TY-FLO Needle Valves
|
|
- Claribel Lang
- 7 years ago
- Views:
Transcription
1
2 Design/Features Hard (Vee) or Delrin Soft Seat/Tip Orifice sizes from.17 to.438 in. Flow Coefficients (C V ) from.37 to.7 Straight or angle flow patterns Optional panel mount Handle options available Non-wetted stem threads SPECIFICATIONS 316 Stainless Brass Steel Pressure Rating 1 psig (bar) Temperature Rating F ( C) Hard Seat Soft Seat Hard Seat Soft Seat Hard Seat Soft Seat 1, (689) -1 to (-3 to 93) 6, (413) 6, (413) -1 to (-3 to 93) 3, (6) 1, (689) -1 to (-3 to 93) 6, (413) 1 For pressure ratings of valves with tube fitting end connections, see CBC-Lok or CS-Lok catalogs. Temperature ratings based on working temperature of standard stem seals. See o-ring/packing options for temperature ratings of optional stem seals and soft seat valve. Materials of Construction # Component 316 SS Brass Steel 1a Mini T Handle 316 SS N/A Steel 1b T Handle 316 SS N/A Steel 1c Round Knurled Handle 316 SS Brass Steel 1d 1-3/8 Plastic Handle Phenolic 1e 1-3/4 Plastic Handle Phenolic Set Screw 316 SS Steel 3 Dust Cap 1 Vinyl 4 Valve Bonnet 316 SS Brass Steel 5 Valve Stem 1 Hex Bar Stock and 1/ Angle Valves only Chrome-plated 316 SS 316 SS 6 Bonnet Lock Pin SS N/A Steel 7 Stem Back-up Ring Teflon 8 Stem O-Ring Viton 9 Valve Body 316 SS Brass Steel 1a 1b 1c 1d 1e Testing Tylok are 1% Helium leak tested to 1 x 1-4 ml/s ensuring performance and reliability For Orders and Information Visit Us Online at
3 CBC-Lok double ferrule tube ends are completely interchangeable with Swagelok and Parker A-Lok tube ends. CS-Lok single ferrule tube ends are completely interchangeable with Parker CPI tube ends. Valve Dimension Table End Connections Inlet/Outlet CBC-Lok tube fittings CS-Lok tube fittings Size, in. Basic Part Number 1/4 4-6DD-4 3/8 6-6DD-6 1/ 8-6DD-8 1/4 4-6SS-4 3/8 6-6SS-6 1/ 8-6SS-8 1/8-6FF- 1/4 4-6FF-4 Orifice in. (mm) C V Hard Seat (Soft Seat/Tip).37 (.37).37 (.37).4 (.4) Dimensions, in. (mm) A B C D E F G H1 H J.46 (6.5) 3.8 (78.) 3.3 (83.8).46 (6.5) 3.8 (78.) 3.3 (83.8) 1.3 (31.) 1.54 (39.1) 1.65 (41.9) 1.3 (31.) 1.54 (39.1) 1.65 (41.9).91 (3).33 (8.4) 3/4.37 SQ (9.4) /4 (16) HEX.33 (8.4) 3/4.37 SQ (9.4) /4 (16) HEX.38 (9.7) 3/4 SQ.17 (55.1).13 (54.1) (8.3) (63.5).17 (55.1).13 (54.1) (8.3) (63.5).9 (53.1) (38.1) (.4) 1.13 (8.7) (.4) (53.1) (8.7) Female NPT 3/8 6-6FF-6 1/ 8-6FF-8 3/4 1-6FF-1 (.76).5 (63.5) 1.5 (31.7).63 (16) 1-1/4 HEX 3.16 (8.3).5 (63.5). (5.8) 1.38 (35.1) 1.38 (35.1) 3.66 (93) FF / (11.1) (18) (54) HEX (18) (18) 1-1/4-6FF- Male NPT Male/Female NPT 1-1/ 4-6FF-4 1/8-6MM- 1/4 4-6MM-4 1/8-6MF- 1/4 4-6MF-4 1/ 8-6MF-8 3/4 1-6MF (.4).4 (.4) (.76) 3.5 (88.9).91 (3).91 (3) (9.7).38 (9.7).63 (16) 3/4 SQ 3/4 SQ 1-1/4 HEX.9 (53.1).9 (53.1) 3.16 (8.3).5 (63.5) (38.1) (5.8). (5.8) (.4) 1.13 (8.7) (.4) 1.13 (8.7) 1.38 (35.1).7 (18.3).9 (53.1) (.4).7 (18.3).9 (53.1) (.4) (35.1) (93) MF / (11.1) (133.4) (54) HEX (18) (18) 1-1/4-6MF- 1-1/ 4-6MF-4 Dimensions shown with tube fitting ends finger-tight and standard configurations. Dimensions subject to change. For Orders and Information Visit Us Online at 3
4 Panel Mount Details 15/16 HEX NUT.16 THICK 5/8-18 THREAD 15/16 HEX NUT.16 THICK 5/8-18 THREAD 1/8 MAX PANEL 3/16 MAX PANEL 7/16 7/8 1/ 1-1/3 Dimensions For : Square Bar Stock 1/4" and Smaller Angle Valves Dimensions For : Hex Bar Stock 1/" Angle Valves Handle Options PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF TYLOK INTERNATIONAL, INC.. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF TYLOK INTERNATIONAL, INC. IS PROHIBITED. UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN INCHES TOLERANCES: FRACTIONAL 1/64" ANGULAR: MACH 1 TWO PLACE DECIMAL.1 THREE PLACE DECIMAL.5 FOUR PLACE DECIMAL.5 MATERIAL Material <not specified> FINISH N/A DO NOT SCALE DRAWING DRAWN CHECKED ENG APPR. NAME XXX XXX XXX DATE XX/XX/XX XX/XX/XX XX/XX/XX COMMENTS: 1) REMOVE ALL BURRS. ) BREAK ALL CORNERS.1 MAX. EXCEPT AS NOTED. 3) ALL MACHINED SURFACES 15 MICRO FINISH EXCEPT AS NOTED. TITLE: PART NO. TYLOK INTERNATIONAL EUCLID, OHIO Part# Assembly Name SCALE: 1: WEIGHT:. REV. Standard Handles 316 SS Brass Steel Square Bar Stock and 1/4 and Smaller Angle Valves H1 H3 H1 Hex Bar Stock and 1/ Angle Valves H N/A H The handle material will always match the valve body, unless otherwise specified. For Orders and Information Visit Us Online at 4
