Industrial circular connectors

Industrial circular connectors M 16 M 58 010

CONINVERS - M16 to M58 circular connectors for industrial applications CONINVERS GmbH, an independent company, is the specialist for M16 to M58 circular connectors within the PHOENIX CONTACT group of companies. We develop and manufacture circular connectors for the cabling of industrial systems, electrical drives, motor connections, manufacturing machines and machine tools at our headquarters in Herrenberg, located to the south of Stuttgart. We are there to help you. In Germany, our products are distributed through a network of over 70 regional sales partners. Internationally, we support you with more than 40 branches and over 0 agencies of the PHOENIX CONTACT Group. Quality is our topmost objective. With a process-oriented, integrated management system based on international standards, we make sure that laws and standards as well as customer demands are taken into account when manufacturing our products. CONINVERS is certified in accordance with: DIN EN ISO 9001:000, EN ISO 14001:005 and OHSAS 18001:1999.

Table of contents Overview of circular connectors Get a quick overview of the entire range of circular connectors for signal and power applications from M16 to M58. CONINVERS 4 Modular signal plug connectors Create your own signal plug connector with M or bayonet connection individually for your application. CONINVERS signal RC, UC, TU series 11 Signal plug connectors Cable, coupling and appliance plug connectors fully preassembled with M16, M17, M and M7 - M17, optionally with SPEEDCON quick locking. CONINVERS signal PV, ST, RF, HC series 9 Power connectors Cable, coupling and appliance plug connectors fully preassembled with M17, M, M40, and M58 to 150 A - M17 and M40 optionally with SPEEDCON quick locking. CONINVERS power P0, P0, P70, P150 series 8 Tools and accessories Crimping tools and automatic devices for punched-rolled and turned contacts of all series, assembly tools and other accessories. 19 Ordering examples and type descriptions 156 Register Alphabetical Numerical 16 CONINVERS

The CONINVERS product range from M16 to M58 Product overview - Signal plug connectors A wide range of connector solutions of the M17, M or M7 types are available for signal transmission. Versions with bayonet or SPEEDCON locking are available for faster connections. M - RC series shielded / unshielded Modular signal plug connectors - CONINVERS signal M - UC series with universal shielding Bayonet - TU series with universal shielding Description Modular design A wide range of housing types and connector pin assignments with various contact connection methods The connectors are delivered as individual components housing, EMC screw connection, contact insert Cable Ø.0... 10.5 mm, shielded Cable Ø 4.0... 14.0 mm, unshielded Modular design More cabling space for larger cable diameters Universal shield and cable clamping The connectors are delivered as individual components - housing, contact insert Cable Ø.0... 14.5 mm, shielded Modular design Easily accessible as well as rugged bayonet locking The TU series is based on the UC connectors with a larger cabling space and a universal shield The connectors are delivered as individual components - housing, contact insert Cable Ø.0... 14.5 mm, shielded Housing types Cable plug connectors/coupling connectors Cable plug connectors, angled Coupling connectors for mounting on the wall Appliance plug connectors for front mounting: straight, angled rotatable Appliance plug connectors for rear mounting: straight Cable plug connectors/coupling connectors Cable plug connectors, angled Coupling connectors for mounting on the wall Fully compatible with the RC appliance plug connectors Cable plug connectors/coupling connectors Coupling connectors, angled Appliance plug connectors for front mounting: straight Appliance plug connectors for rear mounting: straight Number of positions 6 / 7 / 9 (6+) / 9 (8+1) / 1 / 16 / 17 / 19 (16+) / 19 (16++PE) All housings can be equipped with a pin or a socket 6 / 7 / 9 (6+) / 9 (8+1) / 1 / 16 / 17 / 19 (16+) / 19 (16++PE) All housings can be equipped with a pin or a socket 6 / 7 / 9 (6+) / 9 (8+1) / 1 / 16 / 17 / 19 (16+) / 19 (16++PE) All housings can be equipped with a pin or a socket Contact connection Solder contacts:.5 mm / AWG 14 Crimp contacts: 0,14....5 mm / AWG 6-14 Screw contacts: 1.0 mm / AWG 18 Solder-in contacts for appliance plug connectors Solder contacts:.5 mm / AWG 14 Crimp contacts: 0,14....5 mm / AWG 6-14 Screw contacts: 1.0 mm / AWG 18 Solder contacts:.5 mm / AWG 14 Crimp contacts: 0,14....5 mm / AWG 6-14 Screw contacts: 1.0 mm / AWG 18 Solder-in contacts for appliance plug connectors Surge voltage category (reference: DIN EN 61984:001) II II II Degree of protection (when locked) shielded IP67 unshielded IP65 - IP68 IP67 IP67 Pollution degree (reference: DIN EN 61984:001) 1) 1) 1) Ordering information starting page 16 starting page 18 starting page 8 1) The values specified require a correctly locked pair of connectors that are disconnected only for testing and maintenance. If an unlocked connector is exposed to ambient conditions and if there is a danger of contamination, the connector should be sealed using an IP54 protective cap. 4 CONINVERS

The CONINVERS product range from M16 to M58 Product overview - Signal plug connectors Signal plug connectors - CONINVERS signal M17 - ST series shielded M - RF series shielded M7 - HC series with universal shielding Description Extremely compact connectors for general industrial applications M17 quick locking SPEEDCON, optionally M17 x 1 control thread Time-saving lateral contact clip-in Special tools not required Extremely quick shield connection without splicing Cable Ø.5... 10 mm Universal industrial connectors M x 1 control thread (SPEEDCON quick locking in preparation) Time-saving lateral contact clip-in Special tools not required Extremely quick shield connection without splicing Cable Ø.0... 1. mm High-position signal plug connectors M7 x 1 screw locking Connectors are delivered with solder, solder-in and crimp connection Universal shield and cable clamping Cable Ø.0... 14.5 mm Housing types Cable plug connectors/coupling connectors Appliance plug connectors for front mounting: straight, angled fixed, angled rotatable Compact flange dimensions: 1 mm x 1 mm / 5 mm x 5 mm, Connector Ø 1 mm Cable plug connectors/coupling connectors Appliance plug connectors for front mounting: straight, angled fixed, angled rotatable Connector Ø 6 mm, Cable plug connectors and coupling connectors as well as straight appliance plug connectors also available with stainless steel housings (1.405) Cable plug connectors/coupling connectors Appliance plug connectors for front and rear mounting Number of positions 17 All housings can be equipped with a pin or a socket 1 / 16 / 17 All housings can be equipped with a pin or a socket 6 / 6 (5+PE) / 8 All housings can be equipped with a pin or a socket Contact connection Crimp contacts turned: 0.08... 0.5 mm / AWG 8-0 Crimp contacts turned: 0.08... 1.0 mm / AWG 8-18 Crimp contacts punched (taped): 0.08... 0.56 mm / AWG 8-0 Crimp contacts: 0.08... 1.0 mm / AWG 8-18 Solder contacts: 1.0 mm / AWG 18 Surge voltage category (reference: DIN EN 61984:001) III III II Degree of protection (when locked) IP67 IP67 IP67 Pollution degree (reference: DIN EN 61984:001) 1) 1) 1) Ordering information starting page 46 starting page 58 starting page 74 1) The values specified require a correctly locked pair of connectors that are disconnected only for testing and maintenance. If an unlocked connector is exposed to ambient conditions and if there is a danger of contamination, the connector should be sealed using an IP54 protective cap. CONINVERS 5

The CONINVERS product range from M16 to M58 Product overview - Power connectors M17, M, M40 and M58 type power connectors are available. The range offers ideal combinations for connecting electrical drive components with transmission capacities of up to 150 A at 60 V in a short period of time. M17 - P0 series Power connectors - CONINVERS power M - P0 series Description Electrical capacities of up to 60 V can be transmitted at 0 A Extremely compact connectors for general industrial applications M17 quick locking SPEEDCON, optionally M17 x 1 control thread Time-saving lateral contact clip-in Special tools not required Extremely quick shield connection without splicing Cable Ø.5... 10 mm Electrical capacities of up to 50/60 V can be transmitted at 9/0 A Complete range of flexible machine and system cabling M x 1 control thread (quick locking SPEEDCON in preparation) Time-saving lateral contact clip-in Cable Ø 7.5... 18 mm Housing types Cable plug connectors/coupling connectors Appliance plug connectors for front mounting: straight, angled fixed, angled rotatable Compact flange dimensions: 1 mm x 1 mm / 5 mm x 5 mm Connector Ø 1 mm Cable plug connectors/coupling connectors Coupling connectors for mounting on the wall Panel feed-throughs Appliance plug connectors for front mounting: straight, angled fixed, angled rotatable Number of positions 4 (+PE) / 6 (5+PE) / 7 (6+PE) / 8 (7+PE) / 9 (5++PE) All housings can be equipped with a pin or a socket 6 (5+PE) / 8 (4++PE) Contact connection Crimp contacts turned: 0.08....5 mm / AWG 8-14 Crimp contacts punched (taped): 0.08... 0.56 mm / AWG 8-0 Crimp contacts turned: 0.08... 4.0 mm / AWG 8-1 Crimp contacts punched (taped): 0.08....5 mm / AWG 8-14 Surge voltage category (reference: DIN EN 61984:001) III III Degree of protection (when locked) IP67 IP67 Pollution degree (reference: DIN EN 61984:001) 1) 1) Ordering information starting page 90 starting page 10 1) The values specified require a correctly locked pair of connectors that are disconnected only for testing and maintenance. If an unlocked connector is exposed to ambient conditions and if there is a danger of contamination, the connector should be sealed using an IP54 protective cap. 6 CONINVERS

The CONINVERS product range from M16 to M58 Product overview - Power connectors Power connectors - CONINVERS power M40 - P70 series M58 - P150 series Electrical capacities of up to 50/60 V can be transmitted at 0/70 A Complete range of flexible machine and system cabling M40 x 1.5 control thread, M40 fast locking SPEEDCON Time-saving lateral contact clip-in Cable Ø 9.0... 6.5 mm Electrical capacities of up to 50/60 V can be transmitted at 1/150 A M58 x control thread Time-saving lateral contact clip-in Extremely fast shield connection Cable 17.0... 6.0 mm Cable plug connectors/coupling connectors Coupling connectors for mounting on the wall Panel feed-throughs Appliance plug connectors for front mounting: straight, angled fixed, angled rotatable Cable plug connectors Coupling connectors Panel feed-throughs Appliance plug connectors for front mounting: straight 6 (++PE) / 8 (4++PE) 6 (++PE) / 8 (4++PE) Crimp contacts turned: 0.14... 10 mm / AWG 6-8 Crimp contacts turned: 0.75... 50 mm / AWG 18-1 III III IP67 IP67 starting page 118 starting page 14 CONINVERS 7

The CONINVERS product range from M16 to M58 Product overview - Signal and power connectors, plastic-molded Plastic molded connectors in the M16, M and M7 types are available for signal and power transmission. Plastic molded connectors are manufactured on request due to the variety of conductor types that can be used. M16 - KPV series Signal plug connectors M - KRC series Description Standard cable assemblies and conductor lengths (5 m / 10 m) Rugged PUR molding M16 x 0.75 screw locking The connectors are delivered with ready-to-use connecting cables, e.g. as a central plug-in connection for distributor systems Cable assemblies and conductor lengths as per customer specifications Cable Ø approx. 4.8... 1.1 mm PUR molding on one or both ends M x 1 screw locking With or without EMC protection The connectors are delivered with ready-to-use connecting cable Housing types Cable socket (female) straight, Cable socket (female) angled, Cable connector (male) straight, Cable connector (male) angled, Suitable appliance plug connector, solder/solder-in connection PV series. Cable plug connectors/coupling connectors Cable plug connectors/coupling connectors, angled Compatible with the RC series appliance plug connectors Number of positions 8 / 10 / 1 / 14 6 / 7 / 9 (6+) / 9 (8+1) / 1 / 1 (11+PE) / 16 / 17 / 19 (16+) / 19 (16++PE), All housings can be equipped with a pin or a socket Contact connection 0.4 mm / 0.75 mm / AWG -18 for standard cable assembly Solder or crimp Surge voltage category (reference: DIN EN 61984:001) II II Degree of protection (when locked) IP67 IP67 Pollution degree (reference: DIN EN 61984:001) 1) 1) Ordering information Customer-specific after consulting technicians Customer-specific after consulting technicians 1) The values specified require a correctly locked pair of connectors that are disconnected only for testing and maintenance. If an unlocked connector is exposed to ambient conditions and if there is a danger of contamination, the connector should be sealed using an IP54 protective cap. 8 CONINVERS

The CONINVERS product range from M16 to M58 Product overview - Signal and power connectors, plastic-molded Power connectors M7 - KHC series M - KSC series Cable assemblies and conductor lengths as per customer specifications Cable Ø approx. 4.8... 1.1 mm PUR molding on one or both ends M7 x 1 screw locking With or without EMC protection The connectors are delivered with ready-to-use connecting cable Cable assemblies and conductor lengths as per customer specifications Cable Ø approx. 4.8... 1.1 mm PUR molding on one or both ends M x 1 screw locking The connectors are delivered with ready-to-use connecting cable Cable plug connectors/coupling connectors Cable plug connectors, angled Suitable HC series appliance plug connectors Cable plug connectors/coupling connectors Cable plug connectors/coupling connectors, angled 6 / 6 (5+PE) / 8 All housings can be equipped with a pin or a socket 6 (5+PE) / 8 (4++PE) Solder or crimp Crimp contacts: 0.08....5 mm / AWG 8-14 II II IP67 IP67 1) 1) Customer-specific after consulting technicians Customer-specific after consulting technicians CONINVERS 9

10 CONINVERS

Modular signal plug connectors CONINVERS signal The modular signal plug connectors are suitable for industrial applications and have an M locking thread. The TU series with bayonet locking is offered as a version with quick locking. The modular circular signal connectors are available with crimp, screw, solder and solderin connection for direct PCB mounting. The UC series signal plug connectors, also with M locking, have an extended cable entry range and universal EMC shield connection. The TU series signal plug connectors are based on the UC connectors, but have a bayonet quick locking system. The individual plug connector is put together from a limited number of articles using three components: Housing Cable gland, including the seal, the strain relief and the optional shield connection Contact insert, including the contact carrier and the contacts The modular signal plug connectors are delivered as individual components. All housings can be equipped with male or female contacts. Table of contents Mechanical and electrical data of the RC, UC and TU series 1 M - RC and UC series Selection guide 14 Cable plug connector and coupling connector housing 16 Appliance plug connector housing, front mounting 0 Appliance plug connector housing, rear mounting Shield accessories Bayonet - TU series Selection guide 6 Cable plug connector and coupling connector housing 8 Appliance plug connector housing, front and rear mounting 9 Contact inserts - RC, UC and TU series Contact inserts with solder, screw and crimp contacts Crimp contact carriers and crimp contacts 4 Contact inserts with solder-in contacts 6 CONINVERS 11

Modular signal plug connectors - CONINVERS signal M/bayonet - RC, UC and TU series Mechanical and electrical data Mechanical data Housing material: Insulating bodies: Contact material: Contact surface: Contact connection method: Gasket and O ring: Flat gasket: Temperature range: Conductor entry: Locking type: Mechanical insertion/withdrawal cycles: Degree of protection (when locked): Approval: Metal parts: CuZn (copper-zinc alloy) or GD-Zn (zinc die-cast), nickel-plated or yellow passivated Appliance plug connector, angled rotatable: nickel-plated/thick layer passivated, can be painted over Plastic adapter caps/plastic-sheathed metal parts: SPS (syndiotactic polystyrene) Thermoplastic polyester (PBT), polyamide (PA 66), polycarbonate (PC) Storage at 15 C... 5 C, 40... 70 % rel. humidity Copper-zinc alloy (CuZn) Nickel-plated (Ni) with a gold layer (Au) Solder cup, crimp and screw versions, solder-in pin Fluorine rubber (FPM) Housing types with plastic adapter cap: perbunane (NBR) gasket Perbunane (NBR with fabric insert), fluorine rubber (FPM) -0 C... +15 C EMC version for external cable diameter... 10.5 mm, without EMC protection for external cable diameter 4... 14 mm EMC version with extended cable entry range (UC / TU series) for external cable diameter... 14.5 mm M screw locking, TU series: bayonet locking, bayonet ring Ø 9. mm Standard: 50, more on request EMC version: IP67 Version without EMC protection: IP65... IP68 (depending on cable gland) An overview of the listed connectors as per UL, cul and VDE will be available on request. Electrical data Number of positions 6, 7 9 (8+1) 9 (6+) 1 16 17 19 (16+) Contacts 6, 7 8 + 1 6 + 1 16 17 16 + Contact Ø [mm] 1 1 1 1 1 1 1,5 Stranded wire cross section Solder connection: contacts x [mm /AWG] max. 6 (7) x.5/14 8 x 1.0/18 + 1 x.5/14 6 x 1.0/18 + x.5/14 1 x.5/14 16 x 1.0/18 17 x 1.0/18 16 x 1.0/18 + x 1.0/18 Crimp connection: contacts x [mm /AWG] max. 6 (7) x.5/14 8 x 0.56/0 + 1 x.5/14 1 x 0.56/0 16 x 0.56/0 17 x 0.56/0 16 x 1.0/18 + x 1.5/16 Screw connection: contacts x [mm /AWG] max. 6 (7) x 1.0/18 8 x 0.75/18 + 1 x 1.0/18 Nominal current per contact at 5 C 1 ) 0 8 0 8 0 8 8 8 8 10 Specifications as per DIN EN 61984:001 Nominal/rated voltage [V] 00 00 150 150 150 150 150 Test/surge voltage [kv AC],5,5 1,5 1,5 1,5 1,5 1,5 Surge voltage category II II II II II II II Pollution degree ) Installation height [m] Up to,000 Up to,000 Up to,000 Up to,000 Up to,000 Up to,000 Up to,000 1) If required, the effective current carrying capacity must be determined according to the application using a derating curve. ) The values specified require a correctly locked pair of connectors that are disconnected only for testing and maintenance. If an unlocked connector is exposed to ambient conditions and if there is a danger of contamination, the connector should be sealed using a IP 54 protective cap. Derating curve based on DIN EN 6051-5- Cable plug connector (1-pos.) RC series shield attenuation curve based on DIN EN 5089-1-6 Shield attenuation curve UC / TU series based on DIN EN 5089-1-6 Current [A] 9 8 7 6 5 4 1 = x0,5mm² = 6x0,5mm² = 9x0,5mm² 1 4 = 1x0,5mm² 0 0 0 40 60 4 80 100 1 10 Attenuation [db] 100 80 60 40 0 0 10 100 1000 Attenuation [db] 100 80 60 40 0 0 10 100 1000 Ambient temperature [ C] Frequency [MHz] Frequency [MHz] Note: Plug connectors may only be inserted or removed when the power supply is disconnected. Note: The modular M connectors of the RC and UC series are completely compatible. After technical clarification, these can also be combined with the M complete plug connectors of the RF series. 1 CONINVERS

Modular signal plug connectors - CONINVERS signal M/bayonet - RC, UC and TU series Connector pin assignments and coding Contact insert numbering (view of plug-in side) Direction of rotation of contact insert numbering (view of plug-in side) N 8 1 7 9 6 PO N 1 8 9 7 SO 6 N 1 8 9 7 SO 6 N 8 1 7 9 6 SO 5 4 4 5 4 5 5 4 Clockwise (standard) Counter-clockwise (standard) Counter-clockwise (opposite) Clockwise (opposite) Number of positions Pin Socket Pin Socket 6-pos. Solder / crimp / screw 7-pos. Solder / crimp / screw 6 N 6 N 5 7 1 1 4 PO 6 N 6 N 5 7 1 1 4 PO 7 5 4 SO 7 5 4 SO N N 9-pos. (6+) Solder 8 1 7 9 6 PO 5 4 1 4 9 SO 8 5 7 6 N N N N 9-pos. (8+1) 8 7 1 9 1 9 8 7 1 8 9 7 8 7 1 9 Solder / crimp / screw 6 PO 5 4 SO 6 4 5 PO 6 4 5 6 SO 5 4 N N N N 1-pos. 7 8 9 1 1 10 1 9 8 10 1 7 1 9 8 10 1 7 7 8 9 1 1 10 Solder / crimp 6 PO 11 5 4 SO 11 4 5 6 PO 11 4 5 6 6 SO 11 5 4 16-pos. Solder N X Y 11 1 1 10 16 1 9 15 PO 14 8 4 7 5 6 N Y 1 X 11 1 1 16 10 9 14 SO 15 4 8 5 7 6 N N 16-pos. Crimp 11 1 1 10 16 1 9 15 PO 14 8 4 7 5 6 1 11 1 1 16 10 9 14 SO 15 4 8 5 7 6 17-pos. Solder N X Y 11 1 1 10 16 1 9 15 17 14 8 4 7 5 6 N Y 1 X 11 1 1 16 10 9 14 4 17 15 8 5 7 6 N Y 1 X 11 1 1 16 10 9 14 4 17 15 8 5 7 6 N X Y 11 1 1 10 16 1 9 15 17 14 8 4 7 5 6 N N 17-pos. Crimp 11 1 1 10 16 1 9 15 17 14 8 4 PO 7 5 6 1 11 1 1 16 10 9 14 4 17 15 8 SO 5 7 6 N N 19-pos. (16+) Solder / crimp 1 11 1 9 10 17 18 1 19 16 PO 8 14 4 15 7 5 6 1 1 18 11 1 17 19 10 16 9 SO 4 14 8 15 5 7 6 Note: Other coding versions can be configured manually or mechanically on request. The RC/UC/TU series connectors can be equipped with male or female contacts according to the application. For reasons pertaining to safety, only female contacts may be used in the live part of the connector. CONINVERS 1

Modular signal plug connectors - CONINVERS signal M - RC, UC series Selection guide The product chart shows the possible combinations of cable plug connector housings and coupling connector or appliance plug connector housings. The chart differentiates between shielded and unshielded connectors. The modular system makes it possible to select an individually suitable connector from a limited number of articles. To describe a connector for the device and panel mounting side, the housing is supplemented with the corresponding cable gland and the contact insert, including the contacts. The product chart provides an overview of the available components. Unshielded with universal shielding Shielded Housing type Cable plug connector housing, page 16 RC-000000080FZ RC-0000000K0FZ NC-0000000KSFZ Coupling connector housing, page 16 RC-000000090FZ Coupling connector housing for mounting on the wall Cable plug connector housing, page 18 UC-00000008.DU UC-0000000R.DU Coupling connector housing, page 19 UC-00000009.DU, UC-0000000F.DU Cable plug connector housing, page 17 UC-0000000T.DU UC-0000000N.DU RC-0000000M0FZ Front mounting, page 0 Rear mounting, page RC-0000000BFZ RC-00000001.00 RC-0000000C0FZ Rear mounting, UC-0000000Q.DU RC-0000000T0FZ Coupling connector housing for wall mounting, page 19 Coupling connector housing, page 17 Rear mounting, RC-00000007.00 RC-0000000Q0FZ RC-0000000Z.00 Appliance plug connector housing Front mounting, from page 0 onwards Front mounting, Rear mounting, page unshielded, page 0 Shielded RC-0000000WQ00 RC-00000006100 RC-000000000 RC-0000000500 RC-0000000400 RC-0000000H000 RC-0000000E000 RC-0000000AD00 14 CONINVERS

Modular signal plug connectors - CONINVERS signal M - RC, UC series Cable glands / shield accessories Cable clamp type cage / shield adapter page 4. Contact inserts incl. contacts Solder contact inserts, page 6 to 19-pos. Pin Socket The connectors are equipped with a universal shield connection for cable diameters of up to 14.5 mm. Shielded cable glands with a cable clamp type cage and shield adapters are not required. Cable glands unshielded, page 5 with Pg and metric connecting threads Cable glands are not required for appliance plug connector housings. All housings can be equipped with male or female contacts All housings can be equipped with male or female contacts Crimp contact inserts, from page onwards 6 to 19-pos. Direct PCB connection, from page 6 onwards with 6 to 17-pos. solder-in contacts Housing type M Pin Screw contact inserts, page 6, 7 and 9-pos. Pin Pin Free solder pin length A [mm] B [mm] Socket Socket Socket C [mm] D [mm] RC-...00.5 4.5 10 17.5 RC-...WQ00.5 4.5 10 17.5 RC-...400.5 4.5 10 17.5 RC-...500.5 4.5 10 17.5 RC-...H000.5 11 RC-...E000.5 11 Note: For reasons pertaining to safety, only female contacts may be used in the live part of the connector. CONINVERS 15

Modular signal connectors - CONINVERS signal M - RC series Cable and coupling plug connector housings, shielded The M cable and coupling plug connectors in EMC version allow the connection of shielded cables with external diameters of mm... 10.5 mm. The connectors fulfill the IP67 degree of protection when locked due to the special cable clamping. RC-0000000.0FZ RC-0000000.0FZ Cable plug connector housing, shielded Coupling plug connector housing, shielded Description Cable plug connector housing, straight, shielded, with plastic sheath for additional protection against accidental contact Cable plug connector housing, straight, shielded, metal Cable plug connector housingstraight, shielded, plastic cap Cable plug connector housing, angled, shielded, metal Coupling plug connector housing, straight, shielded, with plastic sheath for additional protection against accidental contact Coupling plug connector housing, straight, shielded, metal RC-0000000K0FZ 159865 0 RC-000000080FZ 159680 0 NC-0000000KSFZ 15900 0 RC-0000000T0FZ 15999 10 RC-0000000M0FZ 159899 0 RC-000000090FZ 159750 0 Contact inserts Order separately, see page onwards Order separately, see page onwards Cable clamping / shield accessories Order separately, see page Order separately, see page 60 O 6 5,7 5,4 4 50,5 O 8 Mx1 0 4 RC-0000000K0FZ RC-0000000T0FZ RC-000000090FZ 51,1 5,7 55 O 6 O 6 Mx1 0 1 0 RC-000000080FZ NC-0000000KSFZ RC-0000000M0FZ 16 CONINVERS

Modular signal connectors - CONINVERS signal M - RC series Cable and coupling plug connector housing, unshielded The unshielded cable and coupling plug connector housings are supplemented by cable glands with PG or metric threads. These are screwed onto the adapter cover from outside and fulfill the requirements of the IP65... IP68 degree of protection depending on the type. R.-0000000..00 R.-00000007.00 Cable plug connector housing, unshielded Coupling plug connector housing, unshielded Description Cable entry Cable plug connector housing, straight, unshielded, metal, connection thread: Pg9 RC-00000001100 15955 0 Pg11 RC-0000000100 15959 0 Pg1.5 RC-0000000100 159546 0 Cable plug connector housing, angled, 4 x 90 codable, unshielded, metal, connection thread: M16x1.5 RM-00000001100 160706 0 M0x1.5 RM-0000000100 160509 0 Pg9 RC-0000000Z100 15907 10 Pg11 RC-0000000Z00 159040 10 Pg1.5 RC-0000000Z00 159044 10 M16x1.5 RM-0000000Z100 160709 10 M0x1.5 RM-0000000Z00 160700 10 Coupling plug connector housing, straight, unshielded, metal, connection thread: Pg9 RC-00000007100 159618 0 Pg11 RC-0000000700 15961 0 Pg1.5 RC-0000000700 15966 0 M16x1.5 RM-00000007100 160707 0 M0x1.5 RM-0000000700 160708 0 Contact inserts Order separately, see page onwards Order separately, see page onwards Cable clamping Order separately, see page Order separately, see page 58 O 6 0 41 51,4 4 50, O 6 Mx1 RC-0000000Z.00, RM-0000000Z.00 0 RC-00000001.00, RM-00000001.00 4 4 RC-00000007.00, RM-00000007.00 CONINVERS 17

Modular signal connectors - CONINVERS signal M - UC series Cable plug connector housing, universally shielded, cable entry up to 14.5 mm Like the RC series, the UC series is completely modular in structure. This means that a wide variety of connectors can be implemented from a small number of different components. Both are M connectors with comparable technical specifications. The UC series uses the same insulation bodies in all pin assignment versions. In comparison to the RC series, the UC series provides more wiring space and can accommodate bigger cable diameters. Unlike the RC series, the shielding function and the cable clamping are universal. It is not necessary to adjust the shielding elements to the cables used. This facilitates termination in the field. Cable and coupling housings with an additional thread can be equipped with another cable strain relief (double bracket) for exceptional loads. Connectors in the UC series are equipped with a universal shield connection. Shield accessories with a cable clamp type cage and shield sleeve are not required. Additional strain reliefs (double bracket) as well as fixed gaskets are ordered separately. Description Cable entry Cable plug connector housing, straight Cable plug connector housing, angled UC-0000000..DU Cable plug connector housing, with universal shielding Universal gasket, Ø.0... 14.5 mm UC-000000080DU 160600 0 with thread for additional strain relief, Pg1.5 UC-0000000RDU 1606058 0 with thread for additional strain relief, Pg16 UC-0000000RNDU 1606061 0 Universal gasket, Ø.0... 14.5 mm UC-0000000T0DU 1606065 8 with thread for additional strain relief, Pg1.5 UC-0000000NDU 1606047 8 with thread for additional strain relief, Pg16 UC-0000000NNDU 1606050 8 Contact inserts Order separately, see page onwards Cable gland (additional strain relief) Order separately, see page 59,9 7,4 O 6 Ø 6 4 4 4 60, 4 60, UC-0000000T0DU UC-0000000NDU, UC-0000000NNDU 59 71,5 O 6 Ø 6 4 4 4 4 UC-000000080DU UC-0000000RDU, UC-0000000RNDU 18 CONINVERS

Modular signal connectors - CONINVERS signal M - UC series Coupling plug connector housing, universally shielded, cable entry up to 14.5 mm Connectors in the UC series are equipped with a universal shield connection. Shield accessories with a cable clamp type cage and shield sleeve are not required. Additional strain reliefs (double bracket) as well as fixed gaskets are ordered separately. UC-0000000..DU Coupling plug connector housing, with universal shielding UC-0000000Q.DU Coupling plug connector housing, with universal shielding, rear mounting Description Cable entry Coupling plug connector housing, straight Universal gasket, Ø.0... 14.5 mm UC-000000090DU 1606040 0 with thread for additional strain relief, Pg1.5 UC-0000000FDU 1607069 0 with thread for additional strain relief, Pg16 UC-0000000FNDU 1606046 0 Coupling plug connector housing, straight, rear mounting, with central fixing nut Universal gasket, Ø.0... 14.5 mm UC-0000000Q0DU 160605 10 with thread for additional strain relief, Pg1.5 UC-0000000QDU 1607070 10 with thread for additional strain relief, Pg16 UC-0000000QNDU 160708 10 Contact inserts Order separately, see page onwards Order separately, see page onwards Cable gland (additional strain relief) Order separately, see page Order separately, see page (61,) 6, 5,5 61, Mx1 Mx1 4 4 UC-000000090DU 4 UC-0000000Q0DU (Axial O-ring) (7,8) 6, 47,5,5 7,8 4+0,1 Mx1 Mx1 Ø5+0,1 max. 6,5mm 4 4 4 Installation dimensions: UC-0000000Q.DU (Axial O-ring) UC-0000000FDU, UC-0000000FNDU UC-0000000QDU, UC-0000000QNDU (Axial O-ring) CONINVERS 19

Modular signal connectors - CONINVERS signal M - RC series, compatible to UC series Appliance plug connector housing, front mounting In the case of front mounting, the panel mounting base is fitted to the device from outside using screws, nuts or screw-in threads. On the device side, the contact insert then establishes a connection to the device. RC-0000000..00 RC-0000000BFZ Appliance plug connector housing, front mounting Coupling plug connector housing, front mounting Description Wall thickness [mm] Appliance plug connector housing, front mounting, straight, flat gasket (self-adhesive), 4-hole mounting, for shielded applications from 1 onwards RC-000000000 159574 40 Appliance plug connector housing, front mounting, straight, radial O-ring, 4-hole mounting, reinforced mounting flange, for shielded applications from onwards RC-0000000WQ00 15901 40 Coupling plug connector housing, front mounting, straight, shielded, 4-hole mounting and O-ring, for panel feed-through of a shielded line... 7 RC-0000000BFZ 159781 10 Contact inserts Order separately, see page onwards Order separately, see page onwards Cable clamping / shield accessories Order separately, see page (5,4),,5 5 19,8, 1,1 5 19,8 1, 1,5 1 5 19,8 M M M Ø 4x,7 4x,7 Ø 4x,7 RC-0000000WQ00 Radial O-ring RC-0000000BFZ Radial O-ring RC-000000000 Flat gasket 19,8±0,1 19,8±0,1 19,8±0,1 Ø,7 Ø,7 Ø,7 1x15 Ø0+0,1 1x15 Ø0+0,1 Ø0+0,1 min. mm min. mm Installation dimensions Radial O-ring Installation dimensions Radial O-ring Installation dimensions Flat gasket 0 CONINVERS

Modular signal connectors - CONINVERS signal M - RC series, compatible to UC series Appliance plug connector housing, front mounting The panel mounting base, angled, rotatable and panel mounting base with central fixing nut cannot be combined with solder-in contacts. RC-00000006100 Appliance plug connector housing, front mounting RC-0000000AD00 Appliance plug connector housing, angled, rotatable, front mounting Description Wall thickness [mm] Appliance plug connector housing, front mounting, straight, central fastening thread M0 x 1.5, for shielded applications min. 0.8 RC-00000006100 159604 40 Appliance plug connector housing, front mounting, angled, rotatable, 4-hole mounting, for shielded applications RC-0000000AD00 159777 16 Contact inserts Order separately, see page onwards Order separately, see page onwards Mx1 1 98 7 4,65 1,85 19,8±0,1 4xM 5,4 Ø, RC-0000000AD00 Axial O-ring 19,8 6 Edge abrasion max. 0. Ø0+0,1 Installation dimensions: RC-0000000AD00 0, 6,5 Ø 6 M0x1,5 min. Ø0+0,1 min. 0,8 M M0x1,5 Ø 7 4 19+0,1 4 RC-00000006100 Axial O-ring RC-00000006100, mounting feed-through hole with thread (recommended for installation in steel sheet panel) RC-00000006100, mounting hole with polarization and locking nut (recommended for installation in steel sheet panel) CONINVERS 1

Modular signal connectors - CONINVERS signal M - RC series, compatible to UC series Appliance plug connector housing, rear mounting Connector housings for rear mounting are designed for the efficient installation of preassembled PCBs, for instance. These types are fed through the mounting panel from the inside and screwed tight from the outside. RC-0000000..00 Appliance plug connector housing, rear mounting RC-0000000.0FZ Coupling plug connector housing, rear mounting Description Wall thickness [mm] Appliance plug connector housing, rear mounting, low design, threaded flange, radial O-ring, 4-hole thread mounting (Ø.5).7....5 RC-0000000400 159589 40 Appliance plug connector housing, rear mounting, low design, drilling flange, radial O-ring, 4-hole mounting (Ø.7).7....5 RC-0000000500 159599 40 Appliance plug connector housing, rear mounting high design, threaded flange, with mm flange, radial O-ring, 4-hole thread mounting (M)... 10,5 RC-0000000E000 15981 40 Appliance plug connector housing, rear mounting, high design, central fixing nuts, axial O-ring up to 6.5 RC-0000000H000 1598 0 Coupling plug connector housing, rear mounting, shielded, 4-hole thread mounting (M,5), flat gasket, for panel feed-through of a shielded line up to.5 RC-0000000C0FZ 159790 0 Coupling plug connector housing, rear mounting, shielded, central fixing nuts, axial O-ring, for panel feed-through of a shielded line up to 6.5 RC-0000000Q0FZ 15994 10 Contact inserts Order separately, see page onwards Order separately, see page onwards Cable clamping / shield accessories Order separately, see page (5,4) (,) 0,8 1,5 5 0,5 (8,8) 5,8 5 0,5 0,8,5,6 5 0,5 M M M 4xM,5 Ø,7 RC-0000000400, RC-0000000500 Radial O-ring RC-0000000E000 Radial O-ring 4xM 4xM,5 RC-0000000C0FZ Flat gasket (8,8) 6,,5 0 6, (5,4) 7,1,5 0 M Ø M Ø RC-0000000H000 Axial O-ring RC-0000000Q0FZ Axial O-ring CONINVERS

Cable glands, unshielded Modular signal connectors - CONINVERS signal M - RC series, compatible to UC series Various cable glands with PG and metric threads are available for unshielded connectors. These are screwed into the adapter cover from the outside. Suitable versions are available for external cable diameters from mm to 14 mm. Ordering Information: The cable entry of the coupling and cable plug connector housings must correspond to the cable glands. A 9-core, unshielded cable is to be adapted with the RC-00000007100 coupling housing. External cable diameter D = 8 mm If a PG cable gland in accordance with DIN 460 is to be selected, the RC-Z091 type corresponding to PG 9 for external cable diameters from 6 mm to 10 mm fulfills the requirements optimally. Description Cable gland for unshielded applications in accordance with DIN 460, IP65 Cable entry / cable Ø D [mm] RC-Z... Cable glands with Pg/metric threads Pg9 / 6... 10 RC-Z091 16044 0 Pg11 / 8... 1 RC-Z09 160445 0 Pg1,5 / 10... 14 RC-Z09 160447 0 M16 x 1.5 /... 10 RC-Z406 1607015 0 M0 x 1,5 / 4... 14 RC-Z409 1604479 0 Cable gland with double bracket strain relief, for unshielded applications, IP65 Pg9 / 6... 10 RC-Z051 16041 0 Pg11 / 8... 1 RC-Z05 160416 0 Pg1,5 / 10... 14 RC-Z05 160418 0 Cable gland for unshielded applications, IP68, with PVC gasket sleeve M16 x 1.5 /... 10 RC-Z407 1607016 0 M0 x 1,5 / 4... 14 RC-Z410 1604481 0 Pg9 / 6,5... 9 RC-Z191 16044 0 Pg11 / 7... 10,5 RC-Z196 16048 0 Pg1,5 / 9... 1 RC-Z0 160445 0 M16 x 1.5 / 6.5... 9 RC-Z414 1607018 0 M0 x 1,5 / 9... 1 RC-Z417 1607019 0 0,5±0,1 0,5±0,1 Ø+0,1 Ø,7/Ø, M,5,7mm,5mm mm 10,5mm 1x15 Installation dimensions: RC-...400, RC-...500 Radial O-ring Ø+0,1 Ø,7/Ø, M,5 max.,5mm Installation dimensions: RC-...C0FZ Flat gasket 4+0,1 Ø5+0,1 max. 6,5mm Installation dimensions: RC-...H000, RC-...Q0FZ Axial O-ring CONINVERS

Modular signal connectors - CONINVERS signal M - RC series, compatible to UC series Cable clamp type cage with shield adapter The cables are partly fed through to the connector housings using cable glands. These differ according to the application (shielded or unshielded). Cable clamp type cages and shield adapters are required in the case of shielded plug connectors. They can be used to implement a multitude of plug connection combinations for different cable types with a cable diameter from.5 mm to 10.5 mm. The shield adapter depends on the diameter of the core bundle under the braided shield d and is pushed directly under the braided shield when assembling the connector. The shield adapter serves as a connection element between the cable shield and connector housing (inner sleeve and adapter cover). The cable clamp type cage with the seal ensures sealing in the IP67 degree of protection and assumes the cable strain relief function. The specific type for each cable depends on the external cable diameter D of the cable. We recommend that you try out adjacent types for transition points between two screw connection sizes. Ordering Information: A 6-core, shielded cable is to be adapted with the RC-000000080FZ cable plug connector housing. External cable diameter D = 6.0 mm Diameter of core bundle d = 4.7 mm The appropriate cable gland can be found in the category D = 5.5 mm to 6.5 mm and in line d 4.9 mm and is RC-Z48. d Description Diagram of stranded wire bundle diameter d and external cable diameter D Cable clamp type cage and shield adapter External cable diameter: D =.5... 4.5 mm Cable clamp type cage and shield adapter External cable diameter: D = 4.5... 5.5 mm Cable clamp type cage and shield adapter External cable diameter: D = 5.5... 6.5 mm Cable clamp type cage and shield adapter External cable diameter: D = 6.5... 7.5 mm Cable clamp type cage and shield adapter External cable diameter: D = 7.5... 9.5 mm Cable clamp type cage and shield adapter External cable diameter: D = 9.5... 10.5 mm D Stranded wire bundle Ø d [mm] RC-Z... Cable clamp type cage with shield adapter d ~.5 mm RC-Z45 1604491 10 d ~. mm RC-Z46 1604495 10 d ~.5 mm RC-Z5 160468 10 d ~. mm RC-Z47 1604497 10 d ~.6 mm RC-Z48 160701 10 d ~.8 mm RC-Z49 1604500 10 d ~ 4.1 mm RC-Z40 160450 10 d ~ 4. mm RC-Z41 1604505 10 d ~ 4.6 mm RC-Z4 1604506 10 d ~. mm RC-Z4 16070 10 d ~.6 mm RC-Z44 1604509 10 d ~.8 mm RC-Z45 1604511 10 d ~ 4.1 mm RC-Z 160464 10 d ~ 4. mm RC-Z46 160451 10 d ~ 4.6 mm RC-Z47 1604516 10 d ~ 4.9 mm RC-Z48 1604517 10 d ~ 5. mm RC-Z49 1604519 10 d ~ 5.5 mm RC-Z440 160450 10 d ~ 5.8 mm RC-Z441 16045 10 d ~.6 mm RC-Z44 160454 10 d ~.8 mm RC-Z44 160456 10 d ~ 4.1 mm RC-Z7 160470 10 d ~ 4. mm RC-Z40 160447 10 d ~ 4.6 mm RC-Z8 16047 10 d ~ 4.9 mm RC-Z95 1604458 10 d ~ 5. mm RC-Z9 160445 10 d ~ 5.5 mm RC-Z444 160459 10 d ~ 5.8 mm RC-Z445 16045 10 d ~ 6. mm RC-Z96 1604460 10 d ~ 6.6 mm RC-Z446 160454 10 d ~.8 mm RC-Z447 16070 10 d ~ 4.1 mm RC-Z448 160456 10 d ~ 4. mm RC-Z449 160704 10 d ~ 4.6 mm RC-Z9 160475 10 d ~ 4.9 mm RC-Z91 1604449 10 d ~ 5. mm RC-Z98 160446 10 d ~ 5.5 mm RC-Z450 160459 10 d ~ 5.8 mm RC-Z451 1604541 10 d ~ 6. mm RC-Z1 16046 10 d ~ 6.6 mm RC-Z9 1604454 10 d ~ 7.0 mm RC-Z94 1604456 10 d ~ 7.4 mm RC-Z401 1604468 10 d ~ 7.7 mm RC-Z40 1604470 10 d ~ 5.8 mm RC-Z404 1604474 10 d ~ 6. mm RC-Z45 160705 10 d ~ 6.6 mm RC-Z45 1604545 10 d ~ 7.0 mm RC-Z454 1604547 10 d ~ 7.4 mm RC-Z455 1604549 10 d ~ 7.7 mm RC-Z99 1604465 10 4 CONINVERS

Modular signal connectors - CONINVERS signal M - RC series, compatible to UC series Universal cable clamp type cage Universal cable glands are available as alternatives to the shielded cable glands in IP67 for applications with less stringent requirements as regards shield attenuation. Irrespective of the diameter of the cable or braided core screen, shielded or unshielded lines with an outside diameter from mm to 10.5 mm can be assembled for universal use with only one cable gland. This simplifies storage. RC-Z46. Universal cable clamp type cage, with/without shield Description Cable Ø D [mm] Cable clamp type cage, universal, with shield, cable clamp type cage, shield disc and universal seal Cable clamp type cage, universal, cable feed-through without shield, cable clamp type cage and universal seal... 10,5 RC-Z46 1604558 10... 10,5 RC-Z46 1604561 10 D D Universal cable clamp type cagewith shield, D = external cable diameter Universal cable clamp type cage, cable feed-through without shield, D=external cable diameter CONINVERS 5

Modular signal plug connectors - CONINVERS signal Bayonet - TU series Selection guide The product chart shows the possible combinations of cable plug connector housings and coupling connector or appliance plug connector housings. The cable plug connectors and coupling connectors are equipped with a universal shield connection for cable diameters of up to 14.5 mm. The modular system makes it possible to select an custom style connector from a limited number of articles. To describe a connector for the device and panel mounting side, the housing is supplemented with the corresponding contact insert, including the contacts. The product chart provides an overview of the available components. With universal shielding Housing type Cable plug connector housing, page 8 TU-00000008UDU TU-0000000TUDU Coupling connector housing, page 8 With universal shielding TU-00000009UDU Appliance plug connector housing, page 9 Front mounting, page 9 Rear mounting, page 9 Shielded TU-0000000WB00 TU-00000004100 TU-0000000500 6 CONINVERS

Modular signal plug connectors - CONINVERS signal Bayonet - TU series Contact inserts incl. contacts Solder contact inserts, page 6 to 19-pos. The connectors are equipped with a universal shield connection for cable diameters of up to 14.5 mm. Shielded cable glands with a cable clamp type cage and shield adapters are not required. Pin Socket The connectors are equipped with a universal shield connection for cable diameters of up to 14.5 mm. Shielded cable glands with a cable clamp type cage and shield adapters are not required. All housings can be equipped with male or female contacts. All housings can be equipped with male or female contacts. Crimp contact inserts, from page onwards 6 to 19-pos. Housing type Bayonet Pin Screw contact inserts, page 6, 7 and 9-pos. Pin Free solder pin length A [mm] B [mm] Socket Socket Direct PCB connection, from page 6 onwards with 6 to 17-pos. solder-in contacts Pin Socket C [mm] D [mm] TU-...WB00 -- -- 9 16.5 TU-...4100.5.5 9 16.5 TU-...500.5.5 9 16.5 Note: For reasons pertaining to safety, only female contacts may be used in the live part of the connector. CONINVERS 7

Modular signal connectors - CONINVERS signal Bayonet - TU series Cable and coupling plug connector housings, shielded Signal plug connectors of the TU series are equipped with a bayonet locking, which is easy to use but rugged at the same time. Like the signal plug connectors with M screw locking, the TU series is also completely modular in design and uses the same insulation bodies/contacts. The shielding function and the cable clamping are universal. It is not necessary to adapt the shielding elements to the cables used. TU-0000000.UDU Bayonet cable plug connector housing, shielded TU-00000009UDU Bayonet coupling plug connector housing, shielded Description For outer cable Ø [mm] Bayonet cable plug connector housing, straight, with universal shielding, metal.0... 14.5 TU-00000008UDU 1605886 10 Bayonet cable plug connector housing, angled, with universal shielding, metal.0... 14.5 TU-0000000TUDU 1605891 8 Bayonet coupling plug connector housing, straight, with universal shielding, metal.0... 14.5 TU-00000009UDU 1605888 10 Contact inserts Order separately, see page onwards Order separately, see page onwards Ø 9, 4 4 64, 6,5 61 Ø 9, O 5,9 61,5 4 4 4 4 TU-0000000TUDU TU-00000008UDU TU-00000009UDU 8 CONINVERS

Modular signal connectors - CONINVERS signal Bayonet - TU series Appliance plug connector housing, front and rear mounting In the case of front mounting, the panel mounting base is fitted to the device from outside using screws or nuts. On the device side, the contact insert then establishes the connection to the device either by solder or crimp connections. Connector housings for rear mounting are fed through the mounting panel from the inside and screwed tight from the outside. TU-0000000WB00 Appliance plug connector housing, front mounting TU-0000000..00 Appliance plug connector housing, rear mounting Description Wall thickness [mm] Appliance plug connector housing, front mounting straight, axial O-ring, 4-hole mounting (Ø. mm), for shielded applications from 1.5 TU-0000000WB00 160589 0 Appliance plug connector housing, rear mounting straight, flat gasket, 4-hole thread mounting (M), for shielded applications up to.5 TU-00000004100 1605881 0 Appliance plug connector housing, rear mounting straight, radial O-ring, 4-hole mounting (Ø. mm), for shielded applications.7....5 TU-0000000500 1605885 0 Contact inserts Order separately, see page onwards Order separately, see page onwards 5 19,8 1,5, 0 4,5, 1,5 1,8 0 4,5, 1,5 1,8 Ø 4x, 4xM Ø 4x, TU-0000000WB00 Axial O-ring TU-00000004100 Flat gasket TU-0000000500 Radial O-ring 4xØ,/M/ 19,8±0,1 Ø19,6+0,1 Installation dimensions: TU-0000000WB00 max.,5mm Ø8+0,1 Installation dimensions: TU-00000004100 4xØ,/M/ 4,5±0,1 Ø8+0,1,7mm,5mm 1x15 Installation dimensions: TU-0000000500 CONINVERS 9

