2015 JOBSITE EQUIPMENT RENTAL RATES
|
|
|
- Brianna Cunningham
- 8 years ago
- Views:
Transcription
1 2015 JOBSITE EQUIPMENT RENTAL RATES Effective May 14, 2015 HOISTING & RIGGING WEEKLY 4 WEEKS Chainfall (CERTIFIED) Rates listed are based on 20' lift * Lifts available up to 100 ft. 1/2 ton Ton /2 Ton Ton Ton Ton Ton /2 Ton Ton Ton 495 1,475 Puller (CERTIFIED) Rates listed are based on 5' chain * Length available up to 20 ft. 3/4 Ton /2 Ton Ton Ton Air Hoist (CERTIFIED) Lifts available up to 150 ft. 1/2 Ton 70 ft Ton 40 ft Ton 40 ft Ton 100 ft ,468 6 Ton 40 ft ,854 Electric Hoist (CERTIFIED) Lifts available up to 150 ft. 1/2 Ton, 110 V 50 ft Ton, 110 V 40 ft Ton, 110V 40 ft Ton, 110/220 V 60 ft Ton, 575 V 3PH 60 ft ,025 5 Ton, 575 V 3PH 50 ft ,350 Trolley & Beam Clamp (CERTIFIED) 1 Ton Ton Ton Ton Ton Tugger / Winch (CERTIFIED) Cable sold seperately Tugger, Air 1,100 lb ,000 lb Winch, Electric 110 V 3,000 lb Snatch Block Up to 8 Ton Yarding Block Up to 4 Ton Plate Clamp Up to 3 Ton Tirfor (CERTIFIED) 1650 lb. Capacity Cable sold seperately lb. Capacity lb. Capacity Jobsite Industrial Rental Services 2015 Rental Rates - Page 1 of 11
2 MATERIAL HANDLING / MACHINERY MOVING WEEKLY 4 WEEKS EME Aluminum Gantry Cranes (CERTIFIED) Beam Lengths available up to 30 ft. * All cranes c/w trolley & beam up to 15 ft. 2200LW 2,200 lb cap, " lift range 453 1, M 4,400 lb cap, 66-90" lift range 453 1, R/T 4,400 lb cap, " lift range 453 1, R 6,600 lb cap, " lift range 567 1, R 11,000 lb cap, " lift range 824 2, R 22,000 lb cap, " lift range 1,900 4,995 Extra Beam Trolley * See reverse for detailed specifications Material Lifts (CERTIFIED) 10 ft. 1,000 lb ft. 400 lb ft. 350 lb. Counterweight ft. 800 lb ft. 650 lb ft. 800 lb ft. 650 lb Fork Extensions Pipe Cradle Boom Attachment Tray Attachment Roust-A-Bouts 15 ft. 1,500 lbs ft. 1,500 lbs ft. 1,500 lbs Extension Tee Pallet Trucks 5,500 lb. Standard ,000 lb. Standard ,500 lb. Narrow Aisle (21") ,500 lb. 5 ft / 6 ft Forks ,000 lb. 8 ft Forks Machinery Moving Stair Climber 1,500 lb ,200 Push Cart 4 Wheel, 30 x 60, 2,000 lb. cap, (Flat Free) Engine Hoist 2 Ton Appliance Cart 1,200 lb Forklift Boom Extension 5 Ton Forklift Dumper Box 1 Cu.Yd Lifting Cage (Engineered) 3,000 lb. cap. 35x40x24" Wheel Dolly 1,800 lb Corner Dolly 2,400 lb Furniture Dolly 800 lb Rol-A-Lift Jack 2,000 lb. cap. (pair) c/w Straps ,000 lb. cap. (pair) c/w Straps ,000 lb. cap. (pair) c/w Straps Roller Conveyor 10 ft. section c/w Legs Swivel / Straight Skate 10/15 Ton cap Steerable Poly Skates 48 Ton cap. (Set) Swivel / Straight Skate 30 Ton Straight Skate 40 Ton Straight Skate 100 Ton Pry Dolly 4,200 lb. cap Micrometer Outside 0" - 6" Outside 6" - 18" Outside 18" - 30" Inside 2" - 32" Dial Indicator Magnetic Base for Dial Indicator Dynamometer (calibrated) Digital, 10 Ton w/ Shackle Digital, 25 Ton w/ Shackle Digital, 50 Ton w/ Shackle 399 1,194 Jobsite Industrial Rental Services 2015 Rental Rates - Page 2 of 11
3 JACKS WEEKLY 4 WEEKS Mechanical Ratchet Toe 5 Ton Ton Ton Reel, Screw 2500 Lb. 46" - 96" Reel Dia Reel, Ratchet 3750 Lb. 56" - 90" Reel Dia Ton, 20" - 60" Reel Dia Ton, 20" - 96" Reel Dia Ton T Base, 36" - 84" Reel Dia Hydraulic Toe 20 Ton 1" min / 6-5/16" stroke * Single Acting Closed Height / Stroke 10 Ton 1-5/8 / 7/16 (pancake) /4" / 2-1/8" /4" / 4-1/8" /4" / 6-1/8" /4" / 10-1/8" Ton 2" / 7/16" (pancake) /8" / 1-3/4" Ton 6-1/2" / 2" /8" / 4" /4" / 6-1/4" /8" / 14" Ton 2-5/16" / 1/2" (pancake) /8" / 2-7/16" " / 2-1/2" (hollow) /4" / 8-1/4" Ton 6-3/16" / 5/8" (pancake) /16" / 2-3/8" /8" / 6-1/4" Ton 9-11/16" / 3" (hollow) /4" / 6" (hollow) Ton 3-1/8" / 5/8" (pancake) Ton 3-3/8" / 5/8" (pancake) /16" / 2-1/4" /16" / 6-5/8" Ton 8-1/8" / 2" (locknut) Ton 13-1/2" / 5-7/8" (locknut) 485 1, Ton 15-1/2" / 5-7/8" (locknut) 720 2,160 Pumps c/w 6' Hose Hydraulic Hand cu.in Electric Hydraulic 110V 1/2 hp 2 Gal V 1-1/2 HP 5 Gal Manifold System ASSEMBLED TO SUIT Hydraulic Hose 20 Ft. 10,000 PSI Ft. 10,000 PSI WELDING WEEKLY 4 WEEKS Fume Extraction * All Smoke/Fume Extractors c/w Washable Filters (Hepa Filters Available) Smoke Eater Suitcase, 160 CFM Precipitator Swing Arm, 1,400 CFM Engine Driven Gasoline Amp Portable Propane 305 Amp w/ Cart Diesel 300 Amp w/ towable trailer Amp w/ towable trailer Amp w/ air comp (60 SCFM), trailer 637 1,273 Exhaust Scrubber Diesel / LPG Jobsite Industrial Rental Services 2015 Rental Rates - Page 3 of 11
