RClamp7512N. Low Capacitance TVS for LVDS Interfaces. PROTECTION PRODUCTS - RailClamp Description. Features. Mechanical Characteristics.
|
|
- Walter Flowers
- 7 years ago
- Views:
Transcription
1 - RailClam Descrition RailClam TS diode arrays are secifically designed to rotect sensitive comonents which are connected to high-seed data and transmission lines from overvoltage caused by ESD (electrostatic discharge), CDE (Cable Discharge Events), and EFT (electrical fast transients). The unique design incororates surge rated, low caacitance steering diodes and a TS diode in a single ackage. During transient conditions, the steering diodes direct the transient current through the internal TS diodes safely to to ground. The RClam 72N is constructed using Semtech s rorietary EPD rocess technology. The EPD rocess rovides low oerating voltage (2.) with significant reductions in leakage current and caacitance over silicon-avalanche diode rocesses. It features high surge (I=A, t=8/2μs) and ESD (+/-2k er IEC 6--2) caability with low claming voltage. The RClam72N is in a SLP2N2 ackage. It measures. x 2. x.6. The leads are finished with lead-free NiPdAu. The flow through design is otimized for use on 2-layer c boards. Each device will rotect u to twelve high-seed lines. The combination of small size, low caacitance, and high ESD and surge caability makes them ideal for use in alications such as next generation color LCD dislays and LDS interfaces. RClam72N Low Caacitance TS for LDS Interfaces Features Transient rotection for high-seed data lines to IEC 6--2 (ESD) ±k (air), ±2k (contact) IEC 6-- (EFT) A (/ns) IEC 6-- (Lightning) A (8/2μs) Array of surge rated diodes with internal TS Diode Flow-Through routing otimized for 2-layer cb Small ackage saves board sace Protects u to twelve I/O lines Low caacitance (<F) for high-seed interfaces Low leakage current and claming voltage Low oerating voltage: 2. Solid-state silicon-avalanche technology Mechanical Characteristics SLP2N2 ackage Pb-Free, Halogen Free, RoHS/WEEE Comliant Nominal Dimensions:. x 2. x.6 Lead Finish: NiPdAu Molding comound flaability rating: UL 9- Marking : Marking code + Date code Packaging : Tae and Reel Alications TCONN chi Protection 2-Layer PCB LDS Interfaces LCD T Circuit Diagram PIN Configuration 2 2 I/O I/O 2 I/O I/O I/O I/O 6 I/O 2 I/O I/O I/O 9 I/O 8 I/O 7 Circuit Diagram (2 Total Protection Circuits) Revision 9/26/2 Pin Assignments (To iew)
2 RClam72N Absolute Maximum Rating Rating Symbol alue Units Peak Pulse Power (t = 8/2μs) P k Watts Peak Pulse Current (t = 8/2μs) I P P A ESD er IEC 6--2 (Air) ESD er IEC 6--2 (Contact) ESD +/- +/-2 k Oerating Temerature T J - to +2 C Storage Temerature T STG to + - C Note: ) Electrical Characteristics (T=2 o C) Parameter Symbol Conditions Minimum Tyical Maximum Units Reverse Stand-Off WM R. 2 Punch-Through PT I PT = 2μA 2.7 Sna-Back SB I SB = ma 2. Reverse Leakage Current I R RWM = 2., T=2 C Claming C = A, t = 8/2μs Claming C = A, t = 8/2μs Claming C = A, t = 8/2μs Forward F = A, t = 8/2μs to Any I/O Forward F = A, t = 8/2μs to Any I/O Junction Caacitance C j Between I/O ins and Ground = - 2., f = R R Between I/O ins = - 2., f =. μa F 2. F 2 Semtech Cor. 2
3 RClam72N Tyical Characteristics Non-Reetitive Peak Pulse Power vs. Pulse Time Power Derating Curve Peak Pulse Power - P PP (kw)... Pulse Duration - t (us) % of Rated Power or IPP Ambient Temerature - T A ( o C) Surge Current Outut Waveform (t = 8/2us) Claming vs. Peak Pulse Current (t = 8/2us) Percent of e -t td = /2 Waveform Parameters: tr = 8µs td = 2µs Claming - C () Waveform Parameters: tr = 8µs td = 2µs Time (µs) Peak Pulse Current - (A) Froward vs. Peak Pulse Current to any I/O (t = 8/2us) Normalized Caacitance vs. Reverse ().. Forward () Waveform Parameters: tr = 8µs td = 2µs Cj(R) / Cj(R=) f = Peak Pulse Current (A) Reverse - R() 2 Semtech Cor.
4 RClam72N Tyical Characteristics Insertion Loss S2 (I/O to Gnd) Insertion Loss S2 (I/O to I/O) CH S2 LOG 6 db / REF db CH S2 LOG 6 db / REF db : db 8 : db 8 db 2: db 9 db 2: -.22 db 9-6 db -2 db -8 db 2 : db.8 : -.77 db db -2 db -8 db 2 : -.9 db.8 : -.89 db db -2 db - db - db -6 db -6 db -2 db -2 db -8 db START. STOP. -8 db START. STOP. 2 Semtech Cor.
