SM712 Series 600W Asymmetrical TVS Diode Array
|
|
|
- Buddy Tucker
- 9 years ago
- Views:
Transcription
1 SM712 Series 6W Asymmetrical TVS Diode Array RoHS Pb GREEN Description The SM712 TVS Diode Array is designed to protect RS-485 applications with asymmetrical working voltages (-7V to from damage due to electrostatic discharge (ESD, electrical fast transients (EFT, and lightning induced surges. The SM712 can absorb repetitive ESD strikes above the maximum level specified in the IEC international standard without performance degradation and safely dissipate up to 19A of 8/2us induced surge current (IEC with very low clamping voltages. Pinout and Functional Block Diagram Features 2 7V 7V 1 ESD, IEC61-4-2, ±3kV contact, ±3kV air EFT, IEC61-4-4, 5A (5/5ns Lightning, IEC61-4-5, 19A (t P =8/2μs Working Voltages: -7V to Low clamping voltage Low leakage current AEC-Q11 Qualified Life Support Note: Not Intended for Use in Life Support or Life Saving Applications The products shown herein are not designed for use in life sustaining or life saving applications unless otherwise expressly indicated. 3 Applications RS-485 Fieldbus Modbus Profibus DMX512 RS-485 Application Example Security Systems Automated Teller Machines (ATMs Automation Equipments Communication Equipments RS-485 Port Receiver A B IC SM712 GND 214 Littelfuse, Inc. Revised: 6/9/14
2 Absolute Maximum Ratings Symbol Parameter Value Units P Pk Peak Pulse Power (t p =8/2μs 6 W Peak Pulse Current (t p =8/2μs 19 A T OP Operating Temperature -4 to 125 C T STOR Storage Temperature -55 to 15 C Notes: CAUTION: Stresses above those listed in Absolute Maximum Ratings may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Thermal Information Parameter Rating Units Storage Temperature Range -55 to 15 C Maximum Junction Temperature 15 C Maximum Lead Temperature (Soldering 2-4s 26 C SM712 Electrical Characteristics (T OP =25ºC Parameter Symbol Test Conditions Min Typ Max Units 1μA, Pin3 to Pin1 or Pin2 7. V Reverse Standoff Voltage WM 1μA, Pin1 or Pin2 to Pin3 12. V Reverse Breakdown Voltage =1mA, Pin3 to Pin1 or Pin2 7.5 V =1mA, Pin1 or Pin2 to Pin V =7V 2 μa Leakage Current I LEAK = 1 μa =1A, t p =8/2µs, Pin 1 or Pin 2 to Pin 3 19 V I Clamp Voltage 1 PP =1A, t p =8/2µs, Pin 3 to Pin 1 or Pin 2 11 V V C =19A, t p =8/2µs, Pin 1 or Pin 2 to Pin 3 31 V =19A, t p =8/2µs, Pin 3 to Pin 1 or Pin 2 19 V Dynamic Resistance 1 R DYN (V C2 - V C1 / (2-1.5 Ω ESD Withstand Voltage 1 V ESD IEC (Contact Discharge ±3 kv IEC (Air Discharge ±3 kv Diode Capacitance 1 C I/O-GND Reverse Bias=V, f=1mhz; Pin 1 or Pin2 to Pin 3 75 pf Notes : 1. Parameter is guaranteed by design and/or device characterization. Capacitance vs. Reverse Bias Clamping Voltage vs Capacitance (pf Clamp Voltage (VC Pin 1 or Pin 2 to Pin 3 Pin 3 to Pin1 or Pin Bias Voltage (V Peak Pulse Current-IPP (A 214 Littelfuse, Inc. Revised: 6/9/14
3 Temperature TVS Diode Arrays (SPA Diodes Non-Repetitive Peak Pulse Power vs. Pulse Time Power Derating Curve Peak Pulse Power - P pk (kw Pulse Duration - tp (µs % of Rated Power Ambient Temperature - TA ( o C Pulse Waveform Product Characteristics 11% 1% 9% Lead Plating Lead Material Matte Tin Copper Alloy Percent of 8% 7% 6% 5% 4% 3% 2% 1% % Time (μs Lead Coplanarity Substrate material Body Material.4 inches (.12mm Silicon Molded Epoxy Flammability UL 94 V- Notes : 1. All dimensions are in millimeters 2. Dimensions include solder plating. 3. Dimensions are exclusive of mold flash & metal burr. 4. Blo is facing up for mold and facing down for trim/form, i.e. reverse trim/form. 5. Package surface matte finish VDI Soldering Parameters Reflow Condition - Temperature Min (T s(min 15 C Pb Free assembly T P Ramp-up t P Critical Zone TL to TP Pre Heat - Temperature Max (T s(max 2 C - Time (min to max (t s 6 18 secs Average ramp up rate (Liquidus Temp (T L to peak T S(max to T L - Ramp-up Rate 3 C/second max 3 C/second max T L T S(max T S(min t S Preheat t L Ramp-down Reflow - Temperature (T L (Liquidus 217 C - Temperature (t L 6 15 seconds 25 time to peak temperature Time Peak Temperature (T P 26 +/-5 C Time within 5 C of actual peak Temperature (t p 2 4 seconds Ramp-down Rate 6 C/second max Time 25 C to peak Temperature (T P 8 minutes Max. Do not exceed 26 C 214 Littelfuse, Inc. Revised: 6/9/14