4 Electric MIG Welding 110V LN25 Wire Feeder c/w Flowmeter, Hose Stick Welding Voltage / Phase 150 amp, / 1, Maxstar amp, / amp, / 1-3, Inverter amp, Multi-Weld Distribution Box, Multi-Weld amp, / 1-3, Inverter amp, / 3, Inverter amp, / amp, / amp, / 3, Inverter Pack Frame w/ distribution panel Tig Welding 150 amp, / 1, Maxstar STL/STH Tig Torch 150 amp c/w Flowmeter, Hose, Thumbtrol amp c/w Flowmeter, Hose, Gas Valve Accessories Welding Cable 1/O 50 ft ft Ground Clamp w/ Whip Stinger w/ Whip Remote Control 100 ft ft. extension cable /60 Amp Plug Splitter Panel 600V Distribution Panel 15 kva, 600V 3 PH - 120/240 1 PH Pipe Positioner 110V, 150lb Vertical / 300lb Horizontal Rod Oven 10 lb lb lb Cutting Arc Air Gouger c/w Welding Whip, Air Whip Oxy/Acet. Cutting Outfit c/w torch, 50' hose, regulators Bottle Cart Single / Double LPG Tiger Torch c/w Regulator, 25 ft. hose, 250 KBTU Radiograph Cutter c/w Torch, 6 ft.track Track for Radiograph 6 ft PIPE BENDING WEEKLY 4 WEEKS Mechanical Hand Bender 1/2" - 1" Rigid / 1/2" - 1-1/4" EMT Hand Tube Bender 3/8" - 3/4" O.D. Tubing /2" - 1" Rigid /4" - 1-1/2" Rigid /2" - 1-1/2" Rigid / 3/4" - 2" EMT Electric Tubing Bender 1/2" - 1-1/8" O.D. Tubing /2" - 2" Machine only, 110V /2" - 2" Rigid Shoe Group /2" - 2" EMT Shoe Group /2" - 2" PVC / Rob Roy Shoe Group PVC Heater / Bender 1/2" - 2", 110V /2" - 4", 110V Hydraulic Bus Bar 4 Bender 3/4" x 4" /2" - 2" Rigid /4" - 2" EMT /2" - 4" Rigid / EMT One Shot / MBT Bending Table for Pipe not included Electric Hydraulic Pump High speed, 2 Gal., 110V Jobsite Industrial Rental Services 2015 Rental Rates - Page 4 of 11
5 PIPE FABRICATION WEEKLY 4 WEEKS Pipe Bevelling Bevelling Bands Up to 42" Crawler Manual, 9 ft. - 14' whip w/ Torch Motorized, 110V w/ Torch George Fischer Machine Cut & Bevel up to 4" (blade extra) Ridgid B-500 Cold Bevel Pipe 4" and Larger Manual Cutting 2-A 1/2" - 2", 1 Wheel A 3/4" - 2", 4 Wheel S 2" - 4", 1 Wheel S 2-1/2" - 4", 4 Wheel S 4" - 6", 1 Wheel S 4" - 6", 4 Wheel S 6" - 8", 4 Wheel S 8" - 12", 4 Wheel Soil Pipe, 1-1/2" - 6" RT3422 Hot Tap, 3/4" - 2" NPT Hydraulic Cutting /2" - 8" w/ Foot Pump, 2 Support Rollers XL 8" - 12" w/ Foot Pump, 2 Support Rollers Power Drive for 258 / 258XL Soil Pipe, 2" - 12" w/ Ram, Pump Electric Cutting HC450 Up to 4-3/4" hole, 1-1/4" - 8" Pipe Fein Pipe/Hacksaw Up to 24" pipe, variable speed c/w Clamp Manual Flange Spreading ST-302 4" ST-303 5" ST /8" Ratchet "Pop-It" 1/16" - 5-1/4" Hydraulic Flange Spreading 1/2 Ton Wedge 3/8" / 3-1/4" Ton Wedge 3/8" / 3-11/16" Ton Flange 2-3/4" - 8-1/2" Opening Aligning 461 Straight 1-1/2" - 8" Ultra Clamp 2" - 6" " - 12" Tipton Line Up Clamp Up to 36" K.C. Ratchet Line Up Clamp Up to 42" "C" Clamp Up to 12" "L" Clamp (Bessey) Up to 24" Grooving 915 Manual, 2" - 12" Steel / 2" - 8" Copper Power, 1-1/4" - 6" Steel Manual / Power, 1-1/4" - 6" Steel Power, 2" - 12" Steel " - 6" Copper Roller Set for " - 24" Steel 386 1, Cut Groove Die Head for 1224, 2-1/2" - 4" Manual Threading 2-S Spiral Reamer, 1/4" - 2" R Die Head 1/8" - 2" (each) R Ratchet R Set 1/2" - 2" c/w Ratchet Oiler Power Threading 700 Power Drive Support Arm Power Drive Threading Package c/w 1 die head Carriage Assembly A Die Head, 1/4" - 2" Threader 2-1/2" - 4" Jobsite Industrial Rental Services 2015 Rental Rates - Page 5 of 11
6 161 Threader 4" - 6" A Universal Drive Shaft Tristand, 1/4" - 6" Threading Machine, 1/4" - 2" c/w 1 die head Threading Machine, 1/4" - 4" c/w 1 die head Die Head 1/4" - 2" for 1224 Machine Nipple Chuck 1/2" - 2" Oiler Pipe Stands / Rollers V Top 2,000 lb. 1/8" - 24" Steel Roller Top 2,000 lb. 1/8" - 24" Pro Roll 2,000 lb. 1/2" - 36" Big V 2,500 lb. 1/2" - 36" Max-Jax 2,500 lb. 4" - 36" Roller Top HD 4,000 lb., 4" - 30" Power Pipe Roller 1,500 lb. 2" - 16", 110V Pipe / Conduit Carts Cricket 1,000 lb. 12" Cap Grasshopper 2,000 lb. 20" Cap Pipe Mac 2,000 lb. Cap Mac Rack 1,000 lb. Non-Lockable Conduit Rack 3,000 lb. 10' / 12', Lockable Farm Wagon 8 Ton Cap Testing 1450 Manual 725 PSI ,000 PSI, Viton Gasket Electric Hydrostatic 1,100-1,500 PSI, 110V Pneumatic Hydrostatic ,000 PSI Test Plug Maintenance Pipe Freezing Bladder CO2, 3/8" - 3" (CO2 not included) Pipe Freezing System 110V, 1/2" - 2" Steel / 1/2" - 2-1/2" CU Pipe Thawer 110V, 1/2" - 1-1/2" Hot Tap 3/4" - 2" NPT Drain Snake Manual, 3/4" - 1-1/2", 25 ft Drain Snake 110V, 3/4" - 2-1/2", 25 ft Sewer Snake 5/8" x 100 ft. 110V, 3" - 6", Pipe Inspection Camera 200' - 3" - 10" w/ LCD screen & USB 512HZ 600 1,800 Pipe Locator Sonde, 512HZ GENERATORS & PUMPS WEEKLY 4 WEEKS Generators Gas 2,500 Watt ,500 Watt Propane 9,000 Watt, Ranger Pumps Transfer 3/4", 110V, Viton /4", 110V, Viton, Explosion Proof Barrel Manual, 22oz / stroke Electric, 110V, 1HP, 32 GPM Submersible 2", 110V, 65 GPM, Max 40' Head Diaphragm 2" Pneumatic, 140 GPM, Nitrile " x 50' Discharge Hose w/ Camlock Pressure Washer 110V, 1,100 PSI Gas, 4,000 PSI WIRE & CABLE HANDLING WEEKLY 4 WEEKS Bending Hydraulic 300-1,000 MCM Cutting Manual 750 MCM CU / 1,000 MCM AL Ratchet 750 MCM CU / 795 MCM AL Hydraulic 1,000 MCM CU / AL Cordless 1,590 MCM CU / AL Cable Stripper Use w/ 300 Power Drive Jobsite Industrial Rental Services 2015 Rental Rates - Page 6 of 11
