PRODUCT HIRE LIST PRODUCT HIRE LIST HIRE - SALES - REPAIR - TESTING LIFTING EQUIPMENT & ENGINEERING SUPPLIES SPECIALISTS
|
|
- Gloria Pearson
- 8 years ago
- Views:
Transcription
1 PRODUCT HIRE LIST PRODUCT HIRE LIST 2014 PRICES ON REQUEST All products also available for purchase LIFTING EQUIPMENT & ENGINEERING SUPPLIES SPECIALISTS HIRE - SALES - REPAIR - TESTING
2 INTRODUCTION THE FOLLOWING PAGES LIST OUR CURRENT HIRE FLEET BUT THE LIST IS NOT EXHAUSTIVE; IF YOU NEED TO HIRE OR PURCHASE ANY ITEMS PLEASE CONTACT US AND WE WILL BE PLEASED TO SOURCE IT FOR YOU. WE ALSO STOCK A WIDE RANGE OF PRODUCTS AND EQUIPMENT INCLUDING POWER TOOLS, HAND TOOLS, PPE, CONSUMABLES AND ASSOCIATED EQUIPMENT. ADDITIONAL SERVICES Inspection, Maintenance and Repair Services Lifting equipment including hydraulic and pneumatic Power tools (electric/ pneumatic/hydraulic) Vehicle tail lifts Vehicle mounted cranes Vehicle mounted cherry pickers Thorough examinations as per LOLER and PUWER Relevant Inspection Reports and Test Certificates issued Minor On-site repairs undertaken Testing Services On site load testing Workshop load testing 100t tensile 200t compression Portable Appliance Testing Hand Arm Vibration Testing Relevant Inspection Reports and Test Certificates issued Calibration Services Hydraulic Pressure Gauges Torque Wrenches Load Cells Load Links Lifting Tackle We also stock a wide range of slings, shackles and other lifting tackle
3 LIFTING EQUIPMENT Chainblocks Climawinch 0.5T-10ft Fall 1.2T-20ft Fall 1T-10ft / 15ft Fall 1T-20ft Fall 1T-30ft Fall 1T-40ft Fall 1T-50ft Fall 1.5T-10ft Fall 1.5T-20ft Fall 2T-10ft Fall 2T-20ft Fall 2T-30ft Fall 2T-40ft Fall 3T-10ft Fall 3T-20ft Fall 3T-30ft Fall 5T-10ft Fall 5T-20ft Fall 10T-10ft Fall 0.75 Ton Climawinch 15k 3 Ton Climawinch 30k Tirfor 0.75 Ton Tirfor 3.2 Ton Hydraulic Tirfor 3 Ton Tirfor Lever Hoists 0.75 Ton Pullift 3 Ton Pullift 1.5 Ton Pullift 6 Ton Pullift Air Operated Hoists Floor Cranes 1 Ton-40ft-60ft 3 Ton-60ft 1 Ton-25m 6 Ton-30ft 2 Ton-45ft 3 Ton-20m 1 Ton Air Bags 2 Ton-30m Filter + Lubricator Air Bag Foot Pump
4 LIFTING EQUIPMENT Clamps / Trolleys Pullers Camlok Clamp Beam Clamp 1 Ton to 10 Ton U20B U27 c/w Ram U60 c/w Ram Pallet Truck Beam Trolley 0.5 Ton to 10 Ton Skates Compression Load Cells c/w Readout & Calibration 3 Ton Phaff Skates Nylon 15/20 Ton Skates 6 Ton Phaff Skates Nylon 40 Ton Skates 10 Ton 25 Ton 15 Ton 100 Ton Safety Harness Load Link c/w Remote & Shackles Safety Harness Inertia Reel c/w Lanyard 5 Ton 5 Ton wireless 10 Ton 12.5 Ton wireless 20 Ton
5 HYDRAULIC JACKS RAMS & PUMPS Tangye Jacks Accessories 5 Ton Hydraclaw 6.5 Ton Hydramite 15 Ton Ton Ton Ton Ton Ton Ton Ton Ton Ton Enerpac Jack 50 Ton Ton Ton Hydrawedge Hydraulic Flange Spreader Cable Drum Jack (Pair) Small Flange Spreader Claws for Tangye Jacks Screwed Ram for 1250 Jack Screwed Ram for 660 Jack Wedgie Hydrapak Test Pumps (LP 750 PSI - 10,000 PSI) 1,600 psi 2,500 psi 4,500 psi 6,500 psi 10,000 psi Consort Bucket Pump 4 Pressure Gauge 6ft Hydraulic Hose 10ft Hydraulic Hose 12ft Hydraulic Hose 15ft Hydraulic Hose 20ft Hydraulic Hose 30ft Hydraulic Hose 2 Way Manifold c/w Shut Off Valve 3 Way Manifold c/w Shut Off Valve 4 Way Manifold c/w Shut Off Valve Test Rig Shut Off Valve
6 HYDRAULIC JACKS RAMS & PUMPS Hydraulic Rams 5 Ton to 200 Ton Various closed heights and strokes available Pull Rams CD Ton 125mm stroke CD Ton 125mm stroke Pumps Hydraulic pumps to operate rams, both single and double acting. OTC Hydraulic Nut Splitters HNS 175-7/8 1 ½ HNS 225-7/8 2 ¼ Hydraulic Pipe Bender Hydraulic Pipe Bending Equipment ½ -2 Air Hydro Test Pumps Various pressures available 3 Attachment Hollow Rams 60 Ton DA Hollow 100 Ton DA Hollow 10 Ton Hollow Ram 20 Ton Hollow Ram 30 Ton Hollow Ram 50 Ton Hollow Ram 60 Ton Hollow Ram