4 Part Marking System Part Numbering System SM H T G 712 TVS Diode Arrays (SPA Diodes Series Working Voltage Number of Channels G= Green T= Tape & Reel Package H: SOT23-3 Ordering Information Part Number Package Marking Min. Order Qty. SM712-2HTG SOT Package Dimensions SOT23-3 C b 3 52B 1 2 e e1 D E1 A1 L1 E A Recommended Pad Layout P M P N Package SOT23-3 Pins 3 JEDEC TO-236 Millimeters Inches Min Max Min Max A A1 M b c D E N E e.95 BSC.38 BSC e1 1.9 BSC.75 BSC L1.54 REF.21 REF M N O.78.3TYP P.78.3TYP 214 Littelfuse, Inc. Revised: 6/9/14
5 Embossed Carrier Tape & Reel Specification SOT23-3 ACCESS HOLE 14.4mm 13mm 18mm 6mm 8mm TAPE AND REEL GENERAL INFORMATION 1. 3 PIECES PER REEL. 2. ORDER IN MULTIPLES OF FULL REELS ONLY. 3. MEETS EIA-481 REVISION "A" SPECIFICATIONS. SOT23-3 (8mm POCKET PITCH Symbol Millimetres Inches Min Max Min Max E F P D P W P A B K t mm USER DIRECTION OF FEED PIN 1 COVER TAPE 214 Littelfuse, Inc. Revised: 6/9/14
SM Series 400W TVS Diode Array
General Purpose ESD Protection - SM5 through SM3 SM Series W TVS Diode Array RoHS Pb GREEN Description The SM series TVS Diode Array is designed to protect sensitive equipment from damage due to electrostatic
SESD Series Ultra Low Capacitance Discrete TVS
SESD Series Ultra Low apacitance Discrete TVS RoHS Pb GREEN ELV Description The SESD Series Ultra Low apacitance Discrete TVS provides unidirectional and bidirectional ESD protection for the world s most
SDC15. TVS Diode Array for ESD Protection of 12V Data and Power Lines. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics
Description The SDC15 transient voltage suppressor (TVS) is designed to protect components which are connected to data and transmission lines from voltage surges caused by electrostatic discharge (ESD),
RClamp0502BA. Ultra-Low Capacitance TVS for ESD and CDE Protection. PROTECTION PRODUCTS - RailClamp Description. Features. Mechanical Characteristics
- RailClamp Description RailClamp TS diodes are specifically designed to protect sensitive components which are connected to high-speed data and transmission lines from overvoltage caused by ESD (electrostatic
uclamp3301h Low Voltage μclamp TM for ESD and CDE Protection PRELIMINARY Features
PROTECTION PRODUCTS -MicroClamp Description The μclamp series of Transient Suppressors (TVS) are designed to replace multilayer varistors (MLVs) in portable applications such as cell phones, notebook computers,
RClamp0504P RailClamp Low Capacitance TVS Array
- RailClamp Description RailClamps are low capacitance TVS arrays designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive components which are connected
LC03-6. Low Capacitance TVS for High-Speed Data Interfaces. Features. Description. Mechanical Characteristics. Applications
Description The LC0- transient voltage suppressor is designed to protect components which are connected to high speed telecommunication lines from voltage surges caused by lightning, electrostatic discharge
How To Test A Sidactor Series For A Power Supply
SDP Series - SOT23-5 RoHS Pb e3 Description This new SIDACtor series is targeted for the tertiary or line driver side protection position for VDSL2+, ADSL2 applications and general I/O protection functions.