5 Flow Data at 1 F (37 C).45 Orifice (.17) Hard & Soft Seat (NPT) Orifice (.17) Hard and Soft Seat (NPT) Orifice (.17) Hard & Soft Seat (Tube Fittings) Orifice (.17) Hard and Soft Seat (Tube Fittings).5 Orifice Seat Orifice () Hard Seat # # Turns Open # Turns Open #.8 Orifice Orifice () Soft Soft Seat Seat 3 Orifice Orifice (.438) Hard Seat Seat # # Turns Open # # Turns Open O-Ring/Packing Options Temperature Ratings: -1 F to F with Viton O-Ring -65 F to 15 F with EPDM O-Ring -13 F to 3 F with Kalrez O-Ring -65 F to 5 F with Teflon Packing - F to 4 F with Grafoil Packing F max with Soft Seat/Tip Valves Packing style detail shown above 5 For Orders and Information Visit Us Online at
6 HOW TO ORDER How to order Ty-Flo needle valves are ordered as listed in this catalog by inserting the material code before the part number. Special configurations available upon request. Example: A stainless steel needle valve with 1/ CBC-Lok tube fitting inlet to 1/ CBC-Lok tube fitting outlet with nut panel mount option, Grafoil packing and 1-3/4 phenolic handle is designated as follows. SS DD P - G - H5 Material Inlet Size Style Inlet/Outlet Outlet Size Options Seal Handle Chart 1 Chart Chart 3 Chart 4 Chart Chart 5 Chart 6 Chart 7 Chart 1 - Material SS Stainless Steel B Brass S Steel Chart - Valve Size Designator Port Size 1/8 4 1/4 6 3/8 8 1/ 1 3/ / / Chart 3 - Style 6 Needle Valve Chart 4 - Inlet/Outlet Port Designator Inlet Outlet DD CBC-Lok Tube Fitting CBC-Lok Tube Fitting SS CS-Lok Tube Fitting CS-Lok Tube Fitting MM Male NPT Male NPT FF Female NPT Female NPT MF Male NPT Female NPT Chart 5 - Options A L P1 P Chart 7 - Handle Options H1 H H3 H4 H5 Angle Pattern Delrin Soft Stem/Seat Panel Mount (1 nut) Panel Mount ( nuts) Mini T Handle T Handle Round Knurled Handle 1-3/8 Phenolic Handle 1-3/4 Phenolic Handle *See handle options section for standard handles Chart 6 - Stem Seal EM1 KZ1 G T (Viton O-Ring Standard) EPDM 8 O-Ring Kalrez 318 O-Ring Grafoil Packing Teflon Packing Example: SS-6-6DD-6-P-T Designates a Stainless Steel needle valve, with a 3/8 CBC-Lok tube fitting inlet to a 3/8 CBC-Lok tube fitting outlet with a nut panel mount option and optional Teflon packing. Example:B-4-6FF-4-A Designates a Brass angle needle valve with a 1/4 female NPT inlet to a 1/4 female NPT outlet. REGISTRATIONS & TYPE APPROVALS Euclid, Ohio 4413 USA info@tylok.com web: tel: (16) toll free: (8) fax: (16) Doc. 734 Rev. B
needle valves Needle Valves Index At a Glance 1
Needle Valves Index At a Glance 1 1700 Series 5 Forged Body, Integral Bonnet Needle Valves 2100 Series 8 Bar Stock, Screwed Bonnet Needle Valves 2200 Series 12 Bar Stock, Screwed Bonnet Needle Valves 2219
More informationKF Needle & Gauge Valves
KF Needle & Gauge Valves Superior Fluid Control Products KF O-Ring & Packed Stem Style Needle Valves KF Needle Valves combine rugged construction, dependability and leak-free performance at high and low
More informationVe-Lock manufactures Needle Valves from Solid bar stock Materials & all parts details are as below:
Needle Valves : - Needle valves have a slender, tapered point at the end of the valve stem that is lowered through the seat to restrict or block flow. Fluid flowing through the Needle valve turns 90 degrees
More informationball valves Flomite 71 Series 2-way Integral Panel Mount Ball Valves
2-way Integral Panel Mount Ball Valves Used for quick on-off service with a visual indication of flow, HOKE s 2-way ball valves offer orifice sizes up to 0.25 (6.4mm). Flomite valves feature a floating
More informationModel 111 Mass Flow Instruments
111 Mass Instruments Porter Mass products reflect over four decades of experience in the design and manufacture of precision instruments for the measurement and control of gas flow. They incorporate design
More informationNeedle Valves. Needle Valves Part Matrix. Flow Coefficient (C v ) belgas.net < 129 >
Needle Valves BelGAS Standard Needle Valves offer four choices in 316 stainless steel as well as one piece forged carbon plated steel; soft seat and hard seat, angle and globe styles. The Mini Valve offers
More informationBall Valves (HB Series) Catalog 4121-HB Revised, April 2005
Ball Valves (HB Series) Revised, April 2005 Introduction Parker High Pressure HB4 Series Ball Valves provide reliable shut-off or switching functions. The upper and lower trunnion bearings enhance the
More informationPipe Valves, Fittings and Nipples Pressures to 15,200 psi
Pipe Valves, Fittings and Nipples MAXIMATOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality and reliability, backed by
