ATLAS Roll Roofing Products World s Largest producer of roofing s Preferred by roofing professionals. Atlas has you covered on every part of the job, even what goes under your roofing. We are proud to offer the largest and most innovative variety of premium underlayment and roll-roofing products. They are manufactured to ensure easy installation as well as to perfectly complement virtually all roofing systems. CORPORATE SALES & MARKETING 2000 RiverEdge Parkway, Suite 800 Atlanta, Georgia 30328 Sales OfFices Ardmore, OK (800) 261-2852 FAX (580) 223-6894 Daingerfield, TX (800) 270-2852 FAX (903) 645-2291 Franklin, OH (800) 260-2852 FAX (937) 746-6040 Hampton, GA (800) 251-2852 FAX (770) 946-5249 Meridian, MS (800) 933-2721 FAX (601) 483-7344 Made in U.S.A. Atlas offers homeowners double the coverage of their Premium Protection Period on any Atlas Signature Select Roofing System. This product qualifies for use in the Atlas Signature Select Roofing System when used in combination with other qualifying Atlas products. For more information please visit: www.atlassignatureselect.com ATL-090605-00 Roll Roofing - Final.indd 1 3/9/09 10:34:50 AM
Roofing Product ASTM Codes and Compliances Description Width Length Approx. Roll Coverage Asphalt Roll Roofing #90 Mineral Surface Roll Roofing Florida Building Code Approved Miami-Dade County Compliance Req. The top surface of this organic-based roll is imbedded with mineral granules. Can be used alone as a primary roof covering. 36" 36' 1 Slate/Tile D-6380 Class M Premium Slate Granule Surfaced Tile Organic Felt Based 36" 36' 1 Standard Asphalt Saturated Organic Felt #15 Type I Standard Shingle 36" 144' 4 #30 Type III Heavy Shingle 36" 72' 2 Specification Asphalt Saturated Organic Felt #15 Specification Felt Type II Specification Shingle 36" 144' 4 #15 Specification Felt, Perforated Type II Specification Perforated Shingle 36" 144' 4 #30 Specification Felt Type IV D-226 Specification Shingle 36" 72' 2 Split and Jumbo Rolls - Asphalt Saturated Organic Felt #30 Standard, Split Rolls - 18 x 72 Master Roll = 2 Split Rolls Type III Wood Shake Shingle 36" Perforated and Split at 18" 36" 72' 2 #30 Jumbo, 18" x 120' Shake Felt (Split Rolls) Type III Wood Shake Shingle 36 Perforated and Split at 18" 36" 120' 1.66 Glass Fiber Reinforced Asphalt Gorilla Guard D-6757 Synthetic Shingle Premium Glass Reinforced Shingle 36 141.5 4 Summit D-6757 07.927.05 Light Weight, Extremely Strong, Woven Polypropylene Fabric with UV & Water Resistive Coatings, 6 Month Exposure, Synthetic Shingle 48" 250' 10 Modified Bitumen Roll Roofing WeatherMaster Granular D-1970 08-1006.03 Granular Surfaced Peel & Stick SBS Reinforced 36" 33.3' 1 36" 72.1' 2 WeatherMaster PolySeal D-1970 08-1006.03 Peel & Stick, Polysurfaced, High temp, SBS Modified Asphalt Roof 36" 66.6' 2 WeatherMaster TU Ultra D-1970 08-0108.03 Peel & Stick, Woven Polyester Surfaced SBS, Heavy Tile 36" 66.6' 2 Shingle Starter Products Starter Strip With Sealant D-3462 Asphalt coated, Glass mat Reinforced Shingle Starter Strips 7" 36" 120 Lineal Ft. 10" 22 11 /16 79 Lineal Ft. 12" 36" 42 Lineal Ft. Copyright 2009, Atlas Roofing Corporation ATL-090605-00 3/09 ATL-090605-00 Roll Roofing - Final.indd 2 3/9/09 10:34:51 AM
Similar Cost Per Square to #30 Felt. Gorilla Guard Product Description Gorilla Guard high performance underlayment for steep slope roof applications. Made to order for the true professional. Contractors across the country told us what they wanted in a high quality underlayment. We utilized new technology to create an underlayment with high performance features that out-performs typical organic felt by adding glass fibers. You ll save time and labor costs by using the right product the first time. Meets ASTM D 6757 criteria for reinforced underlayments Meets performance criteria of ASTM D 4869 Type I Convenient four square coverage rolls; less waste and less handling UL Classified as roofing accessory Glass fiber reinforced, organic felt underlayment Strong/tough Lays flatter on deck in wet conditions Highly resistant to wrinkling Reduces the likelihood of slipping for increased safety Resists tear away from fasteners when walked on or in strong wind when properly installed Meets shingle underlayment requirements for the Signature Select roofing system Better quality product than #30 Felt at similar cost per square Florida building code approved - Atlas also offers all standard #15 and #30 ASTM underlayments. UPGRADE THE JOB NOT THE Roofing System PRICE Roofing System Atlas offers homeowners double coverage of their Premium Protection Period on any Atlas Signature Select Roof System. This product qualifies for use in an Atlas Signature Select Roofing System when used in combination with other qualifying Atlas products. For more information please visit www.atlassignatureselect.com Roofing System www.atlasroofing.com ATL-080588-00 Atlas Gorilla Guard DS 4SQ.indd 1 1/29/09 11:09:48 AM
