RT series Miniature Printed Circuit Board Relays, Sockets and Accessories
|
|
|
- Martha Allison
- 4 years ago
- Views:
Transcription
1 s RT series Miniature Printed Circuit oard Relays, Sockets and ccessories
2 pplied Coil Voltage (% of rated nom.) RT series (DC Coil) 6 mp PC oard Miniature Relay Meets VDE 0mm Spacing, KV Dielectric File E7 File LR734 NR 606 Features SPST through DPDT contact arrangements. Immersion cleanable and flux tight versions available. VDE 0mm spacing, kv dielectric, coil to contacts. UL Class F coil insulation system. Conforms to UL 08, 873, 33 and 90. Low profile;.7mm height. Sensitive coil; 400mW. Withstand surge voltage of 0,000V. Contact Data rrangements: Form (SPST-NO) Wiring Diagram Code, 3. Form (DPST-NO) Wiring Diagram Code. Form C (SPDT) Wiring Diagram Code, 3. Form C (DPDT) Wiring Diagram Code. Material: Silver-nickel 90/0. Minimum Load: V/00m. Expected Mechanical Life: 0 million operations. Initial Contact Resistance: 00 milliohms VDC. Designed to meet UL/CS/VDE ratings with relay properly vented. Remove vent nib after soldering and cleaning. UL/CS/VDE C 77VC Resistive/GP 00K 30VDC Resistive 00K 0VC Resistive/GP 30K 30VDC Resistive 30K 3/4 480VC* Motor 6K / 40VC* Motor 6K /3 0VC* Motor 6K 48 LR/0 40VC* Motor 30K 0VC* Tungsten K 300, 40VC* Pilot Duty 30K 3 0VC Resistive/GP 0K 77VC Resistive/GP 30K 4VDC Resistive 30K 30VDC Resistive 30K 480VC* Motor 6K 40VC* Motor 6K / 0VC* Motor 6K 60 LR/0 0VC* Motor 30K 0VC* Tungsten K 300, 40VC* Pilot Duty 30K 300, 40VC** Pilot Duty 30K 77VC Resistive/GP 00K 30VDC Resistive 00K 0VC Resistive/GP 30K 30VDC Resistive 30K / 40VC* Motor 6K /4 0VC* Motor 6K 34.8 LR/6 0VC* Motor 30K 7.4 LR/ 40VC* Motor 30K 300, 40VC* Pilot Duty 30K Tungsten K * Form only ** Form only Coil C Voltage: to 48VDC. Nominal C: 400mW. Duty Cycle: Continuous. Initial Insulation Resistance: 0,000 megohms, min., at C, 00VDC and 0% rel. humidity. Coil C DC Must Nominal Nominal Resistance Operate Coil Voltage in Ohms Voltage Current VC ±0% VC (m) 0/60Hz , , Max. mbient Temp. vs. Coil Voltage Operate C Must Operate Voltage(DC): 70% of nominal. Must Release Voltage(DC): 0% of nominal. Operate Time (Excluding ounce): 7 ms, typ., ms max. at nom. voltage. Release Time (Excluding ounce): 3 ms, typ., 6ms max. at nom. voltage. Environmental Data Max. llowable mbient Temp. ( C) : Coil temperature = mbient temperature. : 0% of nominal coil voltage at rated contact load Temperature Range: Storage: -40 C to +0 C. Operating: -40 C to +8 C at rated current. Vibration, Operational N.O.:0.06 (.6mm) max. excursions from 0 - Hz: N.C.:0.03 (0.8mm) max. excursions from 0 - Hz: with no contact opening >0µs Initial Dielectric Strength etween Open Contacts: >,000VC ( minute). etween Poles (code ): >,00VC ( minute). etween Coil and Contacts: >,000VC ( minute). Surge Voltage (DC): >0,000VC x (. x 0 µsec). Mechanical Data Termination: Printed circuit terminals. Enclosures: RT, 3, 4: Flux-tight, top vented, plastic case. RT, D, E: Immersion cleanable, plastic case. Weight: 0.3 oz. (0g) approximately.
3 Ordering Information Typical Part Number RT asic Series: RT = Miniature, printed circuit board relay.. Enclosure: = pole, Pinning 3.mm, flux-tight (Code ). = pole, Pinning 3.mm, sealed (Code ). 3 = pole 6, Pinning mm, flux-tight (Code 3). D = pole 6, Pinning mm, sealed (Code 3). 4 = pole 8, Pinning mm, flux-tight (Code ). E = pole 8, Pinning mm, sealed (Code ). 3. Contact rrangement: = Form C (SPST) (Requires wiring diagram codes or 3.) = Form C (DPST) (Requires wiring diagram code.) 3 = Form (SPST-NO) (Requires wiring diagram codes or 3.) 4 = Form (DPST-NO) (Requires wiring diagram code.) 4. Contact Material: 4 = Silver-nickel 90/0 (standard stock). = Silver cadmium Oxide (Special order). Coil Voltage: 00 = VDC 009 = 9VDC 08 = 8VDC 048 = 48VDC 006 = 6VDC 0 = VDC 04 = 4VDC Stock Items RT40 RT404 RT340 RT3404 RT400 RT40 RT404 RT340 RT3404 RT340 RT3404 RT3340 RTD400 RTD40 RTD404 RTD340 RTD3404 RT440 RT4404 RT4440 RT44404 RTE400 RTE40 RTE404 RTE440 RTE4404 Outline Dimensions reaking Capacity.6 (.7).7 (4.3).4 (9).0 (.7) 6X.03 X.00 (.80 X.) X.00 X.00 (. X.) Pole Pole PC oard Layouts (ottom View) Pole 3.mm.0 DI..76 (7.0).0 DI..300 (7.6).800 (0.3) Pole 6 Pole 8 mm.0 DI..400 (6).0 DI..300 (7.6).800 (0.3) : 6 Version. : Version. : Contact. : Contacts in series. Contact Life for Resistive C Load (Typical) Operations : 8 Model : Model C: 6 Model C Code Code 3 & Note: On single throw models, only necessary terminals are present. Wiring Diagrams (ottom View) Pole Pole 6 Pole reaking Capacity (kv) Note: Data from 70 C. Code Code 3 Code Note: On single throw models, only necessary terminals are present.
