413 NOVA SYSTEM PAN AMERICAN TOOL CORPORATION 5990 NW PHONE (954) TOLL FREE FAX
|
|
|
- Domenic Wilcox
- 7 years ago
- Views:
Transcription
1 413 NOVA SYSTEM 5990 NW 31st Avenue Ft. Lauderdale, Florida PHONE (954) TOLL FREE FAX (954) Pan American Tool Corporation 2013
2 TERMS AND CONDITIONS TERMS: Net 10th and 25th. DELIVERY: F.O.B. our plant, Fort Lauderdale, Florida CREDIT: On application by rated companies. Visa, Mastercard, American Express, Discover and IMPAC Cards accepted. MINIMUM ORDER: Minimum order $ All prices quoted in U.S. dollars. Overseas shipments available. C.O.D. shipments plus $9.00. WARRANTY: Pan American Tool Corporation tools are warranted against all defects in material or workmanship, when used for the purpose for which the tool was designed. CLAIMS: All claims must be made no later than 10 days after receipt of merchandise. RETURNS: Any defective tool must be returned freight prepaid to Pan American Tool Corporation, and will be repaired, replaced, or credited, provided it has not been misused or abused in any manner. TABLE OF CONTENTS Standard Nova Heads on Motor Housings...4 Nova 90º Angle Head...5 Nova Long Reach 90º Angle Head...6 Nova 45º Angle Head...7 Nova Long Reach 45º Angle Head...8 Nova 360º Angle Head...9 Nova Reversing Motor Housing...10 Nova 90º Short Flat Offset Angle Head Nova 90º Medium Flat Offset Angle Head...12 Nova 90º Long Flat Offset Angle Head...13 Nova Flat Offset Angle Head...14 Nova Long Reach Flat Offset Head...15 Nova 90º Angle Head with 1/ Chuck...16 Standard Nova System Kit...17 Compact Nova Heads on Compact Housings...18 Nova 360º Compact Angle Head...19 Nova 90º Compact Angle Head...20 Nova Long Reach 90º Compact Angle Head...21 Nova 45º Compact Angle Head...22 Nova Long Reach 45º Compact Angle Head...23 Nova 90º Compact Flat Offset Angle Head...24 Compact Nova System Kit...25 Nova Pistol Grip Drills...26 Nova Compact Pistol Grip Drill...27 Nova Horsepower Pistol Grip Drill...28 Nova 1300 High Torque Compact Pistol Grip Drill...29 Nova 650 High Torque Compact Pistol Grip Drill...29 Nova 900 High Torque Pistol Grip Drill...30 Nova 2000 Heavy Duty Reversible 3/8 Pistol Grip Drill...31 Nova Compact Reversing Drill...32 Nova Complete Motor Mounted Micro-Stop Cage...33 Nova Flat Offset Angle Attachments...34 Optional Accessories...35 Cleco Installation Tools...36 Nova Hex Nut Cleco Installation Tool...37 Nova 90º Grinder...38 Nova Straight Grinder...38 Nova Pencil Grinder...39 Engraving Pen...39 Stylus...39 STANDARD NOVA DRILL CUT AWAY Accepts 1/4-28 WARNING: Always wear proper eye protection when working with any cutting tools. 1. One Piece Hardened Spindle Gear 2. Grease Fittings in Motor Housing and Head 3. Closed Case Bearings Top and Bottom 4. In Line Air Regulator 7 5. Housing is Milled from One Piece of Solid Stock for Precision Operation 6. Rear Exhaust with Bronze Muffler 7. Hardened Alloy Steel Planetary Gears, Motor Cylinder and Rotor 2 3
3 STANDARD NOVA HEADS ON MOTOR HOUSINGS NOVA 90º ANGLE HEAD NOVA 90º ANGLE NOVA LONG REACH 90ºANGLE NOVA 45º ANGLE 31/32" Part # Weight.4 Lbs. $ Each See Page 5 See Page 6 See Page 7 NOVA LONG REACH 45º ANGLE NOVA 360º ANGLE NOVA COMPACT REVERSIBLE MOTOR HOUSING 41/6 7 1/ See Page 8 See Page 9 See Page 10 NOVA 90º SHORT FLAT OFFSET NOVA 90º MEDIUM FLAT OFFSET NOVA 90º LONG FLAT OFFSET HP HP HP HP See Page 11 See Page 12 See Page 13 NOVA FLAT OFFSET See Page 14 See Page 15 NOVA LONG REACH FLAT OFFSET NOVA 90º HEAD W/ 1/ CHUCK See Page 16 COMPLETE NOVA TOOL 90º Angle Head 90º Angle Head 90º Angle Head 90º Angle Head Lbs. $ A Lbs. $ Lbs. $ Lbs. $
4 NOVA LONG REACH 90º ANGLE HEAD NOVA 45º ANGLE HEAD 7 3/8" 4 3/ 31/32" # Weight.6 Lbs. $ EACH # Weight.5 Lbs. $ EACH 41/6 41/6 7 1/ 7 1/ HP HP HP HP HP HP HP HP COMPLETE NOVA TOOL COMPLETE NOVA TOOL Long Reach 90º Angle Head Long Reach 90º Angle Head Long Reach 90º Angle Head Long Reach 90º Angle Head Lbs. $ A Lbs. $ Lbs. $ Lbs. $ º Angle Head 45º Angle Head 45º Angle Head 45º Angle Head Lbs. $ A Lbs. $ Lbs. $ Lbs. $
5 NOVA LONG REACH 45º ANGLE HEAD NOVA 360º ANGLE HEAD 4 5/1 8" # Weight.7 Lbs. $ EACH # Weight.7 Lbs. $ EACH 3 1/ 41/6 41/6 31/32" 7 1/ 7 1/ HP HP HP HP HP HP HP HP COMPLETE NOVA TOOL COMPLETE NOVA TOOL Long Reach 45º Angle Head Long Reach 45º Angle Head Long Reach 45º Angle Head Long Reach 45º Angle Head Lbs. $ A Lbs. $ Lbs. $ Lbs. $ º Angle Head 360º Angle Head 360º Angle Head 360º Angle Head Lbs. $ A Lbs. $ Lbs. $ Lbs. $
6 NOVA REVERSING MOTOR HOUSING 2000 or 3100 NOVA 90º SHORT FLAT OFFSET ANGLE HEAD THREADED SPINDLE OR 1/ HEX DRIVE 5 1/ 3/ Compatible With All Standard Nova Heads 5 1/ HP Weight 1.6 Lbs. Part # $ Each HP Weight 1.6 Lbs. Part # $ Each 7/1 5/1 5/1 3 5/1 Part # Weight.6 Lbs. $ Each Part #90-011H Weight.6 Lbs. $ Each Reversing Housing With Spline Drive For Use With Standard Nova Heads Feathering Trigger Allows Operator Complete Control of Drilling Speed 360º Rotatable Exhaust Rubber Grip for Operator Comfort Reversing Button 7 1/ These Recommended Nova Heads Will Utilize The Reversing Option Heads Available with Threaded or 1/ Hex Drive. Locking Insert Bits Are Available HP HP HP HP HP Part # $ Each Threaded Gear Part # $ Each Threaded Gear Part # $ Each Hex Gear Part #90-011H $ Each Page 11 Hex Gear Part #90-044H $ Each 4 5/8" Threaded Gear Part # $ Each Hex Gear Part #90-012H $ Each Page 12 Threaded Gear Part # $ Each Threaded Gear Part # $ Each Hex Gear Part #90-013H $ Each Page /8" Hex Gear Part #90-043H $ Each Threaded Gear Part # $ Each Hex Gear Part #60-039H $ Each Page 14 Threaded Gear Part # $ Each Hex Gear Part #90-040H $ Each Page 15 or 1/ Insert Bits COMPLETE NOVA TOOL 90º Short Flat Offset Angle Head 90º Short Flat Offset Angle Head 90º Short Flat Offset Angle Head 90º Short Flat Offset Angle Head 90º Short Flat Offset Angle Head With.2 Horsepower Reversing Motor THREADED HEX WEIGHT PRICE H Lbs. $ A AH Lbs. $ H Lbs. $ H Lbs. $ H Lbs. $585.00
