Description Part-No. Type PU. Nominal voltage DC12V Relais-SNR 12V 1W 20 DC 24 V Relais-SNR 24V 1W 20

Size: px
Start display at page:

Download "Description Part-No. Type PU. Nominal voltage DC12V 768001 Relais-SNR 12V 1W 20 DC 24 V 768002 Relais-SNR 24V 1W 20"

Transcription

1 Replacement relay, 1COcontact, 6 A, : AgSnO 2,AgSnO 2 +5 µm HV Relay with AgSnO 2 Nominal voltage DC12V Relais-SNR 12V 1W Relais-SNR 24V 1W 20 DC 60 V Relais-SNR 60V 1W 20 Relay with AgSnO 2 +5µmHV Nominal voltage DC 12 V Relais-SNR 12V 1WHTV Relais-SNR 24V 1WHTV 20 DC 60 V Relais-SNR 60V 1WHTV 20 Input Nominal voltage DC: 12to60V Input voltage DC: ±30 % Rated current A Power comsumption DC: 170 mw Interrupting voltage DC: >0.1 U n Input characteristic impedance 1change over contact AgSnO 2 :AC/DC 17 V; AgSnO 2 +5 µm HV: AC/DC 1V AgSnO 2 :AC/DC 5mA, AgSnO 2 +5µmHV: AC/DC 1mA 6A at24v:1a, at 115 V:200 ma, at230 V: 100 ma Inrush current 10 A(4ms) Resistor AgSnO 2 :<100 mω; AgSnO 2 +5 µm HV: <30mΩ AgSnO 2 /AgSnO 2 +5 µm HV Switching frequency with load: 6cycles/minute, without load 1,200 cycles/minute > operations Switch-on delay 5ms Switch-off delay 2.5 ms Air clearance: >6 mm, creep clearance: >8mm AC 250 V Overvoltage category III Pollution degree 3 Protection class RTIII -wash-tight Shock resistance 5g Vibration resistance 6g, Hz Operation temperature range C Storage temperature range C (w h d) mm Weight (kg/piece) Approvals VDE, culus Termination plug-in 1.36

2 AC/DC-Relay-Interface, 1, Relay with 1 CO contact, pluggable, 6A,, contact material: AgSnO 2 Nominal voltage DC 12 V RE DC12V RE DC24V 5 AC/ RE AC/ 5 AC/DC 115 V RE AC/DC 115 V 5 AC/DC 230 V RE AC/DC 230 V 5 Nominal voltage DC 12 V RE DC12V RE DC24V 5 AC/ RE AC/ 5 AC/DC 115 V RE AC/DC 115 V 5 AC/DC 230 V RE AC/DC 230 V 5 DC 12 V, AC/ AC/DC 115 V,AC/DC 230 V Input DC 12 V DC24V AC/ AC/DC 115 V AC/DC 230 V Input voltage range V V V V V Rated current 15.0mA 14.0mA 21.0mA 5.0 ma Interrupting voltage <2 V < 2.4 V <11 V <23 V Bridge rectifier Reverse diode Bridge rectifier 50 V 150 V 250 V Max. length ofconnecting lead DC: 2000 m DC: 500 m DC: 500 m 2000 m AC: 100 m AC: 70m AC: 40m Rated frequency Hz 1 change over contact AC/DC 17V AC/DC 5mA at24v:1a, at 115 V:200 ma, at230 V: 100 ma AgSn0 2 >5 x10 6 operations Switch-on delay 5ms 7 ms 8ms Switch-off delay 4ms 7ms 13 ms PA 6.6 (UL 94 V-0) Operationtemperature range -25 C 60 C (w h d) mm Weight (kg/piece) Approvals culus Termination Screw-/spring terminal mm 2 6Ajumper comb red Ajumper comb white Ajumper comb blue Replacement relay for 76X Relay SNR 24V 1W 20 Spare relay for 76X822 /76x Relay SNR 12V 1W 20 Replacement relay for 76X826 / Relay SNR 60V 1W 20 76X827 Tag holder 4 11 mm white BZT Isolation plate TP For operation with rated voltage and 100% EDover 24h/day, adistance of = 10mmmustbecomplied with between the modules ortothe neighboring switching components. 1.37

3 AC/DC-Relay-Interface, 1 Relay with 1 CO contact, pluggable,6a, Screw-/spring terminal, contact material: AgSnO 2 +5µmHV Nominal voltage RE HTV 5 AC/ RE HTV AC/ 5 AC/DC 115 V RE HTV AC/DC 115 V 5 AC/DC 230 V RE HTV AC/DC 230 V 5 Nominal voltage RE HTV 5 AC/ RE HTV AC/DC 24V 5 AC/DC 115 V RE HTV AC/DC 115 V 5 AC/DC 230 V RE HTV AC/DC 230 V 5 AC/ AC/DC 115V,AC/DC 230 V Input AC/ AC/DC 115 V AC/DC 230 V Input voltage range V V V V Rated current 14.0 ma 21.0 ma 5.0 ma Interrupting voltage <2.4 V <11 V <23 V Overload diode Bridge rectifier 50 V 150 V 250 V Max. length of connecting lead DC: 2000 m DC: 500 m 2000 m AC: 100 m AC: 70m 250 m Rated frequency Hz 1change over contact AC/DC 1V AC/DC 1mA at24v:1a, at 115 V:200 ma, at230 V: 100 ma AgSn0 2 +5µmHV >5 x10 6 operations 5x10 6 operations Switch-on delay 5ms 7 ms 8ms Switch-off delay 4ms 7ms 13 ms PA 6.6 (UL 94 V-0) Operation temperature range -25 C 60 C (w h d) mm Weight (kg/piece) Approvals culus Termination Screw-/spring terminal mm 2 6Ajumper comb red Ajumper comb white Ajumper comb blue Replacement relay for 76X Relay SNR 24V 1W HTV 20 Replacement relay for 76X Relay SNR 12V 1W HTV 20 Replacement relay for 76X926 / Relay SNR 60V 1W HTV Tagholder 4 11 mm white BZT Isolation plate TP Hard gold-plated contacts: So that the gold layer is not damaged, the specified values are not permitted tobeexceeded. At higher switching capacity, the gold layer vaporizes. The deposition in the housing can lead to sparkovers between the coil and contact. For operation with rated voltage and 100% EDover 24h/day, adistance of =10mmmust be complied with between the modules or to theneighboring switching components. 1.38

