SAMSUNG SMARTCAM User Manual SNH-P6410BN

SAMSUNG SMARTCAM User Maual 0678! SNH-P6410BN

SPECIFY SERVICE INSTRUCTIONS AND WARRANTY TERMS This device complies with Part 15 of the FCC Rules. Operatio is subject to the followig two coditios: (1) this device may ot cause harmful iterferece, ad (2) this device must accept ay iterferece received, icludig iterferece that may cause udesired operatio. FCC NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT. Samsug SmartCam User Maual Copyright 2014 Samsug Techwi Co., Ltd. All rights reserved. Trademark is the registered logo of Samsug Techwi Co., Ltd. The ame of this product is the registered trademark of Samsug Techwi Co., Ltd. Other trademarks metioed i this maual are the registered trademark of their respective compay. Restrictio Samsug Techwi Co., Ltd shall reserve the copyright of this documet. Uder o circumstaces, this documet shall be reproduced, distributed or chaged, partially or wholly, without formal authorizatio of Samsug Techwi. Disclaimer Samsug Techwi makes the best to verify the itegrity ad correctess of the cotets i this documet, but o formal guaratee shall be provided. Use of this documet ad the subsequet results shall be etirely o the user s ow resposibility. Samsug Techwi reserves the right to chage the cotets of this documet without prior otice. Operatioal Descriptio The operatioal descriptio shall fulfil the requiremets of Rule Part 2.1033(b)(4). The rule part requires, "A brief descriptio of the circuit fuctios of the device alog with a statemet describig how the device operates. This statemet should cotai a descriptio of the groud system ad atea, if ay, used with the device". The above requiremet has bee further iterpreted by the FCC to mea that the descriptio shall: a. be a operatioal or techical descriptio of how the device operates, is modulated ad meets requiremets; b. describe the EUT completely. What is it (i plai Eglish as well as techical terms)? Give a clear, cocise fuctioal descriptio of device operatio. c. always describe the sigal, such as modulatio type, pulse repetitio rate, sigal type ad iformatio beig set. Describe all modulatio types ad all data rates. Istructios & Warraty The maufacturer is ot resposible for ay loss or radio/tv iterferece caused by uauthorized modificatio of the product. Such modificatio will void the warraty of the product as well as the user s right of use. WARNING The product must be assembled ad istalled by a adult. Before usig, read all istructios o this maual thoroughly ad follow operatioal istructios, warigs o this maual ad prited o the product. To avoid etagled power cord, do ot place it aroud the baby bed or other ifat furiture. Keep this product ad its power cord out of childre s reach.

Especially, the power cord should be istalled carefully while keepig it out of childre s reach. Never use the product ear bath tub, sik, washig machie ad i wet basemet to avoid moisture. The product is desiged for idoor use. The product is ot desiged for medical moitorig, ad requires a grow-up s protective supervisio o its use. To avoid overheatig of the product, do ot expose the product to direct sulight; do ot istall or use ear a heat source such as heater, radiator, cookig devices (ex: electric stove or ove) ad other warmig devices (ex: audio amplifier, TV, etc.). Make sure to keep vetilated while usig the product. Avoid pillar or furiture that may block vetilatio, whe istallig the product. Make sure to use the power adaptor provided. If used with uidetified adaptor, it may damage the product. The power adaptor must be used with regular household electric supply. Avoid sharp, poited objects aroud the adaptor s cable, ot to damage the cable. Be wared ad ever hold the cable s stripped part whe coectig / discoectig the adaptor to/from the wall outlet. To avoid etagled cable lies, avoid usig cable extesio for adaptor s power cord. The product s servicig is allowed oly to authorized Samsug Techwi s service persoel. Whe usig the product for childre s care, be careful to keep the product out of childre s reach. The product partially cotais compoet which might cause respiratio difficulty. Accessories ad small parts of the product should be stored keepig out of childre s reach. The product is ot desiged to replace resposibility of huma supervisio o childre. The product is ot equipped with device of immediate otificatio to adult with accidetal/sudde childre s move; it requires periodic checks ad huma supervisio. This appliace ad its atea must ot be collocated or operatio i cojuctio with ay other atea or trasmitter. A miimum separatio distace of 20 cm must be maitaied betwee the atea ad the perso for this appliace to satisfy the RF exposure requiremets. Cotets GETTING STARTED Features 4 What s Icluded 5 Part ames ad fuctios 6 INSTALLATION & NETWORK CONNECTION Istallatio 8 Network Coectio ad Settigs 12 MONITORING Registratio 14 Live Video 19 Setup 21 Evet Alarm 30 Playback 30 Iformatio 31 APPENDIX Specificatios 33 Troubleshootig 37

