3) (4)(5) (4)(5) (6) (6) (1) (1) (1) (1) 200 mm S4 type Black (2) Black P (2) 320 mm (1) (2) (1) (6) (6) (6) (6) (1) vailable enclosed (see "Enclosed changeover switches" page 625). (2) Standard. (3) 2 pieces supplied, one for position and one for position. (4) To fully shroud front, rear, top and bottom 4 references required. (5) To shroud front switch top and bottom 2 references required. (6) 2pieces supplied, one for top side and another for bottom side. General Catalogue

5 References (continued) Bypass No. of poles Switch body Shaft for -0- Direct handle External handle external handle Bridging bar uxiliary contact Terminal shrouds Terminal screens P (1) P (1) P (1) P (1) Black S2 type Black P (2) Black P mm mm (2) (4)(5) (4)(5) P P P (1) P (1) S3 type Black P mm mm P (1) P (1) Black (2) P (1) P (1) P (1) 1 st /2 nd contact NO/NC (3) (4)(5) (4)(5) (4)(5) (4)(5) (6) (6) P (1) P (1) mm P (1) Black Black P mm (2) P (1) 450 mm P (1) (6) (6) (6) P (1) (6) (1) vailable enclosed (see "Enclosed changeover switches" page 625). (2) Standard. (3) 2 pieces supplied, one for position and one for position. (4) To shroud front switch top and bottom 3 references required. (5) To fully shroud front, rear, top and bottom 6 references required. (6) 2 pieces supplied, one for top side and another for bottom side. 332 General Catalogue

6 ccessories Direct operation handle C -0- Handle colour Handle type Reference Blue J2 type Red J2 type Blue J3 type Red J3 type Black S5 type (1) Handle colour Handle type Reference Black B3 type Black C1 type acces_356_a_1_cat acces_129_b_1_cat acces_153_a_2_cat Bypass Handle colour Handle type Reference Black B3 type Black C1 type Black C2 type (1) (1) Double lever handle J2 type handle C1 type handle C2 type handle External operation handle Door interlocked external front operation handles include an escutcheon, are padlockable and must be utilised with an extension shaft. C -0- and -+- External Switching type P (1) Handle Reference P55 S2 type P65 S2 type P65 S2 type P65 S4 type (2) P65 S4 type (2) P65 S5 type (2) (1) P : protection degree according to EC standard. (2) Double lever handle. Bypass Switching type External P (1) Handle Reference P55 S2 type P65 S2 type P65 S3 type P65 V2 type (1) P : protection degree according to EC standard. lternative S-type handle cover colours S2 type handle acces_150_a_2_cat S3 type handle acces_151_a_1_cat S4 type handle acces_152_a_2_cat S5 type handle acces_286_a_1_cat For single lever handles S1, S2, S3 type and for double lever handle S4 type. Other colours: Please consult us. To be ordered Colour in multiples of Handle Reference Light grey 50 S2, S3 type Dark grey 50 S2, S3 type Light grey 50 S4 type Dark grey 50 S4 type acces_198_a_2_cat S-type handle adapter Enables S-type handles to be fitted in place of existing older style SOCOMEC handles. dapter can also be utilised as a spacer to increase the distance between the panel door and the handle lever. Dimensions dds 12 mm to the depth. Colour To be ordered in multiples of External P (1) Reference Black 1 P (1) P : protection degree according to EC standard. acces_187_a_1_cat General Catalogue

7 ccessories (continued) Shaft guide for external operation Required for shaft lengths over 320 mm. To guide the shaft extension into the external handle. This accessory enables handle to engage extension shaft with a misalignment of up to 15 mm. Description Reference Shaft guide Shaft for external handle Standard lengths: mm, mm, mm. C -0- and -+- Length (mm) Dimension X (mm) Reference Other lengths: Please consult us. acces_260_a_2_cat acces_369_a_1_cat Bridging bars For creating a common connection between switches &, on the top or bottom side of the, to enable, for example, the load to be fed from either incoming source ( or ). Section (mm) Reference x x x x x x x x For Bypass, two sets of bridging bars are needed as the switch is composed of three basic switch frames. C -0- and -+- acces_205_a_2_cat acces_041_a_1_cat Bypass acces_208_a_2_cat svr_124_a_1_cat svr_068_a_1_x_cat acces_144_b_1_cat Bypass Length (mm) Dimension X (mm) Reference X acces_202_a_1_x_cat 334 General Catalogue