4 AC/DC-Relay-Interface, 1 Relay with 1 CO contact,6a, Screw-/spring terminal, contact material: AgSnO 2 Nominal voltage DC12V RE DC12V 5 AC/ RE AC/ 5 AC/DC 120 V RE AC/DC 120 V 5 AC/DC 230 V RE AC/DC 230 V 5 Nominal voltage AC/ RE AC/ 5 AC/DC 120 V RE AC/DC 120 V 5 AC/DC 230 V RE AC/DC 230 V 5 Input DC 12 V AC/DC 24V AC/DC 120 V AC/DC 230 V Input voltage range V V V V Rated current 16.0 ma 22.0 ma 7.0 ma 3.5 ma Interrupting voltage <1.5 V <2.4 V 11V <23 V Bridge rectifier 50 V 150 V Max. length of connecting lead Rated frequency Hz 1change over contact AC/DC 17V AC/DC 5mA 3 A at 24 V: 1A;at115 V: 200 ma; at 230 V:100 ma AgSnO2 > 5x10 7 operations Switch-on delay 5ms 10 ms Switch-off delay 5ms 10ms 15ms Inrush current 16 A, 4ms PPE Operation temperature range -25 C 60 C (w h d) mm Weight (kg/piece) Approvals culus, not culus Termination Screw-/spring terminal mm 2 Jumper comb 24-pin, 26 A blue BK Tagholder 4 11 mm white BZT For operation with rated voltage and 100% ED over 24h/day, adistance of =10mmmust be complied with between the modules or to theneighboring switching components. 1.42

5 AC/DC-Relay-Interface, 1 Relay with 1 CO contact, 6A, Screw-/spring terminal, contact material: AgSnO 2 +5µmHV Nominal voltage AC/ RE HTV AC/ 5 AC/DC 230V RE HTV AC/DC 230V 5 AC/DC 120 V RE AC/DC 120 V 5 Nominal voltage AC/ RE HTV AC/ 5 Input AC/ AC/DC 230 V AC/DC 120 V Input voltage range V V V Rated current 22.0 ma 3.5 ma 7.0 ma Interrupting voltage <2.4 V <23 V <11 V Bridge rectifier 50 V 150 V Max. length ofconnecting lead Rated frequency Hz 1 change over contact AC/DC 1V AC/DC 1mA at24v:1a; at 115 V: 200 ma; at230 V: 100 ma AgSnO2+ 5µmHV >5x10 7 operations Switch-on delay 5 ms 10 ms 5ms Switch-off delay 10 ms 15 ms 10 ms Inrush current 16 A, 4ms PPE Field installation railts35(en 50022) Operationtemperature range -25 C 60 C (w h d) mm Weight (kg/piece) Approvals culus Termination Screw-/spring terminal mm 2 Jumper comb 24-pin, 26 A blue BK Tag holder 4 11 mm white BZT Hard gold-plated contacts: So that the gold layer isnot damaged, the specified values are not permitted to be exceeded. At higher switching capacity, the gold layer vaporizes. The deposition inthe housing can lead tosparkovers between the coil and contact. For operation with rated voltage and 100% ED over 24h/day, adistance of =10mmmust be complied with between the modules ortothe neighboring switching components. 1.43

6 AC/DC-Relay-Interface,1 Relay with 1 CO contact, 6A, Screw/spring terminal, contact material AgSnO 2 Nominal voltage DC 12 V RE DC12V RE DC24V 5 AC/ RE AC/ 5 AC/DC 115 V RE AC/DC 115 V 5 AC/DC 230 V RE AC/DC 230 V 5 Nominal voltage DC 12 V RE DC12V RE DC24V 5 AC/ RE AC/ 5 AC/DC 115 V RE AC/DC 115 V 5 AC/DC 230 V RE AC/DC 230 V 5 DC 12 V, AC/ AC/DC 115 V,AC/DC 230 V Input DC 12 V DC24V AC/ AC/DC 115 V AC/DC 230 V Input voltage range V V V V V Rated current 17.0 ma 10.0 ma 20.0 ma 4.0 ma 3.5 ma Interrupting voltage <2 V <2.4 V <11 V <23 V Reverse- / overload diode Bridge rectifier 50 V 150 V 250 V Max. length ofconnecting lead DC: 500 m DC: 500 m 2000 m AC: 70 m AC: 40 m Rated frequency Hz 1 change over contact AC/DC 17V AC/DC 5mA at24v:1a; at 115 V:200 ma; at230 V: 100 ma AgSnO2 >5x10 6 operations Switch-on delay 5ms 8 ms Switch-off delay 4ms 13 ms PA 6.6 (UL 94 V-0) Operationtemperature range -25 C 60 C (w h d) mm Weight (kg/piece) Approvals Termination Screw-/spring terminal mm 2 6Ajumper comb red Ajumper comb white Ajumper comb blue Tag holder 4 11 mm white BZT Isolation plate TP For operation with rated voltage and 100% EDover 24h/day, adistance of = 10mmmustbecomplied with between the modules ortothe neighboring switching components. 1.51

7 Interface Technology Microcompact Solid State Relay Semiconductor relay, 2-conductor technology Switching element max. /10 A, AC 230 V/0.75 A Screw-/ 76x120, 76x320, 76x321, 76x322 76x323, 76x340 Derating Nominal voltage DC 5 V OT load /0.5 A OT /0.5 A OT /2 A OT /5 A OT /10 A OT AC 230 V/0.75A Nominal voltage DC 5 V OT load /0.5 A OT /0.5 A OT /2 A OT /5 A OT /10 A AC 230 V/0.75A OT Input 76x120 76x320 76x321 76x322 76x323 76x340 Input voltage range V V Rated current > 4.5 ma > 4 ma Interrupting voltage <2 V < 10 V <15 V Varistor Rated frequency Switching element MosFet, NO contact Triac, NO contact (zero-voltage switching) DC 10 V AC 20 V DC 48 V AC 240 V 1 ma 10 ma 1 ma 5 ma 10 A (Derating) 0.5 A 2 A 5 A 0.75 A Inrush current Leakage current < 50 µa 1 ma Switch-on delay < 150 µs < 250 µs < 150 µs < 10 ms Switch-off delay < 300 µs < 2ms < 300 µs < 10 ms Switching frequency 1 khz 50 Hz 1 khz 100 Hz 10 Hz output Suppressor diode Varistor PA, UL 94-V0 kv eff Operation temperature range 70 C (w h d) mm Weight (kg/piece) Approvals Termination Screw-/spring terminal mm 2 6 A jumper comb red A jumper comb white A jumper comb blue Tag holder 4 11 mm white BZT

8 Interface Technology Microcompact Solid State Relay Semiconductor relay, 2-conductor technology Switching element max. /0.5 A, AC 230 V/0.75 A Semiconductor relay, 2-conductor technology Nominal voltage AC 230 V OT AC 230 V OT Nominal voltage AC 230 V OT AC 230 V OT Input 76x350 76x341 Nominal voltage AC 230 V Load /0.5 A AC 230 V/0.75 A Input voltage range V V Rated current <4 ma Interrupting voltage <20 V <110 V Varistor Rated frequency Switching element Transistor Triac DC 10 V AC 20 V DC 48 V AC 240 V 10 ma 5 ma 0.5 A 0.75 A Inrush current Leakage current 50 µa <1 ma Switch-on delay < 2 ms <10 ms Switch-off delay <1 ms <10 ms Switching frequency 1 khz 3 Hz output Suppressor diode Varistor/RC PA, UL 94-V0 Operation temperature range -25 C 70 C Storage temperature range -40 C 80 C (w h d) mm Weight (kg/piece) Approvals Termination : mm mm 2 6 A jumper comb red A jumper comb white A jumper comb blue Tag holder 4 11 mm white BZT Isolation plate TP Labels for laser printer A4 unpunched LEB-A