01 GETTING STARTED Features 4 What s Icluded 5 Part ames ad fuctios 6 Power Supply 7 Coectig the Ferrite Core to the power supply adaptor 7 Network coectio 7 Features Easy to istall - Simply visit the home page (www.samsugsmartcam.com) ad dowload ad istall the program without a separate istaller program. Remote moitorig - Wheever ad wherever if you are i the Iteret eabled eviromet, remote moitorig is ready for you. - PC, laptop or smart phoe ca be used for moitorig. Real-time alarm - Whe a motio ad soud are detected, your smartphoe will geerate real time alarms. Cloud Storage - Users ca automatically upload evet photos to their Picasa accouts. - Aytime aywhere you ca ejoy the video ad images stored i the cloud storage. Savig i SD card - Whe a evet occurs, the user ca save the video i their SD card. Two-way Audio - With the built-i speakers ad microphoe, you ca make Two-way commuicatios. However, it is available oly with the smart phoe. (Not applicable to the PC or laptop computer.) SNS (Social Networkig Service) Alarm supported - Provide evet alerts (messages, photos) through Picasa or Twitter. - Share your photos with your frieds. IR LED - At low illumiatio levels, you ca use a IR LED for moitorig purposes. 4 Eglish

What s Icluded Check for compoets whe opeig the product package. 01 Camera & Bracket body Power Adaptor Network Cable Quick Start Guide Gettig Started Warraty Card GPL Lisece Double Sided Tape Tappig screw Plastic achor Ferrite Core ` Please save the packagig. You will eed the serial umber later to register the camera. 5

MODEL : SNH-P6410BN M/C : SNH-P6410BN/EX DC 5.0V 2.2A RESET Part ames ad fuctios Power / Wi-Fi status LED Built-i IR LEDs for ight visio Camera les Wi-Fi Direct butto Create a Wi-Fi coectio for your camera ad smart phoe. Reset butto Resets the camera settigs to the default. Press ad hold for about 10 secods to reboot the system. Lumiace Sesor Detects light levels where the camera is placed. Night visio mode chages accordig to detectio result. Speakers Geerate audio output from your smart phoe. SD card isertio hole SAMSUNG SMART CAM Aug 2013 S/N : XXXXXXXXXXXXXXX MAC ADDRESS : XX-XX-XX-XX-XX-XX SAMSUNG TECHWIN CO., LTD. MADE BY SAMSUNG IN CHINA NETWORK Network port Used for wireless coectio. DC 5V Power Iput Audio out Geerates audio output to exteral devices. Built-i Mic 6 Eglish

SAMSUNG SMART CAM MODEL : SNH-P6410BN M/C : SNH-P6410BN/EX Aug 2013 S/N : XXXXXXXXXXXXXXX MAC ADDRESS : XX-XX-XX-XX-XX-XX DC 5.0V 2.2A SAMSUNG TECHWIN CO., LTD. MADE BY SAMSUNG IN CHINA RESET Power Supply Plug-i the camera power adapter to the wall outlet ad coect the camera as show. ` Make sure to use the provided power adaptor. If you use a adaptor other tha the power supply adaptor provided i our package, the product may ot operate properly. ` It will take about 1mi for the camera to boot-up completely. ` Whe the boot-up is complete, the power LED color will chage from red to blue. Coectig the Ferrite Core to the power supply adaptor Ferrite Core ca stabilize the power supply. 1. Ope the Ferrite Core icluded i the package. NETWORK 2. As show i the figure, place the ferrite core about 10 cm away from the warig tag of your adaptor ad roll it up to show the two lies of power supply outside. The close the ferrite core. Network coectio Coect the provided etwork cable to the camera s etwork termial. For further details o etwork cofiguratio, refer to Network Coectio ad Settigs. (Page 12) LED status LED idicator shows operatioal status with colors. Refer to table below for detailed meaig of the LED idicator. Color Red Red Blikig Blue Blikig Blue Gree Mageta Bootig up Status Bootig completed / Establishig etwork coectio Coectig to the etwork. Local coectio established Coectio to server completed / Normal operatio Updatig firmware 01 Gettig Started 7

Istallatio 02 INSTALLATION & NETWORK CONNECTION Precautios 1. Istall the camera i a place where the Wi-Fi sigal ca be reached ad without iterferece. 2. Keep it away from humidity such as aroud the humidifier. 3. Keep it away from direct sulight, strog light or dust; istall it i a place with clear view. 4. Do ot istall it i a place where there are a lot of obstacles. 5. Keep the les clea at all times. Wipe off the dust with a soft cloth. Istallatio 8 Precautios 8 Wall Moutig Usig Double-sided adhesive tape 9 Wall Moutig with Screws 11 Desktop moutig 12 Network Coectio ad Settigs 12 Precautios 12 Coectig via etwork cable 13 Wi-Fi coectio settig 13 8 Eglish