More informationMultipurpose Ball Valves
www.swagelok.com Multipurpose Ball Valves 33 Series Working pressures up to 6000 psig (413 bar) High flow capacity in a compact design Available with PEEK and UHMWPE seats Variety of end connections Low
More informationIntegral-Bonnet Needle Valves
www.swagelok.com Integral-Bonnet Needle Valves O, 1, 18, 20, and 26 Series Live-loaded packing system Compact design Working pressures up to 6000 psig (413 bar) Temperatures up to 600 F (315 C) 2 Integral-Bonnet
More informationHM Series - DBB. Single, Double Block & Bleed Valves. Continuously Improving Flow Control
HM Series - DBB Single, Double Block & Bleed Valves INDEX / USER RESPONSIBILITY Index Technical Specifications... 3 How To Order / Optional Extras... 5, 9, 12, 14 Hand Valves... 4 Gauge Valves... 6 Model
More informationSubmersion/Insertion Toroidal Sensor
Instruction Sheet PN 51A-228/rev.P December 2010 Model 228 Submersion/Insertion Toroidal Sensor For additional information, please visit our website at www.emersonprocess.com/raihome/liquid/. CAUTION SENSOR/PROCESS
More informationSevere-Ser vice Union-Bonnet Needle Valves
www.swagelok.com Severe-Ser vice Union-onnet Needle Valves N Series and N Series Working pressures up to 10 000 psig (689 bar) Temperatures from 65 to 450 F ( 53 to 232 C) with PTFE packing; up to 1200
More informationMass Flow Meters & Controllers
HFM-D-3A & 305A Mass Flow Meters HFC-D-3A & 307A Mass Flow Controllers FEATURES Range 0-25 slm to 0-2500 slm (N 2 Equivalent) Excellent Accuracy ±(0.5% of Reading + 0.2% of Full Scale) 0-5 VDC or 4-20
More informationBlock and Bleed Gauge Valves M25 and M251
Product Overview The M25 and M251 are two-valve single outlet gauge valves that combine isolating, calibrating, and venting facilities in a single compact unit. These valves enable gauges, pressure transmitters,
More informationAUTOMATIC CHANGEOVER MANIFOLD Series 915
AUTOMATIC CHANGEOVER MANIFOLD Series 915 FEATURES Fully automatic, simple, hassle-free operation No variance in delivery pressure Designed for ultra high purity gas service Built-in audio and visual alarm
More informationVeriflo Pressure Regulators
Hydraulik - Pneumatik Steffen Haupt Moritzer Straße 35 01589 Riesa Telefon: 03525 6801-0 Telefax: 03525 680120 info@haupt-hydraulik.de Veriflo Pressure Regulators 4511 November 2003 KATALOG Vertrieb: Frau
More informationHose and Tube Fittings Series 1-3
Embracing Challenge Hose and Tube Fittings Series 1-3 out of plastics PP, PVDF, PTFE Series 1 Special Features Corrosion resistant Gas tight Easy to handle Different connection threads Application Hose
More informationCompact, High-Flow Gas Regulators
www.swagelok.com Compact, High-Flow Gas Regulators HF Series Precise pressure control Tamper-free design High-purity design Preset and adjustable dome-loaded models 2 Compact, High-Flow Gas Regulators
More informationStainless Steel Valves For the Sanitary Industries
www.swagelok.com Stainless Steel Valves For the Sanitary Industries Sanitary ball valves Manual and pneumatically actuated butterfly valves Disk and ball check valves ir blow check valves ir relief valves
More informationANDERSON GREENWOOD. Hand Valves and Accessories INSTRUMENTATION PRODUCTS. Soft Seated Valves Hard Seated Valves Mini Valves
ANDERSON GREENWOOD INSTRUMENTATION PRODUCTS Hand Valves and Accessories Soft Seated Valves Hard Seated Valves Mini Valves Anderson Greenwood is the industry leader in instrument valve technology and the
More informationHigh Pressure Equipment High Pressure Valves, Fittings and Tubing
igh quipment igh Valves, ittings and Tubing 0,000, 40,000 and psi service igh quipment Company has developed a line of igh products to assure safe and easy plumbing for 0,000, 40,000 and psi. These needle
More informationNeedle Valves. Needle Valves Part Matrix. Flow Coefficient (C v ) belgas.net < 129 >
Needle Valves elgs Standard Needle Valves offer four choices in 316 stainless steel as well as one piece forged carbon plated steel; soft seat and hard seat, angle and globe styles. The Mini Valve offers
More informationNon-Code Liquid Relief, ASME Section VIII, Air/Gas and Steam, National Board Certified, Safety and Relief Valves
Non-Code Liquid Relief, ASME Section VIII, Air/Gas and Steam, National Board Certified, Safety and Relief Valves Features Top guided design offers high capacity with 0.110 in 2 [0.710 cm 2 ] orifice area.