SIDACtor Protection Thyristors Baseband Protection (Voice-DS1) SIDACtor Series - TO-92. Description
SIACtor Series - TO-92 RoHS Pb e3 escription SIACtor Series TO-92 are designed to protect baseband equipment such as modems, line cards, CPE and SL from damaging overvoltage transients. The series provides
Gas Discharge Tube (GDT) Products CG5 and SL0902A Series. CG5 and SL0902A Series
Description Agency Approvals AGENCY AGENCY FILE NUMBER E128662 2 Electrode GDT Graphical Symbol Littelfuse Broadband Optimized SL0902A Series offers high surge ratings in a miniature package. Special design
Metal-Oxide Varistors (MOVs) Surface Mount Multilayer Varistors (MLVs) > MLN Series. MLN SurgeArray TM Suppressor. Description
MLN SurgeArray TM Suppressor RoHS Description The MLN SurgeArray Suppressor is designed to help protect components from transient voltages that exist at the circuit board level. This device provides four
SMF05C. TVS Diode Array For ESD and Latch-Up Protection PRELIMINARY. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics
Description The SMF series TVS arrays are designed to protect sensitive electronics from damage or latchup due to ESD and other voltageinduced transient events. They are designed for use in applications
STIEC45-xxAS, STIEC45-xxACS
Transil TVS for IEC 61000-4-5 compliance Datasheet - production data differential mode MIL STD 883G, method 3015-7 Class 3B 25 kv HBM (human body model) Resin meets UL 94, V0 MIL-STD-750, method 2026 solderability
RClamp0514M RailClamp Low Capacitance TVS Diode Array PRELIMINARY Features
RailClamp Description RailClamps are ultra low capacitance TVS arrays designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive components which are
µclamp3601p TVS Diode for Proximity Switch Input Protection PROTECTION PRODUCTS - MicroClamp Description Features Mechanical Characteristics
PRTECTIN PRDUCTS - MicroClamp Description The µclamp P is a high-surge transient voltage suppressor (TVS) optimized for protection of sensitive digital sensors used in proximity switches and industrial
uclamp0541z Ultra Small μclamp 1-Line ESD Protection
- Z-Pak TM Description μclamp TVS diodes are designed to protect sensitive electronics from damage or latch-up due to ESD. It is designed to replace 2 size multilayer varistors (MLVs) in portable applications
RClamp0821P. Ultra-Low Capacitance 1-Line ESD protection. PROTECTION PRODUCTS - RailClamp Description. Features. Mechanical Characteristics
- RailClamp Description The RailClamp family is a series of ultra low capacitance Transient oltage Suppressors (TS) designed to protect high speed data interfaces. This series has been specifically designed
P6KE6.8A thru P6KE540A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. www.vishay.com FEATURES PRIMARY CHARACTERISTICS
TRANSZORB Transient Voltage Suppressors DO-204AC (DO-15) PRIMARY CHARACTERISTICS V WM 5.8 V to 459 V V BR uni-directional 6.8 V to 540 V V BR bi-directional 6.8 V to 440 V P PPM 600 W P D 5.0 W I FSM (uni-directional
SLVU2.8. PROTECTION PRODUCTS Absolute Maximum Rating. Electrical Characteristics I T I PP V R I PT I F. www.semtech.com. 2008 Semtech Corp.
Description The SL series of transient voltage suppressors are designed to protect low voltage, state-of-the-art MOS semiconductors from transients caused by electrostatic discharge (ESD), cable discharge
LC05-6. Dual Low Capacitance TVS Array for Telecom Line-Card Applications. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics
Description The LC5-6 has been specifically designed to protect sensitive components which are connected to highspeed telecommunications lines from over voltages caused by lightning, electrostatic discharge
1.5KE6.8A thru 1.5KE540A, 1N6267A thru 1N6303A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. www.vishay.
TRANSZORB Transient Voltage Suppressors Case Style.5KE FEATURES Glass passivated chip junction Available in uni-directional and bi-directional 500 W peak pulse power capability with a /0 μs waveform, repetitive
Features. Applications. Truth Table. Close