7 AIR TOOLS Impact Wrenches Drills 1 ½ sq dr ¾ sq dr 1 sq dr ¾ sq dr Angle 1 sq dr Angle ½ sq dr Impact Sockets ½, ¾, 1, 1½ sq dr All metric and Imperial sizes available ¼ Capacity No 3 Morse Taper 3/8 Capacity No 3 Morse Taper Corner ½ Capacity No 4 Morse Taper ½ Corner No 4 Morse Taper Corner No 2 Morse Taper No 5 Morse Taper No 2 Morse Taper Corner Air Tools Impact Accessories Long Series Angle Grinder Cengar Saw ¾ - ½ Reducer 6 Extension 6mm Collet Grinder (Straight or Angle) Recipricating Saws for pipe cutting (Fein) ¾ F to 1 M Adaptor 9 Extension 1 F to ¾ M Reducer 12 Extension 1 F to 1 ½ M Adaptor 1 ½ Universal Joint 1 ½ F to 1 M Reducer Rubber Air Hose 60ft 1 sq dr Universal Joint Rubber Air Hose 100ft ¾ sq dr Universal Joint Alternative lengths available CP9 Hammer Drill Chipping Hammers Needle Guns Flogging Spanners 4 Air Grinder 7 Air Grinder 9 Air Grinder All sizes available in Imperial & Metric
8 ELECTRIC TOOLS - 110V OR 240V ON REQUEST Impact Wrenches / Drills ½ dr Electric Impact Wrench Rotabroach ¾ dr Electric Impact Wrench Mini Bore/Panther ½ 110V Drill RD181 Rotabroach Rotary Hammer Drill Electric Needle Gun Magnetic Drill Stand Grinders & Accessories 4 ½ Grinder 6 Grinder Pencil Grinder 4 Grinder 7 Straight Grinder Transformers 5 Grinder 9 Straight Grinder Ext Leads
9 MISCELLANEOUS REMS Equipment REMS Tiger Saw Electric REMS Tiger Saw Air Amigo 2 Box Set ½ to 2 NPT/BSP REMS Cat Electric Hydraulic Torque Multipliers PH501 c/w Pump & Hoses PH751 c/w Pump & Hoses PH1501 c/w Pump & Hoses Pipe Bevel Machines 203B up to 4 206B up to 6 212B up to 12 Hand Operated Torque Wrenches / Multipliers Range 20ft lbs - 18,000ft lbs ½ sq dr ¾ sq dr Range Up to 7000nm 393B 1 sq dr Torque Multiplier 4340 nm TTM 70 1 ½ sq dr Torque Multiplier 7000 nm
10 MISCELLANEOUS Hydraulic Torque Equipment 1BT Hydraulic Wrench Hydraulic Torque pump Notes
11 STOCKISTS OF Webbing Slings Round Slings Ratchet Straps Rotabroach Cutters Cutting Fluid Burrs Cutting/Grinding Discs Air Fittings Diamond Blades Shackles Eyebolts Drill Bits Impact Sockets 1/2 to 11/2 SQ DR Safety Harness Fein saw Blades REMS Blades Hacksaw Blades Chainslings Chainblocks Lever Hoists
12 Middlesbrough John Gibson Hire & Sales Ltd Queensway Middlesbrough TS3 8TF
FACILITY ACCREDITATION CHECKLIST #001 APPRENTICESHIP. Rating Code: Y = Yes * N = No * R = Required * AUDIT AREA: DATE: / / HAND TOOLS Y N R
FACILITY ACCREDITATION CHECKLIST #001 APPRENTICESHIP Designated Trade: Level 1 2 3 4 Institution: Evaluator(s) / / Rating Code: Y = Yes * N = No * R = Required * * Please use a CHECKMARK under the appropriate
More informationImportant: Please read these instructions carefully and completely before starting the installation. TITAN Fuel Tanks
TITAN pt. no.: 03 0000 0120 Important: Please read these instructions carefully and completely before starting the installation. TITAN Fuel Tanks INSTALLATION INSTRUCTIONS G e n e r a t i o n V Extended
More informationTITAN Fuel Tanks. INSTALLATION INSTRUCTIONS G e n e r a t i o n V
TITAN pt. no.: 02 0000 0143 Important: Please read these instructions carefully and completely before starting the installation. TITAN Fuel Tanks INSTALLATION INSTRUCTIONS G e n e r a t i o n V Extended
More informationEVALUAT ING ACADEMIC READINESS FOR APPRENTICESHIP TRAINING Revised for ACCESS TO APPRENTICESHIP
EVALUAT ING ACADEMIC READINESS FOR APPRENTICESHIP TRAINING for ACCESS TO APPRENTICESHIP SCIENCE SKILLS SIMPLE MACHINES & MECHANICAL ADVANTAGE AN ACADEMIC SKILLS MANUAL for The Construction Trades: Mechanical