5 RClam72N Alications Information Device Connection Otions for Protection of Twelve High-Seed Data Lines Pin Configuration (To iew) This device is designed to rotect u to twelve highseed data lines. It has been otimized for use on LDS interfaces. The RClam72N is constructed using Semtech s rorietary EPD rocess technology. The EPD rocess rovides low stand-off (turn-on) voltages with significant reductions while maintaining good claming characteristics and high surge caability. They feature a true oerating voltage of 2. volts. The characteristics of the RClam72N eliminate the need to add an external resistor for rotection of LDS interfaces. Each in (-2) is internally connected to a rotection circuit. The ins are slightly staggered to allow clearance for routing traces u to. wide with sacing between traces. This flow through design means that the RClam72N can be used on PC boards with as few as 2-layers. The device also features two center ground tabs. These ads rovide a low inductance ath for the surge current to ground. The low inductance ground ath is esecially critical for reducing the claming voltage during ESD events. I/O I/O 2 I/O I/O I/O I/O 6 I/O 2 I/O I/O I/O 9 I/O 8 I/O 7 Layout Examle 2 Semtech Cor.
6 RClam72N Outline Drawing - SLP2N2 PIN INDICATOR (LASER MARK) aaa C A2 A D B E A A. C SEATING PLANE DIMENSIONS MILLIMETERS DIM MIN NOM MAX A.6.6 A A2.. (.). b..2.2 b..2. D...6 E e BSC e.6 BSC e2. BSC e. BSC L... L.2.. L2... L.9.. N 2 bbb aaa..8 SEE DETAIL A. 2.6 E/2.2. e C L. 2X L. N e2 e e bxn bbb C A B 2X L X b DETAIL A NOTES:. CONTROLLING DIMENSIONS ARE IN MILLIMETERS (ANGLES IN DEGREES). LxN D/2 C L. 2X L2 Land Pattern - SLP2N2. P P. X (C) Y2.7 (X).6 G Y Y X X Z DIMENSIONS DIM MILLIMETERS C (2.) G.7 P P.6 P2. X.2 X.2 Y.6 Y. Y2.9 Z....6 P2 NOTES:. CONTROLLING DIMENSIONS ARE IN MILLIMETERS (ANGLES IN DEGREES). 2. THIS LAND PATTERN IS FOR REFERENCE PURPOSES ONLY. CONSULT YOUR MANUFACTURING GROUP TO ENSURE YOUR COMPANY'S MANUFACTURING GUIDELINES ARE MET. 2 Semtech Cor. 6
7 RClam72N Marking Ordering Information PIN INDICATOR (LASER MARK) 72N YYWW Part Number RClam72N.TCT Lead Finish Qty er Reel Reel Size NiPdAu 7 Inch RailClam and RClam are marks of Semtech Cororation YYWW = Date Code Tae and Reel Secification Pin Location User Direction of feed Device Orientation in Tae A B K 2.8 +/ / /-. Tae Width B, (Max) D D E F K (MAX) P P P 2 T(MAX) W ). ±..7±..±.. 8.±..±. 2.±.. 2. ±. Contact Information Semtech Cororation Protection Products Division 2 Flynn Rd., Camarillo, CA 92 Phone: (8)98-2 FAX (8) Semtech Cor. 7
LC03-3.3. Low Capacitance 3.3 Volt TVS for High Speed Interfaces. PROTECTION PRODUCTS Description. Features. Applications
Descrition The LC3-3.3 transient voltage suressor is designed to rotect comonents which are connected to high seed data and telecommunication lines from voltage surges caused by lightning, electrostatic
More informationRClamp0504P RailClamp Low Capacitance TVS Array
- RailClamp Description RailClamps are low capacitance TVS arrays designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive components which are connected
More informationLCDA12C-8 and LCDA15C-8
ROTECTION RODUCTS Descrition The LCDAxxC-8 has been secifically designed to rotect sensitive comonents which are connected to data and transmission lines from over voltages caused by electrostatic discharge
More informationRClamp2574NQ. High Power TVS for Ethernet Interfaces. PROTECTION PRODUCTS - RailClamp Description. Features. Mechanical Characteristics.