Modular signal plug connectors - CONINVERS signal Contact inserts - RC, UC and TU series Mechanical and electrical data Mechanical data Housing material: Insulating bodies: Contact material: Contact surface: Contact connection method: Gasket and O ring: Flat gasket: Temperature range: Conductor entry: Locking type: Mechanical insertion/withdrawal cycles: Degree of protection (when locked): Approval: Metal parts: CuZn (copper-zinc alloy) or GD-Zn (zinc die-cast), nickel-plated or yellow passivated Appliance plug connector, angled rotatable: nickel-plated/thick layer passivated, can be painted over Plastic adapter caps/plastic-sheathed metal parts: SPS (syndiotactic polystyrene) Thermoplastic polyester (PBT), polyamide (PA 66), polycarbonate (PC) Storage at 15 C... 5 C, 40... 70% rel. humidity Copper-zinc alloy (CuZn) Nickel-plated (Ni) with a gold layer (Au) Solder cup, crimp and screw versions, solder-in pin Fluorine rubber (FPM) Housing types with plastic adapter cap: perbunane (NBR) gasket Perbunane (NBR with fabric insert), fluorine rubber (FPM) -0 C... +15 C EMC version for external cable diameter... 10.5 mm, without EMC protection for external cable diameter 4... 14 mm EMC version with extended cable entry range (UC / TU series) for external cable diameter... 14.5 mm M screw locking, TU series: bayonet locking, bayonet ring Ø 9. mm Standard: 50, more on request EMC version: IP67 Version without EMC protection: IP65... IP68 (depending on cable gland) An overview of the listed connectors as per UL, cul and VDE will be available on request. Electrical data Number of positions 6, 7 9 (8+1) 9 (6+) 1 16 17 19 (16+) Contacts 6, 7 8 + 1 6 + 1 16 17 16 + Contact Ø [mm] 1 1 1 1 1 1 1,5 Stranded wire cross section Solder connection: contacts x [mm /AWG] max. 6 (7) x.5/14 8 x 1.0/18 + 1 x.5/14 6 x 1.0/18 + x.5/14 1 x.5/14 16 x 1.0/18 17 x 1.0/18 16 x 1.0/18 + x 1.0/18 Crimp connection: contacts x [mm /AWG] max. 6 (7) x.5/14 8 x 0.56/0 + 1 x.5/14 1 x 0.56/0 16 x 0.56/0 17 x 0.56/0 16 x 1.0/18 + x 1.5/16 Screw connection: contacts x [mm /AWG] max. 6 (7) x 1.0/18 8 x 0.75/18 + 1 x 1.0/18 Nominal current per contact at 5 C 1 ) 0 8 0 8 0 8 8 8 8 10 Specifications as per DIN EN 61984:001 Nominal/rated voltage [V] 00 00 150 150 150 150 150 Test/surge voltage [kv AC],5,5 1,5 1,5 1,5 1,5 1,5 Surge voltage category II II II II II II II Pollution degree ) Installation height [m] Up to,000 Up to,000 Up to,000 Up to,000 Up to,000 Up to,000 Up to,000 1) If required, the effective current carrying capacity must be determined according to the application using a derating curve. ) The values specified require a correctly locked pair of connectors that are disconnected only for testing and maintenance. If an unlocked connector is exposed to ambient conditions and if there is a danger of contamination, the connector should be sealed using a IP 54 protective cap. Derating curve based on DIN EN 6051-5- Cable plug connector (1-pos.) RC series shield attenuation curve based on DIN EN 5089-1-6 Shield attenuation curve UC / TU series based on DIN EN 5089-1-6 Current [A] 9 8 7 6 5 4 1 = x0,5mm² = 6x0,5mm² = 9x0,5mm² 1 4 = 1x0,5mm² 0 0 0 40 60 4 80 100 1 10 Attenuation [db] 100 80 60 40 0 0 10 100 1000 Attenuation [db] 100 80 60 40 0 0 10 100 1000 Ambient temperature [ C] Frequency [MHz] Frequency [MHz] Note: Plug connectors may only be inserted or removed when the power supply is disconnected. Note: The modular M connectors of the RC and UC series are completely compatible. After technical clarification, these can also be combined with the M complete plug connectors of the RF series. 0 CONINVERS

Modular signal plug connectors - CONINVERS signal Contact inserts - RC, UC and TU series Connector pin assignments and coding Contact insert numbering (view of plug-in side) Direction of rotation of contact insert numbering (view of plug-in side) N 8 1 7 9 6 PO N 1 8 9 7 SO 6 N 1 8 9 7 SO 6 N 8 1 7 9 6 SO 5 4 4 5 4 5 5 4 Clockwise (standard) Counter-clockwise (standard) Counter-clockwise (opposite) Clockwise (opposite) Number of positions Pin Socket Pin Socket 6-pos. Solder / crimp / screw 7-pos. Solder / crimp / screw 6 N 6 N 5 7 1 1 4 PO 6 N 6 N 5 7 1 1 4 PO 7 5 4 SO 7 5 4 SO N N 9-pos. (6+) Solder 8 1 7 9 6 PO 5 4 1 4 9 SO 8 5 7 6 N N N N 9-pos. (8+1) 8 7 1 9 1 9 8 7 1 8 9 7 8 7 1 9 Solder / crimp / screw 6 PO 5 4 SO 6 4 5 PO 6 4 5 6 SO 5 4 N N N N 1-pos. 7 8 9 1 1 10 1 9 8 10 1 7 1 9 8 10 1 7 7 8 9 1 1 10 Solder / crimp 6 PO 11 5 4 SO 11 4 5 6 PO 11 4 5 6 6 SO 11 5 4 16-pos. Solder N X Y 11 1 1 10 16 1 9 15 PO 14 8 4 7 5 6 N Y 1 X 11 1 1 16 10 9 14 SO 15 4 8 5 7 6 N N 16-pos. Crimp 11 1 1 10 16 1 9 15 PO 14 8 4 7 5 6 1 11 1 1 16 10 9 14 SO 15 4 8 5 7 6 17-pos. Solder N X Y 11 1 1 10 16 1 9 15 17 14 8 4 7 5 6 N Y 1 X 11 1 1 16 10 9 14 4 17 15 8 5 7 6 N Y 1 X 11 1 1 16 10 9 14 4 17 15 8 5 7 6 N X Y 11 1 1 10 16 1 9 15 17 14 8 4 7 5 6 N N 17-pos. Crimp 11 1 1 10 16 1 9 15 17 14 8 4 PO 7 5 6 1 11 1 1 16 10 9 14 4 17 15 8 SO 5 7 6 N N 19-pos. (16+) Solder / crimp 1 11 1 9 10 17 18 1 19 16 PO 8 14 4 15 7 5 6 1 1 18 11 1 17 19 10 16 9 SO 4 14 8 15 5 7 6 Note: Other coding versions can be configured manually or mechanically on request. The RC/UC/TU series connectors can be equipped with male or female contacts depending on the application. For reasons pertaining to safety, only female contacts may be used in the live part of the connector. CONINVERS 1

Modular signal connectors - CONINVERS signal Contact inserts - RC, UC and TU series Contact inserts with solder and screw contacts Contact inserts 6... 19-pos. The contact inserts with the contact carriers and contacts are available for the following connection methods: solder technology, crimp system, Screw connection technology, Solder-in technology for PCBs. RC-...N10000 RC-...NS0000 Contact insert and solder contacts, pin/socket Contact insert and screw contacts, pin/socket Description Contacts / direction of rotation Contact insert, 6-pos., contacts: 6 x Ø.0 mm Contact insert, 7-pos., contacts: 7 x Ø.0 mm Contact insert, 9-pos. (6+), contacts: 6 x Ø 1.0 mm, x Ø.0 mm Contact insert, 9-pos. (8+1), contacts: 8 x Ø 1.0 mm, 1 x Ø.0 mm Contact insert, 1-pos., contacts: 1 x Ø 1.0 mm Contact insert, 16-pos., contacts: 16 x Ø 1.0 mm Contact insert, 17-pos., contacts: 17 x Ø 1.0 mm Contact insert, 19-pos. (16+), contacts: 16 x Ø1.0 mm; x Ø1.5 mm Pin / standard RC-06P1N10000 15907 0 RC-06P1NS0000 159555 5 Socket / standard RC-06S1N10000 159645 60 RC-06S1NS0000 1594164 5 Pin / standard RC-07P1N10000 15946 0 RC-07P1NS0000 1594515 5 Socket / standard RC-07S1N10000 1594558 60 RC-07S1NS0000 1594801 5 Pin / standard RC-6P1N10000 16058 0 Socket / standard RC-6S1N10000 160668 0 Pin / standard RC-09P1N10000 1594887 0 RC-09P1NS0000 15955 5 Socket / standard RC-09S1N10000 1595791 60 RC-09S1NS0000 1596456 5 Pin / opposite RC-09PN10000 1595600 0 Socket / opposite RC-09SN10000 159655 60 Pin / standard RC-1P1N10000 1596856 0 Socket / standard RC-1S1N10000 1598466 60 Pin / opposite RC-1PN10000 1597867 0 Socket / opposite RC-1SN10000 1599614 60 Pin / standard RC-16P1N10000 1600509 60 Socket / standard RC-16S1N10000 1600816 60 Pin / standard RC-17P1N10000 160119 0 Socket / standard RC-17S1N10000 1601799 60 Pin / opposite RC-17PN10000 160177 0 Socket / opposite RC-17SN10000 1608 60 Pin / standard RC-19P1N10000 16048 0 Socket / standard RC-19S1N10000 160749 60 Connection cross section [mm ] For contact Ø 1.0 mm / 1.5 mm 1,0 0,75 for contact Ø.0 mm,5 1,0 Direction of rotation of contact insert numbering (view of plug-in side) Pin clockwise (standard) Pin counter-clockwise (opposite) Note: Take into account the torque for the terminal block screws: max. 0.1 Nm for screw contacts, plug-in Ø 1 mm max. 0. Nm for screw contacts, plug-in Ø mm N N 8 1 1 8 7 9 9 7 6 PO SO 6 5 4 4 5 Socket counter-clockwise (standard) Socket clockwise (opposite) N N 1 8 8 1 9 7 7 9 SO 6 4 5 6 SO 5 4 Housing termination CONINVERS

Contact inserts with crimp contacts Modular signal connectors - CONINVERS signal Contact inserts - RC, UC and TU series Crimp contact inserts with contacts are available for the different numbers of positions and directions of rotation. The crimp contacts cover connection areas of 0.14 mm....5 mm depending on the connector pin assignment. RC-...N8E0000 Contact insert and crimp contacts, rolled, pin/socket RC-...N8.0000 Contact insert and crimp contacts, turned, pin/socket Description Contact insert, 6-pos., contacts: 6 x Ø.0 mm Contact insert, 6-pos., contacts: 6 x Ø.0 mm Contact insert, 7-pos., contacts: 7 x Ø.0 mm Contact insert, 7-pos., contacts: 7 x Ø.0 mm Contact insert, 9-pos. (8+1), contacts: 8 x Ø 1.0 mm, 1 x Ø.0 mm Contact insert, 9-pos. (8+1), contacts: 8 x Ø 1.0 mm, 1 x Ø.0 mm Contact insert, 1-pos., contacts: 1 x Ø 1.0 mm Contact insert, 16-pos., contacts: 16 x Ø 1.0 mm Contact insert, 17-pos., contacts: 17 x Ø 1.0 mm Contact insert, 19-pos. (16++PE), contacts: 16 x Ø1.0 mm; x Ø1.5 mm Contacts / direction of rotation Crimp range C: 1.5 -.5 mm Pin / standard RC-06P1N8B0000 15955 10 Socket / standard RC-06S1N8B0000 1594145 10 Crimp range D: 1.0-1.5 mm Pin / standard RC-06P1N8K0000 160699 10 Socket / standard RC-06S1N8K0000 1606995 10 Crimp range C: 1.5 -.5 mm Pin / standard RC-07P1N8B0000 1594497 10 Socket / standard RC-07S1N8B0000 1594786 10 Crimp range D: 1.0-1.5 mm Pin / standard RC-07P1N8K0000 1606997 10 Socket / standard RC-07S1N8K0000 1606998 10 8 x crimp range B: 0.14-0.56 mm 1 x crimp range C: 1.5 -.5 mm Pin / standard RC-09P1N8C0000 1595501 10 Socket / standard RC-09S1N8C0000 1596417 10 8 x crimp range B: 0.14-0.56 mm 1 x crimp range D: 1.0-1.5 mm Pin / standard RC-09P1N8L0000 1607001 10 Socket / standard RC-09S1N8L0000 1607004 10 Crimp range A: 0. - 0.56 mm Crimp range B: 0.14-0.56 mm Pin / standard RC-1P1N8E0000 1597641 10 RC-1P1N8D0000 159765 10 Pin / opposite RC-1PN8E0000 159895 10 RC-1PN8D0000 15989 10 Socket / standard RC-1S1N8E0000 159948 10 RC-1S1N8D0000 15994 10 Socket / opposite RC-1SN8E0000 16004 10 RC-1SN8D0000 16001 10 Crimp range B: 0.14-0.56 mm Pin / standard RC-16P1N8D0000 1600747 10 Socket / standard RC-16S1N8D0000 1601116 10 Crimp range A: 0. - 0.56 mm Crimp range B: 0.14-0.56 mm Pin / standard RC-17P1N8E0000 160166 10 RC-17P1N8D0000 160164 10 Socket / standard RC-17S1N8E0000 16084 10 RC-17S1N8D0000 1608 10 Crimp range B: 0.14-0.56 mm Pin / standard RC-1RP1NRM0000 160144 10 Socket / standard RC-1RS1NRM0000 16005 10 Crimping tool RC-Z10 see page 140 RC-Z504 see page 140 Notes: Crimp contacts/contact carriers separate, see page 4 The 19-pos.crimp contact inserts RC-1RP1NRM0000 and RC-1RS1NRM0000 cannot be combined with the angled connector housing RC-0000000AD00. 4 For the 19-pos. (16++PE) crimp contact inserts RC-1RP1NRM0000 and RC-1RS1NRM0000, the spacer sleeve RC-E0146 (order no. 160961) must be ordered separately. This spacer sleeve ensures the PE connection with the connector housing. See Accessories, page 141 Housing termination CONINVERS

Modular signal connectors - CONINVERS signal Contact inserts - RC, UC and TU series Crimp contact carriers The contact carriers and the male and female crimp contacts can also be ordered separately for 6 to 9-pos. connectors. Further contact inserts / contacts are available on request. RC-...N8A..., RC-1R.1NRA... Crimp contact carriers, separate, pin/socket Description Contacts / direction of rotation Crimp contact carriers 6-pos., contacts: 6 x Ø.0 mm Pin / standard RC-06P1N8A0000 15941 50 Socket / standard RC-06S1N8A0000 159401 50 Crimp contact carriers 7-pos., contacts: 7 x Ø.0 mm Pin / standard RC-07P1N8A0000 159445 50 Socket / standard RC-07S1N8A0000 159471 50 Crimp contact carriers, 9-pos. (8+1), contacts: 8 x Ø 1.0 mm, 1 x Ø.0 mm Pin / standard RC-09P1N8A0000 159575 50 Socket / standard RC-09S1N8A0000 15960 50 Crimp contact carriers 1-pos., contacts: 1 x Ø 1.0 mm Pin / standard RC-1P1N8A0000 1597464 50 Socket / standard RC-1S1N8A0000 159918 50 Pin / opposite RC-1PN8A0000 1598196 50 Socket / opposite RC-1SN8A0000 1600076 50 Crimp contact carriers 16-pos., contacts: 16 x Ø 1.0 mm Pin / standard RC-16P1N8A0000 1600707 50 Socket / standard RC-16S1N8A0000 1601058 50 Crimp contact carriers 17-pos., contacts: 17 x Ø 1.0 mm Pin / standard RC-17P1N8A0000 1601451 50 Socket / standard RC-17S1N8A0000 16008 50 Crimp contact carriers, 19-pos. (16++PE), contacts: 16 x Ø 1.0 mm, x Ø 1.5 mm, 1 x Ø 1.5 (PE) Pin / standard RC-1RP1NRA0000 160066 50 Socket / standard RC-1RS1NRA0000 1601 50 Direction of rotation of contact insert numbering (view of plug-in side) Pin clockwise (standard) 7 8 N 9 1 Pin counter-clockwise (opposite) 1 N 9 8 7 Note: For the 19-pos. (16++PE) crimp contact carriers RC-1RP1NRA0000 and RC-1RS1NRA0000, the spacer sleeve RC-E0146 (order no. 160961) must be ordered separately. This spacer sleeve ensures the PE connection with the connector housing. See Accessories, page 141 6 PO 5 4 SO 6 4 5 Socket counter-clockwise (standard) Socket clockwise (opposite) N N 1 9 8 7 8 7 9 1 SO 6 4 5 6 SO 5 4 4 CONINVERS

Modular signal connectors - CONINVERS signal Contact inserts - RC, UC and TU series Crimp contacts For replacement purposes - suitable for every crimp contact carrier - male or female crimp contacts can be ordered in the different connection cross-sections. Rolled contacts Turned contacts Crimp contacts, separate, pin/socket Crimp contacts, separate, pin/socket Description Contacts / connection cross section [mm ] Crimp contacts for contact carriers, 6-pos., 6 x Ø.0 mm Pin Ø.0 mm / 1.0... 1,5 / AWG 18-16 RC-5CP000 16051 100 Socket Ø.0 mm / 1.0... 1,5 / AWG 18-16 RC-5CS000 160517 100 Pin Ø.0 mm / 1.5...,5 / AWG 16-14 RC-5AP000 160505 100 Socket Ø.0 mm / 1.5...,5 / AWG 16-14 RC-5AS000 160509 100 Crimp contacts for contact carriers, 7-pos., 7 x Ø.0 mm Pin Ø.0 mm / 1.0... 1,5 / AWG 18-16 RC-5CP000 16051 100 Socket Ø.0 mm / 1.0... 1,5 / AWG 18-16 RC-5CS000 160517 100 Pin Ø.0 mm / 1.5...,5 / AWG 16-14 RC-5AP000 160505 100 Socket Ø.0 mm / 1.5...,5 / AWG 16-14 RC-5AS000 160509 100 Crimp contacts for contact carriers, 9-pos. (8+1), 8 x Ø1.0 mm, 1 x Ø.0 mm Pin Ø1.0 mm / 0.14... 0,56 / AWG 6-0 RC-1P000 159786 500 Socket Ø1.0 mm / 0.14... 0,56 / AWG 6-0 RC-1S000 1599600 500 Pin Ø.0 mm / 1.5...,5 / AWG 16-14 RC-5AP000 160505 100 Socket Ø.0 mm / 1.5...,5 / AWG 16-14 RC-5AS000 160509 100 Pin Ø.0 mm / 1.0... 1,5 / AWG 18-16 RC-5CP000 16051 100 Socket Ø.0 mm / 1.0... 1,5 / AWG 18-16 RC-5CS000 160517 100 Crimp contacts for contact carriers, 1-pos., 1 x Ø1.0 mm Pin Ø1.0 mm / 0.... 0,56 / AWG 4-0 RC-P000 1601 100 Socket Ø1.0 mm / 0.... 0,56 / AWG 4-0 RC-S000 1607 100 Pin Ø1.0 mm / 0.14... 0,56 / AWG 6-0 RC-1P000 159786 500 Socket Ø1.0 mm / 0.14... 0,56 / AWG 6-0 RC-1S000 1599600 500 Crimp contacts for contact carriers, 16-pos., 16 x Ø1.0 mm Pin Ø1.0 mm / 0.14... 0,56 / AWG 6-0 RC-1P000 159786 500 Socket Ø1.0 mm / 0.14... 0,56 / AWG 6-0 RC-1S000 1599600 500 Crimp contacts for contact carriers, 17-pos., 17 x Ø1.0 mm Pin Ø1.0 mm / 0.... 0,56 / AWG 4-0 RC-P000 1601 100 Socket Ø1.0 mm / 0.... 0,56 / AWG 4-0 RC-S000 1607 100 Pin Ø1.0 mm / 0.14... 0,56 / AWG 4-0 RC-1P000 159786 500 Socket Ø1.0 mm / 0.14... 0,56 / AWG 4-0 RC-1S000 1599600 500 Crimp contacts for contact carriers, 19-pos. (16++PE), 16 x Ø1.0 mm, x Ø1.5 mm, 1 x Ø1.5 mm (PE) Pin Ø1.0 mm / 0.5... 0,5 / AWG 4-0 RC-6LP000 160819 100 Socket Ø1.0 mm / 0,5... 0,5 / AWG 4-0 RC-6LS000 1608 100 Pin Ø1.5 mm / 0.75... 1,0 / AWG 18 RC-6EP000 16080 100 Socket Ø1.5 mm / 0.75... 1,0 / AWG 18 RC-6ES000 160805 100 Pin Ø1.5 mm (PE) / 0.75... 1,0 / AWG 18 RC-6FP000 160808 100 Socket Ø1.5 mm (PE) / 0.75... 1,0 / AWG 18 RC-6FS000 160811 100 Crimping tool RC-Z10 see page 140 RC-Z504 see page 140 CONINVERS 5

Modular signal connectors - CONINVERS signal Contact inserts - RC, UC and TU series Contact inserts with 6 to 17-pos. solder-in contacts Contact inserts with solder-in contacts allow efficient mounting on PCBs. Assembly times are reduced and wiring errors are prevented. Ordering Information: The first step is to determine the number of positions and the connection method pin or socket. The free solder pin length A, B, C or D is the distance between the mounting flange of the connector housing and the end of the solder-in contact. In this measurement, the housing wall thickness and air gap to the PCB are included. PCB hole patterns The PCB hole-ø must be adapted to the solder-in pin Ø. Further contact inserts / free solder pin lengths are available on request. Description Solder-in contact insert, 6-pos., contacts: 6 x Ø.0 mm Solder-in contact insert, 9-pos. (6+), contacts: 6 x Ø 1.0 mm, x Ø.0 mm Contact insert, 9-pos. (8+1), contacts: 8 x Ø 1.0 mm, 1 x Ø.0 mm Contact insert, 1-pos., contacts: 1 x Ø 1.0 mm Contact insert, 17-pos., contacts: 17 x Ø 1.0 mm Contacts / direction of rotation Free solder pin length A Solder pin Ø: 1.5 mm Contact insert and solder in contacts, pin/socket Pin / standard RC-06P1N0000 15995 5 Socket / standard RC-06S1N0000 159400 0 Solder pin Ø: 6 x 0.6 mm, x 1.5 mm Pin / standard RC-6P1N0000 16067 5 Socket / standard RC-6S1N0000 160764 0 Solder pin Ø: 8 x 0.6 mm, 1 x 1.5 mm Pin / standard RC-09P1N0000 1606999 5 Socket / standard RC-09S1N0000 159679 0 Solder pin Ø: 0.6 mm Pin / standard RC-1P1N0000 159740 5 Socket / standard RC-1S1N0000 1599079 0 Solder pin Ø: 0.6 mm Pin / standard RC-17P1N0000 1607009 5 Socket / standard RC-17S1N0000 1607011 0 Housing type Free solder pin length M A [mm] B [mm] C [mm] D [mm] RC-...00.5 4.5 10.0 17.5 RC-...WQ00.5 4.5 10.0 17.5 RC-...400.5 4.5 10.0 17.5 RC-...500.5 4.5 10.0 17.5 RC-...H000.5 11.0 RC-...E000.5 11.0 Bayonet A [mm] B [mm] C [mm] D [mm] TU-...WB00 9.0 16.5 TU-...4100.5.5 9.0 16.5 TU-...500.5.5 9.0 16.5 D C B A Mounting flange Appliance plug connector housing 10,15 4,,45 Direction of rotation of contact insert numbering Pin clocwise (standard) (view of plug-in side) Socket counter-clockwise (standard) 4,75 4,75 8, 1,7 4, 10,15 N N 8 7 1 9 1 8 9 7 8,5 4,15 6 PO 5 4 SO 6 4 5 6-pos. 9 (6+)-pos. 6 CONINVERS

Modular signal connectors - CONINVERS signal Contact inserts - RC, UC and TU series Free solder pin length B Free solder pin length C Free solder pin length D Contact insert and solder in contacts, pin/socket Contact insert and solder in contacts, pin/socket Contact insert and solder in contacts, pin/socket Solder pin Ø: 1.5 mm Solder pin Ø: 1.5 mm Solder pin Ø: 1.5 mm RC-06P1N0000 1606991 5 RC-06P1NA0000 15951 5 RC-06P1NC0000 160699 5 RC-06S1N0000 1606994 0 RC-06S1NA0000 1594149 0 RC-06S1NC0000 1606996 0 Solder pin Ø: 6 x 1.0 mm, x 1.5 mm Solder pin Ø: 6 x 1. mm, x 1.5 mm Solder pin Ø: 6 x 1. mm, x 1.5 mm RC-6P1N0000 160640 5 RC-6P1NA0000 160645 5 RC-6P1NC0000 160651 5 RC-6S1N0000 160767 0 RC-6S1NA0000 160774 0 RC-6S1NC0000 160778 0 Solder pin Ø: 8 x 1.0 mm, 1 x 1.5 mm Solder pin Ø: 8 x 1. mm, 1 x 1.5 mm Solder pin Ø: 8 x 1. mm, 1 x 1.5 mm RC-09P1N0000 1607000 5 RC-09P1NA0000 1595507 5 RC-09P1NC0000 1595519 5 RC-09S1N0000 160700 0 RC-09S1NA0000 159641 0 RC-09S1NC0000 159644 0 Solder pin Ø: 1.0 mm Solder pin Ø: 1. mm Solder pin Ø: 1. mm RC-1P1N0000 1607006 5 RC-1P1NA0000 159764 5 RC-1P1NC0000 1597660 5 RC-1S1N0000 1607007 0 RC-1S1NA0000 1607008 0 RC-1S1NC0000 159967 0 Solder pin Ø: 1.0 mm Solder pin Ø: 1. mm Solder pin Ø: 1. mm RC-17P1N0000 1607010 5 RC-17P1NA0000 160168 5 RC-17P1NC0000 1601647 5 RC-17S1N0000 160701 0 RC-17S1NA0000 1607014 0 RC-17S1NC0000 16095 0 7, 11,9 9,05 5,45,4 8,7,6 8,7,6 5,,8, 9,8 11,1,8 1 4, 4,5 5,75 6,95 5,05 0,85,5 4,5 6,5 10,9 1,5 9 (8+1)-pos. 1-pos. 17-pos. CONINVERS 7

8 CONINVERS

Signal plug connectors CONINVERS signal Unlike modular signal plug connectors, the circular connectors of these series are provided fully assembled. Contacts are added only in the case of crimp connection, depending on the desired connection cross section. M16 appliance plug connectors up to 14-pos. The M16 appliance plug connectors of the PV series provide high contact densities in compact spaces, for instance as a central connection for distributor boxes. Pin versions with 8, 10, 1 and 14 positions with solder contacts or with solder-in pins for direct PCB connection are available. M17 connectors for small dimensions optionally with SPEEDCON quick locking The M17 range of the ST series offers a suitable housing version for almost every installation situation. Thanks to compact dimensions, the ST series is ideal for small sizes even in narrow installation spaces. The 17-pos. versions provide clear signal transmission. For power transmission of up to 0 A / 60 V, 4 to 9-pos. versions with PE connection are available; page 86 onwards. M Generous cable clamping range The M signal plug connectors of the RF series are mainly used in areas where control units are connected with an electrical drive. The 1, 16 and 17-pos. basic range in metal housing versions is adapted to these applications. The cable clamping range is allows for a maximum cable diameter (shielded) of 1. mm. M7 High-position versions The 6, 5+PE and 8-pos. signal plug connectors of the M7 HC series are available in male or female versions with solder, solder-in or crimp connections. Crimp contacts are available for stranded wire cross sections from 0.08 mm to 1 mm / AWG 8 to 18. The cable plug connectors and coupling connectors are equipped with a universal cable clamping and a shield connection for external cable diameters from mm to 14.5 mm. Table of contents M16 - PV series Mechanical and electrical data 40 Appliance plug connectors, front and rear mounting 41 M17 - ST series Mechanical and electrical data 4 Selection guide 44 Cable plug connectors 46 Coupling connectors 48 Appliance plug connectors, front and rear mounting 49 Crimp contacts 5 M - RF series Mechanical and electrical data 54 Selection guide 56 Cable plug connectors and coupling connectors 58 Appliance plug connectors, front mounting: 60 Cable plug connectors and coupling connectors, highgrade steel 66 Appliance plug connectors, front mounting, high-grade steel 68 Crimp contacts 70 M7 - HC series Mechanical and electrical data 7 Cable plug connectors, coupling connectors and appliance plug connectors 74 Crimp contacts 80 CONINVERS 9

Signal plug connector - CONINVERS signal M16 - PV series Mechanical and electrical data Mechanical data: Housing material: Housing surface: Insulating bodies: rotating part, copper-zinc alloy (CuZn) nickel-plated polyamide (PA66)Storage at 15 C... 5 C, 40%... 70% rel. humidity Contact material: copper-zinc alloy (CuZn) Contact surface: nickel-plated (Ni) with a gold layer (Au) Contact connection method: solder cup, solder-in pin Gasket and O ring: fluorine rubber (FKM) Ambient temperature: -0 C... 15 C Locking type: M16 screw locking Mechanical insertion/withdrawal cycles: standard: 50, more on request Degree of protection: IP67 when locked Electrical data Number of positions 8 10 1 14 Male contacts 8 10 1 14 Contact Ø [mm] 1 1 1 1 Connection cross section, solder connection max. [mm / AWG] 0.4 / 0.4 / 0.4 / 0.4 / Nominal current per contact at 5 C 1) [A] 6 6 6 6 Specifications as per DIN EN 61984:001 Nominal/operating voltage [V AC / DC] 100 100 100 100 Test/surge voltage [kv] 0.8 0.8 0.8 0.8 Surge voltage category II II II II Pollution degree ) Installation height [m] Up to,000 Up to,000 Up to,000 Up to,000 1) If required, the effective current carrying capacity must be determined according to the application using a derating curve. ) The values specified require a correctly locked pair of connectors that are disconnected only for testing and maintenance. If an unlocked connector is exposed to ambient conditions and if there is a danger of contamination, the connector should be sealed using a IP54 protective cap. Contact insert numbering (view of plug-in side) Number of positions 8 10 1 14 P P R G E P R G E P R G Solder contacts, pin S J S J O S J O C S J Solder-in contacts, pin T T T N T A M U L A M U L A M U L A M U L PCB hole patterns (hole diameter 0.8 ± 0.05 mm) Number of positions 8 10 1 14 P Y Y P R G Y E P R G Y E P R G Solder-in contacts, pin X S J X T X S J X T X O S J X T O C X N S J X T A M U L A M U L A M U L A M U L Y Y Y Y Note: Plug connectors may only be inserted or removed when the power supply is disconnected. X/Y values of the PCB hole patterns A C E G J L M N O P R S T U X -.5-4.5 -.. 4.5.5-0.95 -.4 -.4-0.95 0.95.4.4 0.95 Y -4 0.00 4 4 0.00-4 -.4-0.95 0.95.4.4 0.95-0.95 -.4 40 CONINVERS

Signal plug connector - CONINVERS signal M16 - PV series Appliance plug connectors for front and rear mounting The M16 appliance plug connectors of the PV series allow a high density of positions in a small space, for example as central connection for distributor boxes. 8, 10, 1 and 14-pos. male versions with solder contacts or soldered-in pins are available for direct PCB connection. PV-..P1N16100 PV-..P1N.HG00 M16 appliance plug connector, front mounting M16 appliance plug connector, rear mounting Description Connection method M16 appliance plug connector, 8-pos., pin M16 appliance plug connector, 10-pos., pin M16 appliance plug connector, 1-pos., pin M16 appliance plug connector, 14-pos., pin Solder PV-08P1N16100 159490 40 PV-08P1N1HG00 159491 40 Solder-in PV-08P1NHG00 1609977 40 Solder PV-10P1N16100 15949 40 PV-10P1N1HG00 159494 40 Solder-in PV-10P1NHG00 1609978 40 Solder PV-1P1N16100 159496 40 PV-1P1N1HG00 159497 40 Solder-in PV-1P1NHG00 1609979 40 Solder PV-14P1N16100 159499 40 PV-14P1N1HG00 159500 40 Solder-in PV-14P1NHG00 159501 40 1,5 9,5 1,5 1,5 16,5 7 1,5,5 16,5 7,5 1,5 Ø 0 M16x0,75 M18x0,75 M18x0,75 M16x0,75 Ø 0 M18x0,75 M16x0,75 Ø 0,6 Ø 0 Solder connection: PV-..P1N16100 Solder connection: PV-..P1N1HG00 Solder-in connection: PV-..P1NHG00 17+0,1 Ø18+0,1 min. 1,5mm max. 5,0mm Installation dimensions PV-..P1N16100, PV-..P1N.HG00 CONINVERS 41

Signal plug connectors - CONINVERS signal M17 - ST series Mechanical and electrical data Mechanical data Housing material: Rotating part: copper-zinc alloy (CuZn), die-cast part: zinc (GD-Zn) Housing surface: Nickel-plated; appliance plug connector: nickel-plated/thick layer passivated (can be painted over) Insulating bodies: Polyamide (PA 66) Contact material: Copper-zinc alloy (CuZn) Contact surface: Nickel-plated (Ni) with a gold layer (Au) Contact connection method: Crimp version Gasket and O ring: Fluorine rubber (FKM) Ambient temperature: -0 C... 15 C Conductor entry: cable plug connectors and coupling connectors for external cable diameters of.5... 10 mm, shielded (.5... 11.5 mm on request) Locking type: Quick locking M17 SPEEDCON, cable plug connectors optionally with M17 x 1 control thread Mechanical insertion/withdrawal cycles: Standard: 50, more on request Degree of protection: IP67 when locked Electrical data Number of positions 17 Contacts 17 Contact Ø [mm] 0.6 Stranded wire cross section, crimp contacts turned [mm / AWG] 0.08... 0.5 / 8-0 Stranded wire cross section, C-HC crimp contacts punched-rolled [mm ] Cable clamping range max Ø [mm] 10 Nominal current per contact at 5 C 1) [A].6 Specifications as per DIN EN 61984:001 Nominal/operating voltage [V AC / DC] 60 Test/surge voltage [kv] 1.5 Surge voltage category III Pollution degree ) Installation height [m] Up to,000 1) If required, the effective current carrying capacity must be determined according to the application using a derating curve. ) The values specified require a correctly locked pair of connectors that are disconnected only for testing and maintenance. If an unlocked connector is exposed to ambient conditions and if there is a danger of contamination, the connector should be sealed using a IP 54 protective cap. Shield attenuation curve based on DIN EN 5089-1-6 (cable connectors and appliance connectors angled on the base plate) Attenuation [db] 10 100 80 60 40 0 0 0 100 1000 Frequency [MHz] Note: Plug connectors may only be inserted or removed when the power supply is disconnected. 4 CONINVERS

Signal plug connectors - CONINVERS signal M17 - ST series Connector pin assignments and coding Contact insert numbering (view of plug-in side) Number of positions Pin Socket 17-pos. Crimp Note: The connectors can be equipped with male or female contacts according to the application. For reasons pertaining to safety, only female contacts may be used in the live part of the connector. CONINVERS 4

Signal plug connectors - CONINVERS signal M17 - ST series Selection guide M17 signal plug connectors 17-pos., crimp ranges 0.08 mm to 0.5 mm / AWG 8 to 0 Cable plug connectors Coupling connectors Appliance plug connectors (device flange) The ST series connectors are fully assembled and the respective crimp contacts must be ordered separately. Connector type Cable plug connectors SPEEDCON Quick locking, page 46 Square mounting flange for cable plug connectors and coupling connectors for wall mounting, page 15 Every housing type can be equipped with male or female contacts. The connectors with a knurled nut can be optionally equipped with SPEEDCON quick locking or with M17 x 1 control thread. The connectors with an external thread are fully compatible with standard threads and with SPEEDCON quick locking. The product chart provides an overview of the available components. shielded ST-...1N8A80..S M17 x 1 Standard locking, page 47 ST-...1N8A80.. Coupling connectors shielded page 48 Square mounting flange for cable plug connectors and coupling connectors for wall mounting, page 15 ST-...1N8A90..S Device connectors straight, page 49 straight, with contact carriers for snapping in, page 49 ST-...1N8AWQ00S ST-...1N8AW400S straight, with central fastening thread, front mounting, page 51 straight, with central fastening thread, rear mounting, page 51 shielded ST-...1N8A6100S ST-...1N8AH100S angled rotatable, page 50 ST-...1N8AAD00S, ST-...1N8AAC00S 44 CONINVERS

Signal plug connectors - CONINVERS signal M17 - ST series Crimp contacts Female contacts Turned, page 5 Tools / accessories Crimping tools Crimping pliers for turned crimp contacts, page 145 Crimping pliers with digital display for turned crimp contacts, page 150 All housings can be equipped with male or female crimp contacts Male contacts Turned, page 5 Removal tool for contact carrier For appliance plug connectors with contact carriers snapping in from the device side, page 15 Note: For reasons pertaining to safety, only female contacts may be used in the live part of the connector. CONINVERS 45

Signal plug connector - CONINVERS signal M17 - ST series Cable plug connector with SPEEDCON quick locking, shielded The SPEEDCON thread allows quick locking of cable connector and coupling connector or device flange. They are locked by rotating the knurled nut clockwise until it stops. First, the connector must be connected to the mating connector manually without interference of the insertion forces. The knurled nut has a left stop. This allows "blind" mating of the connector. Cable plug connectors of the ST series are either provided with the standard M17 screw locking or with the SPEEDCON quick locking. ST-17.1N8A800.S Cable plug connector SPEEDCON quick locking Description Cable seal Ø [mm] M17 cable plug connector SPEEDCON, 17-pos., straight, for female contacts M17 cable plug connector SPEEDCON, 17-pos., straight, for male contacts.5... 5 ST-17S1N8A800S 1607640 0 5... 8 ST-17S1N8A800S 160764 0 8... 10 ST-17S1N8A8004S 1607644 0.5... 5 ST-17P1N8A800S 16076 0 5... 8 ST-17P1N8A800S 160765 0 8... 10 ST-17P1N8A8004S 160767 0 Crimp contacts 17-pos.: Ø 0.6 mm Order separately, see page 5 onwards min.5, O 1, ST-17.1N8A800.S 46 CONINVERS

Signal plug connector - CONINVERS signal M17 - ST series Cable plug connector with standard interlocking, shielded The cable plug connector is also provided with a standard screw locking. In this version, it is suitable for a standard screw thread as well as a SPEEDCON external thread of the mating connector, e.g. a straight device flange. A special feature is the availability of the connector as a female version and male version. ST-17.1N8A800. Cable plug connector, standard interlocking Description Cable seal Ø [mm] M17 cable plug connector,17-pos., straight, for female contacts M17 cable plug connector,17-pos., straight, for male contacts.5... 5 ST-17S1N8A800 160769 0 5... 8 ST-17S1N8A800 1607641 0 8... 10 ST-17S1N8A8004 160764 0.5... 5 ST-17P1N8A800 160761 0 5... 8 ST-17P1N8A800 160764 0 8... 10 ST-17P1N8A8004 160766 0 Crimp contacts 17-pos.: Ø 0.6 mm Order separately, see page 5 onwards min.5, Ø 1, ST-17.1N8A800. CONINVERS 47

Signal plug connector - CONINVERS signal M17 - ST series Coupling plug connector, shielded The coupling plug connector is available only with SPEEDCON thread. They can be screwed together with the SPEEDCON thread as well as with the full thread of the mating connector. The plug-in position is marked clearly using an arrow. ST-17.1N8A900.S Coupling plug connector SPEEDCON/standard interlocking Description Cable seal Ø [mm] M17 coupling plug connector,17-pos., straight, for female contacts M17 coupling plug connector,17-pos., straight, for male contacts.5... 5 ST-17S1N8A900S 1607646 0 5... 8 ST-17S1N8A900S 1607647 0 8... 10 ST-17S1N8A9004S 1607649 0.5... 5 ST-17P1N8A900S 160769 0 5... 8 ST-17P1N8A900S 160760 0 8... 10 ST-17P1N8A9004S 160761 0 Crimp contacts 17-pos.: Ø 0.6 mm Order separately, see page 5 onwards min.50,5 M17 SPEEDCON ST-17.1N8A900.S 48 CONINVERS

Signal plug connector - CONINVERS signal M17 - ST series Appliance plug connector, straight, front mounting, shielded Devices are partially supplied with punched on and pre-assembled contact carriers, e.g. encoder for servo motors. It is practical in such cases to install the insulation body into the pre-assembled housing from behind. This version requires a removal tool for removing the contact carrier again from the front. ST-17.1N8AWQ00S ST-17.1N8AW400S Appliance plug connector, straight, SPEEDCON/standard interlocking Appliance plug connector, straight, SPEEDCON/standard interlocking contact insert for snapping in Description No. of pos. M17 appliance plug connector, straight, for female contacts M17 appliance plug connector, straight, for male contacts 17 ST-17S1N8AWQ00S 1607654 0 ST-17S1N8AW400S 160765 0 17 ST-17P1N8AWQ00S 160766 0 ST-17P1N8AW400S 160764 0 Crimp contacts 17-pos.: Ø 0.6 mm Order separately, see page 5 onwards Order separately, see page 5 onwards Removal tool for contact carrier Order separately, see page 15 1 1 1,6 1,6 4xM,5 16,8 0,85 16,8 0,85 17±0,1 16,8 M17 SPEEDCON M17 SPEEDCON 16,8 Installation dimensions Ø 4x,7 ST-17.1N8AWQ00S Ø 4x,7 ST-17.1N8AW400S CONINVERS 49

Signal plug connector - CONINVERS signal M17 - ST series Appliance plug connector, angled, rotatable, front mounting, shielded The angled panel mounting bases are progressively rotatable up to 08 for optimum adjustment to the respective application. In addition, two flange dimension versions with 1.6 mm x 1.6 mm or 5 mm x 5 mm are available. Panel mounting plug connector angled, rotatable, flange dimensions 8 x 8 mm on request. ST-17.1N8AAD00S Appliance plug connector, angled, rotatable, SPEEDCON/standard interlocking, flange dimension: 1.6 mm ST-17.1N8AAC00S Appliance plug connector, angled, rotatable, SPEEDCON/standard interlocking, flange dimension: 5 mm Description No. of pos. M17 appliance plug connector, angled, rotatable, for female contacts M17 appliance plug connector, angled, rotatable, for male contacts 17 ST-17S1N8AAD00S 160765 16 ST-17S1N8AAC00S 1607650 16 17 ST-17P1N8AAD00S 16076 16 ST-17P1N8AAC00S 16076 16 Crimp contacts 17-pos.: Ø 0.6 mm Order separately, see page 5 onwards Order separately, see page 5 onwards,5,5 M17 SPEEDCON 0 105 M17 SPEEDCON 0 105 6, 1, 6, 1, Ø 4x,7 Ø 4x,7 16,8 1,6 19,8 5 ST-17.1N8AAD00S ST-17.1N8AAC00S 4xM,5 Ø17±0,1 4xM,5 min.ø17 max.ø0, 45 45 16,8 Ø,8 19,8 Ø8 Installation dimensions: ST-17.1N8AAD00S Installation dimensions: ST-17.1N8AAC00S 50 CONINVERS

Signal plug connector - CONINVERS signal M17 - ST series Appliance plug connector, central fastening thread, front and rear mounting, shielded The device flanges with central fastening thread are screwed onto the mounting panel from outside or inside. The contact carriers are fastened from the device side by clipping them in and snapping them in place. A removal tool is required for removing the contact carrier again from the front. ST-17.1N8A6100S ST-17.1N8AH100S Appliance plug connector, front mounting, SPEEDCON/standard interlocking, central fastening thread M18 x 0.75 Appliance plug connector, rear mounting, SPEEDCON/standard interlocking, central fastening thread M0 x 1.5 Description No. of pos. M17 appliance plug connector, for female contacts M17 appliance plug connector, for male contacts Locking nut, for mounting bore holes and polarization 17 ST-17S1N8A6100S 16154 0 ST-17S1N8AH100S 16154 0 17 ST-17P1N8A6100S 161540 0 ST-17P1N8AH100S 161541 0 M18 x 0.75 ST-E015151 16181 5 M0 x 1.5 RC-1041 1600417 5 Crimp contacts 17-pos.: Ø 0.6 mm Order separately, see page 5 onwards Order separately, see page 5 onwards Removal tool for contact carrier Order separately, see page 15 Order separately, see page 15 0,6 11,4 Ø18,+0,1 min. 0,8 M18x0,75 min. 1,5 max.5 M17 SPEEDCON M18x0,75 Ø 1, 17,1+0,1 8 ST-17S1N8A6100S, ST-17P1N8A6100S, Separate ordering for locking nut Installation dimensions: ST-17.1N8A6100S, bore hole with polarization and locking nut (recommended for installation in steel sheet panel) Installation dimensions: ST-17.1N8A6100S, feed-through hole with thread (recommended for installation in steel sheet panel) 5, max.8 6,7 Ø0,+0,1 min. 0,8 M0x1,5 min. M0x1,5 M17 SPEEDCON Ø 6 18,1+0,1 11,4 ST-17S1N8AH100S, ST-17P1N8AH100S, Separate ordering for locking nut Installation dimensions: ST-17.1N8AH100S, bore hole with polarization and locking nut (recommended for installation in steel sheet panel) Installation dimensions: ST-17.1N8AH100S, feed-through hole with thread (recommended for installation in steel sheet panel) CONINVERS 51

Signal plug connector - CONINVERS signal M17 - ST series Crimp contacts, turned The 17 pos. signal plug connectors of the ST series are designed for Ø 0.6 mm contacts. Note: Depending on the wire used, the connection cross-sections (crimp ranges) can differ from the values mentioned below. ST-06KS010 ST-06KP010 Crimp contacts socket Crimp contacts pin Description Connection cross section [mm / AWG] Contacts, female Ø 0.6 mm, for M17 connectors 0,08... 0,5 / 8-4 ST-06KS010 1607580 100 0,14... 0,4 / 6- ST-06KS00 1607581 100 0,4... 0,5 / -0 ST-06KS00 160758 100 Contacts, male Ø 0.6 mm, for M17 connectors 0,08... 0,5 / 8-4 ST-06KP010 1607577 100 0,14... 0,4 / 6- ST-06KP00 1607578 100 0,4... 0,5 / -0 ST-06KP00 1607579 100 Crimping tools Order separately, see page 145 onwards Order separately, see page 145 onwards Crimping tool with digital display Order separately, see page 150 Order separately, see page 150 Notes: Every connector housing type can be equipped with male or female contacts. For reasons pertaining to safety, only female contacts may be used in the live part of the connector. 5 CONINVERS

