RJ45 Connectors. RJ45 Connectors. Interconnect Solutions Worldwide

Transcription

1 Connectors Connectors D3999 Derived Cat5e / Cat6 & Cat6a Connector ssemblies for Harsh Environments NCGE Code U5792

2 Connectors D3999 Derived Cat5e / Cat6 & Cat6a Connector ssemblies for Harsh Environments PC4B0002 Cat 5e Box Mount Feedthrough Receptacle PC4F0002 Cat 5e Jam Nut Feedthrough Receptacle PC4D0002 Cat 5e Free Plug PC4D Cat 5e Free Plug (91 Series with Spring Screen Termination) PC4B0029 Cat6 Jam Nut Feedthrough Receptacle PC4F0020 Cat6 Jam Nut Feedthrough Receptacle PC4D0024 Cat6 Plug Connector ssembly PC4B0022 Cat6a Box Mount Feedthrough Receptacle PC4F0014 Cat6a Jam Nut Feedthrough Receptacle PC4D001 & PC4D001** Cat6a Free Plug PC4D0023 Cat6a Field Plug Connector ssembly Cat5 Tooling Options Cat6 & Cat6a Tooling Options Connector Modifications Performance Cat 5e per ISO/IEC 1101 Cat 6 1Gb with enhanced grounding option Cat 6a 10Gb with enhanced grounding option D3999 shell size 19 Sealed to IP6 for fluid and dust laden environments High levels of shock, vibration and mechanical impact protection Fully enclosed luminium, Marine Bronze and Stainless Steel shells for superior mechanical strength Positive cordset retention >100N axial force Optional external screen termination features on cable plug Isolated RJ-to-shell grounding option The Polamco high speed connector system incorporates a series III derived metal shell with full 360 degree EMC and mechanical protection and has been designed to meet the requirements of high speed data connections where reliability through environmental sealing and enhanced mechanical protection and EMC performance are required.

3 Material & Plating MTERIL DESCRIPTION 1 LUMINIUM LLOY 6262 / NICKEL LUMINIUM BRONZE DGS 1043/NES 33 3 BRSS CZ STINLESS STEEL 303 S31 44 STINLESS STEEL STINLESS STEEL H.D.H.C COPPER C STINLESS STEEL NUT / LUMINIUM BODY 7 BLCK CETL 73 PEEK GL30 74 ULTEM 2300 (30% GLSS FILLED) NOTE: PLESE CONTCT SLES OFFICE FOR MTERILS NOT LISTED BOVE 3 PLTING CODE PLTING DESCRIPTION CDMIUM, OLIVE DRB (5-10 MICRONS) QQ-P-416, TYPE II, CLSS 3 OVER ELECTROLESS NICKEL ROHS COMPLINT (SUBJECT TO EXEMPTION) ENVIRONMENT PROTECTION/ CONDUCTIVITY CONDUCTIVE 500 HRS SLT SPRY. EXEMPTION PPLICBLE FOR EROSPCE / MILITRY PPLICTIONS. SEE ROHS WEBSITES FOR MORE INFORMTION. B NODISE BLUE TO DEF NON CONDUCTIVE R NODISE RED TO DEF NON CONDUCTIVE B C CHP D F G H CDMIUM, OLIVE DRB (5-10 MICRONS) QQ-P-416, TYPE II, CLSS 3 OVER ELECTROLESS NICKEL ELECTROLESS NICKEL, MS-C-26074, CLSS 4, GRDE B ELECTROLESS NICKEL, HIGH PHOSPHOR (9% - 14%), 22 MICRONS MINIMUM, BSEN ISO 4527:2003 BLCK NODISE HRD PER MIL--625, TYPE III, CLSS MICRONS BRIGHT ELECTROLESS NICKEL TO MIL-C-26074D, CLSS 4, GRDE C BLCK NODISE, SULPHURIC, PER MIL--625, TYPE II, CLSS 2 CDMIUM GOLD, PER QQ-P-416, TYPE II, CLSS 3 (SUBJECT TO EXEMPTION) (SUBJECT TO EXEMPTION) CONDUCTIVE 500 HRS SLT SPRY. EXEMPTION PPLICBLE FOR EROSPCE / MILITRY PPLICTIONS. SEE ROHS WEBSITES FOR MORE INFORMTION. CONDUCTIVE CONDUCTIVE NON CONDUCTIVE CONDUCTIVE 500 HRS SLT SPRY NON CONDUCTIVE CONDUCTIVE. EXEMPTION PPLICBLE FOR EROSPCE / MILITRY PPLICTIONS. SEE ROHS WEBSITES FOR MORE INFORMTION. H HRD NODISE, GREY, MICRONS NON CONDUCTIVE J PSSIVTE, PER QQ-P-35 OR MI-S-5002 ROHS COMPLINT K CHROMIC NODISING, DEF 151, TYPE II NO NON CONDUCTIVE L LOCROM 1200 NO CONDUCTIVE LR IRIDITE CONVERSION ROHS COMPLINT VERSION OF LOCROM 1200, CLER/ IRIDESCENT, LUMINIUM ONLY CONDUCTIVE Tel: +44 (0) THIS DRWING IS THE PROPERTY OF POLMCO LTD ND MUST NOT BE USED FOR COMMERCIL PURPOSES WITHOUT WRITTEN CONSENT OF THE COMPNY