Wall Moutig Usig Double-sided adhesive tape Separatig the wall-mout bracket 1. While pullig the butto i the back of the bracket, press the bottom of the opposite side of the butto to remove the bracket wall. SAMSUNG SMART CAM RESET MODEL : SNH-P6410BN M/C : SNH-P6410BN/EX DC 5.0V 2.2A NETWORK Aug 2013 S/N : XXXXXXXXXXXXXXX MAC ADDRESS : XX-XX-XX-XX-XX-XX SAMSUNG TECHWIN CO., LTD. MADE BY SAMSUNG IN CHINA Assemblig 1. Take out the wall fixig tape. 2. Remove the rectagular protective film from the adhesive tape ad attach it to the bottom of the wall-mout bracket. 3. Hold the hadle for the wall fixig tape, remove the release paper to attach the tape. ` The tape will lose adhesiveess if used oce, do ot re-use. ` Before attachig tape, clea dust / water / oil off the wall-mout bracket s adhesive spot for better result. 9 02 Istallatio & Network Coectio

4. Firmly isert the bracket from the opposite side of the butto util you hear a clickig soud. Adjustig the Agle 1. Adjust the camera s shootig agle as appropriate. 5. Coect the adaptor s plug to the power termial o the camera s rear side. ` RESET SAMSUNG SMART CAM DC 5.0V 2.2A Aug 2013 S/N : XXXXXXXXXXXXXXX MAC ADDRESS : XX-XX-XX-XX-XX-XX 10 Eglish MADE BY SAMSUNG IN CHINA NETWORK MODEL : SNH-P6410BN M/C : SNH-P6410BN/EX Do ot put excessive force. Otherwise, it may cause damage to the camera. 2. Ope the cap i the area marked i the figure ad use a driver to tur the screw clockwise to faste ad fix the recordig agle. 3. If you tur the screw couterclockwise, it will be looseed ad you ca adjust the recordig agle the. Whe doe, remove the protective film from the les. SAMSUNG TECHWIN CO., LTD. `

Wall Moutig with Screws ` For more iformatio about step of Separatig the wall-mout bracket, refer to Wall Moutig Usig Double-sided adhesive tape. 4. Use drill bit of 5mm diameter ad drill o the marked positios, drill to have 3 cm depth holes. Clea the holes after drillig. J ` Be careful ot to get ijured while drillig. Assemblig 1. Take out screws (M3xL20), ad achors (Φ5x25mm). 2. O a woode wall, use screws to fix the wall-mout bracket as show i the figure. Usig a driver o the wall to attach it to, faste three screws i the three holes. 3. If fixig o a cocrete wall, use screws ad achors to fix wall-mout bracket. First, mark o the wall as show i the figure below. 5. Isert a achor for each hole. Fully isert achors by hammerig lightly the achor head with a hammer/rubber hammer. 6. Usig a driver o the wall to attach it to, faste three screws i the three holes. ` For further steps, refer to the istructios for Wall Moutig Usig Double-sided adhesive tape. 11 02 Istallatio & Network Coectio

SAMSUNG SMART CAM MODEL : SNH-P6410BN M/C : SNH-P6410BN/EX Aug 2013 S/N : XXXXXXXXXXXXXXX MAC ADDRESS : XX-XX-XX-XX-XX-XX DC 5.0V 2.2A SAMSUNG TECHWIN CO., LTD. MADE BY SAMSUNG IN CHINA RESET Desktop moutig ` For more iformatio about step of Separatig the wall-mout bracket, refer to Wall Moutig Usig Double-sided adhesive tape. Assemblig 1. Firmly isert the bracket from the opposite side of the butto util you hear a clickig soud. 2. Usig the groove o the bracket wall, rotate the bracket i the desired directio. 3. Coect the adaptor s plug to the power termial o the camera s rear side. Network Coectio ad Settigs Precautios The wireless etwork access may fail, depedig o the commuicatios eviromet. For details about the etwork settigs ad password, cotact your etwork admiistrator or service provider. For a specific Iteret service requirig user autheticatio, you may ot access the service. If this is the case, cotact the service provider. Do ot access the uauthorized etwork. The farther the distace from the Wireless Access Poit, the loger time the etwork coectio may take. If you fail to access the selected wireless etwork, try a differet Wireless Access Poit to make access. For more iformatio about the router or the wireless coectio, refer to the documetatio of the router or cotact the router maufacturer. If the camera is coected to a multiple-wireless Access Poit etwork eviromet, some video packets may be lost, depedig o the etwork traffic load. Accordig to the etwork policy (blockig UDP) of the service provider, the video trasmissio ca be limited to 7 miutes. For more details, refer to the descriptios o page 21, <Relay Mode>. I additio to the above two situatios, you may ecouter a etwork delay or iterruptio due to the etwork coditios. Some hubs ca have compatibility issues. NETWORK 12 Eglish

