LC1D65AM7 TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 65 A V AC coil

Transcription

1 Product data sheet Characteristics LC1D65AM7 TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 65 A V AC coil Apr 15, The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein. This documentation is not inted as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications. It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof. Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein. *Prices are indicative

2 Price*: USD Main Commercial Status Range of product Product or component type Device short name Contactor application Utilisation category Poles description Pole contact composition [Ue] rated operational voltage [Ie] rated operational current Motor power kw Motor power hp Control circuit type Control circuit voltage Auxiliary contact composition [Uimp] rated impulse withstand voltage Overvoltage category [Ith] conventional free air thermal current Irms rated making capacity Rated breaking capacity [Icw] rated short-time withstand current Associated fuse rating Average impedance Commercialised TeSys D Contactor LC1D Motor control Resistive load AC-1 AC-3 3P 3 NO <= 300 V DC for power circuit <= 690 V AC Hz for power circuit 65 A (<= 140 F (60 C)) at <= 440 V AC AC-3 for power circuit 80 A (<= 140 F (60 C)) at <= 440 V AC AC-1 for power circuit 37 kw at V AC 50/60 Hz 37 kw at 500 V AC 50/60 Hz 30 kw at V AC 50/60 Hz 18.5 kw at V AC 50/60 Hz 50 hp at 575/600 V AC 50/60 Hz for 3 phases motors 20 hp at 230/240 V AC 50/60 Hz for 3 phases motors 20 hp at 200/208 V AC 50/60 Hz for 3 phases motors 10 hp at 230/240 V AC 50/60 Hz for 1 phase motors 5 hp at 115 V AC 50/60 Hz for 1 phase motors 40 hp at 460/480 V AC 50/60 Hz for 3 phases motors AC 50/60 Hz 220 V AC 50/60 Hz 1 NO + 1 NC 6 kv conforming to IEC III 80 A at <= 140 F (60 C) for power circuit 10 A at <= 140 F (60 C) for signalling circuit 1000 A at 440 V for power circuit conforming to IEC A DC for signalling circuit conforming to IEC 140 A AC for signalling circuit conforming to IEC 1000 A at 440 V for power circuit conforming to IEC A <= 104 F (40 C) 1 min power circuit 110 A <= 104 F (40 C) 10 min power circuit 900 A <= 104 F (40 C) 1 s power circuit 520 A <= 104 F (40 C) 10 s power circuit 140 A 100 ms signalling circuit 120 A 500 ms signalling circuit 100 A 1 s signalling circuit 125 A gg at <= 690 V coordination type 2 for power circuit 125 A gg at <= 690 V coordination type 1 for power circuit 10 A gg for signalling circuit conforming to IEC 1.50 mohm at 50 Hz - Ith 80 A for power circuit 2

3 [Ui] rated insulation voltage Electrical durability Power dissipation per pole Protective cover Mounting support 600 V for signalling circuit certifications UL 600 V for signalling circuit certifications CSA 690 V for signalling circuit conforming to IEC V for power circuit certifications UL 600 V for power circuit certifications CSA 690 V for power circuit conforming to IEC Mcycles 65 A AC-3 at Ue <= 440 V 1.4 Mcycles 80 A AC-1 at Ue <= 440 V 6.3 W AC W AC-1 With Plate Rail Standards EN EN IEC IEC UL 508 CSA C22.2 No 14 Product certifications CCC CSA GOST UL Connections - terminals Control circuit: screw clamp terminals 2 cable(s) in² (1...4 mm²) - cable stiffness: solid - without in² (1...4 mm²) - cable stiffness: solid - without Control circuit: screw clamp terminals 2 cable(s) in² ( mm²) - cable stiffness: flexible - with in² (1...4 mm²) - cable stiffness: flexible - with Control circuit: screw clamp terminals 2 cable(s) in² (1...4 mm²) - cable stiffness: flexible - without cable in² (1...4 mm²) - cable stiffness: flexible - without cable in² ( mm²) - cable stiffness: solid - without in² ( mm²) - cable stiffness: solid - without in² ( mm²) - cable stiffness: flexible - with cable in² ( mm²) - cable stiffness: flexible - with cable in² ( mm²) - cable stiffness: flexible - without in² ( mm²) - cable stiffness: flexible - without Tightening torque Operating time Safety reliability level Control circuit: lbf.in (1.7 N.m) - on screw clamp terminals - with screwdriver Philips No 2 Control circuit: lbf.in (1.7 N.m) - on screw clamp terminals - with screwdriver flat Ø 6 mm Power circuit: 70.8 lbf.in (8 N.m) - on EverLink BTR screw connectors - cable in² ( mm²) hexagonal 0.16 in (4 mm) Power circuit: lbf.in (5 N.m) - on EverLink BTR screw connectors - cable <= 0.04 in² (25 mm²) hexagonal 0.16 in (4 mm) ms closing ms opening B10d = cycles contactor with mechanical load conforming to EN/ISO B10d = cycles contactor with nominal load conforming to EN/ISO

4 Mechanical durability Operating rate 6 Mcycles 3600 cyc/h at <= 140 F (60 C) Complementary Coil technology Control circuit voltage limits Inrush power in VA Hold-in power consumption in VA Heat dissipation Without built-in suppressor module Uc at 140 F (60 C) operational 60 Hz Uc at 140 F (60 C) operational 50 Hz Uc at 140 F (60 C) drop-out 50/60 Hz 160 VA at 20 C (cos ϕ 0.75) 50 Hz 140 VA at 20 C (cos ϕ 0.75) 60 Hz 15 VA at 20 C (cos ϕ 0.3) 50 Hz 13 VA at 20 C (cos ϕ 0.3) 60 Hz W at 50/60 Hz Auxiliary contacts type Type mirror contact (1 NC) conforming to IEC Type mechanically linked (1 NO + 1 NC) conforming to IEC Signalling circuit frequency Minimum switching current Minimum switching voltage Non-overlap time Insulation resistance Hz 5 ma for signalling circuit 17 V for signalling circuit 1.5 ms on energisation (between NC and NO contact) 1.5 ms on de-energisation (between NC and NO contact) > 10 MOhm for signalling circuit Environment IP degree of protection IP2x front face conforming to IEC Protective treatment TH conforming to IEC Pollution degree 3 Ambient air temperature for operation Ambient air temperature for storage Permissible ambient air temperature around the device Operating altitude F ( C) F ( C) F ( C) at Uc ft (3000 m) without derating in temperature Fire resistance 1562 F (850 C) conforming to IEC Flame retardance V1 conforming to UL 94 Mechanical robustness Height Width Depth Product weight Shocks contactor closed 15 Gn for 11 ms Shocks contactor open 10 Gn for 11 ms Vibrations contactor closed 4 Gn, Hz Vibrations contactor open 2 Gn, Hz 4.8 in (122 mm) 2.17 in (55 mm) 4.72 in (120 mm) 1.9 lb(us) (0.86 kg) Ordering and shipping details Category CTR,D-LINE,OPEN,NONREV-NEW Discount Schedule I12 GTIN Nbr. of units in pkg. 1 Package weight(lbs) 2.08 Returnability Y Country of origin ID 4

5 Offer Sustainability Sustainable offer status Green Premium product RoHS Compliant - since Schneider Electric declaration of conformity REACh Reference not containing SVHC above the threshold Product environmental profile Available Download Product Environmental Product of life instructions Need no specific recycling operations 5