Micro-d. High-Performance

Transcription

1 igh-erformance icro-d OTORS S October 203

2 mi-t-8353 ORI IRO miro-d igh erformance Twistin quipped onnectors and ables The lenair family of Twistin equipped icro-d connectors offer outstanding mating performance, durability and minimal contact resistance. icro- onnectors feature igh density micro Twistin contacts set on.050 centers in arranngements from 9 to 30 contacts. They are availlable with insulated and uninsulated wire,, solder cup and flex terminations and are supplied as or commercial variations. Our icro- connectors provide a solution to meet your high performance requirements including high temperature and hermetic applications and are in stock and available for immediate same day shipment. lenair, Inc. 2 ir Way lendale, [email protected]

3 icro- ermetic IX Index Index Stainless Steel ackpost its, Rear anel or Rear anel for il Spec and ommercial arts -2 Stainless Steel ackscrew its with -Rings for il Spec and ommercial arts lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X Index-3 -ail: [email protected] ermetic IX onnector Shell, etal icro- Specifications icro- Standard aterials and inishes lating code 2: electroless nickel in accordance with ST 733 lating code 33: nickel-ptfe in accordance with Stainless Steel, 300 Series: lating ode 3: assivated In ccordance With S S 2700 Terminal lock, ( & S) accordance with I in ontact (Twistin) S S---290, class 2, (30-50 microinches). Socket ontact ackscrews, ackposts, loat ounts S 22759/ igtail Wire, Insulated ookup 200., in accordance with S S 22759/ igtail Wire, Uninsulated solder dipped in 63/37 tin-lead icro- ontact rrangements socket 5 socket 2 socket 25 socket socket 37 socket socket (special 2 row) 69 socket socket 5 socket 67 socket 75 socket socket Introduction IX Section igh-erformance icro- onnectors and ables Table of ontents Introduction Table of ontents Section Introduction ace View Socket onnector icro- ontact rrangements Specifications, rrangements and References Section 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected] etal Shell icro- for arnessing pplications Section etal Shell icro- for rinted ircuit oards Section Single Row ow rofile etal Shell icro- Section ow rofile etal and lastic Shell icro- Section ombo icro- for igh ower Section icro- ilter onnectors Section icro- ermetic onnectors Section Well-aster 260 igh Temperature icro- Section icro- Special pplications and odifications Section I-T-8353 onnectors and ardware Section icro- ackshells Section icro- Sav-on onnector Savers and ardware Section icro dgeoard / icro ircular onnectors Section atching icrostrips Index Introduction luminum lloy 606 In ccordance With S S---250/: lating code : cadmium with yellow chromate conversion coating in accordance with S-S---46, Type II, lass 3 lating code 4: black anodize in accordance with I Type II lass 2 lating code 5: gold plated in accordance with ST 488 over electroless nickel in accordance with ST lating code 6: chem film in accordance with I--554 lass 3 onnector Shell, lastic iquid crystal polymer, 30% glass-filled, in accordance with I Interfacial Seal luorosilicone rubber in accordance with iquid crystal polymer, 30% glass-filled or polyphenyl sulfide, 40% glass-filled in eryllium copper, gold plated in accordance with ST 488 Type II lass.27 (50 icroinches minimum) ode, over nickel underplate in accordance with hos bronze in accordance with ST 39 gold plated in accordance with ST 488 Type II lass.27 (50 icroinches minimum) ode, over nickel underplate in accordance with S-S---290, lass 2, (30-50 microinches). ncapsulant (otting) poxy resin, hysol 425/356 Stainless steel, 300 series, passivated in accordance with S S 2700 Wire Type : silver-coated copper wire, extruded ptfe insulation, 600 volts rms, 200 c., In accordance with 3 (Replaces I-W-6878/4) with S Wire Type : Silver-oated opper Wire, xtruded T insulation, 60 volts RS, Wire Type : high-strength silver-coated copper alloy wire, crosslinked modified T insulation, 600 volts rms, 200 c., In accordance with S S 22759/33 Wire inish ode 3: solid copper wire in accordance with , gold-plated, Wire inish ode 4: solid copper wire in accordance with , gold-plated 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected] art o. escription age I/RI Shield Sock Round able ntry ackshell wik-ty Strain Relief ackshell etal rotective overs with Silicone Rubber asket etal rotective overs with Silicone Rubber asket for Rear anel ounted icro I/RI lliptical anding ackshell etal rotective overs with Silicone Rubber askets otting Shell omposite I/RI Round able ntry ackshell I/RI ual ntry Round able anding ackshell I/RI Split Shell anding ackshell with Screwlocks Round able ntry Strain Relief ackshell with Saddle ar lamps Straight, Top, and 45 ntry I/RI lliptical anding ackshell I/RI lliptical Split Shell anding ackshell Saddle ar Strain-Relief ackshell I/RI lliptical etal Shell ackshell Side ntry I/RI ightweight etal Shell ackshell arshal ean rotective Rubber overs with Tether Rope ombo icro- ilter connector -34 T ack-to-ack able ssemblies -0 T Right ngle rinted ircuit oard eaders -3 T Solder up onnectors -3 T Insulated Wire onnectors -7 nvironmentally Sealed Rear anel ount onnector -23 R Insulated Wire with Right ngle xit onnector -2 asteratch atching icro- onnector -29 Solder up -3 re-wired -6 rinted ircuit oard onnector -9 R 7580 Vertical ount onnector -32 R 7580 ompact lange Vertical ount onnector -40 R 7590 Right ngle ount onnector -36 R 7590 ompact lange Right ngle ount -44 S Solder up, Solid Wire and Insulated Wire onnectors -2 S Right ngle onnectors -5 R Solder up Terminated Rear anel ount onnector -2 R Insulated-Wire Rear anel onnector -4 R Uninsulated Solid Wire Rear anel onnector onnector -6 R-R ondensed oard Right ngle, Rear anel ount onnector lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X Index-2 -ail: [email protected] art o. escription age R-S ondensed oard Straight, Rear anel ount onnector -2 SW Spacewire able ssembly with ack-to-ack or Single nded Wiring -27 Solder up ontacts -3 etal Shell Insulated Wire igtails -5 etal Shell Solid Wire Termination -7 etal Shell ack-to-ack ables -9 etal Shell Right ngle rinted ircuit oard - W lastic Shell Solder up Termination -5 W lastic Shell Insulated Wire igtails -7 W lastic Shell Solid Wire Termination -9 W lastic Shell ack-to-ack ables -2 W lastic Shell Right ngle -23 W Solder up onnector -8 W Insulated Wire onnector -0 W ack-to-ack Unshielded able ssemblies -2 W Shielded able ssemblies, Untwisted and Twisted air -4 W Uninsulated Wire onnector -9 W -R oard Right ngle, Thru-ole onnector -0 W2 Sav-on onnector Saver -2 W-S oard Straight, Vertical ount Thru-ole onnector -6 W-R ondensed oard Right ngle ount, Thru-ole onnector -4 W-S ondensed oard Straight.075 Inch Spacing onnector -20 W-SR Right ngle Surface ount onnector -28 W-28 Vertical ount ackplane onnector -3 W-28S Straddle ount ard-dge onnector -4 W-28S Right ngle oard onnectors -5 W-84 Vertical ount ackplane onnector -6 W-84S Straddle ount ard-dge onnector -7 W-84S Right ngle oard onnector -8 W2 re-wired and Solder up onnectors -9 W26 thru 29 uick isconnect icro ircular onnectors -0 nti-static Thermoplastic ust aps and luorosilicone Interfacial Seals -4 IX icro- art umber Index IX IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

4 Introduction roduct Selection uide igh-erformance icro- onnectors and ables Section : etal Shell icro- for arnessing pplications IX R Solder up -2 Shielded able ssembly -4 R Insulated Wire -4 W Uninsulated Wire -9 R Uninsulated Wire -6 R Insulated Wire -2 W Solder up -8 nvironmental -23 Section : etal Shell icro- for rinted ircuit oards R-S -2 R-R -4 W-S -6 W-R -0 W-R -4 W-S Surface ount -28 R R R R Section : Single Row ow rofile etal Shell icro- W Insulated Wire -0 SW SpaceWire -27 W ack-to- acks -2 asteratch -29 S Solder up -2 S re-wired -2 S Solid eads -3 S oard ount lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

5 roduct Selection uide igh-erformance icro- onnectors and ables Section : ow rofile etal and lastic Shell icro- Introduction etal Shell Solder up -3 W lastic Shell Solder up -5 etal Shell re- Wired -5 W lastic Shell re-wired -7 etal Shell Solid Wire -7 W lastic Shell Solid Wire -9 Section : ombo icro- for igh power etal Shell ackto-ack -9 W lastic Shell ack-to-ack -2 etal Shell Right ngle - W lastic Shell Right ngle -23 Solder up -3 re-wired -6 rinted ircuit oard -9 Solder up ilter onnector -7 Right ngle icro- ilter onnector -8 Rear anel ount ondensed oard Right ngle ilter onnector -28 Section : icro- ilter onnectors Vertical icro- ilter onnector -9 Insulated Wire ilter onnector -4 25S Receptacle ssembly In-ine ilter dapter -6 25S Receptacle ssembly 25S Receptacle ssembly Rear anel ount Solder up ilter onnector -22 dge oard icro- ilter onnector -30 Rear anel ount Vertical ilter onnector -24 ombo icro- ilter connector -34 Rear anel ount Insulated Wire ilter onnector -26 I Troubleshooter it for icro- onnectors -35 IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

6 pproved by: arryl akins Introduction roduct Selection uide igh-erformance icro- onnectors and ables Section : icro- ermetic onnectors IX Solder up, Tail, Insulated Wire -6 Shell Size 9-2, ront ount -8 Shell Size 37, ront ount -9 Section : Well-aster igh Temperature icro- Solder up, Tail, Insulated Wire - re-wired -7 ack-to-ack -0 Right ngle eader -3 Section : icro- Special pplications and odifications S/T IST-002: Instructions for arts Selection, Screening, ualification, and erating od 474 eying Option -2 od 497 round Spring -4 od od 429 Space rade -8 Round ntry -6 Section : I-T-8353 Solder up and re-wired onnectors and ardware etal Shell -4 lastic Shell -7 oard ount -0 ardware -26 Round ntry Split Shell anding ackshell -9 Section : icro- ackshells Round ntry raid Terminated ackshell -0 repared by: r. usum Sahu Reviewed by: r. enning eidecker ational eronautics and Space dministration oddard Space light enter reenbelt, aryland 2077 ay 2003 Round ntry omposite ackshell lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

7 roduct Selection uide igh-erformance icro- onnectors and ables Section : icro- ackshells (continued) Introduction lliptical ntry -4 lliptical Split anding ackshell -2 Section : icro- Sav-on onnector Savers and ccessories Strain Relief ackshell -23 otting Shell -26 Uni-Savers -2 Shorting lug ssemblies -3 nti-static ust aps -4 Interfacial Seals -4 etal overs -5 Rubber overs -9 ardware -0 Section : icro dgeoard and icro ircular W -2 W -0 Section : atching icrostrips Solder up -4 Solid Wire -6 re-wired -7 Right ngle Staggered -9 Vertical -9 Surface -3 ack-to-ack -5 IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

8 Introduction IX Recognized performance standards. very element of the I-T-8353 icro- is exactly controlled from terminal spacing to approved wire termination methods. The military standard defines contact resistance, dielectric withstanding voltage, corrosion resistance, shock and vibration tolerances and a wide range of other electrical, mechanical and environmental performance standards. Standardized measurement and test methodologies ensure consistent, predictable performance throughout this broad family of ruggedized, miniature connectors. 2 roven reliability under tough operating conditions. or applications where interconnect failure is simply not an option, the lenair high-reliability icro- offers a wealth of performance benefits which far outweigh any potential cost savings realized by specifying a lesser caliber connector. If downtime is a critical concern, other connectors cannot match the long-term durability and performance advantages of the I-T-8353 icro-, which include: igher current ratings ower circuit resistance Superior vibration and shock Optimized I/RI shielding roader operating temperature etter damage resistance nhanced corrosion resistance etter environmental sealing Six Reasons To Select a lenair igh- erformance icro- onnector... 3 The flexibility of easy customization. anufacturers of satellite communications systems, geophysical exploration devices, medical diagnostics and industrial equipment face many of the same packaging requirements for reduced size, weight and shape as do their military counterparts. nd the ability to design-in a wide range of custom modifications which fit the unique packaging requirements of these specialized applications is a distinct advantage of the lenair icro- making it the connector of choice for many unique or small quantity applications. 4 dvanced, high temperature tolerance. eat from electrical or environmental sources can soften mated contacts over time and reduce contact retention force. Under extreme conditions of shock and vibration this loss of normal retention can result in unstable resistance across the interconnect. This is the case for all types of contacts machined, drawn, stamped and twisted. ut materials selection, fabrication and heat treating techniques enable lenair s Twistin contact to resist high temperature stress relaxation for up to 000 hours at 25 º and thus perform at levels unmatched by other contact designs. 5 Trouble-free mating and un-mating. lenair has perfected a nickel underplating combined with a proprietary duplex gold overplating which provides optimal contact lubricity (anti-galling) and effectively eliminates the oxidation common to copper flash underplating. lenair s advanced plating process contributes to the overall durability of the connector by reducing contact engaging and separating forces. 6 ast Turnaround and Same- ay vailability. re the icro- connectors and accessories you need either in stock or able to be manufactured in a short period of time? lenair has built its reputation on fast turnaround andcan deliver Twistin products from discrete connectors to completeassemblies faster than anyone else inour business.we maintainthe world slargest inventory of icro- connectors and accessories, all available for immediate shipment with no quantity or price minimums. 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

9 ot ll icro- s re reated qually S even oints of lectrical ontact The Twistin size #24 contact has seven strands of eu wire surrounding three filler strands. ach strand makes contact with the socket, assuring low resistance, plenty of contact wipe, and excellent shock and vibration performance. W hat sets our pins apart This unretouched photograph shows important differences between the Twistin and stamped pins. Stronger ront nd oth types of contacts meet the requirements of I-T ut only the Twistin offers a stronger frontend with its seven points of contact, high normal force and better resistance to vibration Split Tine ontact System Stamped in The I-T-8353 and I-T-3239 specifications define the minimum acceptable performance levels for icro- and anominiature connectors. While the specs are rigid in their performance benchmarks, manufacturers are given considerable leeway when it comes to contact design, crimp fabrication, contact finish and material selection. Stamped and formed contacts, for example, are widely used in icro-d connectors due to their lowcost and ease of manufacture. ut independent testing clearly shows that Twistin style contacts provide superior performance in such areas as high temperature tolerance, contact retention and crimp strength. If you have already made the decision to use either a icro- or ano sized connector because its ruggedized performance outweighs the potential cost-savings realized in a lesser-caliber connector, then you owe it to yourself to understand the very real differences between stamped pins and the lenair Twistin ontact System. etter rimp oint icro- connectors are factoryterminated to wire. oard mount and insulated wire pigtails have crimp joints where the wire attaches to the contact. icro- crimp joints are concealed with epoxy potting. The icro- is unique among high reliability mil spec connectors because the mil spec allows stamped crimp barrels and does not specify that the crimping process must use mil spec crimp tools. The thin sheet metal in the stamped pin cannot produce a satisfactory gas-tight crimp joint, so spot welding is required to reduce the chance of failure. lenair Twistin 8 Indent il Spec rimp oint rimp With Spot Weld Split-Tine ontact Systems The socket contact is made by machining a copper alloy tube, then cutting a longitudinal slot. The contact is then crimped to bend the tines together. The smallest split tine contact systems are used in connectors with.075 inch spacing. The Twistin offers improved vibration performance and higher contact density. Introduction IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

10 Introduction IX The lenair Twistin ontact icroin anoin uestion: Why choose a Twistin connector? nswer: esign lexibility and Reliable erformance If reliability and performance were the only considerations in the design of a micro contact system, everyone would opt for a Twistin contact and a machined socket and crimp sleeve. ut cost and ease of manufacture are significant issues as well, which is why stamped and formed contacts, as well as split-tine contacts, are still widely used. The lenair Twistin ontact System provides a superior wire attachment which translates to lower contact resistance and it does so under extreme conditions of vibration, shock and high heat. n additional key benefit of the Twistin contact is the ease of designing a custom package to fit your exact needs. The precision machined components can be readily integrated into a wide range of connector package envelopes. Twistin ontacts The Twistin contact is made with a bundle of beryllium copper wires welded at the tip to form a semispherical radius and bulged to create a spring. onnector Shell Socket ontact Rubber Seal Insulator Rigid poxy ncapsulant onnector Shell Rigid poxy ncapsulant #24 to #30 W Wire Twistin ontact Insulator t-a-lance Inside a icro- Twistin onnector 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

11 our Reasons to Select lenair for Your ext icro/ ano lex ircuit roject 2ull Spectrum roduct Offering lenair offers a complete range of miniaturized printed circuit board connectors with highreliability Twistin contacts. We supply both through-hole and surface mount designs in every angle and mounting style for integration into single-sided, double-sided and multilayered flex circuitry. 4 Termination xpertise lenair s experienced workforce is trained and qualified to produce consistently reliable circuit terminations using the most advanced techniques and technologies, including automated solder reflow systems. Unsurpassed xperience in icro/ ano lex ircuit roduction lenair has been integrating icro- and anominiature connectors into flex circuitry for over 30 years. Our technical capabilities include design and layout of turnkey assemblies as well as the production of custom-configured micro and nano interconnects for maximum size and weight savings. 3pplication esign Our turnkey icro- and anominiature flex circuit assemblies are produced to exacting specifications. ustomer-supplied designs are reviewed and revised to insure the most advantageous utilization of I shielding, polarization, strain-relief and connector packaging technologies. t lenair, the final design solution is optimized to meet the exact mechanical and electronic requirements of the application environment. Introduction IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

12 Introduction icro- Specifications IX onnector Shell, etal onnector Shell, lastic Terminal lock, ( & S) Interfacial Seal in ontact (Twistin) Socket ontact ncapsulant (otting) ackscrews, ackposts, loat ounts igtail Wire, Insulated ookup igtail Wire, Uninsulated icro- Standard aterials and inishes luminum lloy 606 In ccordance With S S---250/: lating code : cadmium with yellow chromate conversion coating in accordance with S-S---46, Type II, lass 3 lating code 2: electroless nickel in accordance with ST 733 lating code 4: black anodize in accordance with I Type II lass 2 lating code 5: gold plated in accordance with ST 488 over electroless nickel in accordance with ST lating code 6: chem film in accordance with I--554 lass 3 lating code 33: nickel-ptfe in accordance with Stainless Steel, 300 Series: lating ode 3: assivated In ccordance With S S 2700 iquid crystal polymer, 30% glass-filled or polyphenyl sulfide, 40% glass-filled in accordance with I iquid crystal polymer, 30% glass-filled or polyphenyl sulfide, 40% glass-filled in accordance with I luorosilicone rubber in accordance with eryllium copper, gold plated in accordance with ST 488 Type II lass.27 (50 icroinches minimum) ode, over nickel underplate in accordance with S S---290, class 2, (30-50 microinches). hos bronze in accordance with ST 39 gold plated in accordance with ST 488 Type II lass.27 (50 icroinches minimum) ode, over nickel underplate in accordance with S-S---290, lass 2, (30-50 microinches). poxy resin, hysol 425/356 Stainless steel, 300 series, passivated in accordance with S S 2700 Wire Type : silver-coated copper wire, xtruded T insulation, 600 volts rms, 200 c., In accordance with 3 (Replaces I-W-6878/4) with S S 22759/ Wire Type : Silver-oated opper Wire, xtruded T insulation, 60 volts RS, 200., in accordance with S S 22759/ Wire Type : high-strength silver-coated copper alloy wire, crosslinked modified T insulation, 600 volts rms, 200 c., In accordance with S S 22759/33 Wire inish ode 3: solid copper wire in accordance with , gold-plated, solder dipped in 60/40 tin-lead Wire inish ode 4: solid copper wire in accordance with , gold-plated 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

13 icro- Specifications Introduction SO. Scope. This specification covers performance requirements for lenair icro- connectors manufactured in accordance with I-T escription. W plastic and W metal shell icro- connectors on.050 inch (.27 mm) centers, with Twistin contacts. 2 ORR O R 2. Order of precedence. In the event of a conflict between the requirements of this specification and the references cited herein, this document takes precedence.the requirements set forth in customer specifications and lenair detail drawings shall take precedence over this document. 3 RUIRTS 3. lectrical erformance Requirements. 3.. Insulation resistance. 5,000 megohms minimum between any pair of contacts and any contact and the shell when tested in accordance with I-364 rocedure 2, which specifies 500 volts ielectric withstanding voltage ielectric withstanding voltage (sea level). 600 volts ac, rms 60 z. onnectors shall show no evidence of breakdown or flashover when subjected to the WV test of I-364 rocedure ielectric withstanding voltage (70,000 feet). 50 volts ac, rms 60 z. onnectors shall show no evidence of breakdown or flashover when subjected to the WV test of I-364 rocedure ontact resistance icro- erformance Specifications ontact resistance (8353 roup qualification). The voltage drop of a mated pair of contacts attached to wires shall not exceed the values shown when tested in accordance with I-T-8353 aragraph 4.5.8, using 2.5 amps test current. Wire 22759/ / gage Voltage rop (mv) 65 aximum 75 aximum 60 aximum ontact resistance (lot acceptance testing). The voltage drop across a mated pair of contacts shall not exceed 8 millivolts when tested in accordance with I , using a test current of one ampere ± 2%. If the connector under test is wired, the calculated resistance across the contacts shall not exceed 8 milliohms when the maximum specified wire resistance per foot is subtracted from the total resistance ow signal level contact resistance. When tested with a micro-ohmeter using a test current of 00 milliamperes maximum and 20 millivolts open circuit maximum, the resistance of a mated pair of contacts shall be 32 IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

14 Introduction icro- Specifications IX milliohms maximum. Test procedure shall be in accordance with I ontact current capability. ontacts shall be capable of carrying 3.0 amperes in continuous duty operation from -55. to +50. when tested in accordance with I Shell-to-shell conductivity. mated pair of nickel-plated metal shell icro- connectors fitted with an optional grounding spring on the plug shell mating face, shall not exceed 0 millivolts maximum voltage drop when tested in accordance with I Shielding effectiveness. mated pair of metal shell icro- connectors fitted with an optional grounding spring on the plug shell mating face shall meet a requirement of 65 d minimum attenuation when tested in accordance with I agnetic permeability. agnetic permeability, when tested in accordance with I , shall not exceed 2 mu. 3.2 echanical Requirements icro- erformance Specifications 3.2. ontact engaging and separation force. aximum engaging force shall be 6.0 ounces when tested in accordance with I , except with a.022 ±.000 diameter sleeve with a 6-0 microfinish. inimum separation force shall be 0.5 ounces when tested in accordance with I , except with a.0230 ±.000 diameter sleeve with a 6-0 microfinish onnector mating and unmating force. The maximum mating and unmating force shall not exceed a value equal to 0 ounces times the number of contacts, when tested per I ate connectors three times before initial measurements are taken ontact retention. ontacts, when tested in accordance with I , shall withstand a 5 pound axial load for a minimum of 5 seconds, with a maximum allowable displacement of.005 inch rimp tensile strength. Wire shall not break or pull out of crimp joints at less than the specified force when tested in accordance with I Wire age orce in ounds 22759/ / / / / / / Insert retention. Inserts shall not be dislodged or moved from their original position when subjected to an axial load of 50 pounds per square inch when tested in accordance with I Resistance to soldering heat. onnectors with solder cup contacts shall not be damaged following soldering with a 360. solder iron for at least 4 seconds in accordance with I rocedure. onnectors with printed circuit board terminations shall withstand immersion in a solder bath for 9- seconds at 260. when 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

15 icro- Specifications Introduction tested in accordance with I rocedure 3 Test ondition. onnectors, after cooling, shall not exhibit damage or warpage when examined at 0X magnification Solderability. Solder cup and printed circuit terminals shall meet the solderability requirements of I-ST-202 ethod urability. icro- connectors shall be capable of 500 cycles of mating with no damage or degradation to electrical performance. ngaging and separation force and mating forces shall not exceed the requirements of 3.2. and nvironmental Requirements icro- erformance Specifications 3.3. Salt spray (corrosion). onnectors shall show no exposure of base metal due to corrosion when subjected to the salt spray test of I In addition, connectors shall meet contact resistane, lw circuit level contact resistance and mating force requirements. Shell material, finish (code) I test condition uration (hours) luminum, cadmium plating (0) 96 (48 for 8353) luminum, electroless nickel plating (02) 48 luminum, black anodize (04) 48 luminum, chem film (06) 48 luminum, gold (05) 48 Stainless steel, passivated (03) 000 (48 for 8353) ickel, T (33) T 500 (48 for 8353) luid immersion. onnectors shall meet mating force requirements following 20 hours immersion in synthetic lubricating oil and hour immersion in coolanol 25, when tested in accordance with I-T-8353 paragraph Thermal vacuum outgassing. The assembled connector mass excluding metallic parts shall not exceed.0% total mass loss (T) or 0.% total volatile condensible materials (V) when tested in accordance with ST 595. OT: the interfacial seal on metal shell W receptacle connectors slightly exceeds the allowable V unless it is specially processed. This is acceptable per I-T-8353 but may not be permissible for specific space programs. IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

16 Introduction icro- Specifications IX Outgassing properties of icro- conponents omponent aterial rand ame Thermoplastic Insulators and, Trays iquid rystal olymer or olyphenyl Sulfide %Toatal ass oss (T) %ollected Volatile ondensable material (V) Vectra Test Report S Test #S74 78 otting ompound poxy ysol lenair Test Interfacial Seal as received luorosilicone (none) lenair Test Interfacial Seal with Oven akeout 8 hrs luorosilicone (none) lenair Test Interfacial Seal with Thermal Vacuum akeout24 hrs. 25. luorosilicone (none) lenair Test Wire Tefzel Tefzel S Test #S Thermal shock. Unmated connectors shall withstand 5 cycles of thermal shock with a minimum temperature of -65. and a maximum temperature of 50. when tested in accordance with I , ondition IV. onnectors shall not exhibit any detrimental damage or degradation of electrical performance umidity icro- erformance Specifications umidity, W connectors with interfacial seals. Wired, mated connectors shall be subjected to humidity conditioning in accordance with I-364-3, Test ondition IV. fter a minimum of 3 hours of step 7a of the final cycle, and while the connectors are still subjected to high humidity, the insulation resistance shall be measured when the chamber temperature reaches 20 ± 5. Insulation resistance shall not be less than 00 megohms, and connectors shall pass a WV test of 360 volts (rms 60 hertz ac) umidity, W plastic connectors without interfacial seals. Wired, mated connectors shall be subjected to humidity conditioning in accordance with I-364-3, Test ondition IV. On completion of step 6 of the final cycle, connectors shall be removed from the chamber, unmated and surface moisture removed. onnectors shall meet megohm minimum and shall pass a WV test of 00 volts (rms 60 hertz ac) Vibration (sine). onnectors, when mated, wired in series and fixtured in accordance with I-T-8353, shall not exhibit any discontinuity longer than microsecond when tested in accordance with I Test ondition IV, which specifies 2 hour duration, 0 z to 2000 z, and amplitude of 20 g n peak. onnectors shall not be damaged and no loosening of parts shall occur Shock. onnectors, when mated, wired in series and fixtured in accordance with I-T-8353, shall not exhibit any discontinuity longer than microsecond when tested in accordance with I , Test ondition, which specifies an amplitude of 50 g peak. onnectors shall not be damaged and no loosening of parts shall occur arking ermanency. onnector marking shall meet the requirements of I-ST-202 ethod ungus resistance. onnector materials shall meet the requirements of I-ST-80 ethod lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

17 icro- Weights Introduction icro- etal Shell Weights In rams ayout Solder up igtail2 R R S S S S S S S S S S S S S S S ominal weight shown. dd 0% for maximum weight. 2. Weight is connector only. See table below for wire weight calculation. Stainless Steel icro- Weight dders ayout Stainless Steel dder in rams 9.9 9S S S S S S S S S S S S S.5 ow To alculate Weights for ifferent Wire Types and engths Wire Type Wire age (W) aximum Wire Weight er Inch in rams 22759/ / / / / / / X UTIO: W (54 inches of 22759/ #26 gage wire). ind the connector weight in the igtail column above g. 2. ind the wire weight in grams per inch g./in. 3. ultiply the # of conductors times length and weight 37 wires x 54 inches x.072 g./in. =...44 g. 4. dd the connector weight to the wire weight g.. ominal weight shown. dd 0% for maximum weight. 2. Weight includes 8 inches of 22759/-26 insulated #26 W copper wire. IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

18 Introduction icro- ontact rrangements pin 5 pin 2 pin 25 pin pin 37 pin pin (special 2 row) pin ace View in onnector icro- ontact rrangements pin pin pin pin pin IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

19 icro- ontact rrangements Introduction socket 5 socket 2 socket 25 socket 3 socket 37 socket 5 socket (special 2 row) 69 socket ace View Socket onnector icro- ontact rrangements socket socket socket socket socket IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

20 Introduction icro- anel utouts IX ayout In. ±.003 ront anel ounting lastic Shell W onnectors (8353/06 Thru /09) Recommended ating a imension Rear anel ounting ± 0.08 In. ±.002 ± 0.05 In. ±.002 ± 0.05 In. ±.002 ± 0.05 In In. ± ayout In. ±.003 Ø etal Shell W onnectors ± 0.08 In. ±.002 ± 0.05 Recommended icro- anel utouts 4 x R.062 (.6) In. ±.002 ± /.26 (5.08 ± 0.27) In. ±.002 Ø ± 0.05 In. ±.005 ± 0.3 etric dimensions (mm) are indicated in parentheses. 4 x R.062 (.6) In. ±.002 ± 0.05 ± lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

21 I-ST-68 olor ode hart Introduction I O. I-ST-68 O UR ase olor I-ST-68 olor ode hart for icro- onnectors irst Stripe Second Stripe I O. I-ST-68 UR. ase olor irst Stripe WT R VIO 2 R WT R RY 3 2 R WT U VIO 4 3 OR WT U RY 5 4 Y WT VIO RY Second Stripe 6 5 R WT R R 7 6 U WT R OR 8 7 VIO WT R Y 9 8 RY WT R R 0 9 WT WT R U 90 WT WT R VIO 2 9 WT R WT R RY 3 92 WT R WT R OR 4 93 WT OR WT R Y 5 94 WT Y WT R R 6 95 WT R WT R U 7 96 WT U WT R VIO 8 97 WT VIO WT R RY 9 98 WT RY WT OR Y WT R WT OR R WT R WT OR U WT OR WT OR VIO WT Y WT OR RY WT R WT Y R WT U WT Y U WT VIO WT Y VIO WT RY WT Y RY WT R R WT R U WT R OR WT R VIO WT R Y WT R RY 3 95 WT R R WT U VIO WT R U WT U RY WT R VIO WT VIO RY WT R RY WT R R OR WT R OR WT R R Y WT R Y WT R R R WT R R WT R R U WT R U WT R R VIO WT R VIO WT R R RY WT R RY WT R OR Y WT OR Y WT R OR R WT OR R WT R OR U WT OR U WT R OR VIO WT OR VIO WT R OR RY WT OR RY WT R Y R WT Y R WT R Y U WT Y U WT R Y VIO WT Y VIO WT R Y RY WT Y RY WT R R U WT R U WT R R VIO Third Stripe IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

22 Introduction Reference ata IX Wire ode Specification Insulation onductor 3-X 22759/ / Wire ode olor ode xtruded T xtruded cross-linked modified T xtruded T White 2 Yellow Silver-coated copper Silver-coated high-strength copper alloy Silver-coated copper Table 3: Standard Wire Specifications Operating Temp. -65 to to to +200 Voltage Rating 600 volts RS 600 volts RS 600 volts RS W Table 4: Stocked Wire Sizes and olors Strands ax. onductor iameter (Inches) Resistance Ohms/000 t. ax. inished Wire ia. #24 7/ #26 7/ #28 7/ #30 7/ #24 9/ #26 9/ #28 7/ #30 7/ #24 9/ #26 9/ #28 7/ Wire Insulation olor #24 W #26 W #28W #30 W 5 White with I-ST-68 color stripes not available not available 7 0 olor Repeat White 2 Yellow 5 White with I-ST-68 color stripes not available not available 7 0 olor Repeat White not available 2 Yellow not available 5 White with I-ST-68 color stripes not available not available 7 0 olor Repeat not available = Stocked wire. = Stocked wire through 5 colors only. onnectors with more than 5 contacts are not available with striped wire. 0 color repeating is the recommended alternate. 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

23 RoS ompliance Information Introduction re icro- onnectors RoS compliant? The products in this catalog can be ordered with various plating finishes. Some of these finishes such as cadmium and chem film, along with solder-dipping, do not comply with the RoS directive. Why doesn t lenair eliminate non-ros products? lenair products are typically used in defense and aerospace equipment exempt from RoS requirements. lenair will continue to offer cadmium and chromate finishes in accordance with o and aerospace specifications. Our part numbers contain a broad range of plating finish ordering codes. ustomers can easily specify RoS compliant finishes if desired. Twistin onnectors and RoS ompliance uropean Union irective 2002/95/ on Restriction of the use of certain azardous Substances ( RoS ) states that certain types of equipment (primarily consumer electronic products such as personal computers) shall not contain lead, mercury, cadmium, hexavalent chromium, s or s. or the record, lenair does not produce any O products of this type. urthermore, our interconnect components are either free of the substances RoS controls, or specifically intended for use in military-aerospace applications that are exempt. akers of consumer products should refer to the following guidelines to insure lenair interconnect components are correctly specified when used in in RoS regulated electronic equipment. roducts that do not comply with RoS regulations: admium plating is available on metal shell connectors in this catalog. ote that cadmium plating does not currently comply with RoS rules. 2hem film is available on metal shell connectors.this coating contains hexavalent chromium which does not currently comply with RoS rules. 3Tin-lead solder dipped printed circuit board tails. oard mount 8353 icro- s and other products are normally solder dipped in 63% tin 37% lead molton solder. RoS compliance for consumer products requires elimination of solder coatings containing lead. RoS compliance made easy Specify electroless nickel plating on the connector shell. Or, choose stainless steel shells for maximum corrosion protection and RoS compliance. 2Use od ode 53 on icro- board mount connectors. oard mount icro- s and other products are normally solder dipped in 63% tin 37% lead molton solder. ny solder-dipped part can be supplied with RoS compliant gold-plating instead simply by adding od ode 53 as a suffix to the standard part number. icro- ROS ompliance xamples art umber roblem Solution RoS ompliant art umber W-37S W2-25SR-.0 W6-9S /03-07 lating code specifies cadmium plating. R style connectors are solderdipped in tin-lead. lating code 6 specifies chem film. admium plated shell and solderdipped contacts. hange to electroless nickel plating (code 2). dd od ode 53 to change the tail finish to gold plating. hange to electroless nickel plating (code 2). hange to nickel plating and gold contacts W2-37S W2-25SR W2-9S /03-05 IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

24 Introduction RoS ompliance Information icro- lating ode, icro- onnector lating odes: ROS ompliance lating Type RoS ompliance otes admium with yellow chromate conversion coating over electroless nickel 2, lectroless nickel 3, Stainless steel shell, passivated o lectroless nickel is the preferred alternate. irst choice for RoS compliance. ood corrosion resistance, excellent conductivity, 8353 approved, always in stock. igher cost but unsurpassed corrosion resistance, not conductive enough for typical I needs. uild-to-order. 4, lack anodize over aluminum conomical, non-reflective, non-conductive. uild-to-order. 5, old over aluminum ow volume, higher cost, excellent conductivity. uild-to-order. 6, hem film o lectroless nickel is the preferred alternate. 33, T ickel-t lenair s 500 our rey meets the need for a cadmium replacement with excellent conductivity, wear resistance and corrosion protection, 8353 approved. icro- ackshell lating odes: ROS ompliance lating ode lating Type RoS ompliance otes admium with yellow chromate conversion coating over electroless nickel o lectroless nickel is the preferred alternate. lectroless nickel irst choice for RoS compliance. ood corrosion resistance, excellent conductivity, 8353 approved, always in stock. lack anodize Inexpensive, non-reflective, not suitable for I (poor conductivity), build-to-order. Z2 old ow volume, higher cost, excellent conductivity, build-to-order. hem film o lectroless nickel is the preferred alternate. T ickel-t lenair s 000 our rey meets the need for a cadmium replacement with excellent conductivity, wear resistance and corrosion protection, 8353 approved. admium with olive drab chromate conversion coating over electroless nickel o lectroless nickel is the preferred alternate. IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

25 Section icro- etal Shell onnectors for arness pplication icro- arness R Solder up age -2 R-Insulated Wire age -4 R Uninsulated Wire age -6 W Solder up age -8 W Insulated Wire age -0 W ack-to-ack age -2 W Shielded able age -4 W Uninsulated Wire age -9 R Insulated Wire age -2 nvironmental age -23 SW SpaceWire ssembly age -27 asteratch Insulated Wire -29 roduct Selection uide R Solder up Rear anel ount onnector R Insulated Wire Rear anel ount onnector R Uninsulated Wire Rear anel ount onnector W Solder up onnector W Insulated-Wire onnector W ack-to-ack Unshielded able W Shielded able ssemblies W Uninsulated Wire onnector R Right ngle xit with Insulated Wire onnector nvironmentally Sealed onnector SW SpaceWire ssembly asteratch IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

26 icro- arness icro- R Solder up Terminated Rear anel ount onnectors with Wide lange IX onnector Shell Insulator Interfacial Seal in ontact Socket ontact ardware ncapsulant aterials and inishes luminum lloy 606 or Stainless Steel, 300 Series, passivated. See Ordering Info for lating Options iquid rystal olymer () or olyphenylene Sulffide (S) luorosilicone Rubber, lue eryllium opper old over ickel lating opper lloy old Over ickel lating 300 Series Stainless Steel poxy Resin ysol 425 ow To Order Solder up Rear anel ount onnector Sample art umber R 2-5 S S R3 Series Shell aterial and inish R lenair Rear anel icro luminum Shell - admium 2 - ickel 4 - lack nodize 5 - old 6 - hem ilm Stainless Steel Shell 3 - assivated - or S Insulator aterial - 30% lass-filled liquid crystal polymer S - 40% lass-filled polyphenylene sulfide ontact ayout 9, 5, 2, 25, 3, 37, 5-2, 5, 69, 75, 00 (See Table I) ontact Type Standard Sizes Size #24 Solder up in S Socket - in T - Socket Termination Type S - Solder up Rear anel ount ardware Option - o hardware R panel R panel R panel R panel R panel R panel O-Ring - onductive - on onductive (itrile) otes:. ssembly to be identified with lenair s name, part number, date code, and pin identification 2. erformance data per I-T Interface dimensions per I-T-8353 icro- Solder up Termination These connectors feature gold-plated Twistin contacts for best performance. Use with #26 W or smaller wire. Specify nickel-plated shells or cadmium plated shells for best availability. ow vailable with #24 W ontact 24 W wire offers increased mechanical strength and lower voltage drop. lenair icro- solder cup connectors are now compatible with 24 W stranded or solid wire. Specify for 24 W pin contacts or T for 24 W socket contacts erformance Specifications urrent Rating 3 WV 600 V Sea level Insulation Resistance 5000 egohms inimum ontact Resistance 8 illiohms aximum ow evel ontact Resist. 32 illiohms aximum agnetic ermeability 2 µ aximum Operating Temperature -55. to +50. Shock, Vibration 50 g., 20g. ating orce (0 Ounces) X (# of ontacts) 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

27 icro- R Solder up Terminated Rear anel ount onnectors with Wide lange icro- arness Table I: imensions.0 ax. Size 9-37 nd 5-00 Outer Rows.200 ax Size 5-00 Inner Rows ax in Skt ax ayout in. ±.005 ax ax ax ax Ref ax ±.3 in. ±.003 ±.08 in. in. ±.005 ±.3 in. in. ±.003 ±.08 in. ±.005 ±.3 in. in. in. in S S S S S S S S S S S IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

28 icro- arness icro- R Insulated-Wire Rear anel ount onnector with Wide lange IX onnector Shell Insulator Interfacial Seal in ontact Socket ontact ardware ncapsulant aterials and inishes luminum lloy 606 or Stainless Steel, 300 Series, passivated. See Ordering Info for lating Options iquid rystal olymer () or olyphenylene Sulffide (S) luorosilicone Rubber, lue eryllium opper old over ickel lating opper lloy old Over ickel lating 300 Series Stainless Steel poxy Resin ysol 425 icro- re-wired igtails These connectors feature gold-plated Twistin contacts and mil spec crimp termination. Specify nickelplated shells or cadmium plated shells for best availability. 00% tested and backpotted, ready for use. hoose the Wire Type and Size To it Your pplication If onhand availability is most important, choose #26 W Type mil spec Teflon wire. Select 22759/33 Type for space applications. ow To Order Insulated Wire Rear anel ount onnector Sample art umber R R3 Series Shell aterial and inish R lenair Rear anel icro luminum Shell - admium 2 - ickel 4 - lack nodize 5 - old 6 - hem ilm Stainless Steel Shell 3 - assivated - or S Insulator aterial - 30% lass-illed iquid rystal olymer S - 40% lass-illed olyphenylene Sulfide ontact ayout 9, 5, 2, 25, 3, 37, 5-2, 5, 69, 75, 00 (See Table I) ontact Type in S Socket Wire age 4 - # # # #30 (T) Wire Only 22759/ VRS Teflon (T) Stranded Wire Type 22759/ VRS odified ross-inked Tefzel VRS (6878/4) Stranded Wire olor - White 2 - Yellow 5 - ull olor 7-0 olor Repeat Stranded Wire ength 8-8 inches Rear anel ount - o ardware R panel R panel ardware Option R panel R panel R panel R panel O-Ring - onductive - on onductive (itrile) otes:. ssembly to be identified with lenair s name, part number, date code, and pin identification 2. erformance data per I-T Interface dimensions per I-T-8353 erformance Specifications urrent Rating 3 WV 600 V Sea level Insulation Resistance 5000 egohms inimum ontact Resistance 8 illiohms aximum ow evel ontact Resist. 32 illiohms aximum agnetic ermeability 2 µ aximum Operating Temperature -55. to +50. Shock, Vibration 50 g., 20g. ating orce (0 Ounces) X (# of ontacts) 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

29 icro- R Insulated-Wire Rear anel ount onnector with Wide lange icro- arness Table I: imensions ayout in. ±.005 ax ax ax ax Ref ±.3 in. ±.003 ±.08 in. in. ±.005 ±.3 in. in. ±.003 ±.08 in. ±.005 ±.3 in. in. in S S S S S S S S S S S IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

30 icro- arness icro- R Uninsulated Wire Rear anel ount onnector with Wide lange IX onnector Shell Insulator Interfacial Seal in ontact Socket ontact ardware ncapsulant aterials and inishes luminum lloy 606 or Stainless Steel, 300 Series, passivated. See Ordering Info for lating Options iquid rystal olymer () or olyphenylene Sulffide (S) luorosilicone Rubber, lue eryllium opper old over ickel lating opper lloy old Over ickel lating 300 Series Stainless Steel poxy Resin ysol 425 igh erformance These connectors meet the demanding requirements of I-T Solder-ipped Terminals are coated with Sn60/b40 tin-lead solder for best solderability. Optional gold-plated terminals are available for RoS compliance ow To Order Uninsulated Wire Rear anel ount onnector Sample art umber R R3 Series Shell aterial and inish Insulator aterial R lenair Rear anel icro luminum Shell - admium 2 - ickel 4 - lack nodize 5 - old 6 - hem ilm Stainless Steel Shell 3 - assivated - or S - 30% lass-illed iquid rystal olymer S - 40% lass-illed olyphenylene Sulfide ontact ayout 9, 5, 2, 25, 3, 37, 5-2, 5, 69, 75, 00 (See Table I) ontact Type in S Socket Wire age 4 - #24 (.020) 5 - #25 (.08) 6 - #26(.06) Wire Type - Solid opper Termination inish 3 - Solder ipped 4 - old Wire ength.25,.250,.375,.500,.750,.000 Rear anel ount ardware Option - o hardware R panel R panel R panel R panel R panel R panel O-Ring - onductive - on onductive (itrile) otes:. ssembly to be identified with lenair s name, part number, date code, and pin identification 2. erformance data per I-T Interface dimensions per I-T-8353 erformance Specifications urrent Rating 3 WV 600 V Sea level Insulation Resistance 5000 egohms inimum ontact Resistance 8 illiohms aximum ow evel ontact Resist. 32 illiohms aximum agnetic ermeability 2 µ aximum Operating Temperature -55. to +50. Shock, Vibration 50 g., 20g. ating orce (0 Ounces) X (# of ontacts) 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

31 icro- R Uninsulated Wire Rear anel ount onnector with Wide lange icro- arness Table I: imensions ayout in. ±.005 ax ax ax ax Ref ±.3 in. ±.003 ±.08 in. in. ±.005 ±.3 in. in. ±.003 ±.08 in. ±.005 ±.3 in. in. in S S S S S S S S S S S IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

32 icro- arness icro- W Solder up etal Shell onnectors icro- Solder up Termination These connectors feature gold-plated Twistin contacts for best performance. Use with #26 W or smaller wire. Specify nickel-plated shells or cadmium plated shells for best availability. ow vailable with #24 W ontacts W 24 wire offers increased mechanical strength and lower voltage drop. lenair icro- solder cup connectors are now compatible with 24 W stranded or solid wire. Specify for 24 W pin contacts, or T for 24 W socket contacts. ow To Order Solder up onnectors Sample art umber mwdm 2 l- 37 s s b Series Shell aterial and inish Insulator aterial ontact ayout ontact Type Termination Type W lenair icro- luminum Shell - admium 2 - ickel 4 - lack nodize 5 - old 6 - hem ilm - or S - 30% lass-illed iquid rystal olymer S - 40% lass illed olyphenylene Sulfide 9, 5, 2, 25, 3, 37, 5, 5-2, 67, 69, 75, 00, 30 (See Table II) Size #26 Solder up ontacts (Standard) - in S - Socket S - Solder up ardware,,,, S, S,,,, R, (See Table I) Stainless Steel Shell 3 - assivated Size #24 Solder up ontacts - in T - Socket Table I: ounting ardware S S R Thru-ole ackpost ex ead ackscrew ex ead ackscrew, xtended Slot ead ackscrew Slot ead ackscrew, xtended ex ead ackscrew on- Removable Slot ead ackscrew on- Removable xtended loat ount or ront anel ounting loat ount or Rear anel ounting Threaded Insert IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

33 icro- W Solder up etal Shell onnectors icro- arness ayout In. Table II: imensions ax. ax. ax. ax. ax. ax. ax OTTS:.096/.088 (2.43/2.23) I OTTS:.5/.45 (3.8/3.68) I. In. ±.003 ± 0.08 In. In. In. In. ±.003 ± 0.08 In. In. In S S S S S S S S S S S S S erformance Specifications urrent Rating 3 WV 600 V Sea level Insulation Resistance 5000 egohms inimum ontact Resistance 8 illiohms aximum ow evel ontact Resist. 32 illiohms aximum agnetic ermeability 2 µ aximum Operating Temperature -55. to +50. Shock, Vibration 50 g., 20g. ating orce (0 Ounces) X (# of ontacts) onnector Shell Insulator Interfacial Seal in ontact Socket ontact ardware ncapsulant.093 ±.005 (2.36 ± 0.3) aterials and inishes.200 (5.08) X.0 (2.79) X luminum lloy 606 or Stainless Steel, 300 Series, passivated. See Ordering Info for lating Options iquid rystal olymer ()/ olyphenylene Sulfide(S) luorosilicone Rubber, lue eryllium opper old over ickel lating opper lloy old Over ickel lating 300 Series Stainless Steel poxy Resin ysol 425 IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

34 icro- arness icro- W Insulated Wire etal Shell onnectors icro- Insulated Wire igtails These connectors feature gold-plated Twistin contacts and mil spec crimp termination. Specify nickel-plated shells or cadmium plated shells for best availability. 00% tested and backpotted, ready for use. hoose the Wire Type and Size To it Your pplication If on-hand availability is most important, choose #26 W Type mil spec Teflon wire. Select 22759/33 Type for space applications. Table I: ounting ardware S S R Thru-ole ackpost ex ead ackscrew ex ead ackscrew, xtended ow To Order Insulated Wire onnector Sample art umber W 2-25 S Series Shell aterial and inish Insulator aterial ontact ayout W lenair icro- luminum Shell - admium 2 - ickel 4 - lack nodize 5 - old 6 - hem ilm ontact Type - in S - Socket - or S - 30% lass-illed iquid rystal olymer S - 40% lass filled polyphenylene sulfide Slot ead ackscrew Stainless Steel Shell 3 - assivated 9, 5, 2, 25, 3, 37, 5, 5-2, 67, 69, 75, 00, 30 (See Table II) Wire age (W) 4 - # # # #30 ( wire type only) Wire Type Wire olor Wire ength Inches 22759/ 600 VRS Teflon (T) 22759/ VRS odified ross- inked Tefzel (T) White 2 Yellow 5 olor-oded Stripes er I-ST-68 (up to 5 colors) 7 Ten olor Repeating 8 - Wire ength In Inches. 8 Specifies 8 Inches. ardware,,,, S, S,,,, R, (See Table I) Slot ead ackscrew, xtended VRS Type 6878/4 (T) ex ead ackscrew on- Removable Slot ead ackscrew on- Removable xtended loat ount or ront anel ounting loat ount or Rear anel ounting Threaded Insert IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

35 icro- W Insulated Wire etal Shell onnectors icro- arness ayout In. Table II: imensions ax. ax. ax. ax. ax. ax. ax OTTS:.096/.088 (2.43/2.23) I OTTS:.5/.45 (3.8/3.68) I. In. ±.003 ± 0.08 In. In. In. In. ±.003 ± 0.08 In. In. In S S S S S S S S S S S S S erformance Specifications urrent Rating 3 WV 600 V Sea level Insulation Resistance 5000 egohms inimum ontact Resistance 8 illiohms aximum ow evel ontact Resist. 32 illiohms aximum agnetic ermeability 2 µ aximum Operating Temperature -55. to +50. Shock, Vibration 50 g., 20g. ating orce (0 Ounces) X (# of ontacts) onnector Shell Insulator Interfacial Seal in ontact Socket ontact ardware ncapsulant WIR T.0/-0.0 (+.254/-0.0).093 ±.005 (2.36 ± 0.3) aterials and inishes luminum lloy 606 or Stainless Steel, 300 Series, passivated. See Ordering Info for lating Options iquid rystal olymer ()/ olyphenyl Sulfide(S) luorosilicone Rubber, lue eryllium opper old over ickel lating opper lloy old Over ickel lating 300 Series Stainless Steel poxy Resin ysol 425 IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

36 icro- arness icro- W ack-to-ack etal Shell Unshielded able ssembly IX Save Time and oney With ack-to-ack ables these icro- connectors feature crimp wire terminations and epoxy encapsulation. The installed cost is lower than terminating solder cup connectors. 00% ertified ll back-to-back assemblies are 00% checked for continuity, resistance, voltage and insulation resistance. ardware ote If jackposts are required on one end and jackscrews on the other, use hardware designator (no ardware installed), and order hardware kits separately. ow To Order ack-to-ack able ssembly Sample art umber mwdm 2 l- 25 s- 4 k 7-8 b Series Shell aterial and inish Insulator aterial W lenair icro- luminum Shell - admium 2 - ickel 4 - lack nodize 5 - old 6 - hem ilm - or S - 30% lass-illed iquid rystal olymer S - 40% lass illed olyphenylene Sulfide Stainless Steel Shell 3 - assivated ontact ayout 9, 5, 2, 25, 3, 37, 5, 5-2, 67, 69, 75, 00, 30 onnector Type in (lug) onnector oth nds S Socket (Receptacle) onnector oth nds S in onnector to Socket onnector Wire age (W) 4 - # # # #30 ( wire type only) Wire Type Wire olor Wire ength Inches ardware 22759/ 600 VRS Teflon (T) 22759/ VRS odified ross- inked Tefzel (T) White 2 Yellow 5 olor-oded Stripes er I-ST-68 (up to 5 colors) 7 Ten olor Repeating VRS Type 6878/4 (T) 8 - Wire ength In Inches. 8 Specifies 8 Inches. (2 in. for 2 row, 3 in. for 3 row, 4 in. for 4 row),,,, S, S,,,, R, Table I: ounting ardware S S R Thru-ole ackpost ex ead ackscrew ex ead ackscrew, xtended Slot ead ackscrew Slot ead ackscrew, xtended ex ead ackscrew on- Removable Slot ead ackscrew on- Removable xtended loat ount or ront anel ounting loat ount or Rear anel ounting Threaded Insert 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

37 icro- W ack-to-ack etal Shell Unshielded able ssembly icro- arness ayout In. erformance Specifications urrent Rating 3 WV 600 V Sea level Insulation Resistance 5000 egohms inimum ontact Resistance 8 illiohms aximum ow evel ontact Resist. 32 illiohms aximum agnetic ermeability 2 µ aximum Operating Temperature -55. to +50. Shock, Vibration 50 g., 20g. ating orce (0 Ounces) X (# of ontacts) Table II: imensions ax. ax. ax. ax. ax. ax. ax OTTS:.096/.088 (2.43/2.23) I OTTS:.5/.45 (3.8/3.68) I. In. ±.003 ± 0.08 In. In. In. onnector Shell Insulator In. ±.003 Interfacial Seal in ontact Socket ontact ardware ncapsulant ± 0.08 In. In. In S S S S S S S S S S S S S ±.005 (2.36 ± 0.3) aterials and inishes WIR T +.0/-0.0 (+25.4/-0.0) luminum lloy 606 or Stainless Steel, 300 Series, passivated. See Ordering Info for lating Options iquid rystal olymer ()/ olyphenyl Sulfide(S) luorosilicone Rubber, lue eryllium opper old over ickel lating opper lloy old Over ickel lating 300 Series Stainless Steel poxy Resin ysol 425 IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