More information2 BOXES OF HEAVY DUTY MACHINE LIFTING BRACKETS
272 12 RUBBERMAID 4-WHEEL CARTS 40 x 16 x 32 AND 40 x 25 x 32 271 12 RUBBERMAID 4-WHEEL CARTS 40 x 25 x 32 416 11 ASSORTED SHOP CARTS 418 118 x 50 WIDE 10 TON TRANSFER CART, WITH PNEUMATIC CONTROLS 37
More informationABC-CMEF Craft Training Program CORE Audit Checklist
ABC-CMEF Craft Training Program CORE Audit Checklist Training Unit: Teacher: Auditor: Date: This audit should not be construed as a "safety" audit. The audit team reviewing the facility is charged with
More informationEQUIPMENT LIST. Your. www.1rentaldepot.com Hours Monday Friday 7:00 a.m. 5:00 p.m. Saturday 8:00 a.m. 12:00 noon. Partner in the Planning
www.1rentaldepot.com Hours Monday Friday 7:00 a.m. 5:00 p.m. Saturday 8:00 a.m. 12:00 noon Saint Petersburg 4895 34 th Street North (727) 528-1588 EQUIPMENT LIST Your Partner in the Planning for all Your
More informationMission. Directors: L to R standing Greig Laughlin, Anthony Buxo, Mark Laughlin, Andre John,
Corporate Profile Laughlin & de Gannes (LDG) was established in 1949 as a supplier of automotive products, to service the needs of the motoring public. Over the past 54 years, the Company has diversified
More informationMAKE OF AUTOMOBILE: NUMBER : 076/0800901 DATE : 2008-12-08 Copyright Prins Autogassystemen B.V. 2008 VERSION NR : 2008-10-24 B
MAKE OF AUTOMOBILE: HONDA TYPE: CIVIC PISTON DISPLACEMENT: 1800 NUMBER OF VALVES: 16 ENGINE NUMBER: R18A TYPE VSI INJECTOR ( COLOR ) ORANGE MODEL YEAR: 2008 ENGINE SET NUMBER 348/0250200.07 NUMBER : 076/0800901
More informationOwner s Manual Gantry Cranes
Owner s Manual Gantry Cranes Fixed Height Gantry Crane MODEL NUMBER: SERIAL NUMBER: CAPACITY IN TONS: Telescoping Gantry Crane Bushman AvonTec 262-790-4200, 800338-7810, Fax 262-790-4200 www.bushmanavontec.com
More informationSAMPLE TEST QUESTIONS STEAMFITTER/PIPEFITTER - ITA WEBSITE
1 Which tool is used to correct internal hi-low when preparing a 4-in. steel pipe for welding? A. 4-in. grinder with cutting disc. B. Mini-grinder with flapper disc. C. Pencil grinder with cone stone.
More information2100 AD 015 0009 Mirror Elevator Ball Nut Replacement Procedure
2100 AD 015 0009 Mirror Elevator Ball Nut Replacement Procedure Derek Guenther 1/28/2015 Rev. Purpose The purpose of this document is to describe the procedure necessary to replace one of the ball nuts
More informationJob-Site Tooling and Equipment for the Construction Industry. Rentals Sales Service & Repairs
Job-Site Tooling and Equipment for the Construction Industry Rentals Sales Service & Repairs Sales Servicing the construction industry since 1973 with dependable products and service. Offering both rentals
More information2010 APPLICATION REFERENCE GUIDE
2010 APPLICATION REFERENCE GUIDE INDEX QUALITY POLICY 2 ERGO ASSIST STANDARD 4-13 CUSTOM 14-18 END EFFECTORS 19-24 LIFT ASSIST 25-41 FIXTURED TOOLS 42-53 FIXTURES 54-63 ASSEMBLY TABLES 64-72 CARTS/ DUNNAGE
More informationTITAN Fuel Tanks. Extended Capacity Replacement Tank for Diesel Chevrolet / GMC Trucks
Important: Please read these instructions carefully and completely before starting the installation. TITAN Fuel Tanks INSTALLATION INSTRUCTIONS G e n e r a t i o n V Extended Capacity Replacement Tank
More informationall VAC LIFT ALL-VAC-LIFT Phone + 1.832.615.9110 4621 Redstart Street www.vac-lift.com Fax + 1.832.201.9101
ergonomic FORKLIFT vacuum ATTACHMENTs FOR ALL MATERIALS HANDLING FOR LIFTING METAL, WOOD, PLASTIC, STONE, CONCRETE, PAPER, AND MORE In Warehousing, Order Picking, Palletizing, Loading, Conveying, Production.