More informationRated Burst Pressure 200 Series: 2.5 : 1 H200 Series: 4 : 1
200 Series 0 to 3000 psig heck Valves H200 Series 0 to 6000 psig heck Valves Features & enefits Quick opening/positive closing Provides a wide range of adaptability Large flow capacity The patented sealing
More informationScraper Passage Indicator. Electrical Indicator. Features
IV Scraper Passage Indicator Bulletin No: 5110.001.03 Date: June 2008 Cross Indexing No: n/a Supersedes: 5110.001.02 (1/06) Flag Indicator Electrical Indicator Options Description TDW s IV Scraper Passage
More informationDouble-Headed Screw 1. 3/4" FIP x 3/4" MIP x 1/4" hole 2. 3/4" Fip x 3/4" MIP. Feed Water Connector 1. 1/2" FIP x 1/2" MIP x 1/4" OD 2. 3.
Picture Item No. Description RO- 0010 Brass Water Feed 1. 3/4" FIP with 1/4" hole 2. Using on R.O. tank RO- O020 Double-Headed Screw 1. 3/4" FIP x 3/4" MIP x 1/4" hole 2. 3/4" Fip x 3/4" MIP RO- 0030 Brass
More informationInstallation Instructions
Installation Instructions S50-310 (Semi-Circular) S50-311 (Circular) Accu-Zone Infrared Control Conversion Kit for Terrazzo & Stainless Steel Classic Washfountains (Non-sectional) Table of Contents Pre-Installation
More informationFlare Fittings. The World Standard. SAE 45 Flared Fittings... D4. Inverted Flared Fittings... D14. Access Valves... D18
Flare Fittings SAE 45 Flared Fittings... 4 Inverted Flared Fittings... 14 Access Valves... 18 The World Standard Flare Fittings Flare to ale PT 48F ale Connector 481FH ale Connector AVU1 ale Connector
More informationBaumann 87000 Flexsleev Sanitary Control Valve
Product Bulletin D103345X012 Baumann 87000 Flexsleev Sanitary Control Valve The Baumann 87000 control valve (figures 1 and 2) is excellent for throttling high purity liquid or gaseous media commonly found
More information2 WAY (2/2) AND 3 WAY (3/2) BRASS AND STAINLESS STEEL SOLENOID VALVES
2 WAY (2/2) AND 3 WAY (3/2) BRASS AND STAINLESS STEEL SOLENOID VALVES DIRECT ACTING Brochure N-289 SPECIFICATIONS Port Size: 1/8 and1/4 Solenoid Valve for air, oil, water and other fluids Flow Direction:
More informationCRANE. Σελίδα 1 από 2. Dimensions and Weights. Weight (kg) Size
CRANE Σελίδα από 2 DM93 Variable Orifice Double Regulating Valve PN6 Cast Iron Balancing Valve (VODRV), Flanged to BSEN 92-2 The DM93 variable orifice double regulating valves will give satisfactory performance
More informationAIR LINE VALVES AND GAUGES
AIR LINE VALVES AND GAUGES INGERSOLL-RAND AIR LINE VALVES AND GAUGES Maintaining consistent air pressure throughout the entire system is crucial for maximum performance and productivity. Ingersoll-Rand
More informationSevere-Service Union-Bonnet Needle Valves
www.swagelok.com Severe-Service Union-Bonnet Needle Valves N Series and HN Series Working pressures up to 10 000 psig (689 bar) Temperatures from 65 to 450 F ( 53 to 232 C) with PTFE packing; up to 1200
More informationCajon VCR Fittings. Flanges, Fittings, & Components. Cajon & Swagelok Fittings. Cajon VCR Fittings. Nuts, Caps, & Plugs. Socket Weld Glands
Cajon VCR Fittings Cajon VCR Fittings Make excellent low-pressure gas connections Ideal for lecture bottle gas cylinders, standard helium checks, and general gas plumbing Withstand bakeout to 58º C (with
More informationCheck Valves & Actuated Valves
heck Valves & ctuated Valves & U Series Piston non-return valves rated 6,000 psi & 10,000 psi X Series Piston non-return valves rated 20,000 psi Pneumatic ctuators Pneumatically actuated valves Electric
More informationSTC 3S012-020-A Series Solenoid Valves
STC 3S012-020-A Series Solenoid Valves 3S012-020-A Series Solenoid Valve Specifications Valve Model 3S012-1/8-A 3S012-1/4-A 3S020-1/8-A 3S020-1/4-A Port Size (NPT) 1/8 1/4 1/8 1/4 Valve Type Action 3 Way,
More informationNeedle Valves. NB, NBH, ND, NDH, NF, NFH, NG, NGH, NR, NRG, NT, NU, NUH, NY and NYH Series. www.fitokgroup.com
Needle Valves NB, NBH, N, NH, NF, NFH, NG, NGH, NR, NRG, NT, NU, NUH, NY and NYH Series www.fitokgroup.com ontents Bar Stock Needle Valves NB Series and NBH Series Nonrotating-stem Needle Valves N Series