38 icro- arness W icro- Shielded able ssembly Single-nded or ouble-nded These easy-to-order cable assemblies eliminate the need for expensive assembly labor. 00% tested and ready for use. ow With Twisted airs o need to create a procurement specification for icro- cables with twisted pairs. lenair cables are furnished with a full complement of white/blue twisted pair wires. Integral Shield Termination The connector shell has a platform to accept and-it shield termination bands. The cable shield braid is attached directly to the connector. Save abor, Reduce Weight and Improve I Shielding with lenair s icro- Shielded able ssemblies erospace electronics systems require higher and higher levels of protection from radiated emissions. lenair s fully shielded icro- cable assemblies meet this need. The cable shield is attached directly onto the onepiece connector shell and secured with a stainless steel and-aster TS clamp. These pre-wired, 00% tested assemblies meet the requirements of I-T n optional ground spring on the pin connector assures low shell-to-shell resistance. vailable with a variety of wire types and shields, icro- shielded assemblies can be ordered in any length, either single-ended or back-to-back. SII TIVSS (b) round Spring and I Shielding ffectiveness gold-plated stainless steel ground spring on the pin connector mating face offers substantial improvement in I protection. The graphs compare identical connectors tested with and without ground springs. I erformance with round Spring frequency (z) SII TIVSS (b) I erformance without round Spring frequency (z) IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

39 W icro- Shielded able ssembly (Untwisted Wire) and (Twisted Wire airs) icro- arness ow To Order Shielded icro- able ssemblies Sample art umber p 4 k -8 Series Untwisted Wire Twisted air Wire Shell aterial and inish luminum Shell - admium 2 - lectroless ickel 5 - old ontact ayout 9, 5, 2, 25, 3, 37, 5, 5-2, 67, 69, 75, 00, 30 in (Single nd lug) S Socket (Single nd Receptacle) ontact Type ouble nd able, in onnectors oth nds S ouble nd able, Socket connectors oth nds S ouble nd able, in and Socket Wire age (W) 4 - # # # #30 ( wire type only) Teflon Wire er I-W-22759/ (ot available in #30 gage) Wire Type ross-inked Tefzel Wire er I-W-22759/33 White (77-70 only) Or White/lue airs ( Only) 5 olor-oded er I-ST-68 (77-70 only)(#24 and #26 gage only) Wire olor White/lue Twisted airs with umbered Wire arkers ( only) 7 Ten olor Repeating (77-70 only) Overall ength (In.) xample 8 = 8 inches 6 Inch (52 ) inimum o ounting ardware Installed loat ount, for ront anel ale ackscrew, llen ead, on-removable ounting ardware ale ackscrew, llen ead, ow rofile ounting emale ackpost R loat ount, for Rear anel ounting S ale ackscrew, Slot ead, ow rofile Shield and acket Option o Shield, o acket raided Shield Installed (ickel over opper) raided Shield Installed (ickel over opper) With -T alar xpando acket (+50.) o Shield, With -T alar xpando acket Installed (+50.) S 00% raided mberstrand Shield Installed T 00% raided mberstrand Shield Installed with -T alar xpando acket (+50.) V 75% raided mberstrand Shield Installed Z 75% raided mberstrand Shield Installed with -T alar xpando acket (+50.) W rmorite raided icrofiliment Stainless Steel Shield Installed X rmorite raided icrofiliment Stainless Steel Shield Installed with -T alar xpando acket (+50 ) round Spring Option* o round Spring round Spring Installed (in onnectors Only) *round spring cannot be used with cadmium plating Table I: ounting ardware S R Thru-ole, o ounting ardware emale ackpost ex ead ackscrew Slot ead ackscrew ex ead ackscrew on- Removable loat ount for ront anel ounting loat ount for Rear anel ounting IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

40 icro- arness W icro- Shielded able ssembly (Untwisted Wire) and (Twisted Wire airs) IX urrent Rating ielectric Withstanding Voltage erformance Specifications V Sea evel Voltage 50 V 70,000 eet Insulation Resistance 5000 egohms inimum ontact Resistance 8 illiohms aximum ow evel ontact Resistance 32 illiohms aximum agnetic ermeability 2 µ aximum Operating Temperature -55. to +50. Shock 50 g. Vibration 20 g. Outgassing eets S Outgassing Requirements ating orce (0 Ounces) X (# of ontacts) I Shielding ffectiveness 50 d ttenuation, 00 z to 000 z or additional performance requirements, please refer to I T (6.4) Wire ength.093 ±.005 (2.36 ± 0.3) onnector Shell Insulator Interfacial Seal in ontact Socket ontact Shield raid aterials and inishes lating ode : admium With Yellow hromate lating ode 2: lectroless ickel, lating ode 5: old iquid rystal olymer ()/olyphenylene Sulfide (S) luorosilicone Rubber, lue opper lloy With 50 icroinches old over ickel lating opper lloy With 50 icroinches old Over ickel lating #36 W ickel-oated opper per ST 355 lass 4 O 00% mberstrand I/RI onductive omposite Thermoplastic raided Shielding 75% mberstrand onductive omposite Thermoplastic I/RI Shielding lended with 25% iu I/RI raided Shielding rmorite ightweight Stainless Steel I/RI Shielding Table II: imensions ax. ax. ax. ax. () () () () ayout In. In. ±.003 ± 0.08 In. In. In. In. ±.003 ± 0.08 In. In. In. In S S S S S S S S S S S S S Wire ardware acket ncapsulant Type : per I-W-22759/. Silver-lated opper onductor, xtruded T Teflon Insulation Type : per I-W-22759/33. Silver-lated opper onductor, xtruded rosslinked Tefzel Insulation Series Stainless Steel Type : T xpando raided acket, +25. Type : -T (thylene- hlorotriflourethylene) alar xpando raided acket, +50. poxy Resin ysol OTTS.096/.088 (2.43/2.23) I OTTS.5/.45 (3.8/3.68)I () () () () 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

41 W icro- Shielded able ssembly (Untwisted Wire) and (Twisted Wire airs) icro- arness TRU 5 OTT TWIST IR WIRI IR ontacts 5 ontacts WT U WT U WT U WT U WT WT U WT U WT U WT U WT U WT U WT U WT ontacts 25 ontacts WT U WT U WT U WT U WT U WT U WT U WT U WT U WT U WT WT U WT U WT U WT U WT U WT U WT U WT U WT U WT U WT U WT U WT ontacts WT U WT U WT U WT U WT U WT U WT U WT U WT U WT U WT U WT U WT U WT U WT U WT WT U WT U WT U WT U WT U WT U WT U WT U WT U WT U WT U WT U WT U WT U WT U WT U WT U WT U WT U WT U WT U WT U WT U WT U WT U WT 5 ontacts 2 Row special ontacts 5 ontacts WT U WT U WT U WT U WT U WT U WT U WT U WT U WT U WT U WT U WT U WT U WT U WT U WT U WT U WT WT U WT U WT U WT U WT U WT U WT U WT U WT U WT U WT U WT U WT U WT U WT U WT U WT U WT U WT U WT U WT U WT U WT U WT U WT U WT IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

42 icro- arness IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected] TRU 30 OTT TWIST IR WIRI IR U WT U WT U WT U WT U WT U WT U WT WT U WT U WT U WT U WT U WT U U WT U WT WT U WT U WT U WT U WT U WT U WT U U WT U WT U WT WT U WT U WT U WT U WT U WT U WT U WT WT U ontacts U WT U WT U WT U WT U WT U WT U WT WT U WT U WT U WT U WT U WT U U WT U WT WT U WT U WT U WT U WT U WT U WT U U WT U WT U WT WT U WT U WT U U WT WT U WT U WT U WT U WT WT U ontacts 75 ontacts U WT U WT U WT U WT U WT U WT U WT WT U WT U WT U WT U WT U WT U U WT U WT WT U WT U WT U WT U WT U WT U WT U U WT U WT U WT WT U WT U WT U WT U U WT U WT U WT U WT U WT WT U U WT WT U WT ontacts U WT U WT U WT U WT U WT U WT U WT WT U WT U WT U WT U WT U WT U U WT U WT WT U WT U WT U WT U WT U WT U WT U U WT U WT U WT WT U WT U WT U WT U U WT U WT U WT U WT U WT WT U U WT U WT U WT U WT U WT U U WT WT U WT U WT U WT U WT U WT WT U U WT WT U ontacts U WT U WT U WT U WT U WT U WT U WT WT U WT U WT U WT U WT U WT U U WT U WT WT U WT U WT U WT U WT U WT U WT U U WT U WT U WT WT U WT U WT U WT U U WT U WT U WT U WT U WT WT U U WT U WT U WT U WT U WT U U WT WT U WT U WT U WT U WT U WT WT U U WT WT U 5 83 WT U WT U U WT U WT U WT WT U U WT WT U 23 9 U WT U WT U WT WT U U WT WT U WT U W icro- Shielded able ssembly (Untwisted Wire) and (Twisted Wire airs)

43 icro- W etal Shell Uninsulated Wire onnector icro- arness icro- Uninsulated igtails These connectors feature gold-plated Twistin contacts and mil spec crimp termination to gold-plated solid copper wire. Suitable for soldering or splicing applications, the wire leads can be ordered either gold-plated or solder-dipped. ew One-iece Socket ontact n integral tail socket contact is now standard on all socket connectors ordered with 24 W or 25 W, up to one inch of wire. This phospher bronze contact eliminates the crimp joint and offers greater rigidity. ow To Order Uninsulated Wire icro- onnectors Sample art umber mwdm 2 l- 37 p- 5 c m Series Shell aterial and inish W lenair icro- luminum Shell - admium 2 - ickel 4 - lack nodize 5 - old 6 - hem ilm Stainless Steel Shell 3 - assivated - or S Insulator aterial - 30% lass-illed iquid rystal olymer S - 40% lass illed olyphenylene Sulfide ontact ayout 9, 5, 2, 25, 3, 37, 5, 5-2, 67, 69, 75, 00, 30 (See Table II) ontact Type in S Socket Wire age (W) 4 #24 (.020 ) 5 #25 (.08 ) 6 #26 (.06 ) Wire Type Solid opper Wire inish 3 Solder-ipped Sn 60/40 4 old Wire ength (Inches).25,.250,.375,.500,.750,.000, Wire ength In Inches..500 Specifies alf Inch. ardware,,,, S, S,,,, R, (See Table I) Table I: ounting ardware S S R Thru-ole ackpost ex ead ackscrew ex ead ackscrew, xtended Slot ead ackscrew Slot ead ackscrew, xtended ex ead ackscrew on- Removable Slot ead ackscrew on- Removable xtended loat ount or ront anel ounting loat ount or Rear anel ounting Threaded Insert IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

44 icro- arness icro- W etal Shell Uninsulated Wire onnector IX ayout In. Table II: imensions ax. ax. ax. ax. ax. ax. ax OTTS:.096/.088 (2.43/2.23) I OTTS:.5/.45 (3.8/3.68) I. In. ±.003 ± 0.08 In. In. In. In. ±.003 ± 0.08 In. In. In S S S S S S S S S S S S S erformance Specifications urrent Rating 3 WV 600 V Sea level Insulation Resistance 5000 egohms inimum ontact Resistance 8 illiohms aximum ow evel ontact Resist. 32 illiohms aximum agnetic ermeability 2 µ aximum Operating Temperature -55. to +50. Shock, Vibration 50 g., 20g. ating orce (0 Ounces) X (# of ontacts) onnector Shell Insulator Interfacial Seal in ontact Socket ontact ardware ncapsulant.093 ±.005 (2.36 ± 0.3) T +0.2/-0.0 (+5.08/-0.0) aterials and inishes luminum lloy 606 or Stainless Steel, 300 Series, passivated. See Ordering Info for lating Options iquid rystal olymer () olyphenylene Sulfide (S) luorosilicone Rubber, lue opper lloy, _old over ickel lating opper lloy, old Over ickel lating 300 Series Stainless Steel poxy Resin ysol lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

45 icro- etal Shell R Insulated Wire with Right ngle xit icro- arness I R Table II: ounting ardware S S R Thru-ole ackpost ex ead ackscrew ow To Order R Right ngle xit onnector Sample art umber gmdr s 2 l- 37 s 6 k 7-8 b Series Wire xit Shell aterial and inish R lenair icro- Right ngle S - xit Towards Short Row (See Table I) luminum Shell - admium 2 - ickel 4 - lack nodize 5 - old 6 - hem ilm ex ead ackscrew, xtended - xit Towards ong Row Slot ead ackscrew Stainless Steel Shell 3 - assivated - or S Insulator aterial - 30% lass-illed iquid rystal olymer S - 40% lass filled polyphenylene sulfide ontact ayout 9, 5, 2, 25, 3, 37, 5, 5-2, 67, 69, 75, 00, 30 (See Table III) ontact Type in S Socket Wire age (W) 4 - # # # #30 ( Wire Only) Wire Type / /33-3- Wire olor - White 2 - Yellow 5 - olor oded (ull olor) 7-0 olor Repeat Wire ength Inches 8 = 8 inches ardware,,,, S, S,,,, R,, (See Table II) icro- Right ngle These connectors feature a space saving right angle exit on either the long or short row and incorporate gold-plated Twistin contacts and mil spec crimp termination. Specify nickel-plated shells or cadmium plated shells for best availability. 00% tested and backpotted, ready for use. Table I: R Wire xit Slot ead ackscrew, xtended ex ead ackscrew on- Removable I Slot ead ackscrew on- Removable xtended RS loat ount or ront anel ounting loat ount or Rear anel ounting Threaded Insert IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

46 icro- arness icro- etal Shell R Insulated Wire with Right ngle xit IX max potting size 5, 69, 75, 00 and 30 Table III: imensions Shell Size ax ±.003 ax ax ax ±.003 ax ax ax in mm in mm in mm in mm in mm in mm in mm in mm in mm S S S S S S S S S S S S erformance Specifications urrent Rating 3 WV 600 V Sea level Insulation Resistance 5000 egohms inimum ontact Resistance 8 illiohms aximum ow evel ontact Resist. 32 illiohms aximum agnetic ermeability 2 µ aximum Operating Temperature -55. to +50. Shock, Vibration 50 g., 20g. ating orce (0 Ounces) X (# of ontacts) (RS) 9-69 contacts:.096/.088 (2.43/2.23) ia contacts:.5/.45 (3.8/3.68) ia. onnector Shell Insulator Interfacial Seal in ontact Socket ontact ardware ncapsulant aterials and inishes luminum lloy 606 or Stainless Steel, 300 Series, passivated. See Ordering Info for lating Options iquid rystal olymer () luorosilicone Rubber, lue opper lloy, old over ickel lating opper lloy, old Over ickel lating 300 Series Stainless Steel poxy Resin ysol 425 ength +0.2/-0.0 ( ) 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

47 icro- etal Shell nvironmentally Sealed Rear anel ount With O-Ring icro- arness RI I RI Style lind tapped mounting holes with stainless steel inserts accomodate either #4-40 or 3 mounting screws. onnectors are supplied with jackposts installed. Socket connectors feature integral jackposts. I Style Space-saving design uses rear panel mount jackposts to attach connectors to the panel. rotect Your quipment with Ruggedized icro- onnectors hoose the Style That eets Your eeds RI version features blind tapped mounting holes, allowing secure installation on panels. I version saves space by using rear panel jackposts to attach the connector. ates to Standard 8353 onnectors connectors meet the requirements of I-T-8353 and feature Twistin contacts for best performance. eets I-ST-80 Immersion The nitrile O-ring and a special epoxy wire sealing process allow connectors to meet immersion requirements. Tactical communications boxes must be sealed to prevent water ingress. Standard 8353 type icro connectors can be difficult to seal to a bulkhead. The flange is too narrow for a gasket, and sealing with RTV can be time-consuming and messy. The lenair connector with O-rings provide a better way to seal the connector. ow To Order onnectors Sample art umber gmde 2 25 S- rmi 4 k 7-8 sm Series Shell aterial and inish lenair icro- nvironmental luminum Shell - admium 2 - ickel 4 - lack nodize 5 - old 6 - hem ilm Stainless Steel Shell 3 - assivated ontact ayout 9, 5, 2, 25, 3, 37, 5, 5-2, 67, 00 (See Table I) ontact Type - in S - Socket lange Style RI - lind Tapped ounting I - Space Saving Rear anel ount with ackposts Wire age (W) 4 - # # #28 0 #30 ( type only) Wire Type Wire olor Wire ength Inches ardware 22759/ 600 VRS Teflon (T) - White 2 - Yellow 5 - olor oded, Stripes er I-ST-68 (Up to 5 colors) 7 Ten olor Repeating 22759/ VRS odified ross- inked Tefzel (T) 8 - Wire ength In Inches. 8 Specifies 8 Inches. RI Style Only S - urnished with ackposts and 3 ounting oles SU - urnished with ackposts and #4-40 ounting oles VRS Type 6878/4 (T) I Style Only ackposts for Rear anel ount T (2.4) V (.6) W (.2) X -.03 (0.8) Y (0.65) IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

48 icro- arness icro- etal Shell nvironmentally Sealed Rear anel ount With O-Ring Table I: RI imensions 3 TRS OR #4-40 U TRS 2 S WIR T +.0/-0.0 (+25.4/-0.0) ITR OST (SOT) 9-67 OTTS #2-56 U-2 00 OTTS #4-40 U ±.002 (2.39 ± 0.05).526 (3.36) X 9-67 OTTS.599 (5.2) X 00 OTTS Socket RI Style onnector IX ayout 094. ±.002 (2.39 ± 0.05) In. ax. ax. ax. ax. ax. ax. In. ±.003 ± 0.08 In. ±.003 ± TRS OR #4-40 U TRS 2 S OST 9-67 OTTS #2-56 U-2 00 OTTS #4-40 U-2.50 (2.95) X 9-67 OTTS.584 (4.83) X 00 OTTS In. In. In. In. ±.003 ± 0.08 WIR T +.0/-0.0 (+25.4/-0.0) In. In S S S S S S S S S S in RI Style onnector 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

49 icro- etal Shell nvironmentally Sealed Rear anel ount With O-Ring icro- arness Table II: I imensions WIR T +.0/-0.0 (+25.4/-0.0) RR OST 9-67 OTTS #2-56 U-2 00 OTTS #4-40 U-2 ayout In. ax. ax. ax. ax. ax. ax. ax. ax. In. ±.003 ± 0.08 In. In. In. In. ±.003 ± 0.08 In. In. In S S S S S S S S S S IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

50 icro- arness icro- etal Shell nvironmentally Sealed anel ount With O-Ring RI Version Table III: anel utout imensions 0.4x45 hamf onnector nters rom This Side ull Radius Ø.34 ±.004 (3.40 ± 0.0) 2 lcs Section Thru ut Out I Version IX ayout In. ±.003 ± (.57) RIUS 4 S In. ±.005 ± 0.3 Ø In / /-0 In. ±.005 ± 0.3 In. ±.005 ± 0.3 In. ±.002 ± 0.05 In. ± ± lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

51 icro- SW SpaceWire able ssembly in ack-to-ack or Single nded Wire onfigurations icro- arness Single-nded or ouble-nded These easy-to-order cable assemblies eliminate the need for expensive assembly labor. 00% tested and ready for use. igh erformance Insulation xpanded polytetrafluoroethylene (T) allows for the support of VS technology to significantly reduce data loss while allowing for the implementation of standard hardware protocols, thus eliminating the need for design customizations while reducing costs. ost Saving, asy Integration and igh-erformance for light and ab rade ata Transmission. The success of any space mission begins with reliable data transmission and lenair SpaceWire cables, built to meet the strict standards set forth by SS--ST-50-2, make this a reality. Our SpaceWire cables offer bidirectional, high speed data transmission rates up to 400 bits/s while significantly reducing cross talk, skew, and signal attenuation. y incorporating a serial, point-to-point cable, with low voltage differential signaling (VS) reduced costs are realized through an easily integrated data transmission cable. These features allow SpaceWire cables to be incorporated across various satellite programs without the expense of costly design customization. ow To Order SpaceWire able ssembly Sample art umber gswm 2 l -9 gp -6 f b -6 s roduct Series SW lenair SpaceWire icro- Shell lating 2 - lectroless ickel 5 - old Insulator aterial Shell Size 9 onnector Type - - Single nded in (lug) - in (lug) onnector oth nds Wire auge 6-26 W 8-28 W 0-30 W (30 W ab Only) able Type - light rade - ab rade Termination Option able ength In Inches - ackshell 6-6 inches (2 inches minimum) ardware S - ale Slotted ackscrew - emale ackpost IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

52 icro- arness icro- SW SpaceWire able ssembly in ack-to-ack or Single nded Wire onfigurations in ack To ack Wiring iagram () " -0.00" otes:. light grade (cable Type ) assemblies to be screened IW S -IST-002, Table 2. evel with 00% thermal vacuum outgassing (24 hours/+25 /0-6 torr). Reference lenair od ode Operating temperature to +80. Reference lenair od ode lectrical performance: ielectric withstanding voltage: 600 V. Insulation resistance: 5000 V. 4. ssembly to be identified with lenair s name, art umber, age ode and ate ode or S omponent art arking Standards lenair ackshell Single nded Wiring iagram () ackscrew ardware in aterials/finish: Shells/backshells - aluminum alloy/electroless nickel. Insulators - high grade rigid dielectric/.. ontacts - copper alloy, gold plated. ardware - stainless steel/passivated. IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

53 icro- asteratch re-wired atching icro- onnector with Insulated Wire icro- arness ow To Order asteratch Sample art umber roduct Series lenair asteratch icro- Shell lating - admium 2 - ickel 4 - lack nodize 5 - old 6 - hem ilm Insulator aterial - or S ontact ayout 9, 5, 2, 25, 3, 37 onnector Type - in (lug) S - Socket (Receptacle) Wire auge 4-24 W 6-26 W 8-28 W 0-30 W ( Wire Only) Wire Type / 60 Vrms Teflon / Vrms odified ross-inked Tefzel (T) Wire olor ode - White 2 - Yellow 5 - olor oded 7 - Ten olor Repeating able ength In Inches 8-8 inches asteratch icro- () uick-release locking icro- connector pairs are equipped with a precision latching and locking mechanism. The single thumb latch on the plug side actuates a pair of locking latches that mate quickly and reliably to receptacles. These Twistin equipped, low-insertion-force connectors meet all the standard performance requirements of I-T-853 including vibration, shock, and mating durability. hoose from 6 different insert arrangements from 9 to 37 contacts. The unique ergonomic latching mechanism can be easily activated with a thumb and forefinger grip even when wearing gloves, or when difficult access to connector pairs makes the use of jacking hardware and tools impossible. onnector Shell Insulator Interfacial Seal in ontact Socket ontact ardware ncapsulant aterials and inishes luminum lloy 606 or Stainless Steel, 300 Series, passivated. See Ordering Info for lating Options iquid rystal olymer () or olyphenylene Sulffide (S) luorosilicone Rubber, lue eryllium opper old over ickel lating opper lloy old Over ickel lating 300 Series Stainless Steel poxy Resin ysol 425 erformance Specifications urrent Rating 3 WV 600 V Sea level Insulation Resistance 5000 egohms inimum ontact Resistance 8 illiohms aximum ow evel ontact Resist. 32 illiohms aximum agnetic ermeability 2 µ aximum Operating Temperature -55. to +50. Shock, Vibration 50 g., 20g. ating orce (0 Ounces) X (# of ontacts) IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

54 icro- arness icro- asteratch re-wired atching icro- onnector with Insulated Wire lug asteratch imensions Receptacle WIR T +.0/-0.0 WIR T +.0/-0.0 IX ayout ax ax ax ax ax In mm In mm In mm In mm In mm In mm In mm S / / S / / S / / S / / S / / S / / 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

55 R-S ondensed oard Straight age -2 R-R ondensed oard Right ngle age -4 W S Vertical age -6 W R Right ngle age -0 W R ondensed oard Right ngle age -4 W S ondensed oard Straight age -20 W Surface ount Right ngle age -28 R 7580 Vertical age -32 R 7590 Right ngle age -36 R 7580 ompact lange age -40 R 7590 ompact lange age -44 Section icro- etal Shell rinted ircuit oard onnectors. roduct Selection uide R-ondensed oard Rear anel ount onnector These connectors save size and weight compared to.00" pitch connectors. vailable with eight lead lengths, and optional threaded insert. Select from a full range of mounting hardware and shell plating choices. W.00" X.00" itch Thru-ole rinted ircuit oard lways in stock, these industry-standard connectors feature 60/40 Snb solder-dipped.020" diameter tails in eight lengths W.00" X.075" ondensed oard Straight Verticle In accordance with the 8353 spec, these connectors save real estate on the circuit board and are also intended for use on flexible circuits. W Surface ount Right ngle These connectors feature.025 inch (0.64 ) terminal spacing. The integral metal mounting legs provide a ground path. molded alignment strip ensures accurate terminal registration. R75.075" X.075" itch Thru-ole These connectors save size and weight compared to.00" pitch connectors. vailable in vertical and right angle with two standard tail lengths plus a staggered tail version. These connectors also have a full range of mounting hardware options and shell plating options available. R75.075" X.075" itch ompact esigned for flexible circuits, these connectors are modified versions of the R75 series. The flange thickness is.00" maximum, allowing installation of standard jackscrews. IX icro- 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

56 icro- Icro- R-S ondensed Vertical Rear anel ount Wide lange rinted ircuit oard onnectors IX onnector Shell Insulator Interfacial Seal in ontact Socket ontact ardware ncapsulant aterials and inishes luminum lloy 606 or Stainless Steel, 300 Series, passivated. See Ordering Info for lating Options iquid rystal olymer () or olyphenylene Sulffide (S) luorosilicone Rubber, lue eryllium opper old over ickel lating opper lloy old Over ickel lating 300 Series Stainless Steel poxy Resin ysol 425 Save Space On Your ircuit oard These icro- connectors feature.075 inch row spacing. The board footprint is reduced to match the size of the connector body. Solder-ipped Terminals are coated with Sn60/b40 tin-lead solder for best solderability. Optional gold-plated terminals are available for RoS compliance. igh erformance These connectors meet the demanding requirements of I-T ow To Order R ondensed Vertical onnector Sample art umber R 2-5 S R3 T Series Shell aterial and inish R lenair Rear anel ount luminum Shell - admium 2 - ickel 4 - lack nodize 5 - old 6 - hem ilm Stainless Steel Shell 3 - assivated - or S Insulator aterial - 30% lass-illed iquid rystal olymer S - 40% lass illed olyphenylene Sulfide ontact ayout 9, 5, 2, 25, 3, 37, 5, 69, 00 (See Table I) ontact Type in S Socket Termination Type S - ondensed oard Straight Rear anel ount ardware Option Threaded Insert Option - o hardware R panel R panel R panel R panel R panel R panel T - Threaded Insert in oard ount ole Omit for none 9-69 ontacts ontacts O-Ring - onductive - on onductive (itrile) ead ength.080,.0,.25,.40,.50,.72,.90,.250 old-lated Terminal od ode These connectors are solder-dipped in 60/40 tin-lead solder. To delete the solder dip and change to gold-plated terminals, add code 53 erformance Specifications urrent Rating 3 WV 600 V Sea level Insulation Resistance 5000 egohms inimum ontact Resistance 8 illiohms aximum ow evel ontact Resistance 32 illiohms aximum agnetic ermeability 2 µ aximum Operating Temperature -55. to +50. Shock, Vibration 50 g., 20g. ating orce (0 Ounces) X (# of ontacts) 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

57 .093 ayout in. ±.005 Icro- R-S ondensed Vertical Rear anel ount Wide lange rinted ircuit oard onnectors X.025 Table I: imensions I ST X 24 W (ø.020) SOR I S ax ax ±.003 ax ax ax ±.3 in. ±.003 ±.08 in. in. ±.005 ±.3 in. in. ±.003 ±.08 in. in. in S S S S S S S S S otes:. ssembly to be identified with lenair s name, part number, date code, and pin identification 2. erformance data per I-T Interface dimensions per I-T layout per lenair WS catalog data. See Section IX icro- 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

58 icro- icro- R-R Right ngle Rear anel ount Wide lange rinted ircuit oard onnectors onnector Shell Insulator Interfacial Seal in ontact Socket ontact ardware ncapsulant aterials and inishes luminum lloy 606 or Stainless Steel, 300 Series, passivated. See Ordering Info for lating Options iquid rystal olymer () or olyphenylene Sulffide (S) luorosilicone Rubber, lue eryllium opper old over ickel lating opper lloy old Over ickel lating 300 Series Stainless Steel poxy Resin ysol 425 Save Space On Your ircuit oard These icro- connectors feature.00 inch row spacing. The board footprint is reduced to match the size of the connector body. Solder-ipped Terminals are coated with Sn60/b40 tin-lead solder for best solderability. Optional gold-plated terminals are available for RoS compliance. igh erformance These connectors meet the demanding requirements of I-T ow To Order R Right ngle onnectors Sample art umber R 2-5 R R3 T Series Shell aterial and inish R - lenair Right ngle Rear anel icro luminum Shell - admium 2 - ickel 4 - lack nodize 5 - old 6 - hem ilm Stainless Steel Shell 3 - assivated - or Ryton Insulator aterial - 30% lass-illed iquid rystal olymer S - 40% lass-illed olyphenylene Sulfide ontact ayout 9, 5, 2, 25, 3, 37, 5, 69, 00 (See Table I) ontact Type in S Socket Termination Type R - ondensed oard Right ngle Rear anel ount ardware Option Threaded Insert Option - o hardware R panel R panel R panel R panel R panel R panel T - Threaded Insert in oard ount ole; 9 thru 69 ontacts use 2-56; 00 ontacts use 4-40 Omit for none O-Ring - onductive - on onductive (itrile) ead entgth.080,.0,.25,.40,.50,.72,.90,.250 old-lated Terminal od ode These connectors are solder-dipped in 60/40 tin-lead solder. To delete the solder dip and change to gold-plated terminals, add code 53 erformance Specifications urrent Rating 3 WV 600 V Sea level Insulation Resistance 5000 egohms inimum ontact Resistance 8 illiohms aximum ow evel ontact Resist. 32 illiohms aximum agnetic ermeability 2 µ aximum Operating Temperature -55. to +50. Shock, Vibration 50 g., 20g. ating orce (0 Ounces) X (# of ontacts) IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

59 ayout icro- R-R Right ngle Rear anel ount Wide lange rinted ircuit oard onnectors I ST.093 X Table I: imensions X ±.003 ax ax ax ax ax in. in. in. in. in. in. in. in. in. in. in. ±.005 ±.3 ±.003 ±.08 ±.005 ±.3 ±.003 ±.08 ±.00 ±.25 ±.00 ± S S S S S S S S S otes:. ssembly to be identified with lenair s name, part number, date code, and pin identification 2. erformance data per I-T Interface dimensions per I-T W (ø.020) SOR I S 4. layout per lenair W R catalog data except for dimension shown. See Section IX icro- 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

60 icro- icro- W-S Vertical ount Thru-ole rinted ircuit oard onnectors TR ISRT igh erformance These connectors feature gold-plated Twistin contacts for best performance. tails are.020 inch diameter. Specify nickel-plated shells or cadmium plated shells for best availability. Solder-ipped Terminals are coated with Sn60/b40 tin-lead solder for best solderability. Optional gold-plated terminals are available for RoS compliance. Rear ountable an be installed through panels up to.25 inch thick. Specify rear panel mount jackposts. ow To Order S Vertical Style icro- onnectors Sample art umber mwdm l -5 p bs r3 T Series Shell aterial and inish W lenair icro- luminum Shell - admium 2 - ickel 4 - lack nodize 5 - old 6 - hem ilm Stainless Steel Shell 3 - assivated l - or S Insulator aterial - 30% lass-filled liquid crystal polymer S - 40% lass-filled polyphenylene sulfide ontact ayout 9, 5, 2, 25, 3, 37, 5, 00 (See Table II) ontact Type - in S - Socket Termination Type S - oard Straight Omit - one - ackpost ackposts for Rear anel ounting ackpost Option R anel R anel R anel (See Table I) R anel R anel R " anel Threaded T - Threaded Insert In oard ount ole Omit - for Thru-ole Insert Option Terminal ength.080,.0,.25,.40,.50,.72,.90,.250 ength in Inches ±.05 (0.38) (See Table II) in Inches old-lated Terminal od ode These connectors are solder-dipped in 60/40 tin-lead solder. To delete the solder dip and change to gold-plated terminals, add code 53 Table I: ackpost Options o esignator R Thru R6 anel IX Thru-ole or use with lenair jackposts only. Order hardware separately. Install with threadlocking compound. Standard ackpost actory installed, not intended for removal. ackpost for Rear anel ounting Shipped loosely installed. Install with permanent threadlocking compund. 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

61 ayout In. icro- W-S Vertical ount Thru-ole rinted ircuit oard onnectors Table II: imensions ax. ax. ax. ax. ax. 2 X T OS 9-5 OTTS.096 ±.005 (2.43 ± 0.3) 00 OTTS.25 ±.005 (23.8 ± 0.3) In. ±.003 ± 0.08 In. In. In S S S S S S S S erformance Specifications urrent Rating 3 WV 600 V Sea level Insulation Resistance 5000 egohms inimum ontact Resistance 8 illiohms aximum ow evel ontact Resist. 32 illiohms aximum agnetic ermeability 2 µ aximum Operating Temperature -55. to +50. Shock, Vibration 50 g., 20g. ating orce (0 Ounces) X (# of ontacts) In. ±.004 ±0.0 onnector Shell Insulator, Tray Interfacial Seal in ontact Socket ontact Terminals ardware ncapsulant.020 ±.002 (0.5± 0.05) In. ±.00 ±0.25 In. ±.007 ±0.8 In. TI T ±.05 (0.38) In. ±.00 ±0.25 aterials and inishes luminum lloy 606 or Stainless Steel, 300 Series, passivated. See Ordering Info for lating Options iquid rystal olymer ()/ olyphenylene Sulfide (S) luorosilicone Rubber, lue opper lloy, old over ickel lating opper lloy, old Over ickel lating old lated opper lloy, Solder ipped 300 Series Stainless Steel poxy Resin ysol 425 IX icro- 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

62 icro- icro- W-S Vertical ount Thru-ole rinted ircuit oard onnectors IRO- S oard ount onnector ayouts in onnectors atterns shown are for connector mounting side of board. 9 Thru 5 ontacts.096 (2.44) iameter ounting oles, 00 in.25 (3.8) iameter.050 (.27).00 (2.54) TY.050 (.27) (.27) (29.2) (29.2) (2.54).225 (5.72) TY.00 (2.54) TY (36.8) onnector Orientation.050 (.27).00 (2.54) TY.050 (.27) TY.375 (9.53).00 (2.54) TY.050 (.27) TY (2.54) TY.050 (.27) TY (5.72) (2.54) TY (.27) (2.54) TY (.27) (2.54) TY (.27) (45.72) (38.0).00 (2.54) TY.050 (.27) TY (3.8).00 (2.54) TY.050 (.27) TY (2.54).50 (3.8) TY (53.34) (2.54) TY (.27) TY (2.54).50 (3.8) TY (50.80) (2.54) TY.050 (.27) TY (3.8) 9 I 5 I 5 I 3 I 2 I 25 I in # 2.800(7.2 ) (2.54) TY.050 (.27) TY (3.8) I IX 00 I 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

63 atterns shown are for connector mounting side of board. 9 Thru 5 ontacts.096 (2.44) iameter ounting oles, 00 in.25 (3.8) iameter.050 (.27) Socket #.00 (2.54) TY.050 (.27).050 (.27) 9.50 (29.2) onnector Orientation.00 (2.54) TY.050 (.27) TY.375 (9.53) 9 SOT 5 SOT.50 (29.2) (2.54).225 (5.72) TY (2.54) TY.050 (.27) TY 8 5 SOT 3 SOT.450(36.8).00 (2.54) TY.050 (.27) TY (2.54).225 (5.72) TY.050 (.27) icro- W-S Vertical ount Thru-ole rinted ircuit oard onnectors IRO- S oard ount onnector ayouts Socket onnectors.050 (.27) 2 SOT 25 SOT.00 (2.54) TY.050 (.27) (2.54) TY SOT (.27) 37 SOT.800 (45.72).500 (38.0) (2.54) TY.050 (.27) TY (2.54).50 (3.8) TY.00 (2.54) TY.050 (.27) TY (2.54).50 (3.8) TY 2.00 (53.34) (50.80).00 (2.54) TY.050 (.27) TY (2.54).50 (3.8) TY.00 (2.54) TY.050 (.27) TY (3.8) 2.800(7.2 ) (2.54) TY.050 (.27) TY.50 (3.8) IX icro- 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

64 icro- icro- W-R Right ngle Thru-ole rinted ircuit oard onnectors TR ISRT igh erformance These connectors feature gold-plated Twistin contacts for best performance. tails are.020 inch diameter. Specify nickel-plated shells or cadmium plated shells for best availability. Solder-ipped Terminals are coated with Sn60/b40 tin-lead solder for best solderability. Optional gold-plated terminals are available for RoS compliance. Rear ountable an be installed through panels up to.25 inch thick. Specify rear panel mount jackposts. ow To Order icro- R Style oard ount onnectors Sample art umber W 2 l -5 p br r3 T Series Shell aterial and inish W lenair icro- luminum Shell - admium 2 - ickel 4 - lack nodize 5 - old 6 - hem ilm Stainless Steel Shell 3 - assivated - or S Insulator aterial - 30% lass-filled liquid crystal polymer S - 40% lass-filled polyphenylene sulfide ontact ayout 9, 5, 2, 25, 3, 37, 5, 00 (See Table II) ontact Type - in S - Socket Termination Type R - oard Right ngle Omit for one - ackpost ackposts for Rear anel ounting ackpost Option R anel R anel R anel (See Table I) R anel R anel R " anel Threaded Insert Option T - Threaded Insert In oard ount ole Omit - for Thru-ole Terminal ength (Inches).080,.0,.25,.40,.50,.72,.90,.250 ength in Inches ±.05 (0.38) (See Table II) old-lated Terminal od ode These connectors are solder-dipped in 60/40 tin-lead solder. To delete the solder dip and change to gold-plated terminals, add code 53 Table I: ackpost Options o esignator R Thru R6 anel rinted ircu onnect IX Thru-ole or use with lenair jackposts only. Order hardware separately. Install with threadlocking compound. Standard ackpost actory installed, not intended for removal. ackpost for Rear anel ounting Shipped loosely installed. Install with permanent threadlocking compund. 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

65 it oard ors ayout In. icro- W-R Right ngle Thru-ole rinted ircuit oard onnectors Table II: imensions ax. ax. ax. ax. ax. In. ±.003 ± 0.08 In. In. In. In. ±.007 ± S S S S S S S S erformance Specifications urrent Rating 3 WV 600 V Sea level Insulation Resistance 5000 egohms inimum ontact Resistance 8 illiohms aximum ow evel ontact Resist. 32 illiohms aximum agnetic ermeability 2 µ aximum Operating Temperature -55. to +50. Shock, Vibration 50 g., 20g. ating orce (0 Ounces) X (# of ontacts).020 (0.5) ±.002 (0. ) 2 X T OS 9-5 OTTS.096 ±.005 (2.43 ± 0.3) 00 OTTS.25 ±.005 (23.8 ± 0.3) onnector Shell Insulator, Tray Interfacial Seal in ontact Socket ontact Terminals ardware ncapsulant In. Tail ength ±.05 (0.38) In. ±.003 ±0.08 In. ±.05 aterials and inishes ±0.38 In. ±.00 ±0.25 luminum lloy 606 or Stainless Steel, 300 Series, passivated. See Ordering Info for lating Options iquid rystal olymer ()/ olyphenylene Sulfide (S) luorosilicone Rubber, lue opper lloy, old over ickel lating opper lloy, old Over ickel lating old lated opper lloy, Solder ipped 300 Series Stainless Steel poxy Resin ysol 425 IX icro- 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

66 icro- icro- W-R Right ngle Thru-ole rinted ircuit oard onnectors atterns shown are for connector mounting side of board. 9 Thru 5 ontacts.096 (2.44) iameter ounting oles, 00 in.25 (3.8) iameter.50 (3.8).00 (2.54) TY.50 (3.8).00 (2.54) TY.50 (3.8) IRO- R oard ount onnector ayouts in onnectors.00 (2.54) TY.50 (3.8) (2.54) TY (29.2) (2.54) TY.050 (.27) TY.375 (9.53) 9 I 5 I.300 (33.02) (7.62).00 (2.54) TY.050 (.27) TY 9 5 I 3 I.450(36.8) (2.54) TY.050 (.27) TY (5.72) I 25 I.50 (3.8) (2.54) TY (3.8) (53.34) I 6.50 (3.8) (2.54) TY (2.54) TY.800 (45.72) (.27) TY (2.54).50 (3.8) TY (63.50) (40.64) (2.54) TY.050 (.27) TY (3.8) (2.54) TY.050 (.27) TY (.27) (3.8) (39.37) (2.54) TY.050 (.27) TY (2.54).75 (4.45) TY.00 (2.54) TY.050 (.27) TY IX 00 I 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

67 atterns shown are for connector mounting side of board. 9 Thru 5 ontacts.096 (2.44) iameter ounting oles, 00 in.25 (3.8) iameter.50 (3.8).50 (3.8).00 (2.54) TY.00 (2.54) TY.50 (3.8) 9.50 (29.2) (2.54) TY.050 (.27) TY.375 (9.53) 9 SOT 5 SOT.300 (33.02) (7.62) (2.54) TY.050 (.27) TY 8 5 SOT 3 SOT.450(36.8).00 (2.54) TY.050 (.27) TY (2.54).225 (5.72) TY.50 (3.8).00 (2.54) TY icro- W-R Right ngle Thru-ole rinted ircuit oard onnectors IRO- R oard ount onnector ayouts Socket onnectors 2 SOT 25 SOT.50 (3.8) (2.54) TY.50 (3.8) 37 SOT 00 SOT.50 (3.8) 7.00 (2.54) TY 2.00 (53.34) (45.72).00 (2.54) TY.050 (.27) TY (2.54) TY.050 (.27) TY.600 (40.64) (2.54).50 (3.8) TY.00 (2.54) TY.050 (.27) TY (.27) (63.50) (3.8) (39.37) (3.8).00 (2.54) TY.050 (.27) TY (2.54).75 (4.45) TY.00 (2.54) TY.050 (.27) TY IX icro- 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

68 icro- icro- W-R Right ngle Thru-ole rinted ircuit oard onnectors igh erformance These connectors feature gold-plated Twistin contacts for best performance. tails are.020 inch diameter. Specify nickel-plated shells or cadmium plated shells for best availability. Solder-ipped Terminals are coated with Sn60/b40 tin-lead solder for best solderability. Optional gold-plated terminals are available for RoS compliance. Rear ountable an be installed through panels up to.25 inch thick. Specify rear panel mount jackposts. ow To Order R Style icro- onnectors Sample art umber W 2-5 R R3 T Series Shell aterial and inish W lenair icro- luminum Shell - admium 2 - ickel 4 - lack nodize 5 - old 6 - hem ilm Stainless Steel Shell 3 - assivated - or S Insulator aterial - 30% lass-filled liquid crystal polymer S - 40% lass-filled polyphenylene sulfide ontact ayout 9, 5, 2, 25, 3, 37, 5, 69, 75, 00, 30 (See Table II) ontact Type in S Socket Termination Type R - ondensed oard Right ngle (Omit for one) ackpost ackposts for Rear anel ounting ackpost Option R.032 anel R2.047 anel R3.062 anel (See Table I) R4.093 anel R5.25 anel R6.080" anel Threaded T - Threaded Insert In oard ount ole Omit - for Thru-ole Insert Option Terminal entgth in Inches.080,.0,.25,.40,.50,.72,.90,.250 ength in Inches ±.05 (0.38) old-lated Terminal od ode These connectors are solder-dipped in 60/40 tin-lead solder. To delete the solder dip and change to gold-plated terminals, add code 53 Table I: ackpost Options o esignator R Thru R6 anel TR ISRT IX Thru-ole or use with lenair jackposts only. Order hardware separately. Install with threadlocking compound. Standard ackpost actory installed, not intended for removal. ackpost for Rear anel ounting Shipped loosely installed. Install with permanent threadlocking compound. 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

69 icro- W-R Right ngle Thru-ole rinted ircuit oard onnectors Table II: imensions OIURTIO OR 9-25 OTTS 2X OUTI OS 9-5 OTTS #2-56 U-2 TRS OUTI OS 00 OTTS #4-40 U-2 TRS 9-5 OTTS.096 I. ±.003 (2.44 ± 0.08) 00 OTTS.25 I. ±.003 (3.8± 0.08) Tail ength ± I ±.003 (3.8± 0.08) ax. ax. ax. ax. ax. ax. ax. ayout In. In. ±.003 ± 0.08 In. In. In. In. ±.003 ± 0.08 In. In. In. ±.00 ±0.25 ±.00 ±0.25 In. In S S S S S S S S S S S erformance Specifications urrent Rating 3 WV 600 V Sea level Insulation Resistance 5000 egohms inimum ontact Resistance 8 illiohms aximum ow evel ontact Resist. 32 illiohms aximum agnetic ermeability 2 µ aximum Operating Temperature -55. to +50. Shock, Vibration 50 g., 20g. ating orce (0 Ounces) X (# of ontacts) onnector Shell Insulator, Tray Interfacial Seal in ontact Socket ontact Terminals ardware ncapsulant OIURTIO OR 3-30 OTTS aterials and inishes luminum lloy 606 or Stainless Steel, 300 Series, passivated. See Ordering Info for lating Options iquid rystal olymer ()/ olyphenylene Sulfide (S) luorosilicone Rubber, lue opper lloy, old over ickel lating opper lloy, old Over ickel lating old lated opper lloy, Solder ipped 300 Series Stainless Steel poxy Resin ysol 425 IX icro- 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

70 icro- icro- W-R Right ngle Thru-ole rinted ircuit oard onnectors IX IRO- R oard ount onnector ayouts in onnectors atterns shown are for connector mounting side of board. 9 Thru 69 ontacts.096 (2.44) iameter ounting oles, in.25 (3.8) iameter.050 (.27).00 (2.54).00 (2.54).083 (2.).050 (.27).00 (2.54) 2X.00 (2.54).083 (2.).050 (.27).00 (2.54) 3X.00 (2.54).58 (4.0).050 (.27).00 (2.54) 4X.00 (2.54).08 (2.74) (4.35) 9 I (2.97) 2 I OTOR.250 (6.35).020 (.5) OTOR OTOR I OTOR (30.86) 5 I.250 (6.35).020 (.5).250 (6.35).020 (.508).050 (.27).300 (7.62).050 (.27).00 (2.54) 2X.00 (2.54).09 (2.77).050 (.27).00 (2.54) 2X.00 (2.54).083 (2.).050 (.27).00 (2.54) 3X.00 (2.54).83 (4.65).050 (.27).00 (2.54) TY.83 (4.65).300 (7.62) (8.6) 5 I OTOR.020 (.5) OTOR (24.5) 25 I (.27).020 (.5) OTOR.265 (32.3) 37 I OTOR (38.48) 69 I.250 (6.35) (2.54) TY.050 (.27) 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

71 icro- W-R Right ngle Thru-ole rinted ircuit oard onnectors IRO- R oard ount onnector ayouts in onnectors atterns shown are for connector mounting side of board. 9 Thru 69 ontacts.096 (2.44) iameter ounting oles, in.25 (3.8) iameter OTOR.400 (0.6).400 (0.6).275 (6.99) 7X.00 (2.54).275 (6.99) 7X.00 (2.54).00 (2.54) TY.00 (2.54) TY 75 I I (45.72) (2.54) TY.050 (.27) TY 30 I OTOR (2.54) TY.228 (5.79).050 (.27) TY.705 (4.3) 2.50 (54.6) OTOR.300 (7.62).200 (5.08) 2XØ.25 (3.8) 5X.00 (2.54) IX icro- 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

72 icro- icro- W-R Right ngle Thru-ole rinted ircuit oard onnectors IX IRO- R oard ount onnector ayouts Socket onnectors atterns shown are for connector mounting side of board. 9 Thru 69 ontacts.096 (2.44) iameter ounting oles, in.25 (3.8) iameter.050 (.27).00 (2.54).00 (2.54).083 (2.).050 (.27).00 (2.54) (4.35) 9 SOT OTOR.020 (.058).250 (6.35) 2X.00 (2.54).083 (2.).020 (.5).865 (.97).050 (.27).00 (2.54) 3X.00 (2.54).58 (4.03) 2 SOT (28.32) 3 SOT OTOR OTOR.250 (6.35).020 (.5) 4X OTOR SOT.250 (6.35) (.27).00 (2.54) 2X.00 (2.54).09 (2.77).050 (.27).00 (2.54) 2X.00 (2.54).083 (2.).050 (.27).00 (2.54) 3X.00 (2.54).83 (4.65).050 (.27).00 (2.54) TY.83 (4.65).300 (7.62) (8.6) 5 SOT (24.5) 25 SOT (32.3) OTOR.020 (.5).250 (6.35) OTOR.250 (6.35).020 (.5) OTOR SOT (38.48).020 (.5).250 (6.35) OTOR.00 (2.54) TY 69 SOT.050 (.27) 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

73 icro- W-R Right ngle Thru-ole rinted ircuit oard onnectors IRO- R oard ount onnector ayouts Socket onnectors atterns shown are for connector mounting side of board. 9 Thru 69 ontacts.096 (2.44) iameter ounting oles, in.25 (3.8) iameter.400 (0.6) 7X.00 (2.54) 7X.00 (2.54) OTOR 75 SOT.025 (.635) (2.54) TY.050(.27) TY.800 (45.72) 00 SOT (54.6) OTOR (2.54) TY.050 (.27) TY.705 (4.3) OTOR.00 (2.54) TY 30 SOT.050 (.27) TY.228 (5.79).200 (5.08).200 (5.08).400 (0.6).275 (6.99).300 (7.62) 2XØ.25 (3.8) 5X.00 (2.54).275 IX icro- 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

74 icro- icro- W-S Vertical oard ount rinted ircuit oard onnector ow To Order S Style icro- onnectors Sample art umber W - 3 S Series Shell aterial and inish Insulator aterial W - Icro- etal Shell luminum Shell - admium 2 - ickel 4 - lack nodize 5 - old 6 - hem ilm Stainless Steel Shell 3 - assivated - or S - 30% lass-filled liquid crystal polymer S - 40% lass-filled polyphenylene sulfide ontact ayout 9, 5, 2, 25, 3, 37, 5, 69, 75, 00, 30 (See Table I) ontact Type - in S - Socket Termination Type ardware Option S - ondensed oard Straight o ackpost, o Threaded Insert xtended ackpost for.062" (.6), o Threaded Insert R xtended ackpost for.96" (5.0), o Threaded Insert U Threaded Insert Only, o ackposts U Short ackpost and Threaded Insert RWR OTIOS Rear anel ackposts With Threaded Inserts R7U.080" (2.0) anel R6U.25" (3.2) anel R5U.094" (2.4) anel R4U.062" (.6) anel R3U.047" (.2) anel R2U.03" (0.8) anel Tail ength.080,.0,.40,.72,.90,.250 ength in Inches ±.05 (0.38) old-lated Terminal od ode These connectors are solder-dipped in 60/40 tin-lead solder. To delete the solder dip and change to gold-plated terminals, add code 53 igh erformance These connectors feature gold-plated Twistin contacts for best performance. tails are.020 inch diameter. Specify nickel-plated shells or cadmium plated shells for best availability. Solder-ipped Terminals are coated with Sn60/b40 tin-lead solder for best solderability. Optional gold-plated terminals are available for RoS compliance. Rear ountable an be installed through panels up to.25 inch thick. Specify rear panel mount jackposts. See ages -22 and -23 ackscrew Options ex ead ackscrews S Slot ead ackscrews IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

75 ayout In. icro- W-S Vertical oard ount rinted ircuit oard onnector Table I: imensions ax. ax. ax. ax. ax. In. ±.005 ± (0.6) In. In. In. In. ±.003 TI T ±.05 (0.38) ± 0.08 Ø.020 (0.5) ±.002 (0.05) S S S S S S S S S S S erformance Specifications urrent Rating 3 WV 600 V Sea level Insulation Resistance 5000 egohms inimum ontact Resistance 8 illiohms aximum ow evel ontact Resist. 32 illiohms aximum agnetic ermeability 2 µ aximum Operating Temperature -55. to +50. Shock, Vibration 50 g., 20g. ating orce (0 Ounces) X (# of ontacts) onnector Shell Insulator, Tray Interfacial Seal in ontact Socket ontact Terminals ardware ncapsulant aterials and inishes In. luminum lloy 606 or Stainless Steel, 300 Series, passivated. See Ordering Info for lating Options iquid rystal olymer () olyphenylene Sulfide (S) luorosilicone Rubber, lue opper lloy, old over ickel lating opper lloy, old Over ickel lating old lated opper lloy, Solder ipped 300 Series Stainless Steel poxy Resin ysol 425 IX icro- 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