ASSR-8, ASSR-9 and ASSR-8 Form A, Solid State Relay (Photo MOSFET) (0V/0.A/0Ω) Data Sheet Description The ASSR-XX Series consists of an AlGaAs infrared light-emitting diode (LED) input stage optically
RClamp0522PA RClamp0524PA
PROTECTION PRODUCTS - RailClamp Description RailClamp TVS arrays are ultra low capacitance ESD protection devices designed to protect high speed data interfaces. This series has been specifically designed
ESD9X3.3ST5G Series, SZESD9X3.3ST5G Series. Transient Voltage Suppressors Micro Packaged Diodes for ESD Protection
ESD9X3.3ST5G Series, SZESD9X3.3ST5G Series Transient Voltage Suppressors Micro Packaged Diodes for ESD Protection The ESD9X Series is designed to protect voltage sensitive components from ESD. Excellent
NUP2105L, SZNUP2105L. Dual Line CAN Bus Protector SOT 23 DUAL BIDIRECTIONAL VOLTAGE SUPPRESSOR 350 W PEAK POWER
Dual Line CAN Bus Protector The SZ/NUP215L has been designed to protect the CAN transceiver in high speed and fault tolerant networks from ESD and other harmful transient voltage events. This device provides
STF203-15 THRU STF203-33
Description The STF03 is a combination EMI filter and line termination device with integrated diodes for use on upstream USB ports. It is constructed using a proprietary technology that allows passive
CLA4607-085LF: Surface Mount Limiter Diode
DATA SHEET CLA4607-085LF: Surface Mount Limiter Diode Applications Low-loss, high-power limiters Receiver protectors Anode (Pin 1) Anode (Pin 3) Features Low thermal resistance: 55 C/W Typical threshold
CAN bus ESD protection diode
Rev. 04 15 February 2008 Product data sheet 1. Product profile 1.1 General description in a small SOT23 (TO-236AB) Surface-Mounted Device (SMD) plastic package designed to protect two automotive Controller
Small Signal Fast Switching Diode
Small Signal Fast Switching Diode MECHANICAL DATA Case: SOD- Weight: approx.. mg Packaging codes/options: 8/K per " reel (8 mm tape), K/box 08/K per 7" reel (8 mm tape), K/box FEATURES Silicon epitaxial
uclamp3301d Low Voltage µclamp TM for ESD and CDE Protection PROTECTION PRODUCTS - MicroClamp TM Description Features Mechanical Characteristics
MicroClamp TM Description The µclamp TM series of Transient oltage Suppressors (TS) are designed to replace multilayer varistors (MLs) in portable applications such as cell phones, notebook computers,
LC01-6. Low Capacitance TVS for High-Speed Telecommunication Systems. PROTECTION PRODUCTS Description. Features. Applications
escription The transient voltage suppressor is designed to protect components which are connected to high speed telecommunication lines from voltage surges caused by lightning, electrostatic discharge
ESDLIN1524BJ. Transil, transient voltage surge suppressor diode for ESD protection. Features. Description SOD323
Transil, transient voltage surge suppressor diode for ESD protection Datasheet production data Features Max peak pulse power 160 W (8/0 µs) Asymmetrical bidirectional device Stand-off voltage: 15 and 4
PRTR5V0U2F; PRTR5V0U2K
Rev. 02 19 February 2009 Product data sheet 1. Product profile 1.1 General description Ultra low capacitance double rail-to-rail ElectroStatic Discharge (ESD) protection devices in leadless ultra small
LC03-3.3. Low Capacitance 3.3 Volt TVS for High Speed Interfaces. PROTECTION PRODUCTS Description. Features. Applications
Descrition The LC3-3.3 transient voltage suressor is designed to rotect comonents which are connected to high seed data and telecommunication lines from voltage surges caused by lightning, electrostatic
DSL03. Low capacitance TVS for high speed lines such as xdsl. Description. Features. Complies with the following standards
Low capacitance TVS for high speed lines such as xdsl Description Datasheet - production data Features High surge capability to comply with GR-1089 and ITU-T K20/21 Keeps its peak power capability up to
LC03-6R2G. Low Capacitance Surface Mount TVS for High-Speed Data Interfaces. SO-8 LOW CAPACITANCE VOLTAGE SUPPRESSOR 2 kw PEAK POWER 6 VOLTS
Low Capacitance Surface Mount TVS for High-Speed Data terfaces The LC3- transient voltage suppressor is designed to protect equipment attached to high speed communication lines from ESD, EFT, and lighting.
