Snap-tite H, IH & PH Series
|
|
- Godfrey Atkinson
- 7 years ago
- Views:
Transcription
1 Snap-tite, I & P Series eneral Purpose ydraulic and Pneumatic Quick ouplgs Many Standard onfigurations Suitable for ydraulic and Pneumatic pplications: Snap-tite Series couplgs have been proven by years of use on hydraulic and pneumatic applications. Series is best suited for general purpose fluid applications where either sgle or double shut-off valvg is desired. wide range of sizes, materials and end configurations are available. P version couplers and nipples are valved with a connect-under-pressure feature. These steel couplers and nipples allow connection with Series valved couplers and nipples when there is residual pressure on the P coupler/nipple side. I version couplers are steel with a cyldrical valve designed specifically for pneumatic use. When paired with an unvalved/pla Series nipple, it functions as a durable sgle-shut-off connection. ontact Information: Parker annif orporation Quick ouplg Division 8 ewis Road Mneapolis, MN phone 8 fax 8 qcd_sales@parker.com Series eatures: Sizes /"-" vailable steel, brass, alumum and staless steel Seal material options available Optional sleeve lock helps to prevent accidental disconnection Double-shut-off version has low pressure drop Manually operated sleeve provides secure connection
2 Technical and Dimensional Information Series couplgs are suitable for general purpose applications and a variety of media. They are very versatile material, size and end configuration. Valve combations clude: - Double shut-off poppet valves - Sgle shut-off on the coupler or nipple side - Straight through (unvalved/pla) Two -Piece ody onstruction Postive all-ock Design all earg Sleeve ock O-Rg and ack-up P version couplers and nipples make it possible to overcome the high connection force caused by residual pressure. The poppet valves have an added pressure relief feature to allow connection under static pressures up 000 psi ( bar). With a P Series coupler or nipple stalled on the pressurized le you can easily connect with a matg valved Series. vailable steel, sizes /8", /", /" and ". Jet Stream Valve Design ardened Sleeve ocalized Induction ardened and Series Poppet Valve Poppet as Metal-to-Metal Stop Non-Shift Valve Wide hoice of End-ittgs I version couplers have a cyldrical valve designed specifically for pneumatic systems and reciprocatg, pulsatg, rotary motion air tools. The I valve provides 0 contact when connected with an unvalved/pla Series nipple, enablg efficient operation and long life. vailable steel, sizes /", /8", /" and /". I Version yldrical Pneumatic Valve P Version onnect Under Pressure Poppet Valve Workg Pressures Valved on both coupler and nipple (Double Shut-off) Unvalved/Pla on both coupler and nipple Valved on one half and Unvalved/Pla (Straight Through) on other half (Sgle Shut-off) Size Steel lumum rass Staless Steel lumum rass Staless Steel Steel psi bar psi bar psi bar psi bar psi bar psi bar psi bar psi bar /" /8" /" /" " /" /" " /" " " NOTE: Pressure ratgs were established under static pressure conditions. Therefore, pressure ratgs for any given flow, pressure surge and/or vibration may vary from these ratgs. urst pressures listed were taken at the pot at which failure rendered the quick disconnect operative. (Proof pressure equals -/ times the workg pressure; burst pressure equals times workg pressure.)
3 low harts Series I Series Valved and Valved (Double Shut-off) OW RTE (PM)...9. M REE IR T. PSI, PRESSURE OSS (PSI) /" /8" /" /" " -/" -/" " PRESSURE OSS (R) PRESSURE OSS (PSI) /" /8" /" /" PRESSURE OSS (R) OW RTE (PM) (Mi--08 ± ) MXIMUM OW T 8 PSI IR OW RTE,. PER MIN. 0 P Series Valved and Pla (Sgle Shut-off) Valved and Valved (Double Shut-off) OW RTE (PM) OW RTE (PM) PRESSURE OSS (PSI) /" /8" /" /" " -/" -/" " PRESSURE OSS (R) PRESSURE OSS (PSI) /8" /" /" " PRESSURE OSS (R) OW RTE (PM) (MI--08 ± ) OW RTE (PM) (Mi--08 ± )
4 Valved oupler and Nipple Dimensions (without end fittg) SEE END ITTIN SEE END ITTIN D (ex) ENEMENT ENT D (ex) Size /" /8" /" /" " -/" -/" " -/" " " D * Valved oupler and Nipple End ittg Dimensions Male Tapered Pipe EM Male SE lared and MS MS emale Tapered Pipe * * * * Size /" /8" /" /" " -/" -/ " -/" " " E emale Straight and. MS * E Male SE ulk ead * emale RP ritish Parallel *