76 icro- icro- W-S Vertical oard ount ardware IX.60 (4.) I. (9-69 IS).225 (5.7) I. (75-30 I) U Style ackpost with Threaded Insert.60 (4.) I. (9-69 IS).225 (5.7) I. (75-30 IS) Style Thru-ole, o ardware RU Style ackpost or Rear anel ounting, with Threaded Insert IRO- S oard ount onnector ardware Options ITR 9-69 OTTS.096/.088 (2.44/2.24) 75, 00, 30 OTTS.50/.45 (3.8/3.68) ardware Option 2-56 U U-2 U Style Threaded Insert 9 69 ontacts ontacts.90 /.85 (4.8 / 4.7).25 (3.2) X.90 (4.8) X. it art umber it onsists of Two ackposts 4-40 U-2.85 /.75 (4.7 / 4.5) 4-40 U OTTS O U OTTS O U-2.90 (4.8) X. it art umber it onsists of Two ackposts 9 69 ontacts ontacts.56 (4.0) I.050 (.3).87 (4.8) X.88 ± ± (2.2)-56.2 (2.8)-40 (4.8 ± 0.3) (4.6 ± 0.3) U-2 U-2.380/ /.345 (9.65/8.89).9 (3.0) (9.53/8.76).40 (3.6) anel Thickness art umber.086 (2.2)-56 U-2 ±.003 (0.08) ardware Option.87 (4.7) I anel Thickness.050 (.3).2 (2.8)-40 U-2 art umber ±.003 (0.08) R2U /32 (0.8) (0.6) R2U /32 (0.8) (0.6) R3U 3/64 (.2) (.0) R3U 3/64 (.2) (.0) R4U /6 (.6) (.4) R4U /6 (.6) (.4) R5U 3/32 (2.4) (2.2) R5U 3/32 (2.4) (2.2) R6U /8 (3.2) (3.0) R6U /8 (3.2) (3.0) R7U 5/64 (2.0) (.9) R7U 5/64 (2.0) (.9) 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

77 OR Style for.062" R Style for.96" ackpost it Style ex ead ackscrew with -Ring S Style Slot ead ackscrew with -Ring icro- W-S Vertical oard ount ardware IRO- S oard ount onnector ardware Options 9 69 ontacts ontacts.90 /.85 (4.8 / 4.7) 2-56 U-2.595/.565 (5./4.4) R.685/.655 (7.4/6.6) it art umber R it art umber it onsists of 2 ackposts, 2 uts, 2 Washers it art umber R it art umber it onsists of 2 ackposts, 2 uts, 2 Washers 9 69 ontacts ontacts.063 X.503 (2.8) it art umber it onsists of 2 ackscrews and 2 -Rings it art umber it onsists of 2 ackscrews and 2 -Rings 9 69 ontacts ontacts.027 (0.7) SOT.503 (2.8).25 (3.2) X 2-56 U-2 OWSR UT.54 (3.9) X.25 (3.2) I..085 (2.2).084 (2.) -RI 2-56 U-2.25 (3.2) I..085 (2.2).084 (2.) -RI 2-56 U-2 it art umber it onsists of 2 ackscrews and 2 -Rings.85 /.75 (4.7 / 4.4) 4-40 U-2.685/.655 (7.4/6.6) R.785/.755 (9.9/9.2).063 X.606 (5.4).035 (0.9) SOT.606 (5.4).87 (4.7) X 4-40 U-2 OWSR UT.87 (4.7) X.87 (4.7) I..098 (2.5).40 (3.6) -RI 4-40 U-2.87 (4.7) I..098 (2.5).40 (3.6) -RI 4-40 U-2 it art umber it onsists of 2 ackscrews and 2 -Rings IX icro- 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

78 icro- icro- W-S Vertical oard ount ayouts IRO- S oard ount onnector ayouts in onnectors.00 (2.54) TY TY.050 (.27) TY.025 (0.64) TY.83(4.65) TY.038 (0.96) R.00 (2.54) TY TY.050 (.27) TY.025 (0.64) TY.83(4.65) TY.038 (0.96) R.00 (2.54) TY TY.050 (.27) TY.025 (0.64) TY.83(4.65) TY.038 (0.96) R atterns shown are for connector mounting side of board (5.08).565 (4.35) 9 I (2.7) R.865 (2.97) 2 I.225(5.72) (9.05) R.5 (28.32) (2.44) I TY.225 (5.72).096 (2.44) I TY.225 (5.72).096 (2.44) I TY.83(4.65) TY.00 (2.54) TY TY.050 (.27) TY.025 (0.64) TY.038 (0.96) R.00 (2.54) TY TY.050 (.27) TY.025 (0.64) TY.83(4.65) TY.038 (0.96) R (8.89) R.75 (8.6) I (5.24) R.965 (24.5) 25 I 3 I 37 I TY.0375 (0.95) TY.00 (2.54) TY TY.050 (.27) TY.025 (0.64) TY.83(4.65) TY.096 (2.44) I TY (5.9) TY (.750)(9.05).25 (30.86).038 (0.96) R (22.86) R.265 (32.3) (5.72) (2.44) I TY (5.72).096 (2.44) I TY.225 (5.72).096 (2.44) I TY IX 5 I 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

79 icro- W-S Vertical oard ount ayouts IRO- S oard ount onnector ayouts in onnectors atterns shown are for connector mounting side of board. 4X TY.25 (6.38).309 (7.85).037 (.94).25 (3.8) I TY.25 (3.8) I TY.0375 (.95) TY (38.48) 69 I (43.3) 75 I.800 (45.72).040 (.06) I TY.096 (2.44) I TY 4X.25 (3.8) I TY (4.76) (0.95) TY.282 TY (7.4) 00 I.0375 (.95) (54.6) 30 I 5X.875 (4.76).269 (6.83) IX icro- 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

80 icro- icro- W-S Vertical oard ount ayouts IX IRO- S oard ount onnector ayouts Socket onnectors.00 (2.54) TY TY.050 (.27) TY.025 (0.64) TY.83(4.65) TY.038 (0.96) R.00 (2.54) TY TY.050 (.27) TY.025 (0.64) TY.83(4.65) TY.038 (0.96) R.00 (2.54) TY TY.050 (.27) TY.025 (0.64) TY.83(4.65) TY 038 (0.96) R atterns shown are for connector mounting side of board (5.08).565 (4.35) 9 SOT (2.7) R SOT.225(5.72) TY.0375 (0.95) TY (9.05) R.5 (28.32).096 (2.44) I TY.225 (5.72).096 (2.44) I TY.225 (5.72).096 (2.44 I TY.83(4.65) TY.00 (2.54) TY TY.050 (.27) TY.025 (0.64) TY.038 (0.96) R.00 (2.54) TY TY.050 (.27) TY.025 (0.64) TY.83(4.65) TY.038 (0.96) R (8.89) R.75 (8.6) 5 SOT (24.5) (5.24) R 25 SOT 3 SOT 37 SOT.096 (2.44) I TY (5.9) TY (.750)(9.05) 8.25 (30.86) 5 SOT.00 (2.54) TY TY.050 (.27) TY.025 (0.64) TY.83(4.65) TY.038 (0.96) R (5.72) (22.86) R.265 (32.3).096 (2.44) I TY.225 (5.72).096 (2.44) I TY.225 (5.72).096 (2.44) I TY 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

81 icro- W-S Vertical oard ount ayouts IRO- S oard ount onnector ayouts Socket onnectors atterns shown are for connector mounting side of board..309 (7.85) 4X TY.25 (6.38).037 (.94).25 (3.8) I TY 2Xø.25 (3.8) (.95) TY (38.48) 69 SOT (0.95) TY TY.705 (43.3) 75 SOT.800 (45.72 ) SOT (.95) (.9 ) (54.6) 30 SOT (2.44) I TY 4X 2Xø.25 (3.8).875 (4.76).282 (7.4) 5X.269 (6.83).875 (4.76) IX icro- 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

82 icro- icro- W-SR Surface ount Right ngle rinted ircuit oard onnectors IX Twistin ontact Insulator luminum Shell poxy otting lastic lignment Strip Integral ounting eg in onnector Surface ount icro- These connectors feature.025 inch terminal spacing and an alignment strip for accurate registration. The integral mounting legs provide a ground path. 9 To 5 ontacts These compact connectors are lighter and smaller than comparable thru-hole versions. il Spec Reliability Suitable for mission-critical requirements, These high performance connectors meet the requirements of I-T Socket ontact lourosilicone Interfacial Seal ow To Order Surface ount icro- onnectors luminum Shell poxy otting Insulator lastic lignment Strip Integral ounting eg Socket onnector Sample art umber mwdm 2 l 5-2 smr p n Series Shell aterial and inish Insulator aterial W lenair icro- luminum Shell Stainless Steel Shell - admium 2 - ickel 3 - assivated 4 - lack nodize 5 - old 6 - hem ilm or S - 30% lass-illed iquid rystal olymer/ S - 40% lass illed olyphenylene Sulfide ontact ayout 9, 5, 2, 25, 3, 37, 5-2 (See Table I) ontact Type - in S - Socket Termination Type SR - Surface ount Right ngle ackpost or ackscrew Option oard ounting Threaded Insert Option - Thru-ole - ackpost - ackscrew, ex ead T - Threaded Insert - Thru-ole, o Insert T - Threaded Inserts ackposts for Rear anel ounting R.032 anel R4.093 anel R2.047 anel R5.25 anel R3.062 anel R6.080 anel #2-56 Insert.60 (4.06) ax 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

83 ayout.324 (8.23).58 (4.76) In..492 (2.47) icro- W-SR Surface ount Right ngle imensions.025 (0.64) TY Table I: imensions ax. ax. ax. In. ±.005 OST, TR ISRT: #2-56 U-2 TRS TRU-O:.096 ±.005 (2.43 ± 0.3) Ø.008 ±.00 (0.20 ± 0.03) ± (4.50) In. In S S S S S S S (5.69).093 ±.005 (2.36 ± 0.3).200 (5.08) TY.094 (2.39).070 ax.008±.005 (0.20± 0.08) In. ±.003 ± 0.08 IX icro- 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

84 icro- icro- W-SR Surface ount Right ngle ardware Surface ount IRO- ardware Options R Thru R6 Thru-ole o jackpost supplied Standard ackpost actory installed with nut and lockwasher ackpost for Rear anel ounting Shipped loosely installed. Install with permanent threadlocking compund. T T ackscrew, ex rive ttached with e-ring Threaded Insert #2-56 Thread oard ount Threaded Insert urrent Rating WV erformance Specifications 600 V Sea level onnector Shell aterials nd inishes luminum lloy 606.See Ordering Info for lating Options Insulation Resistance 5000 egohms inimum ontact Resistance 8 illiohms aximum ow evel ontact Resist. 32 illiohms aximum agnetic ermeability 2 µ aximum Operating Temperature -55. to +50. Shock, Vibration 50 g., 20g. ating orce (0 Ounces) X (# of ontacts) Insulators Interfacial Seal in ontact Socket ontact Terminals ardware iquid rystal olymer ()/olyphenylene Sulfide (S) luorosilicone Rubber, lue eryllium opper old over ickel lating opper lloy old Over ickel lating old lated opper lloy, Solder ipped 300 Series Stainless Steel IX ncapsulant poxy Resin ysol lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

85 9 ontacts 5 ontacts 2 ontacts 25 ontacts 3 ontacts 37 ontacts 5 ontacts icro- W-SR Surface ount Right ngle ayouts Suggested rinted ircuit oard ayout Socket in SR Surface ount onnector ayouts Socket in Socket in Socket in Socket in Socket (0.30 ayout ROT O OTOR.74 (4.42) Ø.093 (2.36).025 (0.64) TY.07 (0.43).60 (4.06).492(2.47) In. In in Socket in IX icro- 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

86 icro- icro- R7580 Vertical ount rinted ircuit oard onnectors IX Save Space On Your ircuit oard These icro- connectors feature.075 X.075 inch terminal spacing. lenair's R7580 offers significant size and weight savings compared to traditional.00" pitch connectors. igh erformance R7580 connectors meet the performance requirements of I-T old-plated Twistin contacts assure best performance. Table I: ackpost Options and R U, SU, S OR Thru-ole ackpost it.062 (.6) R.96 (5.0) ow To Order R7580 Vertical ount onnectors Sample art umber R S 2 53 Series R icro- Vertical ount onnector ontact ayout 9, 5, 2, 25, 3, 37, 5, 00 (See Table II) ontact Type - in S - Socket -.09" (2.76) " (3.8) " (4.83) Tail ength Inches (mm) " (6.35) 5 - Staggered Tail ength ength in Inches ±.05 (0.38) luminum Shell Stainless Steel Shell Shell lating inish - admium - ickel - assivated - llochrome - lack nodize - old ardware Option old-lated Terminal od ode - o ackpost, o Threaded Insert - xtended ackpost or.062" (.6), o Threaded Insert R - xtended ackpost or.96" (5.0), o Threaded Insert U - Threaded insert only, no jackposts - etric Threaded Insert Only, o ackposts SU - Short ackpost and Threaded Insert S - Short ackpost and etric Threaded Insert (See Table I) These connectors are solder-dipped in 60/40 tin-lead solder. To delete the solder-dip and change to gold-plated terminals, add code 53 Threaded Inserts Rear anel ount ackposts and Threaded Inserts U Threads etric Threads anel Thickness TU T.094" (2.4) VU V.062" (.6) WU W.047" (.2) XU X.03" (0.8) YU Y.023" (0.6) ackpost With Threaded Insert TU, VU, WU, XU, YU T, V, W, X, Y ackpost for Rear anel ounting 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

87 ayout In. icro- R7580 Vertical ount rinted ircuit oard onnectors R7580 onnector imensions ax. ax. ax. ax. ax. ax. SIZS 9 TRU 5 OUTI O R.088/096 (2.24/2.39) SIZ 00 OUTI O IS.45/.5 (3.68/3.8) In. ±.005 ± 0.3 Ø.020 (0.5) ±.002 (0.05) In. In. In. In. ±.003 TI T ±.05 (0.38) SIZS 9 TRU 5 TR SIZ IS #2-56 U OR 2 SIZ 00 TR SIZ IS #4-40 OR 3 ± 0.08 STR S In. In S S S S S S S S erformance Specifications urrent Rating 3 WV 600 V Sea level Insulation Resistance 5000 egohms inimum ontact Resistance 8 illiohms aximum ow evel ontact Resist. 32 illiohms aximum agnetic ermeability 2 µ aximum Operating Temperature -55. to +50. Shock, Vibration 50 g., 20g. ating orce (0 Ounces) X (# of ontacts) onnector Shell Insulator, Tray Interfacial Seal in ontact Socket ontact Terminals ardware ncapsulant.50 (3.8) ±.05 (0.38).050 (.27).050 (.27) aterials and inishes luminum lloy 606 or Stainless Steel, 300 Series, passivated. See Ordering Info for lating Options iquid rystal olymer () olyphenylene Sulfide (S) luorosilicone Rubber, lue opper lloy, old over ickel lating opper lloy, old Over ickel lating Tin lated opper lloy (00% Tin) 300 Series Stainless Steel poxy Resin ysol 425 IX icro- 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

88 icro- icro- R7580 Vertical ount rinted ircuit oard onnectors IX.0375 (0.95) (4.65) (3.05) R7580 onnector ayouts in onnectors atterns shown are for connector mounting side of board..33 (3.38) (4.35) (0.95).0375 (0.95) 9 I 5 I.70 (4.32) (4.65) (0.95).865 (2.97) I 25 I (28.32) (0.95) I 37 I.0375 (0.95) (30.86) (2.44) I TY (0.95).096 (2.44) I TY.096 (2.44) I TY.096 (2.44) I TY.263 (6.68) 5 I 00 I (4.65) (4.65) (0.95).965 (24.5).265 (32.3) (0.95) (45.72).70 (4.32) (0.95).75 (8.6) (0.95) (2.44) I TY (2.44) I TY.096 (2.44) I TY 9.25 (3.8) I TY.0375 (0.95) 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

89 .0375 (0.95) (4.65) (3.05) (3.38) (4.35).70 (4.32) (4.65) 4 icro- R7580 Vertical ount rinted ircuit oard onnectors R7580 onnector ayouts Socket onnectors (0.95) (2.97) (0.95) (28.32).0375 (0.95).096 (2.44) I TY (0.95).0375 (0.95) (0.95).25 (30.86) atterns shown are for connector mounting side of board..263 (6.68).70 (4.32) (0.95).75 (8.6) 9 SOT 5 SOT.096 (2.44) I TY.83 (4.65) (24.5) 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected] (0.95) 2 SOT 25 SOT.096 (2.44) I TY.83 (4.65) (0.95).265 (32.3) 3 SOT 37 SOT.096 (2.44) I TY (0.95).800 (45.72) 5 SOT 00 SOT.096 (2.44) I TY (2.44) I TY.096 (2.44) I TY.25 (3.8) I TY.0375 (0.95) IX icro-

90 icro- icro- R7590 Right ngle ount rinted ircuit oard onnectors Series Save Space On Your ircuit oard These icro- connectors feature.075 X.075 inch terminal spacing. lenair's R7590 offers size and weight savings compared to traditional.00" pitch connectors. igh erformance R7590 connectors meet the performance requirements of I-T old plated Twistin contacts assure best electrical and mechanical performance. Table I: ackpost Options U, S SU, S o ackpost, o Threaded Insert In tng ole o ackpost, Threaded Insert In ounting ole ow To Order R7590 onnectors Sample art umber R s 2 b su 53 R7590 Right ngle ount onnector ontact ayout 9, 5, 2, 25, 3, 37, 5, 00, ontact Type - in S - Socket Tail ength in Inches () Shell lating inish ackpost Options old-lated Terminal od ode -.09" (2.76) " (3.8) " (4.83) " (6.35) 5 - Staggered Tail ength ength in Inches ±.05 (0.38) luminum Shell Stainless Steel Shell - admium - ickel - llochrome - assivated - lack nodize - old - o ackpost, o Threaded Insert U - Threaded Insert Only, o ackposts - etric Threaded Insert Only, o ackposts SU - Short ackpost and threaded Insert S - Short ackpost and etric Threaded Insert S - Short ackpost, o Threaded Insert (See Table I) These connectors are solder-dipped in 60/40 tin-lead solder. To delete the solder dip and change to gold-plated terminals, add code 53 ackpost Installed, o Threaded Insert in ounting ole Rear anel ount ackposts and Threaded Inserts U Threads etric Threads anel Thickness TU T.094" (2.4) VU V.062" (.6) WU W.047" (.2) XU X.03" (0.8) YU Y.023" (0.6) ackpost With Threaded Insert TU,VU,WU,XU,YU T,V,W,X,Y ackpost for Rear anel ounting IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

91 ayout In. icro- R7590 Right ngle ount rinted ircuit oard onnectors Table II: imensions ax. ax. ax. ax. ax. SIZS 9 TRU 5 OUTI O IS.088/096 (2.24/2.39) SIZ 00 OUTI O IS.45/.5 (3.68/3.8) In. ±.005 ± 0.3 TI T ±.05 (0.38) In. In. In. In. ± (3.8) ±.05 (0.38) ± (.27).050 (.27) STR S SIZS 9 TRU 5 TR SIZ IS #2-56 U OR 2. SIZ 00 TR SIZ IS #4-40 OR S S S S S S S S erformance Specifications urrent Rating 3 WV 600 V Sea level Insulation Resistance 5000 egohms inimum ontact Resistance 8 illiohms aximum ow evel ontact Resist. 32 illiohms aximum agnetic ermeability 2 µ aximum Operating Temperature -55. to +50. Shock, Vibration 50 g., 20g. ating orce (0 Ounces) X (# of ontacts) onnector Shell Insulator, Tray Interfacial Seal in ontact Socket ontact Terminals ardware ncapsulant In. In. ±.00 ±0.25 aterials and inishes luminum lloy 606 or Stainless Steel, 300 Series, passivated. See Ordering Info for lating Options iquid rystal olymer () olyphenylene Sulfide (S) luorosilicone Rubber, lue opper lloy, old over ickel lating opper lloy, old Over ickel lating Tin lated opper lloy Sn60/b Series Stainless Steel poxy Resin ysol 425 IX icro- 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

92 icro- icro- R7590 Right ngle ount rinted ircuit oard onnectors IX 7 R7590 onnector ayouts in onnectors.33 (3.38) (4.35).70 (4.32) atterns shown are for connector mounting side of board (0.95).250 (6.35).0375 (0.95).70 (4.32) (0.95).75 (8.6) 9 I 5 I OTOR (4.65) (0.95).865 (2.97) (6.35) 2 I 25 I.5 (28.32) OTOR (4.65) (0.95) (6.35) 3 I 37 I.25 (30.86) OTOR OTOR (0.95) (2.44) I TY (0.95).096 (2.44) I TY.300 (7.62).096 (2.44) I TY 5 I 00 I (6.68) (4.65) (0.95).965 (24.5).265 (32.3) (6.35) (6.35) OTOR.096 (2.44) I TY.250 (6.35) (0.95) (0.95) (2.44) I TY (3.6).0375 (0.95) I TY (45.72) 8 OTOR OTOR OTOR.83 (4.65).096 (2.44) I TY (2.44) I TY (0.6) 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

93 .20 (3.05).83 (4.65) R7590 onnector ayouts Socket onnectors OTOR (3.38) (4.35) atterns shown are for connector mounting side of board (0.95).250 (6.35).0375 (0.95) OTOR.70 (4.32) (0.95).75 (8.6) 9 SOT 5 SOT.70 (4.32) (4.65) 4 2 OTOR (2.97) (0.95).250 (6.35) (24.5) 2 SOT 25 SOT (0.95).5 (28.32) OTOR.250 (6.35) 3 SOT 37 SOT.0375 (0.95) icro- R7590 Right ngle ount rinted ircuit oard onnectors (0.95) (30.86) (2.44) I TY OTOR (2.44) I TY.300 (7.62).096 (2.44) I TY.096 (2.44) I TY 5 SOT 00 SOT (0.95).83 (4.65) (32.3) (6.35) (6.68) (0.95) OTOR.096 (2.44).83 (4.65) I TY (0.95) (45.72) (6.35) OTOR.096 (2.44) I TY.250 (6.35) OTOR (2.44) I TY (0.6).0375 (0.95).25(3.8) I TY IX icro- 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

94 icro- icro- R7580 ompact lange Vertical ount rinted ircuit oard onnector Innovative esign for lex ircuits These icro- connectors answer the need for a compact flex circuit connector. eaturing.075 X.075 inch row spacing. lenair's R7580 accepts standard jackscrews and jackposts, making it ideal for flex-to-board applications. igh erformance R7580 connectors meet the performance requirements of I-T old-plated Twistin contacts assure best electrical and mechanical performance. Table I: ounting ardware S S R Thru-ole Order ardware Separately ackpost Removable Includes ut and Washer ackscrew ex ead Removable -ring ow To Order R7580 Vertical.075" itch onnectors Sample art umber R s 2 b s 53 Series ontact ayout ontact Type - in S - Socket Tail ength in Inches () Shell lating inish R7580 icro- etal Shell, Vertical ount, ompact 9, 5, 2, 25, 3, 37, 5, 00 (Table II) -.09" (2.76) " (3.8) " (4.83) " (6.35) 5 - Staggered Tail ength ength in Inches ±.05 (0.38) luminum Shell Stainless Steel Shell - admium - ickel - llochrome - assivated - lack nodize - old ounting ardware,,,, S, S,,,, R (See Table I) old-lated Terminal od ode These connectors are solder-dipped in 60/40 tin-lead solder. To delete the solder dip and change to gold-plated terminals, add code 53 ackscrew ex ead Removable -ring xtended ackscrew Slot ead Removable -ring ackscrew Slot ead Removable -ring xtended ackscrew ex ead on- Removable ackscrew Slot ead on- Removable xtended loat ount or ront anel ounting loat ount or Rear anel ounting IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

95 ayout In. icro- R7580 ompact lange Vertical ount rinted ircuit oard onnector SIZS 9 TRU 5 OUTI O IS.088/096 (2.24/2.39) SIZ 00 OUTI O IS.45/.5 (3.68/3.8) Table II: imensions ax. ax. ax. ax. ax. ax. In. ±.005 ± 0.3 In. In. In. In. ±.003 ± 0.08 In. In S S S S S S S S erformance Specifications urrent Rating 3 WV 600 V Sea level Insulation Resistance 5000 egohms inimum ontact Resistance 8 illiohms aximum ow evel ontact Resist. 32v illiohms aximum agnetic ermeability 2 µ aximum Operating Temperature -55. to +50. Shock, Vibration 50 g., 20g. ating orce (0 Ounces) X (# of ontacts).00 (25.4) Ø.020 (0.5) ±.002 (0.05) SIZS 9 TRU 5 TR SIZ IS #2-56 U SIZ 00 TR SIZ IS #4-40 onnector Shell Insulator, Tray Interfacial Seal in ontact Socket ontact Terminals ardware ncapsulant STR S.50 (3.8) ±.05 (0.38).050 (.27).050 (.27) aterials and inishes luminum lloy 606 or Stainless Steel, 300 Series, passivated. See Ordering Info for lating Options iquid rystal olymer () olyphenylene Sulfide (S) luorosilicone Rubber, lue opper lloy, old over ickel lating opper lloy, old Over ickel lating Tin lated opper lloy (00% Tin) 300 Series Stainless Steel poxy Resin ysol 425 IX icro- 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

96 icro- icro- R7580 ompact lange Vertical ount rinted ircuit oard onnector R7580 onnector ayouts in onnectors 7 8 atterns shown are for connector mounting side of board (0.95) 9 I 5 I (0.95) I 25 I (0.95) 6 3 I 37 I (0.95) (0.95) (0.95) (0.95) (0.95) IX 5 I 00 I 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

97 icro- R7580 ompact lange Vertical ount rinted ircuit oard onnector (0.95) (0.95) (0.95).0375 (0.95) R7580 onnector ayouts Socket onnectors atterns shown are for connector mounting side of board (0.95) 9 SOT 5 SOT (0.95) SOT 25 SOT (0.95) 3 SOT 37 SOT (0.95) (0.95) SOT 00 SOT IX icro- 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

98 icro- icro- R7590 ompact lange Right ngle ount rinted ircuit oard onnector Innovative esign for lex ircuits These icro- connectors answer the need for a compact flex circuit connector. eaturing.075 X.075 inch row spacing. lenair's R7590 accepts standard jackscrews and jackposts, making it ideal for flex-to-board applications. igh erformance R7590 connectors meet the performance requirements of I-T old plated Twistin contacts assure best electrical and mechanical performance. ow To Order R7590 onnectors Sample art umber gmr7590c -3 s 2 b s 53 Series ontact ayout ontact Type - in S - Socket Tail ength in Inches () Shell lating inish R7590 icro- Right ngle ount onnector 9, 5, 2, 25, 3, 37, 5, 00 (See Table Ii) -.09" (2.76) " (3.8) " (4.83) " (6.35) 5 - Staggered Tail ength ength in Inches ±.05 (0.38) luminum Shell - admium - ickel - llochrome - lack nodize - old ardware,,,, S, S,,,, R (See Table I) old-lated Terminal od ode Stainless Steel Shell - assivated These connectors are solder-dipped in 60/40 tin-lead solder. To delete the solder dip and change to gold-plated terminals, add code 53 Table I: ounting ardware S S R Thru-ole Order ardware Separately ackpost Removable Includes ut and Washer ackscrew ex ead Removable -ring ackscrew ex ead Removable -ring xtended ackscrew Slot ead Removable -ring ackscrew Slot ead Removable -ring xtended ackscrew ex ead on- Removable ackscrew Slot ead on- Removable xtended loat ount or ront anel ounting loat ount or Rear anel ounting IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

99 ayout In. icro- R7590 ompact lange Right ngle ount rinted ircuit oard onnector Table II: imensions ax. ax. ax. ax. ax. In. ±.005 ± (25.4) Ø.020 (0.5) ±.002 (0.05) In. In. In. In. ± (.27).050 (.27) STR S ± 0.08 In..50 (3.8) ±.05 (0.38) SIZS 9 TRU 5 OUTI O IS.088/096 (2.24/2.39) SIZ 00 OUTI O IS.45/.5 (3.68/3.8) SIZS 9 TRU 5 TR SIZ IS #2-56 U SIZ 00 TR SIZ IS #4-40 In. ± S S S S S S S S erformance Specifications urrent Rating 3 WV 600 V Sea level Insulation Resistance 5000 egohms inimum ontact Resistance 8 illiohms aximum ow evel ontact Resist. 32 illiohms aximum agnetic ermeability 2 µ aximum Operating Temperature -55. to +50. Shock, Vibration 50 g., 20g. ating orce (0 Ounces) X (# of ontacts) onnector Shell Insulator, Tray Interfacial Seal in ontact Socket ontact Terminals ardware ncapsulant ±0.25 aterials and inishes luminum lloy 606 or Stainless Steel, 300 Series, passivated. See Ordering Info for lating Options iquid rystal olymer () olyphenylene Sulfide (S) luorosilicone Rubber, lue opper lloy, old over ickel lating opper lloy, old Over ickel lating Tin lated opper lloy (00% Tin) 300 Series Stainless Steel poxy Resin ysol 425 IX icro- 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

100 icro- icro- R7590 ompact lange Right ngle ount rinted ircuit oard onnector IX OTOR atterns shown are for connector mounting side of board (0.95).22 (5.40) OTOR (0.95) (4.45) OTOR (0.95).75 (4.45) 6 OTOR R7590 onnector ayouts in onnectors (0.95).87 (4.75) OTOR (0.95) (4.45) 3 OTOR (0.95) (4.45) 9 OTOR OTOR I 5 I 2 I 25 I 3 I 37 I (0.95) (0.95) 5 I 00 I (4.45) (5.38) 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

101 icro- R7590 ompact lange Right ngle ount rinted ircuit oard onnector OTOR atterns shown are for connector mounting side of board..22 (5.40).33 (3.38) (0.95) OTOR (0.95).75(4.45) OTOR (0.95).75(4.45) R7590 onnector ayouts Socket onnectors (0.95) 26 OTOR (4.75) OTOR (0.95) 7.75(4.45) OTOR (0.95) (4.45) OTOR (0.95) (0.95) 9 SOT 5 SOT 2 SOT 25 SOT 3 SOT 37 SOT 65 5 SOT 00 SOT (4.45) OTOR (5.38) IX icro- 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

102 sris gmsm IRO ow profile micro- or compact applications Turn to lenair when board space is at a premium. Our ow rofile single Row etal Shell icrominiature connectors feature machined aluminum or stainless steel shells with gold plated Twistin contacts for superior performance and a reduced footprint. Our low profile connectors are available with solder cups, insulated or solid wire pigtails in straight and right angle orientations. ll of our low profile icro rectangular connectors are available with flex circuit terminations, as well as turnkey point-to-point cordsets. lenair, Inc. 2 ir Way lendale, [email protected]

103 Section ow rofile Single Row etal Shell icrominiature icro- Single Row S Solder up onnectors age -2 S Insulated Wire igtails age -2 S Solid Wire igtails age -3 S Right ngle age -5 roduct Selection uide onnector height is a priority for miniaturized electronics modules. These S connectors are shorter and occupy less board real estate than comparable two row icro- connectors. Solder up, re-wired and Versions feature gold-plated Twistin contacts, machined aluminum shells, and are fully potted with epoxy. The glass-filled thermoplastic trays will withstand soldering heat without damage. ight ontact rrangements hoose from 4 to 35 contacts. vailable in a variety of finishes, the socket connectors are fitted with luorosilicone interfacial seals. S Solder up onnectors onremovable solder cup contacts for termination to #26 W or smaller wire,.050" contact spacing, eight layouts from 4 to 35 contacts. S re-wired igtails rimp contacts are terminated to insulated Teflon wire. onnectors are backpotted with epoxy, providing strain relief and environmental protection. S with Solid Uninsulated Wire old-plated or solder-dipped solid copper wire, crimp termination, backpotted with epoxy. an be terminated to flexible circuits. S RIght ngle rinted ircuit oard.075 inch by.00 inch terminal spacing, for thru-hole rigid or flexible circuits. One piece threaded inserts provide a ground path from the jackpost to the board. IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

104 icro- Single Row S Solder up, re-wired and Solid Wire Single Row onnector ow rofile etal Shell icrominiature Solder up Insulated Wire igtails S onnectors offer mil spec design and performance in a smaller form factor. These S single row connectors are reduced in height compared to two-row icro- connectors. S onnectors feature gold plated Twistin contacts, machined aluminum shells, and are fully potted with epoxy. hoose from 4 to 35 contacts. vailable in a variety of finishes, socket connectors are fitted with luorosilicone interfacial seals. ow To Order Solder up onnectors Sample art umber msm - 5 p s b Series Shell inish S lenair etal Shell icrominiature luminum Shell - admium 2 - ickel 4 - lack nodize 5 - old 6 - hem ilm ontact ayout 4, 6, 0, 5, 20, 25, 30, 35 (See Table II) ontact Type - in S - Socket Termination Type S - Solder up ardware,,,, S, S,,,, R (See Table I) ow To Order Insulated Wire onnector Stainless Steel Shell 3 - assivated Sample art umber S Series S lenair etal Shell icrominiature luminum Shell Stainless Steel Shell - admium 3 - assivated Shell inish 2 - ickel 4 - lack nodized 5 - old 6 - hem ilm umber of ontacts 4, 6, 0, 5, 20, 25, 30, 35 (See Table II) ontact Type - in, S - Socket Wire age (W) 4 - # # #28 W / 600 Vrms Teflon (T) Wire Type /33600 Vrms odified ross-inked Tefzel (T) Vrms Type 6878/4 (T) - White 2 - Yellow Wire olor ode 5 - olor-oded Stripes er I-ST olor Repeating Wire ength Inches 8 - Wire ength In Inches. 8 Specifies 8 Inches. ardware,,,, S, S,,,, R (See Table I) IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

105 S Solder up, re-wired and Solid Wire Single Row onnector ow rofile etal Shell icrominiature icro- Single Row old lated or Solder ipped Solid eads Table I: ounting ardware S S R Thru-ole Order ardware Separately ackpost Removable Includes ut and Washer ackscrew ex ead Removable -ring ow To Order Uninsulated Wire onnector Sample art umber S Series ackscrew ex ead Removable -ring xtended S lenair etal Shell icrominiature luminum Shell Stainless Steel Shell - admium 3 - assivated Shell inish 2 - ickel 4 - lack nodized 5 - old 6 - hem ilm umber of ontacts 4, 6, 0, 5, 20, 25, 30, 35 (See Table II) ontact Type - in, S - Socket Wire age (W) 4 - # # #26 Wire Type - opper Wire Wire inish 3 - Solder ipped (60/40/Tin/lead) 4 - old lated Wire ength Inches.25,.250,.375,.500,.750,.000, Wire ength In Inches..500 Specifies alf Inch. ardware,,,, S, S,,,, R (See Table I) ackscrew Slot ead Removable -ring ackscrew Slot ead Removable -ring xtended ackscrew ex ead on- Removable ackscrew Slot ead on- Removable xtended loat ount or ront anel ounting loat ount or Rear anel ounting IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

106 icro- Single Row S Solder up, re-wired and Solid Wire Single Row onnector imensions IX ayout.22±.005 (3.0 ± 0.05) In. 2 x ounting oles ø. 088/.094 (2.24/2.39) Table II: imensions ax. ax. ax. ax. ax. ax. ax. ax. In. ±.003 ± (2.5)ax In. In. In. In. In. In. In S S S S S S S S (4.5) R (2.) O..94 (4.94) X. in Socket ace View of in (lug) onnector ace View of Socket (Receptacle) onnector ISUT WIR T +.00/-0.00 (+2.54/-0.00) UISUT WIR T ± (0.76) (2.) O..94 (4.94) X. 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

107 S Right ngle Single Row onnector ow rofile etal Shell icrominiature icro- Single Row Table I: ounting ardware U SU TU, VU, WU, XU, YU o ackpost, Threaded Insert In ounting ole ow To Order S Right ngle onnector ackpost With Threaded Insert ow rofile S Single Row icro onnectors offer mil spec design and performance in a smaller form factor for space savings. These S connectors are shorter and occupy less board real estate than comparable two row icro- connectors. S onnectors feature gold-plated Twistin contacts, machined aluminum shells, and are fully potted with epoxy. hoose from 4 to 35 contacts. vailable in a variety of finishes, socket connectors are fitted with luorosilicone interfacial seals. Sample art umber S 2-0 p cbr su Series S luminum Shell Stainless Steel Shell - admium 3 - assivated Shell inish 2 - ickel 4 - lack nodize 5 - old 6 - hem ilm ontact ayout 4, 6, 0, 5, 20, 25, 30, 35 (See Table II) ontact Type - in S - Socket Termination Style R - Right ngle U - Threaded Insert Only, o ackposts SU - ackpost and Threaded Insert ardware Option (See Table I) Tail ength -.09 (2.8) (3.8) (4.8) (6.3) Rear anel ackposts with Threaded Inserts TU " (2.4) anel VU " (.6) anel WU " (.2) anel XU " (0.8) anel YU " (0.6) anel ackpost for Rear anel ounting IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

108 icro- Single Row S Right ngle Single Row onnector ow rofile etal Shell icrominiature IX.40 (3.55) ayout In. Table II: imensions ax. ax. ax. ax. ax. ax. #2-56 U 2 TS. 2 S..00 (2.54) RIUS In. ±.003 ± ( 0.5) iameter ace View of in (lug) onnector ace View of Socket (Receptacle) onnector In. In. In. In. In. In. ±.004 ± S S S S S S S S in TI T ±.05 (0.38) Socket In. ±.00 ± lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

109 S Right ngle Single Row onnector ow rofile etal Shell icrominiature icro- Single Row.250 (6.35) TO ROT O.250 (6.35) TO ROT O.0375 (0.95).0375 (0.95).050 (.27).050 (.27) (2.44) I..096 (2.44) I (4.5).63(4.5).00 (2.54).00 (2.54).478 (2.).578 (4.65) 4 I 6 I.250 (6.35) TO ROT O.0375 (0.95).050 (.27) (2.44) I (4.5).00 (2.54).777 (9.73) 0 I S ayouts in onnectors.250 (6.35) TO ROT O.0375 (0.95).050 (.27) (2.44) I (4.5).00 (2.54).277 (32.43).250 (6.35) TO ROT O.0375 (0.95).050 (.27) (2.44) I (4.5).00 (2.54).027 (26.08) 20 I.250 (6.35) TO ROT O.0375 (0.95).050 (.27) (2.44) I (4.5).00 (2.54).527 ( I 5 I.250 (6.35) TO ROT O.0375 (0.95).050 (.27) (2.44) I (4.5).00 (2.54).777 (45.3) 30 I.250 (6.35) TO ROT O.0375 (0.95).050 (.27) (2.44) I (4.5).00 (2.54) (5.48) 35 I IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

110 icro- Single Row S Right ngle Single Row onnector ow rofile etal Shell icrominiature IX.096 (2.44) I..096 (2.44) I..250 (6.35) TO ROT O.0375 (0.95).050 (.27).63(4.5).00 (2.54).250 (6.35) TO ROT O.63(4.5).00 (2.54).050 (.27).096 (2.44) I..250 (6.35) TO ROT O.63(4.5).00 (2.54) (.27) (9.73).096 (2.44) I..096 (2.44) I..096 (2.44) I (2.) 4 SOT 0 SOT.63(4.5).00 (2.54).63(4.5).00 (2.54) S ayouts Socket onnectors (0.95) (6.35) TO ROT O.63(4.5).00 (2.54).050 (.27) (6.35) TO ROT O.050 (.27).050 (.27) (6.35) TO ROT O (32.43) (5.48).096 (2.44) I SOT ( SOT (45.3) SOT 35 SOT.096 (2.44) I..63(4.5).00 (2.54) (6.35) TO ROT O.0375 (0.95).050 (.27).63(4.5).00 (2.54).050 (.27) (4.65).250 (6.35) TO ROT O (0.95) (0.95) (0.95) 30 6 SOT.027 (26.08).0375 (0.95) SOT.0375 (0.95) 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

111 Section ow rofile etal and lastic Shell icro- etal Shell Solder up age -3 etal Shell Stranded Wire age -5 etal Shell Solid Wired age -7 etal Shell ack-to-ack age -9 etal Shell Right ngle age - W lastic Shell Solder up age -5 W lastic Shell re-wired age -7 W lastic Shell Solid Wire age -9 W lastic ow rofile ack-to-ack age -2 W lastic Shell Right ngle age -23 roduct Selection uide etal Shell, Solder up Solder cup gold plated contacts accept #24-30 W solid or stranded wire. vailable in 9 to 5 positions. igh performance 8353 Twistin contact system. ontacts are factoryinstalled, non-removable and epoxy encapsulated. 3 mp, 600 Vac,-55 to +50. etal Shell, Stranded Wired re-wired with #24 to #30 stranded wire. vailable in 9 to 5 positions. igh performance 8353 Twistin contact system. 3 mp, 600 Vac,-55 to +50. etal Shell, Solid Wire re-wired with #24 to #30 solid wire. vailable in 9 to 5 positions. igh performance 8353 Twistin contact system. 3 mp, 600 Vac,-55 to +50. ack-to-ack Unshielded ables If a simple jumper cable is required, these cable assemblies simplify ordering. o special part numbers are necessary. vailable in all sizes. Wiring is # to #, etc. ackto-backs are built to order in any length etal Shell, Right ngle 9 to 5 positions. igh performance 8353 Twistin contact system. actoryinstalled contacts, non-removable and are encapsulated with epoxy. terminal spacing is.00" x.00" for easy board fabrication. 3 mp, 600 Vac,-55 to +50. W ll-lastic, Solder up vailable in 9 to 5 contacts. igh performance 8353 Twistin contact system, the W all-plastic connector is an economical alternative to metal shell connectors. oldplated solder cups accept #24 #30 W wire. 3 mp, 600 Vac,-55 to +50. W ll-lastic, Stranded Wire These crimp-terminated pre-wired assemblies offer an alternative to the timeconsuming job of soldering wires. #24 #30 W wire size. 3 mp, 600 Vac,-55 to +50. ll lastic, Solid Wire re-wired with #24 to #30 solid wire. vailable in 9 to 5 positions. igh performance 8353 Twistin contact system. 3 mp, 600 Vac,-55 to +50. W ll-lastic ow rofile ack-to-ack umper ables acory-terminated, contacts crimped to wire and potted with epoxy. igh performance gold-plated Twistin contacts recessed into insulator top prevent damage. 9 to 5 contacts, 3., 600 Vac, -55 to +50. IW I-T W ll-lastic, Right ngle 9 to 5 positions. igh performance 8353 Twistin contact system. actoryinstalled gold-plated tails, non-removable and epoxy encapsulated. terminal spacing is.00" x.00" for easy board fabrication. 3 mp, 600 Vac,-55 to +50. IX icro- ouble and Triple Row 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

112 icro- ouble and Triple Row ow rofile etal and lastic Shell icro- roduct Information ow rofile etal Shell onnector W ow rofile ll-lastic onnector etal Shell or One-iece lastic igh Reliability Twistin ontact System.050" itch ontact Spacing Solder up, re-wired or 3 mps, +50, 600 Vac IX ow rofile etal Shell and lastic Shell icro-'s Save Space ompared to W etal Shell onnectors ow profile metal shell and W plastic shell connectors are intended for high reliability board-to-wire I/O and wire-to-wire applications. old-plated Twistin contacts provide excellent performance when subjected to high levels of shock and vibration. lastic and metal versions are intermateable. lange height is reduced by 33% compared to W standard icro- connectors. OT: ot intermatable with Standard W Interface ontacts Insulator, W ody Shell ounting ardware otting ompound aterials and inishes opper alloy, 50 µinch gold over nickel iquid crystal polymer () luminum alloy Stainless Steel poxy Insulated Wire er I-W-22759/ and /33 Solid Wire, Tails ow rofile and W ontact rrangements er , gold plated or tinned urrent Rating ontact Resistance ielectric Withstanding Voltage Insulation Resistance Operating Temperature Specifications 3 mps Shock 50 g. Vibration 20 g. size comparison 5 in ow rofile W 5 in Standard eight ating face of pin connector. Socket connector contact numbers are reversed milliohms maximum 600 Vac sea level 5000 megohms minimum -55. to lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

113 ow profile connectors have reduced flange height compared to standard W icro- connectors. These.050" pitch solder cup icro- connectors accept #26 to #30 gage wire with standard contacts and up to size #24 wire with large bore contacts. ontacts are factory-installed and potted with epoxy. in contacts are gold-plated high performance Twistin type and are recessed into insulator to prevent damage. Socket contacts are gold plated, machined copper alloy. achined aluminum shell. lass-filled high temperature thermoplastic insulators withstand soldering heat. eets performance requirements of I-T vailable with 9 to 5 contacts. 3., 600 Vac, -55 to +50. Table I: ounting ardware S S R Thru-ole ackpost ex ead ackscrew ex ead ackscrew, xtended ow To Order Solder up onnector Sample art umber mldm2l -25 ps b Series ow rofile etal Shell icro- Solder up ontact Termination ow rofile etal Shell icro- with Yellow hromate over admium Shell inish (ood corrosion protection, not RoS compliant) 2 ow rofile etal Shell icro- with lectroless ickel Shell inish (RoS compliant, preferred for space vehicles and protected environments) ontact ayout 9, 5, 2, 25, 3, 37, 5, 5-2 (See Table II) Size #26 Solder up ontacts (Standard) S, - in SS, - Socket ontact Type Size #24 Solder up ontacts TS, - Socket S, - in ounting ardware,,,, S, S,,,, R, (See Table I) Slot ead ackscrew Slot ead ackscrew, xtended 32 ow rofile etal Shell icro- with lack Zinc ickel Shell inish (RoS compliant, preferred for tactical equipment where a black finish and good corrosion protection are required) 33 ow rofile etal Shell icro- with ickel- luorocarbon Shell inish (RoS compliant, excellent corrosion protection, grey color) ex ead ackscrew on- Removable Slot ead ackscrew on- Removable xtended loat ount or ront anel ounting loat ount or Rear anel ounting Threaded Insert IX icro- ouble and Triple Row 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

114 icro- ouble and Triple Row ow rofile etal Shell icro- Solder up ontact Termination Table II: imensions 2Xø.096/.088 (2.44/2.23).00 X..094±.005 (2.39±0.3) SOR U TRITIO.200 X. (IR ROW O 3 ROW 5) ayout In. ax. ax. ax. ax. ax. ax. ax. In. ±.003 ± 0.08 In. In. In. In. ±.003 ± 0.08 In. In. In S S S S S S S S IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

115 ow profile connectors have reduced flange height compared to standard W icro- connectors. These.050" pitch icro- connectors are supplied with stranded mil spec hookup wire. ontacts are crimped to wire and potted with epoxy. in contacts are gold-plated high performance Twistin type and are recessed into insulator to prevent damage. Socket contacts are gold plated, machined copper alloy. achined aluminum shell. lass-filled high temperature thermoplastic insulators / standard wire, or 22959/33 lightweight, high strength space grade wire. eets performance requirements of I-T vailable with 9 to 5 contacts. 3., 600 Vac, -55 to +50. Table I: ounting ardware S S R Thru-ole ow rofile etal Shell icro- Insulated Wire Termination ackpost #2-56 ex ead ackscrew #2-56 ex ead ackscrew, xtended #2-56 ow To Order Insulated Wire onnector Sample art umber mldm2l -3 p -6 k 5-8 m Series ontact ayout ow rofile etal Shell icro- With Yellow hromate Over admium inish 32 ow rofile etal Shell icro- With lack Zinc ickel Shell inish ontact Type - in S - Socket 9, 5, 2, 25, 3, 37, 5, 5-2 (See Table II) Wire age (W) 4 - # # # #30 ( wire type only) Wire Type Wire color ode Wire ength ounting ardware Standard Wire xtruded T per 22759/, Silver-lated onductors Slot ead ackscrew # ow rofile etal Shell icro- With lectroless ickel Shell inish 33 ow rofile etal Shell icro- With ickel-luorocarbon Shell inish Space rade Wire igh Strength, ightweight, rosslinked odified T per 22759/33, Silver-lated onductors - White 5 - olor-oded per I-ST olor Repeat (Wires are solid color per I-ST-68 color code system.) Wire ength In Inches xample: 8 = 8 inches;,,, S, S,,,,,, R Slot ead ackscrew, xtended #2-56 ex ead ackscrew on- Removable #2-56 Slot ead ackscrew on- Removable xtended #2-56 loat ount or ront anel ounting loat ount or Rear anel ounting Threaded Insert #2-56 IX icro- ouble and Triple Row 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

116 icro- ouble and Triple Row ow rofile etal Shell icro- Insulated Wire Termination Table II: imensions 2Xø.096/.088 (2.44/2.23) ength +.00/-0.0 ayout.094±.005 (2.39±0.3) In. ax. ax. ax. ax. ax. ax. ax. In. ±.003 ± 0.08 In. In. In. In. ±.003 STR WIR TRITIO ± 0.08 In. In. In S S S S S S S S IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

117 ow rofile etal Shell icro- Solid Wire Termination ow profile connectors have reduced flange height compared to standard W icro- connectors. These.050" pitch icro- connectors are supplied with solid copper wire. ontacts are crimped to wire and potted with epoxy. in contacts are gold-plated high performance Twistin type and are recessed into insulator to prevent damage. Socket contacts are gold plated, machined copper alloy. achined aluminum shell. lass-filled high temperature thermoplastic insulators. eets performance requirements of I- T vailable with 9 to 5 contacts. 3., 600 Vac, -55 to +50. Table I: ounting ardware S S R Thru-ole ackpost #2-56 ex ead ackscrew #2-56 ex ead ackscrew, xtended #2-56 ow To Order Solid Wire onnector Sample art umber mldm2l -3 s -4 c b Series ow rofile etal Shell icro- With Yellow hromate Over admium inish 32 ow rofile etal Shell icro- With lack Zinc ickel Shell inish ontact ayout 9, 5, 2, 25, 3, 37, 5, 5-2, ontact Type - in S - Socket Wire age (W) 4 - # # #26 Wire Type - Solid opper Wire inish 3 - Solder ipped (Sn60/b40) 4 - old-plated Wire ength Wire ength In Inches.25,.250,.500,.000,.500, ounting ardware,,, S, S,,,,,, R, Slot ead ackscrew # ow rofile etal Shell icro- With lectroless ickel Shell inish 33 ow rofile etal Shell icro- With ickel- luorocarbon Shell inish Slot ead ackscrew, xtended #2-56 ex ead ackscrew on- Removable #2-56 Slot ead ackscrew on- Removable xtended #2-56 loat ount or ront anel ounting loat ount or Rear anel ounting Threaded Insert #2-56 IX icro- ouble and Triple Row 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

118 icro- ouble and Triple Row ow rofile etal Shell icro- Solid Wire Termination ayout In..094±.005 (2.39±0.3) Table II: imensions ax. ax. ax. ax. ax. ax. ax. In. ±.003 ± Xø.096/.088 (2.44/2.23) In. In. In. In. ±.003 ± 0.08 T +0.2/-0.0 (±0.5) In. In. In S S S S S S S S SOI WIR TRITIO IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

119 ow rofile etal Shell icro- ack-to-ack ables actory terminated "back-to-back" jumper cables simplify ordering and reduce assembly labor. ontacts are crimped to wire and potted with epoxy. in contacts are goldplated high performance Twistin type and are recessed into insulator to prevent damage. Socket contacts are gold plated, machined copper alloy. luminum alloy shell. lass-filled high temperature thermoplastic insulator / standard wire, or 22959/33 lightweight, high strength space grade wire. eets performance requirements of I- T vailable with 9 to 5 contacts. 3., 600 V, -55 to +50. Table I: ounting ardware S S R Thru-ole ackpost #2-56 ex ead ackscrew #2-56 ex ead ackscrew, xtended #2-56 ow To Order ack-to-ack onnector Sample art umber mldm32l -37 gp -6 k -8 p Series ontact ayout ontact Type ow rofile etal Shell icro- With Yellow hromate Over admium inish 32 ow rofile etal Shell icro- With lack Zinc ickel Shell inish 9, 5, 2, 25, 3, 37, 5, 5-2 (See Table II) - in onnector oth nds S - Socket ontacts oth nds S - in onnector to Socket onnector Wire age (W) 4 - # # # #30 ( wire only) Wire Type Wire olor ode Wire ength (inches) Slot ead ackscrew # ow rofile etal Shell icro- With lectroless ickel Shell inish 33 ow rofile etal Shell icro- With ickel-luorocarbon Shell inish - Standard Wire xtruded T per 22759/, Silver-lated onductors - Space rade Wire igh Strength, ightweight, rosslinked odified T per 22759/33, Silver-lated onductors - White 5 - olor-oded per I-ST color repreat wires are solid color per I-ST-68 color code system. 8-8 inches (2" minimum for 2 rows, 3" minimunm for 3 rows). ounting ardware,,, S, S,,,,,, R (See Table I) Slot ead ackscrew, xtended #2-56 ex ead ackscrew on- Removable #2-56 Slot ead ackscrew on- Removable xtended #2-56 loat ount or ront anel ounting loat ount or Rear anel ounting Threaded Insert #2-56 IX icro- ouble and Triple Row 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