- Raillam Descrition Raillam TS diodes are secifically designed to rotect sensitive comonents which are connected to high-seed data and transmission lines from overvoltage caused by ESD (electrostatic
More informationRClamp0502BA. Ultra-Low Capacitance TVS for ESD and CDE Protection. PROTECTION PRODUCTS - RailClamp Description. Features. Mechanical Characteristics
- RailClamp Description RailClamp TS diodes are specifically designed to protect sensitive components which are connected to high-speed data and transmission lines from overvoltage caused by ESD (electrostatic
More informationRClamp0821P. Ultra-Low Capacitance 1-Line ESD protection. PROTECTION PRODUCTS - RailClamp Description. Features. Mechanical Characteristics
- RailClamp Description The RailClamp family is a series of ultra low capacitance Transient oltage Suppressors (TS) designed to protect high speed data interfaces. This series has been specifically designed
More informationLC03-6. Low Capacitance TVS for High-Speed Data Interfaces. Features. Description. Mechanical Characteristics. Applications
Description The LC0- transient voltage suppressor is designed to protect components which are connected to high speed telecommunication lines from voltage surges caused by lightning, electrostatic discharge
More informationSDC15. TVS Diode Array for ESD Protection of 12V Data and Power Lines. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics
Description The SDC15 transient voltage suppressor (TVS) is designed to protect components which are connected to data and transmission lines from voltage surges caused by electrostatic discharge (ESD),
More informationSD05C through SD24C. Single Line TVS Diode for ESD Protection in Portable Electronics PRELIMINARY Features. PROTECTION PRODUCTS Description
Descrition The SDxxC TS diodes are designed to relace multilayer varistors (MLs) in ortable alications such as cell hones, notebook comuters, and DA s. They offer suerior electrical characteristics such
More informationRClamp0522PA RClamp0524PA
PROTECTION PRODUCTS - RailClamp Description RailClamp TVS arrays are ultra low capacitance ESD protection devices designed to protect high speed data interfaces. This series has been specifically designed
More informationuclamp3301d Low Voltage µclamp TM for ESD and CDE Protection PROTECTION PRODUCTS - MicroClamp TM Description Features Mechanical Characteristics
MicroClamp TM Description The µclamp TM series of Transient oltage Suppressors (TS) are designed to replace multilayer varistors (MLs) in portable applications such as cell phones, notebook computers,
More informationuclamp3301h Low Voltage μclamp TM for ESD and CDE Protection PRELIMINARY Features
PROTECTION PRODUCTS -MicroClamp Description The μclamp series of Transient Suppressors (TVS) are designed to replace multilayer varistors (MLVs) in portable applications such as cell phones, notebook computers,
More informationµclamp3601p TVS Diode for Proximity Switch Input Protection PROTECTION PRODUCTS - MicroClamp Description Features Mechanical Characteristics
PRTECTIN PRDUCTS - MicroClamp Description The µclamp P is a high-surge transient voltage suppressor (TVS) optimized for protection of sensitive digital sensors used in proximity switches and industrial
More informationSMS05C through SMS24C
ROTECTION RODUCTS Descrition The SMS series of TS arrays are designed to rotect sensitive electronics from damage or latch-u due to ESD and other voltage-induced transient events. Each device will rotect
More informationLC05-6. Dual Low Capacitance TVS Array for Telecom Line-Card Applications. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics
Description The LC5-6 has been specifically designed to protect sensitive components which are connected to highspeed telecommunications lines from over voltages caused by lightning, electrostatic discharge
More informationuclamp0541z Ultra Small μclamp 1-Line ESD Protection
- Z-Pak TM Description μclamp TVS diodes are designed to protect sensitive electronics from damage or latch-up due to ESD. It is designed to replace 2 size multilayer varistors (MLVs) in portable applications
More informationRClamp0522P RClamp0524P
PROTECTION PRODUCTS - RailClamp Description RailClamp TVS arrays are ultra low capacitance ESD protection devices designed to protect high speed data interfaces. This series has been specifically designed
More informationRClamp0514M RailClamp Low Capacitance TVS Diode Array PRELIMINARY Features
RailClamp Description RailClamps are ultra low capacitance TVS arrays designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive components which are
More informationSLVU2.8. PROTECTION PRODUCTS Absolute Maximum Rating. Electrical Characteristics I T I PP V R I PT I F. www.semtech.com. 2008 Semtech Corp.
Description The SL series of transient voltage suppressors are designed to protect low voltage, state-of-the-art MOS semiconductors from transients caused by electrostatic discharge (ESD), cable discharge
More informationLC01-6. Low Capacitance TVS for High-Speed Telecommunication Systems. PROTECTION PRODUCTS Description. Features. Applications
escription The transient voltage suppressor is designed to protect components which are connected to high speed telecommunication lines from voltage surges caused by lightning, electrostatic discharge
More informationSMF05C. TVS Diode Array For ESD and Latch-Up Protection PRELIMINARY. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics
Description The SMF series TVS arrays are designed to protect sensitive electronics from damage or latchup due to ESD and other voltageinduced transient events. They are designed for use in applications
More informationSTF203-15 THRU STF203-33
Description The STF03 is a combination EMI filter and line termination device with integrated diodes for use on upstream USB ports. It is constructed using a proprietary technology that allows passive
More informationSTF201-22 & STF201-30
Description The STF201 is a combination EMI filter and line termination device with integrated TVS diodes for use on downstream USB ports. It is constructed using a proprietary technology that allows passive
More informationSM712 Series 600W Asymmetrical TVS Diode Array
SM712 Series 6W Asymmetrical TVS Diode Array RoHS Pb GREEN Description The SM712 TVS Diode Array is designed to protect RS-485 applications with asymmetrical working voltages (-7V to from damage due to
More informationTClamp1272S Low Capacitance TClamp Surge Protection for xdsl Interfaces
- TransClamp Description The TClamp 1272S provides dedicated line driver side srge and ESD protection for ADSL and VDSL applications. It is designed to replace mltiple discrete components in portable applications.