5 K J Unvalved/Pla oupler and Nipple End onfigurations emale J Pipe Thread E (ex) emale RP ritish Parallel Thread Male Pipe Thread E (ex) D (ex) K D (ex) E (ex) E (ex) E (ex) J Size /" /8" /" /" " -/" -/" " -/" " " D * E (ex) D (ex) E (ex) E (ex) E (ex) E (ex) E (ex) K J * E (ex) E (ex) NOTES: * Dimensions taken across the hex flats. Round stock with two milled flats may be substituted for hex stock. Dimensions across flats same as dimensions across hex flats. Max O.D. of round stock will not exceed the dimensions across the pots of the hex stock. Valve coupler and nipple bodies may be supplied from round bar stock without wrench flats. * Notch on hex dicates RP ritish parallel threads. E (ex) ccessories Dust caps, dust plugs and pressure caps protect disconnected couplers and nipples from damage, dirt and other contamants. Dust caps and dust plugs are available plastic and clear anodized alumum. Plastic Dust ap PD Metal Dust Plug MP Plastic Dust Plug PDP Metal Dust ap D Plastic ap and Plug Designed with a loop to fit over fittg or affixg to equipment with a sheet metal screw. vailable sizes /" thru ". lumum Dust aps and Plugs lumum dust caps and plugs are available sizes /" thru ". The /" thru /" sizes come with " chrome plated brass bead cha. The " and above come with steel zc plated sash cha. Pressure aps Pressure-tight pressure caps for nipples are standard steel, Trivalent plated. Other materials such as brass, alumum and staless steel available on special order. Sizes available /" thru ". Sizes /" thru /" come with " length of corrosion resistant steel cable. Sizes " thru " come with " of cable-all with adjustable loop at end of cable. onsult QD for special lengths. Metal Pressure ap M Sizes Plastic ap Plastic Plug lumum Plug lumum ap Pressure ap /" PD- PDP- MP- D- M- /8" PD- PDP- MP- D- M- /" PD-8 PDP-8 MP-8 D-8 M-8 /" PD- PDP- MP- D- M- " PD- PDP- MP- D- M- -/" MP-0 D-0 M-0 -/" MP- D- M- " MP- D- M- -/" MP-0 D-0 M-0 " MP-8 D-8 M-8
6 Orderg Information S V - Sleeve ock Option: S = elps to prevent accidental disconnection Seals: lank = Nitrile (ode ) J = Military variation of Nitrile for hydrocarbon fuels M = Military variation of Nitrile for MI--0 fluids V = luorocarbon E = Ethylene Propylene End ittg Type: M = Male NPT = emale NPT E = emale SE EM = Male SE lare E = ulkhead SE RP = emale ritish Parallel S9 = MS Male lare 9 = MS9 emale = MS ulkhead = MS Male = MS ulkhead End ittg Size: = /8" 0 = -/" = /" = -/" = /8" = " 8 = /" 0 = -/" = /" 8 = " = " = " ouplg alf: = oupler N = Nipple Series: = Poppet valve or pla/unvalved P = Poppet valve with pressure relief feature I = Pneumatic cyldrical valve Type: V = Valved P = Pla (without valve) Material: lank = Steel, clear trivalent platg = lumum, clear anodized = rass S = Staless Steel ouplg ody Size: = /" = -/" = /8" = " 8 = /" 0 = -/" = /" 8 = " = " = " 0 = -/" P Valve option recoended on one side, not both. vailable steel only. I available steel only. or sizes up to " NPT threads steel. or sizes up to " NPS threads staless steel. or sizes over ' NPT threads. Note: Not all configurations are standard product offerg. ontact QD for price and delivery. P I Double Shut-Off Valved oupler Valved Nipple Sgle Shut-Off Valved oupler Unvalved/Pla Nipple Straight Through Unvalved/Pla oupler Unvalved/Pla Nipple
7 Replacement Parts Valve Kits Includes valve, valve sprg and stop. Valve seal is cluded sizes /8" thru " steel, brass and alumum only. Part Number Use the base part number followed by SPK. Example: V-SPK VI-SPK Valve Seals /" valve seal is staked the coupler and nipple bodies all materials and is not considered field repairable. /8" and above are available for repair. Part Number " (size)- (seal material)" Example: -* 8-* oupler Interface Seals Includes O-rg and back-up rg. Part Number " (size)--9 (seal material)". Example: --9* O-rg and backup urrent Design Previous design was U-Packer. onsult QD for availability. *"" required for Nitrile Seal Kits. Refer to the part number code for other seal options. Standard onfigurations for eneral Purpose ydraulic and Pneumatic pplications Series P Series I Series ydraulic oupler/nipple ydraulic oupler/nipple Pneumatic oupler Valve Poppet Valve onnect-under-pressure yldrical Valve Styles: Unvalved/Pla Poppet Valve onnection Double Shut-off Double Shut-off Sgle Shut-off (connects Types: Sgle Shut-off (connects with valved with unvalved/pla Straight Through/Unvalved Series oupler or Nipple) Series Nipple) ody Sizes: /" - " /8" - " /" - /" Materials: Steel Steel Steel Staless Steel lumum rass
8 0 Parker annif orporation ullet 0-ST /US 000 / QD KP
Rated Burst Pressure 200 Series: 2.5 : 1 H200 Series: 4 : 1
200 Series 0 to 3000 psig heck Valves H200 Series 0 to 6000 psig heck Valves Features & enefits Quick opening/positive closing Provides a wide range of adaptability Large flow capacity The patented sealing
More informationQuick Coupling Products
Quick oupling Products Quick ouplings, Swivels, heck Valves, iagnostic Equipment atalog 3800 US November 2008 Parker Locations Minneapolis, Minnesota Grantsburg, Wisconsin Lincoln, Nebraska hetek, Wisconsin
More informationrelief valves 500 Series Adjustable Popoff & Inline Relief Valves 0.5 to 150 psig (10 bar)
Adjustable Popoff & Inline Relief Valves 0.5 to 150 psig (10 bar) How it Works Closed Resilient seal design prevents leakage. Sealing efficiency increase with increased pressure up to cracking pressure.