120 icro- ouble and Triple Row ow rofile etal Shell icro- ack-to-ack ables ayout In. Table II: imensions ax. ax. ax. ax. ax. ax. ax. ax. In. ±.003 ± 0.08 Wire ength +.00/-0.00 (+25.4/-0.0) In. In. In. In. In. In. In S S S S S S S S Xø.096/.088 (2.44/2.24) IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

121 ow rofile etal Shell icro- Right ngle Termination 2-25SRT-.0 ow profile connectors have reduced flange height compared to standard W icro- connectors. These thru-hole R style icro- connectors have goldplated tails on.00" centers. onnectors are backfilled with epoxy. in contacts are gold-plated high performance Twistin type and are recessed into insulator to prevent damage. Socket contacts are gold plated, machined copper alloy. old-plated tails. achined aluminum shell, stainless steel hardware. Optional #2-56 threaded inserts in board mounting holes. lass-filled thermoplastic insulators and tray withstand immersion in +260 solder for 0 seconds. eets performance requirements of I- T vailable with 9 to 5 contacts. 3., 600 Vac, -55 to +50. ow To Order Right ngle onnector Sample art umberv 2-2 S R T Series ontact ayout ow rofile etal Shell icro- With Yellow hromate Over admium inish 32 ow rofile etal Shell icro- With lack Zinc ickel Shell inish 9, 5, 2, 25, 3, 37, 5 (See Table II) ontact Type - in ontacts S - Socket ontacts Termination Type ardware Option Threaded Insert Option R - ondensed oard Right ngle 2 ow rofile etal Shell icro- With lectroless ickel Shell inish 33 ow rofile etal Shell icro- With ickel-luorocarbon Shell inish (Omit for one) ackposts for Rear anel ounting ackpost R.032 anel R2.047 anel R3.062 anel (See Table I) R4.093 anel R5.25 anel R6.25" anel Omit - or Thru-oles T - Threaded Inserts in oard ounting oles. #2-56 emale Thread. - Threaded Inserts in oard ounting oles. 2 etric Thread. Tail ength -.0, -.25, -.50, -.90, old-lated Terminal od ode TR ISRT Omit - These connectors are solder-dipped in 60/40 tin lead solder. To delete the solder dip and change to gold-plated terminal add code 53 Table I: ackpost Options o esignator R Thru R6 Thru-ole or use with lenair jackposts only. Order hardware separately. Install with threadlocking compound. Standard ackpost actory installed, not intended for removal. anel ackpost for Rear anel ounting Shipped loosely installed. Install with permanent threadlocking compound. IX icro- ouble and Triple Row 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

122 icro- ouble and Triple Row ow rofile etal Shell icro- Right ngle Termination ayout In. Table II: imensions ax. ax. ax. ax. ax. ax. In. ±.003 TI T ±.05 (0.38) Ø.094 (2.39) #2-56 U-2 or 2mm ± 0.08 In. In. In. In. In. ø.022/.08 (0.56/0.46) S S S S S S S In. ±.00 ± 0.25 In. IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

123 .020 (0.5).083 (2.).00 (2.54).08 (2.74).020 (0.5) 2X.00 (2.54).083 (2.).020 (0.5) 2X.00 (2.54).08 (2.74).050 (.27) 4X.00 (2.54) ow rofile etal Shell icro- Right ngle Termination (4.35) (8.6) (2.54) TY.050 (.27) TY (2.97) (6.35).250 (6.35).00 (2.54) TY.050 (.27) TY (30.86) R ayouts in onnectors.00 (2.54) TY.050 (.27) TY.250 (6.35).083 (2.).020 (0.5) 2X.00 (2.54).58 (4.0).020 (0.5) 3X.00 (2.54).83 (4.65).020 (0.5) 3X.00 (2.54).965 (24.5) I 25 I (28.32) (2.54) TY.050 (.27) TY I 3 I (2.54) TY.050 (.27) TY.300 (7.62) (32.3) I 37 I 5 I (2.54) TY.050 (.27) TY (6.35).250 (6.35).00 (2.54) TY.050 (.27) TY.250 (6.35) otes. atterns shown are for connector mounting side of board. 2. oard mounting holes are.094" (2.39) diameter. 3. tails are.022" (0.56) maximum diameter. IX icro- ouble and Triple Row 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

124 icro- ouble and Triple Row ow rofile etal Shell icro- Right ngle Termination IX.020 (0.5).083 (2.).00 (2.54).08 (2.74).020 (0.5) 2X.00 (2.54).083 (2.).020 (0.5) 2X.00 (2.54).08 (2.74).050 (.27) X.00 (2.54) (4.35) (2.54) TY.050 (.27) TY.250 (6.35).083 (2.).020 (0.5) 2X.00 (2.54) (24.5) Socket 25 Socket.75 (8.6) (6.35).00 (2.54) TY.050 (.27) TY.58 (4.0).020 (0.5) 3X.00 (2.54) (28.32) (2.54) TY.050 (.27) TY Socket 3 Socket (2.97) (2.54) TY.050 (.27) TY.250 (6.35).83 (4.65).020 (0.5) 3X.00 (2.54) (32.3) Socket 37 Socket.25 (30.86) R ayouts Socket onnectors Socket (2.54) TY.050 (.27) TY.300 (7.62) (2.54) TY.050 (.27) TY (2.54) TY.050 (.27) TY.250 (6.35).250 (6.35).250 (6.35) otes. atterns shown are for connector mounting side of board. 2. oard mounting holes are.094" (2.39) diameter. 3. tails are.022" (0.56) maximum diameter. 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

125 W ow rofile lastic Shell icro- Solder up Termination These.050" pitch all-plastic solder cup icro- connectors accept #26 to #30 gage wire with standard contacts and up to size #24 wire with large bore contacts. ontacts are factory-installed and potted with epoxy. in contacts are gold-plated high performance Twistin type and are recessed into insulator to prevent damage. Socket contacts are gold plated, machined copper alloy. lassfilled high temperature thermoplastic insulators withstand soldering heat. eets performance requirements of I-T-8353, lass. vailable with 9 to 5 contacts. 3., 600 Vac, -55 to +50. Table I: ounting ardware S S Thru-ole ackpost #2-56 ow To Order Solder up onnector Sample art umber mwdl -25 ss b Series ontact ayout ontact Type W - ow rofile lastic Shell icro- 9, 5, 2, 25, 3, 37, 5 (See Table II) Size #26 Solder up ontacts (Standard) S - in SS - Socket ounting ardware,,,, S, S (See Table I) ex ead ackscrew #2-56 ex ead ackscrew, xtended #2-56 Size #24 Solder up ontacts S - in TS - Socket Slot ead ackscrew #2-56 Slot ead ackscrew, xtended #2-56 IX icro- ouble and Triple Row 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

126 icro- ouble and Triple Row W ow rofile lastic Shell icro- Solder up Termination ayout In. Table II: imensions ax. ax. ax. ax. ax. ax. ax. ax. In. ±.003 ± /.088 (2.43/2.23) I..00/.088 (2.54/2.24).0 (2.79) X SOT OTOR In. In. In. In. In. In. In S S S S S S S erformance Specifications urrent Rating 3 WV 600 V Sea level Insulation Resistance 5000 egohms inimum ontact Resistance 8 illiohms aximum Operating Temperature -55. to +50. Shock, Vibration 50 g., 20g. ating orce (0 Ounces) X (# of ontacts) onnector ody in ontact Socket ontact ardware ncapsulant.200 (5.08) X IR ROW O 3 ROW 5 I OTOR aterials and inishes iquid rystal olymer (), lass-filled eryllium opper, old over ickel lating opper lloy, old Over ickel lating 300 Series Stainless Steel poxy IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

127 W ow rofile lastic Shell icro- Insulated Wire Termination Table I: ounting ardware S S Thru-ole ackpost #2-56 W connectors are supplied with stranded mil spec hookup wire. ontacts are crimped to wire and potted with epoxy. in contacts are gold-plated high performance Twistin type and are recessed into insulator to prevent damage. Socket contacts are gold plated, machined copper alloy. lass-filled high temperature thermoplastic connector body / standard wire, or 22959/33 lightweight, high strength space grade wire. eets performance requirements of I-T-8353, lass. vailable with 9 to 5 contacts. 3., 600 Vac, -55 to +50. ow To Order Stranded Wire onnector Sample art umber mwdl -37 p -6 k 5-8 m Series ontact ayout ontact Type W - ow rofile lastic Shell icro- 9, 5, 2, 25, 3, 37, 5 (See Table II) - in ontacts S - Socket ontacts Wire age (W) 4 - # # # #30 (See Table II) Wire Type Wire olor ode Wire ength (Inches) - Standard Wire xtruded T per 22759/, Silver-lated onductors (#30 W not available) - Space rade Wire igh Strength, ightweight, rosslinked odified T per 22759/33, Silver-lated onductors - White 5 - olor-oded per I-ST olor Repeat Wires are solid color per I-ST-68 color code system. 8 = 8 inches ounting ardware,,, S, S, (See Table I) ex ead ackscrew #2-56 ex ead ackscrew, xtended #2-56 Slot ead ackscrew #2-56 Slot ead ackscrew, xtended #2-56 IX icro- ouble and Triple Row 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

128 icro- ouble and Triple Row W ow rofile lastic Shell icro- Insulated Wire Termination ayout In. Table II: imensions ax. ax. ax. ax. ax. ax. ax. ax. In. ±.003 ± 0.08 In. In. In. In. In. In. In S S S S S S S urrent Rating WV Insulation Resistance ontact Resistance erformance Specifications V Sea level 5000 egohms inimum 8 illiohms aximum Operating Temperature -55. to +50. Shock, Vibration 50 g., 20g. ating orce.096/.088 (2.43/2.23) I..00/.088 (2.54/2.24) (0 Ounces) X (# of ontacts) SOT OTOR I OTOR onnector ody in ontact Socket ontact ardware ncapsulant aterials and inishes iquid rystal olymer (), lass-illed eryllium opper, old Over ickel lating opper lloy, old Over ickel lating 300 Series Stainless Steel poxy T +.0/-0.0 (+25.4/-0.0) T +.0/-0.0 (+25.4/-0.0) IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

129 W ow rofile lastic Shell icro- Solid Wire Termination W connectors are supplied with solid copper wire. ontacts are crimped to wire and potted with epoxy. in contacts are gold-plated high performance Twistin type and are recessed into insulator to prevent damage. Socket contacts are gold plated, machined copper alloy. lass-filled high temperature thermoplastic connector body. hoose gold-plated wire or pre-tinned with Sn60/b40 tin-lead solder. eets performance requirements of I- T-8353, lass. vailable with 9 to 5 contacts. 3., 600 Vac, -55 to +50. Table I: ounting ardware S S Thru-ole ackpost #2-56 ow To Order Solid Wire onnector Sample art umber mwdl -3 s -4 c b Series W - ow rofile lastic Shell icro- ontact ayout 9, 5, 2, 25, 3, 37, 5, ontact Type - in ontacts S - Socket ontacts Wire age (W) 4 - # # #26 Wire Type Wire inish Wire ength (Inches) ounting ardware - Solid opper 3 - Solder ipped (Sn60/b40) 4 - old-plated.25,.250,.500,.000,.500, Wire ength In Inches,,, S, S,, See Table I ex ead ackscrew #2-56 ex ead ackscrew, xtended #2-56 Slot ead ackscrew #2-56 Slot ead ackscrew, xtended #2-56 IX icro- ouble and Triple Row 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

130 icro- ouble and Triple Row W ow rofile lastic Shell icro- Solid Wire Termination ayout In. Table II: imensions ax. ax. ax. ax. ax. ax. ax. ax. In. ±.003 ± 0.08 In. In. In. In. In. In. In S S S S S S S urrent Rating WV Insulation Resistance ontact Resistance erformance Specifications V Sea level 5000 egohms inimum 8 illiohms aximum Operating Temperature -55. to +50. Shock, Vibration 50 g., 20g. ating orce.096/.088 (2.43/2.23) I..00/.088 (2.54/2.24) (0 Ounces) X (# of ontacts) SOT OTOR I OTOR onnector ody in ontact Socket ontact ardware ncapsulant aterials and inishes iquid rystal olymer (), lass-filled eryllium opper, old over ickel lating opper lloy, old Over ickel lating 300 Series Stainless Steel poxy T + 0.2/-0.0 (+5.08/-0.0) T + 0.2/-0.0 (+5.08/-0.0) IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

131 W ow rofile lastic Shell icro- ack-to-ack ables actory terminated "back-to-back" jumper cables simplify ordering and reduce assembly labor. ontacts are crimped to wire and potted with epoxy. in contacts are gold-plated high performance Twistin type and are recessed into insulator to prevent damage. Socket contacts are gold plated, machined copper alloy. lassfilled high temperature thermoplastic connector body / standard wire, or 22959/33 lightweight, high strength space grade wire. eets performance requirements of I-T-8353, lass. vailable with 9 to 5 contacts. 3., 600 Vac, -55 to +50. Table I: ounting ardware S S Thru-ole ackpost #2-56 ex ead ackscrew #2-56 ow To Order Sample art umber mwdl -37 gp -6 k -8 p Series ontact ayout onnector Type W - ow rofile lastic Shell icro- 9, 5, 2, 25, 3, 37, 5 (See Table II) - in onnector oth nds S - Socket ontacts oth nds S - in onnector to Socket onnector Wire age (W) 4 - # # # #30 ( Wire Only) Wire Type Wire olor ode Wire ength (Inches) ounting ardware,,, S, S, (See Table I) Standard Wire xtruded T per 22759/, Silver-lated onductors (#30 W not available) - Space rade Wire igh Strength, ightweight, rosslinked odified T per 22759/33 Silver-lated onductors - White 5 - olor-oded per I-ST-68. Wires -0 are solid color, and up are striped 7-0 olor Repeat, wires are solid color per I-ST-68color code system. 8-8 inches (2" minimum for 2 rows, 3" minimunm for 3 rows). ex ead ackscrew, xtended #2-56 Slot ead ackscrew #2-56 Slot ead ackscrew, xtended #2-56 IX icro- ouble and Triple Row 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

132 icro- ouble and Triple Row W ow rofile lastic Shell icro- ack-to-ack ables Wire ength +.00/-0.00 (+25.4/-0.0) Table II: imensions 2Xø.096/.088 (2.44/2.24) IX ayout In. ax. ax. ax. ax. ax. ax. ax. ax. In. ±.003 ± 0.08 In. In. In. In. In. In. In S S S S S S S urrent Rating WV Insulation Resistance ontact Resistance erformance Specifications V Sea level 5000 egohms inimum 8 illiohms aximum Operating Temperature -55. to +50. Shock, Vibration 50 g., 20g. ating orce (0 Ounces) X (# of ontacts) onnector ody in ontact Socket ontact ardware ncapsulant aterials and inishes iquid rystal olymer (), lass-filled eryllium opper, old over ickel lating opper lloy, old Over ickel lating 300 Series Stainless Steel poxy 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

133 ow profile W connectors have reduced flange height compared to standard W icro- connectors. These thru-hole R style icro- connectors have solder dipped leads, gold-plated leads optional on.00" centers. onnectors are backfilled with epoxy. in contacts are gold-plated high performance Twistin type and are recessed into insulator to prevent damage. Socket contacts are gold plated, machined copper alloy. Stainless steel hardware. Optional #2-56 threaded inserts in board mounting holes. lass-filled thermoplastic insulators and tray withstand immersion in +260 solder for 0 seconds. eets performance requirements of I-T-8353, lass. vailable with 9 to 5 contacts. 3., 600 Vac, -55 to +50. ow To Order Right ngle onnector Sample art umber W -2 S R T.0-53 Series W - ow rofile lastic Shell icro- ontact ayout 9, 5, 2, 25, 3, 37, 5 ontact Type Termination Type ardware Option Threaded Insert Option - in ontacts S - Socket ontacts R - ondensed oard Right ngle Tail ength.0,.25,.50,.90,.250 old-lated Terminal od ode TR ISRT W ow rofile lastic Shell icro- Right ngle Termination (Omit for one) ackpost ackposts for Rear anel ounting R.032 anel R2.047 anel R3.062 anel (See Table I) R4.093 anel R5.25 anel R6.25" anel Omit - or Thru-oles T - Threaded Inserts in oard ounting oles. #2-56 emale Thread. - Threaded Inserts in oard ounting oles. 2 etric Thread. Omit - These connectors are solder-dipped in 60/40 tin lead solder. To delete the solder dip and change to gold-plated terminal add code 53 Table I: ackpost Options o esignator R Thru R5 Thru-ole or use with lenair jackposts only. Order hardware separately. Install with threadlocking compound. Standard ackpost actory installed, not intended for removal. anel ackpost for Rear anel ounting Shipped loosely installed. Install with permanent threadlocking compound. IX icro- ouble and Triple Row 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

134 icro- ouble and Triple Row W ow rofile lastic Shell icro- Right ngle Termination IX ayout In. Table I: imensions ax. ax. ax. ax. ax. In. ±.003 TI T ±.05 (0.38) Ø.094 (2.39) #2-56 U-2 or 2mm ± 0.08 ø.022/.08 (0.56/0.46) In. In. In. In. In S S S S S S S erformance Specifications urrent Rating 3 WV 600 V Sea level Insulation Resistance 5000 egohms inimum ontact Resistance 8 illiohms aximum Operating Temperature -55. to +50. Shock, Vibration 50 g., 20g. ating orce (0 Ounces) X (# of ontacts) onnector ody in ontact Socket ontact ardware ncapsulant In. ±.00 ± 0.25 In. aterials and inishes iquid rystal olymer (), lass-filled eryllium opper, old over ickel lating opper lloy, old Over ickel lating 300 Series Stainless Steel poxy 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

135 .020 (0.5).083 (2.).00 (2.54).08 (2.74).020 (0.5) 2X.00 (2.54).083 (2.).020 (0.5) 2X.00 (2.54).083 (2.).020 (0.5) 2X.00 (2.54) W ow rofile lastic Shell icro- Right ngle Termination (4.35) (24.5).00 (2.54) TY.050 (.27) TY (8.6) (2.97) W R ayouts in onnectors (.27) TY.250 (6.35).250 (6.35).00 (2.54) TY.050 (.27) TY (2.54) TY.050 (.27) TY.00 (2.54) TY.250 (6.35).250 (6.35).58 (4.0).020 (0.5) 3X.00 (2.54).83 (4.65).020 (0.5) 3X.00 (2.54) (28.32) I 3 I (32.3) I 37 I.08 (2.74).050 (.27) X.00 (2.54) (2.54) TY.050 (.27) TY (30.86) I 5 I 25 I (6.35).00 (2.54) TY.050 (.27) TY (2.54) TY.050 (.27) TY.250 (6.35).300 (7.62) otes. atterns shown are for connector mounting side of board. 2. oard mounting holes are.094" (2.39) diameter. 3. tails are.022" (0.56) maximum diameter. IX icro- ouble and Triple Row 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

136 icro- ouble and Triple Row W ow rofile lastic Shell icro- Right ngle Termination IX.020 (0.5).083 (2.).00 (2.54).08 (2.74).020 (0.5) 2X.00 (2.54).083 (2.).020 (0.5) 2X.00 (2.54).083 (2.).020 (0.5) 2X.00 (2.54) (4.35) Socket 3 Socket.75 (8.6) Socket 37 Socket 2 Socket 5 Socket.965 (24.5) Socket.250 (6.35).00 (2.54) TY.050 (.27) TY (2.97) 7 W R ayouts Socket onnectors (2.54) TY.050 (.27) TY (.27) TY 2.00 (2.54) TY.050 (.27) TY.250 (6.35).00 (2.54) TY.250 (6.35).250 (6.35).58 (4.0).020 (0.5) 3X.00 (2.54).83 (4.65).020 (0.5) 3X.00 (2.54).08 (2.74).050 (.27) X.00 (2.54) (28.32) (2.54) TY.050 (.27) TY.250 (6.35) otes. atterns shown are for connector mounting side of board. 2. oard mounting holes are.094" (2.39) diameter. 3. tails are.022" (0.56) maximum diameter (32.3) (30.86) (2.54) TY.050 (.27) TY (2.54) TY.050 (.27) TY.250 (6.35).300 (7.62) 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

137 Setion ombo icro- for igh ower pplications ew and now available: Right angle combo power and signal icro- connectors. onsult factory for ordering information. ombo Solder up age -4 ombo re-wired age -7 ombo Vertical ount age -0 ombo 90 mount age -3 roduct Selection uide lenair s ombo icro-'s combine the size and weight advantages of a icro - connector with the added ability to handle higher power needs. These connectors feature combinations of.079 inch (2mm) power contacts and Twistin signal contacts. 3 mp urrent Rating vailable in three styles: solder cup, pre-wired pigtails or printed circuit board, these icro- connectors handle up to #6 W wire. Introducing The Right ngle ombo icro- our newest addition adds right angle mount board mount capability to our combo high power and signal offerings. onsult the factory for ordering information. ombo icro- Solder up onnectors onremovable solder cup #6 power contacts for termination to #6 W or smaller wire. icro pins accept #26 W or smaller wire. old plated contacts are backfilled with rigid epoxy. ombo icro- re-wired igtails rimp contacts are terminated to insulated Teflon wire. onnectors are backpotted with epoxy, providing strain relief and environmental protection. ombo icro- rinted ircuit oard Ideal for flexible or rigid circuits, these vertical mount connectors feature high temperature materials to withstand soldering heat. full range of hardware options is available. ombo icro- rinted ircuit oard Ideal for flexible or rigid circuits, these 90 mount plug and receptacle connectors feature high temperature materials to withstand soldering heat. full range of hardware options is available. IX icro- ombo 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

138 icro- ombo ombo icro- for igh ower pplications Shell Size and ontact rrangements - ating ace View U RT 2 2 OWR OTTS 2 3 OWR OTTS OWR OTTS 6 IRO OTTS OWR OTTS OWR OTTS 8 IRO OTTS 0 4 OWR OTTS 22 IRO OTTS IX OWR OTTS 6 IRO OTTS 4 OWR OTTS 20 IRO OTTS 2 6 OWR OTTS lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

139 Ø 0.25(3.8) ombo icro- for igh ower pplications anel ount utouts (+ 0.05) ( 0.00) Shell Size Recommended anel utout for Shell Sizes,,, and In. ±.003 imensions ± 0.08 In R Ø0.26 ±0.002 (Ø3.20 ±0.05) R0.063(.60) (4 os) R 0.00 (2.54) R (0.05) (0.00) Recommended anel utout for Shell Size.25±0.003 (30.86±0.08).060 ±0.002 (26.92 ±0.05) 0.36 (8.02) 0.300±0.005 (7.62±0.3) ull Radius (+ 0.0) ( 0.00) IX icro- ombo 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

140 icro- ombo ombo icro- for igh ower pplications Solder up ow To Order ombo Solder up icro- Sample art umber 2 - S Series Shell inish luminum Shell - admium 2 - ickel 4 - lack nodize 5 - old 6 - hem ilm Stainless Steel Shell 3 - assivated 2, 2, 3, Shell Size and Insert rrangement 2, 3, 0, 03,, 2 See Insert rrangements on age -2 Shell Style - lug R - Receptacle Termination Type S - Solder up ardware,,,, S, S,,,, R, Table I: ounting ardware 3 mp urrent Rating ombo icro-'s combine the size and weight advantages of a icro - connector with the added ability to handle higher power needs. Solder up ontacts old plated beryllium copper power contacts accommodate up to #6 W stranded wire. Signal contacts accept up to #26 W wire. il Spec erformance lenair combo icro- connectors comply with the requirements of I- T-8353 and feature excellent resistance to high temperatures, shock and vibration. 03 lug onnector with Twistin signal contacts and socket 2mm power contacts 03R Receptacle onnector with socket Twistin signal contacts and male 2mm power contacts S S R IX Thru-ole ackpost #2-56 ex ead ackscrew #2-56 ex ead ackscrew, xtended #2-56 Slot ead ackscrew #2-56 Slot ead ackscrew, xtended #2-56 ex ead ackscrew on- Removable #2-56 Slot ead ackscrew on- Removable xtended loat ount or ront anel ounting loat ount or Rear anel ounting Threaded Insert # lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

141 urrent Rating (0.35) 8.92 ayout ielectric Withstanding Voltage Insulation Resistance ontact Resistance ow evel ontact Resistance agnetic ermeability (2.36) ax. ombo icro- for igh ower pplications Solder up erformance Specifications 3 Signal ontacts 3.079" (2mm) ower ontacts 600 V Sea evel 50 V 70,000 eet 5000 egohms inimum 8 illiohms aximum Signal ontacts 32 illiohms aximum Signal ontacts 2 µ aximum Operating Temperature -55. to +50. Shock 50 g. Vibration 20 g. ating orce (0 Ounces) X (# of ontacts) ower ontacts (28 oz) x (# of contacts) Table II: imensions for Shell Size onnectors.44 (36.45) ax.25 (30.86) ax. ax ax ±0.0 In. In. In R R R onnector Shell Insulator Interfacial Seal in ontact, Twistin Socket ontact in ontact, 2 ower Skt. ontact. 2 ower ardware Terminals ncapsulant Section (7.87) ax.0 (2.79) ax. 0.2 (5.08) ax aterials and inishes luminum lloy 606. See Ordering Info for lating Options. iquid rystal olymer () luorosilicone Rubber, lue opper lloy with 50 icroinches old over ickel lating opper lloy with 50 icroinches old Over ickel lating rass With 50 icroinches old Over ickel lating eryllium opper With 50 icroinches old Over ickel lating 300 Series Stainless Steel old-lated opper lloy, Solder ipped poxy IX icro- ombo 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

142 icro- ombo ombo icro- for igh ower pplications Solder up (2.36) Table III: imensions for Shell Size,, and onnectors ax 0. (2.8) max (7.0) ax ax 0.35 (8.00) ax ax ax ax ayout In. ax. ax. ax. ax. ax. In. ±.003 ± 0.08 In. In. In. In R R R R R R IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

143 ombo icro- for igh ower pplications re-wired 3 mp urrent Rating ombo icro-'s combine the size and weight advantages of a icro - connector with the added ability to handle higher power needs. re-wired nd otted with poxy old plated power contacts accommodate up to #6 W stranded wire. Signal contacts accept up to #24 W wire. il Spec erformance lenair combo icro- connectors comply with the requirements of I-T-8353 and feature excellent resistance to high temperatures, shock and vibration. Table I: ounting ardware S S R Thru-ole ackpost ex ead ackscrew ow To Order re-wired icro- ower onnectors Sample art umber 2-2 T Series Shell inish Stainless Steel Shell - admium 4 - lack nodize 6 - hem ilm ex ead ackscrew, xtended 2 - ickel 5 - old Shell Size and 2, 2, 3, 2, 3, 2 Insert ayout Shell Style = lug R = Receptacle able ntry Style Wire age for #24 ontacts (W) Wire age for #6 ontacts (W) Wire Type Wire olor Wire ength (mm) ardware T - Top ntry Slot ead ackscrew Stainless Steel Shell 3 assivated 4 - # # # #30 Omit for 2 and 2 layouts containing power contacts only. 6, 8, / 600 Vrms Teflon (T) / Vrms odified ross-inked Tefzel (T) Slot ead ackscrew, xtended Vrms Type 6878/4 (T) - White 2 - Yellow 5 - olor-oded per I-ST olor Repeat Wires are solid color per I-ST-68 color code system. ote: #6 and #8 wire is always white. Wire colors apply to signal wire only Wire length In millimeters, rounded up to the nearest 0,,,, S, S,,,, R, ex ead ackscrew on- Removable Slot ead ackscrew on- Removable xtended - 3-T Type T 6878/6 250 Vrms ote: power contacts supplied white only loat ount or ront anel ounting loat ount or Rear anel ounting Threaded Insert IX icro- ombo 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

144 icro- ombo ombo icro- for igh ower pplications re-wired Table II: imensions for Shell Size onnectors.040 (26.42) ax (9.60) Wire ength 0.35 (8.92) ax..44 (36.45) ax.25 (30.86) ax. R-WIR OTOR ISIOS OR S SIZ IX urrent Rating ayout ielectric Withstanding Voltage Insulation Resistance ontact Resistance erformance Specifications 3 Signal ontacts 3.079" (2mm) ower ontacts 600 V Sea evel 50 V 70,000 eet 5000 egohms inimum 8 illiohms aximum Signal ontacts 32 illiohms aximum Signal ontacts 2 µ aximum ow evel ontact Resistance agnetic ermeability Operating Temperature -55. to +50. Shock 50 g. Vibration 20 g. ating orce (0 ounces) x (number of contacts) ower ontacts (28 ounces) x (number of contacts) ax onnector Shell Insulator Interfacial Seal in ontact, Twistin Socket ontact, in ontact, 2 ower Skt. ontact. 2 ower ardware Terminals ncapsulant ax In. In R R R aterials and inishes luminum lloy 606. See Ordering Info for lating Options. iquid rystal olymer () luorosilicone Rubber, lue opper lloy with 50 icroinches old over ickel lating opper lloy with 50 icroinches old Over ickel lating rass With 50 icroinches old Over ickel lating eryllium opper With 50 icroinches old Over ickel lating 300 Series Stainless Steel old-lated opper lloy, Solder ipped poxy Resin 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

145 ayout In. ombo icro- for igh ower pplications re-wired 0.35 (8.00) ax Table III: imensions for Shell Size,, and ax. ax. ax. ax. ax. ax. ax (2.36) In. ±.003 ax ax ± 0.08 ax ax ax (9.60) otting In. In. In. In. In R R R R R R Wire ength 0.270(6.86) ax IX icro- ombo 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

146 icro- ombo ombo icro- for igh ower pplications Vertical ount rinted ircuit oard IX 3 mp urrent Rating ombo icro-'s combine the size and weight advantages of a icro - connector with the added ability to handle higher power needs. rinted ircuit oard Terminals Ideal for flexible circuits or rigid boards, these gold plated tail contacts are sealed with epoxy encapsulant and are non-removable. Table I: ackpost Options and R U, SU, S OR Thru-ole ackpost it.062 (.6) R.96 (5.0) ow To Order Vertical ount ombo icro- onnectors Sample art umber 2 2 R S -.09 Series Shell inish Shell Size and Insert rrangement Shell Style Termination Style luminum Shell - admium 2 - ickel 4 - lack nodize 5 - old 6 - hem ilm 2, 2, 3, 3, 03 lug S - ompact Vertical ount R Receptacle Stainless Steel Shell 3 assivated ardware o ackpost, o Threaded Insert xtended ackpost for.062" (.6), o Threaded Insert R xtended ackpost for.96" (5.0), o Threaded Insert U 2-56 U Threaded Insert, o ackposts etric 2 Threaded Insert, o ackposts SU Short ackpost, 2-56 U Threaded Insert Rear anel ackposts Supplied either with U style 2-56 U or style 2 Threaded Inserts TU or T 0.094" (2.4) anel VU or V 0.062" (.6) anel WU or W 0.047" (.2) anel XU or X 0.03" (0.8) anel XU or X 0.023" (0.6) anel S Short ackpost, 2 etric Threaded Insert Tail ength.09,.50,.72,.90,.250 ength in Inches ±.05 (0.38) Threaded Inserts ackpost With Threaded Insert TU,VU,WU,XU,YU T,V,W,X,Y ackpost for Rear anel ounting 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

147 ayout In. ombo icro- for igh ower pplications Vertical ount rinted ircuit oard Table II: imensions or Shell Size,, and ax. ax. ax. ax. ax. ax. In. ± /.088 (2.44/2.24) I. 2 S. ± 0.08 (See Table I).079 (2.0) ±.002 (0.05).020 (0.5) ±.002 (0.05) Tail ength.72 (4.37) ±.05 (0.38) In. In. In. In. In R R R R R IX icro- ombo 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

148 icro- ombo ower and ombo icro- for igh ower pplications Vertical ount rinted ircuit oard IX ower and ombo icro- ayouts atterns shown are for connector mounting side of board. lated thru-holes to accept.08 (2.06) maximum diameter power pins marked -, and.022(.56) maximum diameter signal pins marked 8. lug onnectors Receptacle onnectors (2.49).098 (2.49).08 (2.74).26 (5.49).75 (8.6).096 (2.44) I R.08 (2.74).26 (5.49).26 (5.49).26 (5.49).26 (5.49) 2 S.5 (28.32 ).096 (2.44) I R (2.44) I R.096 (2.44) I R 5.08 (2.74).965 (24.5) (5.49) 2 S.50 (3.8).096 (2.44) I R.965 (24.5).08 (2.74) (3.8).3 (3.8) (7.00).276 (7.00).25 (30.86).08 (2.74) 2 S 6.50 (3.8).242 (6.4).50 (3.8).098 (2.49).098 (2.49).08 (2.74).75 (8.6).096 (2.44) I R.26 (5.49).08 (2.74) 3.26 (5.49) 4.26 (5.49).26 (5.49).26 (5.49) 2 S.08 (2.74).5 (28.32 ).096 (2.44) I R (2.44) I R (5.49) 2 S (24.5).096 (2.44) I R.965 (24.5).096 (2.44) I R.50 (3.8) (30.86).08 (2.74) (7.00).276 (7.00).3 (3.8).3 (3.8) (2.74) 2 S (3.8).242 (6.4).50 (3.8) 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

149 U, ombo icro- for igh ower pplications 90 ount rinted ircuit oard 3 mp urrent Rating ombo icro-'s combine the size and weight advantages of a icro - connector with the added ability to handle higher power needs. rinted ircuit oard Terminals Ideal for flexible circuits or rigid boards, these gold plated tail contacts are sealed with epoxy encapsulant and are non-removable. ow To Order 90 ount ombo icro- onnectors Sample art umber 2 2 R RT TU.09 Series Shell inish Shell Size and Insert rrangement Shell Style Termination Style ardware Thickness ower ontacts (in) luminum Shell - admium 2 - ickel 4 - lack nodize 5 - old 6 - hem ilm 2, 2, 3, 2, 3, 2 lug R Receptacle Stainless Steel Shell 3 assivated RT 90 with ncapsulating Tray ote all combo (power/signal connectors are supplied as RT Style) U 2-56 U ounting Threads, o ackposts 2 etric ounting Threads, o ackposts SU ex ackpost, 2-56 U ounting Threads S ex ackpost, 2 ounting Threads Table I: ackpost Options SU, S Rear anel ount Supplied either with U style 2-56 U ount or style metric mount, 2 Threaded Inserts TU or T 0.094" (2.4) anel VU or V 0.063" (.6) anel WU or W 0.047" (.2) anel XU or X 0.03" (0.8) anel YU or Y 0.025" (0.65) anel ZU or Z 0.079" (2.0) anel RU or R 0.059" (.5) anel.09(2.77),.50(3.8),.90(4.83),.250(6.35) ength in Inches(mm) ±.05 (0.38) TU,VU,WU,XU,YU,ZU,RU T,V,W,X,Y,Z,R Threaded Inserts ackpost With Threaded Insert ackpost for Rear anel ounting with ounting Thread IX icro- ombo 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

150 icro- ombo ombo icro- for igh ower pplications 90 ount rinted ircuit oard lug Shown : (6.5) ax. Receptacle: (8.80) ax (8.80) ax..89 (4.80) ayout Thickness.409 (0.40) ax. In. Table II: imensions or Shell Size,, and ax. ax..029 (.750).256 (6.50) R (2.50) 0.84 (4.68) In. ±.003 ± (5.00).8 (3.00) Section View Showing ounting oles R & R & 3R & R & 3R R In. IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

151 ower icro- for igh ower pplications 90 ount rinted ircuit oard ower icro- 90 ayouts atterns shown are for connector mounting side of board. lated thru-holes to accept.08(2.06) maximum diameter power pins marked - Ø.096 (2.44) ount ole (2 pos).75 (8.6) Ø.096 (2.44) ount ole (2 pos).75 (8.6) 0.266(6.76) 0.965(24.50) Ref Only 0.965(24.50) 2 Ø.096 (2.44) ount oles (2 os) Ø0.096 (2.44) ount oles (2 os).5 (28.32).65 (4.02) Ø0.096(2.44) ount oles (2 os) lug onnectors.08 (2.75) 0.08 (2.75) 0.08 (2.75) (5.50) itch (6.76) Ref Only (6.50).27 (5.50).249 (6.33) Ref Only (6.50) 6.50 (0.256) 0.27 (5.50) itch (5.9) Ref Only Ø.096 (2.44) ount oles (2 os) Ø0.096 (2.44) ount oles (2 os).5 (28.32).65 (4.02) Receptacle onnectors.08 (2.75) 0.08 (2.75) (5.50) itch (6.76) Ref Only (6.50).27 (5.50).249 (6.33) Ref Only 0.256(6.50) 0.256(6.50) Ø0.096(2.44) ount oles (2 os) 0.27(5.50) 0.27(5.50) 0.08 (2.75) (6.50) 0.266(6.76) Ref Only 6.50 (0.256) 0.27 (5.50) itch (5.9) Ref Only IX icro- ombo 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

152 icro- ombo ombo icro- for igh ower pplications 90 ount rinted ircuit oard ombo icro- 90 ayouts atterns shown are for connector mounting side of board. lated thru-holes to accept.08(2.06) maximum diameter power pins marked - and.022 maximum diameter signal pins marked 0. Ø.096 (2.44) ount ole (2 pos) 0.08(2.75) Ø.096 (2.44) ount ole (2 pos) 0.08(2.75) 0.27(5.50) lug onnectors (24.5) (2.50) 0.256(6.50) Receptacle onnectors (28.32) 0.098(2.50) 0.256(6.50) Ø.096 (2.44) ount ole (2 pos) 0.08(2.75) Ø.096 (2.44) ount ole (2 pos) 0.08(2.75) 0.27(5.50) (24.5) (28.32) (2.50) 0.256(6.50) 0.256(6.50) 0.098(2.50) IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

153 and i filter connectors IRO icro- iltered connectors or improved signal quality Our icro- filter connectors serve double duty by also eliminating unwanted high frequency noise. These connectors feature a precision milled aluminum shell and thermally conductive epoxy potting to prevent damage to filters during soldering. onfiguration options include vertical and 90 printed circuit board orientations as well as time and cost saving solutions such as prewired pigtail filter connectors and in-line filter adapters. lenair icro- connectors are in stock and available for immediate shipment. lenair, Inc. 2 ir Way lendale, [email protected]

154 Section icro- I-T-8353 Type ilter onnectors icro- ilter age -7 roduct Selection uide Solder up ilter onnector age -9 Vertical icro- ilter onnector age -4 Insulated Wire ilter onnector age -6 In-ine ilter dapter age -8 Right ngle icro- ilter onnector age age S Receptacle ssembly Rear anel ount Solder up ilter onnector Rear anel ount Vertical ilter onnector age S Receptacle ssembly Rear anel ount Insulated Wire ilter onnector age -28 Rear anel ount ondensed oard Right ngle ilter onnector age age S Receptacle ssembly dge oard icro- ilter onnector ombo icro- ilter connector 249-ITS-IRO age -35 I Troubleshooter it for icro- onnectors IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

155 icro- ilter icro- ilter onnectors eneral Information bout icro- filter connectors lenair ilter icro- connectors are low-pass filters, transmitting and low frequency signals while attenuating unwanted high frequency noise. These connectors are available with filter elements or i filters. The filter substrates are constructed with a ceramic planar capacitor array. lenair ilter icro-'s meet the demanding performance requirements of I-T-8353, except for a reduction in the dielectric withstanding voltage rating to 250 volts (higher voltages available on request). The Twistin contact system assures superior performance in the most demanding applications. ilter Single capacitor with low self inductance. This configuration is generally used to attenuate high frequency signals. The simple design allows high-frequency I to discharge to ground via the surrounding electromagnetic field. filters occupy the least amount of space and offer lower cost compared to other filter types. i ilter ual capacitors with a ferrite inductor positioned between them. The i filter provides excellent high-frequency performance due to its sharper rolloff. ilter icro- ilter ttenuation and apacitance Values ilter lass apacitance o oad Insertion oss (d inimum) p z 0 z 00 z z 9,000 28, ,000 22, ,000 6, ,000 6, ,650 2, icro- i ilter ttenuation and apacitance Values IX i ilter ilter lass apacitance o oad Insertion oss (d inimum) p z 0 z 00 z z 38,000 56, ,000 45, ,000 33, ,000 2, ,300 5, , lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

156 icro- ilter onnectors eneral Information icro- ilter icro- ilter onnector ontact rrangements (ace View in onnector) ontacts 5 ontacts 2 ontacts 25 ontacts 3 ontacts 37 ontacts erformance Specifications urrent Rating 3 ielectric Withstanding Voltage 250 V Working Voltage 00 V Insulation Resistance 5000 egohms inimum ontact Resistance 8 milliohms aximum ow evel ontact Resistance 32 milliohms aximum agnetic ermeability 2 µ aximum Operating Temperature -55 to +25 Shock 50 g. Vibration 20 g. ating orce (0 oz) x (# of ontacts) apacitance and ttenuation (See Table on receding age) onnector Shell Insulator Seals in ontact Socket ontact ardware Terminals apacitors Inductors I round Spring ncapsulant.050 (.27) OTT SI (.27) * onsult factory for filtered icro- connectors in other arrangements aterials and inishes luminum lloy 606 or Stainless Steel, 300 Series, assivated. See Ordering Info for luminum lating Options. iquid rystal olymer () luorosilicone Rubber, lue eryllium opper With 50 microinches old over ickel lating opper lloy With 50 microinches old Over ickel lating 300 Series Stainless Steel old-lated opper lloy, Solder ipped lanar eramic rray errite.0433 (.0) eryllium opper, old lated Thermally onductive poxy IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

157 IX icro- ilter icro- ilter onnectors Recommended anel utouts.00(0.25) X RIUS 4 S.062 (.6) RIUS 4 S U RIUS TY. 2 S. ront anel ounting U RIUS TY. 2 S. Rear anel ounting ayout In. ±.003 etal Shell wdm onnectors ± 0.08 In. ±.002 ± 0.05 In. ±.002 ± In. ±.002 ± 0.05 In. ±.005 ± 0.3 ote: or front panel mounting, filtered connectors require a larger cut-out than standard I-T-8353 connectors. In. ±.002 ± lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

158 I-ST-68 olor ode hart icro- ilter I O. I-ST-68 UR ase olor il-std-68 olor ode hart or icro- onnectors irst Stripe Second Stripe I O. I-ST-68 O. ase olor irst Stripe Second Stripe WT R VIO 2 R WT R RY 3 2 R WT U VIO 4 3 OR WT U RY 5 4 Y WT VIO RY 6 5 R WT R R 7 6 U WT R OR 8 7 VIO WT R Y 9 8 RY WT R R 0 9 WT WT R U 90 WT WT R VIO 2 9 WT R WT R RY 3 92 WT R WT R OR 4 93 WT OR WT R Y 5 94 WT Y WT R R 6 95 WT R WT R U 7 96 WT U WT R VIO 8 97 WT VIO WT R RY 9 98 WT RY WT OR Y WT R WT OR R WT R WT OR U WT OR WT OR VIO WT Y WT OR RY WT R WT Y R WT U WT Y U WT VIO WT Y VIO WT RY WT Y RY WT R R WT R U WT R OR WT R VIO WT R Y WT R RY 3 95 WT R R WT U VIO WT R U WT U RY WT R VIO WT VIO RY WT R RY WT R R OR WT R OR WT R R Y WT R Y WT R R R WT R R WT R R U WT R U WT R R VIO WT R VIO WT R R RY WT R RY WT R OR Y WT OR Y WT R OR R WT OR R WT R OR U WT OR U WT R OR VIO WT OR VIO WT R OR RY WT OR RY WT R Y R WT Y R WT R Y U WT Y U WT R Y VIO WT Y VIO WT R Y RY WT Y RY WT R R U WT R U WT R R VIO Third Stripe IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

159 icro- ilter icro- ilter onnectors Special roducts filter connectors for space flight admium and silver plating are prohibited in space. Specify electroless nickel or gold for connector finish onnector aterial and inish Options for Space pplications Some types of metals are prohibited for space flight. admium, zinc, chemically coated cadmium or zinc, or silver shall not be used as a connector or contact finish (S - IST-002: Instructions for arts Selection, Screening, ualification, and erating). S recommends electroless nickel or gold plating on connector shells and gold plating for contacts. Standard filter connectors require thermal vacuum bakeout to meet outgassing requirements S screened filter connectors meet outgassing requirements Outgassing Some flight equipment requires low-outgassing components in order to prevent degradation to optics and other sensitive instruments. The space industry has adopted a standardized test procedure, ST 595, to evaluate outgassing properties. In order to be considered outgassing compatible, a material must exhibit a total mass loss (T) of less than.0% and a collected volatile condensable material (V) of less than 0.%. Some of the materials used in filter connectors, like fluorosilicone interfacial seals, must go through special processing to meet T and V requirements. er -IST-002, filter connectors subjected to +25 as part of voltage conditioning do not require additional processing to meet the outgassing requirements. If processing is required, lenair offers a 24 hour thermal vacuum outgassing at 25 for filter connectors. ission critical connectors for space flight should undergo rigorous 00% final inspection. odification codes are available to invoke special screening. S Screening S recommends that connectors for space flight be specially screened. -IST-002 contains three levels of screening: evel for highest reliability with the lowest level of risk, evel 2 for high reliability with low to moderate risk, and evel 3 for standard reliability. S Screening evels and odification odes asa Screening evel Screening Screening & X-Ray Inspection evel : ighest Reliability od 429 od 429R evel 2: igh Reliability od 429 od 429S evel 3: Standard Reliability od 429 od 429T X-Ray Inspection To reduce risk even further for mission critical applications, x-ray inspection on a real-time x-ray system is available. Samples subject to x-ray inspection per od code 844 will be screened for foreign object debris (O) and if applicable, broken strands. minimum of two views for each sample will be stored and are available upon request. dd the O codes listed in the table below to the end of a part number to invoke special test or processing requirements. IX Real-Time X-Ray achine Thermal Vacuum Outgassing od 86 X-Ray Inspection od lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

160 icro- ilter onnectors Solder up icro- ilter Table I: icro- ounting ardware S S Thru-ole Order ardware Separately ackpost Removable Includes ut and Washer ackscrew ex ead Removable -ring ackscrew ex ead Removable -ring xtended lenair iltered Solder up icro-'s provide I solutions in a miniaturized 8353 type connector. These connectors feature ceramic capacitor planar arrays and ferrite inductors. Solder cups accept #26 thru #30 W wire, or specify oversize contacts for #24 gage wire. hoose i or ilter rrays in eight filter classes and six layouts. lenair filtered icro- connectors comply with applicable I-T-8353 requirements and are 00% intermateable with standard connectors. hoose 9 to 37 ontacts, with standard cadmium or nickel plating on the connector housing or choose optional finishes such as gold or chem film. ow To Order ilter icro- onnectors with Solder ups Sample art umber p p b b Series Shell inish luminum Shell - admium 2 - ickel 4 - lack nodize 5 - old 6 - hem ilm Stainless Steel Shell 3 - assivated ontact ayout 9, 5, 2, 25, 3, 37 (See Table III) ontact Type Solder up ontacts for #24 W or Smaller Wire - in S - Socket ilter Type - ilter - i ilter (See Table II) ilter lass,,,,,,, (See Table II) ardware,,,, S, S,,, (See Table I) ackscrew Slot ead Removable -ring ackscrew Slot ead Removable -ring xtended ackscrew ex ead on- Removable ackscrew Slot ead on- Removable xtended Threaded Insert IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

161 IX icro- ilter icro- ilter onnectors Solder up Table II: icro- ilter lasses and erformance ilter lass apacitance (p) ilter i ilter Table III: imensions.25 (3.8) X..096/.088 (2.43/2.23) I. I ITR.800 (20.32) X I ITR ITR (5.24) (20.32) X X. ITR.500 (2.70) X..287 (7.3) X..093 ±.005 (2.36 ± 0.3) ax ax. ax. ax. ax. ayout In. In. In. In. In. In. In. ±.003 ± 0.08 ±.003 ± S S S S S S lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

162 icro- ilter onnectors Vertical ount icro- ilter Vertical ount rinted ircuit oard icro - ilter onnectors. These vertical mount connectors are ideal for flexible circuit or motherboard applications. ey eatures include gold plated Twistin contacts, machined aluminum shells, and either i or filter elements. These environmentally sealed connectors are designed to meet the requirements of I-T Integral oard Standoffs and re-tinned Tails These connectors are solder dipped (63/37 Snb) and feature a full complement of mounting hardware options. ow To Order icro- ilter Vertical ount onnectors Sample art umber p c d p Series Shell inish ontact ayout luminum Shell - admium 2 - ickel 4 - lack nodize 5 - old 6 - hem ilm 9, 5, 2, 25, 3, 37 (See Table II) ontact Type - in S - Socket ilter Type - ilter - i ilter (See Table I) ilter lass,,,,,,, (See Table I) Stainless Steel Shell 3 - assivated Tail ength -.0 Inches (2.79) Inches (6.35) ength in Inches ±.05 (0.38) ardware Option ardware Options - o ackpost, o Threaded Insert - xtended ackpost for.062 (.6), o Threaded Insert R - xtended ackpost for.96 (5.0), o Threaded Insert U - Threaded Insert Only, o ackposts U - Short ackpost and Threaded Insert Rear anel ackposts with Threaded Inserts R6U (3.2) anel R5U (2.4) anel R4U (.6) anel R3U (.2) anel R2U (0.8) anel ackscrew Options - ex ead ackscrews S - Slot ead ackscrews Table I: icro- ilter lasses and erformance ilter lass apacitance (p) ilter i ilter IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

163 IX icro- ilter icro- ilter onnectors Vertical ount Table II: imensions Ø.08 ±.002 (0.46 ± 0.05).096/.088 (2.43/2.23) I. I ITR.930 (23.62) X. ITR.530 (3.46) X..025 (0.64) TI T ±.05 (± 0.38) ayout In. ax. ax. ax. ax. In. ±.003 ± 0.08 In. In. In. In. ± S S S S S S ± lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

164 Vertical ount icro- ilter onnectors ardware Options icro- ilter Style onnector Supplied Without ardware Thru-ole, o ardware.60 (4.) I. (9-5 IS).225 (5.7) I. (00 I) U Style ackpost with Threaded Insert OR xtended ackpost Style for.062" R Style for.96" icro- ilter Vertical ardware Options ITR 9-5 OTTS.096/.088 (2.44/2.24) 00 OTTS.50/.45 (3.8/3.68) Style ex ead ackscrew with -Ring 9-5 OTTS O U-2 00 OTTS O U-2 U Style onnector Supplied With Threaded Inserts.60 (4.) I. (9-5 IS).225 (5.7) I. (00 I) RU Style Rear anel ackpost with Threaded Insert S Style Slot ead ackscrew with -Ring IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

165 icro- ilter Vertical ount icro- ilter onnectors ayouts icro- ilter Vertical ayouts in onnector Shown Tail iameter.08 ±.002 (0.46 ± 0.05) ontact numbers shown are for pin connectors..050 (.27) TY.025 (0.64) TY (.27) TY.565 (4.35).096 (2.44) I TY.050 (.27) TY.025 (0.64) TY (.27) TY.75 (8.6) (2.44) I TY 9 OTTS 5 OTTS.050 (.27) TY.025 (0.64) TY.050 (.27) TY.025 (0.64) TY (.27) TY.865 (2.97).096 (2.44) I TY (.27) TY.965 (24.5).096 (2.44) I TY 2 OTTS 25 OTTS.050 (.27) TY.025 (0.64) TY (.27) TY.025 (0.64) TY (.27) TY.5 ( (2.44) I TY (.27) TY.265 (32.3).096 (2.44) I TY IX 3 OTTS 37 OTTS 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

166 Vertical ount icro- ilter onnectors ayouts icro- ilter (.27) TY.050 (.27) TY.025 (0.64) TY (.27) TY.565 (4.35).050 (.27) TY.025 (0.64) TY (.27) TY.865 (2.97).050 (.27) TY.025 (0.64) TY icro- ilter Vertical ayouts Socket onnector Shown Tail iameter.08 ±.002 (0.46 ± 0.05) ontact numbers shown are for socket connectors. 9 OTTS 5 OTTS 2 OTTS 25 OTTS.5 ( (2.44) I TY.096 (2.44) I TY.096 (2.44) I TY.050 (.27) TY.025 (0.64) TY (.27) TY.050 (.27) TY.025 (0.64) TY (.27) TY.75 (8.6).050 (.27) TY.025 (0.64) TY (.27) TY.965 (24.5).265 (32.3) (2.44) I TY (2.44) I TY.096 (2.44) I TY 3 OTTS 37 OTTS IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

167 icro- ilter re-wired icro- ilter onnectors Insulated Wire lenair iltered igtail icro-'s provide I solutions in a miniaturized 8353 icro- connector. These connectors feature ceramic capacitor planar arrays and ferrite inductors. Insulated wire is factory precision-crimped to Twistin contacts for superior reliability in the most demanding environments. hoose i or ilter rrays in eight filter classes and six layouts. lenair filtered icro- connectors comply with applicable I-T-8353 requirements and are 00% intermateable with standard connectors. hoose 9 to 37 ontacts, with standard cadmium or nickel plating on the connector housing or choose optional finishes such as gold or chem film. ow To Order ilter icro- onnectors with Insulated Wire igtails Sample art umber p p b 6 k -8 b Series Shell inish luminum Shell - admium 2 - ickel 4 - lack nodize 5 - old 6 - hem ilm Stainless Steel Shell 3 - assivated ontact ayout ontact Type ilter Type 9, 5, 2, 25, 3, 37 (See Table III) Solder up ontacts for #24 W or Smaller Wire - in S - Socket - ilter - i ilter (See Table II) ilter lass,,,,,,, (See Table I) Wire age (W) 4 - # #26 Wire Type / 600 Vrms Teflon (T) / Vrms odified ross-inked Tefzel (T) Wire olor Wire ength Inches - White 2 - Yellow 5 - olor-oded Stripes er I-ST-68(#24 and #26 gage only) 7 - Ten olor Repeat 8 wire ength In Inches. 8 Specifies 8 Inches. ardware,,,, S, S,,, (See Table I) Table I: icro- ounting ardware S S IX Thru-ole Order ardware Separately ackpost Removable Includes ut and Washer ackscrew ex ead Removable -ring ackscrew ex ead Removable -ring xtended ackscrew Slot ead Removable -ring ackscrew Slot ead Removable -ring xtended ackscrew ex ead on- Removable ackscrew Slot ead on- Removable xtended Threaded Insert 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