More informationSM Series 400W TVS Diode Array
General Purpose ESD Protection - SM5 through SM3 SM Series W TVS Diode Array RoHS Pb GREEN Description The SM series TVS Diode Array is designed to protect sensitive equipment from damage due to electrostatic
More informationLC03-6R2G. Low Capacitance Surface Mount TVS for High-Speed Data Interfaces. SO-8 LOW CAPACITANCE VOLTAGE SUPPRESSOR 2 kw PEAK POWER 6 VOLTS
Low Capacitance Surface Mount TVS for High-Speed Data terfaces The LC3- transient voltage suppressor is designed to protect equipment attached to high speed communication lines from ESD, EFT, and lighting.
More informationNUP4106. Low Capacitance Surface Mount TVS for High-Speed Data Interfaces SO 8 LOW CAPACITANCE VOLTAGE SUPPRESSOR 500 WATTS PEAK POWER 3.
Low Capacitance Surface Mount TVS for High-Speed Data Interfaces The NUP0 transient voltage suppressor is designed to protect equipment attached to high speed communication lines from ESD and lightning.
More informationRClamp 3354S Low Voltage RClamp Surge Protection for GbE Interfaces
- RailClamp Description RailClamp TVS diodes are specifi cally designed to protect sensitive components which are connected to high-speed data and transmission lines from overvoltage cased by ESD (electrostatic
More informationNUP2105L, SZNUP2105L. Dual Line CAN Bus Protector SOT 23 DUAL BIDIRECTIONAL VOLTAGE SUPPRESSOR 350 W PEAK POWER
Dual Line CAN Bus Protector The SZ/NUP215L has been designed to protect the CAN transceiver in high speed and fault tolerant networks from ESD and other harmful transient voltage events. This device provides
More informationSC603 CHARGE PUMP REGULATOR WITH SELECTABLE 5.0V/4.5V OUTPUT POWER MANAGEMENT
Description The SC603 is a versatile charge pump designed for use in battery operated power supply applications. The wide input range is matched for Li-Ion battery applications. nly two tiny ceramic bucket
More informationESD9X3.3ST5G Series, SZESD9X3.3ST5G Series. Transient Voltage Suppressors Micro Packaged Diodes for ESD Protection
ESD9X3.3ST5G Series, SZESD9X3.3ST5G Series Transient Voltage Suppressors Micro Packaged Diodes for ESD Protection The ESD9X Series is designed to protect voltage sensitive components from ESD. Excellent
More informationESD7484. 4-Line Ultra-Large Bandwidth ESD Protection
4-Line Ultra-Large Bandwidth ESD Protection Functional Description The ESD7484 chip is a monolithic, application specific discrete device dedicated to ESD protection of the HDMI connection. It also offers
More informationCAN bus ESD protection diode
Rev. 04 15 February 2008 Product data sheet 1. Product profile 1.1 General description in a small SOT23 (TO-236AB) Surface-Mounted Device (SMD) plastic package designed to protect two automotive Controller
More informationHow To Test A Sidactor Series For A Power Supply
SDP Series - SOT23-5 RoHS Pb e3 Description This new SIDACtor series is targeted for the tertiary or line driver side protection position for VDSL2+, ADSL2 applications and general I/O protection functions.
More information1.5SMC6.8AT3G Series, SZ1.5SMC6.8AT3G Series. 1500 Watt Peak Power Zener Transient Voltage Suppressors. Unidirectional*
.6.8AT3G Series, SZ.6.8AT3G Series 00 Watt Peak Power Zener Transient Voltage Suppressors Unidirectional* The series is designed to protect voltage sensitive components from high voltage, high energy transients.