9 Semiconductor relay, 2-conductor technology Switching element, 2 A Screw-/ Nominal voltage DC24V OT DC24V 5 Nominal voltage OT DC24V 5 Derating Input Input voltage range V Rated current 12.0 ma Interrupting voltage 10 V Supressor diode LEDgreen Rated frequency Switching element MosFet, N/O contact Switching element AC/DC 2V AC/DC 253 V AC/DC 1mA AC/DC 2A(Derating) Inrush current AC/DC 8A;10ms Leakage current Switch-on delay 0.5 ms Switch-off delay 0.5 ms Switching frequency 500 Hz >4 mm output Varistor PA6.6 (UL 94V-0) 5.0 kv eff Operation temperature range -25 C 60 C (w h d) mm Weight (kg/piece) Approvals Termination Screw-/spring terminal mm 2 6Ajumper comb red Ajumper comb white Ajumper comb blue Tag holder 4 11 mm white BZT Isolation plate TP Inductive loads must be wired with asuitable suppressor element! 1.54

10 DC-Relay-Interface, 2 Relay with 1 CO contact, 6A, Screw-/spring terminal, contact material: AgSnO 2 Nominal voltage RE DC24V 5 Nominal voltage RE DC24V 5 +A A A A22 23 Input Input voltage range V Rated current 10.0 ma Interrupting voltage <2.4 V Reverse- /overload diode 50 V Max. length ofconnecting lead 2000 m Rated frequency each relay 2 1NOcontact AC/DC 17 V AC/DC 5mA at24v:1a, at 115 V: 200 ma, at 230 V:100 ma AgSnO2 >5x10 6 opertions Switch-on delay 5ms Switch-off delay 4ms PA 6.6 (UL 94 V-0) Operationtemperature range -25 C 60 C (w h d) mm Weight (kg/piece) Approvals Termination Screw-/spring terminal mm 2 6Ajumper comb red Ajumper comb white Ajumper comb blue Tag holder 4 11 mm white BZT For operation with rated voltage and 100% EDover 24h/day, adistance of = 10mmmustbecomplied with between the modules ortothe neighboring switching components. 1.55

48.12. 2 pole, 8 A Safety relay. Screw terminal. 35 mm rail (EN 60715) mounting. 2 CO (DPDT) 8/15 250/400 2,000 500 0.37 8/0.65/0.

48.12. 2 pole, 8 A Safety relay. Screw terminal. 35 mm rail (EN 60715) mounting. 2 CO (DPDT) 8/15 250/400 2,000 500 0.37 8/0.65/0. 48 Series - Relay interface modules 8 A Features 48.12 2 Pole Safety relay interface modules, 15.8 mm wide 48.12-2 Pole 8 A (screw terminal) DC sensitive coils Relay with forcibly guided contacts according

More information

48 SERIES Relay interface modules 10 A

48 SERIES Relay interface modules 10 A 48 Relay interface modules 10 A 1 CO relay interface modules, mm wide Ideal interface for PLC and electronic systems Type 48.P3 1 CO 10 A s Type 48.31 1 CO 10 A s AC coils or DC sensitive coils Supply

More information

49 Series - Relay interface modules 8-10 - 16 A. Features

49 Series - Relay interface modules 8-10 - 16 A. Features Features 1 & 2 Pole relay interface modules 5 µm Gold plate contacts for low level switching capability 49.31-50x0-1 Pole 10 A (screw terminal) 49.52-50x0-2 Pole 8 A (screw terminal) 49.72-50x0-2 Pole

More information

0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N

0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N 55 Series - General purpose relays 7-10 A Features 55.12 55.13 55.14 Printed circuit mount, general purpose 2, 3 & 4 Pole relays 55.12-2 Pole 10 A 55.13-3 Pole 10 A 55.14-4 Pole 7 A AC coils & DC coils

More information

38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 - 16 A

38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 - 16 A 38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 - 16 A 38 SERIES Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit EMR Electromechanical

More information

38 SERIES. Relay interface modules 0.1-2 - 3-5 - 6-8 - 16 A. EMR Electromechanical Relays. Common features. SSR Solid State Relays. 6.

38 SERIES. Relay interface modules 0.1-2 - 3-5 - 6-8 - 16 A. EMR Electromechanical Relays. Common features. SSR Solid State Relays. 6. 38 Relay interface modules 0.1-2 - 3-5 - 6-8 - 16 A 38 Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit 6.2 mm wide EMR - DC, AC or AC/DC

More information

DEK-REL- 24/1/SEN. Extract from the online catalog. Order No.: 2964050

DEK-REL- 24/1/SEN. Extract from the online catalog. Order No.: 2964050 Extract from the online catalog DEK-REL- 24/1/SEN Order No.: 2964050 Relay terminal block for sensor, with soldered-in miniature relays, contact (AgNi+Au): small to medium loads, 1 N/O contact, input voltage

More information

38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 A

38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 A 38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 A Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit EMR Electromechanical Relays

More information

Example of use: Fuse for a solenoid valve. If the fuse is defective, no information is sent to the electronic component.

Example of use: Fuse for a solenoid valve. If the fuse is defective, no information is sent to the electronic component. Overview Switch and button modules The dimensions of the switch and button modules are adapted to the electronic components in the integral housing. The modules are equipped with the universal clip-on

More information

1 pole, 16 A Screw terminal connection 35 mm rail (EN 60715) mounting. 2 pole, 8 A Screw terminal connection 35 mm rail (EN 60715) mounting

1 pole, 16 A Screw terminal connection 35 mm rail (EN 60715) mounting. 2 pole, 8 A Screw terminal connection 35 mm rail (EN 60715) mounting Series - Relay interface modules 8-10 - 16 A Features.01.02 1 & 2 pole relay interface modules, screw terminal socket, mm wide. Ideal interface for PL and electronic systems.01-1 Pole 16 A.02-2 Pole 8

More information

Safety technique. Emergency stop module BO 5988 safemaster

Safety technique. Emergency stop module BO 5988 safemaster Safety technique Emergency stop module BO 5988 safemaster 0221562 Function diagram Pushbutton on Mains or emergencystop () K1 According to EC Directive for machines 98/37/EG According to IEC/E 60204-1

More information

SKR - industry relay

SKR - industry relay SKR - industry relay the universal relay SKR the time module STM the socket The strengths of the SKR industry relay lie in the mature and thoughtout construction. Over-average contact safety and life time,

More information

60 Series - General purpose relays 6-10 A. Features 60.12 60.13

60 Series - General purpose relays 6-10 A. Features 60.12 60.13 Features 60.12 60.13 Plug-in mount 10 A General purpose relay 2 & 3 pole changeover contacts Cadmium Free contacts (preferred version) AC coils & DC coils UL Listing (certain relay/socket combinations)