More information8D.1 BALL ANGLE METER VALVES - 3/4" & 1" P-24258 B-24258 E-24259 B-24259 B-24266 B-24267
BALL ANGLE METER VALVES - 3/4" & " 8D. B-24258 MUELLER 300 Ball Angle Meter Valve MUELLER 0 Conductive Compression Connection for CTS O.D.* tubing x meter swivel nut** adding -3 suffix to catalog number.
More informationTypical Aluminum GFM Mass Flow Meter
MASS FLOW METERS Design Features n Rigid metallic construction. n Maximum pressure of 1000 psig (70 bars). n Leak integrity 1 x 10-9 of helium. n NIST traceable certification. n Built-in tiltable LCD readout.
More informationProduct Manual. CVS Type 67AFR Filter Regulator. Introduction. Installation. Description
Product Manual CVS Type 67AFR Filter Regulator Introduction This CVS Controls product manual includes instructions for the installation, adjustment, maintenance and parts ordering of the CVS Type 67AFR
More informationRAPID RESPONSE Model RSV-1 Residential Shut-Off Valve, 1 Inch and 2 Inch (DN25 and DN50) for Dual-Purpose Residential Water Supply General Description
Worldwide Contacts www.tyco-fire.com RAPID RESPONSE Model RSV-1 Residential Shut-Off Valve, 1 Inch and 2 Inch (DN25 and DN50) for Dual-Purpose Residential Water Supply General Description The TYCO RAPID
More informationProportional Relief Valves
www.swagelok.com Proportional Relief Valves R Series Liquid or gas service Set pressures from 10 to psig (0.7 to 413 bar) 1/4 and 1/2 in. and 6 to 12 mm end connections 2 Proportional Relief Valves Spring
More informationStainless Steel Single and Dual Circulation Kits
Instruction Sheet P/N 160780 01 Stainless Steel Single and Dual Circulation Kits Introduction The single and dual high-pressure circulation kits allow you to vary and control the circulation rate of coating
More informationMTI10 Insertion and MTL10 In-line Thermal Mass Flowmeter and Temperature Transmitter
Thermal Mass meter and Temperature Transmitter Description The MTI10 insertion thermal mass flowmeter and the MTL10 in-line thermal mass flowmeter provide accurate mass flow measurement of clean, dry gases
More informationOcean Engineering Technical Data Sheet Stuffing Tubes
Ocean Engineering Technical Data Sheet Stuffing Tubes Stuffing tubes are devices used to allow a wire or cable to pass through a wall or bulkhead and protect components from the outside environment. Many
More informationConfidential. Proportional reducer D386 ATEX. Male base connector View from weld side
Proportional reducer D386 ATEX Classification according Article 3.3 of European Directive n 97/23/CE from 29/05/1997 Classification according group II, category 2 and temperature class T4 of ATEX Directive
More informationVSO MAX HP High Flow Proportional Valve
VSO MAX HP High Flow Proportional Valve Typical Applications Ventilators Insufflators Anesthesia Delivery & Monitors Pressure & Flow Control Mass Flow Control Product Specifications Physical Properties
More informationPORTER MASS FLOW MEASUREMENT AND CONTROL SYSTEMS
PORTER MASS MEASUREMENT AND CONTROL SYSTEMS PORTER: THE STANDARD OF EXCELLENCE IN MASS Porter Mass Flow products reflect nearly three decades of experience in the design and manufacture of precision instruments
More informationQuick Connect. RTDs, Cordsets and Transmitter with M12 Connections
Quick Connect RTDs, Cordsets and Transmitter with M12 Connections 1 Temperature Measurement Experts Since 1960, urns Engineering has been an industry leader in the design and manufacture of temperature
More informationHigh Pressure Equipment Pressure Vessels and Reactors Index
Pressure Vessels and Reacrs High Pressure Equipment Company designs and manufactures a broad range of pressure vessels and reacrs for both bench-scale and pilot plant applications. We have over 0 standard
More information37 JIC Flare (Nuts) 304C (070112) 306 (070118) 318 (070110) Pg. 22-75-160 Bulkhead Locknut (Use with #2700) Pg. 23 Tube Nut (Use with #319)
37 JIC Flare (Nuts) Components Assembled The 37 JIC (Joint Industrial Council) Flare is a reliable, straight thread, single-flare design that is used world-wide. It is popular in many applications and
More informationGAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES
GAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES CONTINENTAL INDUSTRIES ABOUT US THE ULTIMATE CONNECTION Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and is today
More informationKämmer Series 185000 Laboratory Valves
flowserve.com Kämmer Series 185000 Laboratory Valves Description Kämmer microflow series 185000 / 285000 and 187000 / 287000 are ½" laboratory valves designed for precision controlling. The bodies in stainless
More informationINDICATOR POST STYLE 2945 A TELESCOPING BARREL ASSEMBLY UL AND FM APPROVED
INDICATOR POST STYLE 2945 A TELESCOPING BARREL ASSEMBLY UL AND FM APPROVED Available in Sizes B C D E See Page 6 for Dimensions Kennedy Valve/Indicator Posts 17-1 INDICATOR POST STYLE 2945 A TELESCOPING
More informationSubmersion/Insertion Toroidal Sensor
Instruction Manual 228 Sensor LIQ_MAN_ABR_228 May 2014 PN 51A-228 Submersion/Insertion Toroidal Sensor For additional information, please visit our website at www.rosemountanalytical.com CAUTION SENSOR/PROCESS
More informationMany Products...One Source
PRESSURE GAUGES Dedicated Sales Rep for Your Area 97%Fill Rate Shipping within 24 Hours State of the Art Warehouse System Technical Support Quality Control Program 25 Whaley Avenue Milverton, Ontario N0K
More informationFittings, Tubing & Nipples
s, Tubing & Nipples P Series Pipe s s to 15,000 psi (1034 bar) Since 1945 Parker utoclave Engineers has designed and built premium quality valves, fittings and tubing. This commitment to engineering and
More informationComplete Systems & Parts Automatic Oiler & Grease Bank
MADE IN THE USA Complete Systems & Parts Automatic Oiler & Grease Bank www.gosuburban.com 2 Lubrication Systems Lubrication Systems, a division of Suburban Manufacturing, manufactures a complete line of
More informationValves, Automation & Controls. series 84 /99 HIGH PERFORMANCE 3-PIECE BALL VALVE REDUCE & FULL PORT, STANDARD & FIRE SAFE. www.sharpevalves.
Valves, Automation & Controls series 8 /99 & FS8 /FS99 HIGH PERFORMANCE -PIECE BALL VALVE REDUCE & FULL PORT, STANDARD & FIRE SAFE www.sharpevalves.com Design & Features SHARPE VALVES - SERIES 8/99 Fire
More informationBaumann 24003 3 Way Bronze or Stainless Steel Control Valve
Product Bulletin D1039X012 24003 Valve Baumann 24003 3 Way Bronze or Stainless Steel Control Valve 3 Way Rugged Industrial Control Valve For Mixing and Diverting Applications The Baumann 24003 3 way control
More informationTABLE 1. Rugged cast aluminum alloy casing,celcon waterways with nichrome parts White (unless stainless steel housing)
CHRONOMITE INSTANT-FLOW MICRO WATER HEATER INSTALLATION AND OPERATION INSTRUCTIONS - (LOW FLOW MODELS) (Before installation, compare electrical needed for the model of heater selected) TABLE 1 Model No.
More informationSOLENOID VALVES AND PNEUMATIC VALVES
2 A S E R I E S Catalogue 2005-2006 Directly operated solenoid valves Series A 2/2 way, 3/2 way monostable, bistable (with magnetic memory) Ports M5,, cartridge ø4 The Series A solenoid valves are of the
More informationMini USB and USB 2.0-IP67 Connector System
Mini USB and USB 2.0-IP67 Connector System Section 12 Mini USB and USB 2.0-IP67 Connector System CONEC has added the Mini-USB connector. This Mini-USB IP67 receptacle and plug family, feature a bayonet
More informationSide-Trak 830/840. Process Gas Mass Flow Meters and Controllers. www.sierrainstruments.com
Process Gas Mass Flow Meters and Controllers Features n Direct monitoring of mass flow eliminates need for ancillary pressure and temperature sensing n Patented straight sensor tube with access ports permits
More informationIndex 11.1. Page. Pumping Systems...11.2-11.4 Intensifiers...11.5 Gas Boosters...11.6-11.7 High Pressure Generators...11.8-11.9
Pumping Systems, Intensifiers, Gas Boosters and High Pressure Generators High Pressure Equipment Company produces a number of components and systems for general industrial, elevated pressure applications.