More informationESDLIN1524BJ. Transil, transient voltage surge suppressor diode for ESD protection. Features. Description SOD323
Transil, transient voltage surge suppressor diode for ESD protection Datasheet production data Features Max peak pulse power 160 W (8/0 µs) Asymmetrical bidirectional device Stand-off voltage: 15 and 4
More information1SMB59xxBT3G Series, SZ1SMB59xxT3G Series. 3 Watt Plastic Surface Mount Zener Voltage Regulators
9xxBTG Series, SZ9xxTG Series Watt Plastic Surface Mount Zener Voltage Regulators This complete new line of W Zener diodes offers the following advantages. Features Zener Voltage Range. V to V ESD Rating
More informationCM1213A-04SO, SZCM1213A-04SO 4-Channel Low Capacitance ESD Protection Array
CM1213A-04SO, SZCM1213A-04SO 4-Channel Low Capacitance ESD Protection Array Product Description CM1213A 04SO has been designed to provide ESD protection for electronic components or subsystems requiring
More informationFeatures. Applications. Truth Table. Close
ASSR-8, ASSR-9 and ASSR-8 Form A, Solid State Relay (Photo MOSFET) (0V/0.A/0Ω) Data Sheet Description The ASSR-XX Series consists of an AlGaAs infrared light-emitting diode (LED) input stage optically
More information1N59xxBRNG Series. 3 W DO-41 Surmetic 30 Zener Voltage Regulators
W DO-4 Surmetic 0 Zener Voltage Regulators This is a N9xxBRNG series with limits and excellent operating characteristics that reflect the superior capabilities of silicon oxide passivated junctions. All
More informationPHOTOTRANSISTOR OPTOCOUPLERS
MCT2 MCT2E MCT20 MCT27 WHITE PACKAGE (-M SUFFIX) BLACK PACKAGE (NO -M SUFFIX) DESCRIPTION The MCT2XXX series optoisolators consist of a gallium arsenide infrared emitting diode driving a silicon phototransistor
More informationFeatures. Modulation Frequency (khz) VDD. PLL Clock Synthesizer with Spread Spectrum Circuitry GND
DATASHEET IDT5P50901/2/3/4 Description The IDT5P50901/2/3/4 is a family of 1.8V low power, spread spectrum clock generators capable of reducing EMI radiation from an input clock. Spread spectrum technique
More informationPDS5100H. Product Summary. Features and Benefits. Mechanical Data. Description and Applications. Ordering Information (Note 5) Marking Information
Green 5A HIGH VOLTAGE SCHOTTKY BARRIER RECTIFIER POWERDI 5 Product Summary I F V R V F MAX (V) I R MAX (ma) (V) (A) @ +25 C @ +25 C 1 5..71.35 Description and Applications This Schottky Barrier Rectifier
More informationETP01-xx21. Protection for Ethernet lines. Features. Description. Applications. Benefits. Complies with the following standards
ETP0-xx2 Protection for Ethernet lines Features Differential and common mode protection Telcordia GR089 Intrabuilding: 50 A, 2/0 µs ITU-T K20/2: 40 A, 5/30 µs Low capacitance: 3 pf max at 0 V UL94 V0 approved
More informationOne-Chip Linear Control IPS, F5106H
One-Chi Linear Control IPS, F5106H NAKAGAWA Sho OE Takatoshi IWAMOTO Motomitsu ABSTRACT In the fi eld of vehicle electrical comonents, the increasing demands for miniaturization, reliability imrovement
More informationPESDxU1UT series. 1. Product profile. Ultra low capacitance ESD protection diode in SOT23 package. 1.1 General description. 1.
Rev. 02 20 August 2009 Product data sheet 1. Product profile 1.1 General description Ultra low capacitance ElectroStatic Discharge (ESD) protection diode in a SOT23 (TO-236AB) small SMD plastic package
More informationNTMS4920NR2G. Power MOSFET 30 V, 17 A, N Channel, SO 8 Features
NTMS9N Power MOSFET 3 V, 7 A, N Channel, SO Features Low R DS(on) to Minimize Conduction Losses Low Capacitance to Minimize Driver Losses Optimized Gate Charge to Minimize Switching Losses These Devices
More informationHigh Power Infrared Emitting Diode, 940 nm, GaAlAs/GaAs
TSAL64 High Power Infrared Emitting Diode, 94 nm, GaAlAs/GaAs DESCRIPTION 94 8389 TSAL64 is an infrared, 94 nm emitting diode in GaAlAs/GaAs technology with high radiant power molded in a blue-gray plastic
More informationOptocoupler, Phototransistor Output, 4 Pin LSOP, Long Creepage Mini-Flat Package
Optocoupler, Phototransistor Output, 4 Pin LSOP, Long Creepage Mini-Flat Package FEATURES A 4 C Low profile package High collector emitter voltage, V CEO = 8 V 7295-6 DESCRIPTION The has a GaAs infrared
More informationAAT4280 Slew Rate Controlled Load Switch
General Description Features SmartSwitch The AAT4280 SmartSwitch is a P-channel MOSFET power switch designed for high-side load switching applications. The P-channel MOSFET device has a typical R DS(ON)
More informationLIN-bus ESD protection diode
Rev. 3 31 May 2011 Product data sheet 1. Product profile 1.1 General description in a very small SOD323 (SC-76) Surface-Mounted Device (SMD) plastic package designed to protect one automotive Local Interconnect
More information1.5KE6.8A thru 1.5KE540A, 1N6267A thru 1N6303A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. www.vishay.