8 Copper bar connection kits from 2000 to Enables: - connection between the two power terminals of the same pole for 2000 to 3200 ratings (Fig. 1 and Fig 2). - top or bottom bridging connection (Fig. 3). For 3200 rating, the connection pieces (part ) are delivered bridged from factory. Bolt sets must be ordered separately. Further details for these specific accessories are available in the user guide downloadable from Fig. 1 acces_226_b_1_x_cat Top or bottom flat connection - Fig. 1 Quantity to order Piece per pole (1) Reference Connection - part Bolt set - part B acces_232_a_1_cat 3200 Connection - part included 3200 Bolt set - part B (1) Example for 3 pole device equipped upstream only: Order 3 times the indicated quantities. Top or bottom edgewise connection - Fig. 2 Quantity to order Piece per pole (1) Reference Connection - part T piece - part C (2) Bracket- part D (2) Fig.2 C D acces_228_b_1_x_cat 3200 Connection - part included 3200 T piece - part C (2) 3200 Bracket- part D (2) (1) Example for 3 pole device equipped upstream only: Order 3 times the indicated quantities. (2) Bolt set is provided with the accessories. Top or bottom bridging connection - Fig. 3 Quantity to order Piece per pole (1) Reference Connection - part Bolt set - part B Bar - part E (2) T piece - part C (2) 210 Fig. 3 C E B acces_233_a_1_cat acces_230_b_1_x_cat 3200 Connection - part included 3200 Bolt set - part B Bar - part E (2) 3200 T piece - part C (2) (1) Example for 3 pole device equipped upstream only: Order 3 times the indicated quantities. (2) Bolt set is provided with the accessories acces_234_a_1_cat uxiliary contact Pre breaking and signalling of positions and : 1 or 2 NO/NC auxiliary contacts in each position. Low level auxiliary contacts: Please consult us. NO/NC changeover contact Connection to the control circuit 6.35 mm fast-on terminal. Electrical characteristics operations. Characteristics Operating current e () Nominal VC 24 VDC 48 VDC current () 13 VC C-13 DC-13 DC acces_065_a_1_cat svr_058_a_1_cat Contact(s) Reference st /2 nd st included General Catalogue

9 ccessories (continued) Terminal shrouds Protection against direct contact with terminals or connecting parts. dvantage Perforations allow remote thermographic inspection without the need to remove the shrouds. No. of poles Position Reference top / bottom / front () / rear () (1)(2) top / bottom / front () / rear () (1)(2) top / bottom / front () / rear () (1)(2) top / bottom / front () / rear () (1)(2) top / bottom / front () / rear () (1)(2) top / bottom / front () / rear () (1)(2) (1) To shroud front switch top and bottom 4 references required for a and 6 references for a Bypass. (2) To shroud front switch top and bottom 2 references required for a and a Bypass. acces_206_a_2_cat Terminal screens Top and bottom protection against direct contact with terminals or connection parts. No. of poles Position Reference top / bottom top / bottom top / bottom top / bottom top / bottom top / bottom top / bottom top / bottom top / bottom top / bottom / top / bottom included acces_207_a_2_cat 336 General Catalogue

