oard to oard onnectors Table of Models Single Row.00/(.7mm) Pitch oard to oard onnectors Molded and Peel--Way Insulators Triple Row Description: Peel--Way (KS, KNS, KTS) Index: -69 to 400 (-4 F to 7 F) Features: and female connectors are designed in mating pairs..00/(.7mm) row to row pitch. High reliability screw-machined terminals with closed-end construction for 00% antiwicking of solder. For surface mount options, consult factory. Reliable mechanical support. ustom configurations available. KS FSDS K * RDD and KD have.00/(.4mm) pitch between rows. Note: FSDS replaces SDS, HSDS, and RSDS. RDDS replaces DDS and HDDS. RDD replaces DD. How To Order KNS RDDS (RDD*) KN (KD*) KTS KT Description: FR-4 (FSDS) Mat l: FR-4 Fiberglass Epoxy oard Index: -40 to 40 (-40 F to 84 F) Description: Molded (RDDS, RDD) Mat l: High Temp. Liquid rystal Polymer (LP) Index: -40 to 60 (-40 F to 00 F) Description: Peel--Way (K, KN, KD, KT) Index: -69 to 400 (-4 F to 7 F) ody Type RoHS ompliant Insulators: KS - Single Row Peel--Way FSDS** - Single Row FR-4 KNS - Peel--Way RDDS - Molded RDD*- Molded KTS - Triple Row Peel--Way *.00/(.4) pitch between rows **FSDS is available with Gold plating only (GG) KTS 090-7 M G (no. of pins per row x no. of rows) Std. pins per row = 0, 0, 0, 40 & 0 RoHS ompliant: ontact Plating RoHS ompliant: ody Type RoHS ompliant Insulators: K - Single Row Peel--Way KN - Peel--Way KD*- Peel--Way KT - Triple Row Peel--Way *.00/(.4) pitch between rows KT 090 - M RoHS ompliant: (no. of pins per row x no. of rows) Std. pins per row = 0, 0, 0, 40 & 0 Energy Way, West Warwick, RI 089 US Tel: 800.44.980 40.8.00 Fax: 40.8.87 atalog 6 Note: Terminals plated with Matte Tin are available only with Gold plated contacts. Quick-Turn delivery is not available on products with Matte Tin plating. 46
-DDELIVER.00/(.7mm) Pitch oard to oard onnectors Molded and Peel--Way Insulators dditional standard and custom terminals available. See Terminals section or consult factory. Type -68 Type -47 Type -0 Type -7 Molded or FR-4 only Molded or FR-4 only Molded or FR-4 only Peel--Way only (Not Quick-Turn) (Not Quick-Turn) Standard Quick-Turn Terminals - QUIK-TURN oard to oard onnectors.04 Dia. (.04).04 Dia. (.07).04 Dia. (.07).04 Dia. (.07).6 (4.9).080 (.0).080 (.0).0 (.67).0.0 Dia. (.8).78 (7.06).070 (.78).04 Dia. (.86).0 (.8). Standard Terminals - Surface Mount Type - Type -6 Peel--Way only Peel--Way only.9 (.8).0 Peel--Way Removable arriers Polyimide Film Peel away after soldering to P.. Dia. (.0).0. Dia. (.0).00 (.7) Standard Quick-Turn Terminals - Thru-Hole Type - Type - Peel--Way only Peel--Way only.07 Dia..0.. Single Row.07 Dia..08 (.6)...00" (.7mm) Spacing Row to Row Type - Peel--Way only (Not Quick-Turn).07 Dia..070 (.78).. Triple Row Solder fillets visible both sides for inspection and cleaning.. Place socket on P board.. Send P board and socket through soldering operation.. Peel away polyimide film carrier for complete solder joint visibility or leave in place for added stability. vailable Online: RoHS