TRANSZORB Transient Voltage Suppressors Case Style.5KE FEATURES Glass passivated chip junction Available in uni-directional and bi-directional 500 W peak pulse power capability with a /0 μs waveform, repetitive
More informationSTIEC45-xxAS, STIEC45-xxACS
Transil TVS for IEC 61000-4-5 compliance Datasheet - production data differential mode MIL STD 883G, method 3015-7 Class 3B 25 kv HBM (human body model) Resin meets UL 94, V0 MIL-STD-750, method 2026 solderability
More informationCLA4607-085LF: Surface Mount Limiter Diode
DATA SHEET CLA4607-085LF: Surface Mount Limiter Diode Applications Low-loss, high-power limiters Receiver protectors Anode (Pin 1) Anode (Pin 3) Features Low thermal resistance: 55 C/W Typical threshold
More information1 Form A Solid State Relay
Form A Solid State Relay VOAT, VOAABTR FEATURES 9 S S DC S' 3 S' High speed SSR - t on /t off < 8 μs Maximum R ON. Isolation test voltage 3 V RMS Load voltage V Load current A DC configuration DIP- package
More informationTSM2N7002K 60V N-Channel MOSFET
SOT-23 SOT-323 Pin Definition: 1. Gate 2. Source 3. Drain PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (ma) 5 @ V GS = 10V 100 60 5.5 @ V GS = 5V 100 Features Low On-Resistance ESD Protection High Speed Switching
More informationP6KE6.8A thru P6KE540A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. www.vishay.com FEATURES PRIMARY CHARACTERISTICS
TRANSZORB Transient Voltage Suppressors DO-204AC (DO-15) PRIMARY CHARACTERISTICS V WM 5.8 V to 459 V V BR uni-directional 6.8 V to 540 V V BR bi-directional 6.8 V to 440 V P PPM 600 W P D 5.0 W I FSM (uni-directional
More informationASSR-1410, ASSR-1411 and ASSR-1420 General Purpose, Form A, Solid State Relay (Photo MOSFET) (60V/0.6A/1Ω) Features. Applications. Truth Table.
ASSR-, ASSR- and ASSR- General Purpose, Form A, Solid State Relay (Photo MOSFET) (V/.A/Ω) Data Sheet Lead (Pb) Free RoHS fully compliant RoHS fully compliant options available; -xxxe denotes a lead-free
More informationPRTR5V0U2F; PRTR5V0U2K
Rev. 02 19 February 2009 Product data sheet 1. Product profile 1.1 General description Ultra low capacitance double rail-to-rail ElectroStatic Discharge (ESD) protection devices in leadless ultra small
More informationHow To Make An Electric Static Discharge (Esd) Protection Diode
Rev. 01 0 October 2008 Product data sheet 1. Product profile 1.1 General description Ultra low capacitance bidirectional ElectroStatic Discharge (ESD) protection diodes in small Surface-Mounted Device
More informationFemtofarad bidirectional ESD protection diode
Rev. 3 24 October 2011 Product data sheet 1. Product profile 1.1 General description Femtofarad bidirectional ElectroStatic Discharge (ESD) protection diode in a leadless ultra small SOD882 Surface-Mounted
More information3-Channel Supervisor IC for Power Supply
3-Channel Supervisor IC for Power Supply Features Over-voltage protection and lockout Under-voltage protection and lockout Open drain power good output signal Built-in 300mS delay for power good 38mS de-bounce
More informationCAT4139. 22 V High Current Boost White LED Driver
22 V High Current Boost White LED Driver Description The CAT4139 is a DC/DC step up converter that delivers an accurate constant current ideal for driving LEDs. Operation at a fixed switching frequency
More information3EZ6.2D5 Series. 3 Watt DO-41 Surmetic 30 Zener Voltage Regulators
EZ6.D Series Watt DO- Surmetic Zener Voltage Regulators This is a complete series of Watt Zener diodes with limits and excellent operating characteristics that reflect the superior capabilities of silicon-oxide
More informationDSL01-xxxSC5. Secondary protection for DSL lines. Features. Description. Applications. Benefits. Complies with the following standards
-xxxsc5 Secondary protection for DSL lines Features Low capacitance devices: -xxxsc5: Delta C typ = 3.5 pf High surge capability: 30 A - 8/20 µs Voltage: 8 V, 10.5 V, 16 V, and 24 V RoHS package Benefits
More information2N6056. NPN Darlington Silicon Power Transistor DARLINGTON 8 AMPERE SILICON POWER TRANSISTOR 80 VOLTS, 100 WATTS
NPN Darlington Silicon Power Transistor The NPN Darlington silicon power transistor is designed for general purpose amplifier and low frequency switching applications. High DC Current Gain h FE = 3000
More informationICS650-44 SPREAD SPECTRUM CLOCK SYNTHESIZER. Description. Features. Block Diagram DATASHEET
DATASHEET ICS650-44 Description The ICS650-44 is a spread spectrum clock synthesizer intended for video projector and digital TV applications. It generates three copies of an EMI optimized 50 MHz clock
More informationIRLR8729PbF IRLU8729PbF
Applications l High Frequency Synchronous Buck Converters for Computer Processor Power l High Frequency Isolated DC-DC Converters with Synchronous Rectification for Telecom and Industrial Use Benefits
More informationPS323. Precision, Single-Supply SPST Analog Switch. Features. Description. Block Diagram, Pin Configuration, and Truth Table. Applications PS323 PS323
Features ÎÎLow On-Resistance (33-ohm typ.) Minimizes Distortion and Error Voltages ÎÎLow Glitching Reduces Step Errors in Sample-and-Holds. Charge Injection, 2pC typ. ÎÎSingle-Supply Operation (+2.5V to
More informationMMSZxxxT1G Series, SZMMSZxxxT1G Series. Zener Voltage Regulators. 500 mw SOD 123 Surface Mount
MMSZxxxTG Series, SZMMSZxxxTG Series Zener Voltage Regulators 5 mw SOD 3 Surface Mount Three complete series of Zener diodes are offered in the convenient, surface mount plastic SOD 3 package. These devices
More information1SMA5.0AT3G Series, SZ1SMA5.0AT3G Series. 400 Watt Peak Power Zener Transient Voltage Suppressors. Unidirectional
.AT3G Series, SZ.AT3G Series 4 Watt Peak Power Zener Transient Voltage Suppressors Unidirectional The series is designed to protect voltage sensitive components from high voltage, high energy transients.
