Micro Contactors Micro Contactor Relays 0 Micro Contactors Micro Contactors With Solder Pins Coil voltages Micro Reversing Contactor 3 Technical Data 4 Dimensions 8 9
Micro Contactor Relays 4pole C Operated RatingsTherm. Contacts 2) Coil voltage ) Distinc. dditional 50/60Hz Number Contact 2 50Hz/60Hz C5 Rated Current 400 I th acc. to Blocks Pack Weight NO NC EN500 pcs. kg/pc. 4pole, With Screw Terminals 3,5 5 4 40E K004D40... 0 3,5 5 3 3E K004D3... 0 3,5 5 2 2 22E K004D22... 0 K004D40 K004D3 K004D22 ) Other coil voltages on request. 2) Contacts suitable for electronic circuits, according to EN94754 for rated voltage DC (test ratings 7 DC, 5m). Positively guided contacts. 0
Micro Contactors C Operated Power Ratings C2, C3 C 380 400 660 45 690 Rated Current ux. Contacts2) Builtin dditional 440 NO NC Coil voltage ) 50/60Hz 2 50Hz/60Hz Pack pcs. W Weight kg/pc. 3pole, With Screw Terminals K005D0... 0 K005D0... 0 K005D0040... 0 4pole, With Screw Terminals K005D0 K005D0 K005D0040 ) Other coil voltages see page. 2) Contacts suitable for electronic circuits, according to EN94754 for rated voltage DC (test ratings 7 DC, 5m). Positively guided contacts.
Micro Contactors C Operated Power Ratings Rated Current C2, C3 C 380 400 660 45 690 690 ux. Contacts2) Built dditional in NO NC Coil voltage ) 50/60Hz 2 50Hz/60Hz Pack pcs. W Weight kg/pc. 3pole, with Solder Pins Ø,5 for Printed Circuit pplications xxx3) K005L0... 0 xxx3) K005L0... 0 0 4pole, with Solder Pins Ø,5 for Printed Circuit pplications xxx3) K005L0 K005L0040... K005L0 K005L0040 Coil voltages for C operated contactors Suffix to contactor type e.g. K09D0 48 oltage Marking Rated Control oltage Us at the coil for for 50Hz 60Hz range for 50Hz min. max. 48 48 90 95 00 00 9500 00 00 050 05 05 0 80 050 05 50 05 22 38,5 48 for 60Hz min. max. Suffix to contactor type e.g. K09D0 oltage Marking Rated Control oltage Us at the coil for for 50Hz 60Hz range for 50Hz min. max. 50 48 52 20 20525 20 90 95 00 00 00 05 00 05 0 05 0 5 0 0 05 0 85 0 5 5 0 0 5 20 2 250 95 205 20 205 25 0 250 0 250 260 Standard voltages in bold type letters Operating range of magnetcoils: 0,85 x Us (min. value of rated control voltage) up to, x Us (max. value of rated control voltage) Coil not exchangeable ) Other coil voltages see page. 2) Contacts suitable for electronic circuits, according to EN94754 for rated voltage DC (test ratings 7 DC, 5m). Positively guided contacts. 3) Data on request. for 60Hz min. max.
Micro Reversing Contactors, Mechanical Interlocked C Operated Power Ratings Rated Current C2, C3 380 400 660 45 690 C ux. Contacts2) Builtin dditional on left on right hand side hand side Contactor Contactor 690 NO NC K K2 Coil voltage ) 50/60Hz 2 50Hz/60Hz W Pack pcs. Weight kg/pc. 3pole, with Screw Terminals K0W05D0MC... 0,4 K0W05D0MC... 0,4 K0W05D0040MC... 0,4 4pole, with Screw Terminals 3pole, with Solder Pins Ø,5 for Printed Circuit pplications xxx3) K0W05L0MC... 0,4 xxx3) K0W05L0MC... 0,4 K0W05D0MC K0W05D0MC K0W05D0040MC ) Other coil voltages see page. 2) Contacts suitable for electronic circuits, according to EN94754 for rated voltage DC (test ratings 7 DC, 5m). Positively guided contacts. 3) Data on request. 3
Micro Contactors Data according to IEC 609474, DE 0660, EN 609474 Main Contacts K005D.. Rated insulation voltage U i C 480 ) Making capacity I eff at U e = 440 C 65 Breaking capacity I eff 400 C 50 cosϕ = 0,65 Utilization category C Switching of resistive load Rated operational current I e (=I th ) at 40 C, open Rated operational power of threephase resistive loads 4,7 5060Hz, cosj = 0 4,8 400 8,3 45 8,6 480 9,5 Rated operational current I e (=I th ) at 60 C, enclosed 8 Rated operational power of threephase resistive loads 3, 5060Hz, cosj = 0 3,3 400 5,5 45 5,7 480 6,5 Minimum crosssection of conductor at load with I e (=I th ) mm²,5 Utilization category C2 and C3 Switching of threephase motors Rated operational current I e 6,2 open and enclosed 6,2 0 5,6 380400 5 45440 5 480 5 Rated operational power of threephase motors 2,5 5060Hz 380440 480 Utilization category C4 Switching of squirrel cage motors, inching Rated operational current I e 4,9 open and enclosed 4,9 0 4, 380400 5 45440 5 480 5 Rated operational power of threephase motors 2, 5060Hz 380440 480 ) Suitable at 690 for: earthedneutral systems, overvoltage category I to III, pollution degree 3 (standardindustry): Uimp = 4k. Data for other conditions on request. 4