SAMSUNG SMART CAM MODEL : SNH-P6410BN DC 5.0V 2.2A M/C : SNH-P6410BN/EX Aug 2013 S/N : XXXXXXXXXXXXXXX MAC ADDRESS : XX-XX-XX-XX-XX-XX SAMSUNG TECHWIN CO., LTD. MADE BY SAMSUNG IN CHINA SAMSUNG SMART CAM MODEL : SNH-P6410BN DC 5.0V 2.2A M/C : SNH-P6410BN/EX Aug 2013 S/N : XXXXXXXXXXXXXXX MAC ADDRESS : XX-XX-XX-XX-XX-XX SAMSUNG TECHWIN CO., LTD. MADE BY SAMSUNG IN CHINA Coectig via etwork cable Wi-Fi coectio settig If you do ot have a Wireless Access Poit, you must coect the camera usig LAN cable directly to your home router. 1. Whe you apply the power, the power status LED is lit red, ad it will chage to red blikig whe the bootig is completed. 2. Coect the etwork cable to the camera ad to the home router as show below. 3. The status LED will become steady blue oce the camera is coected to the router. (may take up to 30sec). If the status LED (blue) is ot lit, repeat steps 2 through the ed ad check it agai. 4. The status LED will became steady gree oce the camera is coected to server. OR <Hub> <Modem> Iteret Service ` It is recommeded to set the router to DHCP(Dyamic Host Cofiguratio Protocol) server. If you wat to use static IP address, please refer to <Wired Network> o page 23. ` If the router s UPP is ot set, the you might be coected i relay mode. The settigs may differ depedig o the coected Broadbad Router model. For more iformatio, refer to the user maual of the applicable router. If you wat to coect a camera to Wi-Fi, first coect the etwork cable ad try to make a coectio to the Wi-Fi etwork. 1. Whe you apply the power, the power status LED is lit red, ad it will chage to red blikig whe the bootig is completed. 2. Use the etwork cable (LAN cable) to coect the LAN port of the uit to the LAN port of the Wireless Access Poit. 3. Register ad select the camera accordig to guide of 03. Moitorig. 4. Set your wireless etwork eviromet usig the guidelie <Wireless Network> o page 24. <Wireless Access Poit> <Modem> Iteret Service ` If you wat to coect your camera to Wi-Fi, you eed a hub that supports wireless etworkig. ` Usig the camera's Wi-Fi Direct fuctio, you ca easily make a Wi-Fi coectio from your mobile phoe. ` Whe the wireless etwork settigs are completed, remove the LAN cable. ` If you fail to coect to the Iteret service, cotact the service provider for details. 13 02 Istallatio & Network Coectio

Registratio MONITORING03 Registratio 14 Evet Alarm 30 Oce you register the product with the site, you ca moitor the camera video o the PC or laptop computer. Web browser requiremets Widows Widows XP, 7 supported - Iteret Explorer 8 or higher (The 64-bit is ot supported.) - Firefox - Chrome Mac Mac OSX 10.7 Lio or higher is supported - Safari - Firefox - Chrome Web browser requiremets 14 Startig SmartCam 14 Live Video 19 Moitorig optios 20 Setup 21 Basic Ifo 21 Network 23 Time 25 Alarm & Notificatio 26 Alarm Schedule 28 SD card 29 Playback 30 Iformatio 31 My Accout 31 Support 32 Startig SmartCam 1. From your PC, lauch your web browser. 2. Go to http://www.samsugsmartcam.com. 3. Select preferred laguage. 4. Click <Sig up> or <Startig SmartCam>. 14 Eglish

Plug i istallatio 3) Click <Istall> to begi the istallatio. You eed to istall your plug i to automatically search for cameras coected to the etwork ad view the video i your camera. ` If you logi or click <Startig SmartCam> i a PC where the plug i is ot istalled, the istallatio message widow will pop up. ` Whe you istall the plug i, the web browser will be termiated ad you eed to lauch it agai. 1) Click <Dowload Plug-i>, ru the setup file. 4) Istallatio has completed. 03 For Widows 2) Click <Next>. Moitorig 15

For Mac 4) Eter MAC PC password ad click <Istall Software>. 2) Click <Cotiue>. 3) Click <Istall>. 5) Istallatio has completed. 16 Eglish

5. Eter the requested iformatio, ad click <Sig Up>. 6. Accordig to the etwork coectio ad settig, click <Next> whe the camera LED turs ito gree. ID : Usig alphabetical characters ad umbers, make a combiatio usig 8 to 14 letters. Password : Create password betwee 8 to 14 alphaumeric character. Cofirm Password : Please eter the password agai for cofirmatio. Name : Eter the user ame. E-mail : Please make sure you eter correct email address as you will have to use the email address to receive temporary ID/password whe you lost your user ID or password. 7. Select the serial umber of the camera to be added from the camera search list. If the camera is ot foud, eter the serial umber maually. 8. Click <Next>. 03 Moitorig ` Serial umber ca be foud the label o the side of the packagig or o the rear of the product. ` The computer ad the camera has to be o the same etwork router to auto detect the cameras. 17

9. Create <Camera Name> ad <Camera password>. 10. Click <Next>. 12. Select your Wireless Network from the list. 13. Eter the password of your Wireless Network ad click <Next>. ` The camera password is used to block the uauthorized access to your camera. ` Create camera password usig alphaumeric characters betwee 1 to 8 without ay space. 11. After addig the camera, click <Yes> i the wireless etwork setup pop-up widow. ` If your Wireless Network is hidde, select <Other Wi-Fi Networks (ot listed)>. ` Select <Display password> to display the password. 14. Click <OK>. 18 Eglish

