MICRODOT and NANONICS Connectors

Transcription

1 MIRODOT and NNONIS onnectors

2 MIRODOT and NNONIS onnectors MIRODOT onnectors Disclaimer While Tyco Electronics has made every reasonable effort to ensure the accuracy of the information in this catalog, Tyco Electronics does not guarantee that it is error-free, nor does Tyco Electronics make any other representation, warranty, or guarantee that the information is accurate, correct, reliable or current. Tyco Electronics reserves the right to make any adjustments to the information contained herein at any time without notice. Tyco Electronic expressly disclaims all implied warranties regarding the information contained herein, including but not limited to any implied warranties or merchantability or fitness for a particular purpose. It is recommended that you test any new or replacement product before incorporating into a system. The dimensions in this catalog are for reference purposes only and are subject to change without notice. Dimensions are in inches over [millimeters], unless otherwise specified. lways consult our customer drawings for recommended P board layout and panel cutout dimensions; do not use catalog dimensions. Specifications are subject to change without notice. onsult Tyco Electronics at for latest dimensions and design specifications, or use our global contact list shown on inside back cover. NNONIS onnectors opyright 2001 and 2005 by Tyco Electronics orporation. ll Rights Reserved. OMOMTE, DULOE, JKMTE, LEPR/ON, MR 53, MR 63, MR 73, MIRODOT, NNONIS, and TYO are trademarks. Other products, logos, and ompany names mentioned herein may be trademarks of their respective owners.

3 MIRODOT and NNONIS onnectors Main Table of ontents Microminiature D onnectors MIRODOT Rectangular onnectors ircular onnectors oaxial onnectors DULOE Rectangular onnectors NNONIS ircular onnectors oaxial onnectors Strip onnectors Part Number Index i

4 MIRODOT and NNONIS onnectors Engineering Notes ii

5 MIRODOT onnectors Table of ontents Microdot Introduction Microminiature D onnectors Introduction MK/MD/MDM Series Metal and Plastic Shell onnectors How To Specify MK and MD onnectors ontact rrangements MK Series Metal Shell onnectors MK Series Metal Shell onnectors Panel Mounting utout Dimensions MD Series Plastic Shell onnectors , 12 MD Series Plastic Shell onnectors Panel Mounting utout Dimensions Mounting and oupling Hardware , 15 MK Transition locks RT1 Right ngle ST1 Straight MK ST2 Series Straight Mount P onnectors MDM Series Metal Shell onnectors , 26 MDM Series Metal Shell RF OMOMTE onnectors MDM Series Metal Shell onnectors Panel Mounting utout Dimensions MIL-DTL ross Reference Rectangular onnectors Introduction TWIST Pin ontact Data ME Plastic ME Series Plastic Shell Edgeboard onnectors Technical & Performance Data Mother oard & Daughter oard onnectors How To Specify MEM Metal Shell MEM Series Metal Shell Edgeboard onnectors Performance Data Layout onnector , 44 How To Specify Layout onnector MJ Plastic MJ Series Plastic Shell enter Jackscrew onnectors , & 14 Layout onnectors , 38 & 46 Layout onnectors How To Specify ontact rrangements MJM Metal Shell MJM Series Metal Shell enter Jackscrew onnectors , 48, 49 Technical & Performance Data Plug & Receptacle onnectors , 49 How To Specify

6 MIRODOT onnectors Table of ontents (ontinued) MS.050 [1.27] enterline MS Series Strip onnectors Strip onnectors How To Specify High Density Standard Module (HDSM) onnectors ircular onnectors Introduction , 56 MR 43 General Information Materials and Finishes Service & Performance Data Test Data ontact rrangements Part Number & Ordering Information Polarizing Key Positions Shell onfigurations able lamps, ontacts, Sealing Plugs, Protective overs & Modifications MR 53 General Information Materials and Finishes Service & Performance Data Test Data ontact rrangements Part Number & Ordering Information Polarizing Key Positions Shell onfigurations Test dapters, Protective overs, able lamps & Modifications , 73 MR 63 Performance Data Part Number & Ordering Information Shell onfigurations , 76 able lamps, Protective overs & Modifications MR 43, 53, 63 ontacts & Sealing Plugs MR 43, 53, 63, 73 ssembly Tools MR 73 Service & Performance Data , 83 Part Number & Ordering Information Shell onfigurations , 85 able lamps, ontacts & Sealing Plugs , 86 MQR Series Microminiature ircular onnectors , 88 MT Series Microminiature ircular onnectors , 90

7 MIRODOT onnectors Table of ontents (ontinued) oaxial onnectors Introduction Standard oaxial onnectors Performance Data/Materials Screw-On Series (S) Slide-On Series (SOS) Quick-onnect Series (Q) Twinax Series Triax Series Terminals Module locks aps For Screw-On Jacks and Receptacles Feed Thru dapters, Screw-On N/TN dapters to: Screw-On Series (S) , 111 Slide-On Series (SOS) Quick-onnect (Q) Gold Plated rimp Style oaxial onnectors Performance Data/Materials Screw-On Series ssembly Tools LEPR/ON Ultra Miniature onnectors Performance Data/Materials Screw-On Series Standard Interface , 119 Screw-On Series Locking Interface , 121 Slide-On Series , 123 ssembly Tools N / LEPR/ON dapters , 125 Snap-Lock Series able ssemblies Ordering Instructions Mating Interface hart able cceptance Dimensions Standard oaxial onnectors Gold Plated rimp Style oaxial onnectors , 134 LEPR/ON onnectors Hermetic onnectors oaxial Screw-On, Slide-On Series , 136 3

8 MIRODOT onnectors MIRODOT Introduction MIRODOT onnector products have a fifty-year heritage of leadership in precision design and manufacturing of innovative and cost-effective interconnects. These innovative and costeffective products offer interconnect solutions for a broad range of applications in the erospace, Military, Medical, Instrumentation, ommunications and omputer markets. The MIRODOT reputation for hands-on experienc and outstanding technical support is now enhanced as part of Tyco Electronics orporation. From standard Mil-Spec configurations to custom designs, we have the Micro-D, subminiature and ultra-miniature coaxial, custom hermetic and space-related cylindrical connectors to meet your need, whether it is build-toprint assemblies, or total turn-key assembly program management. MIRODOT connectors have met the rigorous demands imposed in manned space flight, military and commercial satellites, critical medical applications, and geophysical exploration. 4

9 Microminiature D onnectors Product Facts Designed for both military and commercial applications Low engaging force is achieved by the manner in which Twist Pin ontacts are designed The metal shell and plastic shell are available with solder cup and solid or stranded wire terminations Mating force maximum is 10 oz. [2.78N] times the number of contacts Durability No known mechanical or electrical issues detrimental to the function of the connectors after 500 cycles of mating and unmating urrent Rating 3 amps max per contact Microminiature D onnectors Microminiature D onnectors 1 MIRODOT onnectors MK and MD High Density Microminiature D onnectors described in this catalog comprise a complete connector system, which is adaptable to a numerous variety of form factors. Low engaging force is achieved by the manner in which the twist pin contacts are designed. y constructing the male contact as a breathing helical spring, electrical contact is achieved at many points around the periphery of the pin bundle rather than at a few discrete points, as in conventional pin designs. Normal twist pin engagement force is 6 oz. [1.67N] typically and 8 oz. [2.22N] maximum. The low force twist pins exhibit an engaging force of 4 oz. [1.11N] typically and 5 oz. [1.39N] maximum. Low force twist pins are standard in MIL-DTL configurations of MK and MD connectors and may be supplied as an option in all other configurations. The MK and MD Series of connectors featured in this catalog are designed to meet the applicable requirements of MlL-DTL-83513, for intermateability, interchangeability, and performance. Designed for both military and commercial applications, the MK s and MD s are especially well suited for use in miniaturized airborne and space electronics, computers, and test equipment. The metal shell MK s and plastic shell MD s are available with solder cup, and solid or stranded wire terminations. MK transition blocks are standard for printed circuit board mounting. ustom termination configurations for both MK and MD can be accommodated. Micro D s are also supplied in wired harness assemblies. 5

10 Microminiature D onnectors MK/MD/MDM Series Metal and Plastic Shell onnectors Technical and Performance Data (pplicable to MK, MD and MDM unless otherwise noted) Electrical ontacts Pin 24 WG twist pin, Socket 24 WG precision machined barrel, Wire Range 24 WG to 30 WG solid and stranded. ontact Resistance (voltage drop) 25 millivolts max. at 3 amps, 77 ± 7.4 F [25 ± 3 ]. urrent Rating 3 amps max. per contact. Dielectric Withstanding Voltage Volts RMS 60 Hz at room ambient. t sea level 600V solder pots, 750V wire terminations & transition blocks. t 70,000 ft. [21,336 m] 150V solder pots, 200V wire terminations & transition blocks. Insulation Resistance 5,000 megohms min. (@ 500 VD) at ambient room temperature. Magnetic Permeability 2 mu max. Mechanical ontact Spacing.050 [1.27mm] centers. ontact Engagement & Separation Standard contact engaging force is 6.0 oz. [1.67N] (8.0 oz. [2.22N] max.). Separation force is 0.5 [.14N] oz. min. Mating Force Maximum alculated as 10 oz. times the number of contacts. Environmental Temperature Range -67 F to 257 F [-55 to +125 ] for MK/MD, -67 F to 302 F [-55 to +150 ] for MDM. Vibration No discontinuity in excess of 1 µ sec. when tested in accordance with MIL-STD-1344, Method 2005, test ondition IV. Solderability onnectors shall pass the test requirements of MIL-STD- 202, Method 208 Shock No discontinuity in excess of 1 µ sec. when tested in accordance with MIL-STD-1344, Method 2004, test ondition E. Durability No mechanical or electrical defects detrimental to the function of the connectors after 500 cycles of mating and unmating. Humidity fter exposure to humidity as specified by MIL-STD-1344, Method 1002, Type II, IR shall be 1 megohm min. following step 7a of Method 1002 and 1000 megohms min. after 24 hours of conditioning per Method Salt Spray onnectors shall meet the performance requirements of contact resistance, mating and unmating forces, and contact retention after being subjected to the 48-hour 5% solution salt spray test per MIL-STD-1344, Method 1001, ondition. Fluid Immersion Unmated connectors after being fully immersed in one of the following fluids, for the prescribed time, will mate at a force of 10 oz. [2.78N] times the number of contacts or less: Perchloroethylene, 2 hours; Lubricating oil per MIL-L-23699, 20 hours. Insert Retention Inserts will withstand a 50 lb. [34N/cm 2 ] per square inch load in either direction. rimp Termination Tensile Strength (Unassembled contacts with crimped stranded wire terminations) Wires will not pull out of contacts when the following axial loads are applied: 24 WG, 5 lbs. [22.24N]; 26 WG, 4 lbs. [17.79N]; 28 WG, 3 lbs. [13.34N] Outgassing When tested in accordance with SP-R-0022, Total Mass Loss (TML) shall be less than 1.0% and Volatile ondensable Material (VM) shall be less than 0.1% of the original specimen. Materials and Finishes ontacts opper alloy plated with [.00127] gold over copper flash per MIL-G Type II. Hardware see pages 14 and 15. MK-Metal Shell Insulator Liquid crystal polymer (LP) per STM D5138, or Polyphenylene sulfide GST-40F per STM D5927 or MIL-M Interfacial Seal Fluorosilicone Rubber per MIL-R (socket side only) ody Shell luminum alloy-high grade plated admium per QQ-P-416 Nickel, electroless per MS 2404 Transition lock Shell Liquid crystal polymer (LP) per STM D5138, or Polyphenylene sulfide GST-40F per STM D5927 or MIL-M Potting Material Epoxy, lack MD-Plastic Shell Insulator/ody Polyester, glass filled per MIL-M-24519, Liquid crystal polymer (LP) per STM D5138, or Polyphenylene sulfide GST-40F per STM D5927 or MIL-M Wire Terminations Solid copper per QQ-W-343 gold plated per MIL-G Stranded TEFLON insulated per MIL-W Stranded TEFLON insulated per MIL-W /11, /33 Solid copper per QQ-W-343, solder dipped (Transition block) MDM-Metal Shell Insulator Diallyl Phthalate per MIL- M-14, Type SDG-F ody Shell luminum alloy high grade, nickel plated Twist Pin, Pin and Socket ontacts The contact spring member normally found in socket contacts has been eliminated by creating a breathing helical spring principle on the pin contact smaller, more durable contacts can be manufactured economically. Wire range WG solid & stranded. MIL-DTL Only the descriptive legend in bold italic is applicable to current MIL-DTL configurations; MIL-DTL-83513/1 through /4 MK metal shell; MIL-DTL-83513/6 through /9 MD plastic shell. In addition, MIL-DTL solid copper wire termination is specified 25 WG, 0.5; and 1.0 [25.4] lengths only and stranded insulated wire termination is specified 26 WG, 18.0 [457.2] and 36.0 [914.4] lead lengths only. Hardware for MIL-DTL configurations is specified separately by the M83513/5-XX designation. M83513/1 through /4 and /6 through /9 specify no hardware (). Mounting/mating hardware is shown on page 14 with the applicable military nomenclature. The MIRODOT catalog part number for a MIL-DTL configuration may be constructed to include the desired hardware. See pages for M83513/ cross reference. 6

11 Microminiature D onnectors Metal Shell onnector Series Shell Finish 1 admium, lear 2 admium, Yellow hromate N1 Nickel, Electroless Hardware (See Pages 14 and 15) No Hardware F Float ushing K, KM Jackscrew, Slotted Head, High Profile (9-51) H, HM Jackscrew, Slotted Head, High Profile (100) L, LM Jackscrew, Slotted Head, Low Profile (9-51) J, JM Jackscrew, Slotted Head, Low Profile (100) Q, QM Jackscrew, llen Head, High Profile (9-51) T, TM Jackscrew, llen Head, High Profile (100) R, RM Jackscrew, llen Head, Low Profile (9-51) N, NM Jackscrew, llen Head, Low Profile (100) P Jackpost ssembly (9-51) S Jackpost ssembly (100) X Lockscrew, Slotted Head Y Lockscrew, llen Head Z lip and Key (lip Mount Only) Layout 9, 15, 21, 25, 31, 37, 51, 100 See contact arrangement How To Specify MK and MD onnectors S Solder pots 26 WG max. X Special, not described by legend. MK P Lead Length in Inches (Min.) Insulation olor or Finish 1 ll white wire 6 are (unfinished) 2 ll yellow wire 7 olor coded per MIL-STD-681, System 1 3 ll gray wire 8 Special color code 4 Gold plated 9 10 Solid color repeating per M Tin dipped gold plated Wire Type Type E, 7 strand Per Type ET, 7 strand MIL-W-16878{ Type E, 19 strand D Type ET, 19 strand F 7 strand per MIL-W-22759/11 (28 WG only) G 19 strand per MIL /11 (26 WG only), 24 WG L opper, Solid (25 WG only) Q Stranded per MIL-W-22759/33 (26 WG only) Wire Size 4 24 WG 5 25 WG 6 26 WG 8 28 WG 0 30 WG Microminiature D onnectors 1 ontact Type P Pin (Plug) S Socket (Receptacle) Plastic Shell S Solder pots 26 WG max. X Special Does not fit description below. onnector Series MD R3 37 P Lead Length in Inches (Min.) Insulator Type/Material G2 lip Mount, polyester, natural G3 Screw Mount, polyester, natural,.093 Flg. R2 lip Mount, Ryton R3 Screw Mount Liquid rystal Polymer or Polyphenylene Sulfide Hardware (See Pages 14 and 15) No Hardware F Float ushing K, KM Jackscrew, Slotted Head, High Profile L, LM Jackscrew, Slotted Head, Low Profile Q, QM Jackscrew, llen Head, High Profile R, RM Jackscrew, llen Head, Low Profile P Jackpost ssembly X Lockscrew, Slotted Head Y Lockscrew, llen Head Z lip and Key (lip Mount Only) Layout 9, 15, 21, 25, 31, 37, 51 See contact arrangement Insulation olor or Finish 1 ll white wire 6 are (unfinished) 2 ll yellow wire 7 olor coded per MIL-STD-681, System 1 3 ll gray wire 8 Special color code 4 Gold plated 9 10 Solid color repeating per M Tin dipped gold plated Wire Type Type E, 7 strand Type ET, 7 strand Per MIL-W-16878{ Type E, 19 strand D Type ET, 19 strand F 7 strand per MIL-W-22759/11 (28 WG only) G 19 strand per MIL /11 (26 WG only), 24 WG L opper, Solid (25 WG only) Q Stranded per MIL-W-22759/33 (26 WG only) Wire Size 4 24 WG 5 25 WG 6 26 WG 8 28 WG 0 30 WG ontact Type P Pin (Plug) S Socket (Receptacle) Note: Items in bold italic are qualified to MIL-DTL

12 Microminiature D onnectors ontact rrangements Face View of Pin Insert (Socket Side is Mirror Image) ontacts 15 ontacts 21 ontacts ontacts ontacts (MDM Only) ontacts ontacts ontacts ontacts (MK Only) 100 Note: MK metal shells are not designed to intermate or interchange with MD plastic shells. If metal/plastic intermating is desired, use MDM Series Metal Shell on pages 25 and 26 with MD Series Plastic Shell on page 11. 8

13 Microminiature D onnectors MK Series Metal Shell onnectors Dimensions per MIL-DTL Two Mtg. Holes Ø.092±.004(9-51 ) [2.34±0.10] Ø [ ] (100 ) F ontact #1 Pin E Microminiature D onnectors.183±.003 [4.65±0.08] rimp or Solder Plug (Pin side).406±.010 [10.31±0.25] Pin.093±.005 [2.36±0.13] Pin D 1 otw Mtg. Holes Ø.092±.004 (9-51 ) [2.34±0.10] F ontact #1 Ø (100 ) [ ] Socket E.195±.003 [4.95±0.08] rimp or Solder Receptacle (Socket side).419±.010 [10.64±0.25] Socket.093±.005 [2.36±0.13] Socket D Part Number ±.010 [.254] Max [.254] [.457] D Max E ±.010 [.254] F ± 005 [.127] MK**- 9P*** MK**- 9S*** MK**- 15P*** MK**- 15S*** MK**- 21P*** MK**- 21S*** MK**- 25P*** MK**- 25S*** MK**- 31P*** MK**- 31S*** MK**- 37P*** MK**- 37S*** MK**- 51P*** MK**- 51S*** MK**- 100P*** MK**- 100S*** P = Pin, S = Socket 9

14 Microminiature D onnectors MK Series Metal Shell onnectors Panel Mounting utout Dimensions Panel Mounting Dimensions MK.200 [5.08].395 [10.03].300 [7.62] Plug and Receptacle Rear Mounted Plug and Receptacle Front Mounted Plug Front Mounted Receptacle Rear Mounted Panel utout Dimensions MK.095 [2.41] Full Radius (Typ.) 9-51 Full Radius (Typ.).122 [3.10].122 [3.10].095 [2.41] R Plcs [ ] Figure 1 Front Mounting 9-51 Figure 2 Rear Mounting 1.810/1.805 [45.98/45.85] [36.83/36.73] Front Mounting 1.810/1.805 [45.98/45.85].015 Max. R [.381] Typ. 116 Typ. Full Radius (Typ.).369/.364 [9.37/9.24].015 R Max. [.381] Typ. Number of Fig [.102] [.102] [.127] ontacts.000 [.000].000 [.000].000 [.000] /.398 [10.24/10.11] Full Radius (Typ.) [38.51/38.40].055 Max. R [1.40] Typ. Rear Mounting 10

15 Microminiature D onnectors MD Series Plastic Shell onnectors Screw Mount Dimensions Per MIL-DTL Two Mtg. Holes Ø.092±.004 [2.34±.10] F ontact #1 Pin E.199±.005 [5.05±.13] rimp or Solder Microminiature D onnectors Plug (Pin side).395/.360 [10.0 3/9.14] Pin.094±.006 [2.39±0.15] Pin D 1 Two Mtg. Holes Ø.092±.004 [2.34±0.10] F ontact #1 Socket E.180±.005 [4.57±0.13] rimp or Solder Receptacle (Socket side) Liquid rystal Polymer or Polyphenylene Sulfide MDR3* per MIL-DTL /.340 [9.52/8.64] Socket.094±.006 [2.39±0.15] Socket Note: MD Plastic Screw Mount Series is intermateable with MDM Metal Series onnectors (Pages 25 and 26). D Part Number MD**- 9P*** MD**- 9S*** MD**- 15P*** MD**- 15S*** MD**- 21P*** MD**- 21S*** MD**- 25P*** MD**- 25S*** MD**- 31P*** MD**- 31S*** MD**- 37P*** MD**- 37S*** MD**- 51P*** MD**- 51S*** E F vg. Weight ±.010 [.254] Max [.254] D Max lbs. ± 5% [.457] ±.010 [.254] ± 005 [.127] [grams] P = Pin, S = Socket Note: Weight given is with.500 [12.7] uninsulated, solid, 24 WG gold plated copper pigtails. *See How to Specify for description, on page 7. 11

16 Microminiature D onnectors MD Series Plastic Shell onnectors (ontinued) lip Mount MD.093 ±.003 [2.44/2.29].019 [.483] ontact #1 Pin E.199 [5.05] rimp or Solder.395/.360 [10.03/9.14] Pin Pin Plug (Pin side).060 [1.52] D.093 ±.003 [2.44/2.29].019 [.483] Socket ontact #1 E.180 [4.57] rimp or Solder Receptacle (Socket side) Note: lip Mount not covered by current issue of MIL-DTL /.340 [9.52/8.64] Socket.060 [1.52] Socket D Part Number ±.005 [.127] D E vg. Weight Max. ±.010 [.254] ±.010 [.254] ±.005 [.127] lbs. ± 5% [grams] MD**- 9P*** MD**- 9S*** MD**- 15P*** MD**- 15S*** MD**- 21P*** MD**- 21S*** MD**- 25P*** MD**- 25S*** MD**- 31P*** MD**- 31S*** MD**- 37P*** MD**- 37S*** MD**- 51P*** MD**- 51S*** P = Pin, S = Socket Note: Weight given is with.500 [12.7] uninsulated, solid, 24 WG gold plated copper pigtails. *See How to Specify for description, on page 7. 12

17 Microminiature D onnectors Panel Mounting Dimensions MD lip Mount MD Series Plastic Shell onnectors Panel Mounting utout Dimensions.200±.005 [5.08±0.13] Screw Mount.200±.005 [5.08±0.13] Microminiature D onnectors Plug and Receptacle Rear Mounted.330±.005 [8.38±0.13] Plug and Receptacle Rear Mounted.395±.005 [10.03±0.13] 1 Plug and Receptacle Front Mounted Plug and Receptacle Front Mounted.265±.005 [6.73±0.13].300±.005 [7.62±0.13] Plug Front Mounted Receptacle Rear Mounted Plug Front Mounted Receptacle Rear Mounted Panel utout Dimensions MD lip Mounting R.015 Max. [.381] Typ. Front Figure 1 R.015 Max. [.381] Typ. Rear Figure 3 Notes: Front mounting preferred [ ] Full Radius (Typ.).089 [2.26] Full Radius (Typ.) Screw Mounting Front Figure R [ ] Rear Figure 4 R.015 [.381] Max. Typ. 116 Typ. Number of Fig [.102] [.102] [.127] ontacts.000 [.000].000 [.000].000 [.000] [11.13].177 [4.50] [10.46].177 [4.50].570 [14.48] [11.13].222 [5.64] [9.75].222 [5.64].570 [14.48] [14.93].177 [4.50] [14.27].177 [4.50].720 [18.29] [14.93].222 [5.64] [13.56].222 [5.64].720 [18.29] [18.75].177 [4.50] [18.08].177 [4.50].870 [22.10] [18.75].222 [5.64] [17.37].222 [5.64].870 [22.10] [21.29].177 [4.50] [20.62].177 [4.50].970 [24.64] [21.29].222 [5.64] [19.91].222 [5.64].970 [24.64] [25.10].177 [4.50] [24.43].177 [4.50] [28.45] [25.10].222 [5.64] [23.72].222 [5.64] [28.45] [28.91].177 [4.50] [28.24].177 [4.50] [32.26] [28.91].222 [5.64] [27.53].222 [5.64] [32.26] [27.64].224 [5.69] [26.97].224 [5.69] [30.99] [27.64].264 [6.71] [26.26].264 [6.71] [30.99] 13

18 Microminiature D onnectors Mounting and oupling Hardware 14 For Screw Mount MK, MD and MDM 9-51 ontacts Slot Head 9-51 ontacts 1/16" llen Head 100 ontacts Slot Head 100 ontacts 1/16" llen Head (K) (KM) Jackscrew Retaining Ring UN-2 [2.18] (Q) (QM) Ø.156 Max. [3.96] Over Knurl.600 [15.24] Part Number Jackscrew ssembly High Profile (K) M83513/5-06 (KM) S Jackscrew Retaining Ring UN-2 [2.18] (H) (HM).853 ±.015 [21.67 ± 0.38].600 [15.24].853 ±.015 [21.67 ± 0.38] Part Number Jackscrew ssembly High Profile (Q) M83513/5-03 (QM) S Jackscrew Retaining Ring UN-2 [2.84] (T) (TM) (L) (LM) (R) (RM) Ø.156 Max. [3.96] Over Knurl.585 [14.86] Part Number Jackscrew ssembly High Profile (H) M83513/5-16 (HM) S Jackscrew Retaining Ring UN-2 [2.84] (J) (JM) Ø.200 Max. [3.96] Over Knurl.585 [14.86] Part Number Jackscrew ssembly High Profile (T) M83513/5-13 (TM) S Max. [23.37] (N) (NM) Ø.200 Max. [3.96] Over Knurl.920 Max. [23.37] Ø.125 [3.18] Jackscrew Retaining Ring UN-2 [2.18].098 [2.29] [ ] Part Number Jackscrew ssembly Low Profile (L) M83513/5-05 (LM) S Ø.125 [3.18] Jackscrew Retaining Ring UN-2 [2.18].098 [2.29] [ ] Part Number Jackscrew ssembly Low Profile (R) M83513/5-02 (RM) S Ø.187 [4.75] Jackscrew Retaining Ring UN-2 [2.84].100 [2.54].415 Max. [10.54] Part Number Jackscrew ssembly Low Profile (J) M83513/5-15 (JM) S Ø.187 [4.75] Jackscrew Retaining Ring UN-2 [2.84].100 [2.54].415 Max. [10.54] Part Number Jackscrew ssembly Low Profile (N) M83513/5-12 (NM) S (P).125 Hex. [3.18] UN-2 [2.18] ushing Lockwasher Hex Nut UN-2 [2.18].187 [4.75].475 [12.07] Part Number Jackpost ssembly (P) S M83513/5-07 P mates with K,KM, L,LM, Q,QM and R,RM Jackscrew ssemblies. Notes: 1. Jackpost ssemblies will accommodate.094 [2.39] max. thickness panel. 2. Letter(s) in parentheses is to assist in ordering hardware with the connector (See How To Specify page 7). 3. Single letters (e.g. K) designate hardware kits (2 pcs. per kit) that meets M83513/05 requirements except the material is 303 stainless steel, passivated. 4. dd M suffix (e.g. KM) to designate hardware that meets all M83513/05 requirements. Material is corrosion resistant steel, non-magnetic, 125,000 PSI tensile strength minimum (pplies to jackscrews only). 5. Non-MIL hardware ordered separately should be ordered in pairs; i.e. 2 pcs. P/N per connector half. 6. Items in bold italic are qualified to MIL-DTL (S).187 Hex. [4.75] UN-2 [2.84] ushing Lockwasher Hex Nut UN-2 [2.84].185 Max. [4.70].475 [12.07] Part Number Jackpost ssembly (S) S M83513/5-17 S mates with H,HM, J,JM, T,TM and N,NM Jackscrew ssemblies.

19 Microminiature D onnectors For Screw Mount MK, MD and MDM (ontinued) Mounting and oupling Hardware (ontinued) Slot Head (X) Ø.125 [3.18] Lockscrew Retaining lip un-2 [2.18].075 [1.91] Part Number Lockscrew ssembly /16" llen Head (Y) Ø.125 [3.18] Lockscrew Retaining lip un-2 [2.18].075 [1.91] Part Number Lockscrew ssembly ±.010 [8.71 ± 0.25] Microminiature D onnectors 1 For lip Mount MD (Z).600 [15.24].356 [9.04] Part Number Mounting Key and lip P/N (2 Required) For Float Mount MK, MD and MDM (F) Washer ushing Float Mount ushing (Factory Installed) Notes: 1. Jackpost ssemblies will accommodate.094 [2.39] max. thickness panel. 2. Letter(s) in parentheses is to assist in ordering hardware with the connector (See How To Specify page 7). 3. Hardware ordered separately should be ordered in pairs; i.e. 2 pcs. P/N per connector half. 15

20 Microminiature D onnectors MK Transition locks RT1 Right-ngle Termination onfiguration Optional Jackpost (2 Plcs.) For 9 Thru 51: UN-2 For 100: UN-2 D Mounting Surface MIL-DTL-83513/10 through /21 configurations. 90 Lo Profile termination configurations. See pages for M83513 cross references. ontact #1 (Socket onnectors).190 Max. [4.83] (Sizes 9-51).185 Max. [4.70] (Size 100 only).109 ±.015 [2.77 ±0.39] ontact #1 (Pin onnectors) E F G E F G Mounting Surface.096±.003 Dia. [2.44±0.08] Typ. Mounting Surface 9, 15, 21 & 25 ontacts 31, 37, 51 & 100 ontacts H.096±.003 Dia. [2.44±0.08] Typ..125±.003 Dia. [3.18±0.08] Typ. (Size 100 Only) How To Specify MK 2 P 37 P RT1 Right ngle Termination (Solder Dipped) RT1 w/.109 Leads RT1 w/.140 Leads RT1 w/.172 Leads ontact Type S = STD Socket P = STD Pin Layout 9, 15, 21, 25, 31, 37, 51 and 100 Hardware P = Jackpost (9-51) = No Hardware S = (100) Shell Finish 2 = admium, Yellow hromate N1 = Nickel, Electroless onnector Series (See page 9) 16 Notes: 1. For terminal identification see page Grid pattern for all configurations is.100 x.100 [2.54 x 2.54]. 3. Lead lengths shown are for RT1. 4. Items in bold italic are qualified to MIL-DTL

21 Microminiature D onnectors RT1 Right-ngle Termination onfiguration (ontinued) Part Number MK-**- *- MK-**- *- 9PRT1 9SRT1 MK-**- *- 15PRT1 MK-**- *- 15SRT1 MK-**- *- 21PRT1 MK-**- *- 21SRT1 MK-**- *- 25PRT1 MK-**- *- 25SRT1 MK-**- *- 31PRT1 MK-**- *- 31SRT1 MK-**- *- 37PRT1 MK-**- *- 37SRT1 MK-**- *- 51PRT1 MK-**- *- 51SRT1 MK-**- *- 100PRT1 MK-**- *- 100SRT1 P = Pin, S = Socket MK Transition locks (ontinued) D E F G H Max. ± 005 [.127] Max. Max. Max [.254] [.254] Max Microminiature D onnectors 1 Note: Items in bold italic are qualified to MIL-DTL

22 Microminiature D onnectors MK Transition locks (ontinued) RT1 Right-ngle Termination onfiguration (ontinued) View is from mounting surface of connector. Plug configuration shown. For receptacle, use mirror image. (Except 100 contacts).100 [2.54] Typ..050 Typ. L [1.27] [2.11].566 [14.38] Ref. 9 ontacts.020 [0.51].100 [2.54] Typ..050 Typ. L [1.27].108 [2.74] [18.19] Ref. 15 ontacts.020 [0.51].100 [2.54] Typ..050 Typ. [1.27] L.020 [0.51] [22.00] Ref. 21 ontacts.083 [2.11].100 [2.54] Typ. L Typ. [1.27].083 [2.11].050 Typ. [1.27].100 Typ. [2.54].158 L [4.01] [2.54] Typ..050 Typ. [1.27] [0.51] [24.54] Ref [28.35] Ref. 25 ontacts L.020 [0.51].100 Typ. [2.54] L [4.65] [32.16] Ref [30.89] Ref. 37 ontacts.050 Typ. [1.27] 31 ontacts 51 ontacts.020 [0.51].050 [1.27].108 [2.74] [45.72] Ref Typ. [6.99] Ref. [2.54] Ref. L.050 Typ. [1.27] Ref [45.72] Ref Typ. [6.99] Ref. [2.54] Ref..050 Typ. L [1.27] Ref [2.54] Typ [2.54] Ref [0.64] Ref..100 [2.54] Ref..025 [0.64] Ref..100 [2.54] Ref. 100 ontacts (Socket onnector) Socket #1 Ref. (Receptacle onnector) 100 ontacts (Pin onnector) Pin #1 Ref. (Plug onnector) 18

23 Microminiature D onnectors MK Transition locks (ontinued) ST1 Straight Termination onfiguration MIL-DTL-83513/22 through /27 configurations. 180 Lo Profile termination configurations. See page 35 for M83513 cross references. ontact #1 (Pin onnector) F.190 Max. (Sizes 9-51) [4.83].185 Max. (Size100 only) [4.70] D E ontact #1 (Socket onnector).096±.003 Dia. Typ. [2.44±.076] (For Size 9 Thru 51).125±.003 Dia. Typ. [3.18±.076] (For Size 100 Only) Optional Jackpost (2 Plcs.) For 9 Thru 51: UN-2 For 100: UN-2 Microminiature D onnectors [9.02] Max. [13.97] Max. (Sizes 9-51) (Size100 only).165 [4.20] Max. (Sizes 9-51).303 Max. (Size 100 only) [7.70].100 [2.54] Typ..050 [1.27] Typ..109 ±.015 [2.77 ±0.39] (Lead Length For ST1 Shown) Lead #1 (Pin onnector) Lead #1 (Socket onnector) How To Specify MK 2 P 37 P ST1 Straight Termination (Solder Dipped) ST1 w/.109 Leads ST1 w/.140 Leads ST1 w/.172 Leads ontact Type S = STD Socket P = STD Pin Layout 9, 15, 21, 25, 31, 37, 51 and 100 Hardware P = Jackpost (9-51) = No Hardware S = (100) Shell Finish 2 = admium, Yellow hromate N1 = Nickel, Electroless onnector Series (See page 9) Notes: 1. For terminal identification see page Grid pattern for all configurations is.100 x.100 [2.54 x 2.54]. 3. Lead lengths shown are for ST1. 4. Items in bold italic are qualified to MIL-DTL

24 Microminiature D onnectors MK Transition locks (ontinued) ST1 Straight Termination onfiguration (ontinued) Part Number MK-**- *- 9PST1 MK-**- *- 9SST1 MK-**- *- 15PST1 MK-**- *- 15SST1 MK-**- *- 21PST1 MK-**- *- 21SST1 MK-**- *- 25PST1 MK-**- *- 25SST1 MK-**- *- 31PST1 MK-**- *- 31SST1 MK-**- *- 37PST1 MK-**- *- 37SST1 MK-**- *- 51PST1 MK-**- *- 51SST1 MK-**- *- 100PST1 MK-**- *- 100SST1 D E F Max. ±.007 [.178] ±.005 [.127] Max. Max. Max P = Pin, S = Socket 20 Note: Items in bold italic are qualified to MIL-DTL

25 Microminiature D onnectors ST1 Straight Termination onfiguration (ontinued) View is from mounting surface of connector. Plug configuration shown. For receptacle, use mirror image. MK Transition locks (ontinued) Microminiature D onnectors.050 [1.27].375 [9.53].100 [2.54] Typ. L.050 Typ. 6 9 [1.27] ontacts.050 [1.27].150 [3.81].100 [2.54] Typ. L [1.27] Typ ontacts [1.27].100 [2.54] Typ. L.050 Typ [1.27] [1.27] L [2.54] Typ..050 [1.27] Typ..225 [5.72] 15 ontacts.150 [3.81] 37 ontacts.050 [1.27].100 [2.54] Typ. L [1.27] Typ [5.72] 21 ontacts.100 [2.54].150 [3.81].100 [2.54] Typ. L [1.27] Typ ontacts.050 [1.27].100 [2.54] Typ..050 L [1.27] Typ [1.27].100 [2.54] Typ. L.050 [1.27] Typ [3.81] 25 ontacts.150 [3.81] ontacts Socket #1 Ref. (Receptacle onnector) Pin #1 Ref. (Plug onnector) 21

26 Microminiature D onnectors MK ST2 Series Straight Mount P onnectors MK with actus end Termination.308 [7.83] Max. Pin ontact # UN-2 Thd. Opt. Jackpost 2 Plcs..190 [4.83] Max..182 ±.004 [4.62 ±0.10] Meets MIL-DTL Performance requirements Single metal shell with no Transition lock Low profile and light weight.100 [2.54] x.075 [1.91] grid pattern Design allows lower cost construction.400 Max. [10.16].210 ±.02 [5.33 ±0.5].225 [5.72] Ref. Metal Mounting Surface Pin 2-56 Thd. Studs. Opt. #25 WG, opper, Hard, Gold Plated, Solder Dipped.075 [1.91] Typ..100 [2.54] Typ..075 [1.91] Typ..050 [1.27] Typ..025 [0.64] Typ..038 [0.97] Typ..109 [2.76] Min..160 [4.06] Min..308 [7.83] Max. Socket ontact # UN-2 Thd. Opt. Jackpost 2 Plcs..190 [4.83] Max..195 ±.003 [4.95 ±0.08].400 Max. [10.16] Socket.109 [2.76] Min..160 [4.06] Min Thd. Studs. Opt..210 ±.02 [5.33 ±0.5].225 [5.72] Ref. #25 WG, opper, Hard, Gold Plated, Solder Dipped.075 [1.91] Typ. Metal Mounting Surface.100 [2.54] Typ..075 [1.91] Typ..050 [1.27] Typ..025 [0.64] Typ..038 [0.97] Typ. 22

27 Microminiature D onnectors MK ST2 Series Straight Mount P onnectors (ontinued) Part Number MK-**-*- 9 PST2 MK-**-*- 9 SST2 MK-**-*- 15 PST2 MK-**-*- 15 SST2 MK-**-*- 21 PST2 MK-**-*- 21 SST2 MK-**-*- 25 PST2 MK-**-*- 25 SST2 MK-**-*- 31 PST2 MK-**-*- 31 SST2 MK-**-*- 37 PST2 MK-**-*- 37 SST2 Max. ±.005 Max Microminiature D onnectors 1 How To Specify MK 2 P 37 P ST2 Straight Termination ontact Type S = Standard Socket P = Standard Pin Layout 9, 15, 21, 25, 31, 37 Hardware P = Jackpost (2-56 THD) = No Hardware Shell Finish 2 = admium, Yellow hromate N1 = Nickel, Electroless onnector Series (See Page 9) 23

28 Microminiature D onnectors MK ST2 Series Straight Mount P onnectors (ontinued) View is of mounting surface of pin connector View is of mounting surface of socket connector L L Size [4.65] Size [4.65] L L Size [4.65] Size [4.65] L L Size [4.65] Size [4.65] L L Size [4.65] Size [4.65] L L Size [4.65] L Size [4.65] L Size [4.65] Size [4.65] Pin #1 Ref. (Plug onnector) Socket #1 Ref. (Receptacle onnector) 24

29 Microminiature D onnectors MDM Series Metal Shell onnectors Technical & Performance Data Performance ontact Resistance The average mated contact resistance is 4 milliohms, with a maximum value of 8 milliohms, using standard #24 solid copper leads when measured directly behind the crimp joints of the mated pin and socket contacts. The average resistance value at 100 microvolts is 4.8 milliohms. Dielectric Withstanding Voltage (60 Hz rms room temperature) Solder Pots: 600 V at sea level; 150 V at 70,000 feet [21,336 m]. Wire Terminations: 750 V at sea level; 200 V at 70,000 feet [21,336m] Vibration (Per MIL-STD-202, Method 204-, ondition D) No discontinuity in excess of 1 microsecond during twelve 20 minute sweeps from 10 to 2,000 PS at.06 double amplitude or 20 G forces, whichever is less. orrosion Resistance (Per MIL-STD-202, Method 101, ondition ) oth mated and unmated samples do not exceed the maximum allowable contact resistance (8 milliohms) when subjected to the 48 hour salt spray test. Durability The contact resistance after 500 mating cycles is less than the maximum allowable, 8 milliohms. Insulation Resistance Greater than 5,000 megohms at room temperature for the materials listed under Materials. Maximum urrent arrying apacity No. 24 contact, 3 amperes. It must be recognized, however, that all the wires to a connector will not carry their maximum current under all environmental conditions due to wire temperature. ontact Engaging and Separation Forces 6 oz. [1.67N] maximum (eng.); 0.5 oz. [.14N] minimum (sep.). Temperature Range (Operating) Diallyl phthalate -67 F to 257 F [-55 to +125 ]. Materials Insulator Diallyl phthalate per MIL-M-14, Type SDG-F or Liquid rystal Polymer (LP) per STM D5138. ontacts Pin ontact: opper alloy and beryllium copper alloy make up the complete construction. Socket ontact: opper alloy. ody Shell High grade aluminum alloy. Finishes ontacts Standard finish is [ ] gold over copper flash per MIL-G-45204, Type II. ody Shell Electroless nickel per MS Note: Insulators are molded into their metal shells No bonded joint is used. Microminiature D onnectors 1 Screw Mount F E ontact #1 Pin Dia. [ ] 2 Plcs..193 [4.90] The only metal shell connector that mates with all existing plastic types. This line is ideal for external use and other applications requiring frequent disconnect and remating. When durability and reliability are paramount the metal shell connector is unsurpassed it eliminates the need for retrofitting where new metal shell varieties must mate with older plastic types. Originally designed for military applications, they are currently used for commercial requirements, including computers..379 [9.63].365 [9.27] E.180 [4.57] Pin F Socket Socket.798 [20.27] ontact #1.093 [2.36].093 [2.36] Pin D [ ] Dia. Socket D 25

30 Microminiature D onnectors MDM Series Metal Shell onnectors (ontinued) Screw Mount (ontinued) How To Specify S Solder pot for #26 max. stranded wire X Special, does not fit description below. onnector Series MD- M1 37 P Lead Length in Inches (min.) Shell Type and Material M1 Metal Shell Screw Mount Diallyl Phthalate or LP Insulator Hardware (See Pages 14 and 15) No Hardware F Float ushing K Jackscrew, Slotted Head, High Profile L Jackscrew, Slotted Head, Low Profile Q Jackscrew, llen Head, High Profile R Jackscrew, llen Head, Low Profile X Lockscrew, Slotted Head Y Lockscrew, llen Head P Jackpost Insulation olor or Finish 1 ll white wire 4 Gold plated 7 olor coded per MIL-STD-681, 2 ll yellow wire 5 Tin dipped gold plated System 1 3 ll gray wire 6 are (unfinished) 8 Special color code 9 10 color repeating (solid) per M83513 Wire Type * Type E, 7 strand *D Type ET, 19 strand G 19 strand per MIL-22759/11 * Type ET, 7 strand F 7 strand per MIL 22759/11 #26 WG, #24 WG * Type E, 19 strand (#28 WG only) L opper, solid Q Stranded per MIL-W-22759/33 *Per MIL-W Wire Size 4 #24 5 #25 6 #26 8 #28 0 #30 ontact Type P Pin S Socket Layout 9, 15, 21, 25, 30, 31, 37, 51 Part Number MDM1-9P*** MDM1-9S*** MDM1-15P*** MDM1-15S*** MDM1-21P*** MDM1-21S*** MDM1-25P*** MDM1-25S*** MDM1-30P*** MDM1-30S*** MDM1-31P*** MDM1-31S*** MDM1-37P*** MDM1-37S*** MDM1-51P*** MDM1-51S*** D E F vg. Weight ±.005 ±.005 ±.010 ±.010 ±.005 ±.005 lbs. ± 5% [±.127] [±.127] [±.254] [±.254] [±.127] [±.127] [grams] Note: Weight given is with.500 [12.7] uninsulated, solid, 24 WG gold plated copper pigtails. 26

31 Microminiature D onnectors Screw Mount oaxial Terminations vailable now RF Performance in standard subminiature rectangular connectors, with VSWR values of 1.01 to 1.10 in frequencies ranging in D to 2.3 GHz. This is the OMOMTE onnector. This series of connectors incorporates the same metal shells and twist pin contacts used in the widely accepted, high reliability, MDM Series. The RF OMOMTE onnector Series will accommodate RG 196 /U or RG 178 /U coaxial cable terminated in a unique manner in standard, already tooled insert layouts. This feature results in savings in cost, time and space. The RF OMOMTE onnector Series will accommodate a maximum of 17 RG 196 /U or RG 178 /U cables in an area of less than.225 sq. inches [14.51 mm 2 ]. Mixed layouts with coaxial terminations and standard WG 24, 26 and 28 are also immediately available in 7 different shell sizes. The overall envelope and mounting dimensions of equivalent size of OMOMTE onnectors are exactly the same as the standard MDM Series. MDM Series Metal Shell RF OMOMTE onnectors.379 [9.63] E.193 [4.90].250 [6.35] Max..365 [9.27] E.180 [4.57] Performance Data oaxial Terminations Impedance 49.0 to 51.0 Ohms. Voltage Standing Wave Ratio (VSWR) 1.01:1 to 1.10:1 at frequency ranging in D to 2.3 GHz. Dielectric Withstanding Voltage (60 Hz rms room temperature) 750 V at sea level; 200 V at 70,000 feet [21,336 m]. F ontact #1 Pin Pin F ontact #1 Socket Socket Dia. [ ] 2 Plcs..093 [2.36] Epoxy D [ ] Dia..093 [2.36].250 Epoxy [6.35] Max. D Pin Socket (ctual Test Data) rosstalk (etween djacent Lines) 1 to 2 2 to 3 3 to 4 4 to 5 30 MHz 60.0 db 59.8 db 60.7 db 60.0 db 100 MHz 49.1 db 48.3 db 51.7 db 50.6 db 175 MHz 42.6 db 41.4 db 47.2 db 47.0 db 500 MHz 38.0 db 38.8 db 39.5 db 40.0 db 1000 MHz 31.6 db 32.0 db 30.0 db 32.5 db 2000 MHz 22.4 db 22.5 db 22.3 db 20.8 db 3000 MHz 21.5 db 23.9 db 21.4 db 24.2 db Insertion Loss Sample #1 #2 #3 #4 #5 30 MHz.08 db.08 db.08 db.08 db.08 db 100 MHz.24 db.24 db.25 db.25 db.25 db 175 MHz.35 db.36 db.36 db.34 db.32 db 500 MHz.58 db.50 db.60 db.58 db.48 db 1000 MHz 1.25 db 1.33 db 1.36 db 1.35 db 1.24 db 2000 MHz 1.48 db 1.71 db 1.42 db 1.40 db 1.45 db 3000 MHz 2.66 db 2.45 db 2.74 db 2.86 db 2.84 db Note: Verification of all test data is on file at Tyco Electronics and is available upon request. ll test runs using RG 196 /U. Microminiature D onnectors 1 27

