Note: This document wh_informatics_practical.doc and supporting materials can be downloaded at

Transcription

1 Woods Hole Zebrafish Genetics and Development Bioinformatics/Genomics Lab Ian Woods Note: This document wh_informatics_practical.doc and supporting materials can be downloaded at (or) Setting the stage: These tasks each pertain to the mutation that we (virtually) mapped in lab. The curved body axis and U-shaped somites observed in these mutants are hallmarks of disrupted slow muscle development, and similar phenotypes are observed in mutants with defects in Hedgehog signaling. General descriptions of the four tasks are provided below. Specific protocols can be found following this introductory section. Each of you should choose (at least) one task to accomplish, and collaboration is encouraged. Task 1: High resolution mapping, sequencing, and expression Overview: From a rough map position, refine the critical interval via (virtual) high resolution mapping with additional markers. Query the critical interval in the zebrafish genome for potential candidate genes. Find expression patterns online for these candidates. Design primers to sequence candidate genes for the mutagenic lesion or for additional SNPs to use in mapping. Task 2: Clone candidate enhancer/promoter sequences to create a transgenic reporter line Overview: Identify the translational start site of a gene of interest. Obtain ~ 6kb of sequence upstream of this site. Design PCR primers that will amplify this region, and clone it in-frame with GFP in a tol2 expression vector. Identify BACs for use in creating reporter constructs via homologous recombination or gap repair. Identify evolutionarily conserved sequences from other organisms to uncover potential regulatory regions around your gene of interest. Task 3: Morpholinos, rescue, and expression analysis Overview: Find the zebrafish ortholog of your favorite gene. Find its location in the genome, locate the ATG, and identify the exon-intron boundaries. Design two 25-base morpholino sequences that target (1) the ATG and (2) an exonintron boundary. Identify an orthologous gene in another species for use in rescue experiments to control for morpholino specificity. Align this sequence with

2 your morpholinos to determine degree of potential activity. Obtain a full-length clone of the zebrafish gene (via RTPCR or clone collections) for use in overexpression experiments or expression analyses via in situ hybridization. Task 4: Identifying zebrafish transcripts via Batch sequence retrieval and BLAST Overview: Mine OMIM (Online Mendelian inheritance in Man) for genes related to the Hedgehog signaling pathway. Get amino acid sequences for these genes, and identify (via batch BLAST) the zebrafish orthologs for these proteins. Use a simple Perl script to parse the blast results to see where the genes are located in the zebrafish genome. Finally, find out where a few of these genes are expressed (via zfin). Protocols: Task 1: High resolution mapping, sequencing, and expression 1. The mutation we mapped in lab is flanked by SSLP/Zmarkers Z13936 and Z3057. Generate a list of SSLP markers that are localized in this interval: Start at the zfin homepage. Follow link for Genetic Maps. Uncheck all panels aside from MGH, and enter Z3057 in the search box. On the map viewer page, zoom out as far as possible. Where is Z3057 located on Chr. 7 (see the cm numbers on the left side of the map). Where is Z13936 located? Roughly how many SSLPs are available from this interval? 2. Find primer sequences for one of these markers (Z15270). From your map in #1, locate Z15270 and click on it. This takes you to the ZFIN page for this marker. Click on the GenBank link, which takes you to the GenBank page for this zebrafish sequence. Locate the FASTA link and click it, which takes you to a page where the sequence is located. Copy this sequence to the clipboard on your computer. Now to go the Primer3 website. Paste in your sequence and select a length of Hit Pick Primers and retrieve your primer sequences.