Signal plug connector - CONINVERS signal M17 - ST series CONINVERS 5

Signal plug connectors - CONINVERS signal M - RF series Mechanical and electrical data Mechanical data Housing material: Rotating part: copper-zinc alloy (CuZn), die-cast part: zinc (GD-Zn) Housing surface: Nickel-plated; appliance plug connector: nickel-plated/thick layer passivated (can be painted over) High-grade steel versions: Housing material, high-grade steel 1.405 Insulating bodies: Polyamide (PA 66) Contact material: Copper-zinc alloy (CuZn) Contact surface: Nickel-plated (Ni) with a gold layer (Au) Contact connection method: Crimp version Gasket and O ring: Fluorine rubber (FKM) Ambient temperature: -0 C... 15 C Conductor entry: Cable plug connectors and coupling connectors for external cable diameters of... 1. mm, shielded Locking type: M screw locking Mechanical insertion/withdrawal cycles: Standard: 50, punched-rolled C-HC crimp contacts: up to 10,000 Degree of protection: IP67 when locked Electrical data Number of positions 1 16 17 Contacts 1 16 17 Contact Ø [mm] 1 1 1 Stranded wire cross section, crimp contacts turned [mm / AWG] 0.08... 1.0 / 8-18 0.08... 1.0 / 8-18 0.08... 1.0 / 8-18 Stranded wire cross section, C-HC crimp contacts punched-rolled [mm / AWG] 0.08... 0.56 / 8-0 0.08... 0.56 / 8-0 0.08... 0.56 / 8-0 Cable clamping range max Ø [mm] 1. 1. 1. Nominal current per contact at 5 C 1) [A] 8 8 8 Specifications as per DIN EN 61984:001 Nominal/operating voltage [V AC / DC] 150 100 100 Test/surge voltage [kv].5 1.5 1.5 Surge voltage category III III III Pollution degree ) Installation height [m] Up to,000 Up to,000 Up to,000 1) If required, the effective current carrying capacity must be determined according to the application using a derating curve. ) The values specified require a correctly locked pair of connectors that are disconnected only for testing and maintenance. If an unlocked connector is exposed to ambient conditions and if there is a danger of contamination, the connector should be sealed using a IP 54 protective cap. Shield attenuation curve based on DIN EN 5089-1-6 (cable connectors and appliance connectors angled on the base plate) Attenuation [db] 10 100 80 60 40 0 0 0 100 1000 Frequency [MHz] Note: Plug connectors may only be inserted or removed when the power supply is disconnected. 54 CONINVERS

Signal plug connectors - CONINVERS signal M - RF series Connector pin assignments and coding Contact insert numbering (view of plug-in side) Direction of rotation of contact insert numbering (view of plug-in side) S N 8 9 1 7 6 1 10 11 5 4 N S 1 9 8 10 1 11 7 6 4 5 N S 1 9 8 10 1 11 7 6 4 5 S N 8 9 1 7 6 1 10 11 5 4 Clockwise (standard) marked R Counter-clockwise (standard) marked L Counter-clockwise (opposite) marked L Clockwise (opposite) marked R Number of positions Pin Socket Pin Socket 1-pos. N coding Crimp 8 9 1 7 1 10 6 11 R 5 4 9 8 1 10 1 7 L 11 6 4 5 9 8 1 10 1 7 L 11 6 4 5 8 9 1 7 1 10 6 11 R 5 4 1-pos. S/N coding Crimp 8 9 1 7 1 10 6 11 R 5 4 9 8 1 10 1 7 L 11 6 4 5 9 8 1 10 1 7 L 11 6 4 5 8 9 1 7 1 10 6 11 R 5 4 16-pos. N coding Crimp 1 11 1 10 16 1 9 15 14 4 8 R 5 7 6 1 1 11 1 16 10 4 14 15 9 L 5 6 7 8 1 1 11 1 16 10 4 14 15 9 L 5 6 7 8 1 11 1 10 16 1 9 15 14 4 8 R 5 7 6 17-pos. N coding Crimp 11 1 1 10 16 1 17 9 15 14 4 8 R 5 7 6 1 1 11 1 16 10 17 4 14 15 9 L 5 8 6 7 1 1 11 1 16 10 17 4 14 15 9 L 5 8 6 7 11 1 1 10 16 1 17 9 15 14 4 8 R 5 7 6 17-pos. S/N coding Crimp (on request) 11 1 1 10 16 1 17 9 15 14 4 8 R 5 7 6 1 1 11 1 16 10 17 4 14 15 9 L 5 8 6 7 1 1 11 1 16 10 17 4 14 15 9 L 5 8 6 7 11 1 1 10 16 1 17 9 15 14 4 8 R 5 7 6 Note: More coding versions and position numbers can be configured on request. The connectors can be equipped with male or female contacts according to the application. For reasons pertaining to safety, only female contacts may be used in the live part of the connector. CONINVERS 55

Signal plug connectors - CONINVERS signal M - RF series Selection guide M signal plug connectors 1 / 16 / 17-pos., N/S coding, up to 8 A / 150 V, crimp ranges of up to 1 mm / AWG 18 Cable plug connectors Coupling connectors Appliance plug connectors (device flange) The RF series connectors are fully assembled and the respective crimp contacts must be ordered separately. shielded Connector type Cable plug connectors page 58 RF-...8A80.. 1) Square mounting flange for cable plug connectors and coupling connectors for wall mounting, page 15 Every housing type can be equipped with male or female contacts. The connectors are available with clockwise or counter-clockwise contact insert numbering. N (0 ) and S (0 ) coding positions are possible. The product chart provides an overview of the available components. shielded Coupling connectors page 59 RF-...8A90.. 1) Square mounting flange for cable plug connectors and coupling connectors for wall mounting, page 15 1) Cable plug connectors, coupling connectors and straight appliance plug connectors are also available in high-grade steel versions, from page 66 onwards. Appliance plug connectors straight, 4-hole mounting Ø.7, page 60 straight, 4-hole mounting Ø., page 60 RF-...8AWQ00 1) RF-...8AWA00 1) Contact carriers for snapping in from the device side, straight, 4-hole mounting Ø.7, page 61 Ø., page 61 shielded RF-...8AW400 angled, rotatable page 64 RF-...8AWB00 angled, rotatable, larger flange dimensions, page 64 RF-...8AAD00 RF-...8AAC00 angled, fixed page 6 angled, fixed larger flange dimensions, page 6 angled, fixed, -part housing for higher loads, page 6 RF-...8AAF00 RF-...8AAK00 RF-...8AA00 56 CONINVERS

Signal plug connectors - CONINVERS signal M - RF series Crimp contacts Female contacts Turned, page 71 Tools / accessories Crimping tools Crimping pliers for punched-rolled C-HC crimp contacts, page 144 Punched-rolled, taped, page 70 Crimping pliers for turned crimp contacts, from page 146 onwards All housings can be equipped with male or female crimp contacts Crimping pliers with digital display for turned crimp contacts, page 150 Male contacts Turned, page 71 Removal tool for contact carrier For appliance plug connectors with contact carriers snapping in from the device side, page 15 Note: For reasons pertaining to safety, only female contacts may be used in the live part of the connector. CONINVERS 57

Signal plug connector - CONINVERS signal M - RF series Cable plug connector, shielded The RF series is designed to offer a robust and pluggable M connection between control units and electric drives. The connector targets these applications with its 1, 16 and 17 position offering. RF-1.S..8A80.. RF-1.P..8A80.. M cable plug connector, socket M cable plug connector, pin Description For cable Ø [mm] M cable plug connector,1-pos., N coding, standard M cable plug connector,16-pos., N coding, standard M cable plug connector,17-pos., N coding, standard M cable plug connector,1-pos., S/N coding, standard M cable plug connector,1-pos., N coding, opposite M cable plug connector,16-pos., N coding, opposite M cable plug connector,17-pos., N coding, opposite M cable plug connector,1-pos., S/N coding, opposite (Universal seal)... 1, RF-1S1N8A80DU 160776 0 RF-1P1N8A80DU 16078 0 6... 10 RF-1S1N8A800 16077 0 RF-1P1N8A800 16075 0 9... 1, RF-1S1N8A800 160775 0 RF-1P1N8A800 16077 0 (Universal seal)... 1, RF-16S1N8A80DU 16177 0 RF-16P1N8A80DU 161717 0 6... 10 RF-16S1N8A800 16175 0 RF-16P1N8A800 161715 0 9... 1, RF-16S1N8A800 16176 0 RF-16P1N8A800 161716 0 (Universal seal)... 1, RF-17S1N8A80DU 160740 0 RF-17P1N8A80DU 1607 0 6... 10 RF-17S1N8A800 16078 0 RF-17P1N8A800 16070 0 9... 1, RF-17S1N8A800 16079 0 RF-17P1N8A800 16071 0 (Universal seal)... 1, RF-1S1S8A80DU 160786 0 RF-1P1S8A80DU 160740 0 6... 10 RF-1S1S8A800 160784 0 RF-1P1S8A800 16077 0 9... 1, RF-1S1S8A800 160785 0 RF-1P1S8A800 16078 0 (Universal seal)... 1, RF-1SN8A80DU 160797 0 RF-1PN8A80DU 16075 0 6... 10 RF-1SN8A800 160795 0 RF-1PN8A800 160749 0 9... 1, RF-1SN8A800 160796 0 RF-1PN8A800 160751 0 (Universal seal)... 1, RF-16SN8A80DU 1617 0 RF-16PN8A80DU 1617 0 6... 10 RF-16SN8A800 16170 0 RF-16PN8A800 16170 0 9... 1, RF-16SN8A800 16171 0 RF-16PN8A800 16171 0 (Universal seal)... 1, RF-17SN8A80DU 160749 0 RF-17PN8A80DU 16071 0 6... 10 RF-17SN8A800 160747 0 RF-17PN8A800 16079 0 9... 1, RF-17SN8A800 160748 0 RF-17PN8A800 16070 0 (Universal seal)... 1, RF-1SS8A80DU 160710 0 RF-1PS8A80DU 160764 0 6... 10 RF-1SS8A800 160708 0 RF-1PS8A800 160761 0 9... 1, RF-1SS8A800 160709 0 RF-1PS8A800 16076 0 Crimp contacts Ø 1.0 mm Order separately, see page 70 onwards Order separately, see page 70 onwards 59,1 Clamping ranges Universal seals Cable Ø[mm] State of delivery... 5 Section 1 9... 1, Section 6... 10 Section 5... 7 Ø 6,1 RF-1.S..8A80.., RF-1.P..8A80.. 58 CONINVERS

Signal plug connector - CONINVERS signal M - RF series Coupling plug connector, shielded The cable clamping range for cables and coupling plug connectors is generously dimensioned with a maximum cable diameter (shielded) of 1. mm. Shield and cable clamping have been consistently developed for simple and quick cable assembly. The shield must only be spliced slightly and can be processed quickly without cutting off. RF-1.S..8A90.. M coupling plug connector, socket RF-1.P..8A90.. M coupling plug connector, pin Description For cable Ø [mm] M coupling plug connector,1-pos., N coding, standard (Universal seal)... 1, RF-1S1N8A90DU 160778 0 RF-1P1N8A90DU 16071 0 6... 10 RF-1S1N8A900 160785 0 RF-1P1N8A900 16079 0 9... 1, RF-1S1N8A900 160777 0 RF-1P1N8A900 16070 0 M coupling plug connector,16-pos., N coding, standard (Universal seal)... 1, RF-16S1N8A90DU 16178 0 RF-16P1N8A90DU 161759 0 6... 10 RF-16S1N8A900 161781 0 RF-16P1N8A900 161757 0 9... 1, RF-16S1N8A900 16178 0 RF-16P1N8A900 161758 0 M coupling plug connector,17-pos., N coding, standard (Universal seal)... 1, RF-17S1N8A90DU 16074 0 RF-17P1N8A90DU 16076 0 6... 10 RF-17S1N8A900 160741 0 RF-17P1N8A900 16074 0 9... 1, RF-17S1N8A900 16074 0 RF-17P1N8A900 16075 0 M coupling plug connector,1-pos., S/N coding, standard (Universal seal)... 1, RF-1S1S8A90DU 160789 0 RF-1P1S8A90DU 16074 0 6... 10 RF-1S1S8A900 160787 0 RF-1P1S8A900 160741 0 9... 1, RF-1S1S8A900 160788 0 RF-1P1S8A900 16074 0 M coupling plug connector,1-pos., N coding, opposite (Universal seal)... 1, RF-1SN8A90DU 16070 0 RF-1PN8A90DU 160755 0 6... 10 RF-1SN8A900 160700 0 RF-1PN8A900 16075 0 9... 1, RF-1SN8A900 160701 0 RF-1PN8A900 160754 0 M coupling plug connector,16-pos., N coding, opposite (Universal seal)... 1, RF-16SN8A90DU 161794 0 RF-16PN8A90DU 161771 0 6... 10 RF-16SN8A900 16179 0 RF-16PN8A900 161769 0 9... 1, RF-16SN8A900 16179 0 RF-16PN8A900 161770 0 M coupling plug connector,17-pos., N coding, opposite (Universal seal)... 1, RF-17SN8A90DU 16075 0 RF-17PN8A90DU 16074 0 6... 10 RF-17SN8A900 160750 0 RF-17PN8A900 1607 0 9... 1, RF-17SN8A900 160751 0 RF-17PN8A900 1607 0 M coupling plug connector,1-pos., S/N coding, opposite (Universal seal)... 1, RF-1SS8A90DU 160714 0 RF-1PS8A90DU 160767 0 6... 10 RF-1SS8A900 16071 0 RF-1PS8A900 160765 0 9... 1, RF-1SS8A900 16071 0 RF-1PS8A900 160766 0 Crimp contacts Ø 1.0 mm Order separately, see page 70 onwards Order separately, see page 70 onwards 59, Clamping ranges Universal seals Cable Ø[mm] State of delivery... 5 Section 1 9... 1, Section 6... 10 Section 5... 7 Mx1 RF-1.S..8A90.., RF-1.P..8A90.. CONINVERS 59

Signal plug connector - CONINVERS signal M - RF series Appliance plug connector, front mounting, shielded Appliance plug connectors of the RF series are available in straight and angled versions. In the straight versions, the contact carrier fits through the boreholing of the housing. Reverse fastening in the housing is ensured by a half-open plastic screen. The contact carrier can be opened easily without any tool. Flange versions for M.5 and M screws are available for mounting. RF-1.S..8AW.00 M appliance plug connector, straight, socket RF-1.P..8AW.00 M appliance plug connector, straight, pin Description No. of positions / direction of rotation M appliance plug connector, straight, N coding, 4-hole mountingø. mm 1-pos., standard RF-1S1N8AWA00 16078 40 RF-1P1N8AWA00 16076 40 16-pos., standard RF-16S1N8AWA00 161789 40 RF-16P1N8AWA00 161766 40 17-pos., standard RF-17S1N8AWA00 160789 40 RF-17P1N8AWA00 1607860 40 1-pos., opposite RF-1SN8AWA00 160707 40 RF-1PN8AWA00 160760 40 16-pos., opposite RF-16SN8AWA00 161801 40 RF-16PN8AWA00 161778 40 17-pos., opposite RF-17SN8AWA00 1607901 40 RF-17PN8AWA00 160788 40 M appliance plug connector, straight, S/N coding, 4-hole mountingø. mm 1-pos., standard RF-1S1S8AWA00 160794 40 RF-1P1S8AWA00 160748 40 1-pos., opposite RF-1SS8AWA00 160719 40 RF-1PS8AWA00 16077 40 M appliance plug connector, straight, N coding, 4-hole mountingø.7 mm 1-pos., standard RF-1S1N8AWQ00 160781 40 RF-1P1N8AWQ00 1607806 40 16-pos., standard RF-16S1N8AWQ00 161791 40 RF-16P1N8AWQ00 161768 40 17-pos., standard RF-17S1N8AWQ00 1607894 40 RF-17P1N8AWQ00 1607866 40 1-pos., opposite RF-1SN8AWQ00 1607845 40 RF-1PN8AWQ00 1607818 40 16-pos., opposite RF-16SN8AWQ00 16180 40 RF-16PN8AWQ00 161780 40 17-pos., opposite RF-17SN8AWQ00 160790 40 RF-17PN8AWQ00 1607885 40 M appliance plug connector, straight, S/N coding, 4-hole mountingø.7 mm 1-pos., standard RF-1S1S8AWQ00 160789 40 RF-1P1S8AWQ00 1607811 40 1-pos., opposite RF-1SS8AWQ00 1607850 40 RF-1PS8AWQ00 16078 40 Crimp contacts Ø 1.0 mm Order separately, see page 70 onwards Order separately, see page 70 onwards 5,7 19,8 7,7 16,5 1,1 Mx1 Ø 4x,7 Ø 4x, RF-...N8AWA00, RF-...N8AWB00 19,8±0,1 4xM,5/M Ø0+0,1 Installation dimensions 60 CONINVERS

Appliance plug connector with contact carrier for snapping-in, front mounting, shielded One possible installation variant of the straight device flange is by snapping the contact carrier into the reverse device-side. The contact carrier is removed again with a removal tool (RF-Z0001) from the front, i.e. from the plug-in side. The contacts are removed without any tools. This mounting case is particularly advantageous, if wires are already connected to the contact carrier or are soldered onto the PCB. RF-1.S..8AW.00 With contact carriers for snapping in, 4-hole mounting, socket Signal plug connector - CONINVERS signal M - RF series RF-1.P..8AW.00 With contact carriers for snapping in, 4-hole mounting, pin Description M appliance plug connector, straight, contact carrier for snapping in, Ncoding, 4-hole mounting Ø. mm No. of positions / direction of rotation 1-pos., standard RF-1S1N8AWB00 160780 40 RF-1P1N8AWB00 1607804 40 16-pos., standard RF-16S1N8AWB00 161790 40 RF-16P1N8AWB00 161767 40 17-pos., standard RF-17S1N8AWB00 160789 40 RF-17P1N8AWB00 160786 40 M appliance plug connector, straight, contact carrier for snapping in, S/Ncoding, 4-hole mounting Ø. mm M appliance plug connector, straight, contact carrier for snapping in, Ncoding, 4-hole mounting Ø.7 mm M appliance plug connector, straight, contact carrier for snapping in, S/Ncoding, 4-hole mounting Ø.7 mm 1-pos., opposite RF-1SN8AWB00 1607844 40 RF-1PN8AWB00 1607817 40 16-pos., opposite RF-16SN8AWB00 16180 40 RF-16PN8AWB00 161779 40 17-pos., opposite RF-17SN8AWB00 160790 40 RF-17PN8AWB00 160788 40 1-pos., standard RF-1S1S8AWB00 160787 40 RF-1P1S8AWB00 1607810 40 1-pos., opposite RF-1SS8AWB00 1607849 40 RF-1PS8AWB00 16078 40 1-pos., standard RF-1S1N8AW400 160788 40 RF-1P1N8AW400 160780 40 16-pos., standard RF-16S1N8AW400 161788 40 RF-16P1N8AW400 161765 40 17-pos., standard RF-17S1N8AW400 1607891 40 RF-17P1N8AW400 1607857 40 1-pos., opposite RF-1SN8AW400 160784 40 RF-1PN8AW400 1607816 40 16-pos., opposite RF-16SN8AW400 161800 40 RF-16PN8AW400 161777 40 17-pos., opposite RF-17SN8AW400 1607900 40 RF-17PN8AW400 1607881 40 1-pos., standard RF-1S1S8AW400 160786 40 RF-1P1S8AW400 1607809 40 1-pos., opposite RF-1SS8AW400 1607848 40 RF-1PS8AW400 160781 40 Crimp contacts Ø 1.0 mm Order separately, see page 70 onwards Order separately, see page 70 onwards Removal tool for contact carrier Order separately, see page 15 Order separately, see page 15 5,7 19,8 7,7 16,5 1,1 Mx1 Ø 4x,7 Ø 4x, RF-1.S..8AW.00, RF-1.P..8AW.00 19,8±0,1 4xM,5/M Ø0+0,1 Installation dimensions CONINVERS 61

Signal plug connector - CONINVERS signal M - RF series Appliance plug connector angled, fixed, for high loads, front mounting, shielded Some applications require shock-resistant housing versions. Robust versions of the angled device connector are available to meet these requirements. The housing has a two-piece design, consisting of a solid, fixed angular part and the straight standard flange. RF-1.S..8AA00 RF-1.P..8AA00 M appliance plug connector, angled, fixed, socket M appliance plug connector, angled, fixed, pin Description No. of positions / direction of rotation M appliance plug connector, angled, fixed, -part. Housing for higher loads, N coding 1-pos., standard RF-1S1N8AA00 160779 16 RF-1P1N8AA00 1607 16 16-pos., standard RF-16S1N8AA00 161784 16 RF-16P1N8AA00 161760 16 17-pos., standard RF-17S1N8AA00 160744 16 RF-17P1N8AA00 16077 16 1-pos., opposite RF-1SN8AA00 16070 16 RF-1PN8AA00 160756 16 16-pos., opposite RF-16SN8AA00 161795 16 RF-16PN8AA00 16177 16 17-pos., opposite RF-17SN8AA00 16075 16 RF-17PN8AA00 16076 16 M appliance plug connector, angled, fixed, -part. Housing for higher loads,s/n coding 1-pos., standard RF-1S1S8AA00 160790 16 RF-1P1S8AA00 160744 16 1-pos., opposite RF-1SS8AA00 160715 16 RF-1PS8AA00 160768 16 Crimp contacts Ø 1.0 mm Order separately, see page 70 onwards Order separately, see page 70 onwards Mx1 5,4 4, Ø4x, 4,65 19,8 6 RF-1.S..8AA00, RF-1.P..8AA00 19,8±0,1 4xM Ø0+0,1 Installation dimensions 6 CONINVERS

Signal plug connector - CONINVERS signal M - RF series Appliance plug connector angled, fixed, front mounting, shielded RF-1.S..8AA.00 RF-1.P..8AA.00 M appliance plug connector, angled, fixed, socket M appliance plug connector, angled, fixed, pin Description No. of positions / direction of rotation M appliance plug connector, angled, fixed, N coding, flange dimensions 6 mm x 6 mm 1-pos., standard RF-1S1N8AAF00 160781 16 RF-1P1N8AAF00 16074 16 16-pos., standard RF-16S1N8AAF00 161786 16 RF-16P1N8AAF00 16176 16 17-pos., standard RF-17S1N8AAF00 1607889 16 RF-17P1N8AAF00 160785 16 1-pos., opposite RF-1SN8AAF00 160705 16 RF-1PN8AAF00 160758 16 16-pos., opposite RF-16SN8AAF00 161798 16 RF-16PN8AAF00 161775 16 17-pos., opposite RF-17SN8AAF00 1607898 16 RF-17PN8AAF00 1607875 16 M appliance plug connector, angled, fixed, S/N coding, flange dimensions 6 mm x 6 mm 1-pos., standard RF-1S1S8AAF00 16079 16 RF-1P1S8AAF00 160746 16 1-pos., opposite RF-1SS8AAF00 160717 16 RF-1PS8AAF00 160770 16 M appliance plug connector, angled, fixed, N coding, flange dimensions 8 mm x 8 mm 1-pos., standard RF-1S1N8AAK00 16078 16 RF-1P1N8AAK00 16075 16 16-pos., standard RF-16S1N8AAK00 161787 16 RF-16P1N8AAK00 161764 16 17-pos., standard RF-17S1N8AAK00 1607890 16 RF-17P1N8AAK00 1607854 16 1-pos., opposite RF-1SN8AAK00 160706 16 RF-1PN8AAK00 160759 16 16-pos., opposite RF-16SN8AAK00 161799 16 RF-16PN8AAK00 161776 16 17-pos., opposite RF-17SN8AAK00 1607899 16 RF-17PN8AAK00 1607878 16 M appliance plug connector, angled, fixed, S/N coding, flange dimensions 8 mm x 8 mm 1-pos., standard RF-1S1S8AAK00 16079 16 RF-1P1S8AAK00 160747 16 1-pos., opposite RF-1SS8AAK00 160718 16 RF-1PS8AAK00 160771 16 Crimp contacts Ø 1.0 mm Order separately, see page 70 onwards Order separately, see page 70 onwards Mx1 Mx1 4,65 4,5 7 1,85 7 1,85 5,4 19,8 Ø 4x, 5,4,6 Ø 4x, 6 8 RF-1.S..8AAF00, RF-1.P..8AAF00 RF-1.S..8AAK00, RF-1.P..8AAK00 19,8±0,1,6±0,1 4xM 4xM Ø0+0,1 Installation dimensions: RF-1.S..8AAF00, RF-1.P..8AAF00 Ø0+0,1 Installation dimensions: RF-1.S..8AAK00, RF-1.P..8AAK00 CONINVERS 6

Signal plug connector - CONINVERS signal M - RF series Appliance plug connector angled, rotatable, front mounting, shielded The angled, rotatable versions cover a progressive swiveling range of up to 10. The metallic twisting mechanism provides an EMC-effective, uninterruptible connection of the angled flange with the device housing. RF-1.S..8AA.00 RF-1.P..8AA.00 M appliance plug connector, angled rotatable, socket M appliance plug connector, angled, rotatable, pin Description No. of positions / direction of rotation M appliance plug connector, angled, rotatable, N coding, flange dimensions 6 mm x 6 mm 1-pos., standard RF-1S1N8AAD00 160780 16 RF-1P1N8AAD00 1607 16 16-pos., standard RF-16S1N8AAD00 16180 16 RF-16P1N8AAD00 16176 16 17-pos., standard RF-17S1N8AAD00 160745 16 RF-17P1N8AAD00 16078 16 1-pos., opposite RF-1SN8AAD00 160704 16 RF-1PN8AAD00 160757 16 16-pos., opposite RF-16SN8AAD00 161797 16 RF-16PN8AAD00 161774 16 17-pos., opposite RF-17SN8AAD00 160754 16 RF-17PN8AAD00 16077 16 M appliance plug connector, angled, rotatable, S/N coding, flange dimensions 6 mm x 6 mm 1-pos., standard RF-1S1S8AAD00 160791 16 RF-1P1S8AAD00 160745 16 1-pos., opposite RF-1SS8AAD00 160716 16 RF-1PS8AAD00 160769 16 M appliance plug connector, angled, rotatable, N coding, flange dimensions 8 mm x 8 mm 1-pos., standard RF-1S1N8AAC00 160787 16 RF-1P1N8AAC00 160780 16 16-pos., standard RF-16S1N8AAC00 161785 16 RF-16P1N8AAC00 161761 16 17-pos., standard RF-17S1N8AAC00 1607887 16 RF-17P1N8AAC00 160785 16 1-pos., opposite RF-1SN8AAC00 160784 16 RF-1PN8AAC00 1607814 16 16-pos., opposite RF-16SN8AAC00 161796 16 RF-16PN8AAC00 16177 16 17-pos., opposite RF-17SN8AAC00 1607896 16 RF-17PN8AAC00 160787 16 M appliance plug connector, angled, rotatable, S/N coding, flange dimensions 8 mm x 8 mm 1-pos., standard RF-1S1S8AAC00 160784 16 RF-1P1S8AAC00 1607808 16 1-pos., opposite RF-1SS8AAC00 1607847 16 RF-1PS8AAC00 160780 16 Crimp contacts Ø 1.0 mm Order separately, see page 70 onwards Order separately, see page 70 onwards 5,4 5,4 Mx1 Mx1 1 98 1 98 4,65 4,65 1,85 1,85 7 7 4x, Ø 4x, Ø 19,8 6,6 8 RF-1.S..8AAD00, RF-1.P..8AAD00 RF-1.S..8AAC00, RF-1.P..8AAC00 19,8±0,1,6±0,1 4xM 4xM Edge abrasion max. 0. Ø0+0,1 Installation dimensions: RF-1.S..8AAD00, RF-1.P..8AAD00 Edge abrasion max. 0. Ø0+0,1 Installation dimensions: RF-1.S..8AAC00, RF-1.P..8AAC00 64 CONINVERS

Signal plug connector - CONINVERS signal M - RF series CONINVERS 65

Signal plug connector - CONINVERS signal M - RF series Cable plug connector, stainless steel housing, shielded For special applications, e.g. increased corrosion resistance requirements, the RF series cable and coupling plug connectors as well as straight appliance plug connectors (1,405) are also available with stainless steel housings. The housing is designed with a smooth surface to prevent build-up of contaminants. RF-..S..8A8V.. M cable plug connector, high-grade steel, Socket RF-..P..8A8V.. M cable plug connector, high-grade steel, pin Description Cable seal Ø [mm] M high-grade steel cable plug connector,1-pos., N coding, standard universal 5.5... 1, RF-1S1N8A8VDU 1614078 0 RF-1P1N8A8VDU 1614067 0 6... 10,0 RF-1S1N8A8V0 1614077 0 RF-1P1N8A8V0 16159 0 9... 1, RF-1S1N8A8V0 161540 0 RF-1P1N8A8V0 1614066 0 M high-grade steel cable plug connector,16-pos., N coding, standard universal 5.5... 1, RF-16S1N8A8VDU 1614094 0 RF-16P1N8A8VDU 1614089 0 6... 10,0 RF-16S1N8A8V0 161409 0 RF-16P1N8A8V0 1614087 0 9... 1, RF-16S1N8A8V0 161409 0 RF-16P1N8A8V0 1614088 0 M high-grade steel cable plug connector,17-pos., N coding, standard universal 5.5... 1, RF-17S1N8A8VDU 1614105 0 RF-17P1N8A8VDU 1614100 0 6... 10,0 RF-17S1N8A8V0 161410 0 RF-17P1N8A8V0 1614098 0 9... 1, RF-17S1N8A8V0 1614104 0 RF-17P1N8A8V0 1614099 0 M high-grade steel cable plug connector,1-pos., S/N encoding, standard universal 5.5... 1, RF-1S1S8A8VDU 1614081 0 RF-1P1S8A8VDU 1614070 0 6... 10,0 RF-1S1S8A8V0 1614079 0 RF-1P1S8A8V0 1614068 0 9... 1, RF-1S1S8A8V0 1614080 0 RF-1P1S8A8V0 1614069 0 M high-grade steel cable plug connector,1-pos., N coding, opposite universal 5.5... 1, RF-1SN8A8VDU 1615068 0 RF-1PN8A8VDU 161407 0 6... 10,0 RF-1SN8A8V0 161408 0 RF-1PN8A8V0 1614071 0 9... 1, RF-1SN8A8V0 161408 0 RF-1PN8A8V0 161407 0 M high-grade steel cable plug connector,16-pos., N coding, opposite universal 5.5... 1, RF-16SN8A8VDU 1614097 0 RF-16PN8A8VDU 1614091 0 6... 10,0 RF-16SN8A8V0 1614095 0 RF-16PN8A8V0 161545 0 9... 1, RF-16SN8A8V0 1614096 0 RF-16PN8A8V0 1614090 0 M high-grade steel cable plug connector,17-pos., N coding, opposite universal 5.5... 1, RF-17SN8A8VDU 1614108 0 RF-17PN8A8VDU 161410 0 6... 10,0 RF-17SN8A8V0 1614106 0 RF-17PN8A8V0 1614101 0 9... 1, RF-17SN8A8V0 1614107 0 RF-17PN8A8V0 161541 0 M high-grade steel cable plug connector,1-pos., S/N encoding, opposite universal 5.5... 1, RF-1SS8A8VDU 1614086 0 RF-1PS8A8VDU 1614076 0 6... 10,0 RF-1SS8A8V0 1614084 0 RF-1PS8A8V0 1614074 0 9... 1, RF-1SS8A8V0 1614085 0 RF-1PS8A8V0 1614075 0 Crimp contacts Ø 1.0 mm Order separately, see page 70 onwards Order separately, see page 70 onwards 59,1 Clamping ranges Universal seals Cable Ø[mm] State of delivery... 5 Section 1 9... 1, Section 6... 10 Section 5... 7 6,1 Ø RF-..S..8A8V.., RF-..P..8A8V.. 66 CONINVERS

Signal plug connector - CONINVERS signal M - RF series Coupling plug connector, stainless steel housing, shielded RF-..S..8A9V.. RF-..P..8A9V.. M coupling plug connector, high-grade steel, socket M coupling plug connector, high-grade steel, pin Description Cable seal Ø [mm] M high-grade steel coupling plug connector,1-pos., N coding, standard universal 5.5... 1, RF-1S1N8A9VDU 16197 0 RF-1P1N8A9VDU 161960 0 6... 10,0 RF-1S1N8A9V0 161970 0 RF-1P1N8A9V0 161958 0 9... 1, RF-1S1N8A9V0 161971 0 RF-1P1N8A9V0 161959 0 M high-grade steel coupling plug connector,16-pos., N coding, standard universal 5.5... 1, RF-16S1N8A9VDU 161990 0 RF-16P1N8A9VDU 161984 0 6... 10,0 RF-16S1N8A9V0 161988 0 RF-16P1N8A9V0 16198 0 9... 1, RF-16S1N8A9V0 161989 0 RF-16P1N8A9V0 16198 0 M high-grade steel coupling plug connector,17-pos., N coding, standard universal 5.5... 1, RF-17S1N8A9VDU 161400 0 RF-17P1N8A9VDU 161996 0 6... 10,0 RF-17S1N8A9V0 1614000 0 RF-17P1N8A9V0 161994 0 9... 1, RF-17S1N8A9V0 1614001 0 RF-17P1N8A9V0 161995 0 M high-grade steel coupling plug connector,1-pos., S/N encoding, standard universal 5.5... 1, RF-1S1S8A9VDU 161975 0 RF-1P1S8A9VDU 16196 0 6... 10,0 RF-1S1S8A9V0 16197 0 RF-1P1S8A9V0 161961 0 9... 1, RF-1S1S8A9V0 161974 0 RF-1P1S8A9V0 16196 0 M high-grade steel coupling plug connector,1-pos., N coding, opposite universal 5.5... 1, RF-1SN8A9VDU 161978 0 RF-1PN8A9VDU 161966 0 6... 10,0 RF-1SN8A9V0 161976 0 RF-1PN8A9V0 161964 0 9... 1, RF-1SN8A9V0 161977 0 RF-1PN8A9V0 161965 0 M high-grade steel coupling plug connector,16-pos., N coding, opposite universal 5.5... 1, RF-16SN8A9VDU 16199 0 RF-16PN8A9VDU 161987 0 6... 10,0 RF-16SN8A9V0 161991 0 RF-16PN8A9V0 161985 0 9... 1, RF-16SN8A9V0 16199 0 RF-16PN8A9V0 161986 0 M high-grade steel coupling plug connector,17-pos., N coding, opposite universal 5.5... 1, RF-17SN8A9VDU 1614005 0 RF-17PN8A9VDU 161999 0 6... 10,0 RF-17SN8A9V0 161400 0 RF-17PN8A9V0 161997 0 9... 1, RF-17SN8A9V0 1614004 0 RF-17PN8A9V0 161998 0 M high-grade steel coupling plug connector,1-pos., S/N encoding, opposite universal 5.5... 1, RF-1SS8A9VDU 161981 0 RF-1PS8A9VDU 161969 0 6... 10,0 RF-1SS8A9V0 161979 0 RF-1PS8A9V0 161967 0 9... 1, RF-1SS8A9V0 161980 0 RF-1PS8A9V0 161968 0 Crimp contacts Ø 1.0 mm Order separately, see page 70 onwards Order separately, see page 70 onwards 59, Clamping ranges Universal seals Cable Ø[mm] State of delivery... 5 Section 1 9... 1, Section 6... 10 Section 5... 7 Mx1 RF-..S..8A9V.., RF-..P..8A9V.. CONINVERS 67

Signal plug connector - CONINVERS signal M - RF series Appliance plug connector, stainless steel housing, front mounting, shielded The appliance plug connectors with stainless steel housing are available in straight version. In these versions, the contact carrier fits through the boreholing of the housing. Reverse fastening in the housing is ensured by a half-open plastic screen. The contact carrier can be opened easily without any tool. Flange versions for M.5 and M screws are available for mounting. RF-..S..8AW.00 High-grade steel appliance plug connector, straight, 4-hole fastening, socket RF-..P..8AW.00 High-grade steel appliance plug connector, straight, 4-hole mounting, pin Description No. of positions / direction of rotation M high-grade steel appliance plug connector, straight, N coding, 4-hole mounting Ø. mm 1-pos., standard RF-1S1N8AWV00 161708 40 RF-1P1N8AWV00 161701 40 16-pos., standard RF-16S1N8AWV00 16179 40 RF-16P1N8AWV00 161719 40 17-pos., standard RF-17S1N8AWV00 161740 40 RF-17P1N8AWV00 16176 40 1-pos., opposite RF-1SN8AWV00 16171 40 RF-1PN8AWV00 1614414 40 16-pos., opposite RF-16SN8AWV00 16174 40 RF-16PN8AWV00 16174 40 17-pos., opposite RF-17SN8AWV00 16174 40 RF-17PN8AWV00 16178 40 M high-grade steel appliance plug connector, straight, S/N encoding, 4-hole fastening Ø. mm 1-pos., standard RF-1S1S8AWV00 161710 40 RF-1P1S8AWV00 16170 40 1-pos., opposite RF-1SS8AWV00 161714 40 RF-1PS8AWV00 161706 40 M high-grade steel appliance plug connector, straight, N encoding, 4-hole fastening Ø.7 mm 1-pos., standard RF-1S1N8AWU00 161707 40 RF-1P1N8AWU00 161700 40 16-pos., standard RF-16S1N8AWU00 16178 40 RF-16P1N8AWU00 161718 40 17-pos., standard RF-17S1N8AWU00 16179 40 RF-17P1N8AWU00 16175 40 1-pos., opposite RF-1SN8AWU00 161711 40 RF-1PN8AWU00 161704 40 16-pos., opposite RF-16SN8AWU00 1617 40 RF-16PN8AWU00 1617 40 17-pos., opposite RF-17SN8AWU00 161741 40 RF-17PN8AWU00 16177 40 M high-grade steel appliance plug connector, straight, S/N encoding, 4-hole fastening Ø.7 mm 1-pos., standard RF-1S1S8AWU00 161709 40 RF-1P1S8AWU00 16170 40 1-pos., opposite RF-1SS8AWU00 16171 40 RF-1PS8AWU00 161705 40 Crimp contacts Ø 1.0 mm Order separately, see page 70 onwards Order separately, see page 70 onwards 5,6 19,8 7,7 16,5 1,1 Mx1 Ø 4x,75 Ø 4x,5 RF-..S..8AW.00, RF-..P..8AW.00 19,8±0,1 4xM,5/M Ø0+0,1 Installation dimensions 68 CONINVERS

Signal plug connector - CONINVERS signal M - RF series CONINVERS 69

Signal plug connector - CONINVERS signal M - RF series Crimp contacts, punched-rolled C-HC are punched-rolled female contacts with hyperboloid-shaped contact ridges and integrated wire and insulation crimp. The high-performance crimp contacts are designed for up to 10,000 insertion/withdrawal cycles. The contacts are available taped on rolls for manual or automatic processing. Note: Depending on the wire used, the connection cross-sections (crimp ranges) can differ from the values mentioned below. SF-10KS.0 C-HC female contacts for processing with manual crimping machines SF-10KS.0 C-HC female contacts for processing with crimping machines Description Connection cross section [mm / AWG] C-HC female contacts, punched-rolled, Taped, Ø 1 mm, 500 pieces/ roll C-HC female contacts, punched-rolled, Taped, Ø 1 mm, 10,000 pieces/ roll 0,08... 0, / AWG 8-4 SF-10KS0 160701 1 0,... 0,56 / AWG 4-0 SF-10KS50 16070 1 0,08... 0, / AWG 8-4 SF-10KS0 160758 1 0,... 0,56 / AWG 4-0 SF-10KS60 160761 1 Crimping tools for punched-rolled C-HC crimp contacts Order separately, see page 144 onwards Order separately, see page 144 onwards 14,5 Ø1,5 6,05 1,7 Notes: Every connector housing type can be equipped with male or female contacts. For reasons pertaining to safety, only female contacts may be used in the live part of the connector. Ø1 A C-HC female contact Ø 1 mm A = D-SUB dimension,8 70 CONINVERS

Signal plug connector - CONINVERS signal M - RF series Crimp contacts, turned The RF series connectors are designed for 1, 16 or 17 signal contacts Ø 1 mm of the SF series depending on the number of positions. These contacts are also used as signal contacts in the P0 power connectors. In this way, handling and storage processes are simplified to a great extent. Note: Depending on the wire used, the connection cross-sections (crimp ranges) can differ from the values mentioned below. SF-...00. Crimp contacts socket SF-...00. Crimp contacts pin Description Connection cross section [mm / AWG] Contact socket Ø 1.0 mm Contact pin Ø 1.0 mm 0,08... 0, / AWG 8-4 SF-6CS000 160556 100 0,14... 0,5 / AWG 6-0 SF-10KS004 160756 100 0,5... 1,0 / AWG 0-18 SF-6AS000 1605557 100 Wire spring contact, 0.14... 1,0 SF-10KS010 1605481 100 0,08... 0, / AWG 8-4 SF-6CP000 1605559 100 0,14... 0,5 / AWG 6-0 SF-10KP004 160755 100 0,5... 1,0 / AWG 0-18 SF-6AP000 1605554 100 Crimping tools Order separately, see from page 146 onwards Order separately, see from page 146 onwards Crimping tool with digital display Order separately, see page 150 Order separately, see page 150 Notes: Every connector housing type can be equipped with male or female contacts. For reasons pertaining to safety, only female contacts may be used in the live part of the connector. CONINVERS 71

Signal plug connectors - CONINVERS signal M7 - HC series Mechanical and electrical data Mechanical data Housing material: Housing surface: Insulating bodies: Contact material: Contact surface: Contact connection method: Gasket and O ring: Flat gasket: Rotating part: copper-zinc alloy (CuZn), die-cast part: zinc (GD-Zn) Nickel-plated Polyamide (PA66) Storage at 15... 5 C, 40... 70% rel. humidity Copper-zinc alloy (CuZn) Nickel-plated (Ni) with a gold layer (Au) Solder cup, crimp version, solder-in pin Fluorine rubber (FPM) Ambient temperature: -0 C... 15 C Conductor entry: Locking type: Mechanical insertion/withdrawal cycles: Degree of protection: perbunane (NBR with fabric insert) fluorine rubber (FPM) EMC version for external cable diameter... 14.5 mm M7 screw locking Standard: 50, more on request IP67 when locked Electrical data Number of positions 6 6 (5+PE) 8 Contacts 6 5+PE 8 Contact Ø [mm] 1 1 1 Connection cross section: Solder connection max. Crimp connection [mm / AWG] [mm / AWG] 1.0 / AWG 18 0.08... 1.0 / AWG 8-18 0.08... 1.0 / AWG 8-18 1.0 / AWG 18 Nominal current per contact at 5 C 1) [A] 8 8 8 Specifications as per DIN EN 61984:001 Nominal/operating voltage [V AC / DC] 150 150 150 Test/surge voltage [kv] 1.5 1.5 1.5 Surge voltage category II II II Pollution degree ) Installation height [m] Up to,000 Up to,000 Up to,000 1) If required, the effective current carrying capacity must be determined using a derating curve according to the application. ) The values specified require a correctly locked pair of connectors that are disconnected only for testing and maintenance. If an unlocked connector is exposed to ambient conditions and if there is a danger of contamination, the connector should be sealed using a IP 54 protective cap. Derating curve based on DIN EN 6051-5- Cable plug connector (6-pos.) Shield attenuation curve based on DIN EN 5089-1-6 Current [A] 8 6 4 1 = 6 x 0,5mm² = 1 x 0,5mm² = 0 x 0,5mm² 4 = 6 x 0,5mm² 0 0 0 40 4 60 80 1 100 10 140 Attenuation [db] 100 80 60 40 0 0 10 100 1000 Ambient temperature [ C] Frequency [MHz] Note: Plug connectors may only be inserted or removed when the power supply is disconnected. 7 CONINVERS

Signal plug connectors - CONINVERS signal M7 - HC series Connector pin assignments and coding Contact insert numbering (view of plug-in side) Clockwise (standard) Counter-clockwise (standard) Number of positions Pin Socket 6-pos. Solder / crimp Solder-in (only pin) N 1 114 15 16 4 17 1 5 18 4 11 PO 19 5 10 6 1 0 9 6 8 7 N 1 15 14 16 17 4 4 18 5 1 5 19 SO 1 6 11 6 0 1 7 8 9 10 6-pos. (5+PE) Crimp N 1 114 15 16 4 17 1 5 18 4 11 PO 19 5 10 6 1 0 9 6 8 7 N 1 15 14 16 17 4 4 18 5 1 5 19 SO 1 6 11 6 0 1 7 8 9 10 8-pos. Solder Solder-in (only pin) N 1 114 15 16 4 17 1 5 18 4 11 PO 8 7 19 5 10 6 1 0 9 6 8 7 N 1 15 14 16 17 4 4 18 5 7 1 SO 8 5 19 1 6 11 6 0 1 7 8 9 10 Note: The connectors can be equipped with male or female contacts according to the application. For reasons pertaining to safety, only female contacts may be used in the live part of the connector. PCB hole pattern 6/8-pos. for PCB mounting (solder-in contacts) Centerline deviation ± 0.1 mm (Solder-in pin Ø, see product description, page 77). +Y 15 1 14 16 1 4 17 5 18 1 8 7 4 +X 19 11 6 5 1 0 10 6 9 7 8 Pos. ( X / Y ) Pos. ( X / Y ) Pos. ( X / Y ) Pos. 10 = ( 5.67 / 5.0 ) Pos. 0 = ( +1.8 / 4.17 ) Pos. 1 = ( +1.95 / +7.47 ) Pos. 11 = ( 7.8 /.5 ) Pos. 1 = ( 1.8 / 4.17 ) Pos. = ( +4.80 / +6.05 ) Pos. 1 = ( 7.70 / +0.60 ) Pos. = ( 4.0 /.1 ) Pos. = ( +6.8 / +.65 ) Pos. 1 = ( 6.8 / +.65 ) Pos. = ( 4.55 / +0.97 ) Pos. 4 = ( +7.70 / +0.60 ) Pos. 14 = ( 4.80 / +6.05 ) Pos. 4 = (.8 / +.60 ) Pos. 5 = ( +7.8 /.5 ) Pos. 15 = ( 1.95 / +7.47 ) Pos. 5 = ( +0.00 / +1.88 ) Pos. 6 = ( +5.67 / 5.0 ) Pos. 16 = ( +0.00 / +5.0 ) Pos. 6 = ( +0.00 / 1.60 ) Pos. 7 = ( +.08 / 7.08 ) Pos. 17 = ( +.8 / +.60 ) Pos. 7 = ( +.0 / +0.14 ) Pos. 8 = ( +0.00 / 7.7 ) Pos. 18 = ( +4.55 / +0.97 ) Pos. 8 = (.0 / +0.14 ) Pos. 9 = (.08 / 7.08 ) Pos. 19 = ( +4.0 /.1 ) CONINVERS 7

Signal plug connector - CONINVERS signal M7 - HC series Cable plug connector, shielded The 6 and 8 pos. signal plug connectors of the HC series are available in male or female versions with the connection methods solder, solder-in or crimp. Crimp contacts are available for wire crosssections of 0.08 mm to 1 mm /AWG 8 to 18. The cable plug connectors are equipped with a universal cable clamping and shield connection for external cable diameters from mm to 14.5 mm. HC-..S1N..80DU M7 cable plug connector, shielded, for female contacts HC-..P1N..80DU M7 cable plug connector, shielded, for male contacts Description Connection method M7 cable plug connector, straight, shielded, 6-pos. Solder HC-6S1N180DU 159054 10 HC-6P1N180DU 159085 10 Crimp HC-6S1NRA80DU 159087 10 HC-6P1NRA80DU 159019 10 M7 cable plug connector, straight, shielded, 6-pos. (5+PE) M7 cable plug connector, straight, shielded, 8-pos. Crimp HC-ARS1NRA80DU 1608 10 HC-ARP1NRA80DU 160819 10 Solder HC-8S1N180DU 15904 10 HC-8P1N180DU 159041 10 For crimp connection: Crimp contacts Ø 1.0 mm Order separately, see page 80 Order separately, see page 80 58,8 Note: For higher cable strain relief requirements, the HC cable plug connectors and coupling connectors are available on request with Pg/metric connecting threads and double bracket strain relief. Ø 0 4 4 HC-..S1N..80DU, HC-..P1N..80DU 74 CONINVERS

Signal plug connector - CONINVERS signal M7 - HC series Coupling plug connector, shielded The 6 and 8 pos. signal plug connectors of the HC series are available in male or female versions with the connection methods solder, solder-in or crimp. Crimp contacts are available for wire crosssections of 0.08 mm to 1 mm / AWG 8 to 18. The coupling plug connectors are equipped with a universal cable clamping and shield connection for external cable diameters from mm to 14.5 mm. HC-..S1N..90DU M7 coupling plug connector, shielded, for female contacts HC-..P1N..90DU M7 coupling plug connector, shielded, for male contacts Description Connection method M7 coupling plug connector, straight, shielded, 6-pos. Solder HC-6S1N190DU 159057 10 HC-6P1N190DU 159089 10 Crimp HC-6S1NRA90DU 159088 10 HC-6P1NRA90DU 15901 10 M7 coupling plug connector, straight, shielded, 6-pos. (5+PE) Crimp HC-ARS1NRA90DU 16150 10 HC-ARP1NRA90DU 16154 10 M7 coupling plug connector, straight, shielded, 8-pos. Solder HC-8S1N190DU 159044 10 HC-8P1N190DU 1590415 10 For crimp connection: Crimp contacts Ø 1.0 mm Order separately, see page 80 Order separately, see page 80 61,4 Note: For higher cable strain relief requirements, the HC cable plug connectors and coupling connectors are available on request with Pg/metric connecting threads and double bracket strain relief. M7x1 4 4 HC-..S1N..90DU, HC-..P1N..90DU CONINVERS 75