168 re-wired icro- ilter onnectors Insulated Wire icro- ilter Table II: icro- ilter lasses and erformance ilter lass apacitance (p) ilter i ilter ayout In..096/.088 (2.43/2.23) I. I ITR (24.3) (25.40) X. ITR (7.78) (6.5) X. Table III: imensions ax ax. ax. ax. ax. In. ±.003 ± ±.005 (2.36 ± 0.3).30 (7.87) X. In. In. In. In. ±.004 WIR T +.0/-0.0 (+25.4/-0.0) ± S S S S S S In. IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

169 IX icro- ilter icro- in-socket In-ine ilter dapters void ostly Redesign with icro- ilter dapters. Upgrade your existing cables and boxes to meet I requirements. These pin-socket adapters can be plugged into any standard 8353 connectors. Simply unplug your existing cable, install the filter adapter, and plug the cable into the adapter. In-ine ilter dapters feature gold plated Twistin contacts, machined aluminum shells, and either i or filter elements. These environmentally sealed adapters are designed to meet the requirements of I-T ow To Order icro- In-ine ilter dapters Sample art umber ps c d p Series luminum Shell - admium 2 - ickel Shell inish 4 - lack nodize 5 - old 6 - hem ilm ontact ayout 9, 5, 2, 25, 3, 37 (See Table II) ontact Type S - in/socket ilter Type - ilter - i ilter (See Table I) ilter lass,,,,,,, (See Table I) Stainless Steel Shell 3 - assivated ardware - o ardware - ombination ackscrew and ackpost icro- In-ine ilter dapter ontact rrangements ating ace View of in onnector. Socket connectors have reversed cavity numbers. Table I: icro- ilter lasses and erformance ilter lass apacitance (p) ilter i ilter lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

170 icro- in-socket In-ine ilter dapters icro- ilter ayout Table II: imensions SOT I In. ax. ax. ax. ax. ax. ax. ax. In. ±.003 ± 0.08 IR In. In. In. In. ±.004 ± 0.0 In. In. ±.004 ± 0.0 In. In. 9S S S S S S IX #2-56 U TS 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

171 icro- ilter icro- ilter onnectors Right ngle Right ngle oard ount iltered icro-'s. These connectors feature low-pass I filtering in a right angle header for termination. ey eatures include gold plated Twistin contacts, machined aluminum shells, and either i or filter elements. These environmentally sealed connectors are designed to meet the requirements of I-T " x.00" oard Spacing - These connectors are similar to R style icro-'s and share the same board footprint, allowing retrofit to existing boards. ow To Order icro- iltered Right ngle onnectors Sample art umber s p e U Series luminum Shell - admium 2 - ickel Shell inish 4 - lack nodize 5 - old 6 - hem ilm ontact ayout 9, 5, 2, 25, 3, 37 (See Table II) ontact Type - in S - Socket ilter Type - ilter - i ilter (See Table I) ilter lass,,,,,,, (See Table I) ardware ardware Options - o ackpost, o Threaded Insert - ackpost, o Threaded Insert U - Threaded Insert Only, o ackposts U - ackpost and Threaded Insert Stainless Steel Shell 3 - assivated Tail ength ength in Inches ±.05(0.38) Rear anel ackposts with Threaded Inserts R6U (3.2) anel R5U (2.4) anel R4U (.6) anel R3U (.2) anel R2U (0.8) anel icro- ackpost options /U /U R2U Thru R6U anel X UT OXY I Thru-ole: or use with lenair jackposts only. Order hardware separately. Install w/ threadlocking compound. Standard ackpost: actory installed, not intended for removal. ackpost for Rear anel ounting: Shipped loosely installed. Install w/ permanent threadlocking compound. IX Table I: icro- ilter lasses and erformance ilter lass apacitance (p) ilter i ilter lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

172 icro- ilter onnectors Right ngle icro- ilter ayout Table II: imensions ilter i ilter ax. ax. ax. ax. ax. In. #2-56 U-2 TRS I ITR.300 (33.02) X ITR.960 (24.38) X In. ±.003 ± 0.08 OIURTIO OR 3-37 OTTS In. In. In. In. ± S S S S S S ± 0.0 I ITR (30.6) (28.96) X. ITR (2.97) (2.34) X X. In. OIURTIO OR 9-25 OTTS 2X OUTI OS.096 I. ±.003 (2.44 ± 0.08) OR OTIO 2-26 U 2 TR ISRTS In. ±.00 ±0.25 In. ±.00 ±0.25 In. ±.00 TI Tail T length± ±.05 (0.38) (0.38) ±0.25 In. ±.00 ±0.25 IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

173 icro- ilter icro- ilter onnectors Right ngle icro- ilter Right ngle ayouts in onnector Tail iameter.08 ±.002 (0.46 ± 0.05) ontact numbers shown are for pin connectors. atterns shown are for connector mounting side of board..020 (0.5).083 (2.).020 (0.5).083 (2.).00 (2.54).00 (2.54) OTOR OTOR.00 (2.54)TY.00 (2.54)TY (.27)TY (4.35) (4.35) (.27)TY.565 (4.35) OTOR OTOR.00 (2.54).08 (2.74).00 (2.54).08 (2.74) (2.54) (2.54) (.27)TY 9 0 (.27)TY (8.6) (.27)TY (8.6).75 (8.6) (0.5) (0.5).020 (0.5) 9 OTTS 5 OTTS (2.54) (2.54) (2.) (2.) (2.54).083 (2.) (2.54) (2.54).00 (2.54) OTOR OTOR (.27)TY 3 5 (.27)TY (.27)TY (2.97) (2.97).865 (2.97) (0.5) (0.5).020 (0.5) (2.54) (2.54) (2.) (2.) (2.54).083 (2.) (2.54) (2.54) (2.54) (.27)TY (.27)TY.050 (.27)TY.965 (24.5).965 (24.5) 2 OTTS 25 OTTS OTOR OTOR.020 (0.5).020 (0.5) (2.54) (2.54).00 (2.54) (2.54) (2.54).00 (2.54) OTOR OTOR.58 (4.0) OTOR.58 (4.0).58 (4.0) (.27)TY (.27)TY (.27)TY.5.5 (28.32) (28.32).5 (28.32) (2.54) (2.54).00.58(2.54).58 (4.0) (4.0) (4.0) (4.65) (2.54) (2.54) (0.5) (0.5).00 (2.54).020 (0.5) OTOR OTOR OTOR (.27)TY (.27)TY (.27)TY (32.3) (32.3).265 (32.3) (0.5) (0.5).020 (0.5) IX 3 OTTS 37 OTTS 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

174 icro- ilter onnectors Right ngle icro- ilter.00 (2.54).083 (2.).083 (2.).00 (2.54).020 (0.5) 0 5 OTOR.565 (4.35).00 (2.54)TY (.27)TY (.27)TY.865 (2.97) OTOR.00 (2.54) (2.54) (4.0) (.27)TY.5 (28.32) OTOR.00 (2.54) icro- ilter Right ngle ayouts Socket onnector Tail iameter.08 ±.002 (0.46 ± 0.05) ontact numbers shown are for socket connectors. atterns shown are for connector mounting side of board..020 (0.5).00 (2.54).58 (4.0).83 (4.65).00 (2.54).00 (2.54).083 (2.).00 (2.54).08 (2.74).00 (2.54) (.27)TY.75 (8.6) (.27)TY.265 (32.3) 9 OTOR 9 OTTS 5 OTTS.020 (0.5).050 (.27)TY.965 (24.5) OTOR.00 (2.54) OTTS 25 OTTS OTOR (0.5).020 (0.5).020 (0.5) 3 OTTS 37 OTTS IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

175 IX icro- ilter Rear anel ount icro- ilter onnectors Solder up lenair Rear anel ount Solder up ilter icro-'s provide I solutions in a miniaturized 8353 type connector. These connectors feature ceramic capacitor planar arrays and ferrite inductors. Solder cups accept #26 thru #30 W wire, or specify oversize contacts for #24 gage wire. hoose i or ilter rrays in eight filter classes and six layouts. lenair filtered icro- connectors comply with applicable I-T-8353 requirements and are 00% intermateable with standard connectors. hoose 9 to 37 ontacts, with standard cadmium or nickel plating on the connector housing or choose optional finishes such as gold or chem film. ow To Order Rear anel ount icro- ilter connectors with Solder ups Sample art umber s c f -r -n n Series Shell inish luminum Shell - admium 2 - ickel 5 - old 6 - hem ilm 33 - ickel/t ontact ayout 9, 5, 2, 25, 3, 37 (See Table II) ontact Type - in S - Socket ilter Type - ilter - i ilter ilter lass,,,,,,, (See Table I) ardware Option See ote Rear anel ount ardware Option R (.08) anel R (.2) anel R (.6) anel R (.2) anel R (.32) anel R (.20) anel lug I round Spring - round spring installed - o ground spring ( applies to all receptacle assemblies) See ote 2 O-Ring - onductive - on-onductive (itrile) Table I: icro- ilter lasses and erformance ilter lass apacitance (p) ilter i ilter lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

176 Rear anel ount icro- ilter onnectors Solder up icro- ilter.800 X I ITR.600 X ITR X Table II: imensions.25 X I ST X Shell Size ±.005 ±.003 ax ±.005 ax ±.003 ±.005 ax in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm S S S S S S otes. ounting holes fitted with 2x threaded insert,.5 min thread. (T ). 2. round spring not available on cadmium plated assemblies. 3. Interface dimensions per I-T lectrical performance: I.R.: 5000 egohms min at 00 V.W.V.: 200 V 5. ssembly to be identified with lenair s name, part number, date code, and pin identification. aterials / inishes Shell - luminum lloy/see hart Insulator - / ontacts - opper lloy/old lated round Spring - Stainless Steel/old lated Socket Interfacial Seal: lourosilicone IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

177 IX icro- ilter Rear anel ount icro- ilter onnectors Vertical ount Style lenair Rear anel ount icro -, ilter onnector These vertical mount connectors are ideal for flexible circuit or motherboard applications. ey eatures include gold plated Twistin contacts, machined aluminum shells, and either i or filter elements. These environmentally sealed connectors are designed to meet the requirements of I-T S Receptacle ssembly Integral oard Standoffs and re-tinned Tails These connectors are solder dipped (63/37 Snb) and feature a full complement of mounting hardware options. ow To Order Rear anel ount icro- iltered Vertical ount Sample art umber s c f r.0 n n Series Shell inish luminum Shell - admium 2 - ickel 5 - old 6 - hem ilm 33 - ickel/t ontact ayout 9, 5, 2, 25, 3, 37 (See Table II) ontact Type - lug/in S - Receptacle/Socket ilter Type - ilter - i ilter ilter lass,,,,,,, (See Table I) ardware Option See ote Rear anel ount ardware Option R (.08) anel R (.2) anel R (.6) anel R (.2) anel R (.32) anel R (.20) anel ead ength.080,.0,.25,.40,.50,.90,.250 lug I round Spring - round Spring Installed - o round Spring See ote 2 ( applies to all receptacle assemblies) O-Ring - onductive - on-onductive (itrile) Table I: icro- ilter lasses and erformance ilter lass apacitance (p) ilter i ilter lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

178 Rear anel ount icro- ilter onnectors Vertical ount Style icro- ilter Table II: imensions ().20 (5.33) Ref.930 ax i ilter.730 ax ilter ax in Skt ax 25 wg (Ø.08) Solder ipped Tail ength ±.05 2x Threaded Insert (See ote ) Shell Size ±.005 ±.003 ax ±.005 ax ±.003 ±.005 ax in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm S S S S S S otes. ounting holes fitted with 2x threaded insert,.5 min thread. (T ). 2. round spring not available on cadmium plated assemblies. 3. Interface dimensions per I-T lectrical performance: I.R.: 5000 egohms min at 00 V.W.V.: 200 V 5. ssembly to be identified with lenair s name, part number, date code, and pin identification. 6. See for layout aterials / inishes Shell - luminum lloy/see hart Insulator - / ontacts - opper lloy/old lated round Spring - Stainless Steel/old lated Socket Interfacial Seal: lourosilicone IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

179 IX 25S Receptacle ssembly icro- ilter Rear anel ount icro- ilter onnectors Insulated Wire lenair iltered Insulated Wire icro-'s provide I solutions in a miniaturized 8353 icro- connector. These connectors feature ceramic capacitor planar arrays and ferrite inductors. Insulated wire is factory precisioncrimped to Twistin contacts for superior reliability in the most demanding environments. hoose i or ilter rrays in eight filter classes and six layouts. lenair filtered icro- connectors comply with applicable I-T-8353 requirements and are 00% intermateable with standard connectors. hoose 9 to 37 ontacts, with standard cadmium or nickel plating on the connector housing or choose optional finishes such as gold or chem film. ow To Order Rear anel ount ilter onnectors with Insulated Wire Sample art umber s c f -6 k 7-8 r Series Shell inish luminum Shell - admium 2 - ickel 5 - old 6 - hem ilm 33 - ickel/t ontact ayout 9, 5, 2, 25, 3, 37 (See Table II) ontact Type - in S - Socket ilter Type - ilter - i ilter ilter lass,,,,,,, (See Table I) Wire auge Wire Type / /33-3- (6878/4) Wire olor/type - White 2 - Yellow 5 - ull olor 7-0 olor Repeat Wire ength 8-8 Inches ardware Option Rear anel ount ardware Option (See ote ) - o ardware R (.08) anel R (.2) anel R (.6) anel R (.2) anel R (.32) anel R (.20) anel lug I round Spring - round spring installed - o ground spring ( applies to all receptacle assemblies) (See ote 2) O-Ring - onductive - on-onductive (itrile) Table I: icro- ilter lasses and erformance ilter lass apacitance (p) ilter i ilter lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

180 Rear anel ount icro- ilter onnectors Insulated Wire icro- ilter Shell Size i =.750 ax =.500 ax I Table II: imensions ±.005 ±.003 ax ±.005 ax ±.003 ±.005 ax in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm S S S S S S otes. ounting holes fitted with 2x threaded insert,.5 min thread. (T ). 2. round spring not available on cadmium plated assemblies. 3. Interface dimensions per I-T lectrical performance: I.R.: 5000 egohms min at 00 V.W.V.: 200 V 5. ssembly to be identified with lenair s name, part number, date code, and pin identification. ax ST X Wire ength aterials / inishes Shell - luminum lloy/see hart Insulator - / ontacts - opper lloy/old lated round Spring - Stainless Steel/old lated Socket Interfacial Seal: lourosilicone IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

181 IX 25S Receptacle ssembly icro- ilter Rear anel ount icro- ilter onnectors ondensed oard Right ngle Type lenair iltered Right ngle icro-'s provide I solutions in a miniaturized 8353 icro- connector. These connectors feature ceramic capacitor planar arrays and ferrite inductors. hoose i or ilter rrays in eight filter classes and six layouts. lenair filtered icro- connectors comply with applicable I-T-8353 requirements and are 00% intermateable with standard connectors..00 x.00 oard Spacing - These connectors are similar to R style icro- s and share the same board footprint, allowing retrofit to existing boards. ow To Order icro- iltered Right ngle Sample art umber S -R T -.0 Series Shell inish luminum Shell - admium 2 - ickel 5 - old 6 - hem ilm 33 - ickel/t ontact ayout 9, 5, 2, 25, 3, 37 (See Table II) ontact Type - in S - Socket ilter Type - ilter - i ilter ilter lass,,,,,,, (See Table I) ardware Option Rear anel ount ardware Option (See ote ) R " (0.8) anel R " (.2) anel R " (.6) anel R " (2.4) anel R5-0.25" (3.2) anel R " (2.0) anel Insert T - Threaded insert in board mount hole - o threaded insert ead ength lug I round Spring - round spring installed - o ground spring ( applies to all receptacle assemblies) (See ote 2) O-Ring - onductive - on-onductive (itrile) Specific imensions per ilter Type ITR I ITR Shell Size X ±.00 ±.00 X ±.00 ±.00 in. in. in. in. in. in S S S S S S Rev. Oct lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

182 Rear anel ount icro- ilter onnectors ondensed oard Right ngle Type icro- ilter.094 (2.39) in ax Table II: imensional Table imensional Table Skt ax Table I: icro- ilter lasses and erformance ilter lass apacitance (p) 25 W (Ø.08) Solder ipped eads Shell X ±.003 X X X ±.004 X X X Size in. in. in. in. in. in. in. in. in S S S S S S ilter i ilter otes. ounting holes fitted with 2x threaded insert,.5 min thread. (T ). 2. round spring not available on cadmium plated assemblies. 3. Interface dimensions per I-T lectrical performance: I.R.: 5000 egohms min at 00 V.W.V.: 200 V 5. ssembly to be identified with lenair s name, part number, date code, and pin identification. 6. See for layout aterials / inishes: Shell - luminum lloy/see hart Insulator - / ontacts - opper lloy/old lated round Spring - Stainless Steel/old lated Socket Interfacial Seal: lourosilicone IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

183 IX icro- ilter dge oard icro- ilter onnector lenair dge oard icro- ilter onnectors provide I solutions in a miniaturized 8353 icro- connector. These connectors feature ceramic capacitor planar arrays and ferrite inductors. hoose i or ilter rrays in eight filter classes and six layouts. lenair filtered icro- connectors comply with applicable I-T-8353 requirements and are 00% intermateable with standard connectors. hoose 9 to 37 ontacts, with standard cadmium or nickel plating on the connector housing or choose optional finishes such as gold or chem film. ow To Order dge oard icro- ilter onnector Sample art umber p c a pn Series Shell inish luminum Shell - admium 2 - lectroless ickel 5 - old ontact ayout 9, 5, 2, 25, 3, 37 (See Table II) ontact Type - in S - Socket ilter Type - ilter - i ilter - o ilter ilter lass,,,,,,,, (See Table I) ardware Option (See ote ) - o ackpost, o Threaded Insert - ackpost, o Threaded Insert U - Threaded Insert Only, o ackpost (see Table III) Rear anel ount ackpost: R2U (0.6) anel R3U (.2) anel R4U (.6) anel R5U (2.4) anel R6U (3.2) anel ackscrew Option: - ex ead ackscrews S - Slot ead ackscrews (See Table IV) Table I: icro- ilter lasses and erformance ilter lass apacitance (p) ilter i ilter otes. tail configuration intended for use with.062 board thickness 2. lectrical erformance: Insulation Resistance: 5000 megohms in at 00 vdc ielectric Withstanding Voltage: 200 vdc aterials / inishes Shell - luminum lloy/see hart Insulator - / ontacts - opper lloy/old lated round Spring - Stainless Steel/old lated Socket Interfacial Seal: lourosilicone 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

184 dge oard icro- ilter onnector icro- ilter Table II: imensions Ø ax.292 ax See ote.070 in..050 ± ± Shell Size i ilter.800 ax ilter.600 ax.093 ±.00 ax ±.003 ax ±.004 ax in. mm in. mm in. mm in. mm in. mm in. mm S S S S S S IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

185 icro- ilter dge oard icro- ilter onnector icro- iltered dge oard onnector - lug.080 Typ. ad eight.026 Typ. ad Width lex Side Size lex Side.550 ad eight and Width Size lex Side Size lex Side lex Side Size lex Side Size 9 Size lex Side Size 5 lex Side lex Side Size 37 lex Side Size 5 Size lex Side Size lex Side IX.450 Size lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

186 dge oard icro- ilter onnector icro- ilter Typ. ad eight Typ. ad Width ad eight and Width Size 9S Size 5S Size 2S lex Side Size 9S lex Side lex Side Size 5S lex Side lex Side Size 2S lex Side icro- iltered dge oard onnector - Socket lex Side Size 25S lex Side.550 Size 25S Size 3S Size 37S lex Side Size 3S lex Side lex Side Size 37S lex Side IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

187 icro- ilter ombo icro- ilter onnector for ower pplications ombo icro- ilter onnectors combine the size and weight advantages of a icro- connector with the added ability to handle higher power needs. vailable in filter configurations, with solder cup contact termination, tails or pre-wired. 4x Solder up To ccept 24 W Stranded Wire 4X.00 ax.800 ax 4X.280 ax xø x Solder up To ccept 6 W Stranded Wire ax.38 ax ax 2 IX otes. lectrical erformance: Insulation Resistance: 5000 megohms in at 00 Vdc ielectric Withstand Voltage: 250 vdc apacitance: pins,,,, 3, 5, 9 and 2 to be n i filter (filter class ). ll remaining signal lines are fitted with dummy contacts with no termination. Signal current rating: 3 mps ax ower current rating: 7.5 mps ax 2. ssembly to be identified with lenair s name, part number and date code space permitting. aterials / inishes Shell - luminum lloy/see hart Insulator - / ontacts - opper lloy/old lated round Spring - Stainless Steel/old lated Socket Interfacial Seal: lourosilicone 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

188 249-ITS-IRO ITS I Troubleshooter icro- dition icro- ilter ITS is designed for fast troubleshooting of I issues. Reduce time and money spent at test labs debugging I problems with this portable kit. ightweight, high-strength anodized aluminum case comes supplied with low, medium, and high capacitance filters in size 9 through 37 position icro-s, and a hand-held R meter ow To Order ITS Sample art umber 249-ITS-IRO -2 Series lating 249-ITS-IRO 2 - luminum / lectroless ickel 5 - luminum / old I TroubleShooter icro- dition Item art umber* ty X-9S X-9S X-9S X-5S X-5S X-5S X-2S X-2S X-2S X-25S X-25S X-25S X-3S X-3S X-3S X-37S X-37S X-37S 9 738X S 20 U733 R TR TOO T62 VI SRW/ OST 8 * See for filter connector details IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

189 glass-to-metal seal I-T-8353 icro- hermetic connectors for high pressure/low leakage applications I-T-8353 type icro- hermetic connectors feature machined ovar shells and contacts with moisture resistant plating and paired with high performance contacts that make these connectors an excellent solution for high pressure and low leakage applications where vibration and shock are a concern. ermetic icro- onnectors are rated at x 0-7 cc/helium per second and are available in solder cup, tail and prewired pigtail termination options. hoose from 9 shell sizes to accomodate 9 to 00 sockets. lenair icro- hermetic connectors are in stock and available for immediate shipment. lenair, Inc. 2 ir Way lendale, [email protected]

190 Section icro- lass-sealed ermetic onnectors Solder ount ermetic Solder up ontacts age -6 Solder ount ermetic Tail ontacts age -6 ront anel ount ermetic age -9 ront anel ount ermetic age -8 R ermetic age -0 roduct Selection uide lenair s ermetic icro- onnectors feature fused glass insulators to provide an airtight seal. These connectors are 00% tested to meet a maximum leak rate of X 0-7 cc's per second of helium. atched ovar Seal The shells and contacts are machined from ovar, an iron-nickel-cobalt alloy which forms a chemical bond with the vitreous glass insulator. The contacts are goldplated and the shell is nickel-plated. hoose Solder up, Tails or re-wired in two styles: panel mount for soldering or o-ring mount. Solder ount ermetic These ovar alloy connectors are available in three styles: solder cup contacts, tail contacts or pre-wired and epoxysealed. Socket contacts are ovar alloy with gold plating. These connectors can be front- or rear-panel mounted. Installation requires soldering, brazing or welding to the bulkhead. elium leak rate is X 0-7 cc's per second. ront anel ount ermetic These ovar alloy connectors are available with 2 or 3 row solder cup or tail, and socket termination options ermetic for Rear-anel ounting void the expense of soldering with this o-ring version. lind tapped mounting holes and integral jackposts provide easy installation. Three termination options are available: solder cup, tails, or pre-wired to protect and insulate the solder joints. IX icro- ermetic 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

191 icro- ermetic icro- ermetic onnectors eneral Information IX ull Range of I-T-8353 Type icro- ermetic onnectors roduct pplications lenair I-T-8353 type icro- hermetic connectors are ideal for high-pressure/ low-leakage applications where size, weight and vibration resistance are a critical concern. Sophisticated electronics enclosures, vacuum chambers and cryogenic equipment all benefit from the airtight seal and moisture resistant plating found on lenair hermetic icro- connectors. Solder mount, and rear panel O-ring shell styles are available to meet a variety of design requirements. aterials ovar an iron nickel alloy is used in both the shells and contacts, and provides a chemical bond with the glass insulator for maximum hermeticity. Shells are then plated with nickel after the glass insulator is fired to enhance corrosion resistance. ontacts are plated with gold to ensure superior electrical conductivity. onnectors are offered with a minimum of 9 sockets, up to a maximum of 00 sockets in two, three and four row solder cup and pigtail configurations. luorosilicone rubber interfacial seals and O-rings ensure positive sealing with plug connectors and panels. old plated ovar socket contacts boast superior vibration resistance when used in conjunction with lenair s innovative Twistin contact system in the plug. Same-ay Inventory ecause lenair makes all its hermetic connectors in-house, including the machining of shells, molding of interfacial seals and firing of hermetic components, we can offer you outstanding availability on stock products and fast turnaround on special orders. atalog contents including part numbers, materials and dimensions are accurate to the best of our ability when we go to print. ven so, customers are advised to consult the factory for the latest specifications, particularly to confirm critical dimensions such as connector lengths, threads, and so on. orrected content is posted immediately to Solder ount and Rear anel Sealing Options 9 to 00 Sockets in 9 Shell Sizes Space rade Special Screening vailable x 0-7 cc/elium per Second eakage Rate Solder up, Tail and re- Wired igtail Termination Options achined ovar Shells and ontacts with oisture Resistant lating 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

192 icro- ermetic onnectors eneral Information icro- ermetic onnectors ermeticity is defined as "the state or condition of being airtight". Sophisticated military electronics enclosures can experience electrical failure from ingress of moisture. System engineers can design the enclosure to withstand exposure to moisture and condensation by using "moisture-hardened" components and conformal coatings, but often the most practical approach is to install hermetically sealed electrical I/O connectors. lass-to-metal seals provide assurance that, over the life of the enclosure, the accumulated amount of water vapor inside the box will not exceed the amount necessary to form condensation. Other applications for icro- hermetic connectors include vacuum chambers, cryogenics, and enclosures filled with inert gas. ovar lloy lenair's hermetic icro- shells and contacts are made from a special alloy called ovar, an iron-nickel-cobalt alloy consisting of 54% e, 29% i, and 7% o. This alloy is covered by S specification S-I-230. ovar has a relatively low coefficient of thermal expansion. atched lass-to-etal Seals atched seals rely on a chemical bond between the metal and the glass. ovar contacts and shells are first exposed to high temperatures in order to develop an oxide coating. Then, the borosilicate glass and metal components are assembled with fixtures and are fused in a firing furnace at 900. strong chemical bond is created between the metal and glass. Unlike compression seals which rely on different thermal coefficients of expansion between the glass and metal, a matched seal offers better resistance to stress from thermal extremes. ermetic Testing ll icro- hermetic connectors are 00% tested prior to shipment. helium leak test is performed to certify the hermetic seal. This test is conducted by inducing a T vacuum on one side of the connector. elium gas is released on the other side, and a mass spectrometer "counts" the number of helium molecules that penetrate the connector seal. elium leak testing takes advantage of the small size of a helium molecule compared to air or water vapor. elium is inert, rare in our atmosphere, and is easy to detect with a mass spectrometer. icro- ermetic lating Options Unlike regular connectors which are plated as components prior to assembly, hermetic connectors are electroplated after the parts are fired and cleaned of oxides. Typically the contacts are gold-plated and the connector shell is nickel-plated. onnector Installation ermetic connectors are typically soldered or welded into panels or bulkheads. aser welding is a good option if the connector is mounted onto a ovar or stainless steel panel. If the panel is aluminum alloy, then soldering is recommended. icro-'s with o-ring seals offer another alternative. O-rings, when installed properly, will provide a very low permeability seal. The seating surface must be free from scratches or imperfections. 32 finish is acceptable, but a 6 finish is preferred. The o-ring can be coated with a light coat of vacuum grease. e elium Tank ermetic onnector elium eak Tester IX icro- ermetic 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

193 icro- ermetic icro- ermetic onnectors eneral Information icro- ermetic onnector esign otes Why can't I get a hermetic icro- with pin contacts instead of sockets? The icro- Twistin contact cannot be made from the materials that are required for hermetic contacts. ermetic contacts are made from ferrous alloys such as ovar or lloy 52. These alloys do not have spring properties. The icro- Twistin contact is made from spring-temper beryllium copper. The icro- socket contact is a cylinder and does not provide any spring force, so icro- hermetic connectors are always receptacle connectors with socket contacts. What about high pressure? What is the maximum recommended pressure rating for a hermetic icro-? lenair hermetic icro-'s are built to safely withstand 000 SI of hydrostatic pressure in an open face (unmated) condition. icro- ontact rrangements (ace View Socket onnector) Socket 5 Socket 2 Socket 25 Socket Socket Socket (Standard 3 Row) Socket Socket Socket (Special 2 Row) IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

194 onnector Shell Insulator Interfacial Seal Socket ontact O-Ring ncapsulant icro- ermetic onnectors eneral Information aterials and inishes ovar lloy in ccordance With S S-I-230 lass, lated with lectrodeposited ickel In ccordance With S-S lass 2, Inches Thick. orosilicate lass luorosilicone Rubber, lue ovar lloy in ccordance With S S-I-230 lass, old lated In ccordance With ST 488 Type II, lass.27 (50 microinches minimum) over ickel Underplate in ccordance With S-S lass 2. luorosilicone Rubber, lue poxy erformance Specifications urrent Rating.5 ielectric Withstanding Voltage 50 V Working Voltage 00 V Insulation Resistance 5000 egohms inimum ontact Resistance illiohms aximum ermeticity aximum elium eak Rate X 0-7 cc's per Second at One tmosphere Operating Temperature -55. to +25. Shock 50 g. Vibration 20 g. Outgassing eets S Outgassing Requirements (mod code 429) ating orce (0 Ounces) X (# of ontacts) or additional performance requirements, please refer to I T 8353 onnector Weights or ermetic Solder ount aximum Weight In rams ayout Solder up ermetic eak Rate od odes esignator Required eak Rate 585 x 0-0 cc elium per second 585 x 0-9 cc elium per second 585 x 0-8 cc elium per second IX icro- ermetic 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

195 icro- ermetic Solder up or Tail and Insulated Wire icro- ermetic onnectors Solder, raze or Weld ount TS WIT ll Solder, raze, or Weld these and 704 ermetic icro- connectors. eaturing a matched glass-to-metal seal, these socket receptacles are designed for panel mounting. ovar Shells and ontacts comply with applicable I- T-8353 space requirements and are 00% intermateable with standard connectors. hoose 9 to 00 ontacts, with gold-plated contacts and nickel-plated shells. These connectors feature integral female jackposts. ow To Order ermetic icro- onnectors with Solder ups Sample art umber SS Series 8353 in onnectors ermetic icro- umber of ontacts 9, 5, 2, 25, 3, 37, 5-3, 5-2, 00 (Table I) Termination Type SS - Solder up, Socket S - Tail, Socket otes. Use of Threaded helical coil insert manufacturers option 2. lenair's hermetic socket connector mates with all standard I-T-8353 pin connectors (W series). 3. onnector may be back potted 4. Use threaded helical coil insert manufactures option. 5. onnector may be back potted 6. erformance: ermeticity x 0-6 atmosphere differential ielectric withstanding voltage: sea level 50 vac Insulation resistance: 5000 megohms min. 7. aterial/finish Shell: kovar alloy/electro-deposited nickel Socket contacts: ovar alloy/ gold plate Insulator: borosilicate glass Interfacial seal, o-ring: fluorosilicone/n.a. otting: epoxy ow To Order ermetic icro- onnectors with Insulated Wire Sample art umber S 6-8 Series ermetic icro- with Insulated Wire umber of ontacts 9, 5, 2, 25, 3, 37, 5-3, 5-2, 00 (Table I) ontact Type S - Socket ontacts, re Wired Wire age (W) #28 0 # / Wire Type 600 Vrms Teflon (T) (ot vailable in #30 W) Wire olor Wire ength Inches 22759/ Vrms odified ross-inked Tefzel (T) White 2 Yellow 5 olor-oded Stripes er I-ST-68 (#26 gage only) 7 Ten olor Repeat 8 Wire ength In Inches. 8 Specifies 8 Inches. IX otes. lenair hermetic socket connector mates with all standard I-T-8353 pin connectors (W series). 2. erformance: ermeticity x 0-6 atmosphere differential ielectric withstanding voltage: sea level 50 vac Insulation resistance: 5000 megohms min. 3. onnector may be back potted. 4. Use threaded helical coil insert manufactures option. 5. aterial/finish Shell: kovar alloy/electro-deposited nickel Socket contacts: ovar alloy/ gold plate Insulator: borosilicate glass Interfacial seal, o-ring: fluorosilicone/n.a. otting: epoxy 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

196 77-40 Solder up or Tail and Insulated Wire icro- ermetic onnectors Solder, raze or Weld ount ayout In. Table I: imensions ax. X. ax. ax. ax. In. ±.005 ± U Thread 9-69 OTTS #2-56 TRS 00 OTTS #4-40 TRS See ote (0.64) RIUS 4 S. In. ±.005 ± ±.005 (.93 ± 0.3) In. In..500 (2.7) X. In. ±.004 TI SOR U R-WIR ± 0.0 In..25 ±.05 (3.8 ± 0.38).02/.08 (0.53/0.46) TWO ROW.80 (4.57) X. TR & OUR ROW.260 (6.60) X. In. ±.004 ± 0.0 In. ±.004 9S S S S S S S 2 Row S 3 Row S T II SIZ I I I I SIZ in mm in mm in mm in mm 9.40/ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / 6.73 WIR T +.0 (2.54)/-0.0 OXY OTTI UT-OUT (R T II) R.035/.030 TY 4 ± 0.0 IX icro- ermetic 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

197 icro- ermetic I-T-8353 Type icro- ermetic onnectors Size 37 ront ount IX onductive lastomer O-Ring eliminates the cost of soldering the connector to a bulkhead. ovar Shells and ontacts comply with applicable I- T-8353 requirements and are 00% intermateable with standard connectors..500 (2.7) (.84).656 (42.06).265 (32.3) #2-56 ITR OST OUT.290 (7.37) otes. lenair's hermetic socket connector mates with all standard I-T pin connectors (W series). 2. erformance: hermeticity: x 0-8 atmosphere differential dielectric withstanding voltage: sea level 50 vac insulation resistance: 5000 megohms max. 3. ssembly to be identified with lenair's name, part number and date code space permitting. 4. ssembly to be identified with lenair's name, part number, and date code, space permitting (4.20).446 (36.73).265 (32.3).04 (28.04).98 (5.03).92 ( /.05 (.65/.30) TY 37 ITRI S.73 (4.39).65 (4.9) ow To Order Tail onnectors Series icro- ermetic Socket Shell, Size 37, ront ount Sample art umber R.00 TY (6.48) #2-56 OUTI OS.379 (9.63).092 (2.34).20 (5.33) Ø.033/.032 (0.84/0.8) Ø.022/.08 (0.56/0.46) aterial/finish 5. Shell: ovar alloy/electro-deposited nickel Socket contacts: ovar alloy/ gold plate Interfacial seal: fluorosilicone elastomer 6. O-ring: conductive elastomer, chomerics ounting screws: 8-8 res, #2-56 x.87 utton-head socket head cap screw supplied with connector (2 each) 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

198 I-T-8353 Type icro- ermetic onnectors Shell Size 9-2 front ount R.00 TY 4 luorosilicone O-Ring eliminates the cost of soldering the connector to a bulkhead. ovar Shells and ontacts comply with applicable I- T-8353 requirements and are 00% intermateable with standard connectors. ow To Order ermetic icro- onnectors with Solder up or Tail Sample art umber Series umber of ontacts icro- ermetic -9, -5, -2 (Table II) O-Ring aterial - - Viton itrile -3 - ourosilicone -4 - Silicone -5 - onductive.98 (5.03).92 (4.88).065/.05 (.65/.30) ITRI S R.030 TY.250 ± #2-56 U-2 TY RO UT-OUT.0 (2.79) X (2.7) Table II: ontact imensions ayout #2-56 ITR OST OUT 2Xø.093 ±.003 (2.36 ± 0.08) OUTI O otes. onductive o-ring material - chomerics 25 or equivalent. 2. lenair's hermetic socket connector mates with all standard I- T-8353 pin connectors (mwdm series). 3. erformance: ermeticity: x 0-8 atmosphere differential ielectric withstanding voltage: sea level 50 vac Insulation resistance: 5000 megohms max. ssembly to be identified with lenair's name, part number and date code space permitting. aterial/finish Shell: ovar alloy/electro-deposited nickel socket coantacts: ovar alloy/ gold plate interfacial Seal: fluorosilicone elastomer 20 IX icro- ermetic 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

199 icro- ermetic Solder up or Tail and Insulated Wire icro- ermetic onnectors Rear anel ount luorosilicone O-Ring eliminates the cost of soldering the connector to a bulkhead. ovar Shells and ontacts comply with applicable I- T-8353 requirements and are 00% intermateable with standard connectors. Solder up, Tail or re-wired and ully otted Suitable for #26 gage wire or smaller, solder cup versions feature gold-plated contacts. hoose tails for attachment to flex circuits or rigid boards. Solder cup versions are also available pre-wired and potted. ow To Order ermetic icro- onnectors with Solder up or Tail Sample art umber Ss u Series TS WIT ll ermetic icro in onnectors umber of ontacts 9, 5, 2, 25, 3, 37, 5-2, 5-3, 00 (Table I) ontact Type SS - Solder up, Socket S - Tail, Socket ounting Threads U #4-40 U 3 etric ow To Order ermetic icro- onnectors with Insulated Wire Sample art umber s 6 k -8 Series ermetic icro- umber of ontacts 9, 5, 2, 25, 3, 37, 5-2, 5-3, 00 (Table I) ontact Type S - Socket ontacts, re-wired Wire age (W) 6 #26 8 #28 0 # / Wire Type 600 Vrms Teflon (T) (ot vailable in #30 W) 22759/ Vrms odified ross-inked Tefzel (T) Wire olor White, 2 Yellow, 5 olor-oded Stripes er I-ST-68 (#26 gage only) 7 Ten olor Repeat Wire ength Inches 8 Wire ength In Inches. 8 Specifies 8 Inches. IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

200 Solder up or Tail and Insulated Wire icro- ermetic onnectors Rear anel ount ayout Table I: imensions ax. ax ax. ax. ax. ax. ax. In. In. ±.005 ± 0.3 In OTTS #2-56 TRS 00 OTTS #4-40 TRS In. ±.003 I T T OS # ±.005 (2.39 ± 0.3) ± 0.08 In. In. In. ±.004 SOR U TI R-WIR ± 0.0 TWO ROW.80 (4.57) X. TR, OUR ROW.260 (6.60) X..25 ±.05 (3.8 ± 0.38).02/.08 (0.53/0.46) OXY In. In. WIR T +.0 (2.54)/ (2.7) X. 9S S S S S S S 2 Row S 3 Row S In. ±.004 ± 0.0 In. IX icro- ermetic 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

201 icro- ermetic Solder up or Tail and Insulated Wire icro- ermetic onnectors Rear anel ount Table II: anel utout imensions for and U RIUS Ø.34 ±.004 (3.40 ± 0.0) 2 S ayout In. ±.003 ± 0.08 In / /-0.0 In / / row row IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

202 Section Well aster igh Temperature icro icro- Well-aster 260 T Inulsated Wire igtails age -3 T ack-to ack age -6 T eader age -9 T roduct Selection uide T Well-aster igh Temperature icro- Oil, gas and geothermal wells can expose electronic equipment to temperatures in excess of 200, exceeding the recommended operating temperature of standard icro- onnectors. or these demanding environments lenair has developed the Well- aster to provide continuous operation in temperatures of 260 or more. With key features such as rugged assivated Stainless steel shells and hardware, high temperature liquid crystal polymer () insulators allow these connectors to survive the most demanding high-temperature environments. igh Temperature icro- with insulated Wire igh Temperature ack-to-ack icro- igh Temperature ack-to-ack icro- IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

203 icro- Well-aster 260 T Well-aster 260 igh Temperature icro- IX lenair Well-aster T 260 icro- Withstands xtreme igh Temperature Standard icro- connectors are rated for +25. lenair's W icro- can withstand +50 continuous operating temperature and can be upgraded to +200 if assembled with special high temperature epoxies. ut oil, gas and geothermal wells can subject electronic instruments to temperatures as high as The T Series icro- meets the need for a high density, high performance connector capable of handling this temperature. The T features contacts made from a special alloy that resists softening when exposed to temperatures up to +260 (500 ). Rugged passivated stainless steel shells and hardware, high temperature liquid crystal polymer () insulators allow these connectors to survive the most demanding environments. Unique angled mounting ears allow the Well-aster 260 to fit in confined spaces. ontacts Insulators Shell ounting ardware Insulated Wire +260 eader aterials and inishes roprietary nickel alloy, gold plated iquid crystal polymer () Stainless steel, passivated Stainless Steel T igh Temperature ontact rrangements ickel-coated copper, T insulation per 22759/87 (260 ) +260 able onnector urrent Rating ontact Resistance ielectric Withstanding Voltage Insulation Resistance Specifications 3 mps 8 milliohms maximum 600 Vac sea level 5000 megohms minimum Operating Temperature -55. to Shock 50 g. Vibration 20 g Operating Temperature ngled ounting ars to it in Small iameter Instruments igh Reliability Twistin ontact System with Special igh Temperature lloy.050" itch ontact Spacing for Reduced Size re-wired or ating face of pin connector. Socket connector contact numbers are reversed. 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

204 icro- Well-aster 260 T Well-aster 260 igh Temperature icro- Insulated Wire onnectors T re-wired onnectors with +260 il Spec T/olyimide Wire T Well-aster 260 pre-wired icro- connectors withstand +260 continuous operating temperature. These.050" pitch icro- connectors are terminated to #24 W insulated wire. ickel-coated copper wire conforms to 22759/87, T/polyimide insulation. in contacts are gold-plated high performance twistpin type and are recessed into insulator to prevent damage. Special nickel alloy contact material resists softening in high heat. achined passivated stainless steel shell. lass-filled high temperature thermoplastic insulators. 00% hi-pot tested. eets performance requirements of I-T vailable with 9 to 5 contacts. 3., 600 Vac, -55 to ow To Order T re-wired ssembly T Sample art umber -3 S -4 T -8 Series T lenair igh Temperature icro Shell Size 9, 5, 2, 25, 3, 37, 5 See Table II for Thru-ole and ackscrew onnector imensions and Table III for Integral ackpost onnector imensions ontact Type - in/lug Wire age (W) 4 #24 Wire Type T T/olyimide Insulated ickel oated opper Wire olor White Wire ength (Inches) 8 Wire ength In Inches. 8 Specifies 8 Inches. ounting ardware - Std. Thru-ole (Ø.089/.095) - ex ead ackscrew S - Slot ead ackscrew - Integral ackpost (See Table I) and S 2-56 ackscrews # Slot head (S), ex ead () (or dimensions see Table II) S - Socket/Receptacle Table I: T ounting ardware Std. Thru-ole ounting.096/.088 (2.43/2.23) ia. (or dimensions see Table II) Integral ackpost #2-56 (or dimensions see Table III) in in in Socket Socket IX Socket 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

205 icro- Well-aster 260 T Well-aster 260 igh Temperature icro- Insulated Wire onnectors IX.25 (5.46) ax ayout Table II:T re-wired onnector imensions for Thru-ole and ackscrew Versions in (lug) onnector In. ax. ax. ax. ax. ax. in.75 (4.45) ax In. ±.003 ± (2.39) ength +.00/-0.00 (+2.5/-0.0).25 (5.46) ax In. In. In. Socket (Receptacle) onnector.25 (5.46) ax In. ± (4.45) ax ± 0.08 In. In S S S S S S S Skt.094 (2.39) ength +.00/-0.00 (+2.5/-0.0) 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

206 T Well-aster 260 igh Temperature icro- Insulated Wire onnectors icro- Well-aster (5.46) X ayout In. Table III: T re-wired onnector imensions Integral ackpost Version in (lug) onnector ax. ax. ax. ax. ax. I In. ± (4.45) X ± (2.39) T +.00/-0.00 (+2.5/-0.0) 2X U.90 (4.83) I.90/.85 (4.83/4.70).25 (5.46) X In. In. In. In. ±.003 Socket (Receptacle) onnector ± X U.80 (4.57) I In. In. In S / / S / / S / / S / / S / / S / / S / /.25 (5.46) X ST.75 (4.45) X T +.00/-0.00 (+2.5/-0.0) IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

207 icro- Well-aster 260 T Well-aster 260 igh Temperature icro- ack-to-ack able ssemblies T ack-to-ack able ssemblies T Well-aster 260 back-to-back icro- cable assemblies withstand +260 continuous operating temperature. These.050" pitch icro- connectors are terminated to #24 W insulated wire. ickel-coated copper wire conforms to 22759/87, T/polyimide insulation. in contacts are gold-plated high performance twistpin type and are recessed into insulator to prevent damage. Special nickel alloy contact material resists softening in high heat. achined passivated stainless steel shell. lass-filled high temperature thermoplastic insulators. eets performance requirements of I-T vailable with 9 to 5 contacts. 3., 600 Vac, -55 to ow To Order T ack-to-ack ssembly Sample art umber Shell Size Series T -3 S -6 T -8 T lenair igh Temperature icro 9, 5, 2, 25, 3, 37, 5 See Table II for Thru-ole and ackscrew onnector imensions and Table III for Integral ackpost onnector imensions - in onnector oth nds S - Socket onnector oth nds S - in onnector to Socket onnector ontact Type Wire age (W) 4 - #24 Wire Type T - T/olyimide Insulated ickel oated opper Wire olor - White Wire ength (Inches) 8 - Wire length in Inche (2" minimum for 2 rows, 3" minimum for 3 rows) ounting ardware - Std. Thru-ole - ex ead ackscrew S - Slot ead ackscrew - Integral ackpost (See Table I) Table I: T ounting ardware Std. Thru-ole ounting.096/.088 (2.43/2.23) ia. (or dimensions see Table II) and S 2-56 ackscrews # Slot head (S), ex ead () (or dimensions see Table II) Integral ackpost #2-56 (or dimensions see Table III) in in in Socket Socket Socket IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

208 T Well-aster 260 igh Temperature icro- ack-to-ack able ssemblies icro- Well-aster (5.46) X Shell Size In. Table II: T ack-to-ack imensions for Thru-ole and ackscrew Versions I.75 X.094 (2.39) Wire ength +.00/ (2.39) ST.25 (5.46) X.25 (5.46) X.75 X ax. ax. ax. ax. ax. In. ±.003 ± 0.08 In. In. In. In. ±.003 ± 0.08 In. In S S S S S S S IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

209 icro- Well-aster 260 T Well-aster 260 igh Temperature icro- ack-to-ack able ssemblies IX ayout In..25 (5.46) X.75 (4.45) X Table III: T ack-to-ack imensions for Integral ackpost Versions ax. ax. ax. ax. ax. In. ±.003 I ± X U.90 (4.83) I Wire ength +.00/ /.85 (4.83/4.70).094 (2.39) In. In. In..25 (5.46) X In. ±.003 ± (5.46) X In. In. In S / / S / / S / / S / / S / / S / / S / / ST 2X U.80 (4.57) I.75 X 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

210 T Well-aster 260 igh Temperature icro- Right ngle rinted ircuit oard eaders icro- Well-aster 260 T Right ngle rinted ircuit oard eaders T Well-aster 260 right angle icro- connectors withstand +260 continuous operating temperature. These.050" pitch icro- connectors have.020 inch diameter (0.5mm)gold-plated terminals. Terminal spacing is.00 inch by.075 inch (2.54 by.9mm). in contacts are gold-plated high performance twistpin type and are recessed into insulator to prevent damage. Special nickel alloy contact material resists softening in high heat. achined passivated stainless steel shell with integral jackpost. lass-filled high temperature thermoplastic insulators to withstand soldering heat. eets performance requirements of I-T vailable with 9 to 5 contacts. 3., 600 Vac, -55 to I (U) OTOR SOT (RT) OTOR T Right ngle onnector Ordering Information ayout.080 Inch (2.03mm) Terminal ength.0 Inch (3.8 mm) Terminal ength.50 Inch (3.8 mm) Terminal ength.72 Inch (4.37 mm) Terminal ength.90 Inch (4.83 mm) Terminal ength.205 Inch (2.03mm) Terminal ength 9 T-9R-.080 T-9R-.0 T-9R-.50 T-9R-.72 T-9R-.90 T-9R S T-9SR-.080 T-9SR-.0 T-9SR-.50 T-9SR-.72 T-9SR-.90 T-9SR T-5R-.080 T-5R-.0 T-5R-.50 T-5R-.72 T-5R-.90 T-5R S T-5SR-.080 T-5SR-.0 T-5SR-.50 T-5SR-.72 T-5SR-.90 T-5SR T-2R-.080 T-2R-.0 T-2R-.50 T-2R-.72 T-2R-.90 T-2R S T-2SR-.080 T-2SR-.0 T-2SR-.50 T-2R-.72 T-2SR-.90 T-2SR T-25R-.080 T-25R-.0 T-25R-.50 T-25R-.72 T-25R-.90 T-25R S T-25SR-.080 T-25SR-.0 T-25SR-.50 T-25SR-.72 T-25SR-.90 T-25SR T-3R-.080 T-3R-.0 T-3R-.50 T-3R-.72 T-3R-.90 T-3R S T-3SR-.080 T-3SR-.0 T-3SR-.50 T-3SR-.72 T-3SR-.90 T-3SR T-37R-.080 T-37R-.0 T-37R-.50 T-37R-.72 T-37R-.90 T-37R S T-37SR-.080 T-37SR-.0 T-37SR-.50 T-37SR-.72 T-37SR-.90 T-37SR T-5R-.080 T-5R-.0 T-5R-.50 T-5R-.72 T-5R-.90 T-5R S T-5SR-.080 T-5SR-.0 T-5SR-.50 T-5SR-.72 T-5SR-.90 T-5SR-.205 IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

211 icro- Well-aster 260 T Well-aster 260 igh Temperature icro- Right ngle rinted ircuit oard eaders.90/.85 (4.83/4.70) ayout.444 (.28) In. Table I: T Right ngle imensions for in (lug) onnector.5 (2.92).35 (8.00) ax. ax. ax. ax. ax. In. ±.003 I 4Xø ± X U.90 (4.83) I.334 (8.48).334 (8.48) 2X U TRU-O In. In. In. In. In. In X.020 (0.5) TRI T ±.05 (0.38).020 (0.5) ±.002 (0.05) IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

212 Well-aster 260 igh Temperature icro- Right ngle rinted ircuit oard eaders icro- Well-aster 260 Table II: T Right ngle imensions for Socket (Receptacle) onnector 2X U.80 (4.57) I 4X.020 (0.5) TRI T ±.05 (0.38) ST.324 (8.23).020 (0.5) ±.002 (0.05).444 (.28) ayout.5 (2.92) 4Xø In. ax. ax. ax. ax. In. ±.003 ± (8.23).35 (8.00) 2X U TRU-O In. In. In. In. In. 9S S S S S S S IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

213 icro- Well-aster 260 T Well-aster 260 igh Temperature icro- Right ngle rinted ircuit oard eaders TY.025 (0.64) TY T Right ngle oard ayouts: in (lug) onnector atterns shown are for component mounting side of. Terminals are.022 (0.56) max. diameter, mounting holes are.093 (2.36) diameter. Segmented lines represent connector body envelope and integral standoff locations (4.35).00 (2.54) TY.250 (6.35) (0.64).050 (.27).00 (2.54) TY.35 (8.00).05 (0.38) TY.00 (2.54) TY.75 (4.45) (0.64).75 (8.6) 9 I 5 I.865 (2.97).050 (.27).35 (8.00).05 (0.38) TY.00 (2.54) TY.300 (7.62) (24.5) 2 I 25 I.050 (.27).35 (8.00).05 (0.38).050 (.27).35 (8.00).05 (0.38).025 (0.64) IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

214 T Well-aster 260 igh Temperature icro- Right ngle rinted ircuit oard eaders icro- Well-aster 260 T Right ngle oard ayouts: in (lug) onnector atterns shown are for component mounting side of. Terminals are.022 (0.56) max. diameter, mounting holes are.093 (2.36) diameter. Segmented lines represent connector body envelope and integral standoff locations. TY TY.025 (.635) TY TY.075 (.905) TY.00 (2.54) TY.00 (2.54) TY.375 (9.53) (.43).025 (0.64).5 (28.32) 3 I.00 (2.54) TY (0.64).265 (32.3) 37 I I.050 (.27).35 (8.00).050 (.27).075 (.90) TY.05 (0.38).35 (8.00).05 (0.38).060 (.52) IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