7 NOVA 90º MEDIUM FLAT OFFSET ANGLE HEAD THREADED SPINDLE OR 1/ HEX DRIVE NOVA 90º LONG FLAT OFFSET ANGLE HEAD THREADED SPINDLE OR 1/ HEX DRIVE 3/ 3/ 7/1 7/1 5/1 5/1 4 5/8" # Weight.8 Lbs. $ EACH #90-012H Weight.8 Lbs. $ EACH 5/1 5/1 # Weight.9 Lbs. $ EACH #90-013H Weight.9 Lbs. $ EACH Reversing Button Reversing Button 7 1/ 7 1/ HP HP HP HP HP Part # $ Each HP HP HP HP HP Part # $ Each or 1/ Insert Bits COMPLETE NOVA TOOL 90º Medium Flat Offset Angle Head 90º Medium Flat Offset Angle Head 90º Medium Flat Offset Angle Head 90º Medium Flat Offset Angle Head 90º Medium Flat Offset Angle Head With.2 Horsepower Reversing Motor THREADED HEX WEIGHT PRICE H Lbs. $ A AH Lbs. $ H Lbs. $ H Lbs. $ H Lbs. $ or 1/ Insert Bits COMPLETE NOVA TOOL 90º Long Flat Offset Angle Head 90º Long Flat Offset Angle Head 90º Long Flat Offset Angle Head 90º Long Flat Offset Angle Head 90º Long Flat Offset Angle Head With.2 Horsepower Reversing Motor THREADED HEX WEIGHT PRICE H Lbs. $ A AH Lbs. $ H Lbs. $ H Lbs. $ H Lbs. $670.00
8 NOVA FLAT OFFSET ANGLE HEAD 3 3/8" THREADED SPINDLE OR 1/ HEX DRIVE NOVA LONG REACH FLAT OFFSET HEAD THREADED SPINDLE OR 1/ HEX DRIVE 1 1/ 1 1/ 7/1 7/1 4 5/8" # Weight.5 Lbs. $ EACH # Weight.6 Lbs. $ EACH 5/1 #60-039H Weight.5 Lbs. $ EACH 5/1 #90-040H Weight.6 Lbs. $ EACH 5/1 5/1 Reversing Button Reversing Button 7 1/ 7 1/ HP HP HP HP HP Part # $ Each HP HP HP HP HP Part # $ Each or 1/ Insert Bits COMPLETE NOVA TOOL Flat Offset Angle Head Flat Offset Angle Head Flat Offset Angle Head Flat Offset Angle Head Flat Offset Angle Head With.2 Horsepower Reversing Motor THREADED HEX WEIGHT PRICE H Lbs. $ A AH Lbs. $ H Lbs. $ H Lbs. $ H Lbs. $ or 1/ Insert Bits COMPLETE NOVA TOOL Long Reach Offset Head Long Reach Offset Head Long Reach Offset Head Long Reach Offset Head Long Reach Offset Head With.2 Horsepower Reversing Motor THREADED HEX WEIGHT PRICE H Lbs. $ A AH Lbs. $ H Lbs. $ H Lbs. $ H Lbs. $585.00
9 NOVA 90º ANGLE HEAD WITH 1/ CHUCK STANDARD NOVA SYSTEM KIT 2800, 5000 or /2" # Weight.8 Lbs. $ EACH 3 3/ Specify Motor Housing.3HP 2800 or HP 3200 One Year Warranty 7 1/ HP HP HP HP ATTACHMENT CHOICES Nova 90º Angle Head - Part # p. 5 Nova 90º Short Flat Offset Angle Head - Part # p. 11 Nova Long Reach 90º Angle Head - Part # p. 6 Nova 90º Medium Flat Offset Angle Head - Part # p. 12 Nova 45º Angle Head - Part # p. 7 Nova 90º Long Flat Offset Angle Head - Part # p. 13 Nova Long Reach 45º Angle Head - Part # p. 8 Nova 90º Flat Offset Angle Head - Part # p. 14 Nova 360º Angle Head - Part # p. 9 Nova Long Reach Flat Offset Head - Part # p. 15 Motor Housing and Any 4 Attachments Excluding 360º Head.3HP 2800 Part # $ HP 5000 Part #60-029A $ HP 3200 Part # $ Motor Housing and Any 6 Attachments.3HP 2800 Part # $ HP 5000 Part #60-034A $ HP 3200 Part # $ COMPLETE NOVA TOOL 90º Angle Head With 1/ Chuck 90º Angle Head With 1/ Chuck 90º Angle Head With 1/ Chuck 90º Angle Head With 1/ Chuck With.3 Horsepower High Torque C Lbs. $ AC Lbs. $ C Lbs. $ C Lbs. $ Motor Housing and Any 3 Attachments Plus 360º Head.3HP 2800 Part # $ HP 5000 Part #60-037A $ HP 3200 Part # $ Motor Housing and Any 4 Attachments Plus 360º Head.3HP 2800 Part # $ HP 5000 Part #60-040A $ HP 3200 Part # $ Motor Housing and Any 7 Attachments.3HP 2800 Part # $ HP 5000 Part #60-041A $ HP 3200 Part # $ Motor Housing and All 10 Attachments.3HP 2800 Part # $ HP 5000 Part #60-042A $ HP 3200 Part # $
10 COMPACT NOVA HEADS ON COMPACT HOUSINGS NOVA 360º COMPACT ANGLE NOVA 90º COMPACT ANGLE NOVA LONG REACH 90º COMPACT ANGLE NOVA 360º COMPACT ANGLE HEAD 2 1" # Weight.6 Lbs. $ EACH 3 1/ 2 1/2" See Page 19 See Page 20 See Page 21 NOVA 45º COMPACT ANGLE NOVA LONG REACH 45º COMPACT ANGLE NOVA 90º COMPACT FLAT OFFSET ANGLE 41/6 31/32" 5 3/ See Page 22 See Page 23 See Page 24 COMPACT NOVA DRILL CUT AWAY HP Part # HP Part #90-004A $ Each HP Part #90-004B HP Part # Accepts 1/ COMPLETE NOVA TOOL 1. One Piece Hardened Spindle Gear 2. Grease Fittings in Motor Housing and Head 3. Closed Case Bearings Top and Bottom 4. In Line Air Regulator 5. Housing is Milled from One Piece of Solid Stock for Precision Operation 6. Rear Exhaust with Bronze Muffler 7. Hardened Alloy Steel Planetary Gears, Motor Cylinder and Rotor 360º Compact Angle Head with Compact 3000 Motor 360º Compact Angle Head with Compact High Torque 850 Motor 360º Compact Angle Head with Compact 6000 Motor 360º Compact Angle Head with Compact 3200 Motor Lbs. $ A Lbs. $ B Lbs. $ C Lbs. $
11 NOVA 90º COMPACT ANGLE HEAD NOVA LONG REACH 90º COMPACT ANGLE HEAD 2 1" 6 1/2" 1" 31/32" # Weight.4 Lbs. $ EACH 31/32" # Weight.6 Lbs. $ EACH 41/6 41/6 5 3/ 5 3/ HP Part # HP Part #90-004A $ Each HP Part #90-004B HP Part # HP Part # HP Part #90-004A $ Each HP Part #90-004B HP Part # COMPLETE NOVA TOOL COMPLETE NOVA TOOL 90º Compact Angle Head with Compact 3000 Motor 90º Compact Angle Head with Compact High Torque 850 Motor 90º Compact Angle Head with Compact 6000 Motor 90º Compact Angle Head with Compact 3200 Motor Lbs. $ A Lbs. $ B Lbs. $ C Lbs. $ Long Reach 90º Compact Angle with Compact 3000 Motor Long Reach 90º Compact Angle with Compact High Torque 850 Motor Long Reach 90º Compact Angle with Compact 6000 Motor Long Reach 90º Compact Angle with Compact 3200 Motor Lbs. $ A Lbs. $ B Lbs. $ C Lbs. $