3 3. You collect hundreds of mutants for use in a high resolution mapping panel, and test them for linkage to numerous SSLPs from your region. You find that the SSLP Z15270 is the marker that is most tightly linked to your mutation, but some recombinants remain. Query the zebrafish genome assembly to see a model of your region of interest (the assembly is pretty good on a large scale, but can be misleading in a local region). Go to the Ensembl website. Follow the link for zebrafish, and then for BLAT search. Paste in the sequence for Z15270 that you collected in step 2, and click Run. On the resulting page, scroll down until you see a link for C, which stands for Contig, and click the link. This takes you to a view of the chromosome. Click on the Configure this page link on the left hand side of the page. Here you ll find all sorts of tracks you can turn on and off to show different kinds of information. Make sure the marker track is turned on. Save and close the configuration window by hitting the checkmark in the upper right, and zoom out in the browser as far as is allowed. 4. Exploring the genomic region what do these genes do? Click on some of the genes found in the region, taking you to the gene record page. Find and click the orthologs link on the left hand side of the page for each gene. What kind of gene is CR457482? 5. Go back to the genomic view. Can you get a link to ZFIN for any of these genes? Click on rras2. Your mutant has defects in muscle specification is the expression pattern of rras2 consistent with a role in muscle? 6. You decide to sequence rras2 in wildtypes and mutants to see if (1) you can find a SNP to map to rule this gene out via recombination, and (2) you can find a change in the mutant sequence that might cause a loss-of-function phenotype. Design primers that will amplify a 600 bp PCR product that contains the first exon of rras2. Find the rras2 entry in ZFIN (you are probably already there in step #5). Go to the ZFIN homepage: Click on Genes/Markers/Clones and enter rras2. On the ZFIN gene page, scroll down and follow the link to the Genbank/RefSeq RNA record. Scroll down and note the coordinates of the coding sequence (CDS) in the entry. Copy the coding sequence onto the clipboard. Go to the UCSC genome browser (you can also do this on the Ensembl browser, but the UCSC interface is a bit friendlier for this task):

4 Click on the BLAT tab, and paste in your sequence. Select Zebrafish from the Genome pulldown menu, and click Submit. Follow the link for details on the first BLAT hit. Scroll up and down to check your results what to the different color-codings mean in your sequence? Select about 600b of sequence from which to design primers, then head to the primer3 website: Paste in your sequence, choose a size range of b (about the limit of a sequence trace from a PCR template), and click Pick Primers. 7. You PCR from genomic DNA of wildtypes and mutants, and sequence the PCR products. The sequencing results are as follows: >wildtype_rras2_exon1 AGGCGGGAGTGTGAGCGCGCGCCCCCTCGCGCCCGCCGCGCGCACTGCCAGCACTGATTAGCCGTATCTTCCCCTCATCTTGCAGCACAGGCAGTCAGTCAGTGCCTGGTAGCGATTTG GACGAGGGCGTATGGACTTGAAGCAGCAGTGTATGCATTTCCCACAGACTGTGGTCGTACTTTTCTCCTGTCGGACGGATTACCACTGAGTTGACACATAGCCCAAAAGCCGCTTCGCA TTTTTTCCGCTGCATTTCTCTAACTGAAGGCCTGTCACAGAGTAAAGTGGCTCGGTGTGCGTGTGTTTAGACAGCGGAGCGAGAGCAGCAGTGTGTCCCCGATGGCTGGCTGGAAGGAC GGCTCAGTGCAGGAGAAATATCGCCTGGTGGTCGTCGGAGGTGGTGGCGTCGGAAAATCAGCGTTAACCATCCAGTTTATCCAGGTAAGCGGATACATGGCGGAATGTTATGTGGTTTT CGGCCCTTTAAAAAGATGTGAGGGTGTTGAGGAGAAATGCGTGGATCTTGCTCACAGAAATGGGGACCCCATGAGCGGAAAAGGGGGTTCAGGAATCCAAGCTAGGCCTGCGACACTTT AAACC >mutant_rras2_exon1 AGGCGGGAGTGTGAGCGCGCGCCCCCTCGCGCCCGCCGCGCGCACTGCCAGCACTGATTAGCCGTATCTTCCCCTCATCTTGCAGCACAGGCAGTCAGTCAGTGCCTGGTAGCGATTTG GACGAGGGCGTATGGACTTGAAGCAGCAGTGTATGCATTTCCCACAGACTGTGGTCGTACTTTTCTCCTGTCGGACGGATTACCACTGAGTTGACACATAGCCCAAAAGCCGCTTCGCA TTTTTTCCGCTGCATTTCTCTAACTGAAGGCCTGTCACAGAGTAAAGTGGCTCGGTGTGCGTGTGTTTAGACAGCGGAGCGAGAGCAGCAGTGTGTCCCCGATGGCTGGCTGGAAGGAC GGCTCAGTGCAGGAGAAATATCGCCTGGTGGTCGTCGGAGGTGGTGGCGTCGGAAAATCAGCGTTAACCATCCAGTTTATCCAGGTAAGCGGATACATGGCGGAATGTTATGTGGTTTT CGGCCCTTTAAAAAGATGTGAGGGTGTTGAGGAGAAATGAGTGGATCTTGCTCACAGAAATGGGGACCCCATGAGCGGAAAAGGGGGTTCAGGAATCCAAGCTAGGCATGCGACACTTT AAACC You wish to know if these sequences harbor any polymorphisms, and whether you can use these polymorphisms to facilitate your high resolution mapping. Align the two sequences via BLAST2: Follow the link for nucleotide blast, and check the box for Align Two or More Sequences. Note the points at which the two sequences differ. Next, you d like to see if the polymorphisms can be distinguished via restriction digest. Paste about 40b of wildtype and mutant sequence flanking the SNP into the dcaps website, leaving the mismatches field blank. Are there enzymes available that will cut wildtype but not mutant sequence (or vice versa)? If a SNP does not have a polymorphism, try entering 1 in the mismatch field what does this accomplish? 8. Finally, do the SNPs result in changes in the coding sequence for rras2? Task 2: Clone candidate enhancer/promoter sequences to create a transgenic reporter line