More information

RY2 miniature industrial relays

RY2 miniature industrial relays 6 RY2 Relays of general application For plug-in sockets, 35 mm rail mount acc. to PN-EN 60715 or on panel mounting Flat insert connectors - faston x 0,5 mm Recognitions, certifications, directives: RoHS,

More information

40 Series - Miniature PCB/Plug-in relays 8-10 - 16 A. Features 40.31 40.51 40.52

40 Series - Miniature PCB/Plug-in relays 8-10 - 16 A. Features 40.31 40.51 40.52 Features 40.31 40.51 40.52 1 & 2 Pole relay range 40.31-1 Pole 10 A (3.5 mm pin pitch) 40.51-1 Pole 10 A (5 mm pin pitch) 40.52-2 Pole 8 A (5 mm pin pitch) PCB mount - direct or via PCB socket 35 mm rail

More information

MasterINTERFACE 39 Series - Relay interface modules

MasterINTERFACE 39 Series - Relay interface modules MasterINTERFACE 39 Series - Relay interface modules Common features Space saving 6.2 mm wide Connections for 16-way jumper link Integral coil indication and protection circuit Secure retention and easy

More information

Mini Motor Contactor J7KNA Main contactor Accessories Approved Standards Standard Guide No (US,C) Ordering Information tage Model Number Legend gear

Mini Motor Contactor J7KNA Main contactor Accessories Approved Standards Standard Guide No (US,C) Ordering Information tage Model Number Legend gear Mini Motor Contactor J7KNA ) Main contactor AC & DC operated Integrated auxiliary contacts Screw fixing and snap fitting (35 mm DIN-rail) Range from 4 to 5.5 (AC 3, 380/415V) 4 -main pole version (4 AC

More information

34 Series - Slim electromechanical PCB relays 6 A. Features SERIES 34.51

34 Series - Slim electromechanical PCB relays 6 A. Features SERIES 34.51 34 Series - Slim electromechanical PCB relays 6 34 SERIES Features 34.51 Ultra-slim 1 Pole - 6 relay Printed circuit mount - direct or via PCB socket 35 mm rail mount - via screw, screwless or push-in

More information

Electronic timer CT-VBS.17+18 OFF-delayed without auxiliary voltage, for DC contactors Data sheet

Electronic timer CT-VBS.17+18 OFF-delayed without auxiliary voltage, for DC contactors Data sheet Characteristics Single-function OFF-delay timer for DC contactors, without auxiliary voltage Width.5 mm CDC 5 6 F3 Approvals A culus E CCC CT-VBS a Circuit diagram b Marker label Marks a CE b C-Tick Order

More information

MULTIFUNCTION TIME RELAY CRM-93H

MULTIFUNCTION TIME RELAY CRM-93H 4 MULTIFUNCTION TIME RELAY CRM-93H - 10 functions Features: Universal supply voltage AC/DC 12-240V 10 functions: - 5 time functions controlled by supply voltage - 4 time functions controlled by control

More information

Micro Contactors. Micro Contactor Relays. Micro Contactors With Solder Pins. Coil voltages. Micro Reversing Contactor. Technical Data.

Micro Contactors. Micro Contactor Relays. Micro Contactors With Solder Pins. Coil voltages. Micro Reversing Contactor. Technical Data. Micro Contactors Micro Contactor Relays 0 Micro Contactors Micro Contactors With Solder Pins Coil voltages Micro Reversing Contactor 3 Technical Data 4 Dimensions 8 9 Micro Contactor Relays 4pole C Operated

More information

MasterINTERFACE 39 Series - Relay interface modules

MasterINTERFACE 39 Series - Relay interface modules MasterINTERFACE 39 Series - 39 Common features Space saving 6.2 mm wide Connections for 16-way jumper link Integral coil indication and protection circuit Secure retention and easy ejection by plastic

More information

E-STOP relays, safety gate monitors

E-STOP relays, safety gate monitors Unit features Safety features Gertebild ][Bildunterschrift_NOT_Sch.tuer_Licht Safety relay for monitoring E-STOP pushbuttons, safety gates and light beam devices Approvals Gertemerkmale Positive-guided

More information

Pluggable interface relays CR-P Pcb relays

Pluggable interface relays CR-P Pcb relays 2CDC 293 034 F0004 1 2 4 3 Features 9 different supply s: DC versions: 12 V, 24 V, 48 V, 110 V AC versions: 24 V, 48 V, 110 V, 120 V, 230 V Output contacts: 1 c/o (16 A) or 2 c/o (8 A) Cadmium-free contact

More information

1 POLE - 16A 80A Inrush type. (b) Contact configuration A : 1 form A (SPST-NO) C : 1 form C (SPDT) (standard type "K" only)

1 POLE - 16A 80A Inrush type. (b) Contact configuration A : 1 form A (SPST-NO) C : 1 form C (SPDT) (standard type K only) FTR-K1 SERIES POWER RELAY 1 POLE - 16A 80A Inrush type FTR-K1 Series FEATURES Peak 80A inrush current (1 form A type) Low profile (height: 15.7mm) HIGH INSULATION Insulation distance (between coil and

More information

JUMPFLEX 857 Series. 0...20 ma 2...10 V. 4...20 ma. Transducers / Relay and Optocoupler Modules

JUMPFLEX 857 Series. 0...20 ma 2...10 V. 4...20 ma. Transducers / Relay and Optocoupler Modules 0888-0172/0002-3601 JUMPFLEX 857 Series 2.0 E 12/08 Printed in Germany Subject to design changes 2...10 V 0...20 ma 4...20 ma WAGO Kontakttechnik GmbH & Co. KG Postfach 2880 32385 Minden Hansastraße 27

More information

Process modules Digital input PMI for 24 V DC inputs for 120 V AC inputs

Process modules Digital input PMI for 24 V DC inputs for 120 V AC inputs E031026 000823 Process modules Digital input PMI for inputs for 120 V AC inputs PMI Input E4, E5, GND L- PMI 120 V AC Input E4, E5, Common C E6, E7, GND L- E6, E7, Common C LEDs for the inputs operation

More information

RM4TG20 three-phase network control relay RM4-T - range 200..500 V

RM4TG20 three-phase network control relay RM4-T - range 200..500 V Characteristics three-phase network control relay RM4-T - range 200..500 V Complementary [Us] rated supply voltage Output contacts Setting accuracy of time delay Delay at power up Measuring cycle Marking

More information

Voltage monitoring relays CM-ESS.2 For single-phase AC/DC voltages

Voltage monitoring relays CM-ESS.2 For single-phase AC/DC voltages Data sheet Voltage monitoring relays CM-ESS.2 For single-phase AC/DC voltages The CM-ESS.2 is an electronic voltage monitoring relay that provides reliable monitoring of voltages as well as detection of

More information

Voltage monitoring relays CM-ESS.M For single-phase AC/DC voltages

Voltage monitoring relays CM-ESS.M For single-phase AC/DC voltages Data sheet Voltage monitoring relays CM-ESS.M For single-phase AC/DC voltages The CM-ESS.M is an electronic voltage monitoring relay that provides reliable monitoring of voltages as well as detection of