12 NOVA 45º COMPACT ANGLE HEAD NOVA LONG REACH 45º COMPACT ANGLE HEAD 3 1/8" 1" 6 3/ 1" 1 1/ # Weight.4 Lbs. $ EACH 1 1/ # Weight.7 Lbs. $ EACH 41/6 41/6 5 3/ 5 3/ HP Part # HP Part #90-004A $ Each HP Part #90-004B HP Part # HP Part # HP Part #90-004A $ Each HP Part #90-004B HP Part # COMPLETE NOVA TOOL COMPLETE NOVA TOOL 45º Compact Angle Head with Compact 3000 Motor 45º Compact Angle Head with Compact High Torque 850 Motor 45º Compact Angle Head with Compact 6000 Motor 45º Compact Angle Head with Compact 3200 Motor Lbs. $ A Lbs. $ B Lbs. $ C Lbs. $ Long Reach 45º Compact Angle with Compact 3000 Motor Long Reach 45º Compact Angle with Compact High Torque 850 Motor Long Reach 45º Compact Angle with Compact 6000 Motor Long Reach 45º Compact Angle with Compact 3200 Motor Lbs. $ A Lbs. $ B Lbs. $ C Lbs. $
13 NOVA 90º COMPACT FLAT OFFSET ANGLE HEAD COMPACT NOVA SYSTEM KIT 850, 3000, 3200 or / 1" 1 3/1 7/1 3/ 2" # Weight.4 Lbs. $ EACH Specify Motor Housing.3HP 850, 3000, or HP 3200 One Year Warranty 5/1 5 3/ HP. Part # HP Part #90-004A $ Each COMPLETE NOVA TOOL 90º Compact Flat Offset Angle with Compact 3000 Motor 90º Compact Flat Offset Angle with Compact High Torque 850 Motor 90º Compact Flat Offset Angle with Compact 6000 Motor 90º Compact Flat Offset Angle with Compact 3200 Motor HP Part #90-004B HP Part # Lbs. $ A Lbs. $ B Lbs. $ C Lbs. $ ATTACHMENT CHOICES Nova 360º Compact Angle Head - Part # p. 19 Nova 90º Compact Angle Head - Part # p. 20 Nova Long Reach 90º Compact Angle Head - Part # p. 21 Nova 45º Compact Angle Head - Part # p. 22 Nova Long Reach 45º Compact Angle Head - Part # p. 23 Nova 90º Compact Flat Offset Angle Head - Part # p. 24 Motor Housing and Your Choice of Any 4 Attachments HP Part # $ HP Part #60-056A $ HP Part #60-056B $ HP Part #60-056C $ Motor Housing and All 6 Attachments HP Part # $ HP Part #60-057A $ HP Part #60-057B $ HP Part #60-057C $
14 NOVA PISTOL GRIP DRILLS NOVA COMPACT PISTOL GRIP DRILL 2600, 3200, 4000 or 5500 NOVA COMPACT PISTOL GRIP DRILL NOVA.5 HORSEPOWER PISTOL GRIP DRILL NOVA COMPACT HIGH PISTOL GRIP DRILL 1 1/ 2600, 3200, 4000 or or 650 See Page 27 See Page 28 See Page 29 NOVA HIGH PISTOL GRIP DRILL NOVA HEAVY DUTY REVERSIBLE 3/8 PISTOL GRIP DRILL NOVA COMPACT REVERSIBLE DRILL or 3100 See Page 30 NOVA COMPLETE MOTOR MOUNTED MICRO-STOP CAGE 2600, 3200 or 4000 See Page 31 See Page 32 NOVA PISTOL GRIP DRILL CUT AWAY 2 1 Feathering Trigger Allows Operator Complete Control of Drilling Speed 360 Rotatable Exhaust Rubber Grip for Operator Comfort 2600 with 1/ Chuck and Key Part # $ Each 2600 with 1/ Keyless Chuck Weight 1.9 Lbs. Part #60-300B $ Each See Page with 1/ Chuck and Key Part # $ Each 4000 with 1/ Keyless Chuck Weight 1.9 Lbs. Part #60-310B $ Each 5 1. Precision Chuck with 3/8-24 Thread 2. Close Case Bearings 3. Air Inlet 1/4-18 NPT Rotatable Exhaust with Bronze Muffler 5. Housing Milled from Solid Stock for Precision Operation 6. Feathering Trigger Allows Operator Complete Control of Drilling Speed 7. Hardened Alloy Gears with 1/ Chuck and Key Part # $ Each 5500 with 1/ Chuck and Key Part # $ Each 3200 with 1/ Keyless Chuck Weight 1.9 Lbs. Part #60-312B $ Each 5500 with 1/ Keyless Chuck Weight 1.9 Lbs. Part #60-314B $ Each 26 27
15 NOVA HORSEPOWER PISTOL GRIP DRILL NOVA 1300 HIGH COMPACT PISTOL GRIP DRILL 6 3/ 1 1/ 1 1/ 60 In.-Lbs. Torque Feathering Trigger Allows Operator Complete Control of Drilling Speed 360 Rotatable Exhaust Rubber Grip for Operator Comfort 1300 with 1/ Chuck and Key Weight 1.9 Lbs. Part # $ Each 1300 with 1/ Keyless Chuck Weight 2.3 Lbs. Part #60-313A $ Each 1300 with 3/8" Chuck and Key Weight 2.2 Lbs. Part #60-313B $ Each 1300 with 3/8" Keyless Chuck Weight 2.7 Lbs. Part #60-313C $ Each.5 HP Motor For Extended Torque Feathering Trigger Allows Operator Complete Control of Speed 360 Rotatable Exhaust Rubber Grip for Operator Comfort Quiet Smooth Operation NOVA 650 HIGH COMPACT PISTOL GRIP DRILL 1 1/ 6 3/ 2400 with 1/ Chuck and Key Weight 1.6 Lbs. Part # $ Each 2400 with 3/8" Chuck and Key Weight 1.9 Lbs. Part #60-600B $ Each 2400 with 1/ Keyless Chuck Weight 2 Lbs. Part #60-600A $ Each 2400 with 3/8" Keyless Chuck Weight 2.4 Lbs. Part #60-600C $ Each 70 In.-Lbs. Torque Feathering Trigger Allows Operator Complete Control of Drilling Speed 360 Rotatable Exhaust Rubber Grip for Operator Comfort 650 with 1/ Chuck and Key Weight 1.9 Lbs. Part # $ Each 650 with 1/ Keyless Chuck Weight 2.3 Lbs. Part #60-450A $ Each 650 with 3/8" Chuck and Key Weight 2.2 Lbs. Part #60-450B $ Each 650 with 3/8" Keyless Chuck Weight 2.7 Lbs. Part #60-450C $ Each 28 29
16 NOVA 900 HIGH PISTOL GRIP DRILL NOVA 2000 HEAVY DUTY REVERSIBLE 3/8" PISTOL GRIP DRILL 7" 7 5/8" 1 3/8" 1 5/8" 95 In.-Lbs. Torque Feathering Trigger Allows Operator Complete Control of Drilling Speed 360 Rotatable Exhaust Rubber Grip for Operator Comfort 900 with 3/8" Chuck and Key Weight 2.5 Lbs. Part #60-008B $ Each Reversing Button Located for Superior Control 65 In.-Lbs. Torque Feathering Trigger Allows Operator Complete Control of Drilling Speed Rubber Grip for Operator Comfort 2000 with 3/8" Chuck and Key Weight 2.9 Lbs. Part # $ Each 900 with 1/ Keyless Chuck Weight 2.6 Lbs. Part #60-008H $ Each 900 with 3/8" Keyless Chuck Weight 2.9 Lbs. Part #60-008K $ Each 30 31
17 NOVA COMPACT REVERSING DRILL 2000 or 3100 NOVA COMPLETE MOTOR MOUNTED MICRO-STOP CAGE 2600, 3200 or /8" 7 3/ 1 1/ 1 1/8" 3 Also Available With Nylon Foot Piece Reversing Button Located for Superior Control Feathering Trigger Allows Operator Complete Control of Drilling Speed 360 Rotatable Exhaust Rubber Grip for Operator Comfort Feathering Trigger Allows Operator Complete Control of Speed For Precision Depth Control 360 Rotatable Exhaust Rubber Grip for Operator Comfort 2000 with 1/ Chuck and Key Weight 1.75 Lbs. Part #60-300R $ Each 3100 with 1/ Chuck and Key Weight 1.75 Lbs. Part #60-310R $ Each 2600 Pistol Grip Drill Weight 1.6 Lbs. Part # $ Each 3200 Pistol Grip Drill Weight 1.6 Lbs. Part #19-369A $ Each 4000 Pistol Grip Drill Weight 1.6 Lbs. Part #19-369B $ Each 2600 Pistol Grip Drill Weight 1.6 Lbs. Part #19-369N - with Nylon Foot Piece $ Each 3200 Pistol Grip Drill Weight 1.6 Lbs. Part #19-369AN - with Nylon Foot Piece $ Each 4000 Pistol Grip Drill Weight 1.6 Lbs. Part #19-369BN - with Nylon Foot Piece $ Each 32 33