Qualification Test Report P See following pages for typical board to board spacing configuration and additional dimensional information. (.7).00 Typ. (.4) (.7) (.7) (.7).00 Typ. (.4) (.7) (.7) Total # of Pins per onnector Single Dual Triple 00 00 00 00 00 00 080 00 Molded or FR-4 Peel--Way 090 0 0 # of Pins Per Row 0 0 0 40 0.0 (.97).00 (6.67).0 (9.7).00 (.07).0 (64.77).40 (.4).90 (4.).40 (6.8).90 (49.).40 (6.) Total # of Pins per onnector Single Dual Triple 00 00 00 # of Pins Per Row.60 (6.).0 (9.).60 (4.9).0 (4.6).60 (67.) Multiply number of rows by number of pins per row for total pin count in part number. 00 00 00 080 00 090 0 0 0 0 0 40 0.40 (.4).90 (4.).40 (6.8).90 (49.).40 (6.) 47 Energy Way, West Warwick, RI 089 US Tel: 800.44.980 40.8.00 Fax: 40.8.87 atalog 6
oard to oard onnectors Thru-Hole & Figure Peel--Way & Peel--Way.00/(.7mm) Pitch oard to oard onnectors Figure & Peel--Way Surface Mount & Thru-Hole Figure & Peel--Way Part # Part #.0/(.8).046/(.7) K00-G KS00-7MG.070/(.78).08/(.6).070/(.78).070/(.78).00/(.76).08/(.6).08/(.6).070/(.78).070/(.78).08/(.6).08/(.6).070/(.78).08/(.6).0/(.8).0/(.8)./(.84).8/(.00)./(.84).8/(.00).6/(4.09).6/(4.9)./(.84).8/(.00).6/(4.09).6/(4.9).6/(4.9).6/(4.09).78/(7.06).78/(7.06).78/(7.06).08/(.6).00/(.4).4/(.6).49/.8/(4.6).88/(4.78).9/(4.88).96/(4.98).97/(.00).0/(.6)./(.87)./(.97).0/(6.).46/(6.).09/(7.8).48/(8.84).6/(9.) Order one each & to get the required dim. K00-G K00-G K00-G K00-G K00-G K00-G K00-G K00-G K00-G K00-G K00-G K00-G K00-G K00-G K00-G K00-G K00-G 0 position single row part numbers shown. See How To Order section for ordering information. If required dimension is not shown, consult factory. KS00-7MG KS00-7MG FSDS00-7GG FSDS00-GG FSDS00-7GG FSDS00-GG FSDS00-GG FSDS00-68GG FSDS00-7GG FSDS00-GG FSDS00-GG FSDS00-68GG FSDS00-68GG FSDS00-GG FSDS00-0GG FSDS00-0GG FSDS00-0GG Fig. Energy Way, West Warwick, RI 089 US Tel: 800.44.980 40.8.00 Fax: 40.8.87 atalog 6 48
.00/(.7mm) Pitch oard to oard onnectors Thru-Hole & Surface Mount Figure 4 Peel--Way & Figure & Peel--Way Surface Mount & Figure 6 & Peel--Way oard to oard onnectors Part # Part #.0/(.8).046/(.7) K00-G KS00-7MG.00/(.7).00/(.7).00/(.7).00/(.7).00/(.7).0/(.8).8/(.00).6/(4.09).6/(4.9).6/(4.09).6/(4.9).78/(7.06).06/(.6).68/(4.7).9/(4.88).96/(4.98)./(.6)./(.46).09/(7.8) Order one each & to get the required dim. K00-6G K00-6G K00-G K00-G K00-6G K00-6G K00-G KS00-7MG FSDS00-GG FSDS00-GG FSDS00-68GG FSDS00-GG FSDS00-68GG FSDS00-0GG.78/(7.06).6/(8.) K00-6G FSDS00-0GG 0 position single row part numbers shown. See How To Order section for ordering information. If required dimension is not shown, consult factory. Fig. 4 4 6 6 6 49 Energy Way, West Warwick, RI 089 US Tel: 800.44.980 40.8.00 Fax: 40.8.87 atalog 6