More informationPipe Valves, Fittings and Nipples Pressures to 15,200 psi
Pipe Valves, Fittings and Nipples MAXIMATOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality and reliability, backed by
More informationFittings, Tubing & Nipples
s, Tubing & Nipples P Series Pipe s s to 15,000 psi (1034 bar) Since 1945 Parker utoclave Engineers has designed and built premium quality valves, fittings and tubing. This commitment to engineering and
More informationSeries M Applicable Tubing: ø2 Connection Thread: M3, M5
iniature Fittings Series pplicable Tubing: ø2 onnection Thread:, RoHS ade to Order (Refer to page for details.) pplicable O.D. x I.D.: ø2 x ø.2 onnection thread: / One-touch fitting size: ø.2 / ø Tubing
More informationDT Series. Features FLOW. DT-MFMO Male Flare 37 JIC Inlet to Male O-Ring Boss Outlet. DT-MSMO Male Seal-Lok Inlet to Male O-Ring Boss Outlet
Check s Parker Check s Offer the eatures of a Compact, and up to 5 psi Maximum Operating Pressure. The check valves utilize the de pend able, internal design features found in Parker check valves, but
More informationHigh Pressure Equipment High Pressure Valves, Fittings and Tubing
igh quipment igh Valves, ittings and Tubing 0,000, 40,000 and psi service igh quipment Company has developed a line of igh products to assure safe and easy plumbing for 0,000, 40,000 and psi. These needle
More informationNow Available in Black Zinc Nickel
847/848 Series Power Supply up to 63 Now vailable in lack Zinc Nickel The 847/848 bayonet Series has been especially designed for light and harsh environment. Its physical characteristics and performances
More informationIndicators Series FPC
Indicators Series FP Max 40 bar Global Filtration Technology FP TYPIAL APPLIATIONS Industrial Equipment Mobile Equipment Marine/Offshore Applications ompetitor Housing The FP range of filter condition
More informationQuick Coupling Products
Quick Coupling Products Quick Couplings, Swivels, Valves, Diagnostic Equipment Catalog 3800 USA February 2014 Locations Grantsburg, WI Chetek, WI Union City, PA FAILURE OR IMPROPER SELECTION OR IMPROPER
More informationFRL/AirCare Air Controls & Accessories
FRL/irare ir ontrols & ccessories Lincoln Regulators, Filters & Lubricators well-planned compressed air system ensures minimum pressure loss in the system, and the removal of contaminants: water, compressor
More informationShut-off & Lockout Valves 1/4" to 1-1/2" port size
Section 16 Shut-off & Lockout Valves 1/4" to 1-1/2" port size Contents T72 Excelon Shut-off & Lockout Valves 1/4", 3/8" Port Sizes....................................ALE-16-2 T73 Excelon Shut-Off & Lockout
More informationMACHINES RECOVERY SYSTEMS SUPEREVAC CHARGING HOSES VACUUM AND HOSE ADAPTERS, VALVES AND PARTS CHARGING SYSTEMS GAUGES INSTRUMENTS ELECTRONIC
RECOVERY SUPEREVAC 29 RECOVERY 1/4" 4-IN-1 BALL VALVE TOOL For vacuum, charge, cores and recovery 18997 18975 18971 18978 18979 Remove and replace Schrader cores without losing charge. Extra 1/4" side
More informationPipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).
Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)
More informationCheck Valves & Actuated Valves
heck Valves & ctuated Valves & U Series Piston non-return valves rated 6,000 psi & 10,000 psi X Series Piston non-return valves rated 20,000 psi Pneumatic ctuators Pneumatically actuated valves Electric
More informationFITTINGS 5-01. 82A series Aluminium (light weight) compression fittings Ø 6... 42 mm tube size, BSPP and BSPT thread
FITTINS 82 series luminium (light weight) compression fittings Ø 6... 42 mm tube size, SPP and SPT thread 82 series rass compression fittings Ø 6... 42 mm tube size, SPP and SPT thread 83 series luminium
More informationPneumatic Grippers Parallel and Angular Grippers. Catalog 1900-2/US
Pneumatic Grippers Parallel and Angular Grippers Catalog 19-2/US Catalog 19-2/US OContents GPR Series Rotary vane driven design GPR GPCR Series P5G-HPM(C) Series P5G-HP Series GPT Series P5G-AP Series
More information3 WAY (3/2) POPPET VALVES FOR AIR AND VACUUM SERVICE SOLENOID OR AIR ACTUATED BROCHURE N-223
3 WAY (3/2) POPPET VALVES FOR AIR AND VACUUM SERVICE SOLENOID OR AIR ACTUATED BROCHURE N-223 HERION S HIGH PERFORMANCE POPPET VALVES For those applications requiring high Cv, fast response times, large
More informationStainless Steel Single and Dual Circulation Kits
Instruction Sheet P/N 160780 01 Stainless Steel Single and Dual Circulation Kits Introduction The single and dual high-pressure circulation kits allow you to vary and control the circulation rate of coating
More information4/2-Way Pneumatic Solenoid Valve
4/2-Way Pneumatic Solenoid Valve Robust servo assisted piston valve Service friendly manual override Single or block assembly Explosion-proof versions Type 5413 cam be combined with Type 2508 Cable plug
More informationThese features have made Lo Torc valves the choice of high pressure plug value users, worldwide:
LO TORC Plug Valve The high value, dependable performance, and low maintenance requirements of Halliburton Lo Torc valves can help reduce overall operating costs and help cut downtime. These features have
More informationWear Resistant Tubing
Wear Resistant Tubing 1/ brasion: pprox. (Compared with SMC polyurethane tubing TU series) 3 6-color variations Description Wear resistant tubing TUZ series Polyurethane tubing TU series Green RoHS Maximum
More informationHose Clamps & Fittings
All Stainless Steel Marine or Underground Hose Clamps 5/16 HEX HEAD SCREW 60000 SERIES Highly corrosion resistant Use for marine or underground applications Stainless Steel Band, Housing Plated Steel Screw
More informationFittings, Tubing & Nipples
Fittings, Tubing & Nipples Medium Pressure Pressures to 20,000 psi (1379 bar) Since 1945 utoclave Engineers has designed and built premium quality valves, fittings and tubing. This commitment to engineering
More information3/2-way Mini Solenoid Valve
3/2way Mini Solenoid Valve Directacting 0... bar DN mm... DN mm,,, subbase, banjobolt connection 21mm coil spacing when mounted on manifold Type can be combined with... Type 20 Type 207 Type able plug
More informationVIKING HEAVY DUTY PUMPS SERIES 4195 STANDARD CONSTRUCTION
VIKING HEAVY DUTY PUMPS Section 44 Page 44. Issue C FEATURES Pressure Range Temperature Range Viscosity Range 250 PSI ( BAR) for 00 SSU ( cst) and above 50 PSI (0 BAR) for 8 to 00 SSU ( cst to cst) 00
More informationHose and Tube Fittings Series 1-3
Embracing Challenge Hose and Tube Fittings Series 1-3 out of plastics PP, PVDF, PTFE Series 1 Special Features Corrosion resistant Gas tight Easy to handle Different connection threads Application Hose
More informationFittings, Tubing & Nipples
Fittings,Tubing & Nipples - Medium Pressure Fittings, Tubing & Nipples Medium Pressure Pressures to 20,000 psi (1379 bar) Since 1945 utoclave Engineers has designed and built premium quality valves, fittings
More informationTY-FLO Needle Valves
Design/Features Hard (Vee) or Delrin Soft Seat/Tip Orifice sizes from.17 to.438 in. Flow Coefficients (C V ) from.37 to.7 Straight or angle flow patterns Optional panel mount Handle options available Non-wetted
More informationUM/22000 5/2 or 5/3 Solenoid and air pilot actuated soft spool valves
U/ / or / > > Sub-base mounted, 99- s,, or > > Steel reinforced main seals > > Low power coils (,W) > > Wide range of sub-bases and accessories > > 6 bar and bar NOO solenoid pilots with locking or non-locking
More informationAeroquip Series 1800 & 1801 Low Profile Ratchet Lock Couplings. Lightweight Self-Sealing Compact Design Minimum Pressure Loss
Aeroquip Series 1800 & 1801 Low Profile Ratchet Lock s Lightweight Self-Sealing Compact Design Minimum Pressure Loss Aeroquip Low Profile Ratchet Lock s, Caps and Plugs 1800 and 1801 Series Lightweight,
More informationDirect Operated Regulator for 6.0 MPa (Relieving Type) How to Order. Body size 30 40
Direct Operated Regulator for (Relieving Type) Series Service life: 0 million cycles Using NSF-H-certified grease on the guide ring (sliding) part. Improved durability under a high environment with a polyurethane
More informationVOYAGER 570G. 744A Sprayer Control
VOYAGER 570G 744A Sprayer Control U S E R M A N U A L U S E R M A N U A L Table of Contents CHAPTER 1 - INTRODUCTION...1 SYSTEM CONFIGURATIONS...1 KIT CONTENTS...3 CONTROL HOUSING ASSEMBLY...5 CHAPTER
More informationFittings, Tubing & Nipples
Fittings, Tubing & Nipples High Pressure Pressures to 150,000 psi (10342 bar) Since 1945 utoclave Engineers has designed and built premium quality valves, fittings and tubing. This commitment to engineering
More informationNeedle Valves. Needle Valves - High Pressure. 30SC, 43SC, 30VM, 40VM, 60VM, 100VM & 150V Series. High Pressure. Pressures to 150,000 psi (10342 bar)
Needle Valves High Pressure 30S, 43S, 30V, 40V, 60V, 00V & 50V Series Pressures to 50,000 psi (0342 bar) Since 945, utoclave ngineers has designed and built premium quality valves, fittings and tubing.