7 Compression Tools Mechanical MY29 #8AWG MCM CU Hydraulic Y MCM, 12 Ton Y46 1,000 MCM, 15 Ton Die Adapter Y Hydraulic / Dieless #4AWG - 1,000 MCM CU/AL, 12 Ton Cordless #8AWG MCM CU/AL Cordless / Dieless #4AWG - 1,000 MCM CU/AL, 12 Ton Dies #8AWG MCM CU/AL ,000 MCM CU/AL Knockout Sets Mechanical /2" - 2" Ratchet Hydraulic /2" - 2" Straight /2" - 2" 90 Deg /2" - 2" w/ Pump, Ram /2" - 4" w/ Pump, Ram /2" - 2" Stainless w/ Pump, Ram /2" - 4" Stainless Cable Pulling Two Way Radio Hand Held Speaker Mic 5 15 Ultra Cable Feeder x 750 MCM cap Cable Puller G3 2,000lb Super Tugger 6,500 lb Super Tugger 8,000 lb Super Tugger 10,000 lb Floor Mount Bracket UT8 / 6805 Pulling Pkg. 8,000 lb ,035 UT10 Pulling Pkg. 10,000 lb ,236 Reel Jack 2,500 lb. # " ,000 lb. Ratchet " ,000 lb. Ratchet " ,000 lb. Ratchet T Base " Reel Bar 2" solid steel x 7' long Fish / Vac System 690 w/ accessories Fishtape Manual 1/8" Up to 240 ft Pulling Rope Break Strength - 9,000 lb. 1/2" x 300 ft. DB Polyester / w/ Kevlar Eye 1/2" x 600 ft. DB Polyester / w/ Kevlar Eye /2" x 1200 ft. DB Polyester / w/ Kevlar Eye Break Strength - 19,000 lb. 3/4" x 300 ft. DB Polyester / w/ Kevlar Eye 3/4" x 600 ft. DB Polyester / w/ Kevlar Eye /4" x 1200 ft. DB Polyester / w/ Kevlar Eye Break Strength - 34,000 lb. 1" x 300 ft. DB Polyester / w/ Kevlar Eye 1" x 600 ft. DB Polyester / w/ Kevlar Eye 1" x 1200 ft. DB Polyester / w/ Kevlar Eye Wire Grip Kit Clamp w/ Brass clevis, 6,500 lb. cap Rope Swivel c/w connector 7,000 - lb. 10,000 lb ,000 lb Kellems Grip 1/2" - 4" Sheaves Feeding Hook 650-6", 4,000 lb Cap ", 4,000 lb Cap ", 4,000 lb Cap ", 4,000 lb Cap ", Twin Yoke, 4,000 lb Cap , 8,000 lb Cap , 8,000 lb Cap , 8,000 lb Cap Triple 6,500 lb Cap " Radius, 4,000 lb Cap " Radius, 4,000 lb Cap Jobsite Industrial Rental Services 2015 Rental Rates - Page 7 of 11
8 Tray Rollers Sheave " Long Straight 12" - 24" Pilgrim " - 36" Pilgrim Right Angle 90 Deg. Pilgrim R 36 Radius Testing Megohmmeter 250 / 500 / 1,000 V ELECTRIC TOOLS WEEKLY 4 WEEKS Drills 1/2" Hammer /2" Right Angle /4" HD "T" Handle " SDS Plus Rotary Hammer /8" SDS Max Rotary Hammer Diamond Handheld, 1/2" - 4" Cap Core Rig, 1/2" - 14" Cap Core Bit, Up to 14" Magnetic Up to 1-1/8" Broach / Up to 1/2" Chuck Up to 1-3/8" Broach, Low Profile 6-11/16" Up to 2" Broach / 1/2" Chuck Up to 1-1/4" #3 Morse Taper / 3/4" Chuck Drill Press 5/8" Chuck /4" Chuck Breaker 60 lb, 110 V Extension Cord 12/3, 50 ft /3, 100 ft Fans 8" Ventilator, 800 CFM 110V w/ 25' Duct " Ventilator, 3,200 CFM 110V w/ 25' Duct " Box, 5,000 CFM, 110V " Barrel, 5,000 CFM, 110 V " Pedestal, 5,000 CFM 110 V ", 14,000 CFM, 110 V Duct 8" x 25 ft " x 25 ft " x 20 ft Lights Wobblelight 85 Watt Flourescent Watt Metal Halide Cart 1,000 Watt Metal Halide Trouble 50' Explosion Proof, 75 Watt Grinders Die 1/4" Collet Saws Jig " Chop Portaband Reciprocating Fein Pipe/Hacksaw c/w Clamp /4" Worm Drive Circular " Electric Quick Cut Tile & Interlock, 3-3/4" x 24" Bandsaw Floor Model, 7" x 12" " Table " Mitre Impact Wrenches 1/2", 265 ft. lbs /4", 450 ft. lbs ", 740 ft. lbs Jobsite Industrial Rental Services 2015 Rental Rates - Page 8 of 11
9 Miscellaneous Heat Gun 570 / 1,000 deg. F Nibbler 16 GA Shear 18 GA Vacuum Wet / Dry Hepa (Filters extra) Bearing Induction Heater 4-3/8 x 11" OD Max, 110V " x 22" OD Max, 220V Cordless Tools 18 Volt 1/2" Hammer Drill /2" Right Angle Drill /4" Hex Screwgun /2" Dr. Impact /2" Grinder /2" Circular Saw Volt Portaband Saw Volt 1" SDS Plus Rotary Hammer Reciprocating Saw AIR TOOLS WEEKLY 4 WEEKS Compressor Portable, 7.3 CFM, 110V, 20 Gal Diesel, 185 CFM 386 1,128 Hose 3/8 x 50 ft /4" x 50 ft x 50 ft * Chicago, QC, Thor, Dixon, Boss air fittings all available Chipper Pistol Grip.401 Shank lb lb. Rivet Buster Drill Right Angle, 3/8" Chuck Pistol Grip, 1/2" Chuck Die Grinder Right Angle, 1/4" Collet Straight, 1/4" Collet Grinder 7" Impact Wrench, 1/ / / Ratchet 3/8" /2" Nibbler 14 GA Needle Scaler Fein Pipe/Hacksaw Manifold (certified) 15 Gal. 8 port Venturi Air Horn 6" - 8" Water Separator (In-Line) Dryer w/ Precooler 250 CFM Vacuum 55 Gal, 2" Hose, 68 CFM CONFINED SPACE WEEKLY 4 WEEKS Tripod Retrieval System 50 ft ft Retrieval System 50 ft. Davit Arm, Bolt Down Base w/ Winch 600 1, ft. Portable Base w/ Winch 750 2,040 Self Retracting Life Line 8 ft ft ft ft ft ft ft Gas Monitor c/w Bump Test Kit & Calibration Gas Way Mobile Radio Hand Held Speaker Mic 5 15 Fan 8" Ventilator, 800 CFM 110V w/ 25' Duct " Ventilator, 3,200 CFM 110V w/ 25' Duct " Box, 5,000 CFM, 110V " Barrel, 5,000 CFM, 110 V Jobsite Industrial Rental Services 2015 Rental Rates - Page 9 of 11