4 Material & Plating PLTING CODE PLTING DESCRIPTION ROHS COMPLINT ENVIRONMENT PROTECTION/ CONDUCTIVITY LV 5 MICRONS SILVER ND BLCKEN TO DEF 03-9 CONDUCTIVE M P R BRIGHT CDMIUM OVER NICKEL QQ-P-416, TYPE II, CLSS 3 HEVY NICKEL TO PLTING SPECIFICTION CP07 (500 HOUR SLT SPRY FINISH) CDMIUM, OLIVE DRB (5-10 MICRONS) QQ-P-416, TYPE II, CLSS 3 OVER ELECTROLESS NICKEL ( MICRONS) RER OF BCKSHELL TO HVE SELECTIVE ELECTROLESS PLTING C-PLTE (SUBJECT TO EXEMPTION) (SUBJECT TO EXEMPTION) CONDUCTIVE 500 HRS SLT SPRY. EXEMPTION PPLICBLE FOR EROSPCE / MILITRY PPLICTIONS. SEE ROHS WEBSITES FOR MORE INFORMTION. CONDUCTIVE 500 HRS SLT SPRY CONDUCTIVE 500 HRS SLT SPRY. EXEMPTION PPLICBLE FOR EROSPCE / MILITRY PPLICTIONS. SEE ROHS WEBSITES FOR MORE INFORMTION. T TIN PLTE (COPPER) TO DEF 03- CONDUCTIVE TN NICKEL/PTFE CONDUCTIVE 500 HRS SLT SPRY U UNPLTED CLEN FINISH NOT SHOT BLSTED V SILVER PLTE 5 MICRONS TO DEF 03-9 CONDUCTIVE Y YELLOW CHROMTE OVER CDMIUM QQ-P-416, TYPE II, CLSS 2 Z SHOT BLST FOR NON-REFLECTIVE FINISH ZB ZBC ZBBC ZK ZN ZNB ZNY ZY ZINC COBLT, OLIVE DRB (5-10 MICRONS) OVER ELECTROLESS NICKEL ( MICRONS) ZB-NUT (ZINC COBLT OLIVE DRB OVER ELECTROLESS NICKEL) C-FOLLOWER (ELECTROLESS NICKEL) - 91 SERIES ONLY ZB-NUT (ZINC COBLT OLIVE DRB OVER ELECTROLESS NICKEL) ZB-FOLLOWER (ZINC COBLT OLIVE DRB OVER ELECTROLESS NICKEL) WITH C MSKED RE (ELECTROLESS NICKEL - SEE BOVE) - 91 SERIES ONLY ZINC COBLT BLCK PSSIVTE (5-10 MICRONS) OVER ELECTROLESS NICKEL ( MICRONS) ZINC NICKEL BLCK PSSIVTE (5-12 MICRONS) OVER ELECTROLESS NICKEL (-12 MICRONS), STM B 41 CLSS 1 ELECTROLESS NICKEL -12 MICRONS/ ZINC NICKEL 5-12/PURE ZINC/OLIVE DRB PSSIVTION, STM B 41 CLSS 1 ELECTROLESS NICKEL -12 MICRONS/ ZINC NICKEL 5-12 MICRONS/YELLOW PSSIVTION, STM B 41 CLSS 1 ZINC COBLT YELLOW CHROMTE ( MICRONS) OVER ELECTROLESS NICKEL ( MICRONS) NO NO NO NO NO CONDUCTIVE CONDUCTIVE 350 HRS SLT SPRY. CONDUCTIVE 350 HRS SLT SPRY. ZB. CONDUCTIVE 350 HRS SLT SPRY. CONDUCTIVE 350 HRS SLT SPRY. ROHS COMPLINT VRINT UNDER DEVELOPMENT, SUBJECT TO TESTING SHOULD BE VILBLE FIRST QURTER 2011 CONDUCTIVE (NOT ROHS COMPLINT, UNTESTED 500 HRS SLT SPRY FINISH) CONDUCTIVE (NOT ROHS COMPLINT, UNTESTED 500 HRS SLT SPRY FINISH) CONDUCTIVE 500 HRS SLT SPRY 4 THIS DRWING IS THE PROPERTY OF POLMCO LTD ND MUST NOT BE USED FOR COMMERCIL PURPOSES WITHOUT WRITTEN CONSENT OF THE COMPNY

5 Cat5 Connectors PC4B Box Mount Feedthrough Receptacle DRWING NO C1024 3RD NGLE PROJECTION REMOVE LL SHRP EDGES ND BURRS 29,36 TYPICL 26,9 TYPICL 4,93, CT5 FEEDTHROUGH CONNECTOR GROUNDED TO OUTER SHELL DT TRNSFER RTE TESTED TO 1 GIGBIT, CONTCT SLES OFFICE FOR TEST RESULTS - 36, P-0.3L-TS Ø2,00 3,25 GENERLLY TO THE REQUIREMENTS OF FINISH SEE MTERIL ND PLTING OPTIONS SHEET MTERILS CONTCTS 30μ u/ni SHIELDING - NICKEL PLTED BRSS BODY - P, UL94V-0 GENERLLY TO THE REQUIREMENTS OF SEL - SILICONE MS749ECR TO BS653 CT 1 INSULTOR - PPS GL40 UL94 POTTING - QSIL 550 UL94V-0 PERFORMNCE CURRENT RTING FOR POWER CONTCTS C VOLTGE RTING 50V DC / 35V C TEMPERTURE -40 C TO +120 C MTERILS PERFORMNCE ISSUE DCR NO. DTE PPROVED UNLESS OTHERWISE MTERIL DO NOT SCLE CURRENT SPECIFIED RTING FOR POWER LL DIMENSIONS IN THIS CONTCTS DRWING /11/2009 JXS MILLIMETRES CONTCTS 30µ u/ni TOLERNCE ON THIS DRWING IS COPYRIGHT, SEE 70 C DIMENSIONS +/-0.1MM ND SHIELDING - NICKEL PLTED BRSS TOLERNCE ON NGLES THE PROPERTY OF POLMCO LTD. BOVE VOLTGE RTING 50V DC / 35V C +/- 1 DEGREE IT MUST NOT BE COPIED, USED FOR MNUFCTURE OR BODY - P, UL94V-0 TEMPERTURE -40 C TO +120 C OTHERWISE WEIGHT DISCLOSED WITHOUT PRIOR WRITTEN CONSENT OF THE NCGE CODE: U5792 M.PUL COMPNY. DRWN 21,50 PRT/BTCH MRK HERE 45,00 SEL - SILICONE MS749ECR TO BS653 CT 1 INSULTOR - PPS GL40 UL94 POTTING - QSIL 550 UL94V-0 POLMCO LTD TITLE WIRING DIGRM 4 WY CROSS OVER CT5 BOX MOUNT FEEDTHROUGH RECEPTCLE LOWER BRISTOL ROD BTH B2 1EP PRT NOPC4B0002-X-19X-X-X DRWING NO WIRING DIGRM WY STRIGHT THROUGH EXMPLE PRT NUMBER: PC4B0002-C-19N-1-C PC4B0002 = POLMCO SERIES STYLE = 4 WY B = 4 WY + 2 POWER CONTCTS WY (STNDRD) D = WY + 2 POWER CONTCTS KEY RRNGEMENT 1 = SEE MTERIL ND PLTING OPTIONS SHEET SEE MTERIL ND PLTING OPTIONS SHEET PRT NUMBER FOR UNGROUNDED VERSION: PC4B0002-C-U-19N-1-C SSY USED ON -20/ C1024 EXMPLE PRT NUMBER: PC4B0002-C-19N-1-C PC4B0002 = POLMCO SERIES STYLE = 4 WY B = 4 WY + 2 POWER CONTCTS WY (STNDRD) D = WY + 2 POWER CONTCTS KEY RRNGEMENT 1 = MTERIL (LUMINIUM LLOY) SEE PGE 3 PLTING: SEE PGES PRT NUMBER FOR UNGROUNDED VERSION: PC4B0002-C-U-19N-1-C PRT NUMBER ND BTCH CODE WILL BE MRKED ON THE SSEMBLY UNLESS OTHERWISE SPECIFIED Tel: +44 (0) DRWING NOT TO SCLE THIS DRWING IS THE PROPERTY OF POLMCO LTD ND MUST NOT BE USED FOR COMMERCIL PURPOSES WITHOUT WRITTEN CONSENT OF THE COMPNY