More informationHydraulic Flow Control Valves
Webtec Products Limited Hydraulic Flow Control Valves Quality Hydraulic Components from the Webtec Range CONTENTS DESCRIPTION PAGE No. ILFC Series Fixed Flow Pressure Compensated Control Valve 1 VFC Series
More informationAIR LINE VALVES AND GAUGES
AIR LINE VALVES AND GAUGES INGERSOLL-RAND AIR LINE VALVES AND GAUGES Maintaining consistent air pressure throughout the entire system is crucial for maximum performance and productivity. Ingersoll-Rand
More informationComplete Systems & Parts Automatic Oiler & Grease Bank
MADE IN THE USA Complete Systems & Parts Automatic Oiler & Grease Bank www.gosuburban.com 2 Lubrication Systems Lubrication Systems, a division of Suburban Manufacturing, manufactures a complete line of
More informationCAT. 0113-GB MODELS. Series. Flat-face quick-release couplings. UNI EN ISO 9001 Cert. n 2905 ISO/TS 16949
CAT. 0113-GB NEW MODELS Flat-face quick-release couplings UNI EN ISO 9001 Cert. n 2905 ISO/TS 16949 FLAT-FACE QUICK-RELEASE COUPLINGS Features Benefits Applications Flat-face shut-off valves: easy to clean.
More informationBody Size 1/4" up to 1" ISO A-Profile 6600-Series TEMA ISO A
Ball ocking TEM ISO ISO 7241-1 Series ISO B 1/4" up to 1" ISO -Profile 6600-Series ISO F Technical escription The couplings of the 6600 series meet the requirements and dimensions of the ISO 7241-1 standard.
More informationUNLOCK THE SOLUTION 1
UNLOCK THE SOLUTION 1 construction agriculture automation chemical plastics off-shore/land based oil & gas pulp & paper public utilities pharmaceutical marine food processing military mining forestry mobile
More informationManapak Sandwich Valves Series CM, CPOM, FM, PRDM, PRM, RM
Introduction Manapak valves provide a variety of check, flow control, pressure relief and pressure reducing functions in a compact NFPA D03, D05 and D08 sandwich style valve. The NFPA D03 valve body conforms
More informationRefrigeration and air conditioning Date: 10/2013
Catalogue 40 WEH Connectors for filling, evacuating and testing of refrigeration and air conditioning components Refrigeration and air conditioning Date: 10/2013 WEH - We Engineer Hightech All rights reserved,
More informationSLAM-SHUT VALVE. Type OSE. Europe, Middle East, Africa and Asia Pacific Documents Only. Process Management TM
SLAM-SHUT VALVE Type OSE Process Management TM DESCRIPTION The purpose of the OSE slam shut valve is to totally and rapidly cut off gas flow when the outlet pressure exceeds or drops below the setting.
More informationLimit Switches/ Receptacle Assembly... For Nuclear Environments
180-302/402 Series Inside ontainment reas TM Limit Switches/ Receptacle ssembly... or Nuclear nvironments eatures: Qualified to I s 344-1975, 323-1974, and 382-1972. Manufactured to a quality assurance
More informationVCR Metal Gasket Face Seal Fittings
www.swagelok.com Metal Gasket Face Seal Fittings 1/16 to 1 in. and 6 to 18 mm sizes High-purity stainless steels The original design, the authentic brand 2 Metal Gasket Face Seal Fittings ontents Typical
More informationMODEL G300 BRAKE BLEEDER
MODEL G300 BRAKE BLEEDER Installation, Operation & Repair Parts Information Branick Industries, Inc. 4245 Main Avenue P.O. Box 1937 Fargo, North Dakota 58103 REV060616 P/N: 81-0035G 1 THIS PAGE INTENTIONALLY
More informationMikrotherm. Manual radiator valves. To be precise.
Manual radiator valves To be precise. Description HEIMEIER Mikrotherm manual radiator valves made of corrosion-resistant gunmetal, with white plastic hand wheel cap, tight-packed with protection film.
More informationTHE SIMPLEX HAND PUMP
INTRODUTION HND PUMPS THE SIMPLEX HND PUMP Pivoting linkage reduces wear for longer pump life. djustable pivot for the absolute lowest handle effort. Large bronze piston for more speed and durability.