More informationAeroquip Series 1800 & 1801 Low Profile Ratchet Lock Couplings. Lightweight Self-Sealing Compact Design Minimum Pressure Loss
Aeroquip Series 1800 & 1801 Low Profile Ratchet Lock s Lightweight Self-Sealing Compact Design Minimum Pressure Loss Aeroquip Low Profile Ratchet Lock s, Caps and Plugs 1800 and 1801 Series Lightweight,
More informationrelief valves 500 Series Adjustable Popoff & Inline Relief Valves 0.5 to 150 psig (10 bar)
Adjustable Popoff & Inline Relief Valves 0.5 to 150 psig (10 bar) How it Works Closed Resilient seal design prevents leakage. Sealing efficiency increase with increased pressure up to cracking pressure.
More informationRegulator Options and Accessories
Regulator Options and Accessories Regulator accessories are available separately or mounted on Swagelok regulators. Some accessories limit regulator pressure or temperature ratings. Additional materials,
More informationNeedle Valves. Needle Valves - High Pressure. 30SC, 43SC, 30VM, 40VM, 60VM, 100VM & 150V Series. High Pressure. Pressures to 150,000 psi (10342 bar)
Needle Valves High Pressure 30S, 43S, 30V, 40V, 60V, 00V & 50V Series Pressures to 50,000 psi (0342 bar) Since 945, utoclave ngineers has designed and built premium quality valves, fittings and tubing.
More informationREGULATORS 175/153 Series
175/153 Series 175 HEATING 153 COOLING Watson McDaniel reserves the right to change the designs and/or materials of its products without notice. 2002 Watson McDaniel Company Revised 7/2002 175 / 153 Screwed
More informationPRESSURE REDUCING CONTROL VALVE
Schematics Throttles to reduce high upstream pressure to constant lower downstream pressure Low Flow By-Pass controls at low flows 4 PRESSURE REDUCING CONTROL VALVE with LOW FLOW BY-PASS FEATURE Main Line
More informationPipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).
Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)
More informationM A N U A L 13-10-05
Documentation The following information sheets illustrate the description below: 12-WW01-4G-E Sectional view of the lance with main dimensions 12-W101-6G-E Sectional view of the head of the lance with
More informationCopper Meter Insetters
Copper Meter Insetters To Set 5/8", 5/8" x 3/4", 3/4", & 1" Water Meters 1/1 Table of Contents Page Insetter Numbering System... 3 Meter Insetters 5/8", 5/8" x 3/4", 3/4", & 1" Series 740 "C" Style...45
More informationAPI Flanged Safety Relief Valves Series 526 CATALOG
API Flanged Safety Relief Valves Series 26 CATALOG The-Safety-Valve.com 1 Valve finder How to find the right product group High operating to set pressure ratio, high backpressure or low total height? Yes
More informationFlow Sensors. Convenient, Reliable and Economical Flow Measurement. THORNTON Leading Pure Water Analytics
THORTO Leading Pure Water nalytics Economical Paddlewheel Hi-Purity PF Ultrasonic Vortex Insertion-type Vortex Convenient, Reliable and Economical Flow Measurement Paddlewheel Reliable and Economical Inline
More informationCopper Meter Resetters
Copper Meter Resetters To Set 5/8", 5/8" x 3/4", 3/4", 1", 1 1 2" & 2" Water Meters 11/12 Table of Contents Page Page Meter Resetters 5/8", 5/8" x 3/4", 3/4", & 1" Horizontal Inlet and Outlet Series 710
More informationAir Conditioning & Refrigeration Master Catalog. Catalog CIC-2003-1/USA April 2003
Air Conditioning & Refrigeration Master Catalog Catalog CIC-2003-1/USA April 2003 Table of Contents Table of Contents Service Valves Frontseating Valves... page 115 RB01 Series Ball Valves... page 117
More informationPVM Piston Pumps Service Manual
PVM Piston Pumps Service Manual PVM018/020 PVM045/050 PVM057/063 PVM074/081 PVM098/106 PVM131/141 Table of Contents Service Parts Pump Description... 3 Basic pump Pump Operation Controls Types Part Identification...