18 NOVA FLAT OFFSET ANGLE ATTACHMENTS OPTIONAL ACCESSORIES Part # Part # Part # Part # Part # Part # Part # Part # Part # /1 5/1 1/ Shank 3" 1 5/1 Accepts 1/4-28 Bits Chuckable 1/ Shank Grease Fitting for Lubrication Flat Offset Design for Easy Access # Weight.4 Lbs. $90.00 EACH 1/4-B Chuck with Key 3/8-24 Thread Weight.3 Lbs Part # $24.00 Each O" Series Chuck with Threaded Adapter and Key Part # $50.00 Each 3/8" Chuck with Key 3/8-24 Thread Weight.6 Lbs Part # $30.00 Each 1/ Keyless Chuck with Wrench 3/8-24 Thread Weight.7 Lbs Part # $41.00 Each 7/1 5/1 7/1 5/1 5 3/ 1/ Shank 4 3/8" 1/ Shank 1 5/1 1 5/1 Accepts 1/4-28 Bits Chuckable 1/ Shank Grease Fitting for Lubrication Flat Offset Design for Easy Access # Weight.6 Lbs. $ EACH Accepts 1/4-28 Bits Chuckable 1/ Shank Grease Fitting for Lubrication Flat Offset Design for Easy Access # Weight.7 Lbs. $ EACH Precision Miniature 3 Jaw Chuck Precision Ground Hardened Jaws Weight.8 Lbs 1/1 through 1/ Drill Diameter Capacity Fits tools with 1/4-28 Spindle. Part # $30.00 Each Micro-Stop Cage 1/4-28 Threaded Shaft 3/32" Shaft Travel 5/8" Cutter Capacity Rated at 3000 Part # $15.00 Each 1/4-28 Threaded Chuck Adapter Part # $12.00 Each 1/ Straight x 1/4-28 Adapter Pin Part # $12.00 Each 3/8" Keyless Chuck with Wrench Weight 1.1 Lbs Part # $50.00 Each Swivel Air Regulator For Control of Speed and Torque Part # $12.00 Each 1/ Straight Taper Adapter Pin Part # $12.00 Each 9/32-40 Threaded Collets Other Size Available Upon Request #40 Aircraft Collet Part # $8.50 Each #21 Aircraft Collet Part # $8.50 Each #30 Aircraft Collet Part # $8.50 Each #10 Aircraft Collet Part # $8.50 Each 34 35
19 CLECO INSTALLATION TOOLS NOVA CLECO INSTALLATION TOOL Ergonomic Handle 360º Swivel Mount Pistol Grip Quiet Operation Air Inlet 1/4 NPT Weight 1.6 Lbs. Part # $60.00 Each NOVA HEX NUT CLECO INSTALLATION TOOL 9 1/ 13/1 2 3/8" NOVA CLECO INSTALLATION TOOL EXTRA LONG Ergonomic Handle 360º Swivel Mount Pistol Grip Quiet Operation Air Inlet 1/4 NPT 5 1/ Weight 1.9 Lbs. #20-112XL $66.00 Each NOVA CLECO INSTALLATION TOOL Ergonomic Handle 360º Swivel Mount Straight Handle Quiet Operation 8 Polyurethane Load Hose Air Inlet 1/4 NPT Weight.75 Lbs. Part # $50.00 Each CLECO PLIERS WITH SOFT HANDLE Installs Cleco-Lok C, CC, CL & CHD fasteners Installs Monogram M, MM, ML, MEL & MHD fasteners Installs Kwik-Lok K, KK, KT, KL, KEL & KHD fasteners Made from forged steel and nickel plated to resist wear and abuse. Pliers are compatible with all spring-loaded types of sheet metal clamps. Part # $5.50 Each 2000 Reversing Button Located for Superior Control Feathering Trigger Allows Operator Complete Control of Speed Maximum Air Pressure: 90 PSI Rubber Grip for Operator Comfort Quiet Smooth Operation Weight 2.1 Lbs. Part # $ Each Swivel Air Regulator Included* Part # $12.00 Each * Also Sold Separately On Page
20 NOVA 90º GRINDER 3" 1 3/8" Maximum Air Pressure: 90 PSI Standard Equipment Includes: 1/ Erikson Collet Two Collet Wrenches Capacity: 1/2" Diameter Carbide Burr 1" Mounted Wheel 3" Cut off Wheel Features:.3 HP Air Inlet: 1/4-18 NPT Motor housing milled from solid bar for precision. Motor cylinder and rotor are hardened alloy steel to ensure proper alignment and long life. NOVA PENCIL GRINDER 60,000 1/8" Collet Hardened Alloy Steel Cylinder With Over Hose Muffler Motor housing milled from solid Aluminum bar for precision 5/8" 5 3/8" Maximum Air Pressure 90 PSI Includes Two Wrenches, Hose, and Air Fitting Weight 7.5 Oz. Part # ,000 Part # $ Each 12,000 Part #60-036A $ Each NOVA STRAIGHT GRINDER 1 3/8" 5 3/8" Maximum Air Pressure: 90 PSI Standard Equipment Includes: 1/ Erikson Collet Two Collet Wrenches Capacity: 1/2" Diameter Carbide Burr 1" Mounted Wheel 3" Cut off Wheel Features:.3 HP Air Inlet: 1/4-18 NPT Motor housing milled from solid bar for precision. Motor cylinder and rotor are hardened alloy steel to ensure proper alignment and long life. ENGRAVING PEN Part # $50.00 Each STYLUS Part # $16.00 Each 25,000 Weight.75 Lbs. Part # $ Each 38 39
P33 Series Modular Drills Redefining Productivity Through Innovation
Redefining Productivity Through Innovation High Performance Ergonomics P33 Series Non-ube Modular Drills Ingersoll-Rand is yet again redefining productivity through innovation. This time we ve married
Tool Holder Catalog INDEX ABC VDI 25 LL3602.30051-10.04.2014. 0414/Rö
Tool Holder Catalog INDEX ABC VDI 25 LL3602.30051-10.04.2014 0414/Rö Disclaimer The illustrations in this documents may deviate from the delivered product. We reserve the right to make changes due to errors
Angle & General Line Drills
Angle & General Line Drills Michigan Pneumatic MP31DRST 1/4" Air Drill Reversible Features a forward/reverse switch and a twospeed trigger. Durable composite motor housing and planetary gear system with
Drive shaft, servicing
Volkswagen Passat B6 - Drive shaft, servicing Стр. 1 из 41 40-7 Drive shaft, servicing Drive shafts, overview I - Assembly overview: Drive axle with CV joint VL100 40-7, Drive axle with CV joint VL100,
YUASA MILLING MACHINE ACCESSORIES & TOOLS
97 HORIZONTAL / VERTICAL 5C COLLET INDEX 550 series 2 YEAR WARRANTY Spindle is manufactured with a taper seat in body frame. Rapid opening and closing is performed with a level collet closer with a leverage
L I V E T O O L F O R O K U M A
L I V E T O O L F O R O K U M A The Way to Success [Heimatec headquarters-germany] Heimatec is an international manufacturing company headquartered in Renchen, Germany. Heimatec s 40,000 square foot facility,
RIVET BUSTERS. 9949 Tabor Place, Santa Fe Springs, California, CA 90670, U.S.A.