More informationFront axle components, overview
just a test. Front axle components, overview 40-1 General Information Load bearing components and parts of the suspension must not be welded or straightened. Vehicles without drive axle must not be moved,
More informationPLM series Permanent load lifting magnets
Lifting gear Load lifting magnets/chain hoists PLM series Permanent load lifting magnets Load-bearing capacity of up to 1 t depending on model despite light weight High standard of safety with simple lever
More information$117.99 $31.99 $39.99 $23.99. Things to consider when buying your next socket set:
D004006 47 Piece 6 Point Standard/Deep SAE/Metric Socket Set SAE Standard: 3/16"-9/16" SAE Deep: 3/16"-9/16" Metric Standard: 4-14 mm Metric Deep: 4-12 mm 2", 6" Extensions Hand Driver U-Joint 45 Tooth
More informationAIR OPERATED OIL PUMPS AND KITS
PM 2 AIR OPERATED OIL PUMPS AND KITS PM 2 Oil pump, pressure ratio : 0 Double acting air operated pumps for transferring lubricants and other non-corrosive fluids. Pump includes bung adapter. New Model
More informationINSTRUCTIONS THOROUGHLY BEFORE BEGINNING***************
Bill of Materials: RAC0012 Green Wing Aerodynamic Skirt Kit Item Part Number Description Quantity 1 RMC0218 Gen 2 Trailer Skirt Roadside 1 2 RMC0219 Gen 2 Trailer Skirt Curbside 1 3 RMC0041 Trailer Skirt
More informationPIPING TRADES. STUDENT GRADE RECORD Career & Technical Education WINDHAM SCHOOL DISTRICT. Course Outline Modules. Student Name TDCJ #
STUDENT GRADE RECORD Career & Technical Education WINDHAM SCHOOL DISTRICT Student Name TDCJ # Social Security Number Certified Craft Instructor Certified Craft Instructor Code Unit WSD Certificate Y /
More informationVolkswagen Jetta, Golf, GTI 1999, 2000 Brake System 47 Brakes - Hydraulic Components (Page GR-47)
47 Brakes - Hydraulic Components (Page GR-47) FS III front brake calipers, servicing Front brake caliper piston, removing and installing FN 3 front brake calipers, servicing Front caliper piston, removing
More informationHow To Launch A Rocket From A Formica
Building the Basic Bottle Rocket Launch Pad Materials: -Formica double-sink countertop cutout. This can be easily and cheaply obtained from a local company that manufactures and/or installs countertops.
More informationCAM-03, Camshaft Assembly Oil Seal Replacement
CAM-03, Camshaft Assembly Oil Seal Replacement Tools Jack stands Floor Jack Metric Socket set Metric Wrench set Porsche Timing Belt Tension tool (P9201) Flywheel Lock (P9206) Balance Shaft Pin Spanner
More informationHeavy Duty Equipment Mechanic (Class Code 3743) Task List. Inspection and Diagnosis
Heavy Duty Equipment Mechanic (Class Code 3743) Task List Inspection and Diagnosis In order to verify complaints and determine malfunctions a Heavy Duty Mechanic: 1. Reads operators written trouble reports,
More informationINSTALL INSTRUCTIONS KK-C-HVAC-1 HVAC UNIT 2003-2014 CHEVROLET/GMC VANS FOR
INSTALL INSTRUCTIONS KK-C-HVAC-1 HVAC UNIT 2003-2014 CHEVROLET/GMC VANS FOR (For NEW 2007 ALL WHITE KWIK-KITS ONLY) Warning do not attempt to install A/C units unless you are experienced with servicing
More informationSlings, Rigging and Lifting Equipment
A printed or saved copy is an UNCONTROLLED copy. Check that it is the latest available version before use. Title: Number: SLINGS, RIGGING AND LIFTING EQUIPMENT GM-11-038-02 Version Number: 13.0 Date Revised:
More informationNOTE ON PERFORMANCE TESTING
NOTE ON PERFORMANCE TESTING Performance Profile Sheet(s) are included in a format that can be easily photocop ied for each trainee. Performance tests are designed to mea sure competency in the tasks taught
More information10% Buyers Premium (GST Inclusive) Photographs Available @ www.tvaa.com.au. INSPECTION From 8am Day of Sale
10% Buyers Premium (GST Inclusive) Photographs Available @ www.tvaa.com.au INSPECTION From 8am Day of Sale ON-SITE SAFETY REQUIREMENTS Attendees Must Wear Covered Footwear COLLECTION All Items Must Be
More informationRange Road RR Series Semi-Automatic Firewood Processor. Crated Unit Assembly Manual
Range Road RR Series Semi-Automatic Firewood Processor Crated Unit Assembly Manual 1 1) Undo 8-18mm x 19mm Nuts and bolts, 2 on each leg of top frame 2) Lift top of Metal crate off and move out of work
More information367 000 Suction assembly for 1.000 l IBC and 205 l drums 1.060 mm suction tube. 367 003 Suction assembly for tanks 1.600 mm suction tube.