Signal plug connector - CONINVERS signal M7 - HC series Appliance plug connector, front mounting, central fastening In the case of front mounting, the connector housing is fitted to the device from "outside" using the Pg1 screw-in thread. HC-..S1N1.600 HC-..P1N1.600 M7 appliance plug connector, front mounting, central fastening Pg1, for female contacts M7 appliance plug connector, front mounting, central fastening Pg1, for male contacts Description Connection method M7 appliance plug connector, 6-pos. M7 appliance plug connector, 6-pos. (5+PE) M7 appliance plug connector, 8-pos. Locking nut PG1, order separately Solder HC-6S1N1600 159049 4 HC-6P1N1600 15908 4 Crimp HC-6S1NRA600 15908 4 HC-6P1NRA600 159016 4 Crimp HC-ARS1NRA600 161519 4 HC-ARP1NRA600 1614648 4 Solder HC-8S1N1600 159048 4 HC-8P1N1600 1590409 4 HC-Z00 1590498 5 HC-Z00 1590498 5 For crimp connection: Crimp contacts Ø 1.0 mm Order separately, see page 80 Order separately, see page 80 0, 6 Ø 5 M7x1 Pg 1 Pg 1 HC-Z 00 HC-..S1N1.600 Axial O-ring Installation dimensions 76 CONINVERS

Appliance plug connector, front mounting, flat gasket Signal plug connector - CONINVERS signal M7 - HC series The HC versions provide solder-in contacts for an effective PCB connection. The free solder pin length is the distance between the mounting flange of the device connector and end of the soldered-in pin. In this measurement, the housing wall thickness and distance to the PCB are included. HC-..S1N..00 M7 appliance plug connector, front mounting, flat gasket, for female contacts HC-..P1N..00 M7 appliance plug connector, front mounting, flat gasket, for male contacts Description Connection method M7 appliance plug connector, 6-pos. Solder HC-6S1N100 159045 4 HC-6P1N100 159076 4 Crimp HC-6S1NRA00 159081 4 HC-6P1NRA00 15901 4 Solder-in, pin Ø 0.6 mm, free solder pin length A:.5 mm HC-6P1N00 161508 1 Solder in, pin Ø 1.0 mm, free solder pin length B:4.5 mm HC-6P1N00 161509 1 Solder-in, pin Ø 0.8 mm, free solder pin length C: 10 mm HC-6P1NT00 15908 1 M7 appliance plug connector, 6-pos. (5+PE) Crimp HC-ARS1NRA00 1590467 4 HC-ARP1NRA00 1590454 4 M7 appliance plug connector, 8-pos. Solder HC-8S1N100 159047 4 HC-8P1N100 1590407 4 Solder-in, pin Ø 0.6 mm, free solder pin length A:.5 mm HC-8P1N00 16151 1 Solder in, pin Ø 1.0 mm, free solder pin length B:4.5 mm HC-8P1N00 161514 1 Solder-in, pin Ø 0.8 mm, free solder pin length C: 10 mm HC-8P1NT00 161516 1 For crimp connection: Crimp contacts Ø 1.0 mm Order separately, see page 80 Order separately, see page 80 Free solder pin length M7 - HC series A B C [mm] [mm] [mm] HC-...00.5 4.5 10 C B A Mounting flange Appliance plug connector housing 1, 1 0 M7x1, Ø 4xØ,/M/ ±0,1 Ø4+0,1 HC-...1N..00 Flat gasket Installation dimensions CONINVERS 77

Signal plug connector - CONINVERS signal M7 - HC series Appliance plug connector, front mounting, O-ring In the case of front mounting, the connector housing is fitted to the device from "outside" using screws, nuts or screwin threads. HC-..S1N..WA00 M7 appliance plug connector, front mounting, radial O-ring, for female contacts HC-..P1N..WA00 M7 appliance plug connector, front mounting, radial O-ring, for male contacts Description Connection method M7 appliance plug connector, 6-pos. Solder HC-6S1N1WA00 15907 4 HC-6P1N1WA00 15900 4 Crimp HC-6S1NRAWA00 159040 4 HC-6P1NRAWA00 1590 4 Solder-in, pin Ø 0.8 mm, free solder pin length C: 10 mm HC-6P1NTWA00 161510 1 M7 appliance plug connector, 6-pos. (5+PE) Crimp HC-ARS1NRAWA00 16151 4 HC-ARP1NRAWA00 1590458 4 M7 appliance plug connector, 8-pos. Solder HC-8S1N1WA00 159049 4 HC-8P1N1WA00 1590418 4 Solder-in, pin Ø 0.8 mm, free solder pin length C: 10 mm HC-8P1NTWA00 161517 1 For crimp connection: Crimp contacts Ø 1.0 mm Order separately, see page 80 Order separately, see page 80 Free solder pin length M7 - HC series A B C [mm] [mm] [mm] HC-...WA00 10 C B A Mounting flange Appliance plug connector housing,,5 0 M7x1, Ø4+0,1 1x15 Ø min. mm HC-...1N..WA00 Radial O-ring Installation dimensions 78 CONINVERS

Appliance plug connector, rear mounting, O-ring Signal plug connector - CONINVERS signal M7 - HC series Housings for rear mounting are fed through the mounting panel from the inside and screwed tight from the outside. HC-..S1N..400 M7 appliance plug connector, rear mounting, radial O-ring, for female contacts HC-..P1N..400 M7 appliance plug connector, rear mounting, radial O-ring, for male contacts Description Connection method M7 appliance plug connector, 6-pos. Solder HC-6S1N1400 159047 4 HC-6P1N1400 159080 4 Crimp HC-6S1NRA400 15908 4 HC-6P1NRA400 159014 4 Solder-in, pin Ø 0.6 mm, free solder pin length A:.5 mm HC-6P1N400 159007 1 Solder in, pin Ø 1.0 mm, free solder pin length B:4.5 mm HC-6P1N400 159011 1 Solder-in, pin Ø 0.8 mm, free solder pin length C: 10 mm HC-6P1NT400 161540 1 M7 appliance plug connector, 6-pos. (5+PE) Crimp HC-ARS1NRA400 161518 4 HC-ARP1NRA400 161541 4 M7 appliance plug connector, 8-pos. Solder HC-8S1N1400 160719 4 HC-8P1N1400 1590408 4 Solder-in, pin Ø 0.6 mm, free solder pin length A:.5 mm HC-8P1N400 16151 1 Solder in, pin Ø 1.0 mm, free solder pin length B:4.5 mm HC-8P1N400 161515 1 Solder-in, pin Ø 0.8 mm, free solder pin length C: 10 mm HC-8P1NT400 15904 1 For crimp connection: Crimp contacts Ø 1.0 mm Order separately, see page 80 Order separately, see page 80 Free solder pin length M7 - HC series A B C [mm] [mm] [mm] HC-...400.5 4.5 10 C B Mounting flange Appliance plug connector housing, 0, 0 A M7x1 M 4xØ,/M/ ±0,1 Ø7+0,1,7mm 4,5mm 1x15 HC-...1N..400 Radial O-ring Installation dimensions CONINVERS 79

Signal plug connector - CONINVERS signal M7 - HC series Crimp contacts, turned Every housing type of the M7 signal plug connector of the HC series can be equipped with male or female contacts. For reasons of safety, only female contacts may be used in the live part of the plug. Note: Depending on the wire used, the connection cross-sections (crimp ranges) can differ from the values mentioned below. RC-...000 Crimp contacts, socket for M7 connectors of HC series RC-6.P000 Crimp contacts, pin for M7 connectors of HC series Description Connection cross section [mm / AWG] Contacts Ø1.0 mm for HC contact carriers, 6-pos. and 6-pos. (5+PE) 0,08... 0, / AWG 8-4 RC-6RS000 160846 100 RC-6RP000 16086 100 0,5... 0,5 / AWG 4-0 RC-6LS000 1608 100 RC-6LP000 160819 100 0,5... 0,75 / AWG 0-18 RC-6KS000 160816 100 RC-6KP000 160814 100 0,75... 1,0 / AWG 18 RC-67S000 160800 500 RC-67P000 160797 500 Contact PE Ø1.0 mm, for HC contact carrier, 6-pos. (5+PE) 0,75... 1,0 / AWG 18 RC-6MS000 16089 100 RC-6MP000 16086 100 Crimping pliers Order separately, see page 140 Order separately, see page 140 Positioning and contact removal tool Order separately, see page 140 Order separately, see page 140 80 CONINVERS

Signal plug connector - CONINVERS signal M7 - HC series CONINVERS 81

8 CONINVERS

Power connectors CONINVERS power Flexible machine and system cabling also requires device flanges and panel feedthroughs in different versions in addition to cable plug connectors and coupling connectors. All power connectors are fully assembled. Crimp contacts are ordered separately, depending on the conductor size. P0 series Power connectors up to 0 A / 60 V, crimp ranges of up to.5 mm / AWG 14, +PE to 5++PE P0 series Power connectors up to 0 A / 60 V, crimp ranges of up to 4 mm / AWG 1, 5+PE / 4++PE P70 series Power connectors up to 70 A / 60 V, crimp ranges of up to 10 mm / AWG 8, ++PE / 4++PE P150 series Power connectors up to 150 A / 60 V, crimp ranges of up to 50 mm / AWG 1, ++PE / 4++PE Table of contents M17 - P0 series Mechanical and electrical data 86 Selection guide 88 Cable plug connectors 90 Coupling connectors 9 Appliance plug connectors 9 Crimp contacts 96 M - P0 series Mechanical and electrical data 98 Selection guide 100 Cable plug connectors and coupling connectors 10 Appliance plug connectors 105 Panel feed-throughs 110 Crimp contacts 11 M40 - P70 series Mechanical and electrical data 114 Selection guide 116 Cable plug connectors and coupling connectors 118 Appliance plug connectors 10 Panel feed-throughs 14 Crimp contacts 18 M58 - P150 series Mechanical and electrical data 10 Selection guide 1 Cable plug connectors, coupling connectors and appliance plug connectors 14 Crimp contacts 17 CONINVERS 8

Power connectors - CONINVERS power Quick connection The complete range for electrical power applications Whether signal or power circular connectors are the right choice for an easy and time-saving connection of electrical wires, with transmission capacities of up to 150 A / 60 V. Time-saving connection All power connectors also the 1 and 17-pos. feedback connectors - now have snap load contacts and a pull apart contact carrier as a characteristic feature. This saves installation time, is safe and quick. For efficient processing and high insertion/ withdrawal cycles up to 10,000 the range offers punched-rolled C-HC crimp contacts in taped versions in plug-in diameters of 1 mm and mm. P0 series: M17 up to 0 A/60 V, from page 86 onwards RF series: M signal feedback, from page 54 onwards P0 series: M up to 0 A/60 V, from page 98 onwards P70 series: M40 up to 70 A/60 V, from page 114 onwards P150 series: M58 up to 150 A/60 V, from page 10 onwards 84 CONINVERS

Power connectors - CONINVERS power Quick connection Quick locking The SPEEDCON connectors are locked with approx. a 1/ rotation of the knurled nut, without compromising on density and vibration resistance. The SPEEDCON concept also allows "blind" connection on the device flange. This considerably simplifies handling in narrow installation conditions. Quick contact clip-in This saves installation time: Pull apart contact carrier and snap-in loading contacts are a characteristic feature of all power connectors. Quick shielding A special feature of the power connectors is the extremely elegant shielding that can be carried out with minimal effort. Depending on the design of the braided shield, shield trimming can be avoided completely under certain circumstances. Extra length of braided shield is simply screwed into the housing. This makes it much easier and saves a considerable amount of time especially in the case of solid wires and large connection cross sections. CONINVERS 85

Power connectors - CONINVERS power M17 - P0 series Mechanical and electrical data Mechanical data Housing material: Rotating part: copper-zinc alloy (CuZn), die-cast part: zinc (GD-Zn) Housing surface: Nickel-plated; appliance plug connector: nickel-plated/thick layer passivated (can be painted over) Insulating bodies: Polyamide (PA 66) Contact material: Copper-zinc alloy (CuZn) Contact surface: Nickel-plated (Ni) with a gold layer (Au) Contact connection method: Crimp version Gasket and O ring: Fluorine rubber (FKM) Ambient temperature: -0 C... 15 C Conductor entry: cable plug connectors and coupling connectors for external cable diameters of.5-10 mm, shielded (.5-11.5 mm on request) Locking type: M17 SPEEDCON quick locking, cable plug connector optionally with M17 x 1 control thread Mechanical insertion/withdrawal cycles: Standard: 50, punched-rolled C-HC crimp contacts: up to 10,000 Degree of protection: IP67 when locked Electrical data Number of positions 4 (+PE) 6 (5+PE) 7 (6+PE) 8 (7+PE) 9 (5++PE) Contacts + PE 5 + PE 6 + PE 7 + PE 5 + + PE Contact Ø [mm] 1 1 1 06 1 1 Stranded wire cross section, crimp contacts [mm turned 0.5....5/ 0.08... 1.0/ 0.08... 1.0/ 0.08... 1.0/ 0.08... 0.5/ 0.08... 0.5/ 0.08... 1.0/ /AWG] 4-14 8-18 8-18 8-18 8-0 8-0 8-18 Stranded wire cross section, C-HC crimp [mm contacts 0.08... 0.56/ 0.08... 0.56/ 0.08... 0.56/ /AWG] 8-0 8-0 8-0 Cable clamping range max Ø [mm] 10 10 10 10 10 Nominal current per contact at 5 C 1) 0 (5) ) 14 14 14 6 14 Specifications as per DIN EN 61984:001 Nominal/rated voltage [V] 60 60 60 60 60 60 Test/surge voltage [kv AC] 4 6 6 6 15 6 Surge voltage category III III III III III Pollution degree ) Installation height [m] Up to,000 Up to,000 Up to,000 Up to,000 Up to,000 1) If required, the effective current carrying capacity must be determined according to the application using a derating curve. ) 5 A when occupied with x.5 mm ) The values specified require a correctly locked pair of connectors that are disconnected only for testing and maintenance. If an unlocked connector is exposed to ambient conditions and if there is a danger of contamination, the connector should be sealed using a IP 54 protective cap. Derating curve (for x.5 mm / x 1.0 mm ) based on DIN EN 6051-5- (cable plug connector mounted) Shield attenuation curve based on DIN EN 5089-1-6 SPEEDCON cable connector and appliance connector, angled on the base plate Current [A] 40 5 0 5 0 15 10 1 = 4-pos. x,5mm² 5 = 8-pos. x1,0mm² 0 0 0 40 60 1 80 100 10 Attenuation [db] 10 100 80 60 40 0 0 0 100 1000 Ambient temperature [ C] Frequency [MHz] Note: Plug connectors may only be inserted or removed when the power supply is disconnected. 86 CONINVERS

Power connectors - CONINVERS power M17 - P0 series Connector pin assignments and coding Contact insert numbering (view of plug-in side) Number of positions Pin Socket 4-pos. (+PE) 6 * 6 * Crimp 6-pos. (5+PE) (contact inserts +5 closed) Crimp 6 P E 1 7 4 6 * 1 6 7 4 6 * 7-pos. (6+PE) Crimp 5 6 4 1 6 * 1 6 5 4 6 * 8-pos. (7+PE) 6 P E 5 1 6 * 1 6 5 6 * Crimp 4 7 7 4 9-pos. (5++PE) 6 * 6 * Crimp * with grounding spring PE leading * with grounding spring PE leading Note: The connectors can be equipped with male or female contacts according to the application. For reasons pertaining to safety, only female contacts may be used in the live part of the connector. CONINVERS 87

Power connectors - CONINVERS power M17 - P0 series Selection guide M17 power and feedback connectors 4 / 6 / 7 / 8 / 9-pos., up to 0 A / 60 V, crimp ranges of 0.08 mm to.5 mm / AWG 8 to 14 Cable plug connectors Coupling connectors Appliance plug connectors (device flange) The P0 connectors are fully assembled and the respective crimp contacts must be ordered separately. Every housing type can be equipped with male or female contacts. The P0 connectors are equipped with SPEEDCON quick locking or with standard M17 screw thread. The connectors with an external thread are fully compatible with standard threads and with the SPEEDCON quick locking. The product chart provides an overview of the available components. shielded Connector type Cable plug connectors SPEEDCON quick locking, page 90 ST-...1N8A80..S M17 x 1 standard locking, page 91 ST-...1N8A80.. Coupling connectors page 9 Square mounting flange for cable plug connectors and coupling connectors for wall mounting, page 15 Square mounting flange for cable plug connectors and coupling connectors for wall mounting, page 15 shielded shielded ST-...1N8A90..S Appliance plug connectors straight, page 9 straight, with contact carriers for snapping in, page 9 ST-...1N8AWQ00S ST-...1N8AW400S straight, with central fastening thread, front mounting, page 95 straight, with central fastening thread, rear mounting, page 95 ST-...1N8A6100S ST-...1N8AH100S angled rotatable, page 94 ST-...1N8AAD00S, ST-...1N8AAC00S 88 CONINVERS

Power connectors - CONINVERS power M17 - P0 series Crimp contacts Female contacts Turned, page 97 Tools / accessories Crimping tools Crimping pliers for punched-rolled C-HC crimp contacts, page 144 Punched-rolled, taped, page 96 Crimping pliers for turned crimp contacts, page 145 All housings can be equipped with male or female crimp contacts Crimping pliers with digital display for turned crimp contacts, page 150 Male contacts Turned, page 97 Removal tool for contact carrier For appliance plug connectors with contact carriers snapping in from the device side, page 15 Note: For reasons pertaining to safety, only female contacts may be used in the live part of the connector. CONINVERS 89

Power connector - CONINVERS power M17 - P0 series Cable plug connector with SPEEDCON quick locking The SPEEDCON thread allows quick locking of cable connector and coupling connector or device flange. They are locked by rotating the knurled nut clockwise until it stops. The knurled nut has a left stop. This allows "blind" connection of the connector. Cable plug connectors of the P0 series are either provided with the standard M17 screw locking or with the SPEEDCON quick locking. ST-.ES1N8A800.S Cable plug connector SPEEDCON quick locking, for female contacts ST-.EP1N8A800.S Cable plug connector SPEEDCON quick locking, for male contacts Description Cable seal Ø [mm] M17 cable plug connector SPEEDCON, 4-pos. (+PE), straight M17 cable plug connector SPEEDCON, 6-pos. (5+PE), straight M17 cable plug connector SPEEDCON, 7-pos. (6+PE), straight M17 cable plug connector SPEEDCON, 8-pos. (7+PE), straight M17 cable plug connector SPEEDCON, 9-pos. (5++PE), straight.5... 5 ST-ES1N8A800S 1607681 0 ST-EP1N8A800S 160766 0 5... 8 ST-ES1N8A800S 160768 0 ST-EP1N8A800S 1607665 0 8... 10 ST-ES1N8A8004S 1607685 0 ST-EP1N8A8004S 1607667 0.5... 5 ST-5ES1N8A800S 1607715 0 ST-5EP1N8A800S 1607698 0 5... 8 ST-5ES1N8A800S 1607718 0 ST-5EP1N8A800S 1607700 0 8... 10 ST-5ES1N8A8004S 160770 0 ST-5EP1N8A8004S 160770 0.5... 5 ST-6ES1N8A800S 161576 0 ST-6EP1N8A800S 161557 0 5... 8 ST-6ES1N8A800S 161578 0 ST-6EP1N8A800S 161559 0 8... 10 ST-6ES1N8A8004S 161580 0 ST-6EP1N8A8004S 161561 0.5... 5 ST-7ES1N8A800S 160775 0 ST-7EP1N8A800S 160774 0 5... 8 ST-7ES1N8A800S 1607756 0 ST-7EP1N8A800S 160776 0 8... 10 ST-7ES1N8A8004S 1607759 0 ST-7EP1N8A8004S 160778 0.5... 5 ST-8ES1N8A800S 161618 0 ST-8EP1N8A800S 161599 0 5... 8 ST-8ES1N8A800S 16160 0 ST-8EP1N8A800S 161601 0 8... 10 ST-8ES1N8A8004S 1616 0 ST-8EP1N8A8004S 16160 0 Crimp contacts: 4-pos.: Ø mm, 6-/7-/8-pos.: Ø 1 mm, 9-pos.: Ø 1 mm / Ø 0.6 mm Order separately, see page 96 onwards Order separately, see page 96 onwards min.5, O 1, ST-.ES1N8A800.S, ST-.EP1N8A800.S 90 CONINVERS

Power connector - CONINVERS power M17 - P0 series Cable plug connector with standard interlocking For reasons of backwards compatibility, the cable plug connector is also provided with a standard screw locking. In this version, it is suitable for a standard screw thread as well as a SPEEDCON external thread of the mating connector, e.g. a straight device flange. A special feature is the availability of the connector as a female version and male version. ST-.ES1N8A800. Cable plug connector standard interlocking, for female contacts ST-.EP1N8A800. Cable plug connector standard interlocking, for male contacts Description Cable seal Ø [mm] M17 cable plug connector, 4-pos. (+PE), straight M17 cable plug connector, 6-pos. (5+PE), straight M17 cable plug connector, 7-pos. (6+PE), straight M17 cable plug connector, 8-pos. (7+PE), straight M17 cable plug connector,9-pos. (5++PE), straight.5... 5 ST-ES1N8A800 1607679 0 ST-EP1N8A800 1607661 0 5... 8 ST-ES1N8A800 160768 0 ST-EP1N8A800 160766 0 8... 10 ST-ES1N8A8004 1607684 0 ST-EP1N8A8004 1607666 0.5... 5 ST-5ES1N8A800 1607714 0 ST-5EP1N8A800 1607697 0 5... 8 ST-5ES1N8A800 1607717 0 ST-5EP1N8A800 1607699 0 8... 10 ST-5ES1N8A8004 1607719 0 ST-5EP1N8A8004 1607701 0.5... 5 ST-6ES1N8A800 161575 0 ST-6EP1N8A800 161556 0 5... 8 ST-6ES1N8A800 161577 0 ST-6EP1N8A800 161558 0 8... 10 ST-6ES1N8A8004 161579 0 ST-6EP1N8A8004 161560 0.5... 5 ST-7ES1N8A800 160775 0 ST-7EP1N8A800 16077 0 5... 8 ST-7ES1N8A800 1607755 0 ST-7EP1N8A800 160775 0 8... 10 ST-7ES1N8A8004 1607758 0 ST-7EP1N8A8004 160777 0.5... 5 ST-8ES1N8A800 161617 0 ST-8EP1N8A800 161598 0 5... 8 ST-8ES1N8A800 161619 0 ST-8EP1N8A800 161600 0 8... 10 ST-8ES1N8A8004 16161 0 ST-8EP1N8A8004 16160 0 Crimp contacts: 4-pos.: Ø mm, 6-/7-/8-pos.: Ø 1 mm, 9-pos.: Ø 1 mm / Ø 0.6 mm Order separately, see page 96 onwards Order separately, see page 96 onwards min. 5, Ø1, ST-.ES1N8A800., ST-.EP1N8A800. CONINVERS 91

Power connector - CONINVERS power M17 - P0 series Coupling plug connector The coupling plug connector is available only with SPEEDCON thread. They can be screwed together with the SPEEDCON thread as well as with the full thread of the mating connector. The plug-in position is marked clearly using an arrow. ST-.ES1N8A900.S Coupling plug connector SPEEDCON/standard interlocking, for female contacts ST-.EP1N8A900.S Coupling plug connector SPEEDCON/standard interlocking, for male contacts Description Cable seal Ø [mm] M17 coupling plug connector,4-pos. (+PE), straight M17 coupling plug connector,6-pos. (5+PE), straight M17 coupling plug connector,7-pos. (6+PE), straight M17 coupling plug connector,8-pos. (7+PE), straight.5... 5 ST-ES1N8A900S 1607687 0 ST-EP1N8A900S 1607669 0 5... 8 ST-ES1N8A900S 1607688 0 ST-EP1N8A900S 1607670 0 8... 10 ST-ES1N8A9004S 1607689 0 ST-EP1N8A9004S 1607671 0.5... 5 ST-5ES1N8A900S 16077 0 ST-5EP1N8A900S 1607705 0 5... 8 ST-5ES1N8A900S 16077 0 ST-5EP1N8A900S 1607706 0 8... 10 ST-5ES1N8A9004S 160774 0 ST-5EP1N8A9004S 1607707 0.5... 5 ST-6ES1N8A900S 16158 0 ST-6EP1N8A900S 16156 0 5... 8 ST-6ES1N8A900S 16158 0 ST-6EP1N8A900S 161564 0 8... 10 ST-6ES1N8A9004S 161584 0 ST-6EP1N8A9004S 161565 0.5... 5 ST-7ES1N8A900S 160776 0 ST-7EP1N8A900S 1607740 0 5... 8 ST-7ES1N8A900S 1607764 0 ST-7EP1N8A900S 1607741 0 8... 10 ST-7ES1N8A9004S 1607765 0 ST-7EP1N8A9004S 160774 0 M17 coupling plug connector,9-pos. (5++PE), straight.5... 5 ST-8ES1N8A900S 16164 0 ST-8EP1N8A900S 161605 0 5... 8 ST-8ES1N8A900S 16165 0 ST-8EP1N8A900S 161606 0 8... 10 ST-8ES1N8A9004S 16166 0 ST-8EP1N8A9004S 161607 0 Crimp contacts: 4-pos.: Ø mm, 6-/7-/8-pos.: Ø 1 mm, 9-pos.: Ø 1 mm / Ø 0.6 mm Order separately, see page 96 onwards Order separately, see page 96 onwards min.50,5 M17 SPEEDCON ST-.ES1N8A900.S, ST-.EP1N8A900.S 9 CONINVERS

Appliance plug connector, straight, front mounting Devices are partially supplied with punched on and pre-assembled contact carriers, e.g. encoder for servo motors. It is practical in such cases to install the insulation body into the pre-assembled housing from behind. This version with contact carrier for snapping-in requires a removal tool for removing the contact carrier again from the front. ST-.E.1N8AWQ00S Appliance plug connector, straight, SPEEDCON/standard interlocking Power connector - CONINVERS power M17 - P0 series ST-.E.1N8AW400S Appliance plug connector, straight, SPEEDCON/standard interlocking contact insert for snapping in Description No. of pos. M17 appliance plug connector, straight, for female contacts M17 appliance plug connector, straight, for male contacts 4(+PE) ST-ES1N8AWQ00S 1607694 0 ST-ES1N8AW400S 160769 0 6(5+PE) ST-5ES1N8AWQ00S 160778 0 ST-5ES1N8AW400S 160777 0 7(6+PE) ST-6ES1N8AWQ00S 161589 0 ST-6ES1N8AW400S 161588 0 8(7+PE) ST-7ES1N8AWQ00S 1607769 0 ST-7ES1N8AW400S 1607768 0 9(5++PE) ST-8ES1N8AWQ00S 16161 0 ST-8ES1N8AW400S 16160 0 4(+PE) ST-EP1N8AWQ00S 1607675 0 ST-EP1N8AW400S 1607674 0 6(5+PE) ST-5EP1N8AWQ00S 1607711 0 ST-5EP1N8AW400S 1607710 0 7(6+PE) ST-6EP1N8AWQ00S 161570 0 ST-6EP1N8AW400S 161569 0 8(7+PE) ST-7EP1N8AWQ00S 1607747 0 ST-7EP1N8AW400S 1607746 0 9(5++PE) ST-8EP1N8AWQ00S 16161 0 ST-8EP1N8AW400S 161611 0 Crimp contacts: 4-pos.: Ø mm, 6-/7-/8-pos.: Ø 1 mm, Order separately, see page 96 onwards Order separately, see page 96 onwards 9-pos.: Ø 1 mm / Ø 0.6 mm Removal tool for contact carrier Order separately, see page 15 4xM,5 1,6 16,8 1 0,85 1,6 16,8 1 0,85 17±0,1 16,8 M17 SPEEDCON M17 SPEEDCON 16,8 Installation dimensions Ø 4x,7 ST-.E.1N8AWQ00S Ø 4x,7 ST-.E.1N8AW400S CONINVERS 9

Power connector - CONINVERS power M17 - P0 series Appliance plug connector, angled, rotatable, front mounting The angled panel mounting bases are progressively rotatable up to 08 for optimum adjustment to the respective application. In addition, two flange dimension versions with 1.6 mm x 1.6 mm or 5 mm x 5 mm are available. Panel mounting plug connector angled, rotatable, flange dimensions 8 x 8 mm on request. ST-.E.1N8AAD00S Appliance plug connector, angled, rotatable, SPEEDCON/standard interlocking, flange dimension: 1.6 mm ST-.E.1N8AAC00S Appliance plug connector, angled, rotatable, SPEEDCON/standard interlocking, flange dimension: 5 mm Description No. of pos. M17 appliance plug connector, angled, rotatable, for female contacts M17 appliance plug connector, angled, rotatable, for male contacts 4(+PE) ST-ES1N8AAD00S 1607691 16 ST-ES1N8AAC00S 1607690 16 6(5+PE) ST-5ES1N8AAD00S 160776 16 ST-5ES1N8AAC00S 160775 16 7(6+PE) ST-6ES1N8AAD00S 161586 16 ST-6ES1N8AAC00S 161585 16 8(7+PE) ST-7ES1N8AAD00S 1607767 16 ST-7ES1N8AAC00S 1607766 16 9(5++PE) ST-8ES1N8AAD00S 16168 16 ST-8ES1N8AAC00S 16167 16 4(+PE) ST-EP1N8AAD00S 160767 16 ST-EP1N8AAC00S 160767 16 6(5+PE) ST-5EP1N8AAD00S 1607709 16 ST-5EP1N8AAC00S 1607708 16 7(6+PE) ST-6EP1N8AAD00S 161567 16 ST-6EP1N8AAC00S 161566 16 8(7+PE) ST-7EP1N8AAD00S 1607744 16 ST-7EP1N8AAC00S 160774 16 9(5++PE) ST-8EP1N8AAD00S 161609 16 ST-8EP1N8AAC00S 161608 16 Crimp contacts: 4-pos.: Ø mm, 6-/7-/8-pos.: Ø 1 mm, 9-pos.: Ø 1 mm / Ø 0.6 mm Order separately, see page 96 onwards Order separately, see page 96 onwards,5,5 M17 SPEEDCON 0 105 M17 SPEEDCON 0 105 6, 1, 6, 1, Ø 4x,7 Ø 4x,7 16,8 1,6 19,8 5 4xM,5 Ø17±0,1 4xM,5 min.ø17 max.ø0, 45 45 16,8 Ø,8 19,8 Ø8 ST-.ES1N8AAD00S, ST-.EP1N8AAD00S ST-.ES1N8AAC00S, ST-.EP1N8AAC00S 94 CONINVERS

Appliance plug connector, central fastening thread, front and rear mounting The device flanges with central fastening thread are screwed onto the mounting panel from outside or inside. The contact carriers are fastened from the device side by clipping them in and snapping them in place. A removal tool is required for removing the contact carrier again from the front. Power connector - CONINVERS power M17 - P0 series ST-.E.1N8A6100S Appliance plug connector, front mounting, SPEEDCON/standard interlocking, central fastening thread M18 x 0.75 ST-.E.1N8AH100S Appliance plug connector, rear mounting, SPEEDCON/standard interlocking, central fastening thread M0 x 1.5 Description No. of pos. M17 appliance plug connector, for female contacts 4(+PE) ST-ES1N8A6100S 161546 0 ST-ES1N8AH100S 161547 0 6(5+PE) ST-5ES1N8A6100S 161550 0 ST-5ES1N8AH100S 161551 0 7(6+PE) ST-6ES1N8A6100S 16157 0 ST-6ES1N8AH100S 161587 0 8(7+PE) ST-7ES1N8A6100S 16159 0 ST-7ES1N8AH100S 16159 0 9(5++PE) ST-8ES1N8A6100S 161614 0 ST-8ES1N8AH100S 16169 0 M17 appliance plug connector, for male contacts 4(+PE) ST-EP1N8A6100S 161544 0 ST-EP1N8AH100S 161545 0 6(5+PE) ST-5EP1N8A6100S 161548 0 ST-5EP1N8AH100S 161549 0 7(6+PE) ST-6EP1N8A6100S 16155 0 ST-6EP1N8AH100S 161568 0 8(7+PE) ST-7EP1N8A6100S 161590 0 ST-7EP1N8AH100S 161591 0 9(5++PE) ST-8EP1N8A6100S 161595 0 ST-8EP1N8AH100S 161610 0 Locking nut, for mounting bore holes and polarization M18 x 0.75 ST-E015151 16181 5 M0 x 1.5 RC-1041 1600417 5 Crimp contacts: 4-pos.: Ø mm, 6-/7-/8-pos.: Ø 1 mm, Order separately, see page 96 onwards Order separately, see page 96 onwards 9-pos.: Ø 1 mm / Ø 0.6 mm Removal tool for contact carrier Order separately, see page 15 Order separately, see page 15 0,6 11,4 max.5 Ø18,+0,1 min. 0,8 M18x0,75 min. 1,5 M17 SPEEDCON M18x0,75 Ø 1, 17,1+0,1 ST-.ES1N8A6100S, ST-.EP1N8A6100S Separate ordering for locking nut 8 Installation dimensions: ST-.E.1N8A6100S, bore hole with polarization and locking nut (recommended for installation in steel sheet panel) Installation dimensions: ST-.E.1N8A6100S, feed-through hole with thread (recommended for installation in steel sheet panel) 5, max.8 6,7 Ø0,+0,1 min. 0,8 M0x1,5 min. M0x1,5 M17 SPEEDCON Ø 6 18,1+0,1 11,4 ST-.ES1N8AH100S, ST-.EP1N8AH100S Separate ordering for locking nut Installation dimensions: ST-.E.1N8AH100S, bore hole with polarization and locking nut (recommended for installation in steel sheet panel) Installation dimensions: ST-.E.1N8AH100S, feed-through hole with thread (recommended for installation in steel sheet panel) CONINVERS 95

Power connector - CONINVERS power M17 - P0 series Crimp contacts, punched-rolled C-HC are punched-rolled female contacts with hyperboloid-shaped contact ridges and integrated wire and insulation crimp. The high-performance crimp contacts are designed for up to 10,000 insertion/withdrawal cycles. The contacts are available taped on rolls for manual or automatic processing. Note: Depending on the wire used, the connection cross-sections (crimp ranges) can differ from the values mentioned below. SF-10KS.0 C-HC female contacts for processing with manual crimping machines SF-10KS.0 C-HC female contacts for processing with crimping machines Description Connection cross section [mm / AWG] C-HC female contacts, punched-rolled, Taped, Ø 1 mm, 500 pieces/ roll C-HC female contacts, punched-rolled, Taped, Ø 1 mm, 10,000 pieces/ roll 0,08... 0, / 8-4 SF-10KS0 160701 1 0,... 0,56 / 4-0 SF-10KS50 16070 1 0,08... 0, / 8-4 SF-10KS0 160758 1 0,... 0,56 / 4-0 SF-10KS60 160761 1 Crimping tools for punched-rolled C-HC crimp contacts Order separately, see page 144 onwards Order separately, see page 144 onwards Contact diameter Number of positions Number of contacts Contact Ø [mm] 4(+PE) 4 6(5+PE) 6 1 7(6+PE) 7 1 8(7+PE) 8 1 9(5++PE) 5++PE 0,6+1+1 1 *) 1 0,6 17 17 0,6 *) in preparation Ø1 6,05 A 14,5 Ø1,5 1,7 C-HC female contact Ø 1 mm A = D-SUB dimension,8 96 CONINVERS

Power connector - CONINVERS power M17 - P0 series Crimp contacts, turned The P0 series connectors are equipped with contacts Ø mm, Ø 1 mm or Ø 0.6 mm depending on the number of positions (see table below). Note: Depending on the wire used, the connection cross-sections (crimp ranges) can differ from the values mentioned below. S.-...0.. Crimp contacts socket S.-...0.. Crimp contacts pin Description Connection cross section [mm / AWG] Contact socket Ø.0 mm Contact socket Ø 1.0 mm 0,5... 1,0 / 4-18 ST-0KS010 1607657 100 1.0....5 / 18-14 ST-0KS00 1607658 100 0,08... 0, / 4-18 SF-6CS000 160556 100 0,14... 0,5 / 6-0 SF-10KS004 160756 100 0,5... 1,0 / 0-18 SF-6AS000 1605557 100 Wire spring contact, 0.14... 1,0 / 6-18 SF-10KS010 1605481 100 Contact socket Ø 0.6 mm 0,08... 0,5 / 8-4 ST-06KS010 1607580 100 0,14... 0,4 / 6- ST-06KS00 1607581 100 0,4... 0,5 / -0 ST-06KS00 160758 100 Contact pin Ø.0 mm 0,5... 1,0 / 4-18 ST-0KP010 1607655 100 1,0...,5 / 18-14 ST-0KP00 1607656 100 Contact pin Ø 1.0 mm 0,08... 0, / 8-4 SF-6CP000 1605559 100 0,14... 0,5 / 6-0 SF-10KP004 160755 100 0,5... 1,0 / 0-18 SF-6AP000 1605554 100 Contact pin Ø 0.6 mm 0,08... 0,5 / 8-4 ST-06KP010 1607577 100 0,14... 0,4 / 6- ST-06KP00 1607578 100 0,4... 0,5 / -0 ST-06KP00 1607579 100 Crimping tools Order separately, see page 145 onwards Order separately, see page 145 onwards Crimping tool with digital display Order separately, see page 150 Order separately, see page 150 Contact diameter Number of positions Number of contacts Contact Ø [mm] 4(+PE) 4 6(5+PE) 6 1 7(6+PE) 7 1 8(7+PE) 8 1 9(5++PE) 5++PE 0,6+1+1 1 *) 1 0,6 17 17 0,6 *) in preparation Notes: Every connector housing type can be equipped with male or female contacts. For reasons pertaining to safety, only female contacts may be used in the live part of the connector. CONINVERS 97

Power connectors - CONINVERS power M - P0 series Mechanical and electrical data Mechanical data Housing material: Rotating part: copper-zinc alloy (CuZn), die-cast part: zinc (GD-Zn) Housing surface: Nickel-plated; appliance plug connector: nickel-plated/thick layer passivated (can be painted over) Insulating bodies: Polyamide (PA 66) Contact material: Copper-zinc alloy (CuZn) Contact surface: Nickel-plated (Ni) with a gold layer (Au) Contact connection method: Crimp version Gasket and O ring: Fluorine rubber (FKM) Ambient temperature: -0 C... 15 C Conductor entry: Cable plug connectors and coupling connectors for external cable diameters of 7.5-18 mm shielded Locking type: M screw locking Mechanical insertion/withdrawal cycles: Standard: 50, punched-rolled C-HC crimp contacts: up to 10,000 Degree of protection: IP67 when locked Approval: An overview of the listed connectors as per UL, cul and VDE will be available on request. Electrical data Number of positions 6 (5+PE) 8 (4++PE) Contacts 5 + PE 4 + + PE Contact Ø [mm] 1 Stranded wire cross sections Short version, cable Ø max. 14 mm [mm /AWG] 0.5....5 / 4-14 0.08... 1.0 / 8-18 0.5....5 / 4-14 0.5....5 / 4-14 Long version, cable Ø max. 18 mm [mm /AWG] 0.5... 4.0 / 4-1 0.08... 1.0 / 8-18 0.5... 4.0 / 4-1 0.5... 4.0 / 4-1 Appliance plug connectors [mm /AWG] 0.5... 4.0 / 4-1 0.08... 1.0 / 8-18 0.5... 4.0 / 4-1 0.5... 4.0 / 4-1 Nominal current per contact at 5 C 1) 0 9 0 Specifications as per DIN EN 61984:001 Nominal/rated voltage [V] 60 ) 50 60 ) Test/surge voltage [kv AC] 6 4 6 Surge voltage category III III Pollution degree ) Installation height [m] Up to,000 Up to,000 1) If required, the effective current carrying capacity must be determined according to the application using a derating curve. ) 400 V when equipped with punched-rolled C-HC contacts ) The values specified require a correctly locked pair of connectors that are disconnected only for testing and maintenance. If an unlocked connector is exposed to ambient conditions and if there is a danger of contamination, the connector should be sealed using a IP 54 protective cap. Derating curve (for x 4 mm / 5 x 4 mm ) based on DIN EN 6051-5- (cable plug connector mounted) Shield attenuation curve based on DIN EN 5089-1-6 SPEEDCON (cable connectors and appliance plug connectors, angled on the base plate) Current [A] 4 16 8 1 = x 4mm² = 5 x 4mm² 0 0 0 40 60 80 1 100 10 140 Attenuation [db] 10 100 80 60 40 0 0 0 100 1000 Ambient temperature [ C] Frequency [MHz] 98 CONINVERS

Power connectors - CONINVERS power M - P0 series Connector pin assignments and coding Contact insert numbering (view of plug-in side) Number of positions Pin Socket 6 * 6 * 6-pos. (5 + PE) Crimp 1 6 5 4 * with grounding spring, pos. leading 4 5 6 1 * with grounding spring, pos. 6 * 6 * 8-pos. (4 + + PE) Crimp D C 1 A B * with grounding spring, pos. 1 A B D C * with grounding spring, pos. leading CONINVERS 99

Power connectors - CONINVERS power M - P0 series Selection guide M power connectors up to 0 A / 60 V, crimp ranges of up to 4 mm / AWG 1 Cable plug connectors Coupling connectors Appliance plug connectors (device flange) Feed-throughs / panel feed-throughs The P0 connectors are fully assembled and the respective crimp contacts must be ordered separately. The product chart provides an overview of the available components. shielded Connector type Cable plug connectors short, page 10 long, page 10 with M0x1.5 for ext. cable gland, page 104 SF-..S1N8A80.. SF-..S1N8A8L.. SF-..S1N8AR4DU Appliance plug connector with knurled nut Outside panel assembly, page 109 -part housing for higher loads, page 109 SF-..S1N8AY000 SF-..S1N8AYW00 Coupling connectors short, page 10 long, page 10 with M0x1.5 for ext. cable gland, page 104 shielded SF-..P1N8A90.. SF-..P1N8A9L.. SF-..P1N8AF4DU with mounting flange short, page 110 with mounting flange long, page 110 SF-..P1N8AC0.. SF-..P1N8ACL.. Appliance plug connectors straight, page 105 straight low design, page 105 -part housing for higher loads, page 106 SF-..P1N8AWA00 SF-..P1N8AWK00 SF-..P1N8AA00 rotatable, page 108 rotatable, larger flange dimensions, page 108 fixed, page 107 fixed, larger flange dimensions, page 107 shielded SF-..P1N8AAD00 SF-..P1N8AAC00 SF-..P1N8AAF00 SF-..P1N8AAK00 Panel feed-through socket outside - pin inside, page 111 SF-..E1N8AS000 Panel feed-throughs are delivered in a fully wired state 100 CONINVERS

Power connectors - CONINVERS power M - P0 series Crimp contacts Female contacts Turned, page 11 Tools / accessories Crimping tools Crimping pliers for punched-rolled C-HC crimp contacts, page 144 Female contacts Punched-rolled taped, page 11 Crimping pliers for turned crimp contacts, page 147 Male contacts Crimping pliers with digital display for turned crimp contacts, page 150 Male contacts Turned, page 11 Male contacts Note: For reasons pertaining to safety, only female contacts may be used in the live part of the connector. CONINVERS 101

Power connector - CONINVERS power M - P0 series Cable plug connector - socket, long and short type P0 are M power connectors for higher transmission capacities and connection cross-sections. Electrical power up to 50/60 V at 9/0 A can be transmitted with connection cross-sections of 4 mm / AWG 1. Two connector lengths are available for the cable and coupling plug connectors for power and cable-side adjustment to the respective application: Short version: for connection crosssections up to.5 mm / AWG 14 and max. cable diameter of 14 mm, shielded. Long version: for connection crosssections up to 4 mm / AWG 1and max. cable diameter of 18 mm, shielded. The crimp contacts can be quickly assembled by snapping into place in the contact carrierand allow short assembly times. The braided shield directly contacts the housing over a 60 all-round contact, irrespective of the cable diameter. The cable and coupling plug connectors are supplied with cable gaskets for various conductor diameters. Crimp contacts are ordered separately depending on the respective connection cross-sections. The cable plug connectors must be equipped with female contacts. SF-.ES1N8A8... Cable plug connector in short / long versions Description Cable seal Ø [mm] Cable plug connector P0, 6-pos. (5+PE), shielded, straight, short for a Ø 7.5 mm to 14 mm cable, connection cross section of up to.5 mm / AWG 14 universal 7.5... 14,0 SF-5ES1N8A80DU 16055 0 7,5... 9,0 SF-5ES1N8A80A1 160554 0 9,0... 11,0 SF-5ES1N8A80A 160556 0 11,0... 14,0 SF-5ES1N8A80A 160559 0 Cable plug connector P0, 6-pos. (5+PE), shielded, straight, long for a Ø 7.5 mm to 18 mm cable, connection cross section of up to 4 mm / AWG 1 universal 7.5... 18,0 SF-5ES1N8A8LDL 1605549 0 7,5... 9,0 SF-5ES1N8A8LB4 1605548 0 9,0... 1,0 SF-5ES1N8A8LB 1605546 0 1,0... 15,0 SF-5ES1N8A8LB 1605545 0 15,0... 18,0 SF-5ES1N8A8LB1 160554 0 Cable plug connector P0, 8-pos. (4++PE), shielded, straight, short for a Ø 7.5 mm to 14 mm cable, connection cross section of up to.5 mm / AWG 14 universal 7.5... 14,0 SF-7ES1N8A80DU 160560 0 7,5... 9,0 SF-7ES1N8A80A1 1605595 0 9,0... 11,0 SF-7ES1N8A80A 1605596 0 11,0... 14,0 SF-7ES1N8A80A 1605597 0 Cable plug connector P0, 8-pos. (4++PE), shielded, straight, long for a Ø 7.5 mm to 18 mm cable, connection cross section of up to 4 mm / AWG 1 universal 7.5... 18,0 SF-7ES1N8A8LDL 1605617 0 7,5... 9,0 SF-7ES1N8A8LB4 1605614 0 9,0... 1,0 SF-7ES1N8A8LB 1605610 0 1,0... 15,0 SF-7ES1N8A8LB 1605607 0 15,0... 18,0 SF-7ES1N8A8LB1 1605605 0 Crimp contacts Signal contacts Ø 1 mm Power and PE contacts Ø mm Order separately, see page 11 onwards Cable clamping ranges, universal seals Housing version Short Long Cable Ø [mm] Cable Ø [mm] State of delivery 7.5... 9 7,5... 8 Section 1 11... 14 16... 18 Section 9... 11 14... 16 Section 1... 14 Section 4 10... 1 Section 5 8... 10 64 6 6 SF-.ES1N8A80.. Ø8 75 6 6 SF-.ES1N8A8L.. Ø 8 10 CONINVERS