4 pplied Coil Voltage (% of rated nom.) RT series (C Coil) 6 mp Miniature Printed Circuit oard Relay Meets VDE 0mm Spacing, KV Dielectric File E3889 File LR438 NR 606 Features SPST through DPDT contact arrangements. Immersion cleanable and flux tight versions available. Meets VDE 0mm spacing, kv dielectric, coil to contacts. Conforms to UL 08, 873 and 33. Contact Data rrangements: Form (SPST-NO) Wiring Diagram Code, 3. Form (DPST-NO) Wiring Diagram Code. Form C (SPDT) Wiring Diagram Code, 3. Form C (DPDT) Wiring Diagram Code. Material: Silver-nickel 90/0. Minimum Load: V/00m. Expected Mechanical Life: 0 million operations. Designed to meet UL/CS/VDE ratings with relay properly vented. Remove vent nib after soldering and cleaning. UL/CS C: 40VC GP 30K 40VC Resistive/GP 00K 8VDC Resistive 30K 40VC* Motor 6K / 0VC* Motor 6K 8VDC* Resistive 30K 300 Pilot Duty 6K 3 40VC GP 6K 8VDC Resistive 30K / 0VC* Motor 6K 40VC* Motor 6K 48 LR, 8 40VC Motor 30K 300 Pilot Duty 6K 40VC Resistive 30K 8VDC Resistive/GP 30K / 40VC Motor 6K /4 0VC Motor 6K 300 Pilot Duty 6K * Form only VDE 0VC Resistive 0VC Resistive 00K 3 0VC Resistive 0K 0VC Resistive 0K 0VC Resistive 30K 0VC Resistive 0K Coil 0 C Voltage: 4,, 30VC. Nominal C:.7V. Duty Cycle: Continuous. Initial Insulation Resistance: 0,000 megohms, min., at 0 C, 00VDC and 0% rel. humidity.. Coil Data DC Must Nominal Nominal Nominal Resistance Operate Drop-out Coil Coil Voltage in Ohms Voltage Voltage Current Current VC ±0% VC VC (m) 0Hz. (m) 60Hz , , Max. mbient Temp. vs. Coil Voltage Operate Data Max. llowable mbient Temp. ( C) : Coil temperature = mbient temperature. : 0% of nominal coil voltage at rated contact load. Must Operate Voltage: See coil data. Operate Time (Excluding ounce): 8 ms, typ., at nom. voltage. Release Time (Excluding ounce): ms, typ., at nom. voltage. Environmental Data Temperature Range: Storage: -40 C to +0 C. Operating: -40 C to +70 C at rated current. Vibration: 30-0 Hz: at 0g with no contact opening >0µs on the N.O. contact; at g with no contact opening >0µs on the N.C. contact. Initial Dielectric Strength etween Open Contacts: >,000VC ( minute). etween Poles (code ): >,00VC ( minute). etween Coil and Contacts: >,000VC ( minute). Creepage/Clearance, Coil to Contact: 0/0mm. Mechanical Data Termination: Printed circuit terminals. Enclosures: RT, 3, 4: Flux-tight, top vented, plastic case. RT, D, E: Immersion cleanable, plastic case. Weight: 0.4 oz. (g) approximately.
5 Ordering Information Typical Part Number RT D 4 4. asic Series: RT = Miniature, printed circuit board relay.. Enclosure: = pole, Pinning 3.mm, flux-tight (Code ). = pole, Pinning 3.mm, sealed (Code ). 3 = pole 6, Pinning mm, flux-tight (Code 3). D = pole 6, Pinning mm, sealed (Code 3). 4 = pole 8, Pinning mm, flux-tight (Code ). E = pole 8, Pinning mm, sealed (Code ). 3. Contact rrangement: = Form C (SPST) (Requires wiring diagram codes or 3.) = Form C (DPST) (Requires wiring diagram code.) 3 = Form (SPST-NO) (Requires wiring diagram codes or 3.) 4 = Form (DPST-NO) (Requires wiring diagram code.) 4. Contact Material: 4 = Silver-nickel 90/0.. Coil Voltage: 4 = 4VC 730 = 30VC 6 = VC Stock Items RT44 RT46 RT4730 RTD44 RTD46 RTD4730 RTE44 RTE46 RTE4730 Outline Dimensions reaking Capacity.6 (.7).0 (.7) Pole Pole.7 (4.3).4 (9) 6X.03 X.00 (.80 X.) X.00 X.00 (. X.) PC oard Layouts (ottom View) Pole 3.mm.0 DI..76 (7.0).0 DI..96 (7.0).788 (0.0).0 DI. Wiring Diagrams (ottom View) Pole 6 Pole 8 mm.0 DI..394 (0.0).96 (7.0) Code Code 3 & Note: On single throw models, only necessary terminals are present..788 (0.0) : 6 Version. : Version. Contact Life for Resistive C Load (Typical) Operations reaking Capacity (kv) Note: Data from 70 C. : 8 Model : Model C: 6 Model C : Contact. : Contacts in series. Pole Pole 6 Pole 8 Code Code 3 Code Note: On single throw models, only necessary terminals are present.