Why would the world s largest saturated felt underlayment manufacturer introduce a synthetic product? Simply put, there are many roofing installation needs where even the best #30 in the world is not designed for the long exposure and toughness requirements provided by a synthetic woven fabric product such as SUMMIT. will always be the most common underlayment product for use when the job is being dried in immediately and no special performance needs are being considered. However, many jobs have a long open time from the dry-in to the roof covering being installed and do need a tougher product, or the owner simply has the desire to use a premium product. That s why Atlas is offering SUMMIT! SUMMIT is constructed of a light weight, extremely strong, woven polypropylene fabric, with UV and water resistive coatings and packaged for convenience in 10 square rolls weighing less than 30 lbs. each. SUMMIT is unaffected by exposure to water and sunlight for at least 6 months - exactly what is needed to survive those special needs jobs. Summit Synthetic An inorganic, high strength woven fabric based roof system component appropriate for use in virtually all steep slope roof covering systems. SUMMIT is fully compatible with asphalt shingles, metal roof coverings, Clay Tile, Slate, Concrete Tiles, Wood Shingles and Shakes or any other code approved, steep slope roof covering. The UL Classification demonstrates conformance to critical fire testing requirements. SUMMIT is designed to provide for the lifetime need of an underlayment, offering water-shedding redundancy within the roof system while protecting the structure from water damage. Codes & Compliances AC 207, Ultraviolet Exposure for 6 months AC 207, Accelerated Ageing ASTM D 108, Fire Resistance ASTM D 6757, Inorganic shingle underlayment standard Performance characteristics exceed - ASTM D 4869, Type l, Type ll, Type lll, Type lv, (Standard specification for asphalt saturated felt) UL 790, Fire resistance UL Classified as a Prepared Roofing Accessory Atlas Signature Select - system component Florida Building Code Approved - Miami-Dade Compliance Requirements 07-0927.05 Technical Information Coverage w/ 4" Lap High tear strength 6-month min. UV resistance 100% recyclable Inorganic construction Assumes shingle warranty High coefficient of friction High tear strength Printed lay-up lines High burst strength 10 sq. roll size < 30 lbs. per roll Available at all Atlas plants Roll Size Material Per Roll SUMMIT 917 sq.ft. 48 x 250 1000 sq. ft. Safer to walk on, holds fasteners Maintains integrity of performance Eco-Friendly Does not absorb water Warranty matches Atlas shingle term Good walking traction Resists high wind blow-offs Easy alignment on roof Resists fastener pull through More coverage, less labor Easier and safer to handle Available 1 pallet at a time with Atlas top load ATL-090591-00 Summit - Final.indd 1 3/9/09 2:02:59 PM
PRODUCT INFORMATION WeatherMaster Granular underlayment is a self-adhesive composite underlayment. The adhesive layer is composed of a proprietary modified asphalt, reinforced with an extra heavy fiberglass mat. The surfacing of opaque granules provides excellent traction and protection from UV radiation and weathering. The self-adhesive side is covered with a split release sheet which is removed during installation. WeatherMaster Granular underlayment composite is 47 mils (1.3mm) thick and is supplied in rolls of one square (3' x 33.3') (0.9m x 10m) and two square (3' x 72.1') (0.9m x 22m). WeatherMaster is selfadhesive and cold-applied. No special adhesives, heat or equipment are necessary to install WeatherMaster Granular underlayment under normal dry conditions of 45 F or warmer. STANDARDS & CODE LISTINGS Underwriters Laboratories Class A and Class C Fire Rating Based on Roof Covering ASTM D 1970 Standard Ice Dam ICC-ES Report ER 1783 Uniform Building Code Nos. 32B-1, 32B-2, 32D-1 