10 Key handle interlocking system Padlocking in position, 0 or Bypass Operation Figure Reference external Locking using RONS EL11P lock in position 0 (not included) Bypass Operation Figure Reference direct (1) direct lease consult us direct (2) direct (2) external (2) external (2) (1) Specific handle included. (2) This locking facility can be configured by the user in the 3 positions. Locking using RONS EL11P lock in position, 0, (not included) Bypass Operation Figure Reference direct (1) direct lease consult us direct (2) direct (2) external (2) external (2) (1) Specific handle included. (2) This locking facility can be configured by the user in the 3 positions. Using padlock (not supplied).this device is factory mounted in the direct or external operation handle and allows the use of up to 3 padlocks. Locking: - using lock (not supplied) - using undervoltage coil. The interlocking positions are either determined as standard or configured by the user by removing the pre-formed tabs. Padlocking and locking can be combined. Fig. 1 acces_061_a_1_x_cat Fig.2 acces_001_a_1_x_cat Fig. 3 Fig.4 Locking using 230 VC undervoltage coil in position (factory fitted) Bypass Operation Figure Reference direct lease consult us Locking using type K CSTELL lock (not supplied) Bypass Operation Figure Reference external external acces_132_a_1_x_cat acces_158_a_1_x_cat Other specific accessories bd_03_04_01 Customised protection screens (for specific dimensions or high ambient temperatures). nter phase barrier. Connection accessories. Low level auxiliary contacts. General Catalogue

11 C Characteristics according to EC and EC to 630 Thermal current th at 40 C Rated insulation voltage U i (V) Rated impulse withstand voltage U imp (kv) Rated operational currents e () Rated voltage Utilisation category /B (1) /B (1) /B (1) /B (1) /B (1) /B (1) /B (1) /B (1) 415 VC C-20 / C-20 B 125/ / / / / / / / VC C-21 / C-21 B 125/ / / / / / / / VC C-22 / C-22 B 125/ / / / / / / / VC C-23 / C-23 B 125/ / / / / / / / VC C-20 / C-20 B 125/ / / / / / / / VC C-21 / C-21 B 125/ / / / / / / / VC C-22 / C-22 B 125/ / / / / / / / VC C-23 / C-23 B 80/80 80/80 80/80 200/ / / / / VC (7) C-20 / C-20 B 125/ / / / / / / / VC (7) C-21 / C-21 B 125/ / / / / / / / VC (7) C-22 / C-22 B 125/ / / / / / / / VC (7) C-23 / C-23 B 63/80 63/80 63/80 125/ / / / / VDC DC-20 / DC-20 B 125/ / / / / / / / VDC DC-21 / DC-21 B 125/ / / / / / / / VDC DC-22 / DC-22 B 125/ / / / / / / / VDC DC-23 / DC-23 B 125/ / / / / / / / VDC DC-20 / DC-20 B 125/ / / / / / / / VDC DC-21 / DC-21 B 125 (2) /125 (2) 125 (2) /125 (2) 125 (2) /125 (2) 200 (2) /200 (2) 200 (2) /200 (2) 200 (2) /200 (2) 500 (2) /500 (2) 630 (2) /630 (2) 440 VDC DC-22 / DC-22 B 125 (2) /125 (2) 125 (2) /125 (2) 125 (2) /125 (2) 200 (2) /200 (2) 200 (2) /200 (2) 200 (2) /200 (2) 500 (2) /500 (2) 630 (2) /630 (2) 440 VDC DC-23 / DC-23 B 125 (3) /125 (3) 125 (3) /125 (3) 125 (3) /125 (3) 200 (3) /200 (3) 200 (3) /200 (3) 200 (3) /200 (3) 500 (3) /500 (3) 500 (3) /500 (3) Operational power in C-23 (kw) t 400 VC without pre-break in C (3) 63/63 80/80 80/80 132/ / / / /450 t 690 VC without pre-break in C (3) 55/75 55/75 55/75 90/110 90/ / / /220 Reactive power (kvar) t 400 VC (5) Rated operational currents e () according to EC Rated voltage Utilisation category /B (1) /B (1) /B (1) /B (1) /B (1) /B (1) /B (1) /B (1) 415 VC C-31 / C-31 B VC C-32 / C-32 B VC C-33 / C-33 B Fuse protected short-circuit withstand as per EC at 690 VC Prospective short-circuit current (k rms) 100 (5) 100 (5) 50 (5) ssociated fuse rating () Circuit breaker protected short-circuit withstand with any circuit breaker that ensures tripping in less than 0.3s (4) Rated short-time withstand current 0.3s cw (k rms) 12 (5) 12 (5) 12 (5) Short-circuit withstand without protection as per EC at 690 VC Rated short-time withstand current 1s cw (k rms) 7 (5) 7 (5) 7 (5) Rated short-circuit making capacity cm (k peak) Rated short-time withstand current 60ms cw (k rms) as per EC at 415 VC 10 (6) 10 (6) 10 (6) Connection Minimum Cu cable cross-section (mm 2 ) x 150 Minimum Cu busbar cross-section (mm 2 ) 2 x 30 x 5 Maximum Cu cable cross-section (mm 2 ) x x 300 Maximum Cu busbar width (mm) Tightening torque mini / maxi (Nm) 9/13 9/13 9/13 20/26 20/26 20/26 20/26 20/26 Mechanical characteristics Durability (number of operating cycles) Weight of switch (kg) Weight of switch (kg) (1) Category with index = frequent operation - Category with index B = infrequent operation. (2) 3-pole device with 2 pole in series for the "+" and 1 pole for the "-".4-pole device with 2 pole in series by polarity. (3) The power value is given for information only, the current values vary from one manufacturer to another. (4) Value for coordination with any circuit breaker that ensures tripping in less than 0.3s. For coordination with specific circuit-breaker references, higher short-circuit current values are available. Please consult us. (5) Data at 415 VC (6) Data at 30 ms (7) With terminal shrouds or phase barrier. 338 General Catalogue

