Indicators Series FPC

Transcription

1 Indicators Series FP Max 40 bar Global Filtration Technology

2 FP TYPIAL APPLIATIONS Industrial Equipment Mobile Equipment Marine/Offshore Applications ompetitor Housing The FP range of filter condition indicators, are designed for use on a wide range of Parker filters and suitable for competitive interchange (consult Parker Filtration for details). Ideal for giving accurate visual, electronic or electrical feedback of filter element condition, in order to facilitate effective maintenance and ensuring hydraulic systems, Marine/Mobile or Industrial are protected from particulate contamination. SPEIFIATION Maximum Operating Pressure: 40 bar (50 bar for aluminium) Maximum ifferential Pressure: bar Working Temperature Range: -0 to +85 Material of Housing : rass, aluminium or stainless steel Seals: NR (Nitrile) or FPM (Fluoroelastomer) The differential pressure values of standard indicator models: ± bar ± bar ± 0..5 bar ± bar ± bar ± bar ± 0.5 (Indicators for other differential pressure values are optional) FP p Indicators are typically used with the following filters: On-line low and medium pressure filters: 87, 88, 89, 9, 97, 11 and 197. These filter types require FP-adaptor for connecting indicator to the filter. Marine filters: 00, 05, 040, 045, 060, 065, 070, 1 and 50. Types: 05, 040, 045 and 060 require FP-lock for connecting indicator to the filter. Medium pressure filters series: 1145 and 0. High pressure filters series: 5000, 70, 700 and High pressure filters without bypass valve.(7000 and 70 series) Medium and low pressure filter series; Note for P Range only.5 bar indicators are available N, P, 40RF, 50RF, IL8, 1M, 16P, 6P, 6P High pressure filters 8 series, FA, F FP Pressure Indicators are typically used with the following filters: G1/8 On-line return filter series: 00 and 50. Tanktop return filter series: 14, 5, 0, 70, 90, 95 and 11. W W6 1.5 bar.5 bar 7.0 bar 1. and.5 bar.5 and 5.0 bar 186

3 IFFERENTIAL PRESSURE INIATORS FP T ELETRIAL Model Rotating part 60 ontact onfiguration MOEL P1-P Filter Indicators FP OM Indication (N.O) Normally losed (N.) No onnect Plastic O-ring 16.0x.0 P1 High pressure Fixed part A W W6 A Ø16. Ø19.78 Ø18.8 ±0.05 ± 0.06 ± 0.06 /4*-16 7/8-14 7/8-14 UNF-A UNF-A UNF-A Pin 1 O-ring 1.1x1.6 P Low pressure Electrical connector IN 4650 W Model W6 Model Overvoltage category II (EN6-1) ontact onfiguration W & W6 P1-P Low Pressure High Pressure No onnect OM Normally losed (N.) Pin 1 Normally Open (N.O) Rated voltage 15VA 50VA 8V 15V 50V Non-inductive load (A) Resistive Lamp load load N.. N.O. N.. N.O Inductive load (A) Inductive load Motor load N.. N.O. N.. N.O Inrush current (A) N.. N.O. 0 max. max. FP V & R VISUAL Red colour visible when indicator on O-ring 16.0x.0 High pressure O-ring 1.1x1.6 Low pressure Model ø /4-16 UNF-A FP R Visual imensions as FPV ( Model) Red button pops up (Manual Reset) Red colour visible when indicator on x.46 Low pressure 17 x 1.5 High pressure W Model 60 W6 Model x x ø ø /8-14UNF - A Note: W & W6 (FPV ONLY) Auto Reset 7/8-14UNF - A 187

4 FP ELETRONI IFFERENTIAL PRESSURE INIATORS FP F ELETRONI ontact onfiguration Model Rotating part 60 NPN PNP FP.F NPN 1 Normally open (N.O) 4 max 00 ma +V +...6V 0V -...6V Green LE Yellow LE s Red LE Fixed part A W W6 A Ø16. Ø19.78 Ø18.8 ±0.05 ± 0.06 ± 0.06 /4*-16 7/8-14 7/8-14 UNF-A UNF-A UNF-A FP.F PNP 1 +V +...6V O-ring 16.0x.0 High pressure Normally open (N.O) 4 max 00 ma O-ring 1.0x1.6 0V Low pressure -...6V elow temp +0 only green LE is active regardless of the differential pressure level. above temperature +0 : W Model W6 Model Ind. press. LE status Output /4 /4 4/4 active 1 active Low Pressure High Pressure (Indicators for other diff. pressure values are optional) Electrical connector IN 4650 Input supply voltage + to6 V Indication output 00 ma/6 V Output type: (N.O) Normally Open NPN or PNP Note: o not connect output terminals 1 or directly (without load) to power supply terminals, because this will damage the equipment. 188

5 FP PRESSURE INIATORS FP M VISUAL (GAUGE) Ø40 Green Area Normal Red Area hange the Filter Element 0.9AR 1.6AR 4 HEX 14 G 1 /8.5AR FP H ELETRIAL (48V A/) 1 ontact configuration 67 ø0 HEX 4 TEHNIAL SPEIFIATIONS Max.operating pressure 80 bar Working temperature range -5º...+80º (º) Material of housing rass Thread G 1 /8K Indicating pressure +/-0.15 (Indicators for other diff. pressure values are optional) Max. operating voltage 48v A/ urrent 0.5A (resistive) 0.A (inductive) TYPE Normally open (NO) Normally closed (N) G 1 /8K ORER UT118 UT119 FP G ELETRIAL (50 VA) 8 TEHNIAL SPEIFIATIONS Max.operating pressure 150 bar Max. fluid temperature 0 Material of housing Passivated steel Thread G 1 /8 K 0x0 Indicating pressure +/-0.15 (Indicators for other diff. pressure values are optional) Max. operating voltage 50 VA 44 NO 1N 74 urrent.0a (resistive) 0.5A (inductive) 56 ontact configuration HEX 7 G 1 /8K Fixed part NO 1 N 189

6 FP F/U/T/V/R/G/H/M ORERING INFORMATION Table 1 Table Table Table 4 Table 5 FP Table 6 Table 1 Table Table Indicator Type Indicating Pressure Seal Type Indicator Options Indicating Pressure Options Seal Material Options Electronic p indicator F Nitrile Eletrical p indicator T 1. bar 1 Fluoroelastomer V Visual p indicator (auto reset) V 1.5 bar 15 G, H, M always without seal X Visual p indicator (manual reset) R.5 bar 5 Pressure switch 50V G 5.0 bar 50 Pressure switch 48V H 7.0 bar 70 Pressure gauge M 8.5 bar 85 Other indicating pressures available. Table 4 Table 5 Table 6 onnection Material Model Indicator onnection Material Options rass Aluminium Stainless steel NOTE: Standard materials brass, W Aluminium, W6 rass. FP.M and H always rass, FP. G always steel M A R Thread onfiguration /4-16UNF- used in Parker Finn-Filter housing 7 /8-14 UNF-A used in Parker medium pressure housing 7 /8-14 UNF-A used in Parker high pressure housing W W6 FP H Indicator Only Normally open Normally closed FP F Indicator Only Output type NPN Output type PNP NO N NPN PNP 190