6 Cat5 Connectors PC4F Feedthrough Jam Nut Receptacle O 3RD NGLE PROJECTION REMOVE LL SHRP EDGES ND BURRS, CT5 FEEDTHROUGH CONNECTOR GROUNDED TO OUTER SHELL DT TRNSFER RTE TESTED TO 1 GIGBIT, CONTCT SLES OFFICE FOR TEST RESULTS POTTING COMPOUND n49,20 40,00 /F - 22,60 45,00 PRT MRK HERE Ø2, WIRING DIGRM 4 WY CROSS OVER WIRING DIGRM WY STRIGHT THROUGH GENERLLY TO THE REQUIREMENTS OF REQUIREMENTS OF SEL - SILICONE MS749ECR TO BS653 CT 1 INSULTOR - PPS GL40 UL94 PLTING OPTIONS SHEET POTTING - QSIL 550 UL94V-0 PERFORMNCE CURRENT RTING FOR POWER CONTCTS C i MTERILS VOLTGE RTING 50V DC / 35V C PLTED BRSS TEMPERTURE -40 C TO +120 C CONTCTS 30µ u/ni SHIELDING - NICKEL PLTED BRSS NO. DTE PPROVED MTERIL BODY - 09/11/2009 M.PUL P, UL94V-0 LUM LLOY 6262 SEL - SILICONE MS749ECR TO BS653 CT 1 INSULTOR - PPS GL40 UL94 POTTING - QSIL 550 UL94V-0 PERFORMNCE CURRENT RTING FOR POWER CONTCTS C UNLESS OTHERWISE VOLTGE RTING 50V DC / 35V C DO NOT SCLE SPECIFIED LL DIMENSIONS TEMPERTURE IN THIS -40 C DRWING TO +120 C MILLIMETRES THIS DRWING IS COPYRIGHT, TOLERNCE ON DIMENSIONS ND TITLE +/-0.1MM THE PROPERTY OF POLMCO LTD. TOLERNCE ON NGLES IT MUST NOT BE COPIED, USED +/- 1 DEGREE FOR MNUFCTURE OR OTHERWISE EXMPLE WEIGHT PRT NUMBER: DISCLOSED WITHOUT PC4F0002-C-19N-1-C PRIOR WRITTEN CONSENT OF THE DRWN M.PUL PC4F0002 = POLMCO SERIES COMPNY. STYLE = 4 WY B = 4 WY + 2 POWER CONTCTS WY (STNDRD) D = WY + 2 POWER CONTCTS KEY RRNGEMENT 1 = MTERIL (LUMINIUM LLOY) SEE PGE 3 PLTING: SEE PGES 3-4 EXMPLE PRT NUMBER: PC4F0002-C-19N-1-C PC4F0002 = POLMCO SERIES STYLE = 4 WY B = 4 WY + 2 POWER CONTCTS WY (STNDRD) D = WY + 2 POWER CONTCTS KEY RRNGEMENT 1 = MTERIL: SEE MTERIL ND PLTING OPTIONS SHEET PLTING: SEE MTERIL ND PLTING OPTIONS SHEET PRT NUMBER FOR UNGROUNDED VERSION: PC4F0002-C-U-19N-1-C POLMCO LTD LOWER BRISTOL ROD BTH B2 1EP CT5 FEEDTHROUGH JM NUT RECEPTCLE PRT NUMBER FOR UNGROUNDED VERSION: PC4F0002-C-U-19N-1-C PRT NOPC4F0002-X-19X-X-X SSY USED ON MIL-STD-3999/24 DRWING NO C093 PRT NUMBER ND BTCH CODE WILL BE MRKED ON THE SSEMBLY UNLESS OTHERWISE SPECIFIED DRWING NOT TO SCLE THIS DRWING IS THE PROPERTY OF POLMCO LTD ND MUST NOT BE USED FOR COMMERCIL PURPOSES WITHOUT WRITTEN CONSENT OF THE COMPNY 6

7 Cat5 Connectors PC4D Plug Connector ssembly Cat5 Tooling Options: See Page 17 WING NO C094 3RD NGLE PROJECTION REMOVE LL SHRP EDGES ND BURRS, CT5 CBLE PLUG WITH INTEGRTED CBLE GUIDE, SHIELDING ND CBLE CRIMP GROUNDED TO OUTER SHELL DT TRNSFER RTE TESTED TO 1 GIGBIT CONTCT SLES OFFICE FOR TEST RESULTS - PLUG SUPPLIED WITH CONNECTOR SSEMBLY CBLE SELING GROMMET Ø 6,90 `0,50 CBLE SELING DIMETER n3,50 MX CBLE SHOWN FOR CLRITY ONLY 40,00 MX PRT MRK HERE GENERLLY TO THE REQUIREMENTS OF OTES ENERLLY TO THE REQUIREMENTS OF INISH EE MTERIL ND PLTING OPTIONS SHEET TERILS J45 ONTCTS 30μ u/ni HIELDING - NICKEL PLTED BRSS MTERILS ODY - PBT, UL94V-0 EL - SILICONE MS749ECR TO BS653 CT 1 PERFORMNCE URRENT RTING CONTCTS FOR POWER CONTCTS 30µ u/ni C OLTGE RTING 50V DC / 35V C EMPERTURE -40 C TO +120 C SHIELDING - NICKEL PLTED BRSS SUE DCR BODY NO. - P, DTE UL94V-0 PPROVED MTERIL 09/12/ DP DO NOT SCLE THIS DRWING THIS DRWING IS COPYRIGHT, ND TITLE EXMPLE PRT NUMBER: THE PC4D0002-C-19N-1-C PROPERTY OF POLMCO LTD. SEE BOVE SEL - SILICONE MS749ECR TO BS653 CT 1 PERFORMNCE CURRENT RTING FOR POWER CONTCTS C VOLTGE RTING 50V DC / 35V C TEMPERTURE -40 C TO +120 C UNLESS OTHERWISE SPECIFIED LL DIMENSIONS IN MILLIMETRES TOLERNCE ON DIMENSIONS +/-0.1MM TOLERNCE ON NGLES +/- 1 DEGREE IT MUST NOT BE COPIED, USED FOR MNUFCTURE OR OTHERWISE DISCLOSED WITHOUT PRIOR WRITTEN CONSENT OF THE COMPNY. PC4D0002 = POLMCO SERIES WEIGHT STYLE DRWN M.PUL = 4 WY 4 x 24WG B = WY 4 x 24WG + 2 x 22WG WY x 26 WG (STNDRD) D = + 2 WY x 26WG + 2 x 23WG KEY RRNGEMENT 1 = MTERIL (LUMINIUM LLOY) SEE PGE 3 PLTING: SEE PGES 3-4 PRT NUMBER FOR UNGROUNDED VERSION: PC4D0002-C-U-19N-1-C EXMPLE PRT NUMBER: PC4D0002-C-19N-1-C PC4D0002 = POLMCO SERIES STYLE = 4 WY 4 x 24WG B = WY 4 x 24WG + 2 x 22WG WY x 26 WG (STNDRD) D = + 2 WY x 26WG + 2 x 23WG KEY RRNGEMENT 1 = SEE MTERIL ND PLTING OPTIONS SHEE SEE MTERIL ND PLTING OPTIONS SHEE PRT NUMBER FOR UNGROUNDED VERSION: PC4D0002-C-U-19N-1-C POLMCO LTD LOWER BRISTOL ROD BTH B2 1EP CT5 PLUG CONNECTOR SSEMBLY PRT NOPC4D SSY US MIL-DTL-3 DRWING NO 7 PRT NUMBER ND BTCH CODE WILL BE MRKED ON THE SSEMBLY UNLESS OTHERWISE SPECIFIED Tel: +44 (0) DRWING NOT TO SCLE THIS DRWING IS THE PROPERTY OF POLMCO LTD ND MUST NOT BE USED FOR COMMERCIL PURPOSES WITHOUT WRITTEN CONSENT OF THE COMPNY