6 RT series (Latching) 6 mp Miniature Printed Circuit oard Relay Meets VDE 0mm Spacing, KV Dielectric File E3889 File LR438 NR 606 Features Latching relay with or coils. SPDT (6) and DPDT (8) contact arrangements. Flux tight enclosure. Meets VDE 0mm spacing, kv dielectric, coil to contacts. Conforms to UL 08, 873 and 33. Contact Data rrangements: Form C (SPDT) Wiring Diagram Code 3. Form C (DPDT) Wiring Diagram Code. Material: Silver-nickel 90/0. Minimum Load: V/00m. Expected Mechanical Life: million operations, pole. million operations, pole. Coil 0 C Voltage: to 4VDC*, coil. 3 to 4VDC*, coil. Nominal C: 400mW, coil. 600mW, coil. Duty Cycle: Continuous. Initial Insulation Resistance: 0,000 megohms, min., at 0 C, 00VDC and 0% rel. humidity. * Other coil voltages upon request. Coil Data DC Nominal Nominal Resistance Set Reset Coil Voltage in Ohms Voltage Voltage Current VDC ±0% VDC VDC (m) , Designed to meet UL/CS/VDE ratings with relay properly vented. Remove vent nib after soldering and cleaning. UL/CS 70 C: 3 40VC GP 6K 8VDC Resistive 30K / 0VC* Motor 6K 40VC* Motor 6K 48 LR, 8 40VC Motor 30K 300 Pilot Duty 6K 40VC Resistive 30K 8VDC Resistive/GP 30K / 40VC Motor 6K /4 0VC Motor 6K 300 Pilot Duty 6K * Form only VDE 70 C: 3 0VC Resistive 0K 0VC Resistive 30K 0VC Resistive 30K 0VC Resistive 00K Coil Data DC Nominal Nominal Resistance Set Reset Coil Voltage in Ohms Voltage Voltage Current VDC ±0% VDC VDC (m) Operate 0 C Must Operate Voltage: See coil data. Operate Time (Excluding ounce): ms, typ., at nom. voltage. Release Time (Excluding ounce): 4 ms, typ., at nom. voltage. Max. Switching Rate: 360 ops. at rated load. Environmental Data Temperature Range: Storage: -40 C to +0 C. Operating: -40 C to +70 C at rated current. Vibration: Hz: N/C opens at >3g and changes from reset to set at >g; Shock: N/C opens at >6g and changes from reset to set at >g.; Initial Dielectric Strength etween Open Contacts: >,000VC ( minute). etween Poles (code ): >,00VC ( minute). etween Coil and Contacts: >,000VC ( minute). Creepage/Clearance, Coil to Contact: 0/0mm. Mechanical Data Termination: Printed circuit terminals. Enclosures: RT 3, 4: Flux-tight, top vented, plastic case. Weight: 0.46 oz. (3g) approximately.
7 Ordering Information. asic Series: RT = Miniature, printed circuit board relay.. Enclosure: 3 = pole 6, Pinning mm, flux-tight (Code 3). 4 = pole 8, Pinning mm, flux-tight (Code ). 3. Contact rrangement: = Form C (SPDT) (Requires wiring diagram code 3.) = Form C (DPDT) (Requires wiring diagram code.) 4. Contact Material: 4 = Silver-nickel 90/0.. Coil Voltage: Coil Coil Voltage 0 F0 = VDC 06 F06 = 6VDC F = VDC 4 F4 = 4VDC Typical Part Number RT Stock Items Consult factory for availability. Outline Dimensions Wiring Diagrams (ottom View).6 (.7).0 (.7) Pole 6 Pole 8 6X.03 X.00 (.80 X.) (9) (4.3) * X.00 X.00 (. X.) * Coil version only 3* * Coil Version Only Code 3 Code 3* PC oard Layout (ottom View) Pole 6 Pole 8 mm reaking Capacity Pole Pole.394 (0.0).0 DI..788 (0.0) DI. *.96 (7.).48* (3.76 * Coil Version Only : 6 Version. : Version. : Contact. : Contacts in series. Code 3 &
8 RT series Sockets and ccessories File E349 File LR438 NR 38 RT786 with RPMU0730 RP7860 RT606 Sockets for RT Series Relays RT7864 0, 300VC mm Pinning RT786, Pole 0, 0VC Pole x 0, 0VC mm Pinning RT7866, Pole, 300VC Pole x, 300VC mm Pinning (7.).97 (7.).97 (7.) Relay Ejector.60 (.).77 (4.).874 (.).693 (43) Hold-Down Spring RT (.).77 (4.).874 (.).693 (43) Hold-Down Spring RT (.).77 (4.).874 (.).83 (8) Ejector/Hold-Down Spring RT606 3 Module RP7860 0, 0VC 3.mm Pinning PC oard Layout (ottom View) RP7860 Pole 0, 0VC Pole x 0, 0VC mm Pinning PC oard Layout (ottom View).38 (3.).0 (.08). (3.0). (3.0). (.7).89 (4.8).89 (4.8).34 (9.0).4 (0.8).60 (.4).30 (7.6).80 (0.3) Ø.06 DI. (.). (.7).89 (4.8).89 (4.8).34 (9.0).4 (0.8).0 (.08).30 (7.6).60 (.4) Ø.06 DI. (.) Hold-Down Spring RP604 Hold-Down Spring RP604 Socket and ccessory Selection Table Stock items are boldfaced. Socket Socket Termination Hold-Down Spring RT7864, DIN Screw Terminal RT606 RT786, DIN Screw Terminal RT606 RT7866 DIN Screw Terminal RT606 RP7860 PC RP604 RP7860 PC RP604 RPMU0730 RC Network 0..30VC * Note. Not suitable for bistable relay with two coils.. For a 6 pole relay the following jumpers have to be connected; to, to and 4 to Insertion of the relay. First the ejector (and eventually the module) has to be mounted onto the socket. Then the relay has to be set in the correct position and pressed into the socket until the ejector snaps over the top of the relay. Siemens Electromechanical Components, Inc. 700 Westpark Drive Peachtree City, G Specifications and availability subject to change without notice. 3C7800 Printed in U.S.. IH/-99
AZ420 MINIATURE GENERAL PURPOSE RELAY
MINIATURE GENERAL PURPOSE RELAY FEATURES Rugged construction for high reliability Life expectancy greater than 0 million operations DC coils to 11 V Power consumption as low as 2 mw per pole available
34 Series - Slim electromechanical PCB relays 6 A. Features SERIES 34.51
34 Series - Slim electromechanical PCB relays 6 34 SERIES Features 34.51 Ultra-slim 1 Pole - 6 relay Printed circuit mount - direct or via PCB socket 35 mm rail mount - via screw, screwless or push-in
38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 - 16 A
38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 - 16 A 38 SERIES Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit EMR Electromechanical
40 Series - Miniature PCB/Plug-in relays 8-10 - 16 A. Features 40.31 40.51 40.52
Features 40.31 40.51 40.52 1 & 2 Pole relay range 40.31-1 Pole 10 A (3.5 mm pin pitch) 40.51-1 Pole 10 A (5 mm pin pitch) 40.52-2 Pole 8 A (5 mm pin pitch) PCB mount - direct or via PCB socket 35 mm rail
SPST-NO SPDT DPST-NO DPDT
PCB Relay Next-generation PCB Relay Available in 2 Models Low profile:. mm max. in height Contains no lead inside and features cadmium-free contacts ensuring environment-friendly use. Conforms to VDE0
PCB Relay. LED indicator G2R-1A3-SN G2R-13-SN --- --- contact) LED indicator and diode DC G2R-1A3-SND G2R-13-SND --- ---
PCB Relay A Power Relay for a Variety of Purposes with Various Models Conforms to VDE045 (VDE approval: C2 insulation grade), UL8, CSA22.2, SEV, SEMKO. Meets VDE0700 requirements for household products
38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 A
38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 A Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit EMR Electromechanical Relays
38 SERIES. Relay interface modules 0.1-2 - 3-5 - 6-8 - 16 A. EMR Electromechanical Relays. Common features. SSR Solid State Relays. 6.