and 31D-2 Florida Building Code Approved - Miami-Dade Compliance Requirements 08-1006.03 WeatherMaster Granular underlayment provides a secondary layer of waterproofing protection needed to help prevent damage from ice dams and windblown rain. This self-adhering modified bitumen underlayment creates a watertight barrier by sealing to the deck and around nails to provide continuous protection year after year. WeatherMaster helps protect the entire deck of a properly ventilated roof or just those problem areas where water collects or drainage is slow. And, since it can go under any roofing material from asphalt shingles to tile, you can enjoy maximum protection with the architectural look you want. Skid resistant surface for better traction and safer application. UV protected surface 45 days exposure. High temperature stability - 200 F. Self-adhesive backing seals directly to the deck. Aggressive bond at low temperatures, 45ºF min. Repositionable at installation. SBS-modified asphalt coating helps seal around nails for a watertight result. Fiberglass mat is stronger and provides better tear resistance than saturated felt. TECHNICAL DATA Provides secondary water barrier Extra roofing protection for vulnerable areas. Use for valleys, eaves, flashings, hips, ridges and rakes, and around dormers and skylights. Can be used in new construction or in reroofing requiring a complete tear-off. Provides extra protection under any type of roofing: tile, wood shake, asphalt, slate or metal. Helps extend the life of your roof system. Easy to install even for do-it yourselfers. Complies with local codes where required May be left on deck and recovered when reroofed. Property Test Method Minimum Value ASTM D 1970 All Pass Water Vapor Transmission ASTM E 96 0.019 g/hr/sq.m. (max) Pliability, 14 F (-10 C), 1/8 90 bend ASTM D 146 Pass Peel Adhesion ASTM C 794 19 lbs/in Thermal Stability SAG-200 F (93 C) ASTM C 1970 Pass MIL Thickness 47 MIL Size-1 Square Roll 36" x 33.3" 1 SQ. Roll Provides approx.* 88 Sq. Ft. Coverage Size-2 Square Roll 36" x 72.1" 2 SQ. Roll Provides approx.* 200 Sq. Ft. Coverage *With 3" Continuous Edge Laps Per Roll ATL-090596-00 WeatherMaster Granular - Final.indd 1 3/11/09 11:10:52 AM
HIGH TEMPERATURE UNDERLAYMENT Self-Adhering for Metal and All Other Types of Roofing Systems Product INFORMATION WeatherMaster PolySeal is a durable, self-adhering modified composite underlayment, specifically designed to withstand the rigors of all roofing applications. The strong, slip resistant, poly fabric surface provides a rugged barrier to physical damage, UV degradation, weather, and moisture. The unique, modified asphalt adhesive layer offers the application benefits of cold temperature adhesion and exceptional thermal stability under high heat. The self-adhesive layer is covered with a high temperature split release sheet which is removed during installation. PolySeal has a 3" wide peel-off top selvage edge to provide additional system sealing at the top laps. WeatherMaster PolySeal is 50 mil (1.2 mm) thick and is supplied in 200 sq. ft. - (18.58 m) or (3 ft. x 66.6 ft.) (.9 m x 20.3 m) rolls. WeatherMaster PolySeal is self-adhering and cold applied. No special adhesives, heat or equipment are necessary to install PolySeal when installed at 45ºF and warmer. STANDARDS & CODE LISTINGS Underwriters Laboratories Class A and Class C Fire Rating Based on Roof Covering ASTM D 1970 Standard Ice Dam ICC-ES Report ER 1783 Uniform Building Code Nos. 32B-1, 32B-2, 32D-1 and 31D-2 Florida Building Code Approved - Miami-Dade Compliance Requirements 08-1006.03 Superior Slip Resistant, Poly Fabric Surface Thermally Stable up to 260 F (High Temp) 3" Peel-off Top Selvage Edge Self-Adhering & Cold Applied Foot Traffic Damage Resistant 50 MIL Thickness Available as 4" or 6" wide Flashing Tape PolySeal is an excellent underlayment for metal roofs. PolySeal prevents moisture entry into structures by sealing uniformly to the substrate and around nail penetrations. PolySeal can serve as a temporary roof to protect the structure until the primary roofing system is installed. PolySeal may be exposed for a maximum of 45 days. PolySeal is an excellent roof deck panel flashing tape to provide a secondary water barrier. Special Instructions: PolySeal should be installed only when ambient and substrate temperatures are 45 F (7.2 C) or higher. Prime wood or metal surfaces at temperatures below 