15. Uplug the etwork cable from the camera ad the router. 16. Click <Fiish> if the <Fiish> butto is activated. Live Video 1. Select a camera from the camera list at the upper left had of the scree. 17. Oce the camera is successfully registered, you ca check the camera i the camera list. ` The gray ico idicates the camera is iactive so you caot moitor it right ow. 03 2. Eter the camera password ad click <Apply>. ` Check o <Remember> to access your camera without eterig the password ext time. ` If you wat to chage the Camera password, please refer to <Basic Ifo> o page 21. 3. Live video will be displayed o the scree. Moitorig 19

Moitorig optios b c WDR Item Descriptio A dark spot will be brighter ad a bright spot will be darker to compesate for the backlight. Motio zoe settig It detects motio withi the rage set by a user. Flip You ca flip over the video image. m Item Descriptio Default Camera Set the default camera to moitor i the camera list. b Delete Camera Delete the registered camera. c Cacel rememberig camera password Night Visio Cacel rememberig the camera password. If Night Visio is set <ON>, it will automatically switch to black ad white mode i the dark coditio ad the the IR lamp will automatically operate. If Night Visio is set <OFF>, it does ot switch to ight visio mode ad it will operate i color mode. Maual recordig Network Speed A user ca directly save videos i their SD card. ` 30 miute log video is saved. ` If there is a ogoig evet ow or overwrite to SD card is ot checked, ad there is storage space of 10% remaiig, you caot perform maual recordig. Set the etwork speed (low/mid/high). ` If the badwidth provided by your iteret service provider is smaller tha the recommeded value, the the video might get fuzzy or temporary discoectios or delays i the live video may be caused. Capture Image Live video is saved as oe image. Soud Whe eabled, you ca hear what s happeig aroud the camera. ` Some iteret service providers do ot support audio outputs i relay mode. Brightess You ca adjust the brightess of the scree image. m Hide/uhide detailed meu Audio Click o the [ ] ico to uhide or hide detailed settig meu. Adjust the volume of the built-i microphoe ad speaker of the camera as appropriate. If you set the mic settig to '0', you will ot hear the live audio, ad it will ot be recorded i your SD card. Note that the Two-way audio trasfer fuctio is available oly with the smart phoe applicatio. 20 Eglish

Network Speed Profile Name Resolutio Frame rate Recommeded badwidth Low Speed Network VGA 20 fps 0.7Mbps Mid Speed Network HD(720P) 15 fps 1Mbps High Speed Network Full HD(1080P) 30 fps 2.8Mbps Setup Basic Ifo ` What is relay mode? If the etwork coditio is ustable, the camera caot make a ormal coectio (P2P), so it will set up a coectio i relay mode. I this case, you will see the video for the first seve miutes oly. ` Relay mode is added feature where the video from the camera is trasmitted to Samsug server the retrasmitted to the user's computer. ` If you have trouble coectio to the camera, visit "http://www.samsugsmartcam. com", go to support page, ad refer to Troubleshootig o it. ` It is recommeded to use oe browser at oe time. ` The Night Visio video produces a differet visibility accordig to the distace betwee camera ad subject. Motio detectio area settig 1) Click the < > ico. 2) Drag it to the scree to set the detectio area. b c 03 Moitorig 3) Click o <OK>. If you wat to delete the set area, click o <Delete All>. ` The <Motio Detectio> fuctio eeds to be activated i order to use the motio zoe fuctio. 21

Item Serial umber You ca cofirm the serial umber. b Camera password Descriptio Click the <Modify>, you ca chage the Camera password. Eter the curret camera password, ad type a ew Camera password. Firmware update If the curretly used S/W is ot of the latest versio, update it. If you are usig the latest versio, the the firmware will ot be activated. 1) Click <Firmware>. c Camera Name Click the <Modify>, you ca chage the camera ame. Firmware Versio You ca check the curret versio ad the latest versio of your camera S/W. Status LED You ca tur o/off the LED i your camera. Flickerless You ca reduce the occurrece of scree shakig due to the frequecy mismatches with the eighborig lightig. 2) Click the < > ico to update the firmware. ` If you chage the camera password, you will be logged out ad retur to the camera password iput page. ` Keep the camera password i a safe place as it is used for viewig the live scree of the camera or for chagig the display settigs. 3) Whe the firmware update is fiished, the camera will reboot. ` If you wat to update the firmware, it is recommeded to use a wired etwork coectio. ` If the power goes off durig updates, it may ot operate properly. ` The duratio of the firmware update depeds o the size of the firmware file ad the etwork coectio speed. 22 Eglish