215 icro- Well-aster 260 T Well-aster 260 igh Temperature icro- Right ngle rinted ircuit oard eaders T Right ngle oard ayouts: Socket (Receptacle) onnector atterns shown are for component mounting side of. Terminals are.022 (0.56) max. diameter, mounting holes are.093 (2.36) diameter. Segmented TY TY.025 (0.64) (4.35).00 (2.54) TY.250 (6.35) lines represent connector body envelope and integral standoff locations..050 (.27).00 (2.54) TY.35 (8.00).05 (0.38) TY.00 (2.54) TY.75 (4.45) (0.64).75 (8.6) 9 SOT 5 SOT (0.64).865 (2.97).050 (.27).35 (8.00).05 (0.38) TY.00 (2.54) TY.300 (7.62) (24.5) 2 SOT 25 SOT.050 (.27).35 (8.00).05 (0.38).050 (.27).35 (8.00).05 (0.38).025 (0.64) IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

216 T Well-aster 260 igh Temperature icro- Right ngle rinted ircuit oard eaders icro- Well-aster 260 T Right ngle oard ayouts: Socket (Receptacle) onnector atterns shown are for component mounting side of. Terminals are.022 (0.56) max. diameter, mounting holes are.093 (2.36) diameter. Segmented lines represent connector body envelope and integral standoff locations. TY TY.025 (.635) TY TY.075 (.905) TY.00 (2.54) TY.00 (2.54) TY.375 (9.53) (.43).025 (0.64).5 (28.32) 3 SOT.00 (2.54) TY (0.64).265 (32.3) 37 SOT SOT.050 (.27).050 (.27).35 (8.00).05 (0.38).35 (8.00).075 (.90) TY.05 (0.38).060 (.52) IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

217 Special pplications lenair mo-os Increase connector performance lenair od-odes offer a variety of customizations to commericial connectors to meet your specific application requirements such as space grade outgassing. anufacturers of satellite communications systems, geophysical exploration devices, medical diagnostics and industrial equipment face many of the same packaging requirements for reduced size, weight and shape as do their military couterparts. The ability to design-in a wide range of custom modifications which fit the unique packaging requirements of these specialized applications is a distinct advantage of the lenair icro-. lenair, Inc. 2 ir Way lendale, [email protected]

218 Section icro- Special pplications and odifications icro- Special pps and Os od ode 474 age -2 od ode 497 age -4 od ode 497 age -5 od ode 428 age -6 od ode 429 age -7 S/T IST-002: Instructions for arts Selection, Screening, ualification, and erating repared by: r. usum Sahu Reviewed by: r. enning eidecker pproved by: arryl akins ational eronautics and Space dministration oddard Space light enter reenbelt, aryland 2077 ay 2003 icro- od ode ist od 474 eying Option Specially modified shells feature keys and keyways for up to five keying positions. ompatible with standard hardware and backshells. od 497 round Spring Improve I shielding with plug connector ground springs. These gold-plated springs offer lower shellto-shell resistance and are compatible with standard mating receptacles. od 497 round Spring Installation rocedure omplete and easy to follow step-by-step installation instructions for icro- all round Spring. Installed in four simple steps, this gold-plated stainless steel ground spring offers substantial improvement in I protection. od 428 for 200. ontinuous Temperature Standard icro- connectors are rated for 50. maximum continuous temperature. od 428 changes the potting compound to provide a 200. rating. od 429 Space rade icro- Save time and cost with the od 429 solution. Specify special S requirements without the expense of having to create special procurement documentation. This section also contains valuable information on icro- s for space applications. IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

219 icro- Special pps and Os IX lug onnector With od 474 eying Option icro- od ode 474 eying Options ow To Order icro- onnectors With od 474 Step : ind a Standard icro- art umber od 474 keying is available on all standard metal shell icro- connectors, including solder cup, pre-wired and printed circuit board versions. This feature is not available on plastic icro- or 8353 connectors. Step 2: ick a eying osition letter code identifies the key position. The table on the following page shows the keying options for each shell size. od ode 474 mates to 474 receptacles, and so on. Step 3: dd the od ode to the art umber letter code identifies the key position. The table on the following page shows the keying options for each shell size. od 474 plugs mate to 474 receptacles, and so on. revent is-ating with od ode 474 eying Option eyed icro- connectors for fail-safe circuits feature specially modified shells to prevent mis-mating. The plug shell has a raised key, and the receptacle shell has a keyway. The nine pin connector accommodates three key positions. ll other sizes have five positions available. The letter code following od ode 474 specifies the key position. 474 plugs mate to 474 receptacles. eyed plugs will not mate to unkeyed receptacles, but keyed receptacles will plug into standard unkeyed plugs. icro- ey ositions: odification ode 474 xample: W2-5R-.0 xample: 474 xample: W2-5R lug lug lug lug lug OST OST OST OST ig. ig. 2 ig. 3 ig. 4 ig. 5 Receptacle Receptacle Receptacle Receptacle Receptacle OST OST OST OST ig. 6 ig. 7 ig. 8 ig. 9 ig. 0 igure plug connector mates to igure 6 receptacle, figure 2 mates to figure 7, and so on. igure mates to figure 2. lug ig. Receptacle ig. 2 ating face of connector shown. 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

220 icro- od ode 474 eying Options and Rear anel ount anel utouts icro- Special pps and Os ayout ey osition Offsets ey osition ey osition ey osition ey osition ey osition Offset Offset Offset Offset Offset igure In. igure In. igure In. igure In. igure In S S S S S S S S S S S S S XØ Size XR..05 X. (0.4 X.) od ode 474 Rear anel ount anel utouts ayout (0.0) (0.0) (0.076) (0.076) Ø (0.05) IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

221 icro- Special pps and Os icro- od ode 497 I round Spring RUY (z) Improve I erformance with od ode 497 round Springs Today s military and aerospace electronics systems require improved I protection. icro- connectors are widely used in I applications; however, the shell-to-shell resistance of a mated pair can vary, resulting in inconsistent levels of shielding effectiveness. round springs assure consistent shell-to-shell resistance for improved I protection. round Spring and I Shielding ffectiveness gold-plated stainless steel ground spring on the pin connector mating face offers substantial improvement in I protection. The graphs compare identical connectors tested with and without ground springs. SII TIVSS (d) I erformance with round Spring Step : ind a Standard icro- art umber round springs are available on all standard icro- plug connectors with solder cups, insulated wire, or printed circuit board. round spring usage is limited to pin connectors with electroless-nickel plated shells, or gold plated shells. Step 2: dd the od ode to the art umber ow To Order icro- onnectors With od 497 Springs SII TIVSS (d) I erformance without round Spring RUY (z) xample: W lugs only (pin connectors) 2. ickel-plated aluminum shells only xample: W IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

222 icro- od ode 497 I round Spring Installation rocedure icro- Special pps and Os Step ocate weld site on spring, indicated by a deformation in ring and a doubling of coils. ote: When fitting spring to connector ensure that weld sits on the flat faces of the icro connector as illustrated in Step 2. Step 2 lace spring into one end of groove on connector plug and stretch spring to sit in channel. nsure that weld sits on flat face of plug. omplete fitting spring around channel while maintaining position of weld on flat faces of plug. Step 3 nsure that the spring is properly seated in the channel by using a plastic mechanical pencil or similar item to rotate/ manipulate the spring into position. ote: erform this manipulation carefully and incrementally. o not simply slide the mechanical pencil/tool across the spring as this can unevenly distribute more of the spring into one area of the slot, resulting in deformation of spring material and lead to binding/crashing when mating connectors. Step 4 Incorrectly seated spring (pre manipulation) Weld position should be located on top or bottom flat face rofile View orrectly seated spring (post-manipulation) heck for proper fitting and for binding points in mating process. Three mating cycles are recommended to ensure a proper fit. ote: Weld on spring may appear discolored, this is normal. spring channel IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

223 icro- Special pps and Os icro- od ode 428 for Operating Temperature IX otting a icro- with poxy-illed Syringe Special i-temp ickel lated luminum Shell 200. Teflon Wire lug Upgrade to 200 elcius with od ode 428 igh Temperature poxy The search for oil and gas has led to deeper reservoirs where extreme temperatures and pressures test the limits of electronics design. Oil well logging instruments must be able to withstand temperatures beyond the limits of standard connectors. icro- connectors are made from temperature-resistant materials. The iquid rystal olymer () glass-filled thermoplastic insulators easily withstand 400. The luorosilicone seals, Twistin contacts and aluminum shells also are rated for continuous exposure to 400. The epoxy potting compound is the only component not rated for high temperature. od ode 428 upgrades the standard epoxy with a special 600. epoxy. Twistin ontact Insulator Step : ind a Standard icro- part umber od 428 is available on all standard metal shell icro- connectors, including solder cup, pre-wired and printed circuit board versions. ot available on plastic icro- or 8353 connectors. Step 2: dd the od ode to the art umber. Shell aterial & inish: 2. otting ompound: 200 Rated poxy Socket ontact lourosilicone Interfacial Seal Receptacle ow To Order icro- onnectors With od 428 i Temp pplication otes ickel lated luminum Shell Insulator xample: W2-37S. etal shell only 2. ickel-plated aluminum or stainless steel shells only. xample: W2-37S-428 Special i-temp 200. Teflon Wire lectroless nickel plated aluminum is commonly used for high temperature connectors. admium plated aluminum is not recommended for temperatures exceeding 75. because of discoloration and breakdown of the chromate seal applied to the cadmium. Stainless steel shells provide the best resistance to temperature and corrosive environments, but at the expense of weight and cost. 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

224 icro- od ode 429 Space rade icro- Special pps and Os etail of the tmospheric Infrared Sounder Instrument (IRS) with lenair icro- ables and onnectors hoto courtesy Six things you should know about icro- connectors for space flight Outgassing : What is outgassing, why is it important, and how does it affect connector selection? Is special processing required to meet outgassing requirements? 2Screening : What is S screening and what level of screening is required? 3agnetic permeability : re nonmagnetic connectors required? 4ryogenic exposure : re icro- connectors suitable for exposure? 5aterials : icro- connectors offer a variety of materials and plating finishes. Which ones are recommended for space flight? 6Wire orrosion : 22759/33 irradiated Tefzel wire is preferred for space applications. What about corrosion problems caused by this wire? Save Time and ost with od ode 429 Space rade icro- s icro- Twistin connectors are a good choice for all types of orbital and deep space projects. lenair s od ode 429 upgrades icro- s to S requirements without the need for a customer Statement of Work or Specification ontrol rawing. This section explains lenair od ode 429 ordering, and provides valuable information on outgassing and other space flight topics. S Screening evel evel ighest Reliability evel 2 igh Reliability evel 3 Standard Reliability ow To Order Space rade icro- s Step : ind a Standard icro- art umber lectroless nickel plated shells and Tefzel wire are preferred for space flight. admium plating is prohibited. Step 2: Select a S Screening evel The term Screening evel refers to the final inspection procedure. evel for mission-critical highest reliability evel 2 for high reliability evel 3 for standard reliability Step 3: Outgassing rocessing detailed explanation of outgassing is on the following pages. The interfacial seal on icro- receptacles does not meet S outgassing requirements unless it is baked or thermal vacuum outgassed. Some customers specify deleting the seal, some opt for a bakeout, and some customers specify thermal vacuum outgassing. oth the bakeout and thermal vacuum outgassing are extra cost. Step 4: Select the od ode 429 that atches the esired evel of Screening and Outgassing Use the following table to choose the right modification code. dd the mod code to the connector part number. xample: W Special Screening Only Interfacial Seal is Installed od ode 429 od ode 429 (Use standard part number) Interfacial Seal is eleted od ode 429 od ode 429 od ode 432 Special Screening lus Outgassing rocessing 48 our Oven ake 75. od ode 429 od ode 429 od ode 86 Thermal Vacuum Outgassing 24 hrs. 25. od ode 429 od ode 429 od ode 86 IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

225 icro- Special pps and Os icro- od ode 429 Space rade IX Outgassing : What is outgassing and how does it affect connector selection? Is special processing required to meet outgassing requirements? What is outgassing? lastic and rubber materials give off gaseous molecules. or example, the smell inside a new car is caused by polymer outgassing. eat and vacuum increase the rate of diffusion. In a spacecraft the gases coming off polymers can contaminate optical surfaces and instruments. The result is degraded performance. ow is outgassing measured? The space industry has adopted a standardized test procedure, ST 595, to evaluate out-gassing properties of polymers. Small samples of material are heated to 25. at a vacuum of 5 X 0-5 torr for 24 hours. Then the sample is weighed to calculate the Total ass oss (T). The T cannot exceed.00% of the total initial mass. uring the test, outgassed matter condenses on a cooled collector plate. The quantity of outgassed matter is caluclated to determine the ollected Volatile ondensable aterial (V). The V cannot exceed 0.0% of the original specimen mass. omponent Thermoplastic Insulators and Trays otting ompound Table : Outgassing roperties Of icro- onnectors aterial iquid rystal olymer poxy rand ame Vectra -30 ysol % Total ass oss (T) % ollected Volatile ondensable aterial (V) Test Report S Test #S lenair Test Interfacial Seal as received luorosilicone (none) lenair Test Interfacial Seal with Oven akeout 8 hrs Interfacial Seal with Thermal Vacuum akeout24 hrs. 25. I-T-8353 specifies that icro- connectors must meet outgassing requirements, but the interfacial seal exceeds the limit. ow can this be? The mil spec allows the T and V to be calculated based on the total mass of the nonmetallic components. The interfacial seal can exceed outgassing limits as long as the insulator and potting compound are well below maximum outgassing limits. Is special outgassing necessary? It depends on the customer. Some programs specify that all connectors be oven baked or thermal vacuum outgassed. or example, S S programs typically require that the interfacial seals are deleted,along with level I screening and thermal vacuum outgassing processing. Why pay extra for bakeout or thermal vacuum outgassing? If the interfacial seal is not removed, S recommends a bakeout process. Table demonstrates that a simple oven bake is sufficient to reduce volatile matter. The choice is up to the customer. Whatever level of processing, the lenair mod 429 codes make ordering easy. luorosilicone (none) lenair Test luorosilicone (none) lenair Test Wire Tefzel Tefzel Outgassing t-a-lance luorosilicone Interfacial Seals exceed S outgassing limits. 2S recommends removing the seal or performing a bakeout. 3n inexpensive oven bakeout has better results than the more costly thermal vacuum outgassing. 4lenair od 429 codes provide an easy ordering solution, whatever the outgassing option. S Test #S lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

226 icro- od ode 429 Space rade icro- Special pps and Os screening : What level of screening 2 is required? What is S screening? S specification -IST-002 (see figure 2) provides instructions on selecting, screening and qualifying parts for use on S S space flight projects. Table 2 in the S spec contains specific inspection instructions for I-T-8353 connectors. These screening requirements exceed the standard mil spec inspection levels. What screening level is required? S defines three levels of screening: level for highest reliability, level 2 for high reliability, and level 3 for standard reliability. evel 3 equates to standard 8353 roup and lot acceptance testing, and levels and 2 call for additional testing. Why does lenair perform extra screening tests? lenair has test procedures that go beyond the letter of the S spec. eeting S requirements means not only inspecting per -IST-002, but also building parts in accordance with S Technical Standard S- ST rimping, Interconnecting ables, arnesses, and Wiring. lenair fully meets these requirements and has obtained S certification. Our extra inspection steps reflect the fact that pre-wired connectors not only require best practices on the assembly floor, but also require thorough final electrical and mechanical testing. What about qualification requirements? ualification is not required if the manufacturer has performed qualification testing per I-T ualification by similarity is usually invoked for those icro- s not specifically covered by the mil spec. ue to the dynamic nature of this document, users are advised to check the website prior to every usage to obtain the latest document revision..0 UROS The purpose of this document is to establish baseline criteria for selection, screening, qualification, and derating of parts for use on S S space flight projects. This document shall provide a mechanism to assure that appropriate parts are used in the fabrication of space hardware that will meet mission reliability objectives within budget constraints. 2.0 SO This document provides instructions for meeting three reliability levels of parts requirements (see 6.0) based on mission needs. The terms grade and level are considered synonymous; i.e., a grade part is consistent with reliability level. evels of part reliability confidence decrease by reliability level, with level being the highest reliability and level 3 the lowest. reliability level part has the highest level of manufacturing control and testing per military or S specifications. evel 2 parts have reduced manufacturing control and testing. evel 3 arts have no guaranteed reliability controls in the manufacturing process and no standardized testing requirements. The reliability of level 3 parts can vary significantly with each manufacturer, part type and due to unreported and frequent changes in design, construction and materials. S projects and contractors shall incorporate this guideline into their roject arts rogram. 3.0 IITIOS Screening. Screening tests are intended to remove nonconforming parts (parts with random defects that are likely to result in early failures, known as infant mortality) from an otherwise acceptable lot and thus increase confidence in the reliability of the parts selected for use. igure : xcerpt from S -IST-002 Table 2: S Screening Requirements Inspection/ Test S evel S evel 2 Visual Inspection (3X magnification) 00% 00% echanical 2 pcs. 2 pcs. Voltage (WV) 00% 2 pcs. Insulation Resistance 2 pcs. 2 pcs. Temperature ycling 2 pcs. / ow evel ontact Resistance 2 pcs. 2 pcs. ating orce 2 pcs. / Solderability/Resistance to Soldering eat 2 pcs. / otes:. S screening requirements from Table 2 of -IST-002. IX 203 lenair, Inc. igh erformance icro- onnectors and ables Rev U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

227 icro- Special pps and Os icro- od ode 429 Space rade IX 3agnetic permeability : re nonmagnetic connectors required? Spacecraft designers generally avoid the use of ferromagnetic materials, which can become magnetized and can interfere with sensitive instruments. icro- connectors do not contain ferromagnetic materials, so magnetic permeability is not a concern. I- T-8353 requires a maximum permeability of 2 mu. lenair hermetic icro- connectors are made from ovar alloy, a highly magnetic material. The stainless steel e-rings commonly used for icro- jackscrew attachment also exceed the 2 mu requirement. 4ryogenic exposure : re icro- connectors suitable for -200.? icro- connectors are rated to -55. lenair has not performed testing below this temperature. -IST-002 states...experience has proven it is possible for (non-certified) connector types to be used successfully at cryogenic temperatures. It is recommended that connector samples should be subjected to five cycles of cryogenic temperature...(followed by examination for cracks and WV). 5aterials : icro- connectors offer a variety of materials and plating finishes. Which ones are recommended for space flight? S recommends electroless nickel plated connector shells and crosslinked high strength T (Tefzel ) wire. admium plating is prohibited because it sublimates in a vacuum environment. old plating is acceptable but rarely used on icro- connector shells. S recommends electroless nickel plated connector shells and crosslinked high strength T (Tefzel ) wire. admium plating is prohibited because it sublimates in a vacuum environment. old plating is acceptable but rarely used on icro- connector shells. 6Wire orrosion : 22759/33 irradiated Tefzel wire is preferred for space applications. What about corrosion problems caused by this wire? oes 22759/33 wire have an outgassing problem? Irradiated Tefzel wire is known to cause tarnishing and corrosion of metal parts in close proximity, usually in sealed bags. oth I-T-8353 and S -IST-002 contain cautionary notes regarding this problem. Wire manufacturers have not been able to eliminate this problem, which might be caused by the insulation extrusion process. This corrosion problem is referred to as wire outgassing, which has led to confusion over the term outgassing. This problem has nothing to do with the ability of the wire to meet the T and V outgassing requirements of ST /33 irradiated Tefzel wire continues to be the wire of choice for spacecraft. This wire complies with outgassing requirements. The corrosion problem icro- connectors supplied as prewired assemblies should not be stored in sealed bags for extended periods. S recommends that parts be inspected for shell discoloration ( a dull gun metal appearance) and contact corrosion ( a flat black appearance ). onnectors with corroded contacts should be scrapped. ew Unit ack inimizes orrosion lenair has adopted a new packaging standard to protect the connector from igure 2 Teflon-wrapped onnector and erforated ag Users are advised that some T insulations are known to outgas trace amounts of corrosive fluorine over time. When this wire is used with nickel coated metal shell connectors and stored in sealed plastic or S bags, trapped fluorine can attack exposed metal shells and contacts. xcerpt from ote 9, Table 2, S -IST-002 tarnishing or corrosion. igure 2 shows lenair s standard packaging for metal shell connectors supplied with 22759/33 wire. The connector is wrapped in Teflon tape and placed in a ventilated sulpher-free paper envelope. 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

228 roduct Selection uide lenair s omplete icro- roduct ine includes all 8353 icro- connectors. hoose Solder up, re-wired or versions. lenair 8353 connectors always use Twistin ontacts for high performance, made in U.S.. etal Shell 8353/0 & 02 age -4 lastic Shell 8353/06 & 07 age -7 etal Shell 8353/03 & 04 age -5 lastic Shell 8353/08 & 09 age -8 Section I-T-8353 icro- onnectors 8353/0 to 5 Right ngle arrow age /6 to 2 Right ngle Wide Style age /22 to 27 Vertical ount age /28 Thru 33 ompact Vertical age /05 ardware its age /0, /02, /06, /07 Solder up etal or lastic Shell These connectors feature gold-plated solder cup contacts for termination to #26 W or smaller wire. 8353/03, /04, /08, /09 re-wired igtails, etal or lastic Shell These crimped, epoxy-potted assemblies are available with insulated 9 strand #26 W wire or with #25 W uninsulated single strand wire. Insulated wire options include wire type, color code and length. Uninsulated wires are gold-plated or Snb 60/40 solder dipped. 8353/0 Thru 2 Right ngle.00" itch rinted ircuit oard onnectors Select vertical or right angle mounting. tails are.020 inch (0.50 ) diameter on a.00 inch (2.54 ) offset grid. ackposts and threaded inserts are available. 8353/22 Thru 33 Vertical ount rinted ircuit oard These recent additions to the mil spec feature.075 inch by.00 inch terminal spacing. The plastic tray does not extend beyond the envelope of the metal connector shell. 8353/05 ackscrews and ackposts These hardware kits contain stainless steel jackscrews in two lengths. hoose slot head or hex head. ackscrews attach with e-rings. ackposts also are stainless steel. IX icro- I-T lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

229 icro- I-T-8353 I-T-8353 icro- onnectors IX I-T-8353 t--lance TI SIITIO OTORS, TRI, RTUR, IROIITUR, ORIZ S, R SIITIO OR This specification is approved for use by all epartments and gencies of the epartment of efense. I-OU I-T ay 2002 SURSI I-R pril 997. SO. Scope. This specification covers polarized shell, microminiature, rectangular connectors..2 lassification..2. lass - ll plastic (shell and insulator) - etal shell (plastic insulator).2.2 Type I - rimp contacts (nonremovable) II - S older contacts (nonremovable) 2. I OUTS 2. eneral. The documents listed in this section are specified in sections 3 and 4 of this standard. This section does not include documents cited in other sections of this standard or recommended for additional information or as examples. While every effort has been made to ensure the completeness of this list, document users are cautioned that they must meet all specified requirements documents cited in sections 3 and 4 of this standard, whether or not they are listed. 2.2 overnment documents Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are those listed in the issue of the epartment of efense Index of Specifications and Standards (OISS) and supplement thereto, cited in the solicitation (see 6.2). eneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to: efense Supply enter olumbus, TT: S-VI, 3990 ast road Street, olumbus, O by using the Standardization ocument Improvement roposal ( orm 426) appearing at the end of this document or by letter. S / S 5935 ISTRIUTIO STTT. pproved for public release; distribution is unlimited. What is the difference between a lenair OTS icro- and a lenair il Spec icro-? Which is less expensive? ll lenair icro-'s, whether mil spec or OTS, are built with the same components and meet identical requirements. OTS icro- is not a lower cost version of a mil spec part. OTS versions offer more options than the mil spec versions. Which is more readily available: il Spec or OTS? ll 8353 aluminum shell connectors are in stock. ll standard OTS versions are also stocked. What is the difference between a lenair il Spec connector and another brand? I-T-8353 allows the use of low-cost stamped contacts; however, the lenair icro- connector features the high performancetwistin contact system. lenair 8353 connectors are 00% ade in US. lenair's industry-leading icro- capacity and capabilities offer quick worldwide access to the full range of items. bout The il Spec The United States epartment of efense, efense ogistics gency, efense Supply enter, olumbus, Ohio (S, pronounced "essy"), maintains a vast library of military specifications covering all kinds of components used in defense equipment. These mil specs simplify system design and procurement, because mil spec parts do not require costly testing for suitability. asy multiple sourcing is another key advantage of a mil spec part. I-T-8353 is a detail spec controlling dimensions, materials, performance and testing. This spec covers plastic and metal shell icro- connectors. The t--lance anufacturers are required to perform a series of mechanical, electrical and environmental tests in order to be eligible for listing as an approved supplier. When S approval is granted, the manufacturer is added to the ualified roducts ist (). lenair is approved for all 8353 variations. The "Slash Sheets" t--lance In addition to the general specification, I-T-8353 contains a total of 33 etail Specification Sheets, nicknamed "slash sheets" because a forward slash is used in the numbering system. ow to get a copy of the spec S specs are available for download. The documents include: I-T-8353 etail Specification (the general spec) I-T-8353 Slash Sheets (33 individual specs) These specs can be found at: The can be found at: lenair odes (ommercial nd overnment ntity) ode is a five position code that identifies companies doing or wishing to do business with the ederal overnment. lenair uses two codes to identify 8353 products: 06324, lenair, lendale, alifornia 077, lenair icroway ivision, incolnwood Illinois. 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

230 ontacts I-T-8353 icro- onnectors onnector Shell, etal onnector Shell, lastic Insulator Terminal lock, Interfacial Seal in ontact (Twistin) Socket ontact ncapsulant (otting) ackscrews, ackposts igtail Wire, Insulated ookup igtail Wire, Uninsulated 37 ontacts 5 ontacts I-T-8353 contact arrangements (face view pin connector) ontacts ontacts ontacts I-T-8353 aterials and inishes (Specific to lenair) luminum alloy 606 in accordance with S-S---250/ lating ode : admium with yellow chromate conversion coating in accordance with S-S---46, Type II, lass 3 lating ode : lectroless nickel in accordance with S-S-26074, lass 3 lating ode : Stainless steel, 300 series, passivated in accordance with S-S---35 lating ode : ure electrodeposited aluminum in accordance with I-T-83488, type II lating ode : Zinc nickel in accordance with ST 84 over a suitable underplate lating ode T: ickel fluorocarbon polymer, high phosphate nickel with flourocarbon polymer additive over a suitable underplate iquid crystal polymer, 30% glass-filled or ployphenyl sulfide, 40% flass -filled, in accordance with I iquid crystal polymer, 30% glass-filled or ployphenyl sulfide, 40% flass -filled, in accordance with I iquid crystal polymer, 30% glass-filled or ployphenyl sulfide, 40% flass -filled, in accordance with I luorosilicone rubber in accordance with eryllium copper, gold plated in accordance with ST 488 Type II lass.27 (50 icroinches minimum) ode, over nickel underplate in accordance with S-S---290, lass 2 (30 microinches minimum) hos bronze in accordance with ST 39 gold plated in accordance with ST 488 Type II lass.27 (50 icroinches minimum) ode, over nickel underplate in accordance with S-S---290, lass 2 (30 microinches minimum) poxy resin, hysol 425/356 Stainless steel, passivated in accordance with S-S-2700 I-W-22759/: 9 strand silver-coated copper wire, extruded ptfe insulation, 600 volts rms, 200. I-W-22759/33: 9 strand high-strength silver-coated copper alloy wire, crosslinked modified T insulation, 600 volts rms, 200. Wire type 07 and 08: solid copper wire in accordance with , tin/lead plated wire type 05 and 06: solid copper wire in accordance with , gold-plated il-t-8353 erformance Specifications urrent Rating 3 ielectric Withstanding Voltage 600 V Sea evel, 50 V 70,000 eet Insulation Resistance 5000 egohms inimum ontact Resistance 8 illiohms aximum ow evel ontact Resistance 32 illiohms aximum agnetic ermeability 2 µ aximum Operating Temperature -55. to +25. Shock 50 g. Vibration 20 g. Outgassing eets S Outgassing Requirements ating orce (0 Ounces aximum) X (# Of ontacts) Salt Spray 48 ours luminum Shell With admium lating urability 500 ating ycles inimum 00 ontacts 3 ontacts IX icro- I-T lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

231 icro- I-T-8353 I-T-8353/0 & /02 icro- Solder up Terminated, etal Shell onnector IX ayout 8353/0 & /02 Solder up art umbers onfig. lectroless ickel lated luminum Shell admium lated luminum Shell etal Shell Solder up 8353 onnectors feature gold-plated Twistin non-removable contacts for solder termination to W #26 or smaller wire. assivated Stainless Steel Shell 9 lug 8353/0-8353/0-8353/0-9S Receptacle 8353/ / /02-5 lug 8353/0-8353/0-8353/0-5S Receptacle 8353/ / /02-2 lug 8353/0-8353/0-8353/0-2S Receptacle 8353/ / /02-25 lug 8353/0-8353/0-8353/0-25S Receptacle 8353/ / /02- ayout In. ayout imensions onfig. 8353/0 & /02 Solder up art umbers lectroless ickel lated luminum Shell admium lated luminum Shell assivated Stainless Steel Shell 3 lug 8353/0-8353/0-8353/0-3S Receptacle 8353/ / /02-37 lug 8353/0-8353/0-8353/0-37S Receptacle 8353/ / /02-5 lug 8353/0-8353/0-8353/0-5S Receptacle 8353/ / /02-00 lug 8353/0-8353/0-8353/0-00S Receptacle 8353/ / /02- ax. ax. ax. ax. ax. ax. ax. 9-5 OTTS.096/.088 (2.43/2.23) I. 00 OTTS.50/.45 (8.8/3.68) I. In. ±.003 ± 0.08 In. In. In. In. ±.003 ± 0.08 In. In. In S S S S S S S S ±.005 (2.36 ± 0.3).200 (5.08) X.0 (2.79) X 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

232 I-T-8353/03 & /04 icro- re-wired rimp Terminated, etal Shell onnector icro- re-wired igtails These connectors feature gold-plated Twistin contacts and mil spec crimp termination. Specify aluminum shells for best availability. 00% tested and backpotted, ready for use. hoose the Wire Type To it Your pplication or lightest weight and smallest diameter, select 22759/33 space grade insulated wire. ow To Order I-T re-wired etal Shell icro- onnectors Sample art umber m8353 /04 -b 09 n ase art umber Slash umber Shell Size Wire Type Shell inish 8353 /03 in onnector (lug) /04 Socket onnector (Receptacle),,,,,,, (See Table I) odes - specify the shell size. The number of contacts is shown below for reference /-26 Teflon -Insulated ookup Wire 0-8 Inches (457mm), White Inches (94mm), White 03-8 Inches (457mm), 0 olor Repeating Inches (94mm), 0 olor Repeating 3-72 Inches (829mm), White 4-72 Inches (829mm), 0 olor Repeating 25 W Single Strand Uninsulated Wire Inch (2.7mm), old lated Inch (25.4mm), old lated Inch (2.7mm), Tin-ead lated(2) Inch (25.4mm), Tin-ead lated(2) 22759/33-26 Irradiated Tefzel Insulated ookup Wire 09-8 Inches (457mm), White 0-36 Inches (94mm), White - 8 Inches (457mm), 0 olor Repeating 2-36 Inches (94mm), 0 olor Repeating 5-72 Inches (829mm), White 6-72 Inches (829mm), 0 olor Repeating - admium - lectroless ickel - assivated SST - lectrodeposited luminum - Zinc ickel T - ickel luorocarbon olymer otes. Shell aterial & inish: admium plating offers better corrosion resistance compared to nickel, but cad is not acceptable for space or RoS applications. lectroless nickel plated aluminum is recommended for new design activity. Or, choose stainless steel shells for corrosive environments. 2. Tin-lated Wire: lenair 8353 connectors do not contain any components exceeding 97% tin /33 orrosion: The 8353 spec contains a cautionary note regarding 22759/33 wire. The wire insulation is known to cause corrosion to metal parts when stored in a sealed environment. This corrosion has been observed on 8353 connectors. lenair has implemented a packaging procedure to minimize or eliminate this problem. onnectors are individually wrapped with teflon tape, and the unit pack is a perforated paper envelope /33 continues to be the preferred wire for space applications. IX icro- I-T lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

233 icro- I-T-8353 I-T-8353/03 & /04 icro- re-wired rimp Terminated, etal Shell onnector ayout In. Table I: imensions ax. ax. ax. ax. ax. ax. ax. In. ± OTTS.094/.088 (2.39/2.23) I. 00 OTTS.50/.45 (3.8/3.68) I. ± ±.005 (2.36 ± 0.3) In. In. In. In. ±.003 ± 0.08 WIR T +.0/-0.0 (+25.4/-0.0) T OR ISUT STR WIR In. In. In S S S S S S S S T +0.2/-0.0 (+5.08/-0.0) T OR UISUT WIR IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

234 I-T-8353/06 & /07 icro- Solder up Terminated, lastic Shell onnector lastic Shell Solder up 8353 onnectors feature goldplated Twistin non-removable contacts for solder termination to W #26 or smaller wire. These all-plastic connectors are more economical, lighter and smaller than metal shell versions. art umbers ayout onfig. art umber ayout onfig. art umber ayout onfig. art umber 9 lug 8353/06-2 lug 8353/06-3 lug 8353/06-9S Receptacle 8353/07-2S Receptacle 8353/07-3S Receptacle 8353/07-5 lug 8353/06-25 lug 8353/06-37 lug 8353/06-5S Receptacle 8353/07-25S Receptacle 8353/07-37S Receptacle 8353/07-5 lug 8353/06-5S Receptacle 8353/07- ayout In. Table I: imensions.096/.088 (2.43/2.23) I..00/.088 (2.54/2.24) I OTOR ax. ax. ax. ax. ax. ax. ax. ax..0 (2.79) X SOT OTOR In. ±.003 ± (5.08) X In. In. In. In. In. In. In S S S S S S S IX icro- I-T lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

235 icro- I-T-8353 I-T-8353/08 & /09 icro- re-wired rimp Terminated, lastic Shell onnector icro- re-wired igtails These connectors feature gold-plated Twistin contacts and mil spec crimp termination. 00% tested and backpotted, ready for use. hoose the Wire Type To it Your pplication or lightest weight and smallest diameter, select 22759/33 space grade insulated wire. ow To Order I-T-8353 re-wired lastic Shell icro- onnectors Sample art umber m8353/ 09 -g 2 ase art umber Slash umber Shell Size Wire Type 8353 /08 in onnector (lug) /09 Socket onnector (Receptacle),,,,,, (See Table I) odes - specify the shell size. The number of contacts is shown below for reference /-26 Teflon -Insulated ookup Wire 0-8 Inches (457mm), White Inches (94mm), White 03-8 Inches (457mm), 0 olor Repeating Inches (94mm), 0 olor Repeating 3-72 Inches (829mm), White 4-72 Inches (829mm), 0 olor Repeating 22759/33-26 Irradiated Tefzel Insulated ookup Wire 09-8 Inches (457mm), White 0-36 Inches (94mm), White - 8 Inches (457mm), 0 olor Repeating 2-36 Inches (94mm), 0 olor Repeating 5-72 Inches (829mm), White 6-72 Inches (829mm), 0 olor Repeating 25 W Single Strand Uninsulated Wire Inch (2.7mm), old lated Inch (25.4mm), old lated Inch (2.7mm), Tin-ead lated(2) Inch (25.4mm), Tin-ead lated(2) pplication otes. Intermatability: 8353 plastic shell connectors are not intermateable with metal shell 8353 connectors. 2. Tin-lated Wire: lenair 8353 connectors do not contain any components exceeding 97% tin /33 orrosion: The 8353 spec contains a cautionary note regarding 22759/33 wire. The wire insulation is known to cause corrosion to metal parts when stored in a sealed environment. This corrosion has been observed on 8353 connectors. lenair has implemented a packaging procedure to minimize or eliminate this problem. onnectors are individually wrapped with teflon tape, and the unit pack is a perforated paper envelope /33 continues to be the preferred wire for space applications. IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

236 I-T-8353/08 & /09 icro- re-wired rimp Terminated, lastic Shell onnector ayout In..096/.088 (2.43/2.23) I..00/.088 (2.54/2.24) Table I: imensions T OR ISUT STR WIR SOT OTOR T +.0/-0.0 (+25.4/-0.0) T OR UISUT WIR T + 0.2/-0.0 (+5.08/-0.0 ) I OTOR SOT OTOR I OTOR T +.0/-0.0 (+25.4/-0.0) T + 0.2/-0.0 (+5.08/-0.0) ax. ax. ax. ax. ax. ax. ax. ax. In. ±.003 ± 0.08 In. In. In. In. In. In. In S S S S S S S IX icro- I-T lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

237 icro- I-T-8353 I-T-8353/0 Thru /5 icro- R ondensed Right ngle Terminated igh erformance These connectors feature gold-plated Twistin contacts for best performance. tails are.020 inch diameter. Specify nickel-plated shells or cadmium plated shells for best availability. Solder-ipped Terminals are coated with Sn60/b40 tin-lead solder for best solderability. Table I: ardware Options T or U W or Y TRU O ow To Order I-T-8353 Right ngle icro- onnectors Sample art umber m8353/ 3-b 02 n p ase art umber Slash umber- Shell Sizes Tail ength Shell inish ardware Options 8353 lug (in ontacts) Receptacle (Socket ontacts) 0-9 ontacts 3-9 ontacts 0-5 ontacts 3-5 ontacts 0-2 ontacts 3-2 ontacts 0-25 ontacts 3-25 ontacts 0-3 ontacts 3-3 ontacts 0-37 ontacts 3-37 ontacts - 5 ontacts 4-5 ontacts 2-00 ontacts 5-00 ontacts (See Table II) 0.09 Inch (2.77 mm) Inch (3.56 mm) Inch (4.37 mm) Tail ength ±.05 (0.38) - admium - lectrodeposited luminum - lectroless ickel - Zinc ickel - assivated SST T - ickel luorocarbon olymer - o ackpost - ackposts Installed Sizes 9-5 T - Threaded Insert in oard ount ole (o ackposts) W - Threaded Insert in oard ount ole and jackposts Installed Shell Size 00 () U - #4-40 Threaded Insert Y - #4-40 Threaded Insert & ackpost See "ardware Options" below for Illustrations (See Table I) TRU O 2X TR 2X TR ISRTS ISRTS 2X TR ISRTS o ackpost ackpost Threaded Insert ackpost, Threaded Insert IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

238 I-T-8353/0 Thru /5 icro- R ondensed Right ngle Terminated OIURTIO OR 9-25 OTTS 9-5 OTTS #2-56 U-2 TRS 00 OTTS #4-40 U-2 TRS 2X OUTI OS OUTI OS 9-5 OTTS.096 I. ±.003 (2.44 ± 0.08) 00 OTTS.25 I. ±.003 (3.8± 0.08) Table II: imensions TR SIZS 9-5 OTTS #2-56 U 00 OTTS #4-40 U OIURTIO OR 3-00 OTTS ax. ax. ax. ax. ax. ax. ax. ayout In. In. ±.003 ± 0.08 In. In. In. In. ±.003 ± 0.08 In. In. In. ±.00 ±0.25 ±.00 ±0.25 In. In S S S S S S S S IX icro- I-T lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

239 icro- I-T-8353 I-T-8353/0 Thru /5 icro- R ondensed Right ngle Terminated IX.00 (2.54).083 (2.).00 (2.54) 8353/0 Thru /2 onnector ayouts in onnectors atterns shown are for connector mounting side of board. 9 Thru 5 ontacts.096 (2.44) iameter ounting oles, 00 in.25 (3.8) iameter.00 (2.54).58 (4.0).083 (2.).00 (2.54).00 (2.54).00 (2.54).08 (2.74).00 (2.54) TY (0.5) I 8353/0-5 I 8353/ (2.54)TY.250 (6.35) (.27)TY (.27)TY.865 (2.97) OTOR (6.35).020 (0.5).00 (2.54).083 (2.).00 (2.54) 2 I 8353/0-25 I 8353/0-6 OTOR (ROT) (4.35) (.27)TY.5 (28.32) OTOR (2.54).020 (0.5).00 (2.54) 3 I 8353/0-37 I 8353/0- ROT O OTOR (.27)TY.25 (30.86) (7.62).050 (.27) (6.35).83 (4.65).050 (.27)TY.00 (2.54) TY.00 (2.54).275 (6.99) 5 I 8353/- 00 I 8353/ (2.54).08 (2.74).00 (2.54) (.27)TY.965 (24.5) OTOR (.27)TY.265 (32.3).025 (0.64) (8.6) (.27)TY.800 (45.72) OTOR (ROT) OTOR (6.35) OTOR (6.35) (0.5) (0.5).250 (6.35).020 (0.5).400 (0.6) 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

240 8353/3 TRU /5 connector ayouts Socket onnectors atterns shown are for connector mounting side of board. 9 Thru 5 ontacts.096 (2.44) iameter ounting oles, 00 in.25 (3.8) iameter.00 (2.54).083 (2.).083 (2.).00 (2.54).020 (0.5) 5.00 (2.54)TY.250 (6.35) (.27)TY 9 SOT 8353/3-5 SOT 8353/ (.27)TY.865 (2.97) OTOR (4.35) OTOR.00 (2.54) (4.0).00 (2.54) SOT 8353/3-25 SOT 8353/ (.27)TY.5 (28.32) OTOR.00 (2.54) (2.54).08 (2.74).00 (2.54) TY I-T-8353/0 Thru /5 icro- R ondensed Right ngle Terminated SOT 8353/3-37 SOT 8353/ (.27)TY ROT O OTOR (30.86) (6.35) (0.5).300 (7.62).050 (.27) (6.35).083 (2.).00 (2.54).020 (0.5).050 (.27)TY.00 (2.54) TY.00 (2.54).00 (2.54).025 (0.64) 5 SOT 8353/4-00 SOT 8353/ (.27)TY.965 (24.5) (45.72) OTOR.00 (2.54) (4.65).00 (2.54).275 (6.99).00 (2.54).08 (2.74).00 (2.54) (8.6) (.27)TY.265 (32.3) OTOR (ROT) (.27)TY OTOR OTOR (6.35) (0.5) (6.35) (0.5).400 (0.6) (6.35).020 (0.5).275 (6.99) IX icro- I-T lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

241 icro- I-T-8353 I-T-8353/6 Thru /2 icro- R Right ngle Terminated onnector igh erformance These connectors feature gold-plated Twistin contacts for best performance. tails are.020 inch diameter. Specify nickel-plated shells or cadmium plated shells for best availability. Solder-ipped Terminals are coated with Sn60/b40 tin-lead solder for best solderability. Table I: ardware Options T or U W or Y TRU O ow To Order I-T 8353 Right ngle icro- onnectors Sample art umber m8353/ 9-02 n ase art umber Slash umber- Shell Sizes Tail ength Shell inish ardware Options 8353 lug (in ontacts) Receptacle (Socket ontacts 6-9 ontacts 9-9 ontacts 6-5 ontacts 9-5 ontacts 6-2 ontacts 9-2 ontacts 6-25 ontacts 9-25 ontacts 6-3 ontacts 9-3 ontacts 6-37 ontacts 9-37 ontacts 7-5 ontacts 20-5 ontacts 8-00 ontacts 2-00 ontacts Inch (2.77 mm) Inch (3.56 mm) Inch (4.37 mm) Tail ength ±.05 (0.38) - admium - lectrodeposited luminum - lectroless ickel - Zinc ickel - assivated SST T - ickel luorocarbon olymer - o ackpost - ackposts Installed Sizes 9-5 T - Threaded Insert in oard ount ole (o ackposts) W - Threaded Insert in oard ount ole and jackposts Installed Shell Size 00 () U - #4-40 Threaded Insert Y - #4-40 Threaded Insert & ackpost (See Table I) TRU O TR ISRT TR ISRT o ackpost ackpost Threaded Insert ackpost, Threaded Insert IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

242 ayout In. I-T-8353/6 Thru /2 icro- R Right ngle Terminated onnector Table II: imensions ax. ax. ax. ax. ax. In. ±.005 ± (0.5) ±.002 (0.) 2 X T OS 9-5 OTTS.096 ±.005 (2.43 ± 0.3) 00 OTTS.25 ±.005 (23.8 ± 0.3) In. In. In. In. ±.007 ± S S S S S S S S In. In. ±.003 Tail ength TR SIZS 9-5 OTTS #2-56 U 00 OTTS #4-40 U ±0.08 In. ±.05 ±0.38 In. ±.00 ±0.25 IX icro- I-T lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

243 icro- I-T-8353 I-T-8353/6 Thru /2 icro- R Right ngle Terminated onnector 8353/6 Thru /8 ayouts in onnectors atterns shown are for connector mounting side of board. 9 Thru 5 ontacts.096 (2.44) iameter ounting oles, 00 in.25 (3.8) iameter.25 (3.8).50 (3.8).25 (3.8).50 (3.8).00 (2.54).25 (3.8).00 (2.54).50 (3.8).00 (2.54).050 (.27).00 (2.54) (29.2) 9 I 8353/6-25 I 8353/ (.27).00 (2.54) (7.62).300 (33.02) 5 I 8353/6-3 I 8353/ (36.83) 2 I 8353/6-37 I 8353/6-.50 (.27) OTOR.375 (9.53) OTOR.050 (.27).00 (2.54) (5.72).25 (3.8) OTOR.50 (3.8).225 (5.72).050 (.27).00 (2.54).25 (3.8) 5 I 8353/ (.27).00 (2.54).25 (3.8).25 (3.8).50 (3.8).50 (3.8).00 (2.54).50 (3.8).00 (2.54) X.00 (2.54).600 (40.64) OTOR.050 (.27) OTOR X.00 (2.54).050 (.27) (2.54).75 (4.45).550 (39.37).800 (45.72) OTOR.050 (.27).00 (2.54) OTOR.050 (.27).00 (.254) (53.34).50 (3.8) OTOR.050 (.27).00 (2.54) (3.8) IX (63.5) 00 I 8353/8-203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

244 8353/9 Thru /2 ayouts Socket onnectors atterns shown are for connector mounting side of board. 9 Thru 5 ontacts.096 (2.44) iameter ounting oles, 00 in.25 (3.8) iameter.25 (3.8).50 (3.8).25 (3.8) I-T-8353/6 Thru /2 icro- R Right ngle Terminated onnector 9 SOT 8353/9-25 SOT 8353/ (.27).00 (2.54).50 (3.8) (3.8).00 (2.54).00 (2.54).50 (3.8).00 (2.54).050 (.27).00 (2.54) (29.2) (7.62).300 (33.02) 5 SOT 8353/9-3 SOT 8353/9-2 SOT 8353/9-37 SOT 8353/9-.50 (3.8) 3X.00 (2.54) OTOR.225 (5.72) OTOR.050 (.27).00 (2.54) (36.83) OTOR.375 (9.525).225 (6.45).25 (3.8).50 (3.8).25 (3.8).50 (3.8) 5 SOT 8353/ (.27).00 (2.54) (63.5).25 (3.8).50 (3.8).50 (3.8).00 (2.54).00 (2.54).050 (.27).00 (2.54).25 (3.8) OTOR SOT 8353/2-.00 (2.54).050 (.27) OTOR.050 (.27).00 (2.54) (39.37).75 OTOR.050 (.27).00 (2.54) (45.72) OTOR.50 (3.8).050 (.27).00 (2.54) OTOR X.00 (2.54) (40.64).050 (.27) 2.00 (53.34).50 (3.8) IX icro- I-T lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

245 icro- I-T-8353 I-T-8353/22 Thru /27 icro- S Straight Terminated onnector igh erformance These connectors feature goldplated Twistin contacts for best performance. tails are.020 inch diameter. Specify nickel-plated shells or cadmium plated shells for best availability. Solder-ipped Terminals are coated with Sn60/b40 tin-lead solder for best solderability. ow To Order I-T-8353 Straight icro- onnectors Sample art umber m8353/ /26-03 c w ase art umber Slash umber- Shell Sizes Tail ength Shell inish ardware Options Thru ole 8353 lug (in ontacts) Receptacle (Socket ontacts) 22 9 ontacts 25 9 ontacts 22 5 ontacts 25 5 ontacts 22 2 ontacts 25 2 ontacts ontacts ontacts 22 3 ontacts 25 3 ontacts ontacts ontacts 23 5 ontacts 26 5 ontacts ontacts ontacts (See Table I) Inch (2.77 mm) Tail ength Inch (3.56 mm) ±.05 (0.38) Inch (4.37 mm) - admium - lectrodeposited luminum - lectroless ickel -Zinc ickel - assivated SST T - ickel luorocarbon olymer - o ackpost - ackposts Installed Sizes 9-5 T - Threaded Insert in oard ount ole (o ackposts) W - Threaded Insert in oard ount ole and jackposts Installed Shell Size 00 () U - #4-40 Threaded Insert Y - #4-40 Threaded Insert & ackpost (See Table I) Table I: ardware options T or U W or Y Thru ole Threaded Insert Threaded Insert IX o ackpost ackpost Threaded Insert ackpost, Threaded Insert 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

246 ayout In. I-T-8353/22 Thru /27 icro- S Straight Terminated onnector Table II: imensions ax. ax. ax. ax. ax. 2 X T OS 9-5 OTTS.096 ±.005 (2.43 ± 0.3) 00 OTTS.25 ±.005 (23.8 ± 0.3) In. ±.003 ± ±.002 (0.5± 0.05) In. In. In. In. ±.004 ±0.0 TR SIZS 9-5 OTTS #2-56 U 00 OTTS #4-40 U In. ±.00 TI ±.005 (0.3) S S S S S S S S ±0.25 In. ±.007 ±0.8 In. In. ±.00 ±0.25 IX icro- I-T lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

247 icro- I-T-8353 I-T-8353/22 Thru /27 icro- S Straight Terminated onnector IX.050 (.27).00 (2.54) TY.050 (.27) (.27) (29.2) (29.2) (2.54).225 (5.72) TY (36.8) (2.54) TY.050 (.27) TY.375 (9.53).00 (2.54) TY.050 (.27) TY (2.54) TY.050 (.27) TY (2.54).225 (5.72) TY onnector Orientation.050 (.27) /22 Thru /24 ayouts in onnectors atterns shown are for connector mounting side of board. 9 Thru 5 ontacts.096 (2.44) iameter ounting oles, 00 in.25 (3.8) iameter.00 (2.54) TY (.27) (2.54) TY (.27) (2.54) TY (.27) (45.72) (38.0).00 (2.54) TY.050 (.27) TY (3.8).00 (2.54) TY.050 (.27) TY (2.54).50 (3.8) TY (53.34) (50.80) (2.54) TY (.27) TY (2.54).50 (3.8) TY (2.54) TY.050 (.27) TY (3.8) 9 I 8353/22-5 I 8353/22-5 I 8353/22-3 I 8353/22-2 I 8353/22-25 I 8353/ in # 2.800(7.2 ) (2.54) TY.050 (.27) TY (3.8) I 8353/24-37 I 8353/ lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

248 .050 (.27).00 (2.54) TY.050 (.27) Socket #.050 (.27) 9.50 (29.2) (29.2) (2.54).225 (5.72) TY (36.8).00 (2.54) TY.050 (.27) TY.375 (9.53).00 (2.54) TY.050 (.27) TY 8.00 (2.54) TY.050 (.27) TY (2.54).225 (5.72) TY.050 (.27) I-T-8353/22 Thru /27 icro- S Straight Terminated onnector onnector Orientation 8353/25 Thru /27 ayouts Socket onnectors atterns shown are for connector mounting side of board. 9 Thru 5 ontacts.096 (2.44) iameter ounting oles, 00 in.25 (3.8) iameter.050 (.27) (2.54) TY (.27) (.27).800 (45.72).500 (38.0) (2.54) TY.050 (.27) TY (2.54).50 (3.8) TY.00 (2.54) TY.050 (.27) TY (2.54).50 (3.8) TY 2.00 (53.34) (50.80).00 (2.54) TY.050 (.27) TY (2.54).50 (3.8) TY.00 (2.54) TY.050 (.27) TY (3.8) 9 SOT 8353/25-5 SOT 8353/26-5 SOT 8353/25-3 SOT 8353/25-2 SOT 8353/25-25 SOT 8353/ (2.54) TY 2.800(7.2 ).00 (2.54) TY.050 (.27) TY.50 (3.8) SOT 8353/27-37 SOT 8353/25- IX icro- I-T lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