oard to oard onnectors Staggered.00/(.7mm) Pitch oard to oard onnectors Peel--Way Insulators Table of Models Triple Row Description: Peel--Way (KMS, KMD, KMT) Index: -69 to 400 (-4 F to 7 F).00 Typ. (.) KES HKS Description: Peel--Way (KM, KM, KM) Index: -69 to 400 (-4 F to 7 F).00 Typ. (.) KE HK Features: Supplied in high temperature Peel- -Way removable terminal carrier. (ex. KES0-) Triple Row (ex. HKS00-) and male connectors are designed in mating pairs..00/(.7mm) row to row pitch. High reliability screw-machined terminals with closed-end construction for 00% anti-wicking of solder. ustom configurations available. Specifications: Terminals: rass - opper lloy (6000) STM--6 ontacts: eryllium opper (700) STM--94 (.7) # of Pins Total (0.6).00 (.08) 9.600 (.4) (0.6).900 (.86).700 (7.78) 9.00 (7.94).900 (.86) (.6).40 (0.48) How To Order (.7) KES 0-8 M G (.7) (.7) # of Pins Total 8 (0.6).00 (.08) 4.600 (.4) (0.6) 0.800 (0.).600 (.4) 6.000 (.40).800 (0.).00 (.0).00 (7.94) Plating: over Nickel over Nickel over Nickel Gold per STM--488 Matte Tin per STM4-97 Tin/Lead per MIL-P-878 Nickel per QQ-N-90 ody Type RoHS ompliant Insulators: KES - HKS - Triple Row - Positions 8 - Positions Triple Row (See Tables above for standard pin counts) ontact Plating RoHS ompliant: RoHS ompliant: KE 0 - M ody Type RoHS ompliant Insulators: KE - HK - Triple Row - Positions 8 - Positions Triple Row RoHS ompliant: Energy Way, West Warwick, RI 089 US Tel: 800.44.980 40.8.00 Fax: 40.8.87 atalog 6 Note: Terminals plated with Matte Tin are available only with Gold plated contacts. Quick-Turn delivery is not available on products with Matte Tin plating or Triple Row body types. 0
Staggered.00/(.7mm) Pitch oard to oard onnectors Peel--Way Insulators dditional standard and custom terminals available. See Terminals section or consult factory. Type -8 Type -0 Type -46 Type -0 (mates with -6 only) (not Quick-Turn) Standard Quick-Turn Terminals.08 Dia. (.47).0..08 Dia. (.47).0 (.8)..08 Dia. (.47).04 (.09). QUIK-TURN DDELIVER oard to oard onnectors P.08 Dia. (.97).04 Dia. (.86).04 Dia. (.86) P Standard Quick-Turn Terminals Type - Type - Type - Type -6 (not Quick-Turn) (not Quick-Turn).07 Dia..0...07 Dia..08 (.6)...07 Dia..070 (.78)... Dia. (.0).0.00 (.7) Figure Thru-Hole Figure Surface Mount Peel--Way Removable arriers Polyimide Film Peel away after soldering to P. Part # Part #.0/(.8).046/(.7) KE0-G KES0-0MG.00/(.7).00/(.7).070/(.78).00/(.7).08/(.6).070/(.78).08/(.6).0/(.8).0/(.8).0/(.8).04/(.09).0/(.8).046/(.7).06/(.7).06/(.7).06/(.6).08/(.06).08/(.6).09/(.6).00/(.4).0/(.7) Order one each & to get the required dim. KE0-G KE0-G KE0-G KE0-6G KE0-6G KE0-G KE0-6G KE0-G KE0-G KES0-0MG KES0-8MG KES0-8MG KES0-0MG KES0-8MG KES0-0MG KES0-46MG KES0-0MG KES0-8MG.6/(.9) KE0-G KES0-8MG position dual row part numbers shown. See How To Order section for ordering information. If required dimension is not shown, consult factory. Fig. # Solder fillets visible both sides for inspection and cleaning.. Place socket on P board.. Send P board and socket through soldering operation.. Peel away polyimide film carrier for complete solder joint visibility or leave in place for added stability. vailable Online: RoHS Qualification Test Report P Energy Way, West Warwick, RI 089 US Tel: 800.44.980 40.8.00 Fax: 40.8.87 atalog 6