5 1. Eventually you identify the mutation as a lesion in the gene scube2. You wish to analyze the morphogenetic movements of cells expressing this gene during development in live embryos. To accomplish this, you decide to make a GFP reporter line that reflects the endogenous expression of this gene. As a first attempt, you plan to clone genomic sequences upstream of the ATG of this gene and put them into a tol2 GFP expression vector. First, locate this gene in the genome and retrieve the coding sequence: go to the zfin homepage, click on Genes/Markers/Clones, and enter scube2 in the search box. Follow the gene link to the ZFIN record for this gene, and scroll down the page. Where (which chromosome) does ZFIN say this gene is located? 2. Next, you want to retrieve the nucleotide sequence of this gene to (1) compare it with the genomic sequence, and (2) identify the translational start site. Scroll down the ZFIN page until you find the link for RNA. Follow this to the GenBank record for this gene. Scroll down to the sequence information at the bottom of the page. Where does the coding sequence (cds) begin and end within the complete mrna transcript? Find the ATG in the nucleotide sequence. Beginning at the ATG, copy about 100b of nucleotide sequence to the clipboard and head to the Ensembl Genome Browser for Zebrafish. Enter scube2 into the search box. On the resulting page, click on Location. Which direction is the gene transcribed (ie. which strand is the coding strand)? By high resolution genetic mapping, you localized the SSLP Z15270 to be 0.1 cm from the mutation in scube2. Z15270 is on chromosome 7 at about 28,880,000. The genetic map length of the zebrafish genome is 3000 cm total, and the total physical length of the genome is 1.7 x 10 9 bp. Is the actual physical (basepair) distance between Z15270 and scube2 surprising? What factors might account for any differences in expected distance? Zoom in and move the window (by pressing the < and > buttons) so that the first exon encompasses the entire view. Resize the window to include about 5 kb of upstream sequence (just add 5000 to the righthand number in the location box). Would grabbing 5 kb of upstream sequence be a good idea to make a reporter construct for scube2? You decide to retrieve all intergenic sequence and test various parts of it for enhancer activity. First, resize the browser window to just include this intergenic sequence. Click the link for export data on the left hand side of the page. Pull