249 icro- I-T-8353 I-T-8353/28 Thru /33 icro- S ondensed Straight Terminated onnectors IX Space-Saving These connectors take up less room on the board. tail spacing is.075 inch (.9mm) between rows. Threaded Inserts Stainless steel inserts are insert molded into plastic trays. These inserts provide a ground path from the board to the mating cable. Solder-ipped Terminals are coated with Sn60/b40 tin-lead solder for best solderability. ow To Order Straight icro- onnectors Sample art umber m8353/ 33-h 0 c p ase art umber 8353/ lug (in ontacts) Receptacle (Socket ontacts) 28-9 ontacts 28-3 ontacts 3-9 ontacts 3-3 ontacts Slash umber ontacts ontacts 3-5 ontacts 3-37 ontacts Shell Sizes 28-2 ontacts 29-5 ontacts 3-2 ontacts 32-5 ontacts ontacts ontacts 3-25 ontacts ontacts Tail ength Shell inish ardware Options RWR OTIO O OST, O TR ISRT T O I. 9-5 OTTS.096/.088 (2.44/2.24) 00 OTTS.28/.22 (3.25/3.0) (See Table II) Inch (2.77 mm) Inch (3.56 mm) Inch (4.37 mm) Tail ength ±.05 (0.38) - admium - lectrodeposited luminum - lectroless ickel - Zinc ickel - assivated SST T - ickel luorocarbon olymer - o ackpost - ackposts Installed Sizes 9-5 Shell Size 00 () T - Threaded Insert in oard ount ole (o ackposts) U - #4-40 Threaded Insert W - Threaded Insert in oard ount ole and ackposts Installed Y - #4-40 Threaded Insert & ackpost (See Table I) RWR OTIOS T or U TR ISRT, O OST TR SIZ 9-5 OTTS # 2-56 U-2 00 OTTS # 4-40 U-2 Table I: ardware Options RWR OTIO OST TRU-O OR TR SIZ 9-5 OTTS # 2-56 U 00 OTTS # 4-40 U US WIT.56 (3.96) X. OR TISS RWR OTIOS W or Y OST TR ISRT.60 (4.) I. (9-5 IS).225 (5.7) I. (00 I) TR SIZ 9-5 OTTS #2-56 U 00 OTTS #4-40 U 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

250 ayout I-T-8353/28 Thru /33 icro- S ondensed Straight Terminated onnectors In. Table III: imensions ax. ax. ax. ax. ax. In. ±.005 ± (0.6) In. In. In. TI T ±.05 (0.38) In. ±.003 ± 0.08 Ø.020 (0.5) ±.002 (0.05) S S S S S S S S In. IX icro- I-T lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

251 icro- I-T-8353 I-T-8353/28 Thru /33 icro- S ondensed Straight Terminated onnectors IX.00 (2.54) TY TY.050 (.27) TY.025 (0.64) TY.83(4.65) TY.038 (0.96) R.00 (2.54) TY TY.050 (.27) TY.025 (0.64) TY.83(4.65) TY.038 (0.96) R.00 (2.54) TY TY.050 (.27) TY.025 (0.64) TY.83(4.65) TY.038 (0.96) R.2325 (5.9) TY 8353/28 Thru 30 ayouts in onnectors (5.08).565 (4.35) atterns shown are for connector mounting side of board..225(5.72).096 (2.44) I TY.83(4.65) TY.00 (2.54) TY TY.050 (.27) TY.025 (0.64) TY.038 (0.96) R 9 I 8353/28-5 I 8353/28-2 I 8353/28-25 I 8353/ TY.0375 (0.95) TY (9.05) R.5 (28.32) (2.7) R (5.72).096 (2.44) I TY 3 I 8353/28-37 I 8353/ (2.44) I TY (9.05) 8.25 (30.86) (5.72) onnector Orientation.096 (2.44) I TY.00 (2.54) TY TY.050 (.27) TY.025 (0.64) TY.83(4.65) TY.25 (3.8) I TY.038 (0.96) R in #.00 (2.54) TY TY.050 (.27) TY.025 (0.64) TY.83(4.65) TY.038 (0.96) R 5 I 8353/29-00 I 8353/ (8.89) R.75 (8.6) (45.72) (0.95) TY TY.225 (5.72) (5.24) R (24.5) (22.86) R.265 (32.3) (2.44) I TY (5.72).096 (2.44) I TY.225 (5.72).096 (2.44) I TY.875 (4.76).282 (7.4) 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

252 I-T-8353/28 Thru /33 icro- S ondensed Straight Terminated onnectors.00 (2.54) TY TY.050 (.27) TY.025 (0.64) TY.83(4.65) TY.038 (0.96) R.00 (2.54) TY TY.050 (.27) TY.025 (0.64) TY.83(4.65) TY.038 (0.96) R.00 (2.54) TY TY.050 (.27) TY.025 (0.64) TY.83(4.65) TY.038 (0.96) R.2325 (5.9) TY 8353/3 Thru /33 ayouts Socket onnectors (5.08).565 (4.35).225(5.72).096 (2.44) I TY onnector Orientation 9 Socket 8353/3-5 Socket 8353/ (2.7) R (2.54) TY TY.050 (.27) TY.025 (0.64) TY.83(4.65) TY.225 (5.72) (0.96) R (2.44) I TY.600(5.24) R.965 (24.5) 2 Socket 8353/3-25 Socket 8353/ TY.0375 (0.95) TY (9.05) R.5 (28.32) atterns shown are for connector mounting side of board (5.72).096 (2.44) I TY.00 (2.54) TY TY.050 (.27) TY.025 (0.64) TY.83(4.65) TY.038 (0.96) R 3 Socket 8353/3-37 Socket 8353/ (2.44) I TY (9.05).25 (30.86) Socket #.83(4.65) TY.25 (3.8) I TY.00 (2.54) TY TY.050 (.27) TY.025 (0.64) TY.038 (0.96) R 5 Socket 8353/32-00 Socket 8353/ (22.86) R (8.89) R.75 (8.6).265 (32.3).800 (45.72).225 (5.72) (2.44) I TY.225 (5.72).096 (2.44) I TY (0.95) TY TY.225 (5.72).096 (2.44) I TY.875 (4.76).282 (7.4) IX icro- I-T lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

253 icro- I-T-8353 I-T-8353/05 icro- ardware ackscrews and ackposts Order One it er onnector. ackpost kits contain two posts, two hex nuts and 2 lockwashers. ackscrew kits contain 2 screws and 2 e-rings. I Spec ardware its feature 300 series stainless steel. onfiguration ackpost onnector Size, Thread Size Sizes 9 to 69 ontacts. il Spec Size to #2-56 U il Spec Size #4-40 U Sizes 9 to 69 ontacts. il Spec Size to #2-56 U-2 il Spec art umber I Spec ackscrew its lenair art umber 8353/ / /.85 (4.8 / 4.7).25 (3.2) X.086 (2.2)-56 U-2.85/.75 (4.7 / 4.4).87 (4.7) X.2 (2.8)-40 U (.57) X 8353/ (3.8) I.03 (2.62) X imensions.083 (2.) I.490 /.460 (2.4 /.7).490 /.460 (2.4 /.7).086 (2.2)-56 U-2.2 (2.8)-40 U-2 #2-56 U (2.29) I RT T.258 (6.55) X ex ead ackscrew ow rofile Slot ead ackscrew ow rofile il Spec Size #4-40 U-2 Sizes 9 to 69 ontacts. il Spec Size to #2-56 U il Spec Size #4-40 U-2 Sizes 9 to 69 ontacts. il Spec Size to #2-56 U / (.57) X.87 (4.75) I 8353/ (3.8) I 8353/ / (3.56) I.098 (2.49).292 (7.4) X.03 (2.62) X.258 (6.55) X.87 (4.75) I.56 (3.96) I X.098 (2.49).083 (2.) I.40 (3.56) I.062 (.57) X.60 (5.49) X #4-40 U 2.0 (2.79) I RT T #2-56 U (2.29) I RT T #4-40 U 2.0 (2.79) I RT T.292 (7.4) X.083 (2.) I #2-56 U (2.29) I RT T.258 (6.55) X IX ex ead ackscrew xtended Slot ead ackscrew xtended il Spec Size #4-40 U-2 Sizes 9 to 69 ontacts. il Spec Size to #2-56 U il Spec Size #4-40 U / / / (5.08) I X.56 (3.96) I X.200 (5.08) I X.062 (.57) X.60 (5.49) X.60 (5.49) X.60 (5.49) X.40 (3.56) I.083 (2.) I.40 (3.56) I #4-40 U 2.0 (2.79) I RT T.292 (7.4) X #2-56 U (2.29) I RT T.258 (6.55) X #4-40 U 2.0 (2.79) I RT T.292 (7.4) X 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

254 Section icro- ackshells icro- ackshells Round able ntry ackshell age -6 Round able ntry, Split Shell anding ackshell age -9 Round able ntry Shield Sock age -0 omposite Round able ntry age -2 lliptical ntry age -4 lliptical Split anding ackshell age -2 Strain Relief age -23 otting Shell age -26 roduct Selection uide I/RI Round able ntry ackshells One piece aluminum icro- backshells. Terminate cable shields with andaster TS stainless steel straps. inish the cable with heat-shrink tubing or boots, sold separately. Stocked in top, side, 45, dual 45 and dual top entry. I-T-8353 version also available. Split I/RI icro- ackshell with and Screwlocks This backshell features screwlocks, allowing the connectors to be fully mated before the hardware is fastened. I/RI icro- ackshells With raid ttached These backshells are terminated to tinned copper braid. Round ntry Split I/RI icro- ackshell and Screwlocks This backshell features screwlocks, allowing the connectors to be fully mated before the hardware is fastened. lliptical ntry I/RI icro- ackshells Our elliptical backshells accomodate larger wire bundles. See the table on page -5 for more information. lliptical I/RI Split Shell icro- ackshell This backshell features screwlocks, allowing the connectors to be fully mated before the hardware is fastened. Strain Relief ackshells (not for I) These backshells are used for wire or cable strain relief. Three styles are provided. otting Shell (not for I) otting shells are attached to the connector and filled with epoxy or similar encapsulants to provide environmental protection and strain relief. IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

255 icro- ackshells icro- ackshells eneral Information and roduct Selection uide IX I backshell vailable in ightweight omposite icro- ackshell Selection uide ackshell Type able ntry ardware Other Strain Relief ackshell otting Shell Switching Shell ircular able ntry lliptical able ntry Straight able ntry 45º able ntry Side able ntry Slot ead ackscrews ex ead ackscrews xtended ackscrews () () () () (2) (2) (3) () xtended jackscrew will not work with 45 cable entry or with dual 45 entry backshells. (2) Sizes 9 thru 69 use e-rings or c-clips for connector attachment, 00 pin uses c-clip only. (3) The cable entry is on the long side of shell. See ordering information for clarification. lenair wik onnections One iece ackshell Screw ocks Instead of ackscrews age umber Split (Two iece) ackshell ccepts Standard Shield and ccepts icro Shield and onnector ttaches with lip onnector ttaches with -Ring Same ay Stock* ightest Weight ccepts Standard Width Shield and eets S Outgassing ow Residual agnetism Oversize lliptical able ntry Split ackshell With Screwlocks for ast ating *vailability: ll sizes in stock. ost sizes in stock. few sizes in stock. ot Stocked. onnector is aptivated by ackshell lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

256 icro- ackshells eneral Information and Reference ata icro- ackshells bout icro- ackshells icro- I backshells connect cable shields to icro- connectors, providing strain relief and mechanical protection. These backshells are made out of aluminum alloy. lectroless nickel is the most widely used finish. These backshells are compatible with industry- standard metal shell 8353 type connectors. The following application notes explain how to select the right type of backshell. I Versus on-i ackshells Select I backshells if your cable has a braided copper shield. The cable shield is secured to the backshell with a andaster TS strap, supplied with the backshell or purchased separately. Select a strain relief backshell if your connector has individual wires or if your wire bundle does not have a metal shield. I backshells do not normally require additional strain relief. icro- wires are typically potted, and the shield braid is a sufficient strain relief. n optional ty-wrap leg is available if necessary. dd "S" to the end of the part number. Standard and Versus icro and ost icro- I backshells feature low profile band platforms designed for narrow (.25" width) micro band. Some have a taller band platform which also accepts standard bands (.250" width). lease refer to the "ackshell Selection uide" on the preceding page to identify which backshells are compatible with both the standard band and the micro band. One iece ackshell Versus Split ackshell Use one piece backshells if in stock availability is important. Split backshells allow installation after the other end of the cable has been terminated. Some split backshells fit over the connector, eliminating the highly magnetic clip. Split versions also can accommodate screw locks. lliptical Versus ircular able ntry hoose elliptical backshells if the wire bundle diameter is too big to fit in a circular cable entry. arge icro- connectors (5 pins and up) usually exceed the limits of the round entries. Refer to the cable entry and wire bundle tables in this section to find out if an elliptical entry is necessary. The actual size illustrations to the right show the difference between round and elliptical cable entries. The round entry circular mil area = (½) 2 =. In. 2. The formula for the area of an ellipse is (ength)(width) 4 =.36 In. 2 and latform or I Shield wik-ty Option dd "S" to art umber icro and latform.32 (8) Strain Relief lamp Standard and latform.44 () ackscrews and Screwlocks ackscrews are fixed in position and must be turned in order to mate the connectors together. Screwlocks float and allow the connectors to be coupled before the screwlocks are engaged. Screwlocks allow faster mating, while jackscrews offer less risk of contact damage. Round able ntry 00 in.375 Inch (9.5 ) iameter lliptical able ntry 00 in.360 y.29 Inch (9. X 32.8 ) IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

257 icro- ackshells icro- ackshells eneral Information and Reference ata IX ast, ost-ffective Shield Termination ttach cable braid shields to I backshells with andaster TS stainless steel straps. The and-aster TS system offers fast termination and the flexibility to handle different diameters with the same band. The aerospace industry has adopted this system for every type of application where reliability and durability are essential. IORTT OT: WYS OU-WR S! ontact lenair or visit our website ( to view our complete line of andaster TS products, including pneumatic tools for high production and calibration kits. Step One able rep ay individual shields over the band platform. ull overall braid shield over the band platform so that all braid strands will be captured by the band. andaster TS Shield Termination System The ew andaster TS icro and Tool art umber without counter art umber 60-0 with counter Weight:.8 lbs. See our full offering of and-aster TS tools and accessories at edium icro and 8.0 Inches (203.2 ) part number standard or 60-06re-coiled up to.88 Inches (22.4 ) iameter ong icro and 4.0 inches (355.6 ) part umber standard or pre-coiled up to.88 Inches (47 mm) diameter Step Two Install and Wrap the band through the buckle twice. Insert the working end into the banding tool in the direction shown on the tool. Squeeze the short grey handle to insert the band. Slide the band onto the cable. lose the blue handle repeatedly until the handle no longer opens. lose the long grey handle until the tool cuts the band. Remove the excess strap from the tool by closing the small grey handle. *Visit the lenair Website for video demonstrations of banding termination at Step Three Trim raid It's a snap! ust trim the excess braid and you're done. 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

258 icro- ackshells icro- ackshell Wire undle Sizing hart and aterial and inish Options icro- ackshells aximum iscrete Wire undle iameters (See ote ) o. Of Wires Wire auge 22759/ 22759/33 Wire undle Recommended ackshell iameter able ntry ode Wire undle iameter Recommended ackshell able ntry ode 9 # (3.90) (3.40) 05 9 # (3.50) (2.90) 05 9 # (3.00) (2.50) 04 5 # (5.00) (4.30) 06 5 # (4.40) (3.80) 06 5 # (3.90) (3.20) 05 2 # (5.90) (5.0) 07 2 # (5.30) (4.50) 07 2 # (4.60) (3.80) # (6.50) * (5.60) # (5.70) (4.90) # (5.00) (4.20) 06 3 # (7.20) * (6.20) 09 3 # (6.40) (5.40) 08 3 # (5.60) (4.60) # (7.90) * (6.80) * 37 # (7.00) * (5.90) # (6.0) (5.0) 08 5 # (9.20) * 0.35 (8.00) * 5 # (8.20) * (7. 0) 0 5 # (7.20) * (5.90) # (2.9) * 0.44(.2) * 00 # (.5) * (9.80) * 00 # (0.) * (8.30) * *lenair recommends elliptical style backshell OTS:. This sizing chart is for discrete wire bundles of the type and gauge indicated. When using twisted pairs, or other wire types/configurations, refer to lenair ircular onnector ackshells & ccessories catalog, page 8, alculating Wire undle iameter. lenair recommends 70% area fill (wire bundle area to entry port area), not to exceed 80% area fill on icro- ackshells. 2. When solder-cup icro- connectors and low-profile backshells (short in height) are used in conjunction, the transition angle from the outer pins to the centralized entry port becomes severe and can increase the susceptibility to damage. lenair recommends elliptical shaped entries to minimize angles of contact that can occur with round cable entries. 3. lending and deburring/smoothing of internal geometry may not produce perfectly smooth, rounded features, but has a proven history of success in precluding wire abrasion damage. or additional wire protection, wrap wire bundle with apton tape in areas that may come into contact with cable entry transitions or other interior angles. 4. lenair recommends that harness designs avoid excessive fill percentages and severe contact angles as previously described. or applications where these conditions must exist, consult our factory for appropriate additional design / workmanship solutions Shell, Saddle lamps lips, -Rings ackscrews, Washers, ackposts inish Options inish ode escription Specification orresponding onnector inish ode lack nodize I Type II lass 2 ode 4 hem ilm I--554 lass 3 ode 6 admium late Over lectroless ickel with Yellow hromate onversion oating S-S---46 Type II lass 3 ode lectroless ickel S-S lass 3 ode 2 Olive rab admium late Over lectroless ickel (000 our orrosion Rated) aterials S-S---46 luminum lloy 606 -T6 er --200, (achined omponents) luminum lloy 606-T6 er --59 (380) (ie-ast omponents) 7-7 Stainless Steel 300 Series Stainless Steel, assivated (Special order) X lectroless ickel (omposite Only) S-S lass 3 ode 2 Z2 old lated ST 488 ode 5 IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

259 icro- ackshells I/RI icro- anding ackshell Round able ntry IX ow To Order I/RI ackshells lenair s ost opular icro- ackshell is stocked in all sizes. hoose straight, side or 45 cable entry. Rugged One-iece luminum shell with stainless steel hardware, available in standard nickel plating, or choose optional finishes. 7-7 Stainless Steel lips attach the backshell to the connector. These backshells accept standard and micro andaster TS shield termination straps. Sample art umber 500T Series Shell inish 500T00 - Top ntry 500S00 - Side ntry ntry ual 45 (See Table III) - admium late/right ip - admium late/olive rab - admium late/olive rab, Type II lass - old Iridite Over admium; late Over ickel - lectroless ickel - admium late/olive rab; Over ickel - ad/o.. Over lectroless; ickel (000 our Salt Spray) T - admium late/right ip Over ickel Z2 - old late Z - assivate, Stainless;Steel aterial Shell Size 09, 5, 2, 25, 3, 37, 5, 5-2, 67, 69, 00 (See Table III) - (2) illister ead ackscrew - (2) ale xtended (Style T and S Only) - (2) ale illister ead - (2) ackpost, emale ardware Option - (2) ex ead ackscrew - () emale ackpost, () ale ilister ead - (2) ale ex - () emale ackpost, () ale ex Socket (2) xtended ackscrew - o ardware able ntry ode (3.2) (4.0) (4.8) (5.6) (6.4) (7.) (7.9) (8.7) (9.5) (See Table I) Omit (eave lank) - and ot Included Standard and -.250" Wide I and Strap Option Use the following codes to order band strap with - Uncoiled and Included - oiled and Included the connector. or best availability, order band icro and -.25" Wide separately. - Uncoiled and Included - oiled and Included Table I: aximum able ntry ode Shell Size Style & T Style Style S Table II: aximum able ntry imensions able Size In. ±.05 ±.05 ± 0.38 R ia. ax In otes. ssembly identified with manufacturer's name and /. 5-2 shell size is for a special 5 position 2 row icro connector 2. nurled or ribbed banding platform - manufactures option 3. I gasket mounts between mating connector and panel aterials/inish Shell: luminum lloy 606 -T6 er --200, (achined omponents) luminum lloy 606-T6 er --59 (380) (ie-ast omponents) lips, -Rings: 7-7 Stainless Steel ackscrews, Washers, ackposts: 300 Series Stainless Steel, assivated 204 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode Rev rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

260 I/RI icro- anding ackshell Round able ntry icro- ackshells Typ.04 in Size Style T - Top ntry R ax Typ.06(.5) onnector Shown or Reference Only Style S - Side ntry I asket Option ( ) See ote 4.44(.2).75 (4.4) Optional onfiguration See ote 3 Table III: imensions vailable for Style T and S Only ode xtended ackscrew ode xtended ackscrew ode loating xtended ackscrew Style - 45 ntry Style - 45 ual ntry onfiguration fr Option.88(4.8) ode emale ackpost ax. ax. ax. ax. ax ax ax. ax. ax. ax. ax. In. In. In. In. In. In. In. In. In. In. In. In. In (9.9) onfiguration fr Option ode ode ode ex Socket ackscrew ode S wik-ty IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

261 icro- ackshells I/RI ual ntry anding ackshell Round able ntry IX ual able ntry I backshell allows attachment of two separate wire bundles to the same icro- connector. This backshell accepts both standard and micro shield termination straps. ow To Order I/RI ual ntry ackshell.75 (4.4) OTOR ORR SRTY Table I: imensions #2-56 U TS I #4-40 U TS. 00 I.44 (.) O IISTR SRW O X SRW O OST O XT SRW Size ax. ax. ax. ax. ax. In. In. In. In. In. In. In. In aterials Shell: luminum lloy 606 -T6 lips: 7-7 Stainless Steel ardware: 300 Series Stainless Steel Sample art umber Series hem ilm (lodyne) admium, Yellow hromate Shell inish lectroless ickel admium, Olive rab Z2 old onnector Size 2, 25, 3, 37, 5, 5-2, 67, 69, 00 (See Table I) ardware Option I and Strap Option illister ead ackscrew ex ead ackscrew xtended ackscrew ackpost, emale Omit (eave lank) and ot Included Standard and (2 supplied).250" Wide icro and (2 supplied).25" Wide Rev lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

262 I/RI Split Shell anding ackshell with Screwlocks Round able ntry icro- ackshells Size Ø Split I ackshells allow installation on wired connector assemblies. aptive Screwlocks for fast connection. lug in the connector, then fasten the hardware. Table I: imensions aterials Shell: luminum lloy 606 -T6 lips: 7-7 Stainless Steel ardware: 300 Series Stainless Steel ow To Order I/RI Split anding ackshell Sample art umber m 25 h Series Shell inish hem ilm (lodyne) admium, Yellow hromate lectroless ickel admium, Olive rab Z2 old onnector Size 09, 5, 2, 25, 3, 37 5, 5-2, 67, 69, 00 (See Table I) ardware Option OIT or illister ead Screwlock ex ead Screwlock xtended Screwlock ackpost, emale I and Strap Option Omit (eave lank) and ot Included icro and Supplied oiled icro and Supplied ax. ax. ax. ax. ax. In. In. In. O IISTR SRW In. ± (8.) ± 0.25 O X SRWO O OST O XT SRWO In. In. In IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

263 icro- ackshells I/RI Shield Sock ackshell Round able ntry IX ow To Order Shield Sock I/RI ackshells Shield Sock ackshells save assembly time. These backshells are terminated to tinned copper braid in whatever length you require. vailable in Top, 45 and Side ntry, these backshells feature one piece construction and are available in a variety of plating finishes. recision Swaged raid Termination adds mechanical strength and lowers resistance compared to hex crimps. Sample art umber 500T0 m 25 h 08-2 Series 500T0 - Top ntry 500S0 - Side ntry ntry (See Table I) Shell inesh hem ilm (lodyne) admium, Yellow hromate lectroless ickel admium, Olive rab Z2 old onnector Size 09, 5, 2, 25, 3, 37, 5, 5-2, 67, 69, 00 (See Table III) ardware Option - illister ead ackscrew - ex ead ackscrew - xtended ackscrew - ackpost, emale (See Table II) (3.2) (4.0) (4.8) (5.6) (6.4) (7.) (7.9) (8.7) (9.5) (See Table IV) able ntry ode ength of raid 500T0 Top ntry aximum able ntry iameter per Shell Size and Style Size T Top ntry 45 ntry S Side ntry ength in One Inch Increments - xample: 2 equals twelve inches. Table I: ntry Styles 500S0 Side ntry ntry aterial and inish Shell: luminum lloy 606 -T6 er --200, (achined omponents) luminum lloy 606-T6 er --59 (380) (ie-ast omponents) raid: Tinned opper raid er ST 33, #36 W Strands, 90% overage rimp Ring: opper, Tin lated lips, -Rings: 7-7 Stainless Steel ackscrews, Washers, ackposts: 300 Series Stainless Steel, assivated 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

264 500-0 I/RI Shield Sock ackshell Round able ntry icro- ackshells Table II: ardware Options - illister ead ackscrew - ex ead ackscrew - xtended ackscrew (ot for 45 ntry) - ackpost, emale Table III: imensions able ntry ode Size Table IV: able ntry ode In. ±.00 ± 0.25 In. ax (4.4) T - TO TRY SOW WIT IISTR SRW OTOR ORR SRTY #2-56 U TS I #4-40 U TS. 00 I.50 (2.7) X. - 45º TRY SOW WIT X SRW OTOR ORR SRTY S - SI TRY SOW WIT XT SRW OTOR ORR SRTY ax. ax. ax. ax. ax. ax. ax. ax. ax. In. In. In. In. In. In. In. In. In. In. In IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

265 icro- ackshells omposite I/RI anding ackshell Round able ntry - illister ead ackscrew 507T088 Top ntry - ex ead ackscrew Table II: ntry Styles 507S088 Side ntry Save Weight and liminate orrosion amage with composite icro- backshells. These round cable entry backshells are injectionmolded with high strength Ultem 2300 fiberglass-reinforced thermoplastic. hoose Top, Side or 45 able ntry. lectroless ickel lated for excellent I shielding effectiveness. ow To Order I/RI anding ackshells Sample art umber 507T088 xm 25 h 08 Series 507T088 - Top ntry 507S088 - Side ntry ntry (See Table II) Shell inish X - lectroless ickel onnector Size 09, 5, 2, 25, 3, 37 5, 00 (See Table III) ardware Option illister ead ackscrew ex ead ackscrew xtended ackscrew (ot vailable for 45 able ntry) - ackpost, emale (See Table I) able ntry ode (3.2) (4.0) (4.8) (5.6) (6.4) (7.) 0.32 (7.9).344 (8.7) (9.5) (See Table IV) aximum able ntry er ntry Style and Shell Size Selections Size T Top ntry 45 ntry S Side ntry Table I: ardware Option ntry - xtended ackscrew (ot for 45 ntry) - ackpost, emale aterials Shell: Ultem 2300 lips: 7-7 Stainless Steel ardware: 300 Series Stainless Steel IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

266 omposite I/RI anding ackshell Round able ntry icro- ackshells Table III: imensions.75 (4.4) T - TO TRY SOW WIT IISTR SRW OTOR ORR SRTY #2-56 U TS. 9-5 I #4-40 U TS. 00 I.32 (8.) - 45º TRY SOW WIT X SRW OST OTOR ORR SRTY able ntry ode Size Table IV: able ntry odes In. ±.00 ± 0.25 In S - SI TRY SOW WIT XT SRW OTOR ORR SRTY ax. ax. ax. ax. ax. ax. ax. ax. ax. In. In. In. In. In. In. In. In. In. In. In IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

267 icro- ackshells I/RI lliptical anding ackshell IX lliptical ackshells provide extra room for large wire bundles. This one piece version features an oversize shield termination area for both standard and micro andaster TS shield termination straps. ow To Order I/RI lliptical ackshells Table I: imensions aterials Shell: luminum lloy 606 -T6 lips: 7-7 Stainless Steel ardware: 300 Series Stainless Steel Sample art umber T Series hem ilm (lodyne) admium, Yellow hromate Shell inish lectroless ickel admium, Olive rab Z2 old onnector Size 09, 5, 2, 25, 3, 37 5, 5-2, 67, 69, 00 (See Table I) ardware Option I and Strap Option illister ead ackscrew ex ead ackscrew xtended ackscrew ackpost, emale (See Table I) Omit (eave lank) and ot Included Standard and.250" Wide, uncoiled icro and.25" Wide, uncoiled wik-ty Option T with wik-ty Omit for none RTII I TR - TY OTOR SOW OR RR OY SRW OIURTIO R OTIO Y TO SRW.75 ia ia Ref. Size Thread In. In. In. In. In. In. In. In U U U U U U U U U U-2 Rev lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. WI-TY SY T.30 ardware Option - illister ead ackscrew - ex ead ackscrew - xtended ackscrew - ackpost, emale IR, I. 2 IR WY, X ail: [email protected]

268 Straight, Top, and 45 ntry I/RI lliptical anding ackshell icro- ackshells 7-7 Stainless Steel lips attach the backshell to the connector. These backshells accept standard and micro andaster TS shield termination straps. Straight, 45 and Right ngle elliptical backshell provides plenty of working room for complicated wiring situations. Rugged One-iece luminum Shell with stainless steel hardware, available in standard nickel plating, or choose optional finishes. ow To Order I/RI lliptical ackshells Sample art umber m Series 507T75 - Top ntry 507S75 - Side ntry Side ntry (See Table I) hem ilm (lodyne) admium, Yellow hromate Shell inish lectroless ickel admium, Olive rab Z2 old onnector Size 09, 5, 2, 25, 3, 37 5, 5-2, 67, 69, 00 (See Table III) able ntry ode 0, 02, 03, 04, 05, 06, 07, 08 (See Table IV) ardware Option 507T75 Top ntry - illister ead ackscrew OIT (eave lank) illister ead ackscrew ex ead ackscrew xtended ackscrew - ackpost, emale (See Table II) Table I: ntry Styles 507S75 Side ntry - ex ead ackscrew ntry Table II: ardware Option - xtended ackscrew (ot for 45 ntry) aterials (See Ordering Info or inish Options) Shell: luminum lloy 606 -T6 er --200, (achined omponents) luminum lloy 606-T6 er --59 (380) (ie- ast omponents) lips: 7-7 Stainless Steel ackscrews, Washers, ackposts: 300 Series Stainless Steel, assivated - ackpost, emale IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

269 icro- ackshells Straight, Top, and 45 ntry I/RI lliptical anding ackshell able ntry ode Size.32 (8.).75 (4.4) Table IV: able ntry Sizes vailable In. In. on Shell ±.00 ± 0.25 ±.00 ± 0.25 Size Thru Thru Thru Thru Thru Thru and OTOR ORR SRTY #2-56 U TS I #4-40 U TS. 00 I Table III: imensions STR IISTR SRW O X SRW ax. ax. ax. ax. ax. ax. ax. In. In. In. In. In. In. In. In O OST O XT SRW IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

270 Side ntry I/RI ightweight etal ackshell I-T-8353 icro- ackshells I/RI ightweigth etal Shell onnectors provide rugged aluminum housing with stainless steel hardware, available in standard nickel plating, or choose optional finishes. Terminate cable shields with andaster TS micro bands. This backshell features floating male screwlocks which allow full mating of the connector before the screws are fastened. ow To Order I/RI ightweight ackshells Sample art umber m 25 d h l Series nd ntry Style (45) - admium late/right ip - admium late/olive rab - admium late/olive rab Type II lass - old Iridite Over admium late Over ickel inish ode - lectroless ickel - admium late/olive rab Over ickel - ad/o.. Over lectroless ickel (000 our Salt Spray) T - admium late/right ip Over ickel Z2 - old late Shell Size 09, 5, 2, 25, 3, 37, 5, 5-2, 67, 69, 75, 00 (See Table I) ax ntry ode Ø vailable Sizes Thru Thru Thru Thru 00 ax ntry ode Thru Thru Thru Thru Thru and ardware Option - illister ead ackscrew - Socket ead ackscrew - emale ackpost I and Strap Option Omit (lank) - o and - Uncoiled.25" Wide and - oiled.25" Wide and otes. ssembly Identified With anufacturer's 2. ame and /, Space ermitting. aterial/inish ackshell - al alloy / see Table 2 ardware - cres / passivated. See for straight & 90 configurations. IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

271 icro- ackshells I/RI ightweight etal ackshell I-T-8353 Table I: imensions ode Socket ead ackscrew ardware ounting Options ode illister ead ackscrew ode emale ackpost iameter.320 iameter (See ow To Order Table) ode ardware Shown IX 2-56 (Sizes 09-69) 4-40 (Size 00) Size onnector Shown or Reference Only ax ntry in mm in mm in mm in mm in mm in mm in mm in mm lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

272 I/RI lliptical ightweight etal ackshell I-T-8353 icro- ackshells I/RI lliptical ightweight etal Shell ackshells provides added room for larger wire bundles. Terminate cable shields with andaster TSmicrobands. This backshell features floating male screwlocks which allow full mating of the connector before the screws are fastened. Rugged luminum housing with stainless steel hardware, available in standard nickel plating, or choose optional finishes. ow To Order I/RI etal Shell ackshells Sample art umber 507T296 m 25 d h l Series 507T296 - Top ntry (Straight) 507S296 - Side ntry (90 ) - admium late/right ip - admium late/olive rab - admium late/olive rab Type II lass - old Iridite Over admium late Over ickel inish Symbol - lectroless ickel - admium late/olive rab Over ickel - ad/o.. Over lectroless ickel (000 our Salt Spray) T - admium late/right ip Over ickel Z2 - old late Shell Size 09, 5, 2, 25, 3, 37, 5, 5-2, 67, 69, 75, 00 (See Table I) ode vailable Sizes Thru Thru Thru Thru 00 ntry ode Thru Thru & 5-2 Thru Thru , 67 & ardware Option - illister ead ackscrew - Socket ead ackscrew - xtended ackscrew - emale ackpost I and Strap Option Omit (lank) - o and - Uncoiled.25" Wide and - oiled.25" Wide and otes. ssembly identified with manufacture's name and /, space permitting. 2. See for 45 configuration 3. Symbol '' extended hardware is not to be used with straight backshell at max cable entry size. aterial/inish ackshell - al alloy/see Table 2 ardware-cres/pasivated IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

273 icro- ackshells I/RI ightweight etal ackshell I-T-8353 IX Size ardware ounting Options ode illister ead ackscrew Style S Side ntry (90 ).320(8.3) ode illister ead ackscrew Table I: imensions ode emale ackpost.320 (8.28) onnector Shown onnector Shown 2-56 (Sizes 09-69) or Reference Only or Ref Only 4-40 (Size 00) Symbol ardware Shown in mm in mm in mm in mm in mm in mm ode ardware (See ote 3) Style T Top ntry (Straight) ax ntry 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

274 I/RI lliptical Split Shell anding ackshell icro- ackshells Split ackshell With lliptical able ntry provides added room for larger wire bundles. Terminate cable shields with andaster TS microbands. This backshell features floating male screwlocks which allow full mating of the connector before the screws are fastened. Rugged luminum housing with stainless steel hardware, available in standard nickel plating, or choose optional finishes. ow To Order I/RI Split Shell ackshells Sample art umber Series Shell inish hem ilm (lodyne) lectroless ickel Z2 old admium, Yellow hromate admium, Olive rab onnector Size 09, 5, 2, 25, 3, 37, 5, 5-2, 67, 69, 00 (See Table I) able ntry ode 04, 05, 06, 07, 08, 09, 0,, 2, 3, 4, 5, 6 (See Table II) I and Strap Option ardware Option OIT (eave lank) - and Strap ot Supplied - icroband Supplied ( ) - oiled icroband Supplied ( ) - illister ead Screwlock - illister ead ackscrew - ex ead Screwlock - ex ead ackscrew - xtended Screwlock - xtended ackscrew - ackpost, emale (See Table I) otes. ssembly Identified with manufacturer's name and / space permitting. 2. Use lenair ban and tool. 3. Screwlocks: screws float to allow connctor to engage completely before tightening. ackscrews: screws must be tightened simultaneous with connector engagement 4. Shell size 09 may be supplied with optional configuration dimension of.40 max. aterials/inish Shell: luminum lloy ackscrews, Washers, ackposts: 300 Series Stainless Steel, assivated See Ordering Info or inish Options IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

275 icro- ackshells I/RI lliptical Split Shell anding ackshell IX Size onnector Shown or Reference Only Optional onfiguration Shell Size 09 See ote 4 See ote 4 ode I and Strap See ote 2 Table I: imensions ax. ax. In. In. In. Thread Typ In. ± Ref ± 0.25 In. ± in ±.022 In. ±.005 ode Table II: able ntry ode In. ±.00 ± 0.25 vailable on Shell Size , 5, Thru Thru Thru Thru Thru Thru Thru Thru ,5-2,67,69, , 67, 69, , 67, 69, , 67, 69, 00 ±.27 Thread U-2 04 vailable ash o. Table III U U U U U U U U U U ode & - xtended ackscrew - xtended Screwlock ode ilister ead ackscrew ode emale ackpost ode ex Socket ead ackscrew ode ixed emale ackpost 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

276 Saddle ar Strain-Relief ackshell icro- ackshells Size Strain Relief ackshells feature saddle bar cable clamps for easy installation. ow To Order Saddle ar Strain Relief ackshells Sample art umber m 25 Series Shell inish hem ilm (lodyne) lectroless ickel Z2 old.03 (0.8) SIIO 2 S..24 (6.) WIT SS OS admium, Yellow hromate admium, Olive rab onnector Size 09, 5, 2, 25, 3, 37, 5, 5-2, 67, 69, 00 (See Table I) Table I: imensions.25 (3.8) X. ax. ax. ax. In. In. In. In. In. In #2-56 U TS I #4-40 U TS. 00 I aterials Shell: luminum lloy 606 -T6 lips: 7-7 Stainless Steel ardware: 300 Series Stainless Steel.32 (7.9) IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

277 icro- ackshells Round able ntry Strain Relief ackshell with Saddle ar lamps IX Size #4-40 TS Ø Strain Relief ackshells feature saddle bar clamps for easy installation. -Rings attach the backshell to the icro- connector. ow To Order Round able Strain Relief ackshells Sample art umber m 25 h c Series Shell inish hem ilm (lodyne) admium, Yellow hromate lectroless ickel admium, Olive rab Z2 old onnector Size 09, 5, 2, 25, 3, 37 5, 5-2, 67, 69, 00 (See Table I) ardware Option OIT illister ead ackscrew ex ead ackscrew xtended ackscrew ackpost, emale OIT (eave lank) ackscrews ttach With -Ring. "" lip ackscrew This Option pplies to Sizes 09 through 69. ttachment Option Size 00 is ot vailable with -Ring. Table I: imensions ax. ax. Ø ax. ax. ax. In. In. In. -RI O IISTR SRW #2-56 TS SIZ # 4-40 TS SIZ 00 In. ± (7.). 50 (2.7) ± (6.6) O X SRW O OST O XT SRW In. In. In I TRT OIURTIO aterials Shell: luminum lloy 606 -T6 lips: 7-7 Stainless Steel ardware: 300 Series Stainless Steel 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

278 wik-ty Strain Relief ackshell icro- ackshells.38 (9.65).75 (4.4) wik-ty ackshell is stocked in all sizes. hoose ickel inish and T top entry for best availability. ustomer-furnished cable ties provide strain relief to wire bundles. Suitable for jacketed cable or use with individual wires. T - TO TRY SOW WIT IISTR SRW OTOR ORR SRTY #2-56 U TS I #4-40 U TS. 00 I ow To Order wik-ty Strain Relief ackshells Sample art umber 500t02 m 25 h Series 500T02 - Top ntry 500S02 - Side ntry ntry Shell inish hem ilm (lodyne) lectroless ickel Z2 old Table I: imensions admium, Yellow hromate admium, Olive rab onnector Size 09, 5, 2, 25, 3, 37 5, 5-2, 67, 69, 00 (See Table I) ardware Option illister ead ackscrew xtended ackscrew ex ead ackscrew ackpost, emale S - SI TRY SOW WIT XT SRW OTOR ORR SRTY - 45º TRY SOW WIT X SRW OST OTOR ORR SRTY ax. ax. ax. ax. ax. ax. ax. ax. ax. Size In. In. In. In. In. In. ±.005± 0.3 In. In. In. In. In. In aterials Shell: luminum lloy 606 -T6 lips: 7-7 Stainless Steel ardware: 300 Series Stainless Steel IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

279 icro- ackshells otting Shell IX Size.094 (2.4) RIUS 4 S. otting Shells provide easy encapsulation of icro- solder cup terminations. These potting shells provide.25 inches (6.3 ) of depth..75 (4.4) ow To Order otting Shells Table I: imensions OTOR ORR SRTY #2-56 U TS I #4-40 U TS. 00 I ax. ax. In. In. In..395 (9.27) X. In. ±.030 aterials Shell: luminum lloy 606 -T6 lips: 7-7 Stainless Steel ardware: 300 Series Stainless Steel Sample art umber Series hem ilm (lodyne) admium, Yellow hromate Shell inish lectroless ickel admium, Olive rab Z2 old onnector Size 09, 5, 2, 25, 3, 37 5, 5-2, 67, 69, 00 (See Table I) ardware Option Omit illister ead ackscrew ex ead ackscrew xtended ackscrew ackpost, emale (See Table I) IISTR SRW O X SRW O OST ± 0.8 In. ±.030 O XT SRW ± lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

280 Section icro- Sav-on onnector Savers, ardware and ccessories icro- ccessories onnector Saver age -2 ender hanger age -3 Shorting dapters age -4 ust aps age -5 Interfacial Seals age -5 etal overs age -6 Rubber overs age -0 ackscrew its age - ackpost its age -3 roduct Selection uide icro- onnector Saver lways in stock,these feed-thru pin-socket adapters feature an innovative design using a single machined aluminum housing. ully I protected, Uni-Savers protect expensive equipment from damage during testing and burn-in. vailable in all sizes. icro- In-line ender hangers ixed signal and power plug to receptacle gender changers feature feed-thru pin-socket adapters and provide a convenient solution to mis-matched cables. Shorting dapters ombining a switching backshell and a icro- connector, these assemblies have all contacts shorted to each other. These shorting plugs provide S protection to sensitive instrumentation. icro- lastic ust aps lways in stock,these anti-static black dust caps protect icro- connectors from debris and damage. ll lenair icro- connectors are furnished with these dust caps; however, these caps may be purchased separately for replacements. Interfacial Seals Replace damaged icro- socket connector interfacial seals with new ones. Sometimes these seals can tear or be contaminated. eld in place by an interference fit with the contacts, damaged seals can be removed with tweezers. icro- etal rotective overs These aluminum covers provide complete mechanical and environmental protection. silicone gasket assures water-tight sealing. variety of attachment styles are available. ean Rubber overs or protection of icro-'s used in tactical equipment, these synthetic rubber covers are friction-fit and attach with nylon cord and ring terminals. ackscrew its These stainless steel kits are compatible with standard icro- connectors and meet the requirements of I-T ackscrews are available with slot heads or hex heads. hoose low profile or extended length versions. ackpost its ackposts are available in various lengths to fit front and rear panel mounted connectors. These stainless steel jackposts fit all standard icro- connectors. IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

281 icro- ccessories Sav-on onnector Saver W2 IX rotect xpensive quipment With lenair's icro- onnector Saver These connector savers feature a one-piece aluminum housing, Twistin contacts and locking hardware. Typical applications include test equipment and space-grade instruments. The onnector Saver prevents wear and tear on sensitive gear. Standard onnector Savers are electroless nickel plated. Other plating finishes are available on request. Size art umber In. imensions SOT I ax. ax. ax. ax. ax. ax. ax ompact Size reduces stress on mating connectors. In Stock, o Waiting ll standard Uni-Saver sizes are in stock (9, 5, 2, 25, 3, 37, 5 and 00 pin). I rotected one piece shell. In. ±.003 ± (2.70) In. In. In. In. ±.003 ± 0.08 In. In. In. 9 W2-9US W2-5US W2-2US W2-25US W2-3US W2-37US W2-5US W2-5-2US aterials & inishes Shell luminum lloy 606 -T6 lectroless ickel lated ontacts old-lated opper lloy ncapsulant poxy Insulators ardware #2-56 U Thds 9-69 in #4-40 Thds 00 in lass-illed 300 Series Stainless Steel, assivated 67 W2-67US W2-69US W2-00US lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

282 Sav-on ender hanger ixed Signal and ower lug to Receptacle ender hanger icro- ccessories (X) ontact rrangement (X) Shell Size ow To Order Shorting lugs Sample art umber R R -2 - eneric art o. Insert rrangement and Shell Size Sav-on ender Shell lating/inish ardware Sav-on ender hanger See Table I Table I: imensions ower ontact uantity U RT icro ontact uantity.697(7.70) TROUOUT R ax ax In. In. R709-2R R709-2R R709-3R R709-2R R709-3R R709-0R R709-03R R709-R R709-2R or Specific shell layout dimension data please refer to S62 R - lug to Receptacle - admium 2 - elctroless ickel 3 - Stainless Steel assivated 4 - lack nodize 5 - old 6 - llochrome - Though ole - ackpost - xtended ackpost (plug) 2 - xtended jackpost (receptacle) - xtended jackpost (supplied loose piece) Sav-on ender hangers are the solution for mismatched cables. vailable for power only or power and signal combinations in 9 insert arrangements. ardware = xtended ackpost (plug) 2 = xtended ackpost (receptacle) = ackpost (plug and receptacle) IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

283 icro- ccessories Shorting lug ssembly IX Shorting lug ssemblies are icro- connectors with all contacts bussed/shorted together. nclosed in a backshell and fitted with jackscrews, these shorting plugs provide S protection to sensitive instrumentation. T #2-56 U TS I #4-40 U TS. 00 I ow To Order Shorting lugs Table I: imensions aterials & inishes Shells luminum lloy 606 -T6 ontacts old-lated opper lloy ncapsulant poxy Insulators lass-illed Interfacial Seal luorosilicone ardware 300 Series Stainless Steel, assivated Sample art umber S Series onnector Size 9, 5, 2, 25, 3, 37, 5, 5-2, 67, 69, 00 (Table I) ontact Type - in S - Socket Shell inish - admium, Yellow hromate 2 - lectroless ickel 4 - lack nodize 5 - old 6 - hem ilm ardware Option - illister ead ackscrew - ex ead ackscrew - xtended ackscrew - ackpost, emale - o ardware anyard Option - o anyard - lexible ylon Rope - Wire Rope, ylon acket - Wire Rope, Teflon acket anyard ength ength in One Inch Increments; xample: 6 equals six inches. Ring Terminal Ordering ode (3.6) (5.0) (4.2) (3.2) I.. of Ring Terminal S ORRI IO O IISTR SRW O X SRW O OST O XT SRW Size ax. ax. ax. ax. ax. In. In. In. In. In. In lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

284 nti-static Thermoplastic ust aps and luorosilicone Interfacial Seals icro- ccessories nti-static ust aps nti-static ust aps offer protection to icro- connectors for storage and handling. olded in black thermoplastic, these caps meet the anti-static decay rate specified in I-R U 94-V0 rated, self-extinguishing W onnectors and W onnectors Ref. Ref. Ref. Ref. art umber ayout In. In. art umber ayout In. In S S S S S S S S S S S S S S S S S S S S and Interfacial Seals or etal Shell icro- Socket onnectors Replacement Interfacial Seals fit icro- metal shell socket connectors. These blue fluorosilicone seals allow replacement of damaged seals. ayout and Ref..276 (7.0) and Ref. art umber In. In. 9S S S S S S S S S S S S S XR(.078) XR(.080) and IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

285 icro- ccessories etal rotective overs with Silicone Rubber askets and IX hoose etal rotective overs for full environmental protection. Silicone Rubber asket provides a watertight seal. Use with 8353 Type etal Shell icro- onnectors Select rotective over Style Style Style 2 Style 3 Use With icro- onnectors With ackposts ot for rear panel mounted connectors. Tapped Threads Silicone asket (ll Styles) Use With icro- onnectors With ackscrews anel Use With Rear-anel ounted icro- onnectors ow To Order Style and 2 rotective overs Sample art umber Series ad/olive rab - lack nodize ickel - hem ilm - admium, Yellow hromate rab - lectroless - admium, Olive Shell inish R - Red nodize Y - old Iridite Over admium late Z2 - old - lectroless ickel, rade Shell Size 09, 5, 2, 25, 3, 37, 5, 5-2, 67, 69, 00 (See Table I) ardware Option STY its icro- With ackposts, over has ackscrews - illister ead ackscrew (See ote 3) - ex ead ackscrew (See ote 3) STY 2 its icro-'s With ackscrews over has Tapped emale Threads - emale Threads anyard Option - o anyard - Wire Rope, ylon acket - lexible ylon Rope - Wire Rope, i-temp Teflon acket R - Wire Rope, V acket T - Wire Rope, o acket anyard ength ength in One Inch Increments; xample: 6 equals six inches. Ring Terminal Ordering ode (3.6) (5.0) (4.2) (3.2) I.. of Ring Terminal ow To Order Style Style 3 rotective over Sample art umber R Series lack nodize ickel - hem ilm Shell inish - admium, Yellow hromate rab - admium late/olive rab - lectroless - admium, Olive Z2 - old R - Red nodize Y - old Iridite over admium late Shell Size 9, 5, 2, 25, 3, 37, 5, 5-2, 67, 69, 00 (See Table I) Rear ounted (Omit for ront ount) R -.03 (0.79) anel R (.9) anel R (.57) anel R (2.36) anel ardware Option - (2) ale illister ead - (2) ale ex Socket - (2) emale ackpost - () emale ackpost and () ale illister ead - () emale ackpost () ale ex Socket anyard ength - o anyard - lexible ylon Rope R - Wire Rope, V acket - Wire Rope, ylon acket - Wire Rope, i-temp Teflon acket T - Wire Rope, o acket ttachment Ring "" ia (3.6) (4.6) (4.8) (5.0) (4.2) (3.2) (5.5) ttachment ength Opt xample 2 = 2 inches (omit for standard 4 inch) 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

286 etal rotective overs with Silicone Rubber askets and icro- ccessories Table I: rotective over imensions Style Style 2 Style 3 ength RI TRI I. #2-56 U TRS SIZS 9-69 #4-40 U TRS SIZ 00 ength RI TRI I. #2-56 U TRS SIZS 9-69 #4-40 U TRS SIZ 00 ength RI TRI I..260 (6.6) X #2-56 U TRS SIZS 9-69 #4-40 U TRS SIZ 00 or icro- onnectors With ackposts or icro- onnectors With ackscrews or Rear-anel ounted icro- Shell Size Size 380 (9.6).280 (7.) imensions for Style and 2 ax. ax. ax. ax. In. In. In. In. In imensions for Style 3 Ref Ref ax ax In. In. In. In. In * * Style 3 Rear ounted ash o. ash o In. anel Thickness R R R R IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

287 icro- ccessories etal rotective overs with Silicone Rubber askets Style Use With icro- lugs Table I: Select rotective over Style ST O U OVR OY Style R Use With icro- Receptacles hoose etal rotective overs for full environmental protection. Silicone Rubber asket provides a watertight seal. ow To Order etal rotective overs Sample art umber Series admium late/olive rab - lack nodize - hem ilm - admium, Yellow hromate Shell inish - lectroless ickel - admium, Olive rab R - Red nodized Y - old Iridite Over admium late Z - Stainless Steel/assivate Z2 - old late - lectroless ickel, rade onnector Size 9, 5, 2, 25, 3, 37, 5, 5-2, 67, 69, 00 (See Table I) Style - ust over for lug R - ust over for Receptacle (See Table II) - o ardware (Ø.093) - exhead ackscrew ardware S - Slotted ackscrew - emale ackpost - xtended exhead ackscrew S - xtended Slotted ackscrew - exhead on-removable ackscrew - xtended on-removable ackscrew - Wire Rope, ylon acket - Wire Rope, Teflon acket ttachment Type - o anyard ttachment - o anyard Or ttachment oss R - Wire Rope, V acket T - Wire Rope, o acket - lexible ylon Rope ttachment ength (Inhes) ength in One Inch Increments; xample: 6 equals six inches. ttachment iameter (3.6) (5.0) (4.2) (3.2) I.. of Ring Terminal otes. ssembly identified with manufacturer's name and p/n, space permitting. 2. aterial/finish: ackshell - see ow To Order Table ardware - cres/passivated ttachment - see ow To Order Table asket - silicone/.. 3. ttachment to withstand 25 lb min. ull test. IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

288 etal rotective overs with Silicone Rubber askets icro- ccessories.450 X.450 X X ST O U OVR OY Table II: imensions O OSS O '' TTT TY (S OW TO ORR T OR TIS) X TTT I. T TTT I T Style R ust over or Receptacle Style ust over or lug ayout ax ±.003 ax ax ax 9R R R R R R R R R R R IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

289 icro- ccessories arshall ean rotective Rubber overs with Tether Rope IX.25 (6.4) X.30 (7.9) X its etal Shell 8353 Type onnectors.40 (0.2) Rubber overs for Tactical quipment and ield Instruments These friction-fit covers provide dust and splash protection. Two Tether Styles hoose ring terminals for attachment to a panel, or choose slip knots for cable attachment. -55 to +25 Temperature Range ow To Order Rubber rotective overs RI TRI SI OT imensions over Ring Terminal rimp Ring T T TRI T.50 (2.7) I. aterials & inishes SR Rubber er ST 2000 Type Stainless Steel opper, lack Oxide inish Sample art umber S Series onnector ayout 9,5, 2, 25, 3, 37, 5, 5-2, 67, 69, 00 9S,5S, 2S, 25S, 3S, 37S, 5S, 5-2S, 67S, 69S, 00S ylon ord Option Omit - (leave blank) over only, no cord - ylon ord ylon ord ength ength in One Inch Increments; xample: 6 equals six inches ±.250 (6.35) Inches ttachment Option Ring Terminal (3.2) I (3.6) I (4.2) I (5.0) I.. S - Slip not Rubber Type Omit - Standard Rubber - onductive Rubber ayout ax. ax. ax. ax. ayout In. In. In. In. 9, 9S , 5S , 5S , 5-2S , 2S , 67S , 25S , 69S , 3S , 00S , 37S Standard material contains trace amounts of sulfur (a vulcanizing agent) which is known to contribute to degradation/ corrosion of silver plated components such as braid, etc. Specify O ode suffix -675 for sulfur-free material. 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