38 Relay interface modules 0.1-2 - 3-5 - 6-8 - 16 A 38 Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit 6.2 mm wide EMR - DC, AC or AC/DC
1 POLE 5 A (CADMIUM FREE CONTACTS TYPE) NY SERIES
POWER RELAY 1 POLE 5 A (CADMIUM FREE CONTACTS TYPE) NY SERIES RoHS compliant FEATURES Ultra slim type with 5 mm thickness Good for high density mounting Low power consumption and high sensitivity Nominal
2 POLES - 5A LOW PROFILE TYPE
FTR-K1 SERIES POWER RELAY 2 POLES - 5A LOW PROFILE TYPE FTR-F1 Series FEATURES Low profile (height: 16.5mm) DPST/DPDT 5A, TV-3 rating available High insulation (due to its reinforced insulation construction)
48.12. 2 pole, 8 A Safety relay. Screw terminal. 35 mm rail (EN 60715) mounting. 2 CO (DPDT) 8/15 250/400 2,000 500 0.37 8/0.65/0.
48 Series - Relay interface modules 8 A Features 48.12 2 Pole Safety relay interface modules, 15.8 mm wide 48.12-2 Pole 8 A (screw terminal) DC sensitive coils Relay with forcibly guided contacts according
0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N
55 Series - General purpose relays 7-10 A Features 55.12 55.13 55.14 Printed circuit mount, general purpose 2, 3 & 4 Pole relays 55.12-2 Pole 10 A 55.13-3 Pole 10 A 55.14-4 Pole 7 A AC coils & DC coils
48 SERIES Relay interface modules 10 A
48 Relay interface modules 10 A 1 CO relay interface modules, mm wide Ideal interface for PLC and electronic systems Type 48.P3 1 CO 10 A s Type 48.31 1 CO 10 A s AC coils or DC sensitive coils Supply
1 POLE - 16A 80A Inrush type. (b) Contact configuration A : 1 form A (SPST-NO) C : 1 form C (SPDT) (standard type "K" only)
FTR-K1 SERIES POWER RELAY 1 POLE - 16A 80A Inrush type FTR-K1 Series FEATURES Peak 80A inrush current (1 form A type) Low profile (height: 15.7mm) HIGH INSULATION Insulation distance (between coil and
Type Contact material Contact form Construction Model General purpose AgCdO SPDT Semi-sealed G2R-1
Power PCB Relay G2R Creepage distance of 8.0 mm (0.31) min. between coil and contact. Dual-winding latching type available. Plug-in and quick-connect terminals available. High sensitivity (360 mw) and
DISCONTINUED (2012) VB SERIES 2 POLE 5 A (MEDIUM LOAD CONTROL) POWER RELAY. RoHS compliant
POWER RELAY 2 POLE 5 A (MEDIUM LOAD CONTROL) VB SERIES RoHS compliant FEATURES UL, CSA, VDE, SEV, SEMKO, CQC recognized TV-3 rated Working class: C UL class B (130 C) insulation Type of service: continuous
FP2 Relay. The Best Relaytion
The Best Relaytion 2 pole telecom / signal relay Through Hole Type (THT) Polarized. Relay types: non-latching with1 coil latching with 1 coil latching with 2 coils Features Telecom / signal relay (dry
SPST-NO SPDT DPST-NO DPDT
PCB Relay A Power Relay for a Variety of Purposes with Various Models Conforms to VDE (EN680-), UL08, CSA22.2. Meets EN6033- requirements for household products. Clearance and creepage distance: 8 mm/8
(e) Enclosure B : Flux proof type, RTII C : Plastic sealed type (with tape), RTIII K : Plastic sealed type, RTIII
Non-promotional not for new designs FTR-K1 SERIES POWER RELAY 1 POLE - 10A VS Series FEATURES UL, CSA, VDE, SEV, SEMKO, CQC recognized TV-5 is available Working class: C UL class B (130 C) coil wire insulation
SILENT POWER RELAY. FTR-H3 Series. 1 POLE - 78A/120A Inrush Current Type FTR-K1 SERIES FEATURES
FTR-K1 SERIES SILENT POWER RELAY 1 POLE - 78A/120A Inrush Current Type FTR-H3 Series FEATURES Pin compatible with widely used VS and FTR-H1 series power relays Silent relay with patented unique U-shape
General Purpose Relays Types K, R, N, and C
General Purpose Relays s K, R, N, and C Catalog 0CT00R/0 00 Class 0 CONTENTS Description............................................. Page R Miniature Plug-in Relays.............................. K Plug-in
DISCONTINUED (1998) FBR46 SERIES. MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) RoHS compliant FEATURES
MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) FBR46 SERIES RoHS compliant FEATURES Miniature size About 50% smaller in volume compared with the FBR240 series used mainly in communication equipment.