8 Cat5 Connectors PC4D Plug Connector ssembly for Double Screened pplications Cat5 Tooling Options: See Page 17 3RD NGLE PROJECTION REMOVE LL SHRP EDGES ND BURRS, CT5 CBLE PLUG WITH INTEGRTED CBLE GUIDE, SHIELDING ND CBLE CRIMP GROUNDED TO OUTER SHELL DT TRNSFER RTE TESTED TO 1 GIGBIT CONTCT SLES OFFICE FOR TEST RESULTS - PLUG SUPPLIED WITH CONNECTOR SSEMBLY CBLE SELING GROMMET Ø 6,90 `0,50 CBLE SELING DIMETER CBLE SHOWN FOR CLRITY ONLY SUPPLIED WITH SPRING PRT MRK HERE 55,00 MX LIP FOR HET SHRINK BOOT EMENTS OF G OPTIONS SHEET BRSS R TO BS653 CT 1 ER CONTCTS C 35V C 20 C GENERLLY TO THE REQUIREMENTS OF MTERILS CONTCTS 30µ u/ni SHIELDING - NICKEL PLTED BRSS. DTE PPROVED BODY - PBT, UL94V-0 MTERIL 12/04/2010 M.PUL SEE BOVE UNLESS OTHERWISE SPECIFIED LL DIMENSIONS IN MILLIMETRES TOLERNCE ON DIMENSIONS +/-0.1MM TOLERNCE ON NGLES +/- 1 DEGREE EXMPLE PRT NUMBER: PC4D C-19N-1-C PC4D = SEL - SILICONE MS749ECR TO BS653 CT 1 PERFORMNCE CURRENT RTING FOR POWER CONTCTS C PRT NUMBER FOR UNGROUNDED VERSION: PC4D C-U-19N-1-C VOLTGE RTING 50V DC / 35V C DO NOT SCLE LOWER BRISTOL ROD TEMPERTURE POLMCO LTD THIS DRWING -40 C TO +120 C PRT NO BTH B2 1EP PC4D x-19x-x-x THIS DRWING IS COPYRIGHT, ND THE PROPERTY OF POLMCO LTD. TITLE SSY USED ON IT MUST NOT COPIED, USED EXMPLE PRT NUMBER: PC4D C-19N-1-C CT5 PLUG CONNECTOR FOR MNUFCTURE OR OTHERWISE WEIGHT SSEMBLY FOR DOUBLE PC4D = POLMCO DISCLOSED SERIES WITHOUT PRIOR WRITTEN CONSENT OF THE SCREENED PPLICTION DRWN M.PUL STYLECOMPNY. = 4 DT CONTCTS (4 x 24WG) B = 4 DT + 2 POWER CONTCTS (4 x 24WG + 2 x 22WG) DT CONTCTS ( x 26 WG + 2x23WG) D = + 2 WY x 26WG + 2 x 23WG KEY RRNGEMENT 1 = MTERIL (LUMINIUM LLOY) SEE PGE 3 PLTING: SEE PGES 3-4 PRT NUMBER FOR UNGROUNDED VERSION: PC4D C-U-19N-1-C POLMCO SERIES STYLE = 4 DT CONTCTS (4 x 24WG) B = 4 DT + 2 POWER CONTCTS (4 x 24WG + 2 x 22WG) DT CONTCTS ( x 26 WG + 2x23WG) D = + 2 WY x 26WG + 2 x 23WG KEY RRNGEMENT 1 = MTERIL: SEE MTERIL ND PLTING OPTIONS SHEET PLTING: SEE MTERIL ND PLTING OPTIONS SHEET /26 DRWING NO C1135 PRT NUMBER ND BTCH CODE WILL BE MRKED ON THE SSEMBLY UNLESS OTHERWISE SPECIFIED DRWING NOT TO SCLE THIS DRWING IS THE PROPERTY OF POLMCO LTD ND MUST NOT BE USED FOR COMMERCIL PURPOSES WITHOUT WRITTEN CONSENT OF THE COMPNY

9 4,93 Cat6 Connectors PC4B Feedthrough Jam Nut Receptacle 36,50 36,50 29,36 TYPICL 26,9 TYPICL 21,50 - M2x1-6g TO SUIT 'H' INTERFCE BCKSHELLS 3, P-0.3L-TS PRT/BTCH MRK HERE OPTION X (STNDRD), CT6 FEEDTHROUGH CONNECTOR GROUNDED TO OUTER SHELL DT TRNSFER RTE TESTED TO 1 GIGBIT, CONTCT SLES OFFICE FOR TEST RESULTS OPTION W OPTION Y 005 CBLE SELING BCKSHELL OPTION OPTION Z n6,90 CBLE SELING DIMETER 55,00 MX 9 SELECTIVE GOLD PLTE GENERLLY TO THE REQUIREMENTS OF SHIELDING EXMPLE - NICKEL PRT PLTED NUMBER: BRSS PC4B NX-1-C-005 CURRENT RTING FOR POWER CONTCTS 2.1 PC4B0029 = POLMCO SERIES GENERLLY MTES WITH TO THE MPHENOL REQUIREMENTS RJFTV OF BODY - P, UL94V-0PCB - FR4, 19 = UL94V-0 70 C SHELL SIZE MTES WITH MPHENOL RJFTV LTERNTE KEYING FINISH FINISH SEL - SILICONE ELSTOMER X = VOLTGE INSERT ROTTION RTING 50V (w, x, y, DC z) / 35V C SEE MTERIL ND PLTING OPTIONS SHEET MTERIL: SEE MTERIL ND PLTING SEE PGES 15 MTERILS - 16 INSULTOR - PPS GL40 UL94, 1 = TEMPERTURE -40 C TO +120 C OPTIONS SHEET MTERILS CONTCTS COPPER WITH SELECTIVE GOLD PLTECOLOUR BLCK PLTING: SEE MTERIL ND PLTING OPTIONS SHEET SHIELDING - NICKEL PLTED BRSS BODY - P, UL94V-0 POTTING - QSIL 550 UL94V-005 = CBLE SELING BCKSHELL PRT NUMBER FOR UNGROUNDED VERSION: PC4B NX-1-C-U CONTCTS COPPER WITH SEL - SILICONE ELSTOMER INSULTOR - PPS GL40 UL94, COLOUR EXMPLE BLCK PRT NUMBER: PC4B NX-1-C-005 POTTING - QSIL 550 UL94V-0 PERFORMNCE PC4B0029 = POLMCO SERIES CURRENT RTING FOR POWER CONTCTS C VOLTGE RTING 50V DC / 35V C TEMPERTURE -40 C TO +120 C LTERNTE KEYING DTE DRWN M.PUL 12/10/2010 3RD NGLE PGE 1 UNLESS OTHERWISE SPECIFIED X = PROJECTION INSERT POLMCO ROTTION (w, x, y, z) LOWER BRISTOL ROD SLES NOT TO SCLE BTH B2 1EP OF 2 LL DIMENSIONS IN MILLIMETRES PPR DESIGN 1 = MTERIL (LUMINIUM LLOY) SEE PGE 3 THIS DRWING IS MTERIL PPR QUL COPYRIGHTNDTHE PLTING: SEE PGES 3-4 PPR PROPERTY OF TITLE: POLMCO LTD CT6 FEEDTHROUGH ISSUE DCR IT MUST 005 NOT = BE COPIED, CBLE SELING BCKSHELL USED FOR MNUFCTURE RECEPTCLE SSEMBLY OR OTHERWISE NCGE CODE U5792 DISCLOSED PRT WITHOUT NUMBER WEIGHT GENERL TOL PRT FOR NUMBER: UNGROUNDED VERSION: PC4B NX-1-C-U PRIOR WRITTEN CONSENT DRWING NO: LINER +/-0.1MM NGULR +/- 1 PRT OF NUMBER THE COMPNY. ND BTCH CODE WILL BE MRKED PC4B *-*-* ON THE SSEMBLY UNLESS OTHERWISE SPECIFIED C3047 SSY USED ON: PERFORMNCE Tel: +44 (0) DRWING NOT TO SCLE THIS DRWING IS THE PROPERTY OF POLMCO LTD ND MUST NOT BE USED FOR COMMERCIL PURPOSES WITHOUT WRITTEN CONSENT OF THE COMPNY