6 down soft repeat masking in the genomic FASTA options, and hit next. Then click the text link to get the sequence. Copy the DNA on to the clipboard, then go to the Primer3 website to design primers, trying to get as much of the input sequence as possible into the PCR product. To clone this bit of DNA, you would add appropriate restriction enzyme (or Gateway) sequences to the primers, PCR amplify, and hop into your favorite GFP expression vector. 3. You successfully make this vector and inject it into 1-cell stage embryos. The GFP expression in injected fish (aka. transients ) is promising the pattern of GFP expression in a few fish roughly matches what is observed via in situ hybridization. In addition, many other tissues express GFP. Encouraged by this result, you raise the embryos to adulthood and cross them to identify founders. You identify ten founders, but none of your lines express GFP in a pattern consistent with the in situ data: expression in some tissues is absent, and many tissues express GFP where the gene is not normally expressed. How might you explain these results? You decide to make a new reporter line by BAC recombination: you will obtain a large (~200kb) chunk of genomic DNA that contains this gene, and replace the first exon of your target gene with GFP. Why might this strategy result in GFP expression that more accurately recapitulates the endogenous expression pattern? You use three approaches to identify a BAC that contains your favorite gene: (1) directly from the Ensembl genome browser, (2) via a BLAST search at NCBI, (3) via the physical map / contig viewer of the genome assembly. 3a. Go to the Ensembl home page for zebrafish: Enter scube2 in the search box and click Go. Follow the link for Region in detail. Look at the Location pane in the browser page what is written in the blue bar in the center of the page? If a region of the assembly is represented by a sequenced BAC, there will be a GenBank accession number (eg. AL845363) in this blue bar. By contrast, if the region is represented by whole-genome shotgun traces, you will see something like Zv9_scaffold12345 in the middle bar. Turn on the BAC ends track (if not already on) by clicking Configure this page (Other DNA Alignments) on the left hand side. Zoom out until you can see connected BAC ends (represented by horizontal blue bars). Are there any good

7 options for BACS that contain the scube2 coding sequence and putative regulatory regions? 3b. Retrieve the GenBank accession number for scube2 again from ZFIN, then go to the NCBI BLAST homepage: Click nucleotide blast, enter the accession number in the search box, select nr button from the pulldown menu, and type in Danio rerio in the organism box. Hit BLAST. On the results page, genome sequence will be annotated as Zebrafish DNA sequence from clone. Are there any BAC clones that cover the entirety of the scube2 sequence? You next decide to align the coding sequence with one BAC sequence to check for overlap. Note the accession number of the BAC, and go to the BLAST2 page: => select nucleotide blast and click the Align two sequences box Enter the accession number for the coding sequence in the top box, and for the BAC in the bottom box, and hit Align. Where does the coding sequence (ie. query) begin and end in the BAC sequence? Hit the Dot Matrix view for a graphical look. 3c. Finally, you decide to check the zebrafish fingerprint contigs / physical genome assembly to explore BACs in the neighborhood of scube2. Search for DKEY-181F22 (this is the second best BLAST match from the NCBI blast in 3b). The resulting page will tell you where in the sequencing pipeline this BAC falls, the degree of overlap between BACs, and whether other sequences are available. The next steps would involve creating a targeting vector for homologous recombination. In this case, you could PCR sequences (1 1.5 kb) that flank the region you wish to replace with GFP (generally the first exon), and clone these into a vector containing GFP and a selectable marker (eg. kan) that is not present in the destination BAC. 4. As a final step, you wish to identify candidate regulatory sequences by comparing genomic sequences from multiple teleost species. This can be accomplished via the VISTA webserver: First we will need to collect genomic sequences from other fish. In this example we will use three fish in which both genomic sequences and chromosome