Network <Wired Network> ` If ay of the maual settigs is wrog, the etwork settigs will ot be applied. ` If you have both cable ad wireless etwork coectios simultaeously, the cable etwork coectio is prioritized. ` If you switch from the curret wireless coectio to the cable coectio, the etwork will switch to cable coectio accordigly. ` For more iformatio about the router or the wireless coectio, refer to the documetatio of the router or cotact the router maufacturer. b 03 Moitorig b Item Dyamic IP Address Static IP Address Descriptio If you select <Dyamic IP Address>, the IP address will be obtaied automatically. You must maually provide the iformatio of: IP address, subet mask, gateway, DNS server address. 23

<Wireless Network> Item Wireless O/ Wireless Off Descriptio You ca select to activate or deactivate the wireless etwork coectio. b AP (Access Poit) list You will see a list of APs (Access Poit) available. Select a desired oe from the list of APs (Access Poit). c AP (Access Poit) password If you select a secured AP (Access Poit), you must eter the password before you ca access the etwork. For the password, cotact your etwork admiistrator. b Hidde SSID If your SSID is hidde, select the type of security you have. Eter the ame of the SSID ad the password. ` If you select a o-secured AP (Access Poit), you just ca access the etwork without providig a specific password. ` If you etered a wrog password, you caot access the etwork whatsoever. ` Whe the wireless etwork settigs are completed, remove the LAN cable. If you do ot remove the LAN cable, the wireless etwork will ot be available. c 24 Eglish

Time ` The time will sychroize with the NTP(Network Time Protocol) server automatically. ` For this, Iteret coectio is required. ` You eed to set the timezoe correctly to obtai the exact time settig. ` The time displayed without Iteret coectio may ot be accurate. b c 03 Item Time Cofirm the camera's time. Descriptio Moitorig b Time Zoe Select your regio. c Display Time Select the time format displayed i time settig. Automatic Time It sets camera's time automatically. Daylight Savig Time Check this optio if you live i a coutry or regio where DST(Daylight Savig Time) is applied. Time to show Live scree displays the time. 25

Alarm & Notificatio Camera has ability to sed evet otificatios whe motio or audio is detected. <Picasa> Notificatio Automatically uploads a image to your private Picasa accout. 1. Select the Google. 2. Eter your Gmail address ad password. 3. Click <Save>. 4. Check <Use> of Picasa. Item Descriptio Alarm otificatio You ca set motio or audio alerts. Sesitivity level ca also be set. The higher the sesitivity, the more accurate motio ad audio evets ca be detected. ` Whe a evet occurs, if you wat to sed alerts to Picasa/Gmail, first log ito your google accout. ` If your Google email ID ad password are saved, check the use of Picasa oly. ` Refer to the policy of Picasa for the maximum umber of uploaded images. ` I the followig case, it may fail to derive the proper results for basic evets ad motio detectio. - The object color or brightess is similar to the backgroud. - Multiple movemets cotiue occurrig at radom due to a scee chage or other reasos. - A fixed object cotiues movig i the same positio. - A object hides other objects behid. - Two or more objects overlap or oe object divides i multiple portios. - A movig object comes close to the camera. 26 Eglish

<Gmail> Notificatio The evet alarm is set through Gmail. 1. Select the Google. 2. Eter your Gmail address ad password. 3. Click <Save>. 4. Select <Use> of Sed alarms. 5. Eter your email address to receive the otificatio e-mail ad click <Add>. Now, the receiver full email address will be show i the List Box. If you wat to register more tha oe email address, you ca just repeat the same procedure. <Twitter> Notificatio Whe a evet is detected, the otificatio message is set to the user s Twitter accout. 1. Select the Twitter. 2. Click <Request URL>. 3. Click <Access Twitter>. Twitter web page will pop-up for authorizatio. 4. Eter your Twitter user ID ad password. 5. Click o <Authorize app> to get the Access Toke. 6. You will see the pi umber geerated. Copy the pi umbers ad go back to the camera page ad paste the pi umber i the Access Toke sectio. 7. Click <Apply>. 03 <Receiver email address> ` If your Google email ID/password are saved, oly check Sed alarms. ` If the email address for the recipiet etered is icorrect, evet alerts will ot be set. ` Eve if you etered a correct google accout ID, if the ID/password cofirmatio pop up widow appears, click o <Go to the google page.> ad check the google accout. ` The alarm otificatio will be set to the specified user accout via Twitter. Moitorig 27

Push alarm Notificatio The push alarm is provided through the web viewer ad mobile app i which the camera is registered. Alarm Schedule Alarms will oly operate for the times selected by the user. b If you activated Use, the image liks uploaded ito Picasa will be set to the frieds listed i real time. Push alert list shows the list of IDs of users who registered cameras. Whe a alarm occurs, the web site will sed push alerts to each smart phoe. Item Oly Scheduled Time Descriptio Alarm fuctio will oly operate for the time/day desigated by the user. b Always Alarm fuctio always operates. 28 Eglish