STF201-22 & STF201-30
Description The STF201 is a combination EMI filter and line termination device with integrated TVS diodes for use on downstream USB ports. It is constructed using a proprietary technology that allows passive
Optocoupler, Phototransistor Output, Dual Channel, SOIC-8 Package
ILD25T, ILD26T, ILD27T, ILD211T, ILD213T Optocoupler, Phototransistor Output, Dual Channel, SOIC-8 Package i17925 A1 C2 A3 C4 i17918-2 8C 7E 6C 5E DESCRIPTION The ILD25T, ILD26T, ILD27T, ILD211T, and ILD213T
A I DM. W/ C V GS Gate-to-Source Voltage ± 20. Thermal Resistance Symbol Parameter Typ. Max. Units
V DS 2 V V GS Max ± 2 V R DSon) max @V GS = V) 24 m * PD - 9787A HEXFET Power MOSFET R DSon) max @V GS = 4.V) 4 m 6 Micro3 TM SOT-23) Applications) Load System Switch Features and Benefits Features Benefits
How To Make An Electric Static Discharge (Esd) Protection Diode
Rev. 01 0 October 2008 Product data sheet 1. Product profile 1.1 General description Ultra low capacitance bidirectional ElectroStatic Discharge (ESD) protection diodes in small Surface-Mounted Device
EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet 0805 Package Chip LED Preliminary
Feature RoHS compliant. This is a preliminary specification Chip LED package. intended for design purposes and Colorless clear resin. Wide viewing angle 130 o. subject to change without prior Brightness:
Surface Mount Schottky Barrier
FEATURES - Very low profile - typical height of 0.68mm - Low power loss, high efficiency - Ideal for automated placement - Moisture sensitivity level: level, per J-STD-020 - Compliant to RoHS Directive
A I DM. W/ C V GS Gate-to-Source Voltage ± 12. Thermal Resistance Symbol Parameter Typ. Max. Units
V DS 2 V V GS Max ±2 V * PD - 973A HEXFET Power MOSFET R DSon) max @V GS = 4.V) 2. m R DSon) max @V GS = 2.V) 27. m 6 Micro3 TM SOT-23) Applications) Load System Switch Features and Benefits Features Benefits
LIN-bus ESD protection diode
Rev. 3 31 May 2011 Product data sheet 1. Product profile 1.1 General description in a very small SOD323 (SC-76) Surface-Mounted Device (SMD) plastic package designed to protect one automotive Local Interconnect
PDS5100H. Product Summary. Features and Benefits. Mechanical Data. Description and Applications. Ordering Information (Note 5) Marking Information
Green 5A HIGH VOLTAGE SCHOTTKY BARRIER RECTIFIER POWERDI 5 Product Summary I F V R V F MAX (V) I R MAX (ma) (V) (A) @ +25 C @ +25 C 1 5..71.35 Description and Applications This Schottky Barrier Rectifier
Small Signal Fast Switching Diode FEATURES PART ORDERING CODE INTERNAL CONSTRUCTION TYPE MARKING REMARKS
Small Signal Fast Switching Diode MARKING (example only) Bar = cathode marking XY = type code X Y 6 MECHANICAL DATA Case: SOD- Weight: approx.. mg Packaging codes/options: 8/K per " reel (8 mm tape), K/box
LCDA12C-8 and LCDA15C-8
ROTECTION RODUCTS Descrition The LCDAxxC-8 has been secifically designed to rotect sensitive comonents which are connected to data and transmission lines from over voltages caused by electrostatic discharge
Femtofarad bidirectional ESD protection diode
Rev. 3 24 October 2011 Product data sheet 1. Product profile 1.1 General description Femtofarad bidirectional ElectroStatic Discharge (ESD) protection diode in a leadless ultra small SOD882 Surface-Mounted
3mm Photodiode,T-1 PD204-6C/L3
3mm Photodiode,T-1 Features Fast response time High photo sensitivity Small junction capacitance Pb free This product itself will remain within RoHS compliant version. Description is a high speed and high
TSM2N7002K 60V N-Channel MOSFET
SOT-23 SOT-323 Pin Definition: 1. Gate 2. Source 3. Drain PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (ma) 5 @ V GS = 10V 100 60 5.5 @ V GS = 5V 100 Features Low On-Resistance ESD Protection High Speed Switching
RClamp0522P RClamp0524P
PROTECTION PRODUCTS - RailClamp Description RailClamp TVS arrays are ultra low capacitance ESD protection devices designed to protect high speed data interfaces. This series has been specifically designed
PESDxU1UT series. 1. Product profile. Ultra low capacitance ESD protection diode in SOT23 package. 1.1 General description. 1.
Rev. 02 20 August 2009 Product data sheet 1. Product profile 1.1 General description Ultra low capacitance ElectroStatic Discharge (ESD) protection diode in a SOT23 (TO-236AB) small SMD plastic package
Features. P-Channel Enhancement Mode MOSFET
P-Channel Enhancement Mode MOSFET Features Pin Description -4V/-25, R DS(ON) = 4mΩ (typ.) @ V GS = -V R DS(ON) = 55mΩ (typ.) @ V GS = -5V Super High Dense Cell Design G D S Reliable and Rugged Lead Free
Optocoupler, Phototransistor Output, with Base Connection, 300 V BV CEO
SFH64 Optocoupler, Phototransistor Output, with Base Connection, 3 V BV CEO i1794-3 DESCRIPTION The SFH64 is an optocoupler with very high BV CER, a minimum of 3 V. It is intended for telecommunications