S Website: www.apt-tools.com e-mail: info@apt-tools.com TDS-1038 Rev A S TOOL MAINTENANCE & REPAIR INFORMATION FIELD OPERATION: Before use: 1. Fill and attach an in-line oiler to the air tool. Use air
Providing Answers For All Your Machine Tool Needs
Providing Answers For All Your Machine Tool Needs STANDARD FEATURES FANUC MXP-200FA CONTROL Spindle Features Body Structure POWERFUL 20 HP H / L SHIFTING SPINDLE MOTOR HARDENED & GROUND BOXWAY CONSTRUCTION
About Us HAAS Tooling for CNC Turning Centers
About Us WHO IS EPPINGER? Eppinger CNC tool holders to DIN 69880 are manufactured to precision levels far in excess of the required standards using advanced, patented produciton systems and facilities.
Number Wheeler P/N Description Set Rex P/N Notes
1 607051 Base 1 A050 2 607052 Motor Cover 1 A052 3 600778 Socket Hd Cap Screw (M8x60) 2 4 607053 Scrap Receiver 1 A053 5 607054 Tank Upper Cover 1 A054 6 607055 Oil Pot 1 A055 7 607056 Strainer 1 A056
Assembly and Usage Instructions
Assembly and Usage Instructions A Product 5885 West Van Horn Tavern Road Columbia, MO 65203 www.caldwellshooting.com Instruction #1001667 Limited Warranty Every Caldwell product is warrantied to be free
Milling Chuck Features
Milling Chuck Features Since its first introduction into the industry in 1963, Nikken has sold over 2,000,000 worldwide and never stopped improving its original design. Featuring multi-roller bearings
SERVICE PARTS LIST PAGE 1 OF 6 BASE ASSEMBLY SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 12" DUAL BEVEL COMPOUND MITER SAW B27A
PAGE 1 OF 6 BASE ASSEMBLY 00 0 EXAMPLE: Component Parts (Small #) Are Included When Ordering The Assembly (Large #). SPECIFY CATALOG NO. AND NO. WHEN ORDERING PARTS 1 02-80-0050 Thrust Bearing (1) 2 05-80-0510
MP-4V Heavy Duty Riveter / 39048
MP-4V Heavy Duty Riveter / 39048 This newly designed heavy-duty air/hydraulic riveter is ergonomically designed with the professional in mind. The light weight 3.7 lbs. well balanced MP-4V includes a Vacuum
LU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions
LORTONE LU6X-130 Item # 061-092 LU6X Basic Item # 061-090 LU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions Introduction The LU6X is one the most versatile pieces of equipment
DYNA RIDER FOOTBOARD KIT
-J0 REV. 0-0-0 DYNA RIDER FOOTBOARD KIT GENERAL Kit Number 000 Models For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English
cbperformance.com Please read this entire brochure prior to installing your CB Performance Products MAGNASPARK II distributor.
- Easy -wire installation with no external spark box necessary, but can be used with one. - Precision CNC machining and hand assembled construction. This is a premium product. - Accurate super hot spark
NEW ZEPHYR TOOL GROUP LOK-FAST ZHP-200B, ZHP-100B. Zephyr's new Ergonomic Offset Hi-Lok Removal Plier. HI-LOK OFFSET PLIERS
EPHY O U P TOOLS ENINEEED TO PEFOM HP-200B, HP-100B HI-LOK OFFSET PLIES NEW LOK-FAST HP-200B For fasteners sizes: 5/16", 5/8" and 3/4" HP-100B For fasteners sizes: 5/32", 3/16", 1/4" and 5/16" ephyr's
Installation Instructions
85-3976 rev. 05 08-13 Installation Instructions Thank you for purchasing this antisway bar kit. Please read through these instructions before installation. Rear Anti-Sway Bar Kit for Dodge Ram Pick-Up
Number Wheeler P/N Description Set Rex P/N Notes
1 604041 Base 1 4041 2 604042 Base Cover 1 4042 3 608849 Washer (M5) 2 4 600124 Spring Washer (M5) 2 5 600329 Rd Hd Machine Screw (M5x8) 2 6 604047 Strainer 1 4047 7 600204 Rd Hd Machine Screw (M6x10)
Tool Holder Catalog TRAUB TNX 65/42 VDI 30 HSK 40 142856-21.02.2014. 0214/Rö
Tool Holder Catalog TRAUB TNX 65/42 VDI 30 HSK 40 142856-21.02.2014 0214/Rö Disclaimer The illustrations in this documents may deviate from the delivered product. We reserve the right to make changes due
CORDLESS SCREWDRIVER + LAMP
CORDLESS SCREWDRIVER + LAMP Lightweight for fatigue-free work Ergonomically perfect design for any application Ideal for processing small and medium screws Magnetic bit holder Forward and reverse running
Owner s Manual Read and keep this manual. Patents World Wide
Owner s Manual Read and keep this manual. Patents World Wide S & S Industries, Inc., Sarasota, FL, USA www.trail-gator.com Copyright 2008 All Rights Reserved The following manual is provided to assist
Lathe Milling Attachment
Lathe Milling Attachment By L C. MASON BY CLEVERLY stacking cold-rolled flat stock together, T-slots and slide for this lathe milling attachment are made without costly machinery. In fact, only two tools,
AXLE SHAFTS - FRONT. 1998 Pontiac Bonneville MODEL IDENTIFICATION DESCRIPTION & OPERATION TROUBLE SHOOTING REMOVAL & INSTALLATION
AXLE SHAFTS - FRONT 1998 Pontiac Bonneville 1998-99 DRIVE AXLES FWD Axle Shafts - Cars - "C", "G" & "H" Bodies GM Aurora, Bonneville, Eighty Eight, LeSabre, LSS, Park Avenue, Regency, Riviera MODEL IDENTIFICATION
CHICAGO PNEUMATIC SPRING 2013. Gyldig til 30062013. Alle priser i NOK, nto. eks. mva. Maintenance. People. Passion. Performance.