Power connector - CONINVERS power M - P0 series Coupling plug connector - pin, long and short type P0 coupling plug connectors are available in two lengths: Short version: for connection crosssections up to.5 mm / AWG 14 and max. cable diameter of 14 mm, shielded. Long version: for connection crosssections up to 4 mm / AWG 1 and max. cable diameter of 18 mm, shielded. Both versions are available in 6-pos. (5+PE) and 8-pos (4++PE). SF-.EP1N8A90.. Coupling plug connector, short version SF-.EP1N8A9L.. Coupling plug connector, long version Description Cable seal Ø [mm] Coupling plug connector P0, 6-pos. (5+PE), shielded, straight, short for a Ø 7.5 mm to 14 mm cable, connection cross section of up to.5 mm / AWG 14 universal 7.5... 14,0 SF-5EP1N8A90DU 1605499 0 7,5... 9,0 SF-5EP1N8A90A1 1605494 0 9,0... 11,0 SF-5EP1N8A90A 1605496 0 11,0... 14,0 SF-5EP1N8A90A 1605498 0 Coupling plug connector P0, 8-pos. (4++PE), shielded, straight, short for a Ø 7.5 mm to 14 mm cable, connection cross section of up to.5 mm / AWG 14 universal 7.5... 14,0 SF-7EP1N8A90DU 1605575 0 7,5... 9,0 SF-7EP1N8A90A1 1605568 0 9,0... 11,0 SF-7EP1N8A90A 1605570 0 11,0... 14,0 SF-7EP1N8A90A 1605571 0 Coupling plug connector P0, 6-pos. (5+PE), shielded, straight, long for a Ø 7.5 mm... 18 mm cable, connection cross section of up to 4 mm / AWG 1 universal 7.5... 18,0 SF-5EP1N8A9LDL 1605510 0 7,5... 9,0 SF-5EP1N8A9LB4 1605509 0 9,0... 1,0 SF-5EP1N8A9LB 1605508 0 1,0... 15,0 SF-5EP1N8A9LB 1605507 0 15,0... 18,0 SF-5EP1N8A9LB1 1605505 0 Coupling plug connector P0, 8-pos. (4++PE), shielded, straight, long for a Ø 7.5 mm to 18 mm cable, connection cross section of up to 4 mm / AWG 1 universal 7.5... 18,0 SF-7EP1N8A9LDL 160558 0 7,5... 9,0 SF-7EP1N8A9LB4 160558 0 9,0... 1,0 SF-7EP1N8A9LB 1605581 0 1,0... 15,0 SF-7EP1N8A9LB 1605580 0 15,0... 18,0 SF-7EP1N8A9LB1 1605578 0 Crimp contacts Order separately, see page 11 onwards Order separately, see page 11 onwards Signal contacts Ø 1 mm Power and PE contacts Ø mm Cable clamping ranges, universal seals Housing version Short Long 60,1 6 6 70,9 6 6 Cable Ø [mm] Cable Ø [mm] State of delivery 7.5... 9 7,5... 8 Section 1 11... 14 16... 18 Section 9... 11 14... 16 Mx1 Mx1 Section 1... 14 Section 4 10... 1 Section 5 8... 10 SF-.EP1N8A90.. SF-.EP1N8A9L.. CONINVERS 10

Power connector - CONINVERS power M - P0 series Cable and coupling plug connector - socket and pin with M0 thread for external cable gland The P0 cable and coupling plug connector with M0 x 1.5 thread for additional external cable glands is available for special requirements, for example drag chain suitability. SF-.ES1N8AR4DU SF-.EP1N8AF4DU Cable plug connector with additional thread Coupling plug connector with additional thread Description Connector P0, 6-pos. (5+PE), with additional thread M0 x 1.5 for cable gland, for a Ø 7.5 mm to 14 mm cable, connection cross section of up to.5 mm / AWG 14 Connector P0, 8-pos. (4++PE), with additional thread M0 x 1.5 for cable gland, for a Ø 7.5 mm to 14 mm cable, connection cross section of up to.5 mm / AWG 14 SF-5ES1N8AR4DU 160555 0 SF-5EP1N8AF4DU 1605519 0 SF-7ES1N8AR4DU 160561 0 SF-7EP1N8AF4DU 1605588 0 Crimp contacts Order separately, see page 11 onwards Order separately, see page 11 onwards Signal contacts Ø 1 mm Power and PE contacts Ø mm Additional cable gland Order separately, see page 14 Order separately, see page 14 76,4 71,6 6 6 6 6 Clamping ranges Universal seals Cable Ø[mm] Ø 8 Mx1 State of delivery 7,5... 9 Section 1 11... 14 Section 9... 11 SF-.ES1N8AR4DU SF-.EP1N8AF4DU 104 CONINVERS

Power connector - CONINVERS power M - P0 series Straight appliance plug connector, pin, lower and higher type The P0 range offers various appliance plug connectors adapted to the respective application, e.g.: straight housing, also as a lower type for space-saving installation. SF-.EP1N8AW.00 SF-.EP1N8AW.00 Appliance plug connector, straight, low design Appliance plug connector, straight, high design Description No. of pos. Appliance plug connector P0, straight 6-position (5+PE) SF-5EP1N8AWK00 160704 0 SF-5EP1N8AWA00 160550 0 8-position (4++PE) SF-7EP1N8AWK00 1605591 0 SF-7EP1N8AWA00 1605589 0 Crimp contacts Order separately, see page 11 onwards Order separately, see page 11 onwards Signal contacts Ø 1 mm Power and PE contacts Ø mm 6,9 8,4 4,7 8,6 9,4 4,65 1 6 19,8 Mx1 Ø 4x, Mx1 Ø 4x, SF-.EP1N8AWK00 SF-.EP1N8AWA00,6±0,1 19,8±0,1 4xM 4xM Ø,5+0,1 Installation dimensions: SF-.EP1N8AWK00 Ø0+0,1 Installation dimensions: SF-.EP1N8AWA00 CONINVERS 105

Power connector - CONINVERS power M - P0 series Angled, fixed appliance plug connector, pin, for higher loads, flange dimension 6 mm Some applications require shock-resistant housing versions. To meet these requirements, a specially robust version of the angled device connector is available. The housing has a two-piece design, consisting of a solid, fixed angular part and the straight standard flange. SF-.EP1N8AA00 Appliance plug connector, angled fixed Description Appliance plug connector P0, 6-pos. (5+PE), angled fixed, -part housing for higher loads Appliance plug connector P0, 8-pos. (4++PE), angled fixed, -part housing for higher loads SF-5EP1N8AA00 1607906 16 SF-7EP1N8AA00 1607908 16 Crimp contacts Signal contacts Ø 1 mm Power and PE contacts Ø mm Order separately, see page 11 onwards Mx1 5,4 45,9 Ø 4x, 4,65 19,8 6 SF-.EP1N8AA00 19,8±0,1 4xM Ø0+0,1 Installation dimensions: SF-.EP1N8AA00 106 CONINVERS

Power connector - CONINVERS power M - P0 series Angled, fixed appliance plug connector, pin, flange dimensions 6 and 8 mm The angled appliance plug connectors are also available with enlarged flange dimensions for high vibration loads. SF-.EP1N8AAF00 SF-.EP1N8AAK00 Appliance plug connector, angled fixed, flange dimension 6 mm Appliance plug connector, angled fixed, flange dimension 8 mm Description Flange dimension: Appliance plug connector P0, 6-pos. (5+PE), angled, fixed 6 mm x 6 mm SF-5EP1N8AAF00 160706 16 Appliance plug connector P0, 8-pos. (4++PE), angled, fixed 6 mm x 6 mm SF-7EP1N8AAF00 1607046 16 Appliance plug connector P0, 6-pos. (5+PE), angled, fixed 8 mm x 8 mm SF-5EP1N8AAK00 1605515 16 Appliance plug connector P0, 8-pos. (4++PE), angled, fixed 8 mm x 8 mm SF-7EP1N8AAK00 1607047 16 Crimp contacts Order separately, see page 11 onwards Order separately, see page 11 onwards Signal contacts Ø 1 mm Power and PE contacts Ø mm Mx1 Mx1,5 4,65 40 1,85 40 1,85,5 19,8 Ø 4x, 5,4,6 Ø 4x, 6 8 SF-.EP1N8AAF00 SF-.EP1N8AAK00 19,8±0,1,6±0,1 4xM 4xM Ø0+0,1 Installation dimensions: SF-.EP1N8AAF00 Ø0+0,1 Installation dimensions: SF-.EP1N8AAK00 CONINVERS 107

Power connector - CONINVERS power M - P0 series Angled, rotatable appliance plug connector, pin, flange dimensions 6 and 8 mm The P0 range offers various appliance plug connectors, adapted to the respective application: Angled housing, rotatable and fixed, also with enlarged flange dimension for high vibration loads. SF-.EP1N8AA.00 Appliance plug connector, angled rotatable Description Flange dimension: Appliance plug connector P0, 6-pos. (5+PE), angled, rotatable 6 mm x 6 mm SF-5EP1N8AAD00 160551 16 8 mm x 8 mm SF-5EP1N8AAC00 160705 16 Appliance plug connector P0, 8-pos. (4++PE), angled, rotatable 6 mm x 6 mm SF-7EP1N8AAD00 1605586 16 8 mm x 8 mm SF-7EP1N8AAC00 1607045 16 Crimp contacts Signal contacts Ø 1 mm Power and PE contacts Ø mm Order separately, see page 11 onwards Mx1 Mx1 1 98 1 98 40 4,65 1,85 40 4,65 1,85 5,4 19,8 6 Ø 4x, 5,4,6 8 Ø 4x, SF-.EP1N8AAD00 SF-.EP1N8AAC00 19,8±0,1,6±0,1 4xM 4xM Edge abrasion max. 0. Ø0+0,1 Installation dimensions: SF-.EP1N8AAD00 Edge abrasion max. 0. Ø0+0,1 Installation dimensions: SF-.EP1N8AAC00 108 CONINVERS

Appliance plug connectors straight/angled, fixed, socket, with knurls, flange dimension 6 mm Some applications require shock-resistant housing versions. Robust versions of the angled device connector are available to meet these requirements. The housing has a two-piece design, consisting of a solid, fixed angular part and the straight standard flange. Note: Power appliance plug connectors with knurled nuts must be equipped with female contacts. SF-.ES1N8AY000 Appliance plug connector with knurled nut Power connector - CONINVERS power M - P0 series SF-.ES1N8AYW00 Appliance plug connector with knurled nut, angled fixed Description Appliance plug connector P0, with knurled nut, 6-pos. (5+PE), straight Appliance plug connector P0, with knurled nut, 8-pos. (4++PE), straight Appliance plug connector P0, 6-pos. (5+PE), angled fixed, -part housing with knurled nut, for higher loads SF-5ES1N8AY000 160708 0 SF-7ES1N8AY000 16056 0 Appliance plug connector P0, 8-pos. (4++PE), angled fixed, -part housing with knurled nut, for higher loads SF-5ES1N8AYW00 1607405 0 SF-7ES1N8AYW00 160749 0 Crimp contacts Order separately, see page 11 onwards Order separately, see page 11 onwards Signal contacts Ø 1 mm Power and PE contacts Ø mm Ø8 50,5 44 4,65 1 6 19,8 4x, Ø Ø 4x, 8 Ø 4,65 19,8 6 SF-.ES1N8AY000 SF-.ES1N8AYW00 19,8±0,1 19,8±0,1 4xM 4xM Ø0+0,1 Installation dimensions: SF-.ES1N8AY000 Ø0+0,1 Installation dimensions: SF-.ES1N8AYW00 CONINVERS 109

Power connector - CONINVERS power M - P0 series Panel feed-through, pin, long and short type The P0 series provides a complete range of panel feed-throughs in different versions for flexible power cabling of machines and systems. SF-.EP1N8AC... Panel feed-through for inside panel mounting Description Cable seal Ø [mm] Panel feed-through P0, 6-pos. (5+PE), inside, 4xM thread mounting, short for a Ø 7.5 mm to 14 mm cable, connection cross section of up to.5 mm / AWG 14 universal 7.5... 14,0 SF-5EP1N8AC0DU 1605517 10 7,5... 9,0 SF-5EP1N8AC0A1 1605516 10 9,0... 11,0 SF-5EP1N8AC0A 160707 10 11,0... 14,0 SF-5EP1N8AC0A 160708 10 Panel feed-through P0, 6-pos. (5+PE), inside, 4xM thread mounting, long for a Ø 7.5 mm to 18 mm cable, connection cross section of up to 4 mm / AWG 1 universal 7.5... 18,0 SF-5EP1N8ACLDL 1605518 10 7,5... 9,0 SF-5EP1N8ACLB4 160704 10 9,0... 1,0 SF-5EP1N8ACLB 1607041 10 1,0... 15,0 SF-5EP1N8ACLB 1607040 10 15,0... 18,0 SF-5EP1N8ACLB1 160709 10 Panel feed-through P0, 8-pos. (4++PE), inside, 4xM thread mounting, short for a Ø 7.5 mm to 14 mm cable,4 connection cross section of up to.5 mm / AWG 14 universal 7.5... 14,0 SF-7EP1N8AC0DU 1607051 10 7,5... 9,0 SF-7EP1N8AC0A1 1607048 10 9,0... 11,0 SF-7EP1N8AC0A 1607049 10 11,0... 14,0 SF-7EP1N8AC0A 1607050 10 Panel feed-through P0, 8-pos. (4++PE), inside, 4xM thread mounting, long for a Ø 7.5 mm to 18 mm cable, connection cross section of up to 4 mm / AWG 1 universal 7.5... 18,0 SF-7EP1N8ACLDL 1607056 10 7,5... 9,0 SF-7EP1N8ACLB4 1607055 10 9,0... 1,0 SF-7EP1N8ACLB 1607054 10 1,0... 15,0 SF-7EP1N8ACLB 160705 10 15,0... 18,0 SF-7EP1N8ACLB1 160705 10 Crimp contacts Signal contacts Ø 1 mm Power and PE contacts Ø mm Order separately, see page 11 onwards 60,1 70,9 0, 6,15 0, 6,15 Ø 7,9 Mx1 Ø 7,9 Mx1 Cable clamping ranges, universal seals SF-.EP1N8AC0.. SF-.EP1N8ACL.. Housing version Short Long Cable Ø [mm] Cable Ø [mm] State of delivery 7.5... 9 7,5... 8 Section 1 11... 14 16... 18 Section 9... 11 14... 16 Section 1... 14 Section 4 10... 1 Section 5 8... 10 7,95 Flange dimensions: SF-.EP1N8AC0.., SF-.EP1N8ACL.. 4xM 4xØ, 9,4±0,1 Ø8,±0,1 Ø41,6 Installation dimensions: SF-.EP1N8AC0.., SF-.EP1N8ACL.. 110 CONINVERS

Power connector - CONINVERS power M - P0 series Panel feed-through, fully wired, pin/socket The power panel feed-throughs for outside panel assembly are supplied completely wired internally and equipped with contacts. SF-.EE1N8AS000 Panel feed-through for outside panel assembly Description Panel feed-through P0, 6-pos. (5+PE), outside, pin inside - socket outside, completely wired Panel feed-through P0, 8-pos. (4++PE), outside, pin inside - socket outside, completely wired SF-5EE1N8AS000 160549 1 SF-7EE1N8AS000 1605567 1 7,95 6, 77,7, 4xØ, 4xM Mx1 Ø 8 9,4±0,1 Ø8,±0,1 Ø41,6 SF-5EE1N8AS000, SF-7EE1N8AS000 Installation dimensions CONINVERS 111

Power connector - CONINVERS power M - P0 series Crimp contacts, punched-rolled C-HC are punched-rolled female contacts with hyperboloid-shaped contact ridges and integrated wire and insulation crimp. The high-performance crimp contacts are designed for up to 10,000 insertion/withdrawal cycles. The contacts are available taped on rolls for manual or automatic processing. Note: Depending on the wire used, the connection cross-sections (crimp ranges) can differ from the values mentioned below. SF-.0KS.0 C-HC female contacts for processing with manual crimping machines SF-10KS.0 C-HC female contacts for processing with crimping machines Description Connection cross section [mm / AWG] C-HC female contacts, punched-rolled, Taped, Ø 1 mm,,500 pieces / roll C-HC female contacts, punched-rolled, Taped, Ø 1 mm, 10,000 pieces/ roll C-HC female contacts, punched-rolled, Taped, Ø mm, 1000 pieces / roll C-HC female contacts, punched-rolled, Taped, Ø mm, 4000 pieces / roll 0,08... 0, / AWG 8-4 SF-10KS0 160701 1 0,... 0,56 / AWG 4-0 SF-10KS50 16070 1 0,08... 0, / AWG 8-4 SF-10KS0 160758 1 0,... 0,56 / AWG 4-0 SF-10KS60 160761 1 1,0...,5 / AWG 18-14 SF-0KS50 160704 1 1,0...,5 / AWG 18-14 SF-0KS60 160781 1 Crimping tools for punched-rolled C-HC crimp contacts Order separately, see page 144 Order separately, see page 144 14,5 Ø1,5 9 Ø1,5 6,05 1,7 7,8,8 Ø1 Contact diameter Ø Number of positions Number of contacts Contact Ø [mm] A,8 6 6(5+PE) 5+PE + 8(4++PE) 4++PE 1++ C-HC female contact Ø 1 mm A = D-SUB dimension C-HC female contact Ø mm 11 CONINVERS

Crimp contacts, turned Power connector - CONINVERS power M - P0 series The 6-pos. (5+PE) versions are equipped with Ø mm contacts. The 8-pos. (4++PE) versions are equipped with four Ø 1 mm signal contacts and four mm contacts (three power, 1 PE contact). Note: Depending on the wire used, the connection cross-sections (crimp ranges) can differ from the values mentioned below. SF-...0.. Crimp contacts socket SF-...00. Crimp contacts pin Description Connection cross section [mm / AWG] Contacts, socket Ø.0 mm for P0 cable and appliance plug connectors with knurled nuts, power and PE contacts 0,5... 1,0 / AWG 4-18 SF-7PS000 160566 100 0,75... 1,5 / AWG 18-16 SF-7NS000 160561 100 1.0....5 / AWG 18-14 SF-7QS000 160564 100 4,0 / AWG 1 SF-7MS000 160568 50 Wire spring contact, 0.75...5 / AWG 18-14 SF-0KS010 1605491 100 Contacts, socket Ø 1.0 mm for P0 cable and appliance plug connectors with knurled nuts, signal contacts 0,08... 0, / AWG 4-4 SF-6CS000 160556 100 0,14... 0,5 / AWG 6-0 SF-10KS004 160756 100 0,5... 1,0 / AWG 0-18 SF-6AS000 1605557 100 0,5... 1,0/1,5 / AWG 0-18 SF-6FS000 1605566 100 Wire spring contact, 0.14... 1,0 / AWG 6-18 SF-10KS010 1605481 100 Contacts, pin Ø.0 mm for P0 coupling connector, power and PE contacts 0,14... 0,5 / AWG 6-4 SF-7RP000 1605646 100 0,5... 1,0 / AWG 4-18 SF-7PP000 160564 100 0,75... 1,5 / AWG 18-16 SF-0KP004 160776 100 1.0....5 / AWG 18-14 SF-7QP000 160569 100 4,0 / AWG 1 SF-7MP000 160566 50 Contacts, pin Ø 1.0 mm for P0 coupling connector, signal contacts 0,08... 0, / AWG 4-4 SF-6CP000 1605559 100 0,14... 0,5 / AWG 6-0 SF-10KP004 160755 100 0,5... 1,0 / AWG 0-18 SF-6AP000 1605554 100 0,5... 1,0/1,5 / AWG 0-18 SF-6DP000 1607406 100 Contacts, pin Ø.0 mm for P0 appliance plug connector, power and PE contacts 0,14... 0,5 / AWG 6-4 SF-7RP000 1605646 100 0,5... 1,0 / AWG 4-18 SF-7PP000 160564 100 0,75... 1,5 / AWG 18-16 SF-0KP004 160776 100 1.0....5 / AWG 18-14 SF-7QP000 160569 100 4,0 / AWG 1 SF-7MP000 160566 50 Contacts, pin Ø 1.0 mm for P0 appliance plug connector, signal contacts 0,08... 0, / AWG 8-4 SF-6CP000 1605559 100 0,14... 0,5 / AWG 6-0 SF-10KP004 160755 100 0,5... 1,0 / AWG 0-18 SF-6AP000 1605554 100 0,5... 1,0/1,5 / AWG 0-18 SF-6DP000 1607406 100 Crimping tools Order separately, see page 147 onwards Crimping tool with digital display Order separately, see page 150 Note: Please pay attention to crimp ranges for cable plug connectors and coupling connectors. Contact diameter Number of positions Number of contacts Contact Ø [mm] 6(5+PE) 5+PE + 8(4++PE) 4++PE 1++ Short version: for connection cross sections of up to.5 mm² / AWG 14 and max. cable Ø 14 mm, shielded. Long version: for connection cross sections of up to 4.0 mm² / AWG 1 and max. cable Ø 18 mm, shielded. CONINVERS 11

Power connectors - CONINVERS power M40 - P70 series Mechanical and electrical data Mechanical data Housing material: Rotating part: copper-zinc alloy (CuZn), die-cast part: zinc (GD-Zn) Housing surface: Nickel-plated; appliance plug connector: nickel-plated/thick layer passivated (can be painted over) Insulating bodies: Polyamide (PA 66) Contact material: Copper-zinc alloy (CuZn) Contact surface: Nickel-plated (Ni) with a gold layer (Au) Contact connection method: Crimp version Gasket and O ring: Fluorine rubber (FKM) Ambient temperature: -0 C... 15 C Conductor entry: External cable diameter 9.0-6.5 mm, shielded Locking type: M40 x 1.5 screw locking / M40 SPEEDCON quick locking Mechanical insertion/withdrawal cycles: Standard: 50 Degree of protection: IP67 when locked Approval: An overview of the listed connectors as per UL, cul and VDE will be available on request. Electrical data Number of positions 6 (++PE) 8 (4++PE) Contacts + + PE 4 + + PE Contact Ø [mm],0,6,6,0,6,6 Stranded wire cross sections Short version, cable Ø max. 5.5 mm [mm /AWG] 0.14... 4.0/6-1 0.75... 10/18-8 0.75... 10/18-8 0.14... 4.0/6-1 0.75... 10/18-8 0.75... 10/18-8 Long version, cable Ø max. 6.5 mm [mm /AWG] 0.14... 4.0/6-1 0.75... 10/18-8 0.75... 10/18-8 0.14... 4.0/6-1 0.75... 10/18-8 0.75... 10/18-8 Appliance plug connectors [mm /AWG] 0.14... 4.0/6-1 0.75... 10/18-8 0.75... 10/18-8 0.14... 4.0/6-1 0.75... 10/18-8 0.75... 10/18-8 Nominal current per contact at 5 C 1) [A] 0 70 0 70 Specifications as per DIN EN 61984:001 Nominal/operating voltage [V AC / DC] 50 60 50 60 Test/surge voltage [kv] 4 6 4 6 Surge voltage category III III Pollution degree Installation height [m] Up to,000 Up to,000 1) If required, the effective current carrying capacity must be determined according to the application using a derating curve. Derating curve for x 10 mm based on DIN EN 6051-5- (cable plug connector mounted) Shield attenuation curve based on DIN EN 5089-1-6 SPEEDCON cable connector and appliance connector, angled on the base plate Current [A] 70 60 50 40 0 0 10 0 1 = x 10mm² 0 0 40 60 80 1 100 10 140 Attenuation [db] 10 100 80 60 40 0 0 0 100 1000 Ambient temperature [ C] Frequency [MHz] Note: Plug connectors may only be inserted or removed when the power supply is disconnected. 114 CONINVERS

Power connectors - CONINVERS power M40 - P70 series Connector pin assignments and coding Contact insert numbering (view of plug-in side) Number of positions Pin Socket 6-pos. ( + + PE) Crimp - W V + U + U V - W 6 * 6 * 8-pos. (4 + + PE) Crimp - + W V U 1 + - U V W 1 6 * 6 * * with grounding spring CONINVERS 115

Power connectors - CONINVERS power M40 - P70 series Selection guide M40 power connectors up to 70 A / 60 V, crimp ranges up to 10 mm / AWG 8 Cable plug connectors Coupling connectors Appliance plug connectors (device flange) Feed-throughs / panel feed-throughs The P70 connectors are fully assembled and the respective crimp contacts must be ordered separately. P70 connectors with a knurled nut are available with SPEEDCON quick locking or with the M40 x 1,5 control thread. The product chart provides an overview of the available components. shielded Connector type Cable plug connectors SPEEDCON quick locking, page 118 SM-..S1N8A8L..S Standard locking short/long, page 1 Mounting flange for wall mounting, page 148. Appliance plug connectors SPEEDCON quick locking, page 11 SM-..S1N8AY000S Standard locking, page 17 SM-..S1N8A8... SM-..S1N8AYW00 Coupling connectors short, page 1 long, page 119 SM-..P1N8A90.. SM-..P1N8A9L..S shielded with mounting flange short, long, page 14 with hexagonal flange short, long, page 15 SM-..P1N8AC0.., SM..P1N8ACL.. SM-..P1N8AQ0.., SM..P1N8AQL.. Appliance plug connectors angled rotatable, page 10 straight, page 10 angled fixed, page 10 SM-..PWN8AAD00S SM-..PWN8AWT00 SM-..PWN8AA00 shielded Panel feed-through pin inside - socket outside, Mounting flange: 4 x Ø 4., page 16 pin inside - socket outside, Mounting flange: 4 x M4, page 16 SM-..E1N8AS000 SM-..E1N8ASA00 Panel feed-throughs are delivered in a fully wired state 116 CONINVERS

Power connectors - CONINVERS power M40 - P70 series Crimp contacts Female contacts Turned, page 18 Tools / accessories Crimping tools Crimping pliers, page 148 Female contacts Crimping pliers with digital display for turned crimp contacts, page 150 Male contacts Male contacts Turned, page 18 Male contacts Note: For reasons pertaining to safety, only female contacts may be used in the live part of the connector. CONINVERS 117

Power connector - CONINVERS power M40 - P70 series Cable plug connector, socket, SPEEDCON quick locking P70 connectors with SPEEDCON quick locking are equipped with the same performance characteristics as the P70 connector with standard M40 locking. The very elegant shielding function is a special feature of the new cable plug connectors. Splicing the shield can be totally omitted in some cases, depending on the version of the braided shield. Overlaying braided shield is simply folded in. This simplifies handling and saves a lot of time especially in rigid wires and large connection cross-sections. Note: Connectors must be plugged in or unplugged only if the power supply is disconnected. SM-.ES1N8A8L.S Cable plug connector, SPEEDCON quick locking Description Cable seal Ø [mm] Cable plug connector P70, SPEEDCON, 6-pos. (++PE),shielded, straight, for a Ø 9.0 mm to 6.5 mm cable, connection cross section of up to 10 mm / AWG 8 9,0... 14,0 SM-5ES1N8A8LS 16148 1 14,0... 0,5 SM-5ES1N8A8LS 16149 1 0,5... 6,5 SM-5ES1N8A8L4S 16140 1 Cable plug connector P70, SPEEDCON, 8-pos. (4++PE), shielded, straight, for a Ø 9.0 mm to 6.5 mm cable, connection cross section of up to 10 mm / AWG 8 9,0... 14,0 SM-7ES1N8A8LS 16144 1 14,0... 0,5 SM-7ES1N8A8LS 16145 1 0,5... 6,5 SM-7ES1N8A8L4S 16146 1 Crimp contacts Order separately, see page 18 Signal contacts Ø mm Power and PE contacts Ø.6 mm min.105 Ø46 SM-.ES1N8A8L.S 118 CONINVERS

Power connector - CONINVERS power M40 - P70 series Coupling plug connector, pin A connector with SPEEDCON knurled nut as well as a connector with M40 standard locking thread can be screwed onto the new coupling plug connectors with segmented external thread. The coupling plug connectors are designed for connection cross-sections up to 10 mm /AWG 8 and conductor diameters of 9.0 mm to 6.5 mm. The housings provide a generously dimensioned cable storage space. A special feature of the new coupling plug connectors is the very elegant shield function, which can be executed without a lot of force. Splicing the shield can be totally omitted in some cases, depending on the version of the braided shield. Overlaying braided shield is simply folded in. This simplifies handling and saves a lot of time especially in solid wires and large connection cross-sections. SM-.EP1N8A9L.S Coupling plug connector SPEEDCON/standard interlocking Description Cable seal Ø [mm] Coupling plug connector P70, 6-pos. (++PE),shielded, straight, for a Ø 9.0 mm to 6.5 mm cable, connection cross section of up to 10 mm / AWG 8 9,0... 14,0 SM-5EP1N8A9LS 16145 1 14,0... 0,5 SM-5EP1N8A9LS 16146 1 0,5... 6,5 SM-5EP1N8A9L4S 16147 1 Coupling plug connector P70, 8-pos. (4++PE), shielded, straight,for a Ø 9.0 mm to 6.5 mm cable, connection cross section of up to 10 mm / AWG 8 9,0... 14,0 SM-7EP1N8A9LS 16141 1 14,0... 0,5 SM-7EP1N8A9LS 1614 1 0,5... 6,5 SM-7EP1N8A9L4S 1614 1 Crimp contacts Order separately, see page 18 Signal contacts Ø mm Power and PE contacts Ø.6 mm min.119 M40x1,5 SPEEDCON SM-.EP1N8A9L.S CONINVERS 119

Power connector - CONINVERS power M40 - P70 series Appliance plug connector, pin (compatible to SPEEDCON and standard interlocking) A SPEEDCON cable plug connector as well as a cable connector with standard locking thread can be screwed onto the appliance plug connector with segmented external thread. The rotatable angular housing can be rotated progressively in the range of 10. SM-.EPWN8AAD00S SM-.EPWN8A..00 Appliance plug connector, angled rotatable, with SPEEDCON/standard interlocking Appliance plug connector, fixed, with SPEEDCON/standard interlocking Description No. of pos. Appliance plug connector P70, angled, rotatable, connection cross section... 10 mm / AWG 8 6-position (++PE) SM-5EPWN8AAD00S 160797 6 Appliance plug connector P70, angled, rotatable, connection cross section... 10 mm / AWG 8 8-position (4++PE) SM-7EPWN8AAD00S 160791 6 Appliance plug connector P70, angled, fixed, connection cross section... 10 mm / AWG 8 6-position (++PE) SM-5EPWN8AA00 161516 6 Appliance plug connector P70, angled, fixed, connection cross section... 10 mm / AWG 8 8-position (4++PE) SM-7EPWN8AA00 16156 6 Appliance plug connector P70, straight, connection cross section... 10 mm / AWG 8 6-position (++PE) SM-5EPWN8AWT00 161517 1 Appliance plug connector P70, straight, connection cross section... 10 mm / AWG 8 8-position (4++PE) SM-7EPWN8AWT00 16157 1 Crimp contacts Order separately, see page 18 Order separately, see page 18 Signal contacts Ø mm Power and PE contacts Ø.6 mm 40 M40x1,5 SPEEDCON 00 110 0, M40x1,5 SPEEDCON 71 6, 0±0,1 Ø 4x4,4 Ø 4x4, 4xØ4, 4,1± 0,4 4,5 0 40 5 0 40 ر0,1 SM-.EPWN8AAD00S SM-.EPWN8AA00 Installation dimensions:sm-.epwn8aa00 0±0,1 40 0±0,1 Ø 4x4, 0 5,7 Kantenabtrag max. 0, ر0,1 4xØ4,4 M40x1,5 SPEEDCON ر0,1 4xØ4, 10 CONINVERS Installation dimensions: SM-.EPWN8AAD00S SM-.EPWN8AWT00 Installation dimensions:sm-.epwn8awt00

Appliance plug connectors with SPEEDCON knurl, socket, straight and angled fixed P70 appliance plug connectors with knurled nut make control cabinets and system parts "pluggable". The connectors are available in straight version and with -section angular housing. Note: Appliance plug connectors with knurled nuts must be equipped with female contacts. SM-.ES1N8AY000S Appliance plug connector, straight, with SPEEDCON knurled nut Power connector - CONINVERS power M40 - P70 series SM-.ES1N8AYW00S Appliance plug connector, angled fixed, with SPEEDCON knurled nut Description No. of pos. Appliance plug connector P70, with SPEEDCON knurled nut, straight, connection cross section... 10 mm / AWG 8 6-position (++PE) SM-5ES1N8AY000S 16154 1 8-position (4++PE) SM-7ES1N8AY000S 16154 1 Appliance plug connector P70, with SPEEDCON knurled nut, angled, connection cross section... 10 mm / AWG 8 6-position (++PE) SM-5ES1N8AYW00S 16155 6 8-position (4++PE) SM-7ES1N8AYW00S 16155 6 Crimp contacts Order separately, see page 18 Order separately, see page 18 Signal contacts Ø mm Power and PE contacts Ø.6 mm Notes: The appliance plug connectors with a SPEEDCON knurled nut can only be screwed onto mating connectors with a segmented thread. Appliance plug connectors with a knurled nut must be equipped with female contacts. 0±0,1 4xØ4, Ø46 ر0,1 Installation dimensions 84 74,5 40 0 Ø 46 Ø 4x4, Ø 4x4, 0, 5 0 40 SM-.ES1N8AY000S SM-.ES1N8AYW00S CONINVERS 11

Power connector - CONINVERS power M40 - P70 series Cable plug connector, socket, standard interlocking The P70 cable plug connectors with standard M40 locking threads are available in two housing lengths depending on the required cable storage space. SM-.ES1N8A8... Cable plug connector in short and long versions Description Cable seal Ø [mm] Cable plug connector P70, 6-pos. (++PE), shielded, straight, short, for a Ø 9.0 mm to 5.5 mm cable, connection cross section of up to 10 mm / AWG 8 9,0... 1,5 SM-5ES1N8A800 160580 1 1,5... 17,0 SM-5ES1N8A800 1605805 1 17,0... 1,0 SM-5ES1N8A8004 1605807 1 1,0... 5,5 SM-5ES1N8A8005 1605809 1 Cable plug connector P70, 6-pos. (++PE), shielded, straight, long, for a Ø 9.0 mm to 6.5 mm cable, connection cross section of up to 10 mm / AWG 8 9,0... 14,0 SM-5ES1N8A8S 161518 1 14,0... 0,5 SM-5ES1N8A8S 161519 1 0,5... 6,5 SM-5ES1N8A8S4 16150 1 Cable plug connector P70, 8-pos. (4++PE), shielded, straight, short, for a Ø 9.0 mm to 5.5 mm cable, connection cross section of up to 10 mm / AWG 8 9,0... 1,5 SM-7ES1N8A800 1605851 1 1,5... 17,0 SM-7ES1N8A800 160585 1 17,0... 1,0 SM-7ES1N8A8004 1605854 1 1,0... 5,5 SM-7ES1N8A8005 1605856 1 Cable plug connector P70, 8-pos. (4++PE), shielded, straight, long, for a Ø 9.0 mm to 6.5 mm cable, connection cross section of up to 10 mm / AWG 8 9,0... 14,0 SM-7ES1N8A8S 16158 1 14,0... 0,5 SM-7ES1N8A8S 16159 1 0,5... 6,5 SM-7ES1N8A8S4 16150 1 Crimp contacts Order separately, see page 18 Signal contacts Ø mm Power and PE contacts Ø.6 mm 9,6 41 41 min.105, Ø 46 Ø 46 SM-.ES1N8A80.. SM-.ES1N8A8S.. 1 CONINVERS

Power connector - CONINVERS power M40 - P70 series Coupling plug connector, pin, standard interlocking The P70 coupling plug connectors with standard locking threads have a short housing for space-saving installation. SM-.EP1N8A900. Coupling plug connector, short version Description Cable seal Ø [mm] Coupling plug connector P70, 6-pos. (++PE), shielded, straight, short, for a Ø 9.0 mm to 5.5 mm cable, connection cross section of up to 10 mm / AWG 8 9,0... 1,5 SM-5EP1N8A900 1605769 1 1,5... 17,0 SM-5EP1N8A900 1605771 1 17,0... 1,0 SM-5EP1N8A9004 160577 1 1,0... 5,5 SM-5EP1N8A9005 1605775 1 Coupling plug connector P70, 8-pos. (4++PE), shielded, straight, short, for a Ø 9.0 mm to 5.5 mm cable, connection cross section of up to 10 mm / AWG 8 9,0... 1,5 SM-7EP1N8A900 160706 1 1,5... 17,0 SM-7EP1N8A900 160586 1 17,0... 1,0 SM-7EP1N8A9004 1607064 1 1,0... 5,5 SM-7EP1N8A9005 1607065 1 Crimp contacts Order separately, see page 18 Signal contacts Ø mm Power and PE contacts Ø.6 mm 107,5 41 41 M40x1,5 SM-.EP1N8A900. CONINVERS 1

Power connector - CONINVERS power M40 - P70 series Panel feed-through, square flange, pin, standard interlocking The P70 range provides the suitable power panel feed-throughs for cabling machines, systems and control cabinets. SM-.EP1N8AC.0. Panel feed-through with 50 mm mounting flange, Inside panel mounting Description Cable seal Ø [mm] Panel feed-through P70, 6-pos. (++PE), inside, short, square flange, for a Ø 9.0 mm to 5.5 mm cable, connection cross section of up to 10 mm / AWG 8 9,0... 1,5 SM-5EP1N8AC00 160578 6 1,5... 17,0 SM-5EP1N8AC00 160578 6 17,0... 1,0 SM-5EP1N8AC004 1605784 6 1,0... 5,5 SM-5EP1N8AC005 1605785 6 Panel feed-through P70, 6-pos. (++PE), inside, long, square flange, for a Ø 9.0 mm to 5.5 mm cable, connection cross section of up to 10 mm / AWG 8 9,0... 1,5 SM-5EP1N8ACL0 1605786 6 1,5... 17,0 SM-5EP1N8ACL0 1605787 6 17,0... 1,0 SM-5EP1N8ACL04 1605788 6 1,0... 5,5 SM-5EP1N8ACL05 1605789 6 Panel feed-through P70, 8-pos. (4++PE), inside, short, square flange, for a Ø 9.0 mm to 5.5 mm cable, connection cross section of up to 10 mm / AWG 8 9,0... 1,5 SM-7EP1N8AC00 160580 6 1,5... 17,0 SM-7EP1N8AC00 160581 6 17,0... 1,0 SM-7EP1N8AC004 16058 6 1,0... 5,5 SM-7EP1N8AC005 16058 6 Panel feed-through P70, 8-pos. (4++PE), inside, long, square flange, for a Ø 9.0 mm to 5.5 mm cable, connection cross section of up to 10 mm / AWG 8 9,0... 1,5 SM-7EP1N8ACL0 160584 6 1,5... 17,0 SM-7EP1N8ACL0 160585 6 17,0... 1,0 SM-7EP1N8ACL04 160586 6 1,0... 5,5 SM-7EP1N8ACL05 160587 6 Crimp contacts Order separately, see page 18 Signal contacts Ø mm Power and PE contacts Ø.6 mm 107,5 50 41 41 119,1 50 41 41 50 7 Ø4,5±0, 7±0,1 M40x1,5 M40x1,5 4xØ4, 4xM4 SM-.EP1N8AC00. SM-.EP1N8ACL0. Installation dimensions 14 CONINVERS

Power connector - CONINVERS power M40 - P70 series Panel feed-through, hexagonal flange, pin, standard interlocking The P70 panel feed-throughs are available in two housing lengths for the cable-side adjustment. The long version offers more cable storage space and the short version provides smaller dimensions. SM-.EP1N8AQ.0. Panel feed-through with hexagonal flange, Inside panel mounting Description Cable seal Ø [mm] Panel feed-through P70, 6-pos. (++PE), inside, short, hexagonal flange, for a Ø 9.0 mm to 5.5 mm cable, connection cross section of up to 10 mm / AWG 8 9,0... 1,5 SM-5EP1N8AQ00 1605790 6 1,5... 17,0 SM-5EP1N8AQ00 1605791 6 17,0... 1,0 SM-5EP1N8AQ004 160579 6 1,0... 5,5 SM-5EP1N8AQ005 160579 6 Panel feed-through P70, 6-pos. (++PE), inside, long, hexagonal flange, for a Ø 9.0 mm to 5.5 mm cable, connection cross section of up to 10 mm / AWG 8 9,0... 1,5 SM-5EP1N8AQL0 1605794 6 1,5... 17,0 SM-5EP1N8AQL0 1605795 6 17,0... 1,0 SM-5EP1N8AQL04 1605796 6 1,0... 5,5 SM-5EP1N8AQL05 1605797 6 Panel feed-through P70, 8-pos. (4++PE), inside, short, hexagonal flange, for a Ø 9.0 mm to 5.5 mm cable, connection cross section of up to 10 mm / AWG 8 9,0... 1,5 SM-7EP1N8AQ00 160588 6 1,5... 17,0 SM-7EP1N8AQ00 160589 6 17,0... 1,0 SM-7EP1N8AQ004 1605840 6 1,0... 5,5 SM-7EP1N8AQ005 1605841 6 Panel feed-through P70, 8-pos. (4++PE), inside, long, hexagonal flange, for a Ø 9.0 mm to 5.5 mm cable, connection cross section of up to 10 mm / AWG 8 9,0... 1,5 SM-7EP1N8AQL0 160584 6 1,5... 17,0 SM-7EP1N8AQL0 160584 6 17,0... 1,0 SM-7EP1N8AQL04 1605844 6 1,0... 5,5 SM-7EP1N8AQL05 1605845 6 Crimp contacts Order separately, see page 18 Signal contacts Ø mm Power and PE contacts Ø.6 mm 107,5 119 50 50 41 41 50 50 41 41 Ø44,+0, M40x1,5 M40x1,5 max.7,5 max.7,5 SM-.EP1N8AQ00. SM-.EP1N8AQL0. Installation dimensions CONINVERS 15

Power connector - CONINVERS power M40 - P70 series Panel feed-through, internal pin and external socket, standard interlocking Panel feed-throughs are completely mounted, equipped with contacts and internally wired when supplied. SM-.EE1N8AS.00 Panel feed-through Description No. of pos. Panel feed-through P70, outside, pin inside - socket outside, completely wired, mounting flange with 4 x Ø 4. mm 6-position (++PE) SM-5EE1N8AS000 1605767 1 8-position (4++PE) SM-7EE1N8AS000 160584 1 Panel feed-through P70, outside, pin inside - socket outside, completely wired, mounting flange with 4 x M4 6-position (++PE) SM-5EE1N8ASA00 1605768 1 8-position (4++PE) SM-7EE1N8ASA00 160585 1 60,7 6,7 Ø 65 56 Ø 4x4, 4xM4 56±0,1 Ø46,+0, 4xØ4, M40x1,5 Ø 46 SM-.EE1N8AS000, SM-.EE1N8ASA00 Installation dimensions 16 CONINVERS

Power connector - CONINVERS power M40 - P70 series Appliance plug connector with knurls, standard interlocking, socket, straight and angled fixed P70 appliance plug connectors with knurled nut make control cabinets and system parts "pluggable". The connectors are available in straight version and with -section angular housing. Note: Appliance plug connectors with knurled nuts must be equipped with female contacts. SM-.ES1N8AY.00 Appliance plug connector with knurled nut, Outside panel assembly Description No. of pos. Appliance plug connector P70, with knurled nut, straight, outside, connection cross section... 10 mm / AWG 8 6-position (++PE) SM-5ES1N8AY000 16058 1 8-position (4++PE) SM-7ES1N8AY000 1605865 1 Appliance plug connector P70, with knurled nut, angled fixed, outside, connection cross section... 10 mm / AWG 8 6-position (++PE) SM-5ES1N8AYW00 16075 6 8-position (4++PE) SM-7ES1N8AYW00 160754 6 Crimp contacts Order separately, see page 18 Signal contacts Ø mm Power and PE contacts Ø.6 mm Ø46 8, 74,7 40 0 0±0,1 Ø 46 4x4, 4x4, 4xØ4, Ø Ø 0 5 ر0,1 40 0, SM-.ES1N8AY000 SM-.ES1N8AYW00 Installation dimensions: SM-.ES1N8AY000,SM-.ES1N8AYW00 CONINVERS 17

Power connector - CONINVERS power M40 - P70 series Crimp contacts, turned The 6-pos. (++PE) versions are equipped with two Ø mm signal contacts and four.6 mm contacts (three power, 1 PE contact). The 8-pos. (4++PE) versions are equipped with four mm signal contacts and four.6 mm contacts (three power, 1 PE contact). Note: Depending on the wire used, the connection cross-sections (crimp ranges) can differ from the values mentioned below. S.-...00. Crimp contacts socket S.-...00. Crimp contacts pin Description Connection cross section [mm / AWG] Contacts, socket Ø.6 mm, for P70 cable and appliance plug connectors with knurled nuts, power and PE contacts 1.0....5 / AWG 18-14 SM-6KS001 1605756 50.5... 4.0 / AWG 14-1 SM-6KS00 1605758 50 4,0... 6,0 / AWG 1-10 SM-6KS00 1605760 50 6,0... 10,0 / AWG 10-8 SM-6KS004 160576 50 Contact socket Ø.0 mm for P70 cable and appliance plug connectors with knurled nuts, signal contacts 0,5... 1,0 / AWG 4-18 SF-7PS000 160566 100 0,75... 1,5 / AWG 18-16 SF-7NS000 160561 100 1.0....5 / AWG 18-14 SF-7QS000 160564 100 4,0 / AWG 1 SF-7MS000 160568 50 Contacts, pin Ø.6 mm, for P70 coupling plug connector, power and PE contacts 1.0....5 / AWG 18-14 SM-6KP005 1605749 50.5... 4.0 / AWG 14-1 SM-6KP006 1605750 50 4,0... 6,0 / AWG 1-10 SM-6KP008 1605754 50 6,0... 10,0 / AWG 10-8 SM-6KP007 160575 50 Contacts, pin Ø.0 mm, for P70 coupling plug connector, signal contacts 0,5... 1, / AWG 4-18 SM-0KP006 160578 50 0,75... 1,5 / AWG 18-16 SM-0KP005 160576 50 1.0....5 / AWG 18-14 SM-0KP007 160579 50 4,0 / AWG 1 SM-0KP008 1605741 50 Contacts, pin Ø.6 mm for P70 appliance plug connector, power and PE contacts 0,75... 1,5 / AWG 18-16 SM-6KP001 160574 50 1.0....5 / AWG 18-14 SM-6KP009 1607057 50 1,0... 4,0 / AWG 18-1 SM-6KP00 1605744 50 4,0... 6,0 / AWG 1-10 SM-6KP00 1605745 50 6,0... 10,0 / AWG 10-8 SM-6KP004 1605747 50 Contact pin Ø.0 mm, for P70 appliance plug connector, signal contacts 0,14... 0,5 / AWG 6-4 SF-7RP000 1605646 100 0,5... 1,0 / AWG 4-18 SF-7PP000 160564 100 0,75... 1,5 / AWG 18-16 SF-0KP004 160776 100 1.0....5 / AWG 18-14 SF-7QP000 160569 100 4,0 / AWG 1 SF-7MP000 160566 50 Crimping tools Order separately, see page 148 onwards Order separately, see page 148 onwards Crimping tool with digital display Order separately, see page 150 Order separately, see page 150 Number of positions Number of contacts Contact Ø [mm] 6(++PE) ++PE +,6+,6 8(4++PE) 4++PE +,6+,6 18 CONINVERS

Power connector - CONINVERS power M40 - P70 series CONINVERS 19

Power connectors - CONINVERS power M58 - P150 series Mechanical and electrical data Mechanical data Housing material: Housing surface: Insulating bodies: Contact surface: Contact connection method: Gasket and O ring: Rotating part, aluminum Aluminum, anodized Polyamide (PA66) Power and PE contacts: silver-plated (Ag), signal contacts: gold-plated (Au) Crimp version Fluorine rubber (FPM) Ambient temperature: -0 C... 10 C Conductor entry: Locking type: Mechanical insertion/withdrawal cycles: Degree of protection: Cable plug connectors and coupling connectors for external cable diameters of 17... 6 mm, shielded M58 x screw locking standard: 50, 500 on request IP67 when locked Electrical data Number of positions 6 (++PE) 8 (4++PE) Contacts + + PE 4 + + PE Contact Ø [mm] 1.6 10 10 1.6 10 10 Stranded wire cross section Crimp contacts turned [mm /AWG] 0.75... 1.5/18-16 10... 50/8-1 10... 50/8-1 0.75... 1.5/18-16 10... 50/8-1 10... 50/8-1 Cable clamping range max Ø [mm] 6 6 Nominal current per contact at 5 C 1) [A] 1 150 1 150 Specifications as per DIN EN 61984:001 Nominal/operating voltage [V AC / DC] 50 60 50 60 Test/surge voltage [kv] 4 6 4 6 Surge voltage category III III Pollution degree Installation height [m] Up to,000 Up to,000 1) If required, the effective current carrying capacity must be determined according to the application using a derating curve. Derating curve for x 50 mm based on DIN EN 6051-5- (cable plug connector mounted) Current [A] 180 160 140 10 100 80 60 40 1 0 1 = x 50mm² 0 0 0 40 60 80 100 10 Ambient temperature [ C] Note: Plug connectors may only be inserted or removed when the power supply is disconnected. 10 CONINVERS