10 24" Pedestal, 5,000 CFM 110 V ", 14,000 CFM, 110 V Duct 8" x 25 ft " x 25 ft " x 20 ft Negative Air Machine 1,850 CFM, Filters Extra Portable HEPA Room 29" x 55", up to 10'6" 500 1,000 EXPLOSION PROOF / INTRINSICALLY SAFE WEEKLY 4 WEEKS 2 Way Mobile Radio Hand Held Speaker Mic 5 15 Pump Diaphragm Air 2" w/ Ground Transfer, 110V, 1" Fan 16" Ventilator, 2,900 CFM 110V w/ 25' Duct Light Trouble, 110V, 50 ft. cord Vacuum Air, 55 Gal. 2" Hose, 68 CFM Distribution Panel SCAFFOLD & LADDERS WEEKLY 4 WEEKS Scaffold Galvanized Frame 5 ft. x 5 ft. Full ft. x 3 ft. Half High x 5 ft. Narrow x 3 ft. Half High Narrow Brace 5 8 Safety Clip Deck, Aluminum 7 ft. x 19" Guard Rail 5 8 Guard Rail Post 5 8 Caster 8" Swivel Locking 9 16 Screwjack 9 16 Base Plate 5 8 Outrigger Gooser Bar Baker Scaffold Full Section Ladders H.D. Fibreglass Step 4 ft ft ft ft ft ft Fibreglass Platform 4 ft ft ft ft ft Fibreglass Extension 20 ft ft ft ft STORAGE BOXES, CAGES & RACKS WEEKLY 4 WEEKS Job Box w/ Casters Cage Depth x Height x Length 2 ft. x 18" x 3 ft ft. x 2 ft. x 4 ft ft. x 2 ft. x 6 ft Upright Cabinet 2 ft. x 5 ft. X 5 ft Upright Cabinet 2 ft. x 5 ft. X 5 ft. Millwright Portable Field Office Depth x Height x Width 6 ft. x 8 ft. x 8 ft. Lock-up w/ Casters Jobsite Industrial Rental Services 2015 Rental Rates - Page 10 of 11
11 38" x 80" x 49" High Pressure Gas Propane 33 lb. 8 Bottle Propane 33 lb. 12 Bottle Lifting (Certified), 35" x 24" x 40" Pipe Rack 5 ft. Conduit, Open ft. Conduit, Lockable ft. Copper, Lockable Work Table 4 ft. x 4 ft ft. x 8 ft Farm Wagon 8 Ton Cap Saw Horse H.D BOLTING AND FASTENING WEEKLY 4 WEEKS Pry Bar Up To 60" Pipe Wrench Steel / Aluminum Up To 48" Hammer Wrench Up To 5" Hammer Wrench, Non Striking Up to 2-1/2" Nut Splitter Hydraulic 15 Ton, 1/2" - 1-1/2" Hex Ton, 1-1/8" - 2-1/4" Hex Punch Hydraulic 35 Ton 13/16" Dia. 1/2" Thick Sockets Impact, 1/2" - 1-1/2" Dr. Up to 5 Impact Set, 1/2" - 1" Dr. Chrome, 1/4" - 1" Dr. Up To 3" Chrome Set, 1/4" - 1" Dr. Ratchet, Up to 1" Dr. Sledge Hammer Up To 16 lb. Torque Wrenches Calibration Service Provided In-House Manual 200 in./lb. 3/8" Drive ft./lb. 3/8 Drive ft./lb. 1/2 Drive ft./lb. 3/4 Drive ft./lb. 1 Drive Torque Multiplier 4:1 1/2" In, 3/4" Out /4" In, 1" Out Hydraulic 1400 ft./lb. 3/4" Drive 743 1, ft./lb. 1" Drive 796 2,228 11,000 ft./lb. 1-1/2" Drive 1,167 3,183 Burlington 4200 Morris Drive Ph. (905) Toronto 151 Cherry Street Ph. (416) Cambridge 260 Industrial Road Ph. (519) Sudbury 3319 Kingsway Road Ph. (705) Jobsite Industrial Rental Services 2015 Rental Rates - Page 11 of 11
PRODUCT HIRE LIST PRODUCT HIRE LIST HIRE - SALES - REPAIR - TESTING LIFTING EQUIPMENT & ENGINEERING SUPPLIES SPECIALISTS
PRODUCT HIRE LIST PRODUCT HIRE LIST 2014 PRICES ON REQUEST All products also available for purchase LIFTING EQUIPMENT & ENGINEERING SUPPLIES SPECIALISTS HIRE - SALES - REPAIR - TESTING INTRODUCTION THE
FACILITY ACCREDITATION CHECKLIST #001 APPRENTICESHIP. Rating Code: Y = Yes * N = No * R = Required * AUDIT AREA: DATE: / / HAND TOOLS Y N R
FACILITY ACCREDITATION CHECKLIST #001 APPRENTICESHIP Designated Trade: Level 1 2 3 4 Institution: Evaluator(s) / / Rating Code: Y = Yes * N = No * R = Required * * Please use a CHECKMARK under the appropriate
EQUIPMENT LIST. Your. www.1rentaldepot.com Hours Monday Friday 7:00 a.m. 5:00 p.m. Saturday 8:00 a.m. 12:00 noon. Partner in the Planning
www.1rentaldepot.com Hours Monday Friday 7:00 a.m. 5:00 p.m. Saturday 8:00 a.m. 12:00 noon Saint Petersburg 4895 34 th Street North (727) 528-1588 EQUIPMENT LIST Your Partner in the Planning for all Your
2100 AD 015 0009 Mirror Elevator Ball Nut Replacement Procedure
2100 AD 015 0009 Mirror Elevator Ball Nut Replacement Procedure Derek Guenther 1/28/2015 Rev. Purpose The purpose of this document is to describe the procedure necessary to replace one of the ball nuts
Sales Rentals Repairs Buy/Trade 800-800-6011 email: sales@gequip.com
Sales Rentals Repairs Buy/Trade 800-800-6011 email: sales@gequip.com Serving the Nation for over 26 years. Product Categories Air Equipment Compressors Horns & Movers Hydrostatic Pumps Tools & Manifolds
2010 APPLICATION REFERENCE GUIDE
2010 APPLICATION REFERENCE GUIDE INDEX QUALITY POLICY 2 ERGO ASSIST STANDARD 4-13 CUSTOM 14-18 END EFFECTORS 19-24 LIFT ASSIST 25-41 FIXTURED TOOLS 42-53 FIXTURES 54-63 ASSEMBLY TABLES 64-72 CARTS/ DUNNAGE
Number Wheeler P/N Description Set Rex P/N Notes 1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8)
1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8) 4 5 600130 Spring Washer (8mm) 4 6 600344 Roll Pin (M6x30) 4 7 600129 Socket Hd Cap Screw (M8x25) 4 8
WIRE ROPE CUTTERS. Designed for new and unused wire rope. Since 1928
WIRE ROPE CUTTERS Designed for new and unused wire rope Since 1928 IMPACT 101 104 106 108 103 105 107 109 Model 1 (light duty): Model 1 3 /4 capacity 101 Cutter complete 8 lbs. 102 Casting base 4 lbs.