More information

Modular I/O System Analog and Digital Interface Modules

Modular I/O System Analog and Digital Interface Modules OPERATING INSTRUCTIONS Modular I/O System Analog and Digital Interface Modules Installation Operation Maintenance Document Information Document ID Title: Operating Instructions Modular I/O System Part

More information

LC1D65AM7 TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 65 A - 220 V AC coil

LC1D65AM7 TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 65 A - 220 V AC coil Product data sheet Characteristics LC1D65AM7 TeSys D contactor - 3P(3 NO) - AC-3 -

More information

RM35UA13MW. range 15..600 V. Main. Product or component type. Relay monitored parameters

RM35UA13MW. range 15..600 V. Main. Product or component type. Relay monitored parameters Characteristics multifunction voltage control relay RM35-U - range 15..600 V Complementary Reset time Maximum switching voltage [Us] rated supply voltage Supply voltage limits Power consumption in W Main

More information

Cable Plug acc. to DIN EN 175301-803, Form A

Cable Plug acc. to DIN EN 175301-803, Form A Cable Plug acc. to DIN EN 175301-803, Form A Complete program Contact form 18 mm Also available with LED indicator Optional 4-pin version for pressure switch or impulse valves respectively Versions with

More information

AC/DC Power Modules C B. TML Series, 20 & 40 Watt. Features. 20 Watt Models

AC/DC Power Modules C B. TML Series, 20 & 40 Watt. Features. 20 Watt Models TML Series, 0 & 0 Watt Features C B Scheme LVD UL 090- Encapsulated power supplies with increased power density Replaces TML and TML 0 series PCB mount or chassis mount with screw terminals Single, dual

More information

1 POLE - 16A 80A Inrush type. (a) Relay type FTR-K1 : FTR-K1-Series

1 POLE - 16A 80A Inrush type. (a) Relay type FTR-K1 : FTR-K1-Series FTR-K1 SERIES POWER RELAY 1 POLE - 16A 80A Inrush type FTR-K1 Series FEATURES Peak 80A inrush current (1 form A type) Low profile (height: 15.7mm) High insulation Insulation distance (between coil and

More information

Solid-State Relays. Series Included. Solid-State Relays SIR...145 SLR...146 NLF...147. PHS Series PHS...148

Solid-State Relays. Series Included. Solid-State Relays SIR...145 SLR...146 NLF...147. PHS Series PHS...148 Solid-State Relays Included SIR....145 SLR....146 NLF....147 PHS PHS....148 Solid-State Relays 144 www.ssac.com 800-843-8848 fax: 605-348-5685 Solid-State Relay - Isolated SIR1 & SIR2 Designed for industrial

More information

MICROSENS. Central 48 V DC Power Supplies for PoE-Components. Description. Features

MICROSENS. Central 48 V DC Power Supplies for PoE-Components. Description. Features Central 48 V DC Power Supplies for PoE-Components MICROSENS Description Active network equipment which is supporting the Power-over-Ethernet functions, typically requires a powerful 48 V DC power supply.

More information

ABB 1 NEW. Three-phase monitoring relay for grid feeding CM-UFS.1. Data sheet. Features. Approvals. Marks. Order data. Order data - Accessories

ABB 1 NEW. Three-phase monitoring relay for grid feeding CM-UFS.1. Data sheet. Features. Approvals. Marks. Order data. Order data - Accessories 2CDC 251 014 F0t09 Features Monitoring of three-phase mains for grid feeding Type-tested in accordance with DIN V VDE V 0126-1-1: February 2006 Neutral conductor connection configurable Can also be used

More information

VEO. V4PF480Y/277VSYTK02 Art.Nr.: 2104200. V4PF480Y/277VSYTK02P Art.Nr.: 2104210 TECHNICAL DATA

VEO. V4PF480Y/277VSYTK02 Art.Nr.: 2104200. V4PF480Y/277VSYTK02P Art.Nr.: 2104210 TECHNICAL DATA Monitoring of phase sequence and phase loss Monitoring of asymmetry Temperature monitoring (PTC) Supply voltage 208-480 V AC Supply circuit = measuring circuit 2 change-over contacts Width 45 mm Control

More information

Digital Pressure Measuring Instrument MDR480

Digital Pressure Measuring Instrument MDR480 Description The digital panel instrument MDR480 is designed to measure, display, and monitor pressures in industrial applications. The instrument is panel mounted with a front frame dimension of 96 mm

More information

MONITORING RELAYS. w VOLTAGE MONITORING RELAY UR5U1011. w SCHRACK-INFO. w TECHNICAL DATA

MONITORING RELAYS. w VOLTAGE MONITORING RELAY UR5U1011. w SCHRACK-INFO. w TECHNICAL DATA w VOLTAGE MONITORING RELAY UR5U1011 w SCHRACK-INFO AC/DC voltage monitoring in 1-phase mains Undervoltage monitoring 1 change over contact Width 17.5 mm Installation design w TECHNICAL DATA 502 1. Functions

More information

Elesta Elektrotechnik AG industry relays and accessories

Elesta Elektrotechnik AG industry relays and accessories Elesta Elektrotechnik AG industry relays and accessories edition 003 table of contents SKR-industry relay 4 SKR-screw socket with accessories 4 SFR-industry relay 6 SFR-screw socket with accessories 7

More information

Thermistor motor protection

Thermistor motor protection Thermistor motor protection CM-E Range Thermistor motor protection Thermistor motor protection relays Benefits and advantages Selection table Operating principle and fields of application for thermistor

More information

General Purpose Relays Accessories. Accessories Miniature Relay PT

General Purpose Relays Accessories. Accessories Miniature Relay PT Miniature Relay PT n Easy replacement of relays on a densely packed DIN rail n No reduction of protection class or creepage/clearance with plastic retainer n Plug-in indicator- and protection modules n

More information

Fixed - Over/Under voltage limits, (0.75...1.2) U N respectivity Link selectable - 5 min or 10 min delay. Fixed limits

Fixed - Over/Under voltage limits, (0.75...1.2) U N respectivity Link selectable - 5 min or 10 min delay. Fixed limits Features 71.11.8.230.0010 71.11.8.230.1010 1 - Phase 230 V Over & Under voltage monitoring relays 71.11.8.230.0010 - Fixed Over & Under voltage detection - Link selectable 5 or 10 minute lock-out delay

More information

Single-phase (220...240 V) voltage monitoring: Undervoltage Overvoltage Window mode (overvoltage + undervoltage) Voltage fault memory selectable

Single-phase (220...240 V) voltage monitoring: Undervoltage Overvoltage Window mode (overvoltage + undervoltage) Voltage fault memory selectable Features 70.11 70.31 70.41 Electronic voltage monitoring relays for single and three-phase applications Multifunctional types, providing the flexibility of monitoring Undervoltage, Overvoltage, Window

More information

Solid-State Relays (SSRs) vs Electromechanical Relays (EMRs)

Solid-State Relays (SSRs) vs Electromechanical Relays (EMRs) Oct 2010 Solid-State Relays (SSRs) vs Electromechanical Relays (EMRs) A study on worldwide relays market found the market size of solid state relays to be between $200M and $600M, which represent 17% of

More information

Power Supply Unit, Primary Switched, Narrow Design MINI-PS-12-24DC/24DC/1

Power Supply Unit, Primary Switched, Narrow Design MINI-PS-12-24DC/24DC/1 Power Supply Unit, Primary Switched, Narrow Design MINI POWER provides: Extra narrow design with widths of 22.5 mm, 45 mm, and 67.5 mm (0.886, 1.772, and 2.657 in.) Global use due to a wide-range input

More information

These tables allow you to quickly select only the items, then check if all product s technical data meet your application requirements.