Power connectors - CONINVERS power M58 - P150 series Connector pin assignments and coding Contact insert numbering (view of plug-in side) Number of positions Pin Socket V - + V + - 6-pos. ( + + PE) Crimp W U U W 6 * 6 * V - + V + - 8-pos. (4 + + PE) Crimp W U U W 1 6 * 1 6 * * with grounding spring, PE leading CONINVERS 11

Power connectors - CONINVERS power M58 - P150 series Selection guide M58 power connectors up to 150 A / 60 V, crimp ranges of up to 50 mm / AWG 1 Cable plug connectors Coupling connectors Appliance plug connectors, straight The P150 connectors are fully assembled and the respective crimp contacts must be ordered separately. Connector type Cable plug connectors The product chart provides an overview of the available components. shielded SL-..S1N8A80.. page 14 Coupling connectors shielded shielded SL-..P1N8A90.. page 15 Appliance plug connectors SL-..PWN8AWA00 page 16 1 CONINVERS

Power connectors - CONINVERS power M58 - P150 series Crimp contacts Female contacts Turned, page 17 Tools / accessories Crimping tools Crimp device for power and PE contacts Ø 10 mm, page 149 Female contacts Crimping pliers for signal contacts Ø 1.6 mm, page 149 Male contacts Male contacts Turned, page 17 Male contacts Note: For reasons pertaining to safety, only female contacts may be used in the live part of the connector. CONINVERS 1

Power connector - CONINVERS power M58 - P150 series Cable plug connector P150 are 6/8 pos. power connectors for very high transmission capacities and connection cross-sections. Electrical power up to 60 V and 150 A in connection crosssections up to 50 mm /AWG 1 can be transmitted. The cable clamping range is specified for cable diameters from 17 mm to 6 mm. The very elegant and quick shielding function is a special feature. Splicing the shield can be totally omitted in some cases, depending on the version of the cable or braided shield. This is a big time saving especially in solid wires and large conductors. The wire stop is supported by mechanically or pneumatically operated crimping pliers. Note: The cable plug connectors must be equipped with female contacts. Connectors must be plugged in or unplugged only if the power supply is disconnected. Description Cable seal Ø [mm] Cable plug connector P150, 6-pos. (++PE),shielded, straight, for a Ø 17.0 mm to 6 mm cable, connection cross section of up to 50 mm / AWG 1 17... 5 SL-5ES1N8A800 160750 1 5... 6 SL-5ES1N8A8001 1607501 1 Cable plug connector P150, 8-pos. (4++PE),shielded, straight, for a Ø 17.0 mm to 6 mm cable, connection cross section of up to 50 mm / AWG 1 17... 5 SL-7ES1N8A800 1607508 1 5... 6 SL-7ES1N8A8001 1607507 1 Crimp contacts, female Order separately, see page 17 Signal contacts Ø 1.6 mm Power and PE contacts Ø 10 mm SL-.ES1N8A800. Cable plug connector 14 55 55 Ø 65 SL-.ES1N8A800. 14 CONINVERS

Power connector - CONINVERS power M58 - P150 series Coupling plug connector Note: The coupling and appliance plug connectors must be equipped with male contacts. SL-.EP1N8A900. Coupling plug connector Description Cable seal Ø [mm] Coupling plug connector P150, 6-pos. (++PE), shielded, straight, for a Ø 17 mm... 6 mm cable, connection cross section of up to 50 mm / AWG 1 17... 5 SL-5EP1N8A900 1607500 1 5... 6 SL-5EP1N8A9001 1607499 1 Coupling plug connector P150, 8-pos. (4++PE), shielded, straight, for a Ø 17 mm... 6 mm cable, connection cross section of up to 50 mm / AWG 1 17... 5 SL-7EP1N8A900 1607506 1 5... 6 SL-7EP1N8A9001 1607505 1 Crimp contacts, male Order separately, see page 17 Signal contacts Ø 1.6 mm Power and PE contacts Ø 10 mm 164,5 55 55 M58x SL-.EP1N8A900. CONINVERS 15

Power connector - CONINVERS power M58 - P150 series Appliance plug connector for front mounting Note: The coupling and appliance plug connectors must be equipped with male contacts. SL-.EPWN8AWA00 Appliance plug connector for front mounting Description Connection cross section [mm / AWG] Appliance plug connector P150, 6-pos. (++PE), front mounting, straight Up to 50 / AWG 1 SL-5EPWN8AWA00 1615686 1 Appliance plug connector P150, 8-pos. (4++PE), front mounting, straight Up to 50 / AWG 1 SL-7EPWN8AWA00 1615687 1 Crimp contacts Order separately, see page 17 Signal contacts Ø 1.6 mm Power and PE contacts Ø 10 mm 45,±0,1 Ø8,7 Ø48 4xM5 60 45, 100 7 Ø 4x5,4 M58x Installation dimensions (wire Ø max. 14 mm) SL-.EPWN8AWA00 16 CONINVERS

Power connector - CONINVERS power M58 - P150 series Crimp contacts, turned The 6-pos. (++PE) versions require with two Ø 1.6 mm signal contacts and four 10 mm contacts (three power, 1 PE contact). The 8-pos. (4++PE) versions require with four 1.6 mm signal contacts and four 10 mm contacts (three power, 1 PE contact). Note: Depending on the wire used, the connection cross-sections (crimp ranges) can differ from the values mentioned below. SL-1.KS0.0 Crimp contact socket for cable plug connector SL-1.KP0.0 Crimp contact pin for coupling and appliance plug connector Description Connection cross section [mm / AWG] Contact socket Ø 10.0 mm for P150 cable plug connector, power and PE contacts 10,0 / AWG 8 SL-1CKS010 1607916 10 16,0 / AWG 6 SL-1CKS00 1607917 10 5,0 / AWG 4 SL-1CKS00 1607918 5 5,0 / AWG SL-1CKS040 1607919 5 50,0 / AWG 1 SL-1CKS050 160790 5 Contact socket Ø 1.6 mm for P150 cable plug connector, signal contacts 0,75... 1,5 / AWG 18-16 SL-16KS010 1607956 10 Contact pin Ø 10.0 mm for P150 coupling and appliance plug connector, power and PE contacts 10,0 / AWG 8 SL-1CKP010 1607911 10 16,0 / AWG 6 SL-1CKP00 160791 10 5,0 / AWG 4 SL-1CKP00 160791 5 5,0 / AWG SL-1CKP040 1607914 5 50,0 / AWG 1 SL-1CKP050 1607915 5 Contact pin Ø 1.6 mm for P150 coupling and appliance plug connector, signal contacts 0,75... 1,5 SL-16KP010 1607909 10 Crimping tools Order separately, see page 149 onwards Order separately, see page 149 onwards Number of positions Number of contacts Contact Ø [mm] 6(++PE) ++PE 1,6+10+10 8(4++PE) 4++PE 1,6+10+10 CONINVERS 17

18 CONINVERS

Tools and accessories Crimping and assembly tools are available for easy and quick assembly of circular connectors. Accessories such as caps with IP40 and IP67 degree of protection are available for special applications. There are different tools for processing crimp contacts. In addition to manual crimping pliers, pneumatically supported tools simplify the contact connection, particularly in the case of larger cross sections. Punched-rolled C-HC contacts in taped versions can be crimped manually or with conventional automatic devices in an efficient manner. Accessories such as square flanges for wall mounting of cable plug connectors and coupling connectors extend the product range of circular connectors easily and costeffectively. Table of contents Crimping tools For rolled and turned contacts - RC series 140 For punched-rolled contacts - RF, P0, P0 series 144 For turned contacts - P0 and ST series 145 For turned contacts - RF series 146 For turned contacts - P0 series 147 For turned contacts - P70 series 148 For turned contacts - P150 series 149 With digital display for turned contacts 150 Crimping machine for turned contacts 151 Other tools and accessories Assembly tools - RC, UC, TU, HC series 140 Cable gaskets, double bracket strain reliefs - UC series 14 Removal tool for contact carriers and square mounting flange P0, RF, P0, P70, P150 series 15 Special screw key P0, RF, P0, P70, P150 series 15 Dust protection caps 154 CONINVERS 19

Tools and accessories For signal plug connectors and power connectors Tools and accessories for the RC, UC, TU, HC series For RC crimp contacts, the crimping pliers RC-Z10 and RC-Z504 are used for rolled or turned contacts. The crimping pliers RC-Z504 with 4-arbor pressing is suitable for crimping turned RC contacts. Detailed operating instructions are enclosed with the packing. RC-Z... RC-Z... Crimping tools for rolled / turned contacts Contact insertion/contact removal tool Description Crimping pliers for rolled RC crimp contacts Ø 1 mm Stranded wire cross-section 0.08... 0.56 mm / AWG 8-0 RC-Z10 160467 1 Crimping pliers for turned RC crimp contacts Ø 1 mm / Ø 1.5 mm / Ø mm Stranded wire cross-section 0.14....5 mm / AWG 6-14 RC-Z504 1618 1 Insertion and contact removal tool for RC crimp contacts Female / male Ø 1 mm RC-Z494 16141 1 Female / male Ø 1.5 mm RC-Z74 1604409 1 Female / male Ø mm RC-Z490 161180 1 140 CONINVERS

Tools and accessories For signal plug connectors and power connectors Tools and accessories for the RC, UC, TU, HC series The pipe spanner is used together with a wrench to screw the inner sleeve to the adapter cap in the cable and coupling plug connectors. RC-Z09. RC-... Pipe spanner for cable and coupling plug connectors Latching ring contact removal tool for appliance plug connector housing Description Pipe spanner For cable plug connectors - RC, UC, TU series RC-Z099 160455 10 For coupling plug connectors - RC, UC, TU series RC-Z096 160449 10 Contact removal tool for latching rings in appliance plug connector housings For RC, TU series RC-Z90 1604417 1 Spare plastic latching ring for appliance plug connector housing For RC, TU series RC-Z8 160444 10 Spacer sleeve for cable and coupling plug connector in connection with 19-pos. (16++PE) crimp contact insert For series RC, UC, TU RC-E0146 160961 50 CONINVERS 141

Tools and accessories For signal plug connectors and power connectors Cable gaskets, double bracket strain reliefs for the UC series In addition to the universal notched sealing rings included in the scope of supply, fixed gaskets are also available for the cable connector and coupling housings of the M UC series. These are available to suit the respective cable diameter. Housings with additional thread can be equipped with another cable strain relief for exceptional loads. UC-Z.. Notched sealing rings, fixed gaskets.c-z0. Double bracket strain relief for connectors with additional thread Description Cable Ø D [mm] Notched sealing ring Fixed gasket Double bracket strain relief.0-14.5 UC-Z51 1606846 0 7,0-8,5 UC-Z4 16199 0 8,0-9,5 UC-Z44 160687 0 9,5-11,5 UC-Z46 160689 0 11,5-1,5 UC-Z48 1606841 0 1,5-14,5 UC-Z49 160684 0 Cable entry Pg 1.5 RC-Z06 160406 0 Cable entry Pg 16 UC-Z09 160684 0 14 CONINVERS

Tools and accessories For signal plug connectors and power connectors Cable gland for P0 series The P0 cable and coupling plug connectors with additional thread M0 x 1.5 can be equipped with an IP68 cable gland for exceptional loads. RC-Z417 Cable glands with metric thread Description Additional thread / cable Ø [mm] Cable gland IP68, for P0 power connectors with M0 x 1.5 additional thread M0 x 1,5 / 9... 1 RC-Z417 1607019 0 CONINVERS 14

Tools and accessories For signal plug connectors and power connectors Crimping tools for punched-rolled crimp contacts P0, RF, P0 The punched-rolled C-HC crimp contacts can be crimped quickly and efficiently, manually or automatically. The manual crimping pliers are suitable for individual processing. An electric table crimping device with integrated feed mechanics is available for processing taped products. The tool heads are adapted to the respective contacts and connection crosssections. SF-Z00.. Hand crimping tools for punched-rolled C-HC crimp contacts SF-Z00.. Electrical crimp device for punched-rolled C-HC crimp contacts Description Hand crimping pliers, basic tool for individual processing for C-HC crimp contacts SF-Z009 1607458 1 Tool head for crimping pliers SF-Z009, for C-HC crimp contacts Contacts Ø mm SF-Z000 1607459 1 Contacts Ø 1 mm SF-Z001 1607461 1 Electrical crimp device for C-HC crimp contacts SF-Z00 160746 1 Tool head for electrical crimp device SF-Z00, for C-HC crimp contacts, processing for taped articles Contacts Ø.0 mm / connection 1.0 mm /AWG 18 SF-Z00 160746 1 Contacts Ø.0 mm / connection 1.5 mm /AWG 16 SF-Z0047 1614689 1 Contacts Ø.0 mm / connection.5 mm /AWG 14 SF-Z005 1607465 1 Contacts Ø 1.0 mm / connection 0.08... 0. mm /AWG 8-4 SF-Z009 1607470 1 Contacts Ø 1.0 mm / connection 0.... 0.56 mm /AWG 4-0 SF-Z0040 1607471 1 Media hub for elec. crimping device SF-Z00 for accommodating rolls up to Ø 60 cm Adapter for electrical crimp device SF-Z00, for accommodating tool heads for single processing SF-Z005 161541 1 SF-Z0041 160747 1 Notes: The SF-Z0041 adapter allows the use of manual crimping pliers for individual processing with the electrical crimp device. Stranded wire stripping lengths for punched-rolled C-HC crimp contacts Connection cross-section [mm²] Wire stripping length [mm] Socket Ø 1 mm 0,08...,5 0,... 0,56,5 Socket Ø mm, 1,0...,5 5 The required settings of the crimping pliers and stripping lengths can deviate from the specified values, depending on the wire used. 144 CONINVERS

Tools and accessories For signal plug connectors and power connectors Crimping tools for turned contacts of the P0 and ST series Manually or pneumatically supported crimping pliers are used for turned crimp contacts of the P0 series connectors. The crimping pliers are suitable for crimping turned contacts Ø 0.6 mm, Ø 1 mm and Ø mm. Four-arbor crimping pliers with digital display are available as an alternative to the manual crimping pliers with positioner and eccentric setting, see page 150. SF-Z00... Crimp tools, for turned contacts SF-Z00.. Crimp head and positioners for crimping pliers Description Stranded wire cross section [mm² / AWG] Crimping tool, pneumatic, for turned crimp contacts Ø 1 mm / Ø mm 0,14... 6 / AWG 6-10 SF-Z00 1607450 1 Crimping pliers for turned crimp contacts Ø 1 mm / Ø mm 0,14... 6 / AWG 6-10 SF-Z0008 1605668 1 Crimping pliers for turned crimp contacts Ø 1 mm / Ø 0.6 mm 0,08... 0,5 / AWG 8-4/ // 0,5 / AWG 0 SF-Z0007 1605665 1 Crimp head for crimping pliers SF-Z00, SF-Z0008 Crimp head for crimping plierssf-z0007 Positioners for crimp head SF-Z000, contacts Ø 1 mm, Ø mm SF-Z000 1605657 1 SF-Z0004 1605661 1 "G" marking ST-Z0011 160799 1 Positioners for crimp head SF-Z0004, contacts Ø 1.0 mm "C" marking SF-Z000 1605655 1 Positioners for crimp head SF-Z0004, contacts Ø 0.6 mm "H" marking ST-Z0010 160798 1 CONINVERS 145

Tools and accessories For signal plug connectors and power connectors Crimping tools for turned contacts, RF series Manually or pneumatically supported crimping pliers are used for turned crimp contacts for the RF series connectors. The crimping pliers are suitable for crimping turned contacts Ø 1 mm. Four-arbor crimping pliers with digital display are available as an alternative to the manual crimping pliers with positioner and eccentric setting, see page 150. SF-Z00... Crimp tools, for turned contacts SF-Z00.. Crimp head and positioners for crimping pliers Description Stranded wire cross section [mm² / AWG] Crimping tool, pneumatic, for turned crimp contacts Ø 1 mm 0,14... 6 / AWG 6-10 SF-Z00 1607450 1 Crimping pliers, for turned crimp contacts Ø 1 mm 0,14... 6 / AWG 6-10 SF-Z0008 1605668 1 Crimping pliers, for turned crimp contacts Ø 1 mm 0,08... 0,5 / AWG 8-4 // 0,5 / AWG 0 SF-Z0007 1605665 1 Crimp head for crimping pliers SF-Z00, SF-Z0008 Crimp head for crimping plierssf-z0007 Positioners for crimping head SF-Z000 Positioners for crimp head SF-Z0004 SF-Z000 1605657 1 SF-Z0004 1605661 1 Marking "E" SF-Z001 1605678 1 "C" marking SF-Z000 1605655 1 146 CONINVERS

Crimping tools for turned contacts, P0 series Manually or pneumatically supported crimping pliers are used for turned crimp contacts for the P0 series. The crimping pliers are suitable for crimping turned contacts with Ø 1 mm and Ø mm. Four-arbor crimping pliers with digital display are available as an alternative to the manual crimping pliers with positioner and eccentric setting, see page 150. SF-Z00... Crimp tools, for turned contacts Tools and accessories For signal plug connectors and power connectors SF-Z00.. Crimp head and positioners for crimping pliers Description Stranded wire cross section [mm² / AWG] Crimping tool, pneumatic, for turned crimp contacts Ø 1 mm / Ø mm 0,14... 6 / AWG 6-10 SF-Z00 1607450 1 Crimping pliers for turned crimp contacts Ø 1 mm / Ø mm 0,14... 6 / AWG 6-10 SF-Z0008 1605668 1 Crimping pliers, for turned crimp contacts Ø 1 mm 0,08... 0,5 / AWG 8-4 // 0,5 / AWG 0 SF-Z0007 1605665 1 Crimp head for crimping pliers SF-Z00, SF-Z0008 SF-Z000 1605657 1 Crimp head for crimping plierssf-z0007 SF-Z0004 1605661 1 Positioners for crimp head SF-Z000 for appliance plug connectors Marking "D" SF-Z0011 1605675 1 Positioners for SF-Z000 crimp head, for cable and coupling connectors Marking "E" SF-Z001 1605678 1 Positioners for crimp head SF-Z0004 "C" marking SF-Z000 1605655 1 Notes: For the connection cross sections of 0.08 mm² and 0.14 mm² (SF signal contacts Ø 1 mm), use the SF-Z0007 crimping pliers. CONINVERS 147

Tools and accessories For signal plug connectors and power connectors Crimping tools for turned contacts, P70 series Manually or pneumatically supported crimping pliers are used for turned crimp contacts for the P70 series. The crimping pliers are suitable for crimping turned contacts with Ø mm and Ø.6 mm. Four-arbor crimping pliers with digital display are available as an alternative to the manual crimping pliers with positioner and eccentric setting, see page 150. SF-Z00.. Crimp tools, for turned contacts SF-Z00.. Crimp head and positioners for crimping pliers Description Stranded wire cross section [mm² / AWG] Crimping tool, pneumatic for turned crimp contacts Ø.6 mm 6,0... 16 / AWG10-6 SF-Z0014 1607446 1 Crimping tool, pneumatic, for inverted Ø mm / Ø.6 mm crimp contacts 0,14... 6 / AWG 6-10 SF-Z00 1607450 1 Crimping pliers for turned crimp contacts Ø.6 mm 6... 10 / AWG 10-8 SF-Z0009 160567 1 Crimping pliers for inverted Ø mm / Ø.6 mm crimp contacts 0,14... 6 / AWG 6-10 SF-Z0008 1605668 1 Crimp head for crimping pliers SF-Z0014, SF-Z00, SF-Z0009, SF-Z0008 Positioners for SF-Z000 crimp head, for appliance connectors SF-Z000 1605657 1 Marking "D" SF-Z0011 1605675 1 Positioners for SF-Z000 crimp head, for cable and coupling connectors "F" marking SF-Z001 1605681 1 148 CONINVERS

Crimping tools for turned contacts, P150 series Tools and accessories For signal plug connectors and power connectors The SF-Z005 manual crimping pliers are used for turned Ø 1.6 mm crimp contacts of the P150 series connectors. The electrically operated SL-Z0007 crimping tool is available for crimping the Ø 10 mm contacts comfortably. The crimping stamps for processing the Ø 10 mm contacts are used in pairs in each case. The stamps are adapted to the connection cross-sections and labelled. SL-Z0007 Crimping tools for turned contacts Ø 10 mm SF-Z005 Manual crimping pliers with digital display, 0.08 mm² to 6.0 mm² Description Connection cross section [mm / AWG] Electro-hydraulic crimping device incl. charger and rechargeable battery, for wire cross section 10... 50 mm² (power and PE contacts Ø 10 mm) SL-Z0007 161484 1 Crimping stamp for crimping device SL-Z0007 10 / AWG 8 SL-Z0011 161488 1 Crimping stamp for crimping device SL-Z0007 16 / AWG 6 SL-Z001 161489 1 Crimping stamp for crimping device SL-Z0007 5 / AWG 4 SL-Z001 161490 1 Crimping stamp for crimping device SL-Z0007 5 / AWG SL-Z0014 161491 1 Crimping stamp for crimping device SL-Z0007 50 / AWG 1 SL-Z0015 16149 1 Manual crimping pliers with digital display for turned crimp contacts 0,08... 6 / AWG 8-10 SF-Z005 160745 1 Accessories for electro-hydraulic crimping device SL-Z0007 Replacement battery SL-Z0008 161485 1 Table holder incl. foot actuation switch SL-Z0010 161487 1 Notes: The manual crimping pliers SF-Z005 with digital display are also suitable for crimping turned crimp contacts ST / SF / SM. CONINVERS 149

Tools and accessories For signal plug connectors and power connectors Crimping tools with digital display for turned contacts P0, RF, P0, P70 Four-arbor crimping pliers with digital display are available as an alternative to the manual crimping pliers with positioner and eccentric setting. The crimping pliers are suitable for crimping turned contacts with Ø 1 mm, Ø mm and Ø.6 mm. SF-Z005 Manual crimping pliers with digital display, 0.08 mm² to 6.0 mm² SF-Z006 Manual crimping pliers with digital display, 6.0 mm² to 10.0 mm² Description Stranded wire cross section [mm² / AWG] Manual crimping pliers with digital display for turned crimp contacts 0,08... 6 / AWG 8-10 SF-Z005 160745 1 Positioners for crimping the SF-6FS000 / SF-6DP000 contacts with a connection cross section of 1.5 mm SF-Z004 161666 1 Manual crimping pliers with digital display for turned crimp contacts 6... 10 / AWG 10-8 SF-Z006 1607454 1 150 CONINVERS

Tools and accessories For signal plug connectors and power connectors Crimping machine for turned contacts P0, RF, P0, P70 The pneumatic table crimping device is available as an alternative to the SF-Z005 manual crimping pliers. The crimping device offers convenient operation and saves a lot of time, especially when crimping bigger quantities and/or bigger connection crosssections. Compressed air with 6 bar operating pressure is required to operate the tabletop version. The crimping procedure is activated easily using a manual or foot switch. The table crimping device uses the same crimp head (locator) as the manual crimping pliers. The adjustable parameters for turned crimp contacts of the SF and SM series for connection cross-sections of 0.14 mm to 6mm are also applicable. Detailed operating instructions containing the crimp settings are enclosed with the packaging. Description Stranded wire cross section [mm² / AWG] SF-Z004 Pneumatic table crimping device Pneumatic table crimping device for turned SF / SM crimp contacts 0,14... 6 / AWG 6-10 SF-Z004 1614571 1 CONINVERS 151

Tools and accessories For signal plug connectors and power connectors Contact removal tools, square mounting flanges for P0, RF, P70 The removal tool is used for those contact carriers which are snapped into the housing without rear support. They are removed from the plug-in side using the removal tool. The square mounting flange is used for cable and coupling plug connectors. In this way, the product range is easily expanded with connectors as panel feed-throughs...-z0001 Removal tool for snap-in contact carriers..-z000. Square mounting flange for cable/coupling plug connector for wall mounting Description Wall mounting Removal tool for contact carriers snapped-in from the front for P0 series ST-Z0001 1607770 1 for RF series RF-Z0001 1607904 1 Square mounting flange, metal, with O ring seal, for P0 cable and coupling connector for wall mounting 4 x Ø.7 mm ST-Z000 1607771 5 4 x M ST-Z000 160777 5 Square mounting flange, metal, without seal, for P0 cable and coupling connector for wall mounting 4 x Ø.7 mm ST-Z0004 160777 5 4 x M ST-Z0005 1607775 5 Square mounting flange, metal, without seal, for RF cable and coupling plug connector for wall mounting Square mounting flange, metal, with O ring seal, for P70 cable and coupling connector for wall mounting 4 x M RF-Z000 1607905 5 4 x Ø 4. mm SM-Z000 160795 5 Square mounting flange, metal, without seal, for P70 cable and coupling plug connector for wall mounting 4 x Ø 4. mm SM-Z0004 160797 5 Installation dimensions Flange dimensions Installation dimensions Flange dimensions A B C d E F G H J ST-Z000 ST-Z000 ST-Z0004 4x M.5 /..9 + 0,,6 ± 0,1 1.6,6 ± 0,1 4x M /.7 M.5 8,0 ± 0,1 5 A F G ST-Z0005 RF-Z000 4x. 7.9 ± 0,1 8, ± 0,1 6. 8, ± 0,1 4x M M 5,0 6 ØB C E Ød H SM-Z000 SM-Z0004 4x M4 / 4. 46.1 ± 0,1 4,4 ± 0,1 45.0 4,4 ± 0,1 4x 4. M 55,0 ± 0,1 5,5 Note: Plastic mounting flanges can be supplied on request for insulating wall mounting. J 15 CONINVERS

Tools and accessories For signal plug connectors and power connectors Special wrench for P0, RF, P0, P70, P150 series The torque screw driver is specially adapted to the M circular connectors and simplifies the process of tightening and loosening the knurled nut safely even in places where space is restricted. The tool consists of a hook spanner as well as a torque screw driver with a set torque of.5 Nm. SF-Z00. Torque screw driver for M connectors with knurled nuts..-z00.. Special screw key for screwing the adapter Description Wrench size [mm] Torque screw driver incl. hook wrench For M connectors with knurled nuts SF-Z008 1607456 1 Replacement hook spanner for torque screw driver Special wrench for cable/coupling plug connectors for screwing the adapter SF-Z007 1607455 1 for P0, SW 19 series ST-Z001 161667 1 for RF, SW 4 series RF-Z0007 161447 1 for P70, SW 41 series SM-Z001 161449 1 for P150, SW 55 series SL-Z0016 161448 1 Special screw keys are available for the screw connection of the adapter cap for cable plug connectors and coupling connectors of the RF, P0, P70 and P150 series. The tool can be used with conventional torque spanners in order to tighten the adapter cap with the specified torque. CONINVERS 15

Tools and accessories For signal plug connectors and power connectors Dust protection caps, plastic A range of protective caps is available for signal and power plug connectors. These prevent penetration of dust and humidity to unmated connectors. Plastic protective caps enable IP40 degree of protection when locked...-z... Plastic dust protection caps Description Degree of protection when locked Plastic dust protection cap, for signal plug connector/power connector, with M17 outer thread IP40 ST-Z0006 1607776 5 Plastic dust protection cap, for signal plug connector/power connector, with M17 knurled nut (SPEEDCON and standard) IP40 ST-Z0007 1607777 5 Plastic dust protection cap with eye for signal/power connector, series RF, P0, with M outer thread IP40 SF-Z0019 1607449 5 Plastic dust protection cap, for signal plug connector/power connector, with M knurled nut IP40 RC-Z058 1604 5 Plastic dust protection cap, for signal plug connector/power connector, with M outer thread IP40 RC-Z059 16045 5 Plastic dust protection cap, anti-static, black, for signal plug connector/power connector, with M knurled nut IP40 RC-Z468 1611796 5 Plastic dust protection cap, anti-static, black, for signal plug connector/power connector, RF series, P0, with M outer thread IP40 RC-Z469 1611797 5 Plastic dust protection cap for bayonet cable plug connector, TU series IP40 TU-Z00 16060 5 Plastic dust protection cap for bayonet coupling and appliance plug connector, TU series IP40 TU-Z00 1607778 5 Plastic dust protection cap for signal plug connector, HC series, with M7 outer thread IP40 HC-Z9 159049 5 Plastic dust protection cap for signal plug connector, HC series, with M7 knurled nut IP40 HC-Z9 159049 5 Plastic dust protection cap for power connector, P70 series, with M40 outer thread IP40 SM-Z0001 1605866 10 Plastic dust protection cap for power connector, P150 series, with M58 outer thread IP40 SL-Z0005 160796 1 Ø5 Ø1,8 SF-Z0019, eye for fixing rope 154 CONINVERS

Tools and accessories For signal plug connectors and power connectors Dust protection caps, metal Metal protective caps are available for a higher degree of protection. These enable IP67 when locked. The wire is fixed to the housing panel and prevents the metal protective caps from being lost...-z... Metal dust protection caps Description Degree of protection when locked Metal dust protection cap, for power connectors series P0, with M outer thread IP67 SC-Z19 1605456 10 Metal dust protection cap with steel wire, for power connectors series P0, with M outer thread IP67 SC-Z0 1605457 10 Metal dust protection cap with steel wire, for power connectors series P0, with M knurled nuts IP67 SC-Z 1605459 10 Metal dust protection cap, for signal plug connector, with M outer thread IP67 RC-Z104 160460 10 Metal dust protection cap with steel wire, for signal plug connector, with M outer thread IP67 RC-Z068 16046 10 Metal dust protection cap with steel wire, for signal plug connector, with M knurled nut IP67 RC-Z06 16048 10 Metal dust protection cap with steel wire, for bayonet coupling and appliance plug connector, TU series Metal dust protection cap with steel wire, for signal plug connector HC series, with M7 outer thread Metal dust protection cap with steel wire, for signal plug connector HC series, with M7 knurled nut IP67 TU-Z17 160605 10 IP67 HC-Z91 1590491 10 IP67 HC-Z9 16189 10 CONINVERS 155

Ordering examples and type descriptions Ordering examples The modular circular connectors are delivered as individual components. Flexible combination options for housings, cable glands and contact inserts allow easy storage. M modular signal plug connectors - RC series Ordering example: 17-pos. conductor connection (cable plug connector and coupling connector) Description Number Cable plug connector housing, unshielded, with Pg11 Solder contact insert incl. contacts, 17-pos. pin Cable gland for unshielded applications, PG 11, IP 68 Coupling connector housing, unshielded, with Pg11 Solder contact insert incl. contacts, 17-pos. socket RC-0000000100 15959 1 RC-17P1N10000 160119 1 RC-Z196 16048 RC-0000000700 15961 1 RC-17S1N10000 1601799 1 M modular signal plug connectors - RC series Ordering example: 17-pos. appliance plug connector Description Number Appliance plug connector housing, straight, front mounting Solder contact carrier incl. contacts, 17-pos. socket RC-000000000 159574 1 RC-17S1N10000 1601799 1 Modular signal plug connectors - RC series Ordering example: 6-pos. crimp contact carrier and crimp contacts separate Description Number Crimp contact carrier, pin, 6-pos., contact insert numbering, standard Crimp contacts, pin, turned Ø.0 mm, crimp range of 1.0-1.5 mm / AWG 18-16 RC-06P1N8A0000 15941 1 RC-5CP000 16051 6 156 CONINVERS

Ordering examples and type descriptions Ordering examples Plug connectors are fully assembled upon delivery and the respective crimp contacts must be ordered separately. These are delivered along with the connectors in separate packing. M power connectors - P0 series Ordering example: 8-pos. (4++PE) cable plug connector with additional cable gland Description Number Power cable plug connector, 8-pos. (4++PE), with additional M0 x 1.5 thread for ext. cable gland, universal cable seal Ø 7.5... 14 mm Crimp contacts turned, socket Ø.0 mm (power contacts and PE contact), crimp range of 0.5... 1.0 mm / AWG 4-18 Crimp contacts turned, socket Ø 1.0 mm (signal contacts), crimp range of 0.08... 0. mm / AWG 8-4 M0 x 1.5 cable gland, IP 68, for conductor diameter of 9... 1 mm SF-7ES1N8AR4DU 160561 1 SF-7PS000 160566 4 SF-6CS000 160556 4 RC-Z417 1607019 1 M power connectors - P0 series Ordering example: 8-pos. (4++PE), appliance plug connector, angled, fixed Description Number Power appliance plug connector, angled, fixed, 8-pos. (4++PE) Crimp contacts turned, pin Ø.0 mm (power contacts and PE contact), crimp range of 4 mm / AWG 1 Crimp contacts turned, pin Ø 1.0 mm (signal contacts), crimp range of 0.5-1.0 mm / AWG 0-18 SF-7EP1N8AAF00 1607046 1 SF-7MP000 160566 4 SF-6AP000 1605554 4 M signal plug connector - RF series Ordering example: 1-pos. cable plug connector for the transmission of feedback signals Description Number Signal cable plug connector, 1-pos., N coding, direction of rotation standard, universal cable seal Ø -1. mm RF-1S1N8A80DU 160776 1 Crimp contacts turned Socket Ø 1.0 mm, crimp range of 0.08-0. mm SF-6CS000 160556 1 CONINVERS 157

Ordering examples and type descriptions Modular signal plug connectors - CONINVERS signal Bayonet housing TU series M housing RC, UC series description TU 00 00 0 00 8U DU description RC 00 00 0 00 80 FZ description 80 Signal plug connectors TU Bayonet Number of positions 00 Free, see contact insert Contact type/direction of rotation 00 Free, see contact insert Coding 0 Free, see contact insert Contact connection 00 Free, see contact insert Housing type 41 Appliance plug connectors, rear mounting, 4 x M, flat gasket 5 Appliance plug connectors, rear mounting, 4 x Ø. mm, radial O ring 8U Cable plug connectors, shielded 9U Coupling connectors, shielded TU Cable plug connectors, angled, shielded WB Appliance plug connectors, front mounting, 4 x Ø. mm, axial O ring Cable clamping/shield accessories 00 No cable clamping DU Universal seal/shield Crimp contact carrier without contacts RC, UC, TU series description Modular signal plug connectors RC Standard types Number of positions 06 6 16 16 07 7 17 17 09 9 (8+1) 1R 19 (16++PE) 1 1 Contact type/direction of rotation P1 Pin/standard P Pin/opposite S1 Socket/standard S Socket/opposite Coding N N coding 0 RC 06 P1 N 8 A Contact connection RA Crimp for 16++PE (without contacts) 8 A Crimp (without contacts) Housing type 00 Free, see housing Cable seal 00 Free, see housing 00 00 Signal plug connectors RC M standard types NC s with plastic cap RM s with metric connecting threads UC s with universal shield connection, extended cable entry range up to Ø 14.5 mm Number of positions 00 Free, see contact insert Contact type/direction of rotation 00 Free, see contact insert Coding 0 Free, see contact insert Contact connection 00 Free, see contact insert Housing type see housing type table (on the right) Cable clamping/shield accessories 00 No cable clamping DU Universal seal/shield FZ Depending on the cable, to be ordered separately Contact inserts incl. contacts RC, UC, TU series description Modular signal plug connectors RC Standard types Number of positions 06 6 16 16 07 7 17 17 6 9 (6+) 19 19 (16+) 09 9 (8+1) 1R 19 (16++PE) 1 1 Contact type/direction of rotation P1 Pin/standard P Pin/opposite S1 Socket/standard S Socket/opposite Coding N N coding 0 RC 06 P1 N 1 00 00 Contact connection 1 Solder (incl. contacts) Solder-in, solder pin length A (incl. contacts) Solder-in, solder pin length B (incl. contacts) 8B, 8C, 8D, 8E, 8K, 8L crimp (incl. contacts) A Solder-in, solder pin length C (incl. contacts) C Solder-in, solder pin length D (incl. contacts) RM Crimp for 16++PE (incl. contacts) S Screw (incl. contacts) Housing type 00 Free, see housing Cable seal 00 Free, see housing Housing type 11 Cable plug connectors, unshielded, connecting thread Pg9 / M16 1 Cable plug connectors, unshielded, connecting thread Pg11 1 Cable plug connectors, unshielded, connecting thread Pg1.5 / M0 Appliance plug connectors, front mounting, 4 x Ø.7 mm, flat gasket 4 Appliance plug connectors, rear mounting, 4 x M.5, radial O ring 5 Appliance plug connectors, rear mounting, 4 x Ø.7 mm, radial O ring 61 Appliance plug connectors, front mounting, central fastening thread M0 71 Coupling connectors, unshielded, connecting thread Pg9 / M16 7 Coupling connectors, unshielded, connecting thread Pg11 7 Coupling connectors, unshielded, connecting thread Pg1.5 / M0 80 Cable plug connectors, shielded 90 Coupling connectors, shielded AD Appliance plug connectors, front mounting, angled rotatable, 4 x Ø. mm, axial O ring B Coupling connectors, shielded (feed-through), front mounting with mounting flange 4 x Ø.7 mm C0 E0 F FN H0 K0 KS M0 N NN Q0 Q QN Coupling connectors, shielded (feed-through), rear mounting with mounting flange 4 x Ø M.5 Appliance plug connectors, rear mounting, reinforced flange, 4 x M, radial O ring Coupling connectors, shielded, connecting thread Pg1.5 Coupling connectors, shielded, connecting thread Pg16 Appliance plug connectors, rear mounting, central fixing nut, axial O ring Cable plug connectors, shielded, plastic sheath Cable plug connectors, shielded, plastic cap Coupling connectors, shielded, plastic sheath Cable plug connectors, angled, shielded, connecting thread Pg1.5 Cable plug connectors, angled, shielded, connecting thread Pg16 Coupling connectors, shielded (feed-through), rear mounting with mounting flange, central fixing nut Coupling connectors, shielded (feed-through), rear mounting with central fixing nut, connecting thread Pg1.5 Coupling connectors, shielded (feed-through), rear mounting with central fixing nut, connecting thread Pg16 R Cable plug connectors, shielded, connecting thread Pg1.5 RN Cable plug connectors, shielded, connecting thread Pg16 T0 Cable plug connectors, angled, shielded WQ Appliance plug connectors, front mounting, reinforced flange, 4 x Ø.7 mm radial O ring Z1 Cable plug connectors, angled, unshielded, connecting thread Pg9 / M16 Z Cable plug connectors, angled, unshielded, connecting thread Pg11 Z Cable plug connectors, angled, unshielded, connecting thread Pg1.5 / M0 158 CONINVERS

Ordering examples and type descriptions Signal plug connectors - CONINVERS signal M16 signal plug connectors PV series M signal plug connectors RF series M7 signal plug connectors HC series description PV- 08 P1 N 1 61 00 description RF 1 S1 N 8A 80 0 description HC 6 S1 N 1 80 DU Signal plug connectors Signal plug connectors Signal plug connectors PV M16 appliance plug connectors RF M HC M7 Number of positions 08 8 1 1 10 10 14 14 Contact type/direction of rotation P1 Pin/standard Coding N N coding 0 Contact connection 1 Solder (incl. contacts) Solder-in (incl. contacts) Housing type 61 Appliance plug connectors, front mounting HG Appliance plug connectors, rear mounting Cable seal 00 No cable seal M17 signal plug connectors ST series description Signal plug connectors ST M17 Number of positions 17 17-pos. Contact type/direction of rotation P1 Pin/standard S1 Socket/standard Coding N N coding 0 Contact connection 8A Crimp (without contacts) ST 17 P1 N 8A 80 0 S Housing type 61 Appliance plug connectors, front mounting, central fastening M18 x 0.75 80 Cable plug connectors, shielded 90 Coupling connectors, shielded AC Appliance plug connectors, front mounting, angled, rotatable, flange dimensions 5 x 5 mm AD Appliance plug connectors, front mounting, angled, rotatable, flange dimensions 1.6 x 1.6 mm H1 Appliance plug connectors, rear mounting, central fastening M0 x 1.5 W4 Appliance plug connectors, front mounting, contact insert for snapping in WQ Appliance plug connectors front mounting Cable seal 00 No cable seal 0-04 Fixed gaskets Locking thread S SPEEDCON, not occupied, M17 standard locking Number of positions 1 1-pos. 17 17-pos. 16 16-pos. Contact type/direction of rotation P1 Pin/standard P Pin/opposite S1 Socket/standard S Socket/opposite Coding N N coding 0 S S coding 0 /N coding 0 Contact connection 8A Crimp (without contacts) Housing type 80 Cable plug connectors, shielded 90 Coupling connectors, shielded 8V Cable plug connectors, shielded, high-grade steel 9V Coupling connectors, shielded, high-grade steel A Appliance plug connectors, front mounting, angled, fixed, -part housing AC Appliance plug connectors, front mounting, angled rotatable, flange dimensions 8 x 8 mm AD Appliance plug connectors, front mounting, angled rotatable, flange dimensions 6 x 6 mm AF Appliance plug connectors, front mounting, angled fixed, flange dimensions 6 x 6 mm AK Appliance plug connectors, front mounting, angled fixed, flange dimensions 8 x 8 mm W4 Appliance plug connectors, front mounting, 4 x Ø.7 mm, contact carrier for snapping in WA Appliance plug connectors, front mounting, 4 x Ø. mm WB Appliance plug connectors, front mounting, 4 x Ø. mm, contact carrier for snapping in WQ Appliance plug connectors, front mounting, 4 x Ø.7 mm WU Appliance plug connectors, front mounting, high-grade steel, 4 x Ø.7 mm WV Appliance plug connectors, front mounting, high-grade steel, 4 x Ø. mm Cable seal 00 No cable seal DU Universal gasket 0-04 Fixed gaskets Number of positions 6 6-pos. AR 5+PE 8 8-pos. Contact type/direction of rotation P1 Pin/standard S1 Socket/standard Coding N N coding 0 Contact connection 1 Solder (incl. contacts) Solder-in, solder pin length A (incl. contacts) Solder-in, solder pin length B (incl. contacts) T Solder-in, solder pin length C (incl. contacts) RA Crimp (without contacts) Housing type Appliance plug connectors, front mounting, 4 x Ø. mm, flat gasket 4 Appliance plug connectors, rear mounting, 4 x M, radial O ring 6 Appliance plug connectors, front mounting, Pg 1 central fastening, axial O ring 80 Cable plug connectors, shielded 90 Coupling connectors, shielded WA Appliance plug connectors, front mounting, 4 x Ø. mm, radial O ring Cable seal 00 No cable seal DU Universal gasket CONINVERS 159

Ordering examples and type descriptions Power connectors - CONINVERS power M17 power connectors P0 series M power connectors P0 series description ST E P1 N 8A 80 0 S description SF 5E S1 N 8A 80 DU Powerconnectors Powerconnectors ST P0 up to 0 A SF P0 up to 0 A Number of positions E +PE 5E 5+PE 6E 6+PE 7E 7+PE 8E 5++PE Contact type/direction of rotation P1 Pin/standard S1 Socket/standard Coding N N coding 0 Contact connection 8A Crimp (without contacts) Housing type 61 Appliance plug connectors, front mounting, central fastening M18 x 0.75 80 Cable plug connectors, shielded 90 Coupling connectors, shielded AC Appliance plug connectors, front mounting, angled, rotatable, flange dimensions 5 x 5 mm AD Appliance plug connectors, front mounting, angled, rotatable, flange dimensions 1.6 x 1.6 mm H1 Appliance plug connectors, rear mounting, central fastening M0 x 1.5 W4 Appliance plug connectors, front mounting, contact insert for snapping in WQ Appliance plug connectors front mounting Cable seal 00 No cable seal 0-04 Fixed gaskets Locking thread S SPEEDCON, not occupied, M17 standard locking Number of positions 5E 5+PE 7E 4++PE Contact type/direction of rotation P1 Pin/standard S1 Socket/standard Coding N N coding 0 Contact connection 8A Crimp (without contacts) Housing type 80 Cable plug connectors, shielded, short 90 Coupling connectors, shielded, short 8L Cable plug connectors, shielded, long 9L Coupling connectors, shielded, long A Appliance plug connectors, front mounting, angled, fixed, -part housing AC Appliance plug connectors, front mounting, angled rotatable, flange dimensions 8 x 8 mm AD Appliance plug connectors, front mounting, angled rotatable, flange dimensions 6 x 6 mm AF Appliance plug connectors, front mounting, angled fixed, flange dimensions 6 x 6 mm AK Appliance plug connectors, front mounting, angled fixed, flange dimensions 8 x 8 mm C0 Panel feed-through, short, rear mounting, mounting flange 4 x M CL Panel feed-through, long, rear mounting, mounting flange 4 x M F4 Coupling connector, shielded, for additional cable gland M0 x 1.5 R4 Cable plug connector, shielded, for additional cable gland M0 x 1.5 S0 Panel feed-through, pin inside - socket outside WA Appliance plug connectors front mounting WK Appliance plug connectors, front mounting, low design Y0 Appliance plug connector with knurled nut, front mounting YW Appliance plug connector with knurled nut, front mounting, angled Cable seal 00 No cable seal DU, DL Universal gasket A1 - A Fixed gaskets B1 - B4 Fixed gaskets 160 CONINVERS

Ordering examples and type descriptions Power connectors - CONINVERS power M40 power connectors P70 series M58 power connectors P150 series description SM 5E S1 N 8A 8L S description SL 5E S1 N 8A 80 01 Powerconnectors Powerconnectors SM P70 up to 70 A SL P150 up to 150 A Number of positions 5E ++PE 7E 4++PE Contact type/direction of rotation P1 Pin/standard S1 Socket/standard PW Pin version for appliance plug connectors/standard Number of positions 5E ++PE 7E 4++PE Contact type/direction of rotation P1 Pin/standard S1 Socket/standard PW Pin version for appliance plug connectors/standard Coding N N coding Contact connection 8A Crimp (without contacts) Housing type 80 Cable plug connectors, shielded, short 90 Coupling connectors, shielded, short 8L Cable plug connectors, shielded, with SPEEDCON knurl 8S Cable plug connectors, shielded, long 9L Coupling connectors, shielded, with SPEEDCON external thread A Appliance plug connectors, front mounting, angled fixed, -part. housing AD Appliance plug connectors, front mounting, angled, rotatable C0 Panel feed-through, short, rear mounting, mounting flange 4 x M4 CL Panel feed-through long, rear mounting, mounting flange 4 x M4 Q0 Panel feed-through, short, rear mounting, central fastening QL Panel feed-through, long, rear mounting, central fastening S0 Panel feed-through, pin inside - socket outside, mounting flange 4 x Ø 4. mm SA Panel feed-through, pin inside - socket outside, mounting flange 4 x M4 WT Appliance plug connectors front mounting Y0 Appliance plug connectors with knurled nut, front mounting YW Appliance plug connectors with knurled nut, front mounting, angled Cable seal 00 No cable seal 0-4 Fixed gaskets Coding N N coding Contact connection 8 A Crimp (without contacts) Housing type 80 Cable plug connectors, shielded 90 Coupling connectors, shielded WA Appliance plug connectors front mounting Cable seal 00 No cable seal 01-0 Fixed gaskets Locking thread S SPEEDCON Legal notes: The technical data specified in this catalog refers exclusively to connectors All specifications are non-binding product descriptions No liability for typing/printing errors. Subject to change without notice Samples for presentation are not tested with reference to the technical properties specified in the catalog The Terms and Conditions applicable are exclusively the "General Terms and Conditions of Supply and Payment" of CONINVERS GmbH valid at the time. The conditions can be requested on +49 (0) 70/9 74-0 or viewed on the homepage at http://www.coninvers.com/com/company/187.jsp. CONINVERS 161