10 Cat6 Connectors PC4F Feedthrough Jam Nut Receptacle n49,20 46,00 /F - 36,50 TO SUIT H INTERFCE BCKSHELLS 22,60 PRT/BTCH MRK HERE P-0.3L-TS M2 x ,00 /F OPTION X (STNDRD), CT6 FEEDTHROUGH CONNECTOR GROUNDED TO OUTER SHELL DT TRNSFER RTE TESTED TO 1 GIGBIT, CONTCT SLES OFFICE FOR TEST RESULTS SEL - SILICONE ELSTOMER OPTION W OPTION Y OPTION Z SEL - SILICONE ELSTOMER GENERLLY TO THE REQUIREMENTS OF INSULTOR - PPS GL40 UL94, COLOUR BLCK MTES WITH MPHENOL RJFTV POTTING - QSIL 550 UL94V-0 FINISH SEE PGES MTERILS PERFORMNCE VOLTGE RTING 50V DC / 35V C CONTCTS COPPER WITH SELECTIVE GOLD PLTE TEMPERTURE -40 C TO +120 C SHIELDING - NICKEL PLTED BRSS BODY - P, UL94V-0 EXMPLE PRT NUMBER: PC4F NX-1-C GENERLLY TO THE REQUIREMENTS OF PC4F0020 = POLMCO SERIES MTES WITH MPHENOL RJFTV FINISH SEE MTERIL ND PLTING OPTIONS SHEET MTERILS N= X= CONTCTS COPPER WITH SELECTIVE GOLD PLTE LTERNTE KEYING INSERT ROTTION (w, EXMPLE x, y, z) PRT NUMBER: SHIELDING - NICKEL PLTED BRSS 1 = MTERIL (LUMINIUM PC4F NX-1-C LLOY) SEE PGE 3 BODY - P, UL94V-0 PC4F0020 = PLTING: SEE PGES 3-4 POLMCO SERIES N= LTERNTE KEYING INSULTOR - PPS GL40 UL94, COLOUR BLCKPRT NUMBER FOR UNGROUNDED VERSION: PC4F NX-1-C-U X= INSERT ROTTION (w, x, y, z) 1 = SEE MTERIL ND PLTING OPTIONS SHEET POTTING - QSIL 550 UL94V-0 PERFORMNCE SEE MTERIL ND PLTING OPTIONS SHEET PRT NUMBER ND BTCH CODE WILL BE MRKED ON THE SSEMBLY UNLESS OTHERWISE SPECIFIED VOLTGE RTING 50V DC / 35V C PRT NUMBER FOR UNGROUNDED VERSION: PC4F NX-1-C-U TEMPERTURE -40 C TO +120 C DRWING NOT TO SCLE DTE DRWN M.PUL 07/06/2010 3RD NGLE UNLESS OTHERWISE SPECIFIED SLES PROJECTION POLMCO LTD LOWER BRISTOL ROD PGE 1 LL DIMENSIONS IN MILLIMETRES THIS DRWING IS THE PROPERTY OF POLMCO LTD ND MUST NOT BE USED FOR COMMERCIL BTH PURPOSES B2 1EP WITHOUT WRITTEN CONSENT OF THE COMPNY PPR NOT TO SCLE DESIGN 10

11 Cat6 Connectors PC4D Plug Connector ssembly, CT6 CBLE PLUG WITH INTEGRTED CBLE GUIDE, SHIELDING ND CBLE CRIMP GROUNDED TO OUTER SHELL FOR USE WITH WG24/26 CBLE DT TRNSFER RTE TESTED TO 1 GIGBIT PLUG SUPPLIED WITH CONNECTOR SSEMBLY OPTIONL HIGH INTEGRITY GROUNDING RING O RING SEL O RING SEL CBLE SHOWN FOR CLRITY ONLY CBLE SELING RNGE 6,70 `0,50 OPTION X (STNDRD) PRT MRK HERE - 43,00 MX 11 OPTION W OPTION Y OPTION Z PERFORMNCE GENERLLY TO THE REQUIREMENTS OF VOLTGE RTING 50V DC / 35V C MTES WITH MPHENOL RJFTV TEMPERTURE -40 C TO +120 C FINISH SEE PGES MTERILS CONTCTS COPPER WITH SELECTIVE GOLD PLTE SHIELDING - NICKEL PLTED BRSS BODY - P, UL94V-0 EXMPLE PRT NUMBER: PC4D NX-1-C-H SEL - SILICONE ELSTOMER PC4D0024 = POLMCO SERIES LTERNTE KEYING X = INSERT ROTTION (w, x, y, z) GENERLLY TO THE REQUIREMENTS OF EXMPLE PRT NUMBER: MTES WITH MPHENOL RJFTV 1 = MTERIL PC4D0024**-19NX-1-C-H (LUMINIUM LLOY) SEE PGE 3 FINISH SEE MTERIL ND PLTING OPTIONS SHEET PC4D0024 = POLMCO SERIES PLTING: SEE PGES 3-4 MTERILS ** = TERMINTION STYLE E.G. "BT" (OMIT FOR STNDRD) H = HIGH INTEGRITY 19 = GROUNDING (OMIT FOR SHELL STNDRD) SIZE CONTCTS SELECTIVE GOLD PLTING LTERNTE KEYING SHIELDING - NICKEL PLTED BRSS PRT NUMBER FOR X UNGROUNDED = VERSION: PC4D NX-1-C-U INSERT ROTTION (w, x, y, z) BODY - PBT, UL94V-0 1 = SEE MTERIL ND PLTING OPTIONS SHEET PRT NUMBER ND BTCH CODE WILL BE MRKED ON THE SSEMBLY UNLESS OTHERWISE SPECIFIED SEE MTERIL ND PLTING OPTIONS SHEET SEL - SILICONE H = HIGH INTEGRITY GROUNDING (OMIT FOR STNDRD) Tel: +44 (0) DRWING NOT TO SCLE PERFORMNCE PRT DIMENSIONS NUMBER FOR IN MMUNGROUNDED VERSION: PC4D NX-1-C-U VOLTGE RTING 50V DC / 35V C TEMPERTURE -40 C TO +120 C THIS DRWING IS THE PROPERTY OF POLMCO LTD ND MUST NOT BE USED FOR COMMERCIL PURPOSES WITHOUT WRITTEN CONSENT OF THE COMPNY