290 Stainless Steel ackscrew its with -Rings XX icro- ccessories il Spec ackscrew its feature 300 series stainless steel and easily attach to icro- connectors with an e-ring. Order One it er onnector ach kit contains two jackscrews and e-rings. onfiguration onnector Size, Thread Size Sizes 9 to 69 ontacts. il Spec Size to #2-56 U-2 il Spec art umber il Spec ackscrew its art umber lenair art umber.062 (.57) X 8353/ (3.8) I.03 (2.62) X.083 (2.) I imensions #2-56 U (2.29) I RT T.258 (6.55) X ex ead ow rofile Slot ead ow rofile ex ead xtended Sizes il Spec Size #4-40 U-2 Sizes 9 to 69 ontacts. il Spec Size to #2-56 U-2 Sizes il Spec Size #4-40 U-2 Sizes 9-69 ontacts. il Spec Size to #2-56 U-2 Sizes il Spec Size #4-40 U / (.57) X.87 (4.75) I 8353/ (3.8) I 8353/ / / (3.56) I.098 (2.49).292 (7.4) X.083 (2.) I.03 (2.62) X.258 (6.55) X.87 (4.75) I.56 (3.96) I X.200 (5.08) I X.098 (2.49).40 (3.56) I.062 (.57) X.60 (5.49) X.062 (.57) X.60 (5.49) X #4-40 U 2.0 (2.79) I RT T #2-56 U (2.29) I RT T #4-40 U 2.0 (2.79) I RT T.292 (7.4) X.083 (2.) I.40 (3.56) I #2-56 U (2.29) I RT T.258 (6.55) X #4-40 U 2.0 (2.79) I RT T.292 (7.4) X Slot ead xtended Sizes 9-69 ontacts. il Spec Size to #2-56 U-2 Sizes il Spec Size #4-40 U / / (3.96) I X.200 (5.08) I X.60 (5.49) X.60 (5.49) X.083 (2.) I.40 (3.56) I #2-56 U (2.29) I RT T.258 (6.55) X #4-40 U 2.0 (2.79) I RT T.292 (7.4) X IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

291 icro- ccessories Stainless Steel ackscrew its with lips XX lip ackscrew its offer an alternative to e-ring jackscrew kits. The c clip fits over the flange and, unlike e-rings, cannot be dislodged in handling or use. orrosion-resistant Steel The clip is made from 7-7 spring temper stainless steel. The jackscrew is made from 25 SI tensile strength stainless steel, passivated. Order Two its er onnector. ach kit consists of one jackscrew and one c clip. pplication ote: The magnetic permeability of the c clip exceeds the 2.0 µ maximum of I-T (5.2).35 (3.4) R.295 (7.5).205 (5.2) R.30 (3.3) #2-56 U.30 (3.3) #4-40 U SIZ 00 igure lip for Size 9-69 in icro- igure 2 lip for Sizes icro- IX art umber ackscrew Type Thread Size onfiguration Recommended ax.torque ax. Weight In rams (2 its) S Slot ead #2-56 U igure 2.5 inch-pounds ex head #2-56 U igure 2.5 inch-pounds S Slot ead #4-40 U igure inch-pounds ex head #4-40 U igure inch-pounds.5 Replacement ardware its for lip icro- ackshells Replacement ardware its for Standard Series 50 icro- ackshells. Order Two its er onnector. ach ackscrew kit consists of one jackscrew and one "" clip. orrosion-resistant Steel The clip is made from 7-7 spring temper stainless steel. The jackscrew is made from 300 series stainless steel, passivated. illister ead ackscrew ex ead ackscrew xtended ackscrew ackpost art umber Thread Size art umber Thread Size art umber (dash # = size) Overall ength art umber Thread Size #2-56 (9-69 pin) #2-56 (9-69 pin) (32.3) #2-56 (9-69 pin) #4-40 (75-30 pin) #4-40 (75-30 pin) (35.6) #4-40 (75-30 pin) (38.6) (40.) (4.7) (42.7) (43.3) (46.0) 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

292 Stainless Steel ackpost its Standard ex, Rear anel or Rear anel XX, X-X, X-X and X-X-X icro- ccessories Rear anel ount icro- ackpost icro- ackpost its feature 300 series stainless steel. Select a style: standard hex posts, rear panel, or rear panel printed circuit board. Order One it er onnector. ach kit contains two jackposts. ackpost eneral information. aterial and inish: orrosion resistant steel in accordance with ST 484 and ST 582, passivated in accordance with ST ounting Torque: #2-56 threads= inch-pounds, #4-40 threads = inch-pounds. ating Torque: #2-56 threads= inch-pounds, #4-40 threads = inch-pounds. aximum recommended torque for installation and operation. 3. Standard ackage: One kit consists of two jackposts, 2 washers and 2 nuts for styles and 2. Style 3 kits contain two jackposts. One kit per bag. 4. pplication: Style and 2 jackposts are compatible with any standard icro- connector. Style 3 jackposts for rear panel mounting lenair printed circuit board connectors types S, R, and R only. Select a ackpost Style Style Style 2 Style 3 Use With Standard Solder up or igtail icro- onnectors Use With Rear anel ounted Solder up or igtail icro- onnectors.90 /.85 (4.8 / 4.7).088 (2.2) X.026 (0.7) X.072 (.8) X Use With Rear anel ounted rinted ircuit oard icro- onnectors Style ackpost its Style ackpost its are standard kits for installation on all standard icro- connectors. ach kit contains two jackposts, two hex nuts and two lockwashers. onnector Sizes (TS) sizes thru (#2-56) size (#4-40) il Spec art umber 8353/ /05-7 lenair art umber ength In. ±.05 ± igure igure igure (2.2)-56 U-2.25 (3.2) X igure #2-56 ackpost.086 (2.2)-56 U-2 WSR UT.54 (3.9) X.2 (2.8)-40 U-2.85 /.75 (4.7 / 4.4).088 (2.2) X.03 (0.8) X.072 (.8) X igure 2 #4-40 ackpost.87 (4.7) X.40 (3.6) ±.003 (0.).2 (2.8)-40 U-2 WSR UT.87 (4.7) X IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

293 icro- ccessories Stainless Steel ackpost its Standard ex, Rear anel or Rear anel XX, X-X, X-X and X-X-X IX Style 2 ackpost its or Rear ounted onnectors Style 2 ackpost its are for rear panel mounted connectors.these round, slotted posts accommodate panel thickness from.03 inches (0.8 ) to.25 inches (3.2 ). onnector Size (TS) sizes thru (#2-56) size (#4-40) onnector Size (TS) sizes thru (#2-56) size (#4-40) anel Thickness In. mm art umber In. ±.003 or S Style ircuit oard onnectors See atalog age -6 ± onnector Style, Overall ength S, R.365 (9.3) O R.398 (0.) O R, R.475 (2.) O S.360 (9.) O anel Thickness In. art umber igure igure igure 2 In. ± ±.05 (2. ± 0.4).026 (0.7) X ± (.8) X igure #2-56 ackpost igure igure igure 2.56 (4.0) I.050 (.3).88 ±.005 (4.8 ± 0.3).80 ±.005 (4.6 ± 0.3).086 (2.2)-56 U ±.05.9 (3.0) (2. ± 0.4).086 (2.2)-56 U-2 OWSR.072 (.8) X UT.54 (3.9) X.56 (4.0) I.88 ±.005 (4.8 ± 0.3) OVR T OVR T.87 (4.7) I.80 ±.005 (4.6 ± 0.3).03 (0.8) X igure #2-56 ackpost igure 2 #4-40 ackpost.050 (.3).2 (2.8)-40 U-2.40 (3.6) ±.003 (0.).2 (2.8)-40 U-2 WSR UT.87 (4.7) X igure 2 #4-40 ackpost Style 3 ackpost its or rinted ircuit oard onnectors Style 3 ackpost its are for rear panel mounted connectors. Select the right post by choosing the connector style (S, R and R are the three standard connector configurations)..050 (.3).086 (2.2)-56 U-2.9 (3.0).086 (2.2)-56 U-2.87 (4.7) I.050 (.3).2 (2.8)-40 U-2.40 (3.6) ±.003 (0.).2 (2.8)-40 U lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

294 etal Shell dgeboard and circular connectors or high reliability applications W dgeboard eatures: esigned for motherboard to daughter applications vailable in four styles: cardedge and through hole for daughtercards as well as vertical and right angle for motherboards ardened versions of 28 pin and 84 pin commercial board connectors W ircular eatures: esigned for panel to cord I/O applications uick-connect/disconnect capabilities vailable in two sizes with an option of 7 or 9 contacts actory terminated lenair, Inc. 2 ir Way lendale, [email protected]

295 Section W dgeboard and W ircular onnectors icro- dge oard icrostrips roduct Selection uide Rugged il-spec erformance in a igh ensity ackplane onnector: The W dgeboard W dgeoard onnectors age -2 W dgeoard onnectors These two row.050 inch (.27 mm) pitch connectors are designed for motherboard-to-daughtercard applications. vailable in four styles: surface mount cardedge for daughtercards, vertical thruhole for motherboards, right angle thru-hole for daughtercards, and prewired cable connectors, these W connectors feature rugged aluminum shells and Twistin contacts. The single gang 28 pin and the two gang 84 pin (2 X 92 pin) are a ruggedized alternative to commercial board connectors. W icro icular onnectors eature uick coupling and uick Release W icro ircular onnectors The W connector provides quick-disconnect capability combined with a high performance contact system and rugged construction. Intended for panelto-cord I/O applications, these connectors are found in tactical military equipment, weapons systems and various instrumentation applications. vailable in two sizes with 7 or 9 contact, the W is factory-terminated to the wire of your choice. Shielded, overmolded cordsets and other custom versions are available ontacts lenair Series 80 9 ontacts W Series 9 ontacts lenair ano 9 ontacts W Series 9 anel ount Receptacle age -3 *The lenair Series 89 anominiature onnectors atalog is available online at W Series 9S able lug Release Sleeve ock Ring IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

296 icro- dge oard icrostrips W Series dge oard onnectors Industry-Standard, pproved for irborne omputers W dgeoard connectors meet the requirements of I-T-55302/20 thru /23. vailable with 28 or 84 contacts. Rugged luminum Shell and Twistin ontacts W connectors share the same design and construction as the lenair icro connector. ackplane, aughtercard and Wired Vertical mount thru-hole motherboard connectors and straddle mount daughtercard connectors are complemented by right angle thru-hole and pre-wired I/O versions. Rugged il Spec erformance in a igh- ensity ackplane onnector System: oard The W dgeoard eaturing a width of only ¼ inch (6.4 ), W Series connectors provide high-density in a rugged metal shell connector. ontacts are rated at 3 amps, and the WV voltage rating is 50 volts RS at 70,000 feet altitude. The two row,.050 inch (.54 ) spacing is made possible by using Twistin reverse gender contacts. Insert-molded insulators are resistant to heat and chemicals. ontacts are beryllium copper with fifty microinches of gold plating. Shells are machined aluminum alloy. exagonal polarizing keys allow up to 36 keying options. Rigid poxy otting ompound iquid rystal olymer ielectric icro Socket ontact iquid rystal olymer ielectric Twistin ontact ontact Tail.09 (0.49) iameter opper Wire, Solder ipped luminum Shell, lectroless ickel lated luminum Shell, lectroless ickel lated Rigid poxy otting ompound IX ontact Tail.09 (0.49) iameter opper Wire, old lated 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

297 Vertical ount ackplane onnector W-28 icro- dge oard icrostrips W-28 ackplane Thru-ole onnector.9 I # 64 I # /.263 (7.04/6.68) X Ø.096 (2.44) art umber W2-285W ±.05 (00.33 ± 0.38) (93.98) 3.38 ±.003 (84.28 ± 0.08).050 (.27) TY..075 (.9) 28 X Ø.040 T (93.98) I # I #.40 (0.) ±.00 (0.25).275 (6.99) U SS T.050 (.27) (TY) (6.73) X..375/.325 (9.52/8.26).050 (.27).300/.250 (7.62/6.35) V O Ø.09/.098 (2.3/2.49) I 2 S.0375 (0.96).075 (.9).90/.80 (4.83/4.57) V O Ø.07/.02 (0.43/0.53) TTR SOW IS OR OTOR OUTI SI O OR IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

298 icro- dge oard icrostrips Straddle ount ard-dge onnector W-28S IX W-28S Straddle ount ardedge onnector.9.09/.098 (2.3/2.49) I 2 S.250 (6.3) I # 64 I # (4.83) I 2 S 63 U SS T.050 (.27) (TY) art umber W2-28S4S ±.05 (00.33 ± 0.38) (93.98) 3.4 ±.00 (86.6 ± 0.25) (93.98).050 (.27) TY..275 (6.99) TTR SOW IS T S O OT SIS O OR I #.09/.098 (2.3/2.49) I 2 S.098/.09(2.49/2.3) I OR.87 2 S.020/.032 (0.5/0.8).465 (.8) X I #.250 (6.35) I.28 (3.25) X.265 (6.73) X..035 (0.89).200 ±.020 (5.08 ±.5) I.050 (.27).90 (4.83) I 2 S.070 (.78).260/.240 (6.60/6.0) OR /6" TI OR.030 (0.76) X.00 (2.54) I SOR 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

299 Right ngle oard onnectors W-28S icro- dge oard icrostrips W-28S Right ngle onnector ase art umber Tail ength (0.2).30 (7.6).80 ± ± 0.3).9 I #.25 (6.3) I # TI T ±.05 (0.38) W2-28SR /.098 (2.3/2.49) I 2 S Ø.098/.09(2.49/2.3) I OR.90 (4.83) 2 S ±.05 (00.33 ± 0.38) (93.98) 3.4 ±.00 (86.6 ± 0.25).050 (.27) TY. icro Socket ontact luminum Shell, lectroless ickel lated I # I # (6.73) X (9.69) X.09/.098 (2.3/2.49) I 2 S OTOR TI TIS SI (93.98) iquid rystal olymer ielectric Rigid poxy otting ompound iquid rystal olymer Tray, poxy illed oard ontact Tail.09 (0.49) iameter opper Wire, Solder ipped.050 (.27).275 (6.99) 63 U SS T.050 (.27) (TY) TTR SOW IS OR OTOR OUTI SI O OR 3 2 IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

300 icro- dge oard icrostrips Vertical ount ackplane onnector W-84 W-84S Straddle ount ardedge onnector.9 I # 92 I # /.263 (7.04/6.68).09/.098 (2.3/2.49) I 3 S ±.005 (70.49 ± 0.3) 84 X Ø.040 (.02) T (6.35) art umber W2-845W ±.05 (47.32 ± 0.38) (40.97) 5.222/5.24 (32.64/32.45).075 (.9) (40.97) (70.49).250 (6.35).275 (6.99) (.27) TY U SS T.050 (.27) (TY) I # I #.400 (0.) ±.00 (0.25).300/.250 (7.62/6.35).375/.325 (9.52/8.26).075 (.9).0375 (0.96) TY.265 (6.73) X..050 (.27).09/.098 (2.3/2.49) I 3 S.90/.80 (4.83/4.57).07/.02 (0.43/0.53) IX TTR SOW IS OR OTOR OUTI SI O OR 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

301 Straddle ount ard-dge onnector W-84S icro- dge oard icrostrips W-84S Straddle ount ardedge onnector.9.90 (4.83) I 3 S I # (.78) 45 U SS T.050 (.27) (TY).09/.098 (2.3/2.49) I 3 S.250 (6.35) I ±.005 (70.49 ± 0.3).260/.240 (6.60/6.0) OR /6" TI OR art umber W2-84S4S ±.05 (47.32 ± 0.38) (40.97) (40.97) 5.33 (35.38) X I # (.27) TY..277/.263 (7.04/6.68) (70.49).275 (6.99).275 (6.99) 45 U SS T.050 (.27) (TY) TTR SOW IS T S O OT SIS O OR.465 (.8) X.09/.098 (2.3/2.49) I 3 S.200 ±.020 (5.08 ±.5) I.275 (6.99) I # I #.020/.032 (0.5/0.8).28 (3.25) X.265 (6.73) X..030 (0.76) X.050 (.27).00 (2.54) I SOR IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

302 icro- dge oard icrostrips Right ngle oard onnector W-84S W-84S Right ngle onnector ase art umber Tail ength (0.2).30 (7.6).80 ± ± 0.3).09/.098 (2.3/2.49) I 3 S.9 I #.25 (6.3) W2-84SR I # 45 U SS T.050 (.27) (TY) 84 X Ø.040 (.02) T TI T ±.05 (0.38) /.09(2.49/2.3) I OR.90 (4.83) 3 S ±.005 (70.49 ± 0.3) icro Socket ontact luminum Shell, lectroless ickel lated ±.05 (47.32 ± 0.38) (40.97) 5.33 (35.38) X (40.97).250 (6.35) (6.35) (.27) TY (70.49) (6.99) I # U SS T.050 (.27) (TY) iquid rystal olymer ielectric Rigid poxy otting ompound iquid rystal olymer Tray, poxy illed oard ontact Tail.09 (0.49) iameter opper Wire, Solder ipped I # (6.73) X..775 (9.69) X (.27).09/.098 (2.3/2.49) I 3 S TY TY IX TTR SOW IS OR OTOR OUTI SI O OR 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

303 W re-wired and Solder up onnectors W2 icro- dge oard icrostrips W dgeoard onnectors or Input/Output Wire-To-oard pplications With 28 or 84 contacts, these narrow profile factoryterminated W connectors provide a space-saving I/O wire to board solution. onnector width of.25 inch (6.4 ) allows for high-density card slots. igh erformance Twistin ontacts Suitable for airborne avionics processors and missioncritical computers, these pre-wired connectors feature interfacial seals and backpotting for improved environmental protection. Or, choose solder cup connectors for integration into wire harnesses. ow To Order W igtail onncectors Sample art umber W2-28 p -6 k 7-8 n Series W2 onnector ayout 28, 84 ontact Type - in S - Socket Wire age (W) 4 - # # # #30 Wire Type / 600 VRS Teflon (T) / VRS odified ross-inked Tefzel (T) Wire olor - White 2 - Yellow 7 - Ten olor Repeating Wire ength Inches 8 - Total ength In Inches. 8 Specifies 8 Inches. ardware Option - o hardware ow To Order W Solder up onnectors Sample art umber W2-28 p s n Series W2 onnector ayout 28, 84 ontact Type - in S - Socket Termination Type S - Solder up ardware Option - o ardware IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

304 icro- dge oard icrostrips W26 uick isconnect icro ircular onnectors lug onnectors lug With Socket ontacts ontacts ace View in onnector (Receptacle) Receptacle With in ontacts ow To Order lug (Socket) onnectors Table I: ontact rrangements W icro ircular onnectors feature quick coupling and quick release. The plug has a knurled release sleeve. To unmate, just pull back on the sleeve, compressing the locking ring and free it from the receptacle. hoose (7) or (9) ontacts onnectors are supplied with hookup wires installed and potted. Sample art umber W26-9 S Series W26 o. of ontacts 7, 9 (See Table I and II) ontact Type S - Socket Wire age (W) 4 - # # # #30 Wire Type / 600 Vrms Teflon (T) / Vrms odified ross-inked Tefzel (T) - White 2 - Yellow Wire olor 5 - olor oded Striped Wire er I-ST Ten olor Repeating Wire ength Inches 8 - Total ength In Inches. 8 Specifies 8 Inches. 7 ontacts ace View Socket onnector (lug) ontacts ace View in onnector (Receptacle) ontacts ace View Socket onnector (lug) IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

305 W27 W28 and W29 uick isconnect icro ircular onnectors Receptacle onnectors, Inline, ront and Rear ount icro- dge oard icrostrips ow To Order Receptacle (in) onnectors Sample art umber W Series o. of ontacts ontact Type W27 7, 9 (See Table I and II) - in Wire age (W) 4 - # # # # / 600 Vrms Teflon (T) Wire Type / Vrms odified ross-inked Tefzel (T) Wire olor - White 2 - Yellow 7 - Ten olor Repeating Wire ength Inches 8 - Total ength In Inches. 8 Specifies 8 Inches. ow To Order Receptacle (in) onnectors Sample art umber W Series W28 o. of ontacts 7, 9 (See Table I and III) ontact Type - in Wire age (W) 4 - # # # #30 Wire Type / 600 Vrms Teflon (T) / Vrms odified ross-inked Tefzel (T) - White 2 - Yellow Wire olor 5 - olor oded Striped Wire er I-ST Ten olor Repeating Wire ength Inches 8 - Total ength In Inches. 8 Specifies 8 Inches. ow To Order Receptacle (in) onnectors Sample art umber W Series W29 o. of ontacts 7, 9 (See Table I and III) ontact Type - in Wire age (W) 4 - # # # #30 Wire Type / 600 Vrms Teflon (T) / Vrms odified ross-inked Tefzel (T) Wire olor - White 2 - Yellow 7 - Ten olor Repeating Wire ength Inches 8 - Total ength In Inches. 8 Specifies 8 Inches. IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

306 icro- dge oard icrostrips uick isconnect icro ircular onnectors W26 and W27 urrent Rating ielectric Withstanding Voltage Insulation Resistance ontact Resistance ow evel R erformance Specifications V Sea evel 50 V 70,000 eet 5000 egohms inimum 8 illiohms aximum 32 illiohms aximum Operating Temperature -55. to +50. Shock 50 g. Vibration 20 g. ating orce (0 Ounces) X (# of ontacts) onnector Shell, Release Sleeve Insulator ock Ring & am ut in ontact Socket ontact ncapsulant Table II: imensions.820 (20.83) X aterials and inishes luminum lloy 606 with lectroless ickel lating rass with lectroless ickel lating iquid rystal olymer () Stainless Steel eryllium opper With 50 icroinches old over ickel lating opper lloy With 50 icroinches old Over ickel lating poxy Resin ysol 425 ISUT WIR O RI RS SV U OTOR W (2.7) X UTOUT TRS ROT OUT RT OTOR W27 IX ayout ax. ax. ax. ex. Thds. ia. In. In. In. In U U In. ±.005 ± 0.3 In. 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

307 uick isconnect icro ircular onnectors W28 and W29 icro- dge oard icrostrips urrent Rating ielectric Withstanding Voltage Insulation Resistance ontact Resistance erformance Specifications V Sea evel 50 V 70,000 eet 5000 egohms inimum 8 illiohms aximum onnector Shell, Insulator ock Ring & am ut aterials and inishes luminum lloy 606 with lectroless ickel lating iquid rystal olymer () Stainless Steel ow evel R 32 illiohms aximum Operating Temperature -55. to +50. Shock 50 g. Vibration 20 g. ating orce (0 Ounces) X (# of ontacts) in ontact Socket ontact ncapsulant eryllium opper With 50 icroinches old over ickel lating opper lloy With 50 icroinches old Over ickel lating poxy Resin ysol 425 Table III: imensions.530 X. I I RT W Ø UTOUT.520 TR RR OUT RT OTOR W29 ayout Ø ax. Ø ax Thread Ø In. In. In. In. In /6-28 U /6-24 U IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

308 Special pplications lenair icrostrips igh reliability in a single row small form package lenair Series 7 icrostrips feature a.050" high density board to wire connectors with optional guide pin polarization. Ideally suited for medical equipment, avionics, instrumentation satellites and other space applications. The icrostrip offers an economical single row solution where space savings is a priority. The rugged, high force twistpin contact accepts up to #24 wire, the current rating is 3 mps, the voltage is 600 Vac, with a temperature rating of -55 to +50. icrostrips are available with up to 30 contacts. ive termination styles are availaable: solder cup, pre wired,, surface mount and back to back. lenair, Inc. 2 ir Way lendale, [email protected]

309 Solder up icrostrips 7-00 age -4 Solid Wire icrostrips age -6 re-wired icrostrips age -7 Right ngle.050" Spacing age -9 Right ngle Staggered 7-005, age -9 Vertical ount eaders age -9 Surface ount age -3 Single Row ack-to- ack icrostrips age -5 Section Series 7 icrostrips roduct Selection uide roduct Selection uide Single Row icrostrips with Solder up ontacts Solder cup contacts for termination to #24 to #30 solid or stranded wire. vailable in to 30 positions. igh performance 8353 Twistin contact system. ontacts are factory-installed, non-removable and are encapsulated with epoxy. 3 mp, 600 Vac,-55 to +50. Single Row icrostrips with Solid Wire actory-terminated to solid copper wire. vailable in to 30 positions. Optional pre-tinned leads or standard gold plated wire. igh performance 8353 Twistin contact system. ontacts are factory-installed, non-removable and are encapsulated with epoxy. 3 mp, 600 Vac,-55 to +50. Single Row icrostrips with Insulated Stranded Wire actory-terminated to mil spec high-temperature wire, size #24 to #30. vailable in to 30 positions. igh performance 8353 Twistin contact system. ontacts are factory-installed, non-removable and are encapsulated with epoxy. 3 mp, 600 Vac,-55 to +50. Single Row Right ngle -.050" oard Spacing Thru-hole mounting. old-plated.020" diameter right angle tails are on.050" centers for maximum density. vailable in to 30 positions. igh performance 8353 Twistin contact system. ontacts are factory-installed, non-removable and are encapsulated with epoxy. 3 mp, 600 Vac,-55 to +50. Right ngle - Staggered Thru-hole mounting. old-plated.020" diameter right angle tails are on staggered.050" or.00" spacing between rows. vailable in to 30 positions. igh performance 8353 Twistin contact system. ontacts are factoryinstalled, non-removable and are encapsulated with epoxy. 3 mp, 600 Vac,- 55 to +50. Single Row Vertical Thru-hole mounting. old-plated.020" diameter tails are spread to.00" by.00" centers for easy placement. vailable in to 30 positions. igh performance 8353 Twistin contact system. ontacts are factory-installed, non-removable and are encapsulated with epoxy. 3 mp, 600 Vac,-55 to +50. Surface ount -.050" oard Spacing.03" diameter tails are formed to allow soldering to the surface of a board or flex circuit. Tails are solder-dipped in 63/37 tin-lead. vailable in to 30 positions. igh performance 8353 Twistin contact system. ontacts are factory-installed, non-removable and are encapsulated with epoxy. 3 mp, 600 Vac,-55 to +50. Single Row ack-to-ack icrostrips These.050" pitch single row surface mount microstrips are available with to 30 contacts. Optional guide pins provide circuit polarization. ontacts are Twistin type and are gold-plated. ousing is molded thermoplastic. Suitable for high-reliability applications where long-term resistance to fretting corrosion is a necessity. 3., 600 Vac, -55 to +50. IX icro- atching icrostrips 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

310 icro- atching icrostrips Series 7 icrostrips eneral Information igh Reliability Twistin ontact System #24-30 W Wire Size.050" itch ontact Spacing Solder up, re-wired or eaders 3 mps, +50, 600 Vac Series 7 icrostrips eliver Twistin erformance and urability In an conomical, Space-Saving Single Row ackage Series 7 icrostrips are intended for high reliability board-to-wire I/O and wire-to-wire applications. These nonenvironmental strips are typically used inside ruggedized equipment where moisture ingress is not a factor. The icrostrip connector provides significant advantages compared to commercial-grade headers and jumpers. The rugged, high force twistpin contact accepts up to #24 gage wire, the current rating is 3 mps, the voltage rating is 600 Vac, and the temperature rating is -55 to +50. The Series 7 strip connector meets all applicable requirements of I-T hoose solder cup, pre-wired, or printed circuit board versions. stainless steel latch provides secure coupling. Twistin ontact Socket ontact il Spec rimp oint in Insulator Socket Insulator poxy Why hoose Twistins? The lenair Twistin contact system provides a superior wire attachment compared to stamped contacts. This translates into lower long-term contact resistance and it does so under extreme conditions of vibration, shock and high heat. lus, Twistin connectors offer design flexibility without the penalty of longer delivery, setup charges or minimum order quantities. IX aterials and inishes ontacts opper alloy, 50 µinch gold plated Insulators iquid crystal polymer () atch Stainless Steel uide in Stainless Steel otting ompound poxy Insulated Wire er I-W-22759/ and /33 Solid Wire, Tails er , gold plated or tinned Specifications urrent Rating 3 mps ontact Resistance 8 milliohms maximum ielectric Withstanding Voltage 600 Vac sea level Insulation Resistance 5000 megohms minimum Operating Temperature -55. to +50. Shock 300 g. Vibration 37 g. 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

311 bout Spring atches, uide ins and ounting oles Optional stainless steel latch clips provide secure mating when subjected to shock and vibration. single center latch is suitable for most applications (ig. and ig. 2). ual end latches are also available (ig. 3). The spring latch is always installed on the socket strip (ig. ). The latch receiver is installed on the pin strip (ig. 2). To unmate the connectors, simply press the release tab while pulling the connectors apart. icrostrips are available with stainless steel guide pins. single guide pin provides circuit polarization. guide pin on each end (ig. 2) helps to align connectors when mating and prevents damage to contacts. or most applications the preferred configuration is a single center latch with no guide pins. ounting holes are now available (ig.3). ttach strips to circuit boards with size 0-80 screws (customer-supplied). atch Release Tab Series 7 icrostrips esigner's uide osition # Identified with White ot igure Socket Strip with enter atch art umber S Spring latch installed in the center cavity of the socket icrostrip. Ordering ode for enter atch. This strip has 5 circuits plus one cavity for the latch and two for the guide pins, for a total of 8 cavities. ote the white paint dot on the insulator. This dot indicates position #. The wire color code system is "0 olor Repeating". Wire # is black, followed by brown, red, orange, yellow, green, blue, violet, grey and white. bout oard ount Strips erospace customers typically use icrostrips for high reliability board-to-wire I/O applications. The pin strip is usually configured with right angle thru-hole tails. The strip is bonded to the board with epoxy, or attached to the board with screws installed in optional mounting holes. Surface mount and vertical mount versions are also available. igure 4 Right ngle in Strip with Staggered Tails, ounting oles and enter atch / ote that the board mounted strip has 23 cavities called out in the part number, but the mating socket strip (ig. ) has 7. lso note that three cavities are taken up by the mounting holes, and the position # white dot moves to the first electrical position. Spring atch lip atch igure 2 in Strip with enter atch and uide ins at oth ends. art umber Spring latch installed in the center cavity and guide pins installed in end cavities. This strip has five electrical circuits plus two positions for guide pins and one position for the latch for a total of eight cavities. The stainless steel guide pins are installed into the end cavities of the socket strip. The end cavities of the pin strip are opened up to accept the mating guide pins..062" (.57) iameter ounting ole 2 laces nd atches igure 3 Right ngle eader with nd atches and ounting oles. art umber atch clips installed into the end cavities of the icrostrip. Ordering ode for oth end atches. ote the mounting holes. These holes allow the strip to be attached to a circuit board. ach mounting hole requires three cavities. The board mount leads are formed into a single row on.050" centers. IX icro- atching icrostrips 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

312 icro- atching icrostrips Series 7 icrostrips Single Row Strips with Solder ups 7-00 ow To Order Solder up icrostrips Sample art umber S - Series umber of avities ontact ender and Solder up Size Single Row Solder up icrostrips These.050" pitch single row solder cup microstrips accept #26 to #30 gage wire with standard contacts and up to size #24 wire with "large bore" contacts. ontacts are factory-installed and potted. vailable with to 30 contacts. Optional stainless steel latching mechanism prevents de-mating. uide pins provide circuit polarization. ontacts are twistpin type and are gold-plated. ousing is molded thermoplastic. Suitable for high-reliability applications where long-term resistance to fretting corrosion is a necessity. 3., 600 Vac, -55 to Single Row icrostrip,.050" ontact Spacing, Solder up ontacts to 30 (See Table I) Total number of cavities includes guide pins,latches and mounting holes. The number of cavities equals the number of electrical circuits plus cavity for each guide pin and latch, plus 6 cavities for the mounting hole option. S SS S TS in ontacts, Size #26 Solder up Socket ontacts, Size #26 Solder up in ontacts, Size #24 Solder up Socket ontacts, Size #24 Solder up Optional uide in Omit or o uide in uide in in av. # uide in at oth nds (x) Replace (X) with guide pin location. Optional atch Optional ounting oles Omit or o atch Omit or o ounting oles enter atch ounting oles 3 shown above: atch at oth nds The three cavities on each end are filled with epoxy. Two.062" (.57mm) holes are cross-drilled to allow for attachment to a mounting surface. OT: when ordering "" Strip onnector allow for only 3 cavaties on each end (6 total) IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

313 # of avities.083 (2.0) R TY.300 (7.62) Series 7 icrostrips Single Row Strips with Solder ups 7-00 I OTOR.200 (5.08) X.0 (2.79) X 2Xø.062 (.57) ().050 (.27) X Table I: imensions 2Xø.062 (.57).050 (.27) X.083 (2.0) R TY.200 (5.08) X.062 (.57).35/.6 (3.43/2.95).200 (5.08) R X () ax. () ax. # of avities In. In. In. In. In. In / / / / / / / / / / / / ven umber of avities.25 (3.8) I OTOR SOT OTOR VITY VITY atch placed on next lower cavity prior to centerline. atch position = (# of avities) 2. enter atch ocations SOT OTOR () Odd umber of avities.25 (3.8) I OTOR SOT OTOR VITY VITY atch placed in cavity on centerline. atch osition = (# of avities+) 2. IX icro- atching icrostrips 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

314 icro- atching icrostrips Series 7 icrostrips Single Row Strips with Solid Wire icrostrips with Solid Wire These.050" pitch single row microstrips are factory-crimped to gold-plated solid copper wire. vailable with to 30 contacts. an be used for header. Solderdipped versions have 60/40 tin-lead solder. Optional latching mechanism provides secure connection. uide pins provide circuit polarization. ontacts are twistpin type and are gold-plated. ousing is molded thermoplastic. Suitable for high-reliability applications where long-term resistance to fretting corrosion is a necessity. 3., 600 Vac, -55 to +50. ow To Order icrostrips with Solid Wire Sample art umber S Series umber of avities ontact Type Single Row icrostrip,.050" ontact Spacing, Solid Wire to 30 Total number of cavities includesv guide pins,latches and mounting holes. The number of cavities equals the number of electrical circuits plus cavity for each guide pin and latch, plus 6 cavities for the mounting hole option. S in ontacts Socket ontacts Wire age 4 - #24 W 5 - #25 W 6 - #26 W Wire Type - Solid opper Wire inish 3 - Solder ipped in 60/40 Tin-ead 4 - old-plated Wire ength (Inches).25, ,.000,.500, Wire ength In Inches ±.200/.000 Omit or o uide in uide in in av. # uide in at oth nds Optional uide in (x) Replace (X) with guide pin location. Optional atch Omit or o atch enter atch 3 shown above: atch at oth nds Optional ounting oles Omit or o ounting oles ounting oles The three cavities on each end are filled with epoxy. Two.062" (.57mm) holes are cross-drilled to allow for attachment to a mounting surface. IX OT: when ordering "" Strip onnector allow for only 3 cavaties on each end (6 total) 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

315 Series 7 icrostrips Single Row Strips with Insulated Wire Single Row icrostrips with Insulated Stranded Wire These.050" pitch single row microstrips are factory-terminated to military-grade hookup wire. rimp termination. vailable with to 30 contacts. Optional latching mechanism prevents de-mating. uide pins provide circuit polarization. ontacts are twistpin type and are goldplated. ousing is molded thermoplastic. vailable with standard 22759/ T wire, or upgrade to 22759/33 space grade wire. Suitable for high-reliability applications where long-term resistance to fretting corrosion is a necessity. 3., 600 Vac, -55 to +50. Wire is 600V, 200. ow To Order Single Row icrostrips with Insulated Wire Sample art umber S Series umber of avities ontact Type Wire age Wire Type Wire olor ode Single Row icrostrip to 30 Total number of cavities includes guide pins, latches and mounting holes The number of cavities equals the number of electrical circuits plus cavity for each guide pin and latch, plus 6 cavities for the mounting hole option. S in ontacts Socket ontacts 6 - #26 W 8 - #28 W 0 - #30 W ote: or 24 gage wire consult factory - Standard Wire xtruded T per 22759/, Silver-lated onductors (#30 W not available) VRS Type 6878/4 (T) - White 5 - olor-oded per I-ST-68 Wires -0 are solid color, -up are striped. - Space rade Wire; igh Strength ightweight rosslinked odified T per 22759/33, Silver-lated onductors 7-0 olor Repeat Wires are solid color per I-ST-68 color code system. Wire ength (Inches) xample: 8 =8 inches +.00/-0.00 (+25.4/-0.0) Omit or o uide in uide in in av. # uide in at oth nds Optional uide in Optional atch Optional ounting oles Omit or o atch Omit or o ounting oles enter atch ounting oles (x) Replace (X) with guide pin location. 3 shown above: atch at oth nds OT: when ordering "" Strip onnector allow for only 3 cavaties on each end (6 total) IX icro- atching icrostrips 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

316 icro- atching icrostrips Series 7 icrostrips Single Row Strips with Insulated Wire IX.083 (2.0) R TY # of avities.300 (7.62).0 (2.79) X I OTOR 2Xø.062 (.57) ().25 (3.8) X WIR T.25 (3.8).083 (2.0) R TY 2Xø.062 (.57) (3.8) (.27) X Table I: imensions SOT OTOR WIR T.062 (.57).35/.6 (3.43/2.95).200 (5.08) R X () ax. () ax. # of avities In. In. In. In. In. In / / / / / / / / / / / / ven umber of avities I OTOR SOT OTOR VITY VITY atch placed on next lower cavity prior to centerline. atch position = (# of avities) 2. enter atch ocations () Odd umber of avities.25 (3.8) I OTOR SOT OTOR VITY VITY atch placed in cavity on centerline. atch osition = (# of avities+) lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

317 Series 7 icrostrips Single Row Thru-ole oard ount Strips 7-004, 7-005, 7-006, and Single Row oard ount icrostrips These.050" pitch single row thru-hole microstrips are available in four typesvertical mount, right angle single row and two right angle staggered versions. vailable with to 30 contacts. tails are.020" diameter. Optional latching mechanism prevents de-mating. uide pins provide circuit polarization. ontacts are twistpin type and are gold-plated. ousing is molded thermoplastic. Suitable for high-reliability applications where long-term resistance to fretting corrosion is a necessity. 3., 600 Vac, -55 to +50. ow To Order Single Row Thru-ole icrostrips Sample art umber Series umber of avities ontact Type Right ngle, Single Row Tails Right ngle, Two Row Tails with.050" etween Rows Right ngle, Two Row Tails with.00" etween Rows Vertical ount to 30 Total number of cavities includes guide pins, latches and mounting holes. The number of cavities equals the number of electrical circuits plus cavity for each guide pin and latch, plus 6 cavities for the mounting hole option. in ontacts S Socket ontacts Tail ength (In.).080,.0,.25,.50,.72,.90,.250 Tail ength In Inches ±.05 Omit or o uide in uide in in avity # uide in at oth nds Optional uide in Optional atch Optional ounting oles Omit or o atch Omit or o ounting oles enter atch ounting oles (x) Replace (X) with guide pin location. 3 shown above: atch at oth nds The three cavities on each end are filled with epoxy. Two.062" (.57mm) holes are cross-drilled to allow for attachment to a mounting surface OT: when ordering "" Strip onnector allow for only 3 cavaties on each end (6 total) IX icro- atching icrostrips 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

318 icro- atching icrostrips WS icrostrips Single Row Thru-ole oard ount Strips 7-004, 7-005, 7-006, and IX.083 (2.0) R TY # of avities.300 (7.62).0 (2.79) X imensions () ax. () ax. # of avities In. In. In. In. In. In / / / / / / / / / / / / VITY I OTOR 2Xø.062 (.57) () ven umber of avities I OTOR SOT OTOR VITY.050 (.27) X.25 (3.8) atch placed on next lower cavity prior to centerline. atch position = (# of avities) 2. enter atch ocations 2Xø.062 (.57).050 (.27) X SOT OTOR.35/.6 (3.43/2.95).200 (5.08) R X VITY.083 (2.0) R TY () Odd umber of avities I OTOR SOT OTOR VITY atch placed in cavity on centerline. atch osition = (# of avities+) (3.8).062 (.57) 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

319 Series 7 icrostrips Single Row oard ount Strips layouts: and rinted ircuit oard ayouts TY I OTOR SOT OTOR Right ngle Single Row.050" (.27) enters Right ngle Staggered.050" (.27) Offset TI T.050 (.27) TY TI T ø.020 (0.5).00 (2.54).400 (0.6) OTT ø.020 (0.5).050 (.27).00 (2.54) (.400) U OTT.00 (2.54) TY.050 (.27) TY ø.020 (0.5).00 (2.54) OTT ø.020 (0.5) OTT.050 (.27) TI T.050 (.27) TY.225 (5.72) TI T.00 (2.54).225 (5.72).00 (2.54) TY.050 (.27) TY IX icro- atching icrostrips 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

320 icro- atching icrostrips Series 7 icrostrips Single Row oard ount Strips ayouts: and rinted ircuit oard ayouts TY I OTOR SOT OTOR Right ngle Staggered.00" (2.54) Offset Vertical ount.00" (2.54) Spacing TI T.00 (2.54) TY OTT.00 (2.54).400 (0.6).050 (.27) TY TI T.20 (3.05).00 (2.54) (.27) ø.020 (0.5).00 (2.54).00 (2.54) OTT.00 (2.54) ø.020 (0.5) ø.020 (0.5).00 (2.54).00 (2.54) OTT TI T.00 (2.54) ø.020 (0.5).00 (2.54) TI T.225 (5.72).00 (2.54) TY.050 (.27) TY.20 (3.05) OTT.00 (2.54).050 (.27) IX 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

321 Series 7 icrostrips Single Row Surface ount Strips Single Row Surface ount icrostrips These.050" pitch single row surface mount microstrips are available with to 30 contacts. ST tails are.03" diameter and are solder dipped in 60/40 tin-lead. Optional latching mechanism provides secure connection. Optional guide pins provide circuit polarization. ontacts are twistpin type and are gold-plated. ousing is molded thermoplastic. Suitable for high-reliability applications where longterm resistance to fretting corrosion is a necessity. 3., 600 Vac, -55 to +50. ow To Order Single Row Thru-ole icrostrips Sample art umber Series umber of avities ontact Type Optional uide in Optional atch Optional ounting oles Single Row icrostrip,.050" ontact Spacing, Surface ount Tails to 30 Total number of cavities includes guide pins, latches and mounting holes. The number of cavities equals the number of electrical circuits plus cavity for each guide pin and latch, plus 6 cavities for the mounting hole option. in ontacts Omit or o uide in Omit or o atch Omit or o ounting oles uide in in avity # enter atch ounting oles S Socket ontacts uide in at oth nds (x) Replace (X) with guide pin location. 3 shown above: atch at oth nds The three cavities on each end are filled with epoxy. Two.062" (.57mm) holes are cross-drilled to allow for attachment to a mounting surface OT: when ordering "" Strip onnector allow for only 3 cavaties on each end (6 total) IX icro- atching icrostrips 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

322 icro- atching icrostrips Series 7 icrostrips Single Row Surface ount Strips IX.083 (2.0) R TY.300 (7.62) # of avities I OTOR.0 (2.79) X imensions () ax. () ax. # of avities In. In. In. In. In. In / / / / / / / / / / / / VITY 2Xø.062 (.57) ().050 (.27) TY ven umber of avities I OTOR SOT OTOR VITY.050 (.27) X.25 (3.8) atch placed on next lower cavity prior to centerline. atch position = (# of avities) 2. TYI SUR OUT OIURTIO #28 W.090 (2.29).045 (.4) enter atch ocations 2Xø.062 (.57).050 (.27) X VITY SOT OTOR.083 (2.0) R TY.050 (.27) TY.062 (.57).35/.6 (3.43/2.95).200 (5.08) R X () Odd umber of avities I OTOR SOT OTOR VITY atch placed in cavity on centerline. atch osition = (# of avities+) (3.8) 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

323 ow To Order Single Row icrostrips With Insulated Wire Sample art umber S Series Single Row icrostrip,.050" ontact Spacing, Surface ount Tails to 30 (See Table I) Total number of cavities includes guide pins, latches and mounting holes. umber of avities The number of cavities equals the number of electrical circuits plus cavity for each guide pin and latch, plus 6 cavities for the mounting hole option. - in ontacts ontact Type S - Socket onnector oth nds S - in onnector to Socket onnector Wire age 6 - #26 W 8 - #28 W 0 - #30 W Wire Type - Standard Wire xtruded T per 22759/, Silver-lated onductors (#30 W not available) - Space rade Wire; igh Strength ightweight rosslinked odified T per 22759/33, Silver-lated onductors Wire olor - White 5 - olor-oded per I-ST-68 Wires -0 are solid color, -up are striped. 7-0 olor Repeat Wires are solid color per I-ST-68 color code system. Wire ength (Inches) xample: 8 =8 inches +.00/-0.00 (+25.4/-0.0) Omit or o uide in uide in in avity # uide in at oth nds (x) Replace (X) with guide pin location. Optional uide in Optional atch Optional ounting oles Series 7 icrostrips Single Row ack-to-ack icrostrips Omit or o atch Omit or o ounting oles enter atch Single Row ack-to-ack icrostrips These.050" pitch single row surface mount microstrips are available with to 30 contacts. Optional latching mechanism provides secure connection. Optional guide pins provide circuit polarization. ontacts are Twistin type and are gold-plated. ousing is molded thermoplastic. Suitable for high-reliability applications where long-term resistance to fretting corrosion is a necessity. 3., 600 Vac, -55 to +50. ounting oles 3 shown above: atch at oth nds OT: when ordering "" Strip onnector allow for only 3 cavaties on each end (6 total) IX icro- atching icrostrips 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

324 icro- atching icrostrips Series 7 icrostrips Single Row Surface ount Strips IX VITY.075 (9.05) VITY (U).075 (9.05).0 (2.79) X T () 2Xø.062 (.57).25 (3.8).075 (9.05) TY.300 (7.62).25 (3.8) X VITY (RT) VITY (U) Table I: imensions TR T () V UR O VITIS T O XT OWR VITY RIOR TO TRI.25 (3.8).075 (9.05) TY VITY (U) TR T () O UR O VITIS VITY (RT).062 (.57).200 (5.08).075 (9.05) X 2Xø.062 (.57).35 (3.43).6 (2.95).25 (3.8) X.075 (9.05) VITY (RT) # Of avities ax ±.005 in. in. in / / / / / / / / / / / / "" VITY 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X ail: [email protected]

325 Index art o. escription age 8353/0 & 02 /0 & /02 Solder up Terminated, etal Shell onnector /03 & 04 /03 & /04 re-wired rimp Terminated, etal Shell onnector /06 & 07 /06 & /07 Solder up Terminated, lastic Shell onnector /08 & 09 /08 & /09 re-wired rimp Terminated, lastic Shell onnector /0 & 5 /0 Thru /5 ondensed Right ngle Terminated onnector /6 & 2 /6 Thru /2 Right ngle Terminated onnector /22 thru 27 /22 Thru /27 Straight Terminated onnector /28 thru 33 /28 Thru /33 ondensed Straight Terminated onnectors /05 /05 ackscrew and ackpost ardware Solder up Solid Wire Insulated Wire Right ngle Tails on.050 Spacing Right ngle Tails with.050 etween Rows Staggered Right ngle Tails with.00 etween Rows Staggered Vertical ount Surface ount Strips onnectors ack-to-ack icrostrips onnectors Shorting lug ssembly Solder up or Tail Terminated; Solder, raze or Weld ount onnectors ront ount I-T-8353 Type, Shell Size Insulated Wire Terminated Solder, raze or Weld ount onnectors Solder up or Tail Rear anel ount onnectors Insulated Wire Rear anel ount onnectors ront ount I-T-8353 Type, Shell Size XX Stainless Steel ackscrew its with lips Solder up onnectors Vertical ount onnectors re-wired with Insulated Wire onnectors in-socket In-ine ilter dapters Right ngle onnectors Rear anel ount Solder up onnectors Rear anel ount Vertical onnectors Rear anel ount Insulated Wire onnectors Rear anel ount ondensed oard Right ngle onnectors ilter dge oard Receptacle ITS ITS I Troubleshooter I/RI Round able ntry ackshells -6 IX icro- ermetic 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X Index- -ail: [email protected]

326 icro- ermetic Index IX art o. escription age I/RI Shield Sock Round able ntry ackshell wik-ty Strain Relief ackshell etal rotective overs with Silicone Rubber asket etal rotective overs with Silicone Rubber asket for Rear anel ounted icro I/RI lliptical anding ackshell etal rotective overs with Silicone Rubber askets otting Shell omposite I/RI Round able ntry ackshell I/RI ual ntry Round able anding ackshell I/RI Split Shell anding ackshell with Screwlocks Round able ntry Strain Relief ackshell with Saddle ar lamps Straight, Top, and 45 ntry I/RI lliptical anding ackshell I/RI lliptical Split Shell anding ackshell Saddle ar Strain-Relief ackshell I/RI lliptical etal Shell ackshell Side ntry I/RI ightweight etal Shell ackshell arshal ean rotective Rubber overs with Tether Rope ombo icro- ilter connector -34 T ack-to-ack able ssemblies -0 T Right ngle rinted ircuit oard eaders -3 T Solder up onnectors -3 T Insulated Wire onnectors -7 nvironmentally Sealed Rear anel ount onnector -23 R Insulated Wire with Right ngle xit onnector -2 asteratch atching icro- onnector -29 Solder up -3 re-wired -6 rinted ircuit oard onnector -9 R 7580 Vertical ount onnector -32 R 7580 ompact lange Vertical ount onnector -40 R 7590 Right ngle ount onnector -36 R 7590 ompact lange Right ngle ount -44 S Solder up, Solid Wire and Insulated Wire onnectors -2 S Right ngle onnectors -5 R Solder up Terminated Rear anel ount onnector -2 R Insulated-Wire Rear anel onnector -4 R Uninsulated Solid Wire Rear anel onnector onnector -6 R-R ondensed oard Right ngle, Rear anel ount onnector lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X Index-2 -ail: [email protected]

327 Index art o. escription age R-S ondensed oard Straight, Rear anel ount onnector -2 SW Spacewire able ssembly with ack-to-ack or Single nded Wiring -27 Solder up ontacts -3 etal Shell Insulated Wire igtails -5 etal Shell Solid Wire Termination -7 etal Shell ack-to-ack ables -9 etal Shell Right ngle rinted ircuit oard - W lastic Shell Solder up Termination -5 W lastic Shell Insulated Wire igtails -7 W lastic Shell Solid Wire Termination -9 W lastic Shell ack-to-ack ables -2 W lastic Shell Right ngle -23 W Solder up onnector -8 W Insulated Wire onnector -0 W ack-to-ack Unshielded able ssemblies -2 W Shielded able ssemblies, Untwisted and Twisted air -4 W Uninsulated Wire onnector -9 W -R oard Right ngle, Thru-ole onnector -0 W2 Sav-on onnector Saver -2 W-S oard Straight, Vertical ount Thru-ole onnector -6 W-R ondensed oard Right ngle ount, Thru-ole onnector -4 W-S ondensed oard Straight.075 Inch Spacing onnector -20 W-SR Right ngle Surface ount onnector -28 W-28 Vertical ount ackplane onnector -3 W-28S Straddle ount ard-dge onnector -4 W-28S Right ngle oard onnectors -5 W-84 Vertical ount ackplane onnector -6 W-84S Straddle ount ard-dge onnector -7 W-84S Right ngle oard onnector -8 W2 re-wired and Solder up onnectors -9 W26 thru 29 uick isconnect icro ircular onnectors -0 nti-static Thermoplastic ust aps and luorosilicone Interfacial Seals -4 Stainless Steel ackpost its, Rear anel or Rear anel for il Spec and ommercial arts -2 Stainless Steel ackscrew its with -Rings for il Spec and ommercial arts -0 IX icro- ermetic 203 lenair, Inc. igh erformance icro- onnectors and ables U.S. ode rinted in U.S.. IR, I. 2 IR WY, X Index-3 -ail: [email protected]

328 Why hoose IR? IR? Outstanding ustomer Service! lenty of Raw aterials! In-ouse ssembly! bundant achining apacity! uge Same-ay Inventory! One of orth merica's and achining

329 State-of-the-rt lating apabilities igh-roduction Injection olding quipment The Industry's ost xperienced I/RI raided Shielding Specialists argest illing Installations lean Rooms for ilter rray and rinted ircuit oard ssembly

330 Out of This World ITROT SOUTIOS lenair, Inc. 2 ir Way lendale, alifornia Telephone: ax: [email protected] lenair ower roducts roup 860. ain Street xtension Wallingford, T Telephone: acsimile: [email protected] lenair U td 40 ower Oakham Way Oakham usiness ark.o. ox 37, ansfield otts, 8 5Y ngland Telephone: acsimile: [email protected] lenair icroway Systems 7000 orth awndale venue incolnwood, I 6072 Telephone: acsimile: lenair ordic ustav III : S oulevard 46 S Solna Sweden Telephone: acsimile: [email protected] lenair lectric mb Schaberweg ad omburg ermany Telephone: 0672 / acsimile: 0672 / [email protected] lenair Iberica / a Vega, Velada Spain Telephone: acsimile: [email protected] lenair Italia S.p.. Via el avoro, uarto Inferiore ranarolo dell milia ologna, Italy Telephone: acsimile: [email protected] lenair rance SR 7, venue armentier Immeuble entral arc # Toulouse rance Telephone: acsimile: [email protected] 203 lenair, Inc. rinted in U.S..

331 I-ROR IRO- OTORS S