These tables allow you to quickly select only the items, then check if all product s technical data meet your application requirements. These tables allow you to quickly select only the items, then check if all product s technical data meet your application requirements. Number of relays Input rated voltage type / no. of contacts Output

More information

2 POLES - 5A LOW PROFILE TYPE

2 POLES - 5A LOW PROFILE TYPE FTR-K1 SERIES POWER RELAY 2 POLES - 5A LOW PROFILE TYPE FTR-F1 Series FEATURES Low profile (height: 16.5mm) DPST/DPDT 5A, TV-3 rating available High insulation (due to its reinforced insulation construction)

More information

Your Advantages For safety application up to PL e / Cat. 4 e.g. SIL 3 Manual or automatic start 0225592. * see variants. Applications.

Your Advantages For safety application up to PL e / Cat. 4 e.g. SIL 3 Manual or automatic start 0225592. * see variants. Applications. Safety Technique SAFEMASTER Emergency Stop Module BG 5924, IP 5924 Your Advantages For safety application up to PL e / Cat. 4 e.g. SIL 3 Manual or automatic start 0225592 BG 5924 IP 5924 Product Description

More information

Thermal-Magnetic Circuit Breaker 3120-...-M1-..

Thermal-Magnetic Circuit Breaker 3120-...-M1-.. Thermal-Magnetic Circuit Breaker -...-M-.. Description Single or two pole rocker switch/thermal-magnetic circuit breaker with trip-free mechanism (S-type TM CBE to EN 34). The addition of a magnetic tripping

More information

Current valve. for AC 24 V pulse/pause control of electrical loads up to 30 kw

Current valve. for AC 24 V pulse/pause control of electrical loads up to 30 kw 4 937 DESIO Current valve for AC 24 V pulse/pause control of electrical loads up to 30 kw SEA45.1 Use The current valve is used for the control of electric heating elements in heating, ventilation and

More information

General-purpose Relay

General-purpose Relay General-purpose Relay An Improved Miniature Power Relay with Many Models for Sequence Control and Power Applications A wide range of relay variations including ones with operation indicators, high-capacity

More information

Type: EASY719 DC RC Article No.: 274119. Ordering information Relay outputs Quantity 6 Power supply V DC 24 V DC. Description

Type: EASY719 DC RC Article No.: 274119. Ordering information Relay outputs Quantity 6 Power supply V DC 24 V DC. Description Type: EASY719 DC RC Article.: 274119 Ordering information Relay outputs Quantity 6 Power supply V DC 24 V DC Description 12 digital inputs (4 inputs available as analog inputs) 6 relay outputs LCD display

More information

Temperature monitoring relays CM-TCS Monitoring relays for monitoring temperatures with a PT100 sensor (2- or 3-wire connection)

Temperature monitoring relays CM-TCS Monitoring relays for monitoring temperatures with a PT100 sensor (2- or 3-wire connection) Data sheet Temperature monitoring relays CM-TCS Monitoring relays for monitoring temperatures with a PT100 sensor (2- or 3-wire connection) The temperature monitoring relays CM-TCS monitor overtemperature,

More information

DS 600. A contact free flux gate based current measurement sensor 600A rms

DS 600. A contact free flux gate based current measurement sensor 600A rms DS 600 A contact free flux gate based current measurement sensor 600A rms DS 600 is member of the small housing sensor family. The family includes a 200A and a 600A version. 600A rms - 900A peak Maximum

More information

Quick Connect. quick - simple - efficient. www.g-mw.de

Quick Connect. quick - simple - efficient. www.g-mw.de Quick Connect quick - simple - efficient www.g-mw.de Phone: +49 9103 7129-0 Fax: +49 9103 7129-207 Innovative connection technology to plug three single-phase current transformers to multifunctional power

More information

Voltage monitoring relays CM-ESS.2 For single-phase AC/DC voltages

Voltage monitoring relays CM-ESS.2 For single-phase AC/DC voltages Data sheet Voltage monitoring relays CM-ESS.2 For single-phase AC/DC voltages The CM-ESS.2 is an electronic voltage monitoring relay that provides reliable monitoring of voltages as well as detection of

More information

AutoRanging Digital MultiMeter

AutoRanging Digital MultiMeter Owner's Manual AutoRanging Digital MultiMeter Model No. 82139 CAUTION: Read, understand and follow Safety Rules and Operating Instructions in this manual before using this product. Safety Operation Maintenance

More information

Type: DILM115(RAC240) Article No.: 239548 Sales text Contactor,55kW/400V,AC operated. Ordering information

Type: DILM115(RAC240) Article No.: 239548 Sales text Contactor,55kW/400V,AC operated. Ordering information Type: DILM115(RAC240) Article No.: 239548 Sales text Contactor,55kW/400V,AC operated Ordering information Connection technique Description Description Rated operational current Screw terminals 3 pole AC

More information

ISOMETER IRDH275. Insulation monitoring device for unearthed AC, AC/DC and DC systems (IT systems) Vorläufiges Datenblatt

ISOMETER IRDH275. Insulation monitoring device for unearthed AC, AC/DC and DC systems (IT systems) Vorläufiges Datenblatt Insulation monitoring device for unearthed AC, AC/DC and DC systems (IT systems) Vorläufiges Datenblatt TDB106015en/05.2013 Insulation monitoring device for unearthed AC, AC/DC and DC systems (IT systems)

More information

1a/1c 5A/10A small power relays

1a/1c 5A/10A small power relays VDE a/c A/A small power relays RELAYS RoHS compliant FEATURES High electrical noise immunity High switching capacity in a compact package High sensitivity: mw (a), mw (c) High surge voltage:, V between

More information

47000 SERIES - ELECTRONIC TRANSFORMERS

47000 SERIES - ELECTRONIC TRANSFORMERS 7000 SERIES - ELECTRONIC TRANSFORMERS MYRRA encapsulated electronic transformers are Switched Mode Power Supplies based on Flyback topology. They constitute an interesting alternative to the traditional

More information

1 POLE - 8A Medium Load Control

1 POLE - 8A Medium Load Control POWER RELAY 1 POLE - 8A Medium Load Control JS Series FEATURES UL class B (130 C) coil wire insulation 1 form A (SPST-NO) or 1 form C (SPDT) contact Low profile and space saving - Height: 12.5 mm - Mounting