CHICAGO PNEUMATIC SPRING 2013 Gyldig til 30062013 Alle priser i NOK, nto. eks. mva. Maintenance People. Passion. Performance. CP7729 CP7748 2172,- ³ ₈, 563 Nm, 1,26 kg Art nr 894 107 7290 2333,- ½, 1250
MODEL T200-F18 MODEL T125-F18 Finish Nailers
P MODEL T200-F18 MODEL T125-F18 Finish Nailers IMPORTANT! DO NOT DESTROY It is the customer s responsibility to have all operators and service personnel read and understand this manual. OPERATING MANUAL
TECHNICAL INFORMATION
TECHNICAL INFORMATION P 1 / 5 Model No. Description 8390D Cordless Percussion Driver Drill 13mm CONCEPT AND MAIN APPLICATIONS Model 8390D has been developed by adding percussion mechanism to Model 6390D.
SPECIAL OFFER. Vehicle Service. spring 2014. People. Passion. Performance. Tools. Valid to 20140630
SPECIAL OFFER spring 2014 Valid to 20140630 Vehicle Service Tools People. Passion. Performance. CP7729 ³ 8, 563 Nm, 1,2 kg Art nr 894 107 7290 CP7739 ½, 610 Nm, 1,2 kg Art nr 894 107 7390 CP7749Q ½, 983
Propeller Equipment Sale. For Questions please contact Dan Cork Propdoc@aol.com 918-636-3567
Propeller Equipment Sale For Questions please contact Dan Cork Propdoc@aol.com 918-636-3567 Propeller Equipment Sale The equipment for sale is used in the repair and overhaul of aircraft propellers. Propeller
Number Wheeler P/N Description Set Rex P/N Notes 1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8)
1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8) 4 5 600130 Spring Washer (8mm) 4 6 600344 Roll Pin (M6x30) 4 7 600129 Socket Hd Cap Screw (M8x25) 4 8
Wheel Accessory Products Catalog
Wheel Accessory Products Catalog Table of Contents Heavy Duty Trucks - Chrome Accessories One-Piece Hub Cover System...2 Alcoa Wheel Kits...3-4 Alcoa Hug-A-Lug Nut Covers...5-6 Heavy Duty Trucks - Maintenance
Front axle components, overview
just a test. Front axle components, overview 40-1 General Information Load bearing components and parts of the suspension must not be welded or straightened. Vehicles without drive axle must not be moved,
SELF-STEERING AXLE TABLE OF CONTENTS
SELF-STEERING AXLE TABLE OF CONTENTS Section 1 - Introduction Section 2 - Pre-Installation Check List Section 3 - Ride Height Adjustments Section 4 - Suspension Mount Section 5 - Axle Mount Section 6 -
Makes bends greater than 90 in a single operation
TurnPro Tools TurnPro Indexing Tube Bender TurnPro HTB Indexing Handle Tube Bender Makes bends greater than 90 in a single operation Eliminates crossed handles Noassembly andreassembly ofbenderhandles
ANSI APPROVED 04/11/2014 ANSI APPROVED 08/17/2011. 45 Reaffirmation ANSI APPROVED 02/28/2014. 45 Reaffirmation ANSI APPROVED 05/06/2013
STANDARDS STATUS REPORT As of November 4, 2015 Note: Dates in RED indicate the last action taken; Highlighted Items Indicate New/Open Items; Grey items have been closed Document TC Status Comments ASME
16 April 2012 1032011-F 1994-2002 Dodge Adjustable Track bar with Relocation Bracket 1
16 April 2012 1032011-F 1994-2002 Dodge Adjustable Track bar with Relocation Bracket 1 BD Adjustable Track Bar w/bracket Dodge 2500-3500 4WD Models 1994-2002 Dodge 1500 4WD Model 1994-2001 P/N# 1032011-F
Important Safety Information
3 Cut-Off Wheel Tool INSTRUCTIONS MANUAL 25,000 RPM 76 mm (3 in), 20,000 RPM 100 mm (4 in), 12,000 RPM 115 mm (4.5 in), 12,000 RPM 125 mm (5 in), and 10,000 RPM 152 mm (6 in) Important Safety Information
It's large enough to handle most welding job shop projects, yet small enough to make it a worth while home-workshop tool
It's large enough to handle most welding job shop projects, yet small enough to make it a worth while home-workshop tool H Craft Print Project No. 272 ERE'S a metal bender that will enable you to bend
ASSEMBLY DIAGRAM AND ASSEMBLY REFERENCE ULTIMA OLD SCHOOL 2 EVO & TC BELT DRIVE UNITS
ASSEMBLY DIAGRAM AND ASSEMBLY REFERENCE ULTIMA OLD SCHOOL 2 EVO & TC BELT DRIVE UNITS BELT DRIVE ASSEMBLIES Part# 58-850 2 Old School Belt Drive Assembly - Polished Part# 58-851 2 Old School Belt Drive
Tube Type Oil Skimmer Comparison
Process Overview- Tube Type Oil Skimmers Oil flows down the face of the skimmer and into a sludge pan that is plumbed to a barrel. Model BG01 & BG34 or 6V Oil Skimmer 1.0 or 3/4 Diameter Collector Tube
CHIPPING HAMMERS. 9949 Tabor Place, Santa Fe Springs, California, CA 90670, U.S.A.
CHIPG HAMMERS Website: www.apt-tools.com e-mail: info@apt-tools.com TDS-1056 Rev A CHIPG HAMMERS TOOL MAINTENANCE & REPAIR INFORMATION FIELD OPERATION: Before use: 1. On 650 Series tools, tighten the handle
HT3 series Peck Feed Drills, with Equal Drill Time
Parts Manual Ersatzteil Liste PL92-280 HT3 series Peck Feed Drills, with Equal Drill Time HT3 SERIES PECK DRILL HT 3 C 005 S E 40 RPM Family Spindle B = 1/2-20 Male Thread, Jacobs Chuck C = 3/8-24 Female
Assembling an AR-15 Parts CheckList:
Assembling an AR-5 Parts CheckList: Table of Contents Upper Receiver Common Parts... A, A2 & A3 sights... 2-3 BARREL COMPONENTS... 4-5 BOLT & BOLT CARRIER COMPONENTS... 6 LOWER RECEIVER COMMON PARTS...
Installation Instructions GOOSENECK MOUNTING KIT Chevrolet/GMC 1500/2500/3500 All except 4-door Crew-Cab
GOOSENECK MOUNTING KIT Equipment Required: Fastener Kit: F Wrenches: 3/4, 7/8, 15/16 Drill Bits: 1/4 Other Tools: Drill WARNING: Under no circumstances do we recommend exceeding the towing vehicle manufacturers
TUBE-AUGER Tube End Prep Machine Kit For ¾ 3 Tube ID (EP443010)
TM-33 Elliott offers a complete line of precision tube tools, including: tube expanders Boiler Expanders Heat Exchanger Expanders Condenser Expanders Refinery Expanders tube rolling motors & torque controls
Rating when used as a weight carrying hitch without spring bars:
BOLT-TOGETHER WEIGHT DISTRIBUTING HITCH SYSTEM Rating when used as a weight distributing hitch with spring bars: Part Number 48051 4805 48053 48054 Max Tongue Weight 550 Ibs. 750 Ibs. 1000 Ibs. 1400 lbs.
Pipe Cutting and Beveling Clamshells
Pipe Cutting and Beveling Clamshells Who We Are One Company, Total Support, Complete Solutions For more than a century, Hydratight has provided world-class bolted joint solutions and continues to set international
Table of Contents WARNING SYMBOLS AND DEFINITIONS
Table of Contents SAFETY INSTALLATION OPERATION MAINTENANCE Safety... 2 Specifications... 4 Installation... 5 Operation... 8 WARNING SYMBOLS AND DEFINITIONS Maintenance... 9 Parts List and Assembly Diagram...
Chief EZ Liner S21 PARTS MANUAL. 1999 Chief Automotive Systems, Inc.