32 Microminiature D onnectors MDM Series Metal Shell RF OMOMTE onnectors (ontinued) Screw Mount oaxial Terminations (ontinued) How To Specify MD M3 7 P Lead Length in Inches (min.) onnector Series Wire Size 3 RG 196 /U (White insulation) 2 RG 178 /U (rown insulation) X Special, does not fit description* ontact Type P Pin S Socket Layout 3, 5, 7, 8, 10, 12, 17 Maximum RF combinations using RG 196 /U and RG 178 /U cable Shell Type and Material M3 Metal Shell Screw Mount Diallyl Phthalate or LP Insulator *Ordering riteria: wide variety of contact combinations, coaxial and power mixed, are available. ontact Tyco Electronics for additional arrangement numbers. Part Number MDM3-3P** MDM3-3S** MDM3-5P** MDM3-5S** MDM3-7P** MDM3-7S** MDM3-8P** MDM3-8S** MDM3-10P** MDM3-10S** MDM3-12P** MDM3-12S** MDM3-17P** MDM3-17S** D E F ±.005 ±.005 Max. Max. ±.005 ±.005 [±.127] [±.127] [±.127] [±.127]

33 Microminiature D onnectors ontact rrangement as Viewed from the Engaging Face of the Pin Side MDM Series Metal Shell RF OMOMTE onnectors (ontinued) 1 3 RG196 /U or RG 178 /U RG196 /U or RG 178 /U 7 RG196 /U or RG 178 /U RG196 /U or RG 178 /U 10 RG196 /U or RG 178 /U Microminiature D onnectors enter onductor RG196 /U or RG 178 /U 1 18 Shield Termination Pattern RG196 /U or RG 178 /U 51 Note: The above contact arrangements are the maximum densities that can be obtained in each shell size when using RG 196 /U or RG 178 /U cable. 29

34 Microminiature D onnectors MDM Series Metal Shell onnectors Panel Mounting utout Dimensions Panel Mounting Dimensions MDM.200 ±.005 [5.08 ± 0.13].395 ±.005 [10.03 ± 0.13] Plug and Receptacle Rear Mounted Plug and Receptacle Front Mounted.300 ±.005 [7.62 ± 0.13] Plug Front Mounted Receptacle Rear Mounted Panel utout Dimensions Screw Mounting [ ] Full Radius (Typ.).089 [2.26] Front Figure 1 R.015 [.381] Max. Typ. Number of Fig [+.102] [+.102] [+.127] ontacts.000 [.000].000 [.000].000 [.000] [10.46].177 [4.50].570 [14.48] [9.75].222 [5.64].570 [14.48] [14.27].177 [4.50].720 [18.29] [13.56].222 [5.64].720 [18.29] [18.08].177 [4.50].870 [22.10] [17.37].222 [5.64].870 [22.10] [20.62].177 [4.50].970 [24.64] [19.91].222 [5.64].970 [24.64] [24.43].177 [4.50] [28.45] [23.72].222 [5.64] [28.45] [28.24].177 [4.50] [32.26] [27.53].222 [5.64] [32.26] [26.97].224 [5.69] [30.99] [26.26].264 [6.71] [30.99] Full Radius (Typ.) R [ ] Rear Figure 2 116/117 Note: Front mounting preferred. 30

35 Microminiature D onnectors MK (Metal Shell) Military Part No. MIRODOT Part No. M83513/01-* MK-**-- 9PS M83513/01-* MK-**-- 15PS M83513/01-* MK-**-- 21PS M83513/01-D* MK-**-- 25PS M83513/01-E* MK-**-- 31PS M83513/01-F* MK-**-- 37PS M83513/01-G* MK-**-- 51PS M83513/01-H* MK-**--100PS M83513/02-* MK-**-- 9SS M83513/02-* MK-**-- 15SS M83513/02-* MK-**-- 21SS M83513/02-D* MK-**-- 25SS M83513/02-E* MK-**-- 31SS M83513/02-F* MK-**-- 37SS M83513/02-G* MK-**-- 51SS M83513/02-H* MK-**--100SS M83513/03-01* MK-**-- 9P6G M83513/03-01* MK-**-- 15P6G M83513/03-01* MK-**-- 21P6G M83513/03-D01* MK-**-- 25P6G M83513/03-E01* MK-**-- 31P6G M83513/03-F01* MK-**-- 37P6G M83513/03-G01* MK-**-- 51P6G M83513/03-H01* MK-**--100P6G M83513/03-02* MK-**-- 9P6G M83513/03-02* MK-**-- 15P6G M83513/03-02* MK-**-- 21P6G M83513/03-D02* MK-**-- 25P6G M83513/03-E02* MK-**-- 31P6G M83513/03-F02* MK-**-- 37P6G M83513/03-G02* MK-**-- 51P6G M83513/03-H02* MK-**--100P6G M83513/03-03* MK-**-- 9P6G M83513/03-03* MK-**-- 15P6G M83513/03-03* MK-**-- 21P6G M83513/03-D03* MK-**-- 25P6G M83513/03-E03* MK-**-- 31P6G M83513/03-F03* MK-**-- 37P6G M83513/03-G03* MK-**-- 51P6G M83513/03-H03* MK-**--100P6G M83513/03-04* MK-**-- 9P6G M83513/03-04* MK-**-- 15P6G M83513/03-04* MK-**-- 21P6G M83513/03-D04* MK-**-- 25P6G M83513/03-E04* MK-**-- 31P6G M83513/03-F04* MK-**-- 37P6G M83513/03-G04* MK-**-- 51P6G M83513/03-H04* MK-**--100P6G M83513/03-05* MK-**-- 9P5L4-0.5 M83513/03-05* MK-**-- 15P5L4-0.5 M83513/03-05* MK-**-- 21P5L4-0.5 M83513/03-D05* MK-**-- 25P5L4-0.5 M83513/03-E05* MK-**-- 31P5L4-0.5 M83513/03-F05* MK-**-- 37P5L4-0.5 M83513/03-G05* MK-**-- 51P5L4-0.5 M83513/03-H05* MK-**--100P5L4-0.5 M83513/03-06* MK-**-- 9P5L4-1.0 M83513/03-06* MK-**-- 15P5L4-1.0 M83513/03-06* MK-**-- 21P5L4-1.0 M83513/03-D06* MK-**-- 25P5L4-1.0 MIL-DTL ross Reference Military Part No. MIRODOT Part No. M83513/03-E06* MK-**-- 31P5L4-1.0 M83513/03-F06* MK-**-- 37P5L4-1.0 M83513/03-G06* MK-**-- 51P5L4-1.0 M83513/03-H06* MK-**--100P5L4-1.0 M83513/03-07* MK-**-- 9P5L5-0.5 M83513/03-07* MK-**-- 15P5L5-0.5 M83513/03-07* MK-**-- 21P5L5-0.5 M83513/03-D07* MK-**-- 25P5L5-0.5 M83513/03-E07* MK-**-- 31P5L5-0.5 M83513/03-F07* MK-**-- 37P5L5-0.5 M83513/03-G07* MK-**-- 51P5L5-0.5 M83513/03-H07* MK-**--100P5L5-0.5 M83513/03-08* MK-**-- 9P5L5-1.0 M83513/03-08* MK-**-- 15P5L5-1.0 M83513/03-08* MK-**-- 21P5L5-1.0 M83513/03-D08* MK-**-- 25P5L5-1.0 M83513/03-E08* MK-**-- 31P5L5-1.0 M83513/03-F08* MK-**-- 37P5L5-1.0 M83513/03-G08* MK-**-- 51P5L5-1.0 M83513/03-H08* MK-**--100P5L5-1.0 M83513/03-09* MK-**-- 9P6Q M83513/03-09* MK-**-- 15P6Q M83513/03-09* MK-**-- 21P6Q M83513/03-D09* MK-**-- 25P6Q M83513/03-E09* MK-**-- 31P6Q M83513/03-F09* MK-**-- 37P6Q M83513/03-G09* MK-**-- 51P6Q M83513/03-H09* MK-**--100P6Q M83513/03-10* MK-**-- 9P6Q M83513/03-10* MK-**-- 15P6Q M83513/03-10* MK-**-- 21P6Q M83513/03-D10* MK-**-- 25P6Q M83513/03-E10* MK-**-- 31P6Q M83513/03-F10* MK-**-- 37P6Q M83513/03-G10* MK-**-- 51P6Q M83513/03-H10* MK-**--100P6Q M83513/03-11* MK-**-- 9P6Q M83513/03-11* MK-**-- 15P6Q M83513/03-11* MK-**-- 21P6Q M83513/03-D11* MK-**-- 25P6Q M83513/03-E11* MK-**-- 31P6Q M83513/03-F11* MK-**-- 37P6Q M83513/03-G11* MK-**-- 51P6Q M83513/03-H11* MK-**--100P6Q M83513/03-12* MK-**-- 9P6Q M83513/03-12* MK-**-- 15P6Q M83513/03-12* MK-**-- 21P6Q M83513/03-D12* MK-**-- 25P6Q M83513/03-E12* MK-**-- 31P6Q M83513/03-F12* MK-**-- 37P6Q M83513/03-G12* MK-**-- 51P6Q M83513/03-H12* MK-**--100P6Q M83513/03-13* MK-**-- 9P6G M83513/03-13* MK-**-- 1 5P6G M83513/03-13* MK-**-- 21P6G M83513/03-D13* MK-**-- 25P6G M83513/03-E13* MK-**-- 31P6G M83513/03-F13* MK-**-- 37P6G M83513/03-G13* MK-**-- 51P6G M83513/03-H13* MK-**--100P6G Military Part No. MIRODOT Part No. M83513/03-14* MK-**-- 9P6G M83513/03-14* MK-**-- 15P6G M83513/03-14* MK-**-- 21P6G M83513/03-D14* MK-**-- 25P6G M83513/03-E14* MK-**-- 31P6G M83513/03-F14* MK-**-- 37P6G M83513/03-G14* MK-**-- 51P6G M83513/03-H14* MK-**--100P6G M83513/03-15* MK-**-- 9P6Q M83513/03-15* MK-**-- 15P6Q M83513/03-15* MK-**-- 21P6Q M83513/03-D15* MK-**-- 25P6Q M83513/03-E15* MK-**-- 31P6Q M83513/03-F15* MK-**-- 37P6Q M83513/03-G15* MK-**-- 51P6Q M83513/03-H15* MK-**--100P6Q M83513/03-16* MK-**-- 9P6Q M83513/03-16* MK-**-- 15P6Q M83513/03-16* MK-**-- 21P6Q M83513/03-D16* MK-**-- 25P6Q M83513/03-E16* MK-**-- 31P6Q M83513/03-F16* MK-**-- 37P6Q M83513/03-G16* MK-**-- 51P6Q M83513/03-H16* MK-**--100P6Q M83513/04-01* MK-**-- 9S6G M83513/04-01* MK-**-- 15S6G M83513/04-01* MK-**-- 21S6G M83513/04-D01* MK-**-- 25S6G M83513/04-E01* MK-**-- 31S6G M83513/04-F01* MK-**-- 37S6G M83513/04-G01* MK-**-- 51S6G M83513/04-H01* MK-**--100S6G M83513/04-02* MK-**-- 9S6G M83513/04-02* MK-**-- 15S6G M83513/04-02* MK-**-- 21S6G M83513/04-D02* MK-**-- 25S6G M83513/04-E02* MK-**-- 31S6G M83513/04-F02* MK-**-- 37S6G M83513/04-G02* MK-**-- 51S6G M83513/04-H02* MK-**--100S6G M83513/04-03* MK-**-- 9S6G M83513/04-03* MK-**-- 15S6G M83513/04-03* MK-**-- 21S6G M83513/04-D03* MK-**-- 25S6G M83513/04-E03* MK-**-- 31S6G M83513/04-F03* MK-**-- 37S6G M83513/04-G03* MK-**-- 51S6G M83513/04-H03* MK-**--100S6G M83513/04-04* MK-**-- 9S6G M83513/04-04* MK-**-- 15S6G M83513/04-04* MK-**-- 21S6G M83513/04-D04* MK-**-- 25S6G M83513/04-E04* MK-**-- 31S6G M83513/04-F04* MK-**-- 37S6G M83513/04-G04* MK-**-- 51S6G M83513/04-H04* MK-**--100S6G M83513/04-05* MK-**-- 9S5L4-0.5 M83513/04-05* MK-**-- 15S5L4-0.5 M83513/04-05* MK-**-- 21S5L4-0.5 M83513/04-D05* MK-**-- 25S5L4-0.5 Microminiature D onnectors 1 31

36 Microminiature D onnectors MIL-DTL ross Reference (ontinued) MK (Metal Shell) (ontinued) Military Part No. MIRODOT Part No. M83513/04-E05* MK-**-- 31S5L4-0.5 M83513/04-F05* MK-**-- 37S5L4-0.5 M83513/04-G05* MK-**-- 51S5L4-0.5 M83513/04-H05* MK-**--100S5L4-0.5 M83513/04-06* MK-**-- 9S5L4-1.0 M83513/04-06* MK-**-- 15S5L4-1.0 M83513/04-06* MK-**-- 21S5L4-1.0 M83513/04-D06* MK-**-- 25S5L4-1.0 M83513/04-E06* MK-**-- 31S5L4-1.0 M83513/04-F06* MK-**-- 37S5L4-1.0 M83513/04-G06* MK-**-- 51S5L4-1.0 M83513/04-H06* MK-**--100S5L4-1.0 M83513/04-07* MK-**-- 9S5L5-0.5 M83513/04-07* MK-**-- 15S5L5-0.5 M83513/04-07* MK-**-- 21S5L5-0.5 M83513/04-D07* MK-**-- 25S5L5-0.5 M83513/04-E07* MK-**-- 31S5L5-0.5 M83513/04-F07* MK-**-- 37S5L5-0.5 M83513/04-G07* MK-**-- 51S5L5-0.5 M83513/04-H07* MK-**--100S5L5-0.5 M83513/04-08* MK-**-- 9S5L5-1.0 M83513/04-08* MK-**-- 15S5L5-1.0 M83513/04-08* MK-**-- 21S5L5-1.0 M83513/04-D08* MK-**-- 25S5L5-1.0 M83513/04-E08* MK-**-- 31S5L5-1.0 M83513/04-F08* MK-**-- 37S5L5-1.0 M83513/04-G08* MK-**-- 51S5L5-1.0 M83513/04-H08* MK-**--100S5L5-1.0 M83513/04-09* MK-**-- 9S6Q M83513/04-09* MK-**-- 15S6Q M83513/04-09* MK-**-- 21S6Q Military Part No. MIRODOT Part No. M83513/04-D09* MK-**-- 25S6Q M83513/04-E09* MK-**-- 31S6Q M83513/04-F09* MK-**-- 37S6Q M83513/04-G09* MK-**-- 51S6Q M83513/04-H09* MK-**--100S6Q M83513/04-10* MK-**-- 9S6Q M83513/04-10* MK-**-- 15S6Q M83513/04-10* MK-**-- 21S6Q M83513/04-D10* MK-**-- 25S6Q M83513/04-E10* MK-**-- 31S6Q M83513/04-F10* MK-**-- 37S6Q M83513/04-G10* MK-**-- 51S6Q M83513/04-H10* MK-**--100S6Q M83513/04-11* MK-**-- 9S6Q M83513/04-11* MK-**-- 15S6Q M83513/04-11* MK-**-- 21S6Q M83513/04-D11* MK-**-- 25S6Q M83513/04-E11* MK-**-- 31S6Q M83513/04-F11* MK-**-- 37S6Q M83513/04-G11* MK-**-- 51S6Q M83513/04-H11* MK-**--100S6Q M83513/04-12* MK-**-- 9S6Q M83513/04-12* MK-**-- 15S6Q M83513/04-12* MK-**-- 21S6Q M83513/04-D12* MK-**-- 25S6Q M83513/04-E12* MK-**-- 31S6Q M83513/04-F12* MK-**-- 37S6Q M83513/04-G12* MK-**-- 51S6Q M83513/04-H12* MK-**--100S6Q M83513/04-13* MK-**-- 9S6G M83513/04-13* MK-**-- 15S6G Military Part No. MIRODOT Part No. M83513/04-13* MK-**-- 21S6G M83513/04-D13* MK-**-- 25S6G M83513/04-E13* MK-**-- 31S6G M83513/04-F13* MK-**-- 37S6G M83513/04-G13* MK-**-- 51S6G M83513/04-H13* MK-**--100S6G M83513/04-14* MK-**-- 9S6G M83513/04-14* MK-**-- 15S6G M83513/04-14* MK-**-- 21S6G M83513/04-D14* MK-**-- 25S6G M83513/04-E14* MK-**-- 31S6G M83513/04-F14* MK-**-- 37S6G M83513/04-G14* MK-**-- 51S6G M83513/04-H14* MK-**--100S6G M83513/04-15* MK-**-- 9S6Q M83513/04-15* MK-**-- 15S6Q M83513/04-15* MK-**-- 21S6Q M83513/04-D15* MK-**-- 25S6Q M83513/04-E15* MK-**-- 31S6Q M83513/04-F15* MK-**-- 37S6Q M83513/04-G15* MK-**-- 51S6Q M83513/04-H15* MK-**--100S6Q M83513/04-16* MK-**-- 9S6Q M83513/04-16* MK-**-- 15S6Q M83513/04-16* MK-**-- 21S6Q M83513/04-D16* MK-**-- 25S6Q M83513/04-E16* MK-**-- 31S6Q M83513/04-F16* MK-**-- 37S6Q M83513/04-G16* MK-**-- 51S6Q M83513/04-H16* MK-**--100S6Q * = admium or N = Nickel (space applications only) **2 = admium or N1 = Nickel (space applications only) Hardware Military Part No. MIRODOT Part No. M83513/ HD, J/S, L.F, #2 M83513/ HD, J/S, L.F, #4 M83513/ HD, J/S,H.F, #2 M83513/ HD, J/S, H.F. #4 Military Part No. MIRODOT Part No. M83513/05-05 S. HD, J/S, L.F, #2 M83513/05-15 S. HD, J/S, L.F, #4 M83513/05-06 S. HD, J/S, H.F, #2 M83513/05-16 S. HD, J/S, H.F, #4 Military Part No. MIRODOT Part No. M83513/05-07 JKPOST SSY #2 M83513/05-17 JKPOST SSY, #4 MDR (Plastic Shell) Military Part No. MIRODOT Part No. Military Part No. MIRODOT Part No. Military Part No. MIRODOT Part No. M83513/06- MDR3-- 9PS M83513/07-G MDR3--51SS M83513/08-F02 MDR3--37P6G M83513/06- MDR3--15PS M83513/08-01 MDR3-- 9P6G M83513/08-G02 MDR3--51P6G M83513/06- MDR3--21PS M83513/08-01 MDR3--15P6G M83513/08-03 MDR3-- 9P6G M83513/06-D MDR3--25PS M83513/08-01 MDR3--21P6G M83513/08-03 MDR3--15P6G M83513/06-E MDR3--31PS M83513/08-D01 MDR3--25P6G M83513/08-03 MDR3--21P6G M83513/06-F MDR3--37PS M83513/08-E01 MDR3--31P6G M83513/08-D03 MDR3--25P6G M83513/06-G MDR3--51PS M83513/08-F01 MDR3--37P6G M83513/08-E03 MDR3--31P6G M83513/07- MDR3-- 9SS M83513/08-G01 MDR3--51P6G M83513/08-F03 MDR3--37P6G M83513/07- MDR3--15SS M83513/08-02 MDR3-- 9P6G M83513/08-G03 MDR3--51P6G M83513/07- MDR3--21SS M83513/08-02 MDR3--15P6G M83513/08-04 MDR3-- 9P6G M83513/07-D MDR3--25SS M83513/08-02 MDR3--21P6G M83513/08-04 MDR3--15P6G M83513/07-E MDR3--31SS M83513/08-D02 MDR3--25P6G M83513/08-04 MDR3--21P6G M83513/07-F MDR3--37SS M83513/08-E02 MDR3--31P6G M83513/08-D04 MDR3--25P6G

37 Microminiature D onnectors MDR (Plastic Shell) (ontinued) Military Part No. M83513/08-E04 M83513/08-F04 M83513/08-G04 M83513/08-05 M83513/08-05 M83513/08-05 M83513/08-D05 M83513/08-E05 M83513/08-F05 M83513/08-G05 M83513/08-06 M83513/08-06 M83513/08-06 M83513/08-D06 M83513/08-E06 M83513/08-F06 M83513/08-G06 M83513/08-07 M83513/08-07 M83513/08-07 M83513/08-D07 M83513/08-E07 M83513/08-F07 M83513/08-G07 M83513/08-08 M83513/08-08 M83513/08-08 M83513/08-D08 M83513/08-E08 M83513/08-F08 M83513/08-G08 M83513/08-09 M83513/08-09 M83513/08-09 M83513/08-D09 M83513/08-E09 M83513/08-F09 M83513/08-G09 M83513/08-10 M83513/08-10 M83513/08-10 M83513/08-D10 M83513/08-E10 M83513/08-F10 M83513/08-G10 M83513/08-11 M83513/08-11 M83513/08-11 M83513/08-D11 M83513/08-E11 M83513/08-F11 M83513/08-G11 M83513/08-12 M83513/08-12 M83513/08-12 M83513/08-D12 M83513/08-E12 M83513/08-F12 M83513/08-G12 M83513/08-13 MIRODOT Part No. MDR3--31P6G MDR3--37P6G MDR3--51P6G MDR3-- 9P5L4-0.5 MDR3--15P5L4-0.5 MDR3--21P5L4-0.5 MDR3--25P5L4-0.5 MDR3--31P5L4-0.5 MDR3--37P5L4-0.5 MDR3--51P5L4-0.5 MDR3-- 9P5L4-1.0 MDR3--15P5L4-1.0 MDR3--21P5L4-1.0 MDR3--25P5L4-1.0 MDR3--31P5L4-1.0 MDR3--37P5L4-1.0 MDR3--51P5L4-1.0 MDR3-- 9P5L5-0.5 MDR3--15P5L5-0.5 MDR3--21P5L5-0.5 MDR3--25P5L5-0.5 MDR3--31P5L5-0.5 MDR3--37P5L5-0.5 MDR3--51P5L5-0.5 MDR3-- 9P5L5-1.0 MDR3--15P5L5-1.0 MDR3--21P5L5-1.0 MDR3--25P5L5-1.0 MDR3--31P5L5-1.0 MDR3--37P5L5-1.0 MDR3--51P5L5-1.0 MDR3-- 9P6Q MDR3--15P6Q MDR3--21P6Q MDR3--25P6Q MDR3--31P6Q MDR3--37P6Q MDR3--51P6Q MDR3-- 9P6Q MDR3--15P6Q MDR3--21P6Q MDR3--25P6Q MDR3--31P6Q MDR3--37P6Q MDR3--51P6Q MDR3-- 9P6Q MDR3--15P6Q MDR3--21P6Q MDR3--25P6Q MDR3--31P6Q MDR3--37P6Q MDR3--51P6Q MDR3-- 9P6Q MDR3--15P6Q MDR3--21P6Q MDR3--25P6Q MDR3--31P6Q MDR3--37P6Q MDR3--51P6Q MDR3-- 9P6G MIL-DTL ross Reference (ontinued) Military Part No. M83513/08-13 M83513/08-13 M83513/08-D13 M83513/08-E13 M83513/08-F13 M83513/08-G13 M83513/08-14 M83513/08-14 M83513/08-14 M83513/08-D14 M83513/08-E14 M83513/08-F14 M83513/08-G14 M83513/08-15 M83513/08-15 M83513/08-15 M83513/08-D15 M83513/08-E15 M83513/08-F15 M83513/08-G15 M83513/08-16 M83513/08-16 M83513/08-16 M83513/08-D16 M83513/08-E16 M83513/08-F16 M83513/08-G16 M83513/09-01 M83513/09-01 M83513/09-01 M83513/09-D01 M83513/09-E01 M83513/09-F01 M83513/09-G01 M83513/09-02 M83513/09-02 M83513/09-02 M83513/09-D02 M83513/09-E02 M83513/09-F02 M83513/09-G02 M83513/09-03 M83513/09-03 M83513/09-03 M83513/09-D03 M83513/09-E03 M83513/09-F03 M83513/09-G03 M83513/09-04 M83513/09-04 M83513/09-04 M83513/09-D04 M83513/09-E04 M83513/09-F04 M83513/09-G04 M83513/09-05 M83513/09-05 M83513/09-05 M83513/09-D05 M83513/09-E05 MIRODOT Part No. MDR3--15P6G MDR3--21P6G MDR3--25P6G MDR3--31P6G MDR3--37P6G MDR3--51P6G MDR3-- 9P6G MDR3--15P6G MDR3--21P6G MDR3--25P6G MDR3--31P6G MDR3--37P6G MDR3--51P6G MDR3-- 9P6Q MDR3--15P6Q MDR3--21P6Q MDR3--25P6Q MDR3--31P6Q MDR3--37P6Q MDR3--51P6Q MDR3-- 9P6Q MDR3--15P6Q MDR3--21P6Q MDR3--25P6Q MDR3--31P6Q MDR3--37P6Q MDR3--51P6Q MDR3-- 9S6G MDR3--15S6G MDR3--21S6G MDR3--25S6G MDR3--31S6G MDR3--37S6G MDR3--51S6G MDR3-- 9S6G MDR3--15S6G MDR3--21S6G MDR3--25S6G MDR3--31S6G MDR3--37S6G MDR3--51S6G MDR3-- 9S6G MDR3-- 15S6G MDR3-- 21S6G MDR3--25S6G MDR3--31S6G MDR3--37S6G MDR3--51S6G MDR3-- 9S6G MDR3--15S6G MDR3--21S6G MDR3--25S6G MDR3--31S6G MDR3--37S6G MDR3--51S6G MDR3-- 9S5L4-0.5 MDR3--15S5L4-0.5 MDR3--21S5L4-0.5 MDR3--25S5L4-0.5 MDR3--31S5L4-0.5 Military Part No. M83513/09-F05 M83513/09-G05 M83513/09-06 M83513/09-06 M83513/09-06 M83513/09-D06 M83513/09-E06 M83513/09-F06 M83513/09-G06 M83513/09-07 M83513/09-07 M83513/09-07 M83513/09-D07 M83513/09-E07 M83513/09-F07 M83513/09-G07 M83513/09-08 M83513/09-08 M83513/09-08 M83513/09-D08 M83513/09-E08 M83513/09-F08 M83513/09-G08 M83513/09-09 M83513/09-09 M83513/09-09 M83513/09-D09 M83513/09-E09 M83513/09-F09 M83513/09-G09 M83513/09-10 M83513/09-10 M83513/09-10 M83513/09-D10 M83513/09-E10 M83513/09-F10 M83513/09-G10 M83513/09-11 M83513/09-11 M83513/09-11 M83513/09-D11 M83513/09-E11 M83513/09-F11 M83513/09-G11 M83513/09-12 M83513/09-12 M83513/09-12 M83513/09-D12 M83513/09-E12 M83513/09-F12 M83513/09-G12 M83513/09-13 M83513/09-13 M83513/09-13 M83513/09-D13 M83513/09-E13 M83513/09-F13 M83513/09-G13 M83513/09-14 M83513/09-14 MIRODOT Part No. MDR3--37S5L4-0.5 MDR3--51S5L4-0.5 MDR3-- 9S5L4-1.0 MDR3--15S5L4-1.0 MDR3--21S5L4-1.0 MDR3--25S5L4-1.0 MDR3--31S5L4-1.0 MDR3--37S5L4-1.0 MDR3--51S5L4-1.0 MDR3-- 9S5L5-0.5 MDR3--15S5L5-0.5 MDR3--21S5L5-0.5 MDR3--25S5L5-0.5 MDR3--31S5L5-0.5 MDR3--37S5L5-0.5 MDR3--51S5L5-0.5 MDR3-- 9S5L5-1.0 MDR3--15S5L5-1.0 MDR3--21S5L5-1.0 MDR3--25S5L5-1.0 MDR3--31S5L5-1.0 MDR3--37S5L5-1.0 MDR3--51S5L5-1.0 MDR3-- 9S6Q MDR3--15S6Q MDR3--21S6Q MDR3--25S6Q MDR3--31S6Q MDR3--37S6Q MDR3--51S6Q MDR3-- 9S6Q MDR3--15S6Q MDR3--21S6Q MDR3--25S6Q MDR3--31S6Q MDR3--37S6Q MDR3--51S6Q MDR3-- 9S6Q MDR3--15S6Q MDR3--21S6Q MDR3--25S6Q MDR3--31S6Q MDR3--37S6Q MDR3--51S6Q MDR3-- 9S6Q MDR3--15S6Q MDR3--21S6Q MDR3--25S6Q MDR3--31S6Q MDR3--37S6Q MDR3--51S6Q MDR3-- 9S6G MDR3--15S6G MDR3--21S6G MDR3--25S6G MDR3--31S6G MDR3--37S6G MDR3--51S6G MDR3-- 9S6G MDR3--15S6G Microminiature D onnectors 1

38 Microminiature D onnectors MIL-DTL ross Reference (ontinued) MDR (Plastic Shell) (ontinued) Military Part No. MIRODOT Part No. Military Part No. MIRODOT Part No. Military Part No. MIRODOT Part No. M83513/09-14 MDR3--21S6G M83513/09-15 MDR3--21S6Q M83513/09-16 MDR3--21S6Q M83513/09-D14 MDR3--25S6G M83513/09-D15 MDR3--25S6Q M83513/09-D16 MDR3--25S6Q M83513/09-E14 MDR3--31S6G M83513/09-E15 MDR3--31S6Q M83513/09-E16 MDR3--31S6Q M83513/09-F14 MDR3--37S6G M83513/09-F15 MDR3--37S6Q M83513/09-F16 MDR3--37S6Q M83513/09-G14 MDR3--51S6G M83513/09-G15 MDR3--51S6Q M83513/09-G16 MDR3--51S6Q M83513/09-15 MDR3-- 9S6Q M83513/09-16 MDR3-- 9S6Q M83513/09-15 MDR3--15S6Q M83513/09-16 MDR3--15S6Q MK (Metal Shell) Military Part No. MIRODOT Part No. M83513/10-01*N MK-**-- 9PRT1 M83513/10-01*N MK-**-- 15PRT1 M83513/10-01*N MK-**-- 21PRT1 M83513/10-D01*N MK-**-- 25PRT1 M83513/10-E01*N MK-**-- 31PRT1 M83513/10-F01*N MK-**-- 37PRT1 M83513/10-01*P MK-**-P- 9PRT1 M83513/10-01*P MK-**-P- 15PRT1 M83513/10-01*P MK-**-P- 21PRT1 M83513/10-D01*P MK-**-P- 25PRT1 M83513/10-E01*P MK-**-P- 31PRT1 M83513/10-F01*P MK-**-P- 37PRT1 M83513/10-02*N MK-**-- 9PRT1 M83513/10-02*N MK-**-- 15PRT1 M83513/10-02*N MK-**-- 21PRT1 M83513/10-D02*N MK-**-- 25PRT1 M83513/10-E02*N MK-**-- 31PRT1 M83513/10-F02*N MK-**-- 37PRT1 M83513/10-02*P MK-**-P- 9PRT1 M83513/10-02*P MK-**-P- 15PRT1 M83513/10-02*P MK-**-P- 21PRT1 M83513/10-D02*P MK-**-P- 25PRT1 M83513/10-E02*P MK-**-P- 31PRT1 M83513/10-F02*P MK-**-P- 37PRT1 M83513/10-03*N MK-**-- 9PRT1 M83513/10-03*N MK-**-- 15PRT1 M83513/10-03*N MK-**-- 21PRT1 M83513/10-D03*N MK-**-- 25PRT1 M83513/10-E03*N MK-**-- 31PRT1 M83513/10-F03*N MK-**-- 37PRT1 M83513/10-03*P MK-**-P- 9PRT1 M83513/10-03*P MK-**-P- 15PRT1 M83513/10-03*P MK-**-P- 21PRT1 M83513/10-D03*P MK-**-P- 25PRT1 M83513/10-E03*P MK-**-P- 31PRT1 M83513/10-F03*P MK-**-P- 37PRT1 M83513/11-G01*N MK-**-- 51PRT1 M83513/11-G01*P MK-**-P- 51PRT1 M83513/11-G02*N MK-**-- 51PRT1 M83513/11-G02*P MK-**-P- 51PRT1 M83513/11-G03*N MK-**-- 51PRT1 M83513/11-G03*P MK-**-P- 51PRT1 M83513/12-H01*N MK-**--100PRT1 M83513/12-H01*P MK-**-P-100PRT1 M83513/12-H02*N MK-**--100PRT1 M83513/12-H02*P MK-**-P-100PRT1 M83513/12-H03*N MK-**--100PRT1 Military Part No. MIRODOT Part No. M83513/12-H03*P MK-**-P-100PRT1 M83513/13-01*N MK-**-- 9SRT1 M83513/13-01*N MK-**-- 15SRT1 M83513/13-01*N MK-**-- 21SRT1 M83513/13-D01*N MK-**-- 25SRT1 M83513/13-E01*N MK-**-- 31SRT1 M83513/13-F01*N MK-**-- 37SRT1 M83513/13-01*P MK-**-P- 9SRT1 M83513/13-01*P MK-**-P- 15SRT1 M83513/13-01*P MK-**-P- 21SRT1 M83513/13-D01*P MK-**-P- 25SRT1 M83513/13-E01*P MK-**-P- 31SRT1 M83513/13-F01*P MK-**-P- 37SRT1 M83513/13-02*N MK-**-- 9SRT1 M83513/13-02*N MK-**-- 15SRT1 M83513/13-02*N MK-**-- 21SRT1 M83513/13-D02*N MK-**-- 25SRT1 M83513/13-E02*N MK-**-- 31SRT1 M83513/13-F02*N MK-**-- 37SRT1 M83513/13-02*P MK-**-P- 9SRT1 M83513/13-02*P MK-**-P- 15SRT1 M83513/13-02*P MK-**-P- 21SRT1 M83513/13-D02*P MK-**-P- 25SRT1 M83513/13-E02*P MK-**-P- 31SRT1 M83513/13-F02*P MK-**-P- 37SRT1 M83513/13-03*N MK-**-- 9SRT1 M83513/13-03*N MK-**-- 15SRT1 M83513/13-03*N MK-**-- 21SRT1 M83513/13-D03*N MK-**-- 25SRT1 M83513/13-E03*N MK-**-- 31SRT1 M83513/13-F03*N MK-**-- 37SRT1 M83513/13-03*P MK-**-P- 9SRT1 M83513/13-03*P MK-**-P- 15SRT1 M83513/13-03*P MK-**-P- 21SRT1 M83513/13-D03*P MK-**-P- 25SRT1 M83513/13-E03*P MK-**-P- 31SRT1 M83513/13-F03*P MK-**-P- 37SRT1 M83513/14-G01*N MK-**-- 51SRT1 M83513/14-G01*P MK-**-P- 51SRT1 M83513/14-G02*N MK-**-- 51SRT1 M83513/14-G02*P MK-**-P- 51SRT1 M83513/14-G03*N MK-**-- 51SRT1 M83513/14-G03*P MK-**-P- 51SRT1 M83513/15-H01*N MK-**--100SRT1 M83513/15-H01*P MK-**-P-100SRT1 M83513/15-H02*N MK-**--100SRT1 M83515/15-H02*P MK-**-P-100SRT1 Military Part No. MIRODOT Part No. M83513/15-H03*N MK-**--100SRT1 M83513/15-H03*P MK-**-P-100SRT1 M83513/16-01*N MK-**-- 9PRT3 M83513/16-01*N MK-**-- 15PRT3 M83513/16-01*N MK-**-- 21PRT3 M83513/16-D01*N MK-**-- 25PRT3 M83513/16-E01*N MK-**-- 31PRT3 M83513/16-F01*N MK-**-- 37PRT3 M83513/16-01*P MK-**-P- 9PRT3 M83513/16-01*P MK-**-P- 15PRT3 M83513/16-01*P MK-**-P- 21PRT3 M83513/16-D01*P MK-**-P- 25PRT3 M83513/16-E01*P MK-**-P- 31PRT3 M83513/16-F01*P MK-**-P- 37PRT3 M83513/16-02*N MK-**-- 9PRT3 M83513/16-02*N MK-**-- 15PRT3 M83513/16-02*N MK-**-- 21PRT3 M83513/16-D02*N MK-**-- 25PRT3 M83513/16-E02*N MK-**-- 31PRT3 M83513/16-F02*N MK-**-- 37PRT3 M83513/16-02*P MK-**-P- 9PRT3 M83513/16-02*P MK-**-P- 15PRT3 M83513/16-02*P MK-**-P- 21PRT3 M83513/16-D02*P MK-**-P- 25PRT3 M83513/16-E02*P MK-**-P- 31PRT3 M83513/16-F02*P MK-**-P- 37PRT3 M83513/16-03*N MK-**-- 9PRT3 M83513/16-03*N MK-**-- 15PRT3 M83513/16-03*N MK-**-- 21PRT3 M83513/16-D03*N MK-**-- 25PRT3 M83513/16-E03*N MK-**-- 31PRT3 M83513/16-F03*N MK-**-- 37PRT3 M83513/16-03*P MK-**-P- 9PRT3 M83513/16-03*P MK-**-P- 15PRT3 M83513/16-03*P MK-**-P- 21PRT3 M83513/16-D03*P MK-**-P- 25PRT3 M83513/16-E03*P MK-**-P- 31PRT3 M83513/16-F03*P MK-**-P- 37PRT3 M83513/17-G01*N MK-**-- 51PRT3 M83513/17-G01*P MK-**-P- 51PRT3 M83513/17-G02*N MK-**-- 51PRT3 M83513/17-G02*P MK-**-P- 51PRT3 M83513/17-G03*N MK-**-- 51PRT3 M83513/17-G03*P MK-**-P- 51PRT3 M83513/18-H01*N MK-**--100PRT3 M83513/18-H01*P MK-**-P-100PRT3 M83513/18-H02*N MK-**--100PRT3 34

39 Microminiature D onnectors MK (Metal Shell) (ontinued) Military Part No. MIRODOT Part No. M83515/18-H02*P MK-**-P-100PRT3 M83513/18-H03*N MK-**--100PRT3 M83513/18-H03*P MK-**-P-100PRT3 M83513/19-01*N MK-**-- 9SRT3 M83513/19-01*N MK-**-- 15SRT3 M83513/19-01*N MK-**-- 21SRT3 M83513/19-D01*N MK-**-- 25SRT3 M83513/19-E01*N MK-**-- 31SRT3 M83513/19-F01*N MK-**-- 37SRT3 M83513/19-01*P MK-**-P- 9SRT3 M83513/19-01*P MK-**-P- 15SRT3 M83513/19-01*P MK-**-P- 21SRT3 M83513/19-D01*P MK-**-P- 25SRT3 M83513/19-E01*P MK-**-P- 31SRT3 M83513/19-F01*P MK-**-P- 37SRT3 M83513/19-02*N MK-**-- 9SRT3 M83513/19-02*N MK-**-- 15SRT3 M83513/19-02*N MK-**-- 21SRT3 M83513/19-D02*N MK-**-- 25SRT3 M83513/19-E02*N MK-**-- 31SRT3 M83513/19-F02*N MK-**-- 37SRT3 M83513/19-02*P MK-**-P- 9SRT3 M83513/19-02*P MK-**-P- 15SRT3 M83513/19-02*P MK-**-P- 21SRT3 M83513/19-D02*P MK-**-P- 25SRT3 M83513/19-E02*P MK-**-P- 31SRT3 M83513/19-F02*P MK-**-P- 37SRT3 M83513/19-03*N MK-**-- 9SRT3 M83513/19-03*N MK-**-- 15SRT3 M83513/19-03*N MK-**-- 21SRT3 M83513/19-D03*N MK-**-- 25SRT3 M83513/19-E03*N MK-**-- 31SRT3 M83513/19-F03*N MK-**-- 37SRT3 M83513/19-03*P MK-**-P- 9SRT3 M83513/19-03*P MK-**-P- 15SRT3 M83513/19-03*P MK-**-P- 21SRT3 M83513/19-D03*P MK-**-P- 25SRT3 M83513/19-E03*P MK-**-P- 31SRT3 M83513/19-F03*P MK-**-P- 37SRT3 M83513/20-G01*N MK-**-- 51SRT3 M83513/20-G01*P MK-**-P- 51SRT3 M83513/20-G02*N MK-**-- 51SRT3 M83513/20-G02*P MK-**-P- 51SRT3 M83513/20-G03*N MK-**-- 51SRT3 M83513/20-G03*P MK-**-P- 51SRT3 M83513/21-H01*N MK-**--100SRT3 M83513/21-H01*P MK-**-P-100SRT3 M83513/21-H02*N MK-**--100SRT3 M83515/21-H02*P MK-**-P-100SRT3 * = admium or N = Nickel (space applications only) **2 = admium or N1 = Nickel (space applications only) MIL-DTL ross Reference (ontinued) Military Part No. MIRODOT Part No. M83513/21-H03*N MK-**--100SRT3 M83513/21-H03*P MK-**-P-100SRT3 M83513/22-01*N MK-**-- 9PST1 M83513/22-01*N MK-**-- 15PST1 M83513/22-01*N MK-**-- 21PST1 M83513/22-D01*N MK-**-- 25PST1 M83513/22-E01*N MK-**-- 31PST1 M83513/22-F01*N MK-**-- 37PST1 M83513/22-01*P MK-**-P- 9PST1 M83513/22-01*P MK-**-P- 15PST1 M83513/22-01*P MK-**-P- 21PST1 M83513/22-D01*P MK-**-P- 25PST1 M83513/22-E01*P MK-**-P- 31PST1 M83513/22-F01*P MK-**-P- 37PST1 M83513/22-02*N MK-**-- 9PST1 M83513/22-02*N MK-**-- 15PST1 M83513/22-02*N MK-**-- 21PST1 M83513/22-D02*N MK-**-- 25PST1 M83513/22-E02*N MK-**-- 31PST1 M83513/22-F02*N MK-**-- 37PST1 M83513/22-02*P MK-**-P- 9PST1 M83513/22-02*P MK-**-P- 15PST1 M83513/22-02*P MK-**-P- 21PST1 M83513/22-D02*P MK-**-P- 25PST1 M83513/22-E02*P MK-**-P- 31PST1 M83513/22-F02*P MK-**-P- 37PST1 M83513/22-03*N MK-**-- 9PST1 M83513/22-03*N MK-**-- 15PST1 M83513/22-03*N MK-**-- 21PST1 M83513/22-D03*N MK-**-- 25PST1 M83513/22-E03*N MK-**-- 31PST1 M83513/22-F03*N MK-**-- 37PST1 M83513/22-03*P MK-**-P- 9PST1 M83513/22-03*P MK-**-P- 15PST1 M83513/22-03*P MK-**-P- 21PST1 M83513/22-D03*P MK-**-P- 25PST1 M83513/22-E03*P MK-**-P- 31PST1 M83513/22-F03*P MK-**-P- 37PST1 M83513/23-G01*N MK-**-- 51PST1 M83513/23-G01*P MK-**-P- 51PST1 M83513/23-G02*N MK-**-- 51PST1 M83513/23-G02*P MK-**-P- 51PST1 M83513/23-G03*N MK-**-- 51PST1 M83513/23-G03*P MK-**-P- 51PST1 M83513/24-H01*N MK-**--100PST1 M83513/24-H01*P MK-**-P-100PST1 M83513/24-H02*N MK-**--100PST1 M83515/24-H02*P MK-**-P-100PST1 M83513/24-H03*N MK-**--100PST1 Military Part No. MIRODOT Part No. M83513/24-H03*P MK-**-P-100PST1 M83513/25-01*N MK-**-- 9SST1 M83513/25-01*N MK-**-- 15SST1 M83513/25-01*N MK-**-- 21SST1 M83513/25-D01*N MK-**-- 25SST1 M83513/25-E01*N MK-**-- 31SST1 M83513/25-F01*N MK-**-- 37SST1 M83513/25-01*P MK-**-P- 9SST1 M83513/25-01*P MK-**-P- 15SST1 M83513/25-01*P MK-**-P- 21SST1 M83513/25-D01*P MK-**-P- 25SST1 M83513/25-E01*P MK-**-P- 31SST1 M83513/25-F01*P MK-**-P- 37SST1 M83513/25-02*N MK-**-- 9SST1 M83513/25-02*N MK-**-- 15SST1 M83513/25-02*N MK-**-- 21SST1 M83513/25-D02*N MK-**-- 25SST1 M83513/25-E02*N MK-**-- 31SST1 M83513/25-F02*N MK-**-- 37SST1 M83513/25-02*P MK-**-P- 9SST1 M83513/25-02*P MK-**-P- 15SST1 M83513/25-02*P MK-**-P- 21SST1 M83513/25-D02*P MK-**-P- 25SST1 M83513/25-E02*P MK-**-P- 31SST1 M83513/25-F02*P MK-**-P- 37SST1 M83513/25-03*N MK-**-- 9SST1 M83513/25-03*N MK-**-- 15SST1 M83513/25-03*N MK-**-- 21SST1 M83513/25-D03*N MK-**-- 25SST1 M83513/25-E03*N MK-**-- 31SST1 M83513/25-F03*N MK-**-- 37SST1 M83513/25-03*P MK-**-P- 9SST1 M83513/25-03*P MK-**-P- 15SST1 M83513/25-03*P MK-**-P- 21SST1 M83513/25-D03*P MK-**-P- 25SST1 M83513/25-E03*P MK-**-P- 31SST1 M83513/25-F03*P MK-**-P- 37SST1 M83513/26-G01*N MK-**-- 51SST1 M83513/26-G01*P MK-**-P- 51SST1 M83513/26-G02*N MK-**-- 51SST1 M83513/26-G02*P MK-**-P- 51SST1 M83513/26-G03*N MK-**-- 51SST1 M83513/26-G03*P MK-**-P- 51SST1 M83513/27-H01*N MK-**--100SST1 M83513/27-H01*P MK-**-P-100SST1 M83513/27-H02*N MK-**--100SST1 M83515/27-H02*P MK-**-P-100SST1 M83513/27-H03*N MK-**--100SST1 M83513/27-H03*P MK-**-P-100SST1 Microminiature D onnectors 1 35

40 Microminiature D onnectors Engineering Notes 36

41 Rectangular onnectors Introduction Product Facts Designed for both military and commercial applications Well-suited for external conditions Precise contact alignment with extremely low engaging forces Product offering consists of metal shell, plastic shell, panel mount, printed circuit board and strip connectors Metal shell connector promotes high durability and reliability Rectangular onnectors 2 Twist Pin contact High Density Microminiature onnectors described in this catalog comprise a complete contact system which is adaptable to a numerous variety of form factors. Precise contact alignment, with extremely low engaging forces, results from the manner in which the Twist Pin contact system is packaged by constructing the male contact as a breathing helical spring, electrical contact is achieved at many points around the periphery of the pin bundle. Featured in this catalog is the twist pin contact line, which accommodates round wire and Flat onductor able (F), Edgeboard onnectors. pplications requiring frequent mating and disconnect call for the metal shell connector version. This style connector promotes high durability and reliability. Designed for both military and commercial applications, this latest innovation is especially well-suited to use in external conditions. This catalog also features light-weight plastic connectors in a strip (MS) format as well as JKMTE onnectors (MJ Series) format for small package application requiring high reliability. Edgeboard applications are covered in this catalog with a special High Density Standard Module (HDSM) onnector as well as MIL-DTL (MEM) onnectors. The high mating forces of these larger connectors are greatly reduced with the use of the low force twist pins and sockets which are standard for this product line. 37

42 Rectangular onnectors Twist Pin ontact Data Twist Pin 24 gauge Pin and Socket ontacts The contact spring member normally found in socket contacts has been eliminated by creating a breathing helical spring principle on the pin contact smaller, more durable contacts can be manufactured economically. Wire range WG solid & stranded. 38

43 Rectangular onnectors ME Series Plastic Shell Edgeboard onnectors Plastic Shell Edge oard onnectors Designed for commercial applications requiring frequent disconnect and connect, including data recorders and computers. Mother board connector can be ordered to fit any pattern on your circuit board. This new connector features the proven twist pin contact with precision contact alignment with extremely low engaging forces. Units are available with contacts as few as 40 and as many as 110. Wire sizes 28 through 24, any type of plating or color coding, any kind of wire termination including wire wrap a high degree of flexibility for your military or commercial application. Two hexagonal polarizing keys can provide up to 36 different key combinations are supplied. 40 ontacts Rectangular onnectors 2 Technical & Performance Data Twist Pin Plastic Shell onnectors Electrical ontact Resistance The average mated contact resistance is 4 milliohms, with a maximum value of 8 milliohms, using standard 24 WG solid copper leads when measured directly behind the crimp joints of the mated pin and socket contacts. The average resistance value at 100 microvolts is 4.8 milliohms. Dielectric Withstanding Voltage 800 V RMS at sea level (600 for solder pots); 200 V RMS at 70,000 feet [21,336m] (150 for solder pots). orrosion Resistance (Per MIL- STD-202, Method 101, ondition ) oth mated and unmated samples do not exceed the maximum allowable contact resistance (8 milliohms) when subjected to the 48 hour salt spray test. Durability The contact resistance after 500 mating cycles is less than the maximum allowable, 8 milliohms. Insulation Resistance Greater than 5,000 megohms at room temperature. Maximum urrent arrying apacity No. 24 contact 3 amperes. It must be recognized however, that all the wires to a connector will not carry their maximum current under all environmental conditions due to wire temperature. Mechanical ontact Engaging & Separation Forces 8.0 oz. max. [2.24N] (eng.), 0.5 oz. min.[.14n] (sep.) Environmental Temperature Range (Operating) -67 F to 257 F [-55 to +125 ]. Vibration (Per MIL-STD-202, Method 204, ondition D) No discontinuity in excess of 1 µ sec. during twelve 20 minute sweeps from 10 to 2000 PS at.06 double amplitude or 20 G forces, whichever is less. Materials Insulator Liquid rystal Polymer (LP) per STM D5138 or Polyphenylene Sulfide per MIL-M ontacts Pin-contact: opper alloy and beryllium copper alloy make up the complete construction. Socket contact: opper alloy. Hardware orrosion resistant stainless steel. Finishes Insulator None. ontacts Standard finish is [ ] gold over copper flash per MIL-G-45204, Type II. Hardware Passivated per QQ-P

44 Rectangular onnectors ME Series Plastic Shell Edgeboard onnectors (ontinued) Mother oard (Pin Side) [6.35].075 [1.91] [1.27] Typ..100 [2.54] Typ..225 [5.72] Polarization Key Location 2 Plcs..050 [1.27].075 [1.91] Typ. Detail.150 [3.81] Typ. Pin ontact/ Lead ssembly Insulator [ ] Typ. Epoxy Ø [ ] 2 Plcs WG opper Wire, Gold Plated, Solder Dipped Section [ ] Typ. #2-56 UN-2 Thd Hex Polarizing Key 2 Supplied (Loose Packed) Daughter oard (Socket Side) [ ].250 [6.35].300 [7.62] Ø.187 Thru [4.75] 2 Plcs. (Near Ear Only) #24 WG opper Wire Ø Thru.187 [ Thru 4.75] (2 Plcs.) (Far ear only).250 [6.35] Max. Typ..2 00±.015 [5.08 ±.381] Typ..100 Min. [2.54] Solder Dip Typ..030 [.762] Max..450 [11.43].180 [4.57].2 75 [6.99] 2 Plcs. Epoxy.075 [1.91] Polarization Key Location 2 Plcs Insulator Socket ontact/ Lead ssembly Section [6.35] [1.27] Hex Polarizing Key 2 Supplied (Loose Packed) #2-56 UN-2 Thd.