1 POLE - 16A 80A Inrush type. (a) Relay type FTR-K1 : FTR-K1-Series
FTR-K1 SERIES POWER RELAY 1 POLE - 16A 80A Inrush type FTR-K1 Series FEATURES Peak 80A inrush current (1 form A type) Low profile (height: 15.7mm) High insulation Insulation distance (between coil and
2 POLES 1 to 2 A (FOR SIGNAL SWITCHING)
MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) RY SERIES FEATURES Ultra high sensitivity UL, CSA recognized Conforms to FCC rules and regulations Part 68 Surge strength 1,500 V High dielectric
Number of poles 1-pole 2-pole Minimum Enclosure Contact. G2R-1AZ G2R-1Z DC Fully sealed G2R-1AZ4 G2R-1Z4 G2R-1A-E G2R-1-E
PCB Power elay The Best Seller eneral purpose power elays of single-pole0 A and double-pole A. Safety-oriented design with dielectric strength of,000 V between coil and contacts, and surge resistance of
Solid-State Timer H3G
ASH & ALAIN INDIA PVT LTD S-100, F.I.E.E., Okhla Industrial Area, Phase-ii, New Delhi-11000(India) Tel : 011-43797575 Fax : 011-43797574 E-mail : sales@ashalain.com Solid-State Timer Low-Cost, Plug-In
1 POLE - 8A Medium Load Control
POWER RELAY 1 POLE - 8A Medium Load Control JS Series FEATURES UL class B (130 C) coil wire insulation 1 form A (SPST-NO) or 1 form C (SPDT) contact Low profile and space saving - Height: 12.5 mm - Mounting
49 Series - Relay interface modules 8-10 - 16 A. Features
Features 1 & 2 Pole relay interface modules 5 µm Gold plate contacts for low level switching capability 49.31-50x0-1 Pole 10 A (screw terminal) 49.52-50x0-2 Pole 8 A (screw terminal) 49.72-50x0-2 Pole
Goodsky Technical Data. Contact Details
Goodsky Technical Data The following page(s) are extracted from multi-page Goodsky product catalogues or CDROMs and any page number shown is relevant to the original document. The PDF sheets here may have
Signal Relays AXICOM. P2 Relay V23079. AXICOM Telecom-, Signal and RF Relays. P2 V23079 Relay. Coil Operating Range. Coil Data
P Relay V379 n Standard telecom relay (ringing and test access) n Slim line 5x7.5mm (.59x.95 ) n Max. switching current 5A n form C bifurcated contacts ( changeover contacts, CO) n Immersion cleanable
RY2 miniature industrial relays
6 RY2 Relays of general application For plug-in sockets, 35 mm rail mount acc. to PN-EN 60715 or on panel mounting Flat insert connectors - faston x 0,5 mm Recognitions, certifications, directives: RoHS,
1 POLE - 16A / Inrush 120A relay. (a) Relay type FTR-K1 : FTR-K1 Series (b) Contact configuration A : 1 form A C : 1 form C
FTR-K1 SERIES POWER RELAY 1 POLE - 16A / Inrush 120A relay FTR-K1-KS Series FEATURES 1 pole 16A, 1 form A or 1 form C Peak inrush current 120A / TV-8 Coil power 400mW High insulation in small package (between
POWER RELAY. JV Series. 1 POLE - 5A/10A Medium Load Control FTR-K1 SERIES FEATURES
FTR-K1 SERIES POWER RELAY 1 POLE - 5A/10A Medium Load Control JV Series FEATURES UL, CSA, VDE, SEMKO, CQC recognized UL class B (130 C) wire class Low profile and space saving - Height: 12.5 mm - Mounting
60 Series - General purpose relays 6-10 A. Features 60.12 60.13
Features 60.12 60.13 Plug-in mount 10 A General purpose relay 2 & 3 pole changeover contacts Cadmium Free contacts (preferred version) AC coils & DC coils UL Listing (certain relay/socket combinations)
Relays High Capacity 50 Amp Mini Relays Standard Mini Relays Micro Relays Power Relays Connector Modules
CHIEF EN TERPRISES INC. M a s t e r I n t e r n a t i o n a l D i s t r i b u t o r Relays High Capacity 50 Amp Mini Relays Standard Mini Relays Micro Relays Power Relays Connector Modules M AS TER IN
NA Series. 2 POLES - 1 to 2 A (For Signal Switching) MINIATURE RELAY FTR-K1 SERIES
FTR-K1 SERIES MINIATURE RELAY 2 POLES - 1 to 2 A (For Signal Switching) NA Series FEATURES Slim type relay for high density mounting Conforms to Telcordia specification and FCC Part 68 - Dielectric strength
1 POLE - 5A SLIM POWER RELAY
POWER RELAY POLE - A SLIM POWER RELAY FTR-MY Series RoHS compliant FEATURES Width mm, height mm,(% smaller than NY series) area mm, super slim, low power, compact and light weight.gr. Nominal power: mw
A SERIES. 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) MINIATURE RELAY. RoHS compliant
MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) A SERIES RoHS compliant FEATURES Extremely low profile and light weight Height: 5 mm Weight: approximately 1.2 g Meet FCC (Part 68) standard Conforms
The Best Relaytion. Reed Relays. 108-98011 Rev. B EC-JM00-0009-03 ECOC: JM10 1. Aug. 04
The Best Relaytion Reed Relays 108-98011 Rev. B EC-JM00-0009-03 ECOC: JM10 1. Aug. 04 1 and 2 pole relays non-polarized, non-latching Features Direct coil control with TTL-signals possible Highly reliable
1 pole, 16 A Screw terminal connection 35 mm rail (EN 60715) mounting. 2 pole, 8 A Screw terminal connection 35 mm rail (EN 60715) mounting
Series - Relay interface modules 8-10 - 16 A Features.01.02 1 & 2 pole relay interface modules, screw terminal socket, mm wide. Ideal interface for PL and electronic systems.01-1 Pole 16 A.02-2 Pole 8
POWER RELAY. FTR-K1-KS Series. 1 POLE - 16A / Inrush 120A relay FTR-K1 SERIES FEATURES
POWER RELAY POLE - 6A / Inrush 20A relay FTR-K-KS Series FTR-K SERIES FEATURES pole 6A, form A or form C Peak inrush current 20A / TV-8 Coil power 400mW High insulation in small package (between coil and
General-purpose Relay
General-purpose Relay An Improved Miniature Power Relay with Many Models for Sequence Control and Power Applications A wide range of relay variations including ones with operation indicators, high-capacity
Model Number Structure
General-purpose Relay G2RS Slim and Space-saving Power Plug-in Relay Lockable test button models now available. Built-in mechanical operation indicator. Provided with nameplate. AC type is equipped with
MasterINTERFACE 39 Series - Relay interface modules