Table 1. Absolute maximum ratings (T amb = 25 C) Symbol Parameter Value Unit. ISO 10605 - C = 330 pf, R = 330 Ω : Contact discharge Air discharge
Automotive dual-line Transil, transient voltage suppressor (TVS) for CAN bus Datasheet - production data Complies with the following standards ISO 10605 - C = 150 pf, R = 330 Ω : 30 kv (air discharge)
IEC 1000-4-2 ESD Immunity and Transient Current Capability for the SP72X Series Protection Arrays
IEC 00-4-2 ESD Immunity and Transient Current Capability for the SP72X Series Protection Arrays Application Note July 1999 AN9612.2 Author: Wayne Austin The SP720, SP721, SP723, and SP724 are protection
SMS7630-061: Surface Mount, 0201 Zero Bias Silicon Schottky Detector Diode
DATA SHEET SMS7630-061: Surface Mount, 0201 Zero Bias Silicon Schottky Detector Diode Applications Sensitive RF and microwave detector circuits Sampling and mixer circuits High volume wireless systems
MMBZ52xxBLT1G Series, SZMMBZ52xxBLT3G. Zener Voltage Regulators. 225 mw SOT 23 Surface Mount
MMBZ5xxBLTG Series, SZMMBZ5xxBLTG Series Zener Voltage Regulators 5 mw SOT Surface Mount This series of Zener diodes is offered in the convenient, surface mount plastic SOT package. These devices are designed
Optocoupler, Phototransistor Output, 4 Pin LSOP, Long Creepage Mini-Flat Package
Optocoupler, Phototransistor Output, 4 Pin LSOP, Long Creepage Mini-Flat Package FEATURES A 4 C Low profile package High collector emitter voltage, V CEO = 8 V 7295-6 DESCRIPTION The has a GaAs infrared
1SMB59xxBT3G Series, SZ1SMB59xxT3G Series. 3 Watt Plastic Surface Mount Zener Voltage Regulators
9xxBTG Series, SZ9xxTG Series Watt Plastic Surface Mount Zener Voltage Regulators This complete new line of W Zener diodes offers the following advantages. Features Zener Voltage Range. V to V ESD Rating
MADP-000504-10720T. Non Magnetic MELF PIN Diode
MADP-54-172T Features High Power Handling Low Loss / Low Distortion Leadless Low Inductance MELF Package Non-Magnetic Surface Mountable RoHS Compliant MSL 1 Package Style 172 Dot Denotes Cathode Description
Surface Mount TRANSZORB Transient Voltage Suppressors
Surface Mount TRANSZORB Transient Voltage Suppressors DO-214AA (SMB J-Bend) PRIMARY CHARACTERISTICS V BR (bi-directional) 6.4 V to 231 V V BR (uni-directional) 6.4 V to 231 V V WM 5.0 V to 188 V P PPM
ESD7484. 4-Line Ultra-Large Bandwidth ESD Protection
4-Line Ultra-Large Bandwidth ESD Protection Functional Description The ESD7484 chip is a monolithic, application specific discrete device dedicated to ESD protection of the HDMI connection. It also offers
Features. Symbol JEDEC TO-220AB
Data Sheet June 1999 File Number 2253.2 3A, 5V,.4 Ohm, N-Channel Power MOSFET This is an N-Channel enhancement mode silicon gate power field effect transistor designed for applications such as switching
Load Switch with Level-Shift
Load Switch with Level-Shift PRODUCT SUMMARY V IN (V DS2 ) (V) R DS(on) (Ω) I D (A).5 to 2 DESCRIPTION.54 at V IN = 4.5 V 3.9.77 at V IN = 2.5 V 3.2.6 at V IN =.8 V 2.8.65 at V IN =.5 V 2.2 The includes
Preamplifier Circuit for IR Remote Control
Preamplifier Circuit for IR Remote Control 22906 FEATURES Carrier-out-function: carrier frequency and burst length accurately correspond to the input signal AC coupled response from 20 khz to 60 khz; all
RClamp 3354S Low Voltage RClamp Surge Protection for GbE Interfaces
- RailClamp Description RailClamp TVS diodes are specifi cally designed to protect sensitive components which are connected to high-speed data and transmission lines from overvoltage cased by ESD (electrostatic
NUP4106. Low Capacitance Surface Mount TVS for High-Speed Data Interfaces SO 8 LOW CAPACITANCE VOLTAGE SUPPRESSOR 500 WATTS PEAK POWER 3.
Low Capacitance Surface Mount TVS for High-Speed Data Interfaces The NUP0 transient voltage suppressor is designed to protect equipment attached to high speed communication lines from ESD and lightning.
7 OUT1 8 OUT2 9 OUT3 10 OUT4 11 OUT5 12 OUT6 13 OUT7 14 OUT8 15 OUT9 16 OUT10 17 OUT11 18 OUT12 19 OUT13 20 OUT14 21 OUT15 22 OUT16 OUT17 23 OUT18
18 CHANNELS LED DRIVER GENERAL DESCRIPTION IS31FL3218 is comprised of 18 constant current channels each with independent PWM control, designed for driving LEDs. The output current of each channel can be
USBP01-5M8. ESD protection for enhanced micro USB interface. Features. Applications. Description. Complies with following standards
USBP01-5M8 ESD protection for enhanced micro USB interface Datasheet production data Features D+/D- and ID lines protection with 7 V low voltage diodes (LV) V BUS line protection with 32 V high voltage
1 Form A Solid State Relay
Form A Solid State Relay VOAT, VOAABTR FEATURES 9 S S DC S' 3 S' High speed SSR - t on /t off < 8 μs Maximum R ON. Isolation test voltage 3 V RMS Load voltage V Load current A DC configuration DIP- package
SM6T. Transil. Features. Description. Complies with the following standards. Peak pulse power: 600 W (10/1000 µs).