PUMPMASTER 2 accessories, other MOBILE oil dispensers PumpMaster 2 Accessories 01 OIL PUMPS 360 1 360 120 367 000 367 011 369 910 360 1 Wall bracket 360 120 Floor bracket 360 001 Bung adaptors 2" (M) connection
More informationAUTOMOTIVE SERVICE TECHNOLOGY BASIC TOOL LIST
AUTOMOTIVE SERVICE TECHNOLOGY BASIC TOOL LIST All automotive students are required to provide their own hand tool set. The following list of tools will serve as a guide for Automotive Service Technology
More informationUNITED STATES CUTTING TOOL INSTITUTE Product Groupings for Standards Activities CUTTING TOOL PRODUCTS
CUTTING TOOL PRODUCTS 1. BORING ISO 5609 Boring bars for indexable inserts Dimensions ISO 6261 Boring bars (tool holders with cylindrical shank) for indexable inserts Designation JIS B 4128 Boring bars
More informationStep-by-step instructions:
Spark plug thread repair for Ford Triton cylinder heads Step-by-step instructions: Identification Installation Verification Specifically designed and tested for 4.6L, 5.4L, and 6.8L 2 and 4 valve heads,
More informationP7100 PUMP INSTALLATION INSTRUCTIONS Diesel Care & Performance Inc
P7100 PUMP INSTALLATION INSTRUCTIONS Diesel Care & Performance Inc Installation Timing Pin Location CAUTION: Before installing the injection pump, be sure that number 1 cylinder is at the Top Dead Center
More informationAllspeeds Ltd. Royal Works, Atlas St Clayton le Moors Accrington Lancashire England BB5 5LW. Tel +44 (0)1254 615100
Allspeeds Ltd. Royal Works, Atlas St Clayton le Moors Accrington Lancashire England BB5 5LW Tel +44 (0)1254 615100 www.allspeeds.co.uk HOSE/UMBILICAL CUTTER HCV155 PRODUCT CODE No. 980217 INSTRUCTIONS
More information2015 JOBSITE EQUIPMENT RENTAL RATES
2015 JOBSITE EQUIPMENT RENTAL RATES Effective May 14, 2015 HOISTING & RIGGING WEEKLY 4 WEEKS Chainfall (CERTIFIED) Rates listed are based on 20' lift * Lifts available up to 100 ft. 1/2 ton 33 67 1 Ton
More informationGPS AutoSteer System Installation Manual
GPS AutoSteer System Installation Manual Supported Vehicles John Deere Sprayers 4720 4630 4730 4830 AutoTrac Ready PN: 602-0227-01-A LEGAL DISCLAIMER Note: Read and follow ALL instructions in this manual
More information413 NOVA SYSTEM PAN AMERICAN TOOL CORPORATION 5990 NW 33309-2208 PHONE (954)735-8665 TOLL FREE 1-800-423-2764 FAX
413 NOVA SYSTEM 5990 NW 31st Avenue Ft. Lauderdale, Florida 33309-2208 PHONE (954)735-8665 TOLL FREE 1-800-423-2764 FAX (954)735-8668 2013 Pan American Tool Corporation 2013 TERMS AND CONDITIONS TERMS:
More informationVibration and Noise Information
Author TOOJH Rev(1) Product Ergonomics & Industrial Design 9 Jan -14 Page 1(25) Vibration and Noise Information VIBRATION AND NOISE INFORMATION... 1 INTRODUCTION... 2 GENERAL INFORMATION VALID FOR MOST
More informationVW Caddy W21-760-3503 INSTALLATION INSTRUCTIONS
Unit 626 Kilshane Avenue, North West Business Park, Ballycoolin, Dublin 15, Ireland Telephone: +353 1 8612 632, Fax: +353 1 8612 647, email: sales@driveriteltd.com www.driveriteltd.com VW Caddy W21-760-3503
More informationREAD AND UNDERSTAND ALL INSTRUCTIONS AND WARNINGS PRIOR TO INSTALLATION OF SYSTEM AND OPERATION OF VEHICLE.
491 W. Garfield Ave., Coldwater, MI 49036 Phone: 517-279-2135 Web/live chat: www.bds-suspension.com E-mail: tech-bds@sporttruckusainc.com Product: GM Leaf Spring READ AND UNDERSTAND ALL INSTRUCTIONS AND
More informationDEMOLITION Photocopy this profile and distribute it as widely as possible!
Musculoskeletal hazards and controls DEMOLITION Photocopy this profile and distribute it as widely as possible! Musculoskeletal disorders (MSDs), such as chronic back pain or shoulder problems, often take
More informationTool Holder Catalog INDEX ABC VDI 25 LL3602.30051-10.04.2014. 0414/Rö
Tool Holder Catalog INDEX ABC VDI 25 LL3602.30051-10.04.2014 0414/Rö Disclaimer The illustrations in this documents may deviate from the delivered product. We reserve the right to make changes due to errors
More informationREGISTRATION OF INTEREST
A B C Adhesives and Sealants Advertising Air Cargo Transport Air Conditioners Air Conditioning Installation or Maintenance or Repair Services Air Filters Ambulance Services Arborist Services Architectural
More informationALLDATA Online - 2006 Dodge Truck RAM 2500 Truck 2WD L6-5.9L DSL Turbo VI... Service and Repair
Page 1 of 15 Home Account Contact ALLDATA Log Out Help PAUL REDEHOFT Select Vehicle New TSBs Technician's Reference Component Search: OK 2006 Dodge Truck RAM 2500 Truck 2WD L6-5.9L DSL Turbo VIN C Conversion
More informationUnit LT01 Carry Out Routine Lift Truck Maintenance
Unit LT01 Carry Out Routine Lift Truck Maintenance UNIT OVERVIEW This unit is about conducting routine maintenance, adjustment and replacement activities as part of the periodic servicing of Lift Trucks.