More information

RM17TE 183...528 V AC. Main. Product or component type. Product specific application. Relay monitored parameters 250 V DC 5 A DC

RM17TE 183...528 V AC. Main. Product or component type. Product specific application. Relay monitored parameters 250 V DC 5 A DC Characteristics multifunction control relay RM17-TE - range 183..528 V AC Complementary Reset time Maximum switching voltage Minimum switching current Maximum switching current [Us] rated supply voltage

More information

Reyrolle Protection Devices. 7PG17 - XR Intertripping, Interposing, Supervision and Special Purpose Relays. Answers for energy

Reyrolle Protection Devices. 7PG17 - XR Intertripping, Interposing, Supervision and Special Purpose Relays. Answers for energy Reyrolle Protection Devices 7PG17 - XR Intertripping, Interposing, Supervision and Special Purpose Relays. Answers for energy Siemens Protection Devices Limited 2 7PG17 XR101 & XR102 Intertripping Relay

More information

Panel Meters and Controllers Modular Panel Meter Type EDM 35

Panel Meters and Controllers Modular Panel Meter Type EDM 35 Panel Meters and Controllers Modular Panel Meter Type EDM 35 Modular digital panel meter, 3 1/2-digit Indicating or controlling current, voltage, resistance, temperature, tacho or frequency. Easy programming

More information

Power Supplies 3. SDN-P DIN Rail Series

Power Supplies 3. SDN-P DIN Rail Series SDN-P DIN Rail Series The SDN DIN Rail power supplies provide industry leading performance. Sag Immunity, transient suppression and noise tolerant, the SDN series ensures compatibility in demanding applications.

More information

EMOSAFE EN-100. Network Isolators for PCB assembly 1 GENERAL DESCRIPTION. Product Data Sheet ENGLISH

EMOSAFE EN-100. Network Isolators for PCB assembly 1 GENERAL DESCRIPTION. Product Data Sheet ENGLISH ENGLISH EMOSAFE EN-100 Product Data Sheet Network Isolators for PCB assembly November 2013 1 GENERAL DESCRIPTION The EMOSAFE EN-100 Network Isolator interrupts all galvanically conducting connections (conductors

More information

93.68/93.69. Time scale: from 0.1s to 6h Multi-function For use with 34.51 (EMR) and 34.81 (SSR) relays. Screw terminal and push-in terminal

93.68/93.69. Time scale: from 0.1s to 6h Multi-function For use with 34.51 (EMR) and 34.81 (SSR) relays. Screw terminal and push-in terminal Series - Timed socket for 34 series Features.68/.69 Slim timed sockets for 34 series, 6.2 mm wide Timer adjustment via top mounted rotary knob accessible after assembly Control signal terminal DIP-switch

More information

w BREAKING CAPACITY W EMPLOYMENT 1) Locking function description

w BREAKING CAPACITY W EMPLOYMENT 1) Locking function description Relaiskatalog_E:MODUL2000.QXD 18.08.2009 13:18 Uhr Seite 14 INTERFACE RELAYS XT 14 W INTERFACE PLUG-IN RELAYS XT 1 pole 16 A, 2 pole 8 A, 1 CO contact or 2 CO contacts DC- or AC coil, sensitive coil 400mW

More information

1 Form A Solid State Relay

1 Form A Solid State Relay 1 Form A Solid State Relay Vishay Semiconductors DIP i1791- SMD DESCRIPTION Vishay solid state relays (SSRs) are miniature, optically coupled relays with high-voltage MOSFET outputs. The LH1518 relays

More information

Installation Contactors. Technical Catalogue. Type ESB. abb. ABB STOTZ-KONTAKT GmbH 1 2CDC 103002 C0201

Installation Contactors. Technical Catalogue. Type ESB. abb. ABB STOTZ-KONTAKT GmbH 1 2CDC 103002 C0201 Technical Catalogue Installation Contactors Type ESB abb ABB STOTZ-KONTAKT GmbH 1 CDC 10300 C001 ABB STOTZ-KONTAKT GmbH CDC 10300 C001 Low Voltage Products and Systems We ensure safety and comfort for

More information

Throughbeam photoelectric sensors. Dimensioned drawing. Electrical connection

Throughbeam photoelectric sensors. Dimensioned drawing. Electrical connection Specifications and description Leuze electronic LS 78 Throughbeam photoelectric sensors Dimensioned drawing 180m 10-30 V DC! Voltage range from 12 30VDC with NPN, PNP and/or relay outputs! Light/dark switching!

More information

Specifications for EM223 24 VDC 4 In/4 Out and EM223 24 VDC 4 In/4 Relay Out

Specifications for EM223 24 VDC 4 In/4 Out and EM223 24 VDC 4 In/4 Relay Out SIMATIC S7-200 EM223 Digital Combination Modules EM223 2 VDC In/ Out and EM223 2 VDC In/ Relay Out Table 1 Specifications for EM223 2 VDC In/ Out and EM223 2 VDC In/ Relay Out EM223 2VDC In/Out 6ES7 2231BF200XA0

More information

RISH CON - Hz. Salient Features : Application : Product Features: FREQUENCY TRANSDUCER

RISH CON - Hz. Salient Features : Application : Product Features: FREQUENCY TRANSDUCER Application : The RISH CON - Hz transducer is used for frequency measurement. The output signal is proportional to measured frequency and is either load independent DC Current or load independent DC Voltage.

More information

LED - Indicator Panels

LED - Indicator Panels energy management systems 09 LED - Indicator Panels Standard LED - Indicator Panels LM...72, LM...96, LM...144 page 9/1 Indicator panels with 3 color LEDs SM...96 page 9/9 LED - INDICATOR PANELS LED-Indicator

More information

80 Series - Modular timers 16 A. Features 80.01 80.11

80 Series - Modular timers 16 A. Features 80.01 80.11 80 Series - Modular timers 16 A Features 80.11 Multi-function and mono-function timer range - Multi-function & multi-voltage 80.11 - On-delay, multi-voltage 17.5 mm wide Six time scales from 0.1s to 24h

More information

Kit 106. 50 Watt Audio Amplifier

Kit 106. 50 Watt Audio Amplifier Kit 106 50 Watt Audio Amplifier T his kit is based on an amazing IC amplifier module from ST Electronics, the TDA7294 It is intended for use as a high quality audio class AB amplifier in hi-fi applications

More information

1 POLE - 16A / Inrush 120A relay. (a) Relay type FTR-K1 : FTR-K1 Series (b) Contact configuration A : 1 form A C : 1 form C

1 POLE - 16A / Inrush 120A relay. (a) Relay type FTR-K1 : FTR-K1 Series (b) Contact configuration A : 1 form A C : 1 form C FTR-K1 SERIES POWER RELAY 1 POLE - 16A / Inrush 120A relay FTR-K1-KS Series FEATURES 1 pole 16A, 1 form A or 1 form C Peak inrush current 120A / TV-8 Coil power 400mW High insulation in small package (between