More informationDATA SHEET. TDA8560Q 2 40 W/2 Ω stereo BTL car radio power amplifier with diagnostic facility INTEGRATED CIRCUITS. 1996 Jan 08
INTEGRATED CIRCUITS DATA SHEET power amplifier with diagnostic facility Supersedes data of March 1994 File under Integrated Circuits, IC01 1996 Jan 08 FEATURES Requires very few external components High
More informationLast Time Buy. Deadline for receipt of LAST TIME BUY orders: April 30, 2011
Last Time Buy This part is in production but has been determined to be LAST TIME BUY. This classification indicates that the product is obsolete and notice has been given. Sale of this device is currently
More informationHIGH SPEED-10 MBit/s LOGIC GATE OPTOCOUPLERS
DESCRIPTION The, /6 single-channel and /6 dual-channel optocouplers consist of a 5 nm AlGaAS LED, optically coupled to a very high speed integrated photodetector logic gate with a strobable output. This
More informationHigh Performance Schottky Rectifier, 1 A
High Performance Schottky Rectifier, A VS-MQNPbF Cathode Anode DO-24AC (SMA) PRODUCT SUMMARY Package DO-24AC (SMA) I F(AV) A V R V V F at I F.78 V I RM ma at 25 C T J max. 5 C Diode variation Single die
More informationDVIULC6-4SC6. Ultra low capacitance ESD protection. Main applications. Complies with these standards: Description. Benefits. Features.
Ultra low capacitance ESD protection Main applications DVI ports up to 1.65 Gb/s HDMI ports up to 1.65 Gb/s IEEE 1394a and IEEE 1394b ports up to 1.6 Gb/s USB2.0 ports up to 480 Mb/s (high speed), backwards
More information.OPERATING SUPPLY VOLTAGE UP TO 46 V
L298 DUAL FULL-BRIDGE DRIVER.OPERATING SUPPLY VOLTAGE UP TO 46 V TOTAL DC CURRENT UP TO 4 A. LOW SATURATION VOLTAGE OVERTEMPERATURE PROTECTION LOGICAL "0" INPUT VOLTAGE UP TO 1.5 V (HIGH NOISE IMMUNITY)
More informationSchottky Rectifier, 100 A
Schottky Rectifier, A VS-BGQ Cathode Anode PowerTab PRODUCT SUMMARY Package PowerTab I F(AV) A V R V V F at I F 0.82 V I RM 180 ma at 125 C T J max. 175 C Diode variation Single die E AS 9 mj FEATURES
More informationMetal-Oxide Varistors (MOVs) Surface Mount Multilayer Varistors (MLVs) > MLN Series. MLN SurgeArray TM Suppressor. Description
MLN SurgeArray TM Suppressor RoHS Description The MLN SurgeArray Suppressor is designed to help protect components from transient voltages that exist at the circuit board level. This device provides four
More informationBaseband delay line QUICK REFERENCE DATA
FEATURES Two comb filters, using the switched-capacitor technique, for one line delay time (64 µs) Adjustment-free application No crosstalk between SECAM colour carriers (diaphoty) Handles negative or
More informationP6KE. Transil, transient voltage surge suppressor (TVS) Features. Description. Complies with the following standards
Transil, transient voltage surge suppressor (TVS) Datasheet production data Features Peak pulse power: 600 W (10/0 µs ) Stand-off voltage range 6.8 to 440 V Unidirectional and bidirectional types Low clamping
More informationPower MOSFET FEATURES. IRF520PbF SiHF520-E3 IRF520 SiHF520. PARAMETER SYMBOL LIMIT UNIT Drain-Source Voltage V DS 100 V Gate-Source Voltage V GS ± 20
Power MOSFET PRODUCT SUMMARY (V) 100 R DS(on) ( ) = 0.7 Q g (Max.) (nc) 16 Q gs (nc) 4.4 Q gd (nc) 7.7 Configuration Single TO0AB G DS ORDERING INFORMATION Package Lead (Pb)free SnPb G D S NChannel MOSFET
More informationAN96-07. Surging Ideas TVS Diode Application Note PROTECTION PRODUCTS. TRANSIENT IMMUNITY STANDARDS: IEC 61000-4-x
TRANSIENT IMMUNITY STANDARDS: IEC 61000-4-x On January 1, 1996, exports into Europe began facing some tough transient immunity standards. The International Electrotechnical Commission (IEC), a worldwide
More informationIEC 1000-4-2 ESD Immunity and Transient Current Capability for the SP72X Series Protection Arrays
IEC 00-4-2 ESD Immunity and Transient Current Capability for the SP72X Series Protection Arrays Application Note July 1999 AN9612.2 Author: Wayne Austin The SP720, SP721, SP723, and SP724 are protection
More informationHigh-Bandwidth, Low Voltage, Dual SPDT Analog Switches
DG, DG High-Bandwidth, Low Voltage, Dual SPDT Analog Switches DESCRIPTION The DG/DG are monolithic CMOS dual single-pole/double-throw (SPDT) analog switchs. They are specifically designed for low-voltage,