More informationA U T O M O T I V E L I F T S
Q U A L I T Y Y O U E X P E C T AT A P R I C E Y O U W O U L D N T T H E S TA N D A R D I N I N F O R M AT I O N, E Q U I P M E N T A N D D I A G N O S T I C S S Y S T E M S h t t p : / / d i a g n o s
More informationREMOVAL AND INSTALLATION
303-01C-1 REMOVAL AND INSTALLATION Engine Body On Special Tool(s) Adapter For 303-D043 303-D043-02 or equivalent Special Tool(s) 303-01C-1 Turbocharger Lifting Bracket 303-1266 Wrench, Fan Clutch Nut 303-214
More informationMKV Golf GTI Rear Brake Service - Replace Pads and Rotors
Page 1 Installation Procedures MKV Golf GTI Rear Brake Service - This tutorial is provided as a courtesy by ECS Tuning. Proper service and repair procedures are vital to the safe, reliable operation of
More informationIF YOU NEED A POLE BARN OR DIY KIT CALL NOW AND LETS MAKE A DEAL
IF YOU NEED A POLE BARN OR DIY KIT CALL NOW AND LETS MAKE A DEAL Check out our Affordable Selection of DIY Pole Barn kit sizes and prices below. We offer a complete DIY pole barn kit plus independent experienced
More informationLIFTING HIRE. General Lifting Equipment Material Handling Moving & Winching Crane & Site Jacking Equipment Load Measuring Safety & Access
LIFTING HIRE. General Lifting Equipment Material Handling Moving & Winching Crane & Site Jacking Equipment Load Measuring Safety & Access LIFTING HIRE GENERAL LIFTING. MANUAL CHAINBLOCKS Designed for easy
More informationCHICAGO PNEUMATIC SPRING 2013. Gyldig til 30062013. Alle priser i NOK, nto. eks. mva. Maintenance. People. Passion. Performance.
CHICAGO PNEUMATIC SPRING 2013 Gyldig til 30062013 Alle priser i NOK, nto. eks. mva. Maintenance People. Passion. Performance. CP7729 CP7748 2172,- ³ ₈, 563 Nm, 1,26 kg Art nr 894 107 7290 2333,- ½, 1250
More informationM113 VEHICLE FAMILY RUBBER TRACK INSTALLATION INSTRUCTIONS SOUCY TRACK SYSTEM 04-M113-1ENS (SPLIT IDLER) Litho d in Canada 1 04-M113-1ENS
M113 VEHICLE FAMILY RUBBER TRACK INSTALLATION INSTRUCTIONS (SPLIT IDLER) 1 # TABLE OF CONTENTS List of parts and tools................................................3 Installation of complete kit...................................................5
More informationOperating, Installation, and Maintenance Instructions
ELKHART BRASS MFG. CO., INC. 1302 WEST BEARDSLEY AVENUE P.O. BOX 1127 ELKHART IN 46515 (574) 295-8330 FAX (574) 293-9914 Operating, Installation, and Maintenance Instructions RAM Personal Portable Monitor
More informationELLIOTT COLLET STYLE Baffle Expander With Hydraulic Power Supply
TM-37 07-29-04 Elliott offers a complete line of precision tube tools, including: tube expanders Boiler Expanders Heat Exchanger Expanders Condenser Expanders Refinery Expanders tube rolling motors & torque
More informationCOOPER S PULLEY UPGRADE KIT INSTALLATION INSTRUCTIONS PART NUMBER NME5011
COOPER S PULLEY UPGRADE KIT INSTALLATION INSTRUCTIONS PART NUMBER NME5011 Below are instructions for the Mini Mania Pulley Upgrade Kit, Part Number NME5011. Please take all necessary precautions for working
More informationMEMBERS ASSESSMENT BOOKLET TO GAIN ENTRY LEVEL QUALIFICATION FOR INTRODUCTION TO VEHICLE TECHNOLOGY
l MEMBERS ASSESSMENT BOOKLET TO GAIN ENTRY LEVEL QUALIFICATION FOR INTRODUCTION TO VEHICLE TECHNOLOGY BY IMIAL Entry Level Award for the Introduction to Vehicle Technology (Entry 3) (QCF) QFQUAL I.D: 501/0549/8
More informationInstallation information. METTLER TOLEDO MultiRange Floor scales / Pit scales
Installation information METTLER TOLEDO MultiRange Floor scales / Pit scales KC300/KCS300 KC600/KCS600 KD600/KD1500 KE1500/KE3000 KES1500/KES3000 KG3000/KG6000 KN1500 Floor scales / Pit scales Contents
More information18. CARGO TROLLEYS, LIFTING TABLES, HYDRAULIC TABLE TRUCKS, HAND TROLLEYS
18. CARGO TROLLEYS, LIFTING TABLES, HYDRAULIC TABLE TRUCKS, HAND TROLLEYS CARGO TROLLEYS LIFTING TABLES HYDRAULIC TABLE TRUCKS HAND TROLLEYS 18 CARGO TROLLEYS CARGO TROLLEYS 1500 KG groove in the centre
More informationUnit 24: Applications of Pneumatics and Hydraulics
Unit 24: Applications of Pneumatics and Hydraulics Unit code: J/601/1496 QCF level: 4 Credit value: 15 OUTCOME 2 TUTORIAL 2 HYDRAULIC AND PNEUMATIC CYLINDERS The material needed for outcome 2 is very extensive
More informationSAFE USE OF LIFTING EQUIPMENT
Golden Rule 6 Mechanical Lifting SAFE USE OF LIFTING EQUIPMENT Do not operate any lifting equipment unless It has been approved for use The lift has been assessed by a competent person The load has been
More informationLoad Testing and Lift Engineering
177 Load Testing and Lift Engineering In today s business climate, the importance of reliable, verifiable load testing cannot be overstated. When your lift weighs hundreds or thousands of tons and is worth
More informationL I V E T O O L F O R O K U M A
L I V E T O O L F O R O K U M A The Way to Success [Heimatec headquarters-germany] Heimatec is an international manufacturing company headquartered in Renchen, Germany. Heimatec s 40,000 square foot facility,
More information2003 ACCORD - Automatic Transmission Removal
2003 ACCORD - Automatic Transmission Removal Special Tools Required Engine support hanger, A and Reds AAR-T-12566 Engine hanger balancer bar VSB02C000019 Front subframe adapter VSB02C000016 These special
More informationXL PREMIUM OIL COOLER KIT