More information2/2 and 3/2 Way Size 6 Seat Valves
2/2 and 3/2 Way Size 6 Seat Valves Directly operated Interface and subplate dimensions according to DIN 24340 and ISO Line connection port size G 3/8" Cartridge design PN [p max. ] = 315 bar 7501856.06.12.08
More information167D Series Switching Valves
June 2011 167D Series Switching Valves P1185 P1184 167D TWO-WAY SWITCHING VALVE 167DA THREE-WAY SWITCHING VALVE Figure 1. 167D Series Switching Valves Introduction The 167D Series switching valves are
More informationThreaded Resistance Thermometers Model TR10-D, Miniature Design
Electrical Temperature Measurement Threaded Resistance Thermometers Model TR10-D, Miniature Design WIKA Data Sheet TE 60.04 Applications Machine building, plant and tank construction Power transmission
More informationBROEN UNiFlEx FiTTiNgs FOR BURNiNg gases OEN OEN ifl ifl FOR FOR BURN BURN gas gas
BROEN UNIFLEX Fittings FOR BURNIN ASES BROEN UniFlex TM Fittings for burning gases BROEN UniFlex TM Fittings for burning gases LAB Table of Contents Content Page Table of Content 2 Product Overview 3 BROEN
More informationInstallation Instructions 6028.801
DAZZLE Installation Instructions 08.80 Spread Lavatory Faucet with Speed Connect Drain* Congratulations on purchasing your American Standard faucet with Speed Connect drain, a feature found only on American
More informationVersion: 1.0 TWO HANDLES INWALL WATERFALL FAUCET INSTALL GUIDE
MODEL: S1248CW Version: 1.0 TWO HANDLES INWALL WATERFALL FAUCET INSTALL GUIDE Dear Valued Customer, SUMERAIN would like to take this opportunity to thank you for purchasing SUMERAIN products. It is our
More informationSolenoid valves 2/2-way direct-operated Type EV210A
Solenoid valves 2/2-way direct-operated Type EV210A Features EV210A NC and NO Very compact valves for industrial application, such as control and dosage For water, oil, compressed air and similar neutral
More informationMustang Series PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE. M115-2 (Globe) M1115-2 (Angle) Schematic. Standard Components
Schematic Throttles to reduce high upstream pressure to constant lower downstream pressure Throttles to maintain minimum upstream pressure PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE
More informationTN2000 Series Pneumatic Piston Actuators for DN125 to DN300 SPIRA-TROL Series Control Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationMDT5N25 & MTD5N40 SERVICE PARTS
MDTN & MTDN0 SERVICE PARTS This parts list contains the service parts and wiring diagrams for this model. Check the model number of the machine requiring the parts to be sure that this is the correct parts
More informationVCR Metal Gasket Face Seal Fittings
www.swagelok.com Metal Gasket Face Seal Fittings 1/16 to 1 in. and 6 to 18 mm sizes High-purity stainless steels The original design, the authentic brand 2 Metal Gasket Face Seal Fittings ontents Typical
More informationOPERATING and MAINTENANCE MANUAL SERIES 2700A CONTROL VALVE CONTENTS. INTRODUCTION...1 Scope...1 Description...1 Valve Identification...
OPERATING and MAINTENANCE MANUAL SERIES 2700A CONTROL VALVE CONTENTS INTRODUCTION...1 Scope...1 Description...1 Valve Identification...2 1.0 VALVE INSTALLATION...2 2.0 VALVE MAINTENANCE...3 Actuator Disassembly...3
More informationV47 Series Temperature Actuated Modulating Water Valves
V47 Series Temperature Actuated Modulating Water Valves Master Catalog 125 Valves, Miscellaneous (Other Than Gas) Section V Product Bulletin V47 Issue Date 0286 Application The V47 modulating valves regulate
More information14 PHOENIX CONTACT Courtesy of Power/mation. 1310 Energy Lane, Saint Paul, MN 55108. info@powermation.com - 800-843-9859 - www.powermation.
14 PHOENIX CONTACT PLUSCON circular is a circular connector for use in industrial automation. The range of design sizes available is varied, starting with the design sizes M5 to M8 and M1, for sensor/actuator
More informationOEM-EP Pressure Controllers
Pressure Controllers Typical Applications Carrier Gas Pressure Control Air over Liquid Control Mass Spectrometer Process Gas Supply Pressure Control Miniature ler The Miniature ler converts a variable
More informationFull Technical Catalog For Closed-loop Sampling System
Full Technical Catalog For Closed-loop Sampling System Full Technical Catalog For Closed-loop Sampling System FITOK Group FITOK GmbH (Headquarter) Sprendlinger Landstr. 115, 63069 Offenbach am Main, Germany
More informationGas Mass Flow Control Products
Gas Mass Flow Control Products The Standard of Excellence in Mass Flow Porter Mass Flow products reflect over four decades of experience in the design and manufacture of precision instruments for the measurement
More informationTECHNICAL ASSISTANCE TOLL FREE TELEPHONE NUMBER 1.800.591.9360 TECHNICAL ASSISTANCE FAX: 1.626.855.4894
ACORN SAFETY P.O. BOX 3527 CITY OF INDUSTRY, CA 9744-0527 UNITED STATES OF AMERICA WWW.ACORNSAFETY.COM INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS FREEZE RESISTANT WALL MOUNTED EMERGENCY EYEWASH
More informationKEYSTONE. Stainless steel hygienic butterfly valves F250 for imperial tubing F251 for metric tubing
KEYSTONE Stainless steel hygienic butterfly valves F0 for imperial tubing F for metric tubing Features Keystone technology. Quarter turn operation. Isolation or regulation control. Equal percentage characteristics.
More informationFloat and Thermostatic Traps Series H, C and X
Hoffman Specialty Installation & Maintenance Instructions HS-(E) and Thermostatic Traps Series H, C and X Series C & NPT Series C NPT Series X NPT Series C NPT Series H Ratings Maximum Max. Operating NPT
More information