More informationFlare Fittings. The World Standard. SAE 45 Flared Fittings... D4. Inverted Flared Fittings... D14. Access Valves... D18
Flare Fittings SAE 45 Flared Fittings... 4 Inverted Flared Fittings... 14 Access Valves... 18 The World Standard Flare Fittings Flare to ale PT 48F ale Connector 481FH ale Connector AVU1 ale Connector
More informationVe-Lock manufactures Needle Valves from Solid bar stock Materials & all parts details are as below:
Needle Valves : - Needle valves have a slender, tapered point at the end of the valve stem that is lowered through the seat to restrict or block flow. Fluid flowing through the Needle valve turns 90 degrees
More informationPipe Thread Types and Designations
Pipe Thread Types and Designations Overview: Different types of screw threads have evolved for fastening, and hydraulic systems. Of special concern are plastic-to-metal, taper/parallel threaded joints
More informationMueller B-101 and A-3 Drilling and Tapping Machines
TM TM Mueller and Drilling and Tapping Machines A guide to selecting Mueller Equipment Mueller TM TM and Drilling and Tapping Machines When it comes to line stopping and drilling and tapping technology
More informationSMA Aluminum Cylinders
SMA Aluminum Cylinders PNEUMATIC TO 200 PSI HYDRAULIC 250 TO 400 PSI Non shock /8,, 2, 3 BORE SPACE SAVING AND CONVENTIONAL DESIGNS REPAIRABLE Very high quality Pancake type cylinders with all of the engineering
More informationCartridge Valves. Solenoid Valves. Vickers. Screw-in Cartridge Valves. Maximum Pressure 210 bar (3000 psi) Maximum Flow 227 l/min (60 USgpm)
Vickers Cartridge Valves Solenoid Valves Screw-in Cartridge Valves Maximum Pressure bar ( psi) Maximum Flow 7 l/min (6 USgpm) Rev /99 77 Introduction For over seventy years, Vickers has provided its customers
More informationRound Housing with Side Ports
Power Steering Steering Control Unit (SCU) Parts and Repair Information 5 Series Steering Control Units 001 Square Housing with Side Ports Round Housing with Side Ports T E L RP Round Housing with End
More informationFittings, Tubing & Nipples
Fittings, Tubing & Nipples High Pressure Pressures to 150,000 psi (10342 bar) Since 1945 Parker utoclave Engineers has designed and built premium quality valves, fittings and tubing. This commitment to
More informationSIMPLAIR PIPING. www.irtools.com 1-800-376-TOOL
SIMPLAIR PIPING INGERSOLL-RAND SIMPLAIR PIPING With push-in fittings and lightweight anodized aluminum pipe, a SimplAir system provides ideal connection throughout your entire air distribution system.
More information9013 PUMPTROL Commercial Pressure Switches Type F and 9013 Commercial Pressure Switches Type G. January. Catalog
9013 PUMPTROL Commercial Pressure Switches Type F and 9013 Commercial Pressure Switches Type G Catalog January 07 Contents Commercial Pressure Switches Pressure Switches b Selection..............................................
More informationScraper Passage Indicator. Electrical Indicator. Features
IV Scraper Passage Indicator Bulletin No: 5110.001.03 Date: June 2008 Cross Indexing No: n/a Supersedes: 5110.001.02 (1/06) Flag Indicator Electrical Indicator Options Description TDW s IV Scraper Passage
More informationWorking Pressure - Hose Ends
Working Pressure - Hose Ends The maximum dynamic working pressure of a hose assembly is the lesser of the rated working pressure of the hose and the end connection used. HIGH SPECIALTY HOSE ACCESSORRIES
More information15/40/80CN Series Coreless Medium Pressure Filters
//8CN Series Coreless Medium Pressure Filters //8CN Series Applications Compressor Lube Oil Off-line Filter Loops Machine Tools (Automotive Standard) Hydrostatic Drive Charge Pumps Mobile Equipment Pilot
More informationHOSE, TUBE, AND PIPE CLAMPS
hose, tube & clamp B/W pages 24/6/08 9:28 AM Page 2 HOSE, TUBE, AND PIPE CLAMPS TABLE OF CONTENTS Introduction 3 Construction 3 Application 3 Mounting 3 Standard Duty Clamps (HRL) Arrangements 4 Dimensions
More informationFlow Control Valves. Note: Also see R04C3 on page DC1. Denotes New Winner s Circle Product Line. Catalog HY15-3502/US
Catalog HY15-352/US Contents Control SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI NEED VALVES J2A2... C8-2... Needle Valve, Cartridge Type...45/12... 42/6... 5-6 NVH81... C8-2... Needle
More informationSQUARE D INDUSTRIAL CONTROL PRODUCTS
SQUARE D INDUSTRIAL CONTROL PRODUCTS CLASS 9012 3a INDUSTRIAL PRESSURE SWITCHES Type A Heavy duty switch for virtually any industrial application involving air, water, steam or oil Bellows, piston and
More informationQLM and QLD Series Three-port Control Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationOPTIMIZE UPTIME WITH TIMKEN LUBRICATORS
OPTIMIZE UPTIME WITH TIMKEN LURITORS 1 Discover a better way to choose the right lubricators pplying lubrication exactly where and when it s needed will help keep your operations running smoothly. Timken