12 800 to 3200 Thermal current th at 40 C Rated insulation voltage U i (V) Rated impulse withstand voltage U imp (kv) Rated operational currents e () Rated voltage Utilisation category /B (1) /B (1) /B (1) /B (1) /B (1) /B (1) /B (1) 415 VC C-20 / C-20 B 800/ / / / / / / VC C-21 / C-21 B 800/ / / /1600 -/2000 -/2500 -/ VC C-22 / C-22 B 800/ / / /1600 -/2000 -/2500 -/ VC C-23 / C-23 B 800/ / / /1250 -/1600 -/1600 -/ VC C-20 / C-20 B 800/ / / / / / / VC C-21 / C-21 B 800/ / / /1600 -/2000 -/2500 -/ VC C-22 / C-22 B 630/ / / / VC C-23 / C-23 B 400/ / / / VC (6) C-20 / C-20 B 800/ / / / / / / VC (6) C-21 / C-21 B 800/ / / /1600 -/2000 -/2500 -/ VC (6) C-22 / C-22 B 630/ / / / VC (6) C-23 / C-23 B 400/ / / / VDC DC-20 / DC-20 B 800/ / / / VDC DC-21 / DC-21 B 800/ / / / VDC DC-22 / DC-22 B 800/ / / / VDC DC-23 / DC-23 B 800/ / / / VDC DC-20 / DC-20 B 800/ / / / VDC DC-21 / DC-21 B 800 (3) /800 (3) 1000 (3) /1000 (3) 1250 (3) /1250 (3) 1250/ VDC DC-22 / DC-22 B 800 (3) /800 (3) 1000 (3) /1000 (3) 1250 (3) /1250 (3) 1250/ VDC DC-23 / DC-23 B 800 (3) /800 (3) 1000 (3) /1000 (3) 1250 (3) /1250 (3) 1250/1250 Operational power in C-23 (kw) t 400 VC without pre-break in C (3) 710/ / / / /710 t 690 VC without pre-break in C (3) 185/ / / / /750 Reactive power (kvar) t 400 VC (5) Rated operational currents e () according to EC Rated voltage Utilisation category /B (1) /B (1) /B (1) /B (1) /B (1) /B (1) /B (1) 415 VC C-31 / C-31 B VC C-32 / C-32 B VC C-33 / C-33 B Fuse protected short-circuit withstand as per EC at 415 VC Prospective short-circuit current (k rms) ssociated fuse rating () x 800 Circuit breaker protected short-circuit withstand with any circuit breaker that ensures tripping in less than 0.3s (4) Rated short-time withstand current 0.3s cw (k rms) Short-circuit withstand without protection as per EC at 415 VC Rated short-time withstand current 1s cw (k rms) Rated short-circuit making capacity cm (k peak) Rated short-time withstand current 60ms cw (k rms) as per EC at 415 VC Connection Minimum Cu cable cross-section (mm 2 ) 2 x x 240 Minimum Cu busbar cross-section (mm 2 ) 2 x 40 x 5 2 x 50 x 5 2 x 60 x 5 2 x 80 x 5 2 x 100 x 10 2 x 100 x 10 2 x 100 x 10 Maximum Cu cable cross-section (mm 2 ) 2 x x x x 185 Maximum Cu busbar width (mm) Tightening torque min (Nm) 20/26 20/26 20/26 40/45 40/45 40/45 40/45 Mechanical characteristics Durability (number of operating cycles) Weight of switch (kg) Weight of switch (kg) (1) Category with index = frequent operation - Category with index B = infrequent operation. (2) 3-pole device with 2 pole in series for the "+" and 1 pole for the "-".4-pole device with 2 pole in series by polarity. (3) The power value is given for information only, the current values vary from one manufacturer to another. (4) Value for coordination with any circuit breaker that ensures tripping in less than 0.3s. For coordination with specific circuit-breaker references, higher short-circuit current values are available. Please consult us. (5) Data at 415 VC. (6) With terminal shrouds or phase barrier. General Catalogue