8 assignments are available: Tetraodon nigroviridis (Green-spotted pufferfish), Gasterosteus aculeatus (3-spined stickleback), and Oryzias latipes (medaka). The whole-genome duplication event in the teleost lineage can make definitive orthology assigments a bit tricky. Clues to the correct ortholog can be gleaned from analyzing conserved syntenies, in which gene content on particular chromosomes has been retained after species divergence. A useful viewer of conserved syntenies in multiple organisms can be found at the Oxgrid website: By selecting the appropriate species comparisons, you can view chromosomes and chromosome segments in which gene content has been conserved. Which regions of the stickleback, medaka, and pufferfish genomes most closely match zebrafish chromosome 7? Find the orthologs of Scube2 in these species by performing BLAT searches at the UCSC genome website, using the peptide sequence of Scube2 as the query. In the resulting browser page for each BLAT search, expand the window size to include ~ 10kb of upstream and downstream flanking sequences. Note the orientation of the gene (+ or strand), and export the genomic DNA via the DNA tab. Save these sequences on to your desktop. They may need to be edited to retain FASTA format you can do this in Notepad, TextEdit, or via a commandline editor such as emacs. Note I ve collected these sequences for you here, if you don t want to do all of the searching: Next return to the VISTA homepage, choose mvista, select 4 sequences to align, and upload your sequences to the VISTA server. View both the visual alignments as well as the textual alignments. Since we collected about 10kb of upstream sequence for each fish, the exons should begin to align at 10k. Can you see where the exon sequences are? Are there conserved noncoding sequences present as well? You may want to adjust the conservation parameters a bit, to see if you can get more sequences to show up as conserved. Task 3: Morpholinos, rescue, and expression In midline patterning, Hedgehog signals emanate from the notochord and ventral neural tube. Though loss of function of scube2 recapitulates many defects observed in Hedgehog pathway mutants, scube2 expression in the neural tube is confined to dorsal regions. This expression pattern is reminiscent of Boc, a gene involved in Hedgehog signaling in mouse. You wish to analyze the zebrafish ortholog of this gene at the level of expression and function.

9 1. As a first step, you search for the zebrafish ortholog of Boc. Start at the NCBI home page: Select Genes from the Search menu, and type in Boc. Scroll down until you see the first mouse record, and follow its link. On the resulting page, scroll down to the bottom to find the link for the amino acid sequence. Follow this link to the GenPept record for the protein. Scroll down and copy the amino acid sequence into your clipboard. Now go to the BLAST home page: Follow the link for tblastn, paste in the sequence, select nr and type in Danio rerio. While this search is running, hit the back button and select est_others from the database menu. These two simultaneous searches will ensure that all available coding sequences will be searched. You can access all of your ongoing BLAST searches via the Recent Results tab. On the BLAST result page, follow the U links to the UniGene record are the top EST and the top RefSeq part of the same UniGene cluster? 2. Next you d like to obtain a clone of zebrafish boc to use in expression analysis via in situ hybridization. You can follow several avenues: (1) obtain a clone from a commercial source or another laboratory, (2) make a clone via RTPCR, or (3) screen a cdna library via hybridization. We ll focus on the first two possibilities here. Clones that are commercially available are labeled with an IMAGE ID. Ideally, you would like a full-length sequence that you could use for rescue or overexpression experiments, but partial sequences are fine for generating in situ probes. Search for IMAGE on the UniGene page for boc. Compare these sequences with the NM_XXX sequence (these generally represent full-length cdnas). Do any of the IMAGE clones represent full-length cdnas? You can order IMAGE-ID d clones from Open Biosystems: 3. Next, design primers that will allow you to amplify a full-length clone via RT-PCR for mrna overexpression/rescue experiments. Follow the NM_XXX link from the UniGene page for boc. Scroll down, highlight and copy the nucleotide sequence, then paste it into primer3. Choose a size range that is sufficient to include the entire cds. Do your primer sequences flank the translational start and stop codons?