UNIVERSAL 1550 PRE-MIX DISPENSER
MODEL NO. 284974xxx 1 of 8 Control Code A ªIMI Cornelius Co., 1987-95 22 5 6 2 3 7 4 1 26 32 19 28 33 29 27 11 15 18 16 17 14 9 31 30 34 24 20 23 8 10 21 13 FIGURE 1. ASSEMBLY ªIMI Cornelius Co., 1987-95
Number Wheeler P/N Description Set Rex P/N Notes
1 604041 Base 1 4041 2 604042 Base Cover 1 4042 3 608849 Washer (M5) 2 4 600124 Spring Washer (M5) 2 5 600329 Rd Hd Machine Screw (M5x8) 2 6 604047 Strainer 1 4047 7 600204 Rd Hd Machine Screw (M6x10)
Pipe Cutting and Beveling Clamshells
Pipe Cutting and Beveling Clamshells Who We Are One Company, Total Support, Complete Solutions For more than a century, Hydratight has provided world-class bolted joint solutions and continues to set international
GEET Fuel Processor Plans
GEET Fuel Processor Plans This is a greatly simplified Proof of Concept version of the GEET Fuel Processor that just about anyone can build from parts from a local Hardware store in a weekend for very
18. CARGO TROLLEYS, LIFTING TABLES, HYDRAULIC TABLE TRUCKS, HAND TROLLEYS
18. CARGO TROLLEYS, LIFTING TABLES, HYDRAULIC TABLE TRUCKS, HAND TROLLEYS CARGO TROLLEYS LIFTING TABLES HYDRAULIC TABLE TRUCKS HAND TROLLEYS 18 CARGO TROLLEYS CARGO TROLLEYS 1500 KG groove in the centre
HYDROSTATIC TEST PUMPS
HYDROSTATIC TEST PUMPS MANUAL HYDROSTATIC TEST PUMPS Ideal for testing residential water lines. Also for pressure testing small pressure tanks, sprinkler, boiler and solar systems. Lightweight and easy
Job-Site Tooling and Equipment for the Construction Industry. Rentals Sales Service & Repairs
Job-Site Tooling and Equipment for the Construction Industry Rentals Sales Service & Repairs Sales Servicing the construction industry since 1973 with dependable products and service. Offering both rentals
PaLLe t trucks Lifting carts t r g in t if L 2435 6815 6836 6856 6842
l i f t i n g c a r t s Lifting carts The prograe for lifting, transporting and storage From the classical forklift trolley to the machine lifter, from furniture dollies to a chassis with 24 tons load
Power Cube Open Source Ecology Page 1. Power Cube. Version 4
Power Cube Open Source Ecology Page 1 Power Cube Version 4 Power Cube Open Source Ecology Page 2 Contents Table of Contents Power Cube... 1 Contents...2 Introduction... 3 Bill Of Materials...4 Discrete
MGB Chrome Bumper Conversion
MGB Chrome Bumper Conversion Installation Instructions For 1974 1/2-1980 MGB This kit requires cutting, welding, and painting. Professional installation recommended. Note: Every MGB body is slightly different
I BEAM TRACK INSTALLATION
PDQ 0/700 FESTOON SYSTEM INSTALLATION AND MAINTENANCE INSTRUCTIONS INTRODUCTION The PDQ Festoon System was designed to run on one of three sizes of I-beams: S x., S8 x 8. and S x.. System trolleys must
Number Wheeler P/N Description Set Rex P/N Notes
1 607051 Base 1 A050 2 607052 Motor Cover 1 A052 3 600778 Socket Hd Cap Screw (M8x60) 2 4 607053 Scrap Receiver 1 A053 5 607054 Tank Upper Cover 1 A054 6 607055 Oil Pot 1 A055 7 607056 Strainer 1 A056
POWERS Controls No. 4 Pneumatic Damper Actuator
POWERS Controls No. 4 Pneumatic Damper Actuator Technical Instructions Document No. 155-032P25 AP 331-2 Actuator Assembly 331-2929 Typical Actuator Assembly 331-2904 Typical Actuator Assembly 331-3000
Mission. Directors: L to R standing Greig Laughlin, Anthony Buxo, Mark Laughlin, Andre John,
Corporate Profile Laughlin & de Gannes (LDG) was established in 1949 as a supplier of automotive products, to service the needs of the motoring public. Over the past 54 years, the Company has diversified
Owner s Manual Gantry Cranes
Owner s Manual Gantry Cranes Fixed Height Gantry Crane MODEL NUMBER: SERIAL NUMBER: CAPACITY IN TONS: Telescoping Gantry Crane Bushman AvonTec 262-790-4200, 800338-7810, Fax 262-790-4200 www.bushmanavontec.com
INSTALLATION INSTRUCTIONS. 6108 Air Spring Kit 2011+ Ford F250 Single Wheel 4WD 2011+ Ford F350 Dually 4WD (2011 F350 Single Wheel 4WD use p/n 6113)
INSTALLATION INSTRUCTIONS 6108 Air Spring Kit 2011+ Ford F250 Single Wheel 4WD 2011+ Ford F350 Dually 4WD (2011 F350 Single Wheel 4WD use p/n 6113) Thank you for purchasing a quality Hellwig Product. PLEASE
Vision Engravers and Routers PRE-Installation Guide. 2015 Vision Engraving & Routing Systems
Vision Engravers and Routers PRE-Installation Guide Revised: 8/19/2015 Vision Engravers and Routers PRE-Installation Guide All rights reserved. No parts of this work may be reproduced in any form or by
EVALUAT ING ACADEMIC READINESS FOR APPRENTICESHIP TRAINING Revised for ACCESS TO APPRENTICESHIP
EVALUAT ING ACADEMIC READINESS FOR APPRENTICESHIP TRAINING for ACCESS TO APPRENTICESHIP SCIENCE SKILLS SIMPLE MACHINES & MECHANICAL ADVANTAGE AN ACADEMIC SKILLS MANUAL for The Construction Trades: Mechanical
BUILT-IN DISHWASHER INSTALLATION INSTRUCTIONS
BUILT-IN DISHWASHER INSTALLATION INSTRUCTIONS PLEASE READ COMPLETE INSTRUCTIONS BEFORE YOU BEGIN LEAVE INSTALLATION INSTRUCTIONS AND USER'S GUIDE WITH OWNER ALL ELECTRIC WIRING AND PLUMBING MUST BE DONE
STEADYfast Stabilizer Installation Notes Fifth Wheel and Travel Trailers 11/23/13
STEADYfast Stabilizer Installation Notes Fifth Wheel and Travel Trailers 11/23/13 (See Supplemental Instructions for trailers with heavy duty round footplates and/or Power Leveling Systems) PHONE SUPPORT
THE PIPE FABRICATORS SOURCE BOOK
THE PIPE FABRICATORS SOURCE BOOK TM Pipe Jacks & Stands Pipe Beveling & Cutting Machines Pipe Clamps, Alignment & Fit-up Pipe Purging, Stoppers & Plugs Pipe Rigging, Moving & Storage 713.747.8502 bbpipetools.com
Front axle components, overview
just a test. Front axle components, overview 40-1 General Information Load bearing components and parts of the suspension must not be welded or straightened. Vehicles without drive axle must not be moved,
7.1. Part Lists. Hardware Insertion Machine. Instructions. Instructions
Instructions Instructions The Parts in this section of the manual are listed by Item Number, Part Number, Description and Quantity. The Item Numbers are in a circle with an arrow pointing to the specific
INSTALLATION AND OPERATING INSTRUCTIONS For Model GL1 Gate Locks
Securitron Magnalock Corp. www.securitron.com ASSA ABLOY, the global leader Tel 800.624.5625 techsupport@securitron.com in door opening solutions INSTALLATION AND OPERATING INSTRUCTIONS For Model GL1 Gate
16 April 2012 1032011-F 1994-2002 Dodge Adjustable Track bar with Relocation Bracket 1