Micro Contactors Data according to IEC 609474, DE 0660, EN 609474 Main Contacts Utilization category DC Switching of resistive load Time constant L/R ms Rated operational current Ie K005D.. pole 60 0 3 poles in series 60 0 C C C C 40 to +60 (+90) ) 40 to +40 25 to +60 25 to +40 C 50 to +90 Utilization category DC3 and DC5 Switching of shunt motors and series motors Time constant L/R 5ms Rated operational current Ie pole 60 0 3 Pole in Serie 60 0 Maximum ambient temperature Operation open enclosed open enclosed with therminal overload relay Storage Short circuit protection for contactors without thermal overload relay Coordinationtype "" according to IEC 9474 Contact welding without hazard of persons max. fuse size gl (gg) 20 Coordinationtype 2 according to IEC 9474 Light contact welding accepted max. fuse size gl (gg) Contact welding not accepted max. fuse size gl (gg) For contactors with thermal overload relay the device with the smaller admissible backup fuse (contactor or thermal overload relay) determines the fuse size. Cable crosssections for contactors main connector solid or stranded flexible flexible with multicore cable end Cables per clamp mm² mm² mm² 0,5,5 0,5,5 0,5,5 2 WG 20 4 without load C3, Ie C4, Ie DC3, Ie /h /h /h /h 0000 600 0 600 Sx Sx 06 06 3 xxx2) 0scurrent 50 at Ie /C3 400 W 0,2 NO NC g g 2,5 2,5 solid or stranded Frequency of operation z contactors without therminal oberload relay Mechanical life C operated DC operated Short time current Power loss per pole Resistance to shock according to IEC 68227 Shock time 20ms sinewave C operated ) With reduced control voltage range 0,9 up to,0 x Us and with reduced rated current Ie /Caccording to Ie /C3. 2) Data on request. 5
Micro Contactors Data according to IEC 609475, DE 0660, EN 609475 uxiliary Contacts K004D.. K005D.. Rated insulation voltage U i C 440 ) Thermal rated current I th bis 440 mbient temperature 40 C 5 60 C 3 erlustleistung pro Pol bei I th W 0,25 Utilization category C5 Rated operational currrent I e 2 3 38045,5 440 Utilization category DC3 Rated operational current I e 60 0,5 Maximum ambient temperature Operation open C 40 bis +60 (+90) 2) enclosed C 40 bis +40 Storage C 40 bis +90 Short circuit protection shortcircuit current k, contact welding not accepted max. fuse size gl (gg) 0 For contactors with thermal overload relay the device with the smaller admissible control fuse (contactor or thermal overload relay) determines the fuse size. Power consumption of coils C operated inrush 9 sealed 4 W,8 Operation rage of coils in multiples of control voltage U s 0,85, Switching time at control voltage U s ±0% C operated make time ms 3 8 release time ms 5 0 arc duration ms 0 5 DC operated make time ms release time ms arc duration ms Cablecrosssection all connectors solid mm 2 0,5,5 flexible mm 2 0,5,5 flexible with multicore cable end mm 2 0,5,5 Clamps per pole 2 solid or stranded WG 20 4 3) 4) ) Suitable at 690 for: earthedneutral systems, overvoltage category I to III, pollution degree 3 (standardindustry): Uimp = 4k. Data for other conditions on request. 2) With reduced control voltage range 0,9 up to,0 x U s and with reduced thermal rated current I th to I e /C5. 3) Summary switching time = release time + arc duration. 4) Release time of NC make time of NO increase when suppressor units for voltage peak protection are used (aristor, RCunits, Diode units). 5) Data on request. 6
Micro Contactors for North merica Data according to UL508 Main Contacts (culus) Rated operational current "General Use" 5 00 208 2 277 440480 550600 ½ ½ 00 208 2 ½6 ½ ¾ Rated operational power of three motors at 60Hz (3ph) Rated operational power of C motors at 60Hz (ph) K005D.. K0W05D0.. K004D.. Fuse / Shortcircuit current /k 30/5 Rated voltage C 300 300 C DC B300 R300 B300 R300 uxiliary Contacts (culus) Motor Rating Pn = C4 heavy pilot duty standard pilot duty Motor Rating Pn = C3 Breaking Current Ia ( = Ie = C) Millions of Operations 7
Micro Contactors Dimensions C operated with screw terminals K004D.. K005D.. C operated with solder connections K004L.. K005L.. Reversing Contactors with screw terminals K0W05D..MC Reversing Contactors with solder connections K0W05L..MC 8