More information

Auto-ranging Digital Multimeter 52-0052-2 INSTRUCTION MANUAL

Auto-ranging Digital Multimeter 52-0052-2 INSTRUCTION MANUAL Auto-ranging Digital Multimeter 52-0052-2 INSTRUCTION MANUAL WARNING: READ AND UNDERSTAND THIS MANUAL BEFORE USING YOUR MULTIMETER. FAILURE TO UNDERSTAND AND COMPLY WITH WARNINGS AND OPERATING INSTRUCTIONS

More information

Digital Expansion Modules Specifications

Digital Expansion Modules Specifications S7200 Programmable Controller System anual Digital Expansion odules Specifications Table A11 Digital Expansion odules Order umbers Order umber Expansion odel Digital Inputs Digital Outputs Removable Connector

More information

Positive-guided relay outputs: 3 safety contacts (N/O), instantaneous. 1 auxiliary contact (N/C), instantaneous

Positive-guided relay outputs: 3 safety contacts (N/O), instantaneous. 1 auxiliary contact (N/C), instantaneous Safety relay for monitoring E-STOP pushbuttons. Approvals Unit features Positive-guided relay outputs: 3 safety contacts (N/O), instantaneous 1 auxiliary contact (N/C), instantaneous Safe separation of

More information

MCR-VDC-UI-B-DC. Voltage Transducer for DC Voltages. INTERFACE Data Sheet 100260_en_01. 1 Description

MCR-VDC-UI-B-DC. Voltage Transducer for DC Voltages. INTERFACE Data Sheet 100260_en_01. 1 Description Voltage Transducer for DC Voltages TERFACE Data Sheet 000_en_0 PHOENIX CONTACT - /00 Description The MCR voltage transducer measures DC voltages in several signal ranges from 0... ±0 V DC to 0... ±0 V

More information

0.9V Boost Driver PR4403 for White LEDs in Solar Lamps

0.9V Boost Driver PR4403 for White LEDs in Solar Lamps 0.9 Boost Driver for White LEDs in Solar Lamps The is a single cell step-up converter for white LEDs operating from a single rechargeable cell of 1.2 supply voltage down to less than 0.9. An adjustable

More information

Inductive Sensors Single or Dual Loop Detectors Type LD with teach-in

Inductive Sensors Single or Dual Loop Detectors Type LD with teach-in Inductive Sensors Single or Dual Loop Detectors Type LD with teach-in Single or Dual loop detector Automatically adjustment of detection level Manual sensitivity for compensations of variations Easy installation

More information

Goodsky Technical Data. Contact Details

Goodsky Technical Data. Contact Details Goodsky Technical Data The following page(s) are extracted from multi-page Goodsky product catalogues or CDROMs and any page number shown is relevant to the original document. The PDF sheets here may have

More information

STEP-PS/1AC/12DC/1.5. Extract from the online catalog. Order No.: 2868567. DIN rail power supply unit 12 V DC/1.5 A, primary switched-mode, 1- phase

STEP-PS/1AC/12DC/1.5. Extract from the online catalog. Order No.: 2868567. DIN rail power supply unit 12 V DC/1.5 A, primary switched-mode, 1- phase Extract from the online catalog STEP-PS/1AC/12DC/1.5 Order No.: 2868567 DIN rail power supply unit 12 V DC/1.5 A, primary switched-mode, 1- phase Commercial data EAN 4046356292924 Pack 1 pcs. Customs tariff

More information

SILENT POWER RELAY. FTR-H3 Series. 1 POLE - 78A/120A Inrush Current Type FTR-K1 SERIES FEATURES

SILENT POWER RELAY. FTR-H3 Series. 1 POLE - 78A/120A Inrush Current Type FTR-K1 SERIES FEATURES FTR-K1 SERIES SILENT POWER RELAY 1 POLE - 78A/120A Inrush Current Type FTR-H3 Series FEATURES Pin compatible with widely used VS and FTR-H1 series power relays Silent relay with patented unique U-shape

More information

Automation Solutions. LÜTZE LCOS empty housing for Industrial Automation

Automation Solutions. LÜTZE LCOS empty housing for Industrial Automation Automation Solutions LÜTZE LCOS empty housing for Industrial Automation Open, modular, universal: The new intelligent electronic housing LÜTZE LCOS Flexible: Use of the housing as a standalone solution

More information

Safety automation solutions

Safety automation solutions Operating principle, characteristics Preventa safety s types XPS AV,, For and switch monitoring Operating principle Safety s XPS AV, and are used for monitoring circuits conforming to standards EN/ISO

More information

Model Number Structure

Model Number Structure General-purpose Relay G2RS Slim and Space-saving Power Plug-in Relay Lockable test button models now available. Built-in mechanical operation indicator. Provided with nameplate. AC type is equipped with

More information

Model Number Structure

Model Number Structure General-purpose Relay G2RS Slim and Space-saving Power Plug-in Relay Lockable test button models now available. Built-in mechanical operation indicator. Provided with nameplate. AC type is equipped with

More information

E-STOP relays, safety gate monitors

E-STOP relays, safety gate monitors Gertebild ][Bildunterschrift Safety relay for monitoring E-STOP pushbuttons and safety gates. Unit features Gertemerkmale Positive-guided relay outputs: 2 safety contacts (N/O), instantaneous Connection

More information

UM-X Field display for continous level sensors

UM-X Field display for continous level sensors Technical Documentation Field display for continous level sensors 10/2007 Edition: 1 Item No.: 207120 FAFNIR GmbH Bahrenfelder Str. 19 D-22765 Hamburg Telephone: +49 (0)40-39 82 07-0 Fax: +49 (0)40-3 90

More information

LAUBE TECHNOLOGY DRY REED RELAYS

LAUBE TECHNOLOGY DRY REED RELAYS LAUBE TECHNOLOGY DRY REED RELAYS CONTACT FORM CURRENT PART SERIES PAGE #'S (1A) SPST-NO 1 AMP D41A...0L 147~148 (Link) (1A) SPST-NO 1 AMP D71A.1.0 149~150 (Link) (1A) SPST-NO 1 AMP F51A.100 151~152 (Link)

More information

POWER RELAY. JV Series. 1 POLE - 5A/10A Medium Load Control FTR-K1 SERIES FEATURES

POWER RELAY. JV Series. 1 POLE - 5A/10A Medium Load Control FTR-K1 SERIES FEATURES FTR-K1 SERIES POWER RELAY 1 POLE - 5A/10A Medium Load Control JV Series FEATURES UL, CSA, VDE, SEMKO, CQC recognized UL class B (130 C) wire class Low profile and space saving - Height: 12.5 mm - Mounting

More information

MODEL TUHS3F05 TUHS3F12 TUHS3F24 VOLTAGE[V] AC85-264 1f DC120-370

MODEL TUHS3F05 TUHS3F12 TUHS3F24 VOLTAGE[V] AC85-264 1f DC120-370 AC-DC Power Supplies PCB Mount Type TUHS3 Ordering information TUH S 3 F 05 1 2 3 4 5 R 1 Series name 2 Single output 3 Output wattage 4 Universal Input 5 Output voltage *Avoid short circuit between +BC

More information