More informationFittings and Tubing. Low Pressure. Fittings and Tubing - Low Pressure. Low Pressure Fittings and Tubing Features: Pressures to 15,000 psi (1034 bar)
ittings and Tubing - Low Pressure ittings and Tubing Low Pressure Pressures to 15,000 psi (1034 bar) Since 1945 utoclave ngineers has designed and built premium quality valves, fittings and tubing. This
More informationGAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES
GAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES CONTINENTAL INDUSTRIES ABOUT US THE ULTIMATE CONNECTION Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and is today
More informationGROENEVELD AUTOMATIC GREASING SYSTEMS
GROENEVELD AUTOMATIC GREASING SYSTEMS TWIN Parts & Accessories Book Pumps, Fittings, Injectors, Lining, etc. www.groeneveld-group.com 1 TWIN ELECTRICAL Item Part # Description 1 F113966 Switch 24V 2 F122991
More informationAir Conditioning & Refrigeration Master Catalog. Catalog CIC-2003-1/USA April 2003
Air Conditioning & Refrigeration Master Catalog Catalog CIC-2003-1/USA April 2003 Table of Contents Table of Contents Service Valves Frontseating Valves... page 115 RB01 Series Ball Valves... page 117
More informationInstallation Instructions 4662.003
Installation Instructions.00 SINGLE CONTROL KITCHEN FAUCET Thank you for selecting American-Standard...the benchmark of fine quality for over 00 years. To ensure that your installation proceeds smoothly--please
More informationTransport & Automotive CATALOGUE. March 2011. Customer Service Phone: 1800 777 299 Fax: 1800 065 321 Email:sales@tubefit.com.au. www.tubefit.com.
Transport & Automotive CATALOGUE Customer Service Phone: 1800 777 299 Fax: 1800 065 321 Email:sales@tubefit.com.au March 2011 www.tubefit.com.au Page 1 4 6 9 12 14 16 17 19 20 22 23 24 26 28 29 31 33 Index
More informationNORMAN FILTER COMPANY PRODUCT OVERVIEW
NORMAN FILTER COMPANY PRODUCT OVERVIEW LEADING THE WAY IN QUALITY FILTRATION WWW.NORMANFILTERS.COM FILTER ELEMENT INTERCHANGE Tee-Type Filter 4500, 14500, 34500, and 54500 Series Mini Tee-Type Filter 4100
More informationNeedle Valves. Needle Valves Part Matrix. Flow Coefficient (C v ) belgas.net < 129 >
Needle Valves elgs Standard Needle Valves offer four choices in 316 stainless steel as well as one piece forged carbon plated steel; soft seat and hard seat, angle and globe styles. The Mini Valve offers
More informationBRASS FITTINGS FOR THREADED PIPES
03/14 BRASS FITTINGS GENERAL FEATURES The brass fittings for threaded pipes are used as junctions for pipelines with threaded connection UNI ISO 228/1. The thread dimensions are subdivided in various types
More informationQuick Connect. RTDs, Cordsets and Transmitter with M12 Connections
Quick Connect RTDs, Cordsets and Transmitter with M12 Connections 1 Temperature Measurement Experts Since 1960, urns Engineering has been an industry leader in the design and manufacture of temperature
More informationSealed Industrial Ethernet Circular IP67 Cat. 5e RJ45 Connector System
Revised Sept--22-2009 Sealed Industrial Ethernet Circular IP67 Cat. 5e RJ45 Connector System Description The sealed circular RJ45 connector system is designed for use in harsh environments. The connector
More informationSpecifications. Model Flow type Pressure type. Air Maximum operating pressure. 1.0 MPa Ambient and fluid temperature. 3% F.S.
Electro-Pneumatic Proportional Valve Series /VEP Electro-pneumatic proportional valve: Flow type () Controls the flow rate steplessly according to current. (It is a / port valve that has an electrical
More information08.08 Vic-Check Valves
The check valves are a product of computer-assisted innovative engineering with quality features including a new hydrodynamically efficient profile. The Vic-Check valve utilizes a spring-assisted, single-disc
More informationReturn line filters. Return line filters
Return line filters Return line filters Index Technical data - 5 Filters series 6 Filters series --3 8 ccessories Spare parts Uni-ardan Italia S.p.. reserves the right to make technical changes to the
More informationcherne industries inc.
cherne industries inc. B est in the Business 800.843.7584 product catalog 2 Welcome to Cherne Industries Inc. An ISO9001-Certified Company Since 1998, Cherne Industries has been certified to the ISO9001
More informationVSO MAX HP High Flow Proportional Valve
VSO MAX HP High Flow Proportional Valve Typical Applications Ventilators Insufflators Anesthesia Delivery & Monitors Pressure & Flow Control Mass Flow Control Product Specifications Physical Properties
More informationWorkshop Compressors CLASSIC Series
www.kaeser.com Workshop Compressors CLASSIC Series Displacement: 210 to 40 l/min Pressure: 10 bar What do you expect from your CLASSIC workshop compressor? Quality results can be achieved only by using
More informationIMPORTANT DOCUMENTATION DO NOT DISCARD!