Chief EZ Liner S21 R 1999 Chief Automotive Systems, Inc. CHIEF EZ LINER CHIEF S LIMITED ONE-YEAR WARRANTY & LIABILITY Chief Automotive Systems, Inc. warrants for one year from date of installation and/or
Step-by-step instructions:
Spark plug thread repair for Ford Triton cylinder heads Step-by-step instructions: Identification Installation Verification Specifically designed and tested for 4.6L, 5.4L, and 6.8L 2 and 4 valve heads,
MONITOR SECTION INDEX
MONITOR SECTION INDEX Daspit Tool... E2 Daspit Tool - Truck Mount... E3 Daspit Tool - Throw Down Model... E4 Alpha MA-HV4-4 Aluminum Tiller Bar Monitor... E5 Alpha-E Tiller Bar Montior - 3... E6 SharpShooter
TRACTOR QUICK HITCH CATEGORY I
TRACTOR QUICK HITCH CATEGORY I Assembly, Operation & Parts Manual January 2005 Form: Quickhitch.PM7 SAFETY INFORMATION To avoid accident or injury, do not allow anyone to operate this equipment without
Trillium 40 Axis Spring Tensioner Wire Replacement Instructions
Trillium 40 Axis Spring Tensioner Wire Replacement Instructions 1 Overview The objective is to replace the broken axis spring tensioner wire. This requires the following tasks: 1. Remove the seismometer
Installation Guide 2010 BMW S1000RR Full Exhaust System
Installation Guide 2010 BMW S1000RR Full Exhaust System!! THIS PRODUCT IS DESIGNED FOR USE IN CLOSED COURSE RACING AND IS NOT INTENDED FOR HIGHWAY USE!! Congratulations on the purchase of your new TaylorMade
$117.99 $31.99 $39.99 $23.99. Things to consider when buying your next socket set:
D004006 47 Piece 6 Point Standard/Deep SAE/Metric Socket Set SAE Standard: 3/16"-9/16" SAE Deep: 3/16"-9/16" Metric Standard: 4-14 mm Metric Deep: 4-12 mm 2", 6" Extensions Hand Driver U-Joint 45 Tooth
4200 Malsbary Road Cincinnati, OH 45242 Phone (513) 984-5544 Fax (513) 984-5580
PRECISION LIVE TOOLING & MACHINE TOOL ACCESSORIES MADE IN THE USA 4200 Malsbary Road Cincinnati, OH 45242 Phone (513) 984-5544 Fax (513) 984-5580 Patent Pending Live Tooling Planet Products Corporation
Deluxe Welding Tool Chest
Item# 164782 OPERATOR S MANUAL Read carefully and understand RULES FOR SAFE OPERATION and instructions before operating. Failure to follow the safety rules and other basic safety precautions may result
TITAN 13 x 2 ½ BRAKES
INSTALLATION INSTRUCTION AND SERVICE MANUAL Actuator/Trailer Dealer - Please provide these instructions to the consumer. Consumer - Read and follow these instructions. Keep them with the trailer for future
Model RC Armature-Slot- Insulation Folder
Model RC Armature-Slot- Insulation Folder 21 Model RC will handle insulation material up to 8 wide between its guides. Creasing rollers are adjustable sideways to make troughs up to 6 wide. A fixed ruler-guide
OPERATING INSTRUCTION MANUAL FOR S-240 HYDRAULIC CUTTERS WITH PARTS LIST
HUSKIE TOOLS, INC. OPERATING INSTRUCTION MANUAL FOR S-240 HYDRAULIC CUTTERS WITH PARTS LIST GENERAL INFORMATION GUIDE FOR S-240 CUTTER The following steps are guidelines for safe operation of the Huskie
PRISLISTE - SPERO NORGE AS Plus Line - 2015 RE : (compact) AU- 2A Dato : Des. 31, 2014
3 02-211- 719BMF 19PC 1/4" Dr. Socket Set w/swivel Universal Ratchet Wrench-6PT-Metric (4,4.5,5,5.5,6,7,8,9,10,11,12,13,14mm) 857,71 3 02-311- 722BMF 22PC 3/8" Dr. Socket Set w/swivel Universal Ratchet
ECM-D70T / ECM-D70T1.5
Elliptical Ceiling Dual Mount for 37 to 50 Flat Panels INSTALLATION INSTRUCTIONS CREATING POSITIVE CUSTOMER EXPERIENCES 9531-041-001-01 Contents ECM-D70T / ECM-D70T1.5 Installation Tools... 3 Parts List...
Wanda Technology Inc. Side Post Aluminum Umbrella OWNER S MANUAL
Wanda Technology Inc. Side Post Aluminum Umbrella Portofino II Series OWNER S MANUAL US Patents: 6,439,249 ; 6,692,135 ; 6,598,990 ; 6,966,667 6,945,263 ; 6,923,194 ; 6,830,058 ; 6,565,060 6,511,033 ;
Tools Spares Guide. The POP Tools Spares Guide is a users and buyers manual which assists in the identification of required spare parts.
Tools Spares Guide Tools Spares Guide The POP Tools Spares Guide is a users and buyers manual which assists in the identification of required spare parts. Throughout the guide you will find:- Exploded
Equipped with AEM Dryflow Filter No Oil Required! INSTALLATION INSTRUCTIONS PART NUMBER 21-754DS. 2012-2015 BMW 335i 3.0L
Equipped with AEM Dryflow Filter No Oil Required! INSTALLATION INSTRUCTIONS PART NUMBER 21-754DS 2012-2015 BMW 335i 3.0L 1 ITEM NO. PART NUMBER DESCRIPTION QTY. 1 21-2057DK AIR FILTER 1 2 9-0442 TUBE;
Model # 940P-V6. Page 1 of 11
Model # 940P-V6 Page 1 of 11 Page 2 of 11 WARRANTY & TERMS WARRANTY: 5 Year Limited Warranty on Thermoplastic coated elements. Ultra Play guarantees all items for one full year to be free of defects in
Speed-Mat Rectangle Cutter
Speed-Mat Rectangle Cutter 1 Honeycomb baseboard. 2 Left hold down. 14 3 Bottom hold down. 4 4 Left / right rule. 8 5 8 5 Left / right rule pointer. 1 6 Top / bottom rule. 7 Top / bottom rule pointer.
POWERS Controls No. 4 Pneumatic Damper Actuator
POWERS Controls No. 4 Pneumatic Damper Actuator Technical Instructions Document No. 155-032P25 AP 331-2 Actuator Assembly 331-2929 Typical Actuator Assembly 331-2904 Typical Actuator Assembly 331-3000
The Speed of Live and the Accuracy of Fixed
The Speed of Live and the Accuracy of Fixed SG10A CYLINDER HEAD SEAT & GUIDE MACHINE Light Weight Work Head The SG10A has a light weight work head for fast and accurate centering for the minimum concentricity.
NAGEL ECO 180 FLEXIBLE HONING SYSTEM
NAGEL ECO 180 FLEXIBLE HONING SYSTEM NEW DEVELOPMENT For Small and Medium Production Runs In-process gauging, Roughing and finishing in a single spindle Tel: 734-426-1812 www.nagelusa.com MACHINE HIGHLIGHTS
tire inflator with pressure gauge
tire inflator with pressure gauge Model 95583 Assembly And Operation Instructions Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks
S&G Model 2937 Group 1 Combination Lock
Installation and Combination Changing Instructions S&G Model 2937 Group 1 Combination Lock NOTE: READ COMPLETE INSTRUCTIONS BEFORE INSTALLATION These instructions should be followed when installing the
SPECIAL OFFER AUTUMN 2015
SPECIAL OFFER AUTUMN 2015 Impact wrenches CP7732 Art nr 8941077320 Ultra Compact & Powerful 1/2 Best power to weight ratio: 610 Nm Steel front cover & Aluminum body One hand operation forward reverse by
1. Lay out 2 pieces of 7/8" tubing and mark for bending as shown. Remember that the bend is in the shaded area as shown below in Figure 1.