Transil Features Peak pulse power: 600 W (10/1000 µs) 4 kw (8/20 µs) Breakdown voltage range: from 6.8 V to 220 V Unidirectional and bidirectional types Low leakage current: 0.2 µa at 25 C 1 µa at 85 C
S112-XHS. Description. Features. Agency Approvals. Applications. Absolute Maximum Ratings. Schematic Diagram. Ordering Information
Description Features The S112-X is a bi-directional, single-pole, single-throw, normally open multipurpose solid-state relay. The circuit is composed of one input IR LED with a series limiting resistor
Low forward voltage High breakdown voltage Guard-ring protected Hermetically sealed glass SMD package
Rev. 6 10 September 2010 Product data sheet 1. Product profile 1.1 General description Planar with an integrated guard ring for stress protection, encapsulated in a small hermetically sealed glass SOD80C
1N59xxBRNG Series. 3 W DO-41 Surmetic 30 Zener Voltage Regulators
W DO-4 Surmetic 0 Zener Voltage Regulators This is a N9xxBRNG series with limits and excellent operating characteristics that reflect the superior capabilities of silicon oxide passivated junctions. All
3-Channel Supervisor IC for Power Supply
3-Channel Supervisor IC for Power Supply Features Over-voltage protection and lockout Under-voltage protection and lockout Open drain power good output signal Built-in 300mS delay for power good 38mS de-bounce
P-Channel 20 V (D-S) MOSFET
Si30CDS P-Channel 0 V (D-S) MOSFET MOSFET PRODUCT SUMMARY V DS (V) R DS(on) ( ) I D (A) a Q g (Typ.) - 0 0. at V GS = - 4.5 V - 3. 0.4 at V GS = -.5 V -.7 3.3 nc TO-36 (SOT-3) FEATURES Halogen-free According
1.5SMC6.8AT3G Series, SZ1.5SMC6.8AT3G Series. 1500 Watt Peak Power Zener Transient Voltage Suppressors. Unidirectional*
.6.8AT3G Series, SZ.6.8AT3G Series 00 Watt Peak Power Zener Transient Voltage Suppressors Unidirectional* The series is designed to protect voltage sensitive components from high voltage, high energy transients.
IN1M101 Precision AC Brown-out Supervisor IC
Precision AC Brown-out Supervisor IC Rev.1.1 03 30 2011 Specification General Description provides a precise comparator to detect the rectified AC voltage, which could protect the SPS when AC voltage is
BAT54 series SOT23 Schottky barrier diodes Rev. 5 5 October 2012 Product data sheet 1. Product profile 1.1 General description
SOT2 Rev. 5 5 October 2012 Product data sheet 1. Product profile 1.1 General description Planar with an integrated guard ring for stress protection, encapsulated in a small SOT2 (TO-26AB) Surface-Mounted
IP4234CZ6. 1. Product profile. Single USB 2.0 ESD protection to IEC 61000-4-2 level 4. 1.1 General description. 1.2 Features. 1.
Rev. 01 16 April 2009 Product data sheet 1. Product profile 1.1 General description The is designed to protect Input/Output (I/O) USB 2.0 ports, that are sensitive to capacitive loads, from being damaged
DOMINANT. Opto Technologies Innovating Illumination. InGaN White S-Spice : SSW-SLD DATA SHEET: SpiceLED TM. Features: Applications:
DATA SHEET: SpiceLED TM SpiceLED TM Like spice, its diminutive size is a stark contrast to its standout performance in terms of brightness, durability and reliability. Despite being the smallest in size
Optocoupler, Phototransistor Output, AC Input
Optocoupler, Phototransistor Output, AC Input DESCRIPTION The SFH62A (DIP) and SFH626 (SMD) feature a high current transfer ratio, low coupling capacitance and high isolation voltage. These couplers have
P-Channel 20-V (D-S) MOSFET
Si33DS P-Channel -V (D-S) MOSFET PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (A).39 at V GS = -.5 V -.7 -.5 at V GS = -.5 V -..68 at V GS = -.8 V - 3.5 FEATURES Halogen-free According to IEC 69-- Available
P6KE. Transil, transient voltage surge suppressor (TVS) Features. Description. Complies with the following standards
Transil, transient voltage surge suppressor (TVS) Datasheet production data Features Peak pulse power: 600 W (10/0 µs ) Stand-off voltage range 6.8 to 440 V Unidirectional and bidirectional types Low clamping
BZW50. Transil, transient voltage surge suppressor (TVS) Features. Description
Transil, transient voltage surge suppressor (TVS) Datasheet production data Features Peak pulse power: 5000 W (10/0 µs) Stand-off voltage range from 10 V to 180 V Unidirectional and bidirectional types
Dual Common-Cathode Ultrafast Plastic Rectifier
(F,B)6AT thru (F,B)6JT Dual Common-Cathode Ultrafast Plastic Rectifier TO-0AB 6xT PIN PIN 3 PIN CASE 3 TO-63AB ITO-0AB F6xT PIN PIN 3 PIN 3 FEATURES Glass passivated chip junction Ultrafast recovery time
High-speed switching diodes. Type number Package Configuration Package NXP JEITA JEDEC
Rev. 8 18 November 2010 Product data sheet 1. Product profile 1.1 General description, encapsulated in small Surface-Mounted Device (SMD) plastic packages. Table 1. Product overview Type number Package
Optocoupler, Phototransistor Output, High Reliability, 5300 V RMS, Low Input Current
Optocoupler, Phototransistor Output, High Reliability, 53 V RMS, Low Input Current FEATURES A C 1 2 4 3 C E Operating temperature from -55 C to +11 C Good CTR linearity depending on forward current Isolation
PHOTOTRANSISTOR OPTOCOUPLERS
MCT2 MCT2E MCT20 MCT27 WHITE PACKAGE (-M SUFFIX) BLACK PACKAGE (NO -M SUFFIX) DESCRIPTION The MCT2XXX series optoisolators consist of a gallium arsenide infrared emitting diode driving a silicon phototransistor
Optocoupler, Phototransistor Output, with Base Connection
Optocoupler, Phototransistor Output, with Base Connection FEATURES i794-4 DESCRIPTION This datasheet presents five families of Vishay industry standard single channel phototransistor couplers. These families
BAT64... BAT64-02W BAT64-02V BAT64-04 BAT64-04W BAT64-05 BAT64-05W BAT64-06W
Silicon Schottky Diodes For low-loss, fast-recovery, meter protection, bias isolation and clamping application Integrated diffused guard ring Low forward voltage Pb-free (RoHS compliant) package Qualified
1SMA5.0AT3G Series, SZ1SMA5.0AT3G Series. 400 Watt Peak Power Zener Transient Voltage Suppressors. Unidirectional
.AT3G Series, SZ.AT3G Series 4 Watt Peak Power Zener Transient Voltage Suppressors Unidirectional The series is designed to protect voltage sensitive components from high voltage, high energy transients.
N-Channel 100 V (D-S) MOSFET
Si4DS N-Channel V (D-S) MOSFET MOSFET PRODUCT SUMMARY V DS (V) R DS(on) ( ) I D (A) a Q g (Typ.).4 at V GS = V..67 at V GS = 6 V..9 nc.78 at V GS = 4.5 V.7 FEATURES TrenchFET Power MOSFET % R g Tested
N-channel enhancement mode TrenchMOS transistor
FEATURES SYMBOL QUICK REFERENCE DATA Trench technology d V DSS = V Low on-state resistance Fast switching I D = A High thermal cycling performance Low thermal resistance R DS(ON) mω (V GS = V) g s R DS(ON)
Low Current SMD LED PLCC-2
Low Current SMD LED PLCC-2 VLMC31. 19225 DESCRIPTION These new devices have been designed to meet the increasing demand for low current SMD LEDs. The package of the VLMC31. is the PLCC-2 (equivalent to
ASSR-1410, ASSR-1411 and ASSR-1420 General Purpose, Form A, Solid State Relay (Photo MOSFET) (60V/0.6A/1Ω) Features. Applications. Truth Table.
ASSR-, ASSR- and ASSR- General Purpose, Form A, Solid State Relay (Photo MOSFET) (V/.A/Ω) Data Sheet Lead (Pb) Free RoHS fully compliant RoHS fully compliant options available; -xxxe denotes a lead-free
28V, 2A Buck Constant Current Switching Regulator for White LED
28V, 2A Buck Constant Current Switching Regulator for White LED FP7102 General Description The FP7102 is a PWM control buck converter designed to provide a simple, high efficiency solution for driving
CM1213A-04SO, SZCM1213A-04SO 4-Channel Low Capacitance ESD Protection Array
CM1213A-04SO, SZCM1213A-04SO 4-Channel Low Capacitance ESD Protection Array Product Description CM1213A 04SO has been designed to provide ESD protection for electronic components or subsystems requiring