13 -+ - and Bypass - Characteristics according to EC to 400 Thermal current th at 40 C Rated insulation voltage U i (V) Rated impulse withstand voltage U imp (kv) Rated operational currents e () Rated voltage Utilisation category /B (1) /B (1) /B (1) /B (1) /B (1) 415 VC C-20 / C-20 B 125/ / / / / VC C-21 / C-21 B 125/ / / / / VC C-22 / C-22 B 125/ / / / / VC C-23 / C-23 B 125/ / / / / VC (2) C-20 / C-20 B 125/ / / / / VC (2) C-21 / C-21 B 125/ / / / / VC (2) C-22 / C-22 B 125/ / / / / VC (2) C-23 / C-23 B 63/80 63/80 63/80 100/ / VDC DC-20 / DC-20 B 125/ / / / / VDC DC-21 / DC-21 B 125/ / / / / VDC DC-22 / DC-22 B 125/ / / / / VDC DC-23 / DC-23 B 125/ / / / / VDC DC-20 / DC-20 B 125/ / / / / VDC DC-21 / DC-21 B 125 (3) /125 (3) 125 (3) /125 (3) 125 (3) /125 (3) 200 (3) /200 (3) 200 (3) /200 (3) 440 VDC DC-22 / DC-22 B 125 (3) /125 (3) 125 (3) /125 (3) 125 (3) /125 (3) 200 (3) /200 (3) 200 (3) /200 (3) 440 VDC DC-23 / DC-23 B 125 (4) /125 (4) 125 (4) /125 (4) 125 (4) /125 (4) 200 (4) /200 (4) 200 (4) /200 (4) Operational power in C-23 (kw) t 400 VC without pre-break in C (1)(5) 63/63 80/80 80/80 132/ /132 t 690 VC without pre-break in C (1)(5) 55/75 55/75 55/75 90/110 90/110 Reactive power (kvar) t 400 VC (5) Fuse protected short-circuit withstand as per EC at 400 VC Prospective short-circuit current (k rms) ssociated fuse rating () Circuit breaker protected short-circuit withstand with any circuit breaker that ensures tripping in less than 0.3s (6) Rated short-time withstand current 0.3s cw (k rms) Short-circuit capacity (without protection) Rated short-time withstand current 1s cw (k rms) Connection Minimum Cu cable cross-section (mm 2 ) Minimum Cu busbar cross-section (mm 2 ) Maximum Cu cable cross-section (mm 2 ) Maximum Cu busbar width (mm) Tightening torque min (Nm) Mechanical characteristics Durability (number of operating cycles) Weight of switch (kg) Weight of switch (kg) (1) Category with index = frequent operation - Category with index B = infrequent operation. (2) With terminal shrouds or phase barrier. (3) 4-pole device with 2 poles in series per polarity. (4) 3-pole device with 2 pole in series for the "+" and 1 pole for the "-". (5) The power value is given for information only, the current values vary from one manufacturer to another. (6) Value for coordination with any circuit breaker that ensures tripping in less than 0.3s. For coordination with specific circuit-breaker references, higher short-circuit current values are available. Please consult us. 340 General Catalogue