45 Rectangular onnectors ME Series Plastic Shell Edgeboard onnectors (ontinued) Dimensions for.062 [1.57] P oard No. of ontacts ±.010 [±.254] ±.005 [±.127] asic Notes: For P oards of different widths, consult Tyco Electronics. Rectangular onnectors How To Specify 2 S Solder pots 26 WG max. Z Wire layout as shown on page 40. X Special, does not fit description below. onnector Series ME R1 40 P 6 L Lead Length in Inches (min.) Material R1 Liquid rystal Polymer or Polyphenylene Sulfide Layout 40, 44, 80, 110 ontact Type P Pin (Mother oard onnector) S Socket (Daughter oard onnector) Insulation olor or Finish 1 ll white wire 4 Gold plated 7 olor coded per 2 ll yellow wire 5 Tin dipped gold plated MIL-STD-681, System 1 3 ll gray wire 6 are (unfinished) 8 Special color code 9 Ten solid color repeating (starts with black) Wire Type * Type E, 7 strand *D Type ET, 19 strand G 19 strand per MIL-22759/11 * Type ET, 7 strand F 7 strand per MIL-22759/11 26 WG, 24 WG * Type E, 19 strand (#28 WG only) L opper, solid Q Stranded per MIL-W-22759/33 *Per MIL-W Wire Size 4-24 WG 5-25 WG 6-26WG 8-28 WG 0-30 WG Mounting Holes on the Daughter oard side can be modified. 41

46 Rectangular onnectors MEM Series Metal Shell Edgeboard onnectors Metal Shell Edge oard onnectors Meets MIL-DTL performance requirements Layouts 128 and 184 are QPL to slash sheets 120, 121, 122 and 123 onnectors are available in 40, 44, 80, 110, 128, 152, and 184 positions Utilizes low force twist pins and our low force sockets. Mating forces in the 3 to 4 oz. [.83 to 1.11N] range per contact are typical with low force pin and low force socket Designed for surface mounting and through-theboard mounting vailable termination Mother board (pin side) cactus bend Daughter board (socket side) coke bottle, right-angle bend to or side Solder pots, and variety of other wire terminations for pin and socket connectors available at customer s request Two hexagonal polarizing keys (per MIL-DTL slash sheet 124) are provided. Jackscrew hardware is available. For programmable keying/ jacking modifications consult Tyco Electronics Performance Data In addition to the plastic versions of the 2 piece edgeboard connectors, a metal shell assembly is designed and tooled. The metal shells are made of aluminum alloy per QQ The insert material is Diallyl phthalate, Polyphenylene sulfide (Ryton) or Liquid rystal Polymer (LP). The technical and performance data is essentially the same as that shown for the MDM Series on page 25. These are rugged, durable connectors and are ideal for use in areas of high density packaging and where frequent connect and disconnects are required. Designed initially for applications in airborne data recorders, computers and associated equipment in navigational systems. The mother board connector can be ordered to fit any pattern on the circuit board. The units can also be provided with contacts on.100 [2.54] spacing which results in.100 [2.54] grid pattern. Electrical ontact Resistance The average mated contact resistance is 4 milliohms, with a maximum value of 8 milliohms. The average resistance value at 100 microvolts is 4.8 milliohms. Dielectric Withstanding Voltage 800 V RMS at sea level (600 for solder pots); 200 V RMS at 70,000 feet [21,336m] (150 for solder pots). Durability Less than the maximum allowable, 8 milliohms after 500 mating cycles. Insulation Resistance Greater than 5,000 megohms at room ambient temperature. Maximum urrent arrying apacity No. 24 contact 3 amperes. Mechanical ontact Engaging & Separation Forces 5.0 oz. max. [1.39N] (eng.), 0.5 oz. min. [.14N] (sep.). Environmental Temperature Range -67 F to 302 F [-55 to +150 ] for Diallyl Phthalate; -67 F to 257 F [-55 to +125 ] for Polyphenylene Sulfide. Vibration No discontinuity in excess of 1 µ sec. during twelve 20 minute sweeps from 10 to 2000 PS at.06 double amplitude or 20 G forces, whichever is less. Materials and Finish Shells High grade aluminum alloy, electroless nickel plated per MS Insulator Diallyl Phthalate per MIL- M-14, Type SDG-F (for 128 & 184); Polyphenylene Sulfide per MIL-M (for 40, 44, 80, 110 & 152), or Liquid rystal Polymer per STM D5138. ontacts Pin (low force): beryllium and OFH copper, gold plated. Socket (low force): opper alloy, gold plated. Hardware orrosion resistant stainless steel passivated. 42

47 Rectangular onnectors MEM Series Metal Shell Edgeboard onnectors (ontinued) Mother oard (Pin Side) 40, 44, 80, 110 & 128 Positions.050 [1.27] Typ..250 [6.35] Hex Polarizing Key 2 Supplied (Loose Packed) #2-56 UN-2 Thd. Rectangular onnectors.050 [1.27] Polarizing Key Location 2 Plcs. Pin ontact/lead ssy..400 [10.16] Epoxy Insulator ssy [1.27] Typ. Ø Thru [ ] 2 Plcs..100 [2.54] Typ WG opper Wire, Gold Plated, Solder Dipped.075 [1.91] Typ..075 [1.91] Typ. Section [ ] Typ [ ] Typ. Dimensions for.062 [1.57] P oard No. of ontacts ±.010 ±.005 [±.254] [±.127] Note: For P oards of different widths, consult Tyco Electronics. Items in bold italic are qualified to MIL-DTL onfiguration shown is per MIL-DTL-55302/

48 Rectangular onnectors MEM Series Metal Shell Edgeboard onnectors (ontinued) Daughter oard (Socket Side) 40, 44, 80, 110 & 128 Positions [ ] 2 Plcs. Ø Thru Hole [ ] 2 Plcs. ore Ø.187 [4.75] x.045 [1.14] Deep ( Side Only).125 [3.18] 2 Plcs..250 [6.35] Ø.187 Thru 1 Wall [4.75] Section [1.52] 3 Plcs. 24 WG opper Wire, Gold Plated.030 [0.76] Max..150 Min. [3.81] Solder Dip Typ..180 [4.57] Plcs. [8.38] 2 Plcs..275 [6.99].050 [1.27] Typ..250 [6.35] Max..200 ±.015 [5.08 ±.381].071 Min. [1.80] at Epoxy Insulator ssy Plcs. [6.35].050 [1.27] Retaining Pin Holes 4 Plcs..050 Typ. [1.27] 2 1 Skt. ontact/ Lead ssy. Section - Polarizing Key Location 2 Plcs. Note: oard thickness.070 [1.78] Max. 1 2 Polarizing Key 2 Supplied (Loose Packed) Retaining Pin 4 Supplied (Loose Packed) How To Specify S Solder pots for 26 WG max. Z Wire layout as illustrated. X Special, does not fit description below. onnector Series ME M1 128 L 6 L Lead Length in Inches (min.) Material M1 Metal Shell Layout 40, 44, 80, 110, 128, 152, 184 ontact Type L Low Force Pin (Mother oard onnector) SL Low Force Socket* (Daughter oard onnector) Insulation olor or Finish 1 ll white wire 4 Gold plated 7 olor coded per 2 ll yellow wire 5 Tin dipped gold plated MIL-STD-681, System 1 3 ll gray wire 6 are (unfinished) 8 Special color code 9 Ten solid color repeating (starts with black) Wire Type * Type E, 7 strand *D Type ET, 19 strand G 19 strand per MIL /11 * Type ET, 7 strand F 7 strand per MIL /11 26 WG, 24 WG * Type E, 19 strand (#28 WG only) L opper, solid Q Stranded per MIL-W-22759/33 *Per MIL-W Items in bold italic are qualified to MIL-DTL onfiguration shown is per MIL-DTL-55302/121. Wire Size 4 24 WG 5 25 WG 6 26 WG 8 28 WG 0 30 WG Polarization Hexagonal hardware is supplied with connector. Mounting Standard mounting holes are shown. onsult Tyco Electronics for modifications.

49 Rectangular onnectors MEM Series Metal Shell Edgeboard onnectors (ontinued) Mother oard (Pin Side) 152 & 184 Positions /2 Polarizing Key Location 2 Plcs..075 [1.91] #2-56 UN-2 Thd..343 [8.71].400 [10.16] Retaining Pin Hole 4 Plcs. Daughter oard (Socket Side) 152 & 184 Positions.343 [8.71].500 [1.27].250 [6.35] D 2 Plcs Typ. [1.27] [6.86] Ø [ ] Thru 'ore Ø.187 [4.75] x.045 [1.14], 3 Plcs., ( Side Only) Insulator Subassembly 25 WG opper Wire, Gold Plated, Solder Dipped Hex Polarizing Key 2 Supplied (Loose Packed) [1.91] Typ..075 [1.91] Typ. Section Plcs. [3.18].060 [1.52] 3 Plcs. Pin ontact/ Lead ssembly Typ. [ ] Typ. [ ] Rectangular onnectors Min. [1.80] Section - Ø.187 Thru [4.75] 3 Plcs. ( Side Only) Plcs. [6.35].700 [17.78] D /2 2 Plcs..500 [12.70].030 Max. [.762].250 Max. [6.35] Typ. 24 WG opper Wire, Gold Plated.200 Typ. [5.08].242 [6.15].075 [1.91] Typ. Retaining Pin Hole 4 Plcs. Polarizing Key Locations 2 Plcs [1.35] Min. at Insulator ssy. Section Min. [3.81] Typ. Solder Dip Epoxy Skt. ontact/ Lead ssy..050 [1.27] Typ Polarizing Key 2 Supplied (Loose Packed) Retaining Pin 4 Supplied (Loose Packed) No. of ontacts ±.010 ±.005 D [±.254] [±.127] asic asic

50 Rectangular onnectors JKMTE MJ(M) Series Plastic (Metal) Shell enter Jackscrew onnectors JKMTE onnectors are the first Twist Pin contact assemblies designed to accommodate center jackscrews that provide jacking action when mating or unmating the connectors. lthough the units were initially developed for high density cord-to-cord or in-line applications, either plug or receptacle can be adapted to a P board. The jacking hardware consist of a threaded bushing and a captivated jackscrew which are made of corrosion resistant stainless steel and are molded into the JKMTE onnector Insulator. The twist pin contacts are on.050 [1.27] center-tocenter linear spacing and contact terminations are available in solid wire or stranded wire. There is a high degree of flexibility with this JKMTE connector design for commercial or military applications. vailable om MJ(M) Series Plastic (Metal) Shells. JKMTE Technical & Performance Data for Plastic Shell JKMTE MJ Series Plastic Shell enter Jackscrew onnectors Electrical ontact Resistance The average mated contact resistance is 4 milliohms, with a maximum value of 8 milliohms, using standard 24 WG solid copper leads when measured directly behind the crimp joints of the mated pin and socket contacts. The average resistance value at 100 microvolts is 4.8 milliohms. Dielectric Withstanding Voltage (60 Hz rms room temperature) Solder Pots: 600 V at sea level; 150 V at 70,000 feet [21,336m] Wire Terminations: 750 V at sea level; 200 V at 70,000 feet [21,336m]. orrosion Resistance (Per MIL-STD- 202, Method 101, ondition ) oth mated and unmated samples do not exceed the maximum allowable contact resistance (8 milliohms) when subjected to the 48 hour salt spray test. Durability The contact resistance after 500 mating cycles is less than the maximum allowable, 8 milliohms. Insulation Resistance Greater than 5,000 megohms at room temperature for the materials listed under Materials. Maximum urrent arrying apacity No. 24 contact 3 amperes. It must be recognized, however, that all the wires to a connector will not carry their maximum current under all environmental conditions due to wire temperature. Mechanical ontact Engaging & Separation Forces 8.0 oz. max. [2.22N] (eng.), 0.5 oz. min. [.14N] (sep.). Environmental Temperature Range (Operating) -67 F to 257 F [-55 to 125 ]. Vibration (Per MIL-STD-202, Method 204-, ondition D) No discontinuity in excess of 1 µ sec. during twelve 20 minute sweeps from 10 to 2000 PS at.06 double amplitude or 20 G forces, whichever is less. Materials Insulator Glass filled Nylon Type 6. ontacts Pin contact: copper alloy and beryllium copper alloy make up the complete construction; Socket contact: copper alloy. Hardware orrosive resistant stainless steel. Finishes ontacts Standard finish is [ ] gold over copper flash per MIL-G-45204, Type II. Hardware Passivated Per QQ-P & 14 ontact Layout.165 [4.19].285 [7.24].570 [14.00].075 [1.91].050 [1.27] Typ..165 [4.19].235 [5.97].470 [11.94].075 [1.91].050 Typ. [1.27].120 [3.05] Guide Pin 2 Plcs. ushing.300 [7.62] Jackscrew (.050 hex wrench req'd to turn screw) Layout 10 Layout Receptacle Plug

51 Rectangular onnectors JKMTE MJ Series Plastic Shell enter Jackscrew onnectors (ontinued) 26, 38 & 46 ontact Layout.165 [4.19] [32.26].635 [16.13].075 [1.91].050 [1.27] Typ [29.72].165 [4.19].585 [14.86].165 [4.19].870 [22.10].438 [11.13].120 [3.05] Jackscrew #0-80 UNF-2 Thd..300 [7.62] Guide Pin ushing #0-80 UNF-2 Thd. 42 Layout 38 Layout 26 Layout Receptacle Section - Plug.285 [7.24].050 [1.27] Typ..050 [1.27] Typ..120 [3.05].300 [7.62] Rectangular onnectors How To Specify.610 [15.49].305 [7.75] ushing #0-80 UNF-2 Thd. Guide Pin 46 Layout Receptacle Plug Jackscrew #0-80 UNF-2 Thd. S Solder pot for 26 WG maximum stranded wire. X Special, does not fit description below. 2 onnector Series MJ 2 10 P 4 L Lead Length in Inches (min.) Shell Material 2 Glass filled nylon, type 6/10, blue Layout (Positions) 10, 14, 26, 38, 42, 46 ontact Type P Pin S Socket Insulation olor or Finish 1 ll white wire 4 Gold plated 7 olor coded per 2 ll yellow wire 5 Tin dipped gold plated MIL-STD-681, System 1 3 ll gray wire 6 are (unfinished) 8 Special color code 9 Ten solid color repeating (starts with black) Wire Type * Type E, 7 strand *D Type ET, 19 strand G 19 strand per MIL /11 * Type ET, 7 strand F 7 strand per MIL /11 26 WG, 24 WG * Type E, 19 strand (#28 WG only) L opper, solid Q Stranded per MIL-W-22759/33 *Per MIL-W ontact rrangement as Viewed from the Engaging Face of the Pin Side Wire Size 4 24 WG 5 25 WG 6 26 WG 8 28 WG 0 30 WG Guide Pin Guide Pin Guide Pin Guide Pin Guide Pin Guide Pin 38 Positions 26 Positions 10 Positions Guide Pin Guide Pin 46 Positions 14 Positions 42 Positions Guide pin locations illustrated are for standards configuration only. ny location is available. Guide pins are supplied in socket connectors and blank cavities are in pin connector. Guide Pin 42 47

52 Rectangular onnectors JKMTE MJM Series Metal Shell enter Jackscrew onnectors Technical and Performance Data for Metal Shell Electrical ontact Resistance The average mated contact resistance is 4 milliohms, with a maximum value of 8 milliohms, using standard 24 WG solid copper leads when measured directly behind the crimp joints of the mated pin and socket contacts. The average resistance value at 100 microvolts is 4.8 milliohms. Dielectric Withstanding Voltage (60 Hz rms room temperature) Solder Pots: 600 V at sea level; 150 V at 70,000 feet [21,336m]. Wire Terminations: 750 V at sea level; 200 V at 70,000 feet [21,336m]. orrosion Resistance (Per MIL- STD-202, Method 101, ondition ) oth mated and unmated samples do not exceed the maximum allowable contact resistance (8 milliohms) when subjected to the 48 hour salt spray test. Durability The contact resistance after 500 mating cycles is less than the maximum allowable, 8 milliohms. Insulation Resistance Greater than 5,000 megohms at room temperature for the materials listed under Materials. Maximum urrent arrying apacity No. 24 contact 3 amperes. It must be recognized, however, that all the wires to a connector will not carry their maximum current under all environmental conditions due to wire temperature. Mechanical ontact Engaging & Separation Forces 8.0 oz. max. [2.22N] (eng.), 0.5 oz. min.[.14n] (sep.). Environmental Temperature Range (Operating) -67 F to 302 F [-55 to 150 ] for Diallyl Phthalate. Vibration (Per MIL-STD-202, Method 204-, ondition D) No discontinuity in excess of 1 µ sec. during twelve 20 minute sweeps from 10 to 2000 PS at.06 double amplitude or 20 G forces, whichever is less. Materials Insulator Diallyl Phthalate per MIL- M-14, Type SDG-F. ontacts Pin contact: copper alloy and beryllium copper alloy make up the complete construction; Socket contact: copper alloy. ody Shells Pin body shell: stainless steel, Types 304, ondition per QQ-S-766; Socket body shell: aluminum alloy per QQ--591, -380 alloy. Hardware orrosion resistant stainless steel. Finishes ontacts Standard finish is [ ] gold over copper flash per MIL-G-45204, Type II. ody Shells Pin body shell: passivated per MIL-F (E-300); Socket body shell: electroless nickel per MS 204, lass 3, except thickness is 0.001/ [0.025/0.038]. Hardware Passivated per QQ P 35. Note: Insulators are molded into their metal shells No bonded joint is used. Plug (Pin Side) Shell Type M1 Polarization *Standard material used unless otherwise specified. Polarization Jackscrew 2-56 UN-2 Thd..300 [7.62].199 [5.05] ontact Pin Shell Insert.180 [4.57].187 [4.75].046 Rad. [1.17] Typ. # Hex [1.98] Socket #1.350 [8.89].125 Rad. [3.18] Typ. # [21.08] #41 Jackscrew 48

53 Rectangular onnectors JKMTE MJM Series Metal Shell enter Jackscrew onnectors (ontinued) Receptacle (Socket Side) Shell Type M1.050 S [1.27] Typ..830 [21.08].125 Sq. [3.18] Polarization ushing Shell Type M2 #41 # Rad. [3.18] 2 Plcs. #41 # S [1.27] Typ..030 Rad. [0.76] 4 Plcs..046 Rad. [1.17] 2 Plcs. #1 #10 Polarization Plcs. [1.27] [9.02] [ ] 2 Plcs. #1 #10 Rectangular onnectors ushing Stainless Steel 2-56 UN-2 Thd..094 Rad. [2.39] 2 Plcs..070 ±.005 [1.78 ±0.13] 2 Plcs..200 ±.005 [5.08 ±0.13] 2 Plcs. Interfacial Seal Silicon Rubber Insert.094 ±.005 [2.39 ±0.13] ontact Skt. Full Rad. Typ. 2 Plcs..108 ±.005 [2.74 ±0.13].310 [7.87] 2 Plcs. 2 How To Specify S X Solder pot for 26 WG maximum stranded wire. Special, does not fit description below. MJ M1 JKMTE onnector Series Shell Material M1 Metal Shell (Standard) M2 Metal Shell (Special receptacles only) Polarizing Position, Layout (Positions) 48 ontact Type P Pin S Socket 48 P 4 L Lead Length in Inches (min.) Wire Type Insulation olor or Finish 1 ll white wire 4 Gold plated 7 olor coded per 2 ll yellow wire 5 Tin dipped gold plated MIL-STD-681, System 1 3 ll gray wire 6 are (unfinished) 8 Special color code 9 Ten solid color repeating (starts with black) * Type E, 7 strand *D Type ET, 19 strand G 19 strand per MIL /11 * Type ET, 7 strand F 7 strand per 26 WG, 24 WG * Type E, 19 strand MIL /11 L opper, solid (#28 WG only) Q Stranded per MIL-W-22759/33 *Per MIL-W Wire Size 4 24 WG 5 25 WG 6 26 WG 8 28 WG 0 30 WG 49

54 Rectangular onnectors MS Series Strip onnectors Strip onnectors MS Plastic Strip.070 [1.78] Section - Lead Epoxy Insulator Pin ontact Plug.050 Typ. [1.27].283 [7.19].035 Max. [.889] For Solid Wire.125 Max. [3.18] For Insulated Wire.070 [1.78] Skt. ontact Insulator Epoxy Lead Section - Receptacle.050 Typ. [1.27].100 [2.54].035 Max. [.889] For Solid Wire.125 Max. [3.18] For Insulated Wire Part No. y Size Max. MSR*-1**.070 [1.78] MSR*-2**.120 [3.05] MSR*-3**.170 [4.32] MSR*-4**.220 [5.59] MSR*-5**.270 [6.86] MSR*-6**.320 [8.13] MSR*-7**.420 [10.67] MSR*-8**.420 [10.67] MSR*-9**.470 [11.94] MSR*-10**.520 [13.21] MSR*-11**.570 [14.48] MSR*-12**.620 [15.75] MSR*-13**.670 [17.02] MSR*-14**.720 [18.29] MSR*-15**.770 [19.56] MSR*-16**.820 [20.83] MSR*-17**.870 [22.10] MSR*-18**.920 [23.37] MSR*-19**.970 [24.64] MSR*-20** [25.91] MSR*-21** [27.18] MSR*-22** [28.45] MSR*-23** [29.72] MSR*-24** [30.99] MSR*-25** [32.26] MSR*-26** [33.53] MSR*-27** [34.80] MSR*-28** [36.07] MSR*-29** [37.34] MSR*-30** [38.61] Part No. y Size Max. MSR*-31** [39.88] MSR*-32** [41.15] MSR*-33** [42.42] MSR*-34** [43.69] MSR*-35** [44.96] MSR*-36** [46.23] MSR*-37** [47.50] MSR*-38** [48.77] MSR*-39** [50.04] MSR*-40** [51.31] MSR*-41** [52.58] MSR*-42** [53.85] MSR*-43** [55.12] MSR*-44** [56.39] MSR*-45** [57.66] MSR*-46** [58.93] MSR*-47** [60.20] MSR*-48** [61.47] MSR*-49** [62.74] MSR*-50** [64.01] MSR*-51** [65.28] MSR*-52** [66.55] MSR*-53** [67.82] MSR*-54** [69.09] MSR*-55** [70.36] MSR*-56** [71.63] MSR*-57** [72.90] MSR*-58** [74.17] MSR*-59** [75.44] MSR*-60** [76.71] Part No. y Size Max. MSR*-61** [77.98] MSR*-62** [79.25] MSR*-63** [80.52] MSR*-64** [81.79] MSR*-65** [83.06] MSR*-66** [84.33] MSR*-67** [85.60] MSR*-68** [86.87] MSR*-69** [88.14] MSR*-70** [89.41] MSR*-71** [90.68] MSR*-72** [91.95] MSR*-73** [93.22] MSR*-74** [94.49] MSR*-75** [95.76] MSR*-76** [97.03] MSR*-77** [98.30] MSR*-78** [99.57] MSR*-79** [100.84] MSR*-80** [102.11] MSR*-81** [103.38] MSR*-82** [104.65] MSR*-83** [105.92] MSR*-84** [107.19] MSR*-85** [108.46] MSR*-86** [109.73] MSR*-87** [111.00] MSR*-88** [112.27] MSR*-89** [113.54] MSR*-90** [114.81] Part No. y Size Max. MSR*-91** [116.08] MSR*-92** [117.35] MSR*-93** [118.62] MSR*-94** [119.89] MSR*-95** [121.16] MSR*-96* [122.43] MSR*-97** [123.70] MSR*-98** [124.97] MSR*-99** [126.24] MSR*-100** [127.51] MSR*-101** [128.78] MSR*-102** [130.05] MSR*-103** [131.32] MSR*-104** [132.59] MSR*-105** [133.86] MSR*-106** [135.13] MSR*-107** [136.40] MSR*-108** [137.67] MSR*-109** [138.94] MSR*-110** [140.21] MSR*-111** [141.48] MSR*-112** [142.75] MSR*-113** [144.02] MSR*-114** [145.29] MSR*-115** [146.56] MSR*-116** [147.83] MSR*-117** [149.10] MSR*-118** [150.37] MSR*-119** [151.64] MSR*-120** [152.91] How To Specify S Solder pot for 26 WG maximum stranded wire. X Special, does not fit description below. 50 MS R 2 onnector Series Insulator Type and Material R Polyphenylene Sulfide per MIL-M or Liquid rystal Polymer per STM D5138 ontact Locations 1 ontact in every cavity 2 ontact in every other cavity 1, 3, ontact in every cavity except guide pin cavity in each end cavity 4 ontact in every other cavity 2, 4, 6... and guide pin in each end cavity X Other than above Standard Polarization Guide pins are in socket connectors. lank cavities are in pin connectors. Number of avities (120 Max.) ontact Type P Pin S Socket 26 P Lead Length in Inches (min.) Insulation olor or Finish 1 ll white wire 4 Gold plated 7 olor coded per 2 ll yellow wire 5 Tinned MIL-STD-681, System 1 3 ll gray wire 6 are (unfinished) 8 Special color code 9 Ten solid color repeating (starts with black) Wire Type * Type E, 7 strand *D Type ET, 19 strand G 19 strand per MIL-22759/11 * Type ET, 7 strand F 7 strand per 26 WG, 24 WG * Type E, 19 strand MIL-22759/11 M opper, solid (#28 WG only) Q Stranded per MIL-W-22759/33 *Per MIL-W Wire Size 4 24 WG 5 25 WG 6 26 WG 8 28 WG 0 30 WG

55 Rectangular onnectors High Density Standard Module (HDSM) onnectors Features Designed for surface mounting on both daughter board and mother board for increased circuit density asic design offers 38, 78, 120, 152, 200, 304, and 400 contact designs High reliability twist pin and socket per MIL-DTL and MIL-DTL onnector permits lateral movement of daughter board to accommodate clamping of the heatsink Plated through-hole mounting available vailable with flying leads Extender card option available Typical mating force for 304 contacts is 38 pounds Designed to withstand vapor phase soldering Two rotatable (six position) polarizing keys are provided accommodating 36 possible combinations Jackscrew hardware available; consult Tyco Electronics Different modular inserts may be specified to include coax (Pixi/on), fiber optic or other special contacts Inserts may be partially or fully loaded and installed in the connector shell in various configurations Rectangular onnectors The MIRODOT HDSM connector is designed for 4 row.050 [1.27] pitch density with a special low force twist pin that meets all requirements of MIL- DTL and MIL-DTL This high density connector allows the use of construction to double the packaging density with surface mount capability. 2 Performance Data Summary Electrical ontacts Pin 24 WG twist pin, Socket #24 WG, Wire range 24 WG to 32 WG solid and stranded. ontact Resistance (voltage drop) 25 millivolts max. at 3 amps, 25 ± 3. urrent Rating 3 amps max. per contact Dielectric Withstanding Voltage Volts RMS 60 Hz at room ambient: 600 V for solder pots at sea level. 150 V for solder pots at 70,000 ft. [21,336m] 500 V for wire terminations at sea level. 200 V for wire terminations at 70,000 ft. Insulation Resistance 5,000 megohms min. at room ambient. Magnetic Permeability 2 mµ max. Mechanical ontact Spacing.050 [1.27] centers ontact Engagement & Separation 5.0 oz max. [1.39N] (eng.) 0.5 oz. min. [.14N] 3.5 oz. typ. [.97N] (sep.) force. Materials and Finishes ontacts opper alloy plated with [ ] gold over copper flash per MIL-G-45204, Type II. Metal Shell Insulator Liquid rystal Polymer (LP) per STM D5138 or Polyphenylene Sulfide per MIL-M ody Shell luminum alloy plated Nickel, electroless per MIL Environmental Temperature Range -67 F to 257 F [-55 to +125 ]. Vibration No discontinuity in excess of 1 micro sec. when tested in accordance with MIL-STD-1344, Method 2005, test ondition IV. Insulator Retention Inserts will withstand a 50 lb. per square inch load in either direction. Shock No discontinuity in excess of 1 micro sec. when tested in accordance with MIL-STD-1344, Method 2004, test ondition E. Durability No mechanical or electrical defects detrimental to the function of the connectors after 500 cycles of mating and unmating. (aution: Mating force increases during durability cycling may be noted). Humidity fter exposure to humidity as specified by MIL-STD-1344, Method 1002, Type II, IR shall be 1 megohm min. immediately following step 7a of Method 1002 and 1000 megohms min. after 24 hours of conditioning per Method Salt Spray onnectors shall meet the performance requirements of contact resistance, mating and unmating forces, and contact retention after being subjected to the 48-hour 5% solution salt spray test per MIL-STD-1344, Method 1001, ondition. rimp Termination Tensile Strength *Unassembled contacts with crimped stranded wire terminations. Wires will not pull out of contacts when the following axial loads are applied: 24 WG, 5 lbs., 26 WG, 4 lbs., 28 WG, 3 lbs. 51

56 Rectangular onnectors High Density Standard Module (HDSM) onnectors (ontinued).025 Typ. [0.64].050 Typ. [1.27].050 Typ. [1.27].050 [1.27].150 [3.81].360 [9.14] Flat Screw 2-56 UN-2 Thd. Flat Screw 2-56 UN-2 Thd. 38 & 78 Position Plug Pin Side Keying Hardware 30 (38) (50) 30 (38) (50).025 [0.64] 9 (19) 10 (20) Socket Side Receptacle Polarizing Key 2-56 UN-2 Thd. Plug Polarizing Key 2-56 UN-2 Thd , 152 & 200 Position Plug Mtg. Nut/Polarizing Key (ustomer Installed) 2 Supplied (Packed Loose).050 [.127] Ref. 16 (20) (26) 15 (19) (25) 16 (20) (26) 15 (19) (25).050 [.127] 1 End av. 1 Near Side End av. D1 Far Side }Marked s Shown Insulator Pin ontact [7.37] Ref. Housing [12.83].290 [7.34].165 [4.19] 1 1 D.200 [5.08].350 Min. [8.89] Ref UN-2 Thd. x.125 [3.17] DP.350 [8.89] Min. Section - Lead Organizer 28 WG Wire Solder Dipped Ø.010 [0.25] (ll Leads) [7.62] [12.50] Max. 10 (20) D9 (19) 1 30 (38) (50) 16 (20) (26) 15 (19) (25) D1 D30 (38) (50) D16 (20) (26) D15 (19) (25) (38 & 78) (120, 152 & 200) 1 D1.025 Typ. [0.64].050 [1.27] Typ..050 [1.27] 2 Plcs..250 [6.35].050 [1.27].150 [3.81] D.360 [9.14] Mtg. Nut/Polarizing Key 304 & 400 Position Plug (ustomer To Install) 2 Supplied (Packed Loose) 76 (304) 100 (400) Near Side Marking D76 (304) D100 (400) Far Side Marking 1 Near Side Marking D1 Far Side Marking.290 [7.34].290 Ref. [7.37] Pin ontact Insulator Housing *** [12.83].165 [4.19] Lead Organizer D75(99) 75(99) D76(100) 76(100).050 [1.27] Ref. D Ref. Standoff, 2-56 UN-2 L Thd. x.125 [3.17] Min. Thd. (2 Plcs.) [6.35] [3.18] Ref. 58(76) 58(76) 59(77) 59(77) 57(75) 57(75) 56(74) 56(74) 39(51) 39(51) 40(52) 40(52) 38(50) 38(50) 37(49) 37(49) 20(26) 20(26) 21(27) 21(27) 19(25) 19(25) 18(24) 18(24) UN-2 Thd. x.125 [3.17] DP 28 WG Wire Solder Dipped fl.010 [0.25] (ll Leads) [5.59].060Thick [1.52].062 [1.58] Section [8.89] Min [8.64] [11.68].590 Max. [14.99] 52 76(100) D76(100) 75(99) 59(77) D59(77) 58(76) 56(74) D56(74) 57(75) D40(52) 40(52) D39(51) D37(49) 37(49) D38(50) 21(27) D21(27) 20(26) 18(24) D18(24) 19(25) D75(99).025 D58(76) D57(75) 39(51) 38(50) D20(26) D19(25) Typ..050 [0.64] D Typ. Typ. [1.27] Typ. 2 Plcs..100 [1.91] [1.27] Typ. [2.54] Size 304 & 400 (Terminal Ident In Parentheses Is For Size 400) D4 4 D3 3 1 D1 2 D2.100 [2.54]

57 Rectangular onnectors High Density Standard Module (HDSM) onnectors (ontinued) D9(19) 10(20) D [5.74] Typ. D D1 1 Flat Screw, 2 Supplied 2-56 UN-2 Thd. (Packed Loose) 10(20) 9(19).220 [5.59] E -- Ø.132 [3.35].195 [4.95] (38 & 78) I.D. Of ushing Ø [ ] Section Torlon ushing (4 Rqd) 38 & 78 Position Receptacle.645 [16.38].025 [0.64] (120, 152 & 200).050 [1.27] Ref..160 [4.06] D Ref. 9(38)19(76)30(120) 38(152)50(200) Near Side Marking D9(38)D19(76)D30(120) D38(152)D50(200) Far Side Marking.025 [0.64] Typ..050 Typ. [1.27].050 [1.27] 120, 152 & 200 Position Receptacle 1 1 Ø.008 M [.2.03] M Typ. t.545 [13.84] Dim. Full Radius Typ..370 [9.40] [17.65] [13.84] 1 Near Side Marking D1 Far Side Marking.050 [1.27].150 [3.81] Polarizing Key, 2 Supplied 2-56 UN-2 Thd. (Packed Loose).360 [9.14] H Ref. Dim. G Gage Dim. F Free State reak way Notch (ll Leads) L Of Mtg. Hole.348 [8.84] Socket ontact Section Radius [1.27] Typ. L Of Radius Of Leads.050 [1.27].025 Typ. [0.64] Size 38 & WG, Solder Dipped.188 ±.015 Typ. [4.78 ± 0.38] Housing Insulator.195 [4.95] Ref [0.64] Typ. [1.27] Ref. [4.95] D Typ. Size 120, 152 & 200 Recommended P Footprint Pattern Rectangular onnectors 2 Flat Head Screw (2 Plcs.) 2-56 UN-2 Thd. (Packed Loose, ustomer To Install) Ø.008 M [.2.03] M (Typ.) t.545 [13.84] Dim..025 [0.64] Typ..250 [6.35].160 Typ. [4.06] 76(304) 100(400) Near Side Marking D76(304) D100(400) Far Side Marking.250 [6.35] Full Radius Typ. /2 (2 Plcs.) 1 D1 (2 Plcs.) D (4 Plcs.).050 Typ. [1.27].050 [1.27] 2 Plcs..360 [9.14] [5.74].370 [9.40] [16.38].695 [13.84] [17.65] 1 Near Side Marking.025 Typ. D1 Far Side Marking [0.64].050 Typ. [1.27] H Ref. Dim. G Gage Dim. F Free State reak way Notch (ll Leads) L Of Mtg. Hole.348 [8.84] Socket ontact Section - 32 WG, Solder Dipped.050 Radius [1.27] Typ. L Of Radius Of Leads ±.015 Typ. [1.27] [4.78 ± 0.38] Housing Insulator Polarizing Key (2 Plcs.) (Packed Loose, ustomer To Install).050 [1.27].150 [3.81].018 [0.46].035 [0.89] 1/2 (2 Plcs.).195 [4.95] D Typ. 2 Plcs. (2 Plcs.) Size 304 & 400 Recommended P Footprint Pattern 53

58 Rectangular onnectors High Density Standard Module (HDSM) onnectors (ontinued) No. of avities Dim. Dim. Dim. D Dim. Single ay Double ay How To Specify S Solder pot Z oke ottle Termination (Receptacle only, see Table I) Z 4 Row Wire Termination (Plug only) Z 8 Row Wire Termination (Plug only) X Special Wire and/or other than above onnector Series HDSM L 4 L ontact Location 1 Full complement of contacts 2 ontacts in outside row only 3 ontacts in inside row only 4 Other than above or special housing Layout 38, 78, 120, 152, 200, 304 & 400 ontact Type L Low Force Pin SL Low Force Socket Wire Size 4 24 WG 5 25 WG 6 26 WG 8 28 WG 0 30 WG Wire Type Wire Length Wire olor/finish 1 ll white 4 Gold plated 7 olor coded per MIL-STD-681, 2 ll yellow 5 Tin dipped gold plated System 1 3 ll gray 6 are (unfinished) 8 Special color code 9 Ten basic color repeating on each row (,,, D) (starting with black) * Type E, 7 strand *D Type ET, 19 strand G 19 strand per MIL-W-22759/11 * Type ET, 7 strand F 7 strand per MIL-W-22759/11 26 WG, 24 WG * Type E, 19 strand (#28 WG only) L opper, solid Q Stranded per MIL-W-22759/33 *Per MIL-W Table I Dash No Gap etween ushing "E" F Dim. G Dim. H Dim. (Ref.)

59 ircular onnectors Introduction High Density ircular onnectors Product Facts High density, light-weight Multi-Pin ircular onnectors feature a crimp contact retention method, requiring no insertion or removal tools Reverse gender available Ideal for harsh environment Sealed Silicon rubber grommet/o-ring Unsealed No grommet/ o-ring Meets MIL Standards (high quality) but is not QPL qualified Ideally suited to applications where many conductors must be accommodated in a minimum of space with minimum weight MR Series onnectors are non-magnetic ontact rating 2.5 ircular onnectors Our high density, lightweight Multi-Pin ircular onnectors are the industry s most advanced and are ideally suited to applications where many conductors must be accommodated in a minimum of space with minimum weight. ll series of connectors feature a crimp contact retention method, requiring no insertion or removal tools. The MR 43 Series onnectors conform to applicable performance requirements of MIL and has seen extensive service on many leading aerospace and ground support equipment programs. The MR 53 Series onnectors, designed to conform to the USF high reliability specification MIL , as offers high density connector performance. The positive lock coupling mechanism, combined with our exclusive floating interfacial seal, offers outstanding performance under rigorous service conditions. The MR 63 Series onnectors, our ayonet oupling Series, accommodates all insert patterns and layouts available in the MR 43 Series onnectors, MR 53 Series onnectors, and RMD Series onnectors. ll insert assemblies are completely interchangeable. Lighter in weight and smaller in size than any comparable connector on the market, it requires up to 50% less engagement/ separation force. onversion to bayonet coupling shell from MR 43 Series onnectors or MR 53 Series onnectors is done without tools by merely transferring the contacts and insert assemblies into the MR 63 Series onnectors shell. The newest addition to the Multi-Pin product line is the MR 73 Series onnectors. The twist pin ircular onnector combines the lightweight, bayonet 3 55

60 ircular onnectors Introduction (ontinued) coupling feature of the MR 63 Series onnectors with the twist pin high density, center-to-center contact spacing of [1.65] inch. The utilization of 22 WG twist pin and socket contacts provide for 50% greater contact densities than presently offered in the MR 43 Series onnectors, MR 53 Series onnectors, or MR 63 Series onnectors. The MQR Series is a line of circular quick disconnect connectors for rugged environmental use. onsult Tyco Electronics for detailed information. SHM Receptacle MR 43 Series onnectors & MR 53 Series onnectors Mated MR 53 Series onnectors SHM Receptacle MR 43 Series onnectors & MR 53 Series onnectors Mated MR 63 Series onnectors Mated MR 43 Series onnectors 56

61 ircular onnectors MR 43 Series onnectors General Information high density (.080 [2.03] contact centers), lightweight, subminiature, cylindrical connector series featuring crimp contacts and fingertip, push-pull, quick disconnect coupling. This series conforms to the applicable performance requirements of MIL and is available in unsealed, environmentally sealed, and hermetic types. large assortment in insert arrangements accommodating WG 12 through 32 gauge wire and miniature coaxial cables is available for the design engineer s choice. The contacts are retained by shoulder entrapment and can be crimped with the standard M22520 tools, using appropriate locators. This proven series of connectors has a long history of outstanding performance on many military and aerospace programs. MR 43 Series onnectors are ideal for applications where high performance must be achieved at low cost. Materials and Finishes Service and Performance Data I. Electrical Electrical Ratings MR 43 Series onnector housings and quick disconnect couplings are machined from bar stock aluminum to combine maximum strength with minimum weight. Threaded couplings are machined from nonmagnetic, stainless steel bar stock for durability of the coupling threads. ontacts are manufactured from high conductivity copper alloys which have been selected for low contact resistance over the operating range of the urrent RatingDielectric Working Voltage ontact mperes, Withstanding Sea 70,000 ft. Size Max., Voltage (RMS) Level [21,336 m] lt. 22 WG 5 amps WG 20 amps WG 50 amps ohm 3 amps ohm 3 amps ohm 3 amps onsult nomograph. II. Mechanical Durability: 500 ycles Mate/Unmate. oupling/uncoupling Forces and Tightening Torques: Shell oupling/ Uncoupling Tightening Torque (In-Lbs.) Size Force (In-Lbs.) Max. Retaining Nut Mounting Nut 13 [57.8 N] 20, Max. [2.26 Nm] [3.39 Nm 5.08 Nm] 17 [75.6 N] 20, Max. [2.26 Nm] [4.52 Nm 6.21 Nm] 21 [93.4 N] 20, Max. [2.26 Nm] [6.21 Nm 7.91 Nm] Operating Temperature: -85 F to 257 F [-65 to +125 ]. connectors. Inserts are molded from flame-resistant, glass-filled diallyl phthalate, meeting STM D5948 requirements. ll resilient parts are made of high temperature, silicone rubbers. Fuel resistant compounds are used where swelling affects the performance of the connector. ll materials are carefully selected for their non-magnetic properties. The standard finish is clear, non-conductive anodize on ontact Size connector housings and quick disconnect couplings. For threaded coupling applications, aluminum components are hard, black anodized, and stainless steel plug coupling is passivated with black oxide finish. onductive finish modifications include gold, cadmium, and iridite finishes. ontacts are gold plated per MIL-G requirements. See page 63 for modification information. Wire Size 22 22, 24, , 18, WG 50 ohm 50 ohm 75 ohm 75 ohm 95 ohm 95 ohm onductor Dielectric Dia. Dia. (Stranded) 1 (Teflon) Shield Dia. Jacket Dia Max Max Max Tolerance of conductor diameters required for a reliable crimp. Smaller sizes readily accommodated consult Tyco Electronics. 2 Smaller jacketed cable can be accommodated but environmental seal may be impaired. Smooth extruded jacket should be used for consistent wire sealing. 3 Size 16 WG ontact for size 20 WG Wire Use Tool ircular onnectors 3

62 ircular onnectors ontact rrangements 1 Size Insert Layouts ( = ) Shell Size 9 MR 43 Series onnectors (ontinued) Test Data MR 43 Series onnectors meet the applicable performance requirements of specification MIL (Navy) to include the following selected test parameters listed below: DESRIPTION MIL Test Para TEST REQUIREMENTS Insulation Resistance, Insulation resistance of unmated connectors shall be 5000 megohms, minimum Room and High Temp., at room temperature and 2000 megohms, minimum, at 257 F [+125 ] Para when measured per MIL-STD-202, Method 302, Test ondition. Dielectric Withstanding Voltage, No evidence of dielectric breakdown or flashover when mated and unmated Para plugs are subjected to 1000 volts, rms, per MIL-STD-202, Method 301. Durability, Plugs and receptacles designed to withstand up to 500 cycles of engagement Para and separation without detrimental electrical or mechanical damage to the connectors. orrosion, Unmated plugs and receptacles shall show no exposure of basis metal due Para to corrosion which would affect electrical or mechanical performance of the connectors after subjection to 24 hours exposure to salt spray atmosphere per MIL-STD 202, Method 101. Sweep Vibration, Mated connectors shall show no circuit interruptions greater than 10 micro- Mated, Para seconds during 12 hours vibration to include six sweeps in two axes at -67 F [-55 ], room temperature, and 257 F [+125 ] per MIL-STD-202, Method 204, Test ondition. Post inspection shall show no detrimental cracking, breaking, or loosening of parts. Moisture Resistance, The insulation resistance of mated connectors shall exceed 100 megohms Para and after subjection to moisture resistance testing per MIL-STD-202, Method 106. ontact Retention, ontacts shall withstand 15 lbs [66.7 N] axial load without axial displacement in Para excess of [0.305] or damage to contacts or inserts when the axial load is applied to the mating end of the contacts in unmated plugs and receptacles at a rate of approximately 1 lb/sec. Insert rrangement Number of ontacts WG WG WG ontact Size 50 Ohm 22 WG 2-50 Ohm 16 WG 22 WG 2-50 Ohm 16 WG 1-50 Ohm Size Insert Layouts ( = ) Shell Size 12 Insert rrangement Number of ontacts WG WG WG ontact Size 50 Ohm 22 WG 6-50 Ohm 16 WG 95 Ohm 6-12 WG 75 Ohm 2-16 WG Size Insert Layouts ( = ) Shell Size Insert rrangement Number of ontacts WG WG 5-75 Ohm 12 ontact Size 50 Ohm 22 WG 2-75 Ohm 2-50 Ohm 4-95 Ohm 75 Ohm Notes: 1 Views shown are front face view of receptacles. Front face view of plugs is mirror image of that shown. 2 rrow ( ) indicates insert top or vertical position in relation to top or vertical position of connector housings. 3 rrangement also available in hermetic seal receptacles.