Index Alphabetical Page Page Page Page H P RC-09P1NC0000 1595519 7 RC-09P1NS0000 15955 RC-09PN10000 1595600 RC-09PN8A0000 1595744 4 RC-5CP000 16051 5 RC-5CS000 160517 5 RC-6P1N10000 16058 RC-6P1N0000 16067 6 HC-6P1N100 159076 77 HC-6P1N1400 159080 79 HC-6P1N1600 15908 76 HC-6P1N180DU 159085 74 PV-08P1N16100 159490 41 PV-08P1N1HG00 159491 41 PV-08P1NHG00 1609977 41 PV-10P1N16100 15949 41 RC-09PN8C0000 1595758 RC-09PN8L0000 160700 RC-09S1N10000 1595791 RC-09S1N0000 159679 6 RC-6P1N0000 160640 7 RC-6P1NA0000 160645 7 RC-6P1NC0000 160651 7 RC-6S1N10000 160668 HC-6P1N190DU 159089 75 HC-6P1N1WA00 15900 78 HC-6P1N00 161508 77 HC-6P1N400 159007 79 PV-10P1N1HG00 159494 41 PV-10P1NHG00 1609978 41 PV-1P1N16100 159496 41 PV-1P1N1HG00 159497 41 RC-09S1N0000 160700 7 RC-09S1N8A0000 15960 4 RC-09S1N8C0000 1596417 RC-09S1N8L0000 1607004 RC-6S1N0000 160764 6 RC-6S1N0000 160767 7 RC-6S1NA0000 160774 7 RC-6S1NC0000 160778 7 HC-6P1N00 161509 77 HC-6P1N400 159011 79 HC-6P1NRA00 15901 77 HC-6P1NRA400 159014 79 PV-1P1NHG00 1609979 41 PV-14P1N16100 159499 41 PV-14P1N1HG00 159500 41 PV-14P1NHG00 159501 41 RC-09S1NA0000 159641 7 RC-09S1NC0000 159644 7 RC-09S1NS0000 1596456 RC-09SN10000 159655 RC-67P000 160797 80 RC-67S000 160800 80 RC-6EP000 16080 5 RC-6ES000 160805 5 HC-6P1NRA600 159016 76 HC-6P1NRA80DU 159019 74 HC-6P1NRA90DU 15901 75 HC-6P1NRAWA00 1590 78 R RC-09SN8A0000 1596706 4 RC-09SN8C0000 159674 RC-09SN8L0000 1607005 RC-1P1N10000 1596856 RC-6FP000 160808 5 RC-6FS000 160811 5 RC-6KP000 160814 80 RC-6KS000 160816 80 HC-6P1NT00 15908 77 HC-6P1NT400 161540 79 HC-6P1NTWA00 161510 78 HC-6S1N100 159045 77 RC-00000001100 15955 17 RC-0000000100 15959 17 RC-0000000100 159546 17 RC-000000000 159574 0 RC-1P1N0000 159740 6 RC-1P1N0000 1607006 7 RC-1P1N8A0000 1597464 4 RC-1P1N8D0000 159765 RC-6LP000 160819 5 RC-6LS000 1608 5 RC-6MP000 16086 80 RC-6MS000 16089 80 HC-6S1N1400 159047 79 HC-6S1N1600 159049 76 HC-6S1N180DU 159054 74 HC-6S1N190DU 159057 75 RC-0000000400 159589 RC-0000000500 159599 RC-00000006100 159604 1 RC-00000007100 159618 17 RC-1P1N8E0000 1597641 RC-1P1NA0000 159764 7 RC-1P1NC0000 1597660 7 RC-1P000 159786 5 RC-6RP000 16086 80 RC-6RS000 160846 80 RC-E0146 160961 141 RC-Z06 160406 14 HC-6S1N1WA00 15907 78 HC-6S1NRA00 159081 77 HC-6S1NRA400 15908 79 HC-6S1NRA600 15908 76 RC-0000000700 15961 17 RC-0000000700 15966 17 RC-000000080FZ 159680 16 RC-000000090FZ 159750 16 RC-1PN10000 1597867 RC-1PN8A0000 1598196 4 RC-1PN8D0000 15989 RC-1PN8E0000 159895 RC-Z051 16041 RC-Z05 160416 RC-Z05 160418 RC-Z058 1604 154 HC-6S1NRA90DU 159088 75 HC-6S1NRAWA00 159040 78 HC-8P1N100 1590407 77 HC-8P1N1400 1590408 79 RC-0000000AD00 159777 1 RC-0000000BFZ 159781 0 RC-0000000C0FZ 159790 RC-0000000E000 15981 RC-1S1N10000 1598466 RC-1S1N0000 1599079 6 RC-1S1N0000 1607007 7 RC-1S1N8A0000 159918 4 RC-Z059 16045 154 RC-Z06 16048 155 RC-Z068 16046 155 RC-Z091 16044 HC-8P1N1600 1590409 76 HC-8P1N180DU 159041 74 HC-8P1N190DU 1590415 75 HC-8P1N1WA00 1590418 78 RC-0000000H000 1598 RC-0000000K0FZ 159865 16 RC-0000000M0FZ 159899 16 RC-0000000Q0FZ 15994 RC-1S1N8D0000 15994 RC-1S1N8E0000 159948 RC-1S1NA0000 1607008 7 RC-1S1NC0000 159967 7 RC-Z09 160445 RC-Z09 160447 RC-Z096 160449 141 RC-Z099 160455 141 HC-8P1N00 16151 77 HC-8P1N400 16151 79 HC-8P1N00 161514 77 HC-8P1N400 161515 79 RC-0000000T0FZ 15999 16 RC-0000000WQ00 15901 0 RC-0000000Z100 15907 17 RC-0000000Z00 159040 17 RC-1S000 1599600 5 RC-1SN10000 1599614 RC-1SN8A0000 1600076 4 RC-1SN8D0000 16001 RC-Z104 160460 155 RC-Z10 160467 140 RC-Z191 16044 RC-Z196 16048 HC-8P1NT00 161516 77 HC-8P1NT400 15904 79 HC-8P1NTWA00 161517 78 HC-8S1N100 159047 77 RC-0000000Z00 159044 17 RC-06P1N10000 15907 RC-06P1N0000 15995 6 RC-06P1N0000 1606991 7 RC-1SN8E0000 16004 RC-1041 1600417 51 RC-16P1N10000 1600509 RC-16P1N8A0000 1600707 4 RC-Z0 160445 RC-Z1 16046 4 RC-Z 160464 4 RC-Z5 160468 4 HC-8S1N1400 160719 79 HC-8S1N1600 159048 76 HC-8S1N180DU 15904 74 HC-8S1N190DU 159044 75 RC-06P1N8A0000 15941 4 RC-06P1N8B0000 15955 RC-06P1N8K0000 160699 RC-06P1NA0000 15951 7 RC-16P1N8D0000 1600747 RC-16S1N10000 1600816 RC-16S1N8A0000 1601058 4 RC-16S1N8D0000 1601116 RC-Z7 160470 4 RC-Z8 16047 4 RC-Z9 160475 4 RC-Z74 1604409 140 HC-8S1N1WA00 159049 78 HC-ARP1NRA00 1590454 77 HC-ARP1NRA400 161541 79 HC-ARP1NRA600 1614648 76 RC-06P1NC0000 160699 7 RC-06P1NS0000 159555 RC-06S1N10000 159645 RC-06S1N0000 159400 6 RC-17P1N10000 160119 RC-17P1N0000 1607009 6 RC-17P1N0000 1607010 7 RC-17P1N8A0000 1601451 4 RC-Z90 1604417 141 RC-Z8 160444 141 RC-Z91 1604449 4 RC-Z9 160445 4 HC-ARP1NRA80DU 160819 74 HC-ARP1NRA90DU 16154 75 HC-ARP1NRAWA00 1590458 78 HC-ARS1NRA00 1590467 77 RC-06S1N0000 1606994 7 RC-06S1N8A0000 159401 4 RC-06S1N8B0000 1594145 RC-06S1N8K0000 1606995 RC-17P1N8D0000 160164 RC-17P1N8E0000 160166 RC-17P1NA0000 160168 7 RC-17P1NC0000 1601647 7 RC-Z9 1604454 4 RC-Z94 1604456 4 RC-Z95 1604458 4 RC-Z96 1604460 4 HC-ARS1NRA400 161518 79 HC-ARS1NRA600 161519 76 HC-ARS1NRA80DU 1608 74 HC-ARS1NRA90DU 16150 75 RC-06S1NA0000 1594149 7 RC-06S1NC0000 1606996 7 RC-06S1NS0000 1594164 RC-07P1N10000 15946 RC-17PN10000 160177 RC-17S1N10000 1601799 RC-17S1N0000 1607011 6 RC-17S1N0000 160701 7 RC-Z98 160446 4 RC-Z99 1604465 4 RC-Z401 1604468 4 RC-Z40 1604470 4 HC-ARS1NRAWA00 16151 78 HC-Z91 1590491 155 HC-Z9 159049 154 HC-Z9 159049 154 RC-07P1N8A0000 159445 4 RC-07P1N8B0000 1594497 RC-07P1N8K0000 1606997 RC-07P1NS0000 1594515 RC-17S1N8A0000 16008 4 RC-17S1N8D0000 1608 RC-17S1N8E0000 16084 RC-17S1NA0000 1607014 7 RC-Z40 160447 4 RC-Z404 1604474 4 RC-Z406 1607015 RC-Z407 1607016 HC-Z00 1590498 76 HC-Z9 16189 155 RC-07S1N10000 1594558 RC-07S1N8A0000 159471 4 RC-07S1N8B0000 1594786 RC-07S1N8K0000 1606998 RC-17S1NC0000 16095 7 RC-17SN10000 1608 RC-19P1N10000 16048 RC-19S1N10000 160749 RC-Z409 1604479 RC-Z410 1604481 RC-Z414 1607018 RC-Z417 1607019 N RC-07S1NS0000 1594801 RC-09P1N10000 1594887 RC-09P1N0000 1606999 6 RC-09P1N0000 1607000 7 RC-1RP1NRA0000 160066 4 RC-1RP1NRM0000 160144 RC-1RS1NRA0000 1601 4 RC-1RS1NRM0000 16005 RC-Z45 1604491 4 RC-Z46 1604495 4 RC-Z47 1604497 4 RC-Z48 160701 4 NC-0000000KSFZ 15900 16 RC-09P1N8A0000 159575 4 RC-09P1N8C0000 1595501 RC-09P1N8L0000 1607001 RC-09P1NA0000 1595507 7 RC-P000 1601 5 RC-S000 1607 5 RC-5AP000 160505 5 RC-5AS000 160509 5 RC-Z49 1604500 4 RC-Z40 160450 4 RC-Z41 1604505 4 RC-Z4 1604506 4 16 CONINVERS

Index Alphabetical Page Page Page Page RC-Z4 16070 4 RC-Z44 1604509 4 RC-Z45 1604511 4 RC-Z46 160451 4 RF-1PN8A8V0 161407 66 RF-1PN8A8VDU 161407 66 RF-1PN8A900 16075 59 RF-1PN8A900 160754 59 RF-1S1S8AAF00 16079 6 RF-1S1S8AAK00 16079 6 RF-1S1S8AW400 160786 61 RF-1S1S8AWA00 160794 60 RF-16PN8A8V0 161545 66 RF-16PN8A8V0 1614090 66 RF-16PN8A8VDU 1614091 66 RF-16PN8A900 161769 59 RC-Z47 1604516 4 RC-Z48 1604517 4 RC-Z49 1604519 4 RC-Z440 160450 4 RF-1PN8A90DU 160755 59 RF-1PN8A9V0 161964 67 RF-1PN8A9V0 161965 67 RF-1PN8A9VDU 161966 67 RF-1S1S8AWB00 160787 61 RF-1S1S8AWQ00 160789 60 RF-1S1S8AWU00 161709 68 RF-1S1S8AWV00 161710 68 RF-16PN8A900 161770 59 RF-16PN8A90DU 161771 59 RF-16PN8A9V0 161985 67 RF-16PN8A9V0 161986 67 RC-Z441 16045 4 RC-Z44 160454 4 RC-Z44 160456 4 RC-Z444 160459 4 RF-1PN8AA00 160756 6 RF-1PN8AAC00 1607814 64 RF-1PN8AAD00 160757 64 RF-1PN8AAF00 160758 6 RF-1SN8A800 160795 58 RF-1SN8A800 160796 58 RF-1SN8A80DU 160797 58 RF-1SN8A8V0 161408 66 RF-16PN8A9VDU 161987 67 RF-16PN8AA00 16177 6 RF-16PN8AAC00 16177 64 RF-16PN8AAD00 161774 64 RC-Z445 16045 4 RC-Z446 160454 4 RC-Z447 16070 4 RC-Z448 160456 4 RF-1PN8AAK00 160759 6 RF-1PN8AW400 1607816 61 RF-1PN8AWA00 160760 60 RF-1PN8AWB00 1607817 61 RF-1SN8A8V0 161408 66 RF-1SN8A8VDU 1615068 66 RF-1SN8A900 160700 59 RF-1SN8A900 160701 59 RF-16PN8AAF00 161775 6 RF-16PN8AAK00 161776 6 RF-16PN8AW400 161777 61 RF-16PN8AWA00 161778 60 RC-Z449 160704 4 RC-Z450 160459 4 RC-Z451 1604541 4 RC-Z45 160705 4 RF-1PN8AWQ00 1607818 60 RF-1PN8AWU00 161704 68 RF-1PN8AWV00 1614414 68 RF-1PS8A800 160761 58 RF-1SN8A90DU 16070 59 RF-1SN8A9V0 161976 67 RF-1SN8A9V0 161977 67 RF-1SN8A9VDU 161978 67 RF-16PN8AWB00 161779 61 RF-16PN8AWQ00 161780 60 RF-16PN8AWU00 1617 68 RF-16PN8AWV00 16174 68 RC-Z45 1604545 4 RC-Z454 1604547 4 RC-Z455 1604549 4 RC-Z46 1604558 5 RF-1PS8A800 16076 58 RF-1PS8A80DU 160764 58 RF-1PS8A8V0 1614074 66 RF-1PS8A8V0 1614075 66 RF-1SN8AA00 16070 6 RF-1SN8AAC00 160784 64 RF-1SN8AAD00 160704 64 RF-1SN8AAF00 160705 6 RF-16S1N8A800 16175 58 RF-16S1N8A800 16176 58 RF-16S1N8A80DU 16177 58 RF-16S1N8A8V0 161409 66 RC-Z46 1604561 5 RC-Z468 1611796 154 RC-Z469 1611797 154 RC-Z490 161180 140 RF-1PS8A8VDU 1614076 66 RF-1PS8A900 160765 59 RF-1PS8A900 160766 59 RF-1PS8A90DU 160767 59 RF-1SN8AAK00 160706 6 RF-1SN8AW400 160784 61 RF-1SN8AWA00 160707 60 RF-1SN8AWB00 1607844 61 RF-16S1N8A8V0 161409 66 RF-16S1N8A8VDU 1614094 66 RF-16S1N8A900 161781 59 RF-16S1N8A900 16178 59 RC-Z494 16141 140 RC-Z504 1618 140 RF-1P1N8A800 16075 58 RF-1P1N8A800 16077 58 RF-1PS8A9V0 161967 67 RF-1PS8A9V0 161968 67 RF-1PS8A9VDU 161969 67 RF-1PS8AA00 160768 6 RF-1SN8AWQ00 1607845 60 RF-1SN8AWU00 161711 68 RF-1SN8AWV00 16171 68 RF-1SS8A800 160708 58 RF-16S1N8A90DU 16178 59 RF-16S1N8A9V0 161988 67 RF-16S1N8A9V0 161989 67 RF-16S1N8A9VDU 161990 67 RF-1P1N8A80DU 16078 58 RF-1P1N8A8V0 16159 66 RF-1P1N8A8V0 1614066 66 RF-1P1N8A8VDU 1614067 66 RF-1PS8AAC00 160780 64 RF-1PS8AAD00 160769 64 RF-1PS8AAF00 160770 6 RF-1PS8AAK00 160771 6 RF-1SS8A800 160709 58 RF-1SS8A80DU 160710 58 RF-1SS8A8V0 1614084 66 RF-1SS8A8V0 1614085 66 RF-16S1N8AA00 161784 6 RF-16S1N8AAC00 161785 64 RF-16S1N8AAD00 16180 64 RF-16S1N8AAF00 161786 6 RF-1P1N8A900 16079 59 RF-1P1N8A900 16070 59 RF-1P1N8A90DU 16071 59 RF-1P1N8A9V0 161958 67 RF-1PS8AW400 160781 61 RF-1PS8AWA00 16077 60 RF-1PS8AWB00 16078 61 RF-1PS8AWQ00 16078 60 RF-1SS8A8VDU 1614086 66 RF-1SS8A900 16071 59 RF-1SS8A900 16071 59 RF-1SS8A90DU 160714 59 RF-16S1N8AAK00 161787 6 RF-16S1N8AW400 161788 61 RF-16S1N8AWA00 161789 60 RF-16S1N8AWB00 161790 61 RF-1P1N8A9V0 161959 67 RF-1P1N8A9VDU 161960 67 RF-1P1N8AA00 1607 6 RF-1P1N8AAC00 160780 64 RF-1PS8AWU00 161705 68 RF-1PS8AWV00 161706 68 RF-1S1N8A800 16077 58 RF-1S1N8A800 160775 58 RF-1SS8A9V0 161979 67 RF-1SS8A9V0 161980 67 RF-1SS8A9VDU 161981 67 RF-1SS8AA00 160715 6 RF-16S1N8AWQ00 161791 60 RF-16S1N8AWU00 16178 68 RF-16S1N8AWV00 16179 68 RF-16SN8A800 16170 58 RF-1P1N8AAD00 1607 64 RF-1P1N8AAF00 16074 6 RF-1P1N8AAK00 16075 6 RF-1P1N8AW400 160780 61 RF-1S1N8A80DU 160776 58 RF-1S1N8A8V0 1614077 66 RF-1S1N8A8V0 161540 66 RF-1S1N8A8VDU 1614078 66 RF-1SS8AAC00 1607847 64 RF-1SS8AAD00 160716 64 RF-1SS8AAF00 160717 6 RF-1SS8AAK00 160718 6 RF-16SN8A800 16171 58 RF-16SN8A80DU 1617 58 RF-16SN8A8V0 1614095 66 RF-16SN8A8V0 1614096 66 RF-1P1N8AWA00 16076 60 RF-1P1N8AWB00 1607804 61 RF-1P1N8AWQ00 1607806 60 RF-1P1N8AWU00 161700 68 RF-1S1N8A900 160785 59 RF-1S1N8A900 160777 59 RF-1S1N8A90DU 160778 59 RF-1S1N8A9V0 161970 67 RF-1SS8AW400 1607848 61 RF-1SS8AWA00 160719 60 RF-1SS8AWB00 1607849 61 RF-1SS8AWQ00 1607850 60 RF-16SN8A8VDU 1614097 66 RF-16SN8A900 16179 59 RF-16SN8A900 16179 59 RF-16SN8A90DU 161794 59 RF-1P1N8AWV00 161701 68 RF-1P1S8A800 16077 58 RF-1P1S8A800 16078 58 RF-1P1S8A80DU 160740 58 RF-1S1N8A9V0 161971 67 RF-1S1N8A9VDU 16197 67 RF-1S1N8AA00 160779 6 RF-1S1N8AAC00 160787 64 RF-1SS8AWU00 16171 68 RF-1SS8AWV00 161714 68 RF-16P1N8A800 161715 58 RF-16P1N8A800 161716 58 RF-16SN8A9V0 161991 67 RF-16SN8A9V0 16199 67 RF-16SN8A9VDU 16199 67 RF-16SN8AA00 161795 6 RF-1P1S8A8V0 1614068 66 RF-1P1S8A8V0 1614069 66 RF-1P1S8A8VDU 1614070 66 RF-1P1S8A900 160741 59 RF-1S1N8AAD00 160780 64 RF-1S1N8AAF00 160781 6 RF-1S1N8AAK00 16078 6 RF-1S1N8AW400 160788 61 RF-16P1N8A80DU 161717 58 RF-16P1N8A8V0 1614087 66 RF-16P1N8A8V0 1614088 66 RF-16P1N8A8VDU 1614089 66 RF-16SN8AAC00 161796 64 RF-16SN8AAD00 161797 64 RF-16SN8AAF00 161798 6 RF-16SN8AAK00 161799 6 RF-1P1S8A900 16074 59 RF-1P1S8A90DU 16074 59 RF-1P1S8A9V0 161961 67 RF-1P1S8A9V0 16196 67 RF-1S1N8AWA00 16078 60 RF-1S1N8AWB00 160780 61 RF-1S1N8AWQ00 160781 60 RF-1S1N8AWU00 161707 68 RF-16P1N8A900 161757 59 RF-16P1N8A900 161758 59 RF-16P1N8A90DU 161759 59 RF-16P1N8A9V0 16198 67 RF-16SN8AW400 161800 61 RF-16SN8AWA00 161801 60 RF-16SN8AWB00 16180 61 RF-16SN8AWQ00 16180 60 RF-1P1S8A9VDU 16196 67 RF-1P1S8AA00 160744 6 RF-1P1S8AAC00 1607808 64 RF-1P1S8AAD00 160745 64 RF-1S1N8AWV00 161708 68 RF-1S1S8A800 160784 58 RF-1S1S8A800 160785 58 RF-1S1S8A80DU 160786 58 RF-16P1N8A9V0 16198 67 RF-16P1N8A9VDU 161984 67 RF-16P1N8AA00 161760 6 RF-16P1N8AAC00 161761 64 RF-16SN8AWU00 1617 68 RF-16SN8AWV00 16174 68 RF-17P1N8A800 16070 58 RF-17P1N8A800 16071 58 RF-1P1S8AAF00 160746 6 RF-1P1S8AAK00 160747 6 RF-1P1S8AW400 1607809 61 RF-1P1S8AWA00 160748 60 RF-1S1S8A8V0 1614079 66 RF-1S1S8A8V0 1614080 66 RF-1S1S8A8VDU 1614081 66 RF-1S1S8A900 160787 59 RF-16P1N8AAD00 16176 64 RF-16P1N8AAF00 16176 6 RF-16P1N8AAK00 161764 6 RF-16P1N8AW400 161765 61 RF-17P1N8A80DU 1607 58 RF-17P1N8A8V0 1614098 66 RF-17P1N8A8V0 1614099 66 RF-17P1N8A8VDU 1614100 66 RF-1P1S8AWB00 1607810 61 RF-1P1S8AWQ00 1607811 60 RF-1P1S8AWU00 16170 68 RF-1P1S8AWV00 16170 68 RF-1S1S8A900 160788 59 RF-1S1S8A90DU 160789 59 RF-1S1S8A9V0 16197 67 RF-1S1S8A9V0 161974 67 RF-16P1N8AWA00 161766 60 RF-16P1N8AWB00 161767 61 RF-16P1N8AWQ00 161768 60 RF-16P1N8AWU00 161718 68 RF-17P1N8A900 16074 59 RF-17P1N8A900 16075 59 RF-17P1N8A90DU 16076 59 RF-17P1N8A9V0 161994 67 RF-1PN8A800 160749 58 RF-1PN8A800 160751 58 RF-1PN8A80DU 16075 58 RF-1PN8A8V0 1614071 66 RF-1S1S8A9VDU 161975 67 RF-1S1S8AA00 160790 6 RF-1S1S8AAC00 160784 64 RF-1S1S8AAD00 160791 64 RF-16P1N8AWV00 161719 68 RF-16PN8A800 16170 58 RF-16PN8A800 16171 58 RF-16PN8A80DU 1617 58 RF-17P1N8A9V0 161995 67 RF-17P1N8A9VDU 161996 67 RF-17P1N8AA00 16077 6 RF-17P1N8AAC00 160785 64 CONINVERS 16

Index Alphabetical Page Page Page Page RF-17P1N8AAD00 16078 64 RF-17P1N8AAF00 160785 6 RF-17P1N8AAK00 1607854 6 RF-17P1N8AW400 1607857 61 RF-Z0007 161447 15 RM-00000001100 160706 17 RM-0000000100 160509 17 RM-00000007100 160707 17 SF-7EP1N8A9LDL 160558 10 SF-7EP1N8AA00 1607908 106 SF-7EP1N8AAC00 1607045 108 SF-7EP1N8AAD00 1605586 108 SL-5EP1N8A900 1607500 15 SL-5EPWN8AWA00 1615686 16 SL-5ES1N8A8001 1607501 14 SL-5ES1N8A800 160750 14 RF-17P1N8AWA00 1607860 60 RF-17P1N8AWB00 160786 61 RF-17P1N8AWQ00 1607866 60 RF-17P1N8AWU00 16175 68 RM-0000000700 160708 17 RM-0000000Z100 160709 17 RM-0000000Z00 160700 17 SF-7EP1N8AAF00 1607046 107 SF-7EP1N8AAK00 1607047 107 SF-7EP1N8AC0A1 1607048 110 SF-7EP1N8AC0A 1607049 110 SL-7EP1N8A9001 1607505 15 SL-7EP1N8A900 1607506 15 SL-7EPWN8AWA00 1615687 16 SL-7ES1N8A8001 1607507 14 RF-17P1N8AWV00 16176 68 RF-17PN8A800 16079 58 RF-17PN8A800 16070 58 RF-17PN8A80DU 16071 58 S SF-7EP1N8AC0A 1607050 110 SF-7EP1N8AC0DU 1607051 110 SF-7EP1N8ACLB1 160705 110 SF-7EP1N8ACLB 160705 110 SL-7ES1N8A800 1607508 14 SL-Z0005 160796 154 SL-Z0007 161484 149 SL-Z0008 161485 149 RF-17PN8A8V0 1614101 66 RF-17PN8A8V0 161541 66 RF-17PN8A8VDU 161410 66 RF-17PN8A900 1607 59 SC-Z19 1605456 155 SC-Z0 1605457 155 SC-Z 1605459 155 SF-10KP004 160755 71 SF-7EP1N8ACLB 1607054 110 SF-7EP1N8ACLB4 1607055 110 SF-7EP1N8ACLDL 1607056 110 SF-7EP1N8AF4DU 1605588 104 SL-Z0010 161487 149 SL-Z0011 161488 149 SL-Z001 161489 149 SL-Z001 161490 149 RF-17PN8A900 1607 59 RF-17PN8A90DU 16074 59 RF-17PN8A9V0 161997 67 RF-17PN8A9V0 161998 67 SF-10KS004 160756 71 SF-10KS010 1605481 71 SF-10KS0 160701 70 SF-10KS0 160758 70 SF-7EP1N8AWA00 1605589 105 SF-7EP1N8AWK00 1605591 105 SF-7ES1N8A80A1 1605595 10 SF-7ES1N8A80A 1605596 10 SL-Z0014 161491 149 SL-Z0015 16149 149 SL-Z0016 161448 15 SM-0KP005 160576 18 RF-17PN8A9VDU 161999 67 RF-17PN8AA00 16076 6 RF-17PN8AAC00 160787 64 RF-17PN8AAD00 16077 64 SF-10KS50 16070 70 SF-10KS60 160761 70 SF-0KP004 160776 11 SF-0KS010 1605491 11 SF-7ES1N8A80A 1605597 10 SF-7ES1N8A80DU 160560 10 SF-7ES1N8A8LB1 1605605 10 SF-7ES1N8A8LB 1605607 10 SM-0KP006 160578 18 SM-0KP007 160579 18 SM-0KP008 1605741 18 SM-6KP001 160574 18 RF-17PN8AAF00 1607875 6 RF-17PN8AAK00 1607878 6 RF-17PN8AW400 1607881 61 RF-17PN8AWA00 160788 60 SF-0KS50 (VPE150) 160704 11 SF-0KS60 (VPE4000) 160781 11 SF-5EE1N8AS000 160549 111 SF-5EP1N8A90A1 1605494 10 SF-7ES1N8A8LB 1605610 10 SF-7ES1N8A8LB4 1605614 10 SF-7ES1N8A8LDL 1605617 10 SF-7ES1N8AR4DU 160561 104 SM-6KP00 1605744 18 SM-6KP00 1605745 18 SM-6KP004 1605747 18 SM-6KP005 1605749 18 RF-17PN8AWB00 160788 61 RF-17PN8AWQ00 1607885 60 RF-17PN8AWU00 16177 68 RF-17PN8AWV00 16178 68 SF-5EP1N8A90A 1605496 10 SF-5EP1N8A90A 1605498 10 SF-5EP1N8A90DU 1605499 10 SF-5EP1N8A9LB1 1605505 10 SF-7ES1N8AY000 16056 109 SF-7ES1N8AYW00 160749 109 SF-7MP000 160566 11 SF-7MS000 160568 11 SM-6KP006 1605750 18 SM-6KP007 160575 18 SM-6KP008 1605754 18 SM-6KP009 1607057 18 RF-17S1N8A800 16078 58 RF-17S1N8A800 16079 58 RF-17S1N8A80DU 160740 58 RF-17S1N8A8V0 161410 66 SF-5EP1N8A9LB 1605507 10 SF-5EP1N8A9LB 1605508 10 SF-5EP1N8A9LB4 1605509 10 SF-5EP1N8A9LDL 1605510 10 SF-7NS000 160561 11 SF-7PP000 160564 11 SF-7PS000 160566 11 SF-7QP000 160569 11 SM-6KS001 1605756 18 SM-6KS00 1605758 18 SM-6KS00 1605760 18 SM-6KS004 160576 18 RF-17S1N8A8V0 1614104 66 RF-17S1N8A8VDU 1614105 66 RF-17S1N8A900 160741 59 RF-17S1N8A900 16074 59 SF-5EP1N8AA00 1607906 106 SF-5EP1N8AAC00 160705 108 SF-5EP1N8AAD00 160551 108 SF-5EP1N8AAF00 160706 107 SF-7QS000 160564 11 SF-7RP000 1605646 11 SF-Z000 1605655 145 SF-Z000 1605657 145 SM-5EE1N8AS000 1605767 16 SM-5EE1N8ASA00 1605768 16 SM-5EP1N8A900 1605769 1 SM-5EP1N8A900 1605771 1 RF-17S1N8A90DU 16074 59 RF-17S1N8A9V0 1614000 67 RF-17S1N8A9V0 1614001 67 RF-17S1N8A9VDU 161400 67 SF-5EP1N8AAK00 1605515 107 SF-5EP1N8AC0A1 1605516 110 SF-5EP1N8AC0A 160707 110 SF-5EP1N8AC0A 160708 110 SF-Z0004 1605661 145 SF-Z0007 1605665 145 SF-Z0008 1605668 145 SF-Z0009 160567 148 SM-5EP1N8A9004 160577 1 SM-5EP1N8A9005 1605775 1 SM-5EP1N8A9LS 16145 119 SM-5EP1N8A9LS 16146 119 RF-17S1N8AA00 160744 6 RF-17S1N8AAC00 1607887 64 RF-17S1N8AAD00 160745 64 RF-17S1N8AAF00 1607889 6 SF-5EP1N8AC0DU 1605517 110 SF-5EP1N8ACLB1 160709 110 SF-5EP1N8ACLB 1607040 110 SF-5EP1N8ACLB 1607041 110 SF-Z0011 1605675 147 SF-Z001 1605678 146 SF-Z001 1605681 148 SF-Z0014 1607446 148 SM-5EP1N8A9L4S 16147 119 SM-5EP1N8AC00 160578 14 SM-5EP1N8AC00 160578 14 SM-5EP1N8AC004 1605784 14 RF-17S1N8AAK00 1607890 6 RF-17S1N8AW400 1607891 61 RF-17S1N8AWA00 160789 60 RF-17S1N8AWB00 160789 61 SF-5EP1N8ACLB4 160704 110 SF-5EP1N8ACLDL 1605518 110 SF-5EP1N8AF4DU 1605519 104 SF-5EP1N8AWA00 160550 105 SF-Z0019 1607449 154 SF-Z00 1607450 145 SF-Z005 160745 149 SF-Z006 1607454 150 SM-5EP1N8AC005 1605785 14 SM-5EP1N8ACL0 1605786 14 SM-5EP1N8ACL0 1605787 14 SM-5EP1N8ACL04 1605788 14 RF-17S1N8AWQ00 1607894 60 RF-17S1N8AWU00 16179 68 RF-17S1N8AWV00 161740 68 RF-17SN8A800 160747 58 SF-5EP1N8AWK00 160704 105 SF-5ES1N8A80A1 160554 10 SF-5ES1N8A80A 160556 10 SF-5ES1N8A80A 160559 10 SF-Z007 1607455 15 SF-Z008 1607456 15 SF-Z009 1607458 144 SF-Z000 1607459 144 SM-5EP1N8ACL05 1605789 14 SM-5EP1N8AQ00 1605790 15 SM-5EP1N8AQ00 1605791 15 SM-5EP1N8AQ004 160579 15 RF-17SN8A800 160748 58 RF-17SN8A80DU 160749 58 RF-17SN8A8V0 1614106 66 RF-17SN8A8V0 1614107 66 SF-5ES1N8A80DU 16055 10 SF-5ES1N8A8LB1 160554 10 SF-5ES1N8A8LB 1605545 10 SF-5ES1N8A8LB 1605546 10 SF-Z001 1607461 144 SF-Z00 160746 144 SF-Z00 160746 144 SF-Z005 1607465 144 SM-5EP1N8AQ005 160579 15 SM-5EP1N8AQL0 1605794 15 SM-5EP1N8AQL0 1605795 15 SM-5EP1N8AQL04 1605796 15 RF-17SN8A8VDU 1614108 66 RF-17SN8A900 160750 59 RF-17SN8A900 160751 59 RF-17SN8A90DU 16075 59 SF-5ES1N8A8LB4 1605548 10 SF-5ES1N8A8LDL 1605549 10 SF-5ES1N8AR4DU 160555 104 SF-5ES1N8AY000 160708 109 SF-Z009 1607470 144 SF-Z0040 1607471 144 SF-Z0041 160747 144 SF-Z004 161666 150 SM-5EP1N8AQL05 1605797 15 SM-5EPWN8AA00 161516 10 SM-5EPWN8AAD00S 160797 10 SM-5EPWN8AWT00 161517 10 RF-17SN8A9V0 161400 67 RF-17SN8A9V0 1614004 67 RF-17SN8A9VDU 1614005 67 RF-17SN8AA00 16075 6 SF-5ES1N8AYW00 1607405 109 SF-6AP000 1605554 71 SF-6AS000 1605557 71 SF-6CP000 1605559 71 SF-Z004 1614571 151 SF-Z0047 1614689 144 SF-Z005 161541 144 SL-16KP010 1607909 17 SM-5ES1N8A800 160580 1 SM-5ES1N8A800 1605805 1 SM-5ES1N8A8004 1605807 1 SM-5ES1N8A8005 1605809 1 RF-17SN8AAC00 1607896 64 RF-17SN8AAD00 160754 64 RF-17SN8AAF00 1607898 6 RF-17SN8AAK00 1607899 6 SF-6CS000 160556 71 SF-6DP000 1607406 11 SF-6FS000 1605566 11 SF-7EE1N8AS000 1605567 111 SL-16KS010 1607956 17 SL-1CKP010 1607911 17 SL-1CKP00 160791 17 SL-1CKP00 160791 17 SM-5ES1N8A8LS 16148 118 SM-5ES1N8A8LS 16149 118 SM-5ES1N8A8L4S 16140 118 SM-5ES1N8A8S 161518 1 RF-17SN8AW400 1607900 61 RF-17SN8AWA00 1607901 60 RF-17SN8AWB00 160790 61 RF-17SN8AWQ00 160790 60 SF-7EP1N8A90A1 1605568 10 SF-7EP1N8A90A 1605570 10 SF-7EP1N8A90A 1605571 10 SF-7EP1N8A90DU 1605575 10 SL-1CKP040 1607914 17 SL-1CKP050 1607915 17 SL-1CKS010 1607916 17 SL-1CKS00 1607917 17 SM-5ES1N8A8S 161519 1 SM-5ES1N8A8S4 16150 1 SM-5ES1N8AY000 16058 17 SM-5ES1N8AY000S 16154 11 RF-17SN8AWU00 161741 68 RF-17SN8AWV00 16174 68 RF-Z0001 1607904 15 RF-Z000 1607905 15 SF-7EP1N8A9LB1 1605578 10 SF-7EP1N8A9LB 1605580 10 SF-7EP1N8A9LB 1605581 10 SF-7EP1N8A9LB4 160558 10 SL-1CKS00 1607918 17 SL-1CKS040 1607919 17 SL-1CKS050 160790 17 SL-5EP1N8A9001 1607499 15 SM-5ES1N8AYW00 16075 17 SM-5ES1N8AYW00S 16155 11 SM-7EE1N8AS000 160584 16 SM-7EE1N8ASA00 160585 16 164 CONINVERS

Index Alphabetical Page Page Page Page SM-7EP1N8A900 160706 1 SM-7EP1N8A900 160586 1 SM-7EP1N8A9004 1607064 1 SM-7EP1N8A9005 1607065 1 ST-0KP010 1607655 97 ST-0KP00 1607656 97 ST-0KS010 1607657 97 ST-0KS00 1607658 97 ST-6ES1N8A800 161575 91 ST-6ES1N8A800S 161576 90 ST-6ES1N8A800 161577 91 ST-6ES1N8A800S 161578 90 ST-Z0006 1607776 154 ST-Z0007 1607777 154 ST-Z0010 160798 145 ST-Z0011 160799 145 SM-7EP1N8A9LS 16141 119 SM-7EP1N8A9LS 1614 119 SM-7EP1N8A9L4S 1614 119 SM-7EP1N8AC00 160580 14 ST-EP1N8A6100S 161544 95 ST-EP1N8A800 1607661 91 ST-EP1N8A800S 160766 90 ST-EP1N8A800 160766 91 ST-6ES1N8A8004 161579 91 ST-6ES1N8A8004S 161580 90 ST-6ES1N8A900S 16158 9 ST-6ES1N8A900S 16158 9 ST-Z001 161667 15 SM-7EP1N8AC00 160581 14 SM-7EP1N8AC004 16058 14 SM-7EP1N8AC005 16058 14 SM-7EP1N8ACL0 160584 14 ST-EP1N8A800S 1607665 90 ST-EP1N8A8004 1607666 91 ST-EP1N8A8004S 1607667 90 ST-EP1N8A900S 1607669 9 ST-6ES1N8A9004S 161584 9 ST-6ES1N8AAC00S 161585 94 ST-6ES1N8AAD00S 161586 94 ST-6ES1N8AH100S 161587 95 T SM-7EP1N8ACL0 160585 14 SM-7EP1N8ACL04 160586 14 SM-7EP1N8ACL05 160587 14 SM-7EP1N8AQ00 160588 15 ST-EP1N8A900S 1607670 9 ST-EP1N8A9004S 1607671 9 ST-EP1N8AAC00S 160767 94 ST-EP1N8AAD00S 160767 94 ST-6ES1N8AW400S 161588 9 ST-6ES1N8AWQ00S 161589 9 ST-7EP1N8A6100S 161590 95 ST-7EP1N8A800 16077 91 TU-00000004100 1605881 9 TU-0000000500 1605885 9 TU-00000008UDU 1605886 8 TU-00000009UDU 1605888 8 SM-7EP1N8AQ00 160589 15 SM-7EP1N8AQ004 1605840 15 SM-7EP1N8AQ005 1605841 15 SM-7EP1N8AQL0 160584 15 ST-EP1N8AH100S 161545 95 ST-EP1N8AW400S 1607674 9 ST-EP1N8AWQ00S 1607675 9 ST-ES1N8A6100S 161546 95 ST-7EP1N8A800S 160774 90 ST-7EP1N8A800 160775 91 ST-7EP1N8A800S 160776 90 ST-7EP1N8A8004 160777 91 TU-0000000TUDU 1605891 8 TU-0000000WB00 160589 9 TU-Z00 1607778 154 TU-Z00 16060 154 SM-7EP1N8AQL0 160584 15 SM-7EP1N8AQL04 1605844 15 SM-7EP1N8AQL05 1605845 15 SM-7EPWN8AA00 16156 10 ST-ES1N8A800 1607679 91 ST-ES1N8A800S 1607681 90 ST-ES1N8A800 160768 91 ST-ES1N8A800S 160768 90 ST-7EP1N8A8004S 160778 90 ST-7EP1N8A900S 1607740 9 ST-7EP1N8A900S 1607741 9 ST-7EP1N8A9004S 160774 9 TU-Z17 160605 155 SM-7EPWN8AAD00S 160791 10 SM-7EPWN8AWT00 16157 10 SM-7ES1N8A800 1605851 1 SM-7ES1N8A800 160585 1 ST-ES1N8A8004 1607684 91 ST-ES1N8A8004S 1607685 90 ST-ES1N8A900S 1607687 9 ST-ES1N8A900S 1607688 9 ST-7EP1N8AAC00S 160774 94 ST-7EP1N8AAD00S 1607744 94 ST-7EP1N8AH100S 161591 95 ST-7EP1N8AW400S 1607746 9 U SM-7ES1N8A8004 1605854 1 SM-7ES1N8A8005 1605856 1 SM-7ES1N8A8LS 16144 118 SM-7ES1N8A8LS 16145 118 ST-ES1N8A9004S 1607689 9 ST-ES1N8AAC00S 1607690 94 ST-ES1N8AAD00S 1607691 94 ST-ES1N8AH100S 161547 95 ST-7EP1N8AWQ00S 1607747 9 ST-7ES1N8A6100S 16159 95 ST-7ES1N8A800 160775 91 ST-7ES1N8A800S 160775 90 UC-000000080DU 160600 18 UC-000000090DU 1606040 19 UC-0000000FDU 1607069 19 UC-0000000FNDU 1606046 19 SM-7ES1N8A8L4S 16146 118 SM-7ES1N8A8S 16158 1 SM-7ES1N8A8S 16159 1 SM-7ES1N8A8S4 16150 1 ST-ES1N8AW400S 160769 9 ST-ES1N8AWQ00S 1607694 9 ST-5EP1N8A6100S 161548 95 ST-5EP1N8A800 1607697 91 ST-7ES1N8A800 1607755 91 ST-7ES1N8A800S 1607756 90 ST-7ES1N8A8004 1607758 91 ST-7ES1N8A8004S 1607759 90 UC-0000000NDU 1606047 18 UC-0000000NNDU 1606050 18 UC-0000000Q0DU 160605 19 UC-0000000QDU 1607070 19 SM-7ES1N8AY000 1605865 17 SM-7ES1N8AY000S 16154 11 SM-7ES1N8AYW00 160754 17 SM-7ES1N8AYW00S 16155 11 ST-5EP1N8A800S 1607698 90 ST-5EP1N8A800 1607699 91 ST-5EP1N8A800S 1607700 90 ST-5EP1N8A8004 1607701 91 ST-7ES1N8A900S 160776 9 ST-7ES1N8A900S 1607764 9 ST-7ES1N8A9004S 1607765 9 ST-7ES1N8AAC00S 1607766 94 UC-0000000QNDU 160708 19 UC-0000000RDU 1606058 18 UC-0000000RNDU 1606061 18 UC-0000000T0DU 1606065 18 SM-Z0001 1605866 154 SM-Z000 160795 15 SM-Z0004 160797 15 SM-Z001 161449 15 ST-5EP1N8A8004S 160770 90 ST-5EP1N8A900S 1607705 9 ST-5EP1N8A900S 1607706 9 ST-5EP1N8A9004S 1607707 9 ST-7ES1N8AAD00S 1607767 94 ST-7ES1N8AH100S 16159 95 ST-7ES1N8AW400S 1607768 9 ST-7ES1N8AWQ00S 1607769 9 UC-Z09 160684 14 UC-Z4 16199 14 UC-Z44 160687 14 UC-Z46 160689 14 ST-06KP010 1607577 5 ST-06KP00 1607578 5 ST-06KP00 1607579 5 ST-06KS010 1607580 5 ST-5EP1N8AAC00S 1607708 94 ST-5EP1N8AAD00S 1607709 94 ST-5EP1N8AH100S 161549 95 ST-5EP1N8AW400S 1607710 9 ST-8EP1N8A6100S 161595 95 ST-8EP1N8A800 161598 91 ST-8EP1N8A800S 161599 90 ST-8EP1N8A800 161600 91 UC-Z48 1606841 14 UC-Z49 160684 14 UC-Z51 1606846 14 ST-06KS00 1607581 5 ST-06KS00 160758 5 ST-17P1N8A6100S 161540 51 ST-17P1N8A800 160761 47 ST-5EP1N8AWQ00S 1607711 9 ST-5ES1N8A6100S 161550 95 ST-5ES1N8A800 1607714 91 ST-5ES1N8A800S 1607715 90 ST-8EP1N8A800S 161601 90 ST-8EP1N8A8004 16160 91 ST-8EP1N8A8004S 16160 90 ST-8EP1N8A900S 161605 9 ST-17P1N8A800S 16076 46 ST-17P1N8A800 160764 47 ST-17P1N8A800S 160765 46 ST-17P1N8A8004 160766 47 ST-5ES1N8A800 1607717 91 ST-5ES1N8A800S 1607718 90 ST-5ES1N8A8004 1607719 91 ST-5ES1N8A8004S 160770 90 ST-8EP1N8A900S 161606 9 ST-8EP1N8A9004S 161607 9 ST-8EP1N8AAC00S 161608 94 ST-8EP1N8AAD00S 161609 94 ST-17P1N8A8004S 160767 46 ST-17P1N8A900S 160769 48 ST-17P1N8A900S 160760 48 ST-17P1N8A9004S 160761 48 ST-5ES1N8A900S 16077 9 ST-5ES1N8A900S 16077 9 ST-5ES1N8A9004S 160774 9 ST-5ES1N8AAC00S 160775 94 ST-8EP1N8AH100S 161610 95 ST-8EP1N8AW400S 161611 9 ST-8EP1N8AWQ00S 16161 9 ST-8ES1N8A6100S 161614 95 ST-17P1N8AAC00S 16076 50 ST-17P1N8AAD00S 16076 50 ST-17P1N8AH100S 161541 51 ST-17P1N8AW400S 160764 49 ST-5ES1N8AAD00S 160776 94 ST-5ES1N8AH100S 161551 95 ST-5ES1N8AW400S 160777 9 ST-5ES1N8AWQ00S 160778 9 ST-8ES1N8A800 161617 91 ST-8ES1N8A800S 161618 90 ST-8ES1N8A800 161619 91 ST-8ES1N8A800S 16160 90 ST-17P1N8AWQ00S 160766 49 ST-17S1N8A6100S 16154 51 ST-17S1N8A800 160769 47 ST-17S1N8A800S 1607640 46 ST-6EP1N8A6100S 16155 95 ST-6EP1N8A800 161556 91 ST-6EP1N8A800S 161557 90 ST-6EP1N8A800 161558 91 ST-8ES1N8A8004 16161 91 ST-8ES1N8A8004S 1616 90 ST-8ES1N8A900S 16164 9 ST-8ES1N8A900S 16165 9 ST-17S1N8A800 1607641 47 ST-17S1N8A800S 160764 46 ST-17S1N8A8004 160764 47 ST-17S1N8A8004S 1607644 46 ST-6EP1N8A800S 161559 90 ST-6EP1N8A8004 161560 91 ST-6EP1N8A8004S 161561 90 ST-6EP1N8A900S 16156 9 ST-8ES1N8A9004S 16166 9 ST-8ES1N8AAC00S 16167 94 ST-8ES1N8AAD00S 16168 94 ST-8ES1N8AH100S 16169 95 ST-17S1N8A900S 1607646 48 ST-17S1N8A900S 1607647 48 ST-17S1N8A9004S 1607649 48 ST-17S1N8AAC00S 1607650 50 ST-6EP1N8A900S 161564 9 ST-6EP1N8A9004S 161565 9 ST-6EP1N8AAC00S 161566 94 ST-6EP1N8AAD00S 161567 94 ST-8ES1N8AW400S 16160 9 ST-8ES1N8AWQ00S 16161 9 ST-E015151 16181 51 ST-Z0001 1607770 15 ST-17S1N8AAD00S 160765 50 ST-17S1N8AH100S 16154 51 ST-17S1N8AW400S 160765 49 ST-17S1N8AWQ00S 1607654 49 ST-6EP1N8AH100S 161568 95 ST-6EP1N8AW400S 161569 9 ST-6EP1N8AWQ00S 161570 9 ST-6ES1N8A6100S 16157 95 ST-Z000 1607771 15 ST-Z000 160777 15 ST-Z0004 160777 15 ST-Z0005 1607775 15 CONINVERS 165