14 500 to 1800 Thermal current th at 40 C Rated insulation voltage U i (V) Rated impulse withstand voltage U imp (kv) Rated operational currents e () Rated voltage Utilisation category /B (1) /B (1) /B (1) /B (1) /B (1) /B (1) 415 VC C-20 / C-20 B 500/ / / / / / VC C-21 / C-21 B 500/ / / / / / VC C-22 / C-22 B 500/ / / / / / VC C-23 / C-23 B 500/ / / / / / VC (2) C-20 / C-20 B 500/ / / / / / VC (2) C-21 / C-21 B 400/ / / / / / VC (2) C-22 / C-22 B 250/ / / / / / VC (2) C-23 / C-23 B 160/ / / / / / VDC DC-20 / DC-20 B 500/ / / / / / VDC DC-21 / DC-21 B 500/ / / / / / VDC DC-22 / DC-22 B 400/ / / / / / VDC DC-23 / DC-23 B 400/ / / / / / VDC DC-20 / DC-20 B 500/ / / / / / VDC DC-21 / DC-21 B 400 (3) /400 (3) 500 (3) /500 (3) 800 (4) /800 (4) 1250 (4) /1250 (4) 1250 (4) /1250 (4) 1250 (4) /1250 (4) 440 VDC DC-22 / DC-22 B 315 (3) /400 (3) 500 (3) /500 (3) 800 (4) /800 (4) 1250 (4) /1250 (4) 1250 (4) /1250 (4) 1250 (4) /1250 (4) 440 VDC DC-23 / DC-23 B 400 (4) /400 (4) 500 (4) /500 (4) 800 (4) /800 (4) 1250 (4) /1250 (4) 1250 (4) /1250 (4) 1250 (4) /1250 (4) Operational power in C-23 (kw) t 400 VC without pre-break in C (1)(5) 280/ / / / / /710 t 690 VC without pre-break in C (1)(5) 150/ / / / / /475 Reactive power (kvar) t 400 VC (5) Fuse protected short-circuit withstand as per EC at 400 VC Prospective short-circuit current (k rms) ssociated fuse rating () x x 800 Circuit breaker protected short-circuit withstand with any circuit breaker that ensures tripping in less than 0.3s (6) Rated short-time withstand current 0.3s cw (k rms) Short-circuit capacity (without protection) Rated short-time withstand current 1s cw (k rms) Connection Minimum Cu cable cross-section (mm 2 ) x x 185 Minimum Cu busbar cross-section (mm 2 ) 2 x 30 x 5 2 x 40 x 5 2 x 60 x 5 2 x 80 x 5 2 x 80 x 5 Maximum Cu cable cross-section (mm 2 ) x x x x 185 Maximum Cu busbar width (mm) Tightening torque min (Nm) Mechanical characteristics Durability (number of operating cycles) Weight of switch (kg) Weight of switch (kg) (1) Category with index = frequent operation - Category with index B = infrequent operation. (2) With terminal shrouds or phase barrier. (3) 4-pole device with 2 poles in series per polarity. (4) 3-pole device with 2 pole in series for the "+" and 1 pole for the "-". (5) The power value is given for information only, the current values vary from one manufacturer to another. (6) Value for coordination with any circuit breaker that ensures tripping in less than 0.3s. For coordination with specific circuit-breaker references, higher short-circuit current values are available. Please consult us. General Catalogue