63 ircular onnectors MR 43 Series onnectors (ontinued) Part Number and Ordering Information MR 43 Series onnector part numbers indicate size, shape, insert layout, type of seal, style of contact and polarization. Note: Pin or socket (power or coaxial) contacts may be used in either plugs or receptacles. However, it is recommended that pins be placed in the receptacle when possible to take advantage of our scoop-proof design. (The style pin or socket of a coaxial contact refers to the outer contact body.) lternate Keying. Standard alternate polarizing key positions are shown below. dditional polarizing keyways are available upon request. Supplemental ccessory Hardware. We also manufacture supplemental accessory hardware (protective covers, cable clamps, etc.) to adapt these connectors to almost any application. For modifications to fit your requirements, contact Tyco Electronics. Typical Part Number 43 E H 14 P 5 (***) ircular Size Size Size Denotes Microdot Series Unsealed Hermetic H Sealed E Layout number P = Plug PF = Plug, sq. flange mtg. PT = Plug, threaded cpl. ring H = Receptacle, single hole mtg. F = Receptacle, box mtg. FT = Receptacle, box mtg. (threaded coupl.) J= Receptacle, line cord S = Receptacle, solder mount (Hermetic) = Receptacle, thru-bulkhead, double end (Hermetic) P = Pin (male) power contacts PP = Double end pins (type only) S = Socket (female) power P = oaxial pin contact, or combination of coaxial pin and pin power contacts S = oaxial socket contact, or combination of coaxial socket and socket power contacts Polarizing Position N, 1, 2, 3, 4, etc. Use one only Note: If P, S, P, or S does not appear in the numbering system, no contacts will be supplied with order (order separately). Modification Designator when pplicable (See Page 63) ircular onnectors Polarizing Key Positions ll MR 43 Series onnector multi-pin plugs and receptacles are available in alternate polarizing positions as listed below: (1) rrow ( ) indicates top or vertical position (master key-keyway) and coincides with top or vertical position of insert. This relationship remains constant with alternate polarizing key positions. N for Normal Size Part No. X Y 43****N **** **** **** **** **** Y Plug (1) X Size Part No. X Y 43****N **** **** **** **** **** **** **** **** **** **** Receptacle Y X (1) Size Part No. X Y 43****N **** **** **** **** **** **** **** **** **** **** **** **** **** ****

64 ircular onnectors MR 43 Series onnectors (ontinued) onfigurations Type P Straight Plug, Push-Pull oupling, Sealed or Unsealed (Mates with Receptacles, ll Types) [32.16] Shell Dimensions Size Type PF Straight Plug, Square Flange Mounting, Push-Pull oupling, Sealed or Unsealed (Mates with Receptacles, all Types.).175 [4.44].062 [1.57] Dia. Typ. Typ. D [32.16] [ ] Typ. Panel utout Shell Dimensions Size D Type PT Straight Plug, Threaded oupling, Sealed or Unsealed (Mates with Receptacles, Types H, HH, and FT) Max. [38.1] Lockwire Holes Master Keyway T Thread 60 Shell Dimensions Size T (lass 2) /8-32 UN /16-28 UN UN

65 ircular onnectors MR 43 Series onnectors (ontinued) onfigurations (ontinued) Type H Receptacle, Single Hole Mounting Sealed or Unsealed (Mates with Plugs, Types P, PF and PT) [ ] 1.36 [34.54] [ ].125 [3.17] Master Key Hex. Hex. D T Thread Hex. E Panel utout Shell Dimensions Size D E T (lass 2) /8-32 UN /16-28 UN UN.313 [7.95] max. panel for P & PF.109 [2.77] max. panel. for PT ircular onnectors Type 43F Receptacle, ox Mounting, Sealed or Unsealed (Mates with Plugs, Types P and PF) [ ] Hex [34.54] [ ] Master Polarizing Key Typ. D 3 Typ Dia. [ ] Typ. Panel utout Shell Dimensions Size D Note: Unless otherwise shown, tolerances are: Decimals ±.015 [±.381], fractions ±

66 ircular onnectors MR 43 Series onnectors (ontinued) onfigurations (ontinued) Type FT Receptacle, ox Mounting, Threaded oupling, Sealed or Unsealed (Mates with Plugs, Types PT, P and PF) [ ] 1.36 [34.54] [ ] Master Polarizing Key D Hex. Typ. T Thread Typ Dia. [ ] Typ. Panel utout Shell Dimensions Size T (lass 2) D /8-32 UN /16-28 UN UN Max. panel thickness is.125 [3.18]. Type J Receptacle, Line ord, Sealed or Unsealed (Mates with Plugs, Types P and PF) Shell Dimensions Size Note: Unless otherwise shown, tolerances are: Decimals ±.015 [±.381], fractions ± 1 32.

67 ircular onnectors MR 43 Series onnectors (ontinued) ccessories able lamps.156 [3.96] D.156 [3.96] Straight Shell Size Part No. [Max.] [Max.] X X X Right-ngle Shell Size Part No. [Max.] [Max.] [Max.] D [Max.] X X X ontacts (see pages 78 and 79) ontact Size Pin Part No. Socket Part No. 22 WG R Y9 16 WG R T1 12 WG R T1 50 ohm oaxial (Solder Type) T T2 50 ohm oaxial (rimp Type) ohm oaxial T T2 95 ohm oaxial T T2 ontact avity Sealing Plugs (see page 80) ontact Size Sealed onnector Part No. Unsealed onnector Part No. 22 WG WG WG ohm oaxial ohm oaxial ohm oaxial ircular onnectors Protective overs Shell Receptacle over Part No. 1 Plug over Part No. 1 Dimensions (Max.) Size With hain Without hain With hain Without hain D J P J P J P J P J P J P For threaded plug (PT) and receptacle (FT) covers, consult Tyco Electronics. Wire rope/lanyard attachments and plastic protective caps also available, consult Tyco Electronics. Receptacle over D Plug over 3 Modifications The MR 43 Series onnector modification identification system provides alteration of standard MR 43 Series onnectors to include special finishes, accessories, MR 53 Series onnector housings, and custom quality assurance provisions processing, testing, serialization, traceability. onsult your sales representative or Tyco Electronics for additional modification information. Standard modifications include: (009): MR 43 Series onnector, anodized finish black. (048): MR 43 Series onnector, iridite finish gold. (056): MR 43 Series onnector, cadmium plated clear. (057): MR 43 Series onnector including cable clamp, straight type. (078): MR 43 Series onnector insert arrangement plus MR 53 Series onnector positive lock coupling. (094): MR 43 Series onnector coaxial insert arrangement to include all-crimp coaxial contacts plus MR 53 Series onnector positive lock coupling. (098): MR 43 Series onnector connector including cable clamp, right-angle type. 63

68 ircular onnectors MR 53 Series onnectors General Information The MR 53 Series onnector family represents a major advancement in the design of high density (.080 [2.03] contact centers), subminiature, power and coaxial contact connectors. The MR 53 Series onnectors consists of two connector styles the Military approved MD53 featuring shoulder entrapped contacts, and the new RMD53 utilizing rear insertable/ removable contacts. MR 53 Series onnectors combine positive lock the rugged, push-pull, lockcoupling mechanism with the unique positive seal multiple sealing system. Positive lock is our new finger-tip, push-pull coupling with the safety lock feature, and is the only connector made with positive blind mating indication. When the plug is fully engaged, the coupling ring can be rotated 45 to the safety lock position; if the plug is not completely engaged, the coupling ring cannot be turned to the safety lock position. onsequently, under blindmating conditions, it is always possible to determine if the plug is properly engaged without visual reference, damage, or accidental disengagement. The environmental integrity is guaranteed by multiple seal construction using silicone rubber 0 rings and a floating, voidless insert construction. The floating insert design allows the inserts to move within the connector housing to control interfacial sealing pressure in spite of tolerance accumulation, and a compression interfacial seal with minimum engaging force. oth the primary 0 ring system and the continuous dielectric construction withstand the MIL altitude breathing test. The sealing system meets the air leakage requirements of not more than 1 cubic inch of air per hour at a 30 P.S.l. pressure differential. This redundant sealing method is indicative of the inherent reliability built into our connectors. MR 53 Series onnector power contacts are manufactured from high grade copper alloys, and are designed to be crimped with standard M22520 tooling using subminiature contact locators. MR 53 Series onnectors incorporate hard insulators in both the plug and receptacle inserts for exceptional contact stability. Shoulder entrapment positively retains the front insertable MD53 contacts between the front and rear insulators. The new RMD53 contacts are rear insertable and removable and are retained within the connector insulators by clips which can be visually inspected. No insertion or extraction tools are required for either the MD53 or RMD53 contacts using nominal size wire. MR 53 Series onnectors are truly field serviceable no special tools are required for maintainability. In addition, connector subcomponents damaged through handling or misuse can be procured separately generally without the need to scrap entire connector units. Weight reductions as high as 67% are achieved without loss of performance. MR 53 Series onnectors are available in both environmental and hermetic styles. In addition to the positive lock plug, a threaded coupling plug is also available. Part numbers for configurations offering various finishes and accessories plus other design variations to satisfy special requirements are also available. MD53 shoulder entrapped contacts RMD53 rear insertable contacts 64 Materials and Finishes Housings and quick disconnect couplings are machined from bar stock aluminum to combine maximum strength with minimum weight. Threaded couplings are machined from non-magnetic, stainless steel bar stock for durability of the coupling threads. ontacts are manufactured from high conductivity copper alloys which have been selected for low contact resistance over the operating range of the connectors. Inserts are molded from flame-resistant, glass-filled diallyl phthalate, meeting STM D5948 requirements. ll resilient parts are made of hightemperature, silicone elastomers. Fuel resistant compounds are used where swelling affects the performance of the connector. ll materials are selected for their nonmagnetic properties. The standard finish is hard black, non-conductive, anodized finish on connector housings and quick disconnect couplings; stainless steel threaded coupling is passivated with black oxide finish. onductive finish modifications include gold finish and electroless nickel finish. Multi-finish modifications for connector plugs include black anodized disconnect coupling with conductive finish on shell grounding members. ontacts are gold plated per MIL-G requirements. See Page 73 for modification information.

69 ircular onnectors MR 53 Series onnectors (ontinued) Service and Performance Data I. Electrical Electrical Ratings urrent Rating Dielectric Working Voltage ontact ontact Size (mperes, Withstanding Sea 110,000 1 Resistance Max., 81 F [+27 ]) Voltage (RMS) Level Ft. lt. (Millivolts, Max.) 22 WG WG ,000 ft equals 33,528 m altitude. Wire Sizes ccommodated ontact ond. Dia. Jacket Size (Stranded) 1 Size 2 22 WG [ ] [ ] 16 WG [ ] [ ] 1 Tolerance of conductor diameters required for a reliable crimp. Smaller sizes readily accommodated consult Tyco Electronics. 2 Smaller jacketed cable can be accommodated but environmental seal may be impaired. Smooth extruded jacket should be used for consistent wire sealing. Insulation Resistance: 5000 megohms, minimum, at room ambient conditions. II. Mechanical Durability: 500 ycles Mate/Unmate. oupling/uncoupling Forces and Tightening Torques: Shell oupling/ Uncoupling Tightening Torque (In-Lbs.) Size Force (In-Lbs.) Max. Retaining Nut Mounting Nut 9 18 [80.07 N] 20 [2.26 Nm], Max [ Nm] [97.86 N] 20 [2.26 Nm], Max [ Nm] [ N] 20 [2.26 Nm], Max [ Nm] [ N] 20 [2.26 Nm], Max [ Nm] Operating Temperature: -67 F to 257 F [-55 to +125 ] onnector Mated Length: MD Plug (06) mated to MD Receptacles (00) (01) (02) (12): [51.58], max. RMD Plug (06) mated to RMD Receptacles: [56.31], max. ircular onnectors 3 65

70 ircular onnectors Test Data MR 53 Series onnectors (ontinued) MR 53 Series onnectors exceed the requirements of specification MIL (USF) as detailed in the applicable M38300 (USF) military specification sheets. MR 53 Series onnectors meet the following selected test parameters as specified below: DESRIPTION MIL Test Para TEST REQUIREMENTS ontact Retention MD ontacts shall withstand 15 lbs [66.72 N] axial load and RMD contacts Para lbs [44.48 N] axial load without axial displacement in excess of [.305] or damage to contacts or inserts when the axial load is applied to the mating end of the contacts in unmated plugs and receptacles at a rate of approximately 1 lb/sec. [4.45 N]. ontact Resistance The potential drop across normally mated contacts shall not exceed 25 mv Para under room ambient and high temperature service conditions when measured as specified in MIL , Fig. 2, with maximum rated current. Dielectric Withstanding Voltage, No evidence of dielectric breakdown or flashover when mated and unmated ltitude and Sea Level plugs are subjected to 645 and 180 volts RMS, respectively, at altitudes up to Para ,000 feet [33,528 m] and 1000 volts RMS at sea level. Insulation Resistance, Insulation resistance of mated plugs and receptacles shall be 5000 megohms, Room and High Temp. minimum, at room temperature and 1000 megohms, minimum, at 257 F Para and [+125 ] when measured per MIL-STD-202, Method 302, Test ondition. oupling and Uncoupling Plugs and receptacles shall withstand up to 500 cycles of engagement and Para separation (locking mechanism actuated with each cycle) without detrimental damage to plugs or receptacles or not satisfying subsequent tests of MIL Fluid Immersion Mating and unmating forces shall not exceed 27 Ibs, [ N] maximum, Para (15 shell size) after fully wired plugs and receptacles are immersed for 20 hours, each, in hydraulic fluid (MIL-H-5606) and high temperature lubricating oil (MIL-L-9236) followed by a one-hour dry. Sweep Vibration, Mated Mated connectors shall show no circuit interruptions greater than one microsec- Para ond during 12 hours vibration to include six sweeps in each axis at extreme temperatures of -85 F [-65 ] and 257 F [+125 ] per MIL-STD-202, Method 204, Test ondition D. Post inspection shall show no detrimental cracking, breaking, or loosening of parts. Moisture Resistance The insulation resistance of mated connectors shall exceed 1000 megohms Para after subjection to moisture resistance testing per MIL-STD-202, Method 106, as amended by MIL ltitude reathing The insulation resistance of wired and mated connectors shall be 5000 Para megohms, minimum, and there shall be no flashover or breakdown at a test voltage of 1000 volts RMS after the third cycle and while immersed in 5% salt water solution at 68 F [20 ] and room ambient pressure pressure at 68 F [20 ]. Salt Spray Unmated plugs and receptacles shall show no excessive corrosion which Para would detrimentally affect the electrical and mechanical performance of the connectors after subjection to 24 hours exposure to salt spray atmosphere per MlL-STD-202, Method

71 ircular onnectors MR 53 Series onnectors (ontinued) ontact rrangements 1,2 Shell Size 9 Shell Size 12 Shell Size 15 Shell Size 18 6 Insert rrangement , , ,5 Number of ontacts ontact Size 22 WG 22 WG 16 WG 22 WG Shell Size 15 Shell Size 15 Shell Size 15 Shell Size 9 Insert rrangement , Number of ontacts ohm ontact Size 16 WG 22 WG WG WG Part Number and Ordering Information MR 53 Series onnector part numbers indicate size, shape, insert layout, type of seal, style of contact and polarization. 1 Views shown are front face view of receptacles. Front face view of plugs is mirror image of that shown. 2 In addition to those inserts shown, MR 43 Series onnector inserts may be utilized in MR 53 Series onnector housings. See page 63, MR 43 Series onnector modifications. 3 rrow ( ) indicates insert top or vertical position in relation to top or vertical position of connector housings. 4 rrangement also available in RMD style. 5 rrangement also available in hermetic seal receptacles. 6 rrangement available in 06, 00, 01. Note: Pin or socket (power or coaxial) contacts may be used in either plugs or receptacles. However, it is recommended that pins be placed in the receptacles when possible to take advantage of our scoopproof design. lternate Keying Standard alternate polarizing key positions are shown below. dditional polarizing keyways are available upon request. Supplemental ccessory Hardware We also manufacture supplemental accessory hardware (protective covers, shield adapters, etc.) to adapt these connectors to almost any application. For modifications to fit your requirements, contact Tyco Electronics. ircular onnectors 3 Typical Part Number MD53 06 E S N (***) Series MD53 or RMD53 style Single hole mntng. 00 receptacle Line cord recept. 01 ox mntng. recpt. 02 Straight plug, 06 positive lock quick disconnect ox mntng. recept., thd 12 Straight plug, 16 threaded coupling Modification Designator when applicable (See page 73) Polarizing position N, 1, 2, 3, 4, etc. P Pin, Power Pin, oaxial Pin S Socket, Power Socket, oaxial Socket NOTE: If P or S does not appear in the numbering system, no contacts will be supplied with order (order separately) Insert arrangement number Shell Size O.D. of receptacle barrel to nearest.063 [1.60] E Environmentally sealed H Hermetic seal (receptacle only). 67

72 Y X ircular onnectors MR 53 Series onnectors (ontinued) Polarizing Key Positions (1) (1) ll of our multi-pin plugs and receptacles are available in alternate polarizing positions as listed below: Y X Plug (Shell sizes 9, 12, 15 only) Receptacle (Shell sizes 9, 12, 15 only) Shell Size 9 Part No. X Y (R) MD53-***9-***-N (R) MD53-***9-*** (R) MD53-***9-*** (R) MD53-***9-*** (R) MD53-***9-*** (R) MD53-***9-*** Shell Size 12 Part No. X Y (R) MD53-***12-***-N (R) MD53-***12-*** (R) MD53-***12-*** (R) MD53-***12-*** (R) MD53-***12-*** (R) MD53-***12-*** (R) MD53-***12-*** (R) MD53-***12-*** (R) MD53-***12-*** (R) MD53-***12-*** (R) MD53-***12-*** Shell Size 15 Part No. X Y (R) MD53-***15-***-N (R) MD53-***15-*** (R) MD53-***15-*** (R) MD53-***15-*** (R) MD53-***15-*** (R) MD53-***15-*** (R) MD53-***15-*** (R) MD53-***15-*** (R) MD53-***15-*** (R) MD53-***15-*** (R) MD53-***15-*** (R) MD53-***15-*** (R) MD53-***15-*** (R) MD53-***15-*** (R) MD53-***15-*** (1) (1) E E D D Plug (Shell size 18 only) Receptacle (Shell size 18 only) Shell Size 18 Part No. D E (R) MD53-***18-***-N (R) MD53-***18-*** (R) MD53-***18-*** (R) MD53-***18-*** (R) MD53-***18-*** (R) MD53-***18-*** (R) MD53-***18-*** (R) MD53-***18-*** (R) MD53-***18-*** (R) MD53-***18-*** (R) MD53-***18-*** (1) rrow ( ) indicates top or vertical position (master key/keyway) and coincides with top or vertical position of insert shown on page 59. This relationship remains constant with alternate polarizing key positions. (R) Rear insertable and removable.

73 ircular onnectors MR 53 Series onnectors (ontinued) onfigurations Master Keyway MD53-06E/RMD53-06E Straight Plug, positive lock oupling, Environmental (Mates with Receptacles, ll Types).093 Max., [2.36] RMD only Shell Dimensions Size (Max.) (Max.) MD53-16E/RMD53-16E Straight Plug, Threaded oupling, Environmental (Mates with Receptacles, Types 00 and 12; Not available in 18 Shell Size).093 Max., [2.36] RMD only Lockwire Holes Master Keyway T Thread ircular onnectors 3 Shell Dimensions Size (Max.) (Max.) T (lass 2) /8-32UN /16-28UN UN UN 69

74 ircular onnectors MR 53 Series onnectors (ontinued) onfigurations (ontinued) MD53-00E/RMD53-00E Receptacle, Single Hole Mounting, Environmental (Mates with Plugs, Type 06 and 16) [ ] G [ ] F Hex..125 [3.18] Master Key Hex. E D Panel utout T Thread.093 Max., [2.36] RMD Only Hex. Shell Dimensions Size D E F G T (lass 2) /8-32NS /16-28NS UNS /4-28UN Note:.313 [7.95] Maximum Panel Thickness when mated with a positive lock 06 Plug..109 [2.77] Maximum Panel Thickness when mated with threaded 16 Plug. MD53-01E/RMD53-01E Receptacle, Line ord, Environmental (Mates with Plug, Type 06) Hex. Master Key.093 Max., [2.36] RMD only Shell Dimensions Size (Max.) (Max.) Note: Unless otherwise shown, tolerances are: decimals ±.015 [±.381]; fractions ± 1 32.

75 ircular onnectors MR 53 Series onnectors (ontinued) onfigurations (ontinued) MD53-02E/RMD53-02E Receptacle, ox Mounting, Environmental (Mates with Plug, Type 06) [ ] Hex [34.54] [ ] Master Polarizing Key Typ. D.093 Max. RMD only [2.36] Typ Dia. [ ] Typ. Panel utout.375 [9.53] Max. Panel Thickness for rear-mount applications. Shell Dimensions Size D MD53-12E/RMD53-12E Threaded oupling Receptacle, ox Mounting, Environmental (Mates with Plugs, Type 06 and 16; not available in 18 Shell Size) [ ] Hex [34.54] [ ] T Thread.093 Max. RMD only [2.36] Typ. Master Polarizing Key Typ Dia. [ ] Typ. Panel utout.125 [3.18] Max. Panel Thickness when mated with threaded 16 Plug for rear mount applications. D ircular onnectors 3 Shell Dimensions Size T (lass 2) D /8-32UN /16-28UN UN Note: Unless otherwise shown, tolerances are: decimals ±.015 [±.381]; fractions ±

76 ircular onnectors MR 53 Series onnectors (ontinued) ccessories Test dapter The test adapter accessory is utilized primarily as a connector simulator to preserve the end-use connector where this connector would be subjected to extensive testing, matings, or probings. The test adapter, when mated, provides the exact mating interface as that of the end-use connector and is completely field serviceable. Test dapter Product Part Number System How to Specify T 53 E SP N (XXX) Modification Designator Shell Size Layout Polarizing Position ontact Sex SP Sockets Plug end, Pins Receptacle end PS Pins Plug end, Sockets Receptacle end dapter Type E Sealed Unsealed Series or Style 53 MR 53 Series onnector 63 MR 63 Series onnector Test dapter Shell Dimension Size (Max.) (Max.) Dia. Receptacle over D Plug over 72 Protective overs Shell Receptacle over Part No. 1 Plug over Part No. 1 Dimensions (Max.) Size With hain Without hain With hain Without hain D L W L P L W L P L W L P L W L P For threaded plug (PT) cover, consult Tyco Electronics. Wire rope/lanyard attachments and plastic protective caps also available, consult Tyco Electronics.

77 ircular onnectors MR 53 Series onnectors (ontinued) ccessories (ontinued) able lamps Shell lamp Part No. T Size MD RMD Thd F F /2-20 UNF T.156 [3.96] F F /16-24 UNEF F F F F /16-24 UNEF UN Straight Shell lamp Part No. T Size (Max.) (Max.) D MD RMD Thd F F /2-20 UNF.156 [3.96] F F /16-24 UNEF D F F F F /16-20 UNEF UN T Right-ngle ontacts (see pages 78 and 79) ontact Pin Part No. Socket Part No. Size MD RMD MD RMD 22 WG R R Y Y9 16 WG R T1 Note: Standard packaging includes same quantity of contacts as contact cavities in insert. ircular onnectors ontact avity Sealing Plugs (see page 80) ontact Standard Length Part No. Short Length Part No. Size MD RMD MD RMD 22 WG WG Note: Standard length plug occupies contact cavity and wire sealing grommet. Short length plug occupies wire sealing grommet only (to be used behind non-wired contacts and in plugs which mate to hermetic receptacles). 3 Modifications We offer a unique modification identification system which provides alteration of standard MR 53 Series onnectors to include special finishes, accessories, MR 43 Series onnector contact arrangements, and custom quality assurance provisions processing, testing, serialization, traceability. onsult Tyco Electronics for additional modification information. Standard modifications include: (503): MR 53 Series onnector including cable clamp, straight type (504): MR 53 Series onnector including cable clamp, rightangle type (506): MR 53 Series onnector, gold finish (507): MR 53 Series onnector, electroless nickel finish (508): MR 53 Series onnector, black anodized coupling ring, gold over electroless nickel housings, retaining nuts and hardware. 73

78 ircular onnectors MR 63 Series onnectors MR 63 Series onnectors RMD63 Performance Data MR 63 Series onnectors,0 RMD63 Series meet or exceed the performance requirements of specification MIL (USF) as detailed in the M38300 (USF) military specification sheets covering the MR 53 Series onnectors. Tyco Electronics can supply detailed, cross reference information. MR 63 Series onnectors, RMD63 Series meet the following selected test parameters as specified below: DESRIPTION TEST REQUIREMENTS ontact Retention ontacts are to withstand 15 lbs. [66.72 N] axial load and RMD contacts 10 lbs. [44.48 N] axial load without axial displacement in excess of [.305] or damage to contacts or inserts when the axial load is applied to the mating end of the contacts in unmated plugs and receptacles at a rate of approximately 1 lb/sec. [4.45 N]. ontact Resistance The potential drop across normally mated contacts shall not exceed 25 mv under room ambient and high temperature service conditions when measured as specified in MIL , Fig. 2, with maximum rated current. Dielectric Withstanding Voltage, No evidence of dielectric breakdown or flashover when mated and unmated ltitude and Sea Level plugs are subjected to 645 and 180 volts RMS, respectively, at altitudes up to 110,000 [33,528 m] feet and 1000 volts RMS at sea level. Insulation Resistance, Insulation resistance of mated plugs and receptacles shall be 5000 megohms, Room and High Temp. minimum, at room temperature and 1000 megohms, minimum, at 257 F [+125 ] when measured per MIL-STD-202, Method 302, Test ondition. oupling and Uncoupling Plugs and receptacles shall withstand up to 500 cycles of engagement and separation without detrimental damage to plugs or receptacles or not satisfying subsequent tests of MIL Fluid Immersion Mating and unmating forces shall not exceed 27 lbs. [ N], maximum, (15 shell size) after fully wired plugs and receptacles are immersed for 20 hours, each, in hydraulic fluid (MIL-H-5606) and high temperature lubricating oil (MIL-L-9236) followed by a one-hour dry. Sweep Vibration, Mated Mated connectors shall show no circuit interruptions greater than one microsecond during 12 hours vibration to include six sweeps in each axis at extreme temperatures of -85 F [-65 ] and 257 F [+125 ] per MIL-STD-202, Method 204, Test ondition D. Post inspection shall show no detrimental cracking, breaking, or loosening of parts. Moisture Resistance The insulation resistance of mated connectors shall exceed 1000 megohms after subjection to moisture resistance testing per MIL-STD-202, Method 106, as amended by MIL ltitude reathing The insulation resistance of wired and mated connectors shall be 5000 megohms, minimum, and there shall be no flashover or breakdown at test voltage of 1000 volts RMS after the third cycle and while immersed in 5% salt water solution at 68 F [20 ] and room ambient pressure at 68 F [20 ]. Salt Spray Unmated plugs and receptacles shall show no excessive corrosion which would detrimentally affect the electrical and mechanical performance of the connectors after subjection to 24 hours exposure to salt spray atmosphere per MIL-STD-202, Method

79 ircular onnectors MR 63 Series onnectors (ontinued) Part Number and Ordering Information onnector part numbers indicate size, shape, insert layout, type of seal, style of contact and polarization. Note: Pin or socket (power or coaxial) contacts may be used in either plugs or receptacles. However, it is recommended that pins be placed in the receptacle when possible to take advantage of our scoop-proof design. Typical Part Number MD63 06 E S N (***) Series MD63 or RMD63 style Single hole mntng. 00 receptacle Line cord recept. 01 ox mntng. recpt. 02 Straight plug, bayonet 06 quick disconnect Modification Designator when applicable (See page 77) Polarizing position (1) N, 1, 2, 3, 4, etc.... P Pin power contact S Socket power contact Insert arrangement number (2) Shell Size O.D. of receptacle barrel to nearest 1/16 inch E Environmentally sealed H Hermetic seal (receptacle only). (1) For polarizing key positions see MR 53 Series onnectors. (2) For contact arrangements see MR 53 Series onnectors. Note: If P or S does not appear in the numbering system, no contacts will be supplied with order (order separately). ircular onnectors onfigurations MD63-06E/RMD63-06E Master Polarizing Keyway Straight Plug, ayonet oupling, Environmental and Non-Environmental (Mates with Receptacles 02, 00 and 01) [2.36] Max. Shell Dimensions Size (Max.) (Max.)

80 ircular onnectors MR 63 Series onnectors (ontinued) onfigurations (ontinued) MD63-02E/RMD63-02E Receptacle, ox Mounting, Environmental and Non- Environmental (Mates with Plug, Type 06) Master Polarizing Key Dia. [ ] 4 Holes Typ. Hex. Typ..093 Max. [2.36] [ ] [34.54] [ ] D Panel utout.375 [9.53] Max. Panel Thickness for rear mount applications. Shell Dimensions Size D MD63-00E/RMD63-00E Receptacle, Single Hole Mounting, Environmental and Non-Environmental (Mates with Plug, Type 06) Hex. Master Polarizing Key Hex..125 [3.18] F Hex. D T Thread.093 E Max. [2.36] Panel utout Shell Dimensions Size D E F T (lass 2) /16-32UN /8-28UN UN /4-28UN MD63-01E/RMD63-01E Master Polarizing Key Receptacle, Line ord, Environmental (Mates with Plug, Type 06).093 [2.36] Max. Hex. Shell Dimensions Size (Max.)

81 ircular onnectors MR 63 Series onnectors (ontinued) ccessories able lamps T Thread [3.96] [5.72] Max. Shell Size Part No. T Thread N /2-20UNF N /16-24UNEF N /16-20UNEF N UN-2 Straight.225 [5.72] Max..156 [3.96] D T Thread ngle Shell Size Part No. (Max.) (Max.) D T Thread N /2-20UNF N /16-24UNEF N /16-20UNEF N UN-2 ircular onnectors Protective overs Shell Receptacle Part No. Plug Part No. Dimensions Size Without hain With hain Without hain With hain D P L F L P L F L P L F L P L F L Plastic Protective overs also available; consult Tyco Electronics. D 3 Modifications We offer a unique modification system which provides alteration of standard MR 63 Series onnectors to include special finishes, accessories, and custom quality assurance provisions processing, testing, serialization, traceability. onsult your sales representative or Tyco Electronics for additional modification information. Standard modifications include: (801): MR 63 Series onnector, electroless nickel finish (803): MR 63 Series onnector including cable clamp, straight type (804): MR 63 Series onnector including cable clamp, rightangle type 77

82 ircular onnectors ontacts for MR 43, MR 53 and MR 63 onnectors MR 43, MD53, MD63 Series.452 [11.48].702 [17.83] [ ] Dia Wire Inspection Hole [ ] Dia. Part Number R4 ( ) 22 WG Pin MR RMD53, RMD63 Series.515 [13.08].767 [19.48] [ ] [ ] Dia [ ] Dia. Wire Inspection Hole Part Number R4 ( ) 22 WG Pin [ ] Dia Wire Inspection Hole [ ] Dia. Part Number Y9 ( ) 22 WG Socket MR 43, MD53, MD63 Series.452 [11.48].702 [17.83] [ ] [ ] Dia. Wire Inspection Hole [ ] Dia [ ] Dia. Wire Inspection Hole Part Number R4 ( ) 16 WG Pin Part Number T1 ( ) 16 WG Socket MR 43 Series.452 [11.48].702 [17.83] [ ] Dia [ ] [ ] Dia Wire Inspection Hole [ ] Dia. [ ] Dia. Part Number R4 12 WG Pin [ ] Dia. Wire Inspection Hole Part Number T1 ( ) 12 WG Socket MR MD53, MD63 Series.452 [11.48].702 [17.83] [ ] Dia Wire Inspection Hole [ ] Dia [ ] Dia. Part Number R4 ( ) WG Pin

83 ircular onnectors ontacts for MR 43, MR 53 and MR 63 onnectors (ontinued) MR 43, MD53, MD63 Series [ ] [ ] Dia. Wire Inspection Hole [ ] Dia. Part Number Y9 ( ) 22 WG Socket MR MD53, MD63 Series [ ] Wire Inspection Hole [ ] Dia. [ ] Dia. Part Number Y WG Socket oaxial ontacts MR 43, MD53, MD63 Series Solder Type oaxial ontacts ircular onnectors P Type S Type ontact Part No. Type Dia. 50 Ω T2 ( ) S T2 ( ) P Ω T2 ( ) S T2 ( ) P Ω T2 ( ) S T2 P MR 43 Series LEPR/ON rimp Type, 50 Ohm oaxial ontacts.425 [10.80].600 [15.24].120 [3.05] rimp pprox. Part Number S Socket [ ] rimp Length Part Number P Pin 79

84 ircular onnectors ontact avity Sealing Plugs Size Part No. pplication Description [11.35] Unsealed 43 Series [ ] Dia. [ ] Dia. Sealed 43 Series 22 WG MD53, RMD53 MD63, RMD [10.70] [ ] Dia RMD53, RMD [23.88] [ ] Dia Sealed 43 Series MD53, MD [ ] Dia..940 [23.88] 16 WG Sealed 43 Series MD53, MD [10.70] [ ] Dia Unsealed 43 Series.452 [11.48] [ ] Dia Sealed 43 Series [ ] Dia..940 [23.88] [ ] Dia. 12 WG Unsealed 43 Series Dia. [ ].447 [11.35] Dia. [ ] 22/20 WG MD53, MD Dia. [ ].940 [23.88] Dia. [ ] [ ] Dia. Size Part No. pplication Dia. Dia. Description Dia. [9.86] Unsealed 43 Series Sealed 43 Series Dia..913 [23.19] 80

85 ircular onnectors ssembly Tools MR 43, 53 and 63 Series onnectors Removal Tool None required. rimp Tools Turret style tool (M22520/1-01 and TH88) MIRODOT Part Number rimps all power contacts. Locator Style Tool MIRODOT Part Number with locators. ontact Size Wire Size Locator 22 22, , For MR 43 Series onnector rimp oax ontacts Use & MR 73 Series onnectors Description Part No. rimp Tool w/ Locator rimp Tool Only M22520/2-01 Locator Only Description Part No. rimp Tool w/ Locator rimp Tool Only Locator Only ircular onnectors 3 81

86 ircular onnectors Service and Performance Data MR 73 Series onnectors MR 73 Series onnectors meet or exceed the performance requirements of specification MIL Your sales representative or field engineer can supply detailed, cross-reference information. MR 73 Series onnectors meet the following selected test parameters as specified below: DESRIPTION TEST REQUIREMENTS ontact Retention ontacts are to withstand 10 lbs [44.48 N] axial load without axial displacement in excess of [0.30] or damage to contacts or inserts when the axial load is applied to the mating end of the contacts in unmated plugs and receptacles at a rate of approximately 1 lb/sec. [4.45 N]. ontact Resistance The potential drop across normally mated contacts shall not exceed 25 mv under room ambient and high temperature service conditions when measured as specified in MIL with maximum rated current. Dielectric Withstanding No evidence of dielectric breakdown or flashover when mated and unmated Voltage, ltitude and Sea Level plugs are subjected to 645 and 180 volts RMS, respectively, at altitudes up to 70,000 feet [21,336 m] and 1000 volts RMS at sea level. Insulation Resistance, Insulation resistance of mated plugs and receptacles shall be 5000 megohms, Room and High Temp. minimum, at room temperature and 1000 megohms, minimum, at 257 F [+125 ] when measured per MIL-STD 202, Method 302, Test ondition. oupling and Uncoupling Plugs and receptacles shall withstand up to 500 cycles of engagement and separation without detrimental damage to plugs or receptacles or not satisfying subsequent tests. Fluid Immersion Mating and unmating forces shall not exceed 27 Ibs [ N] maximum, (15 shell size) after fully wired plugs and receptacles are immersed for 20 hours, each, in hydraulic fluid (MIL-H-5606) and high temperature lubricating oil (MIL-L-9236) followed by a one-hour dry. Sweep Vibration, Mated Mated connectors shall show no circuit interruptions greater than one microsecond during 12 hours vibration to include six sweeps in each axis at extreme temperatures of -85 F [-65 ] and 257 F [+125 ] per MIL-STD-202, Method 204, Test ondition D. Post inspection shall show no detrimental cracking, breaking, or loosening of parts. Moisture Resistance The insulation resistance of mated connectors shall exceed 1000 megohms after subjection to moisture resistance testing per MIL-STD-202, Method 106. ltitude reathing The insulation resistance of wired and mated connectors shall be 5000 megohms, minimum, and there shall be no flashover or breakdown at test voltage of 1000 volts RMS after the third cycle and while immersed in 5% salt water solution at 68 F [20 ] and room ambient pressure at 68 F [20 ]. Salt Spray Unmated plugs and receptacles shall show no excessive corrosion which would detrimentally affect the electrical and mechanical performance of the connectors after subjection to 24 hours exposure to salt spray atmosphere per MIL-STD-202, Method

87 ircular onnectors Service and Performance Data I. Electrical Electrical Ratings MR 73 Series onnectors (ontinued) ontact urrent Rating Dielectric Working Voltage ontact Size (mperes, Withstanding Resistance Max., 81 F [+27 ]) Voltage (RMS) Sea Level 110,000 Ft. lt. 1 (Millivolts, Max.) 22 WG ,000 ft = 33,528 m Wire Range ccommodations Wire Wire O.D. of Finished Wire arrel Size Size (WG) Range Nominal Wire Spec. MIL-W Min Nom. Type E or ET 22 WG Nom. Type ET Max Nom. Type ET II. Mechanical Durability: 500 ycles Mate/Unmate. oupling/uncoupling Forces and Tightening Torques: Shell oupling/ Uncoupling Tightening Torque (In-Lbs.) Size Force (In-Lbs.) Max. Retaining Nut Mounting Nut 9 10 [44.48] 20 [2.26 N] Max [3.39 Nm 5.08 Nm] [66.72] 20 [2.26 N] Max [4.52 Nm 6.21 Nm] [97.86] 20 [2.26 N] Max [6.21 Nm 7.91 Nm] [124.55] 20 [2.26 N] Max [7.91 Nm 9.60 Nm] Operating Temperature: -67 F to 257 F [-55 to +125 ]. onnector Mated Length: [56.31] Max. Part Number and Ordering Information MR 73 Series onnector part numbers indicate size, shape, insert layout, type of seal, style of contact and polarization. MD73 06 E P N (***) Series MD73 Single hole mntng. 00 receptacle Line cord receptacle 01 ox mntng. receptacle 02 Straight plug, bayonet 06 quick disconnect Modification Designator when applicable Polarizing position N, 1, 2, 3, 4, etc.... P Pin power contact S Socket power contact Insert arrangement number Shell Size O.D. of receptacle barrel to nearest.062 [19.05] inch E Environmentally sealed Notes: Pin contacts in plug; socket contacts in receptacle. If P or S does not appear in the numbering system, no contacts will be supplied with order (order separately). ircular onnectors 3 ontact rrangements 1 Shell Size 9 Shell Size 12 Shell Size 15 Insert rrangement Number of ontacts ontact Size 22 WG 22 WG 22 WG 1 Views shown are front face views of receptacles. Front face view of plug is mirror image of that shown. 2 rrow ( ) indicates insert top or vertical position in relation to top or vertical position of housing. 3 The 22 WG contact arrangements will accommodate MIL-W Type ET, 22, 24, 26 WG wire. ontact spacing is on [1.65] centers. 83

88 ircular onnectors onfigurations MD73-06E Straight Plug, ayonet oupling, Environmental and Non-Environmental (Mates with Receptacles 02, 00 and 01) MR 73 Series onnectors (ontinued) Master Polarizing Keyway.093 [2.36] Max. Shell Dimensions Size (Max.) (Max.) MD73-02E Receptacle, ox Mounting, Environmental and Non- Environmental (Mates with Plug, Type 06) Master Polarizing Key Dia. [ ] 4 Holes Typ. Hex. Typ..093 Max [2.36] D [ ] [ ] Panel utout [34.54].375 [9.53] Max. Panel Thickness Shell Dimensions Size D MD73-00E Receptacle, Single Hole Mounting, Environmental and Non-Environmental (Mates with Plug, Type 06) Hex. Master Polarizing Key Hex..125 [3.18] F Hex. D Max. [2.36] T Thread Shell Dimensions Size D E F T (lass 2) /16-32UN /8-28UN UN /4-28UN E Panel utout

89 ircular onnectors MR 73 Series onnectors (ontinued) onfigurations (ontinued) MD73-01E Receptacle, Line ord, Environmental (Mates with Plug, Type 06) Master Polarizing Key Hex..093 Max. [2.36] Shell Dimensions Size (Max.) ccessories able lamps T Thread.225 Max. [5.72].156 [3.96] Shell Size lamp Part No. T Thd N /2-20 UNF N /16-24 UNEF N /16-20 UNEF N UN.225 Max. [5.72].156 [3.96] ircular onnectors 3 D T Thread Shell Size lamp Part No. (Max.) (Max.) D T Thd N /2-20 UNF N /16-24 UNEF N /16-20 UNEF N UN 85

90 ircular onnectors MR 73 Series onnectors (ontinued) ccessories (ontinued) ontacts Twist pin 22 Pins and Sockets opper alloy plated [ ] gold over copper flash per MIL-G-45204, Type II Rating 5 amps ontact Resistance.008 ohms max..250 [6.35].415 [10.54].042 [1.07] Dia..680 [17.27].250 [6.35].030 Dia. [0.76].034 Dia. [0.86].050 [1.27] Dia..035 Dia. [0.89] [ ] Dia..050 [1.27] Dia. Part Number Part Number Engineering/Separation Forces 6 oz. [1.67 N] max. /.502 [.139 N] min. Durability 2000 cycles ontact avity Sealing Plugs.800 [20.32].437 [11.10].264 [6.71] [ ].264 [6.70] [ ] Part Number Part Number ontact Size Sealing Plug Filler Plug 22 WG Note: Sealing plug occupies insert and grommet cavities. Filler plug occupies insert cavity only. 86

91 ircular onnectors MQR Series Microminiature ircular onnectors MQR stands for MIRODOT Quick Release. This line of circular quick disconnect connectors has metal shells with push-pull couplings which provide a positive connection for rugged environmental use. The MQR series is specified for cable-to-cable and cableto-panel applications. The plug connector side contains socket contacts. The receptacle connector side contains pin contacts. ecause the pin contact is active or live, the pins require the physical protection that the receptacle side offers. (Similar to a protected or shrouded header.) While there is no optional hardware for the MQR series, the receptacles incorporate a standard jam nut to tighten the connector down to the board or panel. MQR connectors are manufactured to the performance specifications of MIL-DTL How to Specify/ Ordering ode S Solder pot X Special, Does not fit description. onnector Series Shell, Material & Finish luminum, Electroless Nickel Finish rass, Sulfamate Nickel Finish Number of ontacts** 7, 19, 37* Shell P Plug (Socket ontact) F Receptacle, Front Panel Mount (Pin ontact) R Receptacle, Rear Panel Mount (Pin ontact) *uses twist pin contacts ** Other non-standard sizes are also available, contact Tyco Electronics for details. MQR 37 P Length in Inches (Min.) Insulation olor or Finish 1 ll white 6 are (unfinished) 2 ll yellow 7 olor coded per MIL-STD-681, System I 3 ll gray 9 10 Solid color repeating (starts with black) 4 Gold plated 5 Tin dipped gold plated Wire Type Type E, 7 strand Type ET, 7 strand Per MIL-W { Type E, 19 strand D Type ET, 19 strand F 7 strand per MIL-W-22759/11 (28 WG only) G 19 strand per MIL /11 26 WG, 24 WG L opper, solid Q Stranded per MIL-W-22759/33 Wire Size 4 24 WG 5 25 WG 6 26 WG 8 28 WG 0 30 WG ircular onnectors 3 Front Panel Mount (MQR Receptacle) Key Size Dimensions (Hex) (Min.) Ø (Min.) D Thd /8-32 UNEF /2-28 UNEF /4-20 UNEF-2 Hex. D Thd..400 [10.16] Min. Ø Min. Mounting Hole For Front Panel Mount Front Panel Mount (19 Position Shown) 87