16 April 2012 1032011-F 1994-2002 Dodge Adjustable Track bar with Relocation Bracket 1 BD Adjustable Track Bar w/bracket Dodge 2500-3500 4WD Models 1994-2002 Dodge 1500 4WD Model 1994-2001 P/N# 1032011-F
Product catalogue, pipe and sewer cleaning systems
Product catalogue, pipe and sewer cleaning systems Nozzles Rotorjet trolley Hose reels Cleaning devices www.hammelmann.com Contents (Navigation via Bookmarks) Rotorjet trolley Rotary joints, spray pipes
INSTRUCTIONS THOROUGHLY BEFORE BEGINNING***************
Bill of Materials: RAC0012 Green Wing Aerodynamic Skirt Kit Item Part Number Description Quantity 1 RMC0218 Gen 2 Trailer Skirt Roadside 1 2 RMC0219 Gen 2 Trailer Skirt Curbside 1 3 RMC0041 Trailer Skirt
2 BOXES OF HEAVY DUTY MACHINE LIFTING BRACKETS
272 12 RUBBERMAID 4-WHEEL CARTS 40 x 16 x 32 AND 40 x 25 x 32 271 12 RUBBERMAID 4-WHEEL CARTS 40 x 25 x 32 416 11 ASSORTED SHOP CARTS 418 118 x 50 WIDE 10 TON TRANSFER CART, WITH PNEUMATIC CONTROLS 37
Midwest Industrial Tanks
FOR AGRICULTURE AND INDUSTRY Midwest Industrial Tanks Fuel & Oil Storage Solutions Midwest Industrial Tanks Is Your Source For All Of Your Fuel Storage And Fuel Transportation Needs. Our Satisfied Customers
IF YOU NEED A POLE BARN OR DIY KIT CALL NOW AND LETS MAKE A DEAL
IF YOU NEED A POLE BARN OR DIY KIT CALL NOW AND LETS MAKE A DEAL Check out our Affordable Selection of DIY Pole Barn kit sizes and prices below. We offer a complete DIY pole barn kit plus independent experienced
INSTALL INSTRUCTIONS KK-C-HVAC-1 HVAC UNIT 2003-2014 CHEVROLET/GMC VANS FOR
INSTALL INSTRUCTIONS KK-C-HVAC-1 HVAC UNIT 2003-2014 CHEVROLET/GMC VANS FOR (For NEW 2007 ALL WHITE KWIK-KITS ONLY) Warning do not attempt to install A/C units unless you are experienced with servicing
18. SKATES, PLATFORM HAND TRUCKS, LIFTING TABLES AND HAND TROLLEYS
18. SKATES, PLATFORM HAND TRUCKS, LIFTING TABLES AND HAND TROLLEYS SKATES LIFTING TABLES HAND TROLLEYS PLATFORM HAND TRUCKS SKATES SKATE 1500KG for moving machines and equipment duration oiled metal wheels
ELLIOTT COLLET STYLE Baffle Expander With Hydraulic Power Supply
TM-37 07-29-04 Elliott offers a complete line of precision tube tools, including: tube expanders Boiler Expanders Heat Exchanger Expanders Condenser Expanders Refinery Expanders tube rolling motors & torque
Section M POWER LIFTS
Section M POWER LIFTS December 2009 1M Index 1. 53-520244-000 Poly V Idler Assembly 2. 53-520205-000 N.A. Mounting Bracket 3. 53-520212-000 Cable Assembly 4. 53-600149-000 Wire Harness Assembly 5. 53-860322-010
413 NOVA SYSTEM PAN AMERICAN TOOL CORPORATION 5990 NW 33309-2208 PHONE (954)735-8665 TOLL FREE 1-800-423-2764 FAX
413 NOVA SYSTEM 5990 NW 31st Avenue Ft. Lauderdale, Florida 33309-2208 PHONE (954)735-8665 TOLL FREE 1-800-423-2764 FAX (954)735-8668 2013 Pan American Tool Corporation 2013 TERMS AND CONDITIONS TERMS:
Product Catalogue (updated Feb. 2010)
Product Catalogue (updated Feb. 2010) 315 BROCK RD GREENSVILLE ON L9H 5H7 PHONE: 905-628-0766 FAX: 905-628-8277 www.efcomltd.com info@efcomltd.com 1 Table of Contents Tool Boxes... 3 Cylinder Enclosures
New Employee / Applicant - Information Pack (Includes: Driver Back round Release Form, Skills & Tools Assessment
New Employee / Applicant - Information Pack (Includes: Driver Back round Release Form, Skills & Tools Assessment Included are the following: Personal information form Driver Back round Check Authorization
C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S
C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S January 2009 Issue 6 Valu Guide Brackets The Ultimate in Adjustability and Cost Savings Valu Guide brackets are part of a family
2011-14 F250 6 RADIUS ARM KIT
92154000 Thank you for choosing Rough Country for your suspension needs. 2011-14 F250 6 RADIUS ARM KIT Rough Country recommends a certified technician installs this system. In addition to these instructions,
XL PREMIUM OIL COOLER KIT
-J05 REV. 0-0-0 XL PREMIUM OIL COOLER KIT GENERAL Kit Number 0008 Models For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English
Aviva Insurance Limited
One Park Place, Hatch Street, Dublin 2 Registration number: 9002 is accredited by the Irish National Board (INAB) to undertake inspection as detailed in the Schedule bearing the above registration number,
Heavy Duty Equipment Mechanic (Class Code 3743) Task List. Inspection and Diagnosis
Heavy Duty Equipment Mechanic (Class Code 3743) Task List Inspection and Diagnosis In order to verify complaints and determine malfunctions a Heavy Duty Mechanic: 1. Reads operators written trouble reports,
Machine Moving. By Norm Berls
Machine Moving By Norm Berls Machine Moving Sources Metalworking: Sink or Swim by Tom Lipton Google Images Vendor Web Pages YouTube Own experiences Formerly professional riggers and movers moved most heavy
HAND PALLET TRUCK Lift-Rite
HAND PALLET TRUCK Lift-Rite Before you Order: To ensure that you get the correct parts, be certain whether your L-50 pallet truck is a standard model or one of the loweredheight models (MINI or CHEP).
Lathe Milling Attachment
Lathe Milling Attachment By L C. MASON BY CLEVERLY stacking cold-rolled flat stock together, T-slots and slide for this lathe milling attachment are made without costly machinery. In fact, only two tools,
Manual piston sampler...m 11
SAMPLING Manual piston sampler...m 11 Screw sampler...prec 22...PREC 100 Slide sampler...pr 55 Rotative screw sampler...prv Piston sampler...p 11 Sampler on belt conveyor...pba Rotating cup sampler...pgr
Audio Visual Equipment Projector Screen 50"x50" Projector, Lcd 2700 Lumens. Automotive Items Socket Set, 3/4" Automotive Tow Dolly, 2
COMPLETE OUTDOOR EQUIPMENT Rental Item List Air Tools and Equipment Air Compressor, Ac1-8gr Gas Air Compressor, Mi - T - M 115 V Air Compressor, A C 1-5 E, 4.1cfm Air Compressor, cfm tow behind Air Hose
INVESTMENT RECOVERY SERVICES
INVESTMENT RECOVERY SERVICES Late Model Roll Form Facility Mar 22, 2016 10am CST 3570 Shelby Rd Denton Texas 76207 United States Lot Description 1 TOOL BOX W/ TOOLS 2 MINI BAUTE MAGNETIC DRILL MDL: RB32
Wallace Tri-Adjustable Gantries Round Tube Assembly Instructions
Wallace Tri-Adjustable Gantries Round Tube Assembly Instructions For any additional information, Please call -800-55-LIFT. Before You Begin S. Read and understand instructions before using this gantry..