SD card Whe a evet occurs, it is saved i a SD card. ` Set to <Off> before removig the SD card. Otherwise, the SD card may be damaged. ` For this camera, you are recommeded to use the followig memory cards provided from the followig makers. Micro SD/SDHC memory card : SaDisk, Trasced Recommeded Capacity : 4GB ~ 64GB ` SD card of max 65GB is supported ad a FAT32 file system is supported. Item Use the SD card Descriptio b If you set motio/audio, video will be automatically saved i your SD card. b Cotiuous Recordig Saves the video without beig iterrupted by evets that may occur. c 03 Moitorig c Overwrite If the SD card capacity is isufficiet, it will start overwritig the oldest data. ` Whe there is storage capacity of 10% remaiig, the top otificatio widow will show a alarm. SD Card Status Check the remaiig capacity of your SD card ad delete all the data. 29

Evet Alarm You ca check the evet alarm that occurred. Playback You ca play the video recorded i your SD card. c b b c Item Descriptio Item Descriptio Delete by dates Delete all the evet alarms o the date. b Image displays Select ad click o the desired evet. You ca view a image. ` Image is displayed oly if Picasa is activated. c Delete All Delete all the evet alarms for thirty days. Display Evets Displays the umber of evets occurred i the 30 day list. Arrage by types Arrage the evet list by evet types. Type Set the evet type to search for durig the search period. b Date Set the search date for the data saved i your SD card. c Play/pause Play ad pause video. Search Perform evet searches. Refresh Reew the evets displayed i timelie. Timelie Use the timelie to play the video i the desired time. 30 Eglish ` Eve if you delete a evet i the evet otificatio page, the Picasa evet will ot be deleted.

Iformatio My Accout 03 ` If you wat to chage the member iformatio, click o <Accout>. Select the item (password, or email address) ad eter your iformatio. Moitorig 31

Support You ca dowload the Samsug SmartCam mobile app ad user guide. 32 Eglish

Specificatios Specificatios APPENDIX 04 Item Video Imagig Device Effective Pixels Descriptio 1/2.8" 2M CMOS (1080P Support), SONY, FHD 1,944(H) x 1,224(V) Specificatios 33 Specificatios 33 Product Appearace 36 Troubleshootig 37 Scaig System Progressive Sychroizatio Iteral Low Light Performace 0.3Lux(Color), 0Lux(Black/White) Les Focal Legth (Zoom Ratio) 2.8mm Agular Field of View (D/V/H) 128 / 62 / 111 Mi. Object Distace 400mm Focus Cotrol Fixed Les Type Barrel type 04 Appedix 33

Item Descriptio Item Descriptio Video Aalytics Resolutio 1920x1080, 1280x720, 640x360 WDR Support (2M@15fps) Max. Framerate H.264, 1920x1080 30FPS Motio Detectio Audio Detectio Operatioal Istall O Scree Display (Web Browser) Day & Night Night visio OS White Balace Digital Zoom (viewer support) Digital Pa/Tilt (viewer support) Flip / Mirror Bootig time Network Etheret Wireless WPS (Wi-Fi Protected Setup) Wi-Fi Direct Video Compressio Format Support (ROI : 3ea) Support Easy Set-up Support True D/N Filter IR-LED, 5M Liux Auto 4X (Mobile), 10X (Web) Support Support Max 30s RJ-45 (10/100BASE-T) Wi-Fi 802.11 a/b/g/ (Dual-bad) Not Support Support (mobile) H.264, MJPEG Video Quality Adjustmet Bitrate Cotrol Method Streamig Capability Audio I/O H.264: Compressio Level MJPEG : Quality Level Cotrol H.264 : VBR with CAP MJPEG : VBR with CAP Audio Compressio Format G.711, G.726 Audio Commuicatio Protocol Security Streamig Method Max. User Access Memory Slot PC OS Support(Web viewer) Mobile OS support(mobile viewer) Multiple Streamig (Up to 4 Profiles) Support(Audio output, Moo jack) Two-way Audio (Built-i Microphoe, Speaker) Half Duplex with AEC TCP/IP, DHCP, SMTP, DNS, RTSP, RTCP, RTP, HTTP, TCP, UDP, STUN, TURN, XMPP, SIP, upnp, SNTP, IPv4, ICMP, Bojour SSL (AES 256bit) Uicast 5 users at Uicast Mode microsdxc (FAT32) Widows XP, Widows7, Widow8(Oly Desktop UI) or higher Mac OSX 10.7 or higher Adroid OS : 2.3.3/4.0/4.1/4.2/4.3 ios : 5.0/6.0/6.1/7.0 34 Eglish

Item Descriptio Fu Audio recordig User selected music record play - 3 Lullaby sogs saved - User voice recordig feature support Evirometal Operatig Temperature / Humidity Igress Protectio 0 C ~ +40 C (+32 F ~ +104 F)/20% ~ 80% RH Not Support Electrical Iput Voltage / Curret 5V DC / 2.2A Power Cosumptio Idicatio Mechaical Color / Material Max. 11W 1 LED (Power, Status, Lik) White/Silver 04 Dimesio (WxHxD) Weight 83.9 x 118.9 x 79.3 (bracket), 44.5/36.5 (body) 293g Appedix 35