92 ircular onnectors MQR Series Microminiature ircular onnectors (ontinued) Rear Panel Mount (MQR Receptacle) Size Dimensions (Hex) (Min.) Ø (Min.) D Thd /16-28 UNEF /16-24 UNEF /4-20 UNEF [0.64] Typ..050 [1.27] Typ. Key.0433 [1.10] Typ. Hex..036 ±.005 [0.91± 0.13] Typ. D Thd..250 [6.35] Min. L Min. Rear Panel Mount (19 Position Shown) Ø Min. Mounting Hole For Rear Panel Mount ircular MQR Series Quick Release Receptacle 7 Position (Stamped Pin) 19 Position (Stamped Pin) 37 Position (Twist Pin) ircular MQR Series Quick Release Plug MQR Plug [ ] Typ..025 [0.64] Typ..050 [1.27] Typ. Keyway Size Dimensions Ø Ø [20.19] L Min. Ø Ø.0433 [1.10] Typ. Plug (19 Position Shown) 7 Position Position Position

93 ircular onnectors MT Series Microminiature ircular onnectors How to Specify/ Ordering ode X Special, Does not fit description. MT 19 P Length in Inches (Min.) MIRODOT Threaded oupling Series Insulation olor or Finish Number of ontacts 1 ll white 6 are (unfinished) 9, 19 2 ll yellow 7 olor coded per MIL-STS-681, System I 3 ll gray 9 10 Solid color repeating (starts with black) 4 Gold plated ontact Type 5 Tin dipped gold plated P Twist Pin (Plug) S Socket (Receptacle) Wire Type Type E, 7 strand G 19 strand per MIL /11 Per Type ET, 7 strand (26 WG and 24 WG only) MIL-W-16878{ Type E, 19 strand L opper, solid D Type ET, 19 strand Q Stranded per MIL-W-22759/33 F 7 strand per MIL-W-22759/11 (28 WG only) Wire Size 4 24 WG 5 25 WG 6 26 WG 8 28 WG 0 30 WG Material and Finish Shell luminum, nickel plated ontact opper alloy, gold plated Insulator RYTON MT Series Plug Size 9 19 Dimensions Ø Ø Thd M10 x M12 x ircular onnectors Key 3 Ø.036 ±.005 [0.91 ±0.13] Typ. Ø Thd..800 [20.32] Position Position L Min. MT Series Plug (19 Position Shown) 89

94 ircular onnectors MT Series Microminiature ircular onnectors (ontinued) MT Series Receptacle Size 9 19 Dimensions Ø Hex. Thd. D Min. Ø E Min M10 x M12 x Keyway 9 Position 19 Position Hex. Thd [22.86] Typ. [ ] Ø E D L Min. Panel ut Out Ø MT Series Receptacle (19 Position Shown) 90

95 oaxial onnectors Introduction Product Facts Designed to accept 50, 70 and 93 ohm miniature coaxial cables Three types of connectors: Screw-on Series, Slide-on Series and Quick-onnect Series Temperature range -85 F to +257 F [-65 to +125 ] (with neoprene gasket or bend relief cap) -80 F to 392 F [-62 to +200 ] (with silicone gasket or bend relief cap) Dielectric Withstanding Voltage 1000 volts RMS at sea level ontact Resistance 3 milliohms max., D.. aptive ontacts Terminated connector contacts captivated from movement in both directions MIRODOT Standard oaxial onnectors are designed to accept 50, 70, and 93 Ohm miniature coaxial cables. These connectors are available as Screw-On Series, Slide-On Series, or Quick-onnect Series. The Screw-On Series is intermateable with the Gold Plated rimp Style oaxial onnector Series and offers the dependability of a threaded coupling. For enhanced safety, choose connectors with wire holes. hoose Slide-On Series for the fastest, most convenient mating and unmating. The Quick-onnect Series offers the convenience of Slide-On coupling with added retention provided by a snap ring located on the jack/receptacle side. onsult Tyco Electronics for special cable accommodations and mounting features. oaxial onnectors 4 91

96 oaxial onnectors Standard onnectors Performance Data Summary For Standard onnectors Mechanical aptive ontacts Terminated connector contacts captivated from movement in both directions. able Retention 50 Ohm connectors, 15 lb. min Ohm connectors, 25 lb. min Ohm connectors, 35 lb. min. 1 Recommended oupling Torque (Threaded Interface) 8 inch/pounds max. Recommended Receptacle Mounting Torque (ll Series) 8 inch/pounds max. Unmating Force (Slide-On Series) 1-7 pounds. ontact Protection (Unmated) Pin contact protected by coupling nut (threaded series) 2 or by housing (Quick- onnect and Slide-On Series). Socket protected by insulator and housing. ssembly Methods Straight Plugs & Jacks able Inner onductor: Soldered to contact. able Shield: rimped to jerk ring (solder optional). ngle Plugs able Inner onductor: Soldered to contact. able Shield: Soldered to ring & housing. Environmental Temperature Range (ontinuous Service) -85 F to +257 F [-65 to +125 ] (with Neoprene gasket or bend relief cap). -80 F to 392 F [-62 to +200 ] (with Silicone gasket or bend relief cap). Vibration 3,4 MIL-STD-202, Method 204, Test condition (15 G peak). No physical damage or electrical discontinuities in excess of 1 microsecond. Shock 3,4 MIL-STD-202, Method 213, Test ondition H. No physical damage or electrical discontinuity after shock. Thermal Shock MIL-STD-202, Method 107, Test ondition. Moisture Resistance 3 MIL-STD- 202, Method 106. Salt Spray 3 MIL-STD-202, Method 101, Test ondition (48 hours). Electrical Impedance Designed to be compatible with 50, 70, or 93 Ohm miniature coaxial cable. Dielectric Withstanding Voltage 1000 volts RMS at sea level. ontact Resistance 3 milliohms max., D.. urrent apacity 3 amps, D.. Insulation Resistance 5 x 10 3 Megohms 500 volts D.. Voltage Standing Wave Ratio 5 (VSWR) Typical 50 Ohm series, 1.2 max. to 2 GHz. Materials Housing, Nut, Jerk Ring rass per STM--16. Insulator TEFLON per STM-D Pin ontact (Plugs) rass per STM--16. Socket ontact (Jacks & Receptacles) eryllium opper per STM end Relief aps (Plugs & Jacks) Neoprene or Silicone Rubber per ZZ-R-765. Gaskets (Jacks & Receptacles) Neoprene or Silicone Rubber per ZZ-R-765. Lockwasher #425 ronze lloy. Plating ontacts Gold per MIL-G-45204, Type II, Grade, lass 1. Housing, Nut, Jerk Ring, Lockwasher Silver per QQ-S-365, Type II, Grade,.0002 [.005] min. Notes: 1 Termination to cables with foamed dielectrics excluded. Straight connector jerk rings must be soldered to cable shield. 2 Pin protector required. See individual connector specifications. 3 Screw-On Series, threaded interface. 4 Tyco Electronics recommends the use of safety wired connectors in vibration and shock environment. See individual specifications for connectors with safety wire holes. 5 VSWR is a system specification. Where performance is critical, purchase Tyco Electronics cable assemblies with Screw-On or Quick-onnect Series connectors and specify VSWR testing and mating connector part number. 92

97 oaxial onnectors Standard onnectors Screw-On Series See page 128 for mating options. Jack Plug S-50 Ohm Series S-70 Ohm Series S-93 Ohm Series S-50 Ohm Series S-70 Ohm Series S-93 Ohm Series ulkhead Jack S-50 Ohm Series S-70 Ohm Series S-93 Ohm Series Receptacle S-50 Ohm Series S-70 Ohm Series S-93 Ohm Series Right-ngle Plug S-50 Ohm Series S-70 Ohm Series S-93 Ohm Series Receptacle S-50 Ohm Series S-70 Ohm Series S-93 Ohm Series oaxial onnectors Printed ircuit Receptacle S-50 Ohm Series S-70 Ohm Series S-93 Ohm Series Right-ngle Printed ircuit Receptacle S-50 Ohm Series S-70 Ohm Series S-93 Ohm Series

98 oaxial onnectors Standard onnectors Screw-On Series (ontinued) Plugs S-50, 70 & [ ] Pin Pin Protector Part No. Dim. Dim. able Jacket Instruction Former ssembly Max. Special Features Sheet No. MIRODOT I.S. No. Tool S-50 Series (50 Ohm).190 [4.83] -32 UNF-2 Thread Dia Solderless ssembly RF-SM Dia RF-SM Dia Solderless ssembly RF-SM Dia RF-SM Hex Solderless ssembly, Hex Nut RF-SM Hex Hex Nut RF-SM , Hex Hex Nut,.187 [4.75] Hex able lamp Nut RF-SM , Dia [4.75] Hex able lamp Nut RF-SM Hex Solderless, Hex Nut w/ Safety Wire Holes,.021 [0.53] Wire Max RF-SM Hex , 2 Hex Nut RF-SM , Hex Hex Nut w/ Safety Wire Holes, [0.53] Wire Max RF-SM Hex Hex Nut, Designed for Dual Shield able RF-SM Hex Hex Nut RF-SM S-70 Series (70 Ohm).216 [5.49] -32 UNEF-2 Thread Dia Solderless ssembly RF-SM Dia RF-SM Dia RF-SM Dia Solderless ssembly RF-SM Hex Hex Nut w/ Safety Wire Holes, [0.35] Wire Max RF-SM Dia RF-SM S-93 Series (93 Ohm).250 [6.35] -32 UNEF-2 Thread Dia Solderless ssembly RF-SM Dia RF-SM Dia Silicone end Relief ap RF-SM Dia able Inner onductor, [0.78] Max RF-SM Dia RF-SM Hex Hex Nut RF-SM Hex Hex Nut w/ Safety Wire Holes, [0.38] Wire Max RF-SM Pin protected. 2 Hole in ferrule permits soldering to clamp ring and shield for increased cable pullout strength. 94

99 oaxial onnectors Standard onnectors Screw-On Series (ontinued) Right-ngle Plugs S-50, 70 & 93 NGLE PLUG Dim. Dim. Dim. able Part No. Jacket Max. S-50 Series (50 Ohm).190 [4.83] -32 UNF-2 Thread Dia Hex Hex Dia S-70 Series (70 Ohm).216 [5.49] -32 UNEF-2 Thread Dia Hex Hex S-93 Series (93 Ohm).250 [6.35] -32 UNEF-2 Thread Dia Dia Hex Hex Hex Hex Special Features Instruction Sheet No. Former MIRODOT I.S. No. ssembly Tool RF-SM Hex Nut RF-SM Hex Nut w/ Safety Wire Holes, RF-SM [.533] Wire Max. Dual Shield able RF-SM RF-SM Hex Nut w/ Safety Wire Holes, RF-SM [.355] Wire Max. Hex Nut RF-SM RF-SM RF-SM Hex Nut RF-SM Hex Nut RF-SM Hex Nut w/ Safety Wire Holes, RF-SM [.381] Wire Max. Hex Nut w/ Safety Wire Holes,.015 [.381] Wire Max., RF-SM Silicone end Relief ap oaxial onnectors 4 95

100 oaxial onnectors Standard onnectors Screw-On Series (ontinued) Jacks S-50, 70 & [10.16] Max. Panel Ø.375 Hex. [9.52].375 [9.52] Hex..292 Min. [7.42] Mounting Nut Lock Washer Ø.313 Min. [7.95] Fig. 1 Fig. 2 Mounting Hole Part No. Fig. Dim. Dim. able Instruction Former Jacket Special Features Sheet No. MIRODOT Max. I.S. No. ssembly Tool S-50 Series (50 Ohm).190 [4.83] -32 UNF-2 Thread RF-SM RF-SM Hex ollet able lamp RF-SM S-70 Series (70 Ohm).216 [5.49] -32 UNEF-2 Thread RF-SM RF-SM RF-SM S-93 Series (93 Ohm).250 [6.35] -32 UNEF-2 Thread RF-SM RF-SM RF-SM No Mounting Flat, Hex Nut able lamp RF-SM-92 96

101 oaxial onnectors Standard onnectors Screw-On Series (ontinued) Receptacles Max. Panel Max. Panel E Ø Min. Solder Lug D Hex. Turret Mounting Nut Solder Lug D Hex. Solder Pot Mounting Nut F Min. Fig. 1 Fig. 2 Mounting Hole for Fig. 1 & 2 Ø.037 [.940] Typ. D Ø.037 [.940] Typ..245 [6.22].100 ±.005 [2.54 ±.127] Typ. Ø.055 Min. [1.40] Typ..200 ±.005 [5.08 ±.127] Typ. Fig. 3 Fig. 4 Mounting Pattern for Fig. 3 & 4 Part No. Fig. Dim. Dim. Dim. Dim. D Dim. E Dim. F Special Features S-50 Series (50 Ohm).190 [4.83] -32 UNF-2 Thread Wrench Flats No Mounting Flat Wrench Flats No Mounting Flat Wrench Flats No Mounting Flat Wrench Flats No Nut or Solder Lug, Threads into Panel Wrench Flats Housing Isolated by Nylon Insulator Hex Dia Dia Dia Wrench Flats 3.50 No Mounting Thread, Solder or Press into Panel Hex w/ Safety Wire Holes,.014 [.355] Wire Max Dia Dia Outer Legs S-70 Series (70 Ohm).216 [5.49] -32 UNEF-2 Thread Hex No Mounting Flat Hex No Mounting Flat Hex Dia Dia oaxial onnectors 4 97

102 oaxial onnectors Standard onnectors Screw-On Series (ontinued) Receptacles (ontinued) Part No. Fig. Dim. Dim. Dim. Dim. Dim. Dim. D E F Special Features S-93 Series (93 Ohm).250 [6.35] -32 UNEF-2 Thread Hex No Mounting Flat Hex No Mounting Flat Wrench Flats Housing Isolated by Nylon Insulator Hex Dia Dia Dia. 98

103 oaxial onnectors Standard onnectors Slide-On Series ll plugs shown below mate with all jacks/receptacles shown below. Jack SOS-50 Ohm Series SOS-70 Ohm Series SOS-93 Ohm Series Plug SOS-50 Ohm Series SOS-70 Ohm Series SOS-93 Ohm Series ulkhead Jack SOS-50 Ohm Series SOS-70 Ohm Series SOS-93 Ohm Series Right-ngle Plug SOS-50 Ohm Series SOS-70 Ohm Series SOS-93 Ohm Series Receptacle SOS-50 Ohm Series SOS-70 Ohm Series SOS-93 Ohm Series Plug Receptacle SOS-50 Ohm Series SOS-70 Ohm Series SOS-93 Ohm Series Right-ngle Printed ircuit Receptacle SOS-50 Ohm Series SOS-70 Ohm Series SOS-93 Ohm Series oaxial onnectors 4 ulkhead Plug SOS-50 Ohm Series SOS-70 Ohm Series SOS-93 Ohm Series Printed ircuit Receptacle SOS-50 Ohm Series SOS-70 Ohm Series SOS-93 Ohm Series

104 oaxial onnectors Standard onnectors Slide-On Series (ontinued) Straight Plugs.290 [7.37] Max. Panel Hex. D Hex. Ø ontact Tail Solder Lug Mounting Nut Fig. 1 Fig. 2 Plug Receptacle.500 [12.70] Max. Panel Ø E Min. Hex. Hex. Mounting Nut Lock Washer Fig. 3 ulkhead Plug Mounting Hole for Fig. 2 & 3 Part No. Fig. Dim. Dim. Dim. Dim. Dim. able D E Max. Jacket Special Features SOS-50 Series (50 Ohm) Turret Pin ontact Tail Solder Pot ontact Tail Straight Pin ontact Tail 1 SOS-70 Series (70 Ohm) Turret Pin ontact Tail Solder Pot ontact Tail Straight Pin ontact Tail 1 SOS-93 Series (93 Ohm) Turret Pin ontact Tail Solder Pot ontact Tail Straight Pin ontact Tail 1 1 Lockwasher supplied in place of solder lug. Instruction Former Sheet No. MIRODOT I.S. No. ssembly Tool RF-SM RF-SM RF-SM RF-SM RF-SM RF-SM RF-SM RF-SM

105 oaxial onnectors Standard onnectors Slide-On Series (ontinued) Jacks.520 [13.21] Ø.250 [6.35].375 [9.53] Hex..375 [9.53] Hex. Ø.313 [7.95] Min. Mounting Nut Lock Washer Fig. 1 Fig. 2 Mounting Hole Part No. Fig. SOS-50 Series (50 Ohm) SOS-70 Series (70 Ohm) SOS-93 Series (93 Ohm) Dim. able Jacket Max Special Features Instruction Former ssembly Sheet No. MIRODOT I.S. No. Tool RF-SM RF-SM RF-SM RF-SM RF-SM [7.75] Dia. Over.R. ap RF-SM-105 Hex Nut able lamp RF-SM-92 Right-ngle Plugs Ø.250 [6.35] oaxial onnectors Part No. SOS-50 Series (50 Ohm) SOS-70 Series (70 Ohm) SOS-93 Series (93 Ohm) Dim. Dim. able Max. O.D Special Features Instruction Former Sheet No. MIRODOT I.S. No. ssembly Tool RF-SM RF-SM RF-SM RF-SM

106 oaxial onnectors Standard onnectors Slide-On Series (ontinued) Receptacles Max. Panel Max. Panel Ø E Min. D Hex. D Hex. Solder Lug Mounting Nut Turret Solder Lug Mounting Nut Solder Pot Fig. 1 Fig. 2 Mounting Hole for Fig. 1 & [6.22].100 ±.005 [2.54 ± 0.13] Typ..200 ±.005 [5.08 ± 0.13] Typ. D Ø.055 Min. [1.40] Typ. Ø.037 Typ. [.940] Ø.037 Typ. [.940] Fig. 3 Fig. 4 Mounting Pattern for Fig. 3 & 4 Part No. Fig. Dim. Dim. Dim. Dim. Dim. D E SOS-50 (50 Ohm), SOS-70 (70 Ohm), & SOS-93 (93 Ohm) Series Hex Dia Dia Dia Hex Hex Thd. Special Features No Nut or Lockwasher, Threads into Panel 102

107 oaxial onnectors Standard onnectors Quick-onnect Series Plug Q-50 Ohm Series Q-70 Ohm Series Q-93 Ohm Series Jack Q-50 Ohm Series Q-70 Ohm Series Q-93 Ohm Series Receptacle Q-50 Ohm Series Q-70 Ohm Series Q-93 Ohm Series Right-ngle Plug Q-50 Ohm Series Q-70 Ohm Series Q-93 Ohm Series oaxial onnectors Receptacle Q-50 Ohm Series Q-70 Ohm Series Q-93 Ohm Series

108 oaxial onnectors Standard onnectors Quick-onnect Series (ontinued) Straight Plugs Part No. Q-50 Series (50 Ohm) Q-70 Series (70 Ohm) Q-93 Series (93 Ohm) Dim. Dim. able Jacket Max Special Features Instruction Former ssembly Sheet No. MIRODOT I.S. No. Tool Solderless ssembly RF-SM RF-SM Solderless ssembly RF-SM RF-SM RF-SM Solderless ssembly RF-SM RF-SM Mates with Only RF-SM-90 Right-ngle Plugs Ø Part No. Q-50 Series (50 Ohm) Q-70 Series (70 Ohm) Q-93 Series (93 Ohm) Dim. Dim. Dim. able Jacket Max. Special Features Mates with Only Instruction Former Sheet No. MIRODOT I.S. No. ssembly Tool RF-SM RF-SM RF-SM RF-SM

109 oaxial onnectors Standard onnectors Quick-onnect Series (ontinued) Jacks Part No. Q-50 Series (50 Ohm) Q-93 Series (93 Ohm) Dim. Dim. able Jacket Max Special Features Instruction Former Sheet No. MIRODOT I.S. No. ssembly Tool RF-SM RF-SM Receptacles Max. Panel Max. Panel Hex. D Hex. Hex. D Hex. F Min. Solder Lug Turret Mounting Nut Solder Lug Solder Pot Mounting Nut E Ø Min. Fig. 1 Fig. 2 Mounting Hole Part No. Fig. Dim. Dim. Dim. Dim. D Dim. E Dim. F Special Features Q-50 Series (50 Ohm) & Q-70 Series (70 Ohm) No Mounting Flat No Mounting Flat Thd No Nut or Solder Lug, Threads into Panel No Mounting Flat, Split Solder Lug Q-93 Series (93 Ohm) No Mounting Flat No Mounting Flat No Mounting Flat, Mates with & Only oaxial onnectors 4 105

110 oaxial onnectors Twinax Plugs: For cables with two inner conductors and one shield Standard onnectors Twinax Series Fig. 1 Slide-On Series Fig. 2 Screw-On Series Part No. Fig Dim. Dim. able Jacket Max Special Features Instruction Former Sheet No. MIRODOT I.S. No. ssembly Tool RF-SM RF-SM RF-SM RF-SM Twinax Receptacles and Jacks: Max. Panel Max. Panel Hex. D Hex. Hex. D Hex. Lockwasher Washer Fig. 1 Slide-On Series Solder Pot Mounting Nut Lockwasher Solder Pot Mounting Nut Fig. 2 Slide-On Series or Screw-On Series Max. Panel D Hex. Hex. F Min. E Ø Min. Mounting Nut Lockwasher Fig. 3 Slide-On Series or Screw-On Series Mounting Hole Part No. Fig Dim. Dim. Dim. Dim. Dim. Dim. able Special Instruction Former D E F Max. Features Sheet No. MIRODOT Jacket I.S. No. ssembly Tool Lockwasher not included RF-SM RF-SM [1.91] Max. Panel when mated with a Screw-On plug,.180 [4.57] Max. Panel when mated with a Slide-On plug [6.48] Max. Panel when mated with a Screw-On plug,.360 [9.14] Max. Panel when mated with a Slide-On plug. 106

111 oaxial onnectors Standard onnectors Triax Series and Terminals Triax Plugs: For cables with one inner conductor and two isolated shields Part No Dim. Dim. able Jacket Special Features Max Dia Dia Hex Nut w/ Safety Wire Holes, Hex [.686] Wire Max. Instruction Former Sheet No. MIRODOT I.S. No. ssembly Tool RF-SM RF-SM RF-SM-73 Triax Receptacle: Triax dapter:.160 Max. [4.06] Panel 1.11 [28.19] Ø.438 [11.13] Min..160 Max. [4.06] Panel 1.09 [27.69] Ø.501 Min. [12.73] 0.50 Hex. [12.70] 0.56 Hex. [14.22] Nut 0.56 Hex. [14.22] 0.62 Hex. [15.75].468 [11.89] Min. Lockwasher Mounting Nut Lockwasher Mounting Nut Part Number Mounting Hole Part Number Mates with Triax Plug, oth Ends Mounting Hole Terminals Fig. 1 Fig. 2 Terminals are gold plated. See applicable MIRODOT drawing for solder and crimp instructions. Ø D Ø Part No. Dim. Dim. Dim. Dim. D able Max. Dielectric able Max. Inner onductor Fig oaxial onnectors 4

112 oaxial onnectors Standard onnectors Module locks D.242 [6.15] E.375 [9.53] The five faces of basic block can be used to mount any one of 10 different terminations. The 5 faces are coded with letters as shown above. The 10 terminations are coded with Nos Part number, to be complete, must show face location and termination Nos. desired. (Ex: illustration shows D5 E1) Ordering part number will be converted to a MIRODOT assigned number at time of ordering. We do not stock complete assemblies. Size Part No. Dim. H 50 Ohm * Ohm * Ohm * *Part number to be completed by customer. omputer Part Number will be assigned by Tyco Electronics. Interfaces/Terminations Termination Number Mating Type Description S S Q Q SOS SOS Receptacle Plug with Knurl Nut Receptacle Plug Receptacle Plug.125 [3.18].320 [8.13].125 [3.18].345 [8.76].255 [6.48].290 [7.37] Ø Ø Ø 50 Series 70 Series 93 Series Thread Thread Dia. Dia. Dia UNF UNF UNEF UNEF UNEF UNEF Interfaces/Terminations (ontinued) Termination Number Mating Type Description.350 [8.89] S S ulkhead Stud.160 Max. [4.06] Panel Ø.191 Min. [4.85].420 [10.67] ulkhead Plug with Plug, Hex. Nut Receptacle Hex. Nut With Wire Holes.160 Max. [4.06] Panel Ø Min..320 [8.13].320 [8.13] 50 Series 70 Series 93 Series.250 Hex. [6.35].173 Min. [4.39] Mounting Nut Solder Lug Hex. Height Turret Min. Mounting Nut Solder Lug Thread Thread Hex. Min. Hole Min. Hole Thread Hex. Thread Hex. Dia. Height UNF UNF UNF UNF UNF UNEF UNEF UNEF UNF UNEF UNEF UNEF Hex. Hex. Ø.030 [.762] 3 Plcs. 108

113 oaxial onnectors Standard onnectors aps, Hoods aps, Screw-On Series For Receptacles and Jacks Ø 0.20 [5.08] Diamond Knurl 0.20 [5.08] 0.13 [3.30] Fig. 1 With Grounding Pin 0.12 [3.05] Ø.094 [2.39] Part No. Fig. Dim. S-50 Series S-70 Series S-93 Series Ø Diamond Knurl Fig. 2 Without Grounding Pin Ø.094 [2.39] Material rass per QQ--626 Finish Silver plate per QQ-S-365,.0002 [.005] min. Note: ll caps can be supplied with.094 [2.39] Dia. bead chain and end ring. When ordering, specify chain length and end ring hole size (.130 [3.30],.140 [3.56],.167 [4.24], or.193 [4.90] Dia.) Receptacle Hoods Hex. Ø Part No Material rass per QQ--626 Finish Silver plate per QQ-S-365,.0002 [.005] min. Dim. Dim. Dim. Thread UNF UNEF UNEF UNEF UNEF For Receptacle Series S-50, Q-50, Q-70 S-70, SOS-50, SOS-70, SOS-93 S-93, Q-93 S-70, SOS-50, SOS-70, SOS-93 Twinax/Triax Receptacle oaxial onnectors 4 109

114 oaxial onnectors Standard onnectors dapters Feed-Thru dapters for Screw-On Series.160 Max. [4.06] Panel Ø.313 Min. [7.95] Hex. X Y Hex. X Y Hex. Nut.294 [7.47] Min. Lockwasher Mounting Nut Fig. 1 Fig. 2 Mounting Hole Part No. Fig Dim. Dim End X Is End Y Is S-50 Receptacle S-50 Receptacle S-50 Receptacle S-50 Receptacle S-70 Receptacle S-70 Receptacle S-70 Receptacle S-70 Receptacle S-93 Receptacle S-93 Receptacle S-93 Receptacle S-93 Receptacle N and TN/MIRODOT dapters for Screw-On, Slide-On, and Quick- onnect Series For mating N/TN connectors to MIRODOT standard connectors..469 Min. [11.91].501 [12.73] Min. Mounting Hole End Is: onfiguration End Is: 50 Series 70 Series 93 Series Part No. Part No. Part No. N Plug Screw-On (S) Type Plug Screw-On N Plug Type Receptacle N Receptacle Screw-On (S) Type Plug N Receptacle Screw-On (S) Type Receptacle N ulkhead Receptacle Screw-On (S) Type Plug Mounting information: Housing Hex..688 [17.48], Mtg. Nut Hex..625 [15.88], Max. Panel.090 [2.29].

115 oaxial onnectors N and TN/MIRODOT dapters for Screw-On, Slide-On, and Quick- onnect Series (ontinued) Standard onnectors dapters (ontinued).469 Min. [11.91].501 [12.73] Min. Mounting Hole End Is: onfiguration End Is: 50 Series 70 Series 93 Series Part No. Part No. Part No. N ulkhead Receptacle Screw-On (S) Type Receptacle Screw-On (S) TN Plug Type Receptacle TN Receptacle Screw-On (S) Type Receptacle N Plug Slide-On (SOS) Type Plug N Plug Slide-On (SOS) Type Receptacle N Receptacle Slide-On (SOS) Type Plug N Receptacle Slide-On (SOS) Type Receptacle oaxial onnectors N Slide-On (SOS) ulkhead Type Receptacle Receptacle N Plug Quick-onnect (Q) Type Receptacle 4 N Receptacle Quick-onnect (Q) Type Receptacle 1 Mounting information: Housing Hex..688 [17.48], Mtg. Nut Hex..625 [15.88], Max. Panel.090 [2.29]. 111

116 oaxial onnectors Gold Plated rimp Style oaxial onnectors Performance Data Summary For Gold Plated rimp Style oaxial onnectors Mechanical aptive ontacts Terminated connector contacts captivated from movement in both directions. able Retention 50 Ohm connectors, 15 lb. min. 70 Ohm connectors, 25 lb. min. 93 Ohm connectors, 25 lb. min. Recommended oupling Torque (Threaded Interface) 8 inch/pounds max. [.904 Nm] Recommended Receptacle Mounting Torque (Threaded Interface) 8 inch/pounds max. [.904 Nm] ontact Protection (Unmated) Pin contact protected by coupling nut. Socket protected by insulator and housing. ssembly Methods Straight Plugs & Jacks able Inner onductor: rimped to contact. able Shield: rimped under housing. Right-ngle Plugs able Inner onductor: rimped to contact. able Shield: rimped under housing. Environmental Temperature Range (ontinuous Service) -80 F to +392 F. [-62 to +200 ]. Vibration 1,2 MIL-STD-202, Method 204, Test condition (15 G peak). No physical damage or electrical discontinuities in excess of 1 microsecond. Shock 1,2 MIL-STD-202, Method 213, Test ondition H. No physical damage or electrical discontinuity after shock. Thermal Shock MIL-STD-202, Method 107, Test ondition. Moisture Resistance 1 MIL-STD- 202, Method 106. Salt Spray 1 MIL-STD-202, Method 101, Test ondition (48 hours). Electrical Impedance Designed to be compatible with 50, 70, or 93 Ohm miniature coaxial cable. Dielectric Withstanding Voltage 1000 volts RMS at sea level. ontact Resistance 4 milliohms max., D.. ontact apacity 3 amps, D.. Insulation Resistance 5 x 10 3 Megohms 500 volts D.. Voltage Standing Wave Ratio 3 (VSWR) Typical 50 Ohm series, 1.2 max. to 2 GHz. Materials Housing, Nut, Inner Sleeve rass per STM--16, 35% Zinc. Insulator TEFLON per STM-D Pin & Socket ontacts eryllium opper per STM Middle Sleeve opper lloy. Facial Seal 4, Sealing Sleeve & Gasket Silicone Rubber per ZZ-R-765. Lockwasher #425 ronze lloy. Plating ontacts, Housing, Nut, Inner Sleeve, Middle Sleeve, Lockwasher Gold per MIL-G-45204, Type II, Grade, lass 1. NOTES: 1 Screw-On Series threaded interface. 2 Tyco Electronics recommends the use of wired connectors in vibration and shock environments. See individual specifications for connectors with wire holes. 3 VSWR is a system specification. Where performance is critical, purchase Tyco Electronics cable assemblies (See page 127) and specify VSWR testing and mating connector part numbers. 112

117 oaxial onnectors Gold Plated rimp Style oaxial onnectors Screw-On Series Straight Plugs Hex. Ø Fig. 1 Partial Hex. Nut Fig. 2 Knurl Nut Hex. Hex. Fig. 3 Full Hex. Nut Fig. 4 Hex. Nut w/ 3 Safety Wire Holes Part No. Fig. Dim. Dim. able Instruction Former Max. Special Features Sheet No. MIRODOT I.S. No. 50 Ohm Series.190 [4.83] -32 UNF-2 Thread RF-SM RF-SM RF-SM RF-SM With environmental seal RF-SM With environmental seal RF-SM With environmental seal RF-SM With environmental seal RF-SM RF-SM RF-SM RF-SM RF-SM With environmental seal RF-SM With environmental seal RF-SM With environmental seal RF-SM With environmental seal RF-SM Dual shield cable version of RG 188 & RF-SM-8 70 Ohm Series.216 [5.49] -32 UNEF-2 Thread RF-SM RF-SM RF-SM RF-SM With environmental seal RF-SM With environmental seal RF-SM With environmental seal RF-SM With environmental seal RF-SM-8 oaxial onnectors 4 113

118 oaxial onnectors Gold Plated rimp Style oaxial onnectors Screw-On Series (ontinued) Straight Plugs (ontinued) Part No. Fig. 93 Ohm Series.250 [6.35] -32 UNEF-2 Thread Dim. Dim. able Instruction Max. Special Features Sheet No. Former MIRODOT I.S. No RF-SM RF-SM RF-SM RF-SM-8 With environmental seal RF-SM-8 With environmental seal RF-SM-8 With environmental seal RF-SM-8 With environmental seal RF-SM-8 Right-ngle Plugs Ø Knurl Nut Part No. Dim. Dim. Dim. able Jacket Max. 50 Ohm Series.190 [4.83] -32 UNF-2 Thread Ohm Series.216 [5.49] -32 UNEF-2 Thread Ohm Series.250 [6.35] -32 UNEF-2 Thread Special Features Instruction Former Sheet No. MIRODOT I.S. No RF-SM-11 With environmental seal RF-SM RF-SM-11 With environmental seal RF-SM RF-SM-11 With environmental seal RF-SM RF-SM-11 With environmental seal RF-SM

119 oaxial onnectors Gold Plated rimp Style oaxial onnectors Screw-On Series (ontinued) Jacks Hex. Max. Panel Ø.313 [7.95] Min..375 Hex..375 Hex. [9.53] Nut [9.53].292 Min. [7.42] Mounting Nut Lockwasher Fig. 1 Fig. 2 Mounting Hole Part No. Fig. Dim. Dim. Dim. able Jacket Max. Special Features 50 Ohm Series.190 [4.83] -32 UNF-2 Thread Dual Shield able Version of RG 188 & Dual Shield able Version of RG 188 & Ohm Series.216 [5.49] -32 UNEF-2 Thread Ohm Series.250 [6.35] -32 UNEF-2 Thread Instruction Former Sheet No. MIRODOT I.S. No RF-SM RF-SM RF-SM RF-SM RF-SM RF-SM RF-SM RF-SM RF-SM RF-SM-8 oaxial onnectors 4 115

120 oaxial onnectors Gold Plated rimp Style oaxial onnectors Screw-On Series (ontinued) Receptacles Max. Panel Max. Panel Solder Lug D Hex. Turret Mounting Nut Solder Lug D Hex. Solder Pot Mounting Nut F Min. Ø E Min. Fig. 1 Fig [6.22] Ø.037 [0.94] Typ. Ø.037 [0.94] Typ. Fig. 3 Fig. 4 Part No. Fig. Dim. Dim. Dim. Dim. D Dim. E Dim. F Special Features 50 Ohm Series.190 [4.83] -32 UNF-2 Thread Hex Wrench Flats No Mounting Flat Wrench Flats Thd. No Nut or Solder Lug, Threads into Panel Dia Dia Ohm Series.216 [5.49] -32 UNEF-2 Thread Hex Dia. 93 Ohm Series.250 [6.35] -32 UNEF-2 Thread Dia Dia Hex D.100 ±.005 [2.54 ± 0.13] Typ. Ø.055 Min. [1.40] Typ. Mounting Hole for Fig. 1 & 2 Mounting Pattern for Fig. 3 & ±.005 [5.08 ± 0.13] Typ. Gold Plated rimp Style oaxial onnectors ssembly Tools Table 1. ontact rimp Tools MIRODOT Part No. Manufacturers Part No stro Tool Table 2. Housing rimp Tools MIRODOT Thomas & etts Max. able Part No. Part No. Diameter WT [2.24] WT [2.79] WT [3.94] Sealing Sleeve Inner Sleeve Pin ontact Housing Insulator Housing Sub-assembly Plug 116 Middle Sleeve able Insulator Socket ontact Housing Insulator Housing Gasket Jack

121 oaxial onnectors LEPR/ON Ultra-Miniature onnectors Performance Data Summary For LEPR/ON onnectors Mechanical aptive ontacts Terminated connector contacts captivated from movement in both directions. able Retention 10 lb. min. when properly assembled to RG196/U and RG178/U cable. Recommended oupling Torque (Threaded Interface) 24 inch/ounces max. Recommended Receptacle Mounting Torque (ll Series) 24 inch/ounces max. Typical able cceptance Dimensions Inner conductor:.012 [0.31] nom. Dielectric:.039 [0.99] max. Shield:.059 [1.50] max. Jacket:.081 [2.06] max. ontact Protection (Unmated) Twist pin contact protected from damage by insulator. Tube socket protected by connector housing. ssembly Methods Straight Plugs & Jacks able Inner onductor: rimped to contact. able Shield: rimped under housing. Right-ngle Plugs able Inner onductor: Soldered to contact. able Shield: rimped under housing. Environmental Temperature Range (ontinuous Service) -85 F to +392 F [-65 to +200 ]. Vibration 1,2 MIL-STD-202, Method 204, Test ondition (15 G peaks). No physical damage or electrical discontinuities in excess of 1 microsecond. Shock 1,2 MIL-STD-202, Method 213, Test ondition H. No physical damage or electrical discontinuity after shock. Thermal Shock MIL-STD-202, Method 107, Test ondition. Moisture Resistance 1 MIL-STD- 202, Method 106. Salt Spray 1 MIL-STD-202, Method 101, Test ondition (48 hours). Electrical Impedance Designed to be compatible with 50 Ohm coaxial cable RG178/U. Dielectric Withstanding Voltage 450 volts RMS at sea level, 250 volts RMS at 50,000 ft [15,240 m], 150 volts RMS at 70,000 ft. [21,336 m] ontact Resistance 8 milliohms max., D.. ontact apacity 3 amps, D.. Insulation Resistance 10 4 Megohms 500 volts D.. Voltage Standing Wave Ratio 3 (VSWR) Typical 50 Ohm Series, 1.2 Maximum to 2 GHz. Materials Housing, Nut, Ferrule rass per STM--16. Insulator TEFLON per STM-D Pin & Socket ontact opper lloy. rimp Sleeve opper lloy. Lockwasher #425 ronze lloy. Plating ontacts, Housing, Nut, Ferrule, rimp Sleeve, Lockwasher Gold per MIL-G-45204, Type II, Grade, lass 1. Notes: 1 Screw-On Series, threaded interface. 2 Tyco Electronics recommends the use of safety wired connectors in vibration and shock environments. See individual specifications with wire holes. 3 VSWR is a system specification. Where performance is critical, purchase Tyco Electronics cable assemblies with Screw-On connectors (See page 129) and specify VSWR testing and mating connector part numbers. oaxial onnectors 4 117

122 oaxial onnectors LEPR/ON Ultra-Miniature onnectors Screw-On Series Featuring Twist Pin, Pin and Socket ontacts, Standard Interface MIRODOT twist pin, pin and socket contacts are used in LEPR/ON connectors. Twist pin contact pins are produced from beryllium copper material with a gold-plated finish and constructed with helicallywound stress free cable of spring copper around a highly conductive soft copper core, terminated with a hemispherical weld. Twist pin contacts contain seven selfwiping spring surfaces, designed for consistent continuity and very low noise level. Twist pin contacts are self-aligning because of the contactengaging-end configuration. The sockets are a closed entry tubular-type contact, made of gold-plated copper alloy. The connectors are designed to be used with coaxial cables RG196/U and RG178/U. The connectors are designed with the contacts completely protected for reliability. The use of twist pin contacts makes the connectors very rugged for their size unf-2 [3.18] (Modified).015 Dia. [0.38] 3 Places ( Only).580 [14.73] Solder enter onductor to ontact.015 Dia. [0.38] 3 Places ( Only).380 [9.65].395 [10.03] UNF-2 [3.18] (Modified) Straight Plugs 1 Right-ngle Plug 1 Part No. Nut Style [3.96] Hex [4.06] Dia. Knurl [3.96] Hex. w/ Safety Wire Holes ssembly instructions: RF-SM UNF-2 [3.18] (Modified).580 [14.73] Part No. Nut Style [3.96] Hex [4.06] Dia. Knurl [3.96] Hex. w/ Safety Wire Holes ssembly instructions: RF-SM [14.73].270 [6.86].093 Max. [2.36] Panel.156 [3.96] Hex. Stk..270 [6.86].156 [3.96] Hex. Stk UNF-2 [3.18] (Modified) Jack 1 Part Number Instruction Sheet Number Former MIRODOT I.S. Number RF-SM-12 ulkhead Jack 1 Part Number Instruction Sheet Number Former MIRODOT I.S. Number RF-SM [3.96] 2 Plcs UNF-2 [3.18] (Modified).140 [3.56].093 Max. [2.36] Panel.425 [10.80].022 Solder Pot [0.56] I.D. Turret.156 [3.96] 2 Plcs..425 [10.80].260 [6.60] UNF-2 [3.18] (Modified).093 Max. [2.36] Panel.022 Turret I.D. [0.56].022 Solder Pot I.D. [0.56] Front Mount Receptacle 1 Part No. ontact Tail Turret Solder Pot Rear Mount Receptacle 1 Part No. ontact Tail Turret Solder Pot Mounting hole pattern and assembly tools shown on page 123.