-J05 REV. 0-0-0 XL PREMIUM OIL COOLER KIT GENERAL Kit Number 0008 Models For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English
More informationChar-Lynn Hydraulic Motor. Repair Information. 10 000 Series. October, 1997
Char-Lynn Hydraulic Motor October, 1997 Repair Information Geroler Motor Two Speed 001 27 Retainer inside bore of valve plate bearingless motors only 4 15 16 3 6 35 Parts Drawing 25 2 2 1 19 17 36 40 47
More informationDiagnosing Hydraulic Problems
Diagnosing Hydraulic Problems 1 Problems A pressure test is a key check when you need to determine if a problem is caused by something that is inside or outside of the transmission. Low automatic transmission
More informationSPECIAL OFFER AUTUMN 2015
SPECIAL OFFER AUTUMN 2015 Impact wrenches CP7732 Art nr 8941077320 Ultra Compact & Powerful 1/2 Best power to weight ratio: 610 Nm Steel front cover & Aluminum body One hand operation forward reverse by
More informationQUALITY ENGINEERING & SERVICES W.L.L (A DIVISION OF QUALITY GROUP OF COMPANIES) ISO 9001 : 2008 CERTIFIED COMPANY COMPANY PROFILE
QUALITY ENGINEERING & SERVICES W.L.L (A DIVISION OF QUALITY GROUP OF COMPANIES) ISO 9001 : 2008 CERTIFIED COMPANY COMPANY PROFILE FABRICATION, MACHINING, METAL CASTING, LOAD TESTING, SAND BLASTING & PAINTING,
More informationTurbocharger system components, servicing
21-1 Turbocharger system components, servicing Engine codes: AAZ, 1Z, AHU Observe rules of cleanliness Page 21-10 Turbocharger hoses and lines, connecting Page 21-11 WARNING! Do not re-use any fasteners
More informationUNIT DESCRIPTION T4 T3 T2 T1
APPENDIX-D FOUR LEVELS OF US&R OPERATIONAL CAPABILITY MINIMUM EQUIPMENT LIST These lists identify the minimum amount of tools and equipment needed to provide a safe and acceptable level of service for
More informationTopics of the Presentation
Drill Rig Safety Topics of the Presentation Personnel safety and monitoring PPE Health (Drugs and Alcohol) Drill Rig operation Safe set up procedures Safe operation of machine Safety related accidents
More informationLesson Plans for Module 00101-15
Lesson Plans for Module 00101-15 Basic Safety (Construction Site Safety Orientation) Module One (00101-15) explains the importance of safety in the construction and industrial crafts. Trainees will learn
More informationINSTALLATION INSTRUCTIONS. 6108 Air Spring Kit 2011+ Ford F250 Single Wheel 4WD 2011+ Ford F350 Dually 4WD (2011 F350 Single Wheel 4WD use p/n 6113)
INSTALLATION INSTRUCTIONS 6108 Air Spring Kit 2011+ Ford F250 Single Wheel 4WD 2011+ Ford F350 Dually 4WD (2011 F350 Single Wheel 4WD use p/n 6113) Thank you for purchasing a quality Hellwig Product. PLEASE
More informationHMIS Top Drive System
System Description HMIS Top Drive System 250TON HMIS 475HP DOCUMENT NAME: 880025 REV 2 SYSTEM DESCRIPTION COPYRIGHT AND DISCLAIMER Tesco Corporation ("TESCO") has made every effort to ensure that this
More informationREFRIGERATION & AIR CONDITIONING
Musculoskeletal hazards and controls REFRIGERATION & AIR CONDITIONING Photocopy this profile and distribute it as widely as possible! Musculoskeletal disorders (MSDs), such as chronic back pain or shoulder
More information2003 Audi A4. AUDI' '3.0L V6 - AVK Engine - A4 & A6
Installation (A4) CAUTION: Before installation, ensure camshafts are aligned, crankshaft is locked in place and camshaft gear bolts are loose as described in removal procedures. When turning camshaft,
More informationCUSTOMER SUPPORT & SERVICES COMMERCIAL MILITARY 2013 SUPPORT EQUIPMENT CATALOG
COMMERCIAL MILITARY CUSTOMER SUPPORT & SERVICES 2013 SUPPORT EQUIPMENT CATALOG GENERAL INFORMATION In order to further expand the level of support and service our operators are accustomed to, we at Bell
More informationMachine Moving. By Norm Berls
Machine Moving By Norm Berls Machine Moving Sources Metalworking: Sink or Swim by Tom Lipton Google Images Vendor Web Pages YouTube Own experiences Formerly professional riggers and movers moved most heavy
More informationSTEADYfast Stabilizer Installation Notes Fifth Wheel and Travel Trailers 11/23/13
STEADYfast Stabilizer Installation Notes Fifth Wheel and Travel Trailers 11/23/13 (See Supplemental Instructions for trailers with heavy duty round footplates and/or Power Leveling Systems) PHONE SUPPORT
More informationJoplin Rebuild Instructions
Joplin Rebuild Instructions This is a step by step list of instruction on how to rebuild the Crankbrothers Joplin post. It may not always be required to completely tear-down the post to do the work needed
More informationSafe, clean and reliable overfill protection systems. HYDRAU-FLO Safety Solutions for Liquid Filling
HYDRAU-FLO Safety Solutions for Liquid Filling Excellent Minerals Solutions Mechanical and non-pressurised fuel filling valves Safe, clean and reliable overfill protection systems Refuelling rates up to
More informationSTEERING SYSTEM - POWER
STEERING SYSTEM - POWER 1990 Nissan 240SX 1990 STEERING Nissan - Power Rack & Pinion Axxess, Maxima, Pulsar NX, Sentra, Stanza, 240SX, 300ZX DESCRIPTION The power steering system consists of a rack and
More informationWIRE ROPE CUTTERS. Designed for new and unused wire rope. Since 1928
WIRE ROPE CUTTERS Designed for new and unused wire rope Since 1928 IMPACT 101 104 106 108 103 105 107 109 Model 1 (light duty): Model 1 3 /4 capacity 101 Cutter complete 8 lbs. 102 Casting base 4 lbs.