10 4. You d also like to design morpholino oligonucleotides (MOs) that target the translational start site and a splice junction. First, compare the coding sequence with the genomic sequence to find the ATG and the exon-intron boundaries. There are several ways to do this, including (a) the GenBank record, (b) exporting sequence from a genome browser (ensembl or ucsc), and (c) BLAST searches on genomic traces or sequenced BACs. 4a. The GenBank browser will often have 5 UTR sequences that can be used to design an ATG-binding MO. Where does coding sequence of boc begin? Check the GenBank record for NM_ and look for cds. 4b. Go to the ensembl blast page and paste in the sequence for boc. In the Select Species box, select Danio rerio. Examine the alignment overview on the results page. Is the whole gene aligned to the genome? You can now zoom in on the first exon of boc, extract sequence, and design your morpholino. Similarly, you can design splice-blocking morpholinos by finding the exon-intron boundaries in the browser. 4c. Go back to the GenBank record for zebrafsh boc (from Step 2), and copy the 5 part of the coding sequence plus about 30b of 5 UTR sequence to the clipboard. Next, BLAST this sequence against the nr database: (select nr and Danio rerio). Examine the blast hits and attempt to find a gdna hit. How are the exon-intron boundaries depicted in the BLAST results? Download a BAC that contains the third exon-intron boundary. Locate the coding sequence in this trace by blast two sequences. (select blastn, and check box for compare two sequences ) If the orientation of the BAC is reversed compared to the coding sequence, you can create a reverse complement online: From this alignment, select a 25b region from the WGS trace surrounding the exon-intron boundary and generate a MO. How can you test to see if your morpholinos are successfully inhibiting function of your target gene? 5. Finally, you would like to control for specificity of your morphant phenotype by rescue via injection of an mrna to which your morpholinos will not bind. You head to the pet store and acquire a Green-spotted pufferfish (Tetraodon nigroviridis), grind it up in liquid nitrogen, and extract total RNA. Your plan is to identify the ortholog of boc in Tetraodon, clone this sequence via high-fidelity

11 PCR, generate mrna via in vitro transcription, and inject this mrna into morpholino-treated zebrafish. First, return to the mouse GenPept page for Boc (from Step #1). Copy the sequence into the clipboard, and return to the UCSC Blat page. Paste in the sequence, and select Tetraodon from the species menu. Hit Submit, and then follow the link for browser view. Zoom out until the full Tetraodon sequence is shown. How does your BLAT query compare with the Tetraodon genome? Click on the Tetraodon Gene within the browser window this will take you to a page in which it will be possible to export the predicted gene and peptide sequences. Copy the amino acid sequence, and paste it into blast2, along with the mouse Boc peptide sequence. (select blastp, and check box for compare two sequences ) Is the full mouse sequence matched by the Tetraodon sequence? How does the Tetraodon sequence compare with zebrafish boc? Which chromosome contains boc in Tetraodon? Does this make sense via conserved synteny? Check the OxGrid website: The next step is to design primers to amplify Tetraodon boc via RTPCR. The predicted gene sequence does not include 5 and 3 untranslated regions, which does not leave much wiggle room for designing effective primers. You can collect putative UTR sequences from the genome. Go back to the UCSC BLAT page for Tetraodon, and paste in the predicted cdna sequence. On the results page, follow the link for details and scroll down until you see the alignment with genomic cdna. Collect about 80b of genomic sequence up and downstream of the Tetraodon boc gene, and make a new sequence that includes these putative UTR sequences. Enter this sequence into Primer3, and pick primers that will flank your coding sequence. Next, you ll amplify by high-fidelity PCR, clone into an expression vector, and verify the clone by sequencing. How do the morpholino sequences you designed match up with the Tetraodon boc sequence (compare with blast2)? Will Tetraodon boc mrna escape morpholino-induced knockdown? Task 4: Batch sequence retrieval and BLAST (just a bit advanced) A. Collect sequences for human proteins with hints of hedgehog interactions