Oceanscience Cable Chimp II Cableway ROV System User Guide and Warranty
Oceanscience Cable Chimp II Cableway ROV System User Guide and Warranty Page 1 Table of Contents Introduction Page 3 Overview Page 3 Setup and Operation Page 5 Remote Control Page 6 Power Management Page
ANNEX 4 - IG Rate Comparison TECHNICAL COMPARISON OF CONTRACT TERMS T&T BISSO
ANNEX 4 - IG Rate Comparison TECHNICAL COMPARISON OF CONTRACT TERMS - Version 7 June 2010 (1) Category 1 - vessel adrift TOWHIRE SCOPIC rates with 20% uplift, out-of-pocket expenses at cost plus 15% (2)
Spare Parts Program. Parts, Consumables & Accessories. 800.837.9711 superproductsllc.com
Spare Parts Program Parts, Consumables & Accessories TABLE OF CONTENTS Program Introduction 3 Body 4 5 Boom 5 6 Hydraulic 6 Lights & Accessories 7 Tubes, Nozzles & Hose Fittings 8 11 Vacuum 11 Water 12
1/29/2008 DR50. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 45
DR50 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 45 CYLINDER & CYLINDER HEAD Part UPC Number Description Baja Description 1 DR50-001 842645074424 CYLINDER 1 1 2 DR50-002 842645074431
CABLE PULLING. Contents. www.greenlee.com
www.greenlee.com CABLE PULLING FROM SIMPLE, STRAIGHT SHOTS TO PULLS WITH MULTIPLE BENDS AND OFFSETS, GREENLEE CABLE PULLING EQUIPMENT SAVES TIME, INCREASES YOUR EFFICIENCY AND SAFELY PULLS CABLE WHERE
ALTRA 400 Operator Manual. Planographs and Wiring Diagrams
Planographs and Wiring Diagrams 16 Altra 400 Final Assembly All Altras w/head # Part # Description Specific Use (if any) 1 60323A Tank Assy, Altra 400 115 Volt model 60358A Tank Assy, Altra 400 SP 230
Slide the new steering column shaft through the steering column from the driver compartment.
Slide the new steering column shaft through the steering column from the driver compartment. Push the column shaft through the steering column until the machined end is out past the column lower bushing.
1.1 DIMENSIONS AND WEIGHT PAG. 2 1.2 LOAD CENTRE FOR LIFTING PAG. 2 1.3 STORAGE CONDITIONS PAG. 2
TRANSPORT AND INSTALLATION. DIMENSIONS AND WEIGHT PAG.. LOAD CENTRE FOR LIFTING PAG..3 STORAGE CONDITIONS PAG. STARTING. INSTALLATION PAG.. SPACE REQUIREMENTS PAG. 3.3 ELECTRIC CONNECTION PAG. 3 3 DESCRIPTION
PUMP JACK SYSTEM AND ACCESSORIES
Pump Jack Model # 2200 A low cost, easy to operate, safe, portable scaffolding built of rugged steel. It's perfect for shingling, siding, sheathing, insulating, painting, building, roofing, home repair
QUALITY ENGINEERING & SERVICES W.L.L (A DIVISION OF QUALITY GROUP OF COMPANIES) ISO 9001 : 2008 CERTIFIED COMPANY COMPANY PROFILE
QUALITY ENGINEERING & SERVICES W.L.L (A DIVISION OF QUALITY GROUP OF COMPANIES) ISO 9001 : 2008 CERTIFIED COMPANY COMPANY PROFILE FABRICATION, MACHINING, METAL CASTING, LOAD TESTING, SAND BLASTING & PAINTING,
Topics of the Presentation
Drill Rig Safety Topics of the Presentation Personnel safety and monitoring PPE Health (Drugs and Alcohol) Drill Rig operation Safe set up procedures Safe operation of machine Safety related accidents
Chief S21M PARTS MANUAL. 2005 Chief Automotive Technologies
Chief SM 00 Chief Automotive Technologies Chief s Limited One-Year Warranty & Liability CHIEF'S LIMITED ONE-YEAR WARRANTY & LIABILITY Chief Automotive Technologies, Inc. warrants for one year from date
TABLE OF CONTENTS DT7K INSTRUCTION MANUAL TABLE OF CONTENTS 1-19-00E DT7K
TABLE OF CONTENTS DT7K INSTRUCTION MANUAL SECTION 100 DESCRIPTION & SPECIFICATIONS 17459 INSTALLATION DIMENSIONS - DT7K 17384 MOUNTING HOLE TEMPLATE S14930 INSTALLATION DRAWING - 14930 MOUNTING PEDESTAL
Range Road RR Series Semi-Automatic Firewood Processor. Crated Unit Assembly Manual
Range Road RR Series Semi-Automatic Firewood Processor Crated Unit Assembly Manual 1 1) Undo 8-18mm x 19mm Nuts and bolts, 2 on each leg of top frame 2) Lift top of Metal crate off and move out of work
2
10 MECHANICAL DRIVE SWING AWAY AUGER PARTS LIST SERIAL NOS. 70000-74773 1 2 # PART # DESCRIPTION 1 B198362 Boot Access Cover 2 B030500 Side Wind Jack 3 B003049 PTO Shaft - Constant Velocity 4 B027504 Boot
K&T Saw Shop 606-678-9623 or 606-561-4983
12-600072F PRO MAC 850 SUPER CHAIN SAW 05/92 to Current IPL 215710-R1 Page 1 of 16 Accessories www.ktoutdoor.com 12-600072F PRO MAC 850 SUPER CHAIN SAW 05/92 to Current IPL 215710-R1 Page 2 of 16 Accessories
INSTALLATION INSTRUCTIONS. 6111 Air Spring Kit 2011+ Ford F250/F-350 Single Wheel 2WD 2011+ Ford F350 Dually 2WD IMPORTANT NOTES
INSTALLATION INSTRUCTIONS 6111 Air Spring Kit 2011+ Ford F250/F-350 Single Wheel 2WD 2011+ Ford F350 Dually 2WD Thank you for purchasing a quality Hellwig Product. PLEASE READ THIS INSTRUCTION SHEET COMPLETELY
UFO 1 FOLDER INDEX A2 FOLDING MACHINE TYPE 10060 LIST NO DESCRIPTION PAGE 10101M Main Assembly - Mechanical 2 10201M Main Roller Assembly 4 16101M Upper & Lower Perforator Shaft Assembly 6 12701M Primary
Mueller B-101 and A-3 Drilling and Tapping Machines
TM TM Mueller and Drilling and Tapping Machines A guide to selecting Mueller Equipment Mueller TM TM and Drilling and Tapping Machines When it comes to line stopping and drilling and tapping technology
Parts. Ultra 395/495/595t Ultra Max II 490/495/595t 309675V 120 VAC. 3300 psi (228 bar, 22.8 MPa) Maximum Working Pressure.