123 oaxial onnectors LEPR/ON Ultra-Miniature onnectors Screw-On Series (ontinued) Featuring Twist Pin, Pin and Socket ontacts, Standard Interface (ontinued) unf-2 [3.18] (Modified).225 [5.72].172 [4.37].026 Dia. Typ. [.660] Straight Printed ircuit Receptacle 1 Part No [9.40] avity Potted With Epoxy UNF-2 [3.18] (Modified) Thd..370 [9.40] avity Potted With Epoxy.120 [3.05].385 [9.78].172 [4.37] UNF-2 [3.18] (Modified) Thd..385 [9.78].120 [3.05].172 [4.37].026 Dia. [6.60] 5 Plcs. Shipping Fixture.026 Dia. [6.60] Typ. Right-ngle Printed ircuit Receptacle 1 (Small Mounting Pattern) Part Number Right-ngle Printed ircuit Receptacle 1 (Standard Mounting Pattern) Part Number [5.21].545 [13.84].080 Max. [2.03] Panel.125 -UNF44-2 Thd. [3.18] (Modified) oth Ends.202 [5.13] Min..217 [5.51].250 Hex. [6.35] 2 Plcs UNF [5.49] Thd..156 [3.96] Hex UNF-2 [3.18] (Modified) Feed-Thru ulkhead dapter (oth Ends are Receptacle Interface) Part Number oaxial onnectors.490 [12.45].275 [6.99].093 Max. [2.36] Panel.156 [3.96] Sq..285 [7.24] avity Filled With Epoxy.115 [2.92] Right-ngle Receptacle 1 Part Number Straight Plug 1 Mounting hole pattern and assembly tools shown on page

124 oaxial onnectors LEPR/ON Ultra-Miniature onnectors Screw-On Series (ontinued) Featuring Twist Pin, Pin and Socket ontacts with Locking Interface The MIRODOT LEPR/ON coaxial connector series is now offered with a unique locking interface feature. This new coupling design permits the user to lock the coaxial plug, when mated to its receptacle, preventing any axial rotation. This adaptation is especially popular on connector installations requiring straight or 90 cable terminations firmly held in a fixed position. The locking interface is especially suited for telecommunications and instrumentation applications. Solder enter onductor to ontact.395 [10.03].015 Dia. 3 Plcs. Ref. [0.38] ( Only).015 Dia. 3 Plcs. [0.38] ( Only).380 [9.65] UNF-2 [3.18] (Modified) UNF-2 [3.18] (Modified).580 [14.73] Straight Plug 1 Right-ngle Plug 1 Part No. Nut Style [3.96] Hex [4.06] Dia. Knurl [3.96] Hex. w/ Safety Wire Holes ssembly instructions: RF-SM-12, Part No. Nut Style [3.96] Hex [4.06] Dia. Knurl [3.96] Hex. w/ Safety Wire Holes ssembly instructions: RF-SM-13, ssembly tools; page

125 oaxial onnectors LEPR/ON Ultra-Miniature onnectors Screw-On Series (ontinued) Featuring Twist Pin, Pin and Socket ontacts with Locking Interface (ontinued).590 [14.99].590 [14.99].285 [7.24].093 Max. [2.36] Panel.156 [3.96] UNF-2 [3.18] (Modified) Plcs. [3.96] UNF-2 [3.18] (Modified) Straight Jack 1 Part Number Instruction Sheet Number Former MIRODOT I.S. Number RF-SM-12 ulkhead Jack 1 Part Number Instruction Sheet Number Former MIRODOT I.S. Number RF-SM UNF-2 [3.18] (Modified).022 Solder Pot [.559] I.D..156 Hex. [3.96] 2 Plcs..022 Solder Pot [.559] I.D. Turret Plcs. [3.96] Turret.155 [3.94].093 Max. [2.36] Panel.440 [11.18] UNF-2 Thd. [3.18] (Modified).275 [6.99].440 [11.18].093 Max. [2.36] Panel Front Mount Receptacle 1 Rear Mount Receptacle w/ Locking Interface 1 Part No. ontact Tail Solder Pot Turret Part No. ontact Tail Turret Solder Pot.156 [3.96] UNF-2 [3.18] (Modified).240 [6.10].172 [4.37].026 Dia. [0.66] Typ UNF-2 [3.18] (Modified).490 [12.45].275 [6.99].093 Max. [2.36] Panel Straight Printed ircuit Receptacle 1 Part Number [9.78] avity Potted With Epoxy oaxial onnectors.115 [2.92] avity Filled With Epoxy.156 [3.96] Sq..300 [7.62] UNF-2 [3.18] (Modified).385 [9.78].120 [3.05].172 [6.77] 4 Right-ngle Receptacle 1 Part Number Dia. [.660] 5 Plcs. Shipping Fixture 1 Mounting hole pattern and assembly tools shown on page 123. Right-ngle Printed ircuit Receptacle 1 Part Number

126 oaxial onnectors LEPR/ON Ultra-Miniature onnectors Slide-On Series Featuring Twist Pin, Pin and Socket ontacts LEPR/ON Slide-On onnectors offer a convenient mating style along with Ultra-miniature size. Inner contacts are twist pin tubular sockets in plugs and twist pin contacts for jacks and receptacles. Positive housing contact is provided by a three finger contact in the plug housing..125 [3.18].610 [15.49].125 [3.18] Dia..440 [11.18] Straight Plug 1 Part Number Instruction Sheet Number Former MIRODOT I.S. Number RF-SM [9.65] Right-ngle Plug 1 Part Number Instruction Sheet Number Former MIRODOT I.S. Number RF-SM Hex. [6.35] 2 Plcs..445 [11.30].265 [6.73] UNF-2 Thd. [4.83].140 Max. [3.56] Panel Ø.191 [4.85] Min..335 [8.51].640 [16.26].093 Max. [2.36] Panel.490 [12.45] Mounting Hole.156 Hex. [3.96] 2 Plcs UNF-2 [3.18] (Modified) Right-ngle ulkhead Mount Plug 1 Part Number Instruction Sheet Number Former MIRODOT I.S. Number RF-SM-76 Straight ulkhead Jack 1 Part Number Instruction Sheet Number Former MIRODOT I.S. Number RF-SM [3.99].220 [5.59].495 [12.57].022 Solder Pot [0.56] I.D..093 Max. [2.36] Panel Turret.125 [3.18] Dia. Straight Jack 1 Part Number Instruction Sheet Number Former MIRODOT I.S. Number RF-SM-15 1 Mounting hole and assembly tools shown on page UNF-2 [3.18] (Modified).156 Hex. [3.96] 2 Plcs. Front Mount Receptacle 1 Part No. ontact Tail Turret Solder Pot 122

127 oaxial onnectors LEPR/ON Ultra-Miniature onnectors Slide-On Series (ontinued) Featuring Twist Pin, Pin and Socket ontacts (ontinued).022 Solder Pot [.559] I.D..156 [3.96] Hex..156 [3.96] Hex. 2 Plcs UNF-2 [3.18] (Modified).335 [8.51].495 [12.57] Rear Mount Receptacle.093 Max. [2.36] Panel Turret.115 [2.92] [6.99] [12.45].156 Sq. [3.96].385 [9.78] avity Filled With Epoxy Part No. ontact Tail Turret Solder Pot Mounting Hole shown below..425 [10.80] Right-ngle Receptacle Mounting Hole Shown elow Part Number Dia. Typ [0.66].097 Dia. [2.46].385 [9.78].120 [3.05].172 [4.37].260 [6.60].172 [4.37] Straight Printed ircuit Receptacle Mounting Hole Pattern Shown elow Part Number Dia. Typ. [0.66] Right-ngle Printed ircuit Receptacle Mounting Hole Pattern Shown elow Part Number [2.90] Min..126 [3.20] Min. ulkhead Receptacle Mounting Hole LEPR/ON onnector ssembly Tools Typ. [ ] Typ. [ ] Standard Pattern.046 Dia. Min. [1.17] 5 Holes Typ. [ ] Typ. [ ] Printed ircuit Receptacle Mounting Hole Pattern Small Pattern onnectors and Only.046 Dia. Min. [1.17] 5 Holes oaxial onnectors 4 ontact rimp Tool Housing rimp Tool onnector ontact rimp No. stro Tool Part No. MIRODOT Part No. Thomas & etts Part No. Straight onnector Only WT

128 oaxial onnectors LEPR/ON Ultra-Miniature onnectors (ontinued) N / LEPR/ON onnector dapters unf-2 [3.18] (Modified) End End End UNF-2 [3.18] (Modified) End.900 [22.86].850 [21.59] End is MIRODOT End is N Plug End is N Receptacle End is MIRODOT Screw-On Plug Screw-On Receptacle Part Number Part Number [24.13] UNF-2 [3.18] (Modified) UNF-2 [3.18] (Modified) End End End End End is N Plug End is MIRODOT Screw-On Plug with Locking Interface End is N Receptacle End is MIRODOT Screw-On Receptacle with Locking Interface Part Number Part Number [21.97].835 [21.21] End End UNF-2 [3.18] (Modified) End End.785 [19.94] End is Screw-On Receptacle End is N Plug End is N Plug End is MIRODOT Slide-On Plug Part Number Part Number

129 oaxial onnectors LEPR/ON Ultra-Miniature onnectors (ontinued) N / LEPR/ON onnector dapters (ontinued).800 [20.32] UNF-2 [3.18] (Modified).900 [22.86] End End End End End is N Plug End is MIRODOT Receptacle with Locking Interface End is N Plug End is MIRODOT Slide-On Receptacle Part Number Part Number UNF-2 [3.18] (Modified) End End End End.965 [24.51].900 [22.86] End is N Receptacle End is MIRODOT Screw-On Plug End is N Receptacle End is MIRODOT Slide-On Plug Part Number Part Number UNF-2 [3.18] (Modified) End End End End [25.78] End is N Receptacle End is MIRODOT Screw-On Plug with Locking Interface End is N Receptacle.965 [24.51] Part Number Part Number End is MIRODOT Slide-On Receptacle oaxial onnectors 4 125

130 oaxial onnectors LEPR/ON Ultra-Miniature onnectors Snap-Lock Series Product Facts Simple coupling design eliminates the need for tools and saves assembly time Positive locking mechanism provides its own fail-safe features Inspection of the mated connector is fast, simple and effective Push-Pull design allows higher panel density Quick-connect and disconnect features Performance Data Summary For Snap-Lock onnectors Electrical Impedance Designed to be compatible with 50 Ohm coaxial cables (Dual Shield RG 196). Dielectric Withstanding Voltage 450 volts RMS at sea level (Operating). ontact Resistance 8 milliohms max. at 3 amps. verage resistance: 4 milliohms Insulation Resistance 10 4 megohms min. Voltage Standing Wave Ratio (VSWR) 3.4 max., 1.3 min. to 12 GHz. Environmental Temperature Range -85 F to +257 F [-65 to +125 ]. Vibration MIL-STD-202, Method 204, Test condition D. No change in electrical discontinuity in excess of 1 microsecond. Shock MIL-STD-202, Method 213, Test ondition. No electrical discontinuity or evidence of physical damage. Mechanical able cceptance Dimensions enter conductor:.012 [0.31] nom. Dielectric:.040 [1.02] max. Shield:.080 [2.03] max. Jacket:.090 [2.29] max.. ll-rimp ssembly enter contacts and shield are crimped individually. Durability 500 mating cycles. Materials ody and ody omponents rass per QQ--626 omp 360. ontact Material opper lloy. rimp Sleeves Leaded opper. Insulators TEFLON per STM-D Lockwashers #425 ronze lloy. Plating Gold per MIL-G-45204, Type II, Grade, lass [6.35].750 [19.05].219 [5.56] [ ].719 [18.26].093 Max. [2.36] Panel.406 [10.31] 8-32 UN-2 (Modified).312 [7.92] [ ] Straight Plug Part Number ulkhead Jack, Rear Mount Part Number D Hole Dimensions For Panel Mounting.093 Max. [2.36] Panel.625 [15.88].406 [10.31] 8-32 UN-2 (Modified) Receptacle, Rear Mount Part Number [5.56].312 [7.92].219 [5.56].312 [7.92].625 [15.88].093 Max..285 [2.36] Panel [7.24] 8-32 UN-2 (Modified) Receptacle, Front Mount Part Number onnector/able ssembly rimp Tools enter ontact and Shield Tool SKT & Pin rimp Housing rimp Part No

131 oaxial onnectors able ssemblies apability The experience Tyco Electronics has gained through years of pioneering efforts in the development of MIRODOT miniaturized cable and connectors is available to customers in the assembly of complex cable/connector combinations. This experience offers the customer low cost and no tooling charges, precision construction, thorough inspection and prompt delivery. The capability also makes it possible for the designer to specify a complete assembly or harness with the understanding that Tyco Electronics will deliver a custom fabrication equal in quality to the MIRODOT components it contains. These assemblies are made to the customer s specifications or are designed by the ompany s experienced engineers to fit particular requirements. Special features are light weight, reduced size, high operating temperatures and comprehensive layouts. How To Order 1. Specify MIRODOT part numbers. onnector, one end. onnector, other end. able 2. Specify normal length. Overall length Jacks Plugs O.. L. Jacks Right ngles O.. L. Right ngles Right ngles 3. Specify length tolerance. Standard tolerance ssembly Length Tolerance 0 thru 12-1/2" ±1/8" Over 12-1/2" thru 1000" ±1% rounded to nearest 1/4" Over 1000" ±1% rounded to nearest 1". Special tolerance Tolerances as close as ±.5% are available for most cable assemblies at a premium rate. onsult Tyco Electronics for details. 4. Specify cable strip (pplies to cable assemblies with only one connector). Not stripped. Standard strip O.. L. 1 2". Or length between connectors Jacks Plugs Jacks Right ngles able Length etween onnectors able Length etween onnectors able Length etween onnectors Right ngles Right ngles 1 2" 1 2" Standard Strip. Special strip - specify style Example: onnector: one end other end Length: 36" overall, standard tolerance oaxial onnectors 4 127

132 oaxial onnectors able ssemblies (ontinued) Mating Interface hart Plugs Jacks and Receptacles Series Description Page Series Description Page S50 Standard 94, 95 S50 Standard 96, Ohm Gold Plated rimp Style 113, Ohm Gold Plated rimp Style 115, Ohm ap Ohm Feed Thru dapter 110, 111 S70 Standard 94, 95 S70 Standard 96, Ohm Gold Plated rimp Style 113, Ohm Gold Plated rimp Style 115, Ohm ap Ohm Feed Thru dapter 110, 111 S93 Standard 94, 95 S93 Standard 96, Ohm Gold Plated rimp Style Ohm Gold Plated rimp Style 115, Ohm ap Ohm Feed Thru dapter 110, 111 SOS 50 Standard 99, 100 SOS 50 Standard 99, 102 SOS 70 Standard 100, 101 SOS 70 Standard 101, 102 SOS 93 Standard 100, 101 SOS 93 Standard 101, 102 Q 50 Standard 103, 104 Q 50 Standard 103 Q 70 Standard 104 Q 70 Standard 103 Q 93 Standard 104 Q 93 Standard 103 Screw-On Twinax 106 Screw-On Twinax 106 Slide-On Twinax 106 Slide-On Twinax 106 Screw-On Triax 107 Screw-On Triax 107 Screw-On LEPR/ON onnector 118 Screw-On LEPR/ON onnector 118, 119 Screw-On LEPR/ON onnector Interlocking Interface 120 Screw-On LEPR/ON onnector Interlocking Interface 121 Slide-On LEPR/ON onnector 122 Slide-On LEPR/ON onnector 122,

133 oaxial onnectors able cceptance Dimensions Standard onnectors Screw-On Series Straight Plugs Page 94 S-50 S-70 S-93 onnector Max. Max. Max. Part No. Jacket Shield Dielectric Max. Inner onductor oaxial onnectors 4 129

134 oaxial onnectors able cceptance Dimensions (ontinued) Screw-On Series (ontinued) Right-ngle Plugs Page 95 S-50 S-70 S-93 onnector Max. Max. Max. Part No. Jacket Shield Dielectric Nom. Inner onductor ny ny ny ny ny ny ny ny ny ny ny ny ny Jacks Page 96 S-50 S-70 S-93 onnector Max. Max. Max. Part No. Jacket Shield Dielectric Max. Inner onductor

135 oaxial onnectors able cceptance Dimensions (ontinued) Slide-On Series Straight Plugs Page 100 SOS-50 onnector Max. Max. Max. Part No. Jacket Shield Dielectric SOS SOS Max. Inner onductor Right-ngle Plugs Page 101 SOS-50 onnector Max. Max. Max. Part No. Jacket Shield Dielectric SOS SOS Nom. Inner onductor ny ny ny ny Jacks Page 101 SOS-50 onnector Max. Max. Max. Part No. Jacket Shield Dielectric SOS SOS Max. Inner onductor oaxial onnectors 4 131

136 oaxial onnectors able cceptance Dimensions (ontinued) Quick-onnect Series Straight Plugs Page 104 Q-50 onnector Max. Max. Max. Part No. Jacket Shield Dielectric Q Q Max. Inner onductor ny Right-ngle Plugs Page 104 Q-50 onnector Max. Max. Max. Part No. Jacket Shield Dielectric Q Q Nom. Inner onductor ny ny ny ny Jacks Page 105 Q-50 onnector Max. Max. Max. Part No. Jacket Shield Dielectric Q Max. Inner onductor Twinax Plugs Page 106 onnector Max. Max. Max. Part No. Jacket Shield Dielectric Max. Inner onductor Jacks Page 106 onnector Max. Max. Max. Part No. Jacket Shield Dielectric Max. Inner onductor

137 oaxial onnectors able cceptance Dimensions (ontinued) Triax Plugs Page 107 onnector Part No Max. Jacket Max. Max. Max. Max. Max. Outer Outer Inner Inner Inner Shield Dielectric Shield Dielectric onductor.124 Single.085 Single Shield 2.26 Shield Single Shield Single Shield Gold Plated rimp Style oaxial onnectors Straight Plugs Pages 113, 114 onnector Max. Max. Nom. Part No. Jacket Dielectric Inner onductor 50 Ohm Series * * * * Ohm Series * * Ohm Series * * Right-ngle Plugs Page 114 onnector Max. Max. Nom. Part No. Jacket Dielectric Inner onductor 50 Ohm Series Ohm Series Ohm Series oaxial onnectors 4 133

138 oaxial onnectors able cceptance Dimensions (ontinued) Gold Plated rimp Style oaxial onnectors (ontinued) Jacks Page 115 onnector Max. Max. Nom. Part No. Jacket Dielectric Inner onductor 50 Ohm Series Ohm Series Ohm Series LEPR/ON onnectors ll Pages onnector Max. Max. Nom. Part No. Jacket Dielectric Inner onductor ll

139 oaxial onnectors Hermetic onnectors oaxial Screw-On, Slide-On Series Material and Finish 50 onnector uses thread. 70 onnector uses thread. 93 onnector uses 1/4-32 thread. Housing (1) old rolled steel silver plate. Gasket (2) Neoprene or silicone rubber. Insulator (3) TEFLON. Glass Seal (4) enter ontact (5) Nickel Iron alloy contact with slotted turret type solder pot (other terminations available). Service and Performance Data Temperature Range -65 F to 450 F [ 54 to 232 ]. Electrical 750 V working voltage. Performance 1200 V test at sea level. Insulation Resistance 5000 megohms at 500 VD (room temperature). Shock 100 G s minimum. Pressure 100 PSI minimum. Leak Rate Per Seal Less than 1.04 x 10-8 cc/sec. (.001 Micron cubic ft/hr) of 100% helium tested at one atmosphere pressure differential far exceeding requirements of MIL and MIL Plating Silver unless otherwise specified. ulkhead Solder Mount X.281 [7.14].125 [3.18] D.125 [3.18].438 [11.13] Ø Ø X Y Ø.438 Ø.125 [11.13] D Typ. [3.18] Fig. 1 Fig. 2 Fig. 3 X.25 [6.35] D Ø Ø Part No. Fig. Dia. Dia. ±.015 D X* Y* S S S-50 S S-50 * S indicates Screw-On Series Dimensions are subject to change without notice. ulkhead Solder Mount, Panel Insulated Ø X.328 [8.33] Ø.203 [5.16] Y Ø Glass Seal X Ø Y Ø X Y oaxial onnectors D.125 [3.18].063 [1.60] Glass Seal.047 [1.19].047 [1.19].063 [1.60].063 D [1.60] Fig. 1 Fig. 2 Fig. 3 Part No. Fig. Dia. Dia. D X* Y* S S-50 S S-93 S SOS-50 S-50 * S indicates Screw-On Series; SOS indicates Slide-On Series Dimensions are subject to change without notice

140 oaxial onnectors Hermetic onnectors (ontinued) oaxial Screw-On, Slide-On Series (ontinued) Microminiature oaxial Receptacles G.094 [2.38] Hex. X Y D M H Thd. F E Mounting Hole Part No. Hex. Thd. D E F G H M X* Y* /16-32 UNEF S-50 S /8-32 UNEF S-93 S-93 * S indicates Screw-On Series Dimensions are subject to change without notice. Solder Mount Slide-On Series Receptacles X Ø Ø E D Part No. Dia. Dia. ±.015 D E X* SOS-50, 70, SOS-50, 70, 93 * SOS indicates Slide-On Series Dimensions are subject to change without notice. Single Hole Mount Receptacles D.094 [2.38] X Hex. H F E Thd. Mounting Hole Part No. Hex. Thd. D E F H X* UNEF S /8-32 UNEF S-93 * S indicates Screw-On Series Dimensions are subject to change without notice. 136

141 NNONIS onnectors Table of ontents Nano-Miniature onnectors Introduction Nano-Miniature onnectors Technical and Performance Data DULOE Rectangular onnectors Introduction Wired onnectors Single Row Two Row Part Numbering Guideline for Wired onnectors Jumper ssemblies Single onnectors , 146 Two Row onnectors , 148 Part Numbering Guideline for Jumper ssemblies Surface Mount onnectors Horizontal Single Row Two Row Vertical Single Row Two Row , 156 Thru-Hole onnectors Horizontal 1 Row to 2 Row Row to 4 Row Vertical 1 Row to 2 Row Row to 4 Row Part Numbering Guideline for SMT and Through-Hole onnectors Flex Termination "Duckbill" onnectors Two Row , 163 Part Numbering Guideline for Flex Termination "Duckbill" onnectors Solder up onnectors Single Row Two Row Part Numbering Guideline for Solder up Termination Panel Mount onnectors Single Row Two Row Part Numbering Guideline for Panel Mount onnectors Part Number Index ross Reference

142 NNONIS onnectors Table of ontents (ontinued) ircular onnectors Introduction Quick Disconnect Plug ssemblies , 181 Plug ssemblies with ackshells , 183 Receptacle ssemblies, Flush Mount , 185 Threaded oupling Plug ssemblies , 187 Plug ssemblies with ackshells , 189 Receptacle ssemblies, Panel Mount , 191 Panel Mount Receptacle ssemblies w/ackshells , 193 Part Numbering Guideline for Environmentally Sealed ircular onnectors Part Number Index ross Reference oaxial onnectors Introduction Typical VSWR and Insertion Loss Ohm oax onnectors Part Numbering Guideline for 50 Ohm oax onnectors Horizontal SMT 50 Ohm oax onnectors Part Numbering Guideline for Horizontal SMT 50 Ohm oax onnectors Ohm oax with Mixed Signal onnectors Part Numbering Guideline for 50 Ohm oax w/mixed Signal onnectors Part Number Index ross Reference Strip onnectors Introduction Wired onnectors Part Numbering Guideline for Strip Wired onnectors Surface Mount onnectors Thru-Hole onnectors Part Numbering Guideline for SMT and Thru-Hole onnectors Part Number Index ross Reference

143 NNONIS onnectors Nano-Miniature onnectors - Introduction 5Nanonics onnectors Nano-miniature connectors constitute a family of interconnect devices with center to center contact spacing of.025. In comparison to other connector families, they are often thought of as the smallest practical connector system for separable interfaces. Despite being smaller, these nano-miniature connectors are tested with a few size-related modifications per the guidelines of MIL-DTL (written for.050 micro-miniature connectors). Nano-miniature connectors combine their appealing size and weight with desired performance attributes such as high reliability, low contact resistance and wide operating temperature range, making them among the smallest and toughest connectors available to designers. The ontact System Nanonics connectors utilize the same contact system throughout the entire product family. This contact system uses a spring socket as opposed to most connector designs, which use a spring pin. In this design, the socket member of the contact pair employs a dimple located inside the contact tube. When the pin is engaged with this socket, the dimple creates the desired spring action by forcing the pin to offset to the opposite side of the socket tube. The result is a gold-on-gold mating area covering a minimum of 180 of the contact surface. This also creates a desirable mating force of no greater than 6 ounces per contact and a resistance of.003 ~.008 ohms. This type of contact system begins with a preplated eu alloy material that is then formed to yield a rugged, seamless contact. oth the blind-bore seamless pin and the seamless one piece socket have a burnished gold finish on both the inside and outside surfaces. This gold finish provides contact integrity for superior reliability and environmental performance. ontact onfiguration rimp rea Seamless lind-ore Pin Wire Stop Dimple for Engaging Force 139

144 NNONIS onnectors Nano-Miniature onnectors Technical and Performance Data Electrical ontact Resistance ohms urrent Rating 1 amp max. per contact Dielectric Withstanding Voltage Volts RMS 60 Hz at room ambient conditions. t sea level 500V. t 70,000 ft. 150V. Insulation Resistance 5000 megohms min. (@ 500 VD) at room ambient conditions. Magnetic Permeability 2 mu max. Mechanical ontact Engagement & Separation Engaging force is 6.0 oz. max. Separation force is 0.5 oz. min. Mating Force Maximum alculated as 10 oz. multiplied by the number of contacts. Environmental Temperature Range -200 to +200 Shock No discontinuity in excess of 1 µ sec. when tested in accordance with MIL-STD-1344, Method , Test ondition E. Vibration No discontinuity in excess of 1 µ sec. when tested in accordance with MIL-STD-1344, Method , Test ondition IV. Solderability onnectors shall meet the test requirements of MIL-STD-202, Method 208. Durablity No mechanical or electrical defects detrimental to the function of the connectors after 500 cycles of mating and unmating, without the use of hardware. Humidity fter exposure to humidity as specified by MIL-STD-1344, Method , Type II, IR shall be 1 megohm min. (@ 100 VD) within 2 hours of conditioning and 1000 megohms min. (@ 100 VD) after 24 hours of conditioning. Salt Spray onnectors shall meet the performance requirements of contact resistance, mating and unmating forces, and contact retention after being subjected to the 48 hour 5 % solution salt spray test per MIL-STD-1344, Method 1001, ondition. Fluid Immersion Unmated connectors after being fully immersed in one of the following fluids, for the prescribed time, will mate at a force of 10 oz. multiplied by the number of contacts or less: Perchloroethylene, 2 hours; Lubricating oil per MIL-L-23699, 20 hours. rimp Tensile Strength (Unassembled contacts with crimped stranded wire terminations) Wires will not pull out of the contacts when the following axial load is applied: #30 WG, 2 lbs. Thermal Vacuum Outgassing onnectors shall have a maximum total mass loss (TML) of 1.0 % of the original specimen mass and a maximum collected volatile condensable materials (VM) content of 0.1 % of the original specimen mass when tested in accordance with SP-R Material and Finish ontacts eu alloy plated with gold per MIL-G Type II over nickel per QQ-N-290. Plastic Insulators and Shells 30% glassed filled Liquid rystal Polymer (LP). Metal Shells 6061-T6 luminum with electroless nickel plating per MIL Stainless steel and gold plated shells are also available. 140

145 DULOE Rectangular onnectors DULOE Rectangular onnectors DULOE Rectangular onnectors 5 Nanonics D-style rectangular connectors have earned the distinction of being the most popular and widely utilized style of Nano connectors. These connectors incorporate the DULOE polarization scheme. This polarization scheme negates the need for mating guide pins and does not increase the package size. The DULOE series of connectors are available in both machined aluminum and molded plastic shells, both in one and two row connector housings. Single row configurations commonly have standard pin counts from 5 to 51, while the higher density two row configurations have pin counts from 9 to 65. These connectors can be terminated in many different ways. Standard configurations include wires, surface mount, thru-hole, solder cup, duckbill, and panel mount. Wired harness assemblies and custom configurations can also be accommodated. Such custom configurations include filtered, hermetic, environmentally sealed, and blind mate connectors. This family of connectors is designed to meet the requirements of MIL-DTL , with a few size related modifications. Designed primarily for the military and aerospace industry, the DULOE series is especially well suited when high reliability, coupled with reduced size and weight, are serious design parameters. clear example of this is the use of Nanonics connectors in such applications as smart munitions, missile defense, aircraft communications, and UV s. In addition to the above applications, with the wide temperature range of the DULOE connector (-200 to +200 ), the space and petroleum industries have also found many uses for this connector. The performance and reliability at cryogenic temperatures, along with the low outgassing material properties, has led to an increased usage in space applications. Such applications include nitrogencooled optics, low and high earth orbiting satellites, telescopes, deep space probes, orbiters, and rovers. On the opposite end of the spectrum, the petroleum exploration industry utilizes these connectors for their performance and reliability in downhole environments at temperatures exceeding

146 DULOE Rectangular onnectors Wired onnectors Single Row, Flying Leads.075 [1.91] 2 Plcs..205 [5.21].117 [2.97].223 [5.66].112 [2.84] 2 Plcs. Plug Position [1.09] 2 Plcs..038 [0.97] Typ..086 [2.18].043 [1.09] 2 Plcs..086 [2.18] L Position [0.97] Typ. L Receptacle Product Facts Plastic or Metal Shell Standard Sizes: 5, 9, 15, 25, 37, and 51 Factory wired to your specifications ontact Tyco Electronics for custom configurations Plug with Flying Leads Drawing Number Receptacle with Flying Leads Drawing Number Size Dimensions L [5.92] [7.84] [2.54] [8.46] [10.38] [5.08] [12.27] [14.19] [8.89] [18.62] [20.54] [15.24] [26.24] [28.16] [22.86] [35.13] [37.05] [31.75] 142

147 DULOE Rectangular onnectors Wired onnectors Two Row, Flying Leads.075 [1.91] 2 Plcs. DULOE Rectangular onnectors Plug.205 [5.21].117 [2.97].223 [5.66].112 [2.84] 2 Plcs. 5 Position [0.97] Typ..058 Position 1 [1.47] 2 Plcs..038 [0.97] Typ. Product Facts Receptacle Plastic or Metal Shell Standard Sizes: 9, 15, 25, 37, 51 and 65 Factory wired to your specifications ontact Tyco Electronics for custom configurations.126 [3.20].058 [1.47] 2 Plcs. L Plug with Flying Leads Drawing Number [1.02] Typ. Position Size.126 [3.20] Position Size Size Dimensions L [5.82] [7.84] [2.54] [7.72] [9.74] [4.45] [10.90] [12.92] [7.62] [14.71] [16.73] [11.43] [19.15] [21.17] [15.88] [23.60] [25.62] [20.32] L Receptacle with Flying Leads Drawing Number [1.02] Typ. 143

148 DULOE Rectangular onnectors Part Numbering Guideline for Wired onnectors DULOE onnectors - Wire Terminations S X X XXX XX X XX XXX X lass Threads/Jackscrew S Dualobe Threads (Receptacles Only) Jackscrews (Plugs Only) Rows N Thread for 1.0 mm Jackscrews S 1 Row Q Thread for 1.2 mm Jackscrews T 2 Row M 1.0 mm Non aptive Jackscrew N 1.0 mm aptive Jackscrew Q 1.2 mm aptive Jackscrew onductor Length Type XXX Three numbers only, length is in inches ( i.e. 012 = twelve inches) L LP (Plastic) XX "" followed by two numbers, length is in centimeters ( i.e. 06 = six centimeters) M Metal (l, Ni Plate) MXX n "M" followed by two numbers, length is in meters ( i.e. M02 = two meters) Positions Position (single row only) onductor Type Position DX White TEFLON DM olor oded TEFLON per MIL-STD Position DY White PTFE M16878/6 DT White TEFZEL M22759/ Position D olor oded TEFLON GX TEFLON Ribbon able FEP Position Position onductor Size/Strands Position (two row only) 0 28 WG Solid 1 30 WG Solid 2 30 WG 7 Strand onfigurations 3 32 WG 7 Strand P Plug 4 34 WG 7 Strand S Receptacle 144

149 DULOE Rectangular onnectors Plug to Receptacle Product Facts Position 1 Plastic or Metal Shell Standard Sizes: 5, 9, 15, 25, 37, and 51 Factory wired to your specifications ontact Tyco Electronics for custom configurations Jumper ssembly onnectors Single Row Length as Specified in Part Number.075 [1.91] 2 Plcs..205 [5.21] Plug to Plug Drawing Number [2.97] Jumper ssembly, Plug To Plug, Single Row Dualobe, Plastic or Metal [1.09] 2 Plcs..086 [2.18] L Position [.97] Typ. DULOE Rectangular onnectors [2.18].043 [1.09] 2 Plcs..112 [2.85] 2 Plcs..223 [5.66] Length as Specified in Part Number.205 [5.21].043 [1.09] 2 Plcs..086 [2.18] L L Position [.97] Typ..075 [1.91] 2 Plcs Position 1 [.97] Typ. [2.97] Plug to Receptacle Drawing Number Jumper ssembly, Plug Size To Receptacle, Single Row Dimensions Dualobe, Plastic or Metal L [5.92] [7.84] [2.54] [8.46] [10.38] [5.08] [12.27] [14.19] [8.89] [18.62] [20.54] [15.24] [26.24] [28.16] [22.86] [35.13] [37.05] [31.75] 145

150 DULOE Rectangular onnectors Jumper ssembly onnectors Single Row (ontinued).043 [1.09] 2 Plcs..086 [2.18].112 [2.85] 2 Plcs..223 [5.66] Length as Specified in Part Number Position 1 L Position [0.97] Typ. Receptacle to Receptacle Drawing Number Jumper ssembly, Receptacle To Receptacle, Single Row Dualobe, Plastic or Metal Size Dimensions L [5.92] [7.84] [2.54] [8.46] [10.38] [5.08] [12.27] [14.19] [8.89] [18.62] [20.54] [15.24] [26.24] [28.16] [22.86] [35.13] [37.05] [31.75] 146

151 DULOE Rectangular onnectors Product Facts Plug to Receptacle Position 1 Plastic or Metal Shell Standard Sizes: 9, 15, 25, 37, 51 and 65 Factory wired to your specifications ontact Tyco Electronics for custom configurations Jumper ssembly onnectors Two Row Length as Specified in Part Number.075 [1.91] 2 Plcs..205 [5.21].117 [2.97] Plug to Plug Drawing Number Position 1 Jumper ssembly, Plug to Plug Two Row Dualobe, Plastic or Metal [1.47] 2 Plcs..126 [3.20] L.040 [1.02] Typ..038 [.97] Typ. DULOE Rectangular onnectors [3.20].058 [1.47] 2 Plcs..112 [2.85] 2 Plcs..223 [5.66] Length as Specified in Part Number.205 [5.21].058 [1.47] 2 Plcs..126 [3.20] L L.040 [1.02] Typ..038 [.97] Typ. Position [1.91] 2 Plcs..117 [2.97] Position [1.02] Typ..038 [.97] Typ. Plug to Receptacle Drawing Number Jumper ssembly, Plug To Receptacle, Two Row Dualobe, Plastic or Metal Size Dimensions L [5.82] [7.84] [2.54] [7.72] [9.74] [4.45] [10.90] [12.92] [7.62] [14.71] [16.73] [11.43] [19.15] [21.17] [15.88] [23.60] [25.62] [20.32] 147

152 DULOE Rectangular onnectors Jumper ssembly onnectors Two Row (ontinued).126 [3.20].058 [1.47] 2 Plcs..112 [2.85] 2 Plcs..223 [5.66] Length as Specified in Part Number Position 1 L.040 [1.02] Typ..038 [.97] Typ. Position 1 Receptacle to Receptacle Drawing Number Jumper ssembly, Receptacle To Receptacle, Two Row Dualobe, Plastic or Metal Size Dimensions L [5.82] [7.84] [2.54] [7.72] [9.74] [4.45] [10.90] [12.92] [7.62] [14.71] [16.73] [11.43] [19.15] [21.17] [15.88] [23.60] [25.62] [20.32] 148

153 DULOE Rectangular onnectors Part Numbering Guideline for Jumper ssemblies DULOE onnectors - Jumper Terminations J X X XXX XX X XX XXX X lass Threads/Jackscrews J Jumper Threads (Receptacles Only) Jackscrews (Plugs Only) Rows N Thread for 1.0 mm Jackscrews S 1 Row Q Thread for 1.2 mm Jackscrews T 2 Row M 1.0 mm Non aptive Jackscrews N 1.0 mm aptive Jackscrews Q 1.2 mm aptive Jackscrews onductor Length Type XXX Three numbers only, length is in inches ( i.e. 012 = twelve inches) L LP (Plastic) XX "" followed by two numbers, length is in centimeters ( i.e. 06 = 6 centimeters) M Metal (l, Ni Plate) MXX n "M" followed by two numbers, length is in meters ( i.e. M02 = 2 meters) Positions Position (single row only) onductor Type Position DX White Teflon DM olor oded Teflon per MIL-STD Position DY White PTFE M16878/6 DT White Tefzel M22759/ Position D olor oded Teflon GX Telfon Ribbon able Position Position onductor Size/Strands Position (two row only) 0 28 WG Solid 1 30 WG Solid 2 30 WG 7 Strand onfiguration 3 32 WG 7 Strand PP Plug to Plug, 1 to WG 7 Strand PR Plug to Receptacle, 1 to 1 PD Plug to Plug, low to high in row RR Receptacle to Receptacle, 1 to 1 DULOE Rectangular onnectors 5 149

154 DULOE Rectangular onnectors Surface Mount onnectors Horizontal, Single Row.025 [.64] Pitch.075 [.69] 2 Plcs..020 [.51] Typ..205 [5.21].117 [2.97].255 [6.48] Typ. Receptacle Jackscrews Omitted for larity Position [.97] Typ. Product Facts Plastic or Metal Shell Standard Sizes: 5, 9, 15, 25, 37, and 51 ontact Tyco Electronics for custom configurations Suggested pad layouts are available on the referenced drawings on the Tyco Electronics website.043 [1.09] 2 Plcs..086 [2.18] L Plug ssembly Drawing Number [.64] Pitch Plug ssembly,.020 Horizontal Surface Mount, [.51] Typ. Single Row Dualobe, Plastic or Metal [5.66].112 [2.84] 2 Plcs..273 [6.93] Typ. Position [.97] Typ..043 [1.09] 2 Plcs..086 [2.18] L Receptacle ssembly Drawing Number Receptacle ssembly, Horizontal Surface Mount, Single Row Dualobe, Plastic or Metal Size Dimensions L [1.27] [5.92] [7.84] [2.54] [2.54] [8.46] [10.38] [5.08] [4.45] [12.27] [14.19] [8.89] [7.62] [18.62] [20.54] [15.24] [11.43] [26.24] [28.16] [22.86] [15.88] [35.13] [37.05] [31.75] 150

155 DULOE Rectangular onnectors Receptacle Surface Mount onnectors Horizontal, Two Row.223 [5.66].025 [.64] Pitch.0125 [.318] Offset.020 [.51] Typ..112 [2.84] 2 Plcs [8.20] Typ. [6.93] Typ. DULOE Rectangular onnectors 5 Product Facts Plastic or Metal Shell Standard Sizes: 9, 15, 25, 37, 51 and 65 ontact Tyco Electronics for custom configurations Suggested pad layouts are available on the referenced drawings on the Tyco Electronics website.058 [1.47] 2 Plcs..126 [3.20] Position Size L Position [.97] Typ..040 [1.02] Typ. Receptacle ssembly Drawing Number [5.21].025 [.64] Pitch.0125 [.318] Offset.075 Receptacle ssembly, [.69] 2 Plcs. Horizontal Surface Mount, Two Row Dualobe, Plastic or Metal.117 [2.97] [6.48] Typ..020 [.51] Typ..305 [7.75] Typ. Jackscrews Omitted for larity Position [1.47] 2 Plcs..126 [3.20].038 [.97] Typ..040 [1.02] Typ. L Position Size Plug ssembly Drawing Number Size Dimensions Plug ssembly, Horizontal Surface LMount, [1.27] [5.82] [7.84] Two Row Dualobe, Plastic [2.54] or Metal [2.23] [7.72] [9.74] [4.45] [3.81] [10.90] [12.92] [8.89] [5.72] [14.71] [16.73] [11.43] [7.95] [19.15] [21.17] [15.88] [10.16] [23.60] [25.62] [20.32] 151

156 DULOE Rectangular onnectors Surface Mount onnectors Vertical, Single Row L Position [.97] Typ..043 [1.09] 2 Plcs..086 [2.18].025 [.64] Pitch Receptacle Product Facts Plastic or Metal Shell Standard Sizes: 5, 9, 15, 25, 37, and 51 ontact Tyco Electronics for custom configurations Suggested pad layouts are available on the referenced drawings on the Tyco Electronics website.223 [5.66] Receptacle ssembly Drawing Number [2.84] 2 Plcs..030 [.76] Typ. Receptacle ssembly, Vertical Surface Mount, Single Row Dualobe, Plastic or Metal Position 1 L.038 [.97] Typ..043 [1.09] 2 Plcs..025 [.64] Pitch.086 [2.18].205 [5.21].117 [2.97].030 [.76] Typ..075 [1.91] 2 Plcs. Plug ssembly Drawing Number Plug ssembly, Vertical Surface Mount, Size Dimensions Single Row Dualobe, Plastic or Metal L [1.27] [5.92] [7.84] [2.54] [2.54] [8.46] [10.38] [5.08] [4.45] [12.27] [14.19] [8.89] [7.62] [18.62] [20.54] [15.24] [11.43] [26.24] [28.16] [22.86] [15.88] [35.13] [37.05] [31.75] 152

157 DULOE Rectangular onnectors Product Facts Plastic or Metal Shell Standard Sizes: 5, 9, 15, 25, 37, and 51 ontact Tyco Electronics for custom configurations Suggested pad layouts are available on the referenced drawings on the Tyco Electronics website Surface Mount onnectors Vertical, Single Row with lternating Leads.043 [1.09] 2 Plcs. L.025 [.64].050 [1.27] Pitch Position [.97] Typ..086 [2.18] DULOE Rectangular onnectors [5.66].112 [2.84] 2 Plcs. Receptacle ssembly Drawing Number L.025 [.64].030 [.76] Typ. Receptacle ssembly, Vertical Surface Mount, lternating Leads Single Row Dualobe, Plastic or Metal.038 [.97] Typ [1.09] 2 Plcs. Position [1.27] Pitch.086 [2.18].205 [5.21].117 [2.97].030 [.76] Typ..075 [1.91] 2 Plcs. Plug ssembly Drawing Number Plug ssembly, Vertical Surface Mount, lternating Leads Single Row Dualobe, Plastic or Metal Size Dimensions L [1.27] [5.92] [7.84] [2.54] [2.54] [8.46] [10.38] [5.08] [4.45] [12.27] [14.19] [8.89] [7.62] [18.62] [20.54] [15.24] [11.43] [26.24] [28.16] [22.86] [15.88] [35.13] [37.05] [31.75] 153

158 DULOE Rectangular onnectors Surface Mount onnectors Vertical, Single Row with Integrated Standoffs Product Facts Metal Shell Standard Sizes: 5, 9, 15, 25, 37, and 51 ontact Tyco Electronics for custom configurations Suggested pad layouts are available on the referenced drawings on the Tyco Electronics website.043 [1.09] 2 Plcs. L.025 [.64] Pitch Position [.97] Typ..086 [2.18].253 [6.43].223 [5.66].072 [1.83] 2 Plcs. Receptacle ssembly Drawing Number Receptacle ssembly, Vertical Surface Mount, Single Row Dualobe, Metal w/ Integrated Standoffs Size Dimensions L [1.27] [5.92] [7.84] [2.54] [2.54] [8.46] [10.38] [5.08] [4.45] [12.27] [14.19] [8.89] [7.62] [18.62] [20.54] [15.24] [11.43] [26.24] [28.16] [22.86] [15.88] [35.13] [37.05] [31.75] 154

159 DULOE Rectangular onnectors Receptacle Surface Mount onnectors Vertical, Two Row.058 [1.47] 2 Plcs..126 [3.20] L Position [.318] [.97] Typ. Offset.040 [1.02] Typ..025 [.64] Pitch DULOE Rectangular onnectors 5 Product Facts Plastic or Metal Shell Standard Sizes: 9, 15, 25, 37, 51 and 65 ontact Tyco Electronics for custom configurations Suggested pad layouts are available on the referenced drawings on the Tyco Electronics website.223 [5.66] Receptacle ssembly Drawing Number [2.84] 2 Plcs..030 [.76] Typ. Receptacle ssembly, Vertical Surface Mount, Two Row Dualobe, Plastic or Metal Position 1 L.0125 [.318] Offset.038 [.97] Typ..126 [3.20].058 [1.47] 2 Plcs..040 [1.02] Typ..025 [.64] Pitch.205 [5.21].117 [2.97].030 [.76] Typ..075 [1.91] 2 Plcs. Plug ssembly Drawing Number Plug ssembly, Vertical Surface Mount, Two Row Dualobe, Plastic or Metal Size Dimensions L [1.27] [5.82] [7.84] [2.54] [2.23] [7.72] [9.74] [4.45] [3.81] [10.90] [12.92] [8.89] [5.72] [14.71] [16.73] [11.43] [7.95] [19.15] [21.17] [15.88] [10.16] [23.60] [25.62] [20.32] 155

160 DULOE Rectangular onnectors Surface Mount onnectors Vertical, Two Row with Integrated Standoffs Product Facts Metal Shell Standard Sizes: 9, 15, 25, 37, 51 and 65 ontact Tyco Electronics for custom configurations Suggested pad layouts are available on the referenced drawings on the Tyco Electronics website.058 [1.47] 2 Plcs..126 [3.20] L.0125 [.318] Offset Position [.64] Pitch.038 [.97] Typ..040 [1.02] Typ..253 [6.43].223 [5.66].072 [1.83] 2 Plcs. Receptacle ssembly Drawing Number Receptacle ssembly, Vertical Surface Mount, Two Row Dualobe, Metal w/ Integrated Standoffs Size Dimensions L [1.27] [5.82] [7.84].100 [2.54] [2.23] [7.72] [9.74].175 [4.45] [3.81] [10.90] [12.92].300 [8.89] [5.72] [14.71] [16.73].450 [11.43] [7.95] [19.15] [21.17].625 [15.88] [10.16] [23.60] [25.62].800 [20.32] 156

161 DULOE Rectangular onnectors Product Facts Receptacle Plastic or Metal Shell Standard Sizes: 5, 9, 15, 25, 37, and 51 ontact Tyco Electronics for custom configurations Suggested thru-hole layouts are available on the referenced drawings on the Tyco Electronics website Thru-Hole onnectors Horizontal, 1 Row to 2 Row,.050 Spacing.140 [3.56].223 [5.66].043 [1.09] 2 Plcs..086 [2.18].140 [3.56] L.112 [2.84] 2 Plcs. Position [.97] Typ..090 [2.29] Typ. Receptacle ssembly Drawing Number Receptacle ssembly, Horizontal Mount, Through Hole, 1 Row to 2 Row,.050 Spacing, Plastic or Metal.075 [1.91] 2 Plcs [1.27] Typ..273 [6.93] Typ..050 [1.27] Typ. DULOE Rectangular onnectors [5.21].117 [2.97].255 [6.48] Typ. Position [.97] Typ..043 [1.09] 2 Plcs..086 [2.18] L.090 [2.29] Typ. Plug ssembly Drawing Number Plug ssembly, Horizontal Mount, Through Hole, 1 Row to 2 Row,.050 Spacing, Plastic or Metal Size Dimensions L [5.92] [7.84] [2.54] [8.46] [10.38] [5.08] [12.27] [14.19] [8.89] [18.62] [20.54] [15.24] [26.24] [28.16] [22.86] [35.13] [37.05] [31.75] 157

162 DULOE Rectangular onnectors Thru-Hole onnectors Horizontal, 2 Row to 4 Row,.050 Spacing.240 [6.10].050 [1.27] Typ..223 [5.66].112 [2.84] 2 Plcs..273 [6.93] Typ. Receptacle Product Facts Plastic or Metal Shell Standard Sizes: 9, 15, 25, 37, 51 and 65 ontact Tyco Electronics for custom configurations Suggested thru-hole layouts are available on the referenced drawings on the Tyco Electronics website.126 [3.20].058 [1.47] 2 Plcs. Position Size.240 [6.10] L Position [.97] Typ..040 [1.02] Typ..090 [2.29] Typ. Receptacle ssembly Drawing Number Receptacle ssembly, Horizontal Mount, Through Hole, 2 Row to 4 Row,.050 Spacing, Plastic or Metal [1.91] 2 Plcs..050 [1.27] Typ..205 [5.21].117 [2.97].255 [6.48] Typ..126 [3.20] Position [.97] Typ..040 [1.02] Typ..058 [1.47] 2 Plcs. L.090 [2.29] Typ. Position Size Plug ssembly Drawing Number Size Dimensions L [5.82] [7.84] [2.54] [7.72] [9.74] [4.45] [10.90] [12.92] [7.62] [14.71] [16.73] [11.43] [19.15] [21.17] [15.88] [23.60] [25.62] [20.32] 158

163 DULOE Rectangular onnectors Product Facts Receptacle Plastic or Metal Shell Standard Sizes: 5, 9, 15, 25, 37 and 51 ontact Tyco Electronics for custom configurations Suggested thru-hole layouts are available on the referenced drawings on the Tyco Electronics website Thru-Hole onnectors Vertical Mount, 1 Row to 2 Row onnectors,.050 Spacing Position [1.09] 2 Plcs..086 [2.18].205 [5.21].117 [2.97] L.090 Lead Length Typ. [2.29] L.038 [.97] Typ..086 [2.18].296 [7.52] Plug ssembly Drawing Number Position [.97] Typ..050 [1.27] Typ..020 [0.51] Typ..140 [3.56] Plug ssembly, Vertical Mount, Through Hole, 1 to 2 Row,.050 Spacing, Plastic or Metal DULOE Rectangular onnectors [1.09] 2 Plcs..112 [2.84] 2 Plcs..140 [3.56].223 [5.66].314 [7.98].090 [2.29] Lead Length Typ..050 [1.27] Typ..020 [0.51] Typ. Receptacle ssembly Drawing Number Receptacle ssembly, Vertical Mount, Through Hole, 1 Row to 2 Row, Dimensions.050 Spacing, Plastic or Metal Size L [5.92] [7.84] [2.54] [8.46] [10.38] [5.08] [12.27] [14.19] [8.89] [18.62] [20.54] [15.24] [26.24] [28.16] [22.86] [35.13] [37.05] [31.75] 159

164 DULOE Rectangular onnectors Thru-Hole onnectors Vertical Mount, 2 Row to 4 Row onnectors,.050 Spacing Position [1.47] 2 Plcs..038 [.97] Typ..040 [1.02] Typ..126 [3.20] L Receptacle.117 [2.97].24 [6.10] Product Facts Plastic or Metal Shell Standard Sizes: 9, 15, 25, 37, 51 and 65 ontact Tyco Electronics for custom configurations Suggested thru-hole layouts are available on the referenced drawings on the Tyco Electronics website.058 [1.47] 2 Plcs..205 [5.21].286 [7.26].126 [3.20].090 [2.29] Lead Length Typ. Plug ssembly Drawing Number [1.27] Typ..038 [.97] Typ..040 [1.02] Typ..020 [0.51] Typ. Plug ssembly, Vertical Mount, Through Hole, 2 to 4 Row,.050 Spacing, Plastic or Metal Position Size L.24 [6.10].223 [5.66].304 [7.72].090 [2.29] Lead Length Typ. Receptacle ssembly Drawing Number [0.51] Typ..050 [1.27] Typ. Receptacle ssembly, Vertical Mount, Size Dimensions Through Hole, 2 to 4 Row,.050 Spacing, Plastic or Metal L [5.82] [7.84] [2.54] [7.72] [9.74] [4.45] [10.90] [12.92] [7.62] [14.71] [16.73] [11.43] [19.15] [21.17] [15.88] [23.60] [25.62] [20.32] 160