MINI BIKE PLANS Page 1 INTRODUCTION Before starting to build your Mini-Bike, be sure that you have all the parts shown on the material list. You will note that tubing has been used in the construction.
Installation Guide for the TJ LCG PRO Suspension System (Low Center of Gravity) Available 4 or 5
INSTALLATION GUIDE Installation Guide for the TJ LCG PRO Suspension System (Low Center of Gravity) Available 4 or 5 Take every precaution to make this installation a safe procedure. Make safety the number
WIRE ROPE CUTTERS. Designed for new and unused wire rope. Since 1928
WIRE ROPE CUTTERS Designed for new and unused wire rope Since 1928 IMPACT 101 104 106 108 103 105 107 109 Model 1 (light duty): Model 1 3 /4 capacity 101 Cutter complete 8 lbs. 102 Casting base 4 lbs.
TechCut 4 Precision Low Speed Saw
Product Brochure TechCut 4 Precision Low Speed Saw 3" - 6" Blade Range Digital Speed Display 1-Micron Sample Indexing Spring-Loaded Dressing Stick Attachment All Aluminum & Stainless Steel Construction
2
10 MECHANICAL DRIVE SWING AWAY AUGER PARTS LIST SERIAL NOS. 70000-74773 1 2 # PART # DESCRIPTION 1 B198362 Boot Access Cover 2 B030500 Side Wind Jack 3 B003049 PTO Shaft - Constant Velocity 4 B027504 Boot
758 Heavy-duty Ratchet Guy Wire Cutter
INSTRUCTION MANUAL 758 Heavy-duty Ratchet Guy Wire Cutter Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. Register this product
STEERING SYSTEM - POWER
STEERING SYSTEM - POWER 1990 Nissan 240SX 1990 STEERING Nissan - Power Rack & Pinion Axxess, Maxima, Pulsar NX, Sentra, Stanza, 240SX, 300ZX DESCRIPTION The power steering system consists of a rack and
ELECTRIC KNIFE SHARPENER
PRODUCT MANUAL- M109 MODEL 401 ELECTRIC KNIFE SHARPENER Please read thoroughly before operation and keep for future reference Model 401 Knife Sharpener Specifications Model No. #401 Power Requirements
Advantages and application of PCD and CBn tools
PCD and CBN tools Advantages and application of PCD and CBn tools Powerful and economical Tools with PCD and CBN cutting edges are the ideal solution for difficult-to machine, highly abrasive materials.
Multi-Pitch Pitching Machine USER MANUAL
Multi-Pitch Pitching Machine USER MANUAL TABLE OF CONTENTS Thank you for purchasing the Cimarron Multi-Pitch Pitching Machine. The Cimarron Multi-Pitch Pitching Machine is a high performance pitching machine
ANGLgear. right angle drives Inch and Metric Series. The Original Right Angle Gear Drive Made in the U.S.A.
ANGLgear right angle drives Inch and Metric Series The Original Right Angle Gear Drive Made in the U.S.A. INDEX INTRODUCTION Intro to ANGLgear Inch & Metric Series pg. 2-3 2 Flange Units, Inch Series pg.
TECHNICAL INFORMATION
TECHNICAL INFORMATION Models No. 2012NB Description 304mm (12") Automatic Thickness Planer CONCEPTION AND MAIN APPLICATIONS * Compact and light weight (27 Kg./59 lbs) automatic thickness planer for easier
CAMaster Options for the Stinger Line of CNC Machines
CAMaster Options for the Stinger Line of CNC Machines Recoil Indexing Lathe (All Stingers) The Indexing Lathe is mounted on the side of the machine so it does not interfere with the table top when it is
ABRASIVES HAND TOOLS MATERIAL HANDLING LIFTING EQUIPMENT
AIR TOOLS CATALOGUE 2013 2014 Locations JET products are available from a broad distribution network throughout Canada. We support this network with our own system of warehouses in Vancouver, Edmonton,
QSI Auto-Focus Mounting Bracket
QSI Auto-Focus Mounting Bracket The camera mounting bracket makes extensive use of sliding dovetails. The dovetail joint gets immense strength from a trapezoidal pin trapped in a slot. The internal flats
Chief S21M PARTS MANUAL. 2005 Chief Automotive Technologies
Chief SM 00 Chief Automotive Technologies Chief s Limited One-Year Warranty & Liability CHIEF'S LIMITED ONE-YEAR WARRANTY & LIABILITY Chief Automotive Technologies, Inc. warrants for one year from date
UFO 1 FOLDER INDEX A2 FOLDING MACHINE TYPE 10060 LIST NO DESCRIPTION PAGE 10101M Main Assembly - Mechanical 2 10201M Main Roller Assembly 4 16101M Upper & Lower Perforator Shaft Assembly 6 12701M Primary
OWNER S MANUAL DRAINVAC ATOMIK PRINTED APRIL 4-2011
OWNER S MANUAL th DRAINVAC ATOMIK PRINTED APRIL 4-2011 INTRODUCTION We take this opportunity to express our gratitude and extend our congratulations for your decision to purchase a Drainvac product. A
Thank You For Choosing. INSTALLATION INSTRUCTIONS Portal Gear Hubs Polaris RZR 800. (installation performed on 60 Model) (Right) (Left)
740B Clifty Drive Madison, Indiana 47250 812-574-7777 INSTALLATION INSTRUCTIONS Portal Gear Hubs Polaris RZR 800 A (installation performed on 60 Model) Item Description Qty A Rotor 4 B Gear Box, L 2 C
Rebuild Instructions for 70001 and 70010 Transmission
Rebuild Instructions for 70001 and 70010 Transmission Brinn, Incorporated 1615 Tech Drive Bay City, MI 48706 Telephone 989.686.8920 Fax 989.686.6520 www.brinninc.com Notice Read all instructions before
Oceanscience Cable Chimp II Cableway ROV System User Guide and Warranty
Oceanscience Cable Chimp II Cableway ROV System User Guide and Warranty Page 1 Table of Contents Introduction Page 3 Overview Page 3 Setup and Operation Page 5 Remote Control Page 6 Power Management Page
Digital Fingerprint safe
Digital Fingerprint safe Model 96846 Operation Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product
LEADER IN CUTTING TECHNOLOGY
LEADER IN CUTTING TECHNOLOGY FOR OVER 2 YEARS REASONS WHY TRONEX IS THE BEST IN THE WORLD 1 2 SUPERIOR CUTTING PERFORMANCE Cut hundreds of thousands of times before dulling. Cut hundreds of thousands of
Operating Instruction Manual For S-40B Hydraulic Cutters With Parts List
HUSKIE TOOLS, INC. Operating Instruction Manual For S-40B Hydraulic Cutters With Parts List GENERAL INFORMATION GUIDE FOR S-40B CUTTER The following steps are guidelines for safe operation of the Huskie
Parts#MB003-003 Reverse Gear MAMBA (Monoblock for Cable operated) For 5 speed Trans., '87 to '06 Big Twin models (except '06 Dyna)
Installation Instructions Reverse Gear MAMBA (Monoblock for Cable operated) Read and become familiar with these installation instructions before start. Two Piece for H-D 5 Speed Trans., Cable operated
Important: Please read these instructions carefully and completely before starting the installation. TITAN Fuel Tanks
TITAN pt. no.: 03 0000 0120 Important: Please read these instructions carefully and completely before starting the installation. TITAN Fuel Tanks INSTALLATION INSTRUCTIONS G e n e r a t i o n V Extended