More informationData Sheet. ACPL-077L Low Power 3.3 V / 5 V High Speed CMOS Optocoupler Design for System Level Reliability. Description. Features. Functional Diagram
ACPL-077L Low Power 3.3 V / 5 V High Speed CMOS Optocoupler Design for System Level Reliability Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available; -xxxe denotes
More informationLM1084 5A Low Dropout Positive Regulators
5A Low Dropout Positive Regulators General Description The LM1084 is a series of low dropout voltage positive regulators with a maximum dropout of 1.5 at 5A of load current. It has the same pin-out as
More information3mm Photodiode,T-1 PD204-6C/L3
3mm Photodiode,T-1 Features Fast response time High photo sensitivity Small junction capacitance Pb free This product itself will remain within RoHS compliant version. Description is a high speed and high
More informationCharacteristics Values Units. Rectangular waveform 0.5 A. range - 55 to 150 C
Bulletin I075 rev. C 05/06 IR0530CSPTRPbF 0.5 Amp 30 Volt Features Ultra Low V F To Footprint Area Very Low Profile (
More informationSmall Signal Fast Switching Diode
Small Signal Fast Switching Diode MECHANICAL DATA Case: SOD- Weight: approx.. mg Packaging codes/options: 8/K per " reel (8 mm tape), K/box 08/K per 7" reel (8 mm tape), K/box FEATURES Silicon epitaxial
More informationBZW50. Transil, transient voltage surge suppressor (TVS) Features. Description
Transil, transient voltage surge suppressor (TVS) Datasheet production data Features Peak pulse power: 5000 W (10/0 µs) Stand-off voltage range from 10 V to 180 V Unidirectional and bidirectional types
More informationUNISONIC TECHNOLOGIES CO., LTD 50N06 Power MOSFET
UNISONIC TECHNOLOGIES CO., LTD 50N06 50 Amps, 60 Volts N-CHANNEL POWER MOSFET DESCRIPTION TO-263 TO-25 The UTC 50N06 is three-terminal silicon device with current conduction capability of about 50A, fast
More informationMCC. www.mccsemi.com MMSZ4678 THRU MMSZ4716
omponents 2736 Marilla Street Chatsworth!"# $%!"# MMSZ4678 THRU MMSZ476 Features Zener Voltage.8V-39V Very Sharp Reverse Characteristic VZ tolerance ± 5% High Reliability Epoxy meets UL 94 V- flammability
More informationY.LIN ELECTRONICS CO.,LTD.
Features Current transfer ratio (CTR 50~600% at I F =5mA, V CE =5V) High isolation voltage between input and output (Viso=5000 V rms ) Creepage distance >7.62 mm Operating temperature up to +110 C Compact
More informationTable 1. Absolute maximum ratings (T amb = 25 C) Symbol Parameter Value Unit. ISO 10605 - C = 330 pf, R = 330 Ω : Contact discharge Air discharge
Automotive dual-line Transil, transient voltage suppressor (TVS) for CAN bus Datasheet - production data Complies with the following standards ISO 10605 - C = 150 pf, R = 330 Ω : 30 kv (air discharge)
More informationSC728/SC729. 2A Low Vin, Very Low Ron Load Switch. POWER MANAGEMENT Features. Description. Applications. Typical Application Circuit SC728 / SC729
POWER MANAGEMT Features Input Voltage Range 1.1V to 2A Continuous Output Current Ultra-Low Ron 36mΩ Automatic Output Discharge Circuit Fast Turn-on Option With No Output Discharge Circuit SC728 Extended
More informationMMBZ52xxBLT1G Series, SZMMBZ52xxBLT3G. Zener Voltage Regulators. 225 mw SOT 23 Surface Mount
MMBZ5xxBLTG Series, SZMMBZ5xxBLTG Series Zener Voltage Regulators 5 mw SOT Surface Mount This series of Zener diodes is offered in the convenient, surface mount plastic SOT package. These devices are designed
More informationA I DM. W/ C V GS Gate-to-Source Voltage ± 20. Thermal Resistance Symbol Parameter Typ. Max. Units
V DS 2 V V GS Max ± 2 V R DSon) max @V GS = V) 24 m * PD - 9787A HEXFET Power MOSFET R DSon) max @V GS = 4.V) 4 m 6 Micro3 TM SOT-23) Applications) Load System Switch Features and Benefits Features Benefits
More informationNSI45060JDT4G. Adjustable Constant Current Regulator & LED Driver. 45 V, 60 100 ma 15%, 2.7 W Package
NSI5JDTG Adjustable Constant Current Regulator & Driver 5 V, ma 5%, 2.7 W Package The adjustable constant current regulator (CCR) is a simple, economical and robust device designed to provide a cost effective
More information