12 1. Go to the NCBI website: 2. Click on OMIM this will take you to 3. Enter SHH in the search box finds any record that mentions SHH. 4. Select Protein links from the Display pulldown menu finds all proteins mentioned in the OMIM descriptions 5. Many proteins are found, so we ll narrow the list to a more manageable number. Select Homo sapiens from the species list. 7. Select FASTA (text) from the Display menu this retrieves the amino acid sequences. 8. Select 200 from the Display menu. [you can skip steps 9-11 by downloading the sequence file from my website:] 9. Build up a file of FASTA sequences and save to your desktop. 10. Repeat for the other pages of results (getting the sequences 200 at a time). 11. Open a terminal window and move to the desktop B. Performing a local BLAST search on a batch of sequences 1. Go to the BLAST homepage at 2. Click on the help tab 3. Follow the link for Download BLAST Software and Databases 4. Follow the link for the ftp site, and click the "blast" link appropriate to your platform (eg. macosx-universal) 5. The download will result in a folder saved somewhere on your computer (depending on your preferences). [OPTIONAL, CAREFUL!]: update your command line path (in your bash.profile on macosx) to point to the blast executables cd ~

13 emacs.profile [add a line at the end of the profile that says] PATH= path-to-blast-commands:$path eg PATH= /pathtoexecutables/:$path 6. Now we ll download all current zebrafish transcripts (known and predicted) from Ensembl). While in the same folder as your protein sequences, connect to the ensembl ftp site. ftp ftp.ensembl.org (login as anonymous with your address as password) cd pub/release-67/fasta/danio_rerio/cdna 7. Fetch all the sequences and disconnect: mget Dan* (answer y at the prompts) bye 8. UnZip the sequences and concatenate them into one file, and move this file into your BLAST folder: gunzip Danio* cat Danio_* >> Zv9_release67_transcripts.fa mv Zv9_release67_transcripts.fa ~/Documents/blast/ (change to point to your blast folder) 9. Make a BLASTable database from these zebrafish sequences (type makeblastdb help for options of makeblastdb):./bin/makeblastdb in Zv9_release67_transcripts.fa dbtype nucl [you may need to type./bin/makeblastdb... depending on whether you ve updated your PATH to point to the blast executables] 10. Now you re ready to do a blast search. In your terminal app, navigate to the folder created when you downloaded blast. You can always type [command] help (eg tblastn help ) for blast options:./bin/tblastn -query shh_peps.fa -db Zv9_release67_transcripts.fa -num_descriptions 2 - num_alignments 2 -evalue 1e-5 -out shh_v_zv9transcripts.tblastn & [It will take awhile (~1h) to compare our ~2000 human proteins with the entire database of known and predicted zebrafish transcripts. To save time, get the blast output shh_v_zv9transcripts.tblastn from the course website] you can check on the progress of the blast search: less shh_v_zv9transcripts.blast (type q to quit out of less) 11. When the BLAST search is finished, parse it with one of my hacktastic perl scripts (wh_blast.pl) downloaded from my website. Import the results into excel

14 (comma-delimited) and sort by chromosome and map position does anything map to Chr 7 near Z15270 (28,880,000)? perl wh_blast.pl shh_v_zv9transcripts.blast > blast_output.csv 12. Choose ENSDART Look at Ensembl record: What is the cdna sequence of this gene (click on cdna on the left part of the page). What is the function of this gene? Click on the Orthologs link for some clues. 14. Find expression data (if it exists) in one of two (or more) ways: a directly from ensembl browser if gene expression is turned on under configure this page / Other DNA alignments b from sequence: get sequence from ensembl transcript page. Find the GenBank accession number for this sequence by BLAST (usually on nr, zebrafish; but can do EST blast if no refseq record). Lookup zfin record for this accession number. Go to BLAST homepage Select nucleotide blast Select the nr button, and type Danio rerio in the organism box. Paste in your sequence and hit BLAST Take the accession number of the top hit and do a search at ZFIN. Click on Genes/Markers/Clones and do the search.