Accessories for Enabling Switches

Transcription

1 BD Male plug SS Female connector C- Male flange connector SD Female connector BS Extension cable BD -pin + PE Dimension drawings Male plug SS -pin + PE Female connector C- -pin + PE BD for male plug SS on the enabling switch. SW 0 0 Male plug SS Male plug for enabling switch for connection to safety switch TZ... C (see catalog NZ/TZ). Female connector C- ) Female connector for hand-held enabling switches. Male flange connector SD Male socket for female connector BS. For the connection of handheld and HBE enabling switches. Female connector BS Female connector for male flange connector SD. For connection, e.g. to enabling switch. Pg 0 Male flange connector SD -pin + PE SW Pg, Female connector BS -pin + PE Pg SW Mx,, 0 SW Pg, 0 BD -pin + PE SS -pin + PE C- -pin + PE SD -pin + PE BS -pin + PE BS -pin + PE Crimp contact ) for male plug SS on the enabling switch Male plug for flange connector BD (e.g. TZ...C) Female connector Male flange connector for female connector BS on the enabling switch Female connector, straight, for flange connector SD - Extension cable m - Extension cable 0 m 00 BD 00 SS 0 Cable socket +PE 0 SD-M 00 BS 0 BS 0 BS For information on crimp contacts see page. ) Crimp contacts are included.

2 RC Male plug RC Blanking plug RC RC Male plug RC Blanking plug RC RC -pin Dimension drawings, Mx Male plug RC -pin Blanking plug RC -pin Ø SW RC ) For front panel mounting for connection of hand-held enabling switches. Fitted with soldered contacts. Rubber seal included. Male plug RC ) For connection, e.g. to enabling switches. Blanking plug RC ) For covering the flange connector RC. As an option, bridges can be fitted to the individual contacts at the customer, or a pre-wired version (coded) used. Coding: bridge from pin to pin and from pin to pin 0. Ø, (x) 0, RC -pin 0 PO Male plug RC -pin SW Cable max Blanking plug RC -pin Flange connector RC ) For front panel mounting for connection of enabling switches. Rubber seal included. Fitted with soldered contacts. Male plug RC ) For connection, e.g. to enabling switch. Blanking plug RC ) For covering the flange connector RC. Optionally, individual contacts can be bridged at the customer. For information on crimp contacts see page. ) Crimp contacts are included., Mx, (x) 0, 0 SW Cab le- max. 0 Soldered connection 00 -pin RC -pin RC -pin Crimp contact ) Crimp contact ) Crimp contact ) Soldered connection Crimp contact ) Crimp contact ) Male plug Blanking plug (with bridges) e.g. in combination with ZS...C0 Blanking plug (without bridges) Male plug Blanking plug (without bridges) Plug connector -pin 0 Blanking plug complete -pin 0 Blanking plug -pin 00 -pin 0 Plug connector -pin 0 Blanking plug -pin SW For technical data see page

3 UT Blanking plug UT with chain UT ) for male plug UT on enabling switch...c. UT -pin, Blanking plug UT with chain Blanking plug UT with chain ) Blanking plug for female flange connector UT.,,,,, (x), UT -pin Crimp contact ) For information on crimp contacts see page. ) Crimp contacts are included. for enabling switch..c Blanking plug with chain ( bridges included) 0 Flange connector / -pin / metal version 0 Short-circuit plug with chain

4 Connection cables Connection cable for enabling switch ZSM with plug connector RC Connection cable for enabling switch ZSM with plug connector RC The high-quality connection cable for the ZSM00 0 is available in two lengths and can be plugged directly on the device. The corresponding flange connector is available for connection to the ZSM kit (see page ). Cable length extended: see For plug connector RC on enabling switch ZSM Wiring: Pin to pin 0 are wired through :. Plug connector HAN0 0 View of connection side Designation Version Order No./item Connection cable for enabling switch ZSM with plug connector RC Coiled, length. m Coiled, length.0 m 0 Coiled cable with plug connector. m 0 Coiled cable with plug connector m Connection cable for enabling switch ZXE- -pin, tab connector Connector assignment Pin Cross-section [mm²] Core color 0. RD 0. BK 0. OR 0. BN 000 <0> 0 Designation Connection Order No./item Connection cable for enabling switch ZXE- Tab connector Connection cable for enabling switch ZXE- For technical data see page

5 List of plug connector suppliers We provide no guarantee for the completeness and correctness of the ordering data given. The data was valid on October 00. The related manufacturers reserve the right to make changes without notice. The plug connectors and accessories listed are also available from other manufacturers. and accessories For plug connector Function Manufacturer's designation Female connector M Cable socket SVM pins C- pins + PE MR,,, 0 and pins HAN0 0 pins + PE M Blanking plug M Socket crimp contacts for C-, packaging unit 00 pcs. Blanking plug Straight female connector (-pin), pre-assembled for built-in connector MR Straight female connector (-pin), pre-assembled for built-in connector MR Straight female connector (-pin), pre-assembled for built-in connector MR Straight female connector (0-pin), pre-assembled for built-in connector MR0 Straight female connector (-pin), pre-assembled for built-in connector MR Flange connector cable exit Socket contacts (installation for flange connector) Socket contacts for crimping Blanking plug Flange connector with flexible wires Protective cap for socket with retaining strap T0 00 Female receptacle VN () Single contact, silver, 0.-. mm T 000 Protective cap for female receptacle MIN-FPX-.. MIN-FPX-.. MIN-FP-.. MIN-0FP-.. MIN-FP Socket housing cable exit Socket contact insert crimp connection Crimp contacts, socket, 0. mm Cover Binder Amphenol-Tuchel MENCOM Harting RC-Y coded pins, solder For male connector RC RC-SY000 Flange plug connector -pin Coninvers Crimp and extraction tools For plug connector Function Manufacturer's designation SR and SR 0-00 XZC XWA Hirschmann C- TA000 + TA TA Crimp pliers, jaws and contact receptacle FG 000 Amphenol-Tuchel RC and RC RC-Z0 Crimp pliers for machined contacts RC-Z /insertion tool Coninvers UT YRCM Crimping tool for machined contacts RX0GE Burndy 0