12 Cat6a Connectors PC4B Feedthrough Receptacle ssembly 36,50 29,36 TYPICL 26,9 TYPICL 21,50 PRT/BTCH MRK HERE 33,50 4, P-0.3L-TS Ø2,00 3,25 -, CT6a (10Gb) FEEDTHROUGH CONNECTOR GROUNDED TO OUTER SHELL GENERLLY TO THE REQUIREMENTS OF SEL - SILICONE ELSTOMER INSULTOR - PPS GL40 UL94, COLOUR BLCK POTTING - QSIL 550 UL94V-0 EXMPLE PRT NUMBER: PC4B N 1 C MTERILS PERFORMNCE PC4B0022 = POLMCO SERIES VOLTGE RTING 50V DC / 35V C CONTCTS COPPER WITH SELECTIVE GOLD PLTE 19 = TEMPERTURE SHELL SIZE -40 C TO +120 C SHIELDING - NICKEL PLTED BRSS KEY RRNGEMENT BODY - PBT, UL94V-0 1 = MTERIL: SEE MTERIL ND PLTING OPTIONS SHEET PLTING: SEE MTERIL ND PLTING OPTIONS SHEET PRT NUMBER FOR UNGROUNDED VERSION, PC4B N-1-C-U GENERLLY TO THE REQUIREMENTS OF EXMPLE PRT NUMBER: PC4B N-1-C PC4B0022 = POLMCO SERIES KEY RRNGEMENT 1 = MTERIL (LUMINIUM LLOY) SEE PGE 3 PLTING: SEE PGES 3-4 MTERILS PRT NUMBER FOR UNGROUNDED VERSION: PC4B N-1-C-U CONTCTS COPPER WITH SELECTIVE GOLD PLTE SHIELDING - NICKEL PLTED BRSS BODY - P, UL94V-0 SEL - SILICONE ELSTOMER INSULTOR - PPS GL40 UL94, COLOUR BLCK POTTING - QSIL 550 UL94V-0 PERFORMNCE VOLTGE RTING 50V DC / 35V C TEMPERTURE -40 C TO +120 C DRWN SLES PPR DESIGN PPR QUL PPR M.PUL DTE 05/01/2011 PRT NUMBER ND BTCH CODE WILL BE MRKED ON THE SSEMBLY UNLESS OTHERWISE SPECIFIED 3RD NGLE PROJECTION POLMCO LTD LOWER BRISTOL ROD NOT TO SCLE DRWING NOT TO SCLE BTH B2 1EP SSY USED ON: /20 UNLESS OTHERWISE SPECIFIED LL DIMENSIONS IN MILLIMETRES THIS DRWING IS THIS DRWING IS THE PROPERTY COPYRIGHTNDTHE OF POLMCO LTD ND MUST NOT BE USED FOR COMMERCIL PURPOSES WITHOUT WRITTEN CONSENT OF THE COMPNY PROPERTY OF TITLE: PGE 1 MTERIL 12

13 Cat6a Connectors PC4F Feedthrough Jam Nut Receptacle 33,50 46,00 /F 22,60 PRT/BTCH MRK HERE n49, P-0.3L-TS Ø2,00-40,00 /F GENERLLY TO THE REQUIREMENTS OF, CT6a (10Gb) FEEDTHROUGH CONNECTOR GROUNDED TO OUTER SHELL SEL - SILICONE ELSTOMER INSULTOR - PPS GL40 UL94, COLOUR BLCK POTTING - QSIL 550 UL94V-0 13 MTERILS CONTCTS COPPER WITH SELECTIVE GOLD PLTE SHIELDING - NICKEL PLTED BRSS BODY - PBT, UL94V-0 GENERLLY TO THE REQUIREMENTS OF MTERILS CONTCTS COPPER WITH SELECTIVE GOLD PLTE SHIELDING - NICKEL PLTED BRSS BODY - P, UL94V-0 Tel: TEMPERTURE C (0)45 TO +120 C DRWN SLES EXMPLE PRT NUMBER: PC4F N 1 C PERFORMNCE PC4F0014 = POLMCO VOLTGE RTING SERIES 50V DC / 35V C 19 = SHELL TEMPERTURE SIZE -40 C TO +120 C KEY RRNGEMENT 1 = MTERIL: SEE MTERIL ND PLTING OPTIONS SHEET PLTING: SEE MTERIL ND PLTING OPTIONS SHEET PRT NUMBER FOR UNGROUNDED VERSION, PC4F N-1-C-U EXMPLE PRT NUMBER: PC4F N-1-C PC4F0014 = POLMCO SERIES KEY RRNGEMENT 1 = MTERIL (LUMINIUM LLOY) SEE PGE 3 PLTING: SEE PGES 3-4 PRT NUMBER FOR UNGROUNDED VERSION: PC4F N-1-C-U SEL - SILICONE ELSTOMER INSULTOR - PPS GL40 UL94, COLOUR BLCK PRT NUMBER ND BTCH CODE WILL BE MRKED ON THE SSEMBLY UNLESS OTHERWISE SPECIFIED POTTING - QSIL 550 UL94V-0 PERFORMNCE VOLTGE RTING 50V DC / 35V C DRWING NOT TO SCLE DTE M.PUL THIS DRWING 05/01/2011 IS THE PROPERTY 3RD OF POLMCO NGLE LTD ND MUST NOT BE USED FOR COMMERCIL WESTON PURPOSES LOCKWITHOUT WRITTEN CONSENT OF THE COMPNY UNLESS OTHERWISE SPECIFIED PROJECTION POLMCO LTD LOWER BRISTOL ROD PGE 1 LL DIMENSIONS IN MILLIMETRES

14 Cat6a Connectors PC4D001 - Plug Connector ssembly Cat6 & Cat6a Tooling Options: See Page 1 ING NO 467 3RD NGLE PROJECTION REMOVE LL SHRP EDGES ND BURRS, CT6a (10Gb) WITH INTEGRTED CBLE GUIDE, SHIELDING ND CBLE CRIMP GROUNDED TO OUTER SHELL UNLESS OPTION "U" IS SPECIFIED (FEEDTHRU ISOLTED FROM OUTER SHELL) FOR USE WITH WG24/26 CBLE PLUG SUPPLIED WITH CONNECTOR SSEMBLY OPTIONL HIGH INTEGRITY GROUNDING RING O RING SEL O RING SEL CBLE SELING RNGE 6,70 `0,50 PRT MRK HERE 43,00 MX - CBLE SHOWN FOR CLRITY ONLY LY TO THE REQUIREMENTS OF RIL ND PLTING OPTIONS SHEET S S SELECTIVE GOLD PLTING G - NICKEL PLTED BRSS T, UL94V-0 ICONE NCE RTING 50V DC / 35V C TURE -40 C TO +120 C DCR NO. DTE PPROVED MTERIL 414 GENERLLY TO THE REQUIREMENTS OF 17/09/2010 SEE BOVE EXMPLE PRT NUMBER: PC4D001-19N-1-C-H PC4D001 = POLMCO SERIES MTERILS PERFORMNCE KEY RRNGEMENT 1 = MTERIL: SEE MTERIL ND PLTING OPTIONS SHEET VOLTGE PLTING: RTING SEE 50V MTERIL DC / 35V ND CPLTING OPTIONS SHEET H = HIGH INTEGRITY GROUNDING (OMIT FOR STNDRD) CONTCTS COPPER WITH SELECTIVE GOLD PLTE TEMPERTURE -40 C TO +120 C SHIELDING - NICKEL PLTED PRT NUMBER BRSS FOR UNGROUNDED VERSION: PC4D001-19N-1-C-U BODY - PBT, UL94V-0 UNLESS OTHERWISE DO NOT SCLE SPECIFIED SEL - SILICONE LL DIMENSIONS IN THIS DRWING MILLIMETRES THIS DRWING IS COPYRIGHT, TOLERNCE ON DIMENSIONS ND TITLE +/-0.1MM THE PROPERTY OF POLMCO LTD. TOLERNCE ON NGLES IT MUST NOT BE COPIED, USED +/- 1 DEGREE FOR MNUFCTURE OR EXMPLE OTHERWISE WEIGHTPRT NUMBER: PC4D001-19N-1-C-H DISCLOSED WITHOUT PRIOR WRITTEN CONSENT OF THE PC4D001 DRW M.PUL POLMCO SERIES COMPNY. KEY RRNGEMENT 1 = MTERIL (LUMINIUM LLOY) SEE PGE 3 PLTING: SEE PGES 3-4 H = HIGH INTEGRITY GROUNDING (OMIT FOR STNDRD) POLMCO LTD PRT NUMBER FOR UNGROUNDED VERSION: PC4D001-19N-1-C-U LOWER BRISTOL ROD BTH B2 1EP CT 6a PLUG CONNECTOR SSEMBLY PRT NOPC4D001-19N-1-C SSY USED ON /26 DRWING NO C1467 PRT NUMBER ND BTCH CODE WILL BE MRKED ON THE SSEMBLY UNLESS OTHERWISE SPECIFIED DRWING NOT TO SCLE THIS DRWING IS THE PROPERTY OF POLMCO LTD ND MUST NOT BE USED FOR COMMERCIL PURPOSES WITHOUT WRITTEN CONSENT OF THE COMPNY 14