Product Appearace 36 Eglish

Troubleshootig If you ecouter a problem with your system, see the table below to solve the problem as quickly ad easily as possible. Please follow the istructio below: Problem I forgot my user ID/ password. Camera is ot coected to the wireless hub. After logged i, I failed to register the camera. Actio - Move to Log-i page Forgot your ID/Password?, ad eter the registered e-mail address to which we will sed you the user ID ad/or a ew password. It ca be spammed out depedig o the policy of the email server. After logged i, it is advisable to chage the temporary password provided. - If the camera's wireless iteret idicatio LED goes off too ofte, the it meas that the camera istallatio locatio is ot optimal for the wireless iteret eviromet, so i this case, locate the camera close to the wireless hub ad try to coect agai. - Check the password for the wireless hub ad try agai. - Check that the serial umber etered matches the label o the back of the camera. - Eter the correct password for the camera registered agai ad try to register the camera agai. - Check the camera LED to see if it is gree. If ot, the check the etwork coectio. - If you are still uable to register the camera after this, the reset the camera to factory settigs ad begi agai. (If you wat to reset to factory settigs, press ad hold the iitialize butto o the back for 10 sec. Oce iitialized to factory settigs, the camera will be restarted.) Problem The capture images i the camera will ot be uploaded to Picasa. No camera alerts are set to Twitter. The video from the camera is temporarily lost. No soud is output from the video. I forgot my Camera password. Actio - Move to Setup Alarm & Notificatio ad adjust the sesitivity as ecessary. - From the Alarm & Notificatio setup, cofigure the Picasa otificatio settigs. (See page 26 of the maual) - Picasa has differet service policies accordig to the coutry. The policy for your coutry may prohibit uploadig to Picasa. Please first check the Picasa policy for your coutry. - Accordig to the Picasa policy, it may limit the uploadig size. Check the allowable free space of your Picasa accout, ad if isufficiet, delete the exitig images. - Move to Setup Alarm & Notificatio ad adjust the sesitivity as ecessary. - From the Alarm & Notificatio setup, cofigure the Twitter otificatio settigs. (See page 27 of the maual) - The video from the camera ca be delayed accordig to a etwork delay. Please check if the camera is istalled i a place of proper wireless Iteret commuicatios. - Click the Voice ico i the video playback page, or check if the voice is tured O i your smart phoe app. - Some iteret service providers do ot support audio outputs i relay mode. - You must create a ew camera password. - Press the iitializatio butto o the back of the product for more tha 10 secods to reset to factory settigs. - After factory iitializatio, whe you access the camera, you ca reset the password for the camera. 04 Appedix 37

Problem I wat to chage my password ad/or email address. Camera will be coected i a relay mode. Actio - After loggig i, click o the <Accout>. Select the item (password, or email address) ad eter your iformatio. - Check the UPP settig of the router. - Usig a etwork upload speed of 500Kbps or higher is recommeded. - Depedig o the policy of your service provider, you ca access i relay mode. Samsug Techwi cares for the eviromet at all product maufacturig stages, ad is takig measures to provide customers with more evirometally friedly products. The Eco mark represets Samsug Techwi s devotio to creatig evirometally friedly products, ad idicates that the product satisfies the EU RoHS Directive. Correct Disposal of This Product (Waste Electrical & Electroic Equipmet) (Applicable i the Europea Uio ad other Europea coutries with separate collectio systems) This markig o the product, accessories or literature idicates that the product ad its electroic accessories (e.g. charger, headset, USB cable) should ot be disposed of with other household waste at the ed of their workig life. To prevet possible harm to the eviromet or huma health from ucotrolled waste disposal, please separate these items from other types of waste ad recycle them resposibly to promote the sustaiable reuse of material resources. Household users should cotact either the retailer where they purchased this product, or their local govermet office, for details of where ad how they ca take these items for evirometally safe recyclig. Busiess users should cotact their supplier ad check the terms ad coditios of the purchase cotract. This product ad its electroic accessories should ot be mixed with other commercial wastes for disposal. 38 Eglish

SALES NETWORK SAMSUNG TECHWIN CO., LTD. Samsug Techwi R&D Ceter, 6, Pagyo-ro 319beo-gil, Budag-gu, Sogam-si, Gyeoggi-do 463-400, Korea TEL : +82-70-7147-8740~60 FAX : +82-31-8018-3745 SAMSUNG TECHWIN AMERICA Ic. 100 Challeger Rd. Suite 700 Ridgefield Park, NJ 07660 Toll Free : 1-877-349-3149 www.samsugsv.com SAMSUNG TECHWIN EUROPE LTD. Samsug House, 1000 Hillswood Drive, Hillswood Busiess Park Chertsey, Surrey, UNITED KINGDOM KT16 OPS TEL : +44-1932-45-5300 FAX : +44-1932-45-5325