45 F. Remove all dirt, dust, loose nails and debris prior to installing PolySeal. Decking must be dry. When PolySeal is to be adhered to any metal surfaces, priming with asphalt primer meeting ASTM D 41 is recommended. TECHNICAL DATA Property Test Method Minimum Value Tensile Strength ASTM D 412 25 lbs/in (1428 psi) Elongation (Rubberized Asphalt) ASTM D 412 250% Low Temperature Flexibility 25 F ( 32 C) ASTM D 1970 Unaffected Adhesion to Plywood ASTM D 903 15 lbs/in (528 N/M) @ 75 Permeance ASTM E 96 <0.03 perms (max) MIL Thickness 50 MIL Size-2 Square Roll 36" x 66.6' High Temperature Installations Up To 260 F ATL-090598-00 WeatherMaster Polyseal - Final.indd 1 3/9/09 9:34:24 AM
Product INFORMATION WeatherMaster TU Ultra is a self adhesive tile underlayment. This underlayment is uniquely designed for use under tile, slate or metal roofing systems. WeatherMaster TU Ultra consists of a proprietary modified asphalt and a woven polyester. The woven polyester top surface aggressively bonds with foam adhesives used in tile installation and can withstand stacked tiles without slippage or damage to the membrane surface. It also provides superior traction for roofers during installation of the primary roofing system. No special adhesives, heat or equipment are necessary during installation above 45ºF and rising. The 3" wide peel off top selvage edge creates a waterproof bond with the succeeding course and provides the alignment guide for the next course. WeatherMaster TU Ultra is 60 mil. (1.5 mm) thick and is supplied in 200 sq. ft. (18.58 sq. m.) or 3' x 66'6" (1.9 m x 20.3 m) rolls. STANDARDS & CODE LISTINGS Underwriters Laboratories Class A and Class C Fire Rating Based on Roof Covering ASTM D 1970 Standard Ice Dam Uniform Building Code Nos. 32B-1, 32B-2, 32D-1 and 31D-2 Miami-Dade County TAS 103 Stack Test Florida Building Code Approved - Miami-Dade Compliance Requirements 08.0108.03 Superior Slip Resistant Surface Excellent Adhesion Surface for Tile Foams Thermally Stable Up To 260 F (High Temperature) No Special Adhesives Necessary 60 Mil Thickness 3" Top Peel Off Selvage Edge Special Instructions: WeatherMaster TU Ultra should be installed when ambient and substrate temperatures are 45ºF (4.4ºC) and rising. The deck must be clean, dry and free from loose materials and contaminants. All metal flanges shall be primed with asphalt primer prior to installation of WeatherMaster TU Ultra. Some codes require an additional base sheet course under WeatherMaster TU Ultra. Check your local building codes and use a base sheet that meets ASTM D 226, Type II, ASTM D 4869 Type IV or ASTM D 2626 if one is required. Apply the base sheet parallel to and abutting the eave. Apply the metal drip edge over the deck eave edge and nail 9" on center. End laps should be 6" and side laps a minimum of 3". Mechanically fasten the base sheet to deck with approved nails, staples or cap nails 6" on center at the laps and two staggered rows 12" on center in the field of the roll. Cover entire roof with the base sheet. Coat the top of the drip edge with a 2" wide troweling of modified bitumen adhesive. If an additional course is not used under WeatherMaster TU Ultra, place the metal drip edge directly on the deck and seal the leading edge as described above. For steep slope roofs (above 7" in 12"), secure WeatherMaster TU Ultra with either nails, staples or cap nails, placed 6" (150mm) on center only in the black selvage and overlap areas. When applying any WeatherMaster roofing underlayment, proper, code approved roof assembly ventilation is required. TECHNICAL DATA WeatherMaster TU Ultra Passed Miami-Dade County TAS 103 Test Of 10 Stacked Tiles at 90 Days Exposure WeatherMaster TU Protects Against Wind Driven Rain By Ultra Bonding To The Roof Deck And Sealing Around Fastener Penetrations WeatherMaster TU Ultra May Be Exposed For A Maximum Of 180 Days Top Selvage Edge Bond Creates Waterproof Joint Property Test Method Minimum Value Tensile Strength ASTM D 412 100 lbs/in (1428 psi) Elongation (Rubberized Asphalt) ASTM D 412 250% Low Temperature Flexibility 25 F ( 32 C) ASTM D 1970 Unaffected Thermal Stability/Sag 200 F (93 C) ASTM D 1970 Pass Adhesion to Plywood ASTM D 903 9 lbs/in (528 N/M) Permeability ASTM E 96 0.01 perms (max) MIL Thickness 60 MIL Size-2 Square Roll 36" x 66.6' High Temperature Installations Up To 260 ATL-090597-00 WeatherMaster TU Ultra - Final.indd 1 3/9/09 10:03:04 AM