PART NO.: 6441-263C SERIES GRT 3 JAW PARALLEL GRIPPERS INFORMATION SHEET IMPORTANT DOCUMENTATION DO NOT DISCARD! Use this information sheet to assist with gripper installation and setup. File with maintenance
More informationUniversal Installation and Maintenance Instructions Double Wall Spill Containment Bucket (5 and 15 gal)
Universal Installation and Maintenance Instructions Double Wall Spill Containment Bucket (5 and 15 gal) IMPORTANT: It is imperative that the user read these warnings and use of the assembly instructions
More informationArecont Vision H.264 Color or Day/Night SurroundVideo Series Installation Manual
0 P a g e H.264 Color or Day/Night SurroundVideo Installation Manual Inside the box: A. Arecont Vision SurroundVideo camera B. Mounting template C. RJ45 female to female coupler D. Hex key E. Security
More informationKA/8000/M, KA/8000, ISO cylinder (Stainless steel) Magnetic & Non-magnetic piston, double acting
K/8000/M, K/8000, ISO cylinder (Stainless steel) > > Ø 3... 00 mm > > High corrosion and acid resistance > > Ideal for applications in the food industry > > Conforms to DIN ISO 555, DIN ISO 63, VDM 56
More informationRUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a wafer valve designed for a wide range of industrial applications. The double-seated design provides bi-directional shut off. The design of the valve
More informationOPERATING and MAINTENANCE MANUAL SERIES 2700A CONTROL VALVE CONTENTS. INTRODUCTION...1 Scope...1 Description...1 Valve Identification...
OPERATING and MAINTENANCE MANUAL SERIES 2700A CONTROL VALVE CONTENTS INTRODUCTION...1 Scope...1 Description...1 Valve Identification...2 1.0 VALVE INSTALLATION...2 2.0 VALVE MAINTENANCE...3 Actuator Disassembly...3
More informationDouble-Headed Screw 1. 3/4" FIP x 3/4" MIP x 1/4" hole 2. 3/4" Fip x 3/4" MIP. Feed Water Connector 1. 1/2" FIP x 1/2" MIP x 1/4" OD 2. 3.
Picture Item No. Description RO- 0010 Brass Water Feed 1. 3/4" FIP with 1/4" hole 2. Using on R.O. tank RO- O020 Double-Headed Screw 1. 3/4" FIP x 3/4" MIP x 1/4" hole 2. 3/4" Fip x 3/4" MIP RO- 0030 Brass
More informationPneumatic. PXC Limit Switches. Authorised Distributor TTS Valve Technologies Sdn Bhd
Pneumatic PXC Limit Switches Limit Switches Series PXC High durability Very good repeat accuracy Design for process duty cycle Push-in or threaded connection Versatile and easily maintained Wide range
More informationProduct Manual. CVS Type 67AFR Filter Regulator. Introduction. Installation. Description
Product Manual CVS Type 67AFR Filter Regulator Introduction This CVS Controls product manual includes instructions for the installation, adjustment, maintenance and parts ordering of the CVS Type 67AFR
More informationTECHNICAL SPECIFICATION
THOMAS - G-FLEX GFLEX TECH SPEC CONNECTING INNOVATION JOHANNESBURG TEL: +27 11 794 7594 CAPE TOWN TEL: +27 21 556 5258 POLOKWANE TEL: 015 298 9142 DESIGNER, MANUFACTURER AND DISTRIBUTOR OF PIPE CONNECTION,
More informationCheck Valves Valve locator
Check Valves Valve locator Functional Symbol Flow Typical Model Cavity Rating Pressure Page Check valve, direct L/min (USgpm) bar (psi) FPR/4 Inline () 5 (5) - FPR/8 Inline (8) 5 (5) - FPR/ Inline 45 ()
More informationUniversal Installation and Maintenance Instructions 71CD-1212 Spill Containment Bucket
Universal Installation and Maintenance Instructions 71CD-1212 Spill Containment Bucket IMPORTANT: Please read these instructions completely and carefully before installing Universal s 71CD-1212 Spill Containment
More informationPILOT OPERATED PRESSURE RELIEF VALVE - Series VR4V
PILOT OPERTED PRESSURE RELIEF VLVE - Series VR4V The Veljan Pressure Relief Valve series VR4V are pilot operated and wk Internal Dra on the prciple of hydraulic balancg. These valves are used to limit
More informationswimming pool accessories
76 swimming pool accessories 77 Dolphin pool cleaners Dolphin Plus Battery Cordless pool cleaner with lithium ion battery Cleans the pool in 1.5 hours Special programs Clogged filter bag indicator Incl.
More informationModel F822 thru F834 Mulsifyre Directional Spray Nozzles, Open, High Velocity General Description
Worldwide Contacts www.tyco-fire.com Model F thru F3 Mulsifyre Directional Spray Nozzles, Open, High Velocity General Description The Mulsifyre Nozzles are open (nonautomatic) nozzles and they are designed
More information