MasterINTERFACE 39 Series - Relay interface modules Common features Space saving 6.2 mm wide Connections for 16-way jumper link Integral coil indication and protection circuit Secure retention and easy
MasterINTERFACE 39 Series - Relay interface modules
MasterINTERFACE 39 Series - 39 Common features Space saving 6.2 mm wide Connections for 16-way jumper link Integral coil indication and protection circuit Secure retention and easy ejection by plastic
Model Number Structure
General-purpose Relay G2RS Slim and Space-saving Power Plug-in Relay Lockable test button models now available. Built-in mechanical operation indicator. Provided with nameplate. AC type is equipped with
Type Sealing Poles Contacts Rated voltage Model Standard d Flux-tight 4 poles oes 3PST-NO, SPST-NC 24 VDC G7SA-3A1B 3PST-NO, 3PST-NC
Safety Relay Slim Safety Relays Conforming to EN Standards The forcibly guided contact in the assures safe operation (EN50205 Class A, approved by VDE.) Ideal for use in safety circuits in press machinery,
- Electromechanical Printed Circuit Board
Section 8 Relays - Electromechanical Printed Circuit Board www.magnecraft.com 847-44-2540 Electromechanical Printed Circuit Board Relays pplication Data Introduction: In the past several years the dry
Electronic timer CT-VBS.17+18 OFF-delayed without auxiliary voltage, for DC contactors Data sheet
Characteristics Single-function OFF-delay timer for DC contactors, without auxiliary voltage Width.5 mm CDC 5 6 F3 Approvals A culus E CCC CT-VBS a Circuit diagram b Marker label Marks a CE b C-Tick Order
D7 Series Standard and Full Featured. Standard DPDT 24V AC 120V AC 240V AC 12V DC 24V DC 120V AC 110V DC 240V AC 6V AC 6V DC 12V AC 12V DC 24V AC
April 00 D Series Standard and Full Featured - Catalogue Number Structure Table -. D Series Catalogue Numbering System Family Type DPR = Standard Relay DPF = Full Featured Relay Contact Configuration =
DISCONTINUED (2009) RA SERIES. 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) MINIATURE RELAY. RoHS compliant
MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) RA SERIES RoHS compliant FEATURES Ultra high sensitivity (75 to 150 mw) High reliability-bifurcated contacts Conforms to FCC rules and regulations
Pluggable interface relays CR-P Pcb relays
2CDC 293 034 F0004 1 2 4 3 Features 9 different supply s: DC versions: 12 V, 24 V, 48 V, 110 V AC versions: 24 V, 48 V, 110 V, 120 V, 230 V Output contacts: 1 c/o (16 A) or 2 c/o (8 A) Cadmium-free contact
DISCONTINUED (1998) MINIATURE RELAY 1 POLE 1 to 2 A (FOR SIGNAL SWITCHING) FBR211 SERIES. RoHS compliant
MINIATURE RELAY POLE to 2 A (FOR SIGNAL SWITCHING) FBR2 SERIES RoHS compliant FEATURES 2 A maximum carrying current Capable of 2 A maximum continuous carrying current in the contact Superior reliability
General Purpose Relays Accessories. Accessories Miniature Relay PT
Miniature Relay PT n Easy replacement of relays on a densely packed DIN rail n No reduction of protection class or creepage/clearance with plastic retainer n Plug-in indicator- and protection modules n
D2SW-P. Sealed Subminiature Basic Switch. Ordering Information
Sealed Subminiature Basic Switch Sealed Basic Switch with Simplified Construction, Mounting Compatible with SS and D2SW Series. Sealing by using rubber packing means the switch can be used in dust-proof
4 A CAPACITY, THE VARIETY OF CONTACT ARRANGEMENTS FEATURES
4 A CAPACITY, THE VARIETY OF CONTACT ARRANEMENTS S RELAYS FEATURES 28. 1.12 12..472 1.4.49 The variety of contact arrangements 2 Form A 2 Form B, 3 Form A 1 Form B, 4 Form A Latching types available High
Relays & Sockets. RH Series Compact Power Relays. Part Number Selection
RH Key features SPDT through PDT, 0A contacts Compact power type relays Miniature power relays with a large capacity 0A contact capacity Compact size saves space Contact SPDT DPDT PDT PDT RH Series Compact
Relays and Timers Specifications Bulletin Number 700
Technical Data Relays and Timers Specifications Bulletin Number 700 Topic Page General Purpose Relays 2 Timing Relays 41 NEMA Industrial Relays 81 IEC Control Relays 93 Solid State Relays 109 Additional
HIGH REPEATABILITY, BROADBAND TO-5 RELAYS DPDT
HIGH REPEATABILITY, BROADBAND TO-5 RELAYS DPDT SERIES RF00 RF00D RF00DD RF0 RF0D RF0DD RELAY TYPE Repeatable, RF relay Repeatable, RF relay with internal diode for coil transient suppression Repeatable,
SZR-LY Series. General Purpose Power Relay WARNING WARNING. Sensing and Control
Power Relay FEATURES Small package design ARC barrier equipped Silver Cadium Oxide contact High dielectric strength (,800 Vac) High reliability and long life Ultra-high sensitivity with quick response
LAUBE TECHNOLOGY DRY REED RELAYS
LAUBE TECHNOLOGY DRY REED RELAYS CONTACT FORM CURRENT PART SERIES PAGE #'S (1A) SPST-NO 1 AMP D41A...0L 147~148 (Link) (1A) SPST-NO 1 AMP D71A.1.0 149~150 (Link) (1A) SPST-NO 1 AMP F51A.100 151~152 (Link)
TQ SMD RELAYS TQ SMD LOW-PROFILE SURFACE-MOUNT RELAY FEATURES SPECIFICATIONS
LOW-PROFILE SURFACE-MOUNT RELAY RELAYS.55 5.6. FEATURES Low-profile: 6 mm.36 inch (Tape height: max. 6.5 mm.56 inch) Tape and reel package is available as standard packing style Surge withstand between
RM4TG20 three-phase network control relay RM4-T - range 200..500 V
Characteristics three-phase network control relay RM4-T - range 200..500 V Complementary [Us] rated supply voltage Output contacts Setting accuracy of time delay Delay at power up Measuring cycle Marking
80 Series - Modular timers 16 A. Features 80.01 80.11
80 Series - Modular timers 6 A 80. Multi-function and mono-function timer range - Multi-function & multi-voltage 80. - ON delay, multi-voltage 7.5 mm wide Six time scales from 0.s to 24h 35 mm rail (EN
ONE OF THE SMALLEST SNAP-ACTION SWITCHES IN THE WORLD. FEATURES Superminiature type, light-weight snap action switch PC board terminal type (0.