Parts Ultra 395/495/595t Ultra Max II 490/495/595t 309675V EN 3300 psi (228 bar, 22.8 MPa) Maximum Working Pressure 0 VAC Type Stand Series Lo-boy Series Hi-boy Series Ultra 395t 2339 B 233961 B 233962
AESCO/MADSEN. Self-Erect Silos by AESCO/MADSEN
AESCO/MADSEN Self-Erect Silos by AESCO/MADSEN AESCO/MADSEN manufactures two self-erecting silos called the WM-Series. The WM-50 has a 50-ton silo and the WM-80 has an 80-ton. The WM Series comes complete
How To Launch A Rocket From A Formica
Building the Basic Bottle Rocket Launch Pad Materials: -Formica double-sink countertop cutout. This can be easily and cheaply obtained from a local company that manufactures and/or installs countertops.
REMOVAL AND INSTALLATION
303-01C-1 REMOVAL AND INSTALLATION Engine Body On Special Tool(s) Adapter For 303-D043 303-D043-02 or equivalent Special Tool(s) 303-01C-1 Turbocharger Lifting Bracket 303-1266 Wrench, Fan Clutch Nut 303-214
Installation Manual. Solar Pool Heating System. Read the complete manual before beginning the installation
Solar Pool Heating System Installation Manual Read the complete manual before beginning the installation 1. Sizing the System Visit www.techno-solis.com to size the system using the sizing calculator.
ENGLISH FORK GUIDE 2013
FORK GUIDE 2013 ENGLISH 1 With a brand which is synonymous with specialists in forest products handling attachments, BOLZONI AURAMO offers its expertise and market leading attachments for all requirements,
K&T Saw Shop 606-678-9623 or 606-561-4983
11-600072-02 PROMAC 800 CHAIN SAW 08/80 to 05/85 IPL 215724-01 Page 1 of 20 Accessories & Tools www.ktoutdoor.com 11-600072-02 PROMAC 800 CHAIN SAW 08/80 to 05/85 IPL 215724-01 Page 2 of 20 Accessories
AUTOMOTIVE SERVICE TECHNOLOGY BASIC TOOL LIST
AUTOMOTIVE SERVICE TECHNOLOGY BASIC TOOL LIST All automotive students are required to provide their own hand tool set. The following list of tools will serve as a guide for Automotive Service Technology
CABLE SUPPORT SYSTEMS
CABLE SUPPORT SYSTEMS eaturing the CADDY CAT HP J-Hook System Why CADDY CAT HP? Why Choose CADDY CAT HP over tray? ast and Easy to Install Much faster installation compared to conventional cable or ladder
MODEL 2400 RAISED BED PLASTIC MULCH LAYER OPERATING MANUAL
MODEL 2400 RAISED BED PLASTIC MULCH LAYER OPERATING MANUAL Rain-Flo Irrigation 929 Reading Road East Earl, Pa 17519 PH: 717-445-3000 Table Of Contents Bed Height...............................7 Cover Disk...............................9
APE Pile Driving Course: Understanding Pile Driving Leads
APE Pile Driving Course: Understanding Pile Driving Leads Pile Driving Leads Box lead dimensions Box lead swinging Box lead clip on type Box lead, fixed, extended Box lead, semi-fixed travel Flying hammer
Split-type Air-Conditioner INSTALLATION MANUAL CONTENTS FOR INSTALLER MXZ-3A30NA MXZ-4A36NA ATTENTION. English. Français. Español
Split-type Air-Conditioner MXZ-3A30NA MXZ-4A36NA INSTALLATION MANUAL Refer to the installation manual of each indoor unit for indoor unit installation. English Français Español ATTENTION This manual mentions
Architectural Specifications* MODEL HDE
MODEL HDE 200 Fairview Road, Unit #2, Barrie, Ontario L4N 8Z8 Tel: 866-792-9968 or 705-792-9968 Fax: 705-735-9564 www.tnrdoors.com email: info@tnrdoors.com TNR Model HDE Tech Specs September 4, 2012 Page
DR90. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS AND PRICES ARE SUBJECT TO CHANGE 1 of 51
DR90 Toll Free: 888-863-2252 PART NUMBERS AND PRICES ARE SUBJECT TO CHANGE 1 of 51 CYLINDER & CYLINDER HEAD 1 DR90-001 842645048166 CYLINDER 1 1 2 DR90-002 842645048173 GASKET, CYLINDER 1 1 3 DR90-003
DUMP TARP KITS MANUAL TARP KITS ELECTRIC TARP SYSTEMS MECHANICAL CRANK ARM TARP SYSTEMS
ELECTRIC TARP & MANUAL SYSTEMS DUMP TARP KITS MECHANICAL CRANK ARM TARP SYSTEMS MANUAL TARP KITS ELECTRIC TARP SYSTEMS MECHANICAL CRANK ARM TARP SYSTEMS MANUAL TARP KITS TRAILER TARP KITS PARTS & ACCESSORIES
Drive shaft, servicing
Volkswagen Passat B6 - Drive shaft, servicing Стр. 1 из 41 40-7 Drive shaft, servicing Drive shafts, overview I - Assembly overview: Drive axle with CV joint VL100 40-7, Drive axle with CV joint VL100,
INSTRUCTIONS: LocknCharge Laptop Carts
INSTRUCTIONS: LocknCharge Laptop Carts www.lockncharge.com Extra Tools required: Hammer, Philips head screwdriver, medium adjustable spanner. (Allen key supplied) (Panel colours for illustration purposes
PVM Piston Pumps Service Manual
PVM Piston Pumps Service Manual PVM018/020 PVM045/050 PVM057/063 PVM074/081 PVM098/106 PVM131/141 Table of Contents Service Parts Pump Description... 3 Basic pump Pump Operation Controls Types Part Identification...
Product catalogue, tank cleaning systems
Product catalogue, tank cleaning systems Aquamat Tank cleaning units Aquarex Tank cleaning systems www.hammelmann.com Contents (Navigation via Bookmarks) Tank cleaning units L XL XXL High pressure lance
Work Smart - Not Hard with a Blue Giant Lift Table
Lift Tables Hydraulic Lift Tables Eliminate the need to bend, twist and pick up heavy loads manually. Let BLUE GIANT Lift Tables increase productivity and decrease costly injuries caused by overexertion
all VAC LIFT ALL-VAC-LIFT Phone + 1.832.615.9110 4621 Redstart Street www.vac-lift.com Fax + 1.832.201.9101
ergonomic FORKLIFT vacuum ATTACHMENTs FOR ALL MATERIALS HANDLING FOR LIFTING METAL, WOOD, PLASTIC, STONE, CONCRETE, PAPER, AND MORE In Warehousing, Order Picking, Palletizing, Loading, Conveying, Production.
Fisher 1061 Pneumatic Piston Rotary Actuator with Style F & G Mounting Adaptations
Instruction Manual 1061 F & G Actuator Fisher 1061 Pneumatic Piston Rotary Actuator with Style F & G Mounting Adaptations Contents Introduction... 1 Scope of Manual... 1 Description... 2 Specifications...
Important: Please read these instructions carefully and completely before starting the installation. TITAN Fuel Tanks
TITAN pt. no.: 03 0000 0120 Important: Please read these instructions carefully and completely before starting the installation. TITAN Fuel Tanks INSTALLATION INSTRUCTIONS G e n e r a t i o n V Extended
OVERALL CONVEYOR WIDTH STEEL ALUMINUM MODEL # PER FT. 10 FT. 5 FT. PER FT. 10 FT. 5 FT. PER FT. 10 FT. 5 FT. PER FT. 10 FT. 5 FT.
Pick Smarter. Pick Better. Pick UNEX. Skatewheel (SW) Skatewheel Gravity Conveyor is ideally suited to convey lightweight packages and where operations require portable or temporary conveyor lines such