165 DULOE Rectangular onnectors Part Numbering Guideline for Surface Mount and Thru-Hole onnectors DULOE onnectors - Surface Mount and Thru Hole Terminations S X X XXX XX(X) X X lass Threads/Jackscrew S Dualobe Threads (Receptacles Only) Jackscrews (Plugs Only) Rows N Thread for 1.0 mm Jackscrews M 1.0 mm Non aptive Jackscrews S 1 Row Q Thread for 1.2 mm Jackscrews N 1.0 mm aptive Jackscrews T 2 Row Q 1.2 mm aptive Jackscrews Type Mounting Hardware L LP (Plastic) 1.2 mm x.160 K 1.0 mm x.200 w/ 4 standoffs M Metal (l, Ni Plate) 1.0 mm x.200 w/ 2 standoffs L 1.2 mm x.200 w/ 2 standoffs D 1.2 mm x.160 w/ 2 standoffs P 1.2 mm x.200 w/ 4 standoffs Positions H 1.0 mm x.160 S 1.0 mm x.160 w/ 2 standoffs Position (single row only) I 1.2 mm x Position Position onfigurations Position 2 Plug, Horizontal SMT Position 4 Plug, Vertical SMT Position Position (two row only) 42 Plug, Vertical SMT,.020 Extended Leads 44 Plug, Vertical SMT,.040 Extended Leads 43 Plug, Vertical SMT,.020 Extended Leads, 2 side exit (single row only) 45 Plug, Vertical SMT,.040 Extended Leads, 2 side exit (single row only) L2 Receptacle, Horizontal SMT L4 Receptacle, Vertical SMT L42 Receptacle, Vertical SMT,.020 Extended Leads L44 Receptacle, Vertical SMT,.040 Extended Leads L43 Receptacle, Vertical SMT,.020 Extended Leads, 2 side exit (single row only) L45 Receptacle, Vertical SMT,.040 Extended Leads, 2 side exit (single row only) L8 Receptacle, Vertical SMT, w/ integrated standoffs (metal shell only) L82 Receptacle, Vertical SMT, w/ integrated standoffs,.020 Extended Leads (metal shell only) L84 Receptacle, Vertical SMT, w/ integrated standoffs,.040 Extended Leads (metal shell only) L83 Receptacle, Vertical SMT, w/ integrated standoffs,.020 Extended Leads (single row and metal shell only) L85 Receptacle, Vertical SMT, w/ integrated standoffs,.040 Extended Leads (single row and metal shell only) 5 Plug, Vertical Mount, Thru Hole 6 Plug, Horizontal Mount, Thru Hole M5 Receptacle, Vertical Mount, Thru Hole M6 Receptacle, Horizontal Mount, Thru Hole DULOE Rectangular onnectors 5 161

166 DULOE Rectangular onnectors Flex Termination Duckbill onnectors Two Row Product Facts Plastic or Metal Shell Standard Sizes: 9, 15, 25, 37, 51 and 65 ontact Tyco Electronics for custom configurations.075 [1.91] 2 Plcs [2.54] Typ. [0.25] Typ..205 [5.21].117 [2.97].086 [2.18] Typ. Jackscrews Omitted for larity.126 [3.20] Position [1.47] 2 Plcs. L.038 [.97] Typ..040 [1.02] Typ. Position Size Position [1.27] Typ..025 [0.64] Typ. E Max..017 [0.43] Flex Top View Size 15 shown for reference Position Size.086 [2.18] Typ. F.075 [1.91] 2 Plcs [2.54] Typ. [0.25] Typ..205 [5.21].117 [2.97].086 [2.18] Typ. Plug ssembly Drawing Number [3.20] Position [1.47] 2 Plcs. L.038 [.97] Typ..040 [1.02] Typ. Position Size Position [1.27] Typ..025 [0.64] Typ. E Max..017 [0.43] Flex Top View Size 15 shown for reference Position Size.086 [2.18] Typ. D Flex ottom View Plug ssembly, Two Ro Duckbill Lead Plastic or Met Typical Flex Pad Layout Size Dimensions D E L [3.81] [5.82] [ 7.84] [1.27] [0.95] [ 2.54] [5.72] [7.72] [ 9.74] [2.22] [1.90] [ 4.45] [8.89] [10.90] [12.92] [3.81] [3.49] [ 7.62] [12.7] [14.71] [16.73] [5.72] [5.40] [11.43] [17.1] [19.15] [21.17] [7.94] [7.62] [15.88] [21.6] [23.60] [25.62] [10.2] [9.84] [20.32] 162 Plug ssembly, Two Row Dualobe, Duckbill Leads, Plastic or Metal

167 DULOE Rectangular onnectors.223 [5.66].112 [2.84] 2 Plcs. Flex Termination Duckbill onnectors Two Row (ontinued).126 [3.20].223 [5.66] Position Size [1.47] [0.25] 2 Plcs. Typ..100 [2.54] Typ..086 [2.18] Typ. L.112 [2.84] 2 Plcs. Position [.97] Typ..040 [1.02] Typ. Receptacle ssembly Drawing Number [0.25] Typ..100 [2.54] Typ..086 [2.18] Typ..050 [1.27] Typ..017 [0.43] Max. E.025 [0.64] Typ. Flex Top View Size 15 shown for reference DULOE Rectangular onnectors 5 Position [2.18] Typ..058 [1.47] 2 Plcs. Size L Position [.97] Typ..040 [1.02] Typ..050 [1.27] Typ..017 [0.43] Max. E.025 [0.64] Typ. Flex Top View Size 15 shown for reference Position [2.18] Typ. D Flex ottom View Position Size Typical Flex Pad Layout Part Numbering Guideline for Flex Termination Duckbill onnectors DULOE onnectors - Duckbill Termination S T X XXX XX X lass Threads/Jackscrew S Dualobe Threads (Receptacles Only) Rows N Thread for 1.0 mm Jackscrews T 2 Row Q Thread for 1.2 mm Jackscrews Type onfiguration L LP (Plastic) P Plug M Metal (l, Ni Plate) S Receptacle Jackscrews (Plugs Only) M 1.0 mm Non aptive Jackscrews N 1.0 mm aptive Jackscrews Q 1.2 mm aptive Jackscrews Receptacle sse Duc Pla Positions Position Position Position Position Position Position Receptacle ssembly, Two Row Dualobe, Duckbill Leads, Termination ode Plastic or Metal Duckbill Termination Revised 7-05 millimeters unless otherwise reference purposes only. anada: Hong Kong:

168 DULOE Rectangular onnectors Solder up onnectors Single Row Product Facts Plastic or Metal Shell Standard Sizes: 5, 9, 15, 25, 37 and 51 ontact Tyco Electronics for custom configurations L.025 [.64] Pitch Type.038 [.97] Typ. Position [1.91] 2 Plcs..055 [1.40] Typ..205 [5.21].117 [2.97].043 [1.09] 2 Plcs. Position [2.18] L.025 [.64] Pitch Type.038 [.97] Typ. Plug ssembly Drawing Number Plug ssembly, Single Row Dualobe, [1.91] Typ. Solder up Termination, Plastic or Metal.223 [5.66] Position [2.84] 2 Plcs..086 [2.18] Position [1.09] 2 Plcs. Receptacle ssembly Drawing Number Receptacle ssembly, Single Row Dualo Solder up Termination, Plastic or Metal Size Dimensions L [5.92] [7.84] [2.54] [8.46] [10.38] [5.08] [12.27] [14.19] [8.89] [18.62] [20.54] [15.24] [26.24] [28.16] [22.86] [35.13] [37.05] [31.75] 164

169 DULOE Rectangular onnectors Plug Solder up onnectors Two Row L.025 [.64] Pitch Type.038 [.97] Typ..040 [1.02] Typ..075 [1.91] 2 Plcs..205 [5.21].0125 [0.32] Offset.055 [1.40] Typ..117 [2.97] DULOE Rectangular onnectors 5 Position 1 Product Facts Receptacle Plastic or Metal Shell Standard Sizes: 9, 15, 25, 37, 51 and 65 ontact Tyco Electronics for custom configurations.058 [1.47] 2 Plcs. Plug ssembly Drawing Number [3.20] Position Size.075 [1.91] Typ. L.025 Pitch Type [.64].040 [1.02] Typ Plug ssembly, [.32] Two Offset Row Dualobe, Solder up Termination, Plastic or Metal [.97] Typ..223 [5.66].112 [2.84] 2 Plcs. Position [1.47] 2 Plcs..126 [3.20] Position Size Receptacle ssembly Drawing Number Size Dimensions L Solder up Termination, Plastic or Metal [5.82] [7.84] [2.54] [7.72] [9.74] [4.45] [10.90] [12.92] [7.62] [14.71] [16.73] [11.43] [19.15] [21.17] [15.88] [23.60] [25.62] [20.32] 165

170 DULOE Rectangular onnectors Part Numbering Guideline for Solder up onnectors DULOE onnectors - Solder up Termination lass S Dualobe Rows S 1 Row T 2 Row Type L LP (Plastic) M Metal (l, Ni Plate) S X X XXX XX X Threads/Jackscrew Threads (Receptacles Only) N Thread for 1.0 mm Jackscrews Q Thread for 1.2 mm Jackscrews onfiguration P Plug S Receptacle Jackscrews (Plugs Only) M 1.0 mm Non aptive Jackscrews N 1.0 mm aptive Jackscrews Q 1.2 mm aptive Jackscrews Positions Position (single row only) Position Position Position Position Position Position (two row only) Termination ode Solder up Termination 166

171 DULOE Rectangular onnectors Product Facts Metal Shell Standard Sizes: 5, 9, 15, 25, 37 and 51 Factory wired to your specifications ontact Tyco Electronics for custom configurations Panel Mount onnectors Single Row, Flying Leads.223 [5.66].050 [1.27].062 [1.57] DULOE Rectangular onnectors [1.09] 4 Plcs..086 [2.18] 2 Plcs. L Position [.97] Typ..166 [4.22].083 [2.11] 2 Plcs. D Receptacle ssembly Drawing Number Receptacle ssembly, Panel Mount, Single Row Dualobe, Flying Leads, Metal Shell Size Dimensions D L [11.94] [5.92] [7.87] [15.75] [2.54] [14.48] [8.46] [10.41] [18.29] [5.08] [18.29] [12.27] [14.22] [22.10] [8.89] [24.64] [18.62] [20.57] [28.45] [15.24] [32.26] [26.24] [28.19] [36.07] [22.86] [14.15] [35.13] [37.08] [44.96] [31.75] 167

172 DULOE Rectangular onnectors Panel Mount onnectors Two Row, Flying Leads Receptacle.223 [5.66].050 [1.27].062 [1.57] Product Facts Metal Shell Standard Sizes: 9, 15, 25, 37, 51 and 65 ontact Tyco Electronics for custom configurations.063 [1.60] 2 Plcs. Position [.97] Typ..040 [1.02] Typ..058 [1.47] 2 Plcs..206 [5.23] L Position Size D Receptacle ssembly Drawing Number Receptacle ssembly, Panel Mount, Two Row Dualobe, Flying Leads, Metal Shell Size Dimensions D L [11.94] [5.82] [7.87] [15.75] [2.54] [13.84] [7.72] [9.78] [17.65] [4.45] [17.02] [10.90] [12.95] [20.83] [7.62] [20.83] [14.71] [16.76] [24.64] [11.43] [25.27] [19.15] [21.21] [29.08] [15.88] [20.72] [23.60] [25.65] [33.53] [20.32] 168

173 DULOE Rectangular onnectors Part Numbering Guideline for Panel Mount onnectors DULOE onnectors - Panel Mount P X M XXX S X XX XXX X lass Jackscrew Threads P Panel Mount Threads Rows N Thread for 1.0 mm Jackscrews S 1 Row Q Thread for 1.2 mm Jackscrews T 2 Row Type onductor Length M Metal (l, Ni Plate) XXX Three numbers only, length is in inches ( i.e. 012 = twelve inches) XX follwed by two numbers, length is in centimeters ( i.e. 06 = 6 centimeters) Positions MXX n M followed by two numbers, length is in meters ( i.e. M02 = 2 meters) Position (single row only) Position onductor Type Position DX White Teflon DM olor oded Teflon per MIL-STD Position DY White PTFE per M16878/6 DT White Tefzel per M22759/ Position Position D olor oded Teflon GX Teflon Ribbon able Position (two row only) onductor Size/Strands 0 28 WG Solid onfiguration 1 30 WG Solid S Receptacle 2 30 WG 7 Strand 3 32 WG 7 Strand 4 34 WG 7 Strand DULOE Rectangular onnectors

174 DULOE Rectangular onnectors Part Number Index ross Reference Nanonics Part Number Tyco Part Number Nanonics Part Number Tyco Part Number Nanonics Part Number Tyco Part Number Nanonics Part Number Tyco Part Number Wired onnectors SSL005P0D006N SSL005P0D012N SSL005P0DX012M SSL005P2D002N SSL005P2D SSL005P2D SSL005P2D006N SSL005P2D012N SSL005P2DX006N SSL005S0D006N SSL005S2D006N SSL005S2D012N SSL005S3DM024N SSL009P0D006N SSL009P0DMM03N SSL009P0DX012M SSL009P2D001N SSL009P2D SSL009P2D006N SSL009P2D009N SSL009P2D SSL009P2D012M SSL009P2D012N SSL009P2D012Q SSL009P2D018N SSL009P2D024N SSL009P2D03N SSL009P2D10N SSL009P2DM010N SSL009P2DM018M SSL009P2DM60Q SSL009S0DMM03N SSL009S2D SSL009S2D006N SSL009S2D SSL009S2D012Q SSL009S2DM006N SSL009S2GX SSL015P0D012N SSL015P0DMM03N SSL015P0DX012M SSL015P2D003N SSL015P2D006N SSL015P2D008N SSL015P2D SSL015P2D012M SSL015P2D012N SSL015P2D016N SSL015P2D SSL015P2D018N SSL015P2D SSL015P2D024M SSL015P2D024N SSL015P2D036N SSL015P2DM018M SSL015S0DMM03N SSL015S2D005N SSL015S2D006N SSL015S2D012N SSL015S2D024N SSL015S2D036N SSL025P0D012M SSL025P2D SSL025P2D006N SSL025P2D SSL025P2D018N SSL025P2D020N SSL025P2D024M SSL025P2D024N SSL025P2DM018M SSL025P2DX012Q SSL025P2GX006N SSL025S0D012N SSL025S2D SSL025S2D006N SSL025S2D012N SSL025S2D036N SSL037P2D012N SSL037P2D018N SSL037P2D024N SSL037P2D096N SSL037S2D012N SSL051P0DX012M SSL051P2D012N SSM005P0D024N SSM005P0D036N SSM005P0DX024N SSM005P2D SSM005P2D006N SSM005P2D012M SSM005P2D012N SSM005P2D012Q SSM005P2D018N SSM005P2D036N SSM005P2D040N SSM005P2D20N SSM005P2DT012N SSM005P2DX012N SSM005P2DX018N SSM005P2DX024N SSM005P4DX012N SSM005P4DXM SSM005S0D024N SSM005S0D036N SSM005S0DX024N SSM005S2D006N SSM005S2D012N SSM005S2D012Q SSM005S2D018N SSM005S2D040N SSM005S2DT012N SSM005S2DX024HN SSM005S4DX012N SSM009P0D012N SSM009P0D024N SSM009P0DM024N SSM009P0DX012N SSM009P2D SSM009P2D003N SSM009P2D SSM009P2D006N SSM009P2D010N SSM009P2D SSM009P2D012M SSM009P2D012N SSM009P2D SSM009P2D018N SSM009P2D SSM009P2D024N SSM009P2D036N SSM009P2D060N SSM009P2D084N SSM009P2D10N SSM009P2DM01N SSM009P2DM02N SSM009P2DM010N SSM009P2DM018N SSM009P2DM SSM009P2DM024N SSM009P2DT012N SSM009P2DT024N SSM009P2DX005N SSM009P2DX006N SSM009P2DX010N SSM009P2DX012N SSM009P2DX018N SSM009P2DX024N SSM009P2DY006N SSM009P3D018N SSM009S0D024N SSM009S1D SSM009S2D006HN SSM009S2D006N SSM009S2D012N SSM009S2D018N SSM009S2D024N SSM009S2D036N SSM009S2D060N SSM009S2D084N SSM009S2DM006N SSM009S2DM SSM009S2DT012N SSM009S2DX012N SSM009S2DX018N SSM009S2DX024HN SSM009S2DX036HN SSM015P0D012N SSM015P0D018N SSM015P0D024N SSM015P0DMM02N SSM015P2D003N SSM015P2D SSM015P2D006N SSM015P2D008N SSM015P2D SSM015P2D012M SSM015P2D012N SSM015P2D SSM015P2D018N SSM015P2D SSM015P2D024N SSM015P2D036N SSM015P2D048N SSM015P2D060N SSM015P2DM012N SSM015P2DM024N SSM015P2DM20N SSM015P2DM30N SSM015P2DMM02N SSM015P2DT012N SSM015P2DX006N SSM015P2DX006Q SSM015P2DX SSM015P2DX012N SSM015P2DX024N SSM015P2DY003N SSM015P2DY006N SSM015P2DY012N SSM015P2GX018N SSM015P4DX030N SSM015S0D012N SSM015S0D024N SSM015S2D003N SSM015S2D006N SSM015S2D012N SSM015S2D SSM015S2D018N SSM015S2D024N SSM015S2D036N SSM015S2D048N SSM015S2DM024N SSM015S2DT012N SSM015S2DX006N SSM015S2DX012HN SSM015S2DX018N SSM015S2DX024HN SSM015S2DY012N SSM015S2DY018N SSM015S4DX005N SSM025P0D024N SSM025P0D036N SSM025P2D003N SSM025P2D006Q SSM025P2D010N SSM025P2D SSM025P2D012N SSM025P2D012Q

175 DULOE Rectangular onnectors Nanonics Tyco Part Number Part Number SSM025P2D SSM025P2D018N SSM025P2D024N SSM025P2D025N SSM025P2D030N SSM025P2D036N SSM025P2D30N SSM025P2D50N SSM025P2DM018Q SSM025P2DM024N SSM025P2DT012N SSM025P2DX006N SSM025P2DX012N SSM025P2DX018N SSM025P2DX024N SSM025P2GX SSM025P2GX018N SSM025P3DY006N SSM025P4DX015N SSM025S0D024N SSM025S0D036N SSM025S2D006N SSM025S2D012N SSM025S2D SSM025S2D024N SSM025S2DT012N SSM025S2DX006N SSM025S2DX018N SSM025S2DX024HN SSM025S2DX024N SSM025S3DY006N SSM037P0D006M SSM037P0D009Q SSM037P0D024N SSM037P0D036N SSM037P2D SSM037P2D006N SSM037P2D SSM037P2D012N SSM037P2D012Q SSM037P2D015N SSM037P2D SSM037P2D018M SSM037P2D018N SSM037P2D024N SSM037P2DM01N SSM037P2DM024N SSM037P2DT012N SSM037P2DT30N SSM037P2DX012Q SSM037P2DX018N SSM037P2GX30N SSM037P4DX018N SSM037S0D024N SSM037S0D036N SSM037S2D SSM037S2D018N Part Number Index ross Reference (ontinued) Nanonics Tyco Nanonics Tyco Part Number Part Number Part Number Part Number SSM037S2D024N STL009P3DX030N SSM037S2DT012N STL009S0D006N SSM037S2DT30N STL009S0D012N SSM051P0D024N STL009S0D030N SSM051P2D STL009S2D SSM051P2D006N STL009S2D012N SSM051P2D012N STL009S2D018N SSM051P2D STL009S2D036N SSM051P2D STL009S2DM036N SSM051P2D024N STL009S3DX024N SSM051P2D030N STL015P0D006N SSM051P2D06Q STL015P0D012Q SSM051P2D30N STL015P0DMM03N SSM051P2DM012Q STL015P1DN50N SSM051P2DM018N STL015P2D SSM051P2DM024N STL015P2D SSM051P2DM10N STL015P2D010N SSM051P2DM30N STL015P2D SSM051P2DN06Q STL015P2D012N SSM051P2DN15Q STL015P2D015N SSM051P2DT012N STL015P2D015Q SSM051P2DT018N STL015P2D018M SSM051P2DX STL015P2D018N SSM051P2DX012Q STL015P2D030N SSM051P2DXM05Q STL015P2D036N SSM051P2DY012N STL015P2D10N SSM051P2GX012N STL015P2DM010N SSM051S0D024N STL015P2DM048N SSM051S2D STL015P2DN50N SSM051S2D018N STL015P2DX006N SSM051S2DN15Q STL015P2DX010N SSM051S2DT012N STL015P2DX036N SSM051S2DT018N STL015P2DY006N SSM051S2DT STL015P2GX040N SSM051S2GX012N STL015S0DMM03N STL009P0D006N STL015S2D005N STL009P0D STL015S2D STL009P0D036N STL015S2D008N STL009P0DM024N STL015S2D012N STL009P1DM024N STL015S2D018N STL009P2D STL015S2D030N STL009P2D012M STL015S2D036N STL009P2D012N STL015S2DX010N STL009P2D STL015S3DX024N STL009P2D018M STL025P0D006N STL009P2D018N STL025P0D012N STL009P2D STL025P2D STL009P2D036N STL025P2D006M STL009P2DM01N STL025P2D006N STL009P2DM02N STL025P2D010N STL009P2DM010N STL025P2D STL009P2DM024N STL025P2D012N STL009P2DM030N STL025P2D015N STL009P2DM048N STL025P2D015Q STL009P2DX024N STL025P2D STL009P2GX010N STL025P2D018M STL009P3DX024N STL025P2D018N Nanonics Tyco Part Number Part Number STL025P2D018Q STL025P2D020N STL025P2D030N STL025P2DM010N STL025P2DT024N STL025P2DY006N STL025P2GX STL025P3DX006N STL025P3DX030N STL025P4DX030N STL025S2D001N STL025S2D006N STL025S2D012N STL025S2D030N STL025S2D036N STL025S3D004N STL025S3DX030N STL037P2D010N STL037P2D STL037P2D012M STL037P2D012N STL037P2D012Q STL037P2D017N STL037P2D018M STL037P2D018N STL037P2D018Q STL037P2D020Q STL037P2D024N STL037P2D036M STL037P2D036N STL037P2D040N STL037P2D15N STL037P2DM010N STL037P2DM048N STL037P2DT024N STL037P2DY006N STL037P2DY020N STL037P2GX005N STL037P3D STL037S2D012N STL037S2D012Q STL037S2D030N STL037S2D036N STL037S2D15N STL037S3D001N STL037S3DX024N STL051P0DX50N STL051P2D003N STL051P2D006N STL051P2D STL051P2D012N STL051P2D STL051P2D018N STL051P2D018Q STL051P2D024N STL051P2D036N STL051P2D040N DULOE Rectangular onnectors 5 171

176 DULOE Rectangular onnectors Part Number Index ross Reference (ontinued) Nanonics Part Number Tyco Part Number Nanonics Part Number Tyco Part Number Nanonics Part Number Tyco Part Number Nanonics Part Number Tyco Part Number STL051P2D35N STL051P2DM048N STL051P2DN STL051P2DT024N STL051S2D003N STL051S2D012N STL051S2D018N STL051S2D024N STL051S2D036N STL051S2D STL051S2DX STL065P0D006N STL065P0D012N STL065P0D036N STL065P0D036Q STL065P2D STL065P2D006M STL065P2D006N STL065P2D012N STL065P2D STL065P2D018N STL065P2D018Q STL065P2D024N STL065P2D036N STL065P2D040N STL065P2D072N STL065P2D10N STL065P2DM018N STL065P2DM036N STL065P2DT024N STL065P2DT10N STL065P2GX036Q STL065P3DM072N STL065S2D006N STL065S2D012N STL065S2D048N STL065S2DM036N STL065S3DM072N STM009P0D020N STM009P0DM024N STM009P0DX10N STM009P2D003N STM009P2D004N STM009P2D STM009P2D006N STM009P2D STM009P2D012M STM009P2D012N STM009P2D016N STM009P2D018N STM009P2D STM009P2D020Q STM009P2D STM009P2D024N STM009P2D024Q STM009P2D028N STM009P2D030N STM009P2D STM009P2D036M STM009P2D036N STM009P2D060N STM009P2D060Q STM009P2D10Q STM009P2D30N STM009P2D40N STM009P2D46N STM009P2D50N STM009P2D90Q STM009P2DM01N STM009P2DM02N STM009P2DM012N STM009P2DM012Q STM009P2DM018N STM009P2DM036N STM009P2DN036M STM009P2DT006Q STM009P2DT012N STM009P2DT018N STM009P2DT030N STM009P2DT036N STM009P2DT45N STM009P2DX006Q STM009P2DX010N STM009P2DX012N STM009P2DX024N STM009P2DX15Q STM009P2DXM01Q STM009P2DY030N STM009P2GX STM009P2GX006N STM009P2GX012N STM009P3DM024Q STM009S0DX012N STM009S2D003N STM009S2D STM009S2D006HN STM009S2D006N STM009S2D012HN STM009S2D012N STM009S2D012Q STM009S2D018HM STM009S2D018HN STM009S2D018N STM009S2D024N STM009S2D024Q STM009S2D036HN STM009S2D036N STM009S2D048N STM009S2D060Q STM009S2D46N STM009S2DM01HN STM009S2DM01N STM009S2DM02N STM009S2DM012HN STM009S2DM012Q STM009S2DM018HN STM009S2DM036N STM009S2DT012HN STM009S2DT012N STM009S2DT030N STM009S2DX010N STM009S2DX012HN STM009S2DX012N STM009S2DX15Q STM009S2DXM01Q STM015P0D036N STM015P0DM02Q STM015P0DM012N STM015P0DM024N STM015P2D003N STM015P2D005N STM015P2D006N STM015P2D012N STM015P2D012Q STM015P2D016N STM015P2D018N STM015P2D020Q STM015P2D024N STM015P2D030N STM015P2D STM015P2D036M STM015P2D036N STM015P2D048N STM015P2D060Q STM015P2D120N STM015P2D10Q STM015P2D30N STM015P2D90Q STM015P2DM01N STM015P2DM018N STM015P2DM020N STM015P2DM024N STM015P2DM036N STM015P2DMM01N STM015P2DT006Q STM015P2DT012N STM015P2DT030N STM015P2DT036N STM015P2DT15N STM015P2DT22Q STM015P2DT45N STM015P2DT95Q STM015P2DX005Q STM015P2DX010N STM015P2DX012N STM015P2DX024N STM015P2DX030N STM015P2DX048N STM015P2DX072N STM015P2DX15Q STM015P2GX004N STM015P3DM024Q STM015P3DX024N STM015P4DX012N STM015P4DX024N STM015S0D012DQ STM015S0D036N STM015S0DM036N STM015S0DX10N STM015S0DX10Q STM015S2D003N STM015S2D004HN STM015S2D006N STM015S2D008HN STM015S2D008Q STM015S2D012HN STM015S2D012N STM015S2D015Q STM015S2D016N STM015S2D018N STM015S2D024N STM015S2D036N STM015S2D036Q STM015S2D060Q STM015S2D30N STM015S2D50N STM015S2DM01HN STM015S2DM006N STM015S2DM010N STM015S2DM012HN STM015S2DM024N STM015S2DM036N STM015S2DMM01N STM015S2DT006Q STM015S2DT012HN STM015S2DT012N STM015S2DT030N STM015S2DT90Q STM015S2DX005HN STM015S2DX006HN STM015S2DX010N STM015S2DX012N STM015S2DX018HN STM015S2DX15Q STM015S4DX012Q STM015S4DX030N STM015S4DX20N STM025P0D012N STM025P0D036N STM025P0D060N STM025P0DM012N STM025P0DM024N STM025P0DM036N STM025P2D STM025P2D003N STM025P2D STM025P2D STM025P2D006N

177 DULOE Rectangular onnectors Nanonics Tyco Part Number Part Number STM025P2D006Q STM025P2D008N STM025P2D010N STM025P2D010Q STM025P2D STM025P2D012N STM025P2D015N STM025P2D016N STM025P2D018N STM025P2D020N STM025P2D020Q STM025P2D024N STM025P2D024Q STM025P2D030N STM025P2D036M STM025P2D036N STM025P2D048N STM025P2D060N STM025P2D060Q STM025P2D072N STM025P2D084N STM025P2D120N STM025P2D180N STM025P2D10Q STM025P2D40N STM025P2D46N STM025P2D50N STM025P2D60N STM025P2DM006Q STM025P2DM012N STM025P2DM012Q STM025P2DM018N STM025P2DM020N STM025P2DM024N STM025P2DM036N STM025P2DM072Q STM025P2DT006N STM025P2DT012M STM025P2DT012N STM025P2DT024N STM025P2DT030N STM025P2DT036Q STM025P2DT048Q STM025P2DT084N STM025P2DX STM025P2DX006N STM025P2DX006Q STM025P2DX010N STM025P2DX012N STM025P2DX018N STM025P2DX048N STM025P2DX072N STM025P2DY STM025P2DY STM025P2DY006N STM025P3DM024Q STM025P3DX030N Part Number Index ross Reference (ontinued) Nanonics Tyco Nanonics Tyco Part Number Part Number Part Number Part Number STM025P4DX012M STM037P2D012Q STM025P4DX012N STM037P2D015N STM025S0D036N STM037P2D015Q STM025S0DM036N STM037P2D STM025S2D STM037P2D018N STM025S2D STM037P2D020N STM025S2D006N STM037P2D020Q STM025S2D008N STM037P2D STM025S2D012HN STM037P2D024N STM025S2D012N STM037P2D024Q STM025S2D016N STM037P2D030N STM025S2D018N STM037P2D STM025S2D020N STM037P2D036N STM025S2D024N STM037P2D036Q STM025S2D036N STM037P2D048N STM025S2D040N STM037P2D060Q STM025S2D048HN STM037P2D072N STM025S2D048N STM037P2D20Q STM025S2D060HN STM037P2D50N STM025S2D060Q STM037P2D50Q STM025S2D084N STM037P2DM01Q STM025S2D180N STM037P2DM012N STM025S2D46Q STM037P2DM018N STM025S2D60N STM037P2DM020N STM025S2DM010N STM037P2DM024M STM025S2DM012HN STM037P2DM024N STM025S2DM024N STM037P2DM STM025S2DM036N STM037P2DM036Q STM025S2DT012HN STM037P2DT006N STM025S2DT012N STM037P2DT012M STM025S2DT030N STM037P2DT012N STM025S2DX005HN STM037P2DT030N STM025S2DX006N STM037P2DT036N STM025S2DX010N STM037P2DT036Q STM025S2DX012N STM037P2DT20Q STM025S2DX018N STM037P2DX006N STM025S2DY018N STM037P2DX010N STM025S3D012N STM037P2DX012N STM025S3DM20DQ STM037P2DX024N STM025S3DX030N STM037P2GX006N STM025S4DX030N STM037P3D012N STM037P0D009N STM037P3DM024Q STM037P0D009Q STM037S0D036N STM037P0D036N STM037S0DM036N STM037P0DM024N STM037S0DM060N STM037P0DM036N STM037S0DX10N STM037P0DM060N STM037S2D006N STM037P0DX10N STM037S2D006Q STM037P2D001N STM037S2D012HN STM037P2D003N STM037S2D012N STM037P2D005N STM037S2D012Q STM037P2D006M STM037S2D015N STM037P2D006N STM037S2D015Q STM037P2D010Q STM037S2D018HN STM037P2D STM037S2D018N STM037P2D012M STM037S2D020Q STM037P2D012N STM037S2D024N Nanonics Tyco Part Number Part Number STM037S2D036N STM037S2D060Q STM037S2DM010N STM037S2DM024N STM037S2DM036Q STM037S2DT008N STM037S2DT012N STM037S2DT020Q STM037S2DT030N STM037S2DT20Q STM037S2DX006N STM037S2DX010N STM037S2DX012N STM037S2GX006N STM051P0D012N STM051P0D036N STM051P0D048N STM051P0DM036N STM051P0DM060N STM051P0DX10N STM051P1DX STM051P2D003N STM051P2D STM051P2D006N STM051P2D012N STM051P2D012Q STM051P2D015N STM051P2D015Q STM051P2D016N STM051P2D STM051P2D018N STM051P2D018Q STM051P2D STM051P2D024N STM051P2D030N STM051P2D036N STM051P2D036Q STM051P2D060N STM051P2D060Q STM051P2D20N STM051P2D30N STM051P2D50N STM051P2D50Q STM051P2DM018N STM051P2DM024N STM051P2DMM01N STM051P2DT012N STM051P2DT018N STM051P2DT030N STM051P2DT036N STM051P2DT036Q STM051P2DT072N STM051P2DX012N STM051P2DX012Q STM051P2DX015N STM051P2DX STM051P2DX018N DULOE Rectangular onnectors 5 173

178 DULOE Rectangular onnectors Part Number Index ross Reference (ontinued) Nanonics Part Number Tyco Part Number Nanonics Part Number Tyco Part Number Nanonics Part Number Tyco Part Number Nanonics Part Number Tyco Part Number STM051P2DY015N STM051P2GX006N STM051P2GX012N STM051P2GXM01N STM051S0D036N STM051S0DX10N STM051S1DX STM051S2D003N STM051S2D STM051S2D006N STM051S2D008Q STM051S2D012N STM051S2D015HN STM051S2D015N STM051S2D016N STM051S2D018HN STM051S2D018N STM051S2D018Q STM051S2D036N STM051S2D036Q STM051S2D060N STM051S2D060Q STM051S2DM012N STM051S2DM024N STM051S2DMM01N STM051S2DT012N STM051S2DT018N STM051S2DT030N STM051S2DX012N STM051S2DX015N STM065P0D036N STM065P0DM036N STM065P0DM060N STM065P0DM30Q STM065P0DMM01Q STM065P2D003N STM065P2D STM065P2D006N STM065P2D008Q STM065P2D012N STM065P2D012Q STM065P2D016M STM065P2D016N STM065P2D018M STM065P2D018N STM065P2D018Q STM065P2D020N STM065P2D024N STM065P2D024Q STM065P2D030N STM065P2D STM065P2D036N STM065P2D072N STM065P2D50N STM065P2DM01N STM065P2DM01Q STM065P2DM018N STM065P2DM024N STM065P2DM036N STM065P2DM46N STM065P2DT012N STM065P2DT018N STM065P2DT030N STM065P2DT10N STM065P2DX006N STM065P2DX018N STM065P2DX036N STM065P2DY012N STM065P2DY012Q STM065P2DY024N STM065P2GXM01N STM065P3DM006N STM065P3DX024N STM065S0D036N STM065S2D003N STM065S2D STM065S2D006N STM065S2D008Q STM065S2D012N STM065S2D012Q STM065S2D015N STM065S2D STM065S2D018N STM065S2D018Q STM065S2D024N STM065S2D024Q STM065S2D STM065S2D036HN STM065S2D036N STM065S2D036Q STM065S2DM024N STM065S2DT012N STM065S2DT018N STM065S2DT030N Jumper ssemblies JSL005PP2D002N JSL009PP2D006N JSL009PP2DX003N JSL009PP2DX006N JSL009PR2D012N JSL009RR2DX0.5N JSL015PD2DX002N JSL015PP2DX001N JSL015PP2DX006N JSL025PP2D012N JSL037PD2GX02N JSL037PR2DX002N JSL037PR2DX003N JSL051PD2GX10N JSL051PD2GX17N JSL051PD2GX22N JSL051PD2GX30N JSL051PD2GX75N JSL051PD2GX80N JSL051PP2D004N JSL051PP2GX10N JSL051PP2GX15N JSL051PP2GX17N JSL051PP2GX22N JSL051PP2GX75N JSL051PP2GX80N JSL051PR2GX JSM005PP2D002N JSM005PP2D003N JSM005PP2D005N JSM005PP2D JSM005PP2D02.5N JSM005PP2D JSM005PP2DT150N JSM009PP2D002N JSM009PP2D003N JSM009PP2D006N JSM009PP2D024N JSM009PP2DM005Q JSM009PR2D002N JSM009PR2D006N JSM015PD2D02N JSM015PD2GX05N JSM015PP2D004N JSM015PP2D006N JSM015PP2GX001N JSM015PP2GX002N JSM015PP2GX006N JSM015PP2GX014N JSM015PP2GX018N JSM015PR2D001N JSM015PR2D002N JSM015PR2D003N JSM015PR2D004N JSM015PR2D006N JSM015PR2DX003N JSM025PP2D006N JSM025PP2DX004N JSM025PP2DX008N JSM025PP2DX17N JSM025PP2GX003N JSM025PP2GX024N JSM025PP4DX20N JSM025PR2D006N JSM025PR2D1.5N JSM025PR2GX002N JSM025RR2D006N JSM037PD2GX02N JSM037PD2GX05N JSM037PD2GX10N JSM037PP2D06Q JSM037PP2D08Q JSM037PP2DX018N JSM037PP2GX072N JSM037PR2DT03N JSM051PD2GX10N JSM051PD2GX JSM051PD2GX12N JSM051PD2GX15N JSM051PD2GX17N JSM051PD2GX50N JSM051PP2D12Q JSM051PP2GX JSM051PP2GX12N JSM051PP2GX17N JSM051PP2GX22N JSM051PP2GX50N JSM051PP2GX75N JSM051PP2GX80N JSM051PR2D1.5N JSM051PR2GX002N JTL009PD2GX006N JTL009PD2GX012N JTL009PD2GX018N JTL009PP2D012N JTL009PP2DX006N JTL009PR2D018N JTL015PP2DX002N JTL015PP2DX006N JTL015PP2DX008M JTL015PP2DX014N JTL015PR0D011N JTL015PR2DX JTL025PD2D010N JTL025PD2D1.25N JTL025PP2D001M JTL025PP2D001N JTL025PP2D036N JTL025PP2D05N JTL025PP2D07N JTL025PP2DX002N JTL025PP2DX003N JTL025PP2DX010N

179 DULOE Rectangular onnectors Nanonics Tyco Part Number Part Number JTL025PR0D007N JTL025PR2DM31N JTL037PP2D012N JTL037PP2D024N JTL037PP2D07.5N JTL037PP2D08.5N JTL037PP2D09.5N JTL037PP2DM006N JTL037PP2DX002N JTL037PP2DX003N JTL037PP2DX006N JTL037PP2DX JTL037PP2DX012N JTL037PR2D012N JTL037PR2D024N JTL037PR2DT024N JTL037PR2DX JTL051PP2D009N JTL051PP2DX002N JTL051PP2DX006N JTL051PP2DX010N JTL051PP2DX024N JTL051PR2D012N JTL051PR2D JTL065PP2D005N JTL065PP2D006N JTL065PP2D012N JTL065PP2D05N JTL065PP2DX012N JTL065PR2DX002N JTM009PD2DX003N JTM009PD2DX006N JTM009PP2D006N JTM009PP2D012N JTM009PP2D02.5N JTM009PP2DM004N JTM009PP2DT002N JTM009PP2DT004N JTM009PP2DX006N JTM009PR2D003Q JTM009PR2D50N JTM009PR2DT002M JTM009PR2DX001N JTM015PD2DX006N JTM015PD2GX006N JTM015PD2GX012N JTM015PP2D006M JTM015PP2D012M JTM015PP2D02.5N JTM015PP2D05.5N JTM015PP2DT004N JTM015PP2DX001N JTM015PP2DX005Q JTM015PP2DX006N JTM015PP2DX009N JTM015PP2DX024N JTM015PP2DY003N Part Number Index ross Reference (ontinued) Nanonics Tyco Nanonics Tyco Part Number Part Number Part Number Part Number JTM015PP2DY011N JTM037PP2DX006Q JTM015PP2DY022N JTM037PP2DX009Q JTM015PR2D002N JTM037PP2DX010Q JTM015PR2D003Q JTM037PP2DX JTM015PR2D012M JTM037PP2DX024N JTM015PR2DT001N JTM037PP2DX3.5N JTM015PR2DT002M JTM037PR0D036M JTM015PR2DX001N JTM037PR2D003Q JTM015PR2DX003N JTM037PR2D005N JTM015RR2D012N JTM037PR2D16Q JTM025PD2GX002N JTM037PR2DT001N JTM025PP2D001N JTM037PR2DT002M JTM025PP2D012N JTM037PR2DX JTM025PP2D018N JTM037PR2DX001N JTM025PP2D024N JTM037PR2DX001Q JTM025PP2D030N JTM037PR2DX006Q JTM025PP2D035N JTM037PR2GX JTM025PP2D2.75N JTM037PR2GX003N JTM025PP2DM024M JTM051PD2D002N JTM025PP2DX001N JTM051PD2DT004N JTM025PP2DX012N JTM051PD2DX10N JTM025PP2DX018N JTM051PP2D001N JTM025PP2DX022N JTM051PP2D004N JTM025PP2DX03.8M JTM051PP2D2.5N JTM025PP2DX03.8N JTM051PP2DT JTM025PP2DX040N JTM051PP2DX001N JTM025PP2DY JTM051PP2DX004N JTM025PP2DY006N JTM051PP2DX009Q JTM025PP2DY020N JTM051PP2DX012N JTM025PP2DY024N JTM051PP2DX036N JTM025PR0DX20N JTM051PP2DX040N JTM025PR0DX30N JTM051PP2DX2.5N JTM025PR2D003Q JTM051PP2DX4.5N JTM025PR2DT001N JTM051PR0D036N JTM025PR2DT002M JTM051PR2D002N JTM025PR2DT240N JTM051PR2D003Q JTM025PR2DX0.5N JTM051PR2D JTM025PR2DX001N JTM051PR2D006Q JTM025PR2DX003N JTM051PR2D018N JTM025PR2DX006Q JTM051PR2DT001N JTM025PR2DX012N JTM051PR2DX002N JTM025PR2DX JTM051PR2GX JTM037PD2D002N JTM051PR2GX006Q JTM037PD2D004N JTM051RR2D JTM037PD2GX012N JTM065PD2GX022N JTM037PD2GX024N JTM065PP2D004N JTM037PP0DM JTM065PP2DM10Q JTM037PP0DM006N JTM065PP2DX002N JTM037PP2D018N JTM065PP2DX004N JTM037PP2D024N JTM065PP2DX006N JTM037PP2D036N JTM065PP2DX007N JTM037PP2D041N JTM065PR2D001N JTM037PP2DX001.75N JTM065PR2D JTM037PP2DX001N JTM065PR2D003N JTM037PP2DX002N JTM065PR2DX001N JTM037PP2DX002Q JTM065PR2DX004N JTM037PP2DX004N JTM065PR2DX004Q Nanonics Part Number Tyco Part Number JTM065PR2GX001N JTM065RR2D Surface Mount SSL005L2N SSL005L2HN SSL0092H SSL009L2N SSL009L2Q SSL009L2HN SSL009L42HN SSL009L43KN SSL009L4N SSL009L4KN SSL015L2N SSL015L2Q SSL015L2N SSL015L2H SSL015L2HN SSL015L4N SSL015L4PQ SSL SSL025L23N SSL025L2N SSL025L2HN SSL025L SSL0372H SSL0372N SSL037L2HN SSL037L43KN SSL SSL051L2N SSL051L2HN SSM005L2HN SSM005L2N SSM005L82HN SSM005L84HN SSM005L85HN SSM0092H SSM0092N SSM009L SSM009L2N SSM009L2Q SSM009L2HN SSM009L2N SSM009L2SN SSM009L42KN SSM009L44KN SSM009L44N SSM009L4Q SSM009L4KN SSM009L85HN SSM0152N SSM01545H SSM015H SSM015L2N SSM015L2Q DULOE Rectangular onnectors 5 175

180 DULOE Rectangular onnectors Part Number Index ross Reference (ontinued) Nanonics Part Number Tyco Part Number Nanonics Part Number Tyco Part Number Nanonics Part Number Tyco Part Number Nanonics Part Number Tyco Part Number SSM015L2N SSM015L2HN SSM015L2N SSM015L2SN SSM015L44KN SSM015L4KN SSM015L4PQ SSM015L82HN SSM015L84HN SSM015L85HN SSM0252H SSM02544N SSM02545K SSM025L23N SSM025L2N SSM025L2Q SSM025L2GQ SSM025L2HN SSM025L2N SSM025L2SN SSM025L42HN SSM025L44HN SSM025L44KN SSM025L44SN SSM025L45KN SSM025L4HN SSM025L4KN SSM025L4PQ SSM025L4SN SSM SSM0372H SSM0372N SSM037L2Q SSM037L2HN SSM037L2IQ SSM037L42IQ SSM037L42KN SSM037L4KN SSM037L82Q SSM037L84KN SSM037L85PQ SSM0512H SSM051L2Q SSM051L2GQ SSM051L2HN SSM051L2IQ SSM051L42KN SSM051L44KN SSM051L4KN STL009L23N STL009L2Q STL009L2H STL009L2HN STL009L423N STL009L42N STL009L42HN STL009L42KN STL009L44KN STL009L4KN STL009L4N STL0152N STL01544N STL015L23N STL015L2N STL015L2Q STL015L2N STL015L2HN STL015L2HQ STL015L2N STL015L423N STL015L42KN STL015L44KN STL015L44N STL015L4Q STL015L4HN STL015L4KN STL STL0252N STL02544M STL025L2N STL025L2Q STL025L2N STL025L2HN STL025L2HQ STL025L2JN STL025L42KN STL025L44KN STL025L44N STL025L4HN STL025L4KN STL025L4PQ STL0372M STL STL037L23N STL037L2N STL037L2Q STL037L2HN STL037L2JN STL037L2KN STL037L2N STL037L42KN STL037L44KN STL037L4HN STL051L2N STL051L2Q STL051L2N STL051L2HN STL051L42KN STL051L4HN STL051L4KN STL051L4PQ STL065L2Q STL065L2HN STL065L2N STL065L42KN STL065L44N STL065L4Q STL065L4KN STL065T STM0092N STM00942N STM00944Q STM009H2N STM009L23N STM009L2N STM009L2Q STM009L2N STM009L2HN STM009L2N STM009L2SN STM009L42N STM009L42HN STM009L42KN STM009L44HN STM009L44PQ STM009L44Q STM009L4Q STM009L4KN STM009L4PQ STM009L84HN STM009L8HN STM0152N STM01542N STM015H2N STM015H5Q STM015L23N STM015L2Q STM015L2N STM015L2HN STM015L2HQ STM015L2LQ STM015L2N STM015L2SN STM015L42KN STM015L44Q STM015L44HN STM015L44KN STM015L44Q STM015L4HN STM015L4KN STM015L4PQ STM015L4SN STM015L82N STM015L82HN STM015L82IQ STM015L82LQ STM015L84Q STM015L84N STM015L84HN STM015L84IQ STM015L84KN STM015L8HN STM0252N STM02542N STM STM02544N STM02544Q STM025H2N STM025H44N STM025H5N STM025H5Q STM025L2N STM025L2Q STM025L2N STM025L2HN STM025L2HQ STM025L2IQ STM025L2JN STM025L2N STM025L42N STM025L42KN STM025L44HM STM025L44HN STM025L44KN STM025L44N STM025L44PQ STM025L44Q STM025L4N STM025L4KN STM025L4LQ STM025L4PN STM025L4PQ STM025L4SN STM025L82N STM025L82HN STM025L84N STM025L84KN STM025L8HN STM0372H STM0372M STM0372N STM STM03742N STM03742Q STM0374N STM037H2N STM037L23N STM037L2N STM037L2Q STM037L2N STM037L2HN STM037L2IQ STM037L2KN STM037L2N STM037L2SN STM037L2TQ STM037L42Q STM037L42HN