ONE OF THE SMALLEST SNAP-ACTION SWITCHES IN THE WORLD SWITCHES FEATURES Superminiature type, light-weight snap action switch PC board terminal type (0.2g) Solder terminal type with mounting holes (0.3g)
Reed V23100-V4 Relay. AXICOM Telecom-, Signal and RF Relays. AXICOM Telecom-, Signal and RF Relays. Reed V23100-V4 Relay
AXICOM AXICOM 108-98011 Nov. 07 Rev. C ECOC: JM10 Disclaimer While Tyco Electronics has made every reasonable effort to ensure the accuracy of the information in this datasheet, Tyco Electronics does not
80 Series - Modular timers 16 A. Features 80.01 80.11
80 Series - Modular timers 16 A Features 80.11 Multi-function and mono-function timer range - Multi-function & multi-voltage 80.11 - On-delay, multi-voltage 17.5 mm wide Six time scales from 0.1s to 24h
Relays. Relays. RH Series. RH Series General Purpose Midget Relays. Specifications
RH Series RH Series General Purpose Midget Key features of the RH series include: Compact midget size saves space High switching capacity (A) Choice of blade or PCB style terminals Relay options include
DATA SHEET COMPACT AND LIGHTWEIGHT, SMALL MOUNTING SIZE, HIGH BREAKDOWN VOLTAGE
DATA SHEET MINIATURE SIGNAL RELAY EC SERIES COMPACT AND LIGHTWEIGHT, SMALL MOUNTING SIZE, HIGH BREAKDOWN VOLTAGE DESCRIPTI The EC series has reduced mounting space but sustained high-performance of NEC
G7SA. Ordering Information. Slim Plug-In Safety Relay. Slim Safety Relay for Machine Control. H Slim body only 13 x 24 x 50 mm
Slim Plug-In Safety Relay Slim Safety Relay for Machine Control H Slim body only 13 x 24 x 50 mm (six poles) H Four-pole and six-pole models are available H Terminal arrangement simplifies PCB pattern
V REG.-Nr. 115719, Z E135149 Technical data 2-pole 4-pole Rated current 12 A 6 A SCHRACK. Accessories Miniature Relay PT. General Purpose Relays
Accessories Miniature Relay PT Easy replacement of relays on a densely packed DIN rail No reduction of protection class or creepage/clearance with plastic retainer Plug-in indicator- and protection modules
Features. Type List 832A
Type List Terminal style PCB terminal A Contact form 1B (SPNC) 1B (SPNC) Insulation eatures Heavy duty 30A general purpose Power Relays. UL/CUL (UL 508 & 873), VDE safety approvals. Optional for open frame,
SKR - industry relay
SKR - industry relay the universal relay SKR the time module STM the socket The strengths of the SKR industry relay lie in the mature and thoughtout construction. Over-average contact safety and life time,
Reyrolle Protection Devices. 7PG17 - XR Intertripping, Interposing, Supervision and Special Purpose Relays. Answers for energy
Reyrolle Protection Devices 7PG17 - XR Intertripping, Interposing, Supervision and Special Purpose Relays. Answers for energy Siemens Protection Devices Limited 2 7PG17 XR101 & XR102 Intertripping Relay
NEW! Typical Applications. Motor controls Thermostatics Portable tools Air Conditioner. Materials
TF2 Series Miniature Snapacting Switches NEW! Features/Benefits Broad range of operating forces Ratings up to 10 AMPS Wide variety of actuator styles Quick connect terminations Typical Applications Motor
Single-phase (220...240 V) voltage monitoring: Undervoltage Overvoltage Window mode (overvoltage + undervoltage) Voltage fault memory selectable
Features 70.11 70.31 70.41 Electronic voltage monitoring relays for single and three-phase applications Multifunctional types, providing the flexibility of monitoring Undervoltage, Overvoltage, Window
HIGH REPEATABILITY SPDT, BROADBAND 12 GHZ MAGNETIC-LATCHING RF RELAY
HIGH REPEATABILITY SPDT, BROADBAND 12 GHZ MAGNETIC-LATCHING RF RELAY SERIES RF121 RELAY TYPE RF Magnetic-Latching, SPDT, Through-hole Relay DESCRIPTION The ultraminiature RF121 relay is built on Teledyne
TF2 Series Miniature Snap-acting Switches
Miniature Snapacting Switches Features/Benefits Broad range of operating forces Ratings up to 10 AMPS Wide variety of actuator styles Quick connect terminations Typical Applications Motor controls Thermostatics
DATA SHEET COMPACT AND LIGHTWEIGHT, SMALL MOUNTING SIZE, HIGH BREAKDOWN VOLTAGE
DATA SHEET MINIATURE SIGNAL RELAY EC SERIES COMPACT AND LIGHTWEIGHT, SMALL MOUNTING SIZE, HIGH BREAKDOWN VOLTAGE DESCRIPTI The EC series has reduced mounting space but sustained high-performance of NEC
Surface Mounting Relay
Surface Mounting Relay Surface Mounting Relay with the World s Smallest Mounting Area and a Height of Only 5.2 mm Subminiature model as small as 5.2 (H) x 6.5 (W) x 10 (L) mm is ideal for high-density
O WA-120U series IP67. 120W Single Output Switching Power Supply. Features. Aplications
Features UniversalACinput/Fulrange Built-inactivePFCfunction Higheficiencyupto91% Protections:Shortcircuit/Overcurent/ Overvoltage/Overtemperature Fanlesdesign,colingbyfreairconvection Colingbyfreairconvection
Elesta Elektrotechnik AG industry relays and accessories
Elesta Elektrotechnik AG industry relays and accessories edition 003 table of contents SKR-industry relay 4 SKR-screw socket with accessories 4 SFR-industry relay 6 SFR-screw socket with accessories 7