15 Dimensions 125 to1800 Direct front operation External front operation 10 M Z Z1 U W 8.5 Y Y 1 B C B C 0 N V C 3p. Overall dimensions 4p. C E min C H H Terminal shrouds Switch body Switch mounting Connection J 3p. J 4p. M 3p. M 4p. N T U V W X 3p. X 4p. Y Z Z1 B C x x x to 3200 Direct front operation M L1 125 X T T J T H C 18 svr_072_i_1_x_cat H E min. H S2 type handle for external operation: 125 to 630 B. S4 type handle for external operation: 800 to Terminal shrouds 2. Direct handle operation: to 630 : L1 = 140 mm, to 1800 : L1 = 210 mm svr_150_a_1_x_cat Overall dimensions Switch mounting 3p. 4p. M 3p. M 4p General Catalogue

16 Direct front operation 10 C U M W 8.5 Z Z1 Z2 Y Y Y 1 V 2 C C B L1 External front operation H 45 Overall dimensions Terminal shrouds Switch body Switch mounting Connection M Rating E J 3+6 J 4+8 M X X () 3+6p. 4+8p. C min C H H p. p. p. p. N T U V W 3+6p. 4+8p. Y Z Z1 Z1 B C x x Connection terminals and Bypass 800 and Bypass to 3200 Bypass 1600 ø 9 16 x 11 ø Bypass 125 to N X T T J T H C 18 svr_070_i_1_x_cat H 125 B 210 C 330 = =. S2 type handle for external operation: 125 to 200 B. S3 type handle for external operation: 250 to 630 C. External double lever handle: 800 to Terminal shrouds 2. Direct handle operation: to 200 : L1 = 140 mm, to 630 : L1 = 210 mm, to 1600 : L1 = Ø 330 mm. E min ø svr_077_a_1_x_cat svr_078_b_1_x_cat svr_098_a_1_x_cat General Catalogue

17 Dimensions for external handles 125 to 630 Front operation Handle type S2 type Ø Direction of operation 0 or + Ø D (1) Door drilling RONS EL11P Ø 26 4 Ø Ø CSTELL K poign_030_a_1_gb_cat (1) Ø31 to Ø37: Rear screw mounting Ø37: front clip mounting. 800 to1800 Front operation Handle type S4 type Ø78 Direction of operation 0 or + (2) Door drilling RONS EL11P Ø 26 4 Ø CSTELL K 2 Ø Ø D (1) poign_031_a_1_gb_cat (1) Ø31 to Ø37: Rear screw mounting Ø37: front clip mounting. (2) Ø6 to Ø7: clip mounting to 3200 Handle type Front operation Direction of operation Door drilling S5 type with V Escutcheon CSTELL K Ø 6, Ø x Ø 6.5 Ø 31 3 x Ø 6.5 poign_023_a_1_gb_cat General Catalogue

18 Bypass 125 to 200 Front operation Handle type S2 type Direction of operation 0 Door drilling RONS EL11P CSTELL K Ø Ø D (1) Ø 5.5 Ø Ø poign_032_a_1_gb_cat (1) Ø31 to Ø37: Rear screw mounting Ø37: front clip mounting. Bypass 250 to 630 Front operation Handle type S3 type Direction of operation 0 Door drilling RONS EL11P CSTELL K Ø Ø D (1) Ø 26 4 Ø Ø poign_033_a_1_gb_cat (1) Ø31 to Ø37: Rear screw mounting Ø37: front clip mounting. Bypass 800 to 1600 Front operation Handle type C type Direction of operation 4 Ø Door drilling CSTELL K Ø x Ø 6.5 Ø 31 3 x Ø 6.5 poign_022_a_1_gb_cat General Catalogue