15 Cat6a Connectors PC4D001** Plug Connector ssembly for Double Screened pplications Cat6 & Cat6a Tooling Options: See Page 1, CT6a (10Gb) WITH INTEGRTED CBLE GUIDE, SHIELDING ND CBLE CRIMP GROUNDED TO OUTER SHELL FOR USE WITH WG24/26 CBLE, 0,94-1,07Ø OVER INSULTION PLUG SUPPLIED WITH CONNECTOR SSEMBLY OPTIONL HIGH INTEGRITY GROUNDING RING O RING SEL O RING SEL PRT MRK HERE 43,00 MX - SCREEN TERMINTION OPTIONS BT - SUPLLIED WITH BND 91 - SUPPLIED WITH SPRING CBLE SELING RNGE 6,70 `0,50 CBLE SHOWN FOR CLRITY ONLY GENERLLY TO THE REQUIREMENTS OF PLTING: SEE PGES MTERILS: SEE PGE 15 CONTCTS SELECTIVE GOLD PLTING SHIELDING - NICKEL PLTED BRSS BODY - PBT, UL94V-0 SEL - SILICONE PERFORMNCE VOLTGE RTING 50V DC / 35V C TEMPERTURE -40 C TO +120 C 15 GENERLLY TO THE REQUIREMENTS OF FINISH SEE MTERIL ND PLTING OPTIONS SHEET MTERILS SHELL - SEE MTERIL ND PLTING OPTIONS H SHEET = CONTCTS SELECTIVE GOLD PLTING SHIELDING - NICKEL PLTED BRSS BODY - PBT, UL94V-0 SEL - SILICONE PERFORMNCE VOLTGE RTING 50V DC / 35V C TEMPERTURE -40 C TO +120 C Tel: +44 (0)45 DTE DRWN SLES PPR EXMPLE PRT NUMBER PC4D001BT-19N-1-C-H PC4D001 POLMCO SERIES BT = BT - SUPPLIED WITH BND, 91 SUPPLIED WITH SPRING KEY RRNGEMENT, OPTIONS N,, B, C, D, E 1 = MTERIL (LUMINIUM LLOY) SEE PGE 3 PLTING: SEE PGES 3-4 HIGH INTEGRITY GROUNDING (OMIT FOR STNDRD) EX M P LE P R T N U M B ER P C 4D 001B T 19N 1 C H P C 4D 001 P O L M C O S ER IES B T = B T S U P P LIED W ITH B N D, 91 S U P P LIED W ITH S P R IN G K EY R R N G EM EN T, O P TIO N S N,, B, C, D, E 1 = M TER I L S EE M TER I L P L TIN G O P TIO N S S H EET F IN IS H S EE M TER I L P L TIN G O P TIO N S S H EET H = H IG H IN TEG R ITY G R O U N D IN G ( O M IT F O R S T N D R D ) PRT NUMBER ND BTCH CODE WILL BE MRKED ON THE SSEMBLY UNLESS OTHERWISE SPECIFIED DRWING NOT TO SCLE M.PUL 05/01/2011 3RD NGLE UNLESS OTHERWISE SPECIFIED PROJECTION POLMCO LTD LOWER BRISTOL ROD PGE 1 THIS DRWING IS THE PROPERTY OF POLMCO LTD ND MUST NOT BE USED FOR COMMERCIL PURPOSES WITHOUT WRITTEN CONSENT OF LL THE DIMENSIONS COMPNY IN MILLIMETRES JLM 03/12/2010 NOT TO SCLE BTH B2 1EP

16 Cat6a Connectors PC4D Field Plug Connector ssembly (No Tooling Required) CT 6 FIELD PLUG, NO SPECIL TOOLING REQUIRED. WIRING TO EI/TI, 56 EI/TI 56B, PROFINET WIRE SIZE SOLID 0,64 MX WIRE SIZE FLEXIBLE WG22 TO WG26 INSULTION DIMETER 1,6 MX 750 MTING CYCLES PLUG SUPPLIED WITH CONNECTOR SSEMBLY n3,50 MX - OPTIONL CBLE DIMETER CBLE NOT SUPPLIED Ø26,00 PRT MRK HERE 60,00 MX GENERLLY TO THE REQUIREMENTS OF FINISH SEE PGES MTERILS PLUG CONTCTS COPPER WITH SELECTIVE GOLD PLTING HOUSING - ZINC DIECST SEL - SILICONE PERFORMNCE TEMPERTURE -40 C TO +70 C GENERLLY TO THE REQUIREMENTS OF FINISH SEE MTERIL ND PLTING PC4D0023 = POLMCO SERIES OPTIONS SHEET EXMPLE PRT NUMBER PC4D N-1-C MTERILS 10 = SHELL - SEE MTERIL ND PLTING CBLE DIMETER IN MM +/-0,5 OPTIONS 06, 0 ND 10 OPTIONS SHEET KEY RRNGEMENT, OPTIONS N,, B, C, D, E PLUG EXMPLE PRT NUMBER PC4D N 1 C CONTCTS SELECTIVE GOLD 1 = PC4D0023 MTERIL = (LUMINIUM POLMCO SERIES LLOY) SEE PGE 3 PLTING 19 PLTING: = SEE SHELL PGES SIZE 3-4 HOUSING - ZINC DIECST 10 = CBLE DIMETER IN MM +/ 0,5 OPTIONS 06, 0 ND 10 SEL - SILICONE PRT NUMBER FOR UNGROUNDED KEY RRNGEMENT, VERSION: OPTIONS PC4D N-1-C-U N,, B, C, D, E PERFORMNCE 1 = MTERIL SEE MTERIL PLTING OPTIONS SHEET FINISH SEE MTERIL PLTING OPTIONS SHEET TEMPERTURE -40 C TO +70 C PRT NUMBER FOR UNGROUNDED VERSION: PC4D N-1-C-U DRWN SLES PPR DESIGN PPR QUL PPR ISSUE 2 M.PUL DTE 13/12/2010 JLM 14/12/2010 3RD NGLE PROJECTION PRT NUMBER ND BTCH CODE WILL POLMCO BE MRKED ON THE LTD LOWER BRISTOL ROD SSEMBLY BTH UNLESS B2 OTHERWISE 1EP SPECIFIED NOT TO SCLE SSY USED ON: /26 UNLESS OTHERWISE SPECIFIED LL DIMENSIONS IN MILLIMETRES MTERIL THIS DRWING IS DRWING NOT TO SCLE COPYRIGHTNDTHE PROPERTY OF TITLE: POLMCO LTD THIS DRWING DCR IS THE PROPERTY IT MUST NOT OF POLMCO BE COPIED, LTD ND CT MUST 6 NOT BE USED FOR FIELD COMMERCIL PLUG PURPOSES CONNECTOR WITHOUT WRITTEN CONSENT OF THE COMPNY 414 USED FOR MNUFCTURE OR OTHERWISE SSEMBLY PGE 1 NCGE CODE U