Mini Motor Contactor J7KNA Main contactor Accessories Approved Standards Standard Guide No (US,C) Ordering Information tage Model Number Legend gear
Mini Motor Contactor J7KNA ) Main contactor AC & DC operated Integrated auxiliary contacts Screw fixing and snap fitting (35 mm DIN-rail) Range from 4 to 5.5 (AC 3, 380/415V) 4 -main pole version (4 AC
CQM1-SF200/CS1W-SF200
Safety Relay Unit ( I/O Unit Type) CQM1-SF200/CS1W-SF200 CSM_CQM1-SF200_CS1W-SF200_DS_E_2_1 A Safety Relay Unit That Functions as a I/O Unit. Less Installation Space and Wiring Required. Safety Relay Unit
Manual motor starter MS116
Data sheet Manual motor starter MS116 Manual motor starters are electromechanical devices for motor and circuit protection. These devices offer local motor disconnect means, manual ON/ OFF control, and
Rotary actuator for 2 and 3-way (control) ball valves Torque 5 Nm Nominal voltage AC 100... 240 V Control: Open/close or 3-point Auxiliary switch
echnical data sheet Rotary actuator LR-S Rotary actuator for and -way (control) ball valves orque 5 Nm Nominal voltage C... 4 V Control: Open/close or -point uxiliary switch echnical data Electrical data
Ordering Information. Latching Relay G2AK. Model Number Legend G2AK-@@@@@ 1 2 3 4 5. Magnetic Latching Version of G2A Ideal for Sequence Control
Latching Relay CSM DS_E_4_1 Magnetic Latching Version of G2A Ideal for Sequence Control Double-winding latch system with continuous rating. Terminals pulled from the respective junctions between the built-in
Micro Contactors. Micro Contactor Relays. Micro Contactors With Solder Pins. Coil voltages. Micro Reversing Contactor. Technical Data.
Micro Contactors Micro Contactor Relays 0 Micro Contactors Micro Contactors With Solder Pins Coil voltages Micro Reversing Contactor 3 Technical Data 4 Dimensions 8 9 Micro Contactor Relays 4pole C Operated
AXICOM Telecom-, Signal and RF Relays. Cradle Relay S V23054 / V23062. 108-98014 Nov. 07 Rev. C ECOC: JM10
Cradle Relay S V23054 / V23062 108-98014 Nov. 07 Rev. C ECOC: JM10 Disclaimer While Tyco Electronics has made every reasonable effort to ensure the accuracy of the information in this datasheet, Tyco Electronics
MICRO SWITCH EJF SERIES
MICRO SWITCH EJF SERIES FEATURES 1-piece spring mechanism design offering durable acute operation and nice touch feeling Heavy/Light operation force specifications High flux-tight structure High solder
HSP GmbH Zum Handwerkerhof 2 90530 Wendelstein Tel. 09129 / 2852-0 Fax: 09129 / 2852-11 Web: www.hsshsp.de EMAIL: HSP@hsshsp.de NTG-3000.
NTG-3000 Transducer Data Sheet Document Version 2.8 Page 1 of 10 Versions / Revisions: Document Creation Author Description version date 2.0 2012-07-25 P. Compensis First official version 2.1 2012-08-24
MILLENIUM INSTALLATION MANUAL NTR 735 A. Simple Automation Control Module (MAS)
MILLENIUM Table of contents 1. INTRODUCTION 1 2. HARDWARE DESCRIPTION 2 3. INSTALLATION 5 4. CONNECTION 6 5. USER SAFETY AND PROTECTION OF EQUIPMENT 8 1. Introduction The MILLENIUM series has been designed
93.68/93.69. Time scale: from 0.1s to 6h Multi-function For use with 34.51 (EMR) and 34.81 (SSR) relays. Screw terminal and push-in terminal
Series - Timed socket for 34 series Features.68/.69 Slim timed sockets for 34 series, 6.2 mm wide Timer adjustment via top mounted rotary knob accessible after assembly Control signal terminal DIP-switch
Electro-pneumatic control valves
Electropneumatic control valves 7 Miniature solenoid valves for alternating current Conform to the Low Voltage Directive or mounting on subbase or footprint in accordance with CNOMO recoendation E 066120N
Type Terminal Coil Contact form Model
General Purpose Relay MK Exceptionally reliable general purpose relay. Long life (minimum 100,000 electrical operations) assured by silver contacts. Built-in operation indicator (mechanical, LED), diode
Safety automation solutions
Operating principle, characteristics Preventa safety s types XPS AV,, For and switch monitoring Operating principle Safety s XPS AV, and are used for monitoring circuits conforming to standards EN/ISO
Product Catalogue. Relays with forcibly guided contacts
Product Catalogue Relays with forcibly guided contacts Product Catalogue - Relays with forcibly guided contacts Edition / Publisher: ELESTA relays GmbH, Bad Ragaz, Switzerland All rights reserved. This
13 SERIES. Electronic step relays 10-16 A 13.81 13.91
13 Electronic step relays 10-16 A 13 13.81 - Electronic step relay - Rail mount - 1 Pole 13.91 - Electronic step relay and timing step relay Switch box mount - 1 Pole Fixed time (10 minutes) timing function
Chrome DIN Rail Power Supply 24V 30W 1 Phase (Class II & NEC Class 2) / DRC-24V30W1AZ
Highlights & Features Protection Class II, Double Isolation (No Earth connection is required) Universal AC input voltage without power de-rating Efficiency > 87.0% @ 115Vac & 230Vac NEC Class 2 / Limited
Standex-Meder Electronics. Custom Engineered Solutions for Tomorrow
Standex-Meder Electronics Custom Engineered Solutions for Tomorrow Latching & Form B Reed Relays & Sensors Product Training Copyright 2013 Standex-Meder Electronics. All rights reserved. Introduction Purpose