More informationMGB Chrome Bumper Conversion
MGB Chrome Bumper Conversion Installation Instructions For 1974 1/2-1980 MGB This kit requires cutting, welding, and painting. Professional installation recommended. Note: Every MGB body is slightly different
More information123 Industrial Loop Road Paynesville, MN 56362 Phone: 1-800-864-1649 www.master-mfg.com
123 Industrial Loop Road Paynesville, MN 56362 Phone: 1-800-864-1649 www.master-mfg.com INTRODUCTION The purpose of this manual is to assist you in the assembly, operation and maintenance of your sprayer
More informationAuxiliary Rams USERS MANUAL
Auxiliary Rams 2007 Chief Automotive Technologies, Inc. Chief s Limited One-Year Warranty & Liability CHIEF'S LIMITED ONE-YEAR WARRANTY & LIABILITY Chief Automotive Technologies, Inc. warrants for one
More informationEQUALIZER International Limited Range of Mechanical & Hydraulic Flange Spreading Wedges Operator Instruction Manual. B bestflangespreader
EQUALIZER International Limited Range of Mechanical & Hydraulic Flange Spreading Wedges Operator Instruction Manual B bestflangespreader com INDEX THE EQUALIZER RANGE OF MECHANICAL & HYDRAULIC SPREADING
More informationHand and Portable Powered Tool Safety
Hand and Portable Powered Tool Safety Chicago, IL St. Louis, MO (847) 463-7239 www.assuranceagency.com Overview It s easy to pick up and use a tool without stopping to think about its hazards. It is difficult
More informationWinchester Equipment Rental Rates 121 Indian Hollow Rd Winchester, VA 1(800) 323-3581
Winchester Equipment Rental Rates 121 Indian Hollow Rd Winchester, VA 1(800) 323-3581 SKID STEER LOADERS R.O.C. S70 $160 $475 $1105 700 LBS S450/S510 $225 $665 $1655 1300-1600 LBS S530/S570/S590/ $265
More informationUNDERWATER ENGINEERING SERVICES. Visit Us Online At www.uesltd.net Part of the ATR Group
UNDERWATER ENGINEERING SERVICES Visit Us Online At www.uesltd.net Part of the ATR Group PART OF THE ATR GROUP Global Equipment Specialists THE ATR DIVISIONS At ATR, we believe we re the logical choice
More informationSERVICE PARTS LIST PAGE 1 OF 6 BASE ASSEMBLY SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 12" DUAL BEVEL COMPOUND MITER SAW B27A
PAGE 1 OF 6 BASE ASSEMBLY 00 0 EXAMPLE: Component Parts (Small #) Are Included When Ordering The Assembly (Large #). SPECIFY CATALOG NO. AND NO. WHEN ORDERING PARTS 1 02-80-0050 Thrust Bearing (1) 2 05-80-0510
More informationFJ2. 2 Ton Trolley Floor Jack Assembly & Operating Instructions
FJ2 2 Ton Trolley Floor Jack Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. This manual provides important information on proper operation & maintenance.
More informationIndustrial Torque Solutions
Industrial Torque Solutions Who we are One Company, Total Support, Complete Solutions Over many years Hydratight has provided world class bolted joint solutions and continues to set international standards
More informationMaster Catalogue I August 2011
Master Catalogue I August 2011 Greasing Equipment Drum Pumps Hose Reels Vehicle Hoists Wheel Service Equipment Lubrication Systems 58 Waste Oil Handling, Spill Containment & Lighting 372000 SAMOA Mobile
More informationDirective 2006/42/EC Classification of equipment used for lifting loads with lifting machinery
1(7) Classification of equipment used for lifting loads with lifting machinery December 2009 This classification was approved by the Machinery ing Group as a basis for a consistent application of the term
More informationPaLLe t trucks Lifting carts t r g in t if L 2435 6815 6836 6856 6842
l i f t i n g c a r t s Lifting carts The prograe for lifting, transporting and storage From the classical forklift trolley to the machine lifter, from furniture dollies to a chassis with 24 tons load
More informationApprenticeship Training Standard. Schedule of Training. Hydraulic/Pneumatic Mechanic. Trade Code: 277Z. Development Date: 2000
Apprenticeship Training Standard Schedule of Training Hydraulic/Pneumatic Mechanic Trade Code: 277Z Development Date: 2000 This document is the property of the apprentice named inside and represents the
More information