181 DULOE Rectangular onnectors Nanonics Part Number Tyco Part Number STM037L42K STM037L42KN STM037L42PQ STM037L44DQ STM037L44KN STM037L44N STM037L44PQ STM037L44Q STM037L44SN STM037L4N STM037L4HN STM037L4KN STM037L4PQ STM037L4SN STM037L82Q STM037L82HN STM037L82PQ STM037L84Q STM037L84HN STM037L84N STM037L84PQ STM037L84SN STM037L8HN STM0512H STM0512N STM0512Q STM05142N STM0514N STM051H STM051L23N STM051L2Q STM051L2N STM051L2HN STM051L2HQ STM051L2IQ STM051L2JN STM051L2Q STM051L2SN STM051L2TQ STM051L42HN STM051L42KN STM051L42N STM051L44HN STM051L44KN STM051L44PQ STM051L44Q STM051L4N STM051L4HN STM051L4KN STM051L4PQ STM051L4SN STM051L82Q STM051L82HN STM051L82IQ STM051L82LQ STM051L84HN STM051L8HN Part Number Index ross Reference (ontinued) Nanonics Part Number Tyco Part Number STM0652H STM0652N STM0652Q STM06542N STM06542Q STM STM06544N STM06544Q STM0654Q STM065L23N STM065L2Q STM065L2N STM065L2HN STM065L2IQ STM065L2JN STM065L2KN STM065L42HN STM065L42KN STM065L42N STM065L4KN STM065L82Q STM065L82HN STM065L82IQ STM065L82LQ STM065L84HN STM065L84IQ STM065L84N STM065L8HN Through-Hole SSL005M6SN SSL009M5N SSL009M SSL009M6N SSL009M6D SSL009M6H SSL009M6SN SSL015M5KN SSL015M SSL015M6N SSL015M6D SSL015M6N SSL015M6SN SSL025M5N SSL025M SSL025M6N SSL025M6D SSL025M6DQ SSL025M6H SSL025M6HN SSL025M6SQ SSL037M5N SSL037M6SN SSM005M6SN SSM0095Q SSM0096Q SSM009M5N SSM009M5HN Nanonics Part Number Tyco Part Number SSM009M5LQ SSM009M6Q SSM009M6N SSM009M6DQ SSM009M6HN SSM009M6SN SSM0155N SSM0156N SSM015M5N SSM015M5LQ SSM015M6HN SSM015M6SN SSM0256Q SSM025M5N SSM025M5HN SSM025M5LQ SSM025M5N SSM025M6Q SSM025M6DQ SSM025M6HN SSM025M6SN SSM0375Q SSM0376N SSM037M6HN SSM037M6HQ SSM037M6SN SSM0515N SSM051M5N SSM051M6N SSM051M6SN STL009M5N STL009M5KN STL009M5L STL009M6N STL009M6HN STL0155N STL015M5N STL015M5KN STL015M5SN STL015M6N STL015M6HN STL015M6KN STL015M6SN STL0255N STL0256N STL025M STL025M5N STL025M5KN STL025M STL025M6D STL025M6DQ STL025M6HN STL025M6KN STL025M6N STL025M6SN STL037M5N STL037M5LQ Nanonics Part Number Tyco Part Number STL037M5Q STL037M6HN STL037M6SN STL051M5N STL051M5KN STL051M STL051M6N STL051M6HN STL051M6IN STL051M6SN STL065M5KN STL065M6HN STL065M6SN STM0095N STM0095Q STM0096N STM009M5Q STM009M5N STM009M5DQ STM009M5HN STM009M5LQ STM009M5PQ STM009M5Q STM009M6N STM009M6Q STM009M6N STM009M6DQ STM009M6HN STM009M6IQ STM009M6SN STM0155N STM0156N STM015M5N STM015M5Q STM015M5N STM015M5HN STM015M5KN STM015M5LN STM015M5LQ STM015M5PQ STM015M5SN STM015M6N STM015M6N STM015M6DQ STM015M6HN STM015M6IQ STM015M6N STM015M6S STM015M6SN STM015M9N STM015M9HN STM0255N STM0255Q STM0256N STM025M5Q STM025M5N STM025M5HN STM025M5LQ DULOE Rectangular onnectors 5

182 DULOE Rectangular onnectors Part Number Index ross Reference (ontinued) Nanonics Part Number Tyco Part Number Nanonics Part Number Tyco Part Number Nanonics Part Number Tyco Part Number Nanonics Part Number Tyco Part Number STM025M5PQ STM025M5SN STM025M6N STM025M6N STM025M6DQ STM025M6HN STM025M6IQ STM025M6N STM025M6Q STM025M6SN STM025M9N STM025M9HN STM STM0375N STM0375Q STM0376N STM0376Q STM037M5N STM037M5Q STM037M5N STM037M5HN STM037M5N STM037M5PQ STM037M5SN STM037M6N STM037M6Q STM037M6N STM037M6DN STM037M6DQ STM037M6HN STM037M6IQ STM037M6SN STM037M6SQ STM STM0515N STM0515Q STM0516N STM051M5Q STM051M5N STM051M5DQ STM051M5LQ STM051M5PQ STM051M5SN STM051M6N STM051M6DQ STM051M6HN STM051M6N STM051M6PQ STM051M6SN STM051M6SQ STM0655M STM0655N STM0655Q STM STM0656N STM065M5Q STM065M5N STM065M5FN STM065M5HN STM065M5IQ STM065M5LQ STM065M5N STM065M5SN STM065M STM065M6Q STM065M6N STM065M6HN STM065M6KN STM065M6SN Flex Term "Duckbill" STL P STL PN STL SN STL PN STL PN STL SN STL P STL PN STL PN STL SHN STL P STL PN STL SN STM PN STM SN STM PN STM SN STM P STM PN STM SN STM PN STM PQ STM SN STM P STM PM STM PN STM PQ STM SN STM P STM PN STM PQ STM SN Solder up Termination SSL PN SSL SN SSL P SSL PN SSL SN SSL PM SSL PN SSL SN SSM P SSM PH SSM PN SSM SN SSM P SSM PN SSM SN SSM PN SSM S SSM SN SSM SQ SSM P SSM PN SSM PN SSM SN STL P STL PN STL SN STL P STL PN STL SN STL P STL PN STL S STL PN STL SN STL PN STL PN STM PN STM SN STM PN STM PQ STM SHN STM SN STM SQ STM P STM PN STM PQ STM S STM SN STM PN STM PQ STM SN STM PN STM PQ STM SN STM SQ STM P STM PN STM SN STM SQ Panel Mount PSM005S2D024N PSM009S2D060N PTM009S2D060N PTM015S2D024N PTM015S2D060N PTM025S2D060N PTM037S2D018N PTM065S2D018N

183 ircular onnectors Environmentally Sealed ircular onnectors NNONIS ircular onnectors Nanonics environmentally sealed circular offering represents one of the industry's smallest and most reliable connector designs. These connectors are ideally suited for applications where high density and reliability, and reduced size and weight are serious design parameters. long with these attributes, they also meet the immersion requirements of IP67, more specifically, one meter of water for two hours. Utilizing the same contact system and materials as the Dualobe rectangular series of connectors, the circular connectors are manufactured to the performance specifications of MIL-DTL The plug connectors are offered in both a quick disconnect or threaded coupling configuration, and the receptacle connectors are offered in either a flush mount or panel mount configuration. The quick disconnect plug will mate with both the flush and panel mount receptacles, while the threaded coupling plug will only mate with the panel mount receptacle. These connectors are available in pin counts of 7, 19, and 44. Optional backshells are also available for the plug connectors and the panel mount receptacle. Ideal for cableto-cable or cable-to-panel applications, Tyco Electronics can also accommodate harness assemblies and custom configurations. 6 Specifications Technical and Performance Data Electrical ontact Resistance ohms urrent Rating 1 amp max. per contact Dielectric Withstanding Voltage Volts RMS 60 Hz at room ambient conditions. t sea level 500V. t 70,000 ft. 150V. Insulation Resistance 5000 megohms min. (@ 500 VD) at room ambient conditions. Magnetic Permeability 2 mu max. Temperature Range -55 to +200 Durability 250 mates/demates Jam Nut Torque 7 Pos. - 6 in-lbs. max. 19 Pos. - 8 in-lbs. max. 44 Pos in-lbs. max. oupling Nut Torque 7 Pos. - 6 in-lbs. max. 19 Pos. - 8 in-lbs. max. 44 Pos in-lbs. max. 179

184 ircular onnectors Quick Disconnect Plug ssemblies Ø.165 [4.19].25 [6.35] Ø.25 [6.35] 19 Position.525 [13.34] Product Facts Position 1 O-Ring Seal oupling Sleeve Metal Shell Positions: 7, 19 and 44 Environmental O-ring seal Push-Pull quick-disconnect coupling Factory wired to your specifications ontact Tyco Electronics for custom configurations Ø.215 [5.46] Locking Ring 7 Position Drawing Number [6.35] Plug ssembly, ircular, Quick Disconnect, Metal, 7 Position Ø.30 [7.62].525 [13.34] Position 1 O-Ring Seal oupling Sleeve Locking Ring 19 Position Drawing Number Plug ssembly, ircular, Quick Disconnect, Metal, 19 Position

185 ircular onnectors Quick Disconnect Plug ssemblies (ontinued).25 [6.35] Ø.395 [10.03] Ø.315 [8.00] Position 1 O-Ring Seal.525 [13.34] oupling Sleeve NNONIS ircular onnectors Locking Ring 6 44 Position Drawing Number Plug ssembly, ircular, Quick Disconnect, Metal, 44 Position

186 ircular onnectors Quick Disconnect Plug ssemblies with ackshells Product Facts Metal Shell.25 [6.35].215 [5.46] Positions: 7, 19 and 44 Environmental O-ring seal Factory wired to your specifications ackshell installed at factory ontact Tyco Electronics for custom configurations Ø.25 [6.35] Ø.165 [4.19].525 [13.34].275 [6.99] Ø.130 [3.30] Position 1 O-Ring Seal oupling Sleeve Locking Ring ackshell 7 Position Drawing Number Plug ssembly, ircular, Quick Disconnect, Metal, 7 Position w/ ackshell.25 [6.35].215 [5.46] Ø.180 [4.57] Ø.30 [7.62] Ø.215 [5.46].525 [13.34].275 [6.99] Position 1 O-Ring Seal oupling Sleeve Locking Ring ackshell 19 Position Drawing Number Plug ssembly, ircular, Quick Disconnect, Metal, 19 Position w/ ackshell

187 ircular onnectors Quick Disconnect Plug ssemblies with ackshells (ontinued).25 [6.35].265 [6.73] Ø.240 [6.10] Ø.395 [10.03] Ø.315 [8.00] Position 1 O-Ring Seal.525 [13.34].325 [8.26] oupling Sleeve NNONIS ircular onnectors 6 Locking Ring ackshell 44 Position Drawing Number Plug ssembly, ircular, Quick Disconnect, Metal, 44 Position w/ ackshell

188 ircular onnectors Quick Disconnect Receptacle ssemblies, Flush Mount Jam Nut.425 [10.80].060 [1.52] Ø.312 [7.92] 19 Position.250 [6.35] Max Panel Thickness.065 [1.65] O-Ring Seal Position 1 Product Facts Metal Shell Positions: 7, 19 and 44 ulkhead O-ring seal Factory wired to your specifications ontact Tyco Electronics for custom configurations.204 [5.18].312 Hex (Jam Nut) [7.92] 7 Position Drawing Number Receptacle ssembly, ircular, Flush Mount, Quick Disconnect, Metal, 7 Position Jam Nut.425 [10.80].060 [1.52] Ø.375 [9.53].250 [6.35] Max Panel Thickness O-Ring Seal Position [1.65].258 [6.55].375 [9.53] Hex (Jam Nut) 19 Position Drawing Number Receptacle ssembly, ircular, Flush Mount, Quick Disconnect, Metal, 19 Position

189 ircular onnectors Quick Disconnect Receptacle ssemblies, Flush Mount (ontinued) Jam Nut.425 [10.80].060 [1.52] Ø.500 [12.7].258 [6.55].250 [6.35] Max Panel Thickness.065 [1.65].375 [9.53].500 Hex (Jam Nut) [12.7] 44 Position Drawing Number O-Ring Seal Position 1 NNONIS ircular onnectors 6 185

190 ircular onnectors Threaded oupling Plug ssemblies Ø.165 [4.19].375 [9.53] Ø.315 [8.00] 19 Position.525 [13.34] Product Facts Position 1 O-Ring Seal oupling Nut Metal Shell Positions: 7, 19 and 44 Environmental O-ring seal Factory wired to your specifications ontact Tyco Electronics for custom configurations 7 Position Drawing Number Plug ssembly, ircular, Panel Mount, Threaded oupling, Metal, 7 Position.375 [9.53] Ø.355 [9.02] Ø.215 [5.46].525 [13.34] Position 1 O-Ring Seal oupling Nut 19 Position Drawing Number Plug ssembly, ircular, Panel Mount, Threaded oupling, Metal, 19 Position

191 ircular onnectors Threaded oupling Plug ssemblies (ontinued).375 [9.53] Ø.475 [12.07] Ø.315 [8.00] Position 1 O-Ring Seal.525 [13.34] oupling Nut NNONIS ircular onnectors 44 Position Drawing Number Plug ssembly, ircular, Threaded oupling, Metal, 7 Position

192 ircular onnectors Threaded oupling Plug ssemblies with ackshells Product Facts Metal Shell Positions: 7, 19 and 44 Environmental O-ring seal Factory wired to your specifications ackshell installed at factory Ø.315 [8.00] Ø.165 [4.19].375 [9.53].215 [5.46] Ø.130 [3.30] Ø.25 [6.35] ontact Tyco Electronics for custom configurations.525 [13.34].275 [6.99] Position 1 O-Ring Seal oupling Sleeve ackshell 7 Position Drawing Number [9.53].215 [5.46] Plug ssembly, ircular, Panel Mount, Threaded oupling, Metal, 7 Position w/ ackshell Ø.180 [4.57] Ø.30 [7.62] Ø.355 [9.02] Ø.215 [5.46].525 [13.34].275 [6.99] Position 1 O-Ring Seal oupling Nut ackshell 19 Position Drawing Number Plug ssembly, ircular, Threaded oupling, Metal, 19 Position w/ ackshell

193 ircular onnectors Threaded oupling Plug ssemblies with ackshells (ontinued).375 [9.53].265 [6.73] Ø.240 [6.10] Ø.395 [10.03] Ø.475 [12.07] Ø.315 [8.00] Position 1 O-Ring Seal.525 [13.34].325 [8.26] oupling Nut NNONIS ircular onnectors 6 ackshell 44 Position Drawing Number Plug ssembly, ircular, Threaded oupling, Metal, 44 Position w/ ackshell

194 ircular onnectors Threaded oupling/quick Disconnect Receptacle ssemblies, Panel Mount.550 [13.97].065 [1.65].350 [8.89] 19 Position Ø.25 [6.35] Product Facts Metal Shell Positions: 7, 19 and 44 ulkhead O-ring seal Factory wired to your specifications Panel Mount receptacle mates with the Quick Disconnect Plug and the Threaded oupling Plug ontact Tyco Electronics for custom configurations.406 [10.31] Hex 7 Position Drawing Number [1.65].550 [13.97].350 [8.89].060 [1.52] O-Ring Seal Jam Nut Position 1 Receptacle ssembly, ircular, Panel Mount, Threaded oupling/ Quick Disconnect, Metal, 7 Position [6.55] Ø.30 [7.62].060 [1.52] O-Ring Seal Position [11.91] Hex.298 [7.57] Jam Nut 19 Position Drawing Number Receptacle ssembly, ircular, Panel Mount, Threaded oupling/ Quick Disconnect, Metal, 19 Position

195 ircular onnectors Threaded oupling/quick Disconnect Receptacle ssemblies, Panel Mount (ontinued).065 [1.65].550 [13.97].350 [8.89] Ø.395 [10.03].563 [14.30] Hex.060 [1.52] O-Ring Seal Position [10.52] NNONIS ircular onnectors 44 Position Drawing Number Jam Nut Receptacle ssembly, ircular, Panel Mount, Threaded oupling/ Quick Disconnect, Metal, 44 Position

196 ircular onnectors Threaded oupling/quick Disconnect Panel Mount Recp. ssemblies w/ackshells Product Facts Metal Shell Positions: 7, 19 and 44 ulkhead O-ring seal Factory wired to your specifications Panel Mount receptacle mates with the Quick Disconnect Plug and the Threaded oupling Plug ontact Tyco Electronics for custom configurations Ø.25 [6.35] Ø.130 [3.30].275 [6.99].065 [1.65].215 [5.46].550 [13.97].350 [8.89].060 [1.52] O-Ring Seal Position [10.31] Hex.258 [6.55] ackshell Jam Nut Receptacle ssembly 7 Position Drawing Number Receptacle ssembly, ircular, Panel Mount, Threaded oupling/quick Disconnect, Metal, 7 Position w/ ackshell [6.99].065 [1.65].550 [13.97].350 [8.89] Ø.30 [7.62] Ø.180 [4.57].215 [5.46].060 [1.52] O-Ring Seal Position [11.91] Hex.298 [7.57] ackshell Jam Nut Receptacle ssembly 19 Position Receptacle ssembly, ircular, Drawing Number Panel Mount, Threaded oupling/quick Disconnect, Metal, 19 Position w/ ackshell

197 ircular onnectors Threaded oupling/quick Disconnect Panel Mount Recp. ssemblies w/ackshells (ontinued).325 [8.26].065 [1.65].550 [13.97].350 [8.89] Ø.395 [10.03] Ø.240 [6.10].563 [14.30] Hex.060 [1.52] O-Ring Seal Position [10.52] NNONIS ircular onnectors ackshell Jam Nut 6 Receptacle ssembly 44 Position Drawing Number Receptacle ssembly, ircular, Panel Mount, Threaded oupling/quick Disconnect, Metal, 44 Position w/ ackshell

198 ircular onnectors Part Numbering Guideline for Environmentally Sealed ircular onnectors ircular onnectors - Wire Terminations lass/type QM Quick Disconnect, ircular, Metal TM Threaded oupling, ircular, Metal (TM leadoff for plug only) XXX XXX XX X XX XXX X(X) ircular Mounting/Features Mounting (Receptacles Only) P Panel Mount F Flush Mount Features (Optional) ackshell (cannot be used with flush mount) Positions Position Position Position onfiguration P Plug S Receptacle onductor Size/Strands 0 28 WG Solid 1 30 WG Solid 2 30 WG 7 Strand 3 32 WG 7 Strand 4 34 WG 7 Strand onductor Length XXX Three numbers only, length is in inches ( i.e. 012 = twelve inches) XX follwed by two numbers, length is in centimeters ( i.e. 06 = 6 centimeters) MXX n M followed by two numbers, length is in meters ( i.e. M02 = 2 meters) onductor Type DX White Teflon DY White PTFE per M16878/6 D olor oded Teflon DM olor oded Teflon per MIL-STD-681 DT White Tefzel per M22759/33 194

199 ircular onnectors Part Number Index ross Reference Nanonics Part Number Tyco Part Number Nanonics Part Number Tyco Part Number Nanonics Part Number Tyco Part Number Nanonics Part Number Tyco Part Number Quick Disconnect QM007P2D QM007P2D QM007P2D QM007P2D QM007P2D QM007P2D QM007P2D QM007P2D QM007P2D QM007P2D QM007P2D QM007P2D QM007P2D QM007P2D QM007P2D QM007P2DM QM007P2DM QM007P2DM QM007P2DM QM007P2DM QM007P2DM QM007P2DM QM007P2DM QM007P2DX QM007S2D003P QM007S2D004P QM007S2D006F QM007S2D006P QM007S2D012P QM007S2D012P QM007S2D018P QM007S2D020F QM007S2D020P QM007S2D036P QM007S2D036P QM007S2D15F QM007S2D15P QM007S2D20F QM007S2D30F QM007S2D30P QM007S2DM003P QM007S2DM006P QM007S2DM050P QM007S2DM05F QM007S2DM16F QM007S2DM46F QM007S2DX006F QM007S2DY15P QM007S2DYM02P QM007S2DYM1.5P QM019P0D QM019P0DM QM019P2D QM019P2D QM019P2D QM019P2D QM019P2D QM019P2D QM019P2D QM019P2D QM019P2DM QM019P2DM QM019P2DM QM019P2DMM QM019P2DX QM019S0D012F QM019S0D036P QM019S0D15P QM019S0DM012F QM019S0DM072F QM019S0DM30P QM019S0DX15P QM019S2D003F QM019S2D003P QM019S2D006F QM019S2D006P QM019S2D012F QM019S2D012P QM019S2D018F QM019S2D020F QM019S2D020P QM019S2D024P QM019S2D036P QM019S2D180F QM019S2D30P QM019S2DM006P QM019S2DM024P QM019S2DM027P QM019S2DM036P QM019S2DM05F QM019S2DM16F QM019S2DM30P QM019S2DM46F QM019S2DX30F QM019S2DX30P QM019S4DX006P QM044P2D QM044P2D QM044P2D QM044P2D QM044P2D QM044P2D QM044P2D QM044P2D QM044P2D QM044P2D QM044P2D QM044P2D QM044P2D QM044S0DM036P QM044S0DM048P QM044S0DM060P QM044S2D003P QM044S2D006F QM044S2D006P QM044S2D012F QM044S2D012P QM044S2D018F QM044S2D018P QM044S2D019P QM044S2D020F QM044S2D020P QM044S2D024F QM044S2D024P QM044S2D036P QM044S2D060F QM044S2D080P QM044S2D180F QM044S2DM036P QM044S2DM120P QM044S2DM16P QM044S2DM46P QM044S2DM50P QM044S3D012F Threaded oupling TM007P2D TM007P2D TM007P2D TM007P2D TM007P2D TM007P2D TM007P2D TM007P2D TM007P2DM TM007P2DM TM007P2DM TM007P2DY TM007P2DYM TM019P0D TM019P0D TM019P0DX TM019P2D TM019P2D TM019P2D TM019P2D TM019P2D TM019P2D TM019P2D TM019P2D TM019P2D TM019P2D TM019P2D TM019P2DM TM019P2DM TM019P2DM TM044P0DM TM044P0DM TM044P0DM TM044P2D TM044P2D TM044P2D TM044P2D TM044P2D TM044P2D TM044P2D TM044P2D TM044P2D TM044P2D TM044P2D TM044P2D TM044P2D TM044P2DM TM044P2DM TM044P2DM TM044P2DM NNONIS ircular onnectors 6 195

200 ircular onnectors Engineering Notes 196

201 oaxial onnectors oaxial onnectors The Nanonics 50 ohm coaxial connector system combines the benefits of the rectangular DULOE connectors while offering the flexibility to terminate up to nine coaxial contacts within the same metal connector housing. Furthermore, with this unique design, five signal contacts, terminated with 30 WG or smaller discrete wire, can also be integrated into this connector package. These connectors are typically used in applications with frequencies up to 20 GHz. RG-178 coax coaxial cable is the standard cable used on these connectors. The receptacle coax connector is also available in a horizontal surface mount configuration allowing for wire to board applications. Harness assemblies and custom configurations can also be accommodated. NNONIS oaxial onnectors 7 Specifications Technical and Performance Data Electrical ontact Resistance ohms urrent Rating 1 amp max. per contact Dielectric Withstanding Voltage Volts RMS 60 Hz at room ambient conditions. t sea level 500V. t 70,000 ft. 150V. Insulation Resistance 5000 megohms min. (@ 500 VD) at room ambient conditions. Magnetic Permeability 2 mu max. Temperature Range -55 to +125 Outer oaxial ontacts eu lloy plated with gold per MIL-G over nickel Dielectric Insert Teflon raid Termination Soldered to outer coaxial contacts with SN63P637 solder ackpotting Standard for wire terminations 197

202 oaxial onnectors Typical VSWR and Insertion Loss Note: Insertion Loss of 30 WG oax (50 Ohm) is approximately 3 GHz. The connector system with 6" of coax on each side, is better than 3 GHz. 198

203 oaxial onnectors 50 Ohm oax onnectors D.100 [2.54].075 [1.91] 2 Plcs. Plug.205 [5.21].117 [2.97].100 [2.54] Pitch.078 [1.98] Typ. Receptacle.166 [4.22] Product Facts Metal Shell Standard Sizes: 1-9 Factory wired to your specifications ontact Tyco Electronics for custom configurations.223 [5.66].100 [2.54] Plug ssembly Drawing Number D Plug ssembly, 1-9 oax Only, 50 OHM, Metal.112 [2.84] 2 Plcs NNONIS oaxial onnectors.078 [1.98] Typ..100 [2.54] Pitch [4.22] Receptacle ssembly Drawing Number Size Dimensions Receptacle ssembly, 1-9 oax Only, 50 DOHM, Metal No. oax [6.45] [8.51] [4.57] [8.99] [11.05] [7.11] [11.53] [13.59] [9.65] [14.07] [16.13] [12.19] [16.61] [18.67] [14.73] [19.15] [21.21] [17.27] [21.69] [23.75] [19.81] [24.23] [26.29] [22.35] [26.77] [28.83] [24.89] 9 199

204 oaxial onnectors Part Numbering Guideline for 50 Ohm oax onnectors oax Only onnectors - Wire Terminations lass/type X oax, 50 Ohm Positions Position Position Position Position Position Position Position Position Position X XXX XX 2 RG XXX X Threads/Jackscrews Threads (Receptacles Only) Jackscrews (Plugs Only) N Thread for 1.0 mm Jackscrews M 1.0 mm Non aptive Jackscrews Q Thread for 1.2 mm Jackscrews N 1.0 mm aptive Jackscrews Q 1.2 mm aptive Jackscrews onductor Length XXX Three numbers only, length is in inches ( i.e. 012 = twelve inches) XX follwed by two numbers, length is in centimeters ( i.e. 06 = 6 centimeters) MXX n M followed by two numbers, length is in meters ( i.e. M02 = 2 meters) onductor Type RG RG 178 oaxial able onfiguration P Plug S Receptacle onductor Size 2 30 WG 200

205 oaxial onnectors Horizontal SMT 50 Ohm oax onnectors.0075 [.19] Typ..100 [2.54] Pitch.0415 [1.05] Surface Mount.223 [5.66].112 [2.84] 2 Plcs. Product Facts Metal Shell Standard Sizes: 1-9 Factory wired to your specifications ontact Tyco Electronics for custom configurations.100 [2.54] Pitch.078 [1.98] Typ..166 [4.22] [8.20] Typ. [.61] Typ. Receptacle ssembly Drawing Number Receptacle ssembly, Horizontal SMT, 1-9 oax Only, 50 OHM, Metal Size Dimensions No. oax [.32] [6.45] [8.51] [1.59] [8.99] [11.05] [2.86] [11.53] [13.59] [4.13] [14.07] [16.13] [5.40] [16.61] [18.67] [6.67] [19.15] [21.21] [7.94] [21.69] [23.75] [9.21] [24.23] [26.29] [10.48] [26.77] [28.83] 9 NNONIS oaxial onnectors 7 201

206 oaxial onnectors Part Numbering Guideline for Horizontal SMT 50 Ohm oax onnectors oax Only onnectors - SMT Termination lass/type X oax, 50 ohm Positions Position Position Position Position Position Position Position Position Position X XXX L2 XXX X Jackscrew Threads Threads N Thread for 1.0 mm Jackscrews Q Thread for 1.2 mm Jackscrews Mounting Hardware 1.2 mm x.160 H 1.0 mm x.160 onfiguration L2 Receptacle, Horizontal SMT 202

207 oaxial onnectors 50 Ohm oax with Mixed Signal onnectors D.100 [2.54].075 [1.91] 2 Plcs. Plug.205 [5.21].117 [2.97].166 [4.22].078 [1.98] Typ..038 [.97] 2 Plcs..118 [3.00] 2 Plcs. Receptacle Product Facts Metal Shell Standard Sizes: 1-9 coaxial contacts with 5 signal contacts Factory wired to your specifications ontact Tyco Electronics for custom configurations.050 [1.27].025 [.64].100 [2.54] Pitch Plug ssembly Drawing Number [2.54] Plug ssembly, 1-9 oax Only, 50 OHM, 5 Signals, Metal.223 [5.66] D.112 [2.84] 2 Plcs. NNONIS oaxial onnectors.078 [1.98] Typ..118 [3.00] 2 Plcs..038 [.97] 2 Plcs..050 [1.27].025 [.64].100 [2.54] Pitch.166 [4.22] 7 Receptacle ssembly Drawing Number Size Dimensions D No. oax [6.45] [8.51] [4.57] [8.99] [11.05] [7.11] [11.53] [13.59] [9.65] [14.07] [16.13] [12.19] [16.61] [18.67] [14.73] [19.15] [21.21] [17.27] [21.69] [23.75] [19.81] [24.23] [26.29] [22.35] [26.77] [28.83] [24.89] 9 Receptacle ssembly, 1-9 oax Only, 50 OHM, 5 Signals, Metal

208 oaxial onnectors Part Numbering Guideline for 50 Ohm oax with Mixed Signal onnectors oax w/ Mixed Signal onnectors - Wire Terminations lass/type X oax, 50 ohm Positions Position w/ 5 Signals Position w/ 5 Signals Position w/ 5 Signals Position w/ 5 Signals Position w/ 5 Signals Position w/ 5 Signals Position w/ 5 Signals Position w/ 5 Signals Position w/ 5 Signals onfiguration P Plug S Receptacle X XXX XX 2 R X XXX X Threads/Jackscrew Threads (Receptacles Only) Jackscrews (Plugs Only) N Thread for 1.0 mm Jackscrews M 1.0 mm Non aptive Jackscrews Q Thread for 1.2 mm Jackscrews N 1.0 mm aptive Jackscrews Q 1.2 mm aptive Jackscrews onductor Length XXX Three numbers only, length is in inches ( i.e. 012 = twelve inches) XX follwed by two numbers, length is in centimeters ( i.e. 06 = 6 centimeters) MXX n M followed by two numbers, length is in meters ( i.e. M02 = 2 meters) onductor Type (Signals) olor oded Teflon X White Teflon onductor Type (oax) R RE-178 oaxial able onductor Size 2 30 WG 7 Strand 204

209 oaxial onnectors Part Number Index ross Reference Nanonics Part Number Tyco Part Number Nanonics Part Number Tyco Part Number Nanonics Part Number Tyco Part Number oax Only X010P2RG006N X010P2RG018N X010P2RG048Q X010P2RG072N X010P2RG10Q X010S2RG048Q X020P2RG018N X020P2RG048N X020P2RG060N X020S2RG012N X020S2RG018N X020S2RG024N X020S2RG024Q X020S2RG060N X030P2RG006N X030P2RG X030P2RG012N X030P2RG018N X030P2RG020Q X030P2RG048N X030P2RG060N X030S2RG006N X030S2RG X030S2RG012N X030S2RG060N X040P2RG012N X040P2RG030N X040P2RG039Q X040P2RG060N X040S2RG X040S2RG024N X050P2RG006N X050S2RG006N X060P2RG012N X060P2RG012Q X060P2RG018N X060P2RG036N X060P2RG072N X060P2RG144N X060P2RG10Q X060S2RG012Q X070P2RG10Q X080P2RG006N X080P2RG012N X080P2RG012Q X080P2RG018N X080P2RG024N X080P2RG036N X080P2RG048N X080P2RG060N X080P2RG10N X080S2RG012N X080S2RG012Q X080S2RG015N X080S2RG024N X090P2RG036N X090S2RG036N oax with Mixed Signals X015P2R X015P2R012N X015S2R012N X035P2R006N X035P2R018N X035S2R006N X035S2R018N X045P2R006N X045P2R036N X045P2R036Q X045S2R006N X045S2R006Q X055P2R006N X055S2R006N X095P2R006N X095P2R036N X095S2R006N Horizontal SMT oax X010L2Q X010L2HN X020L2HN X030L23N X030L23Q X030L2HN X040L2Q X040L2HN X050L23Q X050L2HN X060L2Q X060L2HN X070L2Q X080L2HN NNONIS oaxial onnectors 7

210 oaxial onnectors Engineering Notes 206

211 Strip onnectors Strip onnectors The Nanonics strip connectors are the smallest connectors in the Nanonics product line. They are molded from LP and are ideal for applications where the height and weight of the connector is a serious design parameter. Just.040 in height, these connectors are well suited for low-profile applications. Standard sizes are 4, 9, and 15, while 25, 37, and 51 are also available upon request. Standard configurations include wired, surface mount, or thru-hole terminations. Guide pins are available for polarization. Harness assemblies and custom configurations can also be accommodated. Polarization Polarization of the strips is accomplished with the use of optional polarizing guide posts. Polarization Position "T" Shown NNONIS Strip onnectors 8 207

212 Strip onnectors Wired onnectors Unshrouded, Flying Leads Product Facts Plastic Shell Standard Sizes: 4, 9, 15, 25, 37 and 51 Factory wired to your specifications ontact Tyco Electronics for custom configurations.205 [5.21].111 [2.82].060 [1.52] Typ. L L Position 1 Position [1.02].040 [1.02] Plug ssembly Drawing Number Plug ssembly, Unshrouded Strip, Flying Leads, Plastic Receptacle ssembly Drawing Number Receptacle ssembly, Unshrouded Strip, Flying Leads, Plastic Size Dimensions L [2.92] [1.91] [6.10] [5.08] [9.91] [8.89] [16.26] [15.24] [23.88] [22.86] [32.77] [31.75] 208

213 Strip onnectors Part Numbering Guideline for Strip Wired onnectors Strip onnectors - Wire Terminations lass/row/type USS Unshrouded, 1 row, strip Positions Position Position Position Position onfiguration P Plug S Receptacle onductor Size/Strands 0 28 WG Solid 1 30 WG Solid 2 30 WG 7 Strand 3 32 WG 7 Strand 4 34 WG 7 Strand USS XXX XX X XX XXX X Polarization (optional) Plug contains guide post Receptacle accepts guide post onductor Length XXX Three numbers only, length is in inches ( i.e. 012 = twelve inches) XX followed by two numbers, length is in centimeters ( i.e. 06 = 6 centimeters) MXX n M followed by two numbers, length is in meters ( i.e. M02 = 2 meters) onductor Type DX White Teflon DY White PTFE per M16878/6 D olor oded Teflon DM olor oded Teflon per MIL-STD-681 DT White Tefzel per M22759/33 Polarization (Strip Type Only) T = One Pin U = One Pin V = One Pin W = Two Pin Y = Two Pin Z = Two Pin NNONIS Strip onnectors 8 209

214 Strip onnectors Surface Mount onnectors Unshrouded Product Facts Plastic Shell Standard Sizes: 4, 9, 15, 25, 37 and 51 Factory wired to your specifications ontact Tyco Electronics for custom configurations Suggested Pad Layouts are available on the referenced drawings on the Tyco Electronics website Position [5.21] L.025 [.64] Pitch.020 [.51] Typ..255 [6.48] Typ..040 [1.02] Plug ssembly Drawing Number Plug ssembly, Unshrouded Strip, Horizontal SMT, Plastic [.64] Pitch.020 [.51] Typ..111 [2.82].060 [1.52] Typ..161 [4.09] Typ. L Position [1.02] Receptacle ssembly Drawing Number Receptacle ssembly, Unshrouded Strip, Horizontal SMT, Plastic Size Dimensions L [.95] [2.92] [1.91] [2.54] [6.10] [5.08] [4.45] [9.91] [8.89] [7.62] [16.26] [15.24] [11.43] [23.88] [22.86] [15.88] [32.77] [31.75] 210

215 Strip onnectors Thru-Hole onnectors Unshrouded, Horizontal, 1 Row to 2 Row,.050 Spacing Product Facts Plastic Shell Standard Sizes: 4, 9, 15, 25, 37 and 51 Factory wired to your specifications ontact Tyco Electronics for custom configurations Suggested Thru-Hole Layouts are available on the referenced drawings on the Tyco Electronics website.205 [5.21] L.050 [1.27] Typ..255 [1.27] Typ..090 [2.29] Typ..040 [1.02] Position 1 Plug ssembly Drawing Number Plug ssembly, Unshrouded Strip, Horizontal Mount, Through Hole, 1 to 2 Row,.050 Spacing [1.27] Typ..111 [2.82].060 [1.52] Typ..161 [4.09] Typ..040 [1.02] L Position [2.29] Typ. NNONIS Strip onnectors Receptacle ssembly Drawing Number Receptacle ssembly, Unshrouded Strip, Horizontal Mount, Through Hole, 1 to 2 Row,.050 Spacing Size Dimensions L [2.92] [1.91] [6.10] [5.08] [9.91] [8.89] [16.26] [15.24] [23.88] [22.86] [32.77] [31.75] 8 211

216 Strip onnectors Part Numbering Guideline for Surface Mount and Thru Hole Termination Strip onnectors - Surface Mount and Thru Hole Terminations lass/row/type USS Unshrouded, 1 row, strip Positions Position Position Position Position USS XXX XX X Polarization (optional) Plug contains guide post Receptacle accepts guide post onfiguration 2 Plug, Horizontal SMT L2 Receptacle, Horizontal SMT 6 Plug, Horizontal Mount, Thru Hole M6 Receptacle, Horizontal Mount, Thru Hole Polarization (Strip Type Only) T = One Pin U = One Pin V = One Pin W = Two Pin Y = Two Pin Z = Two Pin 212 atalog Dimensions are in inches and Dimensions are shown for US: South merica: Issued 3-05 millimeters unless otherwise reference purposes only. anada: Hong Kong:

217 Strip onnectors Part Number Index ross Reference Nanonics Part Number Tyco Part Number Nanonics Part Number Tyco Part Number Nanonics Part Number Tyco Part Number Nanonics Part Number Tyco Part Number Wire Terminations USS004P2D USS004P2D USS004P2D006T USS004P2D USS004P2D USS004P2D012T USS004P2D012U USS004P2D USS004P2D USS004P2D036T USS004P2D20T USS004P2D USS004P2DM USS004P2DM012T USS004P2DM024T USS004P2DM USS004P2DM USS004P2DM USS004P2DMM USS004P2DMM USS004P2DN USS004P2DX USS004P2DX USS004P2GX USS004P2GX USS004P3D USS004P4DX USS004S2D USS004S2D USS004S2D003T USS004S2D USS004S2D USS004S2D006T USS004S2D USS004S2D USS004S2D012T USS004S2D012U USS004S2D USS004S2D USS004S2D USS004S2D20T USS004S2D USS004S2DM USS004S2DM012T USS004S2DM024T USS004S2DM USS004S2DM USS004S2DM USS004S2DMM USS004S2DMM USS004S2DN USS004S2DT20T USS004S2DX USS004S2DX012T USS004S2GX USS004S2GX USS004S3D USS004S3DX004T USS004S4DX USS009P0D006T USS009P2D USS009P2D006W USS009P2D008U USS009P2D USS009P2D012T USS009P2D012V USS009P2D018V USS009P2D USS009P2D USS009P2D036T USS009P2D036U USS009P2D036V USS009P2D05T USS009P2DM USS009P2DM012T USS009P2DM024T USS009P2DX USS009P2DX004T USS009P2DX006T USS009P2DX USS009P2GX USS009P2GX USS009P3D USS009S0D006T USS009S2D USS009S2D USS009S2D006W USS009S2D006Z USS009S2D USS009S2D USS009S2D012T USS009S2D012Z USS009S2D USS009S2D018T USS009S2D018V USS009S2D USS009S2D025T USS009S2D036T USS009S2D036U USS009S2D036V USS009S2D036W USS009S2D060T USS009S2D05T USS009S2DM USS009S2DM01T USS009S2DM012T USS009S2DM024T USS009S2DT012T USS009S2DX004T USS009S2DX006T USS009S2DX USS009S2GX USS009S2GX USS009S3D USS009S3DX004T USS015P1D036T USS015P1D036W USS015P2D USS015P2D USS015P2D012T USS015P2D012V USS015P2D USS015P2D018V USS015P2DM60T USS015P2DX004T USS015P2DX USS015P2DX024T USS015P3D USS015S1D036T USS015S1D036W USS015S2D USS015S2D USS015S2D012T USS015S2D018V USS015S2D024T USS015S2D USS015S2D036T USS015S2DM60T USS015S2DX004T USS015S2DX006T USS015S2DX018T USS015S3D USS015S3DX004T USS025P2D USS025P2D USS025P2DT006T USS025P2DX018T USS025S2D USS025S2D USS025S2DT006T USS037P1DX USS037P2D USS037P2D USS037P2D020T USS037P2DN USS037P2DT006T USS037S1DX USS037S1DY USS037S2D USS037S2D USS037S2D036T USS037S2DT006T USS037S2DX006T USS051P2D USS051P2DX USS051S2D Surface Mount USS USS0042T USS USS00445T USS0044T USS004L USS004L2T USS USS0092T USS0092TE USS0092Z USS00943T USS0094T USS009L USS009L2T USS009L2U USS009L2V USS USS0152T USS0154T USS015L USS015L2T USS015L2V USS USS0254T USS025L USS025L4T USS USS0372T USS037L USS037L2T USS USS051L Thru-Hole USS USS0046T USS004M USS USS0096T USS0096V USS009M USS NNONIS Strip onnectors 8 213

218 Strip onnectors Engineering Notes 214

219 MIRONOT and NNONIS onnectors Part Number Index Note: This index lists all cataloged parts by base no. only. omplete part nos. (with prefixes and/or suffixes) are shown on the page(s) indicated. Part No. Page Part No. Page , 104, , 101, , 101, ,101, , , , Part No , , , , , , 98, 103, , , , , , , , 96, , 96, , , 96, , 96, , 105, , 105, , , 96, , , , , , 101, , 101, , , , , , , , 101, , 101, , , , , , , , , , 96, , 96, , 96, , 101, , 101, 131 Page Part No. Page , 101, , 104, , 94, , 94, , 104, , 95, , 95, , 95, , 104, , 94, , , 94, , 94, , 94, , 94, , 104, , 104, , 104, , 104, , 104, , 94, , , 100, , 100, , 100, , 101, , 100, , 100, , 101, , 101, , 94, , 94, , 95, , 94, , 104, 105, , 100, , 94, , 104, , 101, , 100, , , , 94, , , 94, , 94, , 94,

220 MIRONOT and NNONIS onnectors Part Number Index (ontinued) 216 Part No. Page , 95, , 94, , 94, , 94, Part No. Page , , , , , , , 94, , , , 94, , 95, , 95, , 94, , 95, , 104, 105, , , 94, , 94, , 95, , 95, , 95, , , 95, , 94, , 95, , , 94, , Part No. Page T1 63, T Y Y9 63, Y R4 63, R4 63, R4 63, R T T T2 63, T T T , , , L J L J L J J L J L J L , , , 80 Part No. Page , , , , , , P W P W P W P P P P P P F X F X F X F X F X F X W P F F L L , F N F N F N F N F N F N F N F N

221 MIRONOT and NNONIS onnectors Part Number Index (ontinued) Part No. Page P P P P L L L L F F F F L L L L N N N N N N N N , , , , , , 134 Part No. Page , , , , , , , , , 133 Part No , , , , , Page Part No. Page ircular onnectors 194 oax Only Wire Terminations 200 oax SMT Termination 202 oax w/mixed Signal 204 DULOE Jumper Terminations 149 DULOE Panel Mount onnectors 169 DULOE SMT & Thru-Hole Terminations 161 DULOE Solder up Termination 166 DULOE Wire Terminations 144 Flex Termination Duckbill onnectors 163 HDSM

222 MIRONOT and NNONIS onnectors Part Number Index (ontinued) Part No. Page MD 7 MD**- 11, 12 MDM 25 MDM1 26 MDM3 28 MDR3 32, 33, 34 ME 41 MEM 42 MEM1 44 MJ 46, 47 MJM 48, 49 MK 7, 16, 19 MK-** 9, 17, 20, 23, 31, 32, 34, 35 MS 50 MD53 67, 68 MD53-00E 70 MD53-01E 70 MD53-02E 71 MD53-06E 69 MD53-12E 71 MD53-16E 69 MD63-* 75 MD63-00E 76 MD63-01E 76 MD63-02E 76 MD73-* 83 MD73-00E 84 MD73-01E 85 MD73-02E 84 MD73-06E 84 MQR-* 87 MT-* 89 S S S S S S S S S S Strip onnectors 209 Strip onnectors, SMT & ThruHole 212 T53-*

223 MIRONOT and NNONIS onnectors Engineering Notes 219

224 MIRONOT and NNONIS onnectors Engineering Notes 220

225 Global ontacts mericas rgentina uenos ires Phone: Fax: rasil São Paulo Phone: Fax: anada Markham Phone: Fax: Product Information enter: (Technical Support) Phone: Fax: olombia ogota Phone: Fax: Mexico Mexico ity Phone: Fax: United States Harrisburg, P Phone: Fax: Product Information enter: (Technical Support) Phone: Fax: For Latin/South merican ountries not shown Phone: Fax: sia/ Pacific ustralia Sydney Phone: Fax: Product Information enter: (Technical Support) Phone: Fax: India angalore Phone: Fax: Indonesia Jakarta Phone: Fax: Japan Toyko Phone: Fax: Product Information enter: (Technical Support) Phone: Fax: Raychem Products Phone: Fax: Korea Seoul Phone: Fax: Malaysia Kuala Lumpur Phone: Fax: New Zealand uckland Phone: Fax: Philippines Makati ity Phone: Fax: People s Republic of hina Hong Kong Phone: Fax: Shanghai Phone: / Fax: / Shunde Phone: Fax: Europe/ Middle East/frica ustria Vienna Phone: Fax: elgium Kessel-Lo Phone: Fax: ulgaria Sofia Phone: Fax: zech Republic Kurim Phone: Fax: Denmark Viby J Phone: Fax: Egypt airo Phone: Fax: Estonia Tallinn Phone: Fax: Finland Helsinki Phone: Fax: France ergy-pontoise Phone: Fax: Product Information enter: (Technical Support) Phone: Fax: France Tyco Electronics Export St Ouen L umone Phone: Fax: or Germany ensheim Phone: Fax: Product Information enter: (Technical Support) Phone: Fax: Germany Langen Phone: Fax: Germany Speyer Phone: Fax: Germany HTS Division Neunkirchen Phone: Fax: Great ritain Stanmore Middlesex Phone: Fax: Product Information enter: (Technical Support) Freephone G: Phone: Fax: Great ritain Dorcan, Swindon Raychem Products Phone: Fax: Greece thens Phone: /397 Fax: Hungary udapest Phone: Fax: Ireland Dublin Phone: Fax: Israel Yokneam Phone: Fax: Italy ollegno (Torino) Phone: Fax: Lithuania Vilnius Phone: Fax: Netherlands s-hertogenbosch Phone: Fax: Product Information enter: (Technical Support) Phone: Fax: Norway Nesbru Phone: Fax: Poland Warsaw Phone: Fax: Romania ucharest Phone: /3596 Fax: Russia Moscow Phone: /07/08/09 Fax: Russia St. Petersburg Phone: Fax: Slovakia anská ystrica Phone: /12 Fax: Slovenia Ljubljana Phone: Fax: South frica Port Elizabeth Phone: Fax: Spain arcelona Phone: Fax: Product Information enter: (Technical Support): Phone: Fax: Sweden Upplands Väsby Phone: Fax: Switzerland Steinach Phone: Fax: Turkey Istanbul Phone: /2/3 Fax: Ukraine Kiev Phone: Fax: M GI GX 8-05 Tyco Electronics orporation

226 Tyco Electronics orporation Harrisburg, Pennsylvania M GI GX 8-05