Index Numerical Page Page Page Page 159076 HC-6P1N100 77 159080 HC-6P1N1400 79 15908 HC-6P1N1600 76 159085 HC-6P1N180DU 74 15907 RC-06P1N10000 15995 RC-06P1N0000 6 15941 RC-06P1N8A0000 4 15955 RC-06P1N8B0000 16095 RC-17S1NC0000 7 1608 RC-17SN10000 16048 RC-19P1N10000 160749 RC-19S1N10000 1604491 RC-Z45 4 1604495 RC-Z46 4 1604497 RC-Z47 4 1604500 RC-Z49 4 159089 HC-6P1N190DU 75 15900 HC-6P1N1WA00 78 159007 HC-6P1N400 79 159011 HC-6P1N400 79 15951 RC-06P1NA0000 7 159555 RC-06P1NS0000 159645 RC-06S1N10000 159400 RC-06S1N0000 6 160066 RC-1RP1NRA0000 4 160144 RC-1RP1NRM0000 1601 RC-1RS1NRA0000 4 16005 RC-1RS1NRM0000 160450 RC-Z40 4 1604505 RC-Z41 4 1604506 RC-Z4 4 1604509 RC-Z44 4 15901 HC-6P1NRA00 77 159014 HC-6P1NRA400 79 159016 HC-6P1NRA600 76 159019 HC-6P1NRA80DU 74 159401 RC-06S1N8A0000 4 1594145 RC-06S1N8B0000 1594149 RC-06S1NA0000 7 1594164 RC-06S1NS0000 1601 RC-P000 5 1607 RC-S000 5 160505 RC-5AP000 5 160509 RC-5AS000 5 1604511 RC-Z45 4 160451 RC-Z46 4 1604516 RC-Z47 4 1604517 RC-Z48 4 15901 HC-6P1NRA90DU 75 1590 HC-6P1NRAWA00 78 15908 HC-6P1NT00 77 159045 HC-6S1N100 77 15946 RC-07P1N10000 159445 RC-07P1N8A0000 4 1594497 RC-07P1N8B0000 1594515 RC-07P1NS0000 16051 RC-5CP000 5 160517 RC-5CS000 5 16058 RC-6P1N10000 16067 RC-6P1N0000 6 1604519 RC-Z49 4 160450 RC-Z440 4 16045 RC-Z441 4 160454 RC-Z44 4 159047 HC-6S1N1400 79 159049 HC-6S1N1600 76 159054 HC-6S1N180DU 74 159057 HC-6S1N190DU 75 1594558 RC-07S1N10000 159471 RC-07S1N8A0000 4 1594786 RC-07S1N8B0000 1594801 RC-07S1NS0000 160640 RC-6P1N0000 7 160645 RC-6P1NA0000 7 160651 RC-6P1NC0000 7 160668 RC-6S1N10000 160456 RC-Z44 4 160459 RC-Z444 4 16045 RC-Z445 4 160454 RC-Z446 4 15907 HC-6S1N1WA00 78 159081 HC-6S1NRA00 77 15908 HC-6S1NRA400 79 15908 HC-6S1NRA600 76 1594887 RC-09P1N10000 159575 RC-09P1N8A0000 4 1595501 RC-09P1N8C0000 1595507 RC-09P1NA0000 7 160764 RC-6S1N0000 6 160767 RC-6S1N0000 7 160774 RC-6S1NA0000 7 160778 RC-6S1NC0000 7 160456 RC-Z448 4 160459 RC-Z450 4 1604541 RC-Z451 4 1604545 RC-Z45 4 159088 HC-6S1NRA90DU 75 159040 HC-6S1NRAWA00 78 1590407 HC-8P1N100 77 1590408 HC-8P1N1400 79 1595519 RC-09P1NC0000 7 15955 RC-09P1NS0000 1595600 RC-09PN10000 1595744 RC-09PN8A0000 4 160797 RC-67P000 80 160800 RC-67S000 80 16080 RC-6EP000 5 160805 RC-6ES000 5 1604547 RC-Z454 4 1604549 RC-Z455 4 1604558 RC-Z46 5 1604561 RC-Z46 5 1590409 HC-8P1N1600 76 159041 HC-8P1N180DU 74 1590415 HC-8P1N190DU 75 1590418 HC-8P1N1WA00 78 1595758 RC-09PN8C0000 1595791 RC-09S1N10000 159679 RC-09S1N0000 6 15960 RC-09S1N8A0000 4 160808 RC-6FP000 5 160811 RC-6FS000 5 160814 RC-6KP000 80 160816 RC-6KS000 80 160509 RM-0000000100 17 1605456 SC-Z19 155 1605457 SC-Z0 155 1605459 SC-Z 155 15904 HC-8P1NT400 79 159047 HC-8S1N100 77 159048 HC-8S1N1600 76 15904 HC-8S1N180DU 74 1596417 RC-09S1N8C0000 159641 RC-09S1NA0000 7 159644 RC-09S1NC0000 7 1596456 RC-09S1NS0000 160819 RC-6LP000 5 1608 RC-6LS000 5 16086 RC-6MP000 80 16089 RC-6MS000 80 1605481 SF-10KS010 71 1605491 SF-0KS010 11 160549 SF-5EE1N8AS000 111 1605494 SF-5EP1N8A90A1 10 159044 HC-8S1N190DU 75 159049 HC-8S1N1WA00 78 1590454 HC-ARP1NRA00 77 1590458 HC-ARP1NRAWA00 78 159655 RC-09SN10000 1596706 RC-09SN8A0000 4 159674 RC-09SN8C0000 1596856 RC-1P1N10000 16086 RC-6RP000 80 160846 RC-6RS000 80 160961 RC-E0146 141 160406 RC-Z06 14 1605496 SF-5EP1N8A90A 10 1605498 SF-5EP1N8A90A 10 1605499 SF-5EP1N8A90DU 10 1605505 SF-5EP1N8A9LB1 10 1590467 HC-ARS1NRA00 77 1590491 HC-Z91 155 159049 HC-Z9 154 159049 HC-Z9 154 159740 RC-1P1N0000 6 1597464 RC-1P1N8A0000 4 159765 RC-1P1N8D0000 1597641 RC-1P1N8E0000 16041 RC-Z051 160416 RC-Z05 160418 RC-Z05 1604 RC-Z058 154 1605507 SF-5EP1N8A9LB 10 1605508 SF-5EP1N8A9LB 10 1605509 SF-5EP1N8A9LB4 10 1605510 SF-5EP1N8A9LDL 10 1590498 HC-Z00 76 15900 NC-0000000KSFZ 16 159490 PV-08P1N16100 41 159491 PV-08P1N1HG00 41 159764 RC-1P1NA0000 7 1597660 RC-1P1NC0000 7 159786 RC-1P000 5 1597867 RC-1PN10000 16045 RC-Z059 154 16048 RC-Z06 155 16046 RC-Z068 155 16044 RC-Z091 160551 SF-5EP1N8AAD00 108 1605515 SF-5EP1N8AAK00 107 1605516 SF-5EP1N8AC0A1 110 1605517 SF-5EP1N8AC0DU 110 15949 PV-10P1N16100 41 159494 PV-10P1N1HG00 41 159496 PV-1P1N16100 41 159497 PV-1P1N1HG00 41 1598196 RC-1PN8A0000 4 15989 RC-1PN8D0000 159895 RC-1PN8E0000 1598466 RC-1S1N10000 160445 RC-Z09 160447 RC-Z09 160449 RC-Z096 141 160455 RC-Z099 141 1605518 SF-5EP1N8ACLDL 110 1605519 SF-5EP1N8AF4DU 104 160550 SF-5EP1N8AWA00 105 160554 SF-5ES1N8A80A1 10 159499 PV-14P1N16100 41 159500 PV-14P1N1HG00 41 159501 PV-14P1NHG00 41 15955 RC-00000001100 17 1599079 RC-1S1N0000 6 159918 RC-1S1N8A0000 4 15994 RC-1S1N8D0000 159948 RC-1S1N8E0000 160460 RC-Z104 155 160467 RC-Z10 140 16044 RC-Z191 16048 RC-Z196 160556 SF-5ES1N8A80A 10 160559 SF-5ES1N8A80A 10 16055 SF-5ES1N8A80DU 10 160554 SF-5ES1N8A8LB1 10 15959 RC-0000000100 17 159546 RC-0000000100 17 159574 RC-000000000 0 159589 RC-0000000400 159967 RC-1S1NC0000 7 1599600 RC-1S000 5 1599614 RC-1SN10000 1600076 RC-1SN8A0000 4 160445 RC-Z0 16046 RC-Z1 4 160464 RC-Z 4 160468 RC-Z5 4 1605545 SF-5ES1N8A8LB 10 1605546 SF-5ES1N8A8LB 10 1605548 SF-5ES1N8A8LB4 10 1605549 SF-5ES1N8A8LDL 10 159599 RC-0000000500 159604 RC-00000006100 1 159618 RC-00000007100 17 15961 RC-0000000700 17 16001 RC-1SN8D0000 16004 RC-1SN8E0000 1600417 RC-1041 51 1600509 RC-16P1N10000 160470 RC-Z7 4 16047 RC-Z8 4 160475 RC-Z9 4 1604409 RC-Z74 140 160555 SF-5ES1N8AR4DU 104 1605554 SF-6AP000 71 1605557 SF-6AS000 71 1605559 SF-6CP000 71 15966 RC-0000000700 17 159680 RC-000000080FZ 16 159750 RC-000000090FZ 16 159777 RC-0000000AD00 1 1600707 RC-16P1N8A0000 4 1600747 RC-16P1N8D0000 1600816 RC-16S1N10000 1601058 RC-16S1N8A0000 4 1604417 RC-Z90 141 160444 RC-Z8 141 1604449 RC-Z91 4 160445 RC-Z9 4 160556 SF-6CS000 71 1605566 SF-6FS000 11 1605567 SF-7EE1N8AS000 111 1605568 SF-7EP1N8A90A1 10 159781 RC-0000000BFZ 0 159790 RC-0000000C0FZ 15981 RC-0000000E000 1598 RC-0000000H000 1601116 RC-16S1N8D0000 160119 RC-17P1N10000 1601451 RC-17P1N8A0000 4 160164 RC-17P1N8D0000 1604454 RC-Z9 4 1604456 RC-Z94 4 1604458 RC-Z95 4 1604460 RC-Z96 4 1605570 SF-7EP1N8A90A 10 1605571 SF-7EP1N8A90A 10 1605575 SF-7EP1N8A90DU 10 1605578 SF-7EP1N8A9LB1 10 159865 RC-0000000K0FZ 16 159899 RC-0000000M0FZ 16 15994 RC-0000000Q0FZ 15999 RC-0000000T0FZ 16 160166 RC-17P1N8E0000 160168 RC-17P1NA0000 7 1601647 RC-17P1NC0000 7 160177 RC-17PN10000 160446 RC-Z98 4 1604465 RC-Z99 4 1604468 RC-Z401 4 1604470 RC-Z40 4 1605580 SF-7EP1N8A9LB 10 1605581 SF-7EP1N8A9LB 10 160558 SF-7EP1N8A9LB4 10 160558 SF-7EP1N8A9LDL 10 15901 RC-0000000WQ00 0 15907 RC-0000000Z100 17 159040 RC-0000000Z00 17 159044 RC-0000000Z00 17 1601799 RC-17S1N10000 16008 RC-17S1N8A0000 4 1608 RC-17S1N8D0000 16084 RC-17S1N8E0000 160447 RC-Z40 4 1604474 RC-Z404 4 1604479 RC-Z409 1604481 RC-Z410 1605586 SF-7EP1N8AAD00 108 1605588 SF-7EP1N8AF4DU 104 1605589 SF-7EP1N8AWA00 105 1605591 SF-7EP1N8AWK00 105 166 CONINVERS

Index Numerical Page Page Page Page 1605595 SF-7ES1N8A80A1 10 1605596 SF-7ES1N8A80A 10 1605597 SF-7ES1N8A80A 10 160560 SF-7ES1N8A80DU 10 160586 SM-7EP1N8ACL04 14 160587 SM-7EP1N8ACL05 14 160588 SM-7EP1N8AQ00 15 160589 SM-7EP1N8AQ00 15 160706 SF-5EP1N8AAF00 107 160707 SF-5EP1N8AC0A 110 160708 SF-5EP1N8AC0A 110 160709 SF-5EP1N8ACLB1 110 160781 RF-1S1N8AAF00 6 16078 RF-1S1N8AAK00 6 16078 RF-1S1N8AWA00 60 160784 RF-1S1S8A800 58 1605605 SF-7ES1N8A8LB1 10 1605607 SF-7ES1N8A8LB 10 1605610 SF-7ES1N8A8LB 10 1605614 SF-7ES1N8A8LB4 10 1605840 SM-7EP1N8AQ004 15 1605841 SM-7EP1N8AQ005 15 160584 SM-7EP1N8AQL0 15 160584 SM-7EP1N8AQL0 15 1607040 SF-5EP1N8ACLB 110 1607041 SF-5EP1N8ACLB 110 160704 SF-5EP1N8ACLB4 110 160704 SF-5EP1N8AWK00 105 160785 RF-1S1S8A800 58 160786 RF-1S1S8A80DU 58 160787 RF-1S1S8A900 59 160788 RF-1S1S8A900 59 1605617 SF-7ES1N8A8LDL 10 160561 SF-7ES1N8AR4DU 104 16056 SF-7ES1N8AY000 109 160566 SF-7MP000 11 1605844 SM-7EP1N8AQL04 15 1605845 SM-7EP1N8AQL05 15 1605851 SM-7ES1N8A800 1 160585 SM-7ES1N8A800 1 1607045 SF-7EP1N8AAC00 108 1607046 SF-7EP1N8AAF00 107 1607047 SF-7EP1N8AAK00 107 1607048 SF-7EP1N8AC0A1 110 160789 RF-1S1S8A90DU 59 160790 RF-1S1S8AA00 6 160791 RF-1S1S8AAD00 64 16079 RF-1S1S8AAF00 6 160568 SF-7MS000 11 160561 SF-7NS000 11 160564 SF-7PP000 11 160566 SF-7PS000 11 1605854 SM-7ES1N8A8004 1 1605856 SM-7ES1N8A8005 1 1605865 SM-7ES1N8AY000 17 1605866 SM-Z0001 154 1607049 SF-7EP1N8AC0A 110 1607050 SF-7EP1N8AC0A 110 1607051 SF-7EP1N8AC0DU 110 160705 SF-7EP1N8ACLB1 110 16079 RF-1S1S8AAK00 6 160794 RF-1S1S8AWA00 60 160795 RF-1SN8A800 58 160796 RF-1SN8A800 58 160569 SF-7QP000 11 160564 SF-7QS000 11 1605646 SF-7RP000 11 1605655 SF-Z000 145 1605881 TU-00000004100 9 1605885 TU-0000000500 9 1605886 TU-00000008UDU 8 1605888 TU-00000009UDU 8 160705 SF-7EP1N8ACLB 110 1607054 SF-7EP1N8ACLB 110 1607055 SF-7EP1N8ACLB4 110 1607056 SF-7EP1N8ACLDL 110 160797 RF-1SN8A80DU 58 160700 RF-1SN8A900 59 160701 RF-1SN8A900 59 16070 RF-1SN8A90DU 59 1605657 SF-Z000 145 1605661 SF-Z0004 145 1605665 SF-Z0007 145 1605668 SF-Z0008 145 1605891 TU-0000000TUDU 8 160589 TU-0000000WB00 9 16060 TU-Z00 154 160605 TU-Z17 155 1607057 SM-6KP009 18 160706 SM-7EP1N8A900 1 1607064 SM-7EP1N8A9004 1 1607065 SM-7EP1N8A9005 1 16070 RF-1SN8AA00 6 160704 RF-1SN8AAD00 64 160705 RF-1SN8AAF00 6 160706 RF-1SN8AAK00 6 160567 SF-Z0009 148 1605675 SF-Z0011 147 1605678 SF-Z001 146 1605681 SF-Z001 148 160600 UC-000000080DU 18 1606040 UC-000000090DU 19 1606046 UC-0000000FNDU 19 1606047 UC-0000000NDU 18 1607069 UC-0000000FDU 19 1607070 UC-0000000QDU 19 160708 SF-5ES1N8AY000 109 160708 UC-0000000QNDU 19 160707 RF-1SN8AWA00 60 160708 RF-1SS8A800 58 160709 RF-1SS8A800 58 160710 RF-1SS8A80DU 58 160576 SM-0KP005 18 160578 SM-0KP006 18 160579 SM-0KP007 18 1605741 SM-0KP008 18 1606050 UC-0000000NNDU 18 160605 UC-0000000Q0DU 19 1606058 UC-0000000RDU 18 1606061 UC-0000000RNDU 18 160719 HC-8S1N1400 79 16075 RF-1P1N8A800 58 16077 RF-1P1N8A800 58 16078 RF-1P1N8A80DU 58 16071 RF-1SS8A900 59 16071 RF-1SS8A900 59 160714 RF-1SS8A90DU 59 160715 RF-1SS8AA00 6 160574 SM-6KP001 18 1605744 SM-6KP00 18 1605745 SM-6KP00 18 1605747 SM-6KP004 18 1606065 UC-0000000T0DU 18 160684 UC-Z09 14 160687 UC-Z44 14 160689 UC-Z46 14 16079 RF-1P1N8A900 59 16070 RF-1P1N8A900 59 16071 RF-1P1N8A90DU 59 1607 RF-1P1N8AA00 6 160716 RF-1SS8AAD00 64 160717 RF-1SS8AAF00 6 160718 RF-1SS8AAK00 6 160719 RF-1SS8AWA00 60 1605749 SM-6KP005 18 1605750 SM-6KP006 18 160575 SM-6KP007 18 1605754 SM-6KP008 18 1606841 UC-Z48 14 160684 UC-Z49 14 1606846 UC-Z51 14 1606991 RC-06P1N0000 7 1607 RF-1P1N8AAD00 64 16074 RF-1P1N8AAF00 6 16075 RF-1P1N8AAK00 6 16076 RF-1P1N8AWA00 60 16070 RF-17P1N8A800 58 16071 RF-17P1N8A800 58 1607 RF-17P1N8A80DU 58 16074 RF-17P1N8A900 59 1605756 SM-6KS001 18 1605758 SM-6KS00 18 1605760 SM-6KS00 18 160576 SM-6KS004 18 160699 RC-06P1N8K0000 160699 RC-06P1NC0000 7 1606994 RC-06S1N0000 7 1606995 RC-06S1N8K0000 16077 RF-1P1S8A800 58 16078 RF-1P1S8A800 58 160740 RF-1P1S8A80DU 58 160741 RF-1P1S8A900 59 16075 RF-17P1N8A900 59 16076 RF-17P1N8A90DU 59 16077 RF-17P1N8AA00 6 16078 RF-17P1N8AAD00 64 1605767 SM-5EE1N8AS000 16 1605768 SM-5EE1N8ASA00 16 1605769 SM-5EP1N8A900 1 1605771 SM-5EP1N8A900 1 1606996 RC-06S1NC0000 7 1606997 RC-07P1N8K0000 1606998 RC-07S1N8K0000 1606999 RC-09P1N0000 6 16074 RF-1P1S8A900 59 16074 RF-1P1S8A90DU 59 160744 RF-1P1S8AA00 6 160745 RF-1P1S8AAD00 64 16079 RF-17PN8A800 58 16070 RF-17PN8A800 58 16071 RF-17PN8A80DU 58 1607 RF-17PN8A900 59 160577 SM-5EP1N8A9004 1 1605775 SM-5EP1N8A9005 1 160578 SM-5EP1N8AC00 14 160578 SM-5EP1N8AC00 14 1607000 RC-09P1N0000 7 1607001 RC-09P1N8L0000 160700 RC-09PN8L0000 160700 RC-09S1N0000 7 160746 RF-1P1S8AAF00 6 160747 RF-1P1S8AAK00 6 160748 RF-1P1S8AWA00 60 160749 RF-1PN8A800 58 1607 RF-17PN8A900 59 16074 RF-17PN8A90DU 59 16076 RF-17PN8AA00 6 16077 RF-17PN8AAD00 64 1605784 SM-5EP1N8AC004 14 1605785 SM-5EP1N8AC005 14 1605786 SM-5EP1N8ACL0 14 1605787 SM-5EP1N8ACL0 14 1607004 RC-09S1N8L0000 1607005 RC-09SN8L0000 1607006 RC-1P1N0000 7 1607007 RC-1S1N0000 7 160751 RF-1PN8A800 58 16075 RF-1PN8A80DU 58 16075 RF-1PN8A900 59 160754 RF-1PN8A900 59 16078 RF-17S1N8A800 58 16079 RF-17S1N8A800 58 160740 RF-17S1N8A80DU 58 160741 RF-17S1N8A900 59 1605788 SM-5EP1N8ACL04 14 1605789 SM-5EP1N8ACL05 14 1605790 SM-5EP1N8AQ00 15 1605791 SM-5EP1N8AQ00 15 1607008 RC-1S1NA0000 7 1607009 RC-17P1N0000 6 1607010 RC-17P1N0000 7 1607011 RC-17S1N0000 6 160755 RF-1PN8A90DU 59 160756 RF-1PN8AA00 6 160757 RF-1PN8AAD00 64 160758 RF-1PN8AAF00 6 16074 RF-17S1N8A900 59 16074 RF-17S1N8A90DU 59 160744 RF-17S1N8AA00 6 160745 RF-17S1N8AAD00 64 160579 SM-5EP1N8AQ004 15 160579 SM-5EP1N8AQ005 15 1605794 SM-5EP1N8AQL0 15 1605795 SM-5EP1N8AQL0 15 160701 RC-17S1N0000 7 1607014 RC-17S1NA0000 7 1607015 RC-Z406 1607016 RC-Z407 160759 RF-1PN8AAK00 6 160760 RF-1PN8AWA00 60 160761 RF-1PS8A800 58 16076 RF-1PS8A800 58 160747 RF-17SN8A800 58 160748 RF-17SN8A800 58 160749 RF-17SN8A80DU 58 160750 RF-17SN8A900 59 1605796 SM-5EP1N8AQL04 15 1605797 SM-5EP1N8AQL05 15 160580 SM-5ES1N8A800 1 1605805 SM-5ES1N8A800 1 1607018 RC-Z414 1607019 RC-Z417 160701 RC-Z48 4 16070 RC-Z4 4 160764 RF-1PS8A80DU 58 160765 RF-1PS8A900 59 160766 RF-1PS8A900 59 160767 RF-1PS8A90DU 59 160751 RF-17SN8A900 59 16075 RF-17SN8A90DU 59 16075 RF-17SN8AA00 6 160754 RF-17SN8AAD00 64 1605807 SM-5ES1N8A8004 1 1605809 SM-5ES1N8A8005 1 16058 SM-5ES1N8AY000 17 160584 SM-7EE1N8AS000 16 16070 RC-Z447 4 160704 RC-Z449 4 160705 RC-Z45 4 160706 RM-00000001100 17 160768 RF-1PS8AA00 6 160769 RF-1PS8AAD00 64 160770 RF-1PS8AAF00 6 160771 RF-1PS8AAK00 6 160755 SF-10KP004 71 160756 SF-10KS004 71 160758 SF-10KS0 70 160761 SF-10KS60 70 160585 SM-7EE1N8ASA00 16 160586 SM-7EP1N8A900 1 160580 SM-7EP1N8AC00 14 160581 SM-7EP1N8AC00 14 160707 RM-00000007100 17 160708 RM-0000000700 17 160709 RM-0000000Z100 17 160700 RM-0000000Z00 17 16077 RF-1PS8AWA00 60 16077 RF-1S1N8A800 58 160775 RF-1S1N8A800 58 160776 RF-1S1N8A80DU 58 160776 SF-0KP004 11 160781 SF-0KS60 (VPE4000) 11 1607405 SF-5ES1N8AYW00 109 1607406 SF-6DP000 11 16058 SM-7EP1N8AC004 14 16058 SM-7EP1N8AC005 14 160584 SM-7EP1N8ACL0 14 160585 SM-7EP1N8ACL0 14 160701 SF-10KS0 70 16070 SF-10KS50 70 160704 SF-0KS50 (VPE150) 11 160705 SF-5EP1N8AAC00 108 160777 RF-1S1N8A900 59 160778 RF-1S1N8A90DU 59 160779 RF-1S1N8AA00 6 160780 RF-1S1N8AAD00 64 160749 SF-7ES1N8AYW00 109 1607446 SF-Z0014 148 1607449 SF-Z0019 154 1607450 SF-Z00 145 CONINVERS 167

Index Numerical Page Page Page Page 160745 SF-Z005 149 1607454 SF-Z006 150 1607455 SF-Z007 15 1607456 SF-Z008 15 1607689 ST-ES1N8A9004S 9 1607690 ST-ES1N8AAC00S 94 1607691 ST-ES1N8AAD00S 94 160769 ST-ES1N8AW400S 9 16078 RF-1PS8AWQ00 60 160785 RF-1S1N8A900 59 160787 RF-1S1N8AAC00 64 160788 RF-1S1N8AW400 61 16147 SM-5EP1N8A9L4S 119 16148 SM-5ES1N8A8LS 118 16149 SM-5ES1N8A8LS 118 16140 SM-5ES1N8A8L4S 118 1607458 SF-Z009 144 1607459 SF-Z000 144 1607461 SF-Z001 144 160746 SF-Z00 144 1607694 ST-ES1N8AWQ00S 9 1607697 ST-5EP1N8A800 91 1607698 ST-5EP1N8A800S 90 1607699 ST-5EP1N8A800 91 160780 RF-1S1N8AWB00 61 160781 RF-1S1N8AWQ00 60 160784 RF-1S1S8AAC00 64 160786 RF-1S1S8AW400 61 16141 SM-7EP1N8A9LS 119 1614 SM-7EP1N8A9LS 119 1614 SM-7EP1N8A9L4S 119 16144 SM-7ES1N8A8LS 118 160746 SF-Z00 144 1607465 SF-Z005 144 1607470 SF-Z009 144 1607471 SF-Z0040 144 1607700 ST-5EP1N8A800S 90 1607701 ST-5EP1N8A8004 91 160770 ST-5EP1N8A8004S 90 1607705 ST-5EP1N8A900S 9 160787 RF-1S1S8AWB00 61 160789 RF-1S1S8AWQ00 60 160784 RF-1SN8AAC00 64 160784 RF-1SN8AW400 61 16145 SM-7ES1N8A8LS 118 16146 SM-7ES1N8A8L4S 118 161484 SL-Z0007 149 161485 SL-Z0008 149 160747 SF-Z0041 144 1607499 SL-5EP1N8A9001 15 1607500 SL-5EP1N8A900 15 1607501 SL-5ES1N8A8001 14 1607706 ST-5EP1N8A900S 9 1607707 ST-5EP1N8A9004S 9 1607708 ST-5EP1N8AAC00S 94 1607709 ST-5EP1N8AAD00S 94 1607844 RF-1SN8AWB00 61 1607845 RF-1SN8AWQ00 60 1607847 RF-1SS8AAC00 64 1607848 RF-1SS8AW400 61 161487 SL-Z0010 149 161488 SL-Z0011 149 161489 SL-Z001 149 161490 SL-Z001 149 160750 SL-5ES1N8A800 14 1607505 SL-7EP1N8A9001 15 1607506 SL-7EP1N8A900 15 1607507 SL-7ES1N8A8001 14 1607710 ST-5EP1N8AW400S 9 1607711 ST-5EP1N8AWQ00S 9 1607714 ST-5ES1N8A800 91 1607715 ST-5ES1N8A800S 90 1607849 RF-1SS8AWB00 61 1607850 RF-1SS8AWQ00 60 160785 RF-17P1N8AAC00 64 160785 RF-17P1N8AAF00 6 161491 SL-Z0014 149 16149 SL-Z0015 149 161516 SM-5EPWN8AA00 10 161517 SM-5EPWN8AWT00 10 1607508 SL-7ES1N8A800 14 16075 SM-5ES1N8AYW00 17 160754 SM-7ES1N8AYW00 17 1607577 ST-06KP010 5 1607717 ST-5ES1N8A800 91 1607718 ST-5ES1N8A800S 90 1607719 ST-5ES1N8A8004 91 160770 ST-5ES1N8A8004S 90 1607854 RF-17P1N8AAK00 6 1607857 RF-17P1N8AW400 61 1607860 RF-17P1N8AWA00 60 160786 RF-17P1N8AWB00 61 161518 SM-5ES1N8A8S 1 161519 SM-5ES1N8A8S 1 16150 SM-5ES1N8A8S4 1 16154 SM-5ES1N8AY000S 11 1607578 ST-06KP00 5 1607579 ST-06KP00 5 1607580 ST-06KS010 5 1607581 ST-06KS00 5 16077 ST-5ES1N8A900S 9 16077 ST-5ES1N8A900S 9 160774 ST-5ES1N8A9004S 9 160775 ST-5ES1N8AAC00S 94 1607866 RF-17P1N8AWQ00 60 160787 RF-17PN8AAC00 64 1607875 RF-17PN8AAF00 6 1607878 RF-17PN8AAK00 6 16155 SM-5ES1N8AYW00S 11 16156 SM-7EPWN8AA00 10 16157 SM-7EPWN8AWT00 10 16158 SM-7ES1N8A8S 1 160758 ST-06KS00 5 160761 ST-17P1N8A800 47 16076 ST-17P1N8A800S 46 160764 ST-17P1N8A800 47 160776 ST-5ES1N8AAD00S 94 160777 ST-5ES1N8AW400S 9 160778 ST-5ES1N8AWQ00S 9 16077 ST-7EP1N8A800 91 1607881 RF-17PN8AW400 61 160788 RF-17PN8AWA00 60 160788 RF-17PN8AWB00 61 1607885 RF-17PN8AWQ00 60 16159 SM-7ES1N8A8S 1 16150 SM-7ES1N8A8S4 1 16154 SM-7ES1N8AY000S 11 16155 SM-7ES1N8AYW00S 11 160765 ST-17P1N8A800S 46 160766 ST-17P1N8A8004 47 160767 ST-17P1N8A8004S 46 160769 ST-17P1N8A900S 48 160774 ST-7EP1N8A800S 90 160775 ST-7EP1N8A800 91 160776 ST-7EP1N8A800S 90 160777 ST-7EP1N8A8004 91 1607887 RF-17S1N8AAC00 64 1607889 RF-17S1N8AAF00 6 1607890 RF-17S1N8AAK00 6 1607891 RF-17S1N8AW400 61 161540 ST-17P1N8A6100S 51 161541 ST-17P1N8AH100S 51 16154 ST-17S1N8A6100S 51 16154 ST-17S1N8AH100S 51 160760 ST-17P1N8A900S 48 160761 ST-17P1N8A9004S 48 16076 ST-17P1N8AAC00S 50 16076 ST-17P1N8AAD00S 50 160778 ST-7EP1N8A8004S 90 1607740 ST-7EP1N8A900S 9 1607741 ST-7EP1N8A900S 9 160774 ST-7EP1N8A9004S 9 160789 RF-17S1N8AWA00 60 160789 RF-17S1N8AWB00 61 1607894 RF-17S1N8AWQ00 60 1607896 RF-17SN8AAC00 64 161544 ST-EP1N8A6100S 95 161545 ST-EP1N8AH100S 95 161546 ST-ES1N8A6100S 95 161547 ST-ES1N8AH100S 95 160764 ST-17P1N8AW400S 49 160766 ST-17P1N8AWQ00S 49 160769 ST-17S1N8A800 47 1607640 ST-17S1N8A800S 46 160774 ST-7EP1N8AAC00S 94 1607744 ST-7EP1N8AAD00S 94 1607746 ST-7EP1N8AW400S 9 1607747 ST-7EP1N8AWQ00S 9 1607898 RF-17SN8AAF00 6 1607899 RF-17SN8AAK00 6 1607900 RF-17SN8AW400 61 1607901 RF-17SN8AWA00 60 161548 ST-5EP1N8A6100S 95 161549 ST-5EP1N8AH100S 95 161550 ST-5ES1N8A6100S 95 161551 ST-5ES1N8AH100S 95 1607641 ST-17S1N8A800 47 160764 ST-17S1N8A800S 46 160764 ST-17S1N8A8004 47 1607644 ST-17S1N8A8004S 46 160775 ST-7ES1N8A800 91 160775 ST-7ES1N8A800S 90 1607755 ST-7ES1N8A800 91 1607756 ST-7ES1N8A800S 90 160790 RF-17SN8AWB00 61 160790 RF-17SN8AWQ00 60 1607904 RF-Z0001 15 1607905 RF-Z000 15 16155 ST-6EP1N8A6100S 95 161556 ST-6EP1N8A800 91 161557 ST-6EP1N8A800S 90 161558 ST-6EP1N8A800 91 1607646 ST-17S1N8A900S 48 1607647 ST-17S1N8A900S 48 1607649 ST-17S1N8A9004S 48 1607650 ST-17S1N8AAC00S 50 1607758 ST-7ES1N8A8004 91 1607759 ST-7ES1N8A8004S 90 160776 ST-7ES1N8A900S 9 1607764 ST-7ES1N8A900S 9 1607906 SF-5EP1N8AA00 106 1607908 SF-7EP1N8AA00 106 1607909 SL-16KP010 17 1607911 SL-1CKP010 17 161559 ST-6EP1N8A800S 90 161560 ST-6EP1N8A8004 91 161561 ST-6EP1N8A8004S 90 16156 ST-6EP1N8A900S 9 160765 ST-17S1N8AAD00S 50 160765 ST-17S1N8AW400S 49 1607654 ST-17S1N8AWQ00S 49 1607655 ST-0KP010 97 1607765 ST-7ES1N8A9004S 9 1607766 ST-7ES1N8AAC00S 94 1607767 ST-7ES1N8AAD00S 94 1607768 ST-7ES1N8AW400S 9 160791 SL-1CKP00 17 160791 SL-1CKP00 17 1607914 SL-1CKP040 17 1607915 SL-1CKP050 17 161564 ST-6EP1N8A900S 9 161565 ST-6EP1N8A9004S 9 161566 ST-6EP1N8AAC00S 94 161567 ST-6EP1N8AAD00S 94 1607656 ST-0KP00 97 1607657 ST-0KS010 97 1607658 ST-0KS00 97 1607661 ST-EP1N8A800 91 1607769 ST-7ES1N8AWQ00S 9 1607770 ST-Z0001 15 1607771 ST-Z000 15 160777 ST-Z000 15 1607916 SL-1CKS010 17 1607917 SL-1CKS00 17 1607918 SL-1CKS00 17 1607919 SL-1CKS040 17 161568 ST-6EP1N8AH100S 95 161569 ST-6EP1N8AW400S 9 161570 ST-6EP1N8AWQ00S 9 16157 ST-6ES1N8A6100S 95 160766 ST-EP1N8A800S 90 160766 ST-EP1N8A800 91 1607665 ST-EP1N8A800S 90 1607666 ST-EP1N8A8004 91 160777 ST-Z0004 15 1607775 ST-Z0005 15 1607776 ST-Z0006 154 1607777 ST-Z0007 154 160790 SL-1CKS050 17 160796 SL-Z0005 154 160797 SM-5EPWN8AAD00S 10 160791 SM-7EPWN8AAD00S 10 161575 ST-6ES1N8A800 91 161576 ST-6ES1N8A800S 90 161577 ST-6ES1N8A800 91 161578 ST-6ES1N8A800S 90 1607667 ST-EP1N8A8004S 90 1607669 ST-EP1N8A900S 9 1607670 ST-EP1N8A900S 9 1607671 ST-EP1N8A9004S 9 1607778 TU-Z00 154 160780 RF-1P1N8AAC00 64 160780 RF-1P1N8AW400 61 1607804 RF-1P1N8AWB00 61 160795 SM-Z000 15 160797 SM-Z0004 15 160798 ST-Z0010 145 160799 ST-Z0011 145 161579 ST-6ES1N8A8004 91 161580 ST-6ES1N8A8004S 90 16158 ST-6ES1N8A900S 9 16158 ST-6ES1N8A900S 9 160767 ST-EP1N8AAC00S 94 160767 ST-EP1N8AAD00S 94 1607674 ST-EP1N8AW400S 9 1607675 ST-EP1N8AWQ00S 9 1607806 RF-1P1N8AWQ00 60 1607808 RF-1P1S8AAC00 64 1607809 RF-1P1S8AW400 61 1607810 RF-1P1S8AWB00 61 1607956 SL-16KS010 17 160819 HC-ARP1NRA80DU 74 1608 HC-ARS1NRA80DU 74 1609977 PV-08P1NHG00 41 161584 ST-6ES1N8A9004S 9 161585 ST-6ES1N8AAC00S 94 161586 ST-6ES1N8AAD00S 94 161587 ST-6ES1N8AH100S 95 1607679 ST-ES1N8A800 91 1607681 ST-ES1N8A800S 90 160768 ST-ES1N8A800 91 160768 ST-ES1N8A800S 90 1607811 RF-1P1S8AWQ00 60 1607814 RF-1PN8AAC00 64 1607816 RF-1PN8AW400 61 1607817 RF-1PN8AWB00 61 1609978 PV-10P1NHG00 41 1609979 PV-1P1NHG00 41 1611796 RC-Z468 154 1611797 RC-Z469 154 161588 ST-6ES1N8AW400S 9 161589 ST-6ES1N8AWQ00S 9 161590 ST-7EP1N8A6100S 95 161591 ST-7EP1N8AH100S 95 1607684 ST-ES1N8A8004 91 1607685 ST-ES1N8A8004S 90 1607687 ST-ES1N8A900S 9 1607688 ST-ES1N8A900S 9 1607818 RF-1PN8AWQ00 60 160780 RF-1PS8AAC00 64 160781 RF-1PS8AW400 61 16078 RF-1PS8AWB00 61 161180 RC-Z490 140 16199 UC-Z4 14 16145 SM-5EP1N8A9LS 119 16146 SM-5EP1N8A9LS 119 16159 ST-7ES1N8A6100S 95 16159 ST-7ES1N8AH100S 95 161595 ST-8EP1N8A6100S 95 161598 ST-8EP1N8A800 91 168 CONINVERS

Index Numerical Page Page Page Page 161599 ST-8EP1N8A800S 90 161600 ST-8EP1N8A800 91 161601 ST-8EP1N8A800S 90 16160 ST-8EP1N8A8004 91 161764 RF-16P1N8AAK00 6 161765 RF-16P1N8AW400 61 161766 RF-16P1N8AWA00 60 161767 RF-16P1N8AWB00 61 161994 RF-17P1N8A9V0 67 161995 RF-17P1N8A9V0 67 161996 RF-17P1N8A9VDU 67 161997 RF-17PN8A9V0 67 16151 HC-ARS1NRAWA00 78 161540 HC-6P1NT400 79 161541 HC-ARP1NRA400 79 16154 HC-ARP1NRA90DU 75 16160 ST-8EP1N8A8004S 90 161605 ST-8EP1N8A900S 9 161606 ST-8EP1N8A900S 9 161607 ST-8EP1N8A9004S 9 161768 RF-16P1N8AWQ00 60 161769 RF-16PN8A900 59 161770 RF-16PN8A900 59 161771 RF-16PN8A90DU 59 161998 RF-17PN8A9V0 67 161999 RF-17PN8A9VDU 67 1614000 RF-17S1N8A9V0 67 1614001 RF-17S1N8A9V0 67 161541 SF-Z005 144 1615686 SL-5EPWN8AWA00 16 1615687 SL-7EPWN8AWA00 16 161608 ST-8EP1N8AAC00S 94 161609 ST-8EP1N8AAD00S 94 161610 ST-8EP1N8AH100S 95 161611 ST-8EP1N8AW400S 9 16177 RF-16PN8AA00 6 16177 RF-16PN8AAC00 64 161774 RF-16PN8AAD00 64 161775 RF-16PN8AAF00 6 161400 RF-17S1N8A9VDU 67 161400 RF-17SN8A9V0 67 1614004 RF-17SN8A9V0 67 1614005 RF-17SN8A9VDU 67 16161 ST-8EP1N8AWQ00S 9 161614 ST-8ES1N8A6100S 95 161617 ST-8ES1N8A800 91 161618 ST-8ES1N8A800S 90 161776 RF-16PN8AAK00 6 161777 RF-16PN8AW400 61 161778 RF-16PN8AWA00 60 161779 RF-16PN8AWB00 61 1614066 RF-1P1N8A8V0 66 1614067 RF-1P1N8A8VDU 66 1614068 RF-1P1S8A8V0 66 1614069 RF-1P1S8A8V0 66 161619 ST-8ES1N8A800 91 16160 ST-8ES1N8A800S 90 16161 ST-8ES1N8A8004 91 1616 ST-8ES1N8A8004S 90 161780 RF-16PN8AWQ00 60 161781 RF-16S1N8A900 59 16178 RF-16S1N8A900 59 16178 RF-16S1N8A90DU 59 1614070 RF-1P1S8A8VDU 66 1614071 RF-1PN8A8V0 66 161407 RF-1PN8A8V0 66 161407 RF-1PN8A8VDU 66 16164 ST-8ES1N8A900S 9 16165 ST-8ES1N8A900S 9 16166 ST-8ES1N8A9004S 9 16167 ST-8ES1N8AAC00S 94 161784 RF-16S1N8AA00 6 161785 RF-16S1N8AAC00 64 161786 RF-16S1N8AAF00 6 161787 RF-16S1N8AAK00 6 1614074 RF-1PS8A8V0 66 1614075 RF-1PS8A8V0 66 1614076 RF-1PS8A8VDU 66 1614077 RF-1S1N8A8V0 66 16168 ST-8ES1N8AAD00S 94 16169 ST-8ES1N8AH100S 95 16160 ST-8ES1N8AW400S 9 16161 ST-8ES1N8AWQ00S 9 161788 RF-16S1N8AW400 61 161789 RF-16S1N8AWA00 60 161790 RF-16S1N8AWB00 61 161791 RF-16S1N8AWQ00 60 1614078 RF-1S1N8A8VDU 66 1614079 RF-1S1S8A8V0 66 1614080 RF-1S1S8A8V0 66 1614081 RF-1S1S8A8VDU 66 161666 SF-Z004 150 161667 ST-Z001 15 161700 RF-1P1N8AWU00 68 161701 RF-1P1N8AWV00 68 16179 RF-16SN8A900 59 16179 RF-16SN8A900 59 161794 RF-16SN8A90DU 59 161795 RF-16SN8AA00 6 161408 RF-1SN8A8V0 66 161408 RF-1SN8A8V0 66 1614084 RF-1SS8A8V0 66 1614085 RF-1SS8A8V0 66 16170 RF-1P1S8AWU00 68 16170 RF-1P1S8AWV00 68 161704 RF-1PN8AWU00 68 161705 RF-1PS8AWU00 68 161796 RF-16SN8AAC00 64 161797 RF-16SN8AAD00 64 161798 RF-16SN8AAF00 6 161799 RF-16SN8AAK00 6 1614086 RF-1SS8A8VDU 66 1614087 RF-16P1N8A8V0 66 1614088 RF-16P1N8A8V0 66 1614089 RF-16P1N8A8VDU 66 161706 RF-1PS8AWV00 68 161707 RF-1S1N8AWU00 68 161708 RF-1S1N8AWV00 68 161709 RF-1S1S8AWU00 68 161800 RF-16SN8AW400 61 161801 RF-16SN8AWA00 60 16180 RF-16SN8AWB00 61 16180 RF-16SN8AWQ00 60 1614090 RF-16PN8A8V0 66 1614091 RF-16PN8A8VDU 66 161409 RF-16S1N8A8V0 66 161409 RF-16S1N8A8V0 66 161710 RF-1S1S8AWV00 68 161711 RF-1SN8AWU00 68 16171 RF-1SN8AWV00 68 16171 RF-1SS8AWU00 68 1618 RC-Z504 140 16189 HC-Z9 155 16180 RF-16S1N8AAD00 64 16181 ST-E015151 51 1614094 RF-16S1N8A8VDU 66 1614095 RF-16SN8A8V0 66 1614096 RF-16SN8A8V0 66 1614097 RF-16SN8A8VDU 66 161714 RF-1SS8AWV00 68 161715 RF-16P1N8A800 58 161716 RF-16P1N8A800 58 161717 RF-16P1N8A80DU 58 161958 RF-1P1N8A9V0 67 161959 RF-1P1N8A9V0 67 161960 RF-1P1N8A9VDU 67 161961 RF-1P1S8A9V0 67 1614098 RF-17P1N8A8V0 66 1614099 RF-17P1N8A8V0 66 1614100 RF-17P1N8A8VDU 66 1614101 RF-17PN8A8V0 66 161718 RF-16P1N8AWU00 68 161719 RF-16P1N8AWV00 68 16170 RF-16PN8A800 58 16171 RF-16PN8A800 58 16196 RF-1P1S8A9V0 67 16196 RF-1P1S8A9VDU 67 161964 RF-1PN8A9V0 67 161965 RF-1PN8A9V0 67 161410 RF-17PN8A8VDU 66 161410 RF-17S1N8A8V0 66 1614104 RF-17S1N8A8V0 66 1614105 RF-17S1N8A8VDU 66 1617 RF-16PN8A80DU 58 1617 RF-16PN8AWU00 68 16174 RF-16PN8AWV00 68 16175 RF-16S1N8A800 58 161966 RF-1PN8A9VDU 67 161967 RF-1PS8A9V0 67 161968 RF-1PS8A9V0 67 161969 RF-1PS8A9VDU 67 1614106 RF-17SN8A8V0 66 1614107 RF-17SN8A8V0 66 1614108 RF-17SN8A8VDU 66 16141 RC-Z494 140 16176 RF-16S1N8A800 58 16177 RF-16S1N8A80DU 58 16178 RF-16S1N8AWU00 68 16179 RF-16S1N8AWV00 68 161970 RF-1S1N8A9V0 67 161971 RF-1S1N8A9V0 67 16197 RF-1S1N8A9VDU 67 16197 RF-1S1S8A9V0 67 161447 RF-Z0007 15 161448 SL-Z0016 15 161449 SM-Z001 15 1614414 RF-1PN8AWV00 68 16170 RF-16SN8A800 58 16171 RF-16SN8A800 58 1617 RF-16SN8A80DU 58 1617 RF-16SN8AWU00 68 161974 RF-1S1S8A9V0 67 161975 RF-1S1S8A9VDU 67 161976 RF-1SN8A9V0 67 161977 RF-1SN8A9V0 67 1614571 SF-Z004 151 1614648 HC-ARP1NRA600 76 1614689 SF-Z0047 144 1615068 RF-1SN8A8VDU 66 16174 RF-16SN8AWV00 68 16175 RF-17P1N8AWU00 68 16176 RF-17P1N8AWV00 68 16177 RF-17PN8AWU00 68 161978 RF-1SN8A9VDU 67 161979 RF-1SS8A9V0 67 161980 RF-1SS8A9V0 67 161981 RF-1SS8A9VDU 67 16159 RF-1P1N8A8V0 66 161540 RF-1S1N8A8V0 66 161541 RF-17PN8A8V0 66 161545 RF-16PN8A8V0 66 16178 RF-17PN8AWV00 68 16179 RF-17S1N8AWU00 68 161740 RF-17S1N8AWV00 68 161741 RF-17SN8AWU00 68 16198 RF-16P1N8A9V0 67 16198 RF-16P1N8A9V0 67 161984 RF-16P1N8A9VDU 67 161985 RF-16PN8A9V0 67 161508 HC-6P1N00 77 161509 HC-6P1N00 77 161510 HC-6P1NTWA00 78 16151 HC-8P1N00 77 16174 RF-17SN8AWV00 68 161757 RF-16P1N8A900 59 161758 RF-16P1N8A900 59 161759 RF-16P1N8A90DU 59 161986 RF-16PN8A9V0 67 161987 RF-16PN8A9VDU 67 161988 RF-16S1N8A9V0 67 161989 RF-16S1N8A9V0 67 16151 HC-8P1N400 79 161514 HC-8P1N00 77 161515 HC-8P1N400 79 161516 HC-8P1NT00 77 161760 RF-16P1N8AA00 6 161761 RF-16P1N8AAC00 64 16176 RF-16P1N8AAD00 64 16176 RF-16P1N8AAF00 6 161990 RF-16S1N8A9VDU 67 161991 RF-16SN8A9V0 67 16199 RF-16SN8A9V0 67 16199 RF-16SN8A9VDU 67 161517 HC-8P1NTWA00 78 161518 HC-ARS1NRA400 79 161519 HC-ARS1NRA600 76 16150 HC-ARS1NRA90DU 75 CONINVERS 169

AI-0004-1 MNR. 5005545/15.11.09-00 Printed in Germany CONINVERS GmbH 009

CONINVERS GmbH Heisenbergstr. 1 D-7108 Herrenberg, Germany Phone: +49 (0) 70 /9 74-0 Fax: +49 (0) 70 /9 74-0 www.coninvers.com info@coninvers.com