17 Series Series J45 Series p Tool p Tool Tool tures tures Cat5 Connectors Plug ssembly Tooling p crimp Crimp tool crimps Tool all contacts ixes p res crimp the tool square crimps all in contacts one action ixes the Features square crimp in one action rimp tool crimps all contacts 1-step crimp tool crimps all contacts s the square crimp in one action and fixes the square crimp in one action Tools and ccessories Tools and ccessories Tools and ccessories Part Number Part Number Part Number Part Number Y-ConTool-11 Y-ConTool-11 Y-ConTool-11 Stripping Tool Stripping Tool tures tripping Tool Features tures stripping Cable tool stripping with adjustable tool with adjustable blades blades stripping tool with adjustable blades res Cable Stripping Tool ripping tool with adjustable blades Part Part Number Y-ConTool-20 Number Part Y-ConTool-20 Number Y-ConTool-20 Part Number Y-ConTool-20 Cable-to-Plug ssembly Tool Features Enables easy assembly when inserting the cable and insert into the plug -to-plug ssembly Tool -to-plug ssembly Tool atures to-plug bles atures easy assembly ssembly when inserting Tool tures cable bles easy and assembly insert into when the plug inserting cable and insert into the plug es easy assembly when inserting ble and insert into the plug Part Number Part Part Number Y-ConTool-30 Number Part Y-ConTool-30 Number Y-ConTool-30 Y-ConTool Tel: +44 (0) THIS DRWING IS THE PROPERTY OF POLMCO LTD ND MUST NOT BE USED FOR COMMERCIL PURPOSES WITHOUT WRITTEN CONSENT OF THE COMPNY

18 Cat6 & Cat6a Connectors Plug ssembly Tooling & Professional Handtool for the assembly of shielded Cat 6 plugs. This is a real One-Step tool: contacts and shield is crimped at the same time. Load Bar Shielded Strain Relief Plug Finished ssembly PLUG PRT NUMBER OUTER CBLE Ø SS / MORE THN 6MM THIS DRWING IS THE PROPERTY OF POLMCO LTD ND MUST NOT BE USED FOR COMMERCIL PURPOSES WITHOUT WRITTEN CONSENT OF THE COMPNY 1

19 Connector Modifications n3,20 THRU w n5,50 X 90 MOD 002 R1 Flange Mount Options for PC420 Series R1 n3,20 THRU MOD 001 n3,20 THRU MOD 001 n3,20 THRU w n5,50 X 90 MOD 002 n3,20 THRU w n5,50 X 90 MOD 002,00) n3,20 M3x0.5 THRU - 6H MOD M3x0.5-6H MOD 003 R1 001 = Ø 3,2 002 = Countersunk 003 = Tapped M3 n3,20 THRU w n5,50 X 90 MOD 002 (9,00) Optional Panel Thickness for PC424 Series M3x0.5-6H MOD 003 (9,00) Jam nut thread length increased to suit various panels wall section. * (9,00) *1,5-3,20 STNDRD PNEL THICKNESS L = OPTIONL PNEL THICKNESS * * Torque Differential Option for PC426 Series The plug coupling nut incorporates a 2:1 torque differential for high vibration applications. POLMCO DRWN SLES PPR DESIGN PPR QUL PPR ISSUE SED ON: UMBER: M.PUL WEIGHT LOWER BRISTOL ROD BTH B2 1EP DTE 24/09/2010 3RD NGLE PROJECTION NOT TO SCLE THIS DRWING IS COPYRIGHTNDTHE PROPERTY OF POLMCO LTD DCR IT MUST NOT BE COPIED, 3963 USED FOR MNUFCTURE OR OTHERWISE DISCLOSED WITHOUT GENERL TOL PRIOR WRITTEN CONSENT LINER +/-0.1MM NGULR +/- 1 OF THE COMPNY. CONNECTOR MODIFICTIONS PC420-17RN-123 PGE 1 OF 1 SSY USED ON: TITLE: UNLESS OTHERWISE SPECIFIED LL DIMENSIONS IN MILLIMETRES UNLESS OTHERWISE SPECIFIED POLMCO MTERIL Integral backshell options utilised where there is insufficient room to LOWER BRISTOL ROD PGE 1 OF 1 LL DIMENSIONS IN MILLIMETRES BTH B2 1EP install a separate backshell options include, 91 & BT series. NCGE CODE U5792 CONNECTOR MODIFICTIONS DRWING NO: PRT NUMBER: Integral Backshells For PC420 / 24 / 26 C3233 PC420-17RN-123 MTERIL NCGE CODE U5792 DRWING NO: C DRWN SLES DRWN PPR SLES DESIGN PPR PPR QUL DESIGN PPR PPR ISSUE QUL M.PUL DTE 3RD NGLE UNLESS OTHERWISE SPECIFIED PROJECTION LOWER BRISTOL ROD PGE 1 OF 1 LL DIMENSIONS IN MILLIMETRES BTH B2 1EP UNLESS OTHERWISE SPECIFIED LOWER BRISTOL ROD PGE MTERIL 1 OF 1 LL DIMENSIONS IN MILLIMETRES BTH B2 1EP COPYRIGHTNDTHE PROPERTY OF TITLE: MTERIL THIS DRWING POLMCO THIS THE DRWING LTDPROPERTY IS OF POLMCO LTD ND MUST NOT BE USED FOR COMMERCIL PURPOSES WITHOUT WRITTEN CONSENT OF THE COMPNY IT MUST COPYRIGHTNDTHE NOT BE COPIED, CONNECTOR MODIFICTIONS USED FOR MNUFCTURE NCGE CODE U /09/2010 DTE 24/09/2010 M.PUL NOT TO 3RD SCLE NGLE PROJECTION Tel: +44 (0) POLMCO THIS DRWING NOT IS TO SCLE DCR 3963